diff options
95 files changed, 4438 insertions, 2714 deletions
diff --git a/MAINTAINERS b/MAINTAINERS index cf4abddfc8a..84285b5ba35 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -71,7 +71,7 @@ P: Person M: Mail patches to L: Mailing list that is relevant to this area W: Web-page with status/info -T: SCM tree type and location. Type is one of: git, hg, quilt. +T: SCM tree type and location. Type is one of: git, hg, quilt, stgit. S: Status, one of the following: Supported: Someone is actually paid to look after this. @@ -159,7 +159,8 @@ F: drivers/net/r8169.c 8250/16?50 (AND CLONE UARTS) SERIAL DRIVER L: linux-serial@vger.kernel.org W: http://serial.sourceforge.net -S: Orphan +M: alan@lxorguk.ukuu.org.uk +S: Odd Fixes F: drivers/serial/8250* F: include/linux/serial_8250.h @@ -5629,6 +5630,7 @@ P: Alan Cox M: alan@lxorguk.ukuu.org.uk L: linux-kernel@vger.kernel.org S: Maintained +T: stgit http://zeniv.linux.org.uk/~alan/ttydev/ TULIP NETWORK DRIVERS P: Grant Grundler diff --git a/arch/arm/plat-mxc/include/mach/imx-uart.h b/arch/arm/plat-mxc/include/mach/imx-uart.h index 599217b2e13..f9bd17dd8dd 100644 --- a/arch/arm/plat-mxc/include/mach/imx-uart.h +++ b/arch/arm/plat-mxc/include/mach/imx-uart.h @@ -20,11 +20,16 @@ #define ASMARM_ARCH_UART_H #define IMXUART_HAVE_RTSCTS (1<<0) +#define IMXUART_IRDA (1<<1) struct imxuart_platform_data { int (*init)(struct platform_device *pdev); int (*exit)(struct platform_device *pdev); unsigned int flags; + void (*irda_enable)(int enable); + unsigned int irda_inv_rx:1; + unsigned int irda_inv_tx:1; + unsigned short transceiver_delay; }; #endif diff --git a/arch/x86/include/asm/termios.h b/arch/x86/include/asm/termios.h index f72956331c4..c4ee8056bac 100644 --- a/arch/x86/include/asm/termios.h +++ b/arch/x86/include/asm/termios.h @@ -67,6 +67,7 @@ static inline int user_termio_to_kernel_termios(struct ktermios *termios, SET_LOW_TERMIOS_BITS(termios, termio, c_oflag); SET_LOW_TERMIOS_BITS(termios, termio, c_cflag); SET_LOW_TERMIOS_BITS(termios, termio, c_lflag); + get_user(termios->c_line, &termio->c_line); return copy_from_user(termios->c_cc, termio->c_cc, NCC); } diff --git a/drivers/bluetooth/hci_ldisc.c b/drivers/bluetooth/hci_ldisc.c index af761dc434f..4895f0e0532 100644 --- a/drivers/bluetooth/hci_ldisc.c +++ b/drivers/bluetooth/hci_ldisc.c @@ -277,8 +277,8 @@ static int hci_uart_tty_open(struct tty_struct *tty) /* FIXME: why is this needed. Note don't use ldisc_ref here as the open path is before the ldisc is referencable */ - if (tty->ldisc.ops->flush_buffer) - tty->ldisc.ops->flush_buffer(tty); + if (tty->ldisc->ops->flush_buffer) + tty->ldisc->ops->flush_buffer(tty); tty_driver_flush_buffer(tty); return 0; @@ -463,7 +463,6 @@ static int hci_uart_tty_ioctl(struct tty_struct *tty, struct file * file, clear_bit(HCI_UART_PROTO_SET, &hu->flags); return err; } - tty->low_latency = 1; } else return -EBUSY; break; diff --git a/drivers/char/Kconfig b/drivers/char/Kconfig index 735bbe2be51..02ecfd5fa61 100644 --- a/drivers/char/Kconfig +++ b/drivers/char/Kconfig @@ -97,6 +97,19 @@ config DEVKMEM kind of kernel debugging operations. When in doubt, say "N". +config BFIN_JTAG_COMM + tristate "Blackfin JTAG Communication" + depends on BLACKFIN + help + Add support for emulating a TTY device over the Blackfin JTAG. + + To compile this driver as a module, choose M here: the + module will be called bfin_jtag_comm. + +config BFIN_JTAG_COMM_CONSOLE + bool "Console on Blackfin JTAG" + depends on BFIN_JTAG_COMM=y + config SERIAL_NONSTANDARD bool "Non-standard serial port support" depends on HAS_IOMEM diff --git a/drivers/char/Makefile b/drivers/char/Makefile index 9caf5b5ad1c..189efcff08c 100644 --- a/drivers/char/Makefile +++ b/drivers/char/Makefile @@ -13,6 +13,7 @@ obj-$(CONFIG_LEGACY_PTYS) += pty.o obj-$(CONFIG_UNIX98_PTYS) += pty.o obj-y += misc.o obj-$(CONFIG_VT) += vt_ioctl.o vc_screen.o selection.o keyboard.o +obj-$(CONFIG_BFIN_JTAG_COMM) += bfin_jtag_comm.o obj-$(CONFIG_CONSOLE_TRANSLATIONS) += consolemap.o consolemap_deftbl.o obj-$(CONFIG_HW_CONSOLE) += vt.o defkeymap.o obj-$(CONFIG_AUDIT) += tty_audit.o diff --git a/drivers/char/bfin_jtag_comm.c b/drivers/char/bfin_jtag_comm.c new file mode 100644 index 00000000000..44c113d5604 --- /dev/null +++ b/drivers/char/bfin_jtag_comm.c @@ -0,0 +1,365 @@ +/* + * TTY over Blackfin JTAG Communication + * + * Copyright 2008-2009 Analog Devices Inc. + * + * Enter bugs at http://blackfin.uclinux.org/ + * + * Licensed under the GPL-2 or later. + */ + +#include <linux/circ_buf.h> +#include <linux/console.h> +#include <linux/delay.h> +#include <linux/err.h> +#include <linux/kernel.h> +#include <linux/kthread.h> +#include <linux/module.h> +#include <linux/mutex.h> +#include <linux/sched.h> +#include <linux/tty.h> +#include <linux/tty_driver.h> +#include <linux/tty_flip.h> +#include <asm/atomic.h> + +/* See the Debug/Emulation chapter in the HRM */ +#define EMUDOF 0x00000001 /* EMUDAT_OUT full & valid */ +#define EMUDIF 0x00000002 /* EMUDAT_IN full & valid */ +#define EMUDOOVF 0x00000004 /* EMUDAT_OUT overflow */ +#define EMUDIOVF 0x00000008 /* EMUDAT_IN overflow */ + +#define DRV_NAME "bfin-jtag-comm" +#define DEV_NAME "ttyBFJC" + +#define pr_init(fmt, args...) ({ static const __initdata char __fmt[] = fmt; printk(__fmt, ## args); }) +#define debug(fmt, args...) pr_debug(DRV_NAME ": " fmt, ## args) + +static inline uint32_t bfin_write_emudat(uint32_t emudat) +{ + __asm__ __volatile__("emudat = %0;" : : "d"(emudat)); + return emudat; +} + +static inline uint32_t bfin_read_emudat(void) +{ + uint32_t emudat; + __asm__ __volatile__("%0 = emudat;" : "=d"(emudat)); + return emudat; +} + +static inline uint32_t bfin_write_emudat_chars(char a, char b, char c, char d) +{ + return bfin_write_emudat((a << 0) | (b << 8) | (c << 16) | (d << 24)); +} + +#define CIRC_SIZE 2048 /* see comment in tty_io.c:do_tty_write() */ +#define CIRC_MASK (CIRC_SIZE - 1) +#define circ_empty(circ) ((circ)->head == (circ)->tail) +#define circ_free(circ) CIRC_SPACE((circ)->head, (circ)->tail, CIRC_SIZE) +#define circ_cnt(circ) CIRC_CNT((circ)->head, (circ)->tail, CIRC_SIZE) +#define circ_byte(circ, idx) ((circ)->buf[(idx) & CIRC_MASK]) + +static struct tty_driver *bfin_jc_driver; +static struct task_struct *bfin_jc_kthread; +static struct tty_struct * volatile bfin_jc_tty; +static unsigned long bfin_jc_count; +static DEFINE_MUTEX(bfin_jc_tty_mutex); +static volatile struct circ_buf bfin_jc_write_buf; + +static int +bfin_jc_emudat_manager(void *arg) +{ + uint32_t inbound_len = 0, outbound_len = 0; + + while (!kthread_should_stop()) { + /* no one left to give data to, so sleep */ + if (bfin_jc_tty == NULL && circ_empty(&bfin_jc_write_buf)) { + debug("waiting for readers\n"); + __set_current_state(TASK_UNINTERRUPTIBLE); + schedule(); + __set_current_state(TASK_RUNNING); + } + + /* no data available, so just chill */ + if (!(bfin_read_DBGSTAT() & EMUDIF) && circ_empty(&bfin_jc_write_buf)) { + debug("waiting for data (in_len = %i) (circ: %i %i)\n", + inbound_len, bfin_jc_write_buf.tail, bfin_jc_write_buf.head); + if (inbound_len) + schedule(); + else + schedule_timeout_interruptible(HZ); + continue; + } + + /* if incoming data is ready, eat it */ + if (bfin_read_DBGSTAT() & EMUDIF) { + struct tty_struct *tty; + mutex_lock(&bfin_jc_tty_mutex); + tty = (struct tty_struct *)bfin_jc_tty; + if (tty != NULL) { + uint32_t emudat = bfin_read_emudat(); + if (inbound_len == 0) { + debug("incoming length: 0x%08x\n", emudat); + inbound_len = emudat; + } else { + size_t num_chars = (4 <= inbound_len ? 4 : inbound_len); + debug(" incoming data: 0x%08x (pushing %zu)\n", emudat, num_chars); + inbound_len -= num_chars; + tty_insert_flip_string(tty, (unsigned char *)&emudat, num_chars); + tty_flip_buffer_push(tty); + } + } + mutex_unlock(&bfin_jc_tty_mutex); + } + + /* if outgoing data is ready, post it */ + if (!(bfin_read_DBGSTAT() & EMUDOF) && !circ_empty(&bfin_jc_write_buf)) { + if (outbound_len == 0) { + outbound_len = circ_cnt(&bfin_jc_write_buf); + bfin_write_emudat(outbound_len); + debug("outgoing length: 0x%08x\n", outbound_len); + } else { + struct tty_struct *tty; + int tail = bfin_jc_write_buf.tail; + size_t ate = (4 <= outbound_len ? 4 : outbound_len); + uint32_t emudat = + bfin_write_emudat_chars( + circ_byte(&bfin_jc_write_buf, tail + 0), + circ_byte(&bfin_jc_write_buf, tail + 1), + circ_byte(&bfin_jc_write_buf, tail + 2), + circ_byte(&bfin_jc_write_buf, tail + 3) + ); < |