diff options
103 files changed, 3348 insertions, 517 deletions
diff --git a/Documentation/pti/pti_intel_mid.txt b/Documentation/pti/pti_intel_mid.txt new file mode 100644 index 00000000000..e7a5b6d1f7a --- /dev/null +++ b/Documentation/pti/pti_intel_mid.txt @@ -0,0 +1,99 @@ +The Intel MID PTI project is HW implemented in Intel Atom +system-on-a-chip designs based on the Parallel Trace +Interface for MIPI P1149.7 cJTAG standard. The kernel solution +for this platform involves the following files: + +./include/linux/pti.h +./drivers/.../n_tracesink.h +./drivers/.../n_tracerouter.c +./drivers/.../n_tracesink.c +./drivers/.../pti.c + +pti.c is the driver that enables various debugging features +popular on platforms from certain mobile manufacturers. +n_tracerouter.c and n_tracesink.c allow extra system information to +be collected and routed to the pti driver, such as trace +debugging data from a modem. Although n_tracerouter +and n_tracesink are a part of the complete PTI solution, +these two line disciplines can work separately from +pti.c and route any data stream from one /dev/tty node +to another /dev/tty node via kernel-space. This provides +a stable, reliable connection that will not break unless +the user-space application shuts down (plus avoids +kernel->user->kernel context switch overheads of routing +data). + +An example debugging usage for this driver system: + *Hook /dev/ttyPTI0 to syslogd. Opening this port will also start + a console device to further capture debugging messages to PTI. + *Hook /dev/ttyPTI1 to modem debugging data to write to PTI HW. + This is where n_tracerouter and n_tracesink are used. + *Hook /dev/pti to a user-level debugging application for writing + to PTI HW. + *Use mipi_* Kernel Driver API in other device drivers for + debugging to PTI by first requesting a PTI write address via + mipi_request_masterchannel(1). + +Below is example pseudo-code on how a 'privileged' application +can hook up n_tracerouter and n_tracesink to any tty on +a system. 'Privileged' means the application has enough +privileges to successfully manipulate the ldisc drivers +but is not just blindly executing as 'root'. Keep in mind +the use of ioctl(,TIOCSETD,) is not specific to the n_tracerouter +and n_tracesink line discpline drivers but is a generic +operation for a program to use a line discpline driver +on a tty port other than the default n_tty. + +/////////// To hook up n_tracerouter and n_tracesink ///////// + +// Note that n_tracerouter depends on n_tracesink. +#include <errno.h> +#define ONE_TTY "/dev/ttyOne" +#define TWO_TTY "/dev/ttyTwo" + +// needed global to hand onto ldisc connection +static int g_fd_source = -1; +static int g_fd_sink = -1; + +// these two vars used to grab LDISC values from loaded ldisc drivers +// in OS. Look at /proc/tty/ldiscs to get the right numbers from +// the ldiscs loaded in the system. +int source_ldisc_num, sink_ldisc_num = -1; +int retval; + +g_fd_source = open(ONE_TTY, O_RDWR); // must be R/W +g_fd_sink = open(TWO_TTY, O_RDWR); // must be R/W + +if (g_fd_source <= 0) || (g_fd_sink <= 0) { + // doubt you'll want to use these exact error lines of code + printf("Error on open(). errno: %d\n",errno); + return errno; +} + +retval = ioctl(g_fd_sink, TIOCSETD, &sink_ldisc_num); +if (retval < 0) { + printf("Error on ioctl(). errno: %d\n", errno); + return errno; +} + +retval = ioctl(g_fd_source, TIOCSETD, &source_ldisc_num); +if (retval < 0) { + printf("Error on ioctl(). errno: %d\n", errno); + return errno; +} + +/////////// To disconnect n_tracerouter and n_tracesink //////// + +// First make sure data through the ldiscs has stopped. + +// Second, disconnect ldiscs. This provides a +// little cleaner shutdown on tty stack. +sink_ldisc_num = 0; +source_ldisc_num = 0; +ioctl(g_fd_uart, TIOCSETD, &sink_ldisc_num); +ioctl(g_fd_gadget, TIOCSETD, &source_ldisc_num); + +// Three, program closes connection, and cleanup: +close(g_fd_uart); +close(g_fd_gadget); +g_fd_uart = g_fd_gadget = NULL; diff --git a/drivers/bluetooth/hci_ldisc.c b/drivers/bluetooth/hci_ldisc.c index 320f71803a2..b3f01996318 100644 --- a/drivers/bluetooth/hci_ldisc.c +++ b/drivers/bluetooth/hci_ldisc.c @@ -355,26 +355,29 @@ static void hci_uart_tty_wakeup(struct tty_struct *tty) * flags pointer to flags for data * count count of received data in bytes * - * Return Value: None + * Return Value: Number of bytes received */ -static void hci_uart_tty_receive(struct tty_struct *tty, const u8 *data, char *flags, int count) +static unsigned int hci_uart_tty_receive(struct tty_struct *tty, + const u8 *data, char *flags, int count) { - int ret; struct hci_uart *hu = (void *)tty->disc_data; + int received; if (!hu || tty != hu->tty) - return; + return -ENODEV; if (!test_bit(HCI_UART_PROTO_SET, &hu->flags)) - return; + return -EINVAL; spin_lock(&hu->rx_lock); - ret = hu->proto->recv(hu, (void *) data, count); - if (ret > 0) - hu->hdev->stat.byte_rx += count; + received = hu->proto->recv(hu, (void *) data, count); + if (received > 0) + hu->hdev->stat.byte_rx += received; spin_unlock(&hu->rx_lock); tty_unthrottle(tty); + + return received; } static int hci_uart_register_dev(struct hci_uart *hu) diff --git a/drivers/input/serio/serport.c b/drivers/input/serio/serport.c index 8755f5f3ad3..f3698967edf 100644 --- a/drivers/input/serio/serport.c +++ b/drivers/input/serio/serport.c @@ -120,17 +120,21 @@ static void serport_ldisc_close(struct tty_struct *tty) * 'interrupt' routine. */ -static void serport_ldisc_receive(struct tty_struct *tty, const unsigned char *cp, char *fp, int count) +static unsigned int serport_ldisc_receive(struct tty_struct *tty, + const unsigned char *cp, char *fp, int count) { struct serport *serport = (struct serport*) tty->disc_data; unsigned long flags; unsigned int ch_flags; + int ret = 0; int i; spin_lock_irqsave(&serport->lock, flags); - if (!test_bit(SERPORT_ACTIVE, &serport->flags)) + if (!test_bit(SERPORT_ACTIVE, &serport->flags)) { + ret = -EINVAL; goto out; + } for (i = 0; i < count; i++) { switch (fp[i]) { @@ -152,6 +156,8 @@ static void serport_ldisc_receive(struct tty_struct *tty, const unsigned char *c out: spin_unlock_irqrestore(&serport->lock, flags); + + return ret == 0 ? count : ret; } /* diff --git a/drivers/isdn/gigaset/ser-gigaset.c b/drivers/isdn/gigaset/ser-gigaset.c index 86a5c4f7775..1d44d470897 100644 --- a/drivers/isdn/gigaset/ser-gigaset.c +++ b/drivers/isdn/gigaset/ser-gigaset.c @@ -674,7 +674,7 @@ gigaset_tty_ioctl(struct tty_struct *tty, struct file *file, * cflags buffer containing error flags for received characters (ignored) * count number of received characters */ -static void +static unsigned int gigaset_tty_receive(struct tty_struct *tty, const unsigned char *buf, char *cflags, int count) { @@ -683,12 +683,12 @@ gigaset_tty_receive(struct tty_struct *tty, const unsigned char *buf, struct inbuf_t *inbuf; if (!cs) - return; + return -ENODEV; inbuf = cs->inbuf; if (!inbuf) { dev_err(cs->dev, "%s: no inbuf\n", __func__); cs_put(cs); - return; + return -EINVAL; } tail = inbuf->tail; @@ -725,6 +725,8 @@ gigaset_tty_receive(struct tty_struct *tty, const unsigned char *buf, gig_dbg(DEBUG_INTR, "%s-->BH", __func__); gigaset_schedule_event(cs); cs_put(cs); + + return count; } /* diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig index d80dcdee88f..4e349cd98bc 100644 --- a/drivers/misc/Kconfig +++ b/drivers/misc/Kconfig @@ -144,6 +144,19 @@ config PHANTOM If you choose to build module, its name will be phantom. If unsure, say N here. +config INTEL_MID_PTI + tristate "Parallel Trace Interface for MIPI P1149.7 cJTAG standard" + default n + help + The PTI (Parallel Trace Interface) driver directs + trace data routed from various parts in the system out + through an Intel Penwell PTI port and out of the mobile + device for analysis with a debugging tool (Lauterbach or Fido). + + You should select this driver if the target kernel is meant for + an Intel Atom (non-netbook) mobile device containing a MIPI + P1149.7 standard implementation. + config SGI_IOC4 tristate "SGI IOC4 Base IO support" depends on PCI @@ -459,7 +472,7 @@ config BMP085 module will be called bmp085. config PCH_PHUB - tristate "PCH Packet Hub of Intel Topcliff / OKI SEMICONDUCTOR ML7213" + tristate "Intel EG20T PCH / OKI SEMICONDUCTOR IOH(ML7213/ML7223) PHUB" depends on PCI help This driver is for PCH(Platform controller Hub) PHUB(Packet Hub) of @@ -467,10 +480,12 @@ config PCH_PHUB processor. The Topcliff has MAC address and Option ROM data in SROM. This driver can access MAC address and Option ROM data in SROM. - This driver also can be used for OKI SEMICONDUCTOR's ML7213 which is - for IVI(In-Vehicle Infotainment) use. - ML7213 is companion chip for Intel Atom E6xx series. - ML7213 is completely compatible for Intel EG20T PCH. + This driver also can be used for OKI SEMICONDUCTOR IOH(Input/ + Output Hub), ML7213 and ML7223. + ML7213 IOH is for IVI(In-Vehicle Infotainment) use and ML7223 IOH is + for MP(Media Phone) use. + ML7213/ML7223 is companion chip for Intel Atom E6xx series. + ML7213/ML7223 is completely compatible for Intel EG20T PCH. To compile this driver as a module, choose M here: the module will be called pch_phub. diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile index 848e8464faa..5f03172cc0b 100644 --- a/drivers/misc/Makefile +++ b/drivers/misc/Makefile @@ -6,6 +6,7 @@ obj-$(CONFIG_IBM_ASM) += ibmasm/ obj-$(CONFIG_AD525X_DPOT) += ad525x_dpot.o obj-$(CONFIG_AD525X_DPOT_I2C) += ad525x_dpot-i2c.o |