diff options
| -rw-r--r-- | arch/arm/mach-imx/eukrea_mbimx27-baseboard.c | 2 | ||||
| -rw-r--r-- | arch/arm/mach-imx/mach-pca100.c | 4 | ||||
| -rw-r--r-- | arch/arm/mach-mx3/mach-mx31ads.c | 21 | ||||
| -rw-r--r-- | arch/arm/mach-mx3/mach-pcm037_eet.c | 2 | ||||
| -rw-r--r-- | arch/arm/mach-mx3/mach-pcm043.c | 10 | ||||
| -rw-r--r-- | arch/arm/mach-mx5/board-cpuimx51.c | 4 | ||||
| -rw-r--r-- | arch/arm/mach-mx5/board-mx51_3ds.c | 31 | ||||
| -rw-r--r-- | arch/arm/mach-mx5/board-mx51_babbage.c | 19 | ||||
| -rw-r--r-- | arch/arm/mach-mx5/board-mx51_efikamx.c | 17 |
9 files changed, 17 insertions, 93 deletions
diff --git a/arch/arm/mach-imx/eukrea_mbimx27-baseboard.c b/arch/arm/mach-imx/eukrea_mbimx27-baseboard.c index 275c8589d79..b6d68cfefde 100644 --- a/arch/arm/mach-imx/eukrea_mbimx27-baseboard.c +++ b/arch/arm/mach-imx/eukrea_mbimx27-baseboard.c @@ -357,13 +357,11 @@ void __init eukrea_mbimx27_baseboard_init(void) ads7846_dev_init(); #endif -#if defined(CONFIG_SPI_IMX) || defined(CONFIG_SPI_IMX_MODULE) /* SPI_CS0 init */ mxc_gpio_mode(GPIO_PORTD | 28 | GPIO_GPIO | GPIO_OUT); imx27_add_spi_imx0(&eukrea_mbimx27_spi0_data); spi_register_board_info(eukrea_mbimx27_spi_board_info, ARRAY_SIZE(eukrea_mbimx27_spi_board_info)); -#endif /* Leds configuration */ mxc_gpio_mode(GPIO_PORTF | 16 | GPIO_GPIO | GPIO_OUT); diff --git a/arch/arm/mach-imx/mach-pca100.c b/arch/arm/mach-imx/mach-pca100.c index cccc0a0a9c7..faa4e04006e 100644 --- a/arch/arm/mach-imx/mach-pca100.c +++ b/arch/arm/mach-imx/mach-pca100.c @@ -187,7 +187,6 @@ static struct i2c_board_info pca100_i2c_devices[] = { } }; -#if defined(CONFIG_SPI_IMX) || defined(CONFIG_SPI_IMX_MODULE) static struct spi_eeprom at25320 = { .name = "at25320an", .byte_len = 4096, @@ -211,7 +210,6 @@ static const struct spi_imx_master pca100_spi0_data __initconst = { .chipselect = pca100_spi_cs, .num_chipselect = ARRAY_SIZE(pca100_spi_cs), }; -#endif static void pca100_ac97_warm_reset(struct snd_ac97 *ac97) { @@ -389,13 +387,11 @@ static void __init pca100_init(void) imx27_add_imx_i2c(1, &pca100_i2c1_data); -#if defined(CONFIG_SPI_IMX) || defined(CONFIG_SPI_IMX_MODULE) mxc_gpio_mode(GPIO_PORTD | 28 | GPIO_GPIO | GPIO_IN); mxc_gpio_mode(GPIO_PORTD | 27 | GPIO_GPIO | GPIO_IN); spi_register_board_info(pca100_spi_board_info, ARRAY_SIZE(pca100_spi_board_info)); imx27_add_spi_imx0(&pca100_spi0_data); -#endif gpio_request(OTG_PHY_CS_GPIO, "usb-otg-cs"); gpio_direction_output(OTG_PHY_CS_GPIO, 1); diff --git a/arch/arm/mach-mx3/mach-mx31ads.c b/arch/arm/mach-mx3/mach-mx31ads.c index 88b97d62b57..e40eb6e2694 100644 --- a/arch/arm/mach-mx3/mach-mx31ads.c +++ b/arch/arm/mach-mx3/mach-mx31ads.c @@ -73,8 +73,7 @@ * This file contains the board-specific initialization routines. */ -#if defined(CONFIG_SERIAL_8250) || defined(CONFIG_SERIAL_8250_MODULE) -/*! +/* * The serial port definition structure. */ static struct plat_serial8250_port serial_platform_data[] = { @@ -110,14 +109,7 @@ static int __init mxc_init_extuart(void) { return platform_device_register(&serial_device); } -#else -static inline int mxc_init_extuart(void) -{ - return 0; -} -#endif -#if defined(CONFIG_SERIAL_IMX) || defined(CONFIG_SERIAL_IMX_MODULE) static const struct imxuart_platform_data uart_pdata __initconst = { .flags = IMXUART_HAVE_RTSCTS, }; @@ -134,11 +126,6 @@ static inline void mxc_init_imx_uart(void) mxc_iomux_setup_multiple_pins(uart_pins, ARRAY_SIZE(uart_pins), "uart-0"); imx31_add_imx_uart0(&uart_pdata); } -#else /* !SERIAL_IMX */ -static inline void mxc_init_imx_uart(void) -{ -} -#endif /* !SERIAL_IMX */ static void mx31ads_expio_irq_handler(u32 irq, struct irq_desc *desc) { @@ -476,7 +463,6 @@ static struct wm8350_platform_data __initdata mx31_wm8350_pdata = { }; #endif -#if defined(CONFIG_I2C_IMX) || defined(CONFIG_I2C_IMX_MODULE) static struct i2c_board_info __initdata mx31ads_i2c1_devices[] = { #ifdef CONFIG_MACH_MX31ADS_WM1133_EV1 { @@ -497,11 +483,6 @@ static void mxc_init_i2c(void) imx31_add_imx_i2c1(NULL); } -#else -static void mxc_init_i2c(void) -{ -} -#endif static unsigned int ssi_pins[] = { MX31_PIN_SFS5__SFS5, diff --git a/arch/arm/mach-mx3/mach-pcm037_eet.c b/arch/arm/mach-mx3/mach-pcm037_eet.c index fda56545d2f..df6fb07d037 100644 --- a/arch/arm/mach-mx3/mach-pcm037_eet.c +++ b/arch/arm/mach-mx3/mach-pcm037_eet.c @@ -180,9 +180,7 @@ static int __init eet_init_devices(void) /* SPI */ spi_register_board_info(pcm037_spi_dev, ARRAY_SIZE(pcm037_spi_dev)); -#if defined(CONFIG_SPI_IMX) || defined(CONFIG_SPI_IMX_MODULE) imx31_add_spi_imx0(&pcm037_spi1_pdata); -#endif platform_device_register(&pcm037_gpio_keys_device); diff --git a/arch/arm/mach-mx3/mach-pcm043.c b/arch/arm/mach-mx3/mach-pcm043.c index bcf83fc7e70..a515290f15f 100644 --- a/arch/arm/mach-mx3/mach-pcm043.c +++ b/arch/arm/mach-mx3/mach-pcm043.c @@ -115,7 +115,6 @@ static const struct imxuart_platform_data uart_pdata __initconst = { .flags = IMXUART_HAVE_RTSCTS, }; -#if defined CONFIG_I2C_IMX || defined CONFIG_I2C_IMX_MODULE static const struct imxi2c_platform_data pcm043_i2c0_data __initconst = { .bitrate = 50000, }; @@ -134,7 +133,6 @@ static struct i2c_board_info pcm043_i2c_devices[] = { I2C_BOARD_INFO("pcf8563", 0x51), } }; -#endif static struct platform_device *devices[] __initdata = { &pcm043_flash, @@ -312,13 +310,13 @@ static struct mxc_usbh_platform_data otg_pdata __initdata = { .portsc = MXC_EHCI_MODE_UTMI, .flags = MXC_EHCI_INTERFACE_DIFF_UNI, }; +#endif static const struct mxc_usbh_platform_data usbh1_pdata __initconst = { .portsc = MXC_EHCI_MODE_SERIAL, .flags = MXC_EHCI_INTERFACE_SINGLE_UNI | MXC_EHCI_INTERNAL_PHY | MXC_EHCI_IPPUE_DOWN, }; -#endif static const struct fsl_usb2_platform_data otg_device_pdata __initconst = { .operating_mode = FSL_USB2_DR_DEVICE, @@ -369,12 +367,10 @@ static void __init mxc_board_init(void) imx35_add_imx_uart1(&uart_pdata); -#if defined CONFIG_I2C_IMX || defined CONFIG_I2C_IMX_MODULE i2c_register_board_info(0, pcm043_i2c_devices, ARRAY_SIZE(pcm043_i2c_devices)); imx35_add_imx_i2c0(&pcm043_i2c0_data); -#endif mxc_register_device(&mx3_ipu, &mx3_ipu_data); mxc_register_device(&mx3_fb, &mx3fb_pdata); @@ -386,9 +382,9 @@ static void __init mxc_board_init(void) imx35_add_mxc_ehci_otg(&otg_pdata); } - - imx35_add_mxc_ehci_hs(&usbh1_pdata); #endif + imx35_add_mxc_ehci_hs(&usbh1_pdata); + if (!otg_mode_host) imx35_add_fsl_usb2_udc(&otg_device_pdata); diff --git a/arch/arm/mach-mx5/board-cpuimx51.c b/arch/arm/mach-mx5/board-cpuimx51.c index f8652ef25f8..f576a97ba12 100644 --- a/arch/arm/mach-mx5/board-cpuimx51.c +++ b/arch/arm/mach-mx5/board-cpuimx51.c @@ -60,7 +60,6 @@ #define MX51_USB_PLL_DIV_19_2_MHZ 0x01 #define MX51_USB_PLL_DIV_24_MHZ 0x02 -#if defined(CONFIG_SERIAL_8250) || defined(CONFIG_SERIAL_8250_MODULE) static struct plat_serial8250_port serial_platform_data[] = { { .mapbase = (unsigned long)(MX51_CS1_BASE_ADDR + 0x400000), @@ -105,12 +104,9 @@ static struct platform_device serial_device = { .platform_data = serial_platform_data, }, }; -#endif static struct platform_device *devices[] __initdata = { -#if defined(CONFIG_SERIAL_8250) || defined(CONFIG_SERIAL_8250_MODULE) &serial_device, -#endif }; static iomux_v3_cfg_t eukrea_cpuimx51_pads[] = { diff --git a/arch/arm/mach-mx5/board-mx51_3ds.c b/arch/arm/mach-mx5/board-mx51_3ds.c index 8a0619b5af9..55d5746753a 100644 --- a/arch/arm/mach-mx5/board-mx51_3ds.c +++ b/arch/arm/mach-mx5/board-mx51_3ds.c @@ -71,24 +71,10 @@ static iomux_v3_cfg_t mx51_3ds_pads[] = { }; /* Serial ports */ -#if defined(CONFIG_SERIAL_IMX) || defined(CONFIG_SERIAL_IMX_MODULE) static const struct imxuart_platform_data uart_pdata __initconst = { .flags = IMXUART_HAVE_RTSCTS, }; -static inline void mxc_init_imx_uart(void) -{ - imx51_add_imx_uart(0, &uart_pdata); - imx51_add_imx_uart(1, &uart_pdata); - imx51_add_imx_uart(2, &uart_pdata); -} -#else /* !SERIAL_IMX */ -static inline void mxc_init_imx_uart(void) -{ -} -#endif /* SERIAL_IMX */ - -#if defined(CONFIG_KEYBOARD_IMX) || defined(CONFIG_KEYBOARD_IMX_MODULE) static int mx51_3ds_board_keymap[] = { KEY(0, 0, KEY_1), KEY(0, 1, KEY_2), @@ -124,16 +110,6 @@ static const struct matrix_keymap_data mx51_3ds_map_data __initconst = { .keymap_size = ARRAY_SIZE(mx51_3ds_board_keymap), }; -static void mxc_init_keypad(void) -{ - imx51_add_imx_keypad(&mx51_3ds_map_data); -} -#else -static inline void mxc_init_keypad(void) -{ -} -#endif - static int mx51_3ds_spi2_cs[] = { MXC_SPI_CS(0), MX51_3DS_ECSPI2_CS, @@ -161,7 +137,10 @@ static void __init mxc_board_init(void) { mxc_iomux_v3_setup_multiple_pads(mx51_3ds_pads, ARRAY_SIZE(mx51_3ds_pads)); - mxc_init_imx_uart(); + + imx51_add_imx_uart(0, &uart_pdata); + imx51_add_imx_uart(1, &uart_pdata); + imx51_add_imx_uart(2, &uart_pdata); imx51_add_ecspi(1, &mx51_3ds_ecspi2_pdata); spi_register_board_info(mx51_3ds_spi_nor_device, @@ -172,7 +151,7 @@ static void __init mxc_board_init(void) "devices on the board are unusable.\n"); imx51_add_sdhci_esdhc_imx(0, NULL); - mxc_init_keypad(); + imx51_add_imx_keypad(&mx51_3ds_map_data); imx51_add_imx2_wdt(0, NULL); } diff --git a/arch/arm/mach-mx5/board-mx51_babbage.c b/arch/arm/mach-mx5/board-mx51_babbage.c index 1d231e84107..d9d402eb947 100644 --- a/arch/arm/mach-mx5/board-mx51_babbage.c +++ b/arch/arm/mach-mx5/board-mx51_babbage.c @@ -161,23 +161,10 @@ static iomux_v3_cfg_t mx51babbage_pads[] = { }; /* Serial ports */ -#if defined(CONFIG_SERIAL_IMX) || defined(CONFIG_SERIAL_IMX_MODULE) static const struct imxuart_platform_data uart_pdata __initconst = { .flags = IMXUART_HAVE_RTSCTS, }; -static inline void mxc_init_imx_uart(void) -{ - imx51_add_imx_uart(0, &uart_pdata); - imx51_add_imx_uart(1, &uart_pdata); - imx51_add_imx_uart(2, &uart_pdata); -} -#else /* !SERIAL_IMX */ -static inline void mxc_init_imx_uart(void) -{ -} -#endif /* SERIAL_IMX */ - static const struct imxi2c_platform_data babbage_i2c_data __initconst = { .bitrate = 100000, }; @@ -360,7 +347,11 @@ static void __init mxc_board_init(void) #endif mxc_iomux_v3_setup_multiple_pads(mx51babbage_pads, ARRAY_SIZE(mx51babbage_pads)); - mxc_init_imx_uart(); + + imx51_add_imx_uart(0, &uart_pdata); + imx51_add_imx_uart(1, &uart_pdata); + imx51_add_imx_uart(2, &uart_pdata); + babbage_fec_reset(); imx51_add_fec(NULL); diff --git a/arch/arm/mach-mx5/board-mx51_efikamx.c b/arch/arm/mach-mx5/board-mx51_efikamx.c index b7946f8e8d4..e23704044eb 100644 --- a/arch/arm/mach-mx5/board-mx51_efikamx.c +++ b/arch/arm/mach-mx5/board-mx51_efikamx.c @@ -121,23 +121,10 @@ static iomux_v3_cfg_t mx51efikamx_pads[] = { }; /* Serial ports */ -#if defined(CONFIG_SERIAL_IMX) || defined(CONFIG_SERIAL_IMX_MODULE) static const struct imxuart_platform_data uart_pdata = { .flags = IMXUART_HAVE_RTSCTS, }; -static inline void mxc_init_imx_uart(void) -{ - imx51_add_imx_uart(0, &uart_pdata); - imx51_add_imx_uart(1, &uart_pdata); - imx51_add_imx_uart(2, &uart_pdata); -} -#else /* !SERIAL_IMX */ -static inline void mxc_init_imx_uart(void) -{ -} -#endif /* SERIAL_IMX */ - /* This function is board specific as the bit mask for the plldiv will also * be different for other Freescale SoCs, thus a common bitmask is not * possible and cannot get place in /plat-mxc/ehci.c. @@ -320,7 +307,9 @@ static void __init mxc_board_init(void) ARRAY_SIZE(mx51efikamx_pads)); mx51_efikamx_board_id(); mxc_register_device(&mxc_usbdr_host_device, &dr_utmi_config); - mxc_init_imx_uart(); + imx51_add_imx_uart(0, &uart_pdata); + imx51_add_imx_uart(1, &uart_pdata); + imx51_add_imx_uart(2, &uart_pdata); imx51_add_sdhci_esdhc_imx(0, NULL); /* on < 1.2 boards both SD controllers are used */ |