diff options
| -rw-r--r-- | drivers/video/omap2/displays-new/Kconfig | 7 | ||||
| -rw-r--r-- | drivers/video/omap2/displays-new/Makefile | 1 | ||||
| -rw-r--r-- | drivers/video/omap2/displays-new/panel-tpo-td043mtea1.c | 646 | ||||
| -rw-r--r-- | include/video/omap-panel-data.h | 16 |
4 files changed, 670 insertions, 0 deletions
diff --git a/drivers/video/omap2/displays-new/Kconfig b/drivers/video/omap2/displays-new/Kconfig index 917db6e7966..c66ecb23e3d 100644 --- a/drivers/video/omap2/displays-new/Kconfig +++ b/drivers/video/omap2/displays-new/Kconfig @@ -55,4 +55,11 @@ config DISPLAY_PANEL_SHARP_LS037V7DW01 depends on BACKLIGHT_CLASS_DEVICE help LCD Panel used in TI's SDP3430 and EVM boards + +config DISPLAY_PANEL_TPO_TD043MTEA1 + tristate "TPO TD043MTEA1 LCD Panel" + depends on SPI + help + LCD Panel used in OMAP3 Pandora + endmenu diff --git a/drivers/video/omap2/displays-new/Makefile b/drivers/video/omap2/displays-new/Makefile index dde7b8ddda0..628ea3e7bb6 100644 --- a/drivers/video/omap2/displays-new/Makefile +++ b/drivers/video/omap2/displays-new/Makefile @@ -8,3 +8,4 @@ obj-$(CONFIG_DISPLAY_PANEL_DSI_CM) += panel-dsi-cm.o obj-$(CONFIG_DISPLAY_PANEL_SONY_ACX565AKM) += panel-sony-acx565akm.o obj-$(CONFIG_DISPLAY_PANEL_LGPHILIPS_LB035Q02) += panel-lgphilips-lb035q02.o obj-$(CONFIG_DISPLAY_PANEL_SHARP_LS037V7DW01) += panel-sharp-ls037v7dw01.o +obj-$(CONFIG_DISPLAY_PANEL_TPO_TD043MTEA1) += panel-tpo-td043mtea1.o diff --git a/drivers/video/omap2/displays-new/panel-tpo-td043mtea1.c b/drivers/video/omap2/displays-new/panel-tpo-td043mtea1.c new file mode 100644 index 00000000000..eadc6529fa3 --- /dev/null +++ b/drivers/video/omap2/displays-new/panel-tpo-td043mtea1.c @@ -0,0 +1,646 @@ +/* + * TPO TD043MTEA1 Panel driver + * + * Author: Gražvydas Ignotas <notasas@gmail.com> + * Converted to new DSS device model: Tomi Valkeinen <tomi.valkeinen@ti.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <linux/module.h> +#include <linux/delay.h> +#include <linux/spi/spi.h> +#include <linux/regulator/consumer.h> +#include <linux/gpio.h> +#include <linux/err.h> +#include <linux/slab.h> + +#include <video/omapdss.h> +#include <video/omap-panel-data.h> + +#define TPO_R02_MODE(x) ((x) & 7) +#define TPO_R02_MODE_800x480 7 +#define TPO_R02_NCLK_RISING BIT(3) +#define TPO_R02_HSYNC_HIGH BIT(4) +#define TPO_R02_VSYNC_HIGH BIT(5) + +#define TPO_R03_NSTANDBY BIT(0) +#define TPO_R03_EN_CP_CLK BIT(1) +#define TPO_R03_EN_VGL_PUMP BIT(2) +#define TPO_R03_EN_PWM BIT(3) +#define TPO_R03_DRIVING_CAP_100 BIT(4) +#define TPO_R03_EN_PRE_CHARGE BIT(6) +#define TPO_R03_SOFTWARE_CTL BIT(7) + +#define TPO_R04_NFLIP_H BIT(0) +#define TPO_R04_NFLIP_V BIT(1) +#define TPO_R04_CP_CLK_FREQ_1H BIT(2) +#define TPO_R04_VGL_FREQ_1H BIT(4) + +#define TPO_R03_VAL_NORMAL (TPO_R03_NSTANDBY | TPO_R03_EN_CP_CLK | \ + TPO_R03_EN_VGL_PUMP | TPO_R03_EN_PWM | \ + TPO_R03_DRIVING_CAP_100 | TPO_R03_EN_PRE_CHARGE | \ + TPO_R03_SOFTWARE_CTL) + +#define TPO_R03_VAL_STANDBY (TPO_R03_DRIVING_CAP_100 | \ + TPO_R03_EN_PRE_CHARGE | TPO_R03_SOFTWARE_CTL) + +static const u16 tpo_td043_def_gamma[12] = { + 105, 315, 381, 431, 490, 537, 579, 686, 780, 837, 880, 1023 +}; + +struct panel_drv_data { + struct omap_dss_device dssdev; + struct omap_dss_device *in; + + struct omap_video_timings videomode; + + int data_lines; + + struct spi_device *spi; + struct regulator *vcc_reg; + int nreset_gpio; + u16 gamma[12]; + u32 mode; + u32 hmirror:1; + u32 vmirror:1; + u32 powered_on:1; + u32 spi_suspended:1; + u32 power_on_resume:1; +}; + +static const struct omap_video_timings tpo_td043_timings = { + .x_res = 800, + .y_res = 480, + + .pixel_clock = 36000, + + .hsw = 1, + .hfp = 68, + .hbp = 214, + + .vsw = 1, + .vfp = 39, + .vbp = 34, + + .vsync_level = OMAPDSS_SIG_ACTIVE_LOW, + .hsync_level = OMAPDSS_SIG_ACTIVE_LOW, + .data_pclk_edge = OMAPDSS_DRIVE_SIG_FALLING_EDGE, + .de_level = OMAPDSS_SIG_ACTIVE_HIGH, + .sync_pclk_edge = OMAPDSS_DRIVE_SIG_OPPOSITE_EDGES, +}; + +#define to_panel_data(p) container_of(p, struct panel_drv_data, dssdev) + +static int tpo_td043_write(struct spi_device *spi, u8 addr, u8 data) +{ + struct spi_message m; + struct spi_transfer xfer; + u16 w; + int r; + + spi_message_init(&m); + + memset(&xfer, 0, sizeof(xfer)); + + w = ((u16)addr << 10) | (1 << 8) | data; + xfer.tx_buf = &w; + xfer.bits_per_word = 16; + xfer.len = 2; + spi_message_add_tail(&xfer, &m); + + r = spi_sync(spi, &m); + if (r < 0) + dev_warn(&spi->dev, "failed to write to LCD reg (%d)\n", r); + return r; +} + +static void tpo_td043_write_gamma(struct spi_device *spi, u16 gamma[12]) +{ + u8 i, val; + + /* gamma bits [9:8] */ + for (val = i = 0; i < 4; i++) + val |= (gamma[i] & 0x300) >> ((i + 1) * 2); + tpo_td043_write(spi, 0x11, val); + + for (val = i = 0; i < 4; i++) + val |= (gamma[i+4] & 0x300) >> ((i + 1) * 2); + tpo_td043_write(spi, 0x12, val); + + for (val = i = 0; i < 4; i++) + val |= (gamma[i+8] & 0x300) >> ((i + 1) * 2); + tpo_td043_write(spi, 0x13, val); + + /* gamma bits [7:0] */ + for (val = i = 0; i < 12; i++) + tpo_td043_write(spi, 0x14 + i, gamma[i] & 0xff); +} + +static int tpo_td043_write_mirror(struct spi_device *spi, bool h, bool v) +{ + u8 reg4 = TPO_R04_NFLIP_H | TPO_R04_NFLIP_V | + TPO_R04_CP_CLK_FREQ_1H | TPO_R04_VGL_FREQ_1H; + if (h) + reg4 &= ~TPO_R04_NFLIP_H; + if (v) + reg4 &= ~TPO_R04_NFLIP_V; + + return tpo_td043_write(spi, 4, reg4); +} + +static int tpo_td043_set_hmirror(struct omap_dss_device *dssdev, bool enable) +{ + struct panel_drv_data *ddata = dev_get_drvdata(dssdev->dev); + + ddata->hmirror = enable; + return tpo_td043_write_mirror(ddata->spi, ddata->hmirror, + ddata->vmirror); +} + +static bool tpo_td043_get_hmirror(struct omap_dss_device *dssdev) +{ + struct panel_drv_data *ddata = dev_get_drvdata(dssdev->dev); + + return ddata->hmirror; +} + +static ssize_t tpo_td043_vmirror_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct panel_drv_data *ddata = dev_get_drvdata(dev); + + return snprintf(buf, PAGE_SIZE, "%d\n", ddata->vmirror); +} + +static ssize_t tpo_td043_vmirror_store(struct device *dev, + struct device_attribute *attr, const char *buf, size_t count) +{ + struct panel_drv_data *ddata = dev_get_drvdata(dev); + int val; + int ret; + + ret = kstrtoint(buf, 0, &val); + if (ret < 0) + return ret; + + val = !!val; + + ret = tpo_td043_write_mirror(ddata->spi, ddata->hmirror, val); + if (ret < 0) + return ret; + + ddata->vmirror = val; + + return count; +} + +static ssize_t tpo_td043_mode_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct panel_drv_data *ddata = dev_get_drvdata(dev); + + return snprintf(buf, PAGE_SIZE, "%d\n", ddata->mode); +} + +static ssize_t tpo_td043_mode_store(struct device *dev, + struct device_attribute *attr, const char *buf, size_t count) +{ + struct panel_drv_data *ddata = dev_get_drvdata(dev); + long val; + int ret; + + ret = kstrtol(buf, 0, &val); + if (ret != 0 || val & ~7) + return -EINVAL; + + ddata->mode = val; + + val |= TPO_R02_NCLK_RISING; + tpo_td043_write(ddata->spi, 2, val); + + return count; +} + +static ssize_t tpo_td043_gamma_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct panel_drv_data *ddata = dev_get_drvdata(dev); + ssize_t len = 0; + int ret; + int i; + + for (i = 0; i < ARRAY_SIZE(ddata->gamma); i++) { + ret = snprintf(buf + len, PAGE_SIZE - len, "%u ", + ddata->gamma[i]); + if (ret < 0) + return ret; + len += ret; + } + buf[len - 1] = '\n'; + + return len; +} + +static ssize_t tpo_td043_gamma_store(struct device *dev, + struct device_attribute *attr, const char *buf, size_t count) +{ + struct panel_drv_data *ddata = dev_get_drvdata(dev); + unsigned int g[12]; + int ret; + int i; + + ret = sscanf(buf, "%u %u %u %u %u %u %u %u %u %u %u %u", + &g[0], &g[1], &g[2], &g[3], &g[4], &g[5], + &g[6], &g[7], &g[8], &g[9], &g[10], &g[11]); + + if (ret != 12) + return -EINVAL; + + for (i = 0; i < 12; i++) + ddata->gamma[i] = g[i]; + + tpo_td043_write_gamma(ddata->spi, ddata->gamma); + + return count; +} + +static DEVICE_ATTR(vmirror, S_IRUGO | S_IWUSR, + tpo_td043_vmirror_show, tpo_td043_vmirror_store); +static DEVICE_ATTR(mode, S_IRUGO | S_IWUSR, + tpo_td043_mode_show, tpo_td043_mode_store); +static DEVICE_ATTR(gamma, S_IRUGO | S_IWUSR, + tpo_td043_gamma_show, tpo_td043_gamma_store); + +static struct attribute *tpo_td043_attrs[] = { + &dev_attr_vmirror.attr, + &dev_attr_mode.attr, + &dev_attr_gamma.attr, + NULL, +}; + +static struct attribute_group tpo_td043_attr_group = { + .attrs = tpo_td043_attrs, +}; + +static int tpo_td043_power_on(struct panel_drv_data *ddata) +{ + int r; + + if (ddata->powered_on) + return 0; + + r = regulator_enable(ddata->vcc_reg); + if (r != 0) + return r; + + /* wait for panel to stabilize */ + msleep(160); + + if (gpio_is_valid(ddata->nreset_gpio)) + gpio_set_value(ddata->nreset_gpio, 1); + + tpo_td043_write(ddata->spi, 2, + TPO_R02_MODE(ddata->mode) | TPO_R02_NCLK_RISING); + tpo_td043_write(ddata->spi, 3, TPO_R03_VAL_NORMAL); + tpo_td043_write(ddata->spi, 0x20, 0xf0); + tpo_td043_write(ddata->spi, 0x21, 0xf0); + tpo_td043_write_mirror(ddata->spi, ddata->hmirror, + ddata->vmirror); + tpo_td043_write_gamma(ddata->spi, ddata->gamma); + + ddata->powered_on = 1; + return 0; +} + +static void tpo_td043_power_off(struct panel_drv_data *ddata) +{ + if (!ddata->powered_on) + return; + + tpo_td043_write(ddata->spi, 3, + TPO_R03_VAL_STANDBY | TPO_R03_EN_PWM); + + if (gpio_is_valid(ddata->nreset_gpio)) + gpio_set_value(ddata->nreset_gpio, 0); + + /* wait for at least 2 vsyncs before cutting off power */ + msleep(50); + + tpo_td043_write(ddata->spi, 3, TPO_R03_VAL_STANDBY); + + regulator_disable(ddata->vcc_reg); + + ddata->powered_on = 0; +} + +static int tpo_td043_connect(struct omap_dss_device *dssdev) +{ + struct panel_drv_data *ddata = to_panel_data(dssdev); + struct omap_dss_device *in = ddata->in; + int r; + + if (omapdss_device_is_connected(dssdev)) + return 0; + + r = in->ops.dpi->connect(in, dssdev); + if (r) + return r; + + return 0; +} + +static void tpo_td043_disconnect(struct omap_dss_device *dssdev) +{ + struct panel_drv_data *ddata = to_panel_data(dssdev); + struct omap_dss_device *in = ddata->in; + + if (!omapdss_device_is_connected(dssdev)) + return; + + in->ops.dpi->disconnect(in, dssdev); +} + +static int tpo_td043_enable(struct omap_dss_device *dssdev) +{ + struct panel_drv_data *ddata = to_panel_data(dssdev); + struct omap_dss_device *in = ddata->in; + int r; + + if (!omapdss_device_is_connected(dssdev)) + return -ENODEV; + + if (omapdss_device_is_enabled(dssdev)) + return 0; + + in->ops.dpi->set_data_lines(in, ddata->data_lines); + in->ops.dpi->set_timings(in, &ddata->videomode); + + r = in->ops.dpi->enable(in); + if (r) + return r; + + /* + * If we are resuming from system suspend, SPI clocks might not be + * enabled yet, so we'll program the LCD from SPI PM resume callback. + */ + if (!ddata->spi_suspended) { + r = tpo_td043_power_on(ddata); + if (r) { + in->ops.dpi->disable(in); + return r; + } + } + + dssdev->state = OMAP_DSS_DISPLAY_ACTIVE; + + return 0; +} + +static void tpo_td043_disable(struct omap_dss_device *dssdev) +{ + struct panel_drv_data *ddata = to_panel_data(dssdev); + struct omap_dss_device *in = ddata->in; + + if (!omapdss_device_is_enabled(dssdev)) + return; + + in->ops.dpi->disable(in); + + if (!ddata->spi_suspended) + tpo_td043_power_off(ddata); + + dssdev->state = OMAP_DSS_DISPLAY_DISABLED; +} + +static void tpo_td043_set_timings(struct omap_dss_device *dssdev, + struct omap_video_timings *timings) +{ + struct panel_drv_data *ddata = to_panel_data(dssdev); + struct omap_dss_device *in = ddata->in; + + ddata->videomode = *timings; + dssdev->panel.timings = *timings; + + in->ops.dpi->set_timings(in, timings); +} + +static void tpo_td043_get_timings(struct omap_dss_device *dssdev, + struct omap_video_timings *timings) +{ + struct panel_drv_data *ddata = to_panel_data(dssdev); + + *timings = ddata->videomode; +} + +static int tpo_td043_check_timings(struct omap_dss_device *dssdev, + struct omap_video_timings *timings) +{ + struct panel_drv_data *ddata = to_panel_data(dssdev); + struct omap_dss_device *in = ddata->in; + + return in->ops.dpi->check_timings(in, timings); +} + +static struct omap_dss_driver tpo_td043_ops = { + .connect = tpo_td043_connect, + .disconnect = tpo_td043_disconnect, + + .enable = tpo_td043_enable, + .disable = tpo_td043_disable, + + .set_timings = tpo_td043_set_timings, + .get_timings = tpo_td043_get_timings, + .check_timings = tpo_td043_check_timings, + + .set_mirror = tpo_td043_set_hmirror, + .get_mirror = tpo_td043_get_hmirror, + + .get_resolution = omapdss_default_get_resolution, +}; + + +static int tpo_td043_probe_pdata(struct spi_device *spi) +{ + const struct panel_tpo_td043mtea1_platform_data *pdata; + struct panel_drv_data *ddata = dev_get_drvdata(&spi->dev); + struct omap_dss_device *dssdev, *in; + + pdata = dev_get_platdata(&spi->dev); + + ddata->nreset_gpio = pdata->nreset_gpio; + + in = omap_dss_find_output(pdata->source); + if (in == NULL) { + dev_err(&spi->dev, "failed to find video source '%s'\n", + pdata->source); + return -EPROBE_DEFER; + } + ddata->in = in; + + ddata->data_lines = pdata->data_lines; + + dssdev = &ddata->dssdev; + dssdev->name = pdata->name; + + return 0; +} + +static int tpo_td043_probe(struct spi_device *spi) +{ + struct panel_drv_data *ddata; + struct omap_dss_device *dssdev; + int r; + + dev_dbg(&spi->dev, "%s\n", __func__); + + spi->bits_per_word = 16; + spi->mode = SPI_MODE_0; + + r = spi_setup(spi); + if (r < 0) { + dev_err(&spi->dev, "spi_setup failed: %d\n", r); + return r; + } + + ddata = devm_kzalloc(&spi->dev, sizeof(*ddata), GFP_KERNEL); + if (ddata == NULL) + return -ENOMEM; + + dev_set_drvdata(&spi->dev, ddata); + + ddata->spi = spi; + + if (dev_get_platdata(&spi->dev)) { + r = tpo_td043_probe_pdata(spi); + if (r) + return r; + } else { + return -ENODEV; + } + + ddata->mode = TPO_R02_MODE_800x480; + memcpy(ddata->gamma, tpo_td043_def_gamma, sizeof(ddata->gamma)); + + ddata->vcc_reg = devm_regulator_get(&spi->dev, "vcc"); + if (IS_ERR(ddata->vcc_reg)) { + dev_err(&spi->dev, "failed to get LCD VCC regulator\n"); + r = PTR_ERR(ddata->vcc_reg); + goto err_regulator; + } + + if (gpio_is_valid(ddata->nreset_gpio)) { + r = devm_gpio_request_one(&spi->dev, + ddata->nreset_gpio, GPIOF_OUT_INIT_LOW, + "lcd reset"); + if (r < 0) { + dev_err(&spi->dev, "couldn't request reset GPIO\n"); + goto err_gpio_req; + } + } + + r = sysfs_create_group(&spi->dev.kobj, &tpo_td043_attr_group); + if (r) { + dev_err(&spi->dev, "failed to create sysfs files\n"); + goto err_sysfs; + } + + ddata->videomode = tpo_td043_timings; + + dssdev = &ddata->dssdev; + dssdev->dev = &spi->dev; + dssdev->driver = &tpo_td043_ops; + dssdev->type = OMAP_DISPLAY_TYPE_DPI; + dssdev->owner = THIS_MODULE; + dssdev->panel.timings = ddata->videomode; + + r = omapdss_register_display(dssdev); + if (r) { + dev_err(&spi->dev, "Failed to register panel\n"); + goto err_reg; + } + + return 0; + +err_reg: + sysfs_remove_group(&spi->dev.kobj, &tpo_td043_attr_group); +err_sysfs: +err_gpio_req: +err_regulator: + omap_dss_put_device(ddata->in); + return r; +} + +static int tpo_td043_remove(struct spi_device *spi) +{ + struct panel_drv_data *ddata = dev_get_drvdata(&spi->dev); + struct omap_dss_device *dssdev = &ddata->dssdev; + struct omap_dss_device *in = ddata->in; + + dev_dbg(&ddata->spi->dev, "%s\n", __func__); + + omapdss_unregister_display(dssdev); + + tpo_td043_disable(dssdev); + tpo_td043_disconnect(dssdev); + + omap_dss_put_device(in); + + sysfs_remove_group(&spi->dev.kobj, &tpo_td043_attr_group); + + return 0; +} + +#ifdef CONFIG_PM_SLEEP +static int tpo_td043_spi_suspend(struct device *dev) +{ + struct panel_drv_data *ddata = dev_get_drvdata(dev); + + dev_dbg(dev, "tpo_td043_spi_suspend, tpo %p\n", ddata); + + ddata->power_on_resume = ddata->powered_on; + tpo_td043_power_off(ddata); + ddata->spi_suspended = 1; + + return 0; +} + +static int tpo_td043_spi_resume(struct device *dev) +{ + struct panel_drv_data *ddata = dev_get_drvdata(dev); + int ret; + + dev_dbg(dev, "tpo_td043_spi_resume\n"); + + if (ddata->power_on_resume) { + ret = tpo_td043_power_on(ddata); + if (ret) + return ret; + } + ddata->spi_suspended = 0; + + return 0; +} +#endif + +static SIMPLE_DEV_PM_OPS(tpo_td043_spi_pm, + tpo_td043_spi_suspend, tpo_td043_spi_resume); + +static struct spi_driver tpo_td043_spi_driver = { + .driver = { + .name = "panel-tpo-td043mtea1", + .owner = THIS_MODULE, + .pm = &tpo_td043_spi_pm, + }, + .probe = tpo_td043_probe, + .remove = tpo_td043_remove, +}; + +module_spi_driver(tpo_td043_spi_driver); + +MODULE_AUTHOR("Gražvydas Ignotas <notasas@gmail.com>"); +MODULE_DESCRIPTION("TPO TD043MTEA1 LCD Driver"); +MODULE_LICENSE("GPL"); diff --git a/include/video/omap-panel-data.h b/include/video/omap-panel-data.h index 5a6e1e8645d..efa1c80f724 100644 --- a/include/video/omap-panel-data.h +++ b/include/video/omap-panel-data.h @@ -322,4 +322,20 @@ struct panel_sharp_ls037v7dw01_platform_data { int ud_gpio; }; +/** + * panel-tpo-td043mtea1 platform data + * @name: name for this display entity + * @source: name of the display entity used as a video source + * @data_lines: number of DPI datalines + * @nreset_gpio: reset signal + */ +struct panel_tpo_td043mtea1_platform_data { + const char *name; + const char *source; + + int data_lines; + + int nreset_gpio; +}; + #endif /* __OMAP_PANEL_DATA_H */ |