diff options
20 files changed, 343 insertions, 371 deletions
diff --git a/arch/i386/kernel/cpu/cpufreq/Kconfig b/arch/i386/kernel/cpu/cpufreq/Kconfig index 26892d2099b..0f1eb507233 100644 --- a/arch/i386/kernel/cpu/cpufreq/Kconfig +++ b/arch/i386/kernel/cpu/cpufreq/Kconfig @@ -96,7 +96,6 @@ config X86_POWERNOW_K8_ACPI config X86_GX_SUSPMOD tristate "Cyrix MediaGX/NatSemi Geode Suspend Modulation" - depends on PCI help This add the CPUFreq driver for NatSemi Geode processors which support suspend modulation. diff --git a/arch/i386/kernel/cpu/cpufreq/cpufreq-nforce2.c b/arch/i386/kernel/cpu/cpufreq/cpufreq-nforce2.c index 2b62dee35c6..f275e0d4aee 100644 --- a/arch/i386/kernel/cpu/cpufreq/cpufreq-nforce2.c +++ b/arch/i386/kernel/cpu/cpufreq/cpufreq-nforce2.c @@ -39,7 +39,7 @@ static struct pci_dev *nforce2_chipset_dev; static int fid = 0; /* min_fsb, max_fsb: - * minimum and maximum FSB (= FSB at boot time) + * minimum and maximum FSB (= FSB at boot time) */ static int min_fsb = 0; static int max_fsb = 0; @@ -57,10 +57,10 @@ MODULE_PARM_DESC(min_fsb, #define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, "cpufreq-nforce2", msg) -/* +/** * nforce2_calc_fsb - calculate FSB * @pll: PLL value - * + * * Calculates FSB from PLL value */ static int nforce2_calc_fsb(int pll) @@ -76,10 +76,10 @@ static int nforce2_calc_fsb(int pll) return 0; } -/* +/** * nforce2_calc_pll - calculate PLL value * @fsb: FSB - * + * * Calculate PLL value for given FSB */ static int nforce2_calc_pll(unsigned int fsb) @@ -106,10 +106,10 @@ static int nforce2_calc_pll(unsigned int fsb) return NFORCE2_PLL(mul, div); } -/* +/** * nforce2_write_pll - write PLL value to chipset * @pll: PLL value - * + * * Writes new FSB PLL value to chipset */ static void nforce2_write_pll(int pll) @@ -121,15 +121,13 @@ static void nforce2_write_pll(int pll) pci_write_config_dword(nforce2_chipset_dev, NFORCE2_PLLADR, temp); /* Now write the value in all 64 registers */ - for (temp = 0; temp <= 0x3f; temp++) { - pci_write_config_dword(nforce2_chipset_dev, - NFORCE2_PLLREG, pll); - } + for (temp = 0; temp <= 0x3f; temp++) + pci_write_config_dword(nforce2_chipset_dev, NFORCE2_PLLREG, pll); return; } -/* +/** * nforce2_fsb_read - Read FSB * * Read FSB from chipset @@ -140,39 +138,32 @@ static unsigned int nforce2_fsb_read(int bootfsb) struct pci_dev *nforce2_sub5; u32 fsb, temp = 0; - /* Get chipset boot FSB from subdevice 5 (FSB at boot-time) */ nforce2_sub5 = pci_get_subsys(PCI_VENDOR_ID_NVIDIA, - 0x01EF, - PCI_ANY_ID, - PCI_ANY_ID, - NULL); - + 0x01EF,PCI_ANY_ID,PCI_ANY_ID,NULL); if (!nforce2_sub5) return 0; pci_read_config_dword(nforce2_sub5, NFORCE2_BOOTFSB, &fsb); fsb /= 1000000; - + /* Check if PLL register is already set */ - pci_read_config_byte(nforce2_chipset_dev, - NFORCE2_PLLENABLE, (u8 *)&temp); - + pci_read_config_byte(nforce2_chipset_dev,NFORCE2_PLLENABLE, (u8 *)&temp); + if(bootfsb || !temp) return fsb; /* Use PLL register FSB value */ - pci_read_config_dword(nforce2_chipset_dev, - NFORCE2_PLLREG, &temp); + pci_read_config_dword(nforce2_chipset_dev,NFORCE2_PLLREG, &temp); fsb = nforce2_calc_fsb(temp); return fsb; } -/* +/** * nforce2_set_fsb - set new FSB * @fsb: New FSB - * + * * Sets new FSB */ static int nforce2_set_fsb(unsigned int fsb) @@ -186,7 +177,7 @@ static int nforce2_set_fsb(unsigned int fsb) printk(KERN_ERR "cpufreq: FSB %d is out of range!\n", fsb); return -EINVAL; } - + tfsb = nforce2_fsb_read(0); if (!tfsb) { printk(KERN_ERR "cpufreq: Error while reading the FSB\n"); @@ -194,8 +185,7 @@ static int nforce2_set_fsb(unsigned int fsb) } /* First write? Then set actual value */ - pci_read_config_byte(nforce2_chipset_dev, - NFORCE2_PLLENABLE, (u8 *)&temp); + pci_read_config_byte(nforce2_chipset_dev,NFORCE2_PLLENABLE, (u8 *)&temp); if (!temp) { pll = nforce2_calc_pll(tfsb); @@ -223,7 +213,7 @@ static int nforce2_set_fsb(unsigned int fsb) /* Calculate the PLL reg. value */ if ((pll = nforce2_calc_pll(tfsb)) == -1) return -EINVAL; - + nforce2_write_pll(pll); #ifdef NFORCE2_DELAY mdelay(NFORCE2_DELAY); @@ -239,7 +229,7 @@ static int nforce2_set_fsb(unsigned int fsb) /** * nforce2_get - get the CPU frequency * @cpu: CPU number - * + * * Returns the CPU frequency */ static unsigned int nforce2_get(unsigned int cpu) @@ -354,10 +344,10 @@ static int nforce2_cpu_init(struct cpufreq_policy *policy) printk(KERN_INFO "cpufreq: FSB currently at %i MHz, FID %d.%d\n", fsb, fid / 10, fid % 10); - + /* Set maximum FSB to FSB at boot time */ max_fsb = nforce2_fsb_read(1); - + if(!max_fsb) return -EIO; @@ -398,17 +388,15 @@ static struct cpufreq_driver nforce2_driver = { * nforce2_detect_chipset - detect the Southbridge which contains FSB PLL logic * * Detects nForce2 A2 and C1 stepping - * + * */ static unsigned int nforce2_detect_chipset(void) { u8 revision; nforce2_chipset_dev = pci_get_subsys(PCI_VENDOR_ID_NVIDIA, - PCI_DEVICE_ID_NVIDIA_NFORCE2, - PCI_ANY_ID, - PCI_ANY_ID, - NULL); + PCI_DEVICE_ID_NVIDIA_NFORCE2, + PCI_ANY_ID, PCI_ANY_ID, NULL); if (nforce2_chipset_dev == NULL) return -ENODEV; diff --git a/arch/i386/kernel/cpu/cpufreq/elanfreq.c b/arch/i386/kernel/cpu/cpufreq/elanfreq.c index 3f7caa4ae6d..f317276afa7 100644 --- a/arch/i386/kernel/cpu/cpufreq/elanfreq.c +++ b/arch/i386/kernel/cpu/cpufreq/elanfreq.c @@ -1,16 +1,16 @@ /* - * elanfreq: cpufreq driver for the AMD ELAN family + * elanfreq: cpufreq driver for the AMD ELAN family * * (c) Copyright 2002 Robert Schwebel <r.schwebel@pengutronix.de> * - * Parts of this code are (c) Sven Geggus <sven@geggus.net> + * Parts of this code are (c) Sven Geggus <sven@geggus.net> * - * All Rights Reserved. + * All Rights Reserved. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. + * 2 of the License, or (at your option) any later version. * * 2002-02-13: - initial revision for 2.4.18-pre9 by Robert Schwebel * @@ -28,7 +28,7 @@ #include <asm/timex.h> #include <asm/io.h> -#define REG_CSCIR 0x22 /* Chip Setup and Control Index Register */ +#define REG_CSCIR 0x22 /* Chip Setup and Control Index Register */ #define REG_CSCDR 0x23 /* Chip Setup and Control Data Register */ /* Module parameter */ @@ -41,7 +41,7 @@ struct s_elan_multiplier { }; /* - * It is important that the frequencies + * It is important that the frequencies * are listed in ascending order here! */ struct s_elan_multiplier elan_multiplier[] = { @@ -72,78 +72,79 @@ static struct cpufreq_frequency_table elanfreq_table[] = { * elanfreq_get_cpu_frequency: determine current cpu speed * * Finds out at which frequency the CPU of the Elan SOC runs - * at the moment. Frequencies from 1 to 33 MHz are generated + * at the moment. Frequencies from 1 to 33 MHz are generated * the normal way, 66 and 99 MHz are called "Hyperspeed Mode" - * and have the rest of the chip running with 33 MHz. + * and have the rest of the chip running with 33 MHz. */ static unsigned int elanfreq_get_cpu_frequency(unsigned int cpu) { - u8 clockspeed_reg; /* Clock Speed Register */ - + u8 clockspeed_reg; /* Clock Speed Register */ + local_irq_disable(); - outb_p(0x80,REG_CSCIR); - clockspeed_reg = inb_p(REG_CSCDR); + outb_p(0x80,REG_CSCIR); + clockspeed_reg = inb_p(REG_CSCDR); local_irq_enable(); - if ((clockspeed_reg & 0xE0) == 0xE0) { return 0; } + if ((clockspeed_reg & 0xE0) == 0xE0) + return 0; - /* Are we in CPU clock multiplied mode (66/99 MHz)? */ - if ((clockspeed_reg & 0xE0) == 0xC0) { - if ((clockspeed_reg & 0x01) == 0) { + /* Are we in CPU clock multiplied mode (66/99 MHz)? */ + if ((clockspeed_reg & 0xE0) == 0xC0) { + if ((clockspeed_reg & 0x01) == 0) return 66000; - } else { - return 99000; - } - } + else + return 99000; + } /* 33 MHz is not 32 MHz... */ if ((clockspeed_reg & 0xE0)==0xA0) return 33000; - return ((1<<((clockspeed_reg & 0xE0) >> 5)) * 1000); + return ((1<<((clockspeed_reg & 0xE0) >> 5)) * 1000); } /** - * elanfreq_set_cpu_frequency: Change the CPU core frequency - * @cpu: cpu number + * elanfreq_set_cpu_frequency: Change the CPU core frequency + * @cpu: cpu number * @freq: frequency in kHz * - * This function takes a frequency value and changes the CPU frequency + * This function takes a frequency value and changes the CPU frequency * according to this. Note that the frequency has to be checked by * elanfreq_validatespeed() for correctness! - * - * There is no return value. + * + * There is no return value. */ -static void elanfreq_set_cpu_state (unsigned int state) { - +static void elanfreq_set_cpu_state (unsigned int state) +{ struct cpufreq_freqs freqs; freqs.old = elanfreq_get_cpu_frequency(0); freqs.new = elan_multiplier[state].clock; freqs.cpu = 0; /* elanfreq.c is UP only driver */ - + cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); - printk(KERN_INFO "elanfreq: attempting to set frequency to %i kHz\n",elan_multiplier[state].clock); + printk(KERN_INFO "elanfreq: attempting to set frequency to %i kHz\n", + elan_multiplier[state].clock); - /* - * Access to the Elan's internal registers is indexed via - * 0x22: Chip Setup & Control Register Index Register (CSCI) - * 0x23: Chip Setup & Control Register Data Register (CSCD) + /* + * Access to the Elan's internal registers is indexed via + * 0x22: Chip Setup & Control Register Index Register (CSCI) + * 0x23: Chip Setup & Control Register Data Register (CSCD) * */ - /* - * 0x40 is the Power Management Unit's Force Mode Register. + /* + * 0x40 is the Power Management Unit's Force Mode Register. * Bit 6 enables Hyperspeed Mode (66/100 MHz core frequency) */ local_irq_disable(); - outb_p(0x40,REG_CSCIR); /* Disable hyperspeed mode */ + outb_p(0x40,REG_CSCIR); /* Disable hyperspeed mode */ outb_p(0x00,REG_CSCDR); local_irq_enable(); /* wait till internal pipelines and */ udelay(1000); /* buffers have cleaned up */ @@ -166,10 +167,10 @@ static void elanfreq_set_cpu_state (unsigned int state) { /** * elanfreq_validatespeed: test if frequency range is valid - * @policy: the policy to validate + * @policy: the policy to validate * - * This function checks if a given frequency range in kHz is valid - * for the hardware supported by the driver. + * This function checks if a given frequency range in kHz is valid + * for the hardware supported by the driver. */ static int elanfreq_verify (struct cpufreq_policy *policy) @@ -177,11 +178,11 @@ static int elanfreq_verify (struct cpufreq_policy *policy) return cpufreq_frequency_table_verify(policy, &elanfreq_table[0]); } -static int elanfreq_target (struct cpufreq_policy *policy, - unsigned int target_freq, +static int elanfreq_target (struct cpufreq_policy *policy, + unsigned int target_freq, unsigned int relation) { - unsigned int newstate = 0; + unsigned int newstate = 0; if (cpufreq_frequency_table_target(policy, &elanfreq_table[0], target_freq, relation, &newstate)) return -EINVAL; @@ -212,7 +213,7 @@ static int elanfreq_cpu_init(struct cpufreq_policy *policy) max_freq = elanfreq_get_cpu_frequency(0); /* table init */ - for (i=0; (elanfreq_table[i].frequency != CPUFREQ_TABLE_END); i++) { + for (i=0; (elanfreq_table[i].frequency != CPUFREQ_TABLE_END); i++) { if (elanfreq_table[i].frequency > max_freq) elanfreq_table[i].frequency = CPUFREQ_ENTRY_INVALID; } @@ -226,8 +227,7 @@ static int elanfreq_cpu_init(struct cpufreq_policy *policy) if (result) return (result); - cpufreq_frequency_table_get_attr(elanfreq_table, policy->cpu); - + cpufreq_frequency_table_get_attr(elanfreq_table, policy->cpu); return 0; } @@ -268,9 +268,9 @@ static struct freq_attr* elanfreq_attr[] = { static struct cpufreq_driver elanfreq_driver = { - .get = elanfreq_get_cpu_frequency, - .verify = elanfreq_verify, - .target = elanfreq_target, + .get = elanfreq_get_cpu_frequency, + .verify = elanfreq_verify, + .target = elanfreq_target, .init = elanfreq_cpu_init, .exit = elanfreq_cpu_exit, .name = "elanfreq", @@ -279,23 +279,21 @@ static struct cpufreq_driver elanfreq_driver = { }; -static int __init elanfreq_init(void) -{ +static int __init elanfreq_init(void) +{ struct cpuinfo_x86 *c = cpu_data; /* Test if we have the right hardware */ if ((c->x86_vendor != X86_VENDOR_AMD) || - (c->x86 != 4) || (c->x86_model!=10)) - { + (c->x86 != 4) || (c->x86_model!=10)) { printk(KERN_INFO "elanfreq: error: no Elan processor found!\n"); return -ENODEV; } - return cpufreq_register_driver(&elanfreq_driver); } -static void __exit elanfreq_exit(void) +static void __exit elanfreq_exit(void) { cpufreq_unregister_driver(&elanfreq_driver); } @@ -309,4 +307,3 @@ MODULE_DESCRIPTION("cpufreq driver for AMD's Elan CPUs"); module_init(elanfreq_init); module_exit(elanfreq_exit); - diff --git a/arch/i386/kernel/cpu/cpufreq/gx-suspmod.c b/arch/i386/kernel/cpu/cpufreq/gx-suspmod.c index e86ea486c31..65b8fa2b0ee 100644 --- a/arch/i386/kernel/cpu/cpufreq/gx-suspmod.c +++ b/arch/i386/kernel/cpu/cpufreq/gx-suspmod.c @@ -6,12 +6,12 @@ * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation + * version 2 as published by the Free Software Foundation * * The author(s) of this software shall not be held liable for damages * of any nature resulting due to the use of this software. This * software is provided AS-IS with no warranties. - * + * * Theoritical note: * * (see Geode(tm) CS5530 manual (rev.4.1) page.56) @@ -21,18 +21,18 @@ * * Suspend Modulation works by asserting and de-asserting the SUSP# pin * to CPU(GX1/GXLV) for configurable durations. When asserting SUSP# - * the CPU enters an idle state. GX1 stops its core clock when SUSP# is + * the CPU enters an idle state. GX1 stops its core clock when SUSP# is * asserted then power consumption is reduced. * - * Suspend Modulation's OFF/ON duration are configurable + * Suspend Modulation's OFF/ON duration are configurable * with 'Suspend Modulation OFF Count Register' * and 'Suspend Modulation ON Count Register'. - * These registers are 8bit counters that represent the number of + * These registers are 8bit counters that represent the number of * 32us intervals which the SUSP# pin is asserted(ON)/de-asserted(OFF) * to the processor. * - * These counters define a ratio which is the effective frequency - * of operation of the system. + * These counters define a ratio which is the effective frequency + * of operation of the system. * * OFF Count * F_eff = Fgx * ---------------------- @@ -40,24 +40,24 @@ * * 0 <= On Count, Off Count <= 255 * - * From these limits, we can get register values + * From these limits, we can get register values * * off_duration + on_duration <= MAX_DURATION * on_duration = off_duration * (stock_freq - freq) / freq * - * off_duration = (freq * DURATION) / stock_freq - * on_duration = DURATION - off_duration + * off_duration = (freq * DURATION) / stock_freq + * on_duration = DURATION - off_duration * * *--------------------------------------------------------------------------- * * ChangeLog: - * Dec. 12, 2003 Hiroshi Miura <miura@da-cha.org> - * - fix on/off register mistake - * - fix cpu_khz calc when it stops cpu modulation. + * Dec. 12, 2003 Hiroshi Miura <miura@da-cha.org> + * - fix on/off register mistake + * - fix cpu_khz calc when it stops cpu modulation. * - * Dec. 11, 2002 Hiroshi Miura <miura@da-cha.org> - * - rewrite for Cyrix MediaGX Cx5510/5520 and + * Dec. 11, 2002 Hiroshi Miura <miura@da-cha.org> + * - rewrite for Cyrix MediaGX Cx5510/5520 and * NatSemi Geode Cs5530(A). * * Jul. ??, 2002 Zwane Mwaikambo <zwane@commfireservices.com> @@ -74,40 +74,40 @@ ************************************************************************/ #include <linux/kernel.h> -#include <linux/module.h> +#include <linux/module.h> #include <linux/init.h> #include <linux/smp.h> #include <linux/cpufreq.h> #include <linux/pci.h> -#include <asm/processor.h> +#include <asm/processor.h> #include <asm/errno.h> /* PCI config registers, all at F0 */ -#define PCI_PMER1 0x80 /* power management enable register 1 */ -#define PCI_PMER2 0x81 /* power management enable register 2 */ -#define PCI_PMER3 0x82 /* power management enable register 3 */ -#define PCI_IRQTC 0x8c /* irq speedup timer counter register:typical 2 to 4ms */ -#define PCI_VIDTC 0x8d /* video speedup timer counter register: typical 50 to 100ms */ -#define PCI_MODOFF 0x94 /* suspend modulation OFF counter register, 1 = 32us */ -#define PCI_MODON 0x95 /* suspend modulation ON counter register */ -#define PCI_SUSCFG 0x96 /* suspend configuration register */ +#define PCI_PMER1 0x80 /* power management enable register 1 */ +#define PCI_PMER2 0x81 /* power management enable register 2 */ +#define PCI_PMER3 0x82 /* power management enable register 3 */ +#define PCI_IRQTC 0x8c /* irq speedup timer counter register:typical 2 to 4ms */ +#define PCI_VIDTC 0x8d /* video speedup timer counter register: typical 50 to 100ms */ +#define PCI_MODOFF 0x94 /* suspend modulation OFF counter register, 1 = 32us */ +#define PCI_MODON 0x95 /* suspend modulation ON counter register */ +#define PCI_SUSCFG 0x96 /* suspend configuration register */ /* PMER1 bits */ -#define GPM (1<<0) /* global power management */ -#define GIT (1<<1) /* globally enable PM device idle timers */ -#define GTR (1<<2) /* globally enable IO traps */ -#define IRQ_SPDUP (1<<3) /* disable clock throttle during interrupt handling */ -#define VID_SPDUP (1<<4) /* disable clock throttle during vga video handling */ +#define GPM (1<<0) /* global power management */ +#define GIT (1<<1) /* globally enable PM device idle timers */ +#define GTR (1<<2) /* globally enable IO traps */ +#define IRQ_SPDUP (1<<3) /* disable clock throttle during interrupt handling */ +#define VID_SPDUP (1<<4) /* disable clock throttle during vga video handling */ /* SUSCFG bits */ -#define SUSMOD (1<<0) /* enable/disable suspend modulation */ -/* the belows support only with cs5530 (after rev.1.2)/cs5530A */ -#define SMISPDUP (1<<1) /* select how SMI re-enable suspend modulation: */ - /* IRQTC timer or read SMI speedup disable reg.(F1BAR[08-09h]) */ -#define SUSCFG (1<<2) /* enable powering down a GXLV processor. "Special 3Volt Suspend" mode */ -/* the belows support only with cs5530A */ -#define PWRSVE_ISA (1<<3) /* stop ISA clock */ -#define PWRSVE (1<<4) /* active idle */ +#define SUSMOD (1<<0) /* enable/disable suspend modulation */ +/* the belows support only with cs5530 (after rev.1.2)/cs5530A */ +#define SMISPDUP (1<<1) /* select how SMI re-enable suspend modulation: */ + /* IRQTC timer or read SMI speedup disable reg.(F1BAR[08-09h]) */ +#define SUSCFG (1<<2) /* enable powering down a GXLV processor. "Special 3Volt Suspend" mode */ +/* the belows support only with cs5530A */ +#define PWRSVE_ISA (1<<3) /* stop ISA clock */ +#define PWRSVE (1<<4) /* active idle */ struct gxfreq_params { u8 on_duration; @@ -128,7 +128,7 @@ module_param (pci_busclk, int, 0444); /* maximum duration for which the cpu may be suspended * (32us * MAX_DURATION). If no parameter is given, this defaults - * to 255. + * to 255. * Note that this leads to a maximum of 8 ms(!) where the CPU clock * is suspended -- processing power is just 0.39% of what it used to be, * though. 781.25 kHz(!) for a 200 MHz processor -- wow. */ @@ -144,17 +144,17 @@ module_param (max_duration, int, 0444); #define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, "gx-suspmod", msg) /** - * we can detect a core multipiler from dir0_lsb - * from GX1 datasheet p.56, - * MULT[3:0]: - * 0000 = SYSCLK multiplied by 4 (test only) - * 0001 = SYSCLK multiplied by 10 - * 0010 = SYSCLK multiplied by 4 - * 0011 = SYSCLK multiplied by 6 - * 0100 = SYSCLK multiplied by 9 - * 0101 = SYSCLK multiplied by 5 - * 0110 = SYSCLK multiplied by 7 - * 0111 = SYSCLK multiplied by 8 + * we can detect a core multipiler from dir0_lsb + * from GX1 datasheet p.56, + * MULT[3:0]: + * 0000 = SYSCLK multiplied by 4 (test only) + * 0001 = SYSCLK multiplied by 10 + * 0010 = SYSCLK multiplied by 4 + * 0011 = SYSCLK multiplied by 6 + * 0100 = SYSCLK multiplied by 9 + * 0101 = SYSCLK multiplied by 5 + * 0110 = SYSCLK multiplied by 7 + * 0111 = SYSCLK multiplied by 8 * of 33.3MHz **/ static int gx_freq_mult[16] = { @@ -164,17 +164,17 @@ static int gx_freq_mult[16] = { /**************************************************************** - * Low Level chipset interface * + * Low Level chipset interface * ****************************************************************/ static struct pci_device_id gx_chipset_tbl[] __initdata = { - { PCI_VENDOR_ID_CYRIX, PCI_DEVICE_ID_CYRIX_5530_LEGACY, PCI_ANY_ID, PCI_ANY_ID }, - { PCI_VENDOR_ID_CYRIX, PCI_DEVICE_ID_CYRIX_5520, PCI_ANY_ID, PCI_ANY_ID }, - { PCI_VENDOR_ID_CYRIX, PCI_DEVICE_ID_CYRIX_5510, PCI_ANY_ID, PCI_ANY_ID }, - { 0, }, + { PCI_VENDOR_ID_CYRIX, PCI_DEVICE_ID_CYRIX_5530_LEGACY, PCI_ANY_ID, PCI_ANY_ID }, + { PCI_VENDOR_ID_CYRIX, PCI_DEVICE_ID_CYRIX_5520, PCI_ANY_ID, PCI_ANY_ID }, + { PCI_VENDOR_ID_CYRIX, PCI_DEVICE_ID_CYRIX_5510, PCI_ANY_ID, PCI_ANY_ID }, + { 0, }, }; /** - * gx_detect_chipset: + * gx_detect_chipset: * **/ static __init struct pci_dev *gx_detect_chipset(void) @@ -182,17 +182,16 @@ static __init struct pci_dev *gx_detect_chipset(void) struct pci_dev *gx_pci = NULL; /* check if CPU is a MediaGX or a Geode. */ - if ((current_cpu_data.x86_vendor != X86_VENDOR_NSC) && + if ((current_cpu_data.x86_vendor != X86_VENDOR_NSC) && (current_cpu_data.x86_vendor != X86_VENDOR_CYRIX)) { dprintk("error: no MediaGX/Geode processor found!\n"); - return NULL; + return NULL; } /* detect which companion chip is used */ while ((gx_pci = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, gx_pci)) != NULL) { - if ((pci_match_id(gx_chipset_tbl, gx_pci)) != NULL) { + if ((pci_match_id(gx_chipset_tbl, gx_pci)) != NULL) return gx_pci; - } } dprintk("error: no supported chipset found!\n"); @@ -200,24 +199,24 @@ static __init struct pci_dev *gx_detect_chipset(void) } /** - * gx_get_cpuspeed: + * gx_get_cpuspeed: * * Finds out at which efficient frequency the Cyrix MediaGX/NatSemi Geode CPU runs. */ static unsigned int gx_get_cpuspeed(unsigned int cpu) { - if ((gx_params->pci_suscfg & SUSMOD) == 0) + if ((gx_params->pci_suscfg & SUSMOD) == 0) return stock_freq; - return (stock_freq * gx_params->off_duration) + return (stock_freq * gx_params->off_duration) / (gx_params->on_duration + gx_params->off_duration); } /** * gx_validate_speed: * determine current cpu speed - * -**/ + * + **/ static unsigned int gx_validate_speed(unsigned int khz, u8 *on_duration, u8 *off_duration) { @@ -230,7 +229,7 @@ static unsigned int gx_validate_speed(unsigned int khz, u8 *on_duration, u8 *off *on_duration=0; for (i=max_duration; i>0; i--) { - tmp_off = ((khz * i) / stock_freq) & 0xff; + tmp_off = ((khz * i) / stock_freq) & 0xff; tmp_on = i - tmp_off; tmp_freq = (stock_freq * tmp_off) / i; /* if this relation is closer to khz, use this. If it's equal, @@ -247,18 +246,17 @@ static unsigned int gx_validate_speed(unsigned int khz, u8 *on_duration, u8 *off /** - * gx_set_cpuspeed: - * set cpu speed in khz. + * gx_set_cpuspeed: + * set cpu speed in khz. **/ static void gx_set_cpuspeed(unsigned int khz) { - u8 suscfg, pmer1; + u8 suscfg, pmer1; unsigned int new_khz; unsigned long flags; struct cpufreq_freqs freqs; - freqs.cpu = 0; freqs.old = gx_get_cpuspeed(0); @@ -303,18 +301,18 @@ static void gx_set_cpuspeed(unsigned int khz) pci_write_config_byte(gx_params->cs55x0, PCI_MODOFF, gx_params->off_duration); pci_write_config_byte(gx_params->cs55x0, PCI_MODON, gx_params->on_duration); - pci_write_config_byte(gx_params->cs55x0, PCI_SUSCFG, suscfg); - pci_read_config_byte(gx_params->cs55x0, PCI_SUSCFG, &suscfg); + pci_write_config_byte(gx_params->cs55x0, PCI_SUSCFG, suscfg); + pci_read_config_byte(gx_params->cs55x0, PCI_SUSCFG, &suscfg); - local_irq_restore(flags); + local_irq_restore(flags); gx_params->pci_suscfg = suscfg; cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); - dprintk("suspend modulation w/ duration of ON:%d us, OFF:%d us\n", - gx_params->on_duration * 32, gx_params->off_duration * 32); - dprintk("suspend modulation w/ clock speed: %d kHz.\n", freqs.new); + dprintk("suspend modulation w/ duration of ON:%d us, OFF:%d us\n", + gx_params->on_duration * 32, gx_params->off_duration * 32); + dprintk("suspend modulation w/ clock speed: %d kHz.\n", freqs.new); } /**************************************************************** @@ -322,10 +320,10 @@ static void gx_set_cpuspeed(unsigned int khz) ****************************************************************/ /* - * cpufreq_gx_verify: test if frequency range is valid + * cpufreq_gx_verify: test if frequency range is valid * - * This function checks if a given frequency range in kHz is valid - * for the hardware supported by the driver. + * This function checks if a given frequency range in kHz is valid + * for the hardware supported by the driver. */ static int cpufreq_gx_verify(struct cpufreq_policy *policy) @@ -333,8 +331,8 @@ static int cpufreq_gx_verify(struct cpufreq_policy *policy) unsigned int tmp_freq = 0; u8 tmp1, tmp2; - if (!stock_freq || !policy) - return -EINVAL; + if (!stock_freq || !policy) + return -EINVAL; policy->cpu = 0; cpufreq_verify_within_limits(policy, (stock_freq / max_duration), stock_freq); @@ -342,14 +340,14 @@ static int cpufreq_gx_verify(struct cpufreq_policy *policy) /* it needs to be assured that at least one supported frequency is * within policy->min and policy->max. If it is not, policy->max * needs to be increased until one freuqency is supported. - * policy->min may not be decreased, though. This way we guarantee a + * policy->min may not be decreased, though. This way we guarantee a * specific processing capacity. */ tmp_freq = gx_validate_speed(policy->min, &tmp1, &tmp2); - if (tmp_freq < policy->min) + if (tmp_freq < policy->min) tmp_freq += stock_freq / max_duration; policy->min = tmp_freq; - if (policy->min > policy->max) + if (policy->min > policy->max) policy->max = tmp_freq; tmp_freq = gx_validate_speed(policy->max, &tmp1, &tmp2); if (tmp_freq > policy->max) @@ -358,12 +356,12 @@ static int cpufreq_gx_verify(struct cpufreq_policy *policy) if (policy->max < policy->min) policy->max = policy->min; cpufreq_verify_within_limits(policy, (stock_freq / max_duration), stock_freq); - + return 0; } /* - * cpufreq_gx_target: + * cpufreq_gx_target: * */ static int cpufreq_gx_target(struct cpufreq_policy *policy, @@ -373,8 +371,8 @@ static int cpufreq_gx_target(struct cpufreq_policy *policy, u8 tmp1, tmp2; unsigned int tmp_freq; - if (!stock_freq || !policy) - return -EINVAL; + if (!stock_freq || !policy) + return -EINVAL; policy->cpu = 0; @@ -431,7 +429,7 @@ static int cpufreq_gx_cpu_init(struct cpufreq_policy *policy) return 0; } -/* +/* * cpufreq_gx_init: * MediaGX/Geode GX initialize cpufreq driver */ @@ -452,7 +450,7 @@ static int __init cpufreq_gx_init(void) u32 class_rev; /* Test if we have the right hardware */ - if ((gx_pci = gx_detect_chipset()) == NULL) + if ((gx_pci = gx_detect_chipset()) == NULL) return -ENODEV; /* check whether module parameters are sane */ @@ -478,7 +476,7 @@ static int __init cpufreq_gx_init(void) pci_read_config_dword(params->cs55x0, PCI_CLASS_REVISION, &class_rev); params->pci_rev = class_rev && 0xff; - if ((ret = cpufreq_register_driver(&gx_suspmod_driver))) { + if ((ret = cpufreq_register_driver(&gx_suspmod_driver))) { kfree(params); return ret; /* register error! */ } diff --git a/arch/i386/kernel/cpu/cpufreq/longhaul.h b/arch/i386/kernel/cpu/cpufreq/longhaul.h index 2a495c162ec..d3a95d77ee8 100644 --- a/arch/i386/kernel/cpu/cpufreq/longhaul.h +++ b/arch/i386/kernel/cpu/cpufreq/longhaul.h @@ -234,7 +234,7 @@ static int __initdata ezrat_eblcr[32] = { /* * VIA C3 Nehemiah */ - + static int __initdata nehemiah_a_clock_ratio[32] = { 100, /* 0000 -> 10.0x */ 160, /* 0001 -> 16.0x */ @@ -446,7 +446,7 @@ static int __initdata nehemiah_c_eblcr[32] = { /* end of table */ }; -/* +/* * Voltage scales. Div/Mod by 1000 to get actual voltage. * Which scale to use depends on the VRM type in use. */ diff --git a/arch/i386/kernel/cpu/cpufreq/p4-clockmod.c b/arch/i386/kernel/cpu/cpufreq/p4-clockmod.c index cc73a7ae34b..0e1fc5c4524 100644 --- a/arch/i386/kernel/cpu/cpufreq/p4-clockmod.c +++ b/arch/i386/kernel/cpu/cpufreq/p4-clockmod.c @@ -14,7 +14,7 @@ * The author(s) of this software shall not be held liable for damages * of any nature resulting due to the use of this software. This * software is provided AS-IS with no warranties. - * + * * Date Errata Description * 20020525 N44, O17 12.5% or 25% DC causes lockup * @@ -22,7 +22,7 @@ #include <linux/config.h> #include <linux/kernel.h> -#include <linux/module.h> +#include <linux/module.h> #include <linux/init.h> #include <linux/smp.h> #include <linux/cpufreq.h> @@ -30,7 +30,7 @@ #include <linux/cpumask.h> #include <linux/sched.h> /* current / set_cpus_allowed() */ -#include <asm/processor.h> +#include <asm/processor.h> #include <asm/msr.h> #include <asm/timex.h> @@ -79,7 +79,7 @@ static int cpufreq_p4_setdc(unsigned int cpu, unsigned int newstate) } else { dprintk("CPU#%d setting duty cycle to %d%%\n", cpu, ((125 * newstate) / 10)); - /* bits 63 - 5 : reserved + /* bits 63 - 5 : reserved * bit 4 : enable/disable * bits 3-1 : duty cycle * bit 0 : reserved @@ -132,7 +132,7 @@ static int cpufreq_p4_target(struct cpufreq_policy *policy, } /* run on each logical CPU, see section 13.15.3 of IA32 Intel Architecture Software - * Developer's Manual, Volume 3 + * Developer's Manual, Volume 3 */ cpus_allowed = current->cpus_allowed; @@ -206,7 +206,7 @@ static unsigned int cpufreq_p4_get_frequency(struct cpuinfo_x86 *c) return speedstep_get_processor_frequency(SPEEDSTEP_PROCESSOR_P4D); } - + static int cpufreq_p4_cpu_init(struct cpufreq_policy *policy) { @@ -234,7 +234,7 @@ static int cpufreq_p4_cpu_init(struct cpufreq_policy *policy) dprintk("has errata -- disabling frequencies lower than 2ghz\n"); break; } - + /* get max frequency */ stock_freq = cpufreq_p4_get_frequency(c); if (!stock_freq) @@ -250,7 +250,7 @@ static int cpufreq_p4_cpu_init(struct cpufreq_policy *policy) p4clockmod_table[i].frequency = (stock_freq * i)/8; } cpufreq_frequency_table_get_attr(p4clockmod_table, policy->cpu); - + /* cpuinfo and default policy values */ policy->governor = CPUFREQ_DEFAULT_GOVERNOR; policy->cpuinfo.transition_latency = 1000000; /* assumed */ @@ -262,7 +262,7 @@ static int cpufreq_p4_cpu_init(struct cpufreq_policy *policy) static int cpufreq_p4_cpu_exit(struct cpufreq_policy *policy) { - cpufreq_frequency_table_put_attr(policy->cpu); + cpufreq_frequency_table_put_attr(policy->cpu); return 0; } @@ -298,7 +298,7 @@ static struct freq_attr* p4clockmod_attr[] = { }; static struct cpufreq_driver p4clockmod_driver = { - .verify = cpufreq_p4_verify, + .verify = cpufreq_p4_verify, .target = cpufreq_p4_target, .init = cpufreq_p4_cpu_init, .exit = cpufreq_p4_cpu_exit, @@ -310,12 +310,12 @@ static struct cpufreq_driver p4clockmod_driver = { static int __init cpufreq_p4_init(void) -{ +{ struct cpuinfo_x86 *c = cpu_data; int ret; /* - * THERM_CONTROL is architectural for IA32 now, so + * THERM_CONTROL is architectural for IA32 now, so * we can rely on the capability checks */ if (c->x86_vendor != X86_VENDOR_INTEL) diff --git a/arch/i386/kernel/cpu/cpufreq/powernow-k6.c b/arch/i386/kernel/cpu/cpufreq/powernow-k6.c index 222f8cfe3c5..f89524051e4 100644 --- a/arch/i386/kernel/cpu/cpufreq/powernow-k6.c +++ b/arch/i386/kernel/cpu/cpufreq/powernow-k6.c @@ -8,7 +8,7 @@ */ #include <linux/kernel.h> -#include <linux/module.h> +#include <linux/module.h> #include <linux/init.h> #include <linux/cpufreq.h> #include <linux/ioport.h> @@ -50,7 +50,7 @@ static int powernow_k6_get_cpu_multiplier(void) { u64 invalue = 0; u32 msrval; - + msrval = POWERNOW_IOPORT + 0x1; wrmsr(MSR_K6_EPMR, msrval, 0); /* enable the PowerNow port */ invalue=inl(POWERNOW_IOPORT + 0x8); @@ -81,7 +81,7 @@ static void powernow_k6_set_state (unsigned int best_i) freqs.old = busfreq * powernow_k6_get_cpu_multiplier(); freqs.new = busfreq * clock_ratio[best_i].index; freqs.cpu = 0; /* powernow-k6.c is UP only driver */ - + cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); /* we now need to transform best_i to the BVC format, see AMD#23446 */ @@ -152,7 +152,7 @@ static int powernow_k6_cpu_init(struct cpufreq_policy *policy) busfreq = cpu_khz / max_multiplier; /* table init */ - for (i=0; (clock_ratio[i].frequency != CPUFREQ_TABLE_END); i++) { + for (i=0; (clock_ratio[i].frequency != CPUFREQ_TABLE_END); i++) { if (clock_ratio[i].index > max_multiplier) clock_ratio[i].frequency = CPUFREQ_ENTRY_INVALID; else @@ -182,7 +182,7 @@ static int powernow_k6_cpu_exit(struct cpufreq_policy *policy) powernow_k6_set_state(i); } cpufreq_frequency_table_put_attr(policy->cpu); - return 0; + return 0; } static unsigned int powernow_k6_get(unsigned int cpu) @@ -196,8 +196,8 @@ static struct freq_attr* powernow_k6_attr[] = { }; static struct cpufreq_driver powernow_k6_driver = { - .verify = powernow_k6_verify, - .target = powernow_k6_target, + .verify = powernow_k6_verify, + .target = powernow_k6_target, .init = powernow_k6_cpu_init, .exit = powernow_k6_cpu_exit, .get = powernow_k6_get, @@ -215,7 +215,7 @@ static struct cpufreq_driver powernow_k6_driver = { * on success. */ static int __init powernow_k6_init(void) -{ +{ struct cpuinfo_x86 *c = cpu_data; if ((c->x86_vendor != X86_VENDOR_AMD) || (c->x86 != 5) || diff --git a/arch/i386/kernel/cpu/cpufreq/powernow-k7.c b/arch/i386/kernel/cpu/cpufreq/powernow-k7.c index edcd626001d..2bf4237cb94 100644 --- a/arch/i386/kernel/cpu/cpufreq/powernow-k7.c +++ b/arch/i386/kernel/cpu/cpufreq/powernow-k7.c @@ -199,8 +199,8 @@ static int get_ranges (unsigned char *pst) powernow_table[j].index |= (vid << 8); /* upper 8 bits */ dprintk (" FID: 0x%x (%d.%dx [%dMHz]) " - "VID: 0x%x (%d.%03dV)\n", fid, fid_codes[fid] / 10, - fid_codes[fid] % 10, speed/1000, vid, + "VID: 0x%x (%d.%03dV)\n", fid, fid_codes[fid] / 10, + fid_codes[fid] % 10, speed/1000, vid, mobile_vid_table[vid]/1000, mobile_vid_table[vid]%1000); } @@ -368,8 +368,8 @@ static int powernow_acpi_init(void) } dprintk (" FID: 0x%x (%d.%dx [%dMHz]) " - "VID: 0x%x (%d.%03dV)\n", fid, fid_codes[fid] / 10, - fid_codes[fid] % 10, speed/1000, vid, + "VID: 0x%x (%d.%03dV)\n", fid, fid_codes[fid] / 10, + fid_codes[fid] % 10, speed/1000, vid, mobile_vid_table[vid]/1000, mobile_vid_table[vid]%1000); @@ -460,7 +460,7 @@ static int powernow_decode_bios (int maxfid, int startvid) (maxfid==pst->maxfid) && (startvid==pst->startvid)) { dprintk ("PST:%d (@%p)\n", i, pst); - dprintk (" cpuid: 0x%x fsb: %d maxFID: 0x%x startvid: 0x%x\n", + dprintk (" cpuid: 0x%x fsb: %d maxFID: 0x%x startvid: 0x%x\n", pst->cpuid, pst->fsbspeed, pst->maxfid, pst->startvid); ret = get_ranges ((char *) pst + sizeof (struct pst_s)); diff --git a/arch/i386/kernel/cpu/cpufreq/powernow-k8.c b/arch/i386/kernel/cpu/cpufreq/powernow-k8.c index 3b3a94987d1..e85e90524df 100644 --- a/arch/i386/kernel/cpu/cpufreq/powernow-k8.c +++ b/arch/i386/kernel/cpu/cpufreq/powernow-k8.c @@ -83,11 +83,10 @@ static u32 find_millivolts_from_vid(struct powernow_k8_data *data, u32 vid) */ static u32 convert_fid_to_vco_fid(u32 fid) { - if (fid < HI_FID_TABLE_BOTTOM) { + if (fid < HI_FID_TABLE_BOTTOM) return 8 + (2 * fid); - } else { + else return fid; - } } /* @@ -177,7 +176,7 @@ static int write_new_fid(struct powernow_k8_data *data, u32 fid) if (i++ > 100) { printk(KERN_ERR PFX "internal error - pending bit very stuck - no further pstate changes possible\n"); return 1; - } + } } while (query_current_values_with_pending_wait(data)); count_off_irt(data); @@ -782,9 +781,7 @@ static int powernow_k8_cpu_init_acpi(struct powernow_k8_data *data) /* verify only 1 entry from the lo frequency table */ if (fid < HI_FID_TABLE_BOTTOM) { if (cntlofreq) { - /* if both entries are the same, ignore this - * one... - */ + /* if both entries are the same, ignore this one ... */ if ((powernow_table[i].frequency != powernow_table[cntlofreq].frequency) || (powernow_table[i].index != powernow_table[cntlofreq].index)) { printk(KERN_ERR PFX "Too many lo freq table entries\n"); @@ -856,7 +853,7 @@ static int transition_frequency(struct powernow_k8_data *data, unsigned int inde dprintk("cpu %d transition to index %u\n", smp_processor_id(), index); /* fid are the lower 8 bits of the index we stored into - * the cpufreq frequency table in find_psb_table, vid are + * the cpufreq frequency table in find_psb_table, vid are * the upper 8 bits. */ @@ -1050,7 +1047,7 @@ static int __cpuinit powernowk8_cpu_init(struct cpufreq_policy *pol) pol->governor = CPUFREQ_DEFAULT_GOVERNOR; pol->cpus = cpu_core_map[pol->cpu]; - /* Take a crude guess here. + /* Take a crude guess here. * That guess was in microseconds, so multiply with 1000 */ pol->cpuinfo.transition_latency = (((data->rvo + 8) * data->vstable * VST_UNITS_20US) + (3 * (1 << data->irt) * 10)) * 1000; diff --git a/arch/i386/kernel/cpu/cpufreq/powernow-k8.h b/arch/i386/kernel/cpu/cpufreq/powernow-k8.h index d0de37d58e9..00ea899c17e 100644 --- a/arch/i386/kernel/cpu/cpufreq/powernow-k8.h +++ b/arch/i386/kernel/cpu/cpufreq/powernow-k8.h @@ -63,7 +63,7 @@ struct powernow_k8_data { #define MSR_C_LO_VID_SHIFT 8 /* Field definitions within the FID VID High Control MSR : */ -#define MSR_C_HI_STP_GNT_TO 0x000fffff +#define MSR_C_HI_STP_GNT_TO 0x000fffff /* Field definitions within the FID VID Low Status MSR : */ #define MSR_S_LO_CHANGE_PENDING 0x80000000 /* cleared when completed */ @@ -123,7 +123,7 @@ struct powernow_k8_data { * Most values of interest are enocoded in a single field of the _PSS * entries: the "control" value. */ - + #define IRT_SHIFT 30 #define RVO_SHIFT 28 #define EXT_TYPE_SHIFT 27 @@ -185,7 +185,7 @@ static void powernow_k8_acpi_pst_values(struct powernow_k8_data *data, unsigned #ifndef for_each_cpu_mask #define for_each_cpu_mask(i,mask) for (i=0;i<1;i++) #endif - + #ifdef CONFIG_SMP static inline void define_siblings(int cpu, cpumask_t cpu_sharedcore_mask[]) { diff --git a/arch/i386/kernel/cpu/cpufreq/speedstep-lib.c b/arch/i386/kernel/cpu/cpufreq/speedstep-lib.c index 7c47005a180..4f46cac155c 100644 --- a/arch/i386/kernel/cpu/cpufreq/speedstep-lib.c +++ b/arch/i386/kernel/cpu/cpufreq/speedstep-lib.c @@ -9,7 +9,7 @@ */ #include <linux/kernel.h> -#include <linux/module.h> +#include <linux/module.h> #include <linux/moduleparam.h> #include <linux/init.h> #include <linux/cpufreq.h> @@ -36,8 +36,8 @@ static unsigned int pentium3_get_frequency (unsigned int processor) /* See table 14 of p3_ds.pdf and table 22 of 29834003.pdf */ struct { unsigned int ratio; /* Frequency Multiplier (x10) */ - u8 bitmap; /* power on configuration bits - [27, 25:22] (in MSR 0x2a) */ + u8 bitmap; /* power on configuration bits + [27, 25:22] (in MSR 0x2a) */ } msr_decode_mult [] = { { 30, 0x01 }, { 35, 0x05 }, @@ -58,9 +58,9 @@ static unsigned int pentium3_get_frequency (unsigned int processor) /* PIII(-M) FSB settings: see table b1-b of 24547206.pdf */ struct { - unsigned int value; /* Front Side Bus speed in MHz */ - u8 bitmap; /* power on configuration bits [18: 19] - (in MSR 0x2a) */ + unsigned int value; /* Front Side Bus speed in MHz */ + u8 bitmap; /* power on configuration bits [18: 19] + (in MSR 0x2a) */ } msr_decode_fsb [] = { { 66, 0x0 }, { 100, 0x2 }, @@ -68,8 +68,8 @@ static unsigned int pentium3_get_frequency (unsigned int processor) { 0, 0xff} }; - u32 msr_lo, msr_tmp; - int i = 0, j = 0; + u32 msr_lo, msr_tmp; + int i = 0, j = 0; /* read MSR 0x2a - we only need the low 32 bits */ rdmsr(MSR_IA32_EBL_CR_POWERON, msr_lo, msr_tmp); @@ -106,7 +106,7 @@ static unsigned int pentium3_get_frequency (unsigned int processor) static unsigned int pentiumM_get_frequency(void) { - u32 msr_lo, msr_tmp; + u32 msr_lo, msr_tmp; rdmsr(MSR_IA32_EBL_CR_POWERON, msr_lo, msr_tmp); dprintk("PM - MSR_IA32_EBL_CR_POWERON: 0x%x 0x%x\n", msr_lo, msr_tmp); @@ -134,7 +134,7 @@ static unsigned int pentium4_get_frequency(void) dprintk("P4 - MSR_EBC_FREQUENCY_ID: 0x%x 0x%x\n", msr_lo, msr_hi); - /* decode the FSB: see IA-32 Intel (C) Architecture Software + /* decode the FSB: see IA-32 Intel (C) Architecture Software * Developer's Manual, Volume 3: System Prgramming Guide, * revision #12 in Table B-1: MSRs in the Pentium 4 and * Intel Xeon Processors, on page B-4 and B-5. @@ -170,7 +170,7 @@ static unsigned int pentium4_get_frequency(void) return (fsb * mult); } - + unsigned int speedstep_get_processor_frequency(unsigned int processor) { switch (processor) { @@ -198,11 +198,11 @@ EXPORT_SYMBOL_GPL(speedstep_get_processor_frequency); unsigned int speedstep_detect_processor (void) { struct cpuinfo_x86 *c = cpu_data; - u32 ebx, msr_lo, msr_hi; + u32 ebx, msr_lo, msr_hi; dprintk("x86: %x, model: %x\n", c->x86, c->x86_model); - if ((c->x86_vendor != X86_VENDOR_INTEL) || + if ((c->x86_vendor != X86_VENDOR_INTEL) || ((c->x86 != 6) && (c->x86 != 0xF))) return 0; @@ -218,15 +218,15 @@ unsigned int speedstep_detect_processor (void) dprintk("ebx value is %x, x86_mask is %x\n", ebx, c->x86_mask); switch (c->x86_mask) { - case 4: + case 4: /* - * B-stepping [M-P4-M] + * B-stepping [M-P4-M] * sample has ebx = 0x0f, production has 0x0e. */ if ((ebx == 0x0e) || (ebx == 0x0f)) return SPEEDSTEP_PROCESSOR_P4M; break; - case 7: + case 7: /* * C-stepping [M-P4-M] * needs to have ebx=0x0e, else it's a celeron: @@ -253,7 +253,7 @@ unsigned int speedstep_detect_processor (void) * also, M-P4M HTs have ebx=0x8, too * For now, they are distinguished by the model_id string */ - if ((ebx == 0x0e) || (strstr(c->x86_model_id,"Mobile Intel(R) Pentium(R) 4") != NULL)) + if ((ebx == 0x0e) || (strstr(c->x86_model_id,"Mobile Intel(R) Pentium(R) 4") != NULL)) return SPEEDSTEP_PROCESSOR_P4M; break; default: @@ -264,8 +264,7 @@ unsigned int speedstep_detect_processor (void) switch (c->x86_model) { case 0x0B: /* Intel PIII [Tualatin] */ - /* cpuid_ebx(1) is 0x04 for desktop PIII, - 0x06 for mobile PIII-M */ + /* cpuid_ebx(1) is 0x04 for desktop PIII, 0x06 for mobile PIII-M */ ebx = cpuid_ebx(0x00000001); dprintk("ebx is %x\n", ebx); @@ -275,9 +274,8 @@ unsigned int speedstep_detect_processor (void) return 0; /* So far all PIII-M processors support SpeedStep. See - * Intel's 24540640.pdf of June 2003 + * Intel's 24540640.pdf of June 2003 */ - return SPEEDSTEP_PROCESSOR_PIII_T; case 0x08: /* Intel PIII [Coppermine] */ @@ -399,7 +397,7 @@ unsigned int speedstep_get_freqs(unsigned int processor, } } - out: +out: local_irq_restore(flags); return (ret); } diff --git a/arch/i386/kernel/cpu/cpufreq/speedstep-lib.h b/arch/i386/kernel/cpu/cpufreq/speedstep-lib.h index 6a727fd3a77..b735429c50b 100644 --- a/arch/i386/kernel/cpu/cpufreq/speedstep-lib.h +++ b/arch/i386/kernel/cpu/cpufreq/speedstep-lib.h @@ -14,7 +14,7 @@ #define SPEEDSTEP_PROCESSOR_PIII_C_EARLY 0x00000001 /* Coppermine core */ #define SPEEDSTEP_PROCESSOR_PIII_C 0x00000002 /* Coppermine core */ -#define SPEEDSTEP_PROCESSOR_PIII_T 0x00000003 /* Tualatin core */ +#define SPEEDSTEP_PROCESSOR_PIII_T 0x00000003 /* Tualatin core */ #define SPEEDSTEP_PROCESSOR_P4M 0x00000004 /* P4-M */ /* the following processors are not speedstep-capable and are not auto-detected @@ -25,8 +25,8 @@ /* speedstep states -- only two of them */ -#define SPEEDSTEP_HIGH 0x00000000 -#define SPEEDSTEP_LOW 0x00000001 +#define SPEEDSTEP_HIGH 0x00000000 +#define SPEEDSTEP_LOW 0x00000001 /* detect a speedstep-capable processor */ @@ -36,13 +36,13 @@ extern unsigned int speedstep_detect_processor (void); extern unsigned int speedstep_get_processor_frequency(unsigned int processor); -/* detect the low and high speeds of the processor. The callback - * set_state"'s first argument is either SPEEDSTEP_HIGH or - * SPEEDSTEP_LOW; the second argument is zero so that no +/* detect the low and high speeds of the processor. The callback + * set_state"'s first argument is either SPEEDSTEP_HIGH or + * SPEEDSTEP_LOW; the second argument is zero so that no * cpufreq_notify_transition calls are initiated. */ extern unsigned int speedstep_get_freqs(unsigned int processor, - unsigned int *low_speed, - unsigned int *high_speed, - unsigned int *transition_latency, - void (*set_state) (unsigned int state)); + unsigned int *low_speed, + unsigned int *high_speed, + unsigned int *transition_latency, + void (*set_state) (unsigned int state)); diff --git a/arch/i386/kernel/cpu/cpufreq/speedstep-smi.c b/arch/i386/kernel/cpu/cpufreq/speedstep-smi.c index 28cc5d524af..336ba49e526 100644 --- a/arch/i386/kernel/cpu/cpufreq/speedstep-smi.c +++ b/arch/i386/kernel/cpu/cpufreq/speedstep-smi.c @@ -13,8 +13,8 @@ *********************************************************************/ #include <linux/kernel.h> -#include <linux/module.h> -#include <linux/moduleparam.h> +#include <linux/module.h> +#include <linux/moduleparam.h> #include <linux/init.h> #include <linux/cpufreq.h> #include <linux/pci.h> @@ -28,21 +28,21 @@ * * These parameters are got from IST-SMI BIOS call. * If user gives it, these are used. - * + * */ -static int smi_port = 0; -static int smi_cmd = 0; -static unsigned int smi_sig = 0; +static int smi_port = 0; +static int smi_cmd = 0; +static unsigned int smi_sig = 0; /* info about the processor */ -static unsigned int speedstep_processor = 0; +static unsigned int speedstep_processor = 0; -/* - * There are only two frequency states for each processor. Values +/* + * There are only two frequency states for each processor. Values * are in kHz for the time being. */ static struct cpufreq_frequency_table speedstep_freqs[] = { - {SPEEDSTEP_HIGH, 0}, + {SPEEDSTEP_HIGH, 0}, {SPEEDSTEP_LOW, 0}, {0, CPUFREQ_TABLE_END}, }; @@ -123,7 +123,7 @@ static int speedstep_smi_get_freqs (unsigned int *low, unsigned int *high) *low = low_mhz * 1000; return result; -} +} /** * speedstep_get_state - set the SpeedStep state @@ -204,7 +204,7 @@ static void speedstep_set_state (unsigned int state) * speedstep_target - set a new CPUFreq policy * @policy: new policy * @target_freq: new freq - * @relation: + * @relation: * * Sets a new CPUFreq policy/freq. */ @@ -283,7 +283,7 @@ static int speedstep_cpu_init(struct cpufreq_policy *policy) state = speedstep_get_state(); speed = speedstep_freqs[state].frequency; - dprintk("currently at %s speed setting - %i MHz\n", + dprintk("currently at %s speed setting - %i MHz\n", (speed == speedstep_freqs[SPEEDSTEP_LOW].frequency) ? "low" : "high", (speed / 1000)); @@ -296,7 +296,7 @@ static int speedstep_cpu_init(struct cpufreq_policy *policy) if (result) return (result); - cpufreq_frequency_table_get_attr(speedstep_freqs, policy->cpu); + cpufreq_frequency_table_get_attr(speedstep_freqs, policy->cpu); return 0; } @@ -332,8 +332,8 @@ static struct freq_attr* speedstep_attr[] = { static struct cpufreq_driver speedstep_driver = { .name = "speedstep-smi", - .verify = speedstep_verify, - .target = speedstep_target, + .verify = speedstep_verify, + .target = speedstep_target, .init = speedstep_cpu_init, .exit = speedstep_cpu_exit, .get = speedstep_get, @@ -370,13 +370,12 @@ static int __init speedstep_init(void) return -ENODEV; } - dprintk("signature:0x%.8lx, command:0x%.8lx, event:0x%.8lx, perf_level:0x%.8lx.\n", + dprintk("signature:0x%.8lx, command:0x%.8lx, event:0x%.8lx, perf_level:0x%.8lx.\n", ist_info.signature, ist_info.command, ist_info.event, ist_info.perf_level); - - /* Error if no IST-SMI BIOS or no PARM + /* Error if no IST-SMI BIOS or no PARM sig= 'ISGE' aka 'Intel Speedstep Gate E' */ - if ((ist_info.signature != 0x47534943) && ( + if ((ist_info.signature != 0x47534943) && ( (smi_port == 0) || (smi_cmd == 0))) return -ENODEV; @@ -386,17 +385,15 @@ static int __init speedstep_init(void) smi_sig = ist_info.signature; /* setup smi_port from MODLULE_PARM or BIOS */ - if ((smi_port > 0xff) || (smi_port < 0)) { + if ((smi_port > 0xff) || (smi_port < 0)) return -EINVAL; - } else if (smi_port == 0) { + else if (smi_port == 0) smi_port = ist_info.command & 0xff; - } - if ((smi_cmd > 0xff) || (smi_cmd < 0)) { + if ((smi_cmd > 0xff) || (smi_cmd < 0)) return -EINVAL; - } else if (smi_cmd == 0) { + else if (smi_cmd == 0) smi_cmd = (ist_info.command >> 16) & 0xff; - } return cpufreq_register_driver(&speedstep_driver); } diff --git a/drivers/cpufreq/cpufreq.c b/drivers/cpufreq/cpufreq.c index 9582de1c9ca..cb7d6e0db75 100644 --- a/drivers/cpufreq/cpufreq.c +++ b/drivers/cpufreq/cpufreq.c @@ -5,7 +5,7 @@ * (C) 2002 - 2003 Dominik Brodowski <linux@brodo.de> * * Oct 2005 - Ashok Raj <ashok.raj@intel.com> - * Added handling for CPU hotplug + * Added handling for CPU hotplug * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -44,8 +44,8 @@ static int __cpufreq_governor(struct cpufreq_policy *policy, unsigned int event) static void handle_update(void *data); /** - * Two notifier lists: the "policy" list is involved in the - * validation process for a new CPU frequency policy; the + * Two notifier lists: the "policy" list is involved in the + * validation process for a new CPU frequency policy; the * "transition" list for kernel code that needs to handle * changes to devices when the CPU clock speed changes. * The mutex locks both lists. @@ -151,7 +151,7 @@ void cpufreq_debug_printk(unsigned int type, const char *prefix, const char *fmt va_list args; unsigned int len; unsigned long flags; - + WARN_ON(!prefix); if (type & debug) { spin_lock_irqsave(&disable_ratelimit_lock, flags); @@ -198,7 +198,7 @@ static inline void cpufreq_debug_disable_ratelimit(void) { return; } * * This function alters the system "loops_per_jiffy" for the clock * speed change. Note that loops_per_jiffy cannot be updated on SMP - * systems as each CPU might be scaled differently. So, use the arch + * systems as each CPU might be scaled differently. So, use the arch * per-CPU loops_per_jiffy value wherever possible. */ #ifndef CONFIG_SMP @@ -233,7 +233,7 @@ static inline void adjust_jiffies(unsigned long val, struct cpufreq_freqs *ci) { * * This function calls the transition notifiers and the "adjust_jiffies" * function. It is called twice on all CPU frequency changes that have - * external effects. + * external effects. */ void cpufreq_notify_transition(struct cpufreq_freqs *freqs, unsigned int state) { @@ -251,7 +251,7 @@ void cpufreq_notify_transition(struct cpufreq_freqs *freqs, unsigned int state) switch (state) { case CPUFREQ_PRECHANGE: - /* detect if the driver reported a value as "old frequency" + /* detect if the driver reported a value as "old frequency" * which is not equal to what the cpufreq core thinks is * "old frequency". */ @@ -335,11 +335,11 @@ extern struct sysdev_class cpu_sysdev_class; * "unsigned int". */ -#define show_one(file_name, object) \ -static ssize_t show_##file_name \ -(struct cpufreq_policy * policy, char *buf) \ -{ \ - return sprintf (buf, "%u\n", policy->object); \ +#define show_one(file_name, object) \ +static ssize_t show_##file_name \ +(struct cpufreq_policy * policy, char *buf) \ +{ \ + return sprintf (buf, "%u\n", policy->object); \ } show_one(cpuinfo_min_freq, cpuinfo.min_freq); @@ -404,8 +404,8 @@ static ssize_t show_scaling_governor (struct cpufreq_policy * policy, char *buf) /** * store_scaling_governor - store policy for the specified CPU */ -static ssize_t store_scaling_governor (struct cpufreq_policy * policy, - const char *buf, size_t count) +static ssize_t store_scaling_governor (struct cpufreq_policy * policy, + const char *buf, size_t count) { unsigned int ret = -EINVAL; char str_governor[16]; @@ -528,7 +528,7 @@ static ssize_t show(struct kobject * kobj, struct attribute * attr ,char * buf) return ret; } -static ssize_t store(struct kobject * kobj, struct attribute * attr, +static ssize_t store(struct kobject * kobj, struct attribute * attr, const char * buf, size_t count) { struct cpufreq_policy * policy = to_policy(kobj); @@ -564,7 +564,7 @@ static struct kobj_type ktype_cpufreq = { /** * cpufreq_add_dev - add a CPU device * - * Adds the cpufreq interface for a CPU device. + * Adds the cpufreq interface for a CPU device. */ static int cpufreq_add_dev (struct sys_device * sys_dev) { @@ -724,7 +724,7 @@ static int cpufreq_remove_dev (struct sys_device * sys_dev) #ifdef CONFIG_SMP /* if this isn't the CPU which is the parent of the kobj, we - * only need to unlink, put and exit + * only need to unlink, put and exit */ if (unlikely(cpu != data->cpu)) { dprintk("removing link\n"); @@ -740,7 +740,7 @@ static int cpufreq_remove_dev (struct sys_device * sys_dev) if (!kobject_get(&data->kobj)) { spin_unlock_irqrestore(&cpufreq_driver_lock, flags); cpufreq_debug_enable_ratelimit(); - return -EFAULT; + return -EFAULT; } #ifdef CONFIG_SMP @@ -783,7 +783,7 @@ static int cpufreq_remove_dev (struct sys_device * sys_dev) kobject_put(&data->kobj); /* we need to make sure that the underlying kobj is actually - * not referenced anymore by anybody before we proceed with + * not referenced anymore by anybody before we proceed with * unloading. */ dprintk("waiting for dropping of refcount\n"); @@ -831,7 +831,7 @@ static void cpufreq_out_of_sync(unsigned int cpu, unsigned int old_freq, unsigne } -/** +/** * cpufreq_quick_get - get the CPU frequency (in kHz) frpm policy->cur * @cpu: CPU number * @@ -855,7 +855,7 @@ unsigned int cpufreq_quick_get(unsigned int cpu) EXPORT_SYMBOL(cpufreq_quick_get); -/** +/** * cpufreq_get - get the current CPU frequency (in kHz) * @cpu: CPU number * @@ -1072,7 +1072,7 @@ static struct sysdev_driver cpufreq_sysdev_driver = { * @nb: notifier function to register * @list: CPUFREQ_TRANSITION_NOTIFIER or CPUFREQ_POLICY_NOTIFIER * - * Add a driver to one of two lists: either a list of drivers that + * Add a driver to one of two lists: either a list of drivers that * are notified about clock rate changes (once before and once after * the transition), or a list of drivers that are notified about * changes in cpufreq policy. @@ -1225,7 +1225,7 @@ int cpufreq_register_governor(struct cpufreq_governor *governor) return -EINVAL; mutex_lock(&cpufreq_governor_mutex); - + list_for_each_entry(t, &cpufreq_governor_list, governor_list) { if (!strnicmp(governor->name,t->name,CPUFREQ_NAME_LEN)) { mutex_unlock(&cpufreq_governor_mutex); @@ -1234,7 +1234,7 @@ int cpufreq_register_governor(struct cpufreq_governor *governor) } list_add(&governor->governor_list, &cpufreq_governor_list); - mutex_unlock(&cpufreq_governor_mutex); + mutex_unlock(&cpufreq_governor_mutex); return 0; } EXPORT_SYMBOL_GPL(cpufreq_register_governor); @@ -1497,9 +1497,9 @@ static struct notifier_block cpufreq_cpu_notifier = * @driver_data: A struct cpufreq_driver containing the values# * submitted by the CPU Frequency driver. * - * Registers a CPU Frequency driver to this core code. This code + * Registers a CPU Frequency driver to this core code. This code * returns zero on success, -EBUSY when another driver got here first - * (and isn't unregistered in the meantime). + * (and isn't unregistered in the meantime). * */ int cpufreq_register_driver(struct cpufreq_driver *driver_data) @@ -1560,7 +1560,7 @@ EXPORT_SYMBOL_GPL(cpufreq_register_driver); /** * cpufreq_unregister_driver - unregister the current CPUFreq driver * - * Unregister the current CPUFreq driver. Only call this if you have + * Unregister the current CPUFreq driver. Only call this if you have * the right to do so, i.e. if you have succeeded in initialising before! * Returns zero if successful, and -EINVAL if the cpufreq_driver is * currently not initialised. diff --git a/drivers/cpufreq/cpufreq_ondemand.c b/drivers/cpufreq/cpufreq_ondemand.c index 9ee9411f186..69aa1db8336 100644 --- a/drivers/cpufreq/cpufreq_ondemand.c +++ b/drivers/cpufreq/cpufreq_ondemand.c @@ -38,17 +38,17 @@ #define MIN_FREQUENCY_UP_THRESHOLD (11) #define MAX_FREQUENCY_UP_THRESHOLD (100) -/* - * The polling frequency of this governor depends on the capability of +/* + * The polling frequency of this governor depends on the capability of * the processor. Default polling frequency is 1000 times the transition - * latency of the processor. The governor will work on any processor with - * transition latency <= 10mS, using appropriate sampling + * latency of the processor. The governor will work on any processor with + * transition latency <= 10mS, using appropriate sampling * rate. * For CPUs with transition latency > 10mS (mostly drivers with CPUFREQ_ETERNAL) * this governor will not work. * All times here are in uS. */ -static unsigned int def_sampling_rate; +static unsigned int def_sampling_rate; #define MIN_SAMPLING_RATE_RATIO (2) /* for correct statistics, we need at least 10 ticks between each measure */ #define MIN_STAT_SAMPLING_RATE (MIN_SAMPLING_RATE_RATIO * jiffies_to_usecs(10)) @@ -62,28 +62,28 @@ static unsigned int def_sampling_rate; static void do_dbs_timer(void *data); struct cpu_dbs_info_s { - struct cpufreq_policy *cur_policy; - unsigned int prev_cpu_idle_up; - unsigned int prev_cpu_idle_down; - unsigned int enable; + struct cpufreq_policy *cur_policy; + unsigned int prev_cpu_idle_up; + unsigned int prev_cpu_idle_down; + unsigned int enable; }; static DEFINE_PER_CPU(struct cpu_dbs_info_s, cpu_dbs_info); static unsigned int dbs_enable; /* number of CPUs using this policy */ -static DEFINE_MUTEX (dbs_mutex); +static DEFINE_MUTEX (dbs_mutex); static DECLARE_WORK (dbs_work, do_dbs_timer, NULL); struct dbs_tuners { - unsigned int sampling_rate; - unsigned int sampling_down_factor; - unsigned int up_threshold; - unsigned int ignore_nice; + unsigned int sampling_rate; + unsigned int sampling_down_factor; + unsigned int up_threshold; + unsigned int ignore_nice; }; static struct dbs_tuners dbs_tuners_ins = { - .up_threshold = DEF_FREQUENCY_UP_THRESHOLD, - .sampling_down_factor = DEF_SAMPLING_DOWN_FACTOR, + .up_threshold = DEF_FREQUENCY_UP_THRESHOLD, + .sampling_down_factor = DEF_SAMPLING_DOWN_FACTOR, }; static inline unsigned int get_cpu_idle_time(unsigned int cpu) @@ -106,8 +106,8 @@ static ssize_t show_sampling_rate_min(struct cpufreq_policy *policy, char *buf) return sprintf (buf, "%u\n", MIN_SAMPLING_RATE); } -#define define_one_ro(_name) \ -static struct freq_attr _name = \ +#define define_one_ro(_name) \ +static struct freq_attr _name = \ __ATTR(_name, 0444, show_##_name, NULL) define_one_ro(sampling_rate_max); @@ -125,7 +125,7 @@ show_one(sampling_down_factor, sampling_down_factor); show_one(up_threshold, up_threshold); show_one(ignore_nice_load, ignore_nice); -static ssize_t store_sampling_down_factor(struct cpufreq_policy *unused, +static ssize_t store_sampling_down_factor(struct cpufreq_policy *unused, const char *buf, size_t count) { unsigned int input; @@ -144,7 +144,7 @@ static ssize_t store_sampling_down_factor(struct cpufreq_policy *unused, return count; } -static ssize_t store_sampling_rate(struct cpufreq_policy *unused, +static ssize_t store_sampling_rate(struct cpufreq_policy *unused, const char *buf, size_t count) { unsigned int input; @@ -163,7 +163,7 @@ static ssize_t store_sampling_rate(struct cpufreq_policy *unused, return count; } -static ssize_t store_up_threshold(struct cpufreq_policy *unused, +static ssize_t store_up_threshold(struct cpufreq_policy *unused, const char *buf, size_t count) { unsigned int input; @@ -171,7 +171,7 @@ static ssize_t store_up_threshold(struct cpufreq_policy *unused, ret = sscanf (buf, "%u", &input); mutex_lock(&dbs_mutex); - if (ret != 1 || input > MAX_FREQUENCY_UP_THRESHOLD || + if (ret != 1 || input > MAX_FREQUENCY_UP_THRESHOLD || input < MIN_FREQUENCY_UP_THRESHOLD) { mutex_unlock(&dbs_mutex); return -EINVAL; @@ -190,14 +190,14 @@ static ssize_t store_ignore_nice_load(struct cpufreq_policy *policy, int ret; unsigned int j; - + ret = sscanf (buf, "%u", &input); if ( ret != 1 ) return -EINVAL; if ( input > 1 ) input = 1; - + mutex_lock(&dbs_mutex); if ( input == dbs_tuners_ins.ignore_nice ) { /* nothing to do */ mutex_unlock(&dbs_mutex); @@ -259,16 +259,16 @@ static void dbs_check_cpu(int cpu) return; policy = this_dbs_info->cur_policy; - /* + /* * Every sampling_rate, we check, if current idle time is less * than 20% (default), then we try to increase frequency * Every sampling_rate*sampling_down_factor, we look for a the lowest * frequency which can sustain the load while keeping idle time over * 30%. If such a frequency exist, we try to decrease to this frequency. * - * Any frequency increase takes it to the maximum frequency. - * Frequency reduction happens at minimum steps of - * 5% (default) of current frequency + * Any frequency increase takes it to the maximum frequency. + * Frequency reduction happens at minimum steps of + * 5% (default) of current frequency */ /* Check for frequency increase */ @@ -298,14 +298,14 @@ static void dbs_check_cpu(int cpu) struct cpu_dbs_info_s *j_dbs_info; j_dbs_info = &per_cpu(cpu_dbs_info, j); - j_dbs_info->prev_cpu_idle_down = + j_dbs_info->prev_cpu_idle_down = j_dbs_info->prev_cpu_idle_up; } /* if we are already at full speed then break out early */ if (policy->cur == policy->max) return; - - __cpufreq_driver_target(policy, policy->max, + + __cpufreq_driver_target(policy, policy->max, CPUFREQ_RELATION_H); return; } @@ -347,7 +347,7 @@ static void dbs_check_cpu(int cpu) * policy. To be safe, we focus 10 points under the threshold. */ freq_next = ((total_ticks - idle_ticks) * 100) / total_ticks; - freq_next = (freq_next * policy->cur) / + freq_next = (freq_next * policy->cur) / (dbs_tuners_ins.up_threshold - 10); if (freq_next <= ((policy->cur * 95) / 100)) @@ -355,15 +355,15 @@ static void dbs_check_cpu(int cpu) } static void do_dbs_timer(void *data) -{ +{ int i; mutex_lock(&dbs_mutex); for_each_online_cpu(i) dbs_check_cpu(i); - schedule_delayed_work(&dbs_work, + schedule_delayed_work(&dbs_work, usecs_to_jiffies(dbs_tuners_ins.sampling_rate)); mutex_unlock(&dbs_mutex); -} +} static inline void dbs_timer_init(void) { @@ -390,7 +390,7 @@ static int cpufreq_governor_dbs(struct cpufreq_policy *policy, switch (event) { case CPUFREQ_GOV_START: - if ((!cpu_online(cpu)) || + if ((!cpu_online(cpu)) || (!policy->cur)) return -EINVAL; @@ -399,13 +399,13 @@ static int cpufreq_governor_dbs(struct cpufreq_policy *policy, return -EINVAL; if (this_dbs_info->enable) /* Already enabled */ break; - + mutex_lock(&dbs_mutex); for_each_cpu_mask(j, policy->cpus) { struct cpu_dbs_info_s *j_dbs_info; j_dbs_info = &per_cpu(cpu_dbs_info, j); j_dbs_info->cur_policy = policy; - + j_dbs_info->prev_cpu_idle_up = get_cpu_idle_time(j); j_dbs_info->prev_cpu_idle_down = j_dbs_info->prev_cpu_idle_up; @@ -435,7 +435,7 @@ static int cpufreq_governor_dbs(struct cpufreq_policy *policy, dbs_timer_init(); } - + mutex_unlock(&dbs_mutex); break; @@ -448,9 +448,9 @@ static int cpufreq_governor_dbs(struct cpufreq_policy *policy, * Stop the timerschedule work, when this governor * is used for first time */ - if (dbs_enable == 0) + if (dbs_enable == 0) dbs_timer_exit(); - + mutex_unlock(&dbs_mutex); break; @@ -460,11 +460,11 @@ static int cpufreq_governor_dbs(struct cpufreq_policy *policy, if (policy->max < this_dbs_info->cur_policy->cur) __cpufreq_driver_target( this_dbs_info->cur_policy, - policy->max, CPUFREQ_RELATION_H); + policy->max, CPUFREQ_RELATION_H); else if (policy->min > this_dbs_info->cur_policy->cur) __cpufreq_driver_target( this_dbs_info->cur_policy, - policy->min, CPUFREQ_RELATION_L); + policy->min, CPUFREQ_RELATION_L); mutex_unlock(&dbs_mutex); break; } diff --git a/drivers/cpufreq/cpufreq_performance.c b/drivers/cpufreq/cpufreq_performance.c index 8d536b40deb..de91e3371ef 100644 --- a/drivers/cpufreq/cpufreq_performance.c +++ b/drivers/cpufreq/cpufreq_performance.c @@ -32,7 +32,7 @@ static int cpufreq_governor_performance(struct cpufreq_policy *policy, } return 0; } - + struct cpufreq_governor cpufreq_gov_performance = { .name = "performance", .governor = cpufreq_governor_performance, diff --git a/drivers/cpufreq/cpufreq_powersave.c b/drivers/cpufreq/cpufreq_powersave.c index c85edda7feb..0a2596044e6 100644 --- a/drivers/cpufreq/cpufreq_powersave.c +++ b/drivers/cpufreq/cpufreq_powersave.c @@ -31,7 +31,7 @@ static int cpufreq_governor_powersave(struct cpufreq_policy *policy, } return 0; } - + static struct cpufreq_governor cpufreq_gov_powersave = { .name = "powersave", .governor = cpufreq_governor_powersave, diff --git a/drivers/cpufreq/cpufreq_stats.c b/drivers/cpufreq/cpufreq_stats.c index 0bddb8e694d..c25bdb7aec5 100644 --- a/drivers/cpufreq/cpufreq_stats.c +++ b/drivers/cpufreq/cpufreq_stats.c @@ -2,7 +2,7 @@ * drivers/cpufreq/cpufreq_stats.c * * Copyright (C) 2003-2004 Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>. - * (C) 2004 Zou Nan hai <nanhai.zou@intel.com>. + * (C) 2004 Zou Nan hai <nanhai.zou@intel.com>. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -90,7 +90,7 @@ show_time_in_state(struct cpufreq_policy *policy, char *buf) return 0; cpufreq_stats_update(stat->cpu); for (i = 0; i < stat->state_num; i++) { - len += sprintf(buf + len, "%u %llu\n", stat->freq_table[i], + len += sprintf(buf + len, "%u %llu\n", stat->freq_table[i], (unsigned long long)cputime64_to_clock_t(stat->time_in_state[i])); } return len; @@ -171,7 +171,7 @@ cpufreq_stats_free_table (unsigned int cpu) { struct cpufreq_stats *stat = cpufreq_stats_table[cpu]; struct cpufreq_policy *policy = cpufreq_cpu_get(cpu); - if (policy && policy->cpu == cpu) + if (policy && policy->cpu == cpu) sysfs_remove_group(&policy->kobj, &stats_attr_group); if (stat) { kfree(stat->time_in_state); diff --git a/drivers/cpufreq/cpufreq_userspace.c b/drivers/cpufreq/cpufreq_userspace.c index 92a0be22a2a..071ee4f1bbf 100644 --- a/drivers/cpufreq/cpufreq_userspace.c +++ b/drivers/cpufreq/cpufreq_userspace.c @@ -41,7 +41,7 @@ static DEFINE_MUTEX (userspace_mutex); #define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_GOVERNOR, "userspace", msg) /* keep track of frequency transitions */ -static int +static int userspace_cpufreq_notifier(struct notifier_block *nb, unsigned long val, void *data) { @@ -58,7 +58,7 @@ static struct notifier_block userspace_cpufreq_notifier_block = { }; -/** +/** * cpufreq_set - set the CPU frequency * @freq: target frequency in kHz * @cpu: CPU for which the frequency is to be set @@ -103,8 +103,8 @@ static ssize_t show_speed (struct cpufreq_policy *policy, char *buf) return sprintf (buf, "%u\n", cpu_cur_freq[policy->cpu]); } -static ssize_t -store_speed (struct cpufreq_policy *policy, const char *buf, size_t count) +static ssize_t +store_speed (struct cpufreq_policy *policy, const char *buf, size_t count) { unsigned int freq = 0; unsigned int ret; @@ -118,7 +118,7 @@ store_speed (struct cpufreq_policy *policy, const char *buf, size_t count) return count; } -static struct freq_attr freq_attr_scaling_setspeed = +static struct freq_attr freq_attr_scaling_setspeed = { .attr = { .name = "scaling_setspeed", .mode = 0644, .owner = THIS_MODULE }, .show = show_speed, @@ -135,7 +135,7 @@ static int cpufreq_governor_userspace(struct cpufreq_policy *policy, return -EINVAL; BUG_ON(!policy->cur); mutex_lock(&userspace_mutex); - cpu_is_managed[cpu] = 1; + cpu_is_managed[cpu] = 1; cpu_min_freq[cpu] = policy->min; cpu_max_freq[cpu] = policy->max; cpu_cur_freq[cpu] = policy->cur; diff --git a/drivers/cpufreq/freq_table.c b/drivers/cpufreq/freq_table.c index ba460bdea60..a4818ce8891 100644 --- a/drivers/cpufreq/freq_table.c +++ b/drivers/cpufreq/freq_table.c @@ -59,9 +59,8 @@ int cpufreq_frequency_table_verify(struct cpufreq_policy *policy, if (!cpu_online(policy->cpu)) return -EINVAL; - cpufreq_verify_within_limits(policy, - policy->cpuinfo.min_freq, - policy->cpuinfo.max_freq); + cpufreq_verify_within_limits(policy, + policy->cpuinfo.min_freq, policy->cpuinfo.max_freq); for (i=0; (table[i].frequency != CPUFREQ_TABLE_END); i++) { unsigned int freq = table[i].frequency; @@ -76,9 +75,8 @@ int cpufreq_frequency_table_verify(struct cpufreq_policy *policy, if (!count) policy->max = next_larger; - cpufreq_verify_within_limits(policy, - policy->cpuinfo.min_freq, - policy->cpuinfo.max_freq); + cpufreq_verify_within_limits(policy, + policy->cpuinfo.min_freq, policy->cpuinfo.max_freq); dprintk("verification lead to (%u - %u kHz) for cpu %u\n", policy->min, policy->max, policy->cpu); @@ -199,7 +197,7 @@ EXPORT_SYMBOL_GPL(cpufreq_freq_attr_scaling_available_freqs); * if you use these, you must assure that the frequency table is valid * all the time between get_attr and put_attr! */ -void cpufreq_frequency_table_get_attr(struct cpufreq_frequency_table *table, +void cpufreq_frequency_table_get_attr(struct cpufreq_frequency_table *table, unsigned int cpu) { dprintk("setting show_table for cpu %u to %p\n", cpu, table); |