diff options
| -rw-r--r-- | MAINTAINERS | 6 | ||||
| -rw-r--r-- | drivers/hwmon/Kconfig | 11 | ||||
| -rw-r--r-- | drivers/hwmon/Makefile | 1 | ||||
| -rw-r--r-- | drivers/hwmon/adm1029.c | 508 |
4 files changed, 526 insertions, 0 deletions
diff --git a/MAINTAINERS b/MAINTAINERS index 93a338daedd..0556a8de857 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -268,6 +268,12 @@ M: khali@linux-fr.org L: lm-sensors@lm-sensors.org S: Maintained +ADM1029 HARDWARE MONITOR DRIVER +P: Corentin Labbe +M: corentin.labbe@geomatys.fr +L: lm-sensors@lm-sensors.org +S: Maintained + ADT746X FAN DRIVER P: Colin Leroy M: colin@colino.net diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig index 891ef6d0b1b..c3d4856fb61 100644 --- a/drivers/hwmon/Kconfig +++ b/drivers/hwmon/Kconfig @@ -73,6 +73,17 @@ config SENSORS_ADM1026 This driver can also be built as a module. If so, the module will be called adm1026. +config SENSORS_ADM1029 + tristate "Analog Devices ADM1029" + depends on HWMON && I2C && EXPERIMENTAL + help + If you say yes here you get support for Analog Devices ADM1029 + sensor chip. + Very rare chip, please let us know you use it. + + This driver can also be built as a module. If so, the module + will be called adm1029. + config SENSORS_ADM1031 tristate "Analog Devices ADM1031 and compatibles" depends on HWMON && I2C && EXPERIMENTAL diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile index 31661124271..4165c27a2f2 100644 --- a/drivers/hwmon/Makefile +++ b/drivers/hwmon/Makefile @@ -17,6 +17,7 @@ obj-$(CONFIG_SENSORS_ABITUGURU) += abituguru.o obj-$(CONFIG_SENSORS_ADM1021) += adm1021.o obj-$(CONFIG_SENSORS_ADM1025) += adm1025.o obj-$(CONFIG_SENSORS_ADM1026) += adm1026.o +obj-$(CONFIG_SENSORS_ADM1029) += adm1029.o obj-$(CONFIG_SENSORS_ADM1031) += adm1031.o obj-$(CONFIG_SENSORS_ADM9240) += adm9240.o obj-$(CONFIG_SENSORS_AMS) += ams/ diff --git a/drivers/hwmon/adm1029.c b/drivers/hwmon/adm1029.c new file mode 100644 index 00000000000..73ce31b3151 --- /dev/null +++ b/drivers/hwmon/adm1029.c @@ -0,0 +1,508 @@ +/* + * adm1029.c - Part of lm_sensors, Linux kernel modules for hardware monitoring + * + * Copyright (C) 2006 Corentin LABBE <corentin.labbe@geomatys.fr> + * + * Based on LM83 Driver by Jean Delvare <khali@linux-fr.org> + * + * Give only processor, motherboard temperatures and fan tachs + * Very rare chip please let me know if you use it + * + * http://www.analog.com/UploadedFiles/Data_Sheets/ADM1029.pdf + * + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation version 2 of the License + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/slab.h> +#include <linux/jiffies.h> +#include <linux/i2c.h> +#include <linux/hwmon-sysfs.h> +#include <linux/hwmon.h> +#include <linux/err.h> +#include <linux/mutex.h> + +/* + * Addresses to scan + */ + +static unsigned short normal_i2c[] = { + 0x28, 0x29, 0x2a, + 0x2b, 0x2c, 0x2d, + 0x2e, 0x2f, I2C_CLIENT_END +}; + +/* + * Insmod parameters + */ + +I2C_CLIENT_INSMOD_1(adm1029); + +/* + * The ADM1029 registers + * Manufacturer ID is 0x41 for Analog Devices + */ + +#define ADM1029_REG_MAN_ID 0x0D +#define ADM1029_REG_CHIP_ID 0x0E +#define ADM1029_REG_CONFIG 0x01 +#define ADM1029_REG_NB_FAN_SUPPORT 0x02 + +#define ADM1029_REG_TEMP_DEVICES_INSTALLED 0x06 + +#define ADM1029_REG_LOCAL_TEMP 0xA0 +#define ADM1029_REG_REMOTE1_TEMP 0xA1 +#define ADM1029_REG_REMOTE2_TEMP 0xA2 + +#define ADM1029_REG_LOCAL_TEMP_HIGH 0x90 +#define ADM1029_REG_REMOTE1_TEMP_HIGH 0x91 +#define ADM1029_REG_REMOTE2_TEMP_HIGH 0x92 + +#define ADM1029_REG_LOCAL_TEMP_LOW 0x98 +#define ADM1029_REG_REMOTE1_TEMP_LOW 0x99 +#define ADM1029_REG_REMOTE2_TEMP_LOW 0x9A + +#define ADM1029_REG_FAN1 0x70 +#define ADM1029_REG_FAN2 0x71 + +#define ADM1029_REG_FAN1_MIN 0x78 +#define ADM1029_REG_FAN2_MIN 0x79 + +#define ADM1029_REG_FAN1_CONFIG 0x68 +#define ADM1029_REG_FAN2_CONFIG 0x69 + +#define TEMP_FROM_REG(val) ((val) * 1000) + +#define DIV_FROM_REG(val) ( 1 << (((val) >> 6) - 1)) + +/* Registers to be checked by adm1029_update_device() */ +static const u8 ADM1029_REG_TEMP[] = { + ADM1029_REG_LOCAL_TEMP, + ADM1029_REG_REMOTE1_TEMP, + ADM1029_REG_REMOTE2_TEMP, + ADM1029_REG_LOCAL_TEMP_HIGH, + ADM1029_REG_REMOTE1_TEMP_HIGH, + ADM1029_REG_REMOTE2_TEMP_HIGH, + ADM1029_REG_LOCAL_TEMP_LOW, + ADM1029_REG_REMOTE1_TEMP_LOW, + ADM1029_REG_REMOTE2_TEMP_LOW, +}; + +static const u8 ADM1029_REG_FAN[] = { + ADM1029_REG_FAN1, + ADM1029_REG_FAN2, + ADM1029_REG_FAN1_MIN, + ADM1029_REG_FAN2_MIN, +}; + +static const u8 ADM1029_REG_FAN_DIV[] = { + ADM1029_REG_FAN1_CONFIG, + ADM1029_REG_FAN2_CONFIG, +}; + +/* + * Functions declaration + */ + +static int adm1029_attach_adapter(struct i2c_adapter *adapter); +static int adm1029_detect(struct i2c_adapter *adapter, int address, int kind); +static int adm1029_detach_client(struct i2c_client *client); +static struct adm1029_data *adm1029_update_device(struct device *dev); +static int adm1029_init_client(struct i2c_client *client); + +/* + * Driver data (common to all clients) + */ + +static struct i2c_driver adm1029_driver = { + .driver = { + .name = "adm1029", + }, + .attach_adapter = adm1029_attach_adapter, + .detach_client = adm1029_detach_client, +}; + +/* + * Client data (each client gets its own) + */ + +struct adm1029_data { + struct i2c_client client; + struct class_device *class_dev; + struct mutex update_lock; + char valid; /* zero until following fields are valid */ + unsigned long last_updated; /* in jiffies */ + + /* registers values, signed for temperature, unsigned for other stuff */ + s8 temp[ARRAY_SIZE(ADM1029_REG_TEMP)]; + u8 fan[ARRAY_SIZE(ADM1029_REG_FAN)]; + u8 fan_div[ARRAY_SIZE(ADM1029_REG_FAN_DIV)]; +}; + +/* + * Sysfs stuff + */ + +static ssize_t +show_temp(struct device *dev, struct device_attribute *devattr, char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct adm1029_data *data = adm1029_update_device(dev); + return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp[attr->index])); +} + +static ssize_t +show_fan(struct device *dev, struct device_attribute *devattr, char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct adm1029_data *data = adm1029_update_device(dev); + u16 val; + if (data->fan[attr->index] == 0 || data->fan_div[attr->index] == 0 + || data->fan[attr->index] == 255) { + return sprintf(buf, "0\n"); + } + + val = 1880 * 120 / DIV_FROM_REG(data->fan_div[attr->index]) + / data->fan[attr->index]; + return sprintf(buf, "%d\n", val); +} + +static ssize_t +show_fan_div(struct device *dev, struct device_attribute *devattr, char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct adm1029_data *data = adm1029_update_device(dev); + if (data->fan_div[attr->index] == 0) + return sprintf(buf, "0\n"); + return sprintf(buf, "%d\n", DIV_FROM_REG(data->fan_div[attr->index])); +} + +static ssize_t set_fan_div(struct device *dev, + struct device_attribute *devattr, const char *buf, size_t count) +{ + struct i2c_client *client = to_i2c_client(dev); + struct adm1029_data *data = i2c_get_clientdata(client); + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + long val = simple_strtol(buf, NULL, 10); + u8 reg; + + mutex_lock(&data->update_lock); + + /*Read actual config */ + reg = i2c_smbus_read_byte_data(client, + ADM1029_REG_FAN_DIV[attr->index]); + + switch (val) { + case 1: + val = 1; + break; + case 2: + val = 2; + break; + case 4: + val = 3; + break; + default: + mutex_unlock(&data->update_lock); + dev_err(&client->dev, "fan_div value %ld not " + "supported. Choose one of 1, 2 or 4!\n", val); + return -EINVAL; + } + /* Update the value */ + reg = (reg & 0x3F) | (val << 6); + + /* Write value */ + i2c_smbus_write_byte_data(client, + ADM1029_REG_FAN_DIV[attr->index], reg); + mutex_unlock(&data->update_lock); + + return count; +} + +/* +Access rights on sysfs, S_IRUGO stand for Is Readable by User, Group and Others + S_IWUSR stand for Is Writable by User +*/ +static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, show_temp, NULL, 0); +static SENSOR_DEVICE_ATTR(temp2_input, S_IRUGO, show_temp, NULL, 1); +static SENSOR_DEVICE_ATTR(temp3_input, S_IRUGO, show_temp, NULL, 2); + +static SENSOR_DEVICE_ATTR(temp1_max, S_IRUGO, show_temp, NULL, 3); +static SENSOR_DEVICE_ATTR(temp2_max, S_IRUGO, show_temp, NULL, 4); +static SENSOR_DEVICE_ATTR(temp3_max, S_IRUGO, show_temp, NULL, 5); + +static SENSOR_DEVICE_ATTR(temp1_min, S_IRUGO, show_temp, NULL, 6); +static SENSOR_DEVICE_ATTR(temp2_min, S_IRUGO, show_temp, NULL, 7); +static SENSOR_DEVICE_ATTR(temp3_min, S_IRUGO, show_temp, NULL, 8); + +static SENSOR_DEVICE_ATTR(fan1_input, S_IRUGO, show_fan, NULL, 0); +static SENSOR_DEVICE_ATTR(fan2_input, S_IRUGO, show_fan, NULL, 1); + +static SENSOR_DEVICE_ATTR(fan1_min, S_IRUGO, show_fan, NULL, 2); +static SENSOR_DEVICE_ATTR(fan2_min, S_IRUGO, show_fan, NULL, 3); + +static SENSOR_DEVICE_ATTR(fan1_div, S_IRUGO | S_IWUSR, + show_fan_div, set_fan_div, 0); +static SENSOR_DEVICE_ATTR(fan2_div, S_IRUGO | S_IWUSR, + show_fan_div, set_fan_div, 1); + +static struct attribute *adm1029_attributes[] = { + &sensor_dev_attr_temp1_input.dev_attr.attr, + &sensor_dev_attr_temp1_min.dev_attr.attr, + &sensor_dev_attr_temp1_max.dev_attr.attr, + &sensor_dev_attr_temp2_input.dev_attr.attr, + &sensor_dev_attr_temp2_min.dev_attr.attr, + &sensor_dev_attr_temp2_max.dev_attr.attr, + &sensor_dev_attr_temp3_input.dev_attr.attr, + &sensor_dev_attr_temp3_min.dev_attr.attr, + &sensor_dev_attr_temp3_max.dev_attr.attr, + &sensor_dev_attr_fan1_input.dev_attr.attr, + &sensor_dev_attr_fan2_input.dev_attr.attr, + &sensor_dev_attr_fan1_min.dev_attr.attr, + &sensor_dev_attr_fan2_min.dev_attr.attr, + &sensor_dev_attr_fan1_div.dev_attr.attr, + &sensor_dev_attr_fan2_div.dev_attr.attr, + NULL +}; + +static const struct attribute_group adm1029_group = { + .attrs = adm1029_attributes, +}; + +/* + * Real code + */ + +static int adm1029_attach_adapter(struct i2c_adapter *adapter) +{ + if (!(adapter->class & I2C_CLASS_HWMON)) + return 0; + return i2c_probe(adapter, &addr_data, adm1029_detect); +} + +/* + * The following function does more than just detection. If detection + * succeeds, it also registers the new chip. + */ + +static int adm1029_detect(struct i2c_adapter *adapter, int address, int kind) +{ + struct i2c_client *client; + struct adm1029_data *data; + int err = 0; + const char *name = ""; + if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) + goto exit; + + if (!(data = kzalloc(sizeof(struct adm1029_data), GFP_KERNEL))) { + err = -ENOMEM; + goto exit; + } + + client = &data->client; + i2c_set_clientdata(client, data); + client->addr = address; + client->adapter = adapter; + client->driver = &adm1029_driver; + + /* Now we do the detection and identification. A negative kind + * means that the driver was loaded with no force parameter + * (default), so we must both detect and identify the chip + * (actually there is only one possible kind of chip for now, adm1029). + * A zero kind means that the driver was loaded with the force + * parameter, the detection step shall be skipped. A positive kind + * means that the driver was loaded with the force parameter and a + * given kind of chip is requested, so both the detection and the + * identification steps are skipped. */ + + /* Default to an adm1029 if forced */ + if (kind == 0) + kind = adm1029; + + /* ADM1029 doesn't have CHIP ID, check just MAN ID + * For better detection we check also ADM1029_TEMP_DEVICES_INSTALLED, + * ADM1029_REG_NB_FAN_SUPPORT and compare it with possible values + * documented + */ + + if (kind <= 0) { /* identification */ + u8 man_id, chip_id, temp_devices_installed, nb_fan_support; + + man_id = i2c_smbus_read_byte_data(client, ADM1029_REG_MAN_ID); + chip_id = i2c_smbus_read_byte_data(client, ADM1029_REG_CHIP_ID); + temp_devices_installed = i2c_smbus_read_byte_data(client, + ADM1029_REG_TEMP_DEVICES_INSTALLED); + nb_fan_support = i2c_smbus_read_byte_data(client, + ADM1029_REG_NB_FAN_SUPPORT); + /* 0x41 is Analog Devices */ + if (man_id == 0x41 && (temp_devices_installed & 0xf9) == 0x01 + && nb_fan_support == 0x03) { + if ((chip_id & 0xF0) == 0x00) { + kind = adm1029; + } else { + /* There are no "official" CHIP ID, so actually + * we use Major/Minor revision for that */ + printk(KERN_INFO + "adm1029: Unknown major revision %x, " + "please let us know\n", chip_id); + } + } + + if (kind <= 0) { /* identification failed */ + pr_debug("adm1029: Unsupported chip (man_id=0x%02X, " + "chip_id=0x%02X)\n", man_id, chip_id); + goto exit_free; + } + } + + if (kind == adm1029) { + name = "adm1029"; + } + + /* We can fill in the remaining client fields */ + strlcpy(client->name, name, I2C_NAME_SIZE); + mutex_init(&data->update_lock); + + /* Tell the I2C layer a new client has arrived */ + if ((err = i2c_attach_client(client))) + goto exit_free; + + /* + * Initialize the ADM1029 chip + * Check config register + */ + if (adm1029_init_client(client) == 0) + goto exit_detach; + + /* Register sysfs hooks */ + if ((err = sysfs_create_group(&client->dev.kobj, &adm1029_group))) + goto exit_detach; + + data->class_dev = hwmon_device_register(&client->dev); + if (IS_ERR(data->class_dev)) { + err = PTR_ERR(data->class_dev); + goto exit_remove_files; + } + + return 0; + + exit_remove_files: + sysfs_remove_group(&client->dev.kobj, &adm1029_group); + exit_detach: + i2c_detach_client(client); + exit_free: + kfree(data); + exit: + return err; +} + +static int adm1029_init_client(struct i2c_client *client) +{ + u8 config; + config = i2c_smbus_read_byte_data(client, ADM1029_REG_CONFIG); + if ((config & 0x10) == 0) { + i2c_smbus_write_byte_data(client, ADM1029_REG_CONFIG, + config | 0x10); + } + /* recheck config */ + config = i2c_smbus_read_byte_data(client, ADM1029_REG_CONFIG); + if ((config & 0x10) == 0) { + dev_err(&client->dev, "Initialization failed!\n"); + return 0; + } + return 1; +} + +static int adm1029_detach_client(struct i2c_client *client) +{ + struct adm1029_data *data = i2c_get_clientdata(client); + int err; + + hwmon_device_unregister(data->class_dev); + sysfs_remove_group(&client->dev.kobj, &adm1029_group); + + if ((err = i2c_detach_client(client))) + return err; + + kfree(data); + return 0; +} + +/* +function that update the status of the chips (temperature for exemple) +*/ +static struct adm1029_data *adm1029_update_device(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + struct adm1029_data *data = i2c_get_clientdata(client); + + mutex_lock(&data->update_lock); + /* + * Use the "cache" Luke, don't recheck values + * if there are already checked not a long time later + */ + if (time_after(jiffies, data->last_updated + HZ * 2) + || !data->valid) { + int nr; + + dev_dbg(&client->dev, "Updating adm1029 data\n"); + + for (nr = 0; nr < ARRAY_SIZE(ADM1029_REG_TEMP); nr++) { + data->temp[nr] = + i2c_smbus_read_byte_data(client, + ADM1029_REG_TEMP[nr]); + } + for (nr = 0; nr < ARRAY_SIZE(ADM1029_REG_FAN); nr++) { + data->fan[nr] = + i2c_smbus_read_byte_data(client, + ADM1029_REG_FAN[nr]); + } + for (nr = 0; nr < ARRAY_SIZE(ADM1029_REG_FAN_DIV); nr++) { + data->fan_div[nr] = + i2c_smbus_read_byte_data(client, + ADM1029_REG_FAN_DIV[nr]); + } + + data->last_updated = jiffies; + data->valid = 1; + } + + mutex_unlock(&data->update_lock); + + return data; +} + +/* + Common module stuff +*/ +static int __init sensors_adm1029_init(void) +{ + + return i2c_add_driver(&adm1029_driver); +} + +static void __exit sensors_adm1029_exit(void) +{ + + i2c_del_driver(&adm1029_driver); +} + +MODULE_AUTHOR("Corentin LABBE <corentin.labbe@geomatys.fr>"); +MODULE_DESCRIPTION("adm1029 driver"); +MODULE_LICENSE("GPL v2"); + +module_init(sensors_adm1029_init); +module_exit(sensors_adm1029_exit); |