diff options
| -rw-r--r-- | drivers/watchdog/f71808e_wdt.c | 45 |
1 files changed, 41 insertions, 4 deletions
diff --git a/drivers/watchdog/f71808e_wdt.c b/drivers/watchdog/f71808e_wdt.c index 3c9142474d1..f573948998b 100644 --- a/drivers/watchdog/f71808e_wdt.c +++ b/drivers/watchdog/f71808e_wdt.c @@ -42,6 +42,7 @@ #define SIO_REG_DEVID 0x20 /* Device ID (2 bytes) */ #define SIO_REG_DEVREV 0x22 /* Device revision */ #define SIO_REG_MANID 0x23 /* Fintek ID (2 bytes) */ +#define SIO_REG_ROM_ADDR_SEL 0x27 /* ROM address select */ #define SIO_REG_MFUNCT1 0x29 /* Multi function select 1 */ #define SIO_REG_MFUNCT2 0x2a /* Multi function select 2 */ #define SIO_REG_MFUNCT3 0x2b /* Multi function select 3 */ @@ -71,6 +72,8 @@ #define WATCHDOG_MAX_TIMEOUT (60 * 255) #define WATCHDOG_PULSE_WIDTH 125 /* 125 ms, default pulse width for watchdog signal */ +#define WATCHDOG_F71862FG_PIN 63 /* default watchdog reset output + pin number 63 */ static unsigned short force_id; module_param(force_id, ushort, 0); @@ -90,6 +93,12 @@ MODULE_PARM_DESC(pulse_width, "Watchdog signal pulse width. 0(=level), 1 ms, 25 ms, 125 ms or 5000 ms" " (default=" __MODULE_STRING(WATCHDOG_PULSE_WIDTH) ")"); +static unsigned int f71862fg_pin = WATCHDOG_F71862FG_PIN; +module_param(f71862fg_pin, uint, 0); +MODULE_PARM_DESC(f71862fg_pin, + "Watchdog f71862fg reset output pin configuration. Choose pin 56 or 63" + " (default=" __MODULE_STRING(WATCHDOG_F71862FG_PIN)")"); + static int nowayout = WATCHDOG_NOWAYOUT; module_param(nowayout, bool, 0444); MODULE_PARM_DESC(nowayout, "Disable watchdog shutdown on close"); @@ -283,6 +292,28 @@ exit_unlock: return err; } +static int f71862fg_pin_configure(unsigned short ioaddr) +{ + /* When ioaddr is non-zero the calling function has to take care of + mutex handling and superio preparation! */ + + if (f71862fg_pin == 63) { + if (ioaddr) { + /* SPI must be disabled first to use this pin! */ + superio_clear_bit(ioaddr, SIO_REG_ROM_ADDR_SEL, 6); + superio_set_bit(ioaddr, SIO_REG_MFUNCT3, 4); + } + } else if (f71862fg_pin == 56) { + if (ioaddr) + superio_set_bit(ioaddr, SIO_REG_MFUNCT1, 1); + } else { + printk(KERN_ERR DRVNAME ": Invalid argument f71862fg_pin=%d\n", + f71862fg_pin); + return -EINVAL; + } + return 0; +} + static int watchdog_start(void) { /* Make sure we don't die as soon as the watchdog is enabled below */ @@ -304,6 +335,12 @@ static int watchdog_start(void) superio_clear_bit(watchdog.sioaddr, SIO_REG_MFUNCT3, 3); break; + case f71862fg: + err = f71862fg_pin_configure(watchdog.sioaddr); + if (err) + goto exit_superio; + break; + case f71882fg: /* Set pin 56 to WDTRST# */ superio_set_bit(watchdog.sioaddr, SIO_REG_MFUNCT1, 1); @@ -712,16 +749,16 @@ static int __init f71808e_find(int sioaddr) case SIO_F71808_ID: watchdog.type = f71808fg; break; + case SIO_F71862_ID: + watchdog.type = f71862fg; + err = f71862fg_pin_configure(0); /* validate module parameter */ + break; case SIO_F71882_ID: watchdog.type = f71882fg; break; case SIO_F71889_ID: watchdog.type = f71889fg; break; - case SIO_F71862_ID: - /* These have a watchdog, though it isn't implemented (yet). */ - err = -ENOSYS; - goto exit; case SIO_F71858_ID: /* Confirmed (by datasheet) not to have a watchdog. */ err = -ENODEV; |