diff options
| -rw-r--r-- | arch/powerpc/platforms/chrp/gg2.h | 61 | ||||
| -rw-r--r-- | arch/powerpc/platforms/chrp/pci.c | 2 | ||||
| -rw-r--r-- | arch/powerpc/platforms/chrp/setup.c | 2 | ||||
| -rw-r--r-- | arch/powerpc/platforms/embedded6xx/linkstation.c | 3 | ||||
| -rw-r--r-- | arch/powerpc/platforms/embedded6xx/ls_uart.c | 3 | ||||
| -rw-r--r-- | arch/powerpc/platforms/embedded6xx/mpc10x.h | 180 | ||||
| -rw-r--r-- | drivers/macintosh/ans-lcd.c | 3 | ||||
| -rw-r--r-- | drivers/macintosh/ans-lcd.h (renamed from include/asm-ppc/ans-lcd.h) | 0 | ||||
| -rw-r--r-- | include/asm-powerpc/8xx_immap.h | 564 | ||||
| -rw-r--r-- | include/asm-powerpc/commproc.h | 692 | ||||
| -rw-r--r-- | include/asm-powerpc/cpm2.h | 1248 | ||||
| -rw-r--r-- | include/asm-powerpc/highmem.h | 135 | ||||
| -rw-r--r-- | include/asm-powerpc/hydra.h | 102 | ||||
| -rw-r--r-- | include/asm-powerpc/immap_cpm2.h | 648 | ||||
| -rw-r--r-- | include/asm-powerpc/kgdb.h | 57 | ||||
| -rw-r--r-- | include/asm-powerpc/mpc52xx_psc.h | 191 |
16 files changed, 3886 insertions, 5 deletions
diff --git a/arch/powerpc/platforms/chrp/gg2.h b/arch/powerpc/platforms/chrp/gg2.h new file mode 100644 index 00000000000..341ae55b99f --- /dev/null +++ b/arch/powerpc/platforms/chrp/gg2.h @@ -0,0 +1,61 @@ +/* + * include/asm-ppc/gg2.h -- VLSI VAS96011/12 `Golden Gate 2' register definitions + * + * Copyright (C) 1997 Geert Uytterhoeven + * + * This file is based on the following documentation: + * + * The VAS96011/12 Chipset, Data Book, Edition 1.0 + * VLSI Technology, Inc. + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file COPYING in the main directory of this archive + * for more details. + */ + +#ifndef _ASMPPC_GG2_H +#define _ASMPPC_GG2_H + + /* + * Memory Map (CHRP mode) + */ + +#define GG2_PCI_MEM_BASE 0xc0000000 /* Peripheral memory space */ +#define GG2_ISA_MEM_BASE 0xf7000000 /* Peripheral memory alias */ +#define GG2_ISA_IO_BASE 0xf8000000 /* Peripheral I/O space */ +#define GG2_PCI_CONFIG_BASE 0xfec00000 /* PCI configuration space */ +#define GG2_INT_ACK_SPECIAL 0xfec80000 /* Interrupt acknowledge and */ + /* special PCI cycles */ +#define GG2_ROM_BASE0 0xff000000 /* ROM bank 0 */ +#define GG2_ROM_BASE1 0xff800000 /* ROM bank 1 */ + + + /* + * GG2 specific PCI Registers + */ + +extern void __iomem *gg2_pci_config_base; /* kernel virtual address */ + +#define GG2_PCI_BUSNO 0x40 /* Bus number */ +#define GG2_PCI_SUBBUSNO 0x41 /* Subordinate bus number */ +#define GG2_PCI_DISCCTR 0x42 /* Disconnect counter */ +#define GG2_PCI_PPC_CTRL 0x50 /* PowerPC interface control register */ +#define GG2_PCI_ADDR_MAP 0x5c /* Address map */ +#define GG2_PCI_PCI_CTRL 0x60 /* PCI interface control register */ +#define GG2_PCI_ROM_CTRL 0x70 /* ROM interface control register */ +#define GG2_PCI_ROM_TIME 0x74 /* ROM timing */ +#define GG2_PCI_CC_CTRL 0x80 /* Cache controller control register */ +#define GG2_PCI_DRAM_BANK0 0x90 /* Control register for DRAM bank #0 */ +#define GG2_PCI_DRAM_BANK1 0x94 /* Control register for DRAM bank #1 */ +#define GG2_PCI_DRAM_BANK2 0x98 /* Control register for DRAM bank #2 */ +#define GG2_PCI_DRAM_BANK3 0x9c /* Control register for DRAM bank #3 */ +#define GG2_PCI_DRAM_BANK4 0xa0 /* Control register for DRAM bank #4 */ +#define GG2_PCI_DRAM_BANK5 0xa4 /* Control register for DRAM bank #5 */ +#define GG2_PCI_DRAM_TIME0 0xb0 /* Timing parameters set #0 */ +#define GG2_PCI_DRAM_TIME1 0xb4 /* Timing parameters set #1 */ +#define GG2_PCI_DRAM_CTRL 0xc0 /* DRAM control */ +#define GG2_PCI_ERR_CTRL 0xd0 /* Error control register */ +#define GG2_PCI_ERR_STATUS 0xd4 /* Error status register */ + /* Cleared when read */ + +#endif /* _ASMPPC_GG2_H */ diff --git a/arch/powerpc/platforms/chrp/pci.c b/arch/powerpc/platforms/chrp/pci.c index 974952ed15c..e43465d34d2 100644 --- a/arch/powerpc/platforms/chrp/pci.c +++ b/arch/powerpc/platforms/chrp/pci.c @@ -13,7 +13,6 @@ #include <asm/irq.h> #include <asm/hydra.h> #include <asm/prom.h> -#include <asm/gg2.h> #include <asm/machdep.h> #include <asm/sections.h> #include <asm/pci-bridge.h> @@ -21,6 +20,7 @@ #include <asm/rtas.h> #include "chrp.h" +#include "gg2.h" /* LongTrail */ void __iomem *gg2_pci_config_base; diff --git a/arch/powerpc/platforms/chrp/setup.c b/arch/powerpc/platforms/chrp/setup.c index dde5ef4dde3..96498ad7b94 100644 --- a/arch/powerpc/platforms/chrp/setup.c +++ b/arch/powerpc/platforms/chrp/setup.c @@ -37,7 +37,6 @@ #include <asm/io.h> #include <asm/pgtable.h> #include <asm/prom.h> -#include <asm/gg2.h> #include <asm/pci-bridge.h> #include <asm/dma.h> #include <asm/machdep.h> @@ -51,6 +50,7 @@ #include <asm/xmon.h> #include "chrp.h" +#include "gg2.h" void rtas_indicator_progress(char *, unsigned short); diff --git a/arch/powerpc/platforms/embedded6xx/linkstation.c b/arch/powerpc/platforms/embedded6xx/linkstation.c index 8c60e0207d0..61ca02c2d64 100644 --- a/arch/powerpc/platforms/embedded6xx/linkstation.c +++ b/arch/powerpc/platforms/embedded6xx/linkstation.c @@ -18,9 +18,10 @@ #include <asm/time.h> #include <asm/prom.h> #include <asm/mpic.h> -#include <asm/mpc10x.h> #include <asm/pci-bridge.h> +#include "mpc10x.h" + static struct mtd_partition linkstation_physmap_partitions[] = { { .name = "mtd_firmimg", diff --git a/arch/powerpc/platforms/embedded6xx/ls_uart.c b/arch/powerpc/platforms/embedded6xx/ls_uart.c index f7a4def5eff..0d9f1500a67 100644 --- a/arch/powerpc/platforms/embedded6xx/ls_uart.c +++ b/arch/powerpc/platforms/embedded6xx/ls_uart.c @@ -4,10 +4,11 @@ #include <linux/serial_reg.h> #include <linux/serial_8250.h> #include <asm/io.h> -#include <asm/mpc10x.h> #include <asm/prom.h> #include <asm/termbits.h> +#include "mpc10x.h" + static void __iomem *avr_addr; static unsigned long avr_clock; diff --git a/arch/powerpc/platforms/embedded6xx/mpc10x.h b/arch/powerpc/platforms/embedded6xx/mpc10x.h new file mode 100644 index 00000000000..b30a6a3b5bd --- /dev/null +++ b/arch/powerpc/platforms/embedded6xx/mpc10x.h @@ -0,0 +1,180 @@ +/* + * Common routines for the Motorola SPS MPC106/8240/107 Host bridge/Mem + * ctlr/EPIC/etc. + * + * Author: Mark A. Greer + * mgreer@mvista.com + * + * 2001 (c) MontaVista, Software, Inc. This file is licensed under + * the terms of the GNU General Public License version 2. This program + * is licensed "as is" without any warranty of any kind, whether express + * or implied. + */ +#ifndef __PPC_KERNEL_MPC10X_H +#define __PPC_KERNEL_MPC10X_H + +#include <linux/pci_ids.h> +#include <asm/pci-bridge.h> + +/* + * The values here don't completely map everything but should work in most + * cases. + * + * MAP A (PReP Map) + * Processor: 0x80000000 - 0x807fffff -> PCI I/O: 0x00000000 - 0x007fffff + * Processor: 0xc0000000 - 0xdfffffff -> PCI MEM: 0x00000000 - 0x1fffffff + * PCI MEM: 0x80000000 -> Processor System Memory: 0x00000000 + * EUMB mapped to: ioremap_base - 0x00100000 (ioremap_base - 1 MB) + * + * MAP B (CHRP Map) + * Processor: 0xfe000000 - 0xfebfffff -> PCI I/O: 0x00000000 - 0x00bfffff + * Processor: 0x80000000 - 0xbfffffff -> PCI MEM: 0x80000000 - 0xbfffffff + * PCI MEM: 0x00000000 -> Processor System Memory: 0x00000000 + * EUMB mapped to: ioremap_base - 0x00100000 (ioremap_base - 1 MB) + */ + +/* + * Define the vendor/device IDs for the various bridges--should be added to + * <linux/pci_ids.h> + */ +#define MPC10X_BRIDGE_106 ((PCI_DEVICE_ID_MOTOROLA_MPC106 << 16) | \ + PCI_VENDOR_ID_MOTOROLA) +#define MPC10X_BRIDGE_8240 ((0x0003 << 16) | PCI_VENDOR_ID_MOTOROLA) +#define MPC10X_BRIDGE_107 ((0x0004 << 16) | PCI_VENDOR_ID_MOTOROLA) +#define MPC10X_BRIDGE_8245 ((0x0006 << 16) | PCI_VENDOR_ID_MOTOROLA) + +/* Define the type of map to use */ +#define MPC10X_MEM_MAP_A 1 +#define MPC10X_MEM_MAP_B 2 + +/* Map A (PReP Map) Defines */ +#define MPC10X_MAPA_CNFG_ADDR 0x80000cf8 +#define MPC10X_MAPA_CNFG_DATA 0x80000cfc + +#define MPC10X_MAPA_ISA_IO_BASE 0x80000000 +#define MPC10X_MAPA_ISA_MEM_BASE 0xc0000000 +#define MPC10X_MAPA_DRAM_OFFSET 0x80000000 + +#define MPC10X_MAPA_PCI_INTACK_ADDR 0xbffffff0 +#define MPC10X_MAPA_PCI_IO_START 0x00000000 +#define MPC10X_MAPA_PCI_IO_END (0x00800000 - 1) +#define MPC10X_MAPA_PCI_MEM_START 0x00000000 +#define MPC10X_MAPA_PCI_MEM_END (0x20000000 - 1) + +#define MPC10X_MAPA_PCI_MEM_OFFSET (MPC10X_MAPA_ISA_MEM_BASE - \ + MPC10X_MAPA_PCI_MEM_START) + +/* Map B (CHRP Map) Defines */ +#define MPC10X_MAPB_CNFG_ADDR 0xfec00000 +#define MPC10X_MAPB_CNFG_DATA 0xfee00000 + +#define MPC10X_MAPB_ISA_IO_BASE 0xfe000000 +#define MPC10X_MAPB_ISA_MEM_BASE 0x80000000 +#define MPC10X_MAPB_DRAM_OFFSET 0x00000000 + +#define MPC10X_MAPB_PCI_INTACK_ADDR 0xfef00000 +#define MPC10X_MAPB_PCI_IO_START 0x00000000 +#define MPC10X_MAPB_PCI_IO_END (0x00c00000 - 1) +#define MPC10X_MAPB_PCI_MEM_START 0x80000000 +#define MPC10X_MAPB_PCI_MEM_END (0xc0000000 - 1) + +#define MPC10X_MAPB_PCI_MEM_OFFSET (MPC10X_MAPB_ISA_MEM_BASE - \ + MPC10X_MAPB_PCI_MEM_START) + +/* Set hose members to values appropriate for the mem map used */ +#define MPC10X_SETUP_HOSE(hose, map) { \ + (hose)->pci_mem_offset = MPC10X_MAP##map##_PCI_MEM_OFFSET; \ + (hose)->io_space.start = MPC10X_MAP##map##_PCI_IO_START; \ + (hose)->io_space.end = MPC10X_MAP##map##_PCI_IO_END; \ + (hose)->mem_space.start = MPC10X_MAP##map##_PCI_MEM_START; \ + (hose)->mem_space.end = MPC10X_MAP##map##_PCI_MEM_END; \ + (hose)->io_base_virt = (void *)MPC10X_MAP##map##_ISA_IO_BASE; \ +} + + +/* Miscellaneous Configuration register offsets */ +#define MPC10X_CFG_PIR_REG 0x09 +#define MPC10X_CFG_PIR_HOST_BRIDGE 0x00 +#define MPC10X_CFG_PIR_AGENT 0x01 + +#define MPC10X_CFG_EUMBBAR 0x78 + +#define MPC10X_CFG_PICR1_REG 0xa8 +#define MPC10X_CFG_PICR1_ADDR_MAP_MASK 0x00010000 +#define MPC10X_CFG_PICR1_ADDR_MAP_A 0x00010000 +#define MPC10X_CFG_PICR1_ADDR_MAP_B 0x00000000 +#define MPC10X_CFG_PICR1_SPEC_PCI_RD 0x00000004 +#define MPC10X_CFG_PICR1_ST_GATH_EN 0x00000040 + +#define MPC10X_CFG_PICR2_REG 0xac +#define MPC10X_CFG_PICR2_COPYBACK_OPT 0x00000001 + +#define MPC10X_CFG_MAPB_OPTIONS_REG 0xe0 +#define MPC10X_CFG_MAPB_OPTIONS_CFAE 0x80 /* CPU_FD_ALIAS_EN */ +#define MPC10X_CFG_MAPB_OPTIONS_PFAE 0x40 /* PCI_FD_ALIAS_EN */ +#define MPC10X_CFG_MAPB_OPTIONS_DR 0x20 /* DLL_RESET */ +#define MPC10X_CFG_MAPB_OPTIONS_PCICH 0x08 /* PCI_COMPATIBILITY_HOLE */ +#define MPC10X_CFG_MAPB_OPTIONS_PROCCH 0x04 /* PROC_COMPATIBILITY_HOLE */ + +/* Define offsets for the memory controller registers in the config space */ +#define MPC10X_MCTLR_MEM_START_1 0x80 /* Banks 0-3 */ +#define MPC10X_MCTLR_MEM_START_2 0x84 /* Banks 4-7 */ +#define MPC10X_MCTLR_EXT_MEM_START_1 0x88 /* Banks 0-3 */ +#define MPC10X_MCTLR_EXT_MEM_START_2 0x8c /* Banks 4-7 */ + +#define MPC10X_MCTLR_MEM_END_1 0x90 /* Banks 0-3 */ +#define MPC10X_MCTLR_MEM_END_2 0x94 /* Banks 4-7 */ +#define MPC10X_MCTLR_EXT_MEM_END_1 0x98 /* Banks 0-3 */ +#define MPC10X_MCTLR_EXT_MEM_END_2 0x9c /* Banks 4-7 */ + +#define MPC10X_MCTLR_MEM_BANK_ENABLES 0xa0 + +/* Define some offset in the EUMB */ +#define MPC10X_EUMB_SIZE 0x00100000 /* Total EUMB size (1MB) */ + +#define MPC10X_EUMB_MU_OFFSET 0x00000000 /* Msg Unit reg offset */ +#define MPC10X_EUMB_MU_SIZE 0x00001000 /* Msg Unit reg size */ +#define MPC10X_EUMB_DMA_OFFSET 0x00001000 /* DMA Unit reg offset */ +#define MPC10X_EUMB_DMA_SIZE 0x00001000 /* DMA Unit reg size */ +#define MPC10X_EUMB_ATU_OFFSET 0x00002000 /* Addr xlate reg offset */ +#define MPC10X_EUMB_ATU_SIZE 0x00001000 /* Addr xlate reg size */ +#define MPC10X_EUMB_I2C_OFFSET 0x00003000 /* I2C Unit reg offset */ +#define MPC10X_EUMB_I2C_SIZE 0x00001000 /* I2C Unit reg size */ +#define MPC10X_EUMB_DUART_OFFSET 0x00004000 /* DUART Unit reg offset (8245) */ +#define MPC10X_EUMB_DUART_SIZE 0x00001000 /* DUART Unit reg size (8245) */ +#define MPC10X_EUMB_EPIC_OFFSET 0x00040000 /* EPIC offset in EUMB */ +#define MPC10X_EUMB_EPIC_SIZE 0x00030000 /* EPIC size */ +#define MPC10X_EUMB_PM_OFFSET 0x000fe000 /* Performance Monitor reg offset (8245) */ +#define MPC10X_EUMB_PM_SIZE 0x00001000 /* Performance Monitor reg size (8245) */ +#define MPC10X_EUMB_WP_OFFSET 0x000ff000 /* Data path diagnostic, watchpoint reg offset */ +#define MPC10X_EUMB_WP_SIZE 0x00001000 /* Data path diagnostic, watchpoint reg size */ + +/* + * Define some recommended places to put the EUMB regs. + * For both maps, recommend putting the EUMB from 0xeff00000 to 0xefffffff. + */ +extern unsigned long ioremap_base; +#define MPC10X_MAPA_EUMB_BASE (ioremap_base - MPC10X_EUMB_SIZE) +#define MPC10X_MAPB_EUMB_BASE MPC10X_MAPA_EUMB_BASE + +enum ppc_sys_devices { + MPC10X_IIC1, + MPC10X_DMA0, + MPC10X_DMA1, + MPC10X_UART0, + MPC10X_UART1, + NUM_PPC_SYS_DEVS, +}; + +int mpc10x_bridge_init(struct pci_controller *hose, + uint current_map, + uint new_map, + uint phys_eumb_base); +unsigned long mpc10x_get_mem_size(uint mem_map); +int mpc10x_enable_store_gathering(struct pci_controller *hose); +int mpc10x_disable_store_gathering(struct pci_controller *hose); + +/* For MPC107 boards that use the built-in openpic */ +void mpc10x_set_openpic(void); + +#endif /* __PPC_KERNEL_MPC10X_H */ diff --git a/drivers/macintosh/ans-lcd.c b/drivers/macintosh/ans-lcd.c index e54c4d9f636..73c50bc0209 100644 --- a/drivers/macintosh/ans-lcd.c +++ b/drivers/macintosh/ans-lcd.c @@ -14,9 +14,10 @@ #include <asm/uaccess.h> #include <asm/sections.h> #include <asm/prom.h> -#include <asm/ans-lcd.h> #include <asm/io.h> +#include "ans-lcd.h" + #define ANSLCD_ADDR 0xf301c000 #define ANSLCD_CTRL_IX 0x00 #define ANSLCD_DATA_IX 0x10 diff --git a/include/asm-ppc/ans-lcd.h b/drivers/macintosh/ans-lcd.h index d795b9fd2db..d795b9fd2db 100644 --- a/include/asm-ppc/ans-lcd.h +++ b/drivers/macintosh/ans-lcd.h diff --git a/include/asm-powerpc/8xx_immap.h b/include/asm-powerpc/8xx_immap.h new file mode 100644 index 00000000000..1311cefdfd3 --- /dev/null +++ b/include/asm-powerpc/8xx_immap.h @@ -0,0 +1,564 @@ +/* + * MPC8xx Internal Memory Map + * Copyright (c) 1997 Dan Malek (dmalek@jlc.net) + * + * The I/O on the MPC860 is comprised of blocks of special registers + * and the dual port ram for the Communication Processor Module. + * Within this space are functional units such as the SIU, memory + * controller, system timers, and other control functions. It is + * a combination that I found difficult to separate into logical + * functional files.....but anyone else is welcome to try. -- Dan + */ +#ifdef __KERNEL__ +#ifndef __IMMAP_8XX__ +#define __IMMAP_8XX__ + +/* System configuration registers. +*/ +typedef struct sys_conf { + uint sc_siumcr; + uint sc_sypcr; + uint sc_swt; + char res1[2]; + ushort sc_swsr; + uint sc_sipend; + uint sc_simask; + uint sc_siel; + uint sc_sivec; + uint sc_tesr; + char res2[0xc]; + uint sc_sdcr; + char res3[0x4c]; +} sysconf8xx_t; + +/* PCMCIA configuration registers. +*/ +typedef struct pcmcia_conf { + uint pcmc_pbr0; + uint pcmc_por0; + uint pcmc_pbr1; + uint pcmc_por1; + uint pcmc_pbr2; + uint pcmc_por2; + uint pcmc_pbr3; + uint pcmc_por3; + uint pcmc_pbr4; + uint pcmc_por4; + uint pcmc_pbr5; + uint pcmc_por5; + uint pcmc_pbr6; + uint pcmc_por6; + uint pcmc_pbr7; + uint pcmc_por7; + char res1[0x20]; + uint pcmc_pgcra; + uint pcmc_pgcrb; + uint pcmc_pscr; + char res2[4]; + uint pcmc_pipr; + char res3[4]; + uint pcmc_per; + char res4[4]; +} pcmconf8xx_t; + +/* Memory controller registers. +*/ +typedef struct mem_ctlr { + uint memc_br0; + uint memc_or0; + uint memc_br1; + uint memc_or1; + uint memc_br2; + uint memc_or2; + uint memc_br3; + uint memc_or3; + uint memc_br4; + uint memc_or4; + uint memc_br5; + uint memc_or5; + uint memc_br6; + uint memc_or6; + uint memc_br7; + uint memc_or7; + char res1[0x24]; + uint memc_mar; + uint memc_mcr; + char res2[4]; + uint memc_mamr; + uint memc_mbmr; + ushort memc_mstat; + ushort memc_mptpr; + uint memc_mdr; + char res3[0x80]; +} memctl8xx_t; + +/*----------------------------------------------------------------------- + * BR - Memory Controler: Base Register 16-9 + */ +#define BR_BA_MSK 0xffff8000 /* Base Address Mask */ +#define BR_AT_MSK 0x00007000 /* Address Type Mask */ +#define BR_PS_MSK 0x00000c00 /* Port Size Mask */ +#define BR_PS_32 0x00000000 /* 32 bit port size */ +#define BR_PS_16 0x00000800 /* 16 bit port size */ +#define BR_PS_8 0x00000400 /* 8 bit port size */ +#define BR_PARE 0x00000200 /* Parity Enable */ +#define BR_WP 0x00000100 /* Write Protect */ +#define BR_MS_MSK 0x000000c0 /* Machine Select Mask */ +#define BR_MS_GPCM 0x00000000 /* G.P.C.M. Machine Select */ +#define BR_MS_UPMA 0x00000080 /* U.P.M.A Machine Select */ +#define BR_MS_UPMB 0x000000c0 /* U.P.M.B Machine Select */ +#define BR_V 0x00000001 /* Bank Valid */ + +/*----------------------------------------------------------------------- + * OR - Memory Controler: Option Register 16-11 + */ +#define OR_AM_MSK 0xffff8000 /* Address Mask Mask */ +#define OR_ATM_MSK 0x00007000 /* Address Type Mask Mask */ +#define OR_CSNT_SAM 0x00000800 /* Chip Select Negation Time/ Start */ + /* Address Multiplex */ +#define OR_ACS_MSK 0x00000600 /* Address to Chip Select Setup mask */ +#define OR_ACS_DIV1 0x00000000 /* CS is output at the same time */ +#define OR_ACS_DIV4 0x00000400 /* CS is output 1/4 a clock later */ +#define OR_ACS_DIV2 0x00000600 /* CS is output 1/2 a clock later */ +#define OR_G5LA 0x00000400 /* Output #GPL5 on #GPL_A5 */ +#define OR_G5LS 0x00000200 /* Drive #GPL high on falling edge of...*/ +#define OR_BI 0x00000100 /* Burst inhibit */ +#define OR_SCY_MSK 0x000000f0 /* Cycle Lenght in Clocks */ +#define OR_SCY_0_CLK 0x00000000 /* 0 clock cycles wait states */ +#define OR_SCY_1_CLK 0x00000010 /* 1 clock cycles wait states */ +#define OR_SCY_2_CLK 0x00000020 /* 2 clock cycles wait states */ +#define OR_SCY_3_CLK 0x00000030 /* 3 clock cycles wait states */ +#define OR_SCY_4_CLK 0x00000040 /* 4 clock cycles wait states */ +#define OR_SCY_5_CLK 0x00000050 /* 5 clock cycles wait states */ +#define OR_SCY_6_CLK 0x00000060 /* 6 clock cycles wait states */ +#define OR_SCY_7_CLK 0x00000070 /* 7 clock cycles wait states */ +#define OR_SCY_8_CLK 0x00000080 /* 8 clock cycles wait states */ +#define OR_SCY_9_CLK 0x00000090 /* 9 clock cycles wait states */ +#define OR_SCY_10_CLK 0x000000a0 /* 10 clock cycles wait states */ +#define OR_SCY_11_CLK 0x000000b0 /* 11 clock cycles wait states */ +#define OR_SCY_12_CLK 0x000000c0 /* 12 clock cycles wait states */ +#define OR_SCY_13_CLK 0x000000d0 /* 13 clock cycles wait states */ +#define OR_SCY_14_CLK 0x000000e0 /* 14 clock cycles wait states */ +#define OR_SCY_15_CLK 0x000000f0 /* 15 clock cycles wait states */ +#define OR_SETA 0x00000008 /* External Transfer Acknowledge */ +#define OR_TRLX 0x00000004 /* Timing Relaxed */ +#define OR_EHTR 0x00000002 /* Extended Hold Time on Read */ + +/* System Integration Timers. +*/ +typedef struct sys_int_timers { + ushort sit_tbscr; + char res0[0x02]; + uint sit_tbreff0; + uint sit_tbreff1; + char res1[0x14]; + ushort sit_rtcsc; + char res2[0x02]; + uint sit_rtc; + uint sit_rtsec; + uint sit_rtcal; + char res3[0x10]; + ushort sit_piscr; + char res4[2]; + uint sit_pitc; + uint sit_pitr; + char res5[0x34]; +} sit8xx_t; + +#define TBSCR_TBIRQ_MASK ((ushort)0xff00) +#define TBSCR_REFA ((ushort)0x0080) +#define TBSCR_REFB ((ushort)0x0040) +#define TBSCR_REFAE ((ushort)0x0008) +#define TBSCR_REFBE ((ushort)0x0004) +#define TBSCR_TBF ((ushort)0x0002) +#define TBSCR_TBE ((ushort)0x0001) + +#define RTCSC_RTCIRQ_MASK ((ushort)0xff00) +#define RTCSC_SEC ((ushort)0x0080) +#define RTCSC_ALR ((ushort)0x0040) +#define RTCSC_38K ((ushort)0x0010) +#define RTCSC_SIE ((ushort)0x0008) +#define RTCSC_ALE ((ushort)0x0004) +#define RTCSC_RTF ((ushort)0x0002) +#define RTCSC_RTE ((ushort)0x0001) + +#define PISCR_PIRQ_MASK ((ushort)0xff00) +#define PISCR_PS ((ushort)0x0080) +#define PISCR_PIE ((ushort)0x0004) +#define PISCR_PTF ((ushort)0x0002) +#define PISCR_PTE ((ushort)0x0001) + +/* Clocks and Reset. +*/ +typedef struct clk_and_reset { + uint car_sccr; + uint car_plprcr; + uint car_rsr; + char res[0x74]; /* Reserved area */ +} car8xx_t; + +/* System Integration Timers keys. +*/ +typedef struct sitk { + uint sitk_tbscrk; + uint sitk_tbreff0k; + uint sitk_tbreff1k; + uint sitk_tbk; + char res1[0x10]; + uint sitk_rtcsck; + uint sitk_rtck; + uint sitk_rtseck; + uint sitk_rtcalk; + char res2[0x10]; + uint sitk_piscrk; + uint sitk_pitck; + char res3[0x38]; +} sitk8xx_t; + +/* Clocks and reset keys. +*/ +typedef struct cark { + uint cark_sccrk; + uint cark_plprcrk; + uint cark_rsrk; + char res[0x474]; +} cark8xx_t; + +/* The key to unlock registers maintained by keep-alive power. +*/ +#define KAPWR_KEY ((unsigned int)0x55ccaa33) + +/* Video interface. MPC823 Only. +*/ +typedef struct vid823 { + ushort vid_vccr; + ushort res1; + u_char vid_vsr; + u_char res2; + u_char vid_vcmr; + u_char res3; + uint vid_vbcb; + uint res4; + uint vid_vfcr0; + uint vid_vfaa0; + uint vid_vfba0; + uint vid_vfcr1; + uint vid_vfaa1; + uint vid_vfba1; + u_char res5[0x18]; +} vid823_t; + +/* LCD interface. 823 Only. +*/ +typedef struct lcd { + uint lcd_lccr; + uint lcd_lchcr; + uint lcd_lcvcr; + char res1[4]; + uint lcd_lcfaa; + uint lcd_lcfba; + char lcd_lcsr; + char res2[0x7]; +} lcd823_t; + +/* I2C +*/ +typedef struct i2c { + u_char i2c_i2mod; + char res1[3]; + u_char i2c_i2add; + char res2[3]; + u_char i2c_i2brg; + char res3[3]; + u_char i2c_i2com; + char res4[3]; + u_char i2c_i2cer; + char res5[3]; + u_char i2c_i2cmr; + char res6[0x8b]; +} i2c8xx_t; + +/* DMA control/status registers. +*/ +typedef struct sdma_csr { + char res1[4]; + uint sdma_sdar; + u_char sdma_sdsr; + char res3[3]; + u_char sdma_sdmr; + char res4[3]; + u_char sdma_idsr1; + char res5[3]; + u_char sdma_idmr1; + char res6[3]; + u_char sdma_idsr2; + char res7[3]; + u_char sdma_idmr2; + char res8[0x13]; +} sdma8xx_t; + +/* Communication Processor Module Interrupt Controller. +*/ +typedef struct cpm_ic { + ushort cpic_civr; + char res[0xe]; + uint cpic_cicr; + uint cpic_cipr; + uint cpic_cimr; + uint cpic_cisr; +} cpic8xx_t; + +/* Input/Output Port control/status registers. +*/ +typedef struct io_port { + ushort iop_padir; + ushort iop_papar; + ushort iop_paodr; + ushort iop_padat; + char res1[8]; + ushort iop_pcdir; + ushort iop_pcpar; + ushort iop_pcso; + ushort iop_pcdat; + ushort iop_pcint; + char res2[6]; + ushort iop_pddir; + ushort iop_pdpar; + char res3[2]; + ushort iop_pddat; + uint utmode; + char res4[4]; +} iop8xx_t; + +/* Communication Processor Module Timers +*/ +typedef struct cpm_timers { + ushort cpmt_tgcr; + char res1[0xe]; + ushort cpmt_tmr1; + ushort cpmt_tmr2; + ushort cpmt_trr1; + ushort cpmt_trr2; + ushort cpmt_tcr1; + ushort cpmt_tcr2; + ushort cpmt_tcn1; + ushort cpmt_tcn2; + ushort cpmt_tmr3; + ushort cpmt_tmr4; + ushort cpmt_trr3; + ushort cpmt_trr4; + ushort cpmt_tcr3; + ushort cpmt_tcr4; + ushort cpmt_tcn3; + ushort cpmt_tcn4; + ushort cpmt_ter1; + ushort cpmt_ter2; + ushort cpmt_ter3; + ushort cpmt_ter4; + char res2[8]; +} cpmtimer8xx_t; + +/* Finally, the Communication Processor stuff..... +*/ +typedef struct scc { /* Serial communication channels */ + uint scc_gsmrl; + uint scc_gsmrh; + ushort scc_psmr; + char res1[2]; + ushort scc_todr; + ushort scc_dsr; + ushort scc_scce; + char res2[2]; + ushort scc_sccm; + char res3; + u_char scc_sccs; + char res4[8]; +} scc_t; + +typedef struct smc { /* Serial management channels */ + char res1[2]; + ushort smc_smcmr; + char res2[2]; + u_char smc_smce; + char res3[3]; + u_char smc_smcm; + char res4[5]; +} smc_t; + +/* MPC860T Fast Ethernet Controller. It isn't part of the CPM, but + * it fits within the address space. + */ + +typedef struct fec { + uint fec_addr_low; /* lower 32 bits of station address */ + ushort fec_addr_high; /* upper 16 bits of station address */ + ushort res1; /* reserved */ + uint fec_hash_table_high; /* upper 32-bits of hash table */ + uint fec_hash_table_low; /* lower 32-bits of hash table */ + uint fec_r_des_start; /* beginning of Rx descriptor ring */ + uint fec_x_des_start; /* beginning of Tx descriptor ring */ + uint fec_r_buff_size; /* Rx buffer size */ + uint res2[9]; /* reserved */ + uint fec_ecntrl; /* ethernet control register */ + uint fec_ievent; /* interrupt event register */ + uint fec_imask; /* interrupt mask register */ + uint fec_ivec; /* interrupt level and vector status */ + uint fec_r_des_active; /* Rx ring updated flag */ + uint fec_x_des_active; /* Tx ring updated flag */ + uint res3[10]; /* reserved */ + uint fec_mii_data; /* MII data register */ + uint fec_mii_speed; /* MII speed control register */ + uint res4[17]; /* reserved */ + uint fec_r_bound; /* end of RAM (read-only) */ + uint fec_r_fstart; /* Rx FIFO start address */ + uint res5[6]; /* reserved */ + uint fec_x_fstart; /* Tx FIFO start address */ + uint res6[17]; /* reserved */ + uint fec_fun_code; /* fec SDMA function code */ + uint res7[3]; /* reserved */ + uint fec_r_cntrl; /* Rx control register */ + uint fec_r_hash; /* Rx hash register */ + uint res8[14]; /* reserved */ + uint fec_x_cntrl; /* Tx control register */ + uint res9[0x1e]; /* reserved */ +} fec_t; + +/* The FEC and LCD color map share the same address space.... + * I guess we will never see an 823T :-). + */ +union fec_lcd { + fec_t fl_un_fec; + u_char fl_un_cmap[0x200]; +}; + +typedef struct comm_proc { + /* General control and status registers. + */ + ushort cp_cpcr; + u_char res1[2]; + ushort cp_rccr; + u_char res2; + u_char cp_rmds; + u_char res3[4]; + ushort cp_cpmcr1; + ushort cp_cpmcr2; + ushort cp_cpmcr3; + ushort cp_cpmcr4; + u_char res4[2]; + ushort cp_rter; + u_char res5[2]; + ushort cp_rtmr; + u_char res6[0x14]; + + /* Baud rate generators. + */ + uint cp_brgc1; + uint cp_brgc2; + uint cp_brgc3; + uint cp_brgc4; + + /* Serial Communication Channels. + */ + scc_t cp_scc[4]; + + /* Serial Management Channels. + */ + smc_t cp_smc[2]; + + /* Serial Peripheral Interface. + */ + ushort cp_spmode; + u_char res7[4]; + u_char cp_spie; + u_char res8[3]; + u_char cp_spim; + u_char res9[2]; + u_char cp_spcom; + u_char res10[2]; + + /* Parallel Interface Port. + */ + u_char res11[2]; + ushort cp_pipc; + u_char res12[2]; + ushort cp_ptpr; + uint cp_pbdir; + uint cp_pbpar; + u_char res13[2]; + ushort cp_pbodr; + uint cp_pbdat; + + /* Port E - MPC87x/88x only. + */ + uint cp_pedir; + uint cp_pepar; + uint cp_peso; + uint cp_peodr; + uint cp_pedat; + + /* Communications Processor Timing Register - + Contains RMII Timing for the FECs on MPC87x/88x only. + */ + uint cp_cptr; + + /* Serial Interface and Time Slot Assignment. + */ + uint cp_simode; + u_char cp_sigmr; + u_char res15; + u_char cp_sistr; + u_char cp_sicmr; + u_char res16[4]; + uint cp_sicr; + uint cp_sirp; + u_char res17[0xc]; + + /* 256 bytes of MPC823 video controller RAM array. + */ + u_char cp_vcram[0x100]; + u_char cp_siram[0x200]; + + /* The fast ethernet controller is not really part of the CPM, + * but it resides in the address space. + * The LCD color map is also here. + */ + union fec_lcd fl_un; +#define cp_fec fl_un.fl_un_fec +#define lcd_cmap fl_un.fl_un_cmap + char res18[0xE00]; + + /* The DUET family has a second FEC here */ + fec_t cp_fec2; +#define cp_fec1 cp_fec /* consistency macro */ + + /* Dual Ported RAM follows. + * There are many different formats for this memory area + * depending upon the devices used and options chosen. + * Some processors don't have all of it populated. + */ + u_char cp_dpmem[0x1C00]; /* BD / Data / ucode */ + u_char cp_dparam[0x400]; /* Parameter RAM */ +} cpm8xx_t; + +/* Internal memory map. +*/ +typedef struct immap { + sysconf8xx_t im_siu_conf; /* SIU Configuration */ + pcmconf8xx_t im_pcmcia; /* PCMCIA Configuration */ + memctl8xx_t im_memctl; /* Memory Controller */ + sit8xx_t im_sit; /* System integration timers */ + car8xx_t im_clkrst; /* Clocks and reset */ + sitk8xx_t im_sitk; /* Sys int timer keys */ + cark8xx_t im_clkrstk; /* Clocks and reset keys */ + vid823_t im_vid; /* Video (823 only) */ + lcd823_t im_lcd; /* LCD (823 only) */ + i2c8xx_t im_i2c; /* I2C control/status */ + sdma8xx_t im_sdma; /* SDMA control/status */ + cpic8xx_t im_cpic; /* CPM Interrupt Controller */ + iop8xx_t im_ioport; /* IO Port control/status */ + cpmtimer8xx_t im_cpmtimer; /* CPM timers */ + cpm8xx_t im_cpm; /* Communication processor */ +} immap_t; + +#endif /* __IMMAP_8XX__ */ +#endif /* __KERNEL__ */ diff --git a/include/asm-powerpc/commproc.h b/include/asm-powerpc/commproc.h new file mode 100644 index 00000000000..397248705e0 --- /dev/null +++ b/include/asm-powerpc/commproc.h @@ -0,0 +1,692 @@ +/* + * MPC8xx Communication Processor Module. + * Copyright (c) 1997 Dan Malek (dmalek@jlc.net) + * + * This file contains structures and information for the communication + * processor channels. Some CPM control and status is available + * throught the MPC8xx internal memory map. See immap.h for details. + * This file only contains what I need for the moment, not the total + * CPM capabilities. I (or someone else) will add definitions as they + * are needed. -- Dan + * + * On the MBX board, EPPC-Bug loads CPM microcode into the first 512 + * bytes of the DP RAM and relocates the I2C parameter area to the + * IDMA1 space. The remaining DP RAM is available for buffer descriptors + * or other use. + */ +#ifndef __CPM_8XX__ +#define __CPM_8XX__ + +#include <asm/8xx_immap.h> +#include <asm/ptrace.h> + +/* CPM Command register. +*/ +#define CPM_CR_RST ((ushort)0x8000) +#define CPM_CR_OPCODE ((ushort)0x0f00) +#define CPM_CR_CHAN ((ushort)0x00f0) +#define CPM_CR_FLG ((ushort)0x0001) + +/* Some commands (there are more...later) +*/ +#define CPM_CR_INIT_TRX ((ushort)0x0000) +#define CPM_CR_INIT_RX ((ushort)0x0001) +#define CPM_CR_INIT_TX ((ushort)0x0002) +#define CPM_CR_HUNT_MODE ((ushort)0x0003) +#define CPM_CR_STOP_TX ((ushort)0x0004) +#define CPM_CR_GRA_STOP_TX ((ushort)0x0005) +#define CPM_CR_RESTART_TX ((ushort)0x0006) +#define CPM_CR_CLOSE_RX_BD ((ushort)0x0007) +#define CPM_CR_SET_GADDR ((ushort)0x0008) +#define CPM_CR_SET_TIMER CPM_CR_SET_GADDR + +/* Channel numbers. +*/ +#define CPM_CR_CH_SCC1 ((ushort)0x0000) +#define CPM_CR_CH_I2C ((ushort)0x0001) /* I2C and IDMA1 */ +#define CPM_CR_CH_SCC2 ((ushort)0x0004) +#define CPM_CR_CH_SPI ((ushort)0x0005) /* SPI / IDMA2 / Timers */ +#define CPM_CR_CH_TIMER CPM_CR_CH_SPI +#define CPM_CR_CH_SCC3 ((ushort)0x0008) +#define CPM_CR_CH_SMC1 ((ushort)0x0009) /* SMC1 / DSP1 */ +#define CPM_CR_CH_SCC4 ((ushort)0x000c) +#define CPM_CR_CH_SMC2 ((ushort)0x000d) /* SMC2 / DSP2 */ + +#define mk_cr_cmd(CH, CMD) ((CMD << 8) | (CH << 4)) + +/* The dual ported RAM is multi-functional. Some areas can be (and are + * being) used for microcode. There is an area that can only be used + * as data ram for buffer descriptors, which is all we use right now. + * Currently the first 512 and last 256 bytes are used for microcode. + */ +#define CPM_DATAONLY_BASE ((uint)0x0800) +#define CPM_DATAONLY_SIZE ((uint)0x0700) +#define CPM_DP_NOSPACE ((uint)0x7fffffff) + +/* Export the base address of the communication processor registers + * and dual port ram. + */ +extern cpm8xx_t *cpmp; /* Pointer to comm processor */ +extern unsigned long cpm_dpalloc(uint size, uint align); +extern int cpm_dpfree(unsigned long offset); +extern unsigned long cpm_dpalloc_fixed(unsigned long offset, uint size, uint align); +extern void cpm_dpd |