diff options
| -rw-r--r-- | drivers/net/Kconfig | 2 | ||||
| -rw-r--r-- | drivers/net/cs89x0.c | 14 | ||||
| -rw-r--r-- | drivers/net/cs89x0.h | 2 |
3 files changed, 15 insertions, 3 deletions
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index c748b0e1641..3e1e323e300 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -1330,7 +1330,7 @@ config FORCEDETH config CS89x0 tristate "CS89x0 support" - depends on (NET_PCI && (ISA || ARCH_IXDP2X01)) || ARCH_PNX0105 + depends on (NET_PCI && (ISA || ARCH_IXDP2X01)) || ARCH_PNX0105 || MACH_MP1000 ---help--- Support for CS89x0 chipset based Ethernet cards. If you have a network (Ethernet) card of this type, say Y and read the diff --git a/drivers/net/cs89x0.c b/drivers/net/cs89x0.c index a6078ad9b65..bfdae10036e 100644 --- a/drivers/net/cs89x0.c +++ b/drivers/net/cs89x0.c @@ -182,6 +182,10 @@ static unsigned int cs8900_irq_map[] = {IRQ_IXDP2X01_CS8900, 0, 0, 0}; #define CIRRUS_DEFAULT_IRQ VH_INTC_INT_NUM_CASCADED_INTERRUPT_1 /* Event inputs bank 1 - ID 35/bit 3 */ static unsigned int netcard_portlist[] __initdata = {CIRRUS_DEFAULT_BASE, 0}; static unsigned int cs8900_irq_map[] = {CIRRUS_DEFAULT_IRQ, 0, 0, 0}; +#elif defined(CONFIG_MACH_MP1000) +#include <asm/arch/mp1000-seprom.h> +static unsigned int netcard_portlist[] __initdata = {MP1000_EIO_BASE+0x300, 0}; +static unsigned int cs8900_irq_map[] = {IRQ_EINT3,0,0,0}; #else static unsigned int netcard_portlist[] __initdata = { 0x300, 0x320, 0x340, 0x360, 0x200, 0x220, 0x240, 0x260, 0x280, 0x2a0, 0x2c0, 0x2e0, 0}; @@ -590,6 +594,10 @@ cs89x0_probe1(struct net_device *dev, int ioaddr, int modular) cnt -= j; } } else +#elif defined(CONFIG_MACH_MP1000) + if (1) { + memcpy(dev->dev_addr, get_eeprom_mac_address(), ETH_ALEN); + } else #endif if ((readreg(dev, PP_SelfST) & (EEPROM_OK | EEPROM_PRESENT)) == @@ -649,6 +657,10 @@ cs89x0_probe1(struct net_device *dev, int ioaddr, int modular) if (1) { printk(KERN_NOTICE "cs89x0: No EEPROM on HiCO.SH4\n"); } else +#elif defined(CONFIG_MACH_MP1000) + if (1) { + lp->force |= FORCE_RJ45; + } else #endif if ((readreg(dev, PP_SelfST) & EEPROM_PRESENT) == 0) printk(KERN_WARNING "cs89x0: No EEPROM, relying on command line....\n"); @@ -1231,7 +1243,7 @@ net_open(struct net_device *dev) else #endif { -#if !defined(CONFIG_ARCH_IXDP2X01) && !defined(CONFIG_ARCH_PNX0105) +#if !defined(CONFIG_ARCH_IXDP2X01) && !defined(CONFIG_ARCH_PNX0105) && !defined(CONFIG_MACH_MP1000) if (((1 << dev->irq) & lp->irq_map) == 0) { printk(KERN_ERR "%s: IRQ %d is not in our map of allowable IRQs, which is %x\n", dev->name, dev->irq, lp->irq_map); diff --git a/drivers/net/cs89x0.h b/drivers/net/cs89x0.h index decea264f12..f19d1ebe018 100644 --- a/drivers/net/cs89x0.h +++ b/drivers/net/cs89x0.h @@ -16,7 +16,7 @@ #include <linux/config.h> -#if defined(CONFIG_ARCH_IXDP2X01) || defined(CONFIG_ARCH_PNX0105) +#if defined(CONFIG_ARCH_IXDP2X01) || defined(CONFIG_ARCH_PNX0105) || defined (CONFIG_MACH_MP1000) /* IXDP2401/IXDP2801 uses dword-aligned register addressing */ #define CS89x0_PORT(reg) ((reg) * 2) #else |