diff options
| -rw-r--r-- | drivers/ata/Kconfig | 1 | ||||
| -rw-r--r-- | drivers/ata/Makefile | 1 | ||||
| -rw-r--r-- | drivers/ata/pata_legacy.c | 9 | ||||
| -rw-r--r-- | drivers/ata/pata_qdi.c | 366 |
4 files changed, 9 insertions, 368 deletions
diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig index c6ef9d0cf37..6bdedd7cca2 100644 --- a/drivers/ata/Kconfig +++ b/drivers/ata/Kconfig @@ -831,6 +831,7 @@ config PATA_OF_PLATFORM config PATA_QDI tristate "QDI VLB PATA support" depends on ISA + select PATA_LEGACY help Support for QDI 6500 and 6580 PATA controllers on VESA local bus. diff --git a/drivers/ata/Makefile b/drivers/ata/Makefile index 9550d691fd1..6ece5b7231a 100644 --- a/drivers/ata/Makefile +++ b/drivers/ata/Makefile @@ -88,7 +88,6 @@ obj-$(CONFIG_PATA_PCMCIA) += pata_pcmcia.o obj-$(CONFIG_PATA_PALMLD) += pata_palmld.o obj-$(CONFIG_PATA_PLATFORM) += pata_platform.o obj-$(CONFIG_PATA_OF_PLATFORM) += pata_of_platform.o -obj-$(CONFIG_PATA_QDI) += pata_qdi.o obj-$(CONFIG_PATA_RB532) += pata_rb532_cf.o obj-$(CONFIG_PATA_RZ1000) += pata_rz1000.o obj-$(CONFIG_PATA_SAMSUNG_CF) += pata_samsung_cf.o diff --git a/drivers/ata/pata_legacy.c b/drivers/ata/pata_legacy.c index d960f8e9e8b..e71fdfbf69b 100644 --- a/drivers/ata/pata_legacy.c +++ b/drivers/ata/pata_legacy.c @@ -137,11 +137,17 @@ static int ht6560a; /* HT 6560A on primary 1, second 2, both 3 */ static int ht6560b; /* HT 6560A on primary 1, second 2, both 3 */ static int opti82c611a; /* Opti82c611A on primary 1, sec 2, both 3 */ static int opti82c46x; /* Opti 82c465MV present(pri/sec autodetect) */ -static int qdi; /* Set to probe QDI controllers */ static int autospeed; /* Chip present which snoops speed changes */ static int pio_mask = ATA_PIO4; /* PIO range for autospeed devices */ static int iordy_mask = 0xFFFFFFFF; /* Use iordy if available */ +/* Set to probe QDI controllers */ +#ifdef CONFIG_PATA_QDI_MODULE +static int qdi = 1; +#else +static int qdi; +#endif + #ifdef CONFIG_PATA_WINBOND_VLB_MODULE static int winbond = 1; /* Set to probe Winbond controllers, give I/O port if non standard */ @@ -1306,6 +1312,7 @@ MODULE_AUTHOR("Alan Cox"); MODULE_DESCRIPTION("low-level driver for legacy ATA"); MODULE_LICENSE("GPL"); MODULE_VERSION(DRV_VERSION); +MODULE_ALIAS("pata_qdi"); MODULE_ALIAS("pata_winbond"); module_param(probe_all, int, 0); diff --git a/drivers/ata/pata_qdi.c b/drivers/ata/pata_qdi.c deleted file mode 100644 index 45879dc6fa4..00000000000 --- a/drivers/ata/pata_qdi.c +++ /dev/null @@ -1,366 +0,0 @@ -/* - * pata_qdi.c - QDI VLB ATA controllers - * (C) 2006 Red Hat - * - * This driver mostly exists as a proof of concept for non PCI devices under - * libata. While the QDI6580 was 'neat' in 1993 it is no longer terribly - * useful. - * - * Tuning code written from the documentation at - * http://www.ryston.cz/petr/vlb/qd6500.html - * http://www.ryston.cz/petr/vlb/qd6580.html - * - * Probe code based on drivers/ide/legacy/qd65xx.c - * Rewritten from the work of Colten Edwards <pje120@cs.usask.ca> by - * Samuel Thibault <samuel.thibault@ens-lyon.org> - */ - -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/pci.h> -#include <linux/init.h> -#include <linux/blkdev.h> -#include <linux/delay.h> -#include <scsi/scsi_host.h> -#include <linux/libata.h> -#include <linux/platform_device.h> - -#define DRV_NAME "pata_qdi" -#define DRV_VERSION "0.3.1" - -#define NR_HOST 4 /* Two 6580s */ - -struct qdi_data { - unsigned long timing; - u8 clock[2]; - u8 last; - int fast; - struct platform_device *platform_dev; - -}; - -static struct ata_host *qdi_host[NR_HOST]; -static struct qdi_data qdi_data[NR_HOST]; -static int nr_qdi_host; - -#ifdef MODULE -static int probe_qdi = 1; -#else -static int probe_qdi; -#endif - -static void qdi6500_set_piomode(struct ata_port *ap, struct ata_device *adev) -{ - struct ata_timing t; - struct qdi_data *qdi = ap->host->private_data; - int active, recovery; - u8 timing; - - /* Get the timing data in cycles */ - ata_timing_compute(adev, adev->pio_mode, &t, 30303, 1000); - - if (qdi->fast) { - active = 8 - clamp_val(t.active, 1, 8); - recovery = 18 - clamp_val(t.recover, 3, 18); - } else { - active = 9 - clamp_val(t.active, 2, 9); - recovery = 15 - clamp_val(t.recover, 0, 15); - } - timing = (recovery << 4) | active | 0x08; - - qdi->clock[adev->devno] = timing; - - outb(timing, qdi->timing); -} - -static void qdi6580_set_piomode(struct ata_port *ap, struct ata_device *adev) -{ - struct ata_timing t; - struct qdi_data *qdi = ap->host->private_data; - int active, recovery; - u8 timing; - - /* Get the timing data in cycles */ - ata_timing_compute(adev, adev->pio_mode, &t, 30303, 1000); - - if (qdi->fast) { - active = 8 - clamp_val(t.active, 1, 8); - recovery = 18 - clamp_val(t.recover, 3, 18); - } else { - active = 9 - clamp_val(t.active, 2, 9); - recovery = 15 - clamp_val(t.recover, 0, 15); - } - timing = (recovery << 4) | active | 0x08; - - qdi->clock[adev->devno] = timing; - - outb(timing, qdi->timing); - - /* Clear the FIFO */ - if (adev->class != ATA_DEV_ATA) - outb(0x5F, (qdi->timing & 0xFFF0) + 3); -} - -/** - * qdi_qc_issue - command issue - * @qc: command pending - * - * Called when the libata layer is about to issue a command. We wrap - * this interface so that we can load the correct ATA timings. - */ - -static unsigned int qdi_qc_issue(struct ata_queued_cmd *qc) -{ - struct ata_port *ap = qc->ap; - struct ata_device *adev = qc->dev; - struct qdi_data *qdi = ap->host->private_data; - - if (qdi->clock[adev->devno] != qdi->last) { - if (adev->pio_mode) { - qdi->last = qdi->clock[adev->devno]; - outb(qdi->clock[adev->devno], qdi->timing); - } - } - return ata_sff_qc_issue(qc); -} - -static unsigned int qdi_data_xfer(struct ata_device *dev, unsigned char *buf, - unsigned int buflen, int rw) -{ - if (ata_id_has_dword_io(dev->id)) { - struct ata_port *ap = dev->link->ap; - int slop = buflen & 3; - - if (rw == READ) - ioread32_rep(ap->ioaddr.data_addr, buf, buflen >> 2); - else - iowrite32_rep(ap->ioaddr.data_addr, buf, buflen >> 2); - - if (unlikely(slop)) { - __le32 pad; - if (rw == READ) { - pad = cpu_to_le32(ioread32(ap->ioaddr.data_addr)); - memcpy(buf + buflen - slop, &pad, slop); - } else { - memcpy(&pad, buf + buflen - slop, slop); - iowrite32(le32_to_cpu(pad), ap->ioaddr.data_addr); - } - buflen += 4 - slop; - } - } else - buflen = ata_sff_data_xfer(dev, buf, buflen, rw); - - return buflen; -} - -static struct scsi_host_template qdi_sht = { - ATA_PIO_SHT(DRV_NAME), -}; - -static struct ata_port_operations qdi6500_port_ops = { - .inherits = &ata_sff_port_ops, - .qc_issue = qdi_qc_issue, - .sff_data_xfer = qdi_data_xfer, - .cable_detect = ata_cable_40wire, - .set_piomode = qdi6500_set_piomode, -}; - -static struct ata_port_operations qdi6580_port_ops = { - .inherits = &qdi6500_port_ops, - .set_piomode = qdi6580_set_piomode, -}; - -/** - * qdi_init_one - attach a qdi interface - * @type: Type to display - * @io: I/O port start - * @irq: interrupt line - * @fast: True if on a > 33Mhz VLB - * - * Register an ISA bus IDE interface. Such interfaces are PIO and we - * assume do not support IRQ sharing. - */ - -static __init int qdi_init_one(unsigned long port, int type, unsigned long io, int irq, int fast) -{ - unsigned long ctl = io + 0x206; - struct platform_device *pdev; - struct ata_host *host; - struct ata_port *ap; - void __iomem *io_addr, *ctl_addr; - int ret; - - /* - * Fill in a probe structure first of all - */ - - pdev = platform_device_register_simple(DRV_NAME, nr_qdi_host, NULL, 0); - if (IS_ERR(pdev)) - return PTR_ERR(pdev); - - ret = -ENOMEM; - io_addr = devm_ioport_map(&pdev->dev, io, 8); - ctl_addr = devm_ioport_map(&pdev->dev, ctl, 1); - if (!io_addr || !ctl_addr) - goto fail; - - ret = -ENOMEM; - host = ata_host_alloc(&pdev->dev, 1); - if (!host) - goto fail; - ap = host->ports[0]; - - if (type == 6580) { - ap->ops = &qdi6580_port_ops; - ap->pio_mask = ATA_PIO4; - ap->flags |= ATA_FLAG_SLAVE_POSS; - } else { - ap->ops = &qdi6500_port_ops; - ap->pio_mask = ATA_PIO2; /* Actually PIO3 !IORDY is possible */ - ap->flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_NO_IORDY; - } - - ap->ioaddr.cmd_addr = io_addr; - ap->ioaddr.altstatus_addr = ctl_addr; - ap->ioaddr.ctl_addr = ctl_addr; - ata_sff_std_ports(&ap->ioaddr); - - ata_port_desc(ap, "cmd %lx ctl %lx", io, ctl); - - /* - * Hook in a private data structure per channel - */ - ap->private_data = &qdi_data[nr_qdi_host]; - - qdi_data[nr_qdi_host].timing = port; - qdi_data[nr_qdi_host].fast = fast; - qdi_data[nr_qdi_host].platform_dev = pdev; - - printk(KERN_INFO DRV_NAME": qd%d at 0x%lx.\n", type, io); - - /* activate */ - ret = ata_host_activate(host, irq, ata_sff_interrupt, 0, &qdi_sht); - if (ret) - goto fail; - - qdi_host[nr_qdi_host++] = dev_get_drvdata(&pdev->dev); - return 0; - - fail: - platform_device_unregister(pdev); - return ret; -} - -/** - * qdi_init - attach qdi interfaces - * - * Attach qdi IDE interfaces by scanning the ports it may occupy. - */ - -static __init int qdi_init(void) -{ - unsigned long flags; - static const unsigned long qd_port[2] = { 0x30, 0xB0 }; - static const unsigned long ide_port[2] = { 0x170, 0x1F0 }; - static const int ide_irq[2] = { 14, 15 }; - - int ct = 0; - int i; - - if (probe_qdi == 0) - return -ENODEV; - - /* - * Check each possible QD65xx base address - */ - - for (i = 0; i < 2; i++) { - unsigned long port = qd_port[i]; - u8 r, res; - - - if (request_region(port, 2, "pata_qdi")) { - /* Check for a card */ - local_irq_save(flags); - r = inb_p(port); - outb_p(0x19, port); - res = inb_p(port); - outb_p(r, port); - local_irq_restore(flags); - - /* Fail */ - if (res == 0x19) - { - release_region(port, 2); - continue; - } - - /* Passes the presence test */ - r = inb_p(port + 1); /* Check port agrees with port set */ - if ((r & 2) >> 1 != i) { - release_region(port, 2); - continue; - } - - /* Check card type */ - if ((r & 0xF0) == 0xC0) { - /* QD6500: single channel */ - if (r & 8) { - /* Disabled ? */ - release_region(port, 2); - continue; - } - if (qdi_init_one(port, 6500, ide_port[r & 0x01], ide_irq[r & 0x01], r & 0x04) == 0) - ct++; - } - if (((r & 0xF0) == 0xA0) || (r & 0xF0) == 0x50) { - /* QD6580: dual channel */ - if (!request_region(port + 2 , 2, "pata_qdi")) - { - release_region(port, 2); - continue; - } - res = inb(port + 3); - if (res & 1) { - /* Single channel mode */ - if (qdi_init_one(port, 6580, ide_port[r & 0x01], ide_irq[r & 0x01], r & 0x04) == 0) - ct++; - } else { - /* Dual channel mode */ - if (qdi_init_one(port, 6580, 0x1F0, 14, r & 0x04) == 0) - ct++; - if (qdi_init_one(port + 2, 6580, 0x170, 15, r & 0x04) == 0) - ct++; - } - } - } - } - if (ct != 0) - return 0; - return -ENODEV; -} - -static __exit void qdi_exit(void) -{ - int i; - - for (i = 0; i < nr_qdi_host; i++) { - ata_host_detach(qdi_host[i]); - /* Free the control resource. The 6580 dual channel has the resources - * claimed as a pair of 2 byte resources so we need no special cases... - */ - release_region(qdi_data[i].timing, 2); - platform_device_unregister(qdi_data[i].platform_dev); - } -} - -MODULE_AUTHOR("Alan Cox"); -MODULE_DESCRIPTION("low-level driver for qdi ATA"); -MODULE_LICENSE("GPL"); -MODULE_VERSION(DRV_VERSION); - -module_init(qdi_init); -module_exit(qdi_exit); - -module_param(probe_qdi, int, 0); - |