diff options
50 files changed, 1813 insertions, 664 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index a07b6c47a6b..2d70cece2ea 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -760,7 +760,6 @@ config ARCH_NOMADIK config ARCH_DAVINCI bool "TI DaVinci" - select CPU_ARM926T select GENERIC_CLOCKEVENTS select ARCH_REQUIRE_GPIOLIB select ZONE_DMA diff --git a/arch/arm/mach-davinci/Kconfig b/arch/arm/mach-davinci/Kconfig index 0ebe185610b..0316e201ada 100644 --- a/arch/arm/mach-davinci/Kconfig +++ b/arch/arm/mach-davinci/Kconfig @@ -7,6 +7,7 @@ config CP_INTC bool config ARCH_DAVINCI_DMx + select CPU_ARM926T bool menu "TI DaVinci Implementations" @@ -41,6 +42,7 @@ config ARCH_DAVINCI_DA850 select ARCH_HAS_CPUFREQ config ARCH_DAVINCI_DA8XX + select CPU_ARM926T bool config ARCH_DAVINCI_DM365 diff --git a/arch/arm/mach-davinci/board-da830-evm.c b/arch/arm/mach-davinci/board-da830-evm.c index dc19870b23c..212d97084bd 100644 --- a/arch/arm/mach-davinci/board-da830-evm.c +++ b/arch/arm/mach-davinci/board-da830-evm.c @@ -33,9 +33,6 @@ #define DA830_EVM_PHY_MASK 0x0 #define DA830_EVM_MDIO_FREQUENCY 2200000 /* PHY bus frequency */ -#define DA830_EMIF25_ASYNC_DATA_CE3_BASE 0x62000000 -#define DA830_EMIF25_CONTROL_BASE 0x68000000 - /* * USB1 VBUS is controlled by GPIO1[15], over-current is reported on GPIO2[4]. */ @@ -157,7 +154,7 @@ static __init void da830_evm_usb_init(void) __func__, ret); } - ret = da8xx_pinmux_setup(da830_evm_usb11_pins); + ret = davinci_cfg_reg_list(da830_evm_usb11_pins); if (ret) { pr_warning("%s: USB 1.1 PinMux setup failed: %d\n", __func__, ret); @@ -229,15 +226,22 @@ static const short da830_evm_mmc_sd_pins[] = { }; #define DA830_MMCSD_WP_PIN GPIO_TO_PIN(2, 1) +#define DA830_MMCSD_CD_PIN GPIO_TO_PIN(2, 2) static int da830_evm_mmc_get_ro(int index) { return gpio_get_value(DA830_MMCSD_WP_PIN); } +static int da830_evm_mmc_get_cd(int index) +{ + return !gpio_get_value(DA830_MMCSD_CD_PIN); +} + static struct davinci_mmc_config da830_evm_mmc_config = { .get_ro = da830_evm_mmc_get_ro, - .wires = 4, + .get_cd = da830_evm_mmc_get_cd, + .wires = 8, .max_freq = 50000000, .caps = MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED, .version = MMC_CTLR_VERSION_2, @@ -247,7 +251,7 @@ static inline void da830_evm_init_mmc(void) { int ret; - ret = da8xx_pinmux_setup(da830_evm_mmc_sd_pins); + ret = davinci_cfg_reg_list(da830_evm_mmc_sd_pins); if (ret) { pr_warning("da830_evm_init: mmc/sd mux setup failed: %d\n", ret); @@ -262,6 +266,14 @@ static inline void da830_evm_init_mmc(void) } gpio_direction_input(DA830_MMCSD_WP_PIN); + ret = gpio_request(DA830_MMCSD_CD_PIN, "MMC CD\n"); + if (ret) { + pr_warning("da830_evm_init: can not open GPIO %d\n", + DA830_MMCSD_CD_PIN); + return; + } + gpio_direction_input(DA830_MMCSD_CD_PIN); + ret = da8xx_register_mmcsd0(&da830_evm_mmc_config); if (ret) { pr_warning("da830_evm_init: mmc/sd registration failed: %d\n", @@ -360,13 +372,13 @@ static struct davinci_nand_pdata da830_evm_nand_pdata = { static struct resource da830_evm_nand_resources[] = { [0] = { /* First memory resource is NAND I/O window */ - .start = DA830_EMIF25_ASYNC_DATA_CE3_BASE, - .end = DA830_EMIF25_ASYNC_DATA_CE3_BASE + PAGE_SIZE - 1, + .start = DA8XX_AEMIF_CS3_BASE, + .end = DA8XX_AEMIF_CS3_BASE + PAGE_SIZE - 1, .flags = IORESOURCE_MEM, }, [1] = { /* Second memory resource is AEMIF control registers */ - .start = DA830_EMIF25_CONTROL_BASE, - .end = DA830_EMIF25_CONTROL_BASE + SZ_32K - 1, + .start = DA8XX_AEMIF_CTL_BASE, + .end = DA8XX_AEMIF_CTL_BASE + SZ_32K - 1, .flags = IORESOURCE_MEM, }, }; @@ -392,7 +404,7 @@ static inline void da830_evm_init_nand(int mux_mode) return; } - ret = da8xx_pinmux_setup(da830_evm_emif25_pins); + ret = davinci_cfg_reg_list(da830_evm_emif25_pins); if (ret) pr_warning("da830_evm_init: emif25 mux setup failed: %d\n", ret); @@ -412,7 +424,7 @@ static inline void da830_evm_init_lcdc(int mux_mode) { int ret; - ret = da8xx_pinmux_setup(da830_lcdcntl_pins); + ret = davinci_cfg_reg_list(da830_lcdcntl_pins); if (ret) pr_warning("da830_evm_init: lcdcntl mux setup failed: %d\n", ret); @@ -492,7 +504,7 @@ static __init void da830_evm_init(void) pr_warning("da830_evm_init: edma registration failed: %d\n", ret); - ret = da8xx_pinmux_setup(da830_i2c0_pins); + ret = davinci_cfg_reg_list(da830_i2c0_pins); if (ret) pr_warning("da830_evm_init: i2c0 mux setup failed: %d\n", ret); @@ -508,7 +520,7 @@ static __init void da830_evm_init(void) soc_info->emac_pdata->mdio_max_freq = DA830_EVM_MDIO_FREQUENCY; soc_info->emac_pdata->rmii_en = 1; - ret = da8xx_pinmux_setup(da830_cpgmac_pins); + ret = davinci_cfg_reg_list(da830_cpgmac_pins); if (ret) pr_warning("da830_evm_init: cpgmac mux setup failed: %d\n", ret); @@ -527,7 +539,7 @@ static __init void da830_evm_init(void) i2c_register_board_info(1, da830_evm_i2c_devices, ARRAY_SIZE(da830_evm_i2c_devices)); - ret = da8xx_pinmux_setup(da830_evm_mcasp1_pins); + ret = davinci_cfg_reg_list(da830_evm_mcasp1_pins); if (ret) pr_warning("da830_evm_init: mcasp1 mux setup failed: %d\n", ret); @@ -549,14 +561,6 @@ static int __init da830_evm_console_init(void) console_initcall(da830_evm_console_init); #endif -static __init void da830_evm_irq_init(void) -{ - struct davinci_soc_info *soc_info = &davinci_soc_info; - - cp_intc_init((void __iomem *)DA8XX_CP_INTC_VIRT, DA830_N_CP_INTC_IRQ, - soc_info->intc_irq_prios); -} - static void __init da830_evm_map_io(void) { da830_init(); @@ -567,7 +571,7 @@ MACHINE_START(DAVINCI_DA830_EVM, "DaVinci DA830/OMAP-L137 EVM") .io_pg_offst = (__IO_ADDRESS(IO_PHYS) >> 18) & 0xfffc, .boot_params = (DA8XX_DDR_BASE + 0x100), .map_io = da830_evm_map_io, - .init_irq = da830_evm_irq_init, + .init_irq = cp_intc_init, .timer = &davinci_timer, .init_machine = da830_evm_init, MACHINE_END diff --git a/arch/arm/mach-davinci/board-da850-evm.c b/arch/arm/mach-davinci/board-da850-evm.c index 411284d0b0f..abd04932917 100644 --- a/arch/arm/mach-davinci/board-da850-evm.c +++ b/arch/arm/mach-davinci/board-da850-evm.c @@ -206,12 +206,12 @@ static __init void da850_evm_setup_nor_nand(void) int ret = 0; if (ui_card_detected & !HAS_MMC) { - ret = da8xx_pinmux_setup(da850_nand_pins); + ret = davinci_cfg_reg_list(da850_nand_pins); if (ret) pr_warning("da850_evm_init: nand mux setup failed: " "%d\n", ret); - ret = da8xx_pinmux_setup(da850_nor_pins); + ret = davinci_cfg_reg_list(da850_nor_pins); if (ret) pr_warning("da850_evm_init: nor mux setup failed: %d\n", ret); @@ -568,12 +568,12 @@ static int __init da850_evm_config_emac(void) if (rmii_en) { val |= BIT(8); - ret = da8xx_pinmux_setup(da850_rmii_pins); + ret = davinci_cfg_reg_list(da850_rmii_pins); pr_info("EMAC: RMII PHY configured, MII PHY will not be" " functional\n"); } else { val &= ~BIT(8); - ret = da8xx_pinmux_setup(da850_cpgmac_pins); + ret = davinci_cfg_reg_list(da850_cpgmac_pins); pr_info("EMAC: MII PHY configured, RMII PHY will not be" " functional\n"); } @@ -626,7 +626,7 @@ static __init void da850_evm_init(void) pr_warning("da850_evm_init: edma registration failed: %d\n", ret); - ret = da8xx_pinmux_setup(da850_i2c0_pins); + ret = davinci_cfg_reg_list(da850_i2c0_pins); if (ret) pr_warning("da850_evm_init: i2c0 mux setup failed: %d\n", ret); @@ -643,7 +643,7 @@ static __init void da850_evm_init(void) ret); if (HAS_MMC) { - ret = da8xx_pinmux_setup(da850_mmcsd0_pins); + ret = davinci_cfg_reg_list(da850_mmcsd0_pins); if (ret) pr_warning("da850_evm_init: mmcsd0 mux setup failed:" " %d\n", ret); @@ -679,20 +679,20 @@ static __init void da850_evm_init(void) __raw_writel(0, IO_ADDRESS(DA8XX_UART1_BASE) + 0x30); __raw_writel(0, IO_ADDRESS(DA8XX_UART0_BASE) + 0x30); - ret = da8xx_pinmux_setup(da850_mcasp_pins); + ret = davinci_cfg_reg_list(da850_mcasp_pins); if (ret) pr_warning("da850_evm_init: mcasp mux setup failed: %d\n", ret); da8xx_register_mcasp(0, &da850_evm_snd_data); - ret = da8xx_pinmux_setup(da850_lcdcntl_pins); + ret = davinci_cfg_reg_list(da850_lcdcntl_pins); if (ret) pr_warning("da850_evm_init: lcdcntl mux setup failed: %d\n", ret); /* Handle board specific muxing for LCD here */ - ret = da8xx_pinmux_setup(da850_evm_lcdc_pins); + ret = davinci_cfg_reg_list(da850_evm_lcdc_pins); if (ret) pr_warning("da850_evm_init: evm specific lcd mux setup " "failed: %d\n", ret); @@ -736,14 +736,6 @@ static int __init da850_evm_console_init(void) console_initcall(da850_evm_console_init); #endif -static __init void da850_evm_irq_init(void) -{ - struct davinci_soc_info *soc_info = &davinci_soc_info; - - cp_intc_init((void __iomem *)DA8XX_CP_INTC_VIRT, DA850_N_CP_INTC_IRQ, - soc_info->intc_irq_prios); -} - static void __init da850_evm_map_io(void) { da850_init(); @@ -754,7 +746,7 @@ MACHINE_START(DAVINCI_DA850_EVM, "DaVinci DA850/OMAP-L138 EVM") .io_pg_offst = (__IO_ADDRESS(IO_PHYS) >> 18) & 0xfffc, .boot_params = (DA8XX_DDR_BASE + 0x100), .map_io = da850_evm_map_io, - .init_irq = da850_evm_irq_init, + .init_irq = cp_intc_init, .timer = &davinci_timer, .init_machine = da850_evm_init, MACHINE_END diff --git a/arch/arm/mach-davinci/board-dm355-evm.c b/arch/arm/mach-davinci/board-dm355-evm.c index aa48e3f6971..a3191015efe 100644 --- a/arch/arm/mach-davinci/board-dm355-evm.c +++ b/arch/arm/mach-davinci/board-dm355-evm.c @@ -33,9 +33,6 @@ #include <mach/mmc.h> #include <mach/usb.h> -#define DAVINCI_ASYNC_EMIF_CONTROL_BASE 0x01e10000 -#define DAVINCI_ASYNC_EMIF_DATA_CE0_BASE 0x02000000 - /* NOTE: this is geared for the standard config, with a socketed * 2 GByte Micron NAND (MT29F16G08FAA) using 128KB sectors. If you * swap chips, maybe with a different block size, partitioning may @@ -86,12 +83,12 @@ static struct davinci_nand_pdata davinci_nand_data = { static struct resource davinci_nand_resources[] = { { - .start = DAVINCI_ASYNC_EMIF_DATA_CE0_BASE, - .end = DAVINCI_ASYNC_EMIF_DATA_CE0_BASE + SZ_32M - 1, + .start = DM355_ASYNC_EMIF_DATA_CE0_BASE, + .end = DM355_ASYNC_EMIF_DATA_CE0_BASE + SZ_32M - 1, .flags = IORESOURCE_MEM, }, { - .start = DAVINCI_ASYNC_EMIF_CONTROL_BASE, - .end = DAVINCI_ASYNC_EMIF_CONTROL_BASE + SZ_4K - 1, + .start = DM355_ASYNC_EMIF_CONTROL_BASE, + .end = DM355_ASYNC_EMIF_CONTROL_BASE + SZ_4K - 1, .flags = IORESOURCE_MEM, }, }; @@ -353,17 +350,12 @@ static __init void dm355_evm_init(void) dm355_init_asp1(ASP1_TX_EVT_EN | ASP1_RX_EVT_EN, &dm355_evm_snd_data); } -static __init void dm355_evm_irq_init(void) -{ - davinci_irq_init(); -} - MACHINE_START(DAVINCI_DM355_EVM, "DaVinci DM355 EVM") .phys_io = IO_PHYS, .io_pg_offst = (__IO_ADDRESS(IO_PHYS) >> 18) & 0xfffc, .boot_params = (0x80000100), .map_io = dm355_evm_map_io, - .init_irq = dm355_evm_irq_init, + .init_irq = davinci_irq_init, .timer = &davinci_timer, .init_machine = dm355_evm_init, MACHINE_END diff --git a/arch/arm/mach-davinci/board-dm355-leopard.c b/arch/arm/mach-davinci/board-dm355-leopard.c index 21f32eb41e8..f1d8132cf0c 100644 --- a/arch/arm/mach-davinci/board-dm355-leopard.c +++ b/arch/arm/mach-davinci/board-dm355-leopard.c @@ -30,9 +30,6 @@ #include <mach/mmc.h> #include <mach/usb.h> -#define DAVINCI_ASYNC_EMIF_CONTROL_BASE 0x01e10000 -#define DAVINCI_ASYNC_EMIF_DATA_CE0_BASE 0x02000000 - /* NOTE: this is geared for the standard config, with a socketed * 2 GByte Micron NAND (MT29F16G08FAA) using 128KB sectors. If you * swap chips, maybe with a different block size, partitioning may @@ -82,12 +79,12 @@ static struct davinci_nand_pdata davinci_nand_data = { static struct resource davinci_nand_resources[] = { { - .start = DAVINCI_ASYNC_EMIF_DATA_CE0_BASE, - .end = DAVINCI_ASYNC_EMIF_DATA_CE0_BASE + SZ_32M - 1, + .start = DM355_ASYNC_EMIF_DATA_CE0_BASE, + .end = DM355_ASYNC_EMIF_DATA_CE0_BASE + SZ_32M - 1, .flags = IORESOURCE_MEM, }, { - .start = DAVINCI_ASYNC_EMIF_CONTROL_BASE, - .end = DAVINCI_ASYNC_EMIF_CONTROL_BASE + SZ_4K - 1, + .start = DM355_ASYNC_EMIF_CONTROL_BASE, + .end = DM355_ASYNC_EMIF_CONTROL_BASE + SZ_4K - 1, .flags = IORESOURCE_MEM, }, }; @@ -272,17 +269,12 @@ static __init void dm355_leopard_init(void) ARRAY_SIZE(dm355_leopard_spi_info)); } -static __init void dm355_leopard_irq_init(void) -{ - davinci_irq_init(); -} - MACHINE_START(DM355_LEOPARD, "DaVinci DM355 leopard") .phys_io = IO_PHYS, .io_pg_offst = (__IO_ADDRESS(IO_PHYS) >> 18) & 0xfffc, .boot_params = (0x80000100), .map_io = dm355_leopard_map_io, - .init_irq = dm355_leopard_irq_init, + .init_irq = davinci_irq_init, .timer = &davinci_timer, .init_machine = dm355_leopard_init, MACHINE_END diff --git a/arch/arm/mach-davinci/board-dm365-evm.c b/arch/arm/mach-davinci/board-dm365-evm.c index df4ab210586..98814e6a598 100644 --- a/arch/arm/mach-davinci/board-dm365-evm.c +++ b/arch/arm/mach-davinci/board-dm365-evm.c @@ -54,11 +54,6 @@ static inline int have_tvp7002(void) return 0; } - -#define DM365_ASYNC_EMIF_CONTROL_BASE 0x01d10000 -#define DM365_ASYNC_EMIF_DATA_CE0_BASE 0x02000000 -#define DM365_ASYNC_EMIF_DATA_CE1_BASE 0x04000000 - #define DM365_EVM_PHY_MASK (0x2) #define DM365_EVM_MDIO_FREQUENCY (2200000) /* PHY bus frequency */ @@ -613,17 +608,12 @@ static __init void dm365_evm_init(void) ARRAY_SIZE(dm365_evm_spi_info)); } -static __init void dm365_evm_irq_init(void) -{ - davinci_irq_init(); -} - MACHINE_START(DAVINCI_DM365_EVM, "DaVinci DM365 EVM") .phys_io = IO_PHYS, .io_pg_offst = (__IO_ADDRESS(IO_PHYS) >> 18) & 0xfffc, .boot_params = (0x80000100), .map_io = dm365_evm_map_io, - .init_irq = dm365_evm_irq_init, + .init_irq = davinci_irq_init, .timer = &davinci_timer, .init_machine = dm365_evm_init, MACHINE_END diff --git a/arch/arm/mach-davinci/board-dm644x-evm.c b/arch/arm/mach-davinci/board-dm644x-evm.c index 976e11b7fa4..34c8b418cd7 100644 --- a/arch/arm/mach-davinci/board-dm644x-evm.c +++ b/arch/arm/mach-davinci/board-dm644x-evm.c @@ -41,14 +41,6 @@ #define DM644X_EVM_PHY_MASK (0x2) #define DM644X_EVM_MDIO_FREQUENCY (2200000) /* PHY bus frequency */ -#define DAVINCI_CFC_ATA_BASE 0x01C66000 - -#define DAVINCI_ASYNC_EMIF_CONTROL_BASE 0x01e00000 -#define DAVINCI_ASYNC_EMIF_DATA_CE0_BASE 0x02000000 -#define DAVINCI_ASYNC_EMIF_DATA_CE1_BASE 0x04000000 -#define DAVINCI_ASYNC_EMIF_DATA_CE2_BASE 0x06000000 -#define DAVINCI_ASYNC_EMIF_DATA_CE3_BASE 0x08000000 - #define LXT971_PHY_ID (0x001378e2) #define LXT971_PHY_MASK (0xfffffff0) @@ -92,8 +84,8 @@ static struct physmap_flash_data davinci_evm_norflash_data = { /* NOTE: CFI probe will correctly detect flash part as 32M, but EMIF * limits addresses to 16M, so using addresses past 16M will wrap */ static struct resource davinci_evm_norflash_resource = { - .start = DAVINCI_ASYNC_EMIF_DATA_CE0_BASE, - .end = DAVINCI_ASYNC_EMIF_DATA_CE0_BASE + SZ_16M - 1, + .start = DM644X_ASYNC_EMIF_DATA_CE0_BASE, + .end = DM644X_ASYNC_EMIF_DATA_CE0_BASE + SZ_16M - 1, .flags = IORESOURCE_MEM, }; @@ -111,7 +103,7 @@ static struct platform_device davinci_evm_norflash_device = { * It may used instead of the (default) NOR chip to boot, using TI's * tools to install the secondary boot loader (UBL) and U-Boot. */ -struct mtd_partition davinci_evm_nandflash_partition[] = { +static struct mtd_partition davinci_evm_nandflash_partition[] = { /* Bootloader layout depends on whose u-boot is installed, but we * can hide all the details. * - block 0 for u-boot environment ... in mainline u-boot @@ -154,12 +146,12 @@ static struct davinci_nand_pdata davinci_evm_nandflash_data = { static struct resource davinci_evm_nandflash_resource[] = { { - .start = DAVINCI_ASYNC_EMIF_DATA_CE0_BASE, - .end = DAVINCI_ASYNC_EMIF_DATA_CE0_BASE + SZ_16M - 1, + .start = DM644X_ASYNC_EMIF_DATA_CE0_BASE, + .end = DM644X_ASYNC_EMIF_DATA_CE0_BASE + SZ_16M - 1, .flags = IORESOURCE_MEM, }, { - .start = DAVINCI_ASYNC_EMIF_CONTROL_BASE, - .end = DAVINCI_ASYNC_EMIF_CONTROL_BASE + SZ_4K - 1, + .start = DM644X_ASYNC_EMIF_CONTROL_BASE, + .end = DM644X_ASYNC_EMIF_CONTROL_BASE + SZ_4K - 1, .flags = IORESOURCE_MEM, }, }; @@ -258,32 +250,6 @@ static struct platform_device rtc_dev = { .id = -1, }; -static struct resource ide_resources[] = { - { - .start = DAVINCI_CFC_ATA_BASE, - .end = DAVINCI_CFC_ATA_BASE + 0x7ff, - .flags = IORESOURCE_MEM, - }, - { - .start = IRQ_IDE, - .end = IRQ_IDE, - .flags = IORESOURCE_IRQ, - }, -}; - -static u64 ide_dma_mask = DMA_BIT_MASK(32); - -static struct platform_device ide_dev = { - .name = "palm_bk3710", - .id = -1, - .resource = ide_resources, - .num_resources = ARRAY_SIZE(ide_resources), - .dev = { - .dma_mask = &ide_dma_mask, - .coherent_dma_mask = DMA_BIT_MASK(32), - }, -}; - static struct snd_platform_data dm644x_evm_snd_data; /*----------------------------------------------------------------------*/ @@ -704,10 +670,7 @@ static __init void davinci_evm_init(void) pr_warning("WARNING: both IDE and Flash are " "enabled, but they share AEMIF pins.\n" "\tDisable IDE for NAND/NOR support.\n"); - davinci_cfg_reg(DM644X_HPIEN_DISABLE); - davinci_cfg_reg(DM644X_ATAEN); - davinci_cfg_reg(DM644X_HDIREN); - platform_device_register(&ide_dev); + davinci_init_ide(); } else if (HAS_NAND || HAS_NOR) { davinci_cfg_reg(DM644X_HPIEN_DISABLE); davinci_cfg_reg(DM644X_ATAEN_DISABLE); @@ -741,18 +704,13 @@ static __init void davinci_evm_init(void) } -static __init void davinci_evm_irq_init(void) -{ - davinci_irq_init(); -} - MACHINE_START(DAVINCI_EVM, "DaVinci DM644x EVM") /* Maintainer: MontaVista Software <source@mvista.com> */ .phys_io = IO_PHYS, .io_pg_offst = (__IO_ADDRESS(IO_PHYS) >> 18) & 0xfffc, .boot_params = (DAVINCI_DDR_BASE + 0x100), .map_io = davinci_evm_map_io, - .init_irq = davinci_evm_irq_init, + .init_irq = davinci_irq_init, .timer = &davinci_timer, .init_machine = davinci_evm_init, MACHINE_END diff --git a/arch/arm/mach-davinci/board-dm646x-evm.c b/arch/arm/mach-davinci/board-dm646x-evm.c index 5ba3cb2daaa..6d8889342c9 100644 --- a/arch/arm/mach-davinci/board-dm646x-evm.c +++ b/arch/arm/mach-davinci/board-dm646x-evm.c @@ -80,17 +80,14 @@ static struct davinci_nand_pdata davinci_nand_data = { .options = 0, }; -#define DAVINCI_ASYNC_EMIF_CONTROL_BASE 0x20008000 -#define DAVINCI_ASYNC_EMIF_DATA_CE0_BASE 0x42000000 - static struct resource davinci_nand_resources[] = { { - .start = DAVINCI_ASYNC_EMIF_DATA_CE0_BASE, - .end = DAVINCI_ASYNC_EMIF_DATA_CE0_BASE + SZ_32M - 1, + .start = DM646X_ASYNC_EMIF_CS2_SPACE_BASE, + .end = DM646X_ASYNC_EMIF_CS2_SPACE_BASE + SZ_32M - 1, .flags = IORESOURCE_MEM, }, { - .start = DAVINCI_ASYNC_EMIF_CONTROL_BASE, - .end = DAVINCI_ASYNC_EMIF_CONTROL_BASE + SZ_4K - 1, + .start = DM646X_ASYNC_EMIF_CONTROL_BASE, + .end = DM646X_ASYNC_EMIF_CONTROL_BASE + SZ_4K - 1, .flags = IORESOURCE_MEM, }, }; @@ -736,17 +733,12 @@ static __init void evm_init(void) platform_device_register(&davinci_nand_device); if (HAS_ATA) - dm646x_init_ide(); + davinci_init_ide(); soc_info->emac_pdata->phy_mask = DM646X_EVM_PHY_MASK; soc_info->emac_pdata->mdio_max_freq = DM646X_EVM_MDIO_FREQUENCY; } -static __init void davinci_dm646x_evm_irq_init(void) -{ - davinci_irq_init(); -} - #define DM646X_EVM_REF_FREQ 27000000 #define DM6467T_EVM_REF_FREQ 33000000 @@ -763,7 +755,7 @@ MACHINE_START(DAVINCI_DM6467_EVM, "DaVinci DM646x EVM") .io_pg_offst = (__IO_ADDRESS(IO_PHYS) >> 18) & 0xfffc, .boot_params = (0x80000100), .map_io = davinci_map_io, - .init_irq = davinci_dm646x_evm_irq_init, + .init_irq = davinci_irq_init, .timer = &davinci_timer, .init_machine = evm_init, MACHINE_END @@ -773,7 +765,7 @@ MACHINE_START(DAVINCI_DM6467TEVM, "DaVinci DM6467T EVM") .io_pg_offst = (__IO_ADDRESS(IO_PHYS) >> 18) & 0xfffc, .boot_params = (0x80000100), .map_io = davinci_map_io, - .init_irq = davinci_dm646x_evm_irq_init, + .init_irq = davinci_irq_init, .timer = &davinci_timer, .init_machine = evm_init, MACHINE_END diff --git a/arch/arm/mach-davinci/board-neuros-osd2.c b/arch/arm/mach-davinci/board-neuros-osd2.c index bd9ca079b69..4c30e929bbf 100644 --- a/arch/arm/mach-davinci/board-neuros-osd2.c +++ b/arch/arm/mach-davinci/board-neuros-osd2.c @@ -31,6 +31,7 @@ #include <asm/mach/arch.h> #include <mach/dm644x.h> +#include <mach/common.h> #include <mach/i2c.h> #include <mach/serial.h> #include <mach/mux.h> @@ -41,11 +42,6 @@ #define NEUROS_OSD2_PHY_MASK 0x2 #define NEUROS_OSD2_MDIO_FREQUENCY 2200000 /* PHY bus frequency */ -#define DAVINCI_CFC_ATA_BASE 0x01C66000 - -#define DAVINCI_ASYNC_EMIF_CONTROL_BASE 0x01e00000 -#define DAVINCI_ASYNC_EMIF_DATA_CE0_BASE 0x02000000 - #define LXT971_PHY_ID 0x001378e2 #define LXT971_PHY_MASK 0xfffffff0 @@ -60,7 +56,7 @@ #define NAND_BLOCK_SIZE SZ_128K -struct mtd_partition davinci_ntosd2_nandflash_partition[] = { +static struct mtd_partition davinci_ntosd2_nandflash_partition[] = { { /* UBL (a few copies) plus U-Boot */ .name = "bootloader", @@ -98,12 +94,12 @@ static struct davinci_nand_pdata davinci_ntosd2_nandflash_data = { static struct resource davinci_ntosd2_nandflash_resource[] = { { - .start = DAVINCI_ASYNC_EMIF_DATA_CE0_BASE, - .end = DAVINCI_ASYNC_EMIF_DATA_CE0_BASE + SZ_16M - 1, + .start = DM644X_ASYNC_EMIF_DATA_CE0_BASE, + .end = DM644X_ASYNC_EMIF_DATA_CE0_BASE + SZ_16M - 1, .flags = IORESOURCE_MEM, }, { - .start = DAVINCI_ASYNC_EMIF_CONTROL_BASE, - .end = DAVINCI_ASYNC_EMIF_CONTROL_BASE + SZ_4K - 1, + .start = DM644X_ASYNC_EMIF_CONTROL_BASE, + .end = DM644X_ASYNC_EMIF_CONTROL_BASE + SZ_4K - 1, .flags = IORESOURCE_MEM, }, }; @@ -130,32 +126,6 @@ static struct platform_device davinci_fb_device = { .num_resources = 0, }; -static struct resource ide_resources[] = { - { - .start = DAV |