diff options
25 files changed, 17328 insertions, 0 deletions
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index b199456a736..555b3ad6609 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -2389,6 +2389,24 @@ config CHELSIO_T1_NAPI NAPI is a driver API designed to reduce CPU and interrupt load when the driver is receiving lots of packets from the card. +config CHELSIO_T3 + tristate "Chelsio Communications T3 10Gb Ethernet support" + depends on PCI + help + This driver supports Chelsio T3-based gigabit and 10Gb Ethernet + adapters. + + For general information about Chelsio and our products, visit + our website at <http://www.chelsio.com>. + + For customer support, please visit our customer support page at + <http://www.chelsio.com/support.htm>. + + Please send feedback to <linux-bugs@chelsio.com>. + + To compile this driver as a module, choose M here: the module + will be called cxgb3. + config EHEA tristate "eHEA Ethernet support" depends on IBMEBUS diff --git a/drivers/net/Makefile b/drivers/net/Makefile index 6c61f3e7396..88b63369d78 100644 --- a/drivers/net/Makefile +++ b/drivers/net/Makefile @@ -6,6 +6,7 @@ obj-$(CONFIG_E1000) += e1000/ obj-$(CONFIG_IBM_EMAC) += ibm_emac/ obj-$(CONFIG_IXGB) += ixgb/ obj-$(CONFIG_CHELSIO_T1) += chelsio/ +obj-$(CONFIG_CHELSIO_T3) += cxgb3/ obj-$(CONFIG_EHEA) += ehea/ obj-$(CONFIG_BONDING) += bonding/ obj-$(CONFIG_GIANFAR) += gianfar_driver.o diff --git a/drivers/net/cxgb3/Makefile b/drivers/net/cxgb3/Makefile new file mode 100644 index 00000000000..34346798532 --- /dev/null +++ b/drivers/net/cxgb3/Makefile @@ -0,0 +1,8 @@ +# +# Chelsio T3 driver +# + +obj-$(CONFIG_CHELSIO_T3) += cxgb3.o + +cxgb3-objs := cxgb3_main.o ael1002.o vsc8211.o t3_hw.o mc5.o \ + xgmac.o sge.o l2t.o cxgb3_offload.o diff --git a/drivers/net/cxgb3/adapter.h b/drivers/net/cxgb3/adapter.h new file mode 100644 index 00000000000..16643f6d00a --- /dev/null +++ b/drivers/net/cxgb3/adapter.h @@ -0,0 +1,255 @@ +/* + * This file is part of the Chelsio T3 Ethernet driver for Linux. + * + * Copyright (C) 2003-2006 Chelsio Communications. All rights reserved. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the LICENSE file included in this + * release for licensing terms and conditions. + */ + +/* This file should not be included directly. Include common.h instead. */ + +#ifndef __T3_ADAPTER_H__ +#define __T3_ADAPTER_H__ + +#include <linux/pci.h> +#include <linux/spinlock.h> +#include <linux/interrupt.h> +#include <linux/timer.h> +#include <linux/cache.h> +#include "t3cdev.h" +#include <asm/semaphore.h> +#include <asm/bitops.h> +#include <asm/io.h> + +typedef irqreturn_t(*intr_handler_t) (int, void *); + +struct vlan_group; + +struct port_info { + struct vlan_group *vlan_grp; + const struct port_type_info *port_type; + u8 port_id; + u8 rx_csum_offload; + u8 nqsets; + u8 first_qset; + struct cphy phy; + struct cmac mac; + struct link_config link_config; + struct net_device_stats netstats; + int activity; +}; + +enum { /* adapter flags */ + FULL_INIT_DONE = (1 << 0), + USING_MSI = (1 << 1), + USING_MSIX = (1 << 2), +}; + +struct rx_desc; +struct rx_sw_desc; + +struct sge_fl { /* SGE per free-buffer list state */ + unsigned int buf_size; /* size of each Rx buffer */ + unsigned int credits; /* # of available Rx buffers */ + unsigned int size; /* capacity of free list */ + unsigned int cidx; /* consumer index */ + unsigned int pidx; /* producer index */ + unsigned int gen; /* free list generation */ + struct rx_desc *desc; /* address of HW Rx descriptor ring */ + struct rx_sw_desc *sdesc; /* address of SW Rx descriptor ring */ + dma_addr_t phys_addr; /* physical address of HW ring start */ + unsigned int cntxt_id; /* SGE context id for the free list */ + unsigned long empty; /* # of times queue ran out of buffers */ +}; + +/* + * Bundle size for grouping offload RX packets for delivery to the stack. + * Don't make this too big as we do prefetch on each packet in a bundle. + */ +# define RX_BUNDLE_SIZE 8 + +struct rsp_desc; + +struct sge_rspq { /* state for an SGE response queue */ + unsigned int credits; /* # of pending response credits */ + unsigned int size; /* capacity of response queue */ + unsigned int cidx; /* consumer index */ + unsigned int gen; /* current generation bit */ + unsigned int polling; /* is the queue serviced through NAPI? */ + unsigned int holdoff_tmr; /* interrupt holdoff timer in 100ns */ + unsigned int next_holdoff; /* holdoff time for next interrupt */ + struct rsp_desc *desc; /* address of HW response ring */ + dma_addr_t phys_addr; /* physical address of the ring */ + unsigned int cntxt_id; /* SGE context id for the response q */ + spinlock_t lock; /* guards response processing */ + struct sk_buff *rx_head; /* offload packet receive queue head */ + struct sk_buff *rx_tail; /* offload packet receive queue tail */ + + unsigned long offload_pkts; + unsigned long offload_bundles; + unsigned long eth_pkts; /* # of ethernet packets */ + unsigned long pure_rsps; /* # of pure (non-data) responses */ + unsigned long imm_data; /* responses with immediate data */ + unsigned long rx_drops; /* # of packets dropped due to no mem */ + unsigned long async_notif; /* # of asynchronous notification events */ + unsigned long empty; /* # of times queue ran out of credits */ + unsigned long nomem; /* # of responses deferred due to no mem */ + unsigned long unhandled_irqs; /* # of spurious intrs */ +}; + +struct tx_desc; +struct tx_sw_desc; + +struct sge_txq { /* state for an SGE Tx queue */ + unsigned long flags; /* HW DMA fetch status */ + unsigned int in_use; /* # of in-use Tx descriptors */ + unsigned int size; /* # of descriptors */ + unsigned int processed; /* total # of descs HW has processed */ + unsigned int cleaned; /* total # of descs SW has reclaimed */ + unsigned int stop_thres; /* SW TX queue suspend threshold */ + unsigned int cidx; /* consumer index */ + unsigned int pidx; /* producer index */ + unsigned int gen; /* current value of generation bit */ + unsigned int unacked; /* Tx descriptors used since last COMPL */ + struct tx_desc *desc; /* address of HW Tx descriptor ring */ + struct tx_sw_desc *sdesc; /* address of SW Tx descriptor ring */ + spinlock_t lock; /* guards enqueueing of new packets */ + unsigned int token; /* WR token */ + dma_addr_t phys_addr; /* physical address of the ring */ + struct sk_buff_head sendq; /* List of backpressured offload packets */ + struct tasklet_struct qresume_tsk; /* restarts the queue */ + unsigned int cntxt_id; /* SGE context id for the Tx q */ + unsigned long stops; /* # of times q has been stopped */ + unsigned long restarts; /* # of queue restarts */ +}; + +enum { /* per port SGE statistics */ + SGE_PSTAT_TSO, /* # of TSO requests */ + SGE_PSTAT_RX_CSUM_GOOD, /* # of successful RX csum offloads */ + SGE_PSTAT_TX_CSUM, /* # of TX checksum offloads */ + SGE_PSTAT_VLANEX, /* # of VLAN tag extractions */ + SGE_PSTAT_VLANINS, /* # of VLAN tag insertions */ + + SGE_PSTAT_MAX /* must be last */ +}; + +struct sge_qset { /* an SGE queue set */ + struct sge_rspq rspq; + struct sge_fl fl[SGE_RXQ_PER_SET]; + struct sge_txq txq[SGE_TXQ_PER_SET]; + struct net_device *netdev; /* associated net device */ + unsigned long txq_stopped; /* which Tx queues are stopped */ + struct timer_list tx_reclaim_timer; /* reclaims TX buffers */ + unsigned long port_stats[SGE_PSTAT_MAX]; +} ____cacheline_aligned; + +struct sge { + struct sge_qset qs[SGE_QSETS]; + spinlock_t reg_lock; /* guards non-atomic SGE registers (eg context) */ +}; + +struct adapter { + struct t3cdev tdev; + struct list_head adapter_list; + void __iomem *regs; + struct pci_dev *pdev; + unsigned long registered_device_map; + unsigned long open_device_map; + unsigned long flags; + + const char *name; + int msg_enable; + unsigned int mmio_len; + + struct adapter_params params; + unsigned int slow_intr_mask; + unsigned long irq_stats[IRQ_NUM_STATS]; + + struct { + unsigned short vec; + char desc[22]; + } msix_info[SGE_QSETS + 1]; + + /* T3 modules */ + struct sge sge; + struct mc7 pmrx; + struct mc7 pmtx; + struct mc7 cm; + struct mc5 mc5; + + struct net_device *port[MAX_NPORTS]; + unsigned int check_task_cnt; + struct delayed_work adap_check_task; + struct work_struct ext_intr_handler_task; + + /* + * Dummy netdevices are needed when using multiple receive queues with + * NAPI as each netdevice can service only one queue. + */ + struct net_device *dummy_netdev[SGE_QSETS - 1]; + + struct dentry *debugfs_root; + + struct mutex mdio_lock; + spinlock_t stats_lock; + spinlock_t work_lock; +}; + +static inline u32 t3_read_reg(struct adapter *adapter, u32 reg_addr) +{ + u32 val = readl(adapter->regs + reg_addr); + + CH_DBG(adapter, MMIO, "read register 0x%x value 0x%x\n", reg_addr, val); + return val; +} + +static inline void t3_write_reg(struct adapter *adapter, u32 reg_addr, u32 val) +{ + CH_DBG(adapter, MMIO, "setting register 0x%x to 0x%x\n", reg_addr, val); + writel(val, adapter->regs + reg_addr); +} + +static inline struct port_info *adap2pinfo(struct adapter *adap, int idx) +{ + return netdev_priv(adap->port[idx]); +} + +/* + * We use the spare atalk_ptr to map a net device to its SGE queue set. + * This is a macro so it can be used as l-value. + */ +#define dev2qset(netdev) ((netdev)->atalk_ptr) + +#define OFFLOAD_DEVMAP_BIT 15 + +#define tdev2adap(d) container_of(d, struct adapter, tdev) + +static inline int offload_running(struct adapter *adapter) +{ + return test_bit(OFFLOAD_DEVMAP_BIT, &adapter->open_device_map); +} + +int t3_offload_tx(struct t3cdev *tdev, struct sk_buff *skb); + +void t3_os_ext_intr_handler(struct adapter *adapter); +void t3_os_link_changed(struct adapter *adapter, int port_id, int link_status, + int speed, int duplex, int fc); + +void t3_sge_start(struct adapter *adap); +void t3_sge_stop(struct adapter *adap); +void t3_free_sge_resources(struct adapter *adap); +void t3_sge_err_intr_handler(struct adapter *adapter); +intr_handler_t t3_intr_handler(struct adapter *adap, int polling); +int t3_eth_xmit(struct sk_buff *skb, struct net_device *dev); +void t3_update_qset_coalesce(struct sge_qset *qs, const struct qset_params *p); +int t3_sge_alloc_qset(struct adapter *adapter, unsigned int id, int nports, + int irq_vec_idx, const struct qset_params *p, + int ntxq, struct net_device *netdev); +int t3_get_desc(const struct sge_qset *qs, unsigned int qnum, unsigned int idx, + unsigned char *data); +irqreturn_t t3_sge_intr_msix(int irq, void *cookie); + +#endif /* __T3_ADAPTER_H__ */ diff --git a/drivers/net/cxgb3/ael1002.c b/drivers/net/cxgb3/ael1002.c new file mode 100644 index 00000000000..93a90d825d8 --- /dev/null +++ b/drivers/net/cxgb3/ael1002.c @@ -0,0 +1,231 @@ +/* + * This file is part of the Chelsio T3 Ethernet driver. + * + * Copyright (C) 2005-2006 Chelsio Communications. All rights reserved. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the LICENSE file included in this + * release for licensing terms and conditions. + */ + +#include "common.h" +#include "regs.h" + +enum { + AEL100X_TX_DISABLE = 9, + AEL100X_TX_CONFIG1 = 0xc002, + AEL1002_PWR_DOWN_HI = 0xc011, + AEL1002_PWR_DOWN_LO = 0xc012, + AEL1002_XFI_EQL = 0xc015, + AEL1002_LB_EN = 0xc017, + + LASI_CTRL = 0x9002, + LASI_STAT = 0x9005 +}; + +static void ael100x_txon(struct cphy *phy) +{ + int tx_on_gpio = phy->addr == 0 ? F_GPIO7_OUT_VAL : F_GPIO2_OUT_VAL; + + msleep(100); + t3_set_reg_field(phy->adapter, A_T3DBG_GPIO_EN, 0, tx_on_gpio); + msleep(30); +} + +static int ael1002_power_down(struct cphy *phy, int enable) +{ + int err; + + err = mdio_write(phy, MDIO_DEV_PMA_PMD, AEL100X_TX_DISABLE, !!enable); + if (!err) + err = t3_mdio_change_bits(phy, MDIO_DEV_PMA_PMD, MII_BMCR, + BMCR_PDOWN, enable ? BMCR_PDOWN : 0); + return err; +} + +static int ael1002_reset(struct cphy *phy, int wait) +{ + int err; + + if ((err = ael1002_power_down(phy, 0)) || + (err = mdio_write(phy, MDIO_DEV_PMA_PMD, AEL100X_TX_CONFIG1, 1)) || + (err = mdio_write(phy, MDIO_DEV_PMA_PMD, AEL1002_PWR_DOWN_HI, 0)) || + (err = mdio_write(phy, MDIO_DEV_PMA_PMD, AEL1002_PWR_DOWN_LO, 0)) || + (err = mdio_write(phy, MDIO_DEV_PMA_PMD, AEL1002_XFI_EQL, 0x18)) || + (err = t3_mdio_change_bits(phy, MDIO_DEV_PMA_PMD, AEL1002_LB_EN, + 0, 1 << 5))) + return err; + return 0; +} + +static int ael1002_intr_noop(struct cphy *phy) +{ + return 0; +} + +static int ael100x_get_link_status(struct cphy *phy, int *link_ok, + int *speed, int *duplex, int *fc) +{ + if (link_ok) { + unsigned int status; + int err = mdio_read(phy, MDIO_DEV_PMA_PMD, MII_BMSR, &status); + + /* + * BMSR_LSTATUS is latch-low, so if it is 0 we need to read it + * once more to get the current link state. + */ + if (!err && !(status & BMSR_LSTATUS)) + err = mdio_read(phy, MDIO_DEV_PMA_PMD, MII_BMSR, + &status); + if (err) + return err; + *link_ok = !!(status & BMSR_LSTATUS); + } + if (speed) + *speed = SPEED_10000; + if (duplex) + *duplex = DUPLEX_FULL; + return 0; +} + +static struct cphy_ops ael1002_ops = { + .reset = ael1002_reset, + .intr_enable = ael1002_intr_noop, + .intr_disable = ael1002_intr_noop, + .intr_clear = ael1002_intr_noop, + .intr_handler = ael1002_intr_noop, + .get_link_status = ael100x_get_link_status, + .power_down = ael1002_power_down, +}; + +void t3_ael1002_phy_prep(struct cphy *phy, struct adapter *adapter, + int phy_addr, const struct mdio_ops *mdio_ops) +{ + cphy_init(phy, adapter, phy_addr, &ael1002_ops, mdio_ops); + ael100x_txon(phy); +} + +static int ael1006_reset(struct cphy *phy, int wait) +{ + return t3_phy_reset(phy, MDIO_DEV_PMA_PMD, wait); +} + +static int ael1006_intr_enable(struct cphy *phy) +{ + return mdio_write(phy, MDIO_DEV_PMA_PMD, LASI_CTRL, 1); +} + +static int ael1006_intr_disable(struct cphy *phy) +{ + return mdio_write(phy, MDIO_DEV_PMA_PMD, LASI_CTRL, 0); +} + +static int ael1006_intr_clear(struct cphy *phy) +{ + u32 val; + + return mdio_read(phy, MDIO_DEV_PMA_PMD, LASI_STAT, &val); +} + +static int ael1006_intr_handler(struct cphy *phy) +{ + unsigned int status; + int err = mdio_read(phy, MDIO_DEV_PMA_PMD, LASI_STAT, &status); + + if (err) + return err; + return (status & 1) ? cphy_cause_link_change : 0; +} + +static int ael1006_power_down(struct cphy *phy, int enable) +{ + return t3_mdio_change_bits(phy, MDIO_DEV_PMA_PMD, MII_BMCR, + BMCR_PDOWN, enable ? BMCR_PDOWN : 0); +} + +static struct cphy_ops ael1006_ops = { + .reset = ael1006_reset, + .intr_enable = ael1006_intr_enable, + .intr_disable = ael1006_intr_disable, + .intr_clear = ael1006_intr_clear, + .intr_handler = ael1006_intr_handler, + .get_link_status = ael100x_get_link_status, + .power_down = ael1006_power_down, +}; + +void t3_ael1006_phy_prep(struct cphy *phy, struct adapter *adapter, + int phy_addr, const struct mdio_ops *mdio_ops) +{ + cphy_init(phy, adapter, phy_addr, &ael1006_ops, mdio_ops); + ael100x_txon(phy); +} + +static struct cphy_ops qt2045_ops = { + .reset = ael1006_reset, + .intr_enable = ael1006_intr_enable, + .intr_disable = ael1006_intr_disable, + .intr_clear = ael1006_intr_clear, + .intr_handler = ael1006_intr_handler, + .get_link_status = ael100x_get_link_status, + .power_down = ael1006_power_down, +}; + +void t3_qt2045_phy_prep(struct cphy *phy, struct adapter *adapter, + int phy_addr, const struct mdio_ops *mdio_ops) +{ + unsigned int stat; + + cphy_init(phy, adapter, phy_addr, &qt2045_ops, mdio_ops); + + /* + * Some cards where the PHY is supposed to be at address 0 actually + * have it at 1. + */ + if (!phy_addr && !mdio_read(phy, MDIO_DEV_PMA_PMD, MII_BMSR, &stat) && + stat == 0xffff) + phy->addr = 1; +} + +static int xaui_direct_reset(struct cphy *phy, int wait) +{ + return 0; +} + +static int xaui_direct_get_link_status(struct cphy *phy, int *link_ok, + int *speed, int *duplex, int *fc) +{ + if (link_ok) { + unsigned int status; + + status = t3_read_reg(phy->adapter, + XGM_REG(A_XGM_SERDES_STAT0, phy->addr)); + *link_ok = !(status & F_LOWSIG0); + } + if (speed) + *speed = SPEED_10000; + if (duplex) + *duplex = DUPLEX_FULL; + return 0; +} + +static int xaui_direct_power_down(struct cphy *phy, int enable) +{ + return 0; +} + +static struct cphy_ops xaui_direct_ops = { + .reset = xaui_direct_reset, + .intr_enable = ael1002_intr_noop, + .intr_disable = ael1002_intr_noop, + .intr_clear = ael1002_intr_noop, + .intr_handler = ael1002_intr_noop, + .get_link_status = xaui_direct_get_link_status, + .power_down = xaui_direct_power_down, +}; + +void t3_xaui_direct_phy_prep(struct cphy *phy, struct adapter *adapter, + int phy_addr, const struct mdio_ops *mdio_ops) +{ + cphy_init(phy, adapter, 1, &xaui_direct_ops, mdio_ops); +} diff --git a/drivers/net/cxgb3/common.h b/drivers/net/cxgb3/common.h new file mode 100644 index 00000000000..60a979b62a6 --- /dev/null +++ b/drivers/net/cxgb3/common.h @@ -0,0 +1,709 @@ +/* + * This file is part of the Chelsio T3 Ethernet driver. + * + * Copyright (C) 2005-2006 Chelsio Communications. All rights reserved. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the LICENSE file included in this + * release for licensing terms and conditions. + */ + +#ifndef __CHELSIO_COMMON_H +#define __CHELSIO_COMMON_H + +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/ctype.h> +#include <linux/delay.h> +#include <linux/init.h> +#include <linux/netdevice.h> +#include <linux/ethtool.h> +#include <linux/mii.h> +#include "version.h" + +#define CH_ERR(adap, fmt, ...) dev_err(&adap->pdev->dev, fmt, ## __VA_ARGS__) +#define CH_WARN(adap, fmt, ...) dev_warn(&adap->pdev->dev, fmt, ## __VA_ARGS__) +#define CH_ALERT(adap, fmt, ...) \ + dev_printk(KERN_ALERT, &adap->pdev->dev, fmt, ## __VA_ARGS__) + +/* + * More powerful macro that selectively prints messages based on msg_enable. + * For info and debugging messages. + */ +#define CH_MSG(adapter, level, category, fmt, ...) do { \ + if ((adapter)->msg_enable & NETIF_MSG_##category) \ + dev_printk(KERN_##level, &adapter->pdev->dev, fmt, \ + ## __VA_ARGS__); \ +} while (0) + +#ifdef DEBUG +# define CH_DBG(adapter, category, fmt, ...) \ + CH_MSG(adapter, DEBUG, category, fmt, ## __VA_ARGS__) +#else +# define CH_DBG(adapter, category, fmt, ...) +#endif + +/* Additional NETIF_MSG_* categories */ +#define NETIF_MSG_MMIO 0x8000000 + +struct t3_rx_mode { + struct net_device *dev; + struct dev_mc_list *mclist; + unsigned int idx; +}; + +static inline void init_rx_mode(struct t3_rx_mode *p, struct net_device *dev, + struct dev_mc_list *mclist) +{ + p->dev = dev; + p->mclist = mclist; + p->idx = 0; +} + +static inline u8 *t3_get_next_mcaddr(struct t3_rx_mode *rm) +{ + u8 *addr = NULL; + + if (rm->mclist && rm->idx < rm->dev->mc_count) { + addr = rm->mclist->dmi_addr; + rm->mclist = rm->mclist->next; + rm->idx++; + } + return addr; +} + +enum { + MAX_NPORTS = 2, /* max # of ports */ + MAX_FRAME_SIZE = 10240, /* max MAC frame size, including header + FCS */ + EEPROMSIZE = 8192, /* Serial EEPROM size */ + RSS_TABLE_SIZE = 64, /* size of RSS lookup and mapping tables */ + TCB_SIZE = 128, /* TCB size */ + NMTUS = 16, /* size of MTU table */ + NCCTRL_WIN = 32, /* # of congestion control windows */ +}; + +#define MAX_RX_COALESCING_LEN 16224U + +enum { + PAUSE_RX = 1 << 0, + PAUSE_TX = 1 << 1, + PAUSE_AUTONEG = 1 << 2 +}; + +enum { + SUPPORTED_OFFLOAD = 1 << 24, + SUPPORTED_IRQ = 1 << 25 +}; + +enum { /* adapter interrupt-maintained statistics */ + STAT_ULP_CH0_PBL_OOB, + STAT_ULP_CH1_PBL_OOB, + STAT_PCI_CORR_ECC, + + IRQ_NUM_STATS /* keep last */ +}; + +enum { + SGE_QSETS = 8, /* # of SGE Tx/Rx/RspQ sets */ + SGE_RXQ_PER_SET = 2, /* # of Rx queues per set */ + SGE_TXQ_PER_SET = 3 /* # of Tx queues per set */ +}; + +enum sge_context_type { /* SGE egress context types */ + SGE_CNTXT_RDMA = 0, + SGE_CNTXT_ETH = 2, + SGE_CNTXT_OFLD = 4, + SGE_CNTXT_CTRL = 5 +}; + +enum { + AN_PKT_SIZE = 32, /* async notification packet size */ + IMMED_PKT_SIZE = 48 /* packet size for immediate data */ +}; + +struct sg_ent { /* SGE scatter/gather entry */ + u32 len[2]; + u64 addr[2]; +}; + +#ifndef SGE_NUM_GENBITS +/* Must be 1 or 2 */ +# define SGE_NUM_GENBITS 2 +#endif + +#define TX_DESC_FLITS 16U +#define WR_FLITS (TX_DESC_FLITS + 1 - SGE_NUM_GENBITS) + +struct cphy; +struct adapter; + +struct mdio_ops { + int (*read)(struct adapter *adapter, int phy_addr, int mmd_addr, + int reg_addr, unsigned int *val); + int (*write)(struct adapter *adapter, int phy_addr, int mmd_addr, + int reg_addr, unsigned int val); +}; + +struct adapter_info { + unsigned char nports; /* # of ports */ + unsigned char phy_base_addr; /* MDIO PHY base address */ + unsigned char mdien; + unsigned char mdiinv; + unsigned int gpio_out; /* GPIO output settings */ + unsigned int gpio_intr; /* GPIO IRQ enable mask */ + unsigned long caps; /* adapter capabilities */ + const struct mdio_ops *mdio_ops; /* MDIO operations */ + const char *desc; /* product description */ +}; + +struct port_type_info { + void (*phy_prep)(struct cphy *phy, struct adapter *adapter, + int phy_addr, const struct mdio_ops *ops); + unsigned int caps; + const char *desc; +}; + +struct mc5_stats { + unsigned long parity_err; + unsigned long active_rgn_full; + unsigned long nfa_srch_err; + unsigned long unknown_cmd; + unsigned long reqq_parity_err; + unsigned long dispq_parity_err; + unsigned long del_act_empty; +}; + +struct mc7_stats { + unsigned long corr_err; + unsigned long uncorr_err; + unsigned long parity_err; + unsigned long addr_err; +}; + +struct mac_stats { + u64 tx_octets; /* total # of octets in good frames */ + u64 tx_octets_bad; /* total # of octets in error frames */ + u64 tx_frames; /* all good frames */ + u64 tx_mcast_frames; /* good multicast frames */ + u64 tx_bcast_frames; /* good broadcast frames */ + u64 tx_pause; /* # of transmitted pause frames */ + u64 tx_deferred; /* frames with deferred transmissions */ + u64 tx_late_collisions; /* # of late collisions */ + u64 tx_total_collisions; /* # of total collisions */ + u64 tx_excess_collisions; /* frame errors from excessive collissions */ + u64 tx_underrun; /* # of Tx FIFO underruns */ + u64 tx_len_errs; /* # of Tx length errors */ + u64 tx_mac_internal_errs; /* # of internal MAC errors on Tx */ + u64 tx_excess_deferral; /* # of frames with excessive deferral */ + u64 tx_fcs_errs; /* # of frames with bad FCS */ + + u64 tx_frames_64; /* # of Tx frames in a particular range */ + u64 tx_frames_65_127; + u64 tx_frames_128_255; + u64 tx_frames_256_511; + u64 tx_frames_512_1023; + u64 tx_frames_1024_1518; + u64 tx_frames_1519_max; + + u64 rx_octets; /* total # of octets in good frames */ + u64 rx_octets_bad; /* total # of octets in error frames */ + u64 rx_frames; /* all good frames */ + u64 rx_mcast_frames; /* good multicast frames */ + u64 rx_bcast_frames; /* good broadcast frames */ + u64 rx_pause; /* # of received pause frames */ + u64 rx_fcs_errs; /* # of received frames with bad FCS */ + u64 rx_align_errs; /* alignment errors */ + u64 rx_symbol_errs; /* symbol errors */ + u64 rx_data_errs; /* data errors */ + u64 rx_sequence_errs; /* sequence errors */ + u64 rx_runt; /* # of runt frames */ + u64 rx_jabber; /* # of jabber frames */ + u64 rx_short; /* # of short frames */ + u64 rx_too_long; /* # of oversized frames */ + u64 rx_mac_internal_errs; /* # of internal MAC errors on Rx */ + + u64 rx_frames_64; /* # of Rx frames in a particular range */ + u64 rx_frames_65_127; + u64 rx_frames_128_255; + u64 rx_frames_256_511; + u64 rx_frames_512_1023; + u64 rx_frames_1024_1518; + u64 rx_frames_1519_max; + + u64 rx_cong_drops; /* # of Rx drops due to SGE congestion */ + + unsigned long tx_fifo_parity_err; + unsigned long rx_fifo_parity_err; + unsigned long tx_fifo_urun; + unsigned long rx_fifo_ovfl; + unsigned long serdes_signal_loss; + unsigned long xaui_pcs_ctc_err; + unsigned long xaui_pcs_align_change; +}; + +struct tp_mib_stats { + u32 ipInReceive_hi; + u32 ipInReceive_lo; + u32 ipInHdrErrors_hi; + u32 ipInHdrErrors_lo; + u32 ipInAddrErrors_hi; + u32 ipInAddrErrors_lo; + u32 ipInUnknownProtos_hi; + u32 ipInUnknownProtos_lo; + u32 ipInDiscards_hi; + u32 ipInDiscards_lo; + u32 ipInDelivers_hi; + u32 ipInDelivers_lo; + u32 ipOutRequests_hi; + u32 ipOutRequests_lo; + u32 ipOutDiscards_hi; + u32 ipOutDiscards_lo; + u32 ipOutNoRoutes_hi; + u32 ipOutNoRoutes_lo; + u32 ipReasmTimeout; + u32 ipReasmReqds; + u32 ipReasmOKs; + u32 ipReasmFails; + + u32 reserved[8]; + + u32 tcpActiveOpens; + u32 tcpPassiveOpens; + u32 tcpAttemptFails; + u32 tcpEstabResets; + u32 tcpOutRsts; + u32 tcpCurrEstab; + u32 tcpInSegs_hi; + u32 tcpInSegs_lo; + u32 tcpOutSegs_hi; + u32 tcpOutSegs_lo; + u32 tcpRetransSeg_hi; + u32 tcpRetransSeg_lo; + u32 tcpInErrs_hi; + u32 tcpInErrs_lo; + u32 tcpRtoMin; + u32 tcpRtoMax; +}; + +struct tp_params { + unsigned int nchan; /* # of channels */ + unsigned int pmrx_size; /* total PMRX capacity */ + unsigned int pmtx_size; /* total PMTX capacity */ + unsigned int cm_size; /* total CM capacity */ + unsigned int chan_rx_size; /* per channel Rx size */ + unsigned int chan_tx_size; /* per channel Tx size */ + unsigned int rx_pg_size; /* Rx page size */ + unsigned int tx_pg_size; /* Tx page size */ + unsigned int rx_num_pgs; /* # of Rx pages */ + unsigned int tx_num_pgs; /* # of Tx pages */ + unsigned int ntimer_qs; /* # of timer queues */ +}; + +struct qset_params { /* SGE queue set parameters */ + unsigned int polling; /* polling/interrupt service for rspq */ + unsigned int coalesce_usecs; /* irq coalescing timer */ + unsigned int rspq_size; /* # of entries in response queue */ + unsigned int fl_size; /* # of entries in regular free list */ + unsigned int jumbo_size; /* # of entries in jumbo free list */ + unsigned int txq_size[SGE_TXQ_PER_SET]; /* Tx queue sizes */ + unsigned int cong_thres; /* FL congestion threshold */ +}; + +struct sge_params { + unsigned int max_pkt_size; /* max offload pkt size */ + struct qset_params qset[SGE_QSETS]; +}; + +struct mc5_params { + unsigned int mode; /* selects MC5 width */ + unsigned int nservers; /* size of server region */ + unsigned int nfilters; /* size of filter region */ + unsigned int nroutes; /* size of routing region */ +}; + +/* Default MC5 region sizes */ +enum { + DEFAULT_NSERVERS = 512, + DEFAULT_NFILTERS = 128 +}; + +/* MC5 modes, these must be non-0 */ +enum { + MC5_MODE_144_BIT = 1, + MC5_MODE_72_BIT = 2 +}; + +struct vpd_params { + unsigned int cclk; + unsigned int mclk; + unsigned int uclk; + unsigned int mdc; + unsigned int mem_timing; + u8 eth_base[6]; + u8 port_type[MAX_NPORTS]; + unsigned short xauicfg[2]; +}; + +struct pci_params { + unsigned int vpd_cap_addr; + unsigned int pcie_cap_addr; + unsigned short speed; + unsigned char width; + unsigned char variant; +}; + +enum { + PCI_VARIANT_PCI, + PCI_VARIANT_PCIX_MODE1_PARITY, + PCI_VARIANT_PCIX_MODE1_ECC, + PCI_VARIANT_PCIX_266_MODE2, + PCI_VARIANT_PCIE +}; + +struct adapter_params { + struct sge_params sge; + struct mc5_params mc5; + struct tp_params tp; + struct vpd_params vpd; + struct pci_params pci; + + const struct adapter_info *info; + + unsigned short mtus[NMTUS]; + unsigned short a_wnd[NCCTRL_WIN]; + unsigned short b_wnd[NCCTRL_WIN]; + + unsigned int nports; /* # of ethernet ports */ + unsigned int stats_update_period; /* MAC stats accumulation period */ + unsigned int linkpoll_period; /* link poll period in 0.1s */ + unsigned int rev; /* chip revision */ +}; + +struct trace_params { + u32 sip; + u32 sip_mask; + u32 dip; + u32 dip_mask; + u16 sport; + u16 sport_mask; + u16 dport; + u16 dport_mask; + u32 vlan:12; + u32 vlan_mask:12; + u32 intf:4; + u32 intf_mask:4; + u8 proto; + u8 proto_mask; +}; + +struct link_config { + unsigned int supported; /* link capabilities */ + unsigned int advertising; /* advertised capabilities */ + unsigned short requested_speed; /* speed user has requested */ + unsigned short speed; /* actual link speed */ + unsigned char requested_duplex; /* duplex user has requested */ + unsigned char duplex; /* actual link duplex */ + unsigned char requested_fc; /* flow control user has requested */ + unsigned char fc; /* actual link flow control */ + unsigned char autoneg; /* autonegotiating? */ + unsigned int link_ok; /* link up? */ +}; + +#define SPEED_INVALID 0xffff +#define DUPLEX_INVALID 0xff + +struct mc5 { + struct adapter *adapter; + unsigned int tcam_size; + unsigned char part_type; + unsigned char parity_enabled; + unsigned char mode; + struct mc5_stats stats; +}; + +static inline unsigned int t3_mc5_size(const struct mc5 *p) +{ + return p->tcam_size; +} + +struct mc7 { + struct adapter *adapter; /* backpointer to adapter */ + unsigned int size; /* memory size in bytes */ + unsigned int width; /* MC7 interface width */ + unsigned int offset; /* register address offset for MC7 instance */ + const char *name; /* name of MC7 instance */ + struct mc7_stats stats; /* MC7 statistics */ +}; + +static inline unsigned int t3_mc7_size(const struct mc7 *p) +{ + return p->size; +} + +struct cmac { + struct adapter *adapter; + unsigned int offset; + unsigned int nucast; /* # of address filters for unicast MACs */ + struct mac_stats stats; +}; + +enum { + MAC_DIRECTION_RX = 1, + MAC_DIRECTION_TX = 2, + MAC_RXFIFO_SIZE = 32768 +}; + +/* IEEE 802.3ae specified MDIO devices */ +enum { + MDIO_DEV_PMA_PMD = 1, + MDIO_DEV_WIS = 2, + MDIO_DEV_PCS = 3, + MDIO_DEV_XGXS = 4 +}; + +/* PHY loopback direction */ +enum { + PHY_LOOPBACK_TX = 1, + PHY_LOOPBACK_RX = 2 +}; + +/* PHY interrupt types */ +enum { + cphy_cause_link_change = 1, + cphy_cause_fifo_error = 2 +}; + +/* PHY operations */ +struct cphy_ops { + void (*destroy)(struct cphy *phy); + int (*reset)(struct cphy *phy, int wait); + + int (*intr_enable)(struct cphy *phy); + int (*intr_disable)(struct cphy *phy); + int (*intr_clear)(struct cphy *phy); + int (*intr_handler)(struct cphy *phy); + + int (*autoneg_enable)(struct cphy *phy); + int (*autoneg_restart)(struct cphy *phy); + + int (*advertise)(struct cphy *phy, unsigned int advertise_map); + int (*set_loopback)(struct cphy *phy, int mmd, int dir, int enable); + int (*set_speed_duplex)(struct cphy *phy, int speed, int duplex); + int (*get_link_status)(struct cphy *phy, int *link_ok, int *speed, + int *duplex, int *fc); + int (*power_down)(struct cphy *phy, int enable); +}; + +/* A PHY instance */ +struct cphy { + int addr; /* PHY address */ + struct adapter *adapter; /* associated adapter */ + unsigned long fifo_errors; /* FIFO over/under-flows */ + const struct cphy_ops *ops; /* PHY operations */ + int (*mdio_read)(struct adapter *adapter, int phy_addr, int mmd_addr, + int reg_addr, unsigned int *val); + int (*mdio_write)(struct adapter *adapter, int phy_addr, int mmd_addr, + int reg_addr, unsigned int val); +}; + +/* Convenience MDIO read/write wrappers */ +static inline int mdio_read(struct cphy *phy, int mmd, int reg, + unsigned int *valp) +{ + return phy->mdio_read(phy->adapter, phy->addr, mmd, reg, valp); +} + +static inline int mdio_write(struct cphy *phy, int mmd, int reg, + unsigned int val) +{ + return phy->mdio_write(phy->adapter, phy->addr, mmd, reg, val); +} + +/* Convenience initializer */ +static inline void cphy_init(struct cphy *phy, struct adapter *adapter, + int phy_addr, struct cphy_ops *phy_ops, + const struct mdio_ops *mdio_ops) +{ + phy->adapter = adapter; + phy->addr = phy_addr; + phy->ops = phy_ops; + if (mdio_ops) { + phy->mdio_read = mdio_ops->read; + phy->mdio_write = mdio_ops->write; + } +} + +/* Accumulate MAC statistics every 180 seconds. For 1G we multiply by 10. */ +#define MAC_STATS_ACCUM_SECS 180 + +#define XGM_REG(reg_addr, idx) \ + ((reg_addr) + (idx) * (XGMAC0_1_BASE_ADDR - XGMAC0_0_BASE_ADDR)) + +struct addr_val_pair { + unsigned int reg_addr; + unsigned int val; +}; + +#include "adapter.h" + +#ifndef PCI_VENDOR_ID_CHELSIO +# define PCI_VENDOR_ID_CHELSIO 0x1425 +#endif + +#define for_each_port(adapter, iter) \ + for (iter = 0; iter < (adapter)->params.nports; ++iter) + +#define adapter_info(adap) ((adap)->params.info) + +static inline int uses_xaui(const struct adapter *adap) +{ + return adapter_info(adap)->caps & SUPPORTED_AUI; +} + +static inline int is_10G(const struct adapter *adap) +{ + return adapter_info(adap)->caps & SUPPORTED_10000baseT_Full; +} + +static inline int is_offload(const struct adapter *adap) +{ + return adapter_info(adap)->caps & SUPPORTED_OFFLOAD; +} + +static inline unsigned int core_ticks_per_usec(const struct adapter *adap) +{ + return adap->params.vpd.cclk / 1000; +} + +static inline unsigned int is_pcie(const struct adapter *adap) +{ + return adap->params.pci.variant == PCI_VARIANT_PCIE; +} + +void t3_set_reg_field(struct adapter *adap, unsigned int addr, u32 mask, + u32 val); +void t3_write_regs(struct adapter *adapter, const struct addr_val_pair *p, + int n, unsigned int offset); +int t3_wait_op_done_val(struct adapter *adapter, int reg, u32 mask, + int polarity, int attempts, int delay, u32 *valp); +static inline int t3_wait_op_done(struct adapter *adapter, int reg, u32 mask, + int polarity, int attempts, int delay) +{ + return t3_wait_op_done_val(adapter, reg, mask, polarity, attempts, + delay, NULL); +} +int t3_mdio_change_bits(struct cphy *phy, int mmd, int reg, unsigned int clear, + unsigned int set); +int t3_phy_reset(struct cphy *phy, int mmd, int wait); +int t3_phy_advertise(struct cphy *phy, unsigned int advert); +int t3_set_phy_speed_duplex(struct cphy *phy, int speed, int duplex); + +void t3_intr_enable(struct adapter *adapter); +void t3_intr_disable(struct adapter *adapter); +void t3_intr_clear(struct adapter *adapter); +void t3_port_intr_enable(struct adapter *adapter, int idx); +void t3_port_intr_disable(struct adapter *adapter, int idx); +void t3_port_intr_clear(struct adapter *adapter, int idx); +int t3_slow_intr_handler(struct adapter *adapter); +int t3_phy_intr_handler(struct adapter *adapter); + +void t3_link_changed(struct adapter *adapter, int port_id); +int t3_link_start(struct cphy *phy, struct cmac *mac, struct link_config *lc); +const struct adapter_info *t3_get_adapter_info(unsigned int board_id); +int t3_seeprom_read(struct adapter *adapter, u32 addr, u32 *data); +int t3_seeprom_write(struct adapter *adapter, u32 addr, u32 data); +int t3_seeprom_wp(struct adapter *adapter, int enable); +int t3_read_flash(struct adapter *adapter, unsigned int addr, + unsigned int nwords, u32 *data, int byte_oriented); +int t3_load_fw(struct adapter *adapter, const u8 * fw_data, unsigned int size); +int t3_get_fw_version(struct adapter *adapter, u32 *vers); +int t3_check_fw_version(struct adapter *adapter); +int t3_init_hw(struct adapter *adapter, u32 fw_params); +void mac_prep(struct cmac *mac, struct adapter *adapter, int index); +void early_hw_init(struct adapter *adapter, const struct adapter_info *ai); +int t3_prep_adapter(struct adapter *adapter, const struct adapter_info *ai, + int reset); +void t3_led_ready(struct adapter *adapter); +void t3_fatal_err(struct adapter *adapter); +void t3_set_vlan_accel(struct adapter *adapter, unsigned int ports, int on); +void t3_config_rss(struct adapter *adapter, unsigned int rss_config, + const u8 * cpus, const u16 *rspq); +int t3_read_rss(struct adapter *adapter, u8 * lkup, u16 *map); +int t3_mps_set_active_ports(struct adapter *adap, unsigned int port_mask); +int t3_cim_ctl_blk_read(struct adapter *adap, unsigned int addr, + unsigned int n, unsigned int *valp); +int t3_mc7_bd_read(struct mc7 *mc7, unsigned int start, unsigned int n, + u64 *buf); + +int t3_mac_reset(struct cmac *mac); +void t3b_pcs_reset(struct cmac *mac); +int t3_mac_enable(struct cmac *mac, int which); +int t3_mac_disable(struct cmac *mac, int which); +int t3_mac_set_mtu(struct cmac *mac, unsigned int mtu); +int t3_mac_set_rx_mode(struct cmac *mac, struct t3_rx_mode *rm); +int t3_mac_set_address(struct cmac *mac, unsigned int idx, u8 addr[6]); +int t3_mac_set_num_ucast(struct cmac *mac, int n); +const struct mac_stats *t3_mac_update_stats(struct cmac *mac); +int t3_mac_set_speed_duplex_fc(struct cmac *mac, int speed, int duplex, int fc); + +void t3_mc5_prep(struct adapter *adapter, struct mc5 *mc5, int mode); +int t3_mc5_init(struct mc5 *mc5, unsigned int nservers, unsigned int nfilters, + unsigned int nroutes); +void t3_mc5_intr_handler(struct mc5 *mc5); +int t3_read_mc5_range(const struct mc5 *mc5, unsigned int start, unsigned int n, + u32 *buf); + +int t3_tp_set_coalescing_size(struct adapter *adap, unsigned int size, int psh); +void t3_tp_set_max_rxsize(struct adapter *adap, unsigned int size); +void t3_tp_set_offload_mode(struct adapter *adap, int enable); +void t3_tp_get_mib_stats(struct adapter *adap, struct tp_mib_stats *tps); +void t3_load_mtus(struct adapter *adap, unsigned short mtus[NMTUS], + unsigned short alpha[NCCTRL_WIN], + unsigned short beta[NCCTRL_WIN], unsigned short mtu_cap); +void t3_read_hw_mtus(struct adapter *adap, unsigned short mtus[NMTUS]); +void t3_get_cong_cntl_tab(struct adapter *adap, + unsigned short incr[NMTUS][NCCTRL_WIN]); +void t3_config_trace_filter(struct adapter *adapter, + const struct trace_params *tp, int filter_index, + int invert, int enable); +int t3_config_sched(struct adapter *adap, unsigned int kbps, int sched); + +void t3_sge_prep(struct adapter *adap, struct sge_params *p); +void t3_sge_init(struct adapter *adap, struct sge_params *p); +int t3_sge_init_ecntxt(struct adapter *adapter, unsigned int id, int gts_enable, + enum sge_context_type type, int respq, u64 base_addr, + unsigned int size, unsigned int token, int gen, + unsigned int cidx); +int t3_sge_init_flcntxt(struct adapter *adapter, unsigned int id, + int gts_enable, u64 base_addr, unsigned int size, + unsigned int esize, unsigned int cong_thres, int gen, + unsigned int cidx); +int t3_sge_init_rspcntxt(struct adapter *adapter, unsigned int id, + int irq_vec_idx, u64 base_addr, unsigned int size, + unsigned int fl_thres, int gen, unsigned int cidx); +int t3_sge_init_cqcntxt(struct adapter *adapter, unsigned int id, u64 base_addr, + unsigned int size, int rspq, int ovfl_mode, + unsigned int credits, unsigned int credit_thres); +int t3_sge_enable_ecntxt(struct adapter *adapter, unsigned int id, int enable); +int t3_sge_disable_fl(struct adapter *adapter, unsigned int id); +int t3_sge_disable_rspcntxt(struct adapter *adapter, unsigned int id); +int t3_sge_disable_cqcntxt(struct adapter *adapter, unsigned int id); +int t3_sge_read_ecntxt(struct adapter *adapter, unsigned int id, u32 data[4]); +int t3_sge_read_fl(struct adapter *adapter, unsigned int id, u32 data[4]); +int t3_sge_read_cq(struct adapter *adapter, unsigned int id, u32 data[4]); +int t3_sge_read_rspq(struct adapter *adapter, unsigned int id, u32 data[4]); +int t3_sge_cqcntxt_op(struct adapter *adapter, unsigned int id, unsigned int op, + unsigned int credits); + +void t3_vsc8211_phy_prep(struct cphy *phy, struct adapter *adapter, + int phy_addr, const struct mdio_ops *mdio_ops); +void t3_ael1002_phy_prep(struct cphy *phy, struct adapter *adapter, + int phy_addr, const struct mdio_ops *mdio_ops); +void t3_ael1006_phy_prep(struct cphy *phy, struct adapter *adapter, + int phy_addr, const struct mdio_ops *mdio_ops); +void t3_qt2045_phy_prep(struct cphy *phy, struct adapter *adapter, int phy_addr, + const struct mdio_ops *mdio_ops); +void t3_xaui_direct_phy_prep(struct cphy *phy, struct adapter *adapter, + int phy_addr, const struct mdio_ops *mdio_ops); +#endif /* __CHELSIO_COMMON_H */ diff --git a/drivers/net/cxgb3/cxgb3_ctl_defs.h b/drivers/net/cxgb3/cxgb3_ctl_defs.h new file mode 100644 index 00000000000..0fdc36529eb --- /dev/null +++ b/drivers/net/cxgb3/cxgb3_ctl_defs.h @@ -0,0 +1,142 @@ +/* + * Copyright (C) 2003-2006 Chelsio Communications. All rights reserved. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the LICENSE file included in this + * release for licensing terms and conditions. + */ + +#ifndef _CXGB3_OFFLOAD_CTL_DEFS_H +#define _CXGB3_OFFLOAD_CTL_DEFS_H + +enum { + GET_MAX_OUTSTANDING_WR, + GET_TX_MAX_CHUNK, + GET_TID_RANGE, + GET_STID_RANGE, + GET_RTBL_RANGE, + GET_L2T_CAPACITY, + GET_MTUS, + GET_WR_LEN, + GET_IFF_FROM_MAC, + GET_DDP_PARAMS, + GET_PORTS, + + ULP_ISCSI_GET_PARAMS, + ULP_ISCSI_SET_PARAMS, + + RDMA_GET_PARAMS, + RDMA_CQ_OP, + RDMA_CQ_SETUP, + RDMA_CQ_DISABLE, + RDMA_CTRL_QP_SETUP, + RDMA_GET_MEM, +}; + +/* + * Structure used to describe a TID range. Valid TIDs are [base, base+num). + */ +struct tid_range { + unsigned int base; /* first TID */ + unsigned int num; /* number of TIDs in range */ +}; + +/* + * Structure used to request the size and contents of the MTU table. + */ +struct mtutab { + unsigned int size; /* # of entries in the MTU table */ + const unsigned short *mtus; /* the MTU table values */ +}; + +struct net_device; + +/* + * Structure used to request the adapter net_device owning a given MAC address. + */ +struct iff_mac { + struct net_device *dev; /* the net_device */ + const unsigned char *mac_addr; /* MAC address to lookup */ + u16 vlan_tag; +}; + +struct pci_dev; + +/* + * Structure used to request the TCP DDP parameters. + */ +struct ddp_params { + unsigned int llimit; /* TDDP region start address */ + unsigned int ulimit; /* TDDP region end address */ + unsigned int tag_mask; /* TDDP tag mask */ + struct pci_dev *pdev; +}; + +struct adap_ports { + unsigned int nports; /* number of ports on this adapter */ + struct net_device *lldevs[2]; +}; + +/* + * Structure used to return information to the iscsi layer. + */ +struct ulp_iscsi_info { + unsigned int offset; + unsigned int llimit; + unsigned int ulimit; + unsigned int tagmask; + unsigned int pgsz3; + unsigned int pgsz2; + unsigned int pgsz1; + unsigned int pgsz0; + unsigned int max_rxsz; + unsigned int max_txsz; + struct pci_dev *pdev; +}; + +/* + * Structure used to return information to the RDMA layer. + */ +struct rdma_info { + unsigned int tpt_base; /* TPT base address */ + unsigned int tpt_top; /* TPT last entry address */ + unsigned int pbl_base; /* PBL base address */ + unsigned int pbl_top; /* PBL last entry address */ + unsigned int rqt_base; /* RQT base address */ + unsigned int rqt_top; /* RQT last entry address */ + unsigned int udbell_len; /* user doorbell region length */ + unsigned long udbell_physbase; /* user doorbell physical start addr */ + void __iomem *kdb_addr; /* kernel doorbell register address */ + struct pci_dev *pdev; /* associated PCI device */ +}; + +/* + * Structure used to request an operation on an RDMA completion queue. + */ +struct rdma_cq_op { + unsigned int id; + unsigned int op; + unsigned int credits; +}; + +/* + * Structure used to setup RDMA completion queues. + */ +struct rdma_cq_setup { + unsigned int id; + unsigned long long base_addr; + unsigned int size; + unsigned int credits; + unsigned int credit_thres; + unsigned int ovfl_mode; +}; + +/* + * Structure used to setup the RDMA control egress context. + */ +struct rdma_ctrlqp_setup { + unsigned long long base_addr; + unsigned int size; +}; +#endif /* _CXGB3_OFFLOAD_CTL_DEFS_H */ diff --git a/drivers/net/cxgb3/cxgb3_defs.h b/drivers/net/cxgb3/cxgb3_defs.h new file mode 100644 index 00000000000..82344c2bbc1 --- /dev/null +++ b/drivers/net/cxgb3/cxgb3_defs.h @@ -0,0 +1,99 @@ +/* + * Copyright (c) 2006 Chelsio, Inc. All rights reserved. + * Copyright (c) 2006 Open Grid Computing, Inc. All rights reserved. + * + * This software is available to you under a choice of one of two + * licenses. You may choose to be licensed under the terms of the GNU + * General Public License (GPL) Version 2, available from the file + * COPYING in the main directory of this source tree, or the + * OpenIB.org BSD license below: + * + * Redistribution and use in source and binary forms, with or + * without modification, are permitted provided that the following + * conditions are met: + * + * - Redistributions of source code must retain the above + * copyright notice, this list of conditions and the following + * disclaimer. + * + * - Redistributions in binary form must reproduce the above + * copyright notice, this list of conditions and the following + * disclaimer in the documentation and/or other materials + * provided with the distribution. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + */ +#ifndef _CHELSIO_DEFS_H +#define _CHELSIO_DEFS_H + +#include <linux/skbuff.h> +#include <net/tcp.h> + +#include "t3cdev.h" + +#include "cxgb3_offload.h" + +#define VALIDATE_TID 1 + +void *cxgb_alloc_mem(unsigned long size); +void cxgb_free_mem(void *addr); +void cxgb_neigh_update(struct neighbour *neigh); +void cxgb_redirect(struct dst_entry *old, struct dst_entry *new); + +/* + * Map an ATID or STID to their entries in the corresponding TID tables. + */ +static inline union active_open_entry *atid2entry(const struct tid_info *t, + unsigned int atid) +{ + return &t->atid_tab[atid - t->atid_base]; +} + +static inline union listen_entry *stid2entry(const struct tid_info *t, + unsigned int stid) +{ + return &t->stid_tab[stid - t->stid_base]; +} + +/* + * Find the connection corresponding to a TID. + */ +static inline struct t3c_tid_entry *lookup_tid(const struct tid_info *t, + unsigned int tid) +{ + return tid < t->ntids ? &(t->tid_tab[tid]) : NULL; +} + +/* + * Find the connection corresponding to a server TID. + */ +static inline struct t3c_tid_entry *lookup_stid(const struct tid_info *t, + unsigned int tid) +{ + if (tid < t->stid_base || tid >= t->stid_base + t->nstids) + return NULL; + return &(stid2entry(t, tid)->t3c_tid); +} + +/* + * Find the connection corresponding to an active-open TID. + */ +static inline struct t3c_tid_entry *lookup_atid(const struct tid_info *t, + unsigned int tid) +{ + if (tid < t->atid_base || tid >= t->atid_base + t->natids) + return NULL; + return &(atid2entry(t, tid)->t3c_tid); +} + +int process_rx(struct t3cdev *dev, struct sk_buff **skbs, int n); +int attach_t3cdev(struct t3cdev *dev); +void detach_t3cdev(struct t3cdev *dev); +#endif diff --git a/drivers/net/cxgb3/cxgb3_ioctl.h b/drivers/net/cxgb3/cxgb3_ioctl.h new file mode 100644 index 00000000000..1ee77b28cdf --- /dev/null +++ b/drivers/net/cxgb3/cxgb3_ioctl.h @@ -0,0 +1,165 @@ +/* + * This file is part of the Chelsio T3 Ethernet driver for Linux. + * + * Copyright (C) 2003-2006 Chelsio Communications. All rights reserved. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the LICENSE file included in this + * release for licensing terms and conditions. + */ + +#ifndef __CHIOCTL_H__ +#define __CHIOCTL_H__ + +/* + * Ioctl commands specific to this driver. + */ +enum { + CHELSIO_SETREG = 1024, + CHELSIO_GETREG, + CHELSIO_SETTPI, + CHELSIO_GETTPI, + CHELSIO_GETMTUTAB, + CHELSIO_SETMTUTAB, + CHELSIO_GETMTU, + CHELSIO_SET_PM, + CHELSIO_GET_PM, + CHELSIO_GET_TCAM, + CHELSIO_SET_TCAM, + CHELSIO_GET_TCB, + CHELSIO_GET_MEM, + CHELSIO_LOAD_FW, + CHELSIO_GET_PROTO, + CHELSIO_SET_PROTO, + CHELSIO_SET_TRACE_FILTER, + CHELSIO_SET_QSET_PARAMS, + CHELSIO_GET_QSET_PARAMS, + CHELSIO_SET_QSET_NUM, + CHELSIO_GET_QSET_NUM, + CHELSIO_SET_PKTSCHED, +}; + +struct ch_reg { + uint32_t cmd; + uint32_t addr; + uint32_t val; +}; + +struct ch_cntxt { + uint32_t cmd; + uint32_t cntxt_type; + uint32_t cntxt_id; + uint32_t data[4]; +}; + +/* context types */ +enum { CNTXT_TYPE_EGRESS, CNTXT_TYPE_FL, CNTXT_TYPE_RSP, CNTXT_TYPE_CQ }; + +struct ch_desc { + uint32_t cmd; + uint32_t queue_num; + uint32_t idx; + uint32_t size; + uint8_t data[128]; +}; + +struct ch_mem_range { + uint32_t cmd; + uint32_t mem_id; + uint32_t addr; + uint32_t len; + uint32_t version; + uint8_t buf[0]; +}; + +struct ch_qset_params { + uint32_t cmd; + uint32_t qset_idx; + int32_t txq_size[3]; + int32_t rspq_size; + int32_t fl_size[2]; + int32_t intr_lat; + int32_t polling; + int32_t cong_thres; +}; + +struct ch_pktsched_params { + uint32_t cmd; + uint8_t sched; + uint8_t idx; + uint8_t min; + uint8_t max; + uint8_t binding; +}; + +#ifndef TCB_SIZE +# define TCB_SIZE 128 +#endif + +/* TCB size in 32-bit words */ +#define TCB_WORDS (TCB_SIZE / 4) + +enum { MEM_CM, MEM_PMRX, MEM_PMTX }; /* ch_mem_range.mem_id values */ + +struct ch_mtus { + uint32_t cmd; + uint32_t nmtus; + uint16_t mtus[NMTUS]; +}; + +struct ch_pm { + uint32_t cmd; + uint32_t tx_pg_sz; + uint32_t tx_num_pg; + uint32_t rx_pg_sz; + uint32_t rx_num_pg; + uint32_t pm_total; +}; + +struct ch_tcam { + uint32_t cmd; + uint32_t tcam_size; + uint32_t nservers; + uint32_t nroutes; + uint32_t nfilters; +}; + +struct ch_tcb { + uint32_t cmd; + uint32_t tcb_index; + uint32_t tcb_data[TCB_WORDS]; +}; + +struct ch_tcam_word { + uint32_t cmd; + uint32_t addr; + uint32_t buf[3]; +}; + +struct ch_trace { + uint32_t cmd; + uint32_t sip; + uint32_t sip_mask; + uint32_t dip; + uint32_t dip_mask; + uint16_t sport; + uint16_t sport_mask; + uint16_t dport; + uint16_t dport_mask; + uint32_t vlan:12; + uint32_t vlan_mask:12; + uint32_t intf:4; + uint32_t intf_mask:4; + uint8_t proto; + uint8_t proto_mask; + uint8_t invert_match:1; + uint8_t config_tx:1; + uint8_t config_rx:1; + uint8_t trace_tx:1; + uint8_t trace_rx:1; +}; + +#define SIOCCHIOCTL SIOCDEVPRIVATE + +#endif diff --git a/drivers/net/cxgb3/cxgb3_main.c b/drivers/net/cxgb3/cxgb3_main.c new file mode 100644 index 00000000000..54c49acd86b --- /dev/null +++ b/drivers/net/cxgb3/cxgb3_main.c @@ -0,0 +1,2474 @@ +/* + * This file is part of the Chelsio T3 Ethernet driver for Linux. + * + * Copyright (C) 2003-2006 Chelsio Communications. All rights reserved. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the LICENSE file included in this + * release for licensing terms and conditions. + */ + +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/init.h> +#include <linux/pci.h> +#include <linux/dma-mapping.h> +#include <linux/netdevice.h> +#include <linux/etherdevice.h> +#include <linux/if_vlan.h> +#include <linux/mii.h> +#include <linux/sockios.h> +#include <linux/workqueue.h> +#include <linux/proc_fs.h> +#include <linux/rtnetlink.h> +#include <asm/uaccess.h> + +#include "common.h" +#include "cxgb3_ioctl.h" +#include "regs.h" +#include "cxgb3_offload.h" +#include "version.h" + +#include "cxgb3_ctl_defs.h" +#include "t3_cpl.h" +#include "firmware_exports.h" + +enum { + MAX_TXQ_ENTRIES = 16384, + MAX_CTRL_TXQ_ENTRIES = 1024, + MAX_RSPQ_ENTRIES = 16384, + MAX_RX_BUFFERS = 16384, + MAX_RX_JUMBO_BUFFERS = 16384, + MIN_TXQ_ENTRIES = 4, + MIN_CTRL_TXQ_ENTRIES = 4, + MIN_RSPQ_ENTRIES = 32, + MIN_FL_ENTRIES = 32 +}; + +#define PORT_MASK ((1 << MAX_NPORTS) - 1) + +#define DFLT_MSG_ENABLE (NETIF_MSG_DRV | NETIF_MSG_PROBE | NETIF_MSG_LINK | \ + NETIF_MSG_TIMER | NETIF_MSG_IFDOWN | NETIF_MSG_IFUP |\ + NETIF_MSG_RX_ERR | NETIF_MSG_TX_ERR) + +#define EEPROM_MAGIC 0x38E2F10C + +#define to_net_dev(class) container_of(class, struct net_device, class_dev) + +#define CH_DEVICE(devid, ssid, idx) \ + { PCI_VENDOR_ID_CHELSIO, devid, PCI_ANY_ID, ssid, 0, 0, idx } + +static const struct pci_device_id cxgb3_pci_tbl[] = { + CH_DEVICE(0x20, 1, 0), /* PE9000 */ + CH_DEVICE(0x21, 1, 1), /* T302E */ + CH_DEVICE(0x22, 1, 2), /* T310E */ + CH_DEVICE(0x23, 1, 3), /* T320X */ + CH_DEVICE(0x24, 1, 1), /* T302X */ + CH_DEVICE(0x25, 1, 3), /* T320E */ + CH_DEVICE(0x26, 1, 2), /* T310X */ + CH_DEVICE(0x30, 1, 2), /* T3B10 */ + CH_DEVICE(0x31, 1, 3), /* T3B20 */ + CH_DEVICE(0x32, 1, 1), /* T3B02 */ + {0,} +}; + +MODULE_DESCRIPTION(DRV_DESC); +MODULE_AUTHOR("Chelsio Communications"); +MODULE_LICENSE("GPL"); +MODULE_VERSION(DRV_VERSION); +MODULE_DEVICE_TABLE(pci, cxgb3_pci_tbl); + +static int dflt_msg_enable = DFLT_MSG_ENABLE; + +module_param(dflt_msg_enable, int, 0644); +MODULE_PARM_DESC(dflt_msg_enable, "Chelsio T3 default message enable bitmap"); + +/* + * The driver uses the best interrupt scheme available on a platform in the + * order MSI-X, MSI, legacy pin interrupts. This parameter determines which + * of these schemes the driver may consider as follows: + * + * msi = 2: choose from among all three options + * msi = 1: only consider MSI and pin interrupts + * msi = 0: force pin interrupts + */ +static int msi = 2; + +module_param(msi, int, 0644); +MODULE_PARM_DESC(msi, "whether to use MSI or MSI-X"); + +/* + * The driver enables offload as a default. + * To disable it, use ofld_disable = 1. + */ + +static int ofld_disable = 0; + +module_param(ofld_disable, int, 0644); +MODULE_PARM_DESC(ofld_disable, "whether to enable offload at init time or not"); + +/* + * We have work elements that we need to cancel when an interface is taken + * down. Normally the work elements would be executed by keventd but that + * can deadlock because of linkwatch. If our close method takes the rtnl + * lock and linkwatch is ahead of our work elements in keventd, linkwatch + * will block keventd as it needs the rtnl lock, and we'll deadlock waiting + * for our work to complete. Get our own work queue to solve this. + */ +static struct workqueue_struct *cxgb3_wq; + +/** + * link_report - show link status and link speed/duplex + * @p: the port whose settings are to be reported + * + * Shows the link status, speed, and duplex of a port. + */ +static void link_report(struct net_device *dev) +{ + if (!netif_carrier_ok(dev)) + printk(KERN_INFO "%s: link down\n", dev->name); + else { + const char *s = "10Mbps"; + const struct port_info *p = netdev_priv(dev); + + switch (p->link_config.speed) { + case SPEED_10000: + s = "10Gbps"; + break; + case SPEED_1000: + s = "1000Mbps"; + break; + case SPEED_100: + s = "100Mbps"; + break; + } + + printk(KERN_INFO "%s: link up, %s, %s-duplex\n", dev->name, s, + p->link_config.duplex == DUPLEX_FULL ? "full" : "half"); + } +} + +/** + * t3_os_link_changed - handle link status changes + * @adapter: the adapter associated with the link change + * @port_id: the port index whose limk status has changed + * @link_stat: the new status of the link + * @speed: the new speed setting + * @duplex: the new duplex setting + * @pause: the new flow-control setting + * + * This is the OS-dependent handler for link status changes. The OS + * neutral handler takes care of most of the processing for these events, + * then calls this handler for any OS-specific processing. + */ +void t3_os_link_changed(struct adapter *adapter, int port_id, int link_stat, + int speed, int duplex, int pause) +{ + struct net_device *dev = adapter->port[port_id]; + + /* Skip changes from disabled ports. */ + if (!netif_running(dev)) + return; + + if (link_stat != netif_carrier_ok(dev)) { + if (link_stat) + netif_carrier_on(dev); + else + netif_carrier_off(dev); + link_report(dev); + } +} + +static void cxgb_set_rxmode(struct net_device *dev) +{ + struct t3_rx_mode rm; + struct port_info *pi = netdev_priv(dev); + + init_rx_mode(&rm, dev, dev->mc_list); + t3_mac_set_rx_mode(&pi->mac, &rm); +} + +/** + * link_start - enable a port + * @dev: the device to enable + * + * Performs the MAC and PHY actions needed to enable a port. + */ +static void link_start(struct net_device *dev) +{ + struct t3_rx_mode rm; + struct port_info *pi = netdev_priv(dev); + struct cmac *mac = &pi->mac; + + init_rx_mode(&rm, dev, dev->mc_list); + t3_mac_reset(mac); + t3_mac_set_mtu(mac, dev->mtu); + t3_mac_set_address(mac, 0, dev->dev_addr); + t3_mac_set_rx_mode(mac, &rm); + t3_link_start(&pi->phy, mac, &pi->link_config); + t3_mac_enable(mac, MAC_DIRECTION_RX | MAC_DIRECTION_TX); +} + +static inline void cxgb_disable_msi(struct adapter *adapter) +{ + if (adapter->flags & USING_MSIX) { + pci_disable_msix(adapter->pdev); + adapter->flags &= ~USING_MSIX; + } else if (adapter->flags & USING_MSI) { + pci_disable_msi(adapter->pdev); + adapter->flags &= ~USING_MSI; + } +} + +/* + * Interrupt handler for asynchronous events used with MSI-X. + */ +static irqreturn_t t3_async_intr_handler(int irq, void *cookie) +{ + t3_slow_intr_handler(cookie); + return IRQ_HANDLED; +} + +/* + * Name the MSI-X interrupts. + */ +static void name_msix_vecs(struct adapter *adap) +{ + int i, j, msi_idx = 1, n = sizeof(adap->msix_info[0].desc) - 1; + + snprintf(adap->msix_info[0].desc, n, "%s", adap->name); + adap->msix_info[0].desc[n] = 0; + + for_each_port(adap, j) { + struct net_device *d = adap->port[j]; + const struct port_info *pi = netdev_priv(d); + + for (i = 0; i < pi->nqsets; i++, msi_idx++) { + snprintf(adap->msix_info[msi_idx].desc, n, + "%s (queue %d)", d->name, i); + adap->msix_info[msi_idx].desc[n] = 0; + } + } +} + +static int request_msix_data_irqs(struct adapter *adap) +{ + int i, j, err, qidx = 0; + + for_each_port(adap, i) { + int nqsets = adap2pinfo(adap, i)->nqsets; + + for (j = 0; j < nqsets; ++j) { + err = request_irq(adap->msix_info[qidx + 1].vec, + t3_intr_handler(adap, + adap->sge.qs[qidx]. + rspq.polling), 0, + adap->msix_info[qidx + 1].desc, + &adap->sge.qs[qidx]); + if (err) { + while (--qidx >= 0) + free_irq(adap->msix_info[qidx + 1].vec, + &adap->sge.qs[qidx]); + return err; + } + qidx++; + } + } + return 0; +} + +/** + * setup_rss - configure RSS + * @adap: the adapter + * + * Sets up RSS to distribute packets to multiple receive queues. We + * configure the RSS CPU lookup table to distribute to the number of HW + * receive queues, and the response queue lookup table to narrow that + * down to the response queues actually configured for each port. + * We always configure the RSS mapping for two ports since the mapping + * table has plenty of entries. + */ +static void setup_rss(struct adapter *adap) +{ + int i; + unsigned int nq0 = adap2pinfo(adap, 0)->nqsets; + unsigned int nq1 = adap->port[1] ? adap2pinfo(adap, 1)->nqsets : 1; + u8 cpus[SGE_QSETS + 1]; + u16 rspq_map[RSS_TABLE_SIZE]; + + for (i = 0; i < SGE_QSETS; ++i) + cpus[i] = i; + cpus[SGE_QSETS] = 0xff; /* terminator */ + + for (i = 0; i < RSS_TABLE_SIZE / 2; ++i) { + rspq_map[i] = i % nq0; + rspq_map[i + RSS_TABLE_SIZE / 2] = (i % nq1) + nq0; + } + + t3_config_rss(adap, F_RQFEEDBACKENABLE | F_TNLLKPEN | F_TNLMAPEN | + F_TNLPRTEN | F_TNL2TUPEN | F_TNL4TUPEN | + V_RRCPLCPUSIZE(6), cpus, rspq_map); +} + +/* + * If we have multiple receive queues per port serviced by NAPI we need one + * netdevice per queue as NAPI operates on netdevices. We already have one + * netdevice, namely the one associated with the interface, so we use dummy + * ones for any additional queues. Note that these netdevices exist purely + * so that NAPI has something to work with, they do not represent network + * ports and are not registered. + */ +static int init_dummy_netdevs(struct adapter *adap) +{ + int i, j, dummy_idx = 0; + struct net_device *nd; + + for_each_port(adap, i) { + struct net_device *dev = adap->port[i]; + const struct port_info *pi = netdev_priv(dev); + + for (j = 0; j < pi->nqsets - 1; j++) { + if (!adap->dummy_netdev[dummy_idx]) { + nd = alloc_netdev(0, "", ether_setup); + if (!nd) + goto free_all; + + nd->priv = adap; + nd->weight = 64; + set_bit(__LINK_STATE_START, &nd->state); + adap->dummy_netdev[dummy_idx] = nd; + } + strcpy(adap->dummy_netdev[dummy_idx]->name, dev->name); + dummy_idx++; + } + } + return 0; + +free_all: + while (--dummy_idx >= 0) { + free_netdev(adap->dummy_netdev[dummy_idx]); + adap->dummy_netdev[dummy_idx] = NULL; + } + return -ENOMEM; +} + +/* + * Wait until all NAPI handlers are descheduled. This includes the handlers of + * both netdevices representing interfaces and the dummy ones for the extra + * queues. + */ +static void quiesce_rx(struct adapter *adap) +{ + int i; + struct net_device *dev; + + for_each_port(adap, i) { + dev = adap->port[i]; + while (test_bit(__LINK_STATE_RX_SCHED, &dev->state)) + msleep(1); + } + + for (i = 0; i < ARRAY_SIZE(adap->dummy_netdev); i++) { + dev = adap->dummy_netdev[i]; + if (dev) + while (test_bit(__LINK_STATE_RX_SCHED, &dev->state)) + msleep(1); + } +} + +/** + * setup_sge_qsets - configure SGE Tx/Rx/response queues + * @adap: the adapter + * + * Determines how many sets of SGE queues to use and initializes them. + * We support multiple queue sets per port if we have MSI-X, otherwise + * just one queue set per port. + */ +static int setup_sge_qsets(struct adapter *adap) +{ + int i, j, err, irq_idx = 0, qset_idx = 0, dummy_dev_idx = 0; + unsigned int ntxq = is_offload(adap) ? SGE_TXQ_PER_SET : 1; + + if (adap->params.rev > 0 && !(adap->flags & USING_MSI)) + irq_idx = -1; + + for_each_port(adap, i) { + struct net_device *dev = adap->port[i]; + const struct port_info *pi = netdev_priv(dev); + + for (j = 0; j < pi->nqsets; ++j, ++qset_idx) { + err = t3_sge_alloc_qset(adap, qset_idx, 1, + (adap->flags & USING_MSIX) ? qset_idx + 1 : + irq_idx, + &adap->params.sge.qset[qset_idx], ntxq, + j == 0 ? dev : + adap-> dummy_netdev[dummy_dev_idx++]); + if (err) { + t3_free_sge_resources(adap); + return err; + } + } + } + + return 0; +} + +static ssize_t attr_show(struct class_device *cd, char *buf, + ssize_t(*format) (struct adapter *, char *)) +{ + ssize_t len; + struct adapter *adap = to_net_dev(cd)->priv; + + /* Synchronize with ioctls that may shut down the device */ + rtnl_lock(); + len = (*format) (adap, buf); + rtnl_unlock(); + return len; +} + +static ssize_t attr_store(struct class_device *cd, const char *buf, size_t len, + ssize_t(*set) (struct adapter *, unsigned int), + unsigned int min_val, unsigned int max_val) +{ + char *endp; + ssize_t ret; + unsigned int val; + struct adapter *adap = to_net_dev(cd)->priv; + + if (!capable(CAP_NET_ADMIN)) + return -EPERM; + + val = simple_strtoul(buf, &endp, 0); + if (endp == buf || val < min_val || val > max_val) + return -EINVAL; + + rtnl_lock(); + ret = (*set) (adap, val); + if (!ret) + ret = len; + rtnl_unlock(); + return ret; +} + +#define CXGB3_SHOW(name, val_expr) \ +static ssize_t format_##name(struct adapter *adap, char *buf) \ +{ \ + return sprintf(buf, "%u\n", val_expr); \ +} \ +static ssize_t show_##name(struct class_device *cd, char *buf) \ +{ \ + return attr_show(cd, buf, format_##name); \ +} + +static ssize_t set_nfilters(struct adapter *adap, unsigned int val) +{ + if (adap->flags & FULL_INIT_DONE) + return -EBUSY; + if (val && adap->params.rev == 0) + return -EINVAL; + if (val > t3_mc5_size(&adap->mc5) - adap->params.mc5.nservers) + return -EINVAL; + adap->params.mc5.nfilters = val; + return 0; +} + +static ssize_t store_nfilters(struct class_device *cd, const char *buf, + size_t len) +{ + return attr_store(cd, buf, len, set_nfilters, 0, ~0); +} + +static ssize_t set_nservers(struct adapter *adap, unsigned int val) +{ + if (adap->flags & FULL_INIT_DONE) + return -EBUSY; + if (val > t3_mc5_size(&adap->mc5) - adap->params.mc5.nfilters) + return -EINVAL; + adap->params.mc5.nservers = val; + return 0; +} + +static ssize_t store_nservers(struct class_device *cd, const char *buf, + size_t len) +{ + return attr_store(cd, buf, len, set_nservers, 0, ~0); +} + +#define CXGB3_ATTR_R(name, val_expr) \ +CXGB3_SHOW(name, val_expr) \ +static CLASS_DEVICE_ATTR(name, S_IRUGO, show_##name, NULL) + +#define CXGB3_ATTR_RW(name, val_expr, store_method) \ +CXGB3_SHOW(name, val_expr) \ +static CLASS_DEVICE_ATTR(name, S_IRUGO | S_IWUSR, show_##name, store_method) + +CXGB3_ATTR_R(cam_size, t3_mc5_size(&adap->mc5)); +CXGB3_ATTR_RW(nfilters, adap->params.mc5.nfilters, store_nfilters); +CXGB3_ATTR_RW(nservers, adap->params.mc5.nservers, store_nservers); + +static struct attribute *cxgb3_attrs[] = { + &class_device_attr_cam_size.attr, + &class_device_attr_nfilters.attr, + &class_device_attr_nservers.attr, + NULL +}; + +static struct attribute_group cxgb3_attr_group = {.attrs = cxgb3_attrs }; + +static ssize_t tm_attr_show(struct class_device *cd, char *buf, int sched) +{ + ssize_t len; + unsigned int v, addr, bpt, cpt; + struct adapter *adap = to_net_dev(cd)->priv; + + addr = A_TP_TX_MOD_Q1_Q0_RATE_LIMIT - sched / 2; + rtnl_lock(); + t3_write_reg(adap, A_TP_TM_PIO_ADDR, addr); + v = t3_read_reg(adap, A_TP_TM_PIO_DATA); + if (sched & 1) + v >>= 16; + bpt = (v >> 8) & 0xff; + cpt = v & 0xff; + if (!cpt) + len = sprintf(buf, "disabled\n"); + else { + v = (adap->params.vpd.cclk * 1000) / cpt; + len = sprintf(buf, "%u Kbps\n", (v * bpt) / 125); + } + rtnl_unlock(); + return len; +} + +static ssize_t tm_attr_store(struct class_device *cd, const char *buf, + size_t len, int sched) +{ + char *endp; + ssize_t ret; + unsigned int val; + struct adapter *adap = to_net_dev(cd)->priv; + + if (!capable(CAP_NET_ADMIN)) + return -EPERM; + + val = simple_strtoul(buf, &endp, 0); + if (endp == buf || val > 10000000) + return -EINVAL; + + rtnl_lock(); + ret = t3_config_sched(adap, val, sched); + if (!ret) + ret = len; + rtnl_unlock(); + return ret; +} + +#define TM_ATTR(name, sched) \ +static ssize_t show_##name(struct class_device *cd, char *buf) \ +{ \ + return tm_attr_show(cd, buf, sched); \ +} \ +static ssize_t store_##name(struct class_device *cd, const char *buf, size_t len) \ +{ \ + return tm_attr_store(cd, buf, len, sched); \ +} \ +static CLASS_DEVICE_ATTR(name, S_IRUGO | S_IWUSR, show_##name, store_##name) + +TM_ATTR(sched0, 0); +TM_ATTR(sched1, 1); +TM_ATTR(sched2, 2); +TM_ATTR(sched3, 3); +TM_ATTR(sched4, 4); +TM_ATTR(sched5, 5); +TM_ATTR(sched6, 6); +TM_ATTR(sched7, 7); + +static struct attribute *offload_attrs[] = { + &class_device_attr_sched0.attr, + &class_device_attr_sched1.attr, + &class_device_attr_sched2.attr, + &class_device_attr_sched3.attr, + &class_device_attr_sched4.attr, + &class_device_attr_sched5.attr, + &class_device_attr_sched6.attr, + &class_device_attr_sched7.attr, + NULL +}; + +static struct attribute_group offload_attr_group = {.attrs = offload_attrs }; + +/* + * Sends an sk_buff to an offload queue driver + * after dealing with any active network taps. + */ +static inline int offload_tx(struct t3cdev *tdev, struct sk_buff *skb) +{ + int ret; + + local_bh_disable(); + ret = t3_offload_tx(tdev, skb); + local_bh_enable(); + return ret; +} + +static int write_smt_entry(struct adapter *adapter, int idx) +{ + struct cpl_smt_write_req *req; + struct sk_buff *skb = alloc_skb(sizeof(*req), GFP_KERNEL); + + if (!skb) + return -ENOMEM; + + req = (struct cpl_smt_write_req *)__skb_put(skb, sizeof(*req)); + req->wr.wr_hi = htonl(V_WR_OP(FW_WROPCODE_FORWARD)); + OPCODE_TID(req) = htonl(MK_OPCODE_TID(CPL_SMT_WRITE_REQ, idx)); + req->mtu_idx = NMTUS - 1; /* should be 0 but there's a T3 bug */ + req->iff = idx; + memset(req->src_mac1, 0, sizeof(req->src_mac1)); + memcpy(req->src_mac0, adapter->port[idx]->dev_addr, ETH_ALEN); + skb->priority = 1; + offload_tx(&adapter->tdev, skb); + return 0; +} + +static int init_smt(struct adapter *adapter) +{ + int i; + + for_each_port(adapter, i) + write_smt_entry(adapter, i); + return 0; +} + +static void init_port_mtus(struct adapter *adapter) +{ + unsigned int mtus = adapter->port[0]->mtu; + + if (adapter->port[1]) + mtus |= adapter->port[1]->mtu << 16; + t3_write_reg(adapter, A_TP_MTU_PORT_TABLE, mtus); +} + +/** + * cxgb_up - enable the adapter + * @adapter: adapter being enabled + * + * Called when the first port is enabled, this function performs the + * actions necessary to make an adapter operational, such as completing + * the initialization of HW modules, and enabling interrupts. + * + * Must be called with the rtnl lock held. + */ +static int cxgb_up(struct adapter *adap) +{ + int err = 0; + + if (!(adap->flags & FULL_INIT_DONE)) { + err = t3_check_fw_version(adap); + if (err) { + dev_err(&adap->pdev->dev, + "adapter FW is not compatible with driver\n"); + goto out; + } + + err = init_dummy_netdevs(adap); + if (err) + goto out; + + err = t3_init_hw(adap, 0); + if (err) + goto out; + + err = setup_sge_qsets(adap); + if (err) + goto out; + + setup_rss(adap); + adap->flags |= FULL_INIT_DONE; + } + + t3_intr_clear(adap); + + if (adap->flags & USING_MSIX) { + name_msix_vecs(adap); + err = request_irq(adap->msix_info[0].vec, + t3_async_intr_handler, 0, + adap->msix_info[0].desc, adap); + if (err) + goto irq_err; + + if (request_msix_data_irqs(adap)) { + free_irq(adap->msix_info[0].vec, adap); + goto irq_err; + } + } else if ((err = request_irq(adap->pdev->irq, + t3_intr_handler(adap, + adap->sge.qs[0].rspq. + polling), + (adap->flags & USING_MSI) ? 0 : SA_SHIRQ, + adap->name, adap))) + goto irq_err; + + t3_sge_start(adap); + t3_intr_enable(adap); +out: + return err; +irq_err: + CH_ERR(adap, "request_irq failed, err %d\n", err); + goto out; +} + +/* + * Release resources when all the ports and offloading have been stopped. + */ +static void cxgb_down(struct adapter *adapter) +{ + t3_sge_stop(adapter); + spin_lock_irq(&adapter->work_lock); /* sync with PHY intr task */ + t3_intr_disable(adapter); + spin_unlock_irq(&adapter->work_lock); + + if (adapter->flags & USING_MSIX) { + int i, n = 0; + + free_irq(adapter->msix_info[0].vec, adapter); + for_each_port(adapter, i) + n += adap2pinfo(adapter, i)->nqsets; + + for (i = 0; i < n; ++i) + free_irq(adapter->msix_info[i + 1].vec, + &adapter->sge.qs[i]); + } else + free_irq(adapter->pdev->irq, adapter); + + flush_workqueue(cxgb3_wq); /* wait for external IRQ handler */ + quiesce_rx(adapter); +} + +static void schedule_chk_task(struct adapter *adap) +{ + unsigned int timeo; + + timeo = adap->params.linkpoll_period ? + (HZ * adap->params.linkpoll_period) / 10 : + adap->params.stats_update_period * HZ; + if (timeo) + queue_delayed_work(cxgb3_wq, &adap->adap_check_task, timeo); +} + +static int offload_open(struct net_device *dev) +{ + struct adapter *adapter = dev->priv; + struct t3cdev *tdev = T3CDEV(dev); + int adap_up = adapter->open_device_map & PORT_MASK; + int err = 0; + + if (test_and_set_bit(OFFLOAD_DEVMAP_BIT, &adapter->open_device_map)) + return 0; + + if (!adap_up && (err = cxgb_up(adapter)) < 0) + return err; + + t3_tp_set_offload_mode(adapter, 1); + tdev->lldev = adapter->port[0]; + err = cxgb3_offload_activate(adapter); + if (err) + goto out; + + init_port_mtus(adapter); + t3_load_mtus(adapter, adapter->params.mtus, adapter->params.a_wnd, + adapter->params.b_wnd, + adapter->params.rev == 0 ? + adapter->port[0]->mtu : 0xffff); + init_smt(adapter); + + /* Never mind if the next step fails */ + sysfs_create_group(&tdev->lldev->class_dev.kobj, &offload_attr_group); + + /* Call back all registered clients */ + cxgb3_add_clients(tdev); + +out: + /* restore them in case the offload module has changed them */ + if (err) { + t3_tp_set_offload_mode(adapter, 0); + clear_bit(OFFLOAD_DEVMAP_BIT, &adapter->open_device_map); + cxgb3_set_dummy_ops(tdev); + } + return err; +} + +static int offload_close(struct t3cdev *tdev) +{ + struct adapter *adapter = tdev2adap(tdev); + + if (!test_bit(OFFLOAD_DEVMAP_BIT, &adapter->open_device_map)) + return 0; + + /* Call back all registered clients */ + cxgb3_remove_clients(tdev); + + sysfs_remove_group(&tdev->lldev->class_dev.kobj, &offload_attr_group); + + tdev->lldev = NULL; + cxgb3_set_dummy_ops(tdev); + t3_tp_set_offload_mode(adapter, 0); + clear_bit(OFFLOAD_DEVMAP_BIT, &adapter->open_device_map); + + if (!adapter->open_device_map) + cxgb_down(adapter); + + cxgb3_offload_deactivate(adapter); + return 0; +} + +static int cxgb_open(struct net_device *dev) +{ + int err; + struct adapter *adapter = dev->priv; + struct port_info *pi = netdev_priv(dev); + int other_ports = adapter->open_device_map & PORT_MASK; + + if (!adapter->open_device_map && (err = cxgb_up(adapter)) < 0) + return err; + + set_bit(pi->port_id, &adapter->open_device_map); + if (!ofld_disable) { + err = offload_open(dev); + if (err) + printk(KERN_WARNING + "Could not initialize offload capabilities\n"); + } + + link_start(dev); + t3_port_intr_enable(adapter, pi->port_id); + netif_start_queue(dev); + if (!other_ports) + schedule_chk_task(adapter); + + return 0; +} + +static int cxgb_close(struct net_device *dev) +{ + struct adapter *adapter = dev->priv; + struct port_info *p = netdev_priv(dev); + + t3_port_intr_disable(adapter, p->port_id); + netif_stop_queue(dev); + p->phy.ops->power_down(&p->phy, 1); + netif_carrier_off(dev); + t3_mac_disable(&p->mac, MAC_DIRECTION_TX | MAC_DIRECTION_RX); + + spin_lock(&adapter->work_lock); /* sync with update task */ + clear_bit(p->port_id, &adapter->open_device_map); + spin_unlock(&adapter->work_lock); + + if (!(adapter->open_device_map & PORT_MASK)) + cancel_rearming_delayed_workqueue(cxgb3_wq, + &adapter->adap_check_task); + + if (!adapter->open_device_map) + cxgb_down(adapter); + + return 0; +} + +static struct net_device_stats *cxgb_get_stats(struct net_device *dev) +{ + struct adapter *adapter = dev->priv; + struct port_info *p = netdev_priv(dev); + struct net_device_stats *ns = &p->netstats; + const struct mac_stats *pstats; + + spin_lock(&adapter->stats_lock); + pstats = t3_mac_update_stats(&p->mac); + spin_unlock(&adapter->stats_lock); + + ns->tx_bytes = pstats->tx_octets; + ns->tx_packets = pstats->tx_frames; + ns->rx_bytes = pstats->rx_octets; + ns->rx_packets = pstats->rx_frames; + ns->multicast = pstats->rx_mcast_frames; + + ns->tx_errors = pstats->tx_underrun; + ns->rx_errors = pstats->rx_symbol_errs + pstats->rx_fcs_errs + + pstats->rx_too_long + pstats->rx_jabber + pstats->rx_short + + pstats->rx_fifo_ovfl; + + /* detailed rx_errors */ + ns->rx_length_errors = pstats->rx_jabber + pstats->rx_too_long; + ns->rx_over_errors = 0; + ns->rx_crc_errors = pstats->rx_fcs_errs; + ns->rx_frame_errors = pstats->rx_symbol_errs; + ns->rx_fifo_errors = pstats->rx_fifo_ovfl; + ns->rx_missed_errors = pstats->rx_cong_drops; + + /* detailed tx_errors */ + ns->tx_aborted_errors = 0; + ns->tx_carrier_errors = 0; + ns->tx_fifo_errors = pstats->tx_underrun; + ns->tx_heartbeat_errors = 0; + ns->tx_window_errors = 0; + return ns; +} + +static u32 get_msglevel(struct net_device *dev) +{ + struct adapter *adapter = dev->priv; + + return adapter->msg_enable; +} + +static void set_msglevel(struct net_device *dev, u32 val) +{ + struct adapter *adapter = dev->priv; + + adapter->msg_enable = val; +} + +static char stats_strings[][ETH_GSTRING_LEN] = { + "TxOctetsOK ", + "TxFramesOK ", + "TxMulticastFramesOK", + "TxBroadcastFramesOK", + "TxPauseFrames ", + "TxUnderrun ", + "TxExtUnderrun ", + + "TxFrames64 ", + "TxFrames65To127 ", + "TxFrames128To255 ", + "TxFrames256To511 ", + "TxFrames512To1023 ", + "TxFrames1024To1518 ", + "TxFrames1519ToMax ", + + "RxOctetsOK ", + "RxFramesOK ", + "RxMulticastFramesOK", + "RxBroadcastFramesOK", + "RxPauseFrames ", + "RxFCSErrors ", + "RxSymbolErrors ", + "RxShortErrors ", + "RxJabberErrors ", + "RxLengthErrors ", + "RxFIFOoverflow ", + + "RxFrames64 ", + "RxFrames65To127 ", + "RxFrames128To255 ", + "RxFrames256To511 ", + "RxFrames512To1023 ", + "RxFrames1024To1518 ", + "RxFrames1519ToMax ", + + "PhyFIFOErrors ", + "TSO ", + "VLANextractions ", + "VLANinsertions ", + "TxCsumOffload ", + "RxCsumGood ", + "RxDrops " +}; + +static int get_stats_count(struct net_device *dev) +{ + return ARRAY_SIZE(stats_strings); +} + +#define T3_REGMAP_SIZE (3 * 1024) + +static int get_regs_len(struct net_device *dev) +{ + return T3_REGMAP_SIZE; +} + +static int get_eeprom_len(struct net_device *dev) +{ + return EEPROMSIZE; +} + +static void get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info) +{ + u32 fw_vers = 0; + struct adapter *adapter = dev->priv; + + t3_get_fw_version(adapter, &fw_vers); + + strcpy(info->driver, DRV_NAME); + strcpy(info->version, DRV_VERSION); + strcpy(info->bus_info, pci_name(adapter->pdev)); + if (!fw_vers) + strcpy(info->fw_version, "N/A"); + else + snprintf(info->fw_version, sizeof(info->fw_version), + "%s %u.%u", (fw_vers >> 24) ? "T" : "N", + (fw_vers >> 12) & 0xfff, fw_vers & 0xfff); +} + +static void get_strings(struct net_device *dev, u32 stringset, u8 * data) +{ + if (stringset == ETH_SS_STATS) + memcpy(data, stats_strings, sizeof(stats_strings)); +} + +static unsigned long collect_sge_port_stats(struct adapter *adapter, + struct port_info *p, int idx) +{ + int i; + unsigned long tot = 0; + + for (i = 0; i < p->nqsets; ++i) + tot += adapter->sge.qs[i + p->first_qset].port_stats[idx]; + return tot; +} + +static void get_stats(struct net_device *dev, struct ethtool_stats *stats, + u64 *data) +{ + struct adapter *adapter = dev->priv; + struct port_info *pi = netdev_priv(dev); + const struct mac_stats *s; + + spin_lock(&adapter->stats_lock); + s = t3_mac_update_stats(&pi->mac); + spin_unlock(&adapter->stats_lock); + + *data++ = s->tx_octets; + *data++ = s->tx_frames; + *data++ = s->tx_mcast_frames; + *data++ = s->tx_bcast_frames; + *data++ = s->tx_pause; + *data++ = s->tx_underrun; + *data++ = s->tx_fifo_urun; + + *data++ = s->tx_frames_64; + *data++ = s->tx_frames_65_127; + *data++ = s->tx_frames_128_255; + *data++ = s->tx_frames_256_511; + *data++ = s->tx_frames_512_1023; + *data++ = s->tx_frames_1024_1518; + *data++ = s->tx_frames_1519_max; + + *data++ = s->rx_octets; + *data++ = s->rx_frames; + *data++ = s->rx_mcast_frames; + *data++ = s->rx_bcast_frames; + *data++ = s->rx_pause; + *data++ = s->rx_fcs_errs; + *data++ = s->rx_symbol_errs; + *data++ = s->rx_short; + *data++ = s->rx_jabber; + *data++ = s->rx_too_long; + *data++ = s->rx_fifo_ovfl; + + *data++ = s->rx_frames_64; + *data++ = s->rx_frames_65_127; + *data++ = s->rx_frames_128_255; + *data++ = s->rx_frames_256_511; + *data++ = s->rx_frames_512_1023; + *data++ = s->rx_frames_1024_1518; + *data++ = s->rx_frames_1519_max; + + *data++ = pi->phy.fifo_errors; + + *data++ = collect_sge_port_stats(adapter, pi, SGE_PSTAT_TSO); + *data++ = collect_sge_port_stats(adapter, pi, SGE_PSTAT_VLANEX); + *data++ = collect_sge_port_stats(adapter, pi, SGE_PSTAT_VLANINS); + *data++ = collect_sge_port_stats(adapter, pi, SGE_PSTAT_TX_CSUM); + *data++ = collect_sge_port_stats(adapter, pi, SGE_PSTAT_RX_CSUM_GOOD); + *data++ = s->rx_cong_drops; +} + +static inline void reg_block_dump(struct adapter *ap, void *buf, + unsigned int start, unsigned int end) +{ + u32 *p = buf + start; + + for (; start <= end; start += sizeof(u32)) + *p++ = t3_read_reg(ap, start); +} + +static void get_regs(struct net_device *dev, struct ethtool_regs *regs, + void *buf) +{ + struct adapter *ap = dev->priv; + + /* + * Version scheme: + * bits 0..9: chip version + * bits 10..15: chip revision + * bit 31: set for PCIe cards + */ + regs->version = 3 | (ap->params.rev << 10) | (is_pcie(ap) << 31); + + /* + * We skip the MAC statistics registers because they are clear-on-read. + * Also reading multi-register stats would need to synchronize with the + * periodic mac stats accumulation. Hard to justify the complexity. + */ + memset(buf, 0, T3_REGMAP_SIZE); + reg_block_dump(ap, buf, 0, A_SG_RSPQ_CREDIT_RETURN); + reg_block_dump(ap, buf, A_SG_HI_DRB_HI_THRSH, A_ULPRX_PBL_ULIMIT); + reg_block_dump(ap, buf, A_ULPTX_CONFIG, A_MPS_INT_CAUSE); + reg_block_dump(ap, buf, A_CPL_SWITCH_CNTRL, A_CPL_MAP_TBL_DATA); + reg_block_dump(ap, buf, A_SMB_GLOBAL_TIME_CFG, A_XGM_SERDES_STAT3); + reg_block_dump(ap, buf, A_XGM_SERDES_STATUS0, + XGM_REG(A_XGM_SERDES_STAT3, 1)); + reg_block_dump(ap, buf, XGM_REG(A_XGM_SERDES_STATUS0, 1), + XGM_REG(A_XGM_RX_SPI4_SOP_EOP_CNT, 1)); +} + +static int restart_autoneg(struct net_device *dev) +{ + struct port_info *p = netdev_priv(dev); + + if (!netif_running(dev)) + return -EAGAIN; + if (p->link_config.autoneg != AUTONEG_ENABLE) + return -EINVAL; + p->phy.ops->autoneg_restart(&p->phy); + return 0; +} + +static int cxgb3_phys_id(struct net_device *dev, u32 data) +{ + int i; + struct adapter *adapter = dev->priv; + + if (data == 0) + data = 2; + + for (i = 0; i < data * 2; i++) { + t3_set_reg_field(adapter, A_T3DBG_GPIO_EN, F_GPIO0_OUT_VAL, + (i & 1) ? F_GPIO0_OUT_VAL : 0); + if (msleep_interruptible(500)) + break; + } + t3_set_reg_field(adapter, A_T3DBG_GPIO_EN, F_GPIO0_OUT_VAL, + F_GPIO0_OUT_VAL); + return 0; +} + +static int get_settings(struct net_device *dev, struct ethtool_cmd *cmd) +{ + struct port_info *p = netdev_priv(dev); + + cmd->supported = p->link_config.supported; + cmd->advertising = p->link_config.advertising; + + if (netif_carrier_ok(dev)) { + cmd->speed = p->link_config.speed; + cmd->duplex = p->link_config.duplex; + } else { + cmd->speed = -1; + cmd->duplex = -1; + } + + cmd->port = (cmd->supported & SUPPORTED_TP) ? PORT_TP : PORT_FIBRE; + cmd->phy_address = p->phy.addr; + cmd->transceiver = XCVR_EXTERNAL; + cmd->autoneg = p->link_config.autoneg; + cmd->maxtxpkt = 0; + cmd->maxrxpkt = 0; + return 0; +} + +static int speed_duplex_to_caps(int speed, int duplex) +{ + int cap = 0; + + switch (speed) { + case SPEED_10: + if (duplex == DUPLEX_FULL) + cap = SUPPORTED_10baseT_Full; + else + cap = SUPPORTED_10baseT_Half; + break; + case SPEED_100: + if (duplex == DUPLEX_FULL) + cap = SUPPORTED_100baseT_Full; + else + cap = SUPPORTED_100baseT_Half; + break; + case SPEED_1000: + if (duplex == DUPLEX_FULL) + cap = SUPPORTED_1000baseT_Full; + else + cap = SUPPORTED_1000baseT_Half; + break; + case SPEED_10000: + if (duplex == DUPLEX_FULL) + cap = SUPPORTED_10000baseT_Full; + } + return cap; +} + +#define ADVERTISED_MASK (ADVERTISED_10baseT_Half | ADVERTISED_10baseT_Full | \ + ADVERTISED_100baseT_Half | ADVERTISED_100baseT_Full | \ + ADVERTISED_1000baseT_Half | ADVERTISED_1000baseT_Full | \ + ADVERTISED_10000baseT_Full) + +static int set_settings(struct net_device *dev, struct ethtool_cmd *cmd) +{ + struct port_info *p = netdev_priv(dev); + struct link_config *lc = &p->link_config; + + if (!(lc->supported & SUPPORTED_Autoneg)) + return -EOPNOTSUPP; /* can't change speed/duplex */ + + if (cmd->autoneg == AUTONEG_DISABLE) { + int cap = speed_duplex_to_caps(cmd->speed, cmd->duplex); + + if (!(lc->supported & cap) || cmd->speed == SPEED_1000) + return -EINVAL; + lc->requested_speed = cmd->speed; + lc->requested_duplex = cmd->duplex; + lc->advertising = 0; + } else { + cmd->advertising &= ADVERTISED_MASK; + cmd->advertising &= lc->supported; + if (!cmd->advertising) + return -EINVAL; + lc->requested_speed = SPEED_INVALID; + lc->requested_duplex = DUPLEX_INVALID; + lc->advertising = cmd->advertising | ADVERTISED_Autoneg; + } + lc->autoneg = cmd->autoneg; + if (netif_running(dev)) + t3_link_start(&p->phy, &p->mac, lc); + return 0; +} + +static void get_pauseparam(struct net_device *dev, + struct ethtool_pauseparam *epause) +{ + struct port_info *p = netdev_priv(dev); + + epause->autoneg = (p->link_config.requested_fc & PAUSE_AUTONEG) != 0; + epause->rx_pause = (p->link_config.fc & PAUSE_RX) != 0; + epause->tx_pause = (p->link_config.fc & PAUSE_TX) != 0; +} + +static int set_pauseparam(struct net_device *dev, + struct ethtool_pauseparam *epause) +{ + struct port_info *p = netdev_priv(dev); + struct link_config *lc = &p->link_config; + + if (epause->autoneg == AUTONEG_DISABLE) + lc->requested_fc = 0; + else if (lc->supported & SUPPORTED_Autoneg) + lc->requested_fc = PAUSE_AUTONEG; + else + return -EINVAL; + + if (epause->rx_pause) + lc->requested_fc |= PAUSE_RX; + if (epause->tx_pause) + lc->requested_fc |= PAUSE_TX; + if (lc->autoneg == AUTONEG_ENABLE) { + if (netif_running(dev)) + t3_link_start(&p->phy, &p->mac, lc); + } else { + lc->fc = lc->requested_fc & (PAUSE_RX | PAUSE_TX); + if (netif_running(dev)) + t3_mac_set_speed_duplex_fc(&p->mac, -1, -1, lc->fc); + } + return 0; +} + +static u32 get_rx_csum(struct net_device *dev) +{ + struct port_info *p = netdev_priv(dev); + + return p->rx_csum_offload; +} + +static int set_rx_csum(struct net_device *dev, u32 data) +{ + struct port_info *p = netdev_priv(dev); + + p->rx_csum_offload = data; + return 0; +} + +static void get_sge_param(struct net_device *dev, struct ethtool_ringparam *e) +{ + struct adapter *adapter = dev->priv; + + e->rx_max_pending = MAX_RX_BUFFERS; + e->rx_mini_max_pending = 0; + e->rx_jumbo_max_pending = MAX_RX_JUMBO_BUFFERS; + e->tx_max_pending = MAX_TXQ_ENTRIES; + + e->rx_pending = adapter->params.sge.qset[0].fl_size; + e->rx_mini_pending = adapter->params.sge.qset[0].rspq_size; + e->rx_jumbo_pending = adapter->params.sge.qset[0].jumbo_size; + e->tx_pending = adapter->params.sge.qset[0].txq_size[0]; +} + +static int set_sge_param(struct net_device *dev, struct ethtool_ringparam *e) +{ + int i; + struct adapter *adapter = dev->priv; + + if (e->rx_pending > MAX_RX_BUFFERS || + e->rx_jumbo_pending > MAX_RX_JUMBO_BUFFERS || + e->tx_pending > MAX_TXQ_ENTRIES || + e->rx_mini_pending > MAX_RSPQ_ENTRIES || + e->rx_mini_pending < MIN_RSPQ_ENTRIES || + e->rx_pending < MIN_FL_ENTRIES || + e->rx_jumbo_pending < MIN_FL_ENTRIES || + e->tx_pending < adapter->params.nports * MIN_TXQ_ENTRIES) + return -EINVAL; + + if (adapter->flags & FULL_INIT_DONE) + return -EBUSY; + + for (i = 0; i < SGE_QSETS; ++i) { + struct qset_params *q = &adapter->params.sge.qset[i]; + + q->rspq_size = e->rx_mini_pending; + q->fl_size = e->rx_pending; + q->jumbo_size = e->rx_jumbo_pending; + q->txq_size[0] = e->tx_pending; + q->txq_size[1] = e->tx_pending; + q->txq_size[2] = e->tx_pending; + } + return 0; +} + +static int set_coalesce(struct net_device *dev, struct ethtool_coalesce *c) +{ + struct adapter *adapter = dev->priv; + struct qset_params *qsp = &adapter->params.sge.qset[0]; + struct sge_qset *qs = &adapter->sge.qs[0]; + + if (c->rx_coalesce_usecs * 10 > M_NEWTIMER) + return -EINVAL; + + qsp->coalesce_usecs = c->rx_coalesce_usecs; + t3_update_qset_coalesce(qs, qsp); + return 0; +} + +static int get_coalesce(struct net_device *dev, struct ethtool_coalesce *c) +{ + struct adapter *adapter = dev->priv; + struct qset_params *q = adapter->params.sge.qset; + + c->rx_coalesce_usecs = q->coalesce_usecs; + return 0; +} + +static int get_eeprom(struct net_device *dev, struct ethtool_eeprom *e, + u8 * data) +{ + int i, err = 0; + struct adapter *adapter = dev->priv; + + u8 *buf = kmalloc(EEPROMSIZE, GFP_KERNEL); + if (!buf) + return -ENOMEM; + + e->magic = EEPROM_MAGIC; + for (i = e->offset & ~3; !err && i < e->offset + e->len; i += 4) + err = t3_seeprom_read(adapter, i, (u32 *) & buf[i]); + + if (!err) + memcpy(data, buf + e->offset, e->len); + kfree(buf); + return err; +} + +static int set_eeprom(struct net_device *dev, struct ethtool_eeprom *eeprom, + u8 * data) +{ + u8 *buf; + int err = 0; + u32 aligned_offset, aligned_len, *p; + struct adapter *adapter = dev->priv; + + if (eeprom->magic != EEPROM_MAGIC) + return -EINVAL; + + aligned_offset = eeprom->offset & ~3; + aligned_len = (eeprom->len + (eeprom->offset & 3) + 3) & ~3; + + if (aligned_offset != eeprom->offset || aligned_len != eeprom->len) { + buf = kmalloc(aligned_len, GFP_KERNEL); + if (!buf) + return -ENOMEM; + err = t3_seeprom_read(adapter, aligned_offset, (u32 *) buf); + if (!err && aligned_len > 4) + err = t3_seeprom_read(adapter, + aligned_offset + aligned_len - 4, + (u32 *) & buf[aligned_len - 4]); + if (err) + goto out; + memcpy(buf + (eeprom->offset & 3), data, eeprom->len); + } else + buf = data; + + err = t3_seeprom_wp(adapter, 0); + if (err) + goto out; + + for (p = (u32 *) buf; !err && aligned_len; aligned_len -= 4, p++) { + err = t3_seeprom_write(adapter, aligned_offset, *p); + aligned_offset += 4; + } + + if (!err) + err = t3_seeprom_wp(adapter, 1); +out: + if (buf != data) + kfree(buf); + return err; +} + +static void get_wol(struct net_device *dev, struct ethtool_wolinfo *wol) +{ + wol->supported = 0; + wol->wolopts = 0; + memset(&wol->sopass, 0, sizeof(wol->sopass)); +} + +static const struct ethtool_ops cxgb_ethtool_ops = { + .get_settings = get_settings, + .set_settings = set_settings, + .get_drvinfo = get_drvinfo, + .get_msglevel = get_msglevel, + .set_msglevel = set_msglevel, + .get_ringparam = get_sge_param, + .set_ringparam = set_sge_param, + .get_coalesce = get_coalesce, + .set_coalesce = set_coalesce, + .get_eeprom_len = get_eeprom_len, + .get_eeprom = get_eeprom, + .set_eeprom = set_eeprom, + .get_pauseparam = get_pauseparam, + .set_pauseparam = set_pauseparam, + .get_rx_csum = get_rx_csum, + .set_rx_csum = set_rx_csum, + .get_tx_csum = ethtool_op_get_tx_csum, + .set_tx_csum = ethtool_op_set_tx_csum, + .get_sg = ethtool_op_get_sg, + .set_sg = ethtool_op_set_sg, + .get_link = ethtool_op_get_link, + .get_strings = get_strings, + .phys_id = cxgb3_phys_id, + .nway_reset = restart_autoneg, + .get_stats_count = get_stats_count, + .get_ethtool_stats = get_stats, + .get_regs_len = get_regs_len, + .get_regs = get_regs, + .get_wol = get_wol, + .get_tso = ethtool_op_get_tso, + .set_tso = ethtool_op_set_tso, + .get_perm_addr = ethtool_op_get_perm_addr +}; + +static int in_range(int val, int lo, int hi) +{ + return val < 0 || (val <= hi && val >= lo); +} + +static int cxgb_extension_ioctl(struct net_device *dev, void __user *useraddr) +{ + int ret; + u32 cmd; + struct adapter *adapter = dev->priv; + + if (copy_from_user(&cmd, useraddr, sizeof(cmd))) + return -EFAULT; + + switch (cmd) { + case CHELSIO_SETREG:{ + struct ch_reg edata; + + if (!capable(CAP_NET_ADMIN)) + return -EPERM; + if (copy_from_user(&edata, useraddr, sizeof(edata))) + return -EFAULT; + if ((edata.addr & 3) != 0 + || edata.addr >= adapter->mmio_len) + return -EINVAL; + writel(edata.val, adapter->regs + edata.addr); + break; + } + case CHELSIO_GETREG:{ + struct ch_reg edata; + + if (copy_from_user(&edata, useraddr, sizeof(edata))) + return -EFAULT; + if ((edata.addr & 3) != 0 + || edata.addr >= adapter->mmio_len) + return -EINVAL; + edata.val = readl(adapter->regs + edata.addr); + if (copy_to_user(useraddr, &edata, sizeof(edata))) + return -EFAULT; + break; + } + case CHELSIO_SET_QSET_PARAMS:{ + int i; + struct qset_params *q; + struct ch_qset_params t; + + if (!capable(CAP_NET_ADMIN)) + return -EPERM; + if (copy_from_user(&t, useraddr, sizeof(t))) + return -EFAULT; + if (t.qset_idx >= SGE_QSETS) + return -EINVAL; + if (!in_range(t.intr_lat, 0, M_NEWTIMER) || + !in_range(t.cong_thres, 0, 255) || + !in_range(t.txq_size[0], MIN_TXQ_ENTRIES, + MAX_TXQ_ENTRIES) || + !in_range(t.txq_size[1], MIN_TXQ_ENTRIES, + MAX_TXQ_ENTRIES) || + !in_range(t.txq_size[2], MIN_CTRL_TXQ_ENTRIES, + MAX_CTRL_TXQ_ENTRIES) || + !in_range(t.fl_size[0], MIN_FL_ENTRIES, + MAX_RX_BUFFERS) + || !in_range(t.fl_size[1], MIN_FL_ENTRIES, + MAX_RX_JUMBO_BUFFERS) + || !in_range(t.rspq_size, MIN_RSPQ_ENTRIES, + MAX_RSPQ_ENTRIES)) + return -EINVAL; + if ((adapter->flags & FULL_INIT_DONE) && + (t.rspq_size >= 0 || t.fl_size[0] >= 0 || + t.fl_size[1] >= 0 || t.txq_size[0] >= 0 || + t.txq_size[1] >= 0 || t.txq_size[2] >= 0 || + t.polling >= 0 || t.cong_thres >= 0)) + return -EBUSY; + + q = &adapter->params.sge.qset[t.qset_idx]; + + if (t.rspq_size >= 0) + q->rspq_size = t.rspq_size; + if (t.fl_size[0] >= 0) + q->fl_size = t.fl_size[0]; + if (t.fl_size[1] >= 0) + q->jumbo_size = t.fl_size[1]; + if (t.txq_size[0] >= 0) + q->txq_size[0] = t.txq_size[0]; + if (t.txq_size[1] >= 0) + q->txq_size[1] = t.txq_size[1]; + if (t.txq_size[2] >= 0) + q->txq_size[2] = t.txq_size[2]; + if (t.cong_thres >= 0) + q->cong_thres = t.cong_thres; + if (t.intr_lat >= 0) { + struct sge_qset *qs = + &adapter->sge.qs[t.qset_idx]; + + q->coalesce_usecs = t.intr_lat; + t3_update_qset_coalesce(qs, q); + } + if (t.polling >= 0) { + if (adapter->flags & USING_MSIX) + q->polling = t.polling; + else { + /* No polling with INTx for T3A */ + if (adapter->params.rev == 0 && + !(adapter->flags & USING_MSI)) + t.polling = 0; + + for (i = 0; i < SGE_QSETS; i++) { + q = &adapter->params.sge. + qset[i]; + q->polling = t.polling; + } + } + } + break; + } + case CHELSIO_GET_QSET_PARAMS:{ + struct qset_params *q; + struct ch_qset_params t; + + if (copy_from_user(&t, useraddr, sizeof(t))) + return -EFAULT; + if (t.qset_idx >= SGE_QSETS) + return -EINVAL; + + q = &adapter->params.sge.qset[t.qset_idx]; + t.rspq_size = q->rspq_size; + t.txq_size[0] = q->txq_size[0]; + t.txq_size[1] = q->txq_size[1]; + t.txq_size[2] = q->txq_size[2]; + t.fl_size[0] = q->fl_size; + t.fl_size[1] = q->jumbo_size; + t.polling = q->polling; + t.intr_lat = q->coalesce_usecs; + t.cong_thres = q->cong_thres; + + if (copy_to_user(useraddr, &t, sizeof(t))) + return -EFAULT; + break; + } + case CHELSIO_SET_QSET_NUM:{ + struct ch_reg edata; + struct port_info *pi = netdev_priv(dev); + unsigned int i, first_qset = 0, other_qsets = 0; + + if (!capable(CAP_NET_ADMIN)) + return -EPERM; + if (adapter->flags & FULL_INIT_DONE) + return -EBUSY; + if (copy_from_user(&edata, useraddr, sizeof(edata))) + return -EFAULT; + if (edata.val < 1 || + (edata.val > 1 && !(adapter->flags & USING_MSIX))) + return -EINVAL; + + for_each_port(adapter, i) + if (adapter->port[i] && adapter->port[i] != dev) + other_qsets += adap2pinfo(adapter, i)->nqsets; + + if (edata.val + other_qsets > SGE_QSETS) + return -EINVAL; + + pi->nqsets = edata.val; + + for_each_port(adapter, i) + if (adapter->port[i]) { + pi = adap2pinfo(adapter, i); + pi->first_qset = first_qset; + first_qset += pi->nqsets; + } + break; + } + case CHELSIO_GET_QSET_NUM:{ + struct ch_reg edata; + struct port_info *pi = netdev_priv(dev); + + edata.cmd = CHELSIO_GET_QSET_NUM; + edata.val = pi->nqsets; + if (copy_to_user(useraddr, &edata, sizeof(edata))) + return -EFAULT; + break; + } + case CHELSIO_LOAD_FW:{ + u8 *fw_data; + struct ch_mem_range t; + + if (!capable(CAP_NET_ADMIN)) + return -EPERM; + if (copy_from_user(&t, useraddr, sizeof(t))) + return -EFAULT; + + fw_data = kmalloc(t.len, GFP_KERNEL); + if (!fw_data) + return -ENOMEM; + + if (copy_from_user + (fw_data, useraddr + sizeof(t), t.len)) { + kfree(fw_data); + return -EFAULT; + } + + ret = t3_load_fw(adapter, fw_data, t.len); + kfree(fw_data); + if (ret) + return ret; + break; + } + case CHELSIO_SETMTUTAB:{ + struct ch_mtus m; + int i; + + if (!is_offload(adapter)) + return -EOPNOTSUPP; + if (!capable(CAP_NET_ADMIN)) + return -EPERM; + if (offload_running(adapter)) + return -EBUSY; + if (copy_from_user(&m, useraddr, sizeof(m))) + return -EFAULT; + if (m.nmtus != NMTUS) + return -EINVAL; + if (m.mtus[0] < 81) /* accommodate SACK */ + return -EINVAL; + + /* MTUs must be in ascending order */ + for (i = 1; i < NMTUS; ++i) + if (m.mtus[i] < m.mtus[i - 1]) + return -EINVAL; + + memcpy(adapter->params.mtus, m.mtus, + sizeof(adapter->params.mtus)); + break; + } + case CHELSIO_GET_PM:{ + struct tp_params *p = &adapter->params.tp; + struct ch_pm m = {.cmd = CHELSIO_GET_PM }; + + if (!is_offload(adapter)) + return -EOPNOTSUPP; + m.tx_pg_sz = p->tx_pg_size; + m.tx_num_pg = p->tx_num_pgs; + m.rx_pg_sz = p->rx_pg_size; + m.rx_num_pg = p->rx_num_pgs; + m.pm_total = p->pmtx_size + p->chan_rx_size * p->nchan; + if (copy_to_user(useraddr, &m, sizeof(m))) + return -EFAULT; + break; + } + case CHELSIO_SET_PM:{ + struct ch_pm m; + struct tp_params *p = &adapter->params.tp; + + if (!is_offload(adapter)) + return -EOPNOTSUPP; + if (!capable(CAP_NET_ADMIN)) + return -EPERM; + if (adapter->flags & FULL_INIT_DONE) + return -EBUSY; + if (copy_from_user(&m, useraddr, sizeof(m))) + return -EFAULT; + if (!m.rx_pg_sz || (m.rx_pg_sz & (m.rx_pg_sz - 1)) || + !m.tx_pg_sz || (m.tx_pg_sz & (m.tx_pg_sz - 1))) + return -EINVAL; /* not power of 2 */ + if (!(m.rx_pg_sz & 0x14000)) + return -EINVAL; /* not 16KB or 64KB */ + if (!(m.tx_pg_sz & 0x1554000)) + return -EINVAL; + if (m.tx_num_pg == -1) + m.tx_num_pg = p->tx_num_pgs; + if (m.rx_num_pg == -1) + m.rx_num_pg = p->rx_num_pgs; + if (m.tx_num_pg % 24 || m.rx_num_pg % 24) + return -EINVAL; + if (m.rx_num_pg * m.rx_pg_sz > p->chan_rx_size || + m.tx_num_pg * m.tx_pg_sz > p->chan_tx_size) + return -EINVAL; + p->rx_pg_size = m.rx_pg_sz; + p->tx_pg_size = m.tx_pg_sz; + p->rx_num_pgs = m.rx_num_pg; + p->tx_num_pgs = m.tx_num_pg; + break; + } + case CHELSIO_GET_MEM:{ + struct ch_mem_range t; + struct mc7 *mem; + u64 buf[32]; + + if (!is_offload(adapter)) + return -EOPNOTSUPP; + if (!(adapter->flags & FULL_INIT_DONE)) + return -EIO; /* need the memory controllers */ + if (copy_from_user(&t, useraddr, sizeof(t))) + return -EFAULT; + if ((t.addr & 7) || (t.len & 7)) + return -EINVAL; + if (t.mem_id == MEM_CM) + mem = &adapter->cm; + else if (t.mem_id == MEM_PMRX) + mem = &adapter->pmrx; + else if (t.mem_id == MEM_PMTX) + mem = &adapter->pmtx; + else + return -EINVAL; + + /* + * Version scheme: + * bits 0..9: chip version + * bits 10..15: chip revision + */ + t.version = 3 | (adapter->params.rev << 10); + if (copy_to_user(useraddr, &t, sizeof(t))) + return -EFAULT; + + /* + * Read 256 bytes at a time as len can be large and we don't + * want to use huge intermediate buffers. + */ + useraddr += sizeof(t); /* advance to start of buffer */ + while (t.len) { + unsigned int chunk = + min_t(unsigned int, t.len, sizeof(buf)); + + ret = + t3_mc7_bd_read(mem, t.addr / 8, chunk / 8, + buf); + if (ret) + return ret; + if (copy_to_user(useraddr, buf, chunk)) + return -EFAULT; + useraddr += chunk; + t.addr += chunk; + t.len -= chunk; + } + break; + } + case CHELSIO_SET_TRACE_FILTER:{ + struct ch_trace t; + const struct trace_params *tp; + + if (!capable(CAP_NET_ADMIN)) + return -EPERM; + if (!offload_running(adapter)) + return -EAGAIN; + if (copy_from_user(&t, useraddr, sizeof(t))) + return -EFAULT; + + tp = (const struct trace_params *)&t.sip; + if (t.config_tx) + t3_config_trace_filter(adapter, tp, 0, + t.invert_match, + t.trace_tx); + if (t.config_rx) + t3_config_trace_filter(adapter, tp, 1, + t.invert_match, + t.trace_rx); + break; + } + case CHELSIO_SET_PKTSCHED:{ + struct sk_buff *skb; + struct ch_pktsched_params p; + struct mngt_pktsched_wr *req; + + if (!(adapter->flags & FULL_INIT_DONE)) + return -EIO; /* uP must be up and running */ + if (copy_from_user(&p, useraddr, sizeof(p))) + return -EFAULT; + skb = alloc_skb(sizeof(*req), GFP_KERNEL); + if (!skb) + return -ENOMEM; + req = + (struct mngt_pktsched_wr *)skb_put(skb, + sizeof(*req)); + req->wr_hi = htonl(V_WR_OP(FW_WROPCODE_MNGT)); + req->mngt_opcode = FW_MNGTOPCODE_PKTSCHED_SET; + req->sched = p.sched; + req->idx = p.idx; + req->min = p.min; + req->max = p.max; + req->binding = p.binding; + printk(KERN_INFO + "pktsched: sched %u idx %u min %u max %u binding %u\n", + req->sched, req->idx, req->min, req->max, + req->binding); + skb->priority = 1; + offload_tx(&adapter->tdev, skb); + break; + } + default: + return -EOPNOTSUPP; + } + return 0; +} + +static int cxgb_ioctl(struct net_device *dev, struct ifreq *req, int cmd) +{ + int ret, mmd; + struct adapter *adapter = dev->priv; + struct port_info *pi = netdev_priv(dev); + struct mii_ioctl_data *data = if_mii(req); + + switch (cmd) { + case SIOCGMIIPHY: + data->phy_id = pi->phy.addr; + /* FALLTHRU */ + case SIOCGMIIREG:{ + u32 val; + struct cphy *phy = &pi->phy; + + if (!phy->mdio_read) + return -EOPNOTSUPP; + if (is_10G(adapter)) { + mmd = data->phy_id >> 8; + if (!mmd) + mmd = MDIO_DEV_PCS; + else if (mmd > MDIO_DEV_XGXS) + return -EINVAL; + + ret = + phy->mdio_read(adapter, data->phy_id & 0x1f, + mmd, data->reg_num, &val); + } else + ret = + phy->mdio_read(adapter, data->phy_id & 0x1f, + 0, data->reg_num & 0x1f, + &val); + if (!ret) + data->val_out = val; + break; + } + case SIOCSMIIREG:{ + struct cphy *phy = &pi->phy; + + if (!capable(CAP_NET_ADMIN)) + return -EPERM; + if (!phy->mdio_write) + return -EOPNOTSUPP; + if (is_10G(adapter)) { + mmd = data->phy_id >> 8; + if (!mmd) + mmd = MDIO_DEV_PCS; + else if (mmd > MDIO_DEV_XGXS) + return -EINVAL; + + ret = + phy->mdio_write(adapter, + data->phy_id & 0x1f, mmd, + data->reg_num, + data->val_in); + } else + ret = + phy->mdio_write(adapter, + data->phy_id & 0x1f, 0, + data->reg_num & 0x1f, + data->val_in); + break; + } + case SIOCCHIOCTL: + return cxgb_extension_ioctl(dev, req->ifr_data); + default: + return -EOPNOTSUPP; + } + return ret; +} + +static int cxgb_change_mtu(struct net_device *dev, int new_mtu) +{ + int ret; + struct adapter *adapter = dev->priv; + struct port_info *pi = netdev_priv(dev); + + if (new_mtu < 81) /* accommodate SACK */ + return -EINVAL; + if ((ret = t3_mac_set_mtu(&pi->mac, new_mtu))) + return ret; + dev->mtu = new_mtu; + init_port_mtus(adapter); + if (adapter->params.rev == 0 && offload_running(adapter)) + t3_load_mtus(adapter, adapter->params.mtus, + adapter->params.a_wnd, adapter->params.b_wnd, + adapter->port[0]->mtu); + return 0; +} + +static int cxgb_set_mac_addr(struct net_device *dev, void *p) +{ + struct adapter *adapter = dev->priv; + struct port_info *pi = netdev_priv(dev); + struct sockaddr *addr = p; + + if (!is_valid_ether_addr(addr->sa_data)) + return -EINVAL; + + memcpy(dev->dev_addr, addr->sa_data, dev->addr_len); + t3_mac_set_address(&pi->mac, 0, dev->dev_addr); + if (offload_running(adapter)) + write_smt_entry(adapter, pi->port_id); + return 0; +} + +/** + * t3_synchronize_rx - wait for current Rx processing on a port to complete + * @adap: the adapter + * @p: the port + * + * Ensures that current Rx processing on any of the queues associated with + * the given port completes before returning. We do this by acquiring and + * releasing the locks of the response queues associated with the port. + */ +static void t3_synchronize_rx(struct adapter *adap, const struct port_info *p) +{ + int i; + + for (i = 0; i < p->nqsets; i++) { + struct sge_rspq *q = &adap->sge.qs[i + p->first_qset].rspq; + + spin_lock_irq(&q->lock); + spin_unlock_irq(&q->lock); + } +} + +static void vlan_rx_register(struct net_device *dev, struct vlan_group *grp) +{ + struct adapter *adapter = dev->priv; + struct port_info *pi = netdev_priv(dev); + + pi->vlan_grp = grp; + if (adapter->params.rev > 0) + t3_set_vlan_accel(adapter, 1 << pi->port_id, grp != NULL); + else { + /* single control for all ports */ + unsigned int i, have_vlans = 0; + for_each_port(adapter, i) + have_vlans |= adap2pinfo(adapter, i)->vlan_grp != NULL; + + t3_set_vlan_accel(adapter, 1, have_vlans); + } + t3_synchronize_rx(adapter, pi); +} + +static void vlan_rx_kill_vid(struct net_device *dev, unsigned short vid) +{ + /* nothing */ +} + +#ifdef CONFIG_NET_POLL_CONTROLLER +static void cxgb_netpoll(struct net_device *dev) +{ + struct adapter *adapter = dev->priv; + struct sge_qset *qs = dev2qset(dev); + + t3_intr_handler(adapter, qs->rspq.polling) (adapter->pdev->irq, + adapter); +} +#endif + +/* + * Periodic accumulation of MAC statistics. + */ +static void mac_stats_update(struct adapter *adapter) +{ + int i; + + for_each_port(adapter, i) { + struct net_device *dev = adapter->port[i]; + struct port_info *p = netdev_priv(dev); + + if (netif_running(dev)) { + spin_lock(&adapter->stats_lock); + t3_mac_update_stats(&p->mac); + spin_unlock(&adapter->stats_lock); + } + } +} + +static void check_link_status(struct adapter *adapter) +{ + int i; + + for_each_port(adapter, i) { + struct net_device *dev = adapter->port[i]; + struct port_info *p = netdev_priv(dev); + + if (!(p->port_type->caps & SUPPORTED_IRQ) && netif_running(dev)) + t3_link_changed(adapter, i); + } +} + +static void t3_adap_check_task(struct work_struct *work) +{ + struct adapter *adapter = container_of(work, struct adapter, + adap_check_task.work); + const struct adapter_params *p = &adapter->params; + + adapter->check_task_cnt++; + + /* Check link status for PHYs without interrupts */ + if (p->linkpoll_period) + check_link_status(adapter); + + /* Accumulate MAC stats if needed */ + if (!p->linkpoll_period || + (adapter->check_task_cnt * p->linkpoll_period) / 10 >= + p->stats_update_period) { + mac_stats_update(adapter); + adapter->check_task_cnt = 0; + } + + /* Schedule the next check update if any port is active. */ + spin_lock(&adapter->work_lock); + if (adapter->open_device_map & PORT_MASK) + schedule_chk_task(adapter); + spin_unlock(&adapter->work_lock); +} + +/* + * Processes external (PHY) interrupts in process context. + */ +static void ext_intr_task(struct work_struct *work) +{ + struct adapter *adapter = container_of(work, struct adapter, + ext_intr_handler_task); + + t3_phy_intr_handler(adapter); + + /* Now reenable external interrupts */ + spin_lock_irq(&adapter->work_lock); + if (adapter->slow_intr_mask) { + adapter->slow_intr_mask |= F_T3DBG; + t3_write_reg(adapter, A_PL_INT_CAUSE0, F_T3DBG); + t3_write_reg(adapter, A_PL_INT_ENABLE0, + adapter->slow_intr_mask); + } + spin_unlock_irq(&adapter->work_lock); +} + +/* + * Interrupt-context handler for external (PHY) interrupts. + */ +void t3_os_ext_intr_handler(struct adapter *adapter) +{ + /* + * Schedule a task to handle external interrupts as they may be slow + * and we use a mutex to protect MDIO registers. We disable PHY + * interrupts in the meantime and let the task reenable them when + * it's done. + */ + spin_lock(&adapter->work_lock); + if (adapter->slow_intr_mask) { + adapter->slow_intr_mask &= ~F_T3DBG; + t3_write_reg(adapter, A_PL_INT_ENABLE0, + adapter->slow_intr_mask); + queue_work(cxgb3_wq, &adapter->ext_intr_handler_task); + } + spin_unlock(&adapter->work_lock); +} + +void t3_fatal_err(struct adapter *adapter) +{ + unsigned int fw_status[4]; + + if (adapter->flags & FULL_INIT_DONE) { + t3_sge_stop(adapter); + t3_intr_disable(adapter); + } + CH_ALERT(adapter, "encountered fatal error, operation suspended\n"); + if (!t3_cim_ctl_blk_read(adapter, 0xa0, 4, fw_status)) + CH_ALERT(adapter, "FW status: 0x%x, 0x%x, 0x%x, 0x%x\n", + fw_status[0], fw_status[1], + fw_status[2], fw_status[3]); + +} + +static int __devinit cxgb_enable_msix(struct adapter *adap) +{ + struct msix_entry entries[SGE_QSETS + 1]; + int i, err; + + for (i = 0; i < ARRAY_SIZE(entries); ++i) + entries[i].entry = i; + + err = pci_enable_msix(adap->pdev, entries, ARRAY_SIZE(entries)); + if (!err) { + for (i = 0; i < ARRAY_SIZE(entries); ++i) + adap->msix_info[i].vec = entries[i].vector; + } else if (err > 0) + dev_info(&adap->pdev->dev, + "only %d MSI-X vectors left, not using MSI-X\n", err); + return err; +} + +static void __devinit print_port_info(struct adapter *adap, + const struct adapter_info *ai) +{ + static const char *pci_variant[] = { + "PCI", "PCI-X", "PCI-X ECC", "PCI-X 266", "PCI Express" + }; + + int i; + char buf[80]; + + if (is_pcie(adap)) + snprintf(buf, sizeof(buf), "%s x%d", + pci_variant[adap->params.pci.variant], + adap->params.pci.width); + else + snprintf(buf, sizeof(buf), "%s %dMHz/%d-bit", + pci_variant[adap->params.pci.variant], + adap->params.pci.speed, adap->params.pci.width); + + for_each_port(adap, i) { + struct net_device *dev = adap->port[i]; + const struct port_info *pi = netdev_priv(dev); + + if (!test_bit(i, &adap->registered_device_map)) + continue; + printk(KERN_INFO "%s: %s %s RNIC (rev %d) %s%s\n", + dev->name, ai->desc, pi->port_type->desc, + adap->params.rev, buf, + (adap->flags & USING_MSIX) ? " MSI-X" : + (adap->flags & USING_MSI) ? " MSI" : ""); + if (adap->name == dev->name && adap->params.vpd.mclk) + printk(KERN_INFO "%s: %uMB CM, %uMB PMTX, %uMB PMRX\n", + adap->name, t3_mc7_size(&adap->cm) >> 20, + t3_mc7_size(&adap->pmtx) >> 20, + t3_mc7_size(&adap->pmrx) >> 20); + } +} + +static int __devinit init_one(struct pci_dev *pdev, + const struct pci_device_id *ent) +{ + static int version_printed; + + int i, err, pci_using_dac = 0; + unsigned long mmio_start, mmio_len; + const struct adapter_info *ai; + struct adapter *adapter = NULL; + struct port_info *pi; + + if (!version_printed) { + printk(KERN_INFO "%s - version %s\n", DRV_DESC, DRV_VERSION); + ++version_printed; + } + + if (!cxgb3_wq) { + cxgb3_wq = create_singlethread_workqueue(DRV_NAME); + if (!cxgb3_wq) { + printk(KERN_ERR DRV_NAME + ": cannot initialize work queue\n"); + return -ENOMEM; + } + } + + err = pci_request_regions(pdev, DRV_NAME); + if (err) { + /* Just info, some other driver may have claimed the device. */ + dev_info(&pdev->dev, "cannot obtain PCI resources\n"); + return err; + } + + err = pci_enable_device(pdev); + if (err) { + dev_err(&pdev->dev, "cannot enable PCI device\n"); + goto out_release_regions; + } + + if (!pci_set_dma_mask(pdev, DMA_64BIT_MASK)) { + pci_using_dac = 1; + err = pci_set_consistent_dma_mask(pdev, DMA_64BIT_MASK); + if (err) { + dev_err(&pdev->dev, "unable to obtain 64-bit DMA for " + "coherent allocations\n"); + goto out_disable_device; + } + } else if ((err = pci_set_dma_mask(pdev, DMA_32BIT_MASK)) != 0) { + dev_err(&pdev->dev, "no usable DMA configuration\n"); + goto out_disable_device; + } + + pci_set_master(pdev); + + mmio_start = pci_resource_start(pdev, 0); + mmio_len = pci_resource_len(pdev, 0); + ai = t3_get_adapter_info(ent->driver_data); + + adapter = kzalloc(sizeof(*adapter), GFP_KERNEL); + if (!adapter) { + err = -ENOMEM; + goto out_disable_device; + } + + adapter->regs = ioremap_nocache(mmio_start, mmio_len); + if (!adapter->regs) { + dev_err(&pdev->dev, "cannot map device registers\n"); + err = -ENOMEM; + goto out_free_adapter; + } + + adapter->pdev = pdev; + adapter->name = pci_name(pdev); + adapter->msg_enable = dflt_msg_enable; + adapter->mmio_len = mmio_len; + + mutex_init(&adapter->mdio_lock); + spin_lock_init(&adapter->work_lock); + spin_lock_init(&adapter->stats_lock); + + INIT_LIST_HEAD(&adapter->adapter_list); + INIT_WORK(&adapter->ext_intr_handler_task, ext_intr_task); + INIT_DELAYED_WORK(&adapter->adap_check_task, t3_adap_check_task); + + for (i = 0; i < ai->nports; ++i) { + struct net_device *netdev; + + netdev = alloc_etherdev(sizeof(struct port_info)); + if (!netdev) { + err = -ENOMEM; + goto out_free_dev; + } + + SET_MODULE_OWNER(netdev); + SET_NETDEV_DEV(netdev, &pdev->dev); + + adapter->port[i] = netdev; + pi = netdev_priv(netdev); + pi->rx_csum_offload = 1; + pi->nqsets = 1; + pi->first_qset = i; + pi->activity = 0; + pi->port_id = i; + netif_carrier_off(netdev); + netdev->irq = pdev->irq; + netdev->mem_start = mmio_start; + netdev->mem_end = mmio_start + mmio_len - 1; + netdev->priv = adapter; + netdev->features |= NETIF_F_SG | NETIF_F_IP_CSUM | NETIF_F_TSO; + netdev->features |= NETIF_F_LLTX; + if (pci_using_dac) + netdev->features |= NETIF_F_HIGHDMA; + + netdev->features |= NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX; + netdev->vlan_rx_register = vlan_rx_register; + netdev->vlan_rx_kill_vid = vlan_rx_kill_vid; + + netdev->open = cxgb_open; + netdev->stop = cxgb_close; + netdev->hard_start_xmit = t3_eth_xmit; + netdev->get_stats = cxgb_get_stats; + netdev->set_multicast_list = cxgb_set_rxmode; + netdev->do_ioctl = cxgb_ioctl; + netdev->change_mtu = cxgb_change_mtu; + netdev->set_mac_address = cxgb_set_mac_addr; +#ifdef CONFIG_NET_POLL_CONTROLLER + netdev->poll_controller = cxgb_netpoll; +#endif + netdev->weight = 64; + + SET_ETHTOOL_OPS(netdev, &cxgb_ethtool_ops); + } + + pci_set_drvdata(pdev, adapter->port[0]); + if (t3_prep_adapter(adapter, ai, 1) < 0) { + err = -ENODEV; + goto out_free_dev; + } + + /* + * The card is now ready to go. If any errors occur during device + * registration we do not fail the whole card but rather proceed only + * with the ports we manage to register successfully. However we must + * register at least one net device. + */ + for_each_port(adapter, i) { + err = register_netdev(adapter->port[i]); + if (err) + dev_warn(&pdev->dev, + "cannot register net device %s, skipping\n", + adapter->port[i]->name); + else { + /* + * Change the name we use for messages to the name of + * the first successfully registered interface. + */ + if (!adapter->registered_device_map) + adapter->name = adapter->port[i]->name; + + __set_bit(i, &adapter->registered_device_map); + } + } + if (!adapter->registered_device_map) { + dev_err(&pdev->dev, "could not register any net devices\n"); + goto out_free_dev; + } + + /* Driver's ready. Reflect it on LEDs */ + t3_led_ready(adapter); + + if (is_offload(adapter)) { + __set_bit(OFFLOAD_DEVMAP_BIT, &adapter->registered_device_map); + cxgb3_adapter_ofld(adapter); + } + + /* See what interrupts we'll be using */ + if (msi > 1 && cxgb_enable_msix(adapter) == 0) + adapter->flags |= USING_MSIX; + else if (msi > 0 && pci_enable_msi(pdev) == 0) + adapter->flags |= USING_MSI; + + err = sysfs_create_group(&adapter->port[0]->class_dev.kobj, + &cxgb3_attr_group); + + print_port_info(adapter, ai); + return 0; + +out_free_dev: + iounmap(adapter->regs); + for (i = ai->nports - 1; i >= 0; --i) + if (adapter->port[i]) + free_netdev(adapter->port[i]); + +out_free_adapter: + kfree(adapter); + +out_disable_device: + pci_disable_device(pdev); +out_release_regions: + pci_release_regions(pdev); + pci_set_drvdata(pdev, NULL); + return err; +} + +static void __devexit remove_one(struct pci_dev *pdev) +{ + struct net_device *dev = pci_get_drvdata(pdev); + + if (dev) { + int i; + struct adapter *adapter = dev->priv; + + t3_sge_stop(adapter); + sysfs_remove_group(&adapter->port[0]->class_dev.kobj, + &cxgb3_attr_group); + + for_each_port(adapter, i) + if (test_bit(i, &adapter->registered_device_map)) + unregister_netdev(adapter->port[i]); + + if (is_offload(adapter)) { + cxgb3_adapter_unofld(adapter); + if (test_bit(OFFLOAD_DEVMAP_BIT, + &adapter->open_device_map)) + offload_close(&adapter->tdev); + } + + t3_free_sge_resources(adapter); + cxgb_disable_msi(adapter); + + for (i = 0; i < ARRAY_SIZE(adapter->dummy_netdev); i++) + if (adapter->dummy_netdev[i]) { + free_netdev(adapter->dummy_netdev[i]); + adapter->dummy_netdev[i] = NULL; + } + + for_each_port(adapter, i) + if (adapter->port[i]) + free_netdev(adapter->port[i]); + + iounmap(adapter->regs); + kfree(adapter); + pci_release_regions(pdev); + pci_disable_device(pdev); + pci_set_drvdata(pdev, NULL); + } +} + +static struct pci_driver driver = { + .name = DRV_NAME, + .id_table = cxgb3_pci_tbl, + .probe = init_one, + .remove = __devexit_p(remove_one), +}; + +static int __init cxgb3_init_module(void) +{ + int ret; + + cxgb3_offload_init(); + + ret = pci_register_driver(&driver); + return ret; +} + +static void __exit cxgb3_cleanup_module(void) +{ + pci_unregister_driver(&driver); + if (cxgb3_wq) + destroy_workqueue(cxgb3_wq); +} + +module_init(cxgb3_init_module); +module_exit(cxgb3_cleanup_module); diff --git a/drivers/net/cxgb3/cxgb3_offload.c b/drivers/net/cxgb3/cxgb3_offload.c new file mode 100644 index 00000000000..3abd4d25c3b --- /dev/null +++ b/drivers/net/cxgb3/cxgb3_offload.c @@ -0,0 +1,1222 @@ +/* + * Copyright (c) 2006 Chelsio, Inc. All rights reserved. + * Copyright (c) 2006 Open Grid Computing, Inc. All rights reserved. + * + * This software is available to you under a choice of one of two + * licenses. You may choose to be licensed under the terms of the GNU + * General Public License (GPL) Version 2, available from the file + * COPYING in the main directory of this source tree, or the + * OpenIB.org BSD license below: + * + * Redistribution and use in source and binary forms, with or + * without modification, are permitted provided that the following + * conditions are met: + * + * - Redistributions of source code must retain the above + * copyright notice, this list of conditions and the following + * disclaimer. + * + * - Redistributions in binary form must reproduce the above + * copyright notice, this list of conditions and the following + * disclaimer in the documentation and/or other materials + * provided with the distribution. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + */ + +#include <linux/list.h> +#include <net/neighbour.h> +#include <linux/notifier.h> +#include <asm/atomic.h> +#include <linux/proc_fs.h> +#include <linux/if_vlan.h> +#include <net/netevent.h> +#include <linux/highmem.h> +#include <linux/vmalloc.h> + +#include "common.h" +#include "regs.h" +#include "cxgb3_ioctl.h" +#include "cxgb3_ctl_defs.h" +#include "cxgb3_defs.h" +#include "l2t.h" +#include "firmware_exports.h" +#include "cxgb3_offload.h" + +static LIST_HEAD(client_list); +static LIST_HEAD(ofld_dev_list); +static DEFINE_MUTEX(cxgb3_db_lock); + +static DEFINE_RWLOCK(adapter_list_lock); +static LIST_HEAD(adapter_list); + +static const unsigned int MAX_ATIDS = 64 * 1024; +static const unsigned int ATID_BASE = 0x100000; + +static inline int offload_activated(struct t3cdev *tdev) +{ + const struct adapter *adapter = tdev2adap(tdev); + + return (test_bit(OFFLOAD_DEVMAP_BIT, &adapter->open_device_map)); +} + +/** + * cxgb3_register_client - register an offload client + * @client: the client + * + * Add the client to the client list, + * and call backs the client for each activated offload device + */ +void cxgb3_register_client(struct cxgb3_client *client) +{ + struct t3cdev *tdev; + + mutex_lock(&cxgb3_db_lock); + list_add_tail(&client->client_list, &client_list); + + if (client->add) { + list_for_each_entry(tdev, &ofld_dev_list, ofld_dev_list) { + if (offload_activated(tdev)) + client->add(tdev); + } + } + mutex_unlock(&cxgb3_db_lock); +} + +EXPORT_SYMBOL(cxgb3_register_client); + +/** + * cxgb3_unregister_client - unregister an offload client + * @client: the client + * + * Remove the client to the client list, + * and call backs the client for each activated offload device. + */ +void cxgb3_unregister_client(struct cxgb3_client *client) +{ + struct t3cdev *tdev; + + mutex_lock(&cxgb3_db_lock); + list_del(&client->client_list); + + if (client->remove) { + list_for_each_entry(tdev, &ofld_dev_list, ofld_dev_list) { + if (offload_activated(tdev)) + client->remove(tdev); + } + } + mutex_unlock(&cxgb3_db_lock); +} + +EXPORT_SYMBOL(cxgb3_unregister_client); + +/** + * cxgb3_add_clients - activate registered clients for an offload device + * @tdev: the offload device + * + * Call backs all registered clients once a offload device is activated + */ +void cxgb3_add_clients(struct t3cdev *tdev) +{ + struct cxgb3_client *client; + + mutex_lock(&cxgb3_db_lock); + list_for_each_entry(client, &client_list, client_list) { + if (client->add) + client->add(tdev); + } + mutex_unlock(&cxgb3_db_lock); +} + +/** + * cxgb3_remove_clients - deactivates registered clients + * for an offload device + * @tdev: the offload device + * + * Call backs all registered clients once a offload device is deactivated + */ +void cxgb3_remove_clients(struct t3cdev *tdev) +{ + struct cxgb3_client *client; + + mutex_lock(&cxgb3_db_lock); + list_for_each_entry(client, &client_list, client_list) { + if (client->remove) + client->remove(tdev); + } + mutex_unlock(&cxgb3_db_lock); +} + +static struct net_device *get_iff_from_mac(struct adapter *adapter, + const unsigned char *mac, + unsigned int vlan) +{ + int i; + + for_each_port(adapter, i) { + const struct vlan_group *grp; + struct net_device *dev = adapter->port[i]; + const struct port_info *p = netdev_priv(dev); + + if (!memcmp(dev->dev_addr, mac, ETH_ALEN)) { + if (vlan && vlan != VLAN_VID_MASK) { + grp = p->vlan_grp; + dev = grp ? grp->vlan_devices[vlan] : NULL; + } else + while (dev->master) + dev = dev->master; + return dev; + } + } + return NULL; +} + +static int cxgb_ulp_iscsi_ctl(struct adapter *adapter, unsigned int req, + void *data) +{ + int ret = 0; + struct ulp_iscsi_info *uiip = data; + + switch (req) { + case ULP_ISCSI_GET_PARAMS: + uiip->pdev = adapter->pdev; + uiip->llimit = t3_read_reg(adapter, A_ULPRX_ISCSI_LLIMIT); + uiip->ulimit = t3_read_reg(adapter, A_ULPRX_ISCSI_ULIMIT); + uiip->tagmask = t3_read_reg(adapter, A_ULPRX_ISCSI_TAGMASK); + /* + * On tx, the iscsi pdu has to be <= tx page size and has to + * fit into the Tx PM FIFO. + */ + uiip->max_txsz = min(adapter->params.tp.tx_pg_size, + t3_read_reg(adapter, A_PM1_TX_CFG) >> 17); + /* on rx, the iscsi pdu has to be < rx page size and the + whole pdu + cpl headers has to fit into one sge buffer */ + uiip->max_rxsz = min_t(unsigned int, + adapter->params.tp.rx_pg_size, + (adapter->sge.qs[0].fl[1].buf_size - + sizeof(struct cpl_rx_data) * 2 - + sizeof(struct cpl_rx_data_ddp))); + break; + case ULP_ISCSI_SET_PARAMS: + t3_write_reg(adapter, A_ULPRX_ISCSI_TAGMASK, uiip->tagmask); + break; + default: + ret = -EOPNOTSUPP; + } + return ret; +} + +/* Response queue used for RDMA events. */ +#define ASYNC_NOTIF_RSPQ 0 + +static int cxgb_rdma_ctl(struct adapter *adapter, unsigned int req, void *data) +{ + int ret = 0; + + switch (req) { + case RDMA_GET_PARAMS:{ + struct rdma_info *req = data; + struct pci_dev *pdev = adapter->pdev; + + req->udbell_physbase = pci_resource_start(pdev, 2); + req->udbell_len = pci_resource_len(pdev, 2); + req->tpt_base = + t3_read_reg(adapter, A_ULPTX_TPT_LLIMIT); + req->tpt_top = t3_read_reg(adapter, A_ULPTX_TPT_ULIMIT); + req->pbl_base = + t3_read_reg(adapter, A_ULPTX_PBL_LLIMIT); + req->pbl_top = t3_read_reg(adapter, A_ULPTX_PBL_ULIMIT); + req->rqt_base = t3_read_reg(adapter, A_ULPRX_RQ_LLIMIT); + req->rqt_top = t3_read_reg(adapter, A_ULPRX_RQ_ULIMIT); + req->kdb_addr = adapter->regs + A_SG_KDOORBELL; + req->pdev = pdev; + break; + } + case RDMA_CQ_OP:{ + unsigned long flags; + struct rdma_cq_op *req = data; + + /* may be called in any context */ + spin_lock_irqsave(&adapter->sge.reg_lock, flags); + ret = t3_sge_cqcntxt_op(adapter, req->id, req->op, + req->credits); + spin_unlock_irqrestore(&adapter->sge.reg_lock, flags); + break; + } + case RDMA_GET_MEM:{ + struct ch_mem_range *t = data; + struct mc7 *mem; + + if ((t->addr & 7) || (t->len & 7)) + return -EINVAL; + if (t->mem_id == MEM_CM) + mem = &adapter->cm; + else if (t->mem_id == MEM_PMRX) + mem = &adapter->pmrx; + else if (t->mem_id == MEM_PMTX) + mem = &adapter->pmtx; + else + return -EINVAL; + + ret = + t3_mc7_bd_read(mem, t->addr / 8, t->len / 8, + (u64 *) t->buf); + if (ret) + return ret; + break; + } + case RDMA_CQ_SETUP:{ + struct rdma_cq_setup *req = data; + + spin_lock_irq(&adapter->sge.reg_lock); + ret = + t3_sge_init_cqcntxt(adapter, req->id, + req->base_addr, req->size, + ASYNC_NOTIF_RSPQ, + req->ovfl_mode, req->credits, + req->credit_thres); + spin_unlock_irq(&adapter->sge.reg_lock); + break; + } + case RDMA_CQ_DISABLE: + spin_lock_irq(&adapter->sge.reg_lock); + ret = t3_sge_disable_cqcntxt(adapter, *(unsigned int *)data); + spin_unlock_irq(&adapter->sge.reg_lock); + break; + case RDMA_CTRL_QP_SETUP:{ + struct rdma_ctrlqp_setup *req = data; + + spin_lock_irq(&adapter->sge.reg_lock); + ret = t3_sge_init_ecntxt(adapter, FW_RI_SGEEC_START, 0, + SGE_CNTXT_RDMA, + ASYNC_NOTIF_RSPQ, + req->base_addr, req->size, + FW_RI_TID_START, 1, 0); + spin_unlock_irq(&adapter->sge.reg_lock); + break; + } + default: + ret = -EOPNOTSUPP; + } + return ret; +} + +static int cxgb_offload_ctl(struct t3cdev *tdev, unsigned int req, void *data) +{ + struct adapter *adapter = tdev2adap(tdev); + struct tid_range *tid; + struct mtutab *mtup; + struct iff_mac *iffmacp; + struct ddp_params *ddpp; + struct adap_ports *ports; + int i; + + switch (req) { + case GET_MAX_OUTSTANDING_WR: + *(unsigned int *)data = FW_WR_NUM; + break; + case GET_WR_LEN: + *(unsigned int *)data = WR_FLITS; + break; + case GET_TX_MAX_CHUNK: + *(unsigned int *)data = 1 << 20; /* 1MB */ + break; + case GET_TID_RANGE: + tid = data; + tid->num = t3_mc5_size(&adapter->mc5) - + adapter->params.mc5.nroutes - + adapter->params.mc5.nfilters - adapter->params.mc5.nservers; + tid->base = 0; + break; + case GET_STID_RANGE: + tid = data; + tid->num = adapter->params.mc5.nservers; + tid->base = t3_mc5_size(&adapter->mc5) - tid->num - + adapter->params.mc5.nfilters - adapter->params.mc5.nroutes; + break; + case GET_L2T_CAPACITY: + *(unsigned int *)data = 2048; + break; + case GET_MTUS: + mtup = data; + mtup->size = NMTUS; + mtup->mtus = adapter->params.mtus; + break; + case GET_IFF_FROM_MAC: + iffmacp = data; + iffmacp->dev = get_iff_from_mac(adapter, iffmacp->mac_addr, + iffmacp->vlan_tag & + VLAN_VID_MASK); + break; + case GET_DDP_PARAMS: + ddpp = data; + ddpp->llimit = t3_read_reg(adapter, A_ULPRX_TDDP_LLIMIT); + ddpp->ulimit = t3_read_reg(adapter, A_ULPRX_TDDP_ULIMIT); + ddpp->tag_mask = t3_read_reg(adapter, A_ULPRX_TDDP_TAGMASK); + break; + case GET_PORTS: + ports = data; + ports->nports = adapter->params.nports; + for_each_port(adapter, i) + ports->lldevs[i] = adapter->port[i]; + break; + case ULP_ISCSI_GET_PARAMS: + case ULP_ISCSI_SET_PARAMS: + if (!offload_running(adapter)) + return -EAGAIN; + return cxgb_ulp_iscsi_ctl(adapter, req, data); + case RDMA_GET_PARAMS: + case RDMA_CQ_OP: + case RDMA_CQ_SETUP: + case RDMA_CQ_DISABLE: + case RDMA_CTRL_QP_SETUP: + case RDMA_GET_MEM: + if (!offload_running(adapter)) + return -EAGAIN; + return cxgb_rdma_ctl(adapter, req, data); + default: + return -EOPNOTSUPP; + } + return 0; +} + +/* + * Dummy handler for Rx offload packets in case we get an offload packet before + * proper processing is setup. This complains and drops the packet as it isn't + * normal to get offload packets at this stage. + */ +static int rx_offload_blackhole(struct t3cdev *dev, struct sk_buff **skbs, + int n) +{ + CH_ERR(tdev2adap(dev), "%d unexpected offload packets, first data %u\n", + n, ntohl(*(u32 *)skbs[0]->data)); + while (n--) + dev_kfree_skb_any(skbs[n]); + return 0; +} + +static void dummy_neigh_update(struct t3cdev *dev, struct neighbour *neigh) +{ +} + +void cxgb3_set_dummy_ops(struct t3cdev *dev) +{ + dev->recv = rx_offload_blackhole; + dev->neigh_update = dummy_neigh_update; +} + +/* + * Free an active-open TID. + */ +void *cxgb3_free_atid(struct t3cdev *tdev, int atid) +{ + struct tid_info *t = &(T3C_DATA(tdev))->tid_maps; + union active_open_entry *p = atid2entry(t, atid); + void *ctx = p->t3c_tid.ctx; + + spin_lock_bh(&t->atid_lock); + p->next = t->afree; + t->afree = p; + t->atids_in_use--; + spin_unlock_bh(&t->atid_lock); + + return ctx; +} + +EXPORT_SYMBOL(cxgb3_free_atid); + +/* + * Free a server TID and return it to the free pool. + */ +void cxgb3_free_stid(struct t3cdev *tdev, int stid) +{ + struct tid_info *t = &(T3C_DATA(tdev))->tid_maps; + union listen_entry *p = stid2entry(t, stid); + + spin_lock_bh(&t->stid_lock); + p->next = t->sfree; + t->sfree = p; + t->stids_in_use--; + spin_unlock_bh(&t->stid_lock); +} + +EXPORT_SYMBOL(cxgb3_free_stid); + +void cxgb3_insert_tid(struct t3cdev *tdev, struct cxgb3_client *client, + void *ctx, unsigned int tid) +{ + struct tid_info *t = &(T3C_DATA(tdev))->tid_maps; + + t->tid_tab[tid].client = client; + t->tid_tab[tid].ctx = ctx; + atomic_inc(&t->tids_in_use); +} + +EXPORT_SYMBOL(cxgb3_insert_tid); + +/* + * Populate a TID_RELEASE WR. The skb must be already propely sized. + */ +static inline void mk_tid_release(struct sk_buff *skb, unsigned int tid) +{ + struct cpl_tid_release *req; + + skb->priority = CPL_PRIORITY_SETUP; + req = (struct cpl_tid_release *)__skb_put(skb, sizeof(*req)); + req->wr.wr_hi = htonl(V_WR_OP(FW_WROPCODE_FORWARD)); + OPCODE_TID(req) = htonl(MK_OPCODE_TID(CPL_TID_RELEASE, tid)); +} + +static void t3_process_tid_release_list(struct work_struct *work) +{ + struct t3c_data *td = container_of(work, struct t3c_data, + tid_release_task); + struct sk_buff *skb; + struct t3cdev *tdev = td->dev; + + + spin_lock_bh(&td->tid_release_lock); + while (td->tid_release_list) { + struct t3c_tid_entry *p = td->tid_release_list; + + td->tid_release_list = (struct t3c_tid_entry *)p->ctx; + spin_unlock_bh(&td->tid_release_lock); + + skb = alloc_skb(sizeof(struct cpl_tid_release), + GFP_KERNEL | __GFP_NOFAIL); + mk_tid_release(skb, p - td->tid_maps.tid_tab); + cxgb3_ofld_send(tdev, skb); + p->ctx = NULL; + spin_lock_bh(&td->tid_release_lock); + } + spin_unlock_bh(&td->tid_release_lock); +} + +/* use ctx as a next pointer in the tid release list */ +void cxgb3_queue_tid_release(struct t3cdev *tdev, unsigned int tid) +{ + struct t3c_data *td = T3C_DATA(tdev); + struct t3c_tid_entry *p = &td->tid_maps.tid_tab[tid]; + + spin_lock_bh(&td->tid_release_lock); + p->ctx = (void *)td->tid_release_list; + td->tid_release_list = p; + if (!p->ctx) + schedule_work(&td->tid_release_task); + spin_unlock_bh(&td->tid_release_lock); +} + +EXPORT_SYMBOL(cxgb3_queue_tid_release); + +/* + * Remove a tid from the TID table. A client may defer processing its last + * CPL message if it is locked at the time it arrives, and while the message + * sits in the client's backlog the TID may be reused for another connection. + * To handle this we atomically switch the TID association if it still points + * to the original client context. + */ +void cxgb3_remove_tid(struct t3cdev *tdev, void *ctx, unsigned int tid) +{ + struct tid_info *t = &(T3C_DATA(tdev))->tid_maps; + + BUG_ON(tid >= t->ntids); + if (tdev->type == T3A) + (void)cmpxchg(&t->tid_tab[tid].ctx, ctx, NULL); + else { + struct sk_buff *skb; + + skb = alloc_skb(sizeof(struct cpl_tid_release), GFP_ATOMIC); + if (likely(skb)) { + mk_tid_release(skb, tid); + cxgb3_ofld_send(tdev, skb); + t->tid_tab[tid].ctx = NULL; + } else + cxgb3_queue_tid_release(tdev, tid); + } + atomic_dec(&t->tids_in_use); +} + +EXPORT_SYMBOL(cxgb3_remove_tid); + +int cxgb3_alloc_atid(struct t3cdev *tdev, struct cxgb3_client *client, + void *ctx) +{ + int atid = -1; + struct tid_info *t = &(T3C_DATA(tdev))->tid_maps; + + spin_lock_bh(&t->atid_lock); + if (t->afree) { + union active_open_entry *p = t->afree; + + atid = (p - t->atid_tab) + t->atid_base; + t->afree = p->next; + p->t3c_tid.ctx = ctx; + p->t3c_tid.client = client; + t->atids_in_use++; + } + spin_unlock_bh(&t->atid_lock); + return atid; +} + +EXPORT_SYMBOL(cxgb3_alloc_atid); + +int cxgb3_alloc_stid(struct t3cdev *tdev, struct cxgb3_client *client, + void *ctx) +{ + int stid = -1; + struct tid_info *t = &(T3C_DATA(tdev))->tid_maps; + + spin_lock_bh(&t->stid_lock); + if (t->sfree) { + union listen_entry *p = t->sfree; + + stid = (p - t->stid_tab) + t->stid_base; + t->sfree = p->next; + p->t3c_tid.ctx = ctx; + p->t3c_tid.client = client; + t->stids_in_use++; + } + spin_unlock_bh(&t->stid_lock); + return stid; +} + +EXPORT_SYMBOL(cxgb3_alloc_stid); + +static int do_smt_write_rpl(struct t3cdev *dev, struct sk_buff *skb) +{ + struct cpl_smt_write_rpl *rpl = cplhdr(skb); + + if (rpl->status != CPL_ERR_NONE) + printk(KERN_ERR + "Unexpected SMT_WRITE_RPL status %u for entry %u\n", + rpl->status, GET_TID(rpl)); + + return CPL_RET_BUF_DONE; +} + +static int do_l2t_write_rpl(struct t3cdev *dev, struct sk_buff *skb) +{ + struct cpl_l2t_write_rpl *rpl = cplhdr(skb); + + if (rpl->status != CPL_ERR_NONE) + printk(KERN_ERR + "Unexpected L2T_WRITE_RPL status %u for entry %u\n", + rpl->status, GET_TID(rpl)); + + return CPL_RET_BUF_DONE; +} + +static int do_act_open_rpl(struct t3cdev *dev, struct sk_buff *skb) +{ + struct cpl_act_open_rpl *rpl = cplhdr(skb); + unsigned int atid = G_TID(ntohl(rpl->atid)); + struct t3c_tid_entry *t3c_tid; + + t3c_tid = lookup_atid(&(T3C_DATA(dev))->tid_maps, atid); + if (t3c_tid->ctx && t3c_tid->client && t3c_tid->client->handlers && + t3c_tid->client->handlers[CPL_ACT_OPEN_RPL]) { + return t3c_tid->client->handlers[CPL_ACT_OPEN_RPL] (dev, skb, + t3c_tid-> + ctx); + } else { + printk(KERN_ERR "%s: received clientless CPL command 0x%x\n", + dev->name, CPL_ACT_OPEN_RPL); + return CPL_RET_BUF_DONE | CPL_RET_BAD_MSG; + } +} + +static int do_stid_rpl(struct t3cdev *dev, struct sk_buff *skb) +{ + union opcode_tid *p = cplhdr(skb); + unsigned int stid = G_TID(ntohl(p->opcode_tid)); + struct t3c_tid_entry *t3c_tid; + + t3c_tid = lookup_stid(&(T3C_DATA(dev))->tid_maps, stid); + if (t3c_tid->ctx && t3c_tid->client->handlers && + t3c_tid->client->handlers[p->opcode]) { + return t3c_tid->client->handlers[p->opcode] (dev, skb, + t3c_tid->ctx); + } else { + printk(KERN_ERR "%s: received clientless CPL command 0x%x\n", + dev->name, p->opcode); + return CPL_RET_BUF_DONE | CPL_RET_BAD_MSG; + } +} + +static int do_hwtid_rpl(struct t3cdev *dev, struct sk_buff *skb) +{ + union opcode_tid *p = cplhdr(skb); + unsigned int hwtid = G_TID(ntohl(p->opcode_tid)); + struct t3c_tid_entry *t3c_tid; + + t3c_tid = lookup_tid(&(T3C_DATA(dev))->tid_maps, hwtid); + if (t3c_tid->ctx && t3c_tid->client->handlers && + t3c_tid->client->handlers[p->opcode]) { + return t3c_tid->client->handlers[p->opcode] + (dev, skb, t3c_tid->ctx); + } else { + printk(KERN_ERR "%s: received clientless CPL command 0x%x\n", + dev->name, p->opcode); + return CPL_RET_BUF_DONE | CPL_RET_BAD_MSG; + } +} + +static int do_cr(struct t3cdev *dev, struct sk_buff *skb) +{ + struct cpl_pass_accept_req *req = cplhdr(skb); + unsigned int stid = G_PASS_OPEN_TID(ntohl(req->tos_tid)); + struct t3c_tid_entry *t3c_tid; + + t3c_tid = lookup_stid(&(T3C_DATA(dev))->tid_maps, stid); + if (t3c_tid->ctx && t3c_tid->client->handlers && + t3c_tid->client->handlers[CPL_PASS_ACCEPT_REQ]) { + return t3c_tid->client->handlers[CPL_PASS_ACCEPT_REQ] + (dev, skb, t3c_tid->ctx); + } else { + printk(KERN_ERR "%s: received clientless CPL command 0x%x\n", + dev->name, CPL_PASS_ACCEPT_REQ); + return CPL_RET_BUF_DONE | CPL_RET_BAD_MSG; + } +} + +static int do_abort_req_rss(struct t3cdev *dev, struct sk_buff *skb) +{ + union opcode_tid *p = cplhdr(skb); + unsigned int hwtid = G_TID(ntohl(p->opcode_tid)); + struct t3c_tid_entry *t3c_tid; + + t3c_tid = lookup_tid(&(T3C_DATA(dev))->tid_maps, hwtid); + if (t3c_tid->ctx && t3c_tid->client->handlers && + t3c_tid->client->handlers[p->opcode]) { + return t3c_tid->client->handlers[p->opcode] + (dev, skb, t3c_tid->ctx); + } else { + struct cpl_abort_req_rss *req = cplhdr(skb); + struct cpl_abort_rpl *rpl; + + struct sk_buff *skb = + alloc_skb(sizeof(struct cpl_abort_rpl), GFP_ATOMIC); + if (!skb) { + printk("do_abort_req_rss: couldn't get skb!\n"); + goto out; + } + skb->priority = CPL_PRIORITY_DATA; + __skb_put(skb, sizeof(struct cpl_abort_rpl)); + rpl = cplhdr(skb); + rpl->wr.wr_hi = + htonl(V_WR_OP(FW_WROPCODE_OFLD_HOST_ABORT_CON_RPL)); + rpl->wr.wr_lo = htonl(V_WR_TID(GET_TID(req))); + OPCODE_TID(rpl) = + htonl(MK_OPCODE_TID(CPL_ABORT_RPL, GET_TID(req))); + rpl->cmd = req->status; + cxgb3_ofld_send(dev, skb); +out: + return CPL_RET_BUF_DONE; + } +} + +static int do_act_establish(struct t3cdev *dev, struct sk_buff *skb) +{ + struct cpl_act_establish *req = cplhdr(skb); + unsigned int atid = G_PASS_OPEN_TID(ntohl(req->tos_tid)); + struct t3c_tid_entry *t3c_tid; + + t3c_tid = lookup_atid(&(T3C_DATA(dev))->tid_maps, atid); + if (t3c_tid->ctx && t3c_tid->client->handlers && + t3c_tid->client->handlers[CPL_ACT_ESTABLISH]) { + return t3c_tid->client->handlers[CPL_ACT_ESTABLISH] + (dev, skb, t3c_tid->ctx); + } else { + printk(KERN_ERR "%s: received clientless CPL command 0x%x\n", + dev->name, CPL_PASS_ACCEPT_REQ); + return CPL_RET_BUF_DONE | CPL_RET_BAD_MSG; + } +} + +static int do_set_tcb_rpl(struct t3cdev *dev, struct sk_buff *skb) +{ + struct cpl_set_tcb_rpl *rpl = cplhdr(skb); + + if (rpl->status != CPL_ERR_NONE) + printk(KERN_ERR + "Unexpected SET_TCB_RPL status %u for tid %u\n", + rpl->status, GET_TID(rpl)); + return CPL_RET_BUF_DONE; +} + +static int do_trace(struct t3cdev *dev, struct sk_buff *skb) +{ + struct cpl_trace_pkt *p = cplhdr(skb); + + skb->protocol = 0xffff; + skb->dev = dev->lldev; + skb_pull(skb, sizeof(*p)); + skb->mac.raw = skb->data; + netif_receive_skb(skb); + return 0; +} + +static int do_term(struct t3cdev *dev, struct sk_buff *skb) +{ + unsigned int hwtid = ntohl(skb->priority) >> 8 & 0xfffff; + unsigned int opcode = G_OPCODE(ntohl(skb->csum)); + struct t3c_tid_entry *t3c_tid; + + t3c_tid = lookup_tid(&(T3C_DATA(dev))->tid_maps, hwtid); + if (t3c_tid->ctx && t3c_tid->client->handlers && + t3c_tid->client->handlers[opcode]) { + return t3c_tid->client->handlers[opcode] (dev, skb, + t3c_tid->ctx); + } else { + printk(KERN_ERR "%s: received clientless CPL command 0x%x\n", + dev->name, opcode); + return CPL_RET_BUF_DONE | CPL_RET_BAD_MSG; + } +} + +static int nb_callback(struct notifier_block *self, unsigned long event, + void *ctx) +{ + switch (event) { + case (NETEVENT_NEIGH_UPDATE):{ + cxgb_neigh_update((struct neighbour *)ctx); + break; + } + case (NETEVENT_PMTU_UPDATE): + break; + case (NETEVENT_REDIRECT):{ + struct netevent_redirect *nr = ctx; + cxgb_redirect(nr->old, nr->new); + cxgb_neigh_update(nr->new->neighbour); + break; + } + default: + break; + } + return 0; +} + +static struct notifier_block nb = { + .notifier_call = nb_callback +}; + +/* + * Process a received packet with an unknown/unexpected CPL opcode. + */ +static int do_bad_cpl(struct t3cdev *dev, struct sk_buff *skb) +{ + printk(KERN_ERR "%s: received bad CPL command 0x%x\n", dev->name, + *skb->data); + return CPL_RET_BUF_DONE | CPL_RET_BAD_MSG; +} + +/* + * Handlers for each CPL opcode + */ +static cpl_handler_func cpl_handlers[NUM_CPL_CMDS]; + +/* + * Add a new handler to the CPL dispatch table. A NULL handler may be supplied + * to unregister an existing handler. + */ +void t3_register_cpl_handler(unsigned int opcode, cpl_handler_func h) +{ + if (opcode < NUM_CPL_CMDS) + cpl_handlers[opcode] = h ? h : do_bad_cpl; + else + printk(KERN_ERR "T3C: handler registration for " + "opcode %x failed\n", opcode); +} + +EXPORT_SYMBOL(t3_register_cpl_handler); + +/* + * T3CDEV's receive method. + */ +int process_rx(struct t3cdev *dev, struct sk_buff **skbs, int n) +{ + while (n--) { + struct sk_buff *skb = *skbs++; + unsigned int opcode = G_OPCODE(ntohl(skb->csum)); + int ret = cpl_handlers[opcode] (dev, skb); + +#if VALIDATE_TID + if (ret & CPL_RET_UNKNOWN_TID) { + union opcode_tid *p = cplhdr(skb); + + printk(KERN_ERR "%s: CPL message (opcode %u) had " + "unknown TID %u\n", dev->name, opcode, + G_TID(ntohl(p->opcode_tid))); + } +#endif + if (ret & CPL_RET_BUF_DONE) + kfree_skb(skb); + } + return 0; +} + +/* + * Sends an sk_buff to a T3C driver after dealing with any active network taps. + */ +int cxgb3_ofld_send(struct t3cdev *dev, struct sk_buff *skb) +{ + int r; + + local_bh_disable(); + r = dev->send(dev, skb); + local_bh_enable(); + return r; +} + +EXPORT_SYMBOL(cxgb3_ofld_send); + +static int is_offloading(struct net_device *dev) +{ + struct adapter *adapter; + int i; + + read_lock_bh(&adapter_list_lock); + list_for_each_entry(adapter, &adapter_list, adapter_list) { + for_each_port(adapter, i) { + if (dev == adapter->port[i]) { + read_unlock_bh(&adapter_list_lock); + return 1; + } + } + } + read_unlock_bh(&adapter_list_lock); + return 0; +} + +void cxgb_neigh_update(struct neighbour *neigh) +{ + struct net_device *dev = neigh->dev; + + if (dev && (is_offloading(dev))) { + struct t3cdev *tdev = T3CDEV(dev); + + BUG_ON(!tdev); + t3_l2t_update(tdev, neigh); + } +} + +static void set_l2t_ix(struct t3cdev *tdev, u32 tid, struct l2t_entry *e) +{ + struct sk_buff *skb; + struct cpl_set_tcb_field *req; + + skb = alloc_skb(sizeof(*req), GFP_ATOMIC); + if (!skb) { + printk(KERN_ERR "%s: cannot allocate skb!\n", __FUNCTION__); + return; + } + skb->priority = CPL_PRIORITY_CONTROL; + req = (struct cpl_set_tcb_field *)skb_put(skb, sizeof(*req)); + req->wr.wr_hi = htonl(V_WR_OP(FW_WROPCODE_FORWARD)); + OPCODE_TID(req) = htonl(MK_OPCODE_TID(CPL_SET_TCB_FIELD, tid)); + req->reply = 0; + req->cpu_idx = 0; + req->word = htons(W_TCB_L2T_IX); + req->mask = cpu_to_be64(V_TCB_L2T_IX(M_TCB_L2T_IX)); + req->val = cpu_to_be64(V_TCB_L2T_IX(e->idx)); + tdev->send(tdev, skb); +} + +void cxgb_redirect(struct dst_entry *old, struct dst_entry *new) +{ + struct net_device *olddev, *newdev; + struct tid_info *ti; + struct t3cdev *tdev; + u32 tid; + int update_tcb; + struct l2t_entry *e; + struct t3c_tid_entry *te; + + olddev = old->neighbour->dev; + newdev = new->neighbour->dev; + if (!is_offloading(olddev)) + return; + if (!is_offloading(newdev)) { + printk(KERN_WARNING "%s: Redirect to non-offload" + "device ignored.\n", __FUNCTION__); + return; + } + tdev = T3CDEV(olddev); + BUG_ON(!tdev); + if (tdev != T3CDEV(newdev)) { + printk(KERN_WARNING "%s: Redirect to different " + "offload device ignored.\n", __FUNCTION__); + return; + } + + /* Add new L2T entry */ + e = t3_l2t_get(tdev, new->neighbour, newdev); + if (!e) { + printk(KERN_ERR "%s: couldn't allocate new l2t entry!\n", + __FUNCTION__); + return; + } + + /* Walk tid table and notify clients of dst change. */ + ti = &(T3C_DATA(tdev))->tid_maps; + for (tid = 0; tid < ti->ntids; tid++) { + te = lookup_tid(ti, tid); + BUG_ON(!te); + if (te->ctx && te->client && te->client->redirect) { + update_tcb = te->client->redirect(te->ctx, old, new, e); + if (update_tcb) { + l2t_hold(L2DATA(tdev), e); + set_l2t_ix(tdev, tid, e); + } + } + } + l2t_release(L2DATA(tdev), e); +} + +/* + * Allocate a chunk of memory using kmalloc or, if that fails, vmalloc. + * The allocated memory is cleared. + */ +void *cxgb_alloc_mem(unsigned long size) +{ + void *p = kmalloc(size, GFP_KERNEL); + + if (!p) + p = vmalloc(size); + if (p) + memset(p, 0, size); + return p; +} + +/* + * Free memory allocated through t3_alloc_mem(). + */ +void cxgb_free_mem(void *addr) +{ + unsigned long p = (unsigned long)addr; + + if (p >= VMALLOC_START && p < VMALLOC_END) + vfree(addr); + else + kfree(addr); +} + +/* + * Allocate and initialize the TID tables. Returns 0 on success. + */ +static int init_tid_tabs(struct tid_info *t, unsigned int ntids, + unsigned int natids, unsigned int nstids, + unsigned int atid_base, unsigned int stid_base) +{ + unsigned long size = ntids * sizeof(*t->tid_tab) + + natids * sizeof(*t->atid_tab) + nstids * sizeof(*t->stid_tab); + + t->tid_tab = cxgb_alloc_mem(size); + if (!t->tid_tab) + return -ENOMEM; + + t->stid_tab = (union listen_entry *)&t->tid_tab[ntids]; + t->atid_tab = (union active_open_entry *)&t->stid_tab[nstids]; + t->ntids = ntids; + t->nstids = nstids; + t->stid_base = stid_base; + t->sfree = NULL; + t->natids = natids; + t->atid_base = atid_base; + t->afree = NULL; + t->stids_in_use = t->atids_in_use = 0; + atomic_set(&t->tids_in_use, 0); + spin_lock_init(&t->stid_lock); + spin_lock_init(&t->atid_lock); + + /* + * Setup the free lists for stid_tab and atid_tab. + */ + if (nstids) { + while (--nstids) + t->stid_tab[nstids - 1].next = &t->stid_tab[nstids]; + t->sfree = t->stid_tab; + } + if (natids) { + while (--natids) + t->atid_tab[natids - 1].next = &t->atid_tab[natids]; + t->afree = t->atid_tab; + } + return 0; +} + +static void free_tid_maps(struct tid_info *t) +{ + cxgb_free_mem(t->tid_tab); +} + +static inline void add_adapter(struct adapter *adap) +{ + write_lock_bh(&adapter_list_lock); + list_add_tail(&adap->adapter_list, &adapter_list); + write_unlock_bh(&adapter_list_lock); +} + +static inline void remove_adapter(struct adapter *adap) +{ + write_lock_bh(&adapter_list_lock); + list_del(&adap->adapter_list); + write_unlock_bh(&adapter_list_lock); +} + +int cxgb3_offload_activate(struct adapter *adapter) +{ + struct t3cdev *dev = &adapter->tdev; + int natids, err; + struct t3c_data *t; + struct tid_range stid_range, tid_range; + struct mtutab mtutab; + unsigned int l2t_capacity; + + t = kcalloc(1, sizeof(*t), GFP_KERNEL); + if (!t) + return -ENOMEM; + + err = -EOPNOTSUPP; + if (dev->ctl(dev, GET_TX_MAX_CHUNK, &t->tx_max_chunk) < 0 || + dev->ctl(dev, GET_MAX_OUTSTANDING_WR, &t->max_wrs) < 0 || + dev->ctl(dev, GET_L2T_CAPACITY, &l2t_capacity) < 0 || + dev->ctl(dev, GET_MTUS, &mtutab) < 0 || + dev->ctl(dev, GET_TID_RANGE, &tid_range) < 0 || + dev->ctl(dev, GET_STID_RANGE, &stid_range) < 0) + goto out_free; + + err = -ENOMEM; + L2DATA(dev) = t3_init_l2t(l2t_capacity); + if (!L2DATA(dev)) + goto out_free; + + natids = min(tid_range.num / 2, MAX_ATIDS); + err = init_tid_tabs(&t->tid_maps, tid_range.num, natids, + stid_range.num, ATID_BASE, stid_range.base); + if (err) + goto out_free_l2t; + + t->mtus = mtutab.mtus; + t->nmtus = mtutab.size; + + INIT_WORK(&t->tid_release_task, t3_process_tid_release_list); + spin_lock_init(&t->tid_release_lock); + INIT_LIST_HEAD(&t->list_node); + t->dev = dev; + + T3C_DATA(dev) = t; + dev->recv = process_rx; + dev->neigh_update = t3_l2t_update; + + /* Register netevent handler once */ + if (list_empty(&adapter_list)) + register_netevent_notifier(&nb); + + add_adapter(adapter); + return 0; + +out_free_l2t: + t3_free_l2t(L2DATA(dev)); + L2DATA(dev) = NULL; +out_free: + kfree(t); + return err; +} + +void cxgb3_offload_deactivate(struct adapter *adapter) +{ + struct t3cdev *tdev = &adapter->tdev; + struct t3c_data *t = T3C_DATA(tdev); + + remove_adapter(adapter); + if (list_empty(&adapter_list)) + unregister_netevent_notifier(&nb); + + free_tid_maps(&t->tid_maps); + T3C_DATA(tdev) = NULL; + t3_free_l2t(L2DATA(tdev)); + L2DATA(tdev) = NULL; + kfree(t); +} + +static inline void register_tdev(struct t3cdev *tdev) +{ + static int unit; + + mutex_lock(&cxgb3_db_lock); + snprintf(tdev->name, sizeof(tdev->name), "ofld_dev%d", unit++); + list_add_tail(&tdev->ofld_dev_list, &ofld_dev_list); + mutex_unlock(&cxgb3_db_lock); +} + +static inline void unregister_tdev(struct t3cdev *tdev) +{ + mutex_lock(&cxgb3_db_lock); + list_del(&tdev->ofld_dev_list); + mutex_unlock(&cxgb3_db_lock); +} + +void __devinit cxgb3_adapter_ofld(struct adapter *adapter) +{ + struct t3cdev *tdev = &adapter->tdev; + + INIT_LIST_HEAD(&tdev->ofld_dev_list); + + cxgb3_set_dummy_ops(tdev); + tdev->send = t3_offload_tx; + tdev->ctl = cxgb_offload_ctl; + tdev->type = adapter->params.rev == 0 ? T3A : T3B; + + register_tdev(tdev); +} + +void __devexit cxgb3_adapter_unofld(struct adapter *adapter) +{ + struct t3cdev *tdev = &adapter->tdev; + + tdev->recv = NULL; + tdev->neigh_update = NULL; + + unregister_tdev(tdev); +} + +void __init cxgb3_offload_init(void) +{ + int i; + + for (i = 0; i < NUM_CPL_CMDS; ++i) + cpl_handlers[i] = do_bad_cpl; + + t3_register_cpl_handler(CPL_SMT_WRITE_RPL, do_smt_write_rpl); + t3_register_cpl_handler(CPL_L2T_WRITE_RPL, do_l2t_write_rpl); + t3_register_cpl_handler(CPL_PASS_OPEN_RPL, do_stid_rpl); + t3_register_cpl_handler(CPL_CLOSE_LISTSRV_RPL, do_stid_rpl); + t3_register_cpl_handler(CPL_PASS_ACCEPT_REQ, do_cr); + t3_register_cpl_handler(CPL_PASS_ESTABLISH, do_hwtid_rpl); + t3_register_cpl_handler(CPL_ABORT_RPL_RSS, do_hwtid_rpl); + t3_register_cpl_handler(CPL_ABORT_RPL, do_hwtid_rpl); + t3_register_cpl_handler(CPL_RX_URG_NOTIFY, do_hwtid_rpl); + t3_register_cpl_handler(CPL_RX_DATA, do_hwtid_rpl); + t3_register_cpl_handler(CPL_TX_DATA_ACK, do_hwtid_rpl); + t3_register_cpl_handler(CPL_TX_DMA_ACK, do_hwtid_rpl); + t3_register_cpl_handler(CPL_ACT_OPEN_RPL, do_act_open_rpl); + t3_register_cpl_handler(CPL_PEER_CLOSE, do_hwtid_rpl); + t3_register_cpl_handler(CPL_CLOSE_CON_RPL, do_hwtid_rpl); + t3_register_cpl_handler(CPL_ABORT_REQ_RSS, do_abort_req_rss); + t3_register_cpl_handler(CPL_ACT_ESTABLISH, do_act_establish); + t3_register_cpl_handler(CPL_SET_TCB_RPL, do_set_tcb_rpl); + t3_register_cpl_handler(CPL_RDMA_TERMINATE, do_term); + t3_register_cpl_handler(CPL_RDMA_EC_STATUS, do_hwtid_rpl); + t3_register_cpl_handler(CPL_TRACE_PKT, do_trace); + t3_register_cpl_handler(CPL_RX_DATA_DDP, do_hwtid_rpl); + t3_register_cpl_handler(CPL_RX_DDP_COMPLETE, do_hwtid_rpl); + t3_register_cpl_handler(CPL_ISCSI_HDR, do_hwtid_rpl); +} diff --git a/drivers/net/cxgb3/cxgb3_offload.h b/drivers/net/cxgb3/cxgb3_offload.h new file mode 100644 index 00000000000..7b7798384ae --- /dev/null +++ b/drivers/net/cxgb3/cxgb3_offload.h @@ -0,0 +1,193 @@ +/* + * Copyright (c) 2006 Chelsio, Inc. All rights reserved. + * Copyright (c) 2006 Open Grid Computing, Inc. All rights reserved. + * + * This software is available to you under a choice of one of two + * licenses. You may choose to be licensed under the terms of the GNU + * General Public License (GPL) Version 2, available from the file + * COPYING in the main directory of this source tree, or the + * OpenIB.org BSD license below: + * + * Redistribution and use in source and binary forms, with or + * without modification, are permitted provided that the following + * conditions are met: + * + * - Redistributions of source code must retain the above + * copyright notice, this list of conditions and the following + * disclaimer. + * + * - Redistributions in binary form must reproduce the above + * copyright notice, this list of conditions and the following + * disclaimer in the documentation and/or other materials + * provided with the distribution. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + */ +#ifndef _CXGB3_OFFLOAD_H +#define _CXGB3_OFFLOAD_H + +#include <linux/list.h> +#include <linux/skbuff.h> + +#include "l2t.h" + +#include "t3cdev.h" +#include "t3_cpl.h" + +struct adapter; + +void cxgb3_offload_init(void); + +void cxgb3_adapter_ofld(struct adapter *adapter); +void cxgb3_adapter_unofld(struct adapter *adapter); +int cxgb3_offload_activate(struct adapter *adapter); +void cxgb3_offload_deactivate(struct adapter *adapter); + +void cxgb3_set_dummy_ops(struct t3cdev *dev); + +/* + * Client registration. Users of T3 driver must register themselves. + * The T3 driver will call the add function of every client for each T3 + * adapter activated, passing up the t3cdev ptr. Each client fills out an + * array of callback functions to process CPL messages. + */ + +void cxgb3_register_client(struct cxgb3_client *client); +void cxgb3_unregister_client(struct cxgb3_client *client); +void cxgb3_add_clients(struct t3cdev *tdev); +void cxgb3_remove_clients(struct t3cdev *tdev); + +typedef int (*cxgb3_cpl_handler_func)(struct t3cdev *dev, + struct sk_buff *skb, void *ctx); + +struct cxgb3_client { + char *name; + void (*add) (struct t3cdev *); + void (*remove) (struct t3cdev *); + cxgb3_cpl_handler_func *handlers; + int (*redirect)(void *ctx, struct dst_entry *old, + struct dst_entry *new, struct l2t_entry *l2t); + struct list_head client_list; +}; + +/* + * TID allocation services. + */ +int cxgb3_alloc_atid(struct t3cdev *dev, struct cxgb3_client *client, + void *ctx); +int cxgb3_alloc_stid(struct t3cdev *dev, struct cxgb3_client *client, + void *ctx); +void *cxgb3_free_atid(struct t3cdev *dev, int atid); +void cxgb3_free_stid(struct t3cdev *dev, int stid); +void cxgb3_insert_tid(struct t3cdev *dev, struct cxgb3_client *client, + void *ctx, unsigned int tid); +void cxgb3_queue_tid_release(struct t3cdev *dev, unsigned int tid); +void cxgb3_remove_tid(struct t3cdev *dev, void *ctx, unsigned int tid); + +struct t3c_tid_entry { + struct cxgb3_client *client; + void *ctx; +}; + +/* CPL message priority levels */ +enum { + CPL_PRIORITY_DATA = 0, /* data messages */ + CPL_PRIORITY_SETUP = 1, /* connection setup messages */ + CPL_PRIORITY_TEARDOWN = 0, /* connection teardown messages */ + CPL_PRIORITY_LISTEN = 1, /* listen start/stop messages */ + CPL_PRIORITY_ACK = 1, /* RX ACK messages */ + CPL_PRIORITY_CONTROL = 1 /* offload control messages */ +}; + +/* Flags for return value of CPL message handlers */ +enum { + CPL_RET_BUF_DONE = 1, /* buffer processing done, buffer may be freed */ + CPL_RET_BAD_MSG = 2, /* bad CPL message (e.g., unknown opcode) */ + CPL_RET_UNKNOWN_TID = 4 /* unexpected unknown TID */ +}; + +typedef int (*cpl_handler_func)(struct t3cdev *dev, struct sk_buff *skb); + +/* + * Returns a pointer to the first byte of the CPL header in an sk_buff that + * contains a CPL message. + */ +static inline void *cplhdr(struct sk_buff *skb) +{ + return skb->data; +} + +void t3_register_cpl_handler(unsigned int opcode, cpl_handler_func h); + +union listen_entry { + struct t3c_tid_entry t3c_tid; + union listen_entry *next; +}; + +union active_open_entry { + struct t3c_tid_entry t3c_tid; + union active_open_entry *next; +}; + +/* + * Holds the size, base address, free list start, etc of the TID, server TID, + * and active-open TID tables for a offload device. + * The tables themselves are allocated dynamically. + */ +struct tid_info { + struct t3c_tid_entry *tid_tab; + unsigned int ntids; + atomic_t tids_in_use; + + union listen_entry *stid_tab; + unsigned int nstids; + unsigned int stid_base; + + union active_open_entry *atid_tab; + unsigned int natids; + unsigned int atid_base; + + /* + * The following members are accessed R/W so we put them in their own + * cache lines. + * + * XXX We could combine the atid fields above with the lock here since + * atids are use once (unlike other tids). OTOH the above fields are + * usually in cache due to tid_tab. + */ + spinlock_t atid_lock ____cacheline_aligned_in_smp; + union active_open_entry *afree; + unsigned int atids_in_use; + + spinlock_t stid_lock ____cacheline_aligned; + union listen_entry *sfree; + unsigned int stids_in_use; +}; + +struct t3c_data { + struct list_head list_node; + struct t3cdev *dev; + unsigned int tx_max_chunk; /* max payload for TX_DATA */ + unsigned int max_wrs; /* max in-flight WRs per connection */ + unsigned int nmtus; + const unsigned short *mtus; + struct tid_info tid_maps; + + struct t3c_tid_entry *tid_release_list; + spinlock_t tid_release_lock; + struct work_struct tid_release_task; +}; + +/* + * t3cdev -> t3c_data accessor + */ +#define T3C_DATA(dev) (*(struct t3c_data **)&(dev)->l4opt) + +#endif diff --git a/drivers/net/cxgb3/firmware_exports.h b/drivers/net/cxgb3/firmware_exports.h new file mode 100644 index 00000000000..3565f481801 --- /dev/null +++ b/drivers/net/cxgb3/firmware_exports.h @@ -0,0 +1,144 @@ +/* + * ---------------------------------------------------------------------------- + * >>>>>>>>>>>>>>>>>>>>>>>>>>>>> COPYRIGHT NOTICE <<<<<<<<<<<<<<<<<<<<<<<<<<<<< + * ---------------------------------------------------------------------------- + * Copyright 2004 (C) Chelsio Communications, Inc. (Chelsio) + * + * Chelsio Communications, Inc. owns the sole copyright to this software. + * You may not make a copy, you may not derive works herefrom, and you may + * not distribute this work to others. Other restrictions of rights may apply + * as well. This is unpublished, confidential information. All rights reserved. + * This software contains confidential information and trade secrets of Chelsio + * Communications, Inc. Use, disclosure, or reproduction is prohibited without + * the prior express written permission of Chelsio Communications, Inc. + * ---------------------------------------------------------------------------- + * >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Warranty <<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<< + * ---------------------------------------------------------------------------- + * CHELSIO MAKES NO WARRANTY OF ANY KIND WITH REGARD TO THE USE OF THIS + * SOFTWARE, EITHER EXPRESSED OR IMPLIED, INCLUDING BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. + * ---------------------------------------------------------------------------- + * + * This is the firmware_exports.h header file, firmware interface defines. + * + * Written January 2005 by felix marti (felix@chelsio.com) + */ +#ifndef _FIRMWARE_EXPORTS_H_ +#define _FIRMWARE_EXPORTS_H_ + +/* WR OPCODES supported by the firmware. + */ +#define FW_WROPCODE_FORWARD 0x01 +#define FW_WROPCODE_BYPASS 0x05 + +#define FW_WROPCODE_TUNNEL_TX_PKT 0x03 + +#define FW_WROPOCDE_ULPTX_DATA_SGL 0x00 +#define FW_WROPCODE_ULPTX_MEM_READ 0x02 +#define FW_WROPCODE_ULPTX_PKT 0x04 +#define FW_WROPCODE_ULPTX_INVALIDATE 0x06 + +#define FW_WROPCODE_TUNNEL_RX_PKT 0x07 + +#define FW_WROPCODE_OFLD_GETTCB_RPL 0x08 +#define FW_WROPCODE_OFLD_CLOSE_CON 0x09 +#define FW_WROPCODE_OFLD_TP_ABORT_CON_REQ 0x0A +#define FW_WROPCODE_OFLD_HOST_ABORT_CON_RPL 0x0F +#define FW_WROPCODE_OFLD_HOST_ABORT_CON_REQ 0x0B +#define FW_WROPCODE_OFLD_TP_ABORT_CON_RPL 0x0C +#define FW_WROPCODE_OFLD_TX_DATA 0x0D +#define FW_WROPCODE_OFLD_TX_DATA_ACK 0x0E + +#define FW_WROPCODE_RI_RDMA_INIT 0x10 +#define FW_WROPCODE_RI_RDMA_WRITE 0x11 +#define FW_WROPCODE_RI_RDMA_READ_REQ 0x12 +#define FW_WROPCODE_RI_RDMA_READ_RESP 0x13 +#define FW_WROPCODE_RI_SEND 0x14 +#define FW_WROPCODE_RI_TERMINATE 0x15 +#define FW_WROPCODE_RI_RDMA_READ 0x16 +#define FW_WROPCODE_RI_RECEIVE 0x17 +#define FW_WROPCODE_RI_BIND_MW 0x18 +#define FW_WROPCODE_RI_FASTREGISTER_MR 0x19 +#define FW_WROPCODE_RI_LOCAL_INV 0x1A +#define FW_WROPCODE_RI_MODIFY_QP 0x1B +#define FW_WROPCODE_RI_BYPASS 0x1C + +#define FW_WROPOCDE_RSVD 0x1E + +#define FW_WROPCODE_SGE_EGRESSCONTEXT_RR 0x1F + +#define FW_WROPCODE_MNGT 0x1D +#define FW_MNGTOPCODE_PKTSCHED_SET 0x00 + +/* Maximum size of a WR sent from the host, limited by the SGE. + * + * Note: WR coming from ULP or TP are only limited by CIM. + */ +#define FW_WR_SIZE 128 + +/* Maximum number of outstanding WRs sent from the host. Value must be + * programmed in the CTRL/TUNNEL/QP SGE Egress Context and used by + * offload modules to limit the number of WRs per connection. + */ +#define FW_T3_WR_NUM 16 +#define FW_N3_WR_NUM 7 + +#ifndef N3 +# define FW_WR_NUM FW_T3_WR_NUM +#else +# define FW_WR_NUM FW_N3_WR_NUM +#endif + +/* FW_TUNNEL_NUM corresponds to the number of supported TUNNEL Queues. These + * queues must start at SGE Egress Context FW_TUNNEL_SGEEC_START and must + * start at 'TID' (or 'uP Token') FW_TUNNEL_TID_START. + * + * Ingress Traffic (e.g. DMA completion credit) for TUNNEL Queue[i] is sent + * to RESP Queue[i]. + */ +#define FW_TUNNEL_NUM 8 +#define FW_TUNNEL_SGEEC_START 8 +#define FW_TUNNEL_TID_START 65544 + +/* FW_CTRL_NUM corresponds to the number of supported CTRL Queues. These queues + * must start at SGE Egress Context FW_CTRL_SGEEC_START and must start at 'TID' + * (or 'uP Token') FW_CTRL_TID_START. + * + * Ingress Traffic for CTRL Queue[i] is sent to RESP Queue[i]. + */ +#define FW_CTRL_NUM 8 +#define FW_CTRL_SGEEC_START 65528 +#define FW_CTRL_TID_START 65536 + +/* FW_OFLD_NUM corresponds to the number of supported OFFLOAD Queues. These + * queues must start at SGE Egress Context FW_OFLD_SGEEC_START. + * + * Note: the 'uP Token' in the SGE Egress Context fields is irrelevant for + * OFFLOAD Queues, as the host is responsible for providing the correct TID in + * every WR. + * + * Ingress Trafffic for OFFLOAD Queue[i] is sent to RESP Queue[i]. + */ +#define FW_OFLD_NUM 8 +#define FW_OFLD_SGEEC_START 0 + +/* + * + */ +#define FW_RI_NUM 1 +#define FW_RI_SGEEC_START 65527 +#define FW_RI_TID_START 65552 + +/* + * The RX_PKT_TID + */ +#define FW_RX_PKT_NUM 1 +#define FW_RX_PKT_TID_START 65553 + +/* FW_WRC_NUM corresponds to the number of Work Request Context that supported + * by the firmware. + */ +#define FW_WRC_NUM \ + (65536 + FW_TUNNEL_NUM + FW_CTRL_NUM + FW_RI_NUM + FW_RX_PKT_NUM) + +#endif /* _FIRMWARE_EXPORTS_H_ */ diff --git a/drivers/net/cxgb3/l2t.c b/drivers/net/cxgb3/l2t.c new file mode 100644 index 00000000000..9997138a4fd --- /dev/null +++ b/drivers/net/cxgb3/l2t.c @@ -0,0 +1,450 @@ +/* + * Copyright (c) 2006 Chelsio, Inc. All rights reserved. + * Copyright (c) 2006 Open Grid Computing, Inc. All rights reserved. + * + * This software is available to you under a choice of one of two + * licenses. You may choose to be licensed under the terms of the GNU + * General Public License (GPL) Version 2, available from the file + * COPYING in the main directory of this source tree, or the + * OpenIB.org BSD license below: + * + * Redistribution and use in source and binary forms, with or + * without modification, are permitted provided that the following + * conditions are met: + * + * - Redistributions of source code must retain the above + * copyright notice, this list of conditions and the following + * disclaimer. + * + * - Redistributions in binary form must reproduce the above + * copyright notice, this list of conditions and the following + * disclaimer in the documentation and/or other materials + * provided with the distribution. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + */ +#include <linux/skbuff.h> +#include <linux/netdevice.h> +#include <linux/if.h> +#include <linux/if_vlan.h> +#include <linux/jhash.h> +#include <net/neighbour.h> +#include "common.h" +#include "t3cdev.h" +#include "cxgb3_defs.h" +#include "l2t.h" +#include "t3_cpl.h" +#include "firmware_exports.h" + +#define VLAN_NONE 0xfff + +/* + * Module locking notes: There is a RW lock protecting the L2 table as a + * whole plus a spinlock per L2T entry. Entry lookups and allocations happen + * under the protection of the table lock, individual entry changes happen + * while holding that entry's spinlock. The table lock nests outside the + * entry locks. Allocations of new entries take the table lock as writers so + * no other lookups can happen while allocating new entries. Entry updates + * take the table lock as readers so multiple entries can be updated in + * parallel. An L2T entry can be dropped by decrementing its reference count + * and therefore can happen in parallel with entry allocation but no entry + * can change state or increment its ref count during allocation as both of + * these perform lookups. + */ + +static inline unsigned int vlan_prio(const struct l2t_entry *e) +{ + return e->vlan >> 13; +} + +static inline unsigned int arp_hash(u32 key, int ifindex, + const struct l2t_data *d) +{ + return jhash_2words(key, ifindex, 0) & (d->nentries - 1); +} + +static inline void neigh_replace(struct l2t_entry *e, struct neighbour *n) +{ + neigh_hold(n); + if (e->neigh) + neigh_release(e->neigh); + e->neigh = n; +} + +/* + * Set up an L2T entry and send any packets waiting in the arp queue. The + * supplied skb is used for the CPL_L2T_WRITE_REQ. Must be called with the + * entry locked. + */ +static int setup_l2e_send_pending(struct t3cdev *dev, struct sk_buff *skb, + struct l2t_entry *e) +{ + struct cpl_l2t_write_req *req; + + if (!skb) { + skb = alloc_skb(sizeof(*req), GFP_ATOMIC); + if (!skb) + return -ENOMEM; + } + + req = (struct cpl_l2t_write_req *)__skb_put(skb, sizeof(*req)); + req->wr.wr_hi = htonl(V_WR_OP(FW_WROPCODE_FORWARD)); + OPCODE_TID(req) = htonl(MK_OPCODE_TID(CPL_L2T_WRITE_REQ, e->idx)); + req->params = htonl(V_L2T_W_IDX(e->idx) | V_L2T_W_IFF(e->smt_idx) | + V_L2T_W_VLAN(e->vlan & VLAN_VID_MASK) | + V_L2T_W_PRIO(vlan_prio(e))); + memcpy(e->dmac, e->neigh->ha, sizeof(e->dmac)); + memcpy(req->dst_mac, e->dmac, sizeof(req->dst_mac)); + skb->priority = CPL_PRIORITY_CONTROL; + cxgb3_ofld_send(dev, skb); + while (e->arpq_head) { + skb = e->arpq_head; + e->arpq_head = skb->next; + skb->next = NULL; + cxgb3_ofld_send(dev, skb); + } + e->arpq_tail = NULL; + e->state = L2T_STATE_VALID; + + return 0; +} + +/* + * Add a packet to the an L2T entry's queue of packets awaiting resolution. + * Must be called with the entry's lock held. + */ +static inline void arpq_enqueue(struct l2t_entry *e, struct sk_buff *skb) +{ + skb->next = NULL; + if (e->arpq_head) + e->arpq_tail->next = skb; + else + e->arpq_head = skb; + e->arpq_tail = skb; +} + +int t3_l2t_send_slow(struct t3cdev *dev, struct sk_buff *skb, + struct l2t_entry *e) +{ +again: + switch (e->state) { + case L2T_STATE_STALE: /* entry is stale, kick off revalidation */ + neigh_event_send(e->neigh, NULL); + spin_lock_bh(&e->lock); + if (e->state == L2T_STATE_STALE) + e->state = L2T_STATE_VALID; + spin_unlock_bh(&e->lock); + case L2T_STATE_VALID: /* fast-path, send the packet on */ + return cxgb3_ofld_send(dev, skb); + case L2T_STATE_RESOLVING: + spin_lock_bh(&e->lock); + if (e->state != L2T_STATE_RESOLVING) { + /* ARP already completed */ + spin_unlock_bh(&e->lock); + goto again; + } + arpq_enqueue(e, skb); + spin_unlock_bh(&e->lock); + + /* + * Only the first packet added to the arpq should kick off + * resolution. However, because the alloc_skb below can fail, + * we allow each packet added to the arpq to retry resolution + * as a way of recovering from transient memory exhaustion. + * A better way would be to use a work request to retry L2T + * entries when there's no memory. + */ + if (!neigh_event_send(e->neigh, NULL)) { + skb = alloc_skb(sizeof(struct cpl_l2t_write_req), + GFP_ATOMIC); + if (!skb) + break; + + spin_lock_bh(&e->lock); + if (e->arpq_head) + setup_l2e_send_pending(dev, skb, e); + else /* we lost the race */ + __kfree_skb(skb); + spin_unlock_bh(&e->lock); + } + } + return 0; +} + +EXPORT_SYMBOL(t3_l2t_send_slow); + +void t3_l2t_send_event(struct t3cdev *dev, struct l2t_entry *e) +{ +again: + switch (e->state) { + case L2T_STATE_STALE: /* entry is stale, kick off revalidation */ + neigh_event_send(e->neigh, NULL); + spin_lock_bh(&e->lock); + if (e->state == L2T_STATE_STALE) { + e->state = L2T_STATE_VALID; + } + spin_unlock_bh(&e->lock); + return; + case L2T_STATE_VALID: /* fast-path, send the packet on */ + return; + case L2T_STATE_RESOLVING: + spin_lock_bh(&e->lock); + if (e->state != L2T_STATE_RESOLVING) { + /* ARP already completed */ + spin_unlock_bh(&e->lock); + goto again; + } + spin_unlock_bh(&e->lock); + + /* + * Only the first packet added to the arpq should kick off + * resolution. However, because the alloc_skb below can fail, + * we allow each packet added to the arpq to retry resolution + * as a way of recovering from transient memory exhaustion. + * A better way would be to use a work request to retry L2T + * entries when there's no memory. + */ + neigh_event_send(e->neigh, NULL); + } + return; +} + +EXPORT_SYMBOL(t3_l2t_send_event); + +/* + * Allocate a free L2T entry. Must be called with l2t_data.lock held. + */ +static struct l2t_entry *alloc_l2e(struct l2t_data *d) +{ + struct l2t_entry *end, *e, **p; + + if (!atomic_read(&d->nfree)) + return NULL; + + /* there's definitely a free entry */ + for (e = d->rover, end = &d->l2tab[d->nentries]; e != end; ++e) + if (atomic_read(&e->refcnt) == 0) + goto found; + + for (e = &d->l2tab[1]; atomic_read(&e->refcnt); ++e) ; +found: + d->rover = e + 1; + atomic_dec(&d->nfree); + + /* + * The entry we found may be an inactive entry that is + * presently in the hash table. We need to remove it. + */ + if (e->state != L2T_STATE_UNUSED) { + int hash = arp_hash(e->addr, e->ifindex, d); + + for (p = &d->l2tab[hash].first; *p; p = &(*p)->next) + if (*p == e) { + *p = e->next; + break; + } + e->state = L2T_STATE_UNUSED; + } + return e; +} + +/* + * Called when an L2T entry has no more users. The entry is left in the hash + * table since it is likely to be reused but we also bump nfree to indicate + * that the entry can be reallocated for a different neighbor. We also drop + * the existing neighbor reference in case the neighbor is going away and is + * waiting on our reference. + * + * Because entries can be reallocated to other neighbors once their ref count + * drops to 0 we need to take the entry's lock to avoid races with a new + * incarnation. + */ +void t3_l2e_free(struct l2t_data *d, struct l2t_entry *e) +{ + spin_lock_bh(&e->lock); + if (atomic_read(&e->refcnt) == 0) { /* hasn't been recycled */ + if (e->neigh) { + neigh_release(e->neigh); + e->neigh = NULL; + } + } + spin_unlock_bh(&e->lock); + atomic_inc(&d->nfree); +} + +EXPORT_SYMBOL(t3_l2e_free); + +/* + * Update an L2T entry that was previously used for the same next hop as neigh. + * Must be called with softirqs disabled. + */ +static inline void reuse_entry(struct l2t_entry *e, struct neighbour *neigh) +{ + unsigned int nud_state; + + spin_lock(&e->lock); /* avoid race with t3_l2t_free */ + + if (neigh != e->neigh) + neigh_replace(e, neigh); + nud_state = neigh->nud_state; + if (memcmp(e->dmac, neigh->ha, sizeof(e->dmac)) || + !(nud_state & NUD_VALID)) + e->state = L2T_STATE_RESOLVING; + else if (nud_state & NUD_CONNECTED) + e->state = L2T_STATE_VALID; + else + e->state = L2T_STATE_STALE; + spin_unlock(&e->lock); +} + +struct l2t_entry *t3_l2t_get(struct t3cdev *cdev, struct neighbour *neigh, + struct net_device *dev) +{ + struct l2t_entry *e; + struct l2t_data *d = L2DATA(cdev); + u32 addr = *(u32 *) neigh->primary_key; + int ifidx = neigh->dev->ifindex; + int hash = arp_hash(addr, ifidx, d); + struct port_info *p = netdev_priv(dev); + int smt_idx = p->port_id; + + write_lock_bh(&d->lock); + for (e = d->l2tab[hash].first; e; e = e->next) + if (e->addr == addr && e->ifindex == ifidx && + e->smt_idx == smt_idx) { + l2t_hold(d, e); + if (atomic_read(&e->refcnt) == 1) + reuse_entry(e, neigh); + goto done; + } + + /* Need to allocate a new entry */ + e = alloc_l2e(d); + if (e) { + spin_lock(&e->lock); /* avoid race with t3_l2t_free */ + e->next = d->l2tab[hash].first; + d->l2tab[hash].first = e; + e->state = L2T_STATE_RESOLVING; + e->addr = addr; + e->ifindex = ifidx; + e->smt_idx = smt_idx; + atomic_set(&e->refcnt, 1); + neigh_replace(e, neigh); + if (neigh->dev->priv_flags & IFF_802_1Q_VLAN) + e->vlan = VLAN_DEV_INFO(neigh->dev)->vlan_id; + else + e->vlan = VLAN_NONE; + spin_unlock(&e->lock); + } +done: + write_unlock_bh(&d->lock); + return e; +} + +EXPORT_SYMBOL(t3_l2t_get); + +/* + * Called when address resolution fails for an L2T entry to handle packets + * on the arpq head. If a packet specifies a failure handler it is invoked, + * otherwise the packets is sent to the offload device. + * + * XXX: maybe we should abandon the latter behavior and just require a failure + * handler. + */ +static void handle_failed_resolution(struct t3cdev *dev, struct sk_buff *arpq) +{ + while (arpq) { + struct sk_buff *skb = arpq; + struct l2t_skb_cb *cb = L2T_SKB_CB(skb); + + arpq = skb->next; + skb->next = NULL; + if (cb->arp_failure_handler) + cb->arp_failure_handler(dev, skb); + else + cxgb3_ofld_send(dev, skb); + } +} + +/* + * Called when the host's ARP layer makes a change to some entry that is + * loaded into the HW L2 table. + */ +void t3_l2t_update(struct t3cdev *dev, struct neighbour *neigh) +{ + struct l2t_entry *e; + struct sk_buff *arpq = NULL; + struct l2t_data *d = L2DATA(dev); + u32 addr = *(u32 *) neigh->primary_key; + int ifidx = neigh->dev->ifindex; + int hash = arp_hash(addr, ifidx, d); + + read_lock_bh(&d->lock); + for (e = d->l2tab[hash].first; e; e = e->next) + if (e->addr == addr && e->ifindex == ifidx) { + spin_lock(&e->lock); + goto found; + } + read_unlock_bh(&d->lock); + return; + +found: + read_unlock(&d->lock); + if (atomic_read(&e->refcnt)) { + if (neigh != e->neigh) + neigh_replace(e, neigh); + + if (e->state == L2T_STATE_RESOLVING) { + if (neigh->nud_state & NUD_FAILED) { + arpq = e->arpq_head; + e->arpq_head = e->arpq_tail = NULL; + } else if (neigh_is_connected(neigh)) + setup_l2e_send_pending(dev, NULL, e); + } else { + e->state = neigh_is_connected(neigh) ? + L2T_STATE_VALID : L2T_STATE_STALE; + if (memcmp(e->dmac, neigh->ha, 6)) + setup_l2e_send_pending(dev, NULL, e); + } + } + spin_unlock_bh(&e->lock); + + if (arpq) + handle_failed_resolution(dev, arpq); +} + +struct l2t_data *t3_init_l2t(unsigned int l2t_capacity) +{ + struct l2t_data *d; + int i, size = sizeof(*d) + l2t_capacity * sizeof(struct l2t_entry); + + d = cxgb_alloc_mem(size); + if (!d) + return NULL; + + d->nentries = l2t_capacity; + d->rover = &d->l2tab[1]; /* entry 0 is not used */ + atomic_set(&d->nfree, l2t_capacity - 1); + rwlock_init(&d->lock); + + for (i = 0; i < l2t_capacity; ++i) { + d->l2tab[i].idx = i; + d->l2tab[i].state = L2T_STATE_UNUSED; + spin_lock_init(&d->l2tab[i].lock); + atomic_set(&d->l2tab[i].refcnt, 0); + } + return d; +} + +void t3_free_l2t(struct l2t_data *d) +{ + cxgb_free_mem(d); +} + diff --git a/drivers/net/cxgb3/l2t.h b/drivers/net/cxgb3/l2t.h new file mode 100644 index 00000000000..51a9c1f2c58 --- /dev/null +++ b/drivers/net/cxgb3/l2t.h @@ -0,0 +1,143 @@ +/* + * Copyright (c) 2006 Chelsio, Inc. All rights reserved. + * Copyright (c) 2006 Open Grid Computing, Inc. All rights reserved. + * + * This software is available to you under a choice of one of two + * licenses. You may choose to be licensed under the terms of the GNU + * General Public License (GPL) Version 2, available from the file + * COPYING in the main directory of this source tree, or the + * OpenIB.org BSD license below: + * + * Redistribution and use in source and binary forms, with or + * without modification, are permitted provided that the following + * conditions are met: + * + * - Redistributions of source code must retain the above + * copyright notice, this list of conditions and the following + * disclaimer. + * + * - Redistributions in binary form must reproduce the above + * copyright notice, this list of conditions and the following + * disclaimer in the documentation and/or other materials + * provided with the distribution. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + */ +#ifndef _CHELSIO_L2T_H +#define _CHELSIO_L2T_H + +#include <linux/spinlock.h> +#include "t3cdev.h" +#include <asm/atomic.h> + +enum { + L2T_STATE_VALID, /* entry is up to date */ + L2T_STATE_STALE, /* entry may be used but needs revalidation */ + L2T_STATE_RESOLVING, /* entry needs address resolution */ + L2T_STATE_UNUSED /* entry not in use */ +}; + +struct neighbour; +struct sk_buff; + +/* + * Each L2T entry plays multiple roles. First of all, it keeps state for the + * corresponding entry of the HW L2 table and maintains a queue of offload + * packets awaiting address resolution. Second, it is a node of a hash table + * chain, where the nodes of the chain are linked together through their next + * pointer. Finally, each node is a bucket of a hash table, pointing to the + * first element in its chain through its first pointer. + */ +struct l2t_entry { + u16 state; /* entry state */ + u16 idx; /* entry index */ + u32 addr; /* dest IP address */ + int ifindex; /* neighbor's net_device's ifindex */ + u16 smt_idx; /* SMT index */ + u16 vlan; /* VLAN TCI (id: bits 0-11, prio: 13-15 */ + struct neighbour *neigh; /* associated neighbour */ + struct l2t_entry *first; /* start of hash chain */ + struct l2t_entry *next; /* next l2t_entry on chain */ + struct sk_buff *arpq_head; /* queue of packets awaiting resolution */ + struct sk_buff *arpq_tail; + spinlock_t lock; + atomic_t refcnt; /* entry reference count */ + u8 dmac[6]; /* neighbour's MAC address */ +}; + +struct l2t_data { + unsigned int nentries; /* number of entries */ + struct l2t_entry *rover; /* starting point for next allocation */ + atomic_t nfree; /* number of free entries */ + rwlock_t lock; + struct l2t_entry l2tab[0]; +}; + +typedef void (*arp_failure_handler_func)(struct t3cdev * dev, + struct sk_buff * skb); + +/* + * Callback stored in an skb to handle address resolution failure. + */ +struct l2t_skb_cb { + arp_failure_handler_func arp_failure_handler; +}; + +#define L2T_SKB_CB(skb) ((struct l2t_skb_cb *)(skb)->cb) + +static inline void set_arp_failure_handler(struct sk_buff *skb, + arp_failure_handler_func hnd) +{ + L2T_SKB_CB(skb)->arp_failure_handler = hnd; +} + +/* + * Getting to the L2 data from an offload device. + */ +#define L2DATA(dev) ((dev)->l2opt) + +#define W_TCB_L2T_IX 0 +#define S_TCB_L2T_IX 7 +#define M_TCB_L2T_IX 0x7ffULL +#define V_TCB_L2T_IX(x) ((x) << S_TCB_L2T_IX) + +void t3_l2e_free(struct l2t_data *d, struct l2t_entry *e); +void t3_l2t_update(struct t3cdev *dev, struct neighbour *neigh); +struct l2t_entry *t3_l2t_get(struct t3cdev *cdev, struct neighbour *neigh, + struct net_device *dev); +int t3_l2t_send_slow(struct t3cdev *dev, struct sk_buff *skb, + struct l2t_entry *e); +void t3_l2t_send_event(struct t3cdev *dev, struct l2t_entry *e); +struct l2t_data *t3_init_l2t(unsigned int l2t_capacity); +void t3_free_l2t(struct l2t_data *d); + +int cxgb3_ofld_send(struct t3cdev *dev, struct sk_buff *skb); + +static inline int l2t_send(struct t3cdev *dev, struct sk_buff *skb, + struct l2t_entry *e) +{ + if (likely(e->state == L2T_STATE_VALID)) + return cxgb3_ofld_send(dev, skb); + return t3_l2t_send_slow(dev, skb, e); +} + +static inline void l2t_release(struct l2t_data *d, struct l2t_entry *e) +{ + if (atomic_dec_and_test(&e->refcnt)) + t3_l2e_free(d, e); +} + +static inline void l2t_hold(struct l2t_data *d, struct l2t_entry *e) +{ + if (atomic_add_return(1, &e->refcnt) == 1) /* 0 -> 1 transition */ + atomic_dec(&d->nfree); +} + +#endif diff --git a/drivers/net/cxgb3/mc5.c b/drivers/net/cxgb3/mc5.c new file mode 100644 index 00000000000..44fa9eaedcc --- /dev/null +++ b/drivers/net/cxgb3/mc5.c @@ -0,0 +1,453 @@ +/* + * This file is part of the Chelsio T3 Ethernet driver. + * + * Copyright (C) 2003-2006 Chelsio Communications. All rights reserved. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the LICENSE file included in this + * release for licensing terms and conditions. + */ + +#include "common.h" +#include "regs.h" + +enum { + IDT75P52100 = 4, + IDT75N43102 = 5 +}; + +/* DBGI command mode */ +enum { + DBGI_MODE_MBUS = 0, + DBGI_MODE_IDT52100 = 5 +}; + +/* IDT 75P52100 commands */ +#define IDT_CMD_READ 0 +#define IDT_CMD_WRITE 1 +#define IDT_CMD_SEARCH 2 +#define IDT_CMD_LEARN 3 + +/* IDT LAR register address and value for 144-bit mode (low 32 bits) */ +#define IDT_LAR_ADR0 0x180006 +#define IDT_LAR_MODE144 0xffff0000 + +/* IDT SCR and SSR addresses (low 32 bits) */ +#define IDT_SCR_ADR0 0x180000 +#define IDT_SSR0_ADR0 0x180002 +#define IDT_SSR1_ADR0 0x180004 + +/* IDT GMR base address (low 32 bits) */ +#define IDT_GMR_BASE_ADR0 0x180020 + +/* IDT data and mask array base addresses (low 32 bits) */ +#define IDT_DATARY_BASE_ADR0 0 +#define IDT_MSKARY_BASE_ADR0 0x80000 + +/* IDT 75N43102 commands */ +#define IDT4_CMD_SEARCH144 3 +#define IDT4_CMD_WRITE 4 +#define IDT4_CMD_READ 5 + +/* IDT 75N43102 SCR address (low 32 bits) */ +#define IDT4_SCR_ADR0 0x3 + +/* IDT 75N43102 GMR base addresses (low 32 bits) */ +#define IDT4_GMR_BASE0 0x10 +#define IDT4_GMR_BASE1 0x20 +#define IDT4_GMR_BASE2 0x30 + +/* IDT 75N43102 data and mask array base addresses (low 32 bits) */ +#define IDT4_DATARY_BASE_ADR0 0x1000000 +#define IDT4_MSKARY_BASE_ADR0 0x2000000 + +#define MAX_WRITE_ATTEMPTS 5 + +#define MAX_ROUTES 2048 + +/* + * Issue a command to the TCAM and wait for its completion. The address and + * any data required by the command must have been setup by the caller. + */ +static int mc5_cmd_write(struct adapter *adapter, u32 cmd) +{ + t3_write_reg(adapter, A_MC5_DB_DBGI_REQ_CMD, cmd); + return t3_wait_op_done(adapter, A_MC5_DB_DBGI_RSP_STATUS, + F_DBGIRSPVALID, 1, MAX_WRITE_ATTEMPTS, 1); +} + +static inline void dbgi_wr_addr3(struct adapter *adapter, u32 v1, u32 v2, + u32 v3) +{ + t3_write_reg(adapter, A_MC5_DB_DBGI_REQ_ADDR0, v1); + t3_write_reg(adapter, A_MC5_DB_DBGI_REQ_ADDR1, v2); + t3_write_reg(adapter, A_MC5_DB_DBGI_REQ_ADDR2, v3); +} + +static inline void dbgi_wr_data3(struct adapter *adapter, u32 v1, u32 v2, + u32 v3) +{ + t3_write_reg(adapter, A_MC5_DB_DBGI_REQ_DATA0, v1); + t3_write_reg(adapter, A_MC5_DB_DBGI_REQ_DATA1, v2); + t3_write_reg(adapter, A_MC5_DB_DBGI_REQ_DATA2, v3); +} + +static inline void dbgi_rd_rsp3(struct adapter *adapter, u32 *v1, u32 *v2, + u32 *v3) +{ + *v1 = t3_read_reg(adapter, A_MC5_DB_DBGI_RSP_DATA0); + *v2 = t3_read_reg(adapter, A_MC5_DB_DBGI_RSP_DATA1); + *v3 = t3_read_reg(adapter, A_MC5_DB_DBGI_RSP_DATA2); +} + +/* + * Write data to the TCAM register at address (0, 0, addr_lo) using the TCAM + * command cmd. The data to be written must have been set up by the caller. + * Returns -1 on failure, 0 on success. + */ +static int mc5_write(struct adapter *adapter, u32 addr_lo, u32 cmd) +{ + t3_write_reg(adapter, A_MC5_DB_DBGI_REQ_ADDR0, addr_lo); + if (mc5_cmd_write(adapter, cmd) == 0) + return 0; + CH_ERR(adapter, "MC5 timeout writing to TCAM address 0x%x\n", + addr_lo); + return -1; +} + +static int init_mask_data_array(struct mc5 *mc5, u32 mask_array_base, + u32 data_array_base, u32 write_cmd, + int addr_shift) +{ + unsigned int i; + struct adapter *adap = mc5->adapter; + + /* + * We need the size of the TCAM data and mask arrays in terms of + * 72-bit entries. + */ + unsigned int size72 = mc5->tcam_size; + unsigned int server_base = t3_read_reg(adap, A_MC5_DB_SERVER_INDEX); + + if (mc5->mode == MC5_MODE_144_BIT) { + size72 *= 2; /* 1 144-bit entry is 2 72-bit entries */ + server_base *= 2; + } + + /* Clear the data array */ + dbgi_wr_data3(adap, 0, 0, 0); + for (i = 0; i < size72; i++) + if (mc5_write(adap, data_array_base + (i << addr_shift), + write_cmd)) + return -1; + + /* Initialize the mask array. */ + dbgi_wr_data3(adap, 0xffffffff, 0xffffffff, 0xff); + for (i = 0; i < size72; i++) { + if (i == server_base) /* entering server or routing region */ + t3_write_reg(adap, A_MC5_DB_DBGI_REQ_DATA0, + mc5->mode == MC5_MODE_144_BIT ? + 0xfffffff9 : 0xfffffffd); + if (mc5_write(adap, mask_array_base + (i << addr_shift), + write_cmd)) + return -1; + } + return 0; +} + +static int init_idt52100(struct mc5 *mc5) +{ + int i; + struct adapter *adap = mc5->adapter; + + t3_write_reg(adap, A_MC5_DB_RSP_LATENCY, + V_RDLAT(0x15) | V_LRNLAT(0x15) | V_SRCHLAT(0x15)); + t3_write_reg(adap, A_MC5_DB_PART_ID_INDEX, 2); + + /* + * Use GMRs 14-15 for ELOOKUP, GMRs 12-13 for SYN lookups, and + * GMRs 8-9 for ACK- and AOPEN searches. + */ + t3_write_reg(adap, A_MC5_DB_POPEN_DATA_WR_CMD, IDT_CMD_WRITE); + t3_write_reg(adap, A_MC5_DB_POPEN_MASK_WR_CMD, IDT_CMD_WRITE); + t3_write_reg(adap, A_MC5_DB_AOPEN_SRCH_CMD, IDT_CMD_SEARCH); + t3_write_reg(adap, A_MC5_DB_AOPEN_LRN_CMD, IDT_CMD_LEARN); + t3_write_reg(adap, A_MC5_DB_SYN_SRCH_CMD, IDT_CMD_SEARCH | 0x6000); + t3_write_reg(adap, A_MC5_DB_SYN_LRN_CMD, IDT_CMD_LEARN); + t3_write_reg(adap, A_MC5_DB_ACK_SRCH_CMD, IDT_CMD_SEARCH); + t3_write_reg(adap, A_MC5_DB_ACK_LRN_CMD, IDT_CMD_LEARN); + t3_write_reg(adap, A_MC5_DB_ILOOKUP_CMD, IDT_CMD_SEARCH); + t3_write_reg(adap, A_MC5_DB_ELOOKUP_CMD, IDT_CMD_SEARCH | 0x7000); + t3_write_reg(adap, A_MC5_DB_DATA_WRITE_CMD, IDT_CMD_WRITE); + t3_write_reg(adap, A_MC5_DB_DATA_READ_CMD, IDT_CMD_READ); + + /* Set DBGI command mode for IDT TCAM. */ + t3_write_reg(adap, A_MC5_DB_DBGI_CONFIG, DBGI_MODE_IDT52100); + + /* Set up LAR */ + dbgi_wr_data3(adap, IDT_LAR_MODE144, 0, 0); + if (mc5_write(adap, IDT_LAR_ADR0, IDT_CMD_WRITE)) + goto err; + + /* Set up SSRs */ + dbgi_wr_data3(adap, 0xffffffff, 0xffffffff, 0); + if (mc5_write(adap, IDT_SSR0_ADR0, IDT_CMD_WRITE) || + mc5_write(adap, IDT_SSR1_ADR0, IDT_CMD_WRITE)) + goto err; + + /* Set up GMRs */ + for (i = 0; i < 32; ++i) { + if (i >= 12 && i < 15) + dbgi_wr_data3(adap, 0xfffffff9, 0xffffffff, 0xff); + else if (i == 15) + dbgi_wr_data3(adap, 0xfffffff9, 0xffff8007, 0xff); + else + dbgi_wr_data3(adap, 0xffffffff, 0xffffffff, 0xff); + + if (mc5_write(adap, IDT_GMR_BASE_ADR0 + i, IDT_CMD_WRITE)) + goto err; + } + + /* Set up SCR */ + dbgi_wr_data3(adap, 1, 0, 0); + if (mc5_write(adap, IDT_SCR_ADR0, IDT_CMD_WRITE)) + goto err; + + return init_mask_data_array(mc5, IDT_MSKARY_BASE_ADR0, + IDT_DATARY_BASE_ADR0, IDT_CMD_WRITE, 0); +err: + return -EIO; +} + +static int init_idt43102(struct mc5 *mc5) +{ + int i; + struct adapter *adap = mc5->adapter; + + t3_write_reg(adap, A_MC5_DB_RSP_LATENCY, + adap->params.rev == 0 ? V_RDLAT(0xd) | V_SRCHLAT(0x11) : + V_RDLAT(0xd) | V_SRCHLAT(0x12)); + + /* + * Use GMRs 24-25 for ELOOKUP, GMRs 20-21 for SYN lookups, and no mask + * for ACK- and AOPEN searches. + */ + t3_write_reg(adap, A_MC5_DB_POPEN_DATA_WR_CMD, IDT4_CMD_WRITE); + t3_write_reg(adap, A_MC5_DB_POPEN_MASK_WR_CMD, IDT4_CMD_WRITE); + t3_write_reg(adap, A_MC5_DB_AOPEN_SRCH_CMD, + IDT4_CMD_SEARCH144 | 0x3800); + t3_write_reg(adap, A_MC5_DB_SYN_SRCH_CMD, IDT4_CMD_SEARCH144); + t3_write_reg(adap, A_MC5_DB_ACK_SRCH_CMD, IDT4_CMD_SEARCH144 | 0x3800); + t3_write_reg(adap, A_MC5_DB_ILOOKUP_CMD, IDT4_CMD_SEARCH144 | 0x3800); + t3_write_reg(adap, A_MC5_DB_ELOOKUP_CMD, IDT4_CMD_SEARCH144 | 0x800); + t3_write_reg(adap, A_MC5_DB_DATA_WRITE_CMD, IDT4_CMD_WRITE); + t3_write_reg(adap, A_MC5_DB_DATA_READ_CMD, IDT4_CMD_READ); + + t3_write_reg(adap, A_MC5_DB_PART_ID_INDEX, 3); + + /* Set DBGI command mode for IDT TCAM. */ + t3_write_reg(adap, A_MC5_DB_DBGI_CONFIG, DBGI_MODE_IDT52100); + + /* Set up GMRs */ + dbgi_wr_data3(adap, 0xffffffff, 0xffffffff, 0xff); + for (i = 0; i < 7; ++i) + if (mc5_write(adap, IDT4_GMR_BASE0 + i, IDT4_CMD_WRITE)) + goto err; + + for (i = 0; i < 4; ++i) + if (mc5_write(adap, IDT4_GMR_BASE2 + i, IDT4_CMD_WRITE)) + goto err; + + dbgi_wr_data3(adap, 0xfffffff9, 0xffffffff, 0xff); + if (mc5_write(adap, IDT4_GMR_BASE1, IDT4_CMD_WRITE) || + mc5_write(adap, IDT4_GMR_BASE1 + 1, IDT4_CMD_WRITE) || + mc5_write(adap, IDT4_GMR_BASE1 + 4, IDT4_CMD_WRITE)) + goto err; + + dbgi_wr_data3(adap, 0xfffffff9, 0xffff8007, 0xff); + if (mc5_write(adap, IDT4_GMR_BASE1 + 5, IDT4_CMD_WRITE)) + goto err; + + /* Set up SCR */ + dbgi_wr_data3(adap, 0xf0000000, 0, 0); + if (mc5_write(adap, IDT4_SCR_ADR0, IDT4_CMD_WRITE)) + goto err; + + return init_mask_data_array(mc5, IDT4_MSKARY_BASE_ADR0, + IDT4_DATARY_BASE_ADR0, IDT4_CMD_WRITE, 1); +err: + return -EIO; +} + +/* Put MC5 in DBGI mode. */ +static inline void mc5_dbgi_mode_enable(const struct mc5 *mc5) +{ + t3_write_reg(mc5->adapter, A_MC5_DB_CONFIG, + V_TMMODE(mc5->mode == MC5_MODE_72_BIT) | F_DBGIEN); +} + +/* Put MC5 in M-Bus mode. */ +static void mc5_dbgi_mode_disable(const struct mc5 *mc5) +{ + t3_write_reg(mc5->adapter, A_MC5_DB_CONFIG, + V_TMMODE(mc5->mode == MC5_MODE_72_BIT) | + V_COMPEN(mc5->mode == MC5_MODE_72_BIT) | + V_PRTYEN(mc5->parity_enabled) | F_MBUSEN); +} + +/* + * Initialization that requires the OS and protocol layers to already + * be intialized goes here. + */ +int t3_mc5_init(struct mc5 *mc5, unsigned int nservers, unsigned int nfilters, + unsigned int nroutes) +{ + u32 cfg; + int err; + unsigned int tcam_size = mc5->tcam_size; + struct adapter *adap = mc5->adapter; + + if (nroutes > MAX_ROUTES || nroutes + nservers + nfilters > tcam_size) + return -EINVAL; + + /* Reset the TCAM */ + cfg = t3_read_reg(adap, A_MC5_DB_CONFIG) & ~F_TMMODE; + cfg |= V_TMMODE(mc5->mode == MC5_MODE_72_BIT) | F_TMRST; + t3_write_reg(adap, A_MC5_DB_CONFIG, cfg); + if (t3_wait_op_done(adap, A_MC5_DB_CONFIG, F_TMRDY, 1, 500, 0)) { + CH_ERR(adap, "TCAM reset timed out\n"); + return -1; + } + + t3_write_reg(adap, A_MC5_DB_ROUTING_TABLE_INDEX, tcam_size - nroutes); + t3_write_reg(adap, A_MC5_DB_FILTER_TABLE, + tcam_size - nroutes - nfilters); + t3_write_reg(adap, A_MC5_DB_SERVER_INDEX, + tcam_size - nroutes - nfilters - nservers); + + mc5->parity_enabled = 1; + + /* All the TCAM addresses we access have only the low 32 bits non 0 */ + t3_write_reg(adap, A_MC5_DB_DBGI_REQ_ADDR1, 0); + t3_write_reg(adap, A_MC5_DB_DBGI_REQ_ADDR2, 0); + + mc5_dbgi_mode_enable(mc5); + + switch (mc5->part_type) { + case IDT75P52100: + err = init_idt52100(mc5); + break; + case IDT75N43102: + err = init_idt43102(mc5); + break; + default: + CH_ERR(adap, "Unsupported TCAM type %d\n", mc5->part_type); + err = -EINVAL; + break; + } + + mc5_dbgi_mode_disable(mc5); + return err; +} + +/* + * read_mc5_range - dump a part of the memory managed by MC5 + * @mc5: the MC5 handle + * @start: the start address for the dump + * @n: number of 72-bit words to read + * @buf: result buffer + * + * Read n 72-bit words from MC5 memory from the given start location. + */ +int t3_read_mc5_range(const struct mc5 *mc5, unsigned int start, + unsigned int n, u32 *buf) +{ + u32 read_cmd; + int err = 0; + struct adapter *adap = mc5->adapter; + + if (mc5->part_type == IDT75P52100) + read_cmd = IDT_CMD_READ; + else if (mc5->part_type == IDT75N43102) + read_cmd = IDT4_CMD_READ; + else + return -EINVAL; + + mc5_dbgi_mode_enable(mc5); + + while (n--) { + t3_write_reg(adap, A_MC5_DB_DBGI_REQ_ADDR0, start++); + if (mc5_cmd_write(adap, read_cmd)) { + err = -EIO; + break; + } + dbgi_rd_rsp3(adap, buf + 2, buf + 1, buf); + buf += 3; + } + + mc5_dbgi_mode_disable(mc5); + return 0; +} + +#define MC5_INT_FATAL (F_PARITYERR | F_REQQPARERR | F_DISPQPARERR) + +/* + * MC5 interrupt handler + */ +void t3_mc5_intr_handler(struct mc5 *mc5) +{ + struct adapter *adap = mc5->adapter; + u32 cause = t3_read_reg(adap, A_MC5_DB_INT_CAUSE); + + if ((cause & F_PARITYERR) && mc5->parity_enabled) { + CH_ALERT(adap, "MC5 parity error\n"); + mc5->stats.parity_err++; + } + + if (cause & F_REQQPARERR) { + CH_ALERT(adap, "MC5 request queue parity error\n"); + mc5->stats.reqq_parity_err++; + } + + if (cause & F_DISPQPARERR) { + CH_ALERT(adap, "MC5 dispatch queue parity error\n"); + mc5->stats.dispq_parity_err++; + } + + if (cause & F_ACTRGNFULL) + mc5->stats.active_rgn_full++; + if (cause & F_NFASRCHFAIL) + mc5->stats.nfa_srch_err++; + if (cause & F_UNKNOWNCMD) + mc5->stats.unknown_cmd++; + if (cause & F_DELACTEMPTY) + mc5->stats.del_act_empty++; + if (cause & MC5_INT_FATAL) + t3_fatal_err(adap); + + t3_write_reg(adap, A_MC5_DB_INT_CAUSE, cause); +} + +void __devinit t3_mc5_prep(struct adapter *adapter, struct mc5 *mc5, int mode) +{ +#define K * 1024 + + static unsigned int tcam_part_size[] = { /* in K 72-bit entries */ + 64 K, 128 K, 256 K, 32 K + }; + +#undef K + + u32 cfg = t3_read_reg(adapter, A_MC5_DB_CONFIG); + + mc5->adapter = adapter; + mc5->mode = (unsigned char)mode; + mc5->part_type = (unsigned char)G_TMTYPE(cfg); + if (cfg & F_TMTYPEHI) + mc5->part_type |= 4; + + mc5->tcam_size = tcam_part_size[G_TMPARTSIZE(cfg)]; + if (mode == MC5_MODE_144_BIT) + mc5->tcam_size /= 2; +} diff --git a/drivers/net/cxgb3/regs.h b/drivers/net/cxgb3/regs.h new file mode 100644 index 00000000000..b56c5f52bcd --- /dev/null +++ b/drivers/net/cxgb3/regs.h @@ -0,0 +1,2195 @@ +#define A_SG_CONTROL 0x0 + +#define S_DROPPKT 20 +#define V_DROPPKT(x) ((x) << S_DROPPKT) +#define F_DROPPKT V_DROPPKT(1U) + +#define S_EGRGENCTRL 19 +#define V_EGRGENCTRL(x) ((x) << S_EGRGENCTRL) +#define F_EGRGENCTRL V_EGRGENCTRL(1U) + +#define S_USERSPACESIZE 14 +#define M_USERSPACESIZE 0x1f +#define V_USERSPACESIZE(x) ((x) << S_USERSPACESIZE) + +#define S_HOSTPAGESIZE 11 +#define M_HOSTPAGESIZE 0x7 +#define V_HOSTPAGESIZE(x) ((x) << S_HOSTPAGESIZE) + +#define S_FLMODE 9 +#define V_FLMODE(x) ((x) << S_FLMODE) +#define F_FLMODE V_FLMODE(1U) + +#define S_PKTSHIFT 6 +#define M_PKTSHIFT 0x7 +#define V_PKTSHIFT(x) ((x) << S_PKTSHIFT) + +#define S_ONEINTMULTQ 5 +#define V_ONEINTMULTQ(x) ((x) << S_ONEINTMULTQ) +#define F_ONEINTMULTQ V_ONEINTMULTQ(1U) + +#define S_BIGENDIANINGRESS 2 +#define V_BIGENDIANINGRESS(x) ((x) << S_BIGENDIANINGRESS) +#define F_BIGENDIANINGRESS V_BIGENDIANINGRESS(1U) + +#define S_ISCSICOALESCING 1 +#define V_ISCSICOALESCING(x) ((x) << S_ISCSICOALESCING) +#define F_ISCSICOALESCING V_ISCSICOALESCING(1U) + +#define S_GLOBALENABLE 0 +#define V_GLOBALENABLE(x) ((x) << S_GLOBALENABLE) +#define F_GLOBALENABLE V_GLOBALENABLE(1U) + +#define S_AVOIDCQOVFL 24 +#define V_AVOIDCQOVFL(x) ((x) << S_AVOIDCQOVFL) +#define F_AVOIDCQOVFL V_AVOIDCQOVFL(1U) + +#define S_OPTONEINTMULTQ 23 +#define V_OPTONEINTMULTQ(x) ((x) << S_OPTONEINTMULTQ) +#define F_OPTONEINTMULTQ V_OPTONEINTMULTQ(1U) + +#define S_CQCRDTCTRL 22 +#define V_CQCRDTCTRL(x) ((x) << S_CQCRDTCTRL) +#define F_CQCRDTCTRL V_CQCRDTCTRL(1U) + +#define A_SG_KDOORBELL 0x4 + +#define S_SELEGRCNTX 31 +#define V_SELEGRCNTX(x) ((x) << S_SELEGRCNTX) +#define F_SELEGRCNTX V_SELEGRCNTX(1U) + +#define S_EGRCNTX 0 +#define M_EGRCNTX 0xffff +#define V_EGRCNTX(x) ((x) << S_EGRCNTX) + +#define A_SG_GTS 0x8 + +#define S_RSPQ 29 +#define M_RSPQ 0x7 +#define V_RSPQ(x) ((x) << S_RSPQ) +#define G_RSPQ(x) (((x) >> S_RSPQ) & M_RSPQ) + +#define S_NEWTIMER 16 +#define M_NEWTIMER 0x1fff +#define V_NEWTIMER(x) ((x) << S_NEWTIMER) + +#define S_NEWINDEX 0 +#define M_NEWINDEX 0xffff +#define V_NEWINDEX(x) ((x) << S_NEWINDEX) + +#define A_SG_CONTEXT_CMD 0xc + +#define S_CONTEXT_CMD_OPCODE 28 +#define M_CONTEXT_CMD_OPCODE 0xf +#define V_CONTEXT_CMD_OPCODE(x) ((x) << S_CONTEXT_CMD_OPCODE) + +#define S_CONTEXT_CMD_BUSY 27 +#define V_CONTEXT_CMD_BUSY(x) ((x) << S_CONTEXT_CMD_BUSY) +#define F_CONTEXT_CMD_BUSY V_CONTEXT_CMD_BUSY(1U) + +#define S_CQ_CREDIT 20 + +#define M_CQ_CREDIT 0x7f + +#define V_CQ_CREDIT(x) ((x) << S_CQ_CREDIT) + +#define G_CQ_CREDIT(x) (((x) >> S_CQ_CREDIT) & M_CQ_CREDIT) + +#define S_CQ 19 + +#define V_CQ(x) ((x) << S_CQ) +#define F_CQ V_CQ(1U) + +#define S_RESPONSEQ 18 +#define V_RESPONSEQ(x) ((x) << S_RESPONSEQ) +#define F_RESPONSEQ V_RESPONSEQ(1U) + +#define S_EGRESS 17 +#define V_EGRESS(x) ((x) << S_EGRESS) +#define F_EGRESS V_EGRESS(1U) + +#define S_FREELIST 16 +#define V_FREELIST(x) ((x) << S_FREELIST) +#define F_FREELIST V_FREELIST(1U) + +#define S_CONTEXT 0 +#define M_CONTEXT 0xffff +#define V_CONTEXT(x) ((x) << S_CONTEXT) + +#define G_CONTEXT(x) (((x) >> S_CONTEXT) & M_CONTEXT) + +#define A_SG_CONTEXT_DATA0 0x10 + +#define A_SG_CONTEXT_DATA1 0x14 + +#define A_SG_CONTEXT_DATA2 0x18 + +#define A_SG_CONTEXT_DATA3 0x1c + +#define A_SG_CONTEXT_MASK0 0x20 + +#define A_SG_CONTEXT_MASK1 0x24 + +#define A_SG_CONTEXT_MASK2 0x28 + +#define A_SG_CONTEXT_MASK3 0x2c + +#define A_SG_RSPQ_CREDIT_RETURN 0x30 + +#define S_CREDITS 0 +#define M_CREDITS 0xffff +#define V_CREDITS(x) ((x) << S_CREDITS) + +#define A_SG_DATA_INTR 0x34 + +#define S_ERRINTR 31 +#define V_ERRINTR(x) ((x) << S_ERRINTR) +#define F_ERRINTR V_ERRINTR(1U) + +#define A_SG_HI_DRB_HI_THRSH 0x38 + +#define A_SG_HI_DRB_LO_THRSH 0x3c + +#define A_SG_LO_DRB_HI_THRSH 0x40 + +#define A_SG_LO_DRB_LO_THRSH 0x44 + +#define A_SG_RSPQ_FL_STATUS 0x4c + +#define S_RSPQ0DISABLED 8 + +#define A_SG_EGR_RCQ_DRB_THRSH 0x54 + +#define S_HIRCQDRBTHRSH 16 +#define M_HIRCQDRBTHRSH 0x7ff +#define V_HIRCQDRBTHRSH(x) ((x) << S_HIRCQDRBTHRSH) + +#define S_LORCQDRBTHRSH 0 +#define M_LORCQDRBTHRSH 0x7ff +#define V_LORCQDRBTHRSH(x) ((x) << S_LORCQDRBTHRSH) + +#define A_SG_EGR_CNTX_BADDR 0x58 + +#define A_SG_INT_CAUSE 0x5c + +#define S_RSPQDISABLED 3 +#define V_RSPQDISABLED(x) ((x) << S_RSPQDISABLED) +#define F_RSPQDISABLED V_RSPQDISABLED(1U) + +#define S_RSPQCREDITOVERFOW 2 +#define V_RSPQCREDITOVERFOW(x) ((x) << S_RSPQCREDITOVERFOW) +#define F_RSPQCREDITOVERFOW V_RSPQCREDITOVERFOW(1U) + +#define A_SG_INT_ENABLE 0x60 + +#define A_SG_CMDQ_CREDIT_TH 0x64 + +#define S_TIMEOUT 8 +#define M_TIMEOUT 0xffffff +#define V_TIMEOUT(x) ((x) << S_TIMEOUT) + +#define S_THRESHOLD 0 +#define M_THRESHOLD 0xff +#define V_THRESHOLD(x) ((x) << S_THRESHOLD) + +#define A_SG_TIMER_TICK 0x68 + +#define A_SG_CQ_CONTEXT_BADDR 0x6c + +#define A_SG_OCO_BASE 0x70 + +#define S_BASE1 16 +#define M_BASE1 0xffff +#define V_BASE1(x) ((x) << S_BASE1) + +#define A_SG_DRB_PRI_THRESH 0x74 + +#define A_PCIX_INT_ENABLE 0x80 + +#define S_MSIXPARERR 22 +#define M_MSIXPARERR 0x7 + +#define V_MSIXPARERR(x) ((x) << S_MSIXPARERR) + +#define S_CFPARERR 18 +#define M_CFPARERR 0xf + +#define V_CFPARERR(x) ((x) << S_CFPARERR) + +#define S_RFPARERR 14 +#define M_RFPARERR 0xf + +#define V_RFPARERR(x) ((x) << S_RFPARERR) + +#define S_WFPARERR 12 +#define M_WFPARERR 0x3 + +#define V_WFPARERR(x) ((x) << S_WFPARERR) + +#define S_PIOPARERR 11 +#define V_PIOPARERR(x) ((x) << S_PIOPARERR) +#define F_PIOPARERR V_PIOPARERR(1U) + +#define S_DETUNCECCERR 10 +#define V_DETUNCECCERR(x) ((x) << S_DETUNCECCERR) +#define F_DETUNCECCERR V_DETUNCECCERR(1U) + +#define S_DETCORECCERR 9 +#define V_DETCORECCERR(x) ((x) << S_DETCORECCERR) +#define F_DETCORECCERR V_DETCORECCERR(1U) + +#define S_RCVSPLCMPERR 8 +#define V_RCVSPLCMPERR(x) ((x) << S_RCVSPLCMPERR) +#define F_RCVSPLCMPERR V_RCVSPLCMPERR(1U) + +#define S_UNXSPLCMP 7 +#define V_UNXSPLCMP(x) ((x) << S_UNXSPLCMP) +#define F_UNXSPLCMP V_UNXSPLCMP(1U) + +#define S_SPLCMPDIS 6 +#define V_SPLCMPDIS(x) ((x) << S_SPLCMPDIS) +#define F_SPLCMPDIS V_SPLCMPDIS(1U) + +#define S_DETPARERR 5 +#define V_DETPARERR(x) ((x) << S_DETPARERR) +#define F_DETPARERR V_DETPARERR(1U) + +#define S_SIGSYSERR 4 +#define V_SIGSYSERR(x) ((x) << S_SIGSYSERR) +#define F_SIGSYSERR V_SIGSYSERR(1U) + +#define S_RCVMSTABT 3 +#define V_RCVMSTABT(x) ((x) << S_RCVMSTABT) +#define F_RCVMSTABT V_RCVMSTABT(1U) + +#define S_RCVTARABT 2 +#define V_RCVTARABT(x) ((x) << S_RCVTARABT) +#define F_RCVTARABT V_RCVTARABT(1U) + +#define S_SIGTARABT 1 +#define V_SIGTARABT(x) ((x) << S_SIGTARABT) +#define F_SIGTARABT V_SIGTARABT(1U) + +#define S_MSTDETPARERR 0 +#define V_MSTDETPARERR(x) ((x) << S_MSTDETPARERR) +#define F_MSTDETPARERR V_MSTDETPARERR(1U) + +#define A_PCIX_INT_CAUSE 0x84 + +#define A_PCIX_CFG 0x88 + +#define S_CLIDECEN 18 +#define V_CLIDECEN(x) ((x) << S_CLIDECEN) +#define F_CLIDECEN V_CLIDECEN(1U) + +#define A_PCIX_MODE 0x8c + +#define S_PCLKRANGE 6 +#define M_PCLKRANGE 0x3 +#define V_PCLKRANGE(x) ((x) << S_PCLKRANGE) +#define G_PCLKRANGE(x) (((x) >> S_PCLKRANGE) & M_PCLKRANGE) + +#define S_PCIXINITPAT 2 +#define M_PCIXINITPAT 0xf +#define V_PCIXINITPAT(x) ((x) << S_PCIXINITPAT) +#define G_PCIXINITPAT(x) (((x) >> S_PCIXINITPAT) & M_PCIXINITPAT) + +#define S_64BIT 0 +#define V_64BIT(x) ((x) << S_64BIT) +#define F_64BIT V_64BIT(1U) + +#define A_PCIE_INT_ENABLE 0x80 + +#define S_BISTERR 15 +#define M_BISTERR 0xff + +#define V_BISTERR(x) ((x) << S_BISTERR) + +#define S_PCIE_MSIXPARERR 12 +#define M_PCIE_MSIXPARERR 0x7 + +#define V_PCIE_MSIXPARERR(x) ((x) << S_PCIE_MSIXPARERR) + +#define S_PCIE_CFPARERR 11 +#define V_PCIE_CFPARERR(x) ((x) << S_PCIE_CFPARERR) +#define F_PCIE_CFPARERR V_PCIE_CFPARERR(1U) + +#define S_PCIE_RFPARERR 10 +#define V_PCIE_RFPARERR(x) ((x) << S_PCIE_RFPARERR) +#define F_PCIE_RFPARERR V_PCIE_RFPARERR(1U) + +#define S_PCIE_WFPARERR 9 +#define V_PCIE_WFPARERR(x) ((x) << S_PCIE_WFPARERR) +#define F_PCIE_WFPARERR V_PCIE_WFPARERR(1U) + +#define S_PCIE_PIOPARERR 8 +#define V_PCIE_PIOPARERR(x) ((x) << S_PCIE_PIOPARERR) +#define F_PCIE_PIOPARERR V_PCIE_PIOPARERR(1U) + +#define S_UNXSPLCPLERRC 7 +#define V_UNXSPLCPLERRC(x) ((x) << S_UNXSPLCPLERRC) +#define F_UNXSPLCPLERRC V_UNXSPLCPLERRC(1U) + +#define S_UNXSPLCPLERRR 6 +#define V_UNXSPLCPLERRR(x) ((x) << S_UNXSPLCPLERRR) +#define F_UNXSPLCPLERRR V_UNXSPLCPLERRR(1U) + +#define S_PEXERR 0 +#define V_PEXERR(x) ((x) << S_PEXERR) +#define F_PEXERR V_PEXERR(1U) + +#define A_PCIE_INT_CAUSE 0x84 + +#define A_PCIE_CFG 0x88 + +#define S_PCIE_CLIDECEN 16 +#define V_PCIE_CLIDECEN(x) ((x) << S_PCIE_CLIDECEN) +#define F_PCIE_CLIDECEN V_PCIE_CLIDECEN(1U) + +#define S_CRSTWRMMODE 0 +#define V_CRSTWRMMODE(x) ((x) << S_CRSTWRMMODE) +#define F_CRSTWRMMODE V_CRSTWRMMODE(1U) + +#define A_PCIE_MODE 0x8c + +#define S_NUMFSTTRNSEQRX 10 +#define M_NUMFSTTRNSEQRX 0xff +#define V_NUMFSTTRNSEQRX(x) ((x) << S_NUMFSTTRNSEQRX) +#define G_NUMFSTTRNSEQRX(x) (((x) >> S_NUMFSTTRNSEQRX) & M_NUMFSTTRNSEQRX) + +#define A_PCIE_PEX_CTRL0 0x98 + +#define S_NUMFSTTRNSEQ 22 +#define M_NUMFSTTRNSEQ 0xff +#define V_NUMFSTTRNSEQ(x) ((x) << S_NUMFSTTRNSEQ) +#define G_NUMFSTTRNSEQ(x) (((x) >> S_NUMFSTTRNSEQ) & M_NUMFSTTRNSEQ) + +#define S_REPLAYLMT 2 +#define M_REPLAYLMT 0xfffff + +#define V_REPLAYLMT(x) ((x) << S_REPLAYLMT) + +#define A_PCIE_PEX_CTRL1 0x9c + +#define S_T3A_ACKLAT 0 +#define M_T3A_ACKLAT 0x7ff + +#define V_T3A_ACKLAT(x) ((x) << S_T3A_ACKLAT) + +#define S_ACKLAT 0 +#define M_ACKLAT 0x1fff + +#define V_ACKLAT(x) ((x) << S_ACKLAT) + +#define A_PCIE_PEX_ERR 0xa4 + +#define A_T3DBG_GPIO_EN 0xd0 + +#define S_GPIO11_OEN 27 +#define V_GPIO11_OEN(x) ((x) << S_GPIO11_OEN) +#define F_GPIO11_OEN V_GPIO11_OEN(1U) + +#define S_GPIO10_OEN 26 +#define V_GPIO10_OEN(x) ((x) << S_GPIO10_OEN) +#define F_GPIO10_OEN V_GPIO10_OEN(1U) + +#define S_GPIO7_OEN 23 +#define V_GPIO7_OEN(x) ((x) << S_GPIO7_OEN) +#define F_GPIO7_OEN V_GPIO7_OEN(1U) + +#define S_GPIO6_OEN 22 +#define V_GPIO6_OEN(x) ((x) << S_GPIO6_OEN) +#define F_GPIO6_OEN V_GPIO6_OEN(1U) + +#define S_GPIO5_OEN 21 +#define V_GPIO5_OEN(x) ((x) << S_GPIO5_OEN) +#define F_GPIO5_OEN V_GPIO5_OEN(1U) + +#define S_GPIO4_OEN 20 +#define V_GPIO4_OEN(x) ((x) << S_GPIO4_OEN) +#define F_GPIO4_OEN V_GPIO4_OEN(1U) + +#define S_GPIO2_OEN 18 +#define V_GPIO2_OEN(x) ((x) << S_GPIO2_OEN) +#define F_GPIO2_OEN V_GPIO2_OEN(1U) + +#define S_GPIO1_OEN 17 +#define V_GPIO1_OEN(x) ((x) << S_GPIO1_OEN) +#define F_GPIO1_OEN V_GPIO1_OEN(1U) + +#define S_GPIO0_OEN 16 +#define V_GPIO0_OEN(x) ((x) << S_GPIO0_OEN) +#define F_GPIO0_OEN V_GPIO0_OEN(1U) + +#define S_GPIO10_OUT_VAL 10 +#define V_GPIO10_OUT_VAL(x) ((x) << S_GPIO10_OUT_VAL) +#define F_GPIO10_OUT_VAL V_GPIO10_OUT_VAL(1U) + +#define S_GPIO7_OUT_VAL 7 +#define V_GPIO7_OUT_VAL(x) ((x) << S_GPIO7_OUT_VAL) +#define F_GPIO7_OUT_VAL V_GPIO7_OUT_VAL(1U) + +#define S_GPIO6_OUT_VAL 6 +#define V_GPIO6_OUT_VAL(x) ((x) << S_GPIO6_OUT_VAL) +#define F_GPIO6_OUT_VAL V_GPIO6_OUT_VAL(1U) + +#define S_GPIO5_OUT_VAL 5 +#define V_GPIO5_OUT_VAL(x) ((x) << S_GPIO5_OUT_VAL) +#define F_GPIO5_OUT_VAL V_GPIO5_OUT_VAL(1U) + +#define S_GPIO4_OUT_VAL 4 +#define V_GPIO4_OUT_VAL(x) ((x) << S_GPIO4_OUT_VAL) +#define F_GPIO4_OUT_VAL V_GPIO4_OUT_VAL(1U) + +#define S_GPIO2_OUT_VAL 2 +#define V_GPIO2_OUT_VAL(x) ((x) << S_GPIO2_OUT_VAL) +#define F_GPIO2_OUT_VAL V_GPIO2_OUT_VAL(1U) + +#define S_GPIO1_OUT_VAL 1 +#define V_GPIO1_OUT_VAL(x) ((x) << S_GPIO1_OUT_VAL) +#define F_GPIO1_OUT_VAL V_GPIO1_OUT_VAL(1U) + +#define S_GPIO0_OUT_VAL 0 +#define V_GPIO0_OUT_VAL(x) ((x) << S_GPIO0_OUT_VAL) +#define F_GPIO0_OUT_VAL V_GPIO0_OUT_VAL(1U) + +#define A_T3DBG_INT_ENABLE 0xd8 + +#define S_GPIO11 11 +#define V_GPIO11(x) ((x) << S_GPIO11) +#define F_GPIO11 V_GPIO11(1U) + +#define S_GPIO10 10 +#define V_GPIO10(x) ((x) << S_GPIO10) +#define F_GPIO10 V_GPIO10(1U) + +#define S_GPIO7 7 +#define V_GPIO7(x) ((x) << S_GPIO7) +#define F_GPIO7 V_GPIO7(1U) + +#define S_GPIO6 6 +#define V_GPIO6(x) ((x) << S_GPIO6) +#define F_GPIO6 V_GPIO6(1U) + +#define S_GPIO5 5 +#define V_GPIO5(x) ((x) << S_GPIO5) +#define F_GPIO5 V_GPIO5(1U) + +#define S_GPIO4 4 +#define V_GPIO4(x) ((x) << S_GPIO4) +#define F_GPIO4 V_GPIO4(1U) + +#define S_GPIO3 3 +#define V_GPIO3(x) ((x) << S_GPIO3) +#define F_GPIO3 V_GPIO3(1U) + +#define S_GPIO2 2 +#define V_GPIO2(x) ((x) << S_GPIO2) +#define F_GPIO2 V_GPIO2(1U) + +#define S_GPIO1 1 +#define V_GPIO1(x) ((x) << S_GPIO1) +#define F_GPIO1 V_GPIO1(1U) + +#define S_GPIO0 0 +#define V_GPIO0(x) ((x) << S_GPIO0) +#define F_GPIO0 V_GPIO0(1U) + +#define A_T3DBG_INT_CAUSE 0xdc + +#define A_T3DBG_GPIO_ACT_LOW 0xf0 + +#define MC7_PMRX_BASE_ADDR 0x100 + +#define A_MC7_CFG 0x100 + +#define S_IFEN 13 +#define V_IFEN(x) ((x) << S_IFEN) +#define F_IFEN V_IFEN(1U) + +#define S_TERM150 11 +#define V_TERM150(x) ((x) << S_TERM150) +#define F_TERM150 V_TERM150(1U) + +#define S_SLOW 10 +#define V_SLOW(x) ((x) << S_SLOW) +#define F_SLOW V_SLOW(1U) + +#define S_WIDTH 8 +#define M_WIDTH 0x3 +#define V_WIDTH(x) ((x) << S_WIDTH) +#define G_WIDTH(x) (((x) >> S_WIDTH) & M_WIDTH) + +#define S_BKS 6 +#define V_BKS(x) ((x) << S_BKS) +#define F_BKS V_BKS(1U) + +#define S_ORG 5 +#define V_ORG(x) ((x) << S_ORG) +#define F_ORG V_ORG(1U) + +#define S_DEN 2 +#define M_DEN 0x7 +#define V_DEN(x) ((x) << S_DEN) +#define G_DEN(x) (((x) >> S_DEN) & M_DEN) + +#define S_RDY 1 +#define V_RDY(x) ((x) << S_RDY) +#define F_RDY V_RDY(1U) + +#define S_CLKEN 0 +#define V_CLKEN(x) ((x) << S_CLKEN) +#define F_CLKEN V_CLKEN(1U) + +#define A_MC7_MODE 0x104 + +#define S_BUSY 31 +#define V_BUSY(x) ((x) << S_BUSY) +#define F_BUSY V_BUSY(1U) + +#define S_BUSY 31 +#define V_BUSY(x) ((x) << S_BUSY) +#define F_BUSY V_BUSY(1U) + +#define A_MC7_EXT_MODE1 0x108 + +#define A_MC7_EXT_MODE2 0x10c + +#define A_MC7_EXT_MODE3 0x110 + +#define A_MC7_PRE 0x114 + +#define A_MC7_REF 0x118 + +#define S_PREREFDIV 1 +#define M_PREREFDIV 0x3fff +#define V_PREREFDIV(x) ((x) << S_PREREFDIV) + +#define S_PERREFEN 0 +#define V_PERREFEN(x) ((x) << S_PERREFEN) +#define F_PERREFEN V_PERREFEN(1U) + +#define A_MC7_DLL 0x11c + +#define S_DLLENB 1 +#define V_DLLENB(x) ((x) << S_DLLENB) +#define F_DLLENB V_DLLENB(1U) + +#define S_DLLRST 0 +#define V_DLLRST(x) ((x) << S_DLLRST) +#define F_DLLRST V_DLLRST(1U) + +#define A_MC7_PARM 0x120 + +#define S_ACTTOPREDLY 26 +#define M_ACTTOPREDLY 0xf +#define V_ACTTOPREDLY(x) ((x) << S_ACTTOPREDLY) + +#define S_ACTTORDWRDLY 23 +#define M_ACTTORDWRDLY 0x7 +#define V_ACTTORDWRDLY(x) ((x) << S_ACTTORDWRDLY) + +#define S_PRECYC 20 +#define M_PRECYC 0x7 +#define V_PRECYC(x) ((x) << S_PRECYC) + +#define S_REFCYC 13 +#define M_REFCYC 0x7f +#define V_REFCYC(x) ((x) << S_REFCYC) + +#define S_BKCYC 8 +#define M_BKCYC 0x1f +#define V_BKCYC(x) ((x) << S_BKCYC) + +#define S_WRTORDDLY 4 +#define M_WRTORDDLY 0xf +#define V_WRTORDDLY(x) ((x) << S_WRTORDDLY) + +#define S_RDTOWRDLY 0 +#define M_RDTOWRDLY 0xf +#define V_RDTOWRDLY(x) ((x) << S_RDTOWRDLY) + +#define A_MC7_CAL 0x128 + +#define S_BUSY 31 +#define V_BUSY(x) ((x) << S_BUSY) +#define F_BUSY V_BUSY(1U) + +#define S_BUSY 31 +#define V_BUSY(x) ((x) << S_BUSY) +#define F_BUSY V_BUSY(1U) + +#define S_CAL_FAULT 30 +#define V_CAL_FAULT(x) ((x) << S_CAL_FAULT) +#define F_CAL_FAULT V_CAL_FAULT(1U) + +#define S_SGL_CAL_EN 20 +#define V_SGL_CAL_EN(x) ((x) << S_SGL_CAL_EN) +#define F_SGL_CAL_EN V_SGL_CAL_EN(1U) + +#define A_MC7_ERR_ADDR 0x12c + +#define A_MC7_ECC 0x130 + +#define S_ECCCHKEN 1 +#define V_ECCCHKEN(x) ((x) << S_ECCCHKEN) +#define F_ECCCHKEN V_ECCCHKEN(1U) + +#define S_ECCGENEN 0 +#define V_ECCGENEN(x) ((x) << S_ECCGENEN) +#define F_ECCGENEN V_ECCGENEN(1U) + +#define A_MC7_CE_ADDR 0x134 + +#define A_MC7_CE_DATA0 0x138 + +#define A_MC7_CE_DATA1 0x13c + +#define A_MC7_CE_DATA2 0x140 + +#define S_DATA 0 +#define M_DATA 0xff + +#define G_DATA(x) (((x) >> S_DATA) & M_DATA) + +#define A_MC7_UE_ADDR 0x144 + +#define A_MC7_UE_DATA0 0x148 + +#define A_MC7_UE_DATA1 0x14c + +#define A_MC7_UE_DATA2 0x150 + +#define A_MC7_BD_ADDR 0x154 + +#define S_ADDR 3 + +#define M_ADDR 0x1fffffff + +#define A_MC7_BD_DATA0 0x158 + +#define A_MC7_BD_DATA1 0x15c + +#define A_MC7_BD_OP 0x164 + +#define S_OP 0 + +#define V_OP(x) ((x) << S_OP) +#define F_OP V_OP(1U) + +#define F_OP V_OP(1U) +#define A_SF_OP 0x6dc + +#define A_MC7_BIST_ADDR_BEG 0x168 + +#define A_MC7_BIST_ADDR_END 0x16c + +#define A_MC7_BIST_DATA 0x170 + +#define A_MC7_BIST_OP 0x174 + +#define S_CONT 3 +#define V_CONT(x) ((x) << S_CONT) +#define F_CONT V_CONT(1U) + +#define F_CONT V_CONT(1U) + +#define A_MC7_INT_ENABLE 0x178 + +#define S_AE 17 +#define V_AE(x) ((x) << S_AE) +#define F_AE V_AE(1U) + +#define S_PE 2 +#define M_PE 0x7fff + +#define V_PE(x) ((x) << S_PE) + +#define G_PE(x) (((x) >> S_PE) & M_PE) + +#define S_UE 1 +#define V_UE(x) ((x) << S_UE) +#define F_UE V_UE(1U) + +#define S_CE 0 +#define V_CE(x) ((x) << S_CE) +#define F_CE V_CE(1U) + +#define A_MC7_INT_CAUSE 0x17c + +#define MC7_PMTX_BASE_ADDR 0x180 + +#define MC7_CM_BASE_ADDR 0x200 + +#define A_CIM_BOOT_CFG 0x280 + +#define S_BOOTADDR 2 +#define M_BOOTADDR 0x3fffffff +#define V_BOOTADDR(x) ((x) << S_BOOTADDR) + +#define A_CIM_SDRAM_BASE_ADDR 0x28c + +#define A_CIM_SDRAM_ADDR_SIZE 0x290 + +#define A_CIM_HOST_INT_ENABLE 0x298 + +#define A_CIM_HOST_INT_CAUSE 0x29c + +#define S_BLKWRPLINT 12 +#define V_BLKWRPLINT(x) ((x) << S_BLKWRPLINT) +#define F_BLKWRPLINT V_BLKWRPLINT(1U) + +#define S_BLKRDPLINT 11 +#define V_BLKRDPLINT(x) ((x) << S_BLKRDPLINT) +#define F_BLKRDPLINT V_BLKRDPLINT(1U) + +#define S_BLKWRCTLINT 10 +#define V_BLKWRCTLINT(x) ((x) << S_BLKWRCTLINT) +#define F_BLKWRCTLINT V_BLKWRCTLINT(1U) + +#define S_BLKRDCTLINT 9 +#define V_BLKRDCTLINT(x) ((x) << S_BLKRDCTLINT) +#define F_BLKRDCTLINT V_BLKRDCTLINT(1U) + +#define S_BLKWRFLASHINT 8 +#define V_BLKWRFLASHINT(x) ((x) << S_BLKWRFLASHINT) +#define F_BLKWRFLASHINT V_BLKWRFLASHINT(1U) + +#define S_BLKRDFLASHINT 7 +#define V_BLKRDFLASHINT(x) ((x) << S_BLKRDFLASHINT) +#define F_BLKRDFLASHINT V_BLKRDFLASHINT(1U) + +#define S_SGLWRFLASHINT 6 +#define V_SGLWRFLASHINT(x) ((x) << S_SGLWRFLASHINT) +#define F_SGLWRFLASHINT V_SGLWRFLASHINT(1U) + +#define S_WRBLKFLASHINT 5 +#define V_WRBLKFLASHINT(x) ((x) << S_WRBLKFLASHINT) +#define F_WRBLKFLASHINT V_WRBLKFLASHINT(1U) + +#define S_BLKWRBOOTINT 4 +#define V_BLKWRBOOTINT(x) ((x) << S_BLKWRBOOTINT) +#define F_BLKWRBOOTINT V_BLKWRBOOTINT(1U) + +#define S_FLASHRANGEINT 2 +#define V_FLASHRANGEINT(x) ((x) << S_FLASHRANGEINT) +#define F_FLASHRANGEINT V_FLASHRANGEINT(1U) + +#define S_SDRAMRANGEINT 1 +#define V_SDRAMRANGEINT(x) ((x) << S_SDRAMRANGEINT) +#define F_SDRAMRANGEINT V_SDRAMRANGEINT(1U) + +#define S_RSVDSPACEINT 0 +#define V_RSVDSPACEINT(x) ((x) << S_RSVDSPACEINT) +#define F_RSVDSPACEINT V_RSVDSPACEINT(1U) + +#define A_CIM_HOST_ACC_CTRL 0x2b0 + +#define S_HOSTBUSY 17 +#define V_HOSTBUSY(x) ((x) << S_HOSTBUSY) +#define F_HOSTBUSY V_HOSTBUSY(1U) + +#define A_CIM_HOST_ACC_DATA 0x2b4 + +#define A_TP_IN_CONFIG 0x300 + +#define S_NICMODE 14 +#define V_NICMODE(x) ((x) << S_NICMODE) +#define F_NICMODE V_NICMODE(1U) + +#define F_NICMODE V_NICMODE(1U) + +#define S_IPV6ENABLE 15 +#define V_IPV6ENABLE(x) ((x) << S_IPV6ENABLE) +#define F_IPV6ENABLE V_IPV6ENABLE(1U) + +#define A_TP_OUT_CONFIG 0x304 + +#define S_VLANEXTRACTIONENABLE 12 + +#define A_TP_GLOBAL_CONFIG 0x308 + +#define S_TXPACINGENABLE 24 +#define V_TXPACINGENABLE(x) ((x) << S_TXPACINGENABLE) +#define F_TXPACINGENABLE V_TXPACINGENABLE(1U) + +#define S_PATHMTU 15 +#define V_PATHMTU(x) ((x) << S_PATHMTU) +#define F_PATHMTU V_PATHMTU(1U) + +#define S_IPCHECKSUMOFFLOAD 13 +#define V_IPCHECKSUMOFFLOAD(x) ((x) << S_IPCHECKSUMOFFLOAD) +#define F_IPCHECKSUMOFFLOAD V_IPCHECKSUMOFFLOAD(1U) + +#define S_UDPCHECKSUMOFFLOAD 12 +#define V_UDPCHECKSUMOFFLOAD(x) ((x) << S_UDPCHECKSUMOFFLOAD) +#define F_UDPCHECKSUMOFFLOAD V_UDPCHECKSUMOFFLOAD(1U) + +#define S_TCPCHECKSUMOFFLOAD 11 +#define V_TCPCHECKSUMOFFLOAD(x) ((x) << S_TCPCHECKSUMOFFLOAD) +#define F_TCPCHECKSUMOFFLOAD V_TCPCHECKSUMOFFLOAD(1U) + +#define S_IPTTL 0 +#define M_IPTTL 0xff +#define V_IPTTL(x) ((x) << S_IPTTL) + +#define A_TP_CMM_MM_BASE 0x314 + +#define A_TP_CMM_TIMER_BASE 0x318 + +#define S_CMTIMERMAXNUM 28 +#define M_CMTIMERMAXNUM 0x3 +#define V_CMTIMERMAXNUM(x) ((x) << S_CMTIMERMAXNUM) + +#define A_TP_PMM_SIZE 0x31c + +#define A_TP_PMM_TX_BASE 0x320 + +#define A_TP_PMM_RX_BASE 0x328 + +#define A_TP_PMM_RX_PAGE_SIZE 0x32c + +#define A_TP_PMM_RX_MAX_PAGE 0x330 + +#define A_TP_PMM_TX_PAGE_SIZE 0x334 + +#define A_TP_PMM_TX_MAX_PAGE 0x338 + +#define A_TP_TCP_OPTIONS 0x340 + +#define S_MTUDEFAULT 16 +#define M_MTUDEFAULT 0xffff +#define V_MTUDEFAULT(x) ((x) << S_MTUDEFAULT) + +#define S_MTUENABLE 10 +#define V_MTUENABLE(x) ((x) << S_MTUENABLE) +#define F_MTUENABLE V_MTUENABLE(1U) + +#define S_SACKRX 8 +#define V_SACKRX(x) ((x) << S_SACKRX) +#define F_SACKRX V_SACKRX(1U) + +#define S_SACKMODE 4 + +#define M_SACKMODE 0x3 + +#define V_SACKMODE(x) ((x) << S_SACKMODE) + +#define S_WINDOWSCALEMODE 2 +#define M_WINDOWSCALEMODE 0x3 +#define V_WINDOWSCALEMODE(x) ((x) << S_WINDOWSCALEMODE) + +#define S_TIMESTAMPSMODE 0 + +#define M_TIMESTAMPSMODE 0x3 + +#define V_TIMESTAMPSMODE(x) ((x) << S_TIMESTAMPSMODE) + +#define A_TP_DACK_CONFIG 0x344 + +#define S_AUTOSTATE3 30 +#define M_AUTOSTATE3 0x3 +#define V_AUTOSTATE3(x) ((x) << S_AUTOSTATE3) + +#define S_AUTOSTATE2 28 +#define M_AUTOSTATE2 0x3 +#define V_AUTOSTATE2(x) ((x) << S_AUTOSTATE2) + +#define S_AUTOSTATE1 26 +#define M_AUTOSTATE1 0x3 +#define V_AUTOSTATE1(x) ((x) << S_AUTOSTATE1) + +#define S_BYTETHRESHOLD 5 +#define M_BYTETHRESHOLD 0xfffff +#define V_BYTETHRESHOLD(x) ((x) << S_BYTETHRESHOLD) + +#define S_MSSTHRESHOLD 3 +#define M_MSSTHRESHOLD 0x3 +#define V_MSSTHRESHOLD(x) ((x) << S_MSSTHRESHOLD) + +#define S_AUTOCAREFUL 2 +#define V_AUTOCAREFUL(x) ((x) << S_AUTOCAREFUL) +#define F_AUTOCAREFUL V_AUTOCAREFUL(1U) + +#define S_AUTOENABLE 1 +#define V_AUTOENABLE(x) ((x) << S_AUTOENABLE) +#define F_AUTOENABLE V_AUTOENABLE(1U) + +#define S_DACK_MODE 0 +#define V_DACK_MODE(x) ((x) << S_DACK_MODE) +#define F_DACK_MODE V_DACK_MODE(1U) + +#define A_TP_PC_CONFIG 0x348 + +#define S_TXTOSQUEUEMAPMODE 26 +#define V_TXTOSQUEUEMAPMODE(x) ((x) << S_TXTOSQUEUEMAPMODE) +#define F_TXTOSQUEUEMAPMODE V_TXTOSQUEUEMAPMODE(1U) + +#define S_ENABLEEPCMDAFULL 23 +#define V_ENABLEEPCMDAFULL(x) ((x) << S_ENABLEEPCMDAFULL) +#define F_ENABLEEPCMDAFULL V_ENABLEEPCMDAFULL(1U) + +#define S_MODULATEUNIONMODE 22 +#define V_MODULATEUNIONMODE(x) ((x) << S_MODULATEUNIONMODE) +#define F_MODULATEUNIONMODE V_MODULATEUNIONMODE(1U) + +#define S_TXDEFERENABLE 20 +#define V_TXDEFERENABLE(x) ((x) << S_TXDEFERENABLE) +#define F_TXDEFERENABLE V_TXDEFERENABLE(1U) + +#define S_RXCONGESTIONMODE 19 +#define V_RXCONGESTIONMODE(x) ((x) << S_RXCONGESTIONMODE) +#define F_RXCONGESTIONMODE V_RXCONGESTIONMODE(1U) + +#define S_HEARBEATDACK 16 +#define V_HEARBEATDACK(x) ((x) << S_HEARBEATDACK) +#define F_HEARBEATDACK V_HEARBEATDACK(1U) + +#define S_TXCONGESTIONMODE 15 +#define V_TXCONGESTIONMODE(x) ((x) << S_TXCONGESTIONMODE) +#define F_TXCONGESTIONMODE V_TXCONGESTIONMODE(1U) + +#define S_ENABLEOCSPIFULL 30 +#define V_ENABLEOCSPIFULL(x) ((x) << S_ENABLEOCSPIFULL) +#define F_ENABLEOCSPIFULL V_ENABLEOCSPIFULL(1U) + +#define S_LOCKTID 28 +#define V_LOCKTID(x) ((x) << S_LOCKTID) +#define F_LOCKTID V_LOCKTID(1U) + +#define A_TP_PC_CONFIG2 0x34c + +#define S_CHDRAFULL 4 +#define V_CHDRAFULL(x) ((x) << S_CHDRAFULL) +#define F_CHDRAFULL V_CHDRAFULL(1U) + +#define A_TP_TCP_BACKOFF_REG0 0x350 + +#define A_TP_TCP_BACKOFF_REG1 0x354 + +#define A_TP_TCP_BACKOFF_REG2 0x358 + +#define A_TP_TCP_BACKOFF_REG3 0x35c + +#define A_TP_PARA_REG2 0x368 + +#define S_MAXRXDATA 16 +#define M_MAXRXDATA 0xffff +#define V_MAXRXDATA(x) ((x) << S_MAXRXDATA) + +#define S_RXCOALESCESIZE 0 +#define M_RXCOALESCESIZE 0xffff +#define V_RXCOALESCESIZE(x) ((x) << S_RXCOALESCESIZE) + +#define A_TP_PARA_REG3 0x36c + +#define S_TXDATAACKIDX 16 +#define M_TXDATAACKIDX 0xf + +#define V_TXDATAACKIDX(x) ((x) << S_TXDATAACKIDX) + +#define S_TXPACEAUTOSTRICT 10 +#define V_TXPACEAUTOSTRICT(x) ((x) << S_TXPACEAUTOSTRICT) +#define F_TXPACEAUTOSTRICT V_TXPACEAUTOSTRICT(1U) + +#define S_TXPACEFIXED 9 +#define V_TXPACEFIXED(x) ((x) << S_TXPACEFIXED) +#define F_TXPACEFIXED V_TXPACEFIXED(1U) + +#define S_TXPACEAUTO 8 +#define V_TXPACEAUTO(x) ((x) << S_TXPACEAUTO) +#define F_TXPACEAUTO V_TXPACEAUTO(1U) + +#define S_RXCOALESCEENABLE 1 +#define V_RXCOALESCEENABLE(x) ((x) << S_RXCOALESCEENABLE) +#define F_RXCOALESCEENABLE V_RXCOALESCEENABLE(1U) + +#define S_RXCOALESCEPSHEN 0 +#define V_RXCOALESCEPSHEN(x) ((x) << S_RXCOALESCEPSHEN) +#define F_RXCOALESCEPSHEN V_RXCOALESCEPSHEN(1U) + +#define A_TP_PARA_REG4 0x370 + +#define A_TP_PARA_REG6 0x378 + +#define S_T3A_ENABLEESND 13 +#define V_T3A_ENABLEESND(x) ((x) << S_T3A_ENABLEESND) +#define F_T3A_ENABLEESND V_T3A_ENABLEESND(1U) + +#define S_ENABLEESND 11 +#define V_ENABLEESND(x) ((x) << S_ENABLEESND) +#define F_ENABLEESND V_ENABLEESND(1U) + +#define A_TP_PARA_REG7 0x37c + +#define S_PMMAXXFERLEN1 16 +#define M_PMMAXXFERLEN1 0xffff +#define V_PMMAXXFERLEN1(x) ((x) << S_PMMAXXFERLEN1) + +#define S_PMMAXXFERLEN0 0 +#define M_PMMAXXFERLEN0 0xffff +#define V_PMMAXXFERLEN0(x) ((x) << S_PMMAXXFERLEN0) + +#define A_TP_TIMER_RESOLUTION 0x390 + +#define S_TIMERRESOLUTION 16 +#define M_TIMERRESOLUTION 0xff +#define V_TIMERRESOLUTION(x) ((x) << S_TIMERRESOLUTION) + +#define S_TIMESTAMPRESOLUTION 8 +#define M_TIMESTAMPRESOLUTION 0xff +#define V_TIMESTAMPRESOLUTION(x) ((x) << S_TIMESTAMPRESOLUTION) + +#define S_DELAYEDACKRESOLUTION 0 +#define M_DELAYEDACKRESOLUTION 0xff +#define V_DELAYEDACKRESOLUTION(x) ((x) << S_DELAYEDACKRESOLUTION) + +#define A_TP_MSL 0x394 + +#define A_TP_RXT_MIN 0x398 + +#define A_TP_RXT_MAX 0x39c + +#define A_TP_PERS_MIN 0x3a0 + +#define A_TP_PERS_MAX 0x3a4 + +#define A_TP_KEEP_IDLE 0x3a8 + +#define A_TP_KEEP_INTVL 0x3ac + +#define A_TP_INIT_SRTT 0x3b0 + +#define A_TP_DACK_TIMER 0x3b4 + +#define A_TP_FINWAIT2_TIMER 0x3b8 + +#define A_TP_SHIFT_CNT 0x3c0 + +#define S_SYNSHIFTMAX 24 + +#define M_SYNSHIFTMAX 0xff + +#define V_SYNSHIFTMAX(x) ((x) << S_SYNSHIFTMAX) + +#define S_RXTSHIFTMAXR1 20 + +#define M_RXTSHIFTMAXR1 0xf + +#define V_RXTSHIFTMAXR1(x) ((x) << S_RXTSHIFTMAXR1) + +#define S_RXTSHIFTMAXR2 16 + +#define M_RXTSHIFTMAXR2 0xf + +#define V_RXTSHIFTMAXR2(x) ((x) << S_RXTSHIFTMAXR2) + +#define S_PERSHIFTBACKOFFMAX 12 +#define M_PERSHIFTBACKOFFMAX 0xf +#define V_PERSHIFTBACKOFFMAX(x) ((x) << S_PERSHIFTBACKOFFMAX) + +#define S_PERSHIFTMAX 8 +#define M_PERSHIFTMAX 0xf +#define V_PERSHIFTMAX(x) ((x) << S_PERSHIFTMAX) + +#define S_KEEPALIVEMAX 0 + +#define M_KEEPALIVEMAX 0xff + +#define V_KEEPALIVEMAX(x) ((x) << S_KEEPALIVEMAX) + +#define A_TP_MTU_PORT_TABLE 0x3d0 + +#define A_TP_CCTRL_TABLE 0x3dc + +#define A_TP_MTU_TABLE 0x3e4 + +#define A_TP_RSS_MAP_TABLE 0x3e8 + +#define A_TP_RSS_LKP_TABLE 0x3ec + +#define A_TP_RSS_CONFIG 0x3f0 + +#define S_TNL4TUPEN 29 +#define V_TNL4TUPEN(x) ((x) << S_TNL4TUPEN) +#define F_TNL4TUPEN V_TNL4TUPEN(1U) + +#define S_TNL2TUPEN 28 +#define V_TNL2TUPEN(x) ((x) << S_TNL2TUPEN) +#define F_TNL2TUPEN V_TNL2TUPEN(1U) + +#define S_TNLPRTEN 26 +#define V_TNLPRTEN(x) ((x) << S_TNLPRTEN) +#define F_TNLPRTEN V_TNLPRTEN(1U) + +#define S_TNLMAPEN 25 +#define V_TNLMAPEN(x) ((x) << S_TNLMAPEN) +#define F_TNLMAPEN V_TNLMAPEN(1U) + +#define S_TNLLKPEN 24 +#define V_TNLLKPEN(x) ((x) << S_TNLLKPEN) +#define F_TNLLKPEN V_TNLLKPEN(1U) + +#define S_RRCPLCPUSIZE 4 +#define M_RRCPLCPUSIZE 0x7 +#define V_RRCPLCPUSIZE(x) ((x) << S_RRCPLCPUSIZE) + +#define S_RQFEEDBACKENABLE 3 +#define V_RQFEEDBACKENABLE(x) ((x) << S_RQFEEDBACKENABLE) +#define F_RQFEEDBACKENABLE V_RQFEEDBACKENABLE(1U) + +#define S_DISABLE 0 + +#define A_TP_TM_PIO_ADDR 0x418 + +#define A_TP_TM_PIO_DATA 0x41c + +#define A_TP_TX_MOD_QUE_TABLE 0x420 + +#define A_TP_TX_RESOURCE_LIMIT 0x424 + +#define A_TP_TX_MOD_QUEUE_REQ_MAP 0x428 + +#define S_TX_MOD_QUEUE_REQ_MAP 0 +#define M_TX_MOD_QUEUE_REQ_MAP 0xff +#define V_TX_MOD_QUEUE_REQ_MAP(x) ((x) << S_TX_MOD_QUEUE_REQ_MAP) + +#define A_TP_TX_MOD_QUEUE_WEIGHT1 0x42c + +#define A_TP_TX_MOD_QUEUE_WEIGHT0 0x430 + +#define A_TP_MOD_CHANNEL_WEIGHT 0x434 + +#define A_TP_PIO_ADDR 0x440 + +#define A_TP_PIO_DATA 0x444 + +#define A_TP_RESET 0x44c + +#define S_FLSTINITENABLE 1 +#define V_FLSTINITENABLE(x) ((x) << S_FLSTINITENABLE) +#define F_FLSTINITENABLE V_FLSTINITENABLE(1U) + +#define S_TPRESET 0 +#define V_TPRESET(x) ((x) << S_TPRESET) +#define F_TPRESET V_TPRESET(1U) + +#define A_TP_CMM_MM_RX_FLST_BASE 0x460 + +#define A_TP_CMM_MM_TX_FLST_BASE 0x464 + +#define A_TP_CMM_MM_PS_FLST_BASE 0x468 + +#define A_TP_MIB_INDEX 0x450 + +#define A_TP_MIB_RDATA 0x454 + +#define A_TP_CMM_MM_MAX_PSTRUCT 0x46c + +#define A_TP_INT_ENABLE 0x470 + +#define A_TP_INT_CAUSE 0x474 + +#define A_TP_TX_MOD_Q1_Q0_RATE_LIMIT 0x8 + +#define A_TP_TX_DROP_CFG_CH0 0x12b + +#define A_TP_TX_DROP_MODE 0x12f + +#define A_TP_EGRESS_CONFIG 0x145 + +#define S_REWRITEFORCETOSIZE 0 +#define V_REWRITEFORCETOSIZE(x) ((x) << S_REWRITEFORCETOSIZE) +#define F_REWRITEFORCETOSIZE V_REWRITEFORCETOSIZE(1U) + +#define A_TP_TX_TRC_KEY0 0x20 + +#define A_TP_RX_TRC_KEY0 0x120 + +#define A_ULPRX_CTL 0x500 + +#define S_ROUND_ROBIN 4 +#define V_ROUND_ROBIN(x) ((x) << S_ROUND_ROBIN) +#define F_ROUND_ROBIN V_ROUND_ROBIN(1U) + +#define A_ULPRX_INT_ENABLE 0x504 + +#define S_PARERR 0 +#define V_PARERR(x) ((x) << S_PARERR) +#define F_PARERR V_PARERR(1U) + +#define A_ULPRX_INT_CAUSE 0x508 + +#define A_ULPRX_ISCSI_LLIMIT 0x50c + +#define A_ULPRX_ISCSI_ULIMIT 0x510 + +#define A_ULPRX_ISCSI_TAGMASK 0x514 + +#define A_ULPRX_TDDP_LLIMIT 0x51c + +#define A_ULPRX_TDDP_ULIMIT 0x520 + +#define A_ULPRX_STAG_LLIMIT 0x52c + +#define A_ULPRX_STAG_ULIMIT 0x530 + +#define A_ULPRX_RQ_LLIMIT 0x534 +#define A_ULPRX_RQ_LLIMIT 0x534 + +#define A_ULPRX_RQ_ULIMIT 0x538 +#define A_ULPRX_RQ_ULIMIT 0x538 + +#define A_ULPRX_PBL_LLIMIT 0x53c + +#define A_ULPRX_PBL_ULIMIT 0x540 +#define A_ULPRX_PBL_ULIMIT 0x540 + +#define A_ULPRX_TDDP_TAGMASK 0x524 + +#define A_ULPRX_RQ_LLIMIT 0x534 +#define A_ULPRX_RQ_LLIMIT 0x534 + +#define A_ULPRX_RQ_ULIMIT 0x538 +#define A_ULPRX_RQ_ULIMIT 0x538 + +#define A_ULPRX_PBL_ULIMIT 0x540 +#define A_ULPRX_PBL_ULIMIT 0x540 + +#define A_ULPTX_CONFIG 0x580 + +#define S_CFG_RR_ARB 0 +#define V_CFG_RR_ARB(x) ((x) << S_CFG_RR_ARB) +#define F_CFG_RR_ARB V_CFG_RR_ARB(1U) + +#define A_ULPTX_INT_ENABLE 0x584 + +#define S_PBL_BOUND_ERR_CH1 1 +#define V_PBL_BOUND_ERR_CH1(x) ((x) << S_PBL_BOUND_ERR_CH1) +#define F_PBL_BOUND_ERR_CH1 V_PBL_BOUND_ERR_CH1(1U) + +#define S_PBL_BOUND_ERR_CH0 0 +#define V_PBL_BOUND_ERR_CH0(x) ((x) << S_PBL_BOUND_ERR_CH0) +#define F_PBL_BOUND_ERR_CH0 V_PBL_BOUND_ERR_CH0(1U) + +#define A_ULPTX_INT_CAUSE 0x588 + +#define A_ULPTX_TPT_LLIMIT 0x58c + +#define A_ULPTX_TPT_ULIMIT 0x590 + +#define A_ULPTX_PBL_LLIMIT 0x594 + +#define A_ULPTX_PBL_ULIMIT 0x598 + +#define A_ULPTX_DMA_WEIGHT 0x5ac + +#define S_D1_WEIGHT 16 +#define M_D1_WEIGHT 0xffff +#define V_D1_WEIGHT(x) ((x) << S_D1_WEIGHT) + +#define S_D0_WEIGHT 0 +#define M_D0_WEIGHT 0xffff +#define V_D0_WEIGHT(x) ((x) << S_D0_WEIGHT) + +#define A_PM1_RX_CFG 0x5c0 + +#define A_PM1_RX_INT_ENABLE 0x5d8 + +#define S_ZERO_E_CMD_ERROR 18 +#define V_ZERO_E_CMD_ERROR(x) ((x) << S_ZERO_E_CMD_ERROR) +#define F_ZERO_E_CMD_ERROR V_ZERO_E_CMD_ERROR(1U) + +#define S_IESPI0_FIFO2X_RX_FRAMING_ERROR 17 +#define V_IESPI0_FIFO2X_RX_FRAMING_ERROR(x) ((x) << S_IESPI0_FIFO2X_RX_FRAMING_ERROR) +#define F_IESPI0_FIFO2X_RX_FRAMING_ERROR V_IESPI0_FIFO2X_RX_FRAMING_ERROR(1U) + +#define S_IESPI1_FIFO2X_RX_FRAMING_ERROR 16 +#define V_IESPI1_FIFO2X_RX_FRAMING_ERROR(x) ((x) << S_IESPI1_FIFO2X_RX_FRAMING_ERROR) +#define F_IESPI1_FIFO2X_RX_FRAMING_ERROR V_IESPI1_FIFO2X_RX_FRAMING_ERROR(1U) + +#define S_IESPI0_RX_FRAMING_ERROR 15 +#define V_IESPI0_RX_FRAMING_ERROR(x) ((x) << S_IESPI0_RX_FRAMING_ERROR) +#define F_IESPI0_RX_FRAMING_ERROR V_IESPI0_RX_FRAMING_ERROR(1U) + +#define S_IESPI1_RX_FRAMING_ERROR 14 +#define V_IESPI1_RX_FRAMING_ERROR(x) ((x) << S_IESPI1_RX_FRAMING_ERROR) +#define F_IESPI1_RX_FRAMING_ERROR V_IESPI1_RX_FRAMING_ERROR(1U) + +#define S_IESPI0_TX_FRAMING_ERROR 13 +#define V_IESPI0_TX_FRAMING_ERROR(x) ((x) << S_IESPI0_TX_FRAMING_ERROR) +#define F_IESPI0_TX_FRAMING_ERROR V_IESPI0_TX_FRAMING_ERROR(1U) + +#define S_IESPI1_TX_FRAMING_ERROR 12 +#define V_IESPI1_TX_FRAMING_ERROR(x) ((x) << S_IESPI1_TX_FRAMING_ERROR) +#define F_IESPI1_TX_FRAMING_ERROR V_IESPI1_TX_FRAMING_ERROR(1U) + +#define S_OCSPI0_RX_FRAMING_ERROR 11 +#define V_OCSPI0_RX_FRAMING_ERROR(x) ((x) << S_OCSPI0_RX_FRAMING_ERROR) +#define F_OCSPI0_RX_FRAMING_ERROR V_OCSPI0_RX_FRAMING_ERROR(1U) + +#define S_OCSPI1_RX_FRAMING_ERROR 10 +#define V_OCSPI1_RX_FRAMING_ERROR(x) ((x) << S_OCSPI1_RX_FRAMING_ERROR) +#define F_OCSPI1_RX_FRAMING_ERROR V_OCSPI1_RX_FRAMING_ERROR(1U) + +#define S_OCSPI0_TX_FRAMING_ERROR 9 +#define V_OCSPI0_TX_FRAMING_ERROR(x) ((x) << S_OCSPI0_TX_FRAMING_ERROR) +#define F_OCSPI0_TX_FRAMING_ERROR V_OCSPI0_TX_FRAMING_ERROR(1U) + +#define S_OCSPI1_TX_FRAMING_ERROR 8 +#define V_OCSPI1_TX_FRAMING_ERROR(x) ((x) << S_OCSPI1_TX_FRAMING_ERROR) +#define F_OCSPI1_TX_FRAMING_ERROR V_OCSPI1_TX_FRAMING_ERROR(1U) + +#define S_OCSPI0_OFIFO2X_TX_FRAMING_ERROR 7 +#define V_OCSPI0_OFIFO2X_TX_FRAMING_ERROR(x) ((x) << S_OCSPI0_OFIFO2X_TX_FRAMING_ERROR) +#define F_OCSPI0_OFIFO2X_TX_FRAMING_ERROR V_OCSPI0_OFIFO2X_TX_FRAMING_ERROR(1U) + +#define S_OCSPI1_OFIFO2X_TX_FRAMING_ERROR 6 +#define V_OCSPI1_OFIFO2X_TX_FRAMING_ERROR(x) ((x) << S_OCSPI1_OFIFO2X_TX_FRAMING_ERROR) +#define F_OCSPI1_OFIFO2X_TX_FRAMING_ERROR V_OCSPI1_OFIFO2X_TX_FRAMING_ERROR(1U) + +#define S_IESPI_PAR_ERROR 3 +#define M_IESPI_PAR_ERROR 0x7 + +#define V_IESPI_PAR_ERROR(x) ((x) << S_IESPI_PAR_ERROR) + +#define S_OCSPI_PAR_ERROR 0 +#define M_OCSPI_PAR_ERROR 0x7 + +#define V_OCSPI_PAR_ERROR(x) ((x) << S_OCSPI_PAR_ERROR) + +#define A_PM1_RX_INT_CAUSE 0x5dc + +#define A_PM1_TX_CFG 0x5e0 + +#define A_PM1_TX_INT_ENABLE 0x5f8 + +#define S_ZERO_C_CMD_ERROR 18 +#define V_ZERO_C_CMD_ERROR(x) ((x) << S_ZERO_C_CMD_ERROR) +#define F_ZERO_C_CMD_ERROR V_ZERO_C_CMD_ERROR(1U) + +#define S_ICSPI0_FIFO2X_RX_FRAMING_ERROR 17 +#define V_ICSPI0_FIFO2X_RX_FRAMING_ERROR(x) ((x) << S_ICSPI0_FIFO2X_RX_FRAMING_ERROR) +#define F_ICSPI0_FIFO2X_RX_FRAMING_ERROR V_ICSPI0_FIFO2X_RX_FRAMING_ERROR(1U) + +#define S_ICSPI1_FIFO2X_RX_FRAMING_ERROR 16 +#define V_ICSPI1_FIFO2X_RX_FRAMING_ERROR(x) ((x) << S_ICSPI1_FIFO2X_RX_FRAMING_ERROR) +#define F_ICSPI1_FIFO2X_RX_FRAMING_ERROR V_ICSPI1_FIFO2X_RX_FRAMING_ERROR(1U) + +#define S_ICSPI0_RX_FRAMING_ERROR 15 +#define V_ICSPI0_RX_FRAMING_ERROR(x) ((x) << S_ICSPI0_RX_FRAMING_ERROR) +#define F_ICSPI0_RX_FRAMING_ERROR V_ICSPI0_RX_FRAMING_ERROR(1U) + +#define S_ICSPI1_RX_FRAMING_ERROR 14 +#define V_ICSPI1_RX_FRAMING_ERROR(x) ((x) << S_ICSPI1_RX_FRAMING_ERROR) +#define F_ICSPI1_RX_FRAMING_ERROR V_ICSPI1_RX_FRAMING_ERROR(1U) + +#define S_ICSPI0_TX_FRAMING_ERROR 13 +#define V_ICSPI0_TX_FRAMING_ERROR(x) ((x) << S_ICSPI0_TX_FRAMING_ERROR) +#define F_ICSPI0_TX_FRAMING_ERROR V_ICSPI0_TX_FRAMING_ERROR(1U) + +#define S_ICSPI1_TX_FRAMING_ERROR 12 +#define V_ICSPI1_TX_FRAMING_ERROR(x) ((x) << S_ICSPI1_TX_FRAMING_ERROR) +#define F_ICSPI1_TX_FRAMING_ERROR V_ICSPI1_TX_FRAMING_ERROR(1U) + +#define S_OESPI0_RX_FRAMING_ERROR 11 +#define V_OESPI0_RX_FRAMING_ERROR(x) ((x) << S_OESPI0_RX_FRAMING_ERROR) +#define F_OESPI0_RX_FRAMING_ERROR V_OESPI0_RX_FRAMING_ERROR(1U) + +#define S_OESPI1_RX_FRAMING_ERROR 10 +#define V_OESPI1_RX_FRAMING_ERROR(x) ((x) << S_OESPI1_RX_FRAMING_ERROR) +#define F_OESPI1_RX_FRAMING_ERROR V_OESPI1_RX_FRAMING_ERROR(1U) + +#define S_OESPI0_TX_FRAMING_ERROR 9 +#define V_OESPI0_TX_FRAMING_ERROR(x) ((x) << S_OESPI0_TX_FRAMING_ERROR) +#define F_OESPI0_TX_FRAMING_ERROR V_OESPI0_TX_FRAMING_ERROR(1U) + +#define S_OESPI1_TX_FRAMING_ERROR 8 +#define V_OESPI1_TX_FRAMING_ERROR(x) ((x) << S_OESPI1_TX_FRAMING_ERROR) +#define F_OESPI1_TX_FRAMING_ERROR V_OESPI1_TX_FRAMING_ERROR(1U) + +#define S_OESPI0_OFIFO2X_TX_FRAMING_ERROR 7 +#define V_OESPI0_OFIFO2X_TX_FRAMING_ERROR(x) ((x) << S_OESPI0_OFIFO2X_TX_FRAMING_ERROR) +#define F_OESPI0_OFIFO2X_TX_FRAMING_ERROR V_OESPI0_OFIFO2X_TX_FRAMING_ERROR(1U) + +#define S_OESPI1_OFIFO2X_TX_FRAMING_ERROR 6 +#define V_OESPI1_OFIFO2X_TX_FRAMING_ERROR(x) ((x) << S_OESPI1_OFIFO2X_TX_FRAMING_ERROR) +#define F_OESPI1_OFIFO2X_TX_FRAMING_ERROR V_OESPI1_OFIFO2X_TX_FRAMING_ERROR(1U) + +#define S_ICSPI_PAR_ERROR 3 +#define M_ICSPI_PAR_ERROR 0x7 + +#define V_ICSPI_PAR_ERROR(x) ((x) << S_ICSPI_PAR_ERROR) + +#define S_OESPI_PAR_ERROR 0 +#define M_OESPI_PAR_ERROR 0x7 + +#define V_OESPI_PAR_ERROR(x) ((x) << S_OESPI_PAR_ERROR) + +#define A_PM1_TX_INT_CAUSE 0x5fc + +#define A_MPS_CFG 0x600 + +#define S_TPRXPORTEN 4 +#define V_TPRXPORTEN(x) ((x) << S_TPRXPORTEN) +#define F_TPRXPORTEN V_TPRXPORTEN(1U) + +#define S_TPTXPORT1EN 3 +#define V_TPTXPORT1EN(x) ((x) << S_TPTXPORT1EN) +#define F_TPTXPORT1EN V_TPTXPORT1EN(1U) + +#define S_TPTXPORT0EN 2 +#define V_TPTXPORT0EN(x) ((x) << S_TPTXPORT0EN) +#define F_TPTXPORT0EN V_TPTXPORT0EN(1U) + +#define S_PORT1ACTIVE 1 +#define V_PORT1ACTIVE(x) ((x) << S_PORT1ACTIVE) +#define F_PORT1ACTIVE V_PORT1ACTIVE(1U) + +#define S_PORT0ACTIVE 0 +#define V_PORT0ACTIVE(x) ((x) << S_PORT0ACTIVE) +#define F_PORT0ACTIVE V_PORT0ACTIVE(1U) + +#define S_ENFORCEPKT 11 +#define V_ENFORCEPKT(x) ((x) << S_ENFORCEPKT) +#define F_ENFORCEPKT V_ENFORCEPKT(1U) + +#define A_MPS_INT_ENABLE 0x61c + +#define S_MCAPARERRENB 6 +#define M_MCAPARERRENB 0x7 + +#define V_MCAPARERRENB(x) ((x) << S_MCAPARERRENB) + +#define S_RXTPPARERRENB 4 +#define M_RXTPPARERRENB 0x3 + +#define V_RXTPPARERRENB(x) ((x) << S_RXTPPARERRENB) + +#define S_TX1TPPARERRENB 2 +#define M_TX1TPPARERRENB 0x3 + +#define V_TX1TPPARERRENB(x) ((x) << S_TX1TPPARERRENB) + +#define S_TX0TPPARERRENB 0 +#define M_TX0TPPARERRENB 0x3 + +#define V_TX0TPPARERRENB(x) ((x) << S_TX0TPPARERRENB) + +#define A_MPS_INT_CAUSE 0x620 + +#define S_MCAPARERR 6 +#define M_MCAPARERR 0x7 + +#define V_MCAPARERR(x) ((x) << S_MCAPARERR) + +#define S_RXTPPARERR 4 +#define M_RXTPPARERR 0x3 + +#define V_RXTPPARERR(x) ((x) << S_RXTPPARERR) + +#define S_TX1TPPARERR 2 +#define M_TX1TPPARERR 0x3 + +#define V_TX1TPPARERR(x) ((x) << S_TX1TPPARERR) + +#define S_TX0TPPARERR 0 +#define M_TX0TPPARERR 0x3 + +#define V_TX0TPPARERR(x) ((x) << S_TX0TPPARERR) + +#define A_CPL_SWITCH_CNTRL 0x640 + +#define A_CPL_INTR_ENABLE 0x650 + +#define S_CIM_OVFL_ERROR 4 +#define V_CIM_OVFL_ERROR(x) ((x) << S_CIM_OVFL_ERROR) +#define F_CIM_OVFL_ERROR V_CIM_OVFL_ERROR(1U) + +#define S_TP_FRAMING_ERROR 3 +#define V_TP_FRAMING_ERROR(x) ((x) << S_TP_FRAMING_ERROR) +#define F_TP_FRAMING_ERROR V_TP_FRAMING_ERROR(1U) + +#define S_SGE_FRAMING_ERROR 2 +#define V_SGE_FRAMING_ERROR(x) ((x) << S_SGE_FRAMING_ERROR) +#define F_SGE_FRAMING_ERROR V_SGE_FRAMING_ERROR(1U) + +#define S_CIM_FRAMING_ERROR 1 +#define V_CIM_FRAMING_ERROR(x) ((x) << S_CIM_FRAMING_ERROR) +#define F_CIM_FRAMING_ERROR V_CIM_FRAMING_ERROR(1U) + +#define S_ZERO_SWITCH_ERROR 0 +#define V_ZERO_SWITCH_ERROR(x) ((x) << S_ZERO_SWITCH_ERROR) +#define F_ZERO_SWITCH_ERROR V_ZERO_SWITCH_ERROR(1U) + +#define A_CPL_INTR_CAUSE 0x654 + +#define A_CPL_MAP_TBL_DATA 0x65c + +#define A_SMB_GLOBAL_TIME_CFG 0x660 + +#define A_I2C_CFG 0x6a0 + +#define S_I2C_CLKDIV 0 +#define M_I2C_CLKDIV 0xfff +#define V_I2C_CLKDIV(x) ((x) << S_I2C_CLKDIV) + +#define A_MI1_CFG 0x6b0 + +#define S_CLKDIV 5 +#define M_CLKDIV 0xff +#define V_CLKDIV(x) ((x) << S_CLKDIV) + +#define S_ST 3 + +#define M_ST 0x3 + +#define V_ST(x) ((x) << S_ST) + +#define G_ST(x) (((x) >> S_ST) & M_ST) + +#define S_PREEN 2 +#define V_PREEN(x) ((x) << S_PREEN) +#define F_PREEN V_PREEN(1U) + +#define S_MDIINV 1 +#define V_MDIINV(x) ((x) << S_MDIINV) +#define F_MDIINV V_MDIINV(1U) + +#define S_MDIEN 0 +#define V_MDIEN(x) ((x) << S_MDIEN) +#define F_MDIEN V_MDIEN(1U) + +#define A_MI1_ADDR 0x6b4 + +#define S_PHYADDR 5 +#define M_PHYADDR 0x1f +#define V_PHYADDR(x) ((x) << S_PHYADDR) + +#define S_REGADDR 0 +#define M_REGADDR 0x1f +#define V_REGADDR(x) ((x) << S_REGADDR) + +#define A_MI1_DATA 0x6b8 + +#define A_MI1_OP 0x6bc + +#define S_MDI_OP 0 +#define M_MDI_OP 0x3 +#define V_MDI_OP(x) ((x) << S_MDI_OP) + +#define A_SF_DATA 0x6d8 + +#define A_SF_OP 0x6dc + +#define S_BYTECNT 1 +#define M_BYTECNT 0x3 +#define V_BYTECNT(x) ((x) << S_BYTECNT) + +#define A_PL_INT_ENABLE0 0x6e0 + +#define S_T3DBG 23 +#define V_T3DBG(x) ((x) << S_T3DBG) +#define F_T3DBG V_T3DBG(1U) + +#define S_XGMAC0_1 20 +#define V_XGMAC0_1(x) ((x) << S_XGMAC0_1) +#define F_XGMAC0_1 V_XGMAC0_1(1U) + +#define S_XGMAC0_0 19 +#define V_XGMAC0_0(x) ((x) << S_XGMAC0_0) +#define F_XGMAC0_0 V_XGMAC0_0(1U) + +#define S_MC5A 18 +#define V_MC5A(x) ((x) << S_MC5A) +#define F_MC5A V_MC5A(1U) + +#define S_CPL_SWITCH 12 +#define V_CPL_SWITCH(x) ((x) << S_CPL_SWITCH) +#define F_CPL_SWITCH V_CPL_SWITCH(1U) + +#define S_MPS0 11 +#define V_MPS0(x) ((x) << S_MPS0) +#define F_MPS0 V_MPS0(1U) + +#define S_PM1_TX 10 +#define V_PM1_TX(x) ((x) << S_PM1_TX) +#define F_PM1_TX V_PM1_TX(1U) + +#define S_PM1_RX 9 +#define V_PM1_RX(x) ((x) << S_PM1_RX) +#define F_PM1_RX V_PM1_RX(1U) + +#define S_ULP2_TX 8 +#define V_ULP2_TX(x) ((x) << S_ULP2_TX) +#define F_ULP2_TX V_ULP2_TX(1U) + +#define S_ULP2_RX 7 +#define V_ULP2_RX(x) ((x) << S_ULP2_RX) +#define F_ULP2_RX V_ULP2_RX(1U) + +#define S_TP1 6 +#define V_TP1(x) ((x) << S_TP1) +#define F_TP1 V_TP1(1U) + +#define S_CIM 5 +#define V_CIM(x) ((x) << S_CIM) +#define F_CIM V_CIM(1U) + +#define S_MC7_CM 4 +#define V_MC7_CM(x) ((x) << S_MC7_CM) +#define F_MC7_CM V_MC7_CM(1U) + +#define S_MC7_PMTX 3 +#define V_MC7_PMTX(x) ((x) << S_MC7_PMTX) +#define F_MC7_PMTX V_MC7_PMTX(1U) + +#define S_MC7_PMRX 2 +#define V_MC7_PMRX(x) ((x) << S_MC7_PMRX) +#define F_MC7_PMRX V_MC7_PMRX(1U) + +#define S_PCIM0 1 +#define V_PCIM0(x) ((x) << S_PCIM0) +#define F_PCIM0 V_PCIM0(1U) + +#define S_SGE3 0 +#define V_SGE3(x) ((x) << S_SGE3) +#define F_SGE3 V_SGE3(1U) + +#define A_PL_INT_CAUSE0 0x6e4 + +#define A_PL_RST 0x6f0 + +#define S_CRSTWRM 1 +#define V_CRSTWRM(x) ((x) << S_CRSTWRM) +#define F_CRSTWRM V_CRSTWRM(1U) + +#define A_PL_REV 0x6f4 + +#define A_PL_CLI 0x6f8 + +#define A_MC5_DB_CONFIG 0x704 + +#define S_TMTYPEHI 30 +#define V_TMTYPEHI(x) ((x) << S_TMTYPEHI) +#define F_TMTYPEHI V_TMTYPEHI(1U) + +#define S_TMPARTSIZE 28 +#define M_TMPARTSIZE 0x3 +#define V_TMPARTSIZE(x) ((x) << S_TMPARTSIZE) +#define G_TMPARTSIZE(x) (((x) >> S_TMPARTSIZE) & M_TMPARTSIZE) + +#define S_TMTYPE 26 +#define M_TMTYPE 0x3 +#define V_TMTYPE(x) ((x) << S_TMTYPE) +#define G_TMTYPE(x) (((x) >> S_TMTYPE) & M_TMTYPE) + +#define S_COMPEN 17 +#define V_COMPEN(x) ((x) << S_COMPEN) +#define F_COMPEN V_COMPEN(1U) + +#define S_PRTYEN 6 +#define V_PRTYEN(x) ((x) << S_PRTYEN) +#define F_PRTYEN V_PRTYEN(1U) + +#define S_MBUSEN 5 +#define V_MBUSEN(x) ((x) << S_MBUSEN) +#define F_MBUSEN V_MBUSEN(1U) + +#define S_DBGIEN 4 +#define V_DBGIEN(x) ((x) << S_DBGIEN) +#define F_DBGIEN V_DBGIEN(1U) + +#define S_TMRDY 2 +#define V_TMRDY(x) ((x) << S_TMRDY) +#define F_TMRDY V_TMRDY(1U) + +#define S_TMRST 1 +#define V_TMRST(x) ((x) << S_TMRST) +#define F_TMRST V_TMRST(1U) + +#define S_TMMODE 0 +#define V_TMMODE(x) ((x) << S_TMMODE) +#define F_TMMODE V_TMMODE(1U) + +#define F_TMMODE V_TMMODE(1U) + +#define A_MC5_DB_ROUTING_TABLE_INDEX 0x70c + +#define A_MC5_DB_FILTER_TABLE 0x710 + +#define A_MC5_DB_SERVER_INDEX 0x714 + +#define A_MC5_DB_RSP_LATENCY 0x720 + +#define S_RDLAT 16 +#define M_RDLAT 0x1f +#define V_RDLAT(x) ((x) << S_RDLAT) + +#define S_LRNLAT 8 +#define M_LRNLAT 0x1f +#define V_LRNLAT(x) ((x) << S_LRNLAT) + +#define S_SRCHLAT 0 +#define M_SRCHLAT 0x1f +#define V_SRCHLAT(x) ((x) << S_SRCHLAT) + +#define A_MC5_DB_PART_ID_INDEX 0x72c + +#define A_MC5_DB_INT_ENABLE 0x740 + +#define S_DELACTEMPTY 18 +#define V_DELACTEMPTY(x) ((x) << S_DELACTEMPTY) +#define F_DELACTEMPTY V_DELACTEMPTY(1U) + +#define S_DISPQPARERR 17 +#define V_DISPQPARERR(x) ((x) << S_DISPQPARERR) +#define F_DISPQPARERR V_DISPQPARERR(1U) + +#define S_REQQPARERR 16 +#define V_REQQPARERR(x) ((x) << S_REQQPARERR) +#define F_REQQPARERR V_REQQPARERR(1U) + +#define S_UNKNOWNCMD 15 +#define V_UNKNOWNCMD(x) ((x) << S_UNKNOWNCMD) +#define F_UNKNOWNCMD V_UNKNOWNCMD(1U) + +#define S_NFASRCHFAIL 8 +#define V_NFASRCHFAIL(x) ((x) << S_NFASRCHFAIL) +#define F_NFASRCHFAIL V_NFASRCHFAIL(1U) + +#define S_ACTRGNFULL 7 +#define V_ACTRGNFULL(x) ((x) << S_ACTRGNFULL) +#define F_ACTRGNFULL V_ACTRGNFULL(1U) + +#define S_PARITYERR 6 +#define V_PARITYERR(x) ((x) << S_PARITYERR) +#define F_PARITYERR V_PARITYERR(1U) + +#define A_MC5_DB_INT_CAUSE 0x744 + +#define A_MC5_DB_DBGI_CONFIG 0x774 + +#define A_MC5_DB_DBGI_REQ_CMD 0x778 + +#define A_MC5_DB_DBGI_REQ_ADDR0 0x77c + +#define A_MC5_DB_DBGI_REQ_ADDR1 0x780 + +#define A_MC5_DB_DBGI_REQ_ADDR2 0x784 + +#define A_MC5_DB_DBGI_REQ_DATA0 0x788 + +#define A_MC5_DB_DBGI_REQ_DATA1 0x78c + +#define A_MC5_DB_DBGI_REQ_DATA2 0x790 + +#define A_MC5_DB_DBGI_RSP_STATUS 0x7b0 + +#define S_DBGIRSPVALID 0 +#define V_DBGIRSPVALID(x) ((x) << S_DBGIRSPVALID) +#define F_DBGIRSPVALID V_DBGIRSPVALID(1U) + +#define A_MC5_DB_DBGI_RSP_DATA0 0x7b4 + +#define A_MC5_DB_DBGI_RSP_DATA1 0x7b8 + +#define A_MC5_DB_DBGI_RSP_DATA2 0x7bc + +#define A_MC5_DB_POPEN_DATA_WR_CMD 0x7cc + +#define A_MC5_DB_POPEN_MASK_WR_CMD 0x7d0 + +#define A_MC5_DB_AOPEN_SRCH_CMD 0x7d4 + +#define A_MC5_DB_AOPEN_LRN_CMD 0x7d8 + +#define A_MC5_DB_SYN_SRCH_CMD 0x7dc + +#define A_MC5_DB_SYN_LRN_CMD 0x7e0 + +#define A_MC5_DB_ACK_SRCH_CMD 0x7e4 + +#define A_MC5_DB_ACK_LRN_CMD 0x7e8 + +#define A_MC5_DB_ILOOKUP_CMD 0x7ec + +#define A_MC5_DB_ELOOKUP_CMD 0x7f0 + +#define A_MC5_DB_DATA_WRITE_CMD 0x7f4 + +#define A_MC5_DB_DATA_READ_CMD 0x7f8 + +#define XGMAC0_0_BASE_ADDR 0x800 + +#define A_XGM_TX_CTRL 0x800 + +#define S_TXEN 0 +#define V_TXEN(x) ((x) << S_TXEN) +#define F_TXEN V_TXEN(1U) + +#define A_XGM_TX_CFG 0x804 + +#define S_TXPAUSEEN 0 +#define V_TXPAUSEEN(x) ((x) << S_TXPAUSEEN) +#define F_TXPAUSEEN V_TXPAUSEEN(1U) + +#define A_XGM_RX_CTRL 0x80c + +#define S_RXEN 0 +#define V_RXEN(x) ((x) << S_RXEN) +#define F_RXEN V_RXEN(1U) + +#define A_XGM_RX_CFG 0x810 + +#define S_DISPAUSEFRAMES 9 +#define V_DISPAUSEFRAMES(x) ((x) << S_DISPAUSEFRAMES) +#define F_DISPAUSEFRAMES V_DISPAUSEFRAMES(1U) + +#define S_EN1536BFRAMES 8 +#define V_EN1536BFRAMES(x) ((x) << S_EN1536BFRAMES) +#define F_EN1536BFRAMES V_EN1536BFRAMES(1U) + +#define S_ENJUMBO 7 +#define V_ENJUMBO(x) ((x) << S_ENJUMBO) +#define F_ENJUMBO V_ENJUMBO(1U) + +#define S_RMFCS 6 +#define V_RMFCS(x) ((x) << S_RMFCS) +#define F_RMFCS V_RMFCS(1U) + +#define S_ENHASHMCAST 2 +#define V_ENHASHMCAST(x) ((x) << S_ENHASHMCAST) +#define F_ENHASHMCAST V_ENHASHMCAST(1U) + +#define S_COPYALLFRAMES 0 +#define V_COPYALLFRAMES(x) ((x) << S_COPYALLFRAMES) +#define F_COPYALLFRAMES V_COPYALLFRAMES(1U) + +#define A_XGM_RX_HASH_LOW 0x814 + +#define A_XGM_RX_HASH_HIGH 0x818 + +#define A_XGM_RX_EXACT_MATCH_LOW_1 0x81c + +#define A_XGM_RX_EXACT_MATCH_HIGH_1 0x820 + +#define A_XGM_RX_EXACT_MATCH_LOW_2 0x824 + +#define A_XGM_RX_EXACT_MATCH_LOW_3 0x82c + +#define A_XGM_RX_EXACT_MATCH_LOW_4 0x834 + +#define A_XGM_RX_EXACT_MATCH_LOW_5 0x83c + +#define A_XGM_RX_EXACT_MATCH_LOW_6 0x844 + +#define A_XGM_RX_EXACT_MATCH_LOW_7 0x84c + +#define A_XGM_RX_EXACT_MATCH_LOW_8 0x854 + +#define A_XGM_STAT_CTRL 0x880 + +#define S_CLRSTATS 2 +#define V_CLRSTATS(x) ((x) << S_CLRSTATS) +#define F_CLRSTATS V_CLRSTATS(1U) + +#define A_XGM_RXFIFO_CFG 0x884 + +#define S_RXFIFOPAUSEHWM 17 +#define M_RXFIFOPAUSEHWM 0xfff + +#define V_RXFIFOPAUSEHWM(x) ((x) << S_RXFIFOPAUSEHWM) + +#define G_RXFIFOPAUSEHWM(x) (((x) >> S_RXFIFOPAUSEHWM) & M_RXFIFOPAUSEHWM) + +#define S_RXFIFOPAUSELWM 5 +#define M_RXFIFOPAUSELWM 0xfff + +#define V_RXFIFOPAUSELWM(x) ((x) << S_RXFIFOPAUSELWM) + +#define G_RXFIFOPAUSELWM(x) (((x) >> S_RXFIFOPAUSELWM) & M_RXFIFOPAUSELWM) + +#define S_RXSTRFRWRD 1 +#define V_RXSTRFRWRD(x) ((x) << S_RXSTRFRWRD) +#define F_RXSTRFRWRD V_RXSTRFRWRD(1U) + +#define S_DISERRFRAMES 0 +#define V_DISERRFRAMES(x) ((x) << S_DISERRFRAMES) +#define F_DISERRFRAMES V_DISERRFRAMES(1U) + +#define A_XGM_TXFIFO_CFG 0x888 + +#define S_TXFIFOTHRESH 4 +#define M_TXFIFOTHRESH 0x1ff + +#define V_TXFIFOTHRESH(x) ((x) << S_TXFIFOTHRESH) + +#define A_XGM_SERDES_CTRL 0x890 +#define A_XGM_SERDES_CTRL0 0x8e0 + +#define S_SERDESRESET_ 24 +#define V_SERDESRESET_(x) ((x) << S_SERDESRESET_) +#define F_SERDESRESET_ V_SERDESRESET_(1U) + +#define S_RXENABLE 4 +#define V_RXENABLE(x) ((x) << S_RXENABLE) +#define F_RXENABLE V_RXENABLE(1U) + +#define S_TXENABLE 3 +#define V_TXENABLE(x) ((x) << S_TXENABLE) +#define F_TXENABLE V_TXENABLE(1U) + +#define A_XGM_PAUSE_TIMER 0x890 + +#define A_XGM_RGMII_IMP 0x89c + +#define S_XGM_IMPSETUPDATE 6 +#define V_XGM_IMPSETUPDATE(x) ((x) << S_XGM_IMPSETUPDATE) +#define F_XGM_IMPSETUPDATE V_XGM_IMPSETUPDATE(1U) + +#define S_RGMIIIMPPD 3 +#define M_RGMIIIMPPD 0x7 +#define V_RGMIIIMPPD(x) ((x) << S_RGMIIIMPPD) + +#define S_RGMIIIMPPU 0 +#define M_RGMIIIMPPU 0x7 +#define V_RGMIIIMPPU(x) ((x) << S_RGMIIIMPPU) + +#define S_CALRESET 8 +#define V_CALRESET(x) ((x) << S_CALRESET) +#define F_CALRESET V_CALRESET(1U) + +#define S_CALUPDATE 7 +#define V_CALUPDATE(x) ((x) << S_CALUPDATE) +#define F_CALUPDATE V_CALUPDATE(1U) + +#define A_XGM_XAUI_IMP 0x8a0 + +#define S_CALBUSY 31 +#define V_CALBUSY(x) ((x) << S_CALBUSY) +#define F_CALBUSY V_CALBUSY(1U) + +#define S_XGM_CALFAULT 29 +#define V_XGM_CALFAULT(x) ((x) << S_XGM_CALFAULT) +#define F_XGM_CALFAULT V_XGM_CALFAULT(1U) + +#define S_CALIMP 24 +#define M_CALIMP 0x1f +#define V_CALIMP(x) ((x) << S_CALIMP) +#define G_CALIMP(x) (((x) >> S_CALIMP) & M_CALIMP) + +#define S_XAUIIMP 0 +#define M_XAUIIMP 0x7 +#define V_XAUIIMP(x) ((x) << S_XAUIIMP) + +#define A_XGM_RX_MAX_PKT_SIZE 0x8a8 +#define A_XGM_RX_MAX_PKT_SIZE_ERR_CNT 0x9a4 + +#define A_XGM_RESET_CTRL 0x8ac + +#define S_XG2G_RESET_ 3 +#define V_XG2G_RESET_(x) ((x) << S_XG2G_RESET_) +#define F_XG2G_RESET_ V_XG2G_RESET_(1U) + +#define S_RGMII_RESET_ 2 +#define V_RGMII_RESET_(x) ((x) << S_RGMII_RESET_) +#define F_RGMII_RESET_ V_RGMII_RESET_(1U) + +#define S_PCS_RESET_ 1 +#define V_PCS_RESET_(x) ((x) << S_PCS_RESET_) +#define F_PCS_RESET_ V_PCS_RESET_(1U) + +#define S_MAC_RESET_ 0 +#define V_MAC_RESET_(x) ((x) << S_MAC_RESET_) +#define F_MAC_RESET_ V_MAC_RESET_(1U) + +#define A_XGM_PORT_CFG 0x8b8 + +#define S_CLKDIVRESET_ 3 +#define V_CLKDIVRESET_(x) ((x) << S_CLKDIVRESET_) +#define F_CLKDIVRESET_ V_CLKDIVRESET_(1U) + +#define S_PORTSPEED 1 +#define M_PORTSPEED 0x3 + +#define V_PORTSPEED(x) ((x) << S_PORTSPEED) + +#define S_ENRGMII 0 +#define V_ENRGMII(x) ((x) << S_ENRGMII) +#define F_ENRGMII V_ENRGMII(1U) + +#define A_XGM_INT_ENABLE 0x8d4 + +#define S_TXFIFO_PRTY_ERR 17 +#define M_TXFIFO_PRTY_ERR 0x7 + +#define V_TXFIFO_PRTY_ERR(x) ((x) << S_TXFIFO_PRTY_ERR) + +#define S_RXFIFO_PRTY_ERR 14 +#define M_RXFIFO_PRTY_ERR 0x7 + +#define V_RXFIFO_PRTY_ERR(x) ((x) << S_RXFIFO_PRTY_ERR) + +#define S_TXFIFO_UNDERRUN 13 +#define V_TXFIFO_UNDERRUN(x) ((x) << S_TXFIFO_UNDERRUN) +#define F_TXFIFO_UNDERRUN V_TXFIFO_UNDERRUN(1U) + +#define S_RXFIFO_OVERFLOW 12 +#define V_RXFIFO_OVERFLOW(x) ((x) << S_RXFIFO_OVERFLOW) +#define F_RXFIFO_OVERFLOW V_RXFIFO_OVERFLOW(1U) + +#define S_SERDES_LOS 4 +#define M_SERDES_LOS 0xf + +#define V_SERDES_LOS(x) ((x) << S_SERDES_LOS) + +#define S_XAUIPCSCTCERR 3 +#define V_XAUIPCSCTCERR(x) ((x) << S_XAUIPCSCTCERR) +#define F_XAUIPCSCTCERR V_XAUIPCSCTCERR(1U) + +#define S_XAUIPCSALIGNCHANGE 2 +#define V_XAUIPCSALIGNCHANGE(x) ((x) << S_XAUIPCSALIGNCHANGE) +#define F_XAUIPCSALIGNCHANGE V_XAUIPCSALIGNCHANGE(1U) + +#define A_XGM_INT_CAUSE 0x8d8 + +#define A_XGM_XAUI_ACT_CTRL 0x8dc + +#define S_TXACTENABLE 1 +#define V_TXACTENABLE(x) ((x) << S_TXACTENABLE) +#define F_TXACTENABLE V_TXACTENABLE(1U) + +#define A_XGM_SERDES_CTRL0 0x8e0 + +#define S_RESET3 23 +#define V_RESET3(x) ((x) << S_RESET3) +#define F_RESET3 V_RESET3(1U) + +#define S_RESET2 22 +#define V_RESET2(x) ((x) << S_RESET2) +#define F_RESET2 V_RESET2(1U) + +#define S_RESET1 21 +#define V_RESET1(x) ((x) << S_RESET1) +#define F_RESET1 V_RESET1(1U) + +#define S_RESET0 20 +#define V_RESET0(x) ((x) << S_RESET0) +#define F_RESET0 V_RESET0(1U) + +#define S_PWRDN3 19 +#define V_PWRDN3(x) ((x) << S_PWRDN3) +#define F_PWRDN3 V_PWRDN3(1U) + +#define S_PWRDN2 18 +#define V_PWRDN2(x) ((x) << S_PWRDN2) +#define F_PWRDN2 V_PWRDN2(1U) + +#define S_PWRDN1 17 +#define V_PWRDN1(x) ((x) << S_PWRDN1) +#define F_PWRDN1 V_PWRDN1(1U) + +#define S_PWRDN0 16 +#define V_PWRDN0(x) ((x) << S_PWRDN0) +#define F_PWRDN0 V_PWRDN0(1U) + +#define S_RESETPLL23 15 +#define V_RESETPLL23(x) ((x) << S_RESETPLL23) +#define F_RESETPLL23 V_RESETPLL23(1U) + +#define S_RESETPLL01 14 +#define V_RESETPLL01(x) ((x) << S_RESETPLL01) +#define F_RESETPLL01 V_RESETPLL01(1U) + +#define A_XGM_SERDES_STAT0 0x8f0 + +#define S_LOWSIG0 0 +#define V_LOWSIG0(x) ((x) << S_LOWSIG0) +#define F_LOWSIG0 V_LOWSIG0(1U) + +#define A_XGM_SERDES_STAT3 0x8fc + +#define A_XGM_STAT_TX_BYTE_LOW 0x900 + +#define A_XGM_STAT_TX_BYTE_HIGH 0x904 + +#define A_XGM_STAT_TX_FRAME_LOW 0x908 + +#define A_XGM_STAT_TX_FRAME_HIGH 0x90c + +#define A_XGM_STAT_TX_BCAST 0x910 + +#define A_XGM_STAT_TX_MCAST 0x914 + +#define A_XGM_STAT_TX_PAUSE 0x918 + +#define A_XGM_STAT_TX_64B_FRAMES 0x91c + +#define A_XGM_STAT_TX_65_127B_FRAMES 0x920 + +#define A_XGM_STAT_TX_128_255B_FRAMES 0x924 + +#define A_XGM_STAT_TX_256_511B_FRAMES 0x928 + +#define A_XGM_STAT_TX_512_1023B_FRAMES 0x92c + +#define A_XGM_STAT_TX_1024_1518B_FRAMES 0x930 + +#define A_XGM_STAT_TX_1519_MAXB_FRAMES 0x934 + +#define A_XGM_STAT_TX_ERR_FRAMES 0x938 + +#define A_XGM_STAT_RX_BYTES_LOW 0x93c + +#define A_XGM_STAT_RX_BYTES_HIGH 0x940 + +#define A_XGM_STAT_RX_FRAMES_LOW 0x944 + +#define A_XGM_STAT_RX_FRAMES_HIGH 0x948 + +#define A_XGM_STAT_RX_BCAST_FRAMES 0x94c + +#define A_XGM_STAT_RX_MCAST_FRAMES 0x950 + +#define A_XGM_STAT_RX_PAUSE_FRAMES 0x954 + +#define A_XGM_STAT_RX_64B_FRAMES 0x958 + +#define A_XGM_STAT_RX_65_127B_FRAMES 0x95c + +#define A_XGM_STAT_RX_128_255B_FRAMES 0x960 + +#define A_XGM_STAT_RX_256_511B_FRAMES 0x964 + +#define A_XGM_STAT_RX_512_1023B_FRAMES 0x968 + +#define A_XGM_STAT_RX_1024_1518B_FRAMES 0x96c + +#define A_XGM_STAT_RX_1519_MAXB_FRAMES 0x970 + +#define A_XGM_STAT_RX_SHORT_FRAMES 0x974 + +#define A_XGM_STAT_RX_OVERSIZE_FRAMES 0x978 + +#define A_XGM_STAT_RX_JABBER_FRAMES 0x97c + +#define A_XGM_STAT_RX_CRC_ERR_FRAMES 0x980 + +#define A_XGM_STAT_RX_LENGTH_ERR_FRAMES 0x984 + +#define A_XGM_STAT_RX_SYM_CODE_ERR_FRAMES 0x988 + +#define A_XGM_SERDES_STATUS0 0x98c + +#define A_XGM_SERDES_STATUS1 0x990 + +#define S_CMULOCK 31 +#define V_CMULOCK(x) ((x) << S_CMULOCK) +#define F_CMULOCK V_CMULOCK(1U) + +#define A_XGM_RX_MAX_PKT_SIZE_ERR_CNT 0x9a4 + +#define A_XGM_RX_SPI4_SOP_EOP_CNT 0x9ac + +#define XGMAC0_1_BASE_ADDR 0xa00 diff --git a/drivers/net/cxgb3/sge.c b/drivers/net/cxgb3/sge.c new file mode 100644 index 00000000000..6c77f4bab62 --- /dev/null +++ b/drivers/net/cxgb3/sge.c @@ -0,0 +1,2702 @@ +/* + * This file is part of the Chelsio T3 Ethernet driver. + * + * Copyright (C) 2005-2006 Chelsio Communications. All rights reserved. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the LICENSE file included in this + * release for licensing terms and conditions. + */ + +#include <linux/skbuff.h> +#include <linux/netdevice.h> +#include <linux/etherdevice.h> +#include <linux/if_vlan.h> +#include <linux/ip.h> +#include <linux/tcp.h> +#include <linux/dma-mapping.h> +#include "common.h" +#include "regs.h" +#include "sge_defs.h" +#include "t3_cpl.h" +#include "firmware_exports.h" + +#define USE_GTS 0 + +#define SGE_RX_SM_BUF_SIZE 1536 +#define SGE_RX_COPY_THRES 256 + +# define SGE_RX_DROP_THRES 16 + +/* + * Period of the Tx buffer reclaim timer. This timer does not need to run + * frequently as Tx buffers are usually reclaimed by new Tx packets. + */ +#define TX_RECLAIM_PERIOD (HZ / 4) + +/* WR size in bytes */ +#define WR_LEN (WR_FLITS * 8) + +/* + * Types of Tx queues in each queue set. Order here matters, do not change. + */ +enum { TXQ_ETH, TXQ_OFLD, TXQ_CTRL }; + +/* Values for sge_txq.flags */ +enum { + TXQ_RUNNING = 1 << 0, /* fetch engine is running */ + TXQ_LAST_PKT_DB = 1 << 1, /* last packet rang the doorbell */ +}; + +struct tx_desc { + u64 flit[TX_DESC_FLITS]; +}; + +struct rx_desc { + __be32 addr_lo; + __be32 len_gen; + __be32 gen2; + __be32 addr_hi; +}; + +struct tx_sw_desc { /* SW state per Tx descriptor */ + struct sk_buff *skb; +}; + +struct rx_sw_desc { /* SW state per Rx descriptor */ + struct sk_buff *skb; + DECLARE_PCI_UNMAP_ADDR(dma_addr); +}; + +struct rsp_desc { /* response queue descriptor */ + struct rss_header rss_hdr; + __be32 flags; + __be32 len_cq; + u8 imm_data[47]; + u8 intr_gen; +}; + +struct unmap_info { /* packet unmapping info, overlays skb->cb */ + int sflit; /* start flit of first SGL entry in Tx descriptor */ + u16 fragidx; /* first page fragment in current Tx descriptor */ + u16 addr_idx; /* buffer index of first SGL entry in descriptor */ + u32 len; /* mapped length of skb main body */ +}; + +/* + * Maps a number of flits to the number of Tx descriptors that can hold them. + * The formula is + * + * desc = 1 + (flits - 2) / (WR_FLITS - 1). + * + * HW allows up to 4 descriptors to be combined into a WR. + */ +static u8 flit_desc_map[] = { + 0, +#if SGE_NUM_GENBITS == 1 + 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, + 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, + 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, + 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4 +#elif SGE_NUM_GENBITS == 2 + 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, + 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, + 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, + 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, +#else +# error "SGE_NUM_GENBITS must be 1 or 2" +#endif +}; + +static inline struct sge_qset *fl_to_qset(const struct sge_fl *q, int qidx) +{ + return container_of(q, struct sge_qset, fl[qidx]); +} + +static inline struct sge_qset *rspq_to_qset(const struct sge_rspq *q) +{ + return container_of(q, struct sge_qset, rspq); +} + +static inline struct sge_qset *txq_to_qset(const struct sge_txq *q, int qidx) +{ + return container_of(q, struct sge_qset, txq[qidx]); +} + +/** + * refill_rspq - replenish an SGE response queue + * @adapter: the adapter + * @q: the response queue to replenish + * @credits: how many new responses to make available + * + * Replenishes a response queue by making the supplied number of responses + * available to HW. + */ +static inline void refill_rspq(struct adapter *adapter, + const struct sge_rspq *q, unsigned int credits) +{ + t3_write_reg(adapter, A_SG_RSPQ_CREDIT_RETURN, + V_RSPQ(q->cntxt_id) | V_CREDITS(credits)); +} + +/** + * need_skb_unmap - does the platform need unmapping of sk_buffs? + * + * Returns true if the platfrom needs sk_buff unmapping. The compiler + * optimizes away unecessary code if this returns true. + */ +static inline int need_skb_unmap(void) +{ + /* + * This structure is used to tell if the platfrom needs buffer + * unmapping by checking if DECLARE_PCI_UNMAP_ADDR defines anything. + */ + struct dummy { + DECLARE_PCI_UNMAP_ADDR(addr); + }; + + return sizeof(struct dummy) != 0; +} + +/** + * unmap_skb - unmap a packet main body and its page fragments + * @skb: the packet + * @q: the Tx queue containing Tx descriptors for the packet + * @cidx: index of Tx descriptor + * @pdev: the PCI device + * + * Unmap the main body of an sk_buff and its page fragments, if any. + * Because of the fairly complicated structure of our SGLs and the desire + * to conserve space for metadata, we keep the information necessary to + * unmap an sk_buff partly in the sk_buff itself (in its cb), and partly + * in the Tx descriptors (the physical addresses of the various data + * buffers). The send functions initialize the state in skb->cb so we + * can unmap the buffers held in the first Tx descriptor here, and we + * have enough information at this point to update the state for the next + * Tx descriptor. + */ +static inline void unmap_skb(struct sk_buff *skb, struct sge_txq *q, + unsigned int cidx, struct pci_dev *pdev) +{ + const struct sg_ent *sgp; + struct unmap_info *ui = (struct unmap_info *)skb->cb; + int nfrags, frag_idx, curflit, j = ui->addr_idx; + + sgp = (struct sg_ent *)&q->desc[cidx].flit[ui->sflit]; + + if (ui->len) { + pci_unmap_single(pdev, be64_to_cpu(sgp->addr[0]), ui->len, + PCI_DMA_TODEVICE); + ui->len = 0; /* so we know for next descriptor for this skb */ + j = 1; + } + + frag_idx = ui->fragidx; + curflit = ui->sflit + 1 + j; + nfrags = skb_shinfo(skb)->nr_frags; + + while (frag_idx < nfrags && curflit < WR_FLITS) { + pci_unmap_page(pdev, be64_to_cpu(sgp->addr[j]), + skb_shinfo(skb)->frags[frag_idx].size, + PCI_DMA_TODEVICE); + j ^= 1; + if (j == 0) { + sgp++; + curflit++; + } + curflit++; + frag_idx++; + } + + if (frag_idx < nfrags) { /* SGL continues into next Tx descriptor */ + ui->fragidx = frag_idx; + ui->addr_idx = j; + ui->sflit = curflit - WR_FLITS - j; /* sflit can be -1 */ + } +} + +/** + * free_tx_desc - reclaims Tx descriptors and their buffers + * @adapter: the adapter + * @q: the Tx queue to reclaim descriptors from + * @n: the number of descriptors to reclaim + * + * Reclaims Tx descriptors from an SGE Tx queue and frees the associated + * Tx buffers. Called with the Tx queue lock held. + */ +static void free_tx_desc(struct adapter *adapter, struct sge_txq *q, + unsigned int n) +{ + struct tx_sw_desc *d; + struct pci_dev *pdev = adapter->pdev; + unsigned int cidx = q->cidx; + + d = &q->sdesc[cidx]; + while (n--) { + if (d->skb) { /* an SGL is present */ + if (need_skb_unmap()) + unmap_skb(d->skb, q, cidx, pdev); + if (d->skb->priority == cidx) + kfree_skb(d->skb); + } + ++d; + if (++cidx == q->size) { + cidx = 0; + d = q->sdesc; + } + } + q->cidx = cidx; +} + +/** + * reclaim_completed_tx - reclaims completed Tx descriptors + * @adapter: the adapter + * @q: the Tx queue to reclaim completed descriptors from + * + * Reclaims Tx descriptors that the SGE has indicated it has processed, + * and frees the associated buffers if possible. Called with the Tx + * queue's lock held. + */ +static inline void reclaim_completed_tx(struct adapter *adapter, + struct sge_txq *q) +{ + unsigned int reclaim = q->processed - q->cleaned; + + if (reclaim) { + free_tx_desc(adapter, q, reclaim); + q->cleaned += reclaim; + q->in_use -= reclaim; + } +} + +/** + * should_restart_tx - are there enough resources to restart a Tx queue? + * @q: the Tx queue + * + * Checks if there are enough descriptors to restart a suspended Tx queue. + */ +static inline int should_restart_tx(const struct sge_txq *q) +{ + unsigned int r = q->processed - q->cleaned; + + return q->in_use - r < (q->size >> 1); +} + +/** + * free_rx_bufs - free the Rx buffers on an SGE free list + * @pdev: the PCI device associated with the adapter + * @rxq: the SGE free list to clean up + * + * Release the buffers on an SGE free-buffer Rx queue. HW fetching from + * this queue should be stopped before calling this function. + */ +static void free_rx_bufs(struct pci_dev *pdev, struct sge_fl *q) +{ + unsigned int cidx = q->cidx; + + while (q->credits--) { + struct rx_sw_desc *d = &q->sdesc[cidx]; + + pci_unmap_single(pdev, pci_unmap_addr(d, dma_addr), + q->buf_size, PCI_DMA_FROMDEVICE); + kfree_skb(d->skb); + d->skb = NULL; + if (++cidx == q->size) + cidx = 0; + } +} + +/** + * add_one_rx_buf - add a packet buffer to a free-buffer list + * @skb: the buffer to add + * @len: the buffer length + * @d: the HW Rx descriptor to write + * @sd: the SW Rx descriptor to write + * @gen: the generation bit value + * @pdev: the PCI device associated with the adapter + * + * Add a buffer of the given length to the supplied HW and SW Rx + * descriptors. + */ +static inline void add_one_rx_buf(struct sk_buff *skb, unsigned int len, + struct rx_desc *d, struct rx_sw_desc *sd, + unsigned int gen, struct pci_dev *pdev) +{ + dma_addr_t mapping; + + sd->skb = skb; + mapping = pci_map_single(pdev, skb->data, len, PCI_DMA_FROMDEVICE); + pci_unmap_addr_set(sd, dma_addr, mapping); + + d->addr_lo = cpu_to_be32(mapping); + d->addr_hi = cpu_to_be32((u64) mapping >> 32); + wmb(); + d->len_gen = cpu_to_be32(V_FLD_GEN1(gen)); + d->gen2 = cpu_to_be32(V_FLD_GEN2(gen)); +} + +/** + * refill_fl - refill an SGE free-buffer list + * @adapter: the adapter + * @q: the free-list to refill + * @n: the number of new buffers to allocate + * @gfp: the gfp flags for allocating new buffers + * + * (Re)populate an SGE free-buffer list with up to @n new packet buffers, + * allocated with the supplied gfp flags. The caller must assure that + * @n does not exceed the queue's capacity. + */ +static void refill_fl(struct adapter *adap, struct sge_fl *q, int n, gfp_t gfp) +{ + struct rx_sw_desc *sd = &q->sdesc[q->pidx]; + struct rx_desc *d = &q->desc[q->pidx]; + + while (n--) { + struct sk_buff *skb = alloc_skb(q->buf_size, gfp); + + if (!skb) + break; + + add_one_rx_buf(skb, q->buf_size, d, sd, q->gen, adap->pdev); + d++; + sd++; + if (++q->pidx == q->size) { + q->pidx = 0; + q->gen ^= 1; + sd = q->sdesc; + d = q->desc; + } + q->credits++; + } + + t3_write_reg(adap, A_SG_KDOORBELL, V_EGRCNTX(q->cntxt_id)); +} + +static inline void __refill_fl(struct adapter *adap, struct sge_fl *fl) +{ + refill_fl(adap, fl, min(16U, fl->size - fl->credits), GFP_ATOMIC); +} + +/** + * recycle_rx_buf - recycle a receive buffer + * @adapter: the adapter + * @q: the SGE free list + * @idx: index of buffer to recycle + * + * Recycles the specified buffer on the given free list by adding it at + * the next available slot on the list. + */ +static void recycle_rx_buf(struct adapter *adap, struct sge_fl *q, + unsigned int idx) +{ + struct rx_desc *from = &q->desc[idx]; + struct rx_desc *to = &q->desc[q->pidx]; + + q->sdesc[q->pidx] = q->sdesc[idx]; + to->addr_lo = from->addr_lo; /* already big endian */ + to->addr_hi = from->addr_hi; /* likewise */ + wmb(); + to->len_gen = cpu_to_be32(V_FLD_GEN1(q->gen)); + to->gen2 = cpu_to_be32(V_FLD_GEN2(q->gen)); + q->credits++; + + if (++q->pidx == q->size) { + q->pidx = 0; + q->gen ^= 1; + } + t3_write_reg(adap, A_SG_KDOORBELL, V_EGRCNTX(q->cntxt_id)); +} + +/** + * alloc_ring - allocate resources for an SGE descriptor ring + * @pdev: the PCI device + * @nelem: the number of descriptors + * @elem_size: the size of each descriptor + * @sw_size: the size of the SW state associated with each ring element + * @phys: the physical address of the allocated ring + * @metadata: address of the array holding the SW state for the ring + * + * Allocates resources for an SGE descriptor ring, such as Tx queues, + * free buffer lists, or response queues. Each SGE ring requires + * space for its HW descriptors plus, optionally, space for the SW state + * associated with each HW entry (the metadata). The function returns + * three values: the virtual address for the HW ring (the return value + * of the function), the physical address of the HW ring, and the address + * of the SW ring. + */ +static void *alloc_ring(struct pci_dev *pdev, size_t nelem, size_t elem_size, + size_t sw_size, dma_addr_t *phys, void *metadata) +{ + size_t len = nelem * elem_size; + void *s = NULL; + void *p = dma_alloc_coherent(&pdev->dev, len, phys, GFP_KERNEL); + + if (!p) + return NULL; + if (sw_size) { + s = kcalloc(nelem, sw_size, GFP_KERNEL); + + if (!s) { + dma_free_coherent(&pdev->dev, len, p, *phys); + return NULL; + } + } + if (metadata) + *(void **)metadata = s; + memset(p, 0, len); + return p; +} + +/** + * free_qset - free the resources of an SGE queue set + * @adapter: the adapter owning the queue set + * @q: the queue set + * + * Release the HW and SW resources associated with an SGE queue set, such + * as HW contexts, packet buffers, and descriptor rings. Traffic to the + * queue set must be quiesced prior to calling this. + */ +void t3_free_qset(struct adapter *adapter, struct sge_qset *q) +{ + int i; + struct pci_dev *pdev = adapter->pdev; + + if (q->tx_reclaim_timer.function) + del_timer_sync(&q->tx_reclaim_timer); + + for (i = 0; i < SGE_RXQ_PER_SET; ++i) + if (q->fl[i].desc) { + spin_lock(&adapter->sge.reg_lock); + t3_sge_disable_fl(adapter, q->fl[i].cntxt_id); + spin_unlock(&adapter->sge.reg_lock); + free_rx_bufs(pdev, &q->fl[i]); + kfree(q->fl[i].sdesc); + dma_free_coherent(&pdev->dev, + q->fl[i].size * + sizeof(struct rx_desc), q->fl[i].desc, + q->fl[i].phys_addr); + } + + for (i = 0; i < SGE_TXQ_PER_SET; ++i) + if (q->txq[i].desc) { + spin_lock(&adapter->sge.reg_lock); + t3_sge_enable_ecntxt(adapter, q->txq[i].cntxt_id, 0); + spin_unlock(&adapter->sge.reg_lock); + if (q->txq[i].sdesc) { + free_tx_desc(adapter, &q->txq[i], + q->txq[i].in_use); + kfree(q->txq[i].sdesc); + } + dma_free_coherent(&pdev->dev, + q->txq[i].size * + sizeof(struct tx_desc), + q->txq[i].desc, q->txq[i].phys_addr); + __skb_queue_purge(&q->txq[i].sendq); + } + + if (q->rspq.desc) { + spin_lock(&adapter->sge.reg_lock); + t3_sge_disable_rspcntxt(adapter, q->rspq.cntxt_id); + spin_unlock(&adapter->sge.reg_lock); + dma_free_coherent(&pdev->dev, + q->rspq.size * sizeof(struct rsp_desc), + q->rspq.desc, q->rspq.phys_addr); + } + + if (q->netdev) + q->netdev->atalk_ptr = NULL; + + memset(q, 0, sizeof(*q)); +} + +/** + * init_qset_cntxt - initialize an SGE queue set context info + * @qs: the queue set + * @id: the queue set id + * + * Initializes the TIDs and context ids for the queues of a queue set. + */ +static void init_qset_cntxt(struct sge_qset *qs, unsigned int id) +{ + qs->rspq.cntxt_id = id; + qs->fl[0].cntxt_id = 2 * id; + qs->fl[1].cntxt_id = 2 * id + 1; + qs->txq[TXQ_ETH].cntxt_id = FW_TUNNEL_SGEEC_START + id; + qs->txq[TXQ_ETH].token = FW_TUNNEL_TID_START + id; + qs->txq[TXQ_OFLD].cntxt_id = FW_OFLD_SGEEC_START + id; + qs->txq[TXQ_CTRL].cntxt_id = FW_CTRL_SGEEC_START + id; + qs->txq[TXQ_CTRL].token = FW_CTRL_TID_START + id; +} + +/** + * sgl_len - calculates the size of an SGL of the given capacity + * @n: the number of SGL entries + * + * Calculates the number of flits needed for a scatter/gather list that + * can hold the given number of entries. + */ +static inline unsigned int sgl_len(unsigned int n) +{ + /* alternatively: 3 * (n / 2) + 2 * (n & 1) */ + return (3 * n) / 2 + (n & 1); +} + +/** + * flits_to_desc - returns the num of Tx descriptors for the given flits + * @n: the number of flits + * + * Calculates the number of Tx descriptors needed for the supplied number + * of flits. + */ +static inline unsigned int flits_to_desc(unsigned int n) +{ + BUG_ON(n >= ARRAY_SIZE(flit_desc_map)); + return flit_desc_map[n]; +} + +/** + * get_packet - return the next ingress packet buffer from a free list + * @adap: the adapter that received the packet + * @fl: the SGE free list holding the packet + * @len: the packet length including any SGE padding + * @drop_thres: # of remaining buffers before we start dropping packets + * + * Get the next packet from a free list and complete setup of the + * sk_buff. If the packet is small we make a copy and recycle the + * original buffer, otherwise we use the original buffer itself. If a + * positive drop threshold is supplied packets are dropped and their + * buffers recycled if (a) the number of remaining buffers is under the + * threshold and the packet is too big to copy, or (b) the packet should + * be copied but there is no memory for the copy. + */ +static struct sk_buff *get_packet(struct adapter *adap, struct sge_fl *fl, + unsigned int len, unsigned int drop_thres) +{ + struct sk_buff *skb = NULL; + struct rx_sw_desc *sd = &fl->sdesc[fl->cidx]; + + prefetch(sd->skb->data); + + if (len <= SGE_RX_COPY_THRES) { + skb = alloc_skb(len, GFP_ATOMIC); + if (likely(skb != NULL)) { + __skb_put(skb, len); + pci_dma_sync_single_for_cpu(adap->pdev, + pci_unmap_addr(sd, + dma_addr), + len, PCI_DMA_FROMDEVICE); + memcpy(skb->data, sd->skb->data, len); + pci_dma_sync_single_for_device(adap->pdev, + pci_unmap_addr(sd, + dma_addr), + len, PCI_DMA_FROMDEVICE); + } else if (!drop_thres) + goto use_orig_buf; + recycle: + recycle_rx_buf(adap, fl, fl->cidx); + return skb; + } + + if (unlikely(fl->credits < drop_thres)) + goto recycle; + + use_orig_buf: + pci_unmap_single(adap->pdev, pci_unmap_addr(sd, dma_addr), + fl->buf_size, PCI_DMA_FROMDEVICE); + skb = sd->skb; + skb_put(skb, len); + __refill_fl(adap, fl); + return skb; +} + +/** + * get_imm_packet - return the next ingress packet buffer from a response + * @resp: the response descriptor containing the packet data + * + * Return a packet containing the immediate data of the given response. + */ +static inline struct sk_buff *get_imm_packet(const struct rsp_desc *resp) +{ + struct sk_buff *skb = alloc_skb(IMMED_PKT_SIZE, GFP_ATOMIC); + + if (skb) { + __skb_put(skb, IMMED_PKT_SIZE); + memcpy(skb->data, resp->imm_data, IMMED_PKT_SIZE); + } + return skb; +} + +/** + * calc_tx_descs - calculate the number of Tx descriptors for a packet + * @skb: the packet + * + * Returns the number of Tx descriptors needed for the given Ethernet + * packet. Ethernet packets require addition of WR and CPL headers. + */ +static inline unsigned int calc_tx_descs(const struct sk_buff *skb) +{ + unsigned int flits; + + if (skb->len <= WR_LEN - sizeof(struct cpl_tx_pkt)) + return 1; + + flits = sgl_len(skb_shinfo(skb)->nr_frags + 1) + 2; + if (skb_shinfo(skb)->gso_size) + flits++; + return flits_to_desc(flits); +} + +/** + * make_sgl - populate a scatter/gather list for a packet + * @skb: the packet + * @sgp: the SGL to populate + * @start: start address of skb main body data to include in the SGL + * @len: length of skb main body data to include in the SGL + * @pdev: the PCI device + * + * Generates a scatter/gather list for the buffers that make up a packet + * and returns the SGL size in 8-byte words. The caller must size the SGL + * appropriately. + */ +static inline unsigned int make_sgl(const struct sk_buff *skb, + struct sg_ent *sgp, unsigned char *start, + unsigned int len, struct pci_dev *pdev) +{ + dma_addr_t mapping; + unsigned int i, j = 0, nfrags; + + if (len) { + mapping = pci_map_single(pdev, start, len, PCI_DMA_TODEVICE); + sgp->len[0] = cpu_to_be32(len); + sgp->addr[0] = cpu_to_be64(mapping); + j = 1; + } + + nfrags = skb_shinfo(skb)->nr_frags; + for (i = 0; i < nfrags; i++) { + skb_frag_t *frag = &skb_shinfo(skb)->frags[i]; + + mapping = pci_map_page(pdev, frag->page, frag->page_offset, + frag->size, PCI_DMA_TODEVICE); + sgp->len[j] = cpu_to_be32(frag->size); + sgp->addr[j] = cpu_to_be64(mapping); + j ^= 1; + if (j == 0) + ++sgp; + } + if (j) + sgp->len[j] = 0; + return ((nfrags + (len != 0)) * 3) / 2 + j; +} + +/** + * check_ring_tx_db - check and potentially ring a Tx queue's doorbell + * @adap: the adapter + * @q: the Tx queue + * + * Ring the doorbel if a Tx queue is asleep. There is a natural race, + * where the HW is going to sleep just after we checked, however, + * then the interrupt handler will detect the outstanding TX packet + * and ring the doorbell for us. + * + * When GTS is disabled we unconditionally ring the doorbell. + */ +static inline void check_ring_tx_db(struct adapter *adap, struct sge_txq *q) +{ +#if USE_GTS + clear_bit(TXQ_LAST_PKT_DB, &q->flags); + if (test_and_set_bit(TXQ_RUNNING, &q->flags) == 0) { + set_bit(TXQ_LAST_PKT_DB, &q->flags); + t3_write_reg(adap, A_SG_KDOORBELL, + F_SELEGRCNTX | V_EGRCNTX(q->cntxt_id)); + } +#else + wmb(); /* write descriptors before telling HW */ + t3_write_reg(adap, A_SG_KDOORBELL, + F_SELEGRCNTX | V_EGRCNTX(q->cntxt_id)); +#endif +} + +static inline void wr_gen2(struct tx_desc *d, unsigned int gen) +{ +#if SGE_NUM_GENBITS == 2 + d->flit[TX_DESC_FLITS - 1] = cpu_to_be64(gen); +#endif +} + +/** + * write_wr_hdr_sgl - write a WR header and, optionally, SGL + * @ndesc: number of Tx descriptors spanned by the SGL + * @skb: the packet corresponding to the WR + * @d: first Tx descriptor to be written + * @pidx: index of above descriptors + * @q: the SGE Tx queue + * @sgl: the SGL + * @flits: number of flits to the start of the SGL in the first descriptor + * @sgl_flits: the SGL size in flits + * @gen: the Tx descriptor generation + * @wr_hi: top 32 bits of WR header based on WR type (big endian) + * @wr_lo: low 32 bits of WR header based on WR type (big endian) + * + * Write a work request header and an associated SGL. If the SGL is + * small enough to fit into one Tx descriptor it has already been written + * and we just need to write the WR header. Otherwise we distribute the + * SGL across the number of descriptors it spans. + */ +static void write_wr_hdr_sgl(unsigned int ndesc, struct sk_buff *skb, + struct tx_desc *d, unsigned int pidx, + const struct sge_txq *q, + const struct sg_ent *sgl, + unsigned int flits, unsigned int sgl_flits, + unsigned int gen, unsigned int wr_hi, + unsigned int wr_lo) +{ + struct work_request_hdr *wrp = (struct work_request_hdr *)d; + struct tx_sw_desc *sd = &q->sdesc[pidx]; + + sd->skb = skb; + if (need_skb_unmap()) { + struct unmap_info *ui = (struct unmap_info *)skb->cb; + + ui->fragidx = 0; + ui->addr_idx = 0; + ui->sflit = flits; + } + + if (likely(ndesc == 1)) { + skb->priority = pidx; + wrp->wr_hi = htonl(F_WR_SOP | F_WR_EOP | V_WR_DATATYPE(1) | + V_WR_SGLSFLT(flits)) | wr_hi; + wmb(); + wrp->wr_lo = htonl(V_WR_LEN(flits + sgl_flits) | + V_WR_GEN(gen)) | wr_lo; + wr_gen2(d, gen); + } else { + unsigned int ogen = gen; + const u64 *fp = (const u64 *)sgl; + struct work_request_hdr *wp = wrp; + + wrp->wr_hi = htonl(F_WR_SOP | V_WR_DATATYPE(1) | + V_WR_SGLSFLT(flits)) | wr_hi; + + while (sgl_flits) { + unsigned int avail = WR_FLITS - flits; + + if (avail > sgl_flits) + avail = sgl_flits; + memcpy(&d->flit[flits], fp, avail * sizeof(*fp)); + sgl_flits -= avail; + ndesc--; + if (!sgl_flits) + break; + + fp += avail; + d++; + sd++; + if (++pidx == q->size) { + pidx = 0; + gen ^= 1; + d = q->desc; + sd = q->sdesc; + } + + sd->skb = skb; + wrp = (struct work_request_hdr *)d; + wrp->wr_hi = htonl(V_WR_DATATYPE(1) | + V_WR_SGLSFLT(1)) | wr_hi; + wrp->wr_lo = htonl(V_WR_LEN(min(WR_FLITS, + sgl_flits + 1)) | + V_WR_GEN(gen)) | wr_lo; + wr_gen2(d, gen); + flits = 1; + } + skb->priority = pidx; + wrp->wr_hi |= htonl(F_WR_EOP); + wmb(); + wp->wr_lo = htonl(V_WR_LEN(WR_FLITS) | V_WR_GEN(ogen)) | wr_lo; + wr_gen2((struct tx_desc *)wp, ogen); + WARN_ON(ndesc != 0); + } +} + +/** + * write_tx_pkt_wr - write a TX_PKT work request + * @adap: the adapter + * @skb: the packet to send + * @pi: the egress interface + * @pidx: index of the first Tx descriptor to write + * @gen: the generation value to use + * @q: the Tx queue + * @ndesc: number of descriptors the packet will occupy + * @compl: the value of the COMPL bit to use + * + * Generate a TX_PKT work request to send the supplied packet. + */ +static void write_tx_pkt_wr(struct adapter *adap, struct sk_buff *skb, + const struct port_info *pi, + unsigned int pidx, unsigned int gen, + struct sge_txq *q, unsigned int ndesc, + unsigned int compl) +{ + unsigned int flits, sgl_flits, cntrl, tso_info; + struct sg_ent *sgp, sgl[MAX_SKB_FRAGS / 2 + 1]; + struct tx_desc *d = &q->desc[pidx]; + struct cpl_tx_pkt *cpl = (struct cpl_tx_pkt *)d; + + cpl->len = htonl(skb->len | 0x80000000); + cntrl = V_TXPKT_INTF(pi->port_id); + + if (vlan_tx_tag_present(skb) && pi->vlan_grp) + cntrl |= F_TXPKT_VLAN_VLD | V_TXPKT_VLAN(vlan_tx_tag_get(skb)); + + tso_info = V_LSO_MSS(skb_shinfo(skb)->gso_size); + if (tso_info) { + int eth_type; + struct cpl_tx_pkt_lso *hdr = (struct cpl_tx_pkt_lso *)cpl; + + d->flit[2] = 0; + cntrl |= V_TXPKT_OPCODE(CPL_TX_PKT_LSO); + hdr->cntrl = htonl(cntrl); + eth_type = skb->nh.raw - skb->data == ETH_HLEN ? + CPL_ETH_II : CPL_ETH_II_VLAN; + tso_info |= V_LSO_ETH_TYPE(eth_type) | + V_LSO_IPHDR_WORDS(skb->nh.iph->ihl) | + V_LSO_TCPHDR_WORDS(skb->h.th->doff); + hdr->lso_info = htonl(tso_info); + flits = 3; + } else { + cntrl |= V_TXPKT_OPCODE(CPL_TX_PKT); + cntrl |= F_TXPKT_IPCSUM_DIS; /* SW calculates IP csum */ + cntrl |= V_TXPKT_L4CSUM_DIS(skb->ip_summed != CHECKSUM_PARTIAL); + cpl->cntrl = htonl(cntrl); + + if (skb->len <= WR_LEN - sizeof(*cpl)) { + q->sdesc[pidx].skb = NULL; + if (!skb->data_len) + memcpy(&d->flit[2], skb->data, skb->len); + else + skb_copy_bits(skb, 0, &d->flit[2], skb->len); + + flits = (skb->len + 7) / 8 + 2; + cpl->wr.wr_hi = htonl(V_WR_BCNTLFLT(skb->len & 7) | + V_WR_OP(FW_WROPCODE_TUNNEL_TX_PKT) + | F_WR_SOP | F_WR_EOP | compl); + wmb(); + cpl->wr.wr_lo = htonl(V_WR_LEN(flits) | V_WR_GEN(gen) | + V_WR_TID(q->token)); + wr_gen2(d, gen); + kfree_skb(skb); + return; + } + + flits = 2; + } + + sgp = ndesc == 1 ? (struct sg_ent *)&d->flit[flits] : sgl; + sgl_flits = make_sgl(skb, sgp, skb->data, skb_headlen(skb), adap->pdev); + if (need_skb_unmap()) + ((struct unmap_info *)skb->cb)->len = skb_headlen(skb); + + write_wr_hdr_sgl(ndesc, skb, d, pidx, q, sgl, flits, sgl_flits, gen, + htonl(V_WR_OP(FW_WROPCODE_TUNNEL_TX_PKT) | compl), + htonl(V_WR_TID(q->token))); +} + +/** + * eth_xmit - add a packet to the Ethernet Tx queue + * @skb: the packet + * @dev: the egress net device + * + * Add a packet to an SGE Tx queue. Runs with softirqs disabled. + */ +int t3_eth_xmit(struct sk_buff *skb, struct net_device *dev) +{ + unsigned int ndesc, pidx, credits, gen, compl; + const struct port_info *pi = netdev_priv(dev); + struct adapter *adap = dev->priv; + struct sge_qset *qs = dev2qset(dev); + struct sge_txq *q = &qs->txq[TXQ_ETH]; + + /* + * The chip min packet length is 9 octets but play safe and reject + * anything shorter than an Ethernet header. + */ + if (unlikely(skb->len < ETH_HLEN)) { + dev_kfree_skb(skb); + return NETDEV_TX_OK; + } + + spin_lock(&q->lock); + reclaim_completed_tx(adap, q); + + credits = q->size - q->in_use; + ndesc = calc_tx_descs(skb); + + if (unlikely(credits < ndesc)) { + if (!netif_queue_stopped(dev)) { + netif_stop_queue(dev); + set_bit(TXQ_ETH, &qs->txq_stopped); + q->stops++; + dev_err(&adap->pdev->dev, + "%s: Tx ring %u full while queue awake!\n", + dev->name, q->cntxt_id & 7); + } + spin_unlock(&q->lock); + return NETDEV_TX_BUSY; + } + + q->in_use += ndesc; + if (unlikely(credits - ndesc < q->stop_thres)) { + q->stops++; + netif_stop_queue(dev); + set_bit(TXQ_ETH, &qs->txq_stopped); +#if !USE_GTS + if (should_restart_tx(q) && + test_and_clear_bit(TXQ_ETH, &qs->txq_stopped)) { + q->restarts++; + netif_wake_queue(dev); + } +#endif + } + + gen = q->gen; + q->unacked += ndesc; + compl = (q->unacked & 8) << (S_WR_COMPL - 3); + q->unacked &= 7; + pidx = q->pidx; + q->pidx += ndesc; + if (q->pidx >= q->size) { + q->pidx -= q->size; + q->gen ^= 1; + } + + /* update port statistics */ + if (skb->ip_summed == CHECKSUM_COMPLETE) + qs->port_stats[SGE_PSTAT_TX_CSUM]++; + if (skb_shinfo(skb)->gso_size) + qs->port_stats[SGE_PSTAT_TSO]++; + if (vlan_tx_tag_present(skb) && pi->vlan_grp) + qs->port_stats[SGE_PSTAT_VLANINS]++; + + dev->trans_start = jiffies; + spin_unlock(&q->lock); + + /* + * We do not use Tx completion interrupts to free DMAd Tx packets. + * This is good for performamce but means that we rely on new Tx + * packets arriving to run the destructors of completed packets, + * which open up space in their sockets' send queues. Sometimes + * we do not get such new packets causing Tx to stall. A single + * UDP transmitter is a good example of this situation. We have + * a clean up timer that periodically reclaims completed packets + * but it doesn't run often enough (nor do we want it to) to prevent + * lengthy stalls. A solution to this problem is to run the + * destructor early, after the packet is queued but before it's DMAd. + * A cons is that we lie to socket memory accounting, but the amount + * of extra memory is reasonable (limited by the number of Tx + * descriptors), the packets do actually get freed quickly by new + * packets almost always, and for protocols like TCP that wait for + * acks to really free up the data the extra memory is even less. + * On the positive side we run the destructors on the sending CPU + * rather than on a potentially different completing CPU, usually a + * good thing. We also run them without holding our Tx queue lock, + * unlike what reclaim_completed_tx() would otherwise do. + * + * Run the destructor before telling the DMA engine about the packet + * to make sure it doesn't complete and get freed prematurely. + */ + if (likely(!skb_shared(skb))) + skb_orphan(skb); + + write_tx_pkt_wr(adap, skb, pi, pidx, gen, q, ndesc, compl); + check_ring_tx_db(adap, q); + return NETDEV_TX_OK; +} + +/** + * write_imm - write a packet into a Tx descriptor as immediate data + * @d: the Tx descriptor to write + * @skb: the packet + * @len: the length of packet data to write as immediate data + * @gen: the generation bit value to write + * + * Writes a packet as immediate data into a Tx descriptor. The packet + * contains a work request at its beginning. We must write the packet + * carefully so the SGE doesn't read accidentally before it's written in + * its entirety. + */ +static inline void write_imm(struct tx_desc *d, struct sk_buff *skb, + unsigned int len, unsigned int gen) +{ + struct work_request_hdr *from = (struct work_request_hdr *)skb->data; + struct work_request_hdr *to = (struct work_request_hdr *)d; + + memcpy(&to[1], &from[1], len - sizeof(*from)); + to->wr_hi = from->wr_hi | htonl(F_WR_SOP | F_WR_EOP | + V_WR_BCNTLFLT(len & 7)); + wmb(); + to->wr_lo = from->wr_lo | htonl(V_WR_GEN(gen) | + V_WR_LEN((len + 7) / 8)); + wr_gen2(d, gen); + kfree_skb(skb); +} + +/** + * check_desc_avail - check descriptor availability on a send queue + * @adap: the adapter + * @q: the send queue + * @skb: the packet needing the descriptors + * @ndesc: the number of Tx descriptors needed + * @qid: the Tx queue number in its queue set (TXQ_OFLD or TXQ_CTRL) + * + * Checks if the requested number of Tx descriptors is available on an + * SGE send queue. If the queue is already suspended or not enough + * descriptors are available the packet is queued for later transmission. + * Must be called with the Tx queue locked. + * + * Returns 0 if enough descriptors are available, 1 if there aren't + * enough descriptors and the packet has been queued, and 2 if the caller + * needs to retry because there weren't enough descriptors at the + * beginning of the call but some freed up in the mean time. + */ +static inline int check_desc_avail(struct adapter *adap, struct sge_txq *q, + struct sk_buff *skb, unsigned int ndesc, + unsigned int qid) +{ + if (unlikely(!skb_queue_empty(&q->sendq))) { + addq_exit:__skb_queue_tail(&q->sendq, skb); + return 1; + } + if (unlikely(q->size - q->in_use < ndesc)) { + struct sge_qset *qs = txq_to_qset(q, qid); + + set_bit(qid, &qs->txq_stopped); + smp_mb__after_clear_bit(); + + if (should_restart_tx(q) && + test_and_clear_bit(qid, &qs->txq_stopped)) + return 2; + + q->stops++; + goto addq_exit; + } + return 0; +} + +/** + * reclaim_completed_tx_imm - reclaim completed control-queue Tx descs + * @q: the SGE control Tx queue + * + * This is a variant of reclaim_completed_tx() that is used for Tx queues + * that send only immediate data (presently just the control queues) and + * thus do not have any sk_buffs to release. + */ +static inline void reclaim_completed_tx_imm(struct sge_txq *q) +{ + unsigned int reclaim = q->processed - q->cleaned; + + q->in_use -= reclaim; + q->cleaned += reclaim; +} + +static inline int immediate(const struct sk_buff *skb) +{ + return skb->len <= WR_LEN && !skb->data_len; +} + +/** + * ctrl_xmit - send a packet through an SGE control Tx queue + * @adap: the adapter + * @q: the control queue + * @skb: the packet + * + * Send a packet through an SGE control Tx queue. Packets sent through + * a control queue must fit entirely as immediate data in a single Tx + * descriptor and have no page fragments. + */ +static int ctrl_xmit(struct adapter *adap, struct sge_txq *q, + struct sk_buff *skb) +{ + int ret; + struct work_request_hdr *wrp = (struct work_request_hdr *)skb->data; + + if (unlikely(!immediate(skb))) { + WARN_ON(1); + dev_kfree_skb(skb); + return NET_XMIT_SUCCESS; + } + + wrp->wr_hi |= htonl(F_WR_SOP | F_WR_EOP); + wrp->wr_lo = htonl(V_WR_TID(q->token)); + + spin_lock(&q->lock); + again:reclaim_completed_tx_imm(q); + + ret = check_desc_avail(adap, q, skb, 1, TXQ_CTRL); + if (unlikely(ret)) { + if (ret == 1) { + spin_unlock(&q->lock); + return NET_XMIT_CN; + } + goto again; + } + + write_imm(&q->desc[q->pidx], skb, skb->len, q->gen); + + q->in_use++; + if (++q->pidx >= q->size) { + q->pidx = 0; + q->gen ^= 1; + } + spin_unlock(&q->lock); + wmb(); + t3_write_reg(adap, A_SG_KDOORBELL, + F_SELEGRCNTX | V_EGRCNTX(q->cntxt_id)); + return NET_XMIT_SUCCESS; +} + +/** + * restart_ctrlq - restart a suspended control queue + * @qs: the queue set cotaining the control queue + * + * Resumes transmission on a suspended Tx control queue. + */ +static void restart_ctrlq(unsigned long data) +{ + struct sk_buff *skb; + struct sge_qset *qs = (struct sge_qset *)data; + struct sge_txq *q = &qs->txq[TXQ_CTRL]; + struct adapter *adap = qs->netdev->priv; + + spin_lock(&q->lock); + again:reclaim_completed_tx_imm(q); + + while (q->in_use < q->size && (skb = __skb_dequeue(&q->sendq)) != NULL) { + + write_imm(&q->desc[q->pidx], skb, skb->len, q->gen); + + if (++q->pidx >= q->size) { + q->pidx = 0; + q->gen ^= 1; + } + q->in_use++; + } + + if (!skb_queue_empty(&q->sendq)) { + set_bit(TXQ_CTRL, &qs->txq_stopped); + smp_mb__after_clear_bit(); + + if (should_restart_tx(q) && + test_and_clear_bit(TXQ_CTRL, &qs->txq_stopped)) + goto again; + q->stops++; + } + + spin_unlock(&q->lock); + t3_write_reg(adap, A_SG_KDOORBELL, + F_SELEGRCNTX | V_EGRCNTX(q->cntxt_id)); +} + +/** + * write_ofld_wr - write an offload work request + * @adap: the adapter + * @skb: the packet to send + * @q: the Tx queue + * @pidx: index of the first Tx descriptor to write + * @gen: the generation value to use + * @ndesc: number of descriptors the packet will occupy + * + * Write an offload work request to send the supplied packet. The packet + * data already carry the work request with most fields populated. + */ +static void write_ofld_wr(struct adapter *adap, struct sk_buff *skb, + struct sge_txq *q, unsigned int pidx, + unsigned int gen, unsigned int ndesc) +{ + unsigned int sgl_flits, flits; + struct work_request_hdr *from; + struct sg_ent *sgp, sgl[MAX_SKB_FRAGS / 2 + 1]; + struct tx_desc *d = &q->desc[pidx]; + + if (immediate(skb)) { + q->sdesc[pidx].skb = NULL; + write_imm(d, skb, skb->len, gen); + return; + } + + /* Only TX_DATA builds SGLs */ + + from = (struct work_request_hdr *)skb->data; + memcpy(&d->flit[1], &from[1], skb->h.raw - skb->data - sizeof(*from)); + + flits = (skb->h.raw - skb->data) / 8; + sgp = ndesc == 1 ? (struct sg_ent *)&d->flit[flits] : sgl; + sgl_flits = make_sgl(skb, sgp, skb->h.raw, skb->tail - skb->h.raw, + adap->pdev); + if (need_skb_unmap()) + ((struct unmap_info *)skb->cb)->len = skb->tail - skb->h.raw; + + write_wr_hdr_sgl(ndesc, skb, d, pidx, q, sgl, flits, sgl_flits, + gen, from->wr_hi, from->wr_lo); +} + +/** + * calc_tx_descs_ofld - calculate # of Tx descriptors for an offload packet + * @skb: the packet + * + * Returns the number of Tx descriptors needed for the given offload + * packet. These packets are already fully constructed. + */ +static inline unsigned int calc_tx_descs_ofld(const struct sk_buff *skb) +{ + unsigned int flits, cnt = skb_shinfo(skb)->nr_frags; + + if (skb->len <= WR_LEN && cnt == 0) + return 1; /* packet fits as immediate data */ + + flits = (skb->h.raw - skb->data) / 8; /* headers */ + if (skb->tail != skb->h.raw) + cnt++; + return flits_to_desc(flits + sgl_len(cnt)); +} + +/** + * ofld_xmit - send a packet through an offload queue + * @adap: the adapter + * @q: the Tx offload queue + * @skb: the packet + * + * Send an offload packet through an SGE offload queue. + */ +static int ofld_xmit(struct adapter *adap, struct sge_txq *q, + struct sk_buff *skb) +{ + int ret; + unsigned int ndesc = calc_tx_descs_ofld(skb), pidx, gen; + + spin_lock(&q->lock); + again:reclaim_completed_tx(adap, q); + + ret = check_desc_avail(adap, q, skb, ndesc, TXQ_OFLD); + if (unlikely(ret)) { + if (ret == 1) { + skb->priority = ndesc; /* save for restart */ + spin_unlock(&q->lock); + return NET_XMIT_CN; + } + goto again; + } + + gen = q->gen; + q->in_use += ndesc; + pidx = q->pidx; + q->pidx += ndesc; + if (q->pidx >= q->size) { + q->pidx -= q->size; + q->gen ^= 1; + } + spin_unlock(&q->lock); + + write_ofld_wr(adap, skb, q, pidx, gen, ndesc); + check_ring_tx_db(adap, q); + return NET_XMIT_SUCCESS; +} + +/** + * restart_offloadq - restart a suspended offload queue + * @qs: the queue set cotaining the offload queue + * + * Resumes transmission on a suspended Tx offload queue. + */ +static void restart_offloadq(unsigned long data) +{ + struct sk_buff *skb; + struct sge_qset *qs = (struct sge_qset *)data; + struct sge_txq *q = &qs->txq[TXQ_OFLD]; + struct adapter *adap = qs->netdev->priv; + + spin_lock(&q->lock); + again:reclaim_completed_tx(adap, q); + + while ((skb = skb_peek(&q->sendq)) != NULL) { + unsigned int gen, pidx; + unsigned int ndesc = skb->priority; + + if (unlikely(q->size - q->in_use < ndesc)) { + set_bit(TXQ_OFLD, &qs->txq_stopped); + smp_mb__after_clear_bit(); + + if (should_restart_tx(q) && + test_and_clear_bit(TXQ_OFLD, &qs->txq_stopped)) + goto again; + q->stops++; + break; + } + + gen = q->gen; + q->in_use += ndesc; + pidx = q->pidx; + q->pidx += ndesc; + if (q->pidx >= q->size) { + q->pidx -= q->size; + q->gen ^= 1; + } + __skb_unlink(skb, &q->sendq); + spin_unlock(&q->lock); + + write_ofld_wr(adap, skb, q, pidx, gen, ndesc); + spin_lock(&q->lock); + } + spin_unlock(&q->lock); + +#if USE_GTS + set_bit(TXQ_RUNNING, &q->flags); + set_bit(TXQ_LAST_PKT_DB, &q->flags); +#endif + t3_write_reg(adap, A_SG_KDOORBELL, + F_SELEGRCNTX | V_EGRCNTX(q->cntxt_id)); +} + +/** + * queue_set - return the queue set a packet should use + * @skb: the packet + * + * Maps a packet to the SGE queue set it should use. The desired queue + * set is carried in bits 1-3 in the packet's priority. + */ +static inline int queue_set(const struct sk_buff *skb) +{ + return skb->priority >> 1; +} + +/** + * is_ctrl_pkt - return whether an offload packet is a control packet + * @skb: the packet + * + * Determines whether an offload packet should use an OFLD or a CTRL + * Tx queue. This is indicated by bit 0 in the packet's priority. + */ +static inline int is_ctrl_pkt(const struct sk_buff *skb) +{ + return skb->priority & 1; +} + +/** + * t3_offload_tx - send an offload packet + * @tdev: the offload device to send to + * @skb: the packet + * + * Sends an offload packet. We use the packet priority to select the + * appropriate Tx queue as follows: bit 0 indicates whether the packet + * should be sent as regular or control, bits 1-3 select the queue set. + */ +int t3_offload_tx(struct t3cdev *tdev, struct sk_buff *skb) +{ + struct adapter *adap = tdev2adap(tdev); + struct sge_qset *qs = &adap->sge.qs[queue_set(skb)]; + + if (unlikely(is_ctrl_pkt(skb))) + return ctrl_xmit(adap, &qs->txq[TXQ_CTRL], skb); + + return ofld_xmit(adap, &qs->txq[TXQ_OFLD], skb); +} + +/** + * offload_enqueue - add an offload packet to an SGE offload receive queue + * @q: the SGE response queue + * @skb: the packet + * + * Add a new offload packet to an SGE response queue's offload packet + * queue. If the packet is the first on the queue it schedules the RX + * softirq to process the queue. + */ +static inline void offload_enqueue(struct sge_rspq *q, struct sk_buff *skb) +{ + skb->next = skb->prev = NULL; + if (q->rx_tail) + q->rx_tail->next = skb; + else { + struct sge_qset *qs = rspq_to_qset(q); + + if (__netif_rx_schedule_prep(qs->netdev)) + __netif_rx_schedule(qs->netdev); + q->rx_head = skb; + } + q->rx_tail = skb; +} + +/** + * deliver_partial_bundle - deliver a (partial) bundle of Rx offload pkts + * @tdev: the offload device that will be receiving the packets + * @q: the SGE response queue that assembled the bundle + * @skbs: the partial bundle + * @n: the number of packets in the bundle + * + * Delivers a (partial) bundle of Rx offload packets to an offload device. + */ +static inline void deliver_partial_bundle(struct t3cdev *tdev, + struct sge_rspq *q, + struct sk_buff *skbs[], int n) +{ + if (n) { + q->offload_bundles++; + tdev->recv(tdev, skbs, n); + } +} + +/** + * ofld_poll - NAPI handler for offload packets in interrupt mode + * @dev: the network device doing the polling + * @budget: polling budget + * + * The NAPI handler for offload packets when a response queue is serviced + * by the hard interrupt handler, i.e., when it's operating in non-polling + * mode. Creates small packet batches and sends them through the offload + * receive handler. Batches need to be of modest size as we do prefetches + * on the packets in each. + */ +static int ofld_poll(struct net_device *dev, int *budget) +{ + struct adapter *adapter = dev->priv; + struct sge_qset *qs = dev2qset(dev); + struct sge_rspq *q = &qs->rspq; + int work_done, limit = min(*budget, dev->quota), avail = limit; + + while (avail) { + struct sk_buff *head, *tail, *skbs[RX_BUNDLE_SIZE]; + int ngathered; + + spin_lock_irq(&q->lock); + head = q->rx_head; + if (!head) { + work_done = limit - avail; + *budget -= work_done; + dev->quota -= work_done; + __netif_rx_complete(dev); + spin_unlock_irq(&q->lock); + return 0; + } + + tail = q->rx_tail; + q->rx_head = q->rx_tail = NULL; + spin_unlock_irq(&q->lock); + + for (ngathered = 0; avail && head; avail--) { + prefetch(head->data); + skbs[ngathered] = head; + head = head->next; + skbs[ngathered]->next = NULL; + if (++ngathered == RX_BUNDLE_SIZE) { + q->offload_bundles++; + adapter->tdev.recv(&adapter->tdev, skbs, + ngathered); + ngathered = 0; + } + } + if (head) { /* splice remaining packets back onto Rx queue */ + spin_lock_irq(&q->lock); + tail->next = q->rx_head; + if (!q->rx_head) + q->rx_tail = tail; + q->rx_head = head; + spin_unlock_irq(&q->lock); + } + deliver_partial_bundle(&adapter->tdev, q, skbs, ngathered); + } + work_done = limit - avail; + *budget -= work_done; + dev->quota -= work_done; + return 1; +} + +/** + * rx_offload - process a received offload packet + * @tdev: the offload device receiving the packet + * @rq: the response queue that received the packet + * @skb: the packet + * @rx_gather: a gather list of packets if we are building a bundle + * @gather_idx: index of the next available slot in the bundle + * + * Process an ingress offload pakcet and add it to the offload ingress + * queue. Returns the index of the next available slot in the bundle. + */ +static inline int rx_offload(struct t3cdev *tdev, struct sge_rspq *rq, + struct sk_buff *skb, struct sk_buff *rx_gather[], + unsigned int gather_idx) +{ + rq->offload_pkts++; + skb->mac.raw = skb->nh.raw = skb->h.raw = skb->data; + + if (rq->polling) { + rx_gather[gather_idx++] = skb; + if (gather_idx == RX_BUNDLE_SIZE) { + tdev->recv(tdev, rx_gather, RX_BUNDLE_SIZE); + gather_idx = 0; + rq->offload_bundles++; + } + } else + offload_enqueue(rq, skb); + + return gather_idx; +} + +/** + * update_tx_completed - update the number of processed Tx descriptors + * @qs: the queue set to update + * @idx: which Tx queue within the set to update + * @credits: number of new processed descriptors + * @tx_completed: accumulates credits for the queues + * + * Updates the number of completed Tx descriptors for a queue set's Tx + * queue. On UP systems we updated the information immediately but on + * MP we accumulate the credits locally and update the Tx queue when we + * reach a threshold to avoid cache-line bouncing. + */ +static inline void update_tx_completed(struct sge_qset *qs, int idx, + unsigned int credits, + unsigned int tx_completed[]) +{ +#ifdef CONFIG_SMP + tx_completed[idx] += credits; + if (tx_completed[idx] > 32) { + qs->txq[idx].processed += tx_completed[idx]; + tx_completed[idx] = 0; + } +#else + qs->txq[idx].processed += credits; +#endif +} + +/** + * restart_tx - check whether to restart suspended Tx queues + * @qs: the queue set to resume + * + * Restarts suspended Tx queues of an SGE queue set if they have enough + * free resources to resume operation. + */ +static void restart_tx(struct sge_qset *qs) +{ + if (test_bit(TXQ_ETH, &qs->txq_stopped) && + should_restart_tx(&qs->txq[TXQ_ETH]) && + test_and_clear_bit(TXQ_ETH, &qs->txq_stopped)) { + qs->txq[TXQ_ETH].restarts++; + if (netif_running(qs->netdev)) + netif_wake_queue(qs->netdev); + } + + if (test_bit(TXQ_OFLD, &qs->txq_stopped) && + should_restart_tx(&qs->txq[TXQ_OFLD]) && + test_and_clear_bit(TXQ_OFLD, &qs->txq_stopped)) { + qs->txq[TXQ_OFLD].restarts++; + tasklet_schedule(&qs->txq[TXQ_OFLD].qresume_tsk); + } + if (test_bit(TXQ_CTRL, &qs->txq_stopped) && + should_restart_tx(&qs->txq[TXQ_CTRL]) && + test_and_clear_bit(TXQ_CTRL, &qs->txq_stopped)) { + qs->txq[TXQ_CTRL].restarts++; + tasklet_schedule(&qs->txq[TXQ_CTRL].qresume_tsk); + } +} + +/** + * rx_eth - process an ingress ethernet packet + * @adap: the adapter + * @rq: the response queue that received the packet + * @skb: the packet + * @pad: amount of padding at the start of the buffer + * + * Process an ingress ethernet pakcet and deliver it to the stack. + * The padding is 2 if the packet was delivered in an Rx buffer and 0 + * if it was immediate data in a response. + */ +static void rx_eth(struct adapter *adap, struct sge_rspq *rq, + struct sk_buff *skb, int pad) +{ + struct cpl_rx_pkt *p = (struct cpl_rx_pkt *)(skb->data + pad); + struct port_info *pi; + + rq->eth_pkts++; + skb_pull(skb, sizeof(*p) + pad); + skb->dev = adap->port[p->iff]; + skb->dev->last_rx = jiffies; + skb->protocol = eth_type_trans(skb, skb->dev); + pi = netdev_priv(skb->dev); + if (pi->rx_csum_offload && p->csum_valid && p->csum == 0xffff && + !p->fragment) { + rspq_to_qset(rq)->port_stats[SGE_PSTAT_RX_CSUM_GOOD]++; + skb->ip_summed = CHECKSUM_UNNECESSARY; + } else + skb->ip_summed = CHECKSUM_NONE; + + if (unlikely(p->vlan_valid)) { + struct vlan_group *grp = pi->vlan_grp; + + rspq_to_qset(rq)->port_stats[SGE_PSTAT_VLANEX]++; + if (likely(grp)) + __vlan_hwaccel_rx(skb, grp, ntohs(p->vlan), + rq->polling); + else + dev_kfree_skb_any(skb); + } else if (rq->polling) + netif_receive_skb(skb); + else + netif_rx(skb); +} + +/** + * handle_rsp_cntrl_info - handles control information in a response + * @qs: the queue set corresponding to the response + * @flags: the response control flags + * @tx_completed: accumulates completion credits for the Tx queues + * + * Handles the control information of an SGE response, such as GTS + * indications and completion credits for the queue set's Tx queues. + */ +static inline void handle_rsp_cntrl_info(struct sge_qset *qs, u32 flags, + unsigned int tx_completed[]) +{ + unsigned int credits; + +#if USE_GTS + if (flags & F_RSPD_TXQ0_GTS) + clear_bit(TXQ_RUNNING, &qs->txq[TXQ_ETH].flags); +#endif + + /* ETH credits are already coalesced, return them immediately. */ + credits = G_RSPD_TXQ0_CR(flags); + if (credits) + qs->txq[TXQ_ETH].processed += credits; + +# if USE_GTS + if (flags & F_RSPD_TXQ1_GTS) + clear_bit(TXQ_RUNNING, &qs->txq[TXQ_OFLD].flags); +# endif + update_tx_completed(qs, TXQ_OFLD, G_RSPD_TXQ1_CR(flags), tx_completed); + update_tx_completed(qs, TXQ_CTRL, G_RSPD_TXQ2_CR(flags), tx_completed); +} + +/** + * flush_tx_completed - returns accumulated Tx completions to Tx queues + * @qs: the queue set to update + * @tx_completed: pending completion credits to return to Tx queues + * + * Updates the number of completed Tx descriptors for a queue set's Tx + * queues with the credits pending in @tx_completed. This does something + * only on MP systems as on UP systems we return the credits immediately. + */ +static inline void flush_tx_completed(struct sge_qset *qs, + unsigned int tx_completed[]) +{ +#if defined(CONFIG_SMP) + if (tx_completed[TXQ_OFLD]) + qs->txq[TXQ_OFLD].processed += tx_completed[TXQ_OFLD]; + if (tx_completed[TXQ_CTRL]) + qs->txq[TXQ_CTRL].processed += tx_completed[TXQ_CTRL]; +#endif +} + +/** + * check_ring_db - check if we need to ring any doorbells + * @adapter: the adapter + * @qs: the queue set whose Tx queues are to be examined + * @sleeping: indicates which Tx queue sent GTS + * + * Checks if some of a queue set's Tx queues need to ring their doorbells + * to resume transmission after idling while they still have unprocessed + * descriptors. + */ +static void check_ring_db(struct adapter *adap, struct sge_qset *qs, + unsigned int sleeping) +{ + if (sleeping & F_RSPD_TXQ0_GTS) { + struct sge_txq *txq = &qs->txq[TXQ_ETH]; + + if (txq->cleaned + txq->in_use != txq->processed && + !test_and_set_bit(TXQ_LAST_PKT_DB, &txq->flags)) { + set_bit(TXQ_RUNNING, &txq->flags); + t3_write_reg(adap, A_SG_KDOORBELL, F_SELEGRCNTX | + V_EGRCNTX(txq->cntxt_id)); + } + } + + if (sleeping & F_RSPD_TXQ1_GTS) { + struct sge_txq *txq = &qs->txq[TXQ_OFLD]; + + if (txq->cleaned + txq->in_use != txq->processed && + !test_and_set_bit(TXQ_LAST_PKT_DB, &txq->flags)) { + set_bit(TXQ_RUNNING, &txq->flags); + t3_write_reg(adap, A_SG_KDOORBELL, F_SELEGRCNTX | + V_EGRCNTX(txq->cntxt_id)); + } + } +} + +/** + * is_new_response - check if a response is newly written + * @r: the response descriptor + * @q: the response queue + * + * Returns true if a response descriptor contains a yet unprocessed + * response. + */ +static inline int is_new_response(const struct rsp_desc *r, + const struct sge_rspq *q) +{ + return (r->intr_gen & F_RSPD_GEN2) == q->gen; +} + +#define RSPD_GTS_MASK (F_RSPD_TXQ0_GTS | F_RSPD_TXQ1_GTS) +#define RSPD_CTRL_MASK (RSPD_GTS_MASK | \ + V_RSPD_TXQ0_CR(M_RSPD_TXQ0_CR) | \ + V_RSPD_TXQ1_CR(M_RSPD_TXQ1_CR) | \ + V_RSPD_TXQ2_CR(M_RSPD_TXQ2_CR)) + +/* How long to delay the next interrupt in case of memory shortage, in 0.1us. */ +#define NOMEM_INTR_DELAY 2500 + +/** + * process_responses - process responses from an SGE response queue + * @adap: the adapter + * @qs: the queue set to which the response queue belongs + * @budget: how many responses can be processed in this round + * + * Process responses from an SGE response queue up to the supplied budget. + * Responses include received packets as well as credits and other events + * for the queues that belong to the response queue's queue set. + * A negative budget is effectively unlimited. + * + * Additionally choose the interrupt holdoff time for the next interrupt + * on this queue. If the system is under memory shortage use a fairly + * long delay to help recovery. + */ +static int process_responses(struct adapter *adap, struct sge_qset *qs, + int budget) +{ + struct sge_rspq *q = &qs->rspq; + struct rsp_desc *r = &q->desc[q->cidx]; + int budget_left = budget; + unsigned int sleeping = 0, tx_completed[3] = { 0, 0, 0 }; + struct sk_buff *offload_skbs[RX_BUNDLE_SIZE]; + int ngathered = 0; + + q->next_holdoff = q->holdoff_tmr; + + while (likely(budget_left && is_new_response(r, q))) { + int eth, ethpad = 0; + struct sk_buff *skb = NULL; + u32 len, flags = ntohl(r->flags); + u32 rss_hi = *(const u32 *)r, rss_lo = r->rss_hdr.rss_hash_val; + + eth = r->rss_hdr.opcode == CPL_RX_PKT; + + if (unlikely(flags & F_RSPD_ASYNC_NOTIF)) { + skb = alloc_skb(AN_PKT_SIZE, GFP_ATOMIC); + if (!skb) + goto no_mem; + + memcpy(__skb_put(skb, AN_PKT_SIZE), r, AN_PKT_SIZE); + skb->data[0] = CPL_ASYNC_NOTIF; + rss_hi = htonl(CPL_ASYNC_NOTIF << 24); + q->async_notif++; + } else if (flags & F_RSPD_IMM_DATA_VALID) { + skb = get_imm_packet(r); + if (unlikely(!skb)) { + no_mem: + q->next_holdoff = NOMEM_INTR_DELAY; + q->nomem++; + /* consume one credit since we tried */ + budget_left--; + break; + } + q->imm_data++; + } else if ((len = ntohl(r->len_cq)) != 0) { + struct sge_fl *fl; + + fl = (len & F_RSPD_FLQ) ? &qs->fl[1] : &qs->fl[0]; + fl->credits--; + skb = get_packet(adap, fl, G_RSPD_LEN(len), + eth ? SGE_RX_DROP_THRES : 0); + if (!skb) + q->rx_drops++; + else if (r->rss_hdr.opcode == CPL_TRACE_PKT) + __skb_pull(skb, 2); + ethpad = 2; + if (++fl->cidx == fl->size) + fl->cidx = 0; + } else + q->pure_rsps++; + + if (flags & RSPD_CTRL_MASK) { + sleeping |= flags & RSPD_GTS_MASK; + handle_rsp_cntrl_info(qs, flags, tx_completed); + } + + r++; + if (unlikely(++q->cidx == q->size)) { + q->cidx = 0; + q->gen ^= 1; + r = q->desc; + } + prefetch(r); + + if (++q->credits >= (q->size / 4)) { + refill_rspq(adap, q, q->credits); + q->credits = 0; + } + + if (likely(skb != NULL)) { + if (eth) + rx_eth(adap, q, skb, ethpad); + else { + /* Preserve the RSS info in csum & priority */ + skb->csum = rss_hi; + skb->priority = rss_lo; + ngathered = rx_offload(&adap->tdev, q, skb, + offload_skbs, ngathered); + } + } + + --budget_left; + } + + flush_tx_completed(qs, tx_completed); + deliver_partial_bundle(&adap->tdev, q, offload_skbs, ngathered); + if (sleeping) + check_ring_db(adap, qs, sleeping); + + smp_mb(); /* commit Tx queue .processed updates */ + if (unlikely(qs->txq_stopped != 0)) + restart_tx(qs); + + budget -= budget_left; + return budget; +} + +static inline int is_pure_response(const struct rsp_desc *r) +{ + u32 n = ntohl(r->flags) & (F_RSPD_ASYNC_NOTIF | F_RSPD_IMM_DATA_VALID); + + return (n | r->len_cq) == 0; +} + +/** + * napi_rx_handler - the NAPI handler for Rx processing + * @dev: the net device + * @budget: how many packets we can process in this round + * + * Handler for new data events when using NAPI. + */ +static int napi_rx_handler(struct net_device *dev, int *budget) +{ + struct adapter *adap = dev->priv; + struct sge_qset *qs = dev2qset(dev); + int effective_budget = min(*budget, dev->quota); + + int work_done = process_responses(adap, qs, effective_budget); + *budget -= work_done; + dev->quota -= work_done; + + if (work_done >= effective_budget) + return 1; + + netif_rx_complete(dev); + + /* + * Because we don't atomically flush the following write it is + * possible that in very rare cases it can reach the device in a way + * that races with a new response being written plus an error interrupt + * causing the NAPI interrupt handler below to return unhandled status + * to the OS. To protect against this would require flushing the write + * and doing both the write and the flush with interrupts off. Way too + * expensive and unjustifiable given the rarity of the race. + * + * The race cannot happen at all with MSI-X. + */ + t3_write_reg(adap, A_SG_GTS, V_RSPQ(qs->rspq.cntxt_id) | + V_NEWTIMER(qs->rspq.next_holdoff) | + V_NEWINDEX(qs->rspq.cidx)); + return 0; +} + +/* + * Returns true if the device is already scheduled for polling. + */ +static inline int napi_is_scheduled(struct net_device *dev) +{ + return test_bit(__LINK_STATE_RX_SCHED, &dev->state); +} + +/** + * process_pure_responses - process pure responses from a response queue + * @adap: the adapter + * @qs: the queue set owning the response queue + * @r: the first pure response to process + * + * A simpler version of process_responses() that handles only pure (i.e., + * non data-carrying) responses. Such respones are too light-weight to + * justify calling a softirq under NAPI, so we handle them specially in + * the interrupt handler. The function is called with a pointer to a + * response, which the caller must ensure is a valid pure response. + * + * Returns 1 if it encounters a valid data-carrying response, 0 otherwise. + */ +static int process_pure_responses(struct adapter *adap, struct sge_qset *qs, + struct rsp_desc *r) +{ + struct sge_rspq *q = &qs->rspq; + unsigned int sleeping = 0, tx_completed[3] = { 0, 0, 0 }; + + do { + u32 flags = ntohl(r->flags); + + r++; + if (unlikely(++q->cidx == q->size)) { + q->cidx = 0; + q->gen ^= 1; + r = q->desc; + } + prefetch(r); + + if (flags & RSPD_CTRL_MASK) { + sleeping |= flags & RSPD_GTS_MASK; + handle_rsp_cntrl_info(qs, flags, tx_completed); + } + + q->pure_rsps++; + if (++q->credits >= (q->size / 4)) { + refill_rspq(adap, q, q->credits); + q->credits = 0; + } + } while (is_new_response(r, q) && is_pure_response(r)); + + flush_tx_completed(qs, tx_completed); + + if (sleeping) + check_ring_db(adap, qs, sleeping); + + smp_mb(); /* commit Tx queue .processed updates */ + if (unlikely(qs->txq_stopped != 0)) + restart_tx(qs); + + return is_new_response(r, q); +} + +/** + * handle_responses - decide what to do with new responses in NAPI mode + * @adap: the adapter + * @q: the response queue + * + * This is used by the NAPI interrupt handlers to decide what to do with + * new SGE responses. If there are no new responses it returns -1. If + * there are new responses and they are pure (i.e., non-data carrying) + * it handles them straight in hard interrupt context as they are very + * cheap and don't deliver any packets. Finally, if there are any data + * signaling responses it schedules the NAPI handler. Returns 1 if it + * schedules NAPI, 0 if all new responses were pure. + * + * The caller must ascertain NAPI is not already running. + */ +static inline int handle_responses(struct adapter *adap, struct sge_rspq *q) +{ + struct sge_qset *qs = rspq_to_qset(q); + struct rsp_desc *r = &q->desc[q->cidx]; + + if (!is_new_response(r, q)) + return -1; + if (is_pure_response(r) && process_pure_responses(adap, qs, r) == 0) { + t3_write_reg(adap, A_SG_GTS, V_RSPQ(q->cntxt_id) | + V_NEWTIMER(q->holdoff_tmr) | V_NEWINDEX(q->cidx)); + return 0; + } + if (likely(__netif_rx_schedule_prep(qs->netdev))) + __netif_rx_schedule(qs->netdev); + return 1; +} + +/* + * The MSI-X interrupt handler for an SGE response queue for the non-NAPI case + * (i.e., response queue serviced in hard interrupt). + */ +irqreturn_t t3_sge_intr_msix(int irq, void *cookie) +{ + struct sge_qset *qs = cookie; + struct adapter *adap = qs->netdev->priv; + struct sge_rspq *q = &qs->rspq; + + spin_lock(&q->lock); + if (process_responses(adap, qs, -1) == 0) + q->unhandled_irqs++; + t3_write_reg(adap, A_SG_GTS, V_RSPQ(q->cntxt_id) | + V_NEWTIMER(q->next_holdoff) | V_NEWINDEX(q->cidx)); + spin_unlock(&q->lock); + return IRQ_HANDLED; +} + +/* + * The MSI-X interrupt handler for an SGE response queue for the NAPI case + * (i.e., response queue serviced by NAPI polling). + */ +irqreturn_t t3_sge_intr_msix_napi(int irq, void *cookie) +{ + struct sge_qset *qs = cookie; + struct adapter *adap = qs->netdev->priv; + struct sge_rspq *q = &qs->rspq; + + spin_lock(&q->lock); + BUG_ON(napi_is_scheduled(qs->netdev)); + + if (handle_responses(adap, q) < 0) + q->unhandled_irqs++; + spin_unlock(&q->lock); + return IRQ_HANDLED; +} + +/* + * The non-NAPI MSI interrupt handler. This needs to handle data events from + * SGE response queues as well as error and other async events as they all use + * the same MSI vector. We use one SGE response queue per port in this mode + * and protect all response queues with queue 0's lock. + */ +static irqreturn_t t3_intr_msi(int irq, void *cookie) +{ + int new_packets = 0; + struct adapter *adap = cookie; + struct sge_rspq *q = &adap->sge.qs[0].rspq; + + spin_lock(&q->lock); + + if (process_responses(adap, &adap->sge.qs[0], -1)) { + t3_write_reg(adap, A_SG_GTS, V_RSPQ(q->cntxt_id) | + V_NEWTIMER(q->next_holdoff) | V_NEWINDEX(q->cidx)); + new_packets = 1; + } + + if (adap->params.nports == 2 && + process_responses(adap, &adap->sge.qs[1], -1)) { + struct sge_rspq *q1 = &adap->sge.qs[1].rspq; + + t3_write_reg(adap, A_SG_GTS, V_RSPQ(q1->cntxt_id) | + V_NEWTIMER(q1->next_holdoff) | + V_NEWINDEX(q1->cidx)); + new_packets = 1; + } + + if (!new_packets && t3_slow_intr_handler(adap) == 0) + q->unhandled_irqs++; + + spin_unlock(&q->lock); + return IRQ_HANDLED; +} + +static int rspq_check_napi(struct net_device *dev, struct sge_rspq *q) +{ + if (!napi_is_scheduled(dev) && is_new_response(&q->desc[q->cidx], q)) { + if (likely(__netif_rx_schedule_prep(dev))) + __netif_rx_schedule(dev); + return 1; + } + return 0; +} + +/* + * The MSI interrupt handler for the NAPI case (i.e., response queues serviced + * by NAPI polling). Handles data events from SGE response queues as well as + * error and other async events as they all use the same MSI vector. We use + * one SGE response queue per port in this mode and protect all response + * queues with queue 0's lock. + */ +irqreturn_t t3_intr_msi_napi(int irq, void *cookie) +{ + int new_packets; + struct adapter *adap = cookie; + struct sge_rspq *q = &adap->sge.qs[0].rspq; + + spin_lock(&q->lock); + + new_packets = rspq_check_napi(adap->sge.qs[0].netdev, q); + if (adap->params.nports == 2) + new_packets += rspq_check_napi(adap->sge.qs[1].netdev, + &adap->sge.qs[1].rspq); + if (!new_packets && t3_slow_intr_handler(adap) == 0) + q->unhandled_irqs++; + + spin_unlock(&q->lock); + return IRQ_HANDLED; +} + +/* + * A helper function that processes responses and issues GTS. + */ +static inline int process_responses_gts(struct adapter *adap, + struct sge_rspq *rq) +{ + int work; + + work = process_responses(adap, rspq_to_qset(rq), -1); + t3_write_reg(adap, A_SG_GTS, V_RSPQ(rq->cntxt_id) | + V_NEWTIMER(rq->next_holdoff) | V_NEWINDEX(rq->cidx)); + return work; +} + +/* + * The legacy INTx interrupt handler. This needs to handle data events from + * SGE response queues as well as error and other async events as they all use + * the same interrupt pin. We use one SGE response queue per port in this mode + * and protect all response queues with queue 0's lock. + */ +static irqreturn_t t3_intr(int irq, void *cookie) +{ + int work_done, w0, w1; + struct adapter *adap = cookie; + struct sge_rspq *q0 = &adap->sge.qs[0].rspq; + struct sge_rspq *q1 = &adap->sge.qs[1].rspq; + + spin_lock(&q0->lock); + + w0 = is_new_response(&q0->desc[q0->cidx], q0); + w1 = adap->params.nports == 2 && + is_new_response(&q1->desc[q1->cidx], q1); + + if (likely(w0 | w1)) { + t3_write_reg(adap, A_PL_CLI, 0); + t3_read_reg(adap, A_PL_CLI); /* flush */ + + if (likely(w0)) + process_responses_gts(adap, q0); + + if (w1) + process_responses_gts(adap, q1); + + work_done = w0 | w1; + } else + work_done = t3_slow_intr_handler(adap); + + spin_unlock(&q0->lock); + return IRQ_RETVAL(work_done != 0); +} + +/* + * Interrupt handler for legacy INTx interrupts for T3B-based cards. + * Handles data events from SGE response queues as well as error and other + * async events as they all use the same interrupt pin. We use one SGE + * response queue per port in this mode and protect all response queues with + * queue 0's lock. + */ +static irqreturn_t t3b_intr(int irq, void *cookie) +{ + u32 map; + struct adapter *adap = cookie; + struct sge_rspq *q0 = &adap->sge.qs[0].rspq; + + t3_write_reg(adap, A_PL_CLI, 0); + map = t3_read_reg(adap, A_SG_DATA_INTR); + + if (unlikely(!map)) /* shared interrupt, most likely */ + return IRQ_NONE; + + spin_lock(&q0->lock); + + if (unlikely(map & F_ERRINTR)) + t3_slow_intr_handler(adap); + + if (likely(map & 1)) + process_responses_gts(adap, q0); + + if (map & 2) + process_responses_gts(adap, &adap->sge.qs[1].rspq); + + spin_unlock(&q0->lock); + return IRQ_HANDLED; +} + +/* + * NAPI interrupt handler for legacy INTx interrupts for T3B-based cards. + * Handles data events from SGE response queues as well as error and other + * async events as they all use the same interrupt pin. We use one SGE + * response queue per port in this mode and protect all response queues with + * queue 0's lock. + */ +static irqreturn_t t3b_intr_napi(int irq, void *cookie) +{ + u32 map; + struct net_device *dev; + struct adapter *adap = cookie; + struct sge_rspq *q0 = &adap->sge.qs[0].rspq; + + t3_write_reg(adap, A_PL_CLI, 0); + map = t3_read_reg(adap, A_SG_DATA_INTR); + + if (unlikely(!map)) /* shared interrupt, most likely */ + return IRQ_NONE; + + spin_lock(&q0->lock); + + if (unlikely(map & F_ERRINTR)) + t3_slow_intr_handler(adap); + + if (likely(map & 1)) { + dev = adap->sge.qs[0].netdev; + + BUG_ON(napi_is_scheduled(dev)); + if (likely(__netif_rx_schedule_prep(dev))) + __netif_rx_schedule(dev); + } + if (map & 2) { + dev = adap->sge.qs[1].netdev; + + BUG_ON(napi_is_scheduled(dev)); + if (likely(__netif_rx_schedule_prep(dev))) + __netif_rx_schedule(dev); + } + + spin_unlock(&q0->lock); + return IRQ_HANDLED; +} + +/** + * t3_intr_handler - select the top-level interrupt handler + * @adap: the adapter + * @polling: whether using NAPI to service response queues + * + * Selects the top-level interrupt handler based on the type of interrupts + * (MSI-X, MSI, or legacy) and whether NAPI will be used to service the + * response queues. + */ +intr_handler_t t3_intr_handler(struct adapter *adap, int polling) +{ + if (adap->flags & USING_MSIX) + return polling ? t3_sge_intr_msix_napi : t3_sge_intr_msix; + if (adap->flags & USING_MSI) + return polling ? t3_intr_msi_napi : t3_intr_msi; + if (adap->params.rev > 0) + return polling ? t3b_intr_napi : t3b_intr; + return t3_intr; +} + +/** + * t3_sge_err_intr_handler - SGE async event interrupt handler + * @adapter: the adapter + * + * Interrupt handler for SGE asynchronous (non-data) events. + */ +void t3_sge_err_intr_handler(struct adapter *adapter) +{ + unsigned int v, status = t3_read_reg(adapter, A_SG_INT_CAUSE); + + if (status & F_RSPQCREDITOVERFOW) + CH_ALERT(adapter, "SGE response queue credit overflow\n"); + + if (status & F_RSPQDISABLED) { + v = t3_read_reg(adapter, A_SG_RSPQ_FL_STATUS); + + CH_ALERT(adapter, + "packet delivered to disabled response queue " + "(0x%x)\n", (v >> S_RSPQ0DISABLED) & 0xff); + } + + t3_write_reg(adapter, A_SG_INT_CAUSE, status); + if (status & (F_RSPQCREDITOVERFOW | F_RSPQDISABLED)) + t3_fatal_err(adapter); +} + +/** + * sge_timer_cb - perform periodic maintenance of an SGE qset + * @data: the SGE queue set to maintain + * + * Runs periodically from a timer to perform maintenance of an SGE queue + * set. It performs two tasks: + * + * a) Cleans up any completed Tx descriptors that may still be pending. + * Normal descriptor cleanup happens when new packets are added to a Tx + * queue so this timer is relatively infrequent and does any cleanup only + * if the Tx queue has not seen any new packets in a while. We make a + * best effort attempt to reclaim descriptors, in that we don't wait + * around if we cannot get a queue's lock (which most likely is because + * someone else is queueing new packets and so will also handle the clean + * up). Since control queues use immediate data exclusively we don't + * bother cleaning them up here. + * + * b) Replenishes Rx queues that have run out due to memory shortage. + * Normally new Rx buffers are added when existing ones are consumed but + * when out of memory a queue can become empty. We try to add only a few + * buffers here, the queue will be replenished fully as these new buffers + * are used up if memory shortage has subsided. + */ +static void sge_timer_cb(unsigned long data) +{ + spinlock_t *lock; + struct sge_qset *qs = (struct sge_qset *)data; + struct adapter *adap = qs->netdev->priv; + + if (spin_trylock(&qs->txq[TXQ_ETH].lock)) { + reclaim_completed_tx(adap, &qs->txq[TXQ_ETH]); + spin_unlock(&qs->txq[TXQ_ETH].lock); + } + if (spin_trylock(&qs->txq[TXQ_OFLD].lock)) { + reclaim_completed_tx(adap, &qs->txq[TXQ_OFLD]); + spin_unlock(&qs->txq[TXQ_OFLD].lock); + } + lock = (adap->flags & USING_MSIX) ? &qs->rspq.lock : + &adap->sge.qs[0].rspq.lock; + if (spin_trylock_irq(lock)) { + if (!napi_is_scheduled(qs->netdev)) { + if (qs->fl[0].credits < qs->fl[0].size) + __refill_fl(adap, &qs->fl[0]); + if (qs->fl[1].credits < qs->fl[1].size) + __refill_fl(adap, &qs->fl[1]); + } + spin_unlock_irq(lock); + } + mod_timer(&qs->tx_reclaim_timer, jiffies + TX_RECLAIM_PERIOD); +} + +/** + * t3_update_qset_coalesce - update coalescing settings for a queue set + * @qs: the SGE queue set + * @p: new queue set parameters + * + * Update the coalescing settings for an SGE queue set. Nothing is done + * if the queue set is not initialized yet. + */ +void t3_update_qset_coalesce(struct sge_qset *qs, const struct qset_params *p) +{ + if (!qs->netdev) + return; + + qs->rspq.holdoff_tmr = max(p->coalesce_usecs * 10, 1U);/* can't be 0 */ + qs->rspq.polling = p->polling; + qs->netdev->poll = p->polling ? napi_rx_handler : ofld_poll; +} + +/** + * t3_sge_alloc_qset - initialize an SGE queue set + * @adapter: the adapter + * @id: the queue set id + * @nports: how many Ethernet ports will be using this queue set + * @irq_vec_idx: the IRQ vector index for response queue interrupts + * @p: configuration parameters for this queue set + * @ntxq: number of Tx queues for the queue set + * @netdev: net device associated with this queue set + * + * Allocate resources and initialize an SGE queue set. A queue set + * comprises a response queue, two Rx free-buffer queues, and up to 3 + * Tx queues. The Tx queues are assigned roles in the order Ethernet + * queue, offload queue, and control queue. + */ +int t3_sge_alloc_qset(struct adapter *adapter, unsigned int id, int nports, + int irq_vec_idx, const struct qset_params *p, + int ntxq, struct net_device *netdev) +{ + int i, ret = -ENOMEM; + struct sge_qset *q = &adapter->sge.qs[id]; + + init_qset_cntxt(q, id); + init_timer(&q->tx_reclaim_timer); + q->tx_reclaim_timer.data = (unsigned long)q; + q->tx_reclaim_timer.function = sge_timer_cb; + + q->fl[0].desc = alloc_ring(adapter->pdev, p->fl_size, + sizeof(struct rx_desc), + sizeof(struct rx_sw_desc), + &q->fl[0].phys_addr, &q->fl[0].sdesc); + if (!q->fl[0].desc) + goto err; + + q->fl[1].desc = alloc_ring(adapter->pdev, p->jumbo_size, + sizeof(struct rx_desc), + sizeof(struct rx_sw_desc), + &q->fl[1].phys_addr, &q->fl[1].sdesc); + if (!q->fl[1].desc) + goto err; + + q->rspq.desc = alloc_ring(adapter->pdev, p->rspq_size, + sizeof(struct rsp_desc), 0, + &q->rspq.phys_addr, NULL); + if (!q->rspq.desc) + goto err; + + for (i = 0; i < ntxq; ++i) { + /* + * The control queue always uses immediate data so does not + * need to keep track of any sk_buffs. + */ + size_t sz = i == TXQ_CTRL ? 0 : sizeof(struct tx_sw_desc); + + q->txq[i].desc = alloc_ring(adapter->pdev, p->txq_size[i], + sizeof(struct tx_desc), sz, + &q->txq[i].phys_addr, + &q->txq[i].sdesc); + if (!q->txq[i].desc) + goto err; + + q->txq[i].gen = 1; + q->txq[i].size = p->txq_size[i]; + spin_lock_init(&q->txq[i].lock); + skb_queue_head_init(&q->txq[i].sendq); + } + + tasklet_init(&q->txq[TXQ_OFLD].qresume_tsk, restart_offloadq, + (unsigned long)q); + tasklet_init(&q->txq[TXQ_CTRL].qresume_tsk, restart_ctrlq, + (unsigned long)q); + + q->fl[0].gen = q->fl[1].gen = 1; + q->fl[0].size = p->fl_size; + q->fl[1].size = p->jumbo_size; + + q->rspq.gen = 1; + q->rspq.size = p->rspq_size; + spin_lock_init(&q->rspq.lock); + + q->txq[TXQ_ETH].stop_thres = nports * + flits_to_desc(sgl_len(MAX_SKB_FRAGS + 1) + 3); + + if (ntxq == 1) { + q->fl[0].buf_size = SGE_RX_SM_BUF_SIZE + 2 + + sizeof(struct cpl_rx_pkt); + q->fl[1].buf_size = MAX_FRAME_SIZE + 2 + + sizeof(struct cpl_rx_pkt); + } else { + q->fl[0].buf_size = SGE_RX_SM_BUF_SIZE + + sizeof(struct cpl_rx_data); + q->fl[1].buf_size = (16 * 1024) - + SKB_DATA_ALIGN(sizeof(struct skb_shared_info)); + } + + spin_lock(&adapter->sge.reg_lock); + + /* FL threshold comparison uses < */ + ret = t3_sge_init_rspcntxt(adapter, q->rspq.cntxt_id, irq_vec_idx, + q->rspq.phys_addr, q->rspq.size, + q->fl[0].buf_size, 1, 0); + if (ret) + goto err_unlock; + + for (i = 0; i < SGE_RXQ_PER_SET; ++i) { + ret = t3_sge_init_flcntxt(adapter, q->fl[i].cntxt_id, 0, + q->fl[i].phys_addr, q->fl[i].size, + q->fl[i].buf_size, p->cong_thres, 1, + 0); + if (ret) + goto err_unlock; + } + + ret = t3_sge_init_ecntxt(adapter, q->txq[TXQ_ETH].cntxt_id, USE_GTS, + SGE_CNTXT_ETH, id, q->txq[TXQ_ETH].phys_addr, + q->txq[TXQ_ETH].size, q->txq[TXQ_ETH].token, + 1, 0); + if (ret) + goto err_unlock; + + if (ntxq > 1) { + ret = t3_sge_init_ecntxt(adapter, q->txq[TXQ_OFLD].cntxt_id, + USE_GTS, SGE_CNTXT_OFLD, id, + q->txq[TXQ_OFLD].phys_addr, + q->txq[TXQ_OFLD].size, 0, 1, 0); + if (ret) + goto err_unlock; + } + + if (ntxq > 2) { + ret = t3_sge_init_ecntxt(adapter, q->txq[TXQ_CTRL].cntxt_id, 0, + SGE_CNTXT_CTRL, id, + q->txq[TXQ_CTRL].phys_addr, + q->txq[TXQ_CTRL].size, + q->txq[TXQ_CTRL].token, 1, 0); + if (ret) + goto err_unlock; + } + + spin_unlock(&adapter->sge.reg_lock); + q->netdev = netdev; + t3_update_qset_coalesce(q, p); + + /* + * We use atalk_ptr as a backpointer to a qset. In case a device is + * associated with multiple queue sets only the first one sets + * atalk_ptr. + */ + if (netdev->atalk_ptr == NULL) + netdev->atalk_ptr = q; + + refill_fl(adapter, &q->fl[0], q->fl[0].size, GFP_KERNEL); + refill_fl(adapter, &q->fl[1], q->fl[1].size, GFP_KERNEL); + refill_rspq(adapter, &q->rspq, q->rspq.size - 1); + + t3_write_reg(adapter, A_SG_GTS, V_RSPQ(q->rspq.cntxt_id) | + V_NEWTIMER(q->rspq.holdoff_tmr)); + + mod_timer(&q->tx_reclaim_timer, jiffies + TX_RECLAIM_PERIOD); + return 0; + + err_unlock: + spin_unlock(&adapter->sge.reg_lock); + err: + t3_free_qset(adapter, q); + return ret; +} + +/** + * t3_free_sge_resources - free SGE resources + * @adap: the adapter + * + * Frees resources used by the SGE queue sets. + */ +void t3_free_sge_resources(struct adapter *adap) +{ + int i; + + for (i = 0; i < SGE_QSETS; ++i) + t3_free_qset(adap, &adap->sge.qs[i]); +} + +/** + * t3_sge_start - enable SGE + * @adap: the adapter + * + * Enables the SGE for DMAs. This is the last step in starting packet + * transfers. + */ +void t3_sge_start(struct adapter *adap) +{ + t3_set_reg_field(adap, A_SG_CONTROL, F_GLOBALENABLE, F_GLOBALENABLE); +} + +/** + * t3_sge_stop - disable SGE operation + * @adap: the adapter + * + * Disables the DMA engine. This can be called in emeregencies (e.g., + * from error interrupts) or from normal process context. In the latter + * case it also disables any pending queue restart tasklets. Note that + * if it is called in interrupt context it cannot disable the restart + * tasklets as it cannot wait, however the tasklets will have no effect + * since the doorbells are disabled and the driver will call this again + * later from process context, at which time the tasklets will be stopped + * if they are still running. + */ +void t3_sge_stop(struct adapter *adap) +{ + t3_set_reg_field(adap, A_SG_CONTROL, F_GLOBALENABLE, 0); + if (!in_interrupt()) { + int i; + + for (i = 0; i < SGE_QSETS; ++i) { + struct sge_qset *qs = &adap->sge.qs[i]; + + tasklet_kill(&qs->txq[TXQ_OFLD].qresume_tsk); + tasklet_kill(&qs->txq[TXQ_CTRL].qresume_tsk); + } + } +} + +/** + * t3_sge_init - initialize SGE + * @adap: the adapter + * @p: the SGE parameters + * + * Performs SGE initialization needed every time after a chip reset. + * We do not initialize any of the queue sets here, instead the driver + * top-level must request those individually. We also do not enable DMA + * here, that should be done after the queues have been set up. + */ +void t3_sge_init(struct adapter *adap, struct sge_params *p) +{ + unsigned int ctrl, ups = ffs(pci_resource_len(adap->pdev, 2) >> 12); + + ctrl = F_DROPPKT | V_PKTSHIFT(2) | F_FLMODE | F_AVOIDCQOVFL | + F_CQCRDTCTRL | + V_HOSTPAGESIZE(PAGE_SHIFT - 11) | F_BIGENDIANINGRESS | + V_USERSPACESIZE(ups ? ups - 1 : 0) | F_ISCSICOALESCING; +#if SGE_NUM_GENBITS == 1 + ctrl |= F_EGRGENCTRL; +#endif + if (adap->params.rev > 0) { + if (!(adap->flags & (USING_MSIX | USING_MSI))) + ctrl |= F_ONEINTMULTQ | F_OPTONEINTMULTQ; + ctrl |= F_CQCRDTCTRL | F_AVOIDCQOVFL; + } + t3_write_reg(adap, A_SG_CONTROL, ctrl); + t3_write_reg(adap, A_SG_EGR_RCQ_DRB_THRSH, V_HIRCQDRBTHRSH(512) | + V_LORCQDRBTHRSH(512)); + t3_write_reg(adap, A_SG_TIMER_TICK, core_ticks_per_usec(adap) / 10); + t3_write_reg(adap, A_SG_CMDQ_CREDIT_TH, V_THRESHOLD(32) | + V_TIMEOUT(100 * core_ticks_per_usec(adap))); + t3_write_reg(adap, A_SG_HI_DRB_HI_THRSH, 1000); + t3_write_reg(adap, A_SG_HI_DRB_LO_THRSH, 256); + t3_write_reg(adap, A_SG_LO_DRB_HI_THRSH, 1000); + t3_write_reg(adap, A_SG_LO_DRB_LO_THRSH, 256); + t3_write_reg(adap, A_SG_OCO_BASE, V_BASE1(0xfff)); + t3_write_reg(adap, A_SG_DRB_PRI_THRESH, 63 * 1024); +} + +/** + * t3_sge_prep - one-time SGE initialization + * @adap: the associated adapter + * @p: SGE parameters + * + * Performs one-time initialization of SGE SW state. Includes determining + * defaults for the assorted SGE parameters, which admins can change until + * they are used to initialize the SGE. + */ +void __devinit t3_sge_prep(struct adapter *adap, struct sge_params *p) +{ + int i; + + p->max_pkt_size = (16 * 1024) - sizeof(struct cpl_rx_data) - + SKB_DATA_ALIGN(sizeof(struct skb_shared_info)); + + for (i = 0; i < SGE_QSETS; ++i) { + struct qset_params *q = p->qset + i; + + q->polling = adap->params.rev > 0; + q->coalesce_usecs = 5; + q->rspq_size = 1024; + q->fl_size = 4096; + q->jumbo_size = 512; + q->txq_size[TXQ_ETH] = 1024; + q->txq_size[TXQ_OFLD] = 1024; + q->txq_size[TXQ_CTRL] = 256; + q->cong_thres = 0; + } + + spin_lock_init(&adap->sge.reg_lock); +} + +/** + * t3_get_desc - dump an SGE descriptor for debugging purposes + * @qs: the queue set + * @qnum: identifies the specific queue (0..2: Tx, 3:response, 4..5: Rx) + * @idx: the descriptor index in the queue + * @data: where to dump the descriptor contents + * + * Dumps the contents of a HW descriptor of an SGE queue. Returns the + * size of the descriptor. + */ +int t3_get_desc(const struct sge_qset *qs, unsigned int qnum, unsigned int idx, + unsigned char *data) +{ + if (qnum >= 6) + return -EINVAL; + + if (qnum < 3) { + if (!qs->txq[qnum].desc || idx >= qs->txq[qnum].size) + return -EINVAL; + memcpy(data, &qs->txq[qnum].desc[idx], sizeof(struct tx_desc)); + return sizeof(struct tx_desc); + } + + if (qnum == 3) { + if (!qs->rspq.desc || idx >= qs->rspq.size) + return -EINVAL; + memcpy(data, &qs->rspq.desc[idx], sizeof(struct rsp_desc)); + return sizeof(struct rsp_desc); + } + + qnum -= 4; + if (!qs->fl[qnum].desc || idx >= qs->fl[qnum].size) + return -EINVAL; + memcpy(data, &qs->fl[qnum].desc[idx], sizeof(struct rx_desc)); + return sizeof(struct rx_desc); +} diff --git a/drivers/net/cxgb3/sge_defs.h b/drivers/net/cxgb3/sge_defs.h new file mode 100644 index 00000000000..514869e26a7 --- /dev/null +++ b/drivers/net/cxgb3/sge_defs.h @@ -0,0 +1,251 @@ +/* + * This file is automatically generated --- any changes will be lost. + */ + +#ifndef _SGE_DEFS_H +#define _SGE_DEFS_H + +#define S_EC_CREDITS 0 +#define M_EC_CREDITS 0x7FFF +#define V_EC_CREDITS(x) ((x) << S_EC_CREDITS) +#define G_EC_CREDITS(x) (((x) >> S_EC_CREDITS) & M_EC_CREDITS) + +#define S_EC_GTS 15 +#define V_EC_GTS(x) ((x) << S_EC_GTS) +#define F_EC_GTS V_EC_GTS(1U) + +#define S_EC_INDEX 16 +#define M_EC_INDEX 0xFFFF +#define V_EC_INDEX(x) ((x) << S_EC_INDEX) +#define G_EC_INDEX(x) (((x) >> S_EC_INDEX) & M_EC_INDEX) + +#define S_EC_SIZE 0 +#define M_EC_SIZE 0xFFFF +#define V_EC_SIZE(x) ((x) << S_EC_SIZE) +#define G_EC_SIZE(x) (((x) >> S_EC_SIZE) & M_EC_SIZE) + +#define S_EC_BASE_LO 16 +#define M_EC_BASE_LO 0xFFFF +#define V_EC_BASE_LO(x) ((x) << S_EC_BASE_LO) +#define G_EC_BASE_LO(x) (((x) >> S_EC_BASE_LO) & M_EC_BASE_LO) + +#define S_EC_BASE_HI 0 +#define M_EC_BASE_HI 0xF +#define V_EC_BASE_HI(x) ((x) << S_EC_BASE_HI) +#define G_EC_BASE_HI(x) (((x) >> S_EC_BASE_HI) & M_EC_BASE_HI) + +#define S_EC_RESPQ 4 +#define M_EC_RESPQ 0x7 +#define V_EC_RESPQ(x) ((x) << S_EC_RESPQ) +#define G_EC_RESPQ(x) (((x) >> S_EC_RESPQ) & M_EC_RESPQ) + +#define S_EC_TYPE 7 +#define M_EC_TYPE 0x7 +#define V_EC_TYPE(x) ((x) << S_EC_TYPE) +#define G_EC_TYPE(x) (((x) >> S_EC_TYPE) & M_EC_TYPE) + +#define S_EC_GEN 10 +#define V_EC_GEN(x) ((x) << S_EC_GEN) +#define F_EC_GEN V_EC_GEN(1U) + +#define S_EC_UP_TOKEN 11 +#define M_EC_UP_TOKEN 0xFFFFF +#define V_EC_UP_TOKEN(x) ((x) << S_EC_UP_TOKEN) +#define G_EC_UP_TOKEN(x) (((x) >> S_EC_UP_TOKEN) & M_EC_UP_TOKEN) + +#define S_EC_VALID 31 +#define V_EC_VALID(x) ((x) << S_EC_VALID) +#define F_EC_VALID V_EC_VALID(1U) + +#define S_RQ_MSI_VEC 20 +#define M_RQ_MSI_VEC 0x3F +#define V_RQ_MSI_VEC(x) ((x) << S_RQ_MSI_VEC) +#define G_RQ_MSI_VEC(x) (((x) >> S_RQ_MSI_VEC) & M_RQ_MSI_VEC) + +#define S_RQ_INTR_EN 26 +#define V_RQ_INTR_EN(x) ((x) << S_RQ_INTR_EN) +#define F_RQ_INTR_EN V_RQ_INTR_EN(1U) + +#define S_RQ_GEN 28 +#define V_RQ_GEN(x) ((x) << S_RQ_GEN) +#define F_RQ_GEN V_RQ_GEN(1U) + +#define S_CQ_INDEX 0 +#define M_CQ_INDEX 0xFFFF +#define V_CQ_INDEX(x) ((x) << S_CQ_INDEX) +#define G_CQ_INDEX(x) (((x) >> S_CQ_INDEX) & M_CQ_INDEX) + +#define S_CQ_SIZE 16 +#define M_CQ_SIZE 0xFFFF +#define V_CQ_SIZE(x) ((x) << S_CQ_SIZE) +#define G_CQ_SIZE(x) (((x) >> S_CQ_SIZE) & M_CQ_SIZE) + +#define S_CQ_BASE_HI 0 +#define M_CQ_BASE_HI 0xFFFFF +#define V_CQ_BASE_HI(x) ((x) << S_CQ_BASE_HI) +#define G_CQ_BASE_HI(x) (((x) >> S_CQ_BASE_HI) & M_CQ_BASE_HI) + +#define S_CQ_RSPQ 20 +#define M_CQ_RSPQ 0x3F +#define V_CQ_RSPQ(x) ((x) << S_CQ_RSPQ) +#define G_CQ_RSPQ(x) (((x) >> S_CQ_RSPQ) & M_CQ_RSPQ) + +#define S_CQ_ASYNC_NOTIF 26 +#define V_CQ_ASYNC_NOTIF(x) ((x) << S_CQ_ASYNC_NOTIF) +#define F_CQ_ASYNC_NOTIF V_CQ_ASYNC_NOTIF(1U) + +#define S_CQ_ARMED 27 +#define V_CQ_ARMED(x) ((x) << S_CQ_ARMED) +#define F_CQ_ARMED V_CQ_ARMED(1U) + +#define S_CQ_ASYNC_NOTIF_SOL 28 +#define V_CQ_ASYNC_NOTIF_SOL(x) ((x) << S_CQ_ASYNC_NOTIF_SOL) +#define F_CQ_ASYNC_NOTIF_SOL V_CQ_ASYNC_NOTIF_SOL(1U) + +#define S_CQ_GEN 29 +#define V_CQ_GEN(x) ((x) << S_CQ_GEN) +#define F_CQ_GEN V_CQ_GEN(1U) + +#define S_CQ_OVERFLOW_MODE 31 +#define V_CQ_OVERFLOW_MODE(x) ((x) << S_CQ_OVERFLOW_MODE) +#define F_CQ_OVERFLOW_MODE V_CQ_OVERFLOW_MODE(1U) + +#define S_CQ_CREDITS 0 +#define M_CQ_CREDITS 0xFFFF +#define V_CQ_CREDITS(x) ((x) << S_CQ_CREDITS) +#define G_CQ_CREDITS(x) (((x) >> S_CQ_CREDITS) & M_CQ_CREDITS) + +#define S_CQ_CREDIT_THRES 16 +#define M_CQ_CREDIT_THRES 0x1FFF +#define V_CQ_CREDIT_THRES(x) ((x) << S_CQ_CREDIT_THRES) +#define G_CQ_CREDIT_THRES(x) (((x) >> S_CQ_CREDIT_THRES) & M_CQ_CREDIT_THRES) + +#define S_FL_BASE_HI 0 +#define M_FL_BASE_HI 0xFFFFF +#define V_FL_BASE_HI(x) ((x) << S_FL_BASE_HI) +#define G_FL_BASE_HI(x) (((x) >> S_FL_BASE_HI) & M_FL_BASE_HI) + +#define S_FL_INDEX_LO 20 +#define M_FL_INDEX_LO 0xFFF +#define V_FL_INDEX_LO(x) ((x) << S_FL_INDEX_LO) +#define G_FL_INDEX_LO(x) (((x) >> S_FL_INDEX_LO) & M_FL_INDEX_LO) + +#define S_FL_INDEX_HI 0 +#define M_FL_INDEX_HI 0xF +#define V_FL_INDEX_HI(x) ((x) << S_FL_INDEX_HI) +#define G_FL_INDEX_HI(x) (((x) >> S_FL_INDEX_HI) & M_FL_INDEX_HI) + +#define S_FL_SIZE 4 +#define M_FL_SIZE 0xFFFF +#define V_FL_SIZE(x) ((x) << S_FL_SIZE) +#define G_FL_SIZE(x) (((x) >> S_FL_SIZE) & M_FL_SIZE) + +#define S_FL_GEN 20 +#define V_FL_GEN(x) ((x) << S_FL_GEN) +#define F_FL_GEN V_FL_GEN(1U) + +#define S_FL_ENTRY_SIZE_LO 21 +#define M_FL_ENTRY_SIZE_LO 0x7FF +#define V_FL_ENTRY_SIZE_LO(x) ((x) << S_FL_ENTRY_SIZE_LO) +#define G_FL_ENTRY_SIZE_LO(x) (((x) >> S_FL_ENTRY_SIZE_LO) & M_FL_ENTRY_SIZE_LO) + +#define S_FL_ENTRY_SIZE_HI 0 +#define M_FL_ENTRY_SIZE_HI 0x1FFFFF +#define V_FL_ENTRY_SIZE_HI(x) ((x) << S_FL_ENTRY_SIZE_HI) +#define G_FL_ENTRY_SIZE_HI(x) (((x) >> S_FL_ENTRY_SIZE_HI) & M_FL_ENTRY_SIZE_HI) + +#define S_FL_CONG_THRES 21 +#define M_FL_CONG_THRES 0x3FF +#define V_FL_CONG_THRES(x) ((x) << S_FL_CONG_THRES) +#define G_FL_CONG_THRES(x) (((x) >> S_FL_CONG_THRES) & M_FL_CONG_THRES) + +#define S_FL_GTS 31 +#define V_FL_GTS(x) ((x) << S_FL_GTS) +#define F_FL_GTS V_FL_GTS(1U) + +#define S_FLD_GEN1 31 +#define V_FLD_GEN1(x) ((x) << S_FLD_GEN1) +#define F_FLD_GEN1 V_FLD_GEN1(1U) + +#define S_FLD_GEN2 0 +#define V_FLD_GEN2(x) ((x) << S_FLD_GEN2) +#define F_FLD_GEN2 V_FLD_GEN2(1U) + +#define S_RSPD_TXQ1_CR 0 +#define M_RSPD_TXQ1_CR 0x7F +#define V_RSPD_TXQ1_CR(x) ((x) << S_RSPD_TXQ1_CR) +#define G_RSPD_TXQ1_CR(x) (((x) >> S_RSPD_TXQ1_CR) & M_RSPD_TXQ1_CR) + +#define S_RSPD_TXQ1_GTS 7 +#define V_RSPD_TXQ1_GTS(x) ((x) << S_RSPD_TXQ1_GTS) +#define F_RSPD_TXQ1_GTS V_RSPD_TXQ1_GTS(1U) + +#define S_RSPD_TXQ2_CR 8 +#define M_RSPD_TXQ2_CR 0x7F +#define V_RSPD_TXQ2_CR(x) ((x) << S_RSPD_TXQ2_CR) +#define G_RSPD_TXQ2_CR(x) (((x) >> S_RSPD_TXQ2_CR) & M_RSPD_TXQ2_CR) + +#define S_RSPD_TXQ2_GTS 15 +#define V_RSPD_TXQ2_GTS(x) ((x) << S_RSPD_TXQ2_GTS) +#define F_RSPD_TXQ2_GTS V_RSPD_TXQ2_GTS(1U) + +#define S_RSPD_TXQ0_CR 16 +#define M_RSPD_TXQ0_CR 0x7F +#define V_RSPD_TXQ0_CR(x) ((x) << S_RSPD_TXQ0_CR) +#define G_RSPD_TXQ0_CR(x) (((x) >> S_RSPD_TXQ0_CR) & M_RSPD_TXQ0_CR) + +#define S_RSPD_TXQ0_GTS 23 +#define V_RSPD_TXQ0_GTS(x) ((x) << S_RSPD_TXQ0_GTS) +#define F_RSPD_TXQ0_GTS V_RSPD_TXQ0_GTS(1U) + +#define S_RSPD_EOP 24 +#define V_RSPD_EOP(x) ((x) << S_RSPD_EOP) +#define F_RSPD_EOP V_RSPD_EOP(1U) + +#define S_RSPD_SOP 25 +#define V_RSPD_SOP(x) ((x) << S_RSPD_SOP) +#define F_RSPD_SOP V_RSPD_SOP(1U) + +#define S_RSPD_ASYNC_NOTIF 26 +#define V_RSPD_ASYNC_NOTIF(x) ((x) << S_RSPD_ASYNC_NOTIF) +#define F_RSPD_ASYNC_NOTIF V_RSPD_ASYNC_NOTIF(1U) + +#define S_RSPD_FL0_GTS 27 +#define V_RSPD_FL0_GTS(x) ((x) << S_RSPD_FL0_GTS) +#define F_RSPD_FL0_GTS V_RSPD_FL0_GTS(1U) + +#define S_RSPD_FL1_GTS 28 +#define V_RSPD_FL1_GTS(x) ((x) << S_RSPD_FL1_GTS) +#define F_RSPD_FL1_GTS V_RSPD_FL1_GTS(1U) + +#define S_RSPD_IMM_DATA_VALID 29 +#define V_RSPD_IMM_DATA_VALID(x) ((x) << S_RSPD_IMM_DATA_VALID) +#define F_RSPD_IMM_DATA_VALID V_RSPD_IMM_DATA_VALID(1U) + +#define S_RSPD_OFFLOAD 30 +#define V_RSPD_OFFLOAD(x) ((x) << S_RSPD_OFFLOAD) +#define F_RSPD_OFFLOAD V_RSPD_OFFLOAD(1U) + +#define S_RSPD_GEN1 31 +#define V_RSPD_GEN1(x) ((x) << S_RSPD_GEN1) +#define F_RSPD_GEN1 V_RSPD_GEN1(1U) + +#define S_RSPD_LEN 0 +#define M_RSPD_LEN 0x7FFFFFFF +#define V_RSPD_LEN(x) ((x) << S_RSPD_LEN) +#define G_RSPD_LEN(x) (((x) >> S_RSPD_LEN) & M_RSPD_LEN) + +#define S_RSPD_FLQ 31 +#define V_RSPD_FLQ(x) ((x) << S_RSPD_FLQ) +#define F_RSPD_FLQ V_RSPD_FLQ(1U) + +#define S_RSPD_GEN2 0 +#define V_RSPD_GEN2(x) ((x) << S_RSPD_GEN2) +#define F_RSPD_GEN2 V_RSPD_GEN2(1U) + +#define S_RSPD_INR_VEC 1 +#define M_RSPD_INR_VEC 0x7F +#define V_RSPD_INR_VEC(x) ((x) << S_RSPD_INR_VEC) +#define G_RSPD_INR_VEC(x) (((x) >> S_RSPD_INR_VEC) & M_RSPD_INR_VEC) + +#endif /* _SGE_DEFS_H */ diff --git a/drivers/net/cxgb3/t3_cpl.h b/drivers/net/cxgb3/t3_cpl.h new file mode 100644 index 00000000000..b0df4ba94e0 --- /dev/null +++ b/drivers/net/cxgb3/t3_cpl.h @@ -0,0 +1,1426 @@ +/* + * Definitions of the CPL 5 commands and status codes. + * + * Copyright (C) 2004-2006 Chelsio Communications. All rights reserved. + * + * Written by Dimitris Michailidis (dm@chelsio.com) + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the LICENSE file included in this + * release for licensing terms and conditions. + */ + +#ifndef T3_CPL_H +#define T3_CPL_H + +#if !defined(__LITTLE_ENDIAN_BITFIELD) && !defined(__BIG_ENDIAN_BITFIELD) +# include <asm/byteorder.h> +#endif + +enum CPL_opcode { + CPL_PASS_OPEN_REQ = 0x1, + CPL_PASS_ACCEPT_RPL = 0x2, + CPL_ACT_OPEN_REQ = 0x3, + CPL_SET_TCB = 0x4, + CPL_SET_TCB_FIELD = 0x5, + CPL_GET_TCB = 0x6, + CPL_PCMD = 0x7, + CPL_CLOSE_CON_REQ = 0x8, + CPL_CLOSE_LISTSRV_REQ = 0x9, + CPL_ABORT_REQ = 0xA, + CPL_ABORT_RPL = 0xB, + CPL_TX_DATA = 0xC, + CPL_RX_DATA_ACK = 0xD, + CPL_TX_PKT = 0xE, + CPL_RTE_DELETE_REQ = 0xF, + CPL_RTE_WRITE_REQ = 0x10, + CPL_RTE_READ_REQ = 0x11, + CPL_L2T_WRITE_REQ = 0x12, + CPL_L2T_READ_REQ = 0x13, + CPL_SMT_WRITE_REQ = 0x14, + CPL_SMT_READ_REQ = 0x15, + CPL_TX_PKT_LSO = 0x16, + CPL_PCMD_READ = 0x17, + CPL_BARRIER = 0x18, + CPL_TID_RELEASE = 0x1A, + + CPL_CLOSE_LISTSRV_RPL = 0x20, + CPL_ERROR = 0x21, + CPL_GET_TCB_RPL = 0x22, + CPL_L2T_WRITE_RPL = 0x23, + CPL_PCMD_READ_RPL = 0x24, + CPL_PCMD_RPL = 0x25, + CPL_PEER_CLOSE = 0x26, + CPL_RTE_DELETE_RPL = 0x27, + CPL_RTE_WRITE_RPL = 0x28, + CPL_RX_DDP_COMPLETE = 0x29, + CPL_RX_PHYS_ADDR = 0x2A, + CPL_RX_PKT = 0x2B, + CPL_RX_URG_NOTIFY = 0x2C, + CPL_SET_TCB_RPL = 0x2D, + CPL_SMT_WRITE_RPL = 0x2E, + CPL_TX_DATA_ACK = 0x2F, + + CPL_ABORT_REQ_RSS = 0x30, + CPL_ABORT_RPL_RSS = 0x31, + CPL_CLOSE_CON_RPL = 0x32, + CPL_ISCSI_HDR = 0x33, + CPL_L2T_READ_RPL = 0x34, + CPL_RDMA_CQE = 0x35, + CPL_RDMA_CQE_READ_RSP = 0x36, + CPL_RDMA_CQE_ERR = 0x37, + CPL_RTE_READ_RPL = 0x38, + CPL_RX_DATA = 0x39, + + CPL_ACT_OPEN_RPL = 0x40, + CPL_PASS_OPEN_RPL = 0x41, + CPL_RX_DATA_DDP = 0x42, + CPL_SMT_READ_RPL = 0x43, + + CPL_ACT_ESTABLISH = 0x50, + CPL_PASS_ESTABLISH = 0x51, + + CPL_PASS_ACCEPT_REQ = 0x70, + + CPL_ASYNC_NOTIF = 0x80, /* fake opcode for async notifications */ + + CPL_TX_DMA_ACK = 0xA0, + CPL_RDMA_READ_REQ = 0xA1, + CPL_RDMA_TERMINATE = 0xA2, + CPL_TRACE_PKT = 0xA3, + CPL_RDMA_EC_STATUS = 0xA5, + + NUM_CPL_CMDS /* must be last and previous entries must be sorted */ +}; + +enum CPL_error { + CPL_ERR_NONE = 0, + CPL_ERR_TCAM_PARITY = 1, + CPL_ERR_TCAM_FULL = 3, + CPL_ERR_CONN_RESET = 20, + CPL_ERR_CONN_EXIST = 22, + CPL_ERR_ARP_MISS = 23, + CPL_ERR_BAD_SYN = 24, + CPL_ERR_CONN_TIMEDOUT = 30, + CPL_ERR_XMIT_TIMEDOUT = 31, + CPL_ERR_PERSIST_TIMEDOUT = 32, + CPL_ERR_FINWAIT2_TIMEDOUT = 33, + CPL_ERR_KEEPALIVE_TIMEDOUT = 34, + CPL_ERR_RTX_NEG_ADVICE = 35, + CPL_ERR_PERSIST_NEG_ADVICE = 36, + CPL_ERR_ABORT_FAILED = 42, + CPL_ERR_GENERAL = 99 +}; + +enum { + CPL_CONN_POLICY_AUTO = 0, + CPL_CONN_POLICY_ASK = 1, + CPL_CONN_POLICY_DENY = 3 +}; + +enum { + ULP_MODE_NONE = 0, + ULP_MODE_ISCSI = 2, + ULP_MODE_RDMA = 4, + ULP_MODE_TCPDDP = 5 +}; + +enum { + ULP_CRC_HEADER = 1 << 0, + ULP_CRC_DATA = 1 << 1 +}; + +enum { + CPL_PASS_OPEN_ACCEPT, + CPL_PASS_OPEN_REJECT +}; + +enum { + CPL_ABORT_SEND_RST = 0, + CPL_ABORT_NO_RST, + CPL_ABORT_POST_CLOSE_REQ = 2 +}; + +enum { /* TX_PKT_LSO ethernet types */ + CPL_ETH_II, + CPL_ETH_II_VLAN, + CPL_ETH_802_3, + CPL_ETH_802_3_VLAN +}; + +enum { /* TCP congestion control algorithms */ + CONG_ALG_RENO, + CONG_ALG_TAHOE, + CONG_ALG_NEWRENO, + CONG_ALG_HIGHSPEED +}; + +union opcode_tid { + __be32 opcode_tid; + __u8 opcode; +}; + +#define S_OPCODE 24 +#define V_OPCODE(x) ((x) << S_OPCODE) +#define G_OPCODE(x) (((x) >> S_OPCODE) & 0xFF) +#define G_TID(x) ((x) & 0xFFFFFF) + +/* tid is assumed to be 24-bits */ +#define MK_OPCODE_TID(opcode, tid) (V_OPCODE(opcode) | (tid)) + +#define OPCODE_TID(cmd) ((cmd)->ot.opcode_tid) + +/* extract the TID from a CPL command */ +#define GET_TID(cmd) (G_TID(ntohl(OPCODE_TID(cmd)))) + +struct tcp_options { + __be16 mss; + __u8 wsf; +#if defined(__LITTLE_ENDIAN_BITFIELD) + __u8:5; + __u8 ecn:1; + __u8 sack:1; + __u8 tstamp:1; +#else + __u8 tstamp:1; + __u8 sack:1; + __u8 ecn:1; + __u8:5; +#endif +}; + +struct rss_header { + __u8 opcode; +#if defined(__LITTLE_ENDIAN_BITFIELD) + __u8 cpu_idx:6; + __u8 hash_type:2; +#else + __u8 hash_type:2; + __u8 cpu_idx:6; +#endif + __be16 cq_idx; + __be32 rss_hash_val; +}; + +#ifndef CHELSIO_FW +struct work_request_hdr { + __be32 wr_hi; + __be32 wr_lo; +}; + +/* wr_hi fields */ +#define S_WR_SGE_CREDITS 0 +#define M_WR_SGE_CREDITS 0xFF +#define V_WR_SGE_CREDITS(x) ((x) << S_WR_SGE_CREDITS) +#define G_WR_SGE_CREDITS(x) (((x) >> S_WR_SGE_CREDITS) & M_WR_SGE_CREDITS) + +#define S_WR_SGLSFLT 8 +#define M_WR_SGLSFLT 0xFF +#define V_WR_SGLSFLT(x) ((x) << S_WR_SGLSFLT) +#define G_WR_SGLSFLT(x) (((x) >> S_WR_SGLSFLT) & M_WR_SGLSFLT) + +#define S_WR_BCNTLFLT 16 +#define M_WR_BCNTLFLT 0xF +#define V_WR_BCNTLFLT(x) ((x) << S_WR_BCNTLFLT) +#define G_WR_BCNTLFLT(x) (((x) >> S_WR_BCNTLFLT) & M_WR_BCNTLFLT) + +#define S_WR_DATATYPE 20 +#define V_WR_DATATYPE(x) ((x) << S_WR_DATATYPE) +#define F_WR_DATATYPE V_WR_DATATYPE(1U) + +#define S_WR_COMPL 21 +#define V_WR_COMPL(x) ((x) << S_WR_COMPL) +#define F_WR_COMPL V_WR_COMPL(1U) + +#define S_WR_EOP 22 +#define V_WR_EOP(x) ((x) << S_WR_EOP) +#define F_WR_EOP V_WR_EOP(1U) + +#define S_WR_SOP 23 +#define V_WR_SOP(x) ((x) << S_WR_SOP) +#define F_WR_SOP V_WR_SOP(1U) + +#define S_WR_OP 24 +#define M_WR_OP 0xFF +#define V_WR_OP(x) ((x) << S_WR_OP) +#define G_WR_OP(x) (((x) >> S_WR_OP) & M_WR_OP) + +/* wr_lo fields */ +#define S_WR_LEN 0 +#define M_WR_LEN 0xFF +#define V_WR_LEN(x) ((x) << S_WR_LEN) +#define G_WR_LEN(x) (((x) >> S_WR_LEN) & M_WR_LEN) + +#define S_WR_TID 8 +#define M_WR_TID 0xFFFFF +#define V_WR_TID(x) ((x) << S_WR_TID) +#define G_WR_TID(x) (((x) >> S_WR_TID) & M_WR_TID) + +#define S_WR_CR_FLUSH 30 +#define V_WR_CR_FLUSH(x) ((x) << S_WR_CR_FLUSH) +#define F_WR_CR_FLUSH V_WR_CR_FLUSH(1U) + +#define S_WR_GEN 31 +#define V_WR_GEN(x) ((x) << S_WR_GEN) +#define F_WR_GEN V_WR_GEN(1U) + +# define WR_HDR struct work_request_hdr wr +# define RSS_HDR +#else +# define WR_HDR +# define RSS_HDR struct rss_header rss_hdr; +#endif + +/* option 0 lower-half fields */ +#define S_CPL_STATUS 0 +#define M_CPL_STATUS 0xFF +#define V_CPL_STATUS(x) ((x) << S_CPL_STATUS) +#define G_CPL_STATUS(x) (((x) >> S_CPL_STATUS) & M_CPL_STATUS) + +#define S_INJECT_TIMER 6 +#define V_INJECT_TIMER(x) ((x) << S_INJECT_TIMER) +#define F_INJECT_TIMER V_INJECT_TIMER(1U) + +#define S_NO_OFFLOAD 7 +#define V_NO_OFFLOAD(x) ((x) << S_NO_OFFLOAD) +#define F_NO_OFFLOAD V_NO_OFFLOAD(1U) + +#define S_ULP_MODE 8 +#define M_ULP_MODE 0xF +#define V_ULP_MODE(x) ((x) << S_ULP_MODE) +#define G_ULP_MODE(x) (((x) >> S_ULP_MODE) & M_ULP_MODE) + +#define S_RCV_BUFSIZ 12 +#define M_RCV_BUFSIZ 0x3FFF +#define V_RCV_BUFSIZ(x) ((x) << S_RCV_BUFSIZ) +#define G_RCV_BUFSIZ(x) (((x) >> S_RCV_BUFSIZ) & M_RCV_BUFSIZ) + +#define S_TOS 26 +#define M_TOS 0x3F +#define V_TOS(x) ((x) << S_TOS) +#define G_TOS(x) (((x) >> S_TOS) & M_TOS) + +/* option 0 upper-half fields */ +#define S_DELACK 0 +#define V_DELACK(x) ((x) << S_DELACK) +#define F_DELACK V_DELACK(1U) + +#define S_NO_CONG 1 +#define V_NO_CONG(x) ((x) << S_NO_CONG) +#define F_NO_CONG V_NO_CONG(1U) + +#define S_SRC_MAC_SEL 2 +#define M_SRC_MAC_SEL 0x3 +#define V_SRC_MAC_SEL(x) ((x) << S_SRC_MAC_SEL) +#define G_SRC_MAC_SEL(x) (((x) >> S_SRC_MAC_SEL) & M_SRC_MAC_SEL) + +#define S_L2T_IDX 4 +#define M_L2T_IDX 0x7FF +#define V_L2T_IDX(x) ((x) << S_L2T_IDX) +#define G_L2T_IDX(x) (((x) >> S_L2T_IDX) & M_L2T_IDX) + +#define S_TX_CHANNEL 15 +#define V_TX_CHANNEL(x) ((x) << S_TX_CHANNEL) +#define F_TX_CHANNEL V_TX_CHANNEL(1U) + +#define S_TCAM_BYPASS 16 +#define V_TCAM_BYPASS(x) ((x) << S_TCAM_BYPASS) +#define F_TCAM_BYPASS V_TCAM_BYPASS(1U) + +#define S_NAGLE 17 +#define V_NAGLE(x) ((x) << S_NAGLE) +#define F_NAGLE V_NAGLE(1U) + +#define S_WND_SCALE 18 +#define M_WND_SCALE 0xF +#define V_WND_SCALE(x) ((x) << S_WND_SCALE) +#define G_WND_SCALE(x) (((x) >> S_WND_SCALE) & M_WND_SCALE) + +#define S_KEEP_ALIVE 22 +#define V_KEEP_ALIVE(x) ((x) << S_KEEP_ALIVE) +#define F_KEEP_ALIVE V_KEEP_ALIVE(1U) + +#define S_MAX_RETRANS 23 +#define M_MAX_RETRANS 0xF +#define V_MAX_RETRANS(x) ((x) << S_MAX_RETRANS) +#define G_MAX_RETRANS(x) (((x) >> S_MAX_RETRANS) & M_MAX_RETRANS) + +#define S_MAX_RETRANS_OVERRIDE 27 +#define V_MAX_RETRANS_OVERRIDE(x) ((x) << S_MAX_RETRANS_OVERRIDE) +#define F_MAX_RETRANS_OVERRIDE V_MAX_RETRANS_OVERRIDE(1U) + +#define S_MSS_IDX 28 +#define M_MSS_IDX 0xF +#define V_MSS_IDX(x) ((x) << S_MSS_IDX) +#define G_MSS_IDX(x) (((x) >> S_MSS_IDX) & M_MSS_IDX) + +/* option 1 fields */ +#define S_RSS_ENABLE 0 +#define V_RSS_ENABLE(x) ((x) << S_RSS_ENABLE) +#define F_RSS_ENABLE V_RSS_ENABLE(1U) + +#define S_RSS_MASK_LEN 1 +#define M_RSS_MASK_LEN 0x7 +#define V_RSS_MASK_LEN(x) ((x) << S_RSS_MASK_LEN) +#define G_RSS_MASK_LEN(x) (((x) >> S_RSS_MASK_LEN) & M_RSS_MASK_LEN) + +#define S_CPU_IDX 4 +#define M_CPU_IDX 0x3F +#define V_CPU_IDX(x) ((x) << S_CPU_IDX) +#define G_CPU_IDX(x) (((x) >> S_CPU_IDX) & M_CPU_IDX) + +#define S_MAC_MATCH_VALID 18 +#define V_MAC_MATCH_VALID(x) ((x) << S_MAC_MATCH_VALID) +#define F_MAC_MATCH_VALID V_MAC_MATCH_VALID(1U) + +#define S_CONN_POLICY 19 +#define M_CONN_POLICY 0x3 +#define V_CONN_POLICY(x) ((x) << S_CONN_POLICY) +#define G_CONN_POLICY(x) (((x) >> S_CONN_POLICY) & M_CONN_POLICY) + +#define S_SYN_DEFENSE 21 +#define V_SYN_DEFENSE(x) ((x) << S_SYN_DEFENSE) +#define F_SYN_DEFENSE V_SYN_DEFENSE(1U) + +#define S_VLAN_PRI 22 +#define M_VLAN_PRI 0x3 +#define V_VLAN_PRI(x) ((x) << S_VLAN_PRI) +#define G_VLAN_PRI(x) (((x) >> S_VLAN_PRI) & M_VLAN_PRI) + +#define S_VLAN_PRI_VALID 24 +#define V_VLAN_PRI_VALID(x) ((x) << S_VLAN_PRI_VALID) +#define F_VLAN_PRI_VALID V_VLAN_PRI_VALID(1U) + +#define S_PKT_TYPE 25 +#define M_PKT_TYPE 0x3 +#define V_PKT_TYPE(x) ((x) << S_PKT_TYPE) +#define G_PKT_TYPE(x) (((x) >> S_PKT_TYPE) & M_PKT_TYPE) + +#define S_MAC_MATCH 27 +#define M_MAC_MATCH 0x1F +#define V_MAC_MATCH(x) ((x) << S_MAC_MATCH) +#define G_MAC_MATCH(x) (((x) >> S_MAC_MATCH) & M_MAC_MATCH) + +/* option 2 fields */ +#define S_CPU_INDEX 0 +#define M_CPU_INDEX 0x7F +#define V_CPU_INDEX(x) ((x) << S_CPU_INDEX) +#define G_CPU_INDEX(x) (((x) >> S_CPU_INDEX) & M_CPU_INDEX) + +#define S_CPU_INDEX_VALID 7 +#define V_CPU_INDEX_VALID(x) ((x) << S_CPU_INDEX_VALID) +#define F_CPU_INDEX_VALID V_CPU_INDEX_VALID(1U) + +#define S_RX_COALESCE 8 +#define M_RX_COALESCE 0x3 +#define V_RX_COALESCE(x) ((x) << S_RX_COALESCE) +#define G_RX_COALESCE(x) (((x) >> S_RX_COALESCE) & M_RX_COALESCE) + +#define S_RX_COALESCE_VALID 10 +#define V_RX_COALESCE_VALID(x) ((x) << S_RX_COALESCE_VALID) +#define F_RX_COALESCE_VALID V_RX_COALESCE_VALID(1U) + +#define S_CONG_CONTROL_FLAVOR 11 +#define M_CONG_CONTROL_FLAVOR 0x3 +#define V_CONG_CONTROL_FLAVOR(x) ((x) << S_CONG_CONTROL_FLAVOR) +#define G_CONG_CONTROL_FLAVOR(x) (((x) >> S_CONG_CONTROL_FLAVOR) & M_CONG_CONTROL_FLAVOR) + +#define S_PACING_FLAVOR 13 +#define M_PACING_FLAVOR 0x3 +#define V_PACING_FLAVOR(x) ((x) << S_PACING_FLAVOR) +#define G_PACING_FLAVOR(x) (((x) >> S_PACING_FLAVOR) & M_PACING_FLAVOR) + +#define S_FLAVORS_VALID 15 +#define V_FLAVORS_VALID(x) ((x) << S_FLAVORS_VALID) +#define F_FLAVORS_VALID V_FLAVORS_VALID(1U) + +#define S_RX_FC_DISABLE 16 +#define V_RX_FC_DISABLE(x) ((x) << S_RX_FC_DISABLE) +#define F_RX_FC_DISABLE V_RX_FC_DISABLE(1U) + +#define S_RX_FC_VALID 17 +#define V_RX_FC_VALID(x) ((x) << S_RX_FC_VALID) +#define F_RX_FC_VALID V_RX_FC_VALID(1U) + +struct cpl_pass_open_req { + WR_HDR; + union opcode_tid ot; + __be16 local_port; + __be16 peer_port; + __be32 local_ip; + __be32 peer_ip; + __be32 opt0h; + __be32 opt0l; + __be32 peer_netmask; + __be32 opt1; +}; + +struct cpl_pass_open_rpl { + RSS_HDR union opcode_tid ot; + __be16 local_port; + __be16 peer_port; + __be32 local_ip; + __be32 peer_ip; + __u8 resvd[7]; + __u8 status; +}; + +struct cpl_pass_establish { + RSS_HDR union opcode_tid ot; + __be16 local_port; + __be16 peer_port; + __be32 local_ip; + __be32 peer_ip; + __be32 tos_tid; + __be16 l2t_idx; + __be16 tcp_opt; + __be32 snd_isn; + __be32 rcv_isn; +}; + +/* cpl_pass_establish.tos_tid fields */ +#define S_PASS_OPEN_TID 0 +#define M_PASS_OPEN_TID 0xFFFFFF +#define V_PASS_OPEN_TID(x) ((x) << S_PASS_OPEN_TID) +#define G_PASS_OPEN_TID(x) (((x) >> S_PASS_OPEN_TID) & M_PASS_OPEN_TID) + +#define S_PASS_OPEN_TOS 24 +#define M_PASS_OPEN_TOS 0xFF +#define V_PASS_OPEN_TOS(x) ((x) << S_PASS_OPEN_TOS) +#define G_PASS_OPEN_TOS(x) (((x) >> S_PASS_OPEN_TOS) & M_PASS_OPEN_TOS) + +/* cpl_pass_establish.l2t_idx fields */ +#define S_L2T_IDX16 5 +#define M_L2T_IDX16 0x7FF +#define V_L2T_IDX16(x) ((x) << S_L2T_IDX16) +#define G_L2T_IDX16(x) (((x) >> S_L2T_IDX16) & M_L2T_IDX16) + +/* cpl_pass_establish.tcp_opt fields (also applies act_open_establish) */ +#define G_TCPOPT_WSCALE_OK(x) (((x) >> 5) & 1) +#define G_TCPOPT_SACK(x) (((x) >> 6) & 1) +#define G_TCPOPT_TSTAMP(x) (((x) >> 7) & 1) +#define G_TCPOPT_SND_WSCALE(x) (((x) >> 8) & 0xf) +#define G_TCPOPT_MSS(x) (((x) >> 12) & 0xf) + +struct cpl_pass_accept_req { + RSS_HDR union opcode_tid ot; + __be16 local_port; + __be16 peer_port; + __be32 local_ip; + __be32 peer_ip; + __be32 tos_tid; + struct tcp_options tcp_options; + __u8 dst_mac[6]; + __be16 vlan_tag; + __u8 src_mac[6]; +#if defined(__LITTLE_ENDIAN_BITFIELD) + __u8:3; + __u8 addr_idx:3; + __u8 port_idx:1; + __u8 exact_match:1; +#else + __u8 exact_match:1; + __u8 port_idx:1; + __u8 addr_idx:3; + __u8:3; +#endif + __u8 rsvd; + __be32 rcv_isn; + __be32 rsvd2; +}; + +struct cpl_pass_accept_rpl { + WR_HDR; + union opcode_tid ot; + __be32 opt2; + __be32 rsvd; + __be32 peer_ip; + __be32 opt0h; + __be32 opt0l_status; +}; + +struct cpl_act_open_req { + WR_HDR; + union opcode_tid ot; + __be16 local_port; + __be16 peer_port; + __be32 local_ip; + __be32 peer_ip; + __be32 opt0h; + __be32 opt0l; + __be32 params; + __be32 opt2; +}; + +/* cpl_act_open_req.params fields */ +#define S_AOPEN_VLAN_PRI 9 +#define M_AOPEN_VLAN_PRI 0x3 +#define V_AOPEN_VLAN_PRI(x) ((x) << S_AOPEN_VLAN_PRI) +#define G_AOPEN_VLAN_PRI(x) (((x) >> S_AOPEN_VLAN_PRI) & M_AOPEN_VLAN_PRI) + +#define S_AOPEN_VLAN_PRI_VALID 11 +#define V_AOPEN_VLAN_PRI_VALID(x) ((x) << S_AOPEN_VLAN_PRI_VALID) +#define F_AOPEN_VLAN_PRI_VALID V_AOPEN_VLAN_PRI_VALID(1U) + +#define S_AOPEN_PKT_TYPE 12 +#define M_AOPEN_PKT_TYPE 0x3 +#define V_AOPEN_PKT_TYPE(x) ((x) << S_AOPEN_PKT_TYPE) +#define G_AOPEN_PKT_TYPE(x) (((x) >> S_AOPEN_PKT_TYPE) & M_AOPEN_PKT_TYPE) + +#define S_AOPEN_MAC_MATCH 14 +#define M_AOPEN_MAC_MATCH 0x1F +#define V_AOPEN_MAC_MATCH(x) ((x) << S_AOPEN_MAC_MATCH) +#define G_AOPEN_MAC_MATCH(x) (((x) >> S_AOPEN_MAC_MATCH) & M_AOPEN_MAC_MATCH) + +#define S_AOPEN_MAC_MATCH_VALID 19 +#define V_AOPEN_MAC_MATCH_VALID(x) ((x) << S_AOPEN_MAC_MATCH_VALID) +#define F_AOPEN_MAC_MATCH_VALID V_AOPEN_MAC_MATCH_VALID(1U) + +#define S_AOPEN_IFF_VLAN 20 +#define M_AOPEN_IFF_VLAN 0xFFF +#define V_AOPEN_IFF_VLAN(x) ((x) << S_AOPEN_IFF_VLAN) +#define G_AOPEN_IFF_VLAN(x) (((x) >> S_AOPEN_IFF_VLAN) & M_AOPEN_IFF_VLAN) + +struct cpl_act_open_rpl { + RSS_HDR union opcode_tid ot; + __be16 local_port; + __be16 peer_port; + __be32 local_ip; + __be32 peer_ip; + __be32 atid; + __u8 rsvd[3]; + __u8 status; +}; + +struct cpl_act_establish { + RSS_HDR union opcode_tid ot; + __be16 local_port; + __be16 peer_port; + __be32 local_ip; + __be32 peer_ip; + __be32 tos_tid; + __be16 l2t_idx; + __be16 tcp_opt; + __be32 snd_isn; + __be32 rcv_isn; +}; + +struct cpl_get_tcb { + WR_HDR; + union opcode_tid ot; + __be16 cpuno; + __be16 rsvd; +}; + +struct cpl_get_tcb_rpl { + RSS_HDR union opcode_tid ot; + __u8 rsvd; + __u8 status; + __be16 len; +}; + +struct cpl_set_tcb { + WR_HDR; + union opcode_tid ot; + __u8 reply; + __u8 cpu_idx; + __be16 len; +}; + +/* cpl_set_tcb.reply fields */ +#define S_NO_REPLY 7 +#define V_NO_REPLY(x) ((x) << S_NO_REPLY) +#define F_NO_REPLY V_NO_REPLY(1U) + +struct cpl_set_tcb_field { + WR_HDR; + union opcode_tid ot; + __u8 reply; + __u8 cpu_idx; + __be16 word; + __be64 mask; + __be64 val; +}; + +struct cpl_set_tcb_rpl { + RSS_HDR union opcode_tid ot; + __u8 rsvd[3]; + __u8 status; +}; + +struct cpl_pcmd { + WR_HDR; + union opcode_tid ot; + __u8 rsvd[3]; +#if defined(__LITTLE_ENDIAN_BITFIELD) + __u8 src:1; + __u8 bundle:1; + __u8 channel:1; + __u8:5; +#else + __u8:5; + __u8 channel:1; + __u8 bundle:1; + __u8 src:1; +#endif + __be32 pcmd_parm[2]; +}; + +struct cpl_pcmd_reply { + RSS_HDR union opcode_tid ot; + __u8 status; + __u8 rsvd; + __be16 len; +}; + +struct cpl_close_con_req { + WR_HDR; + union opcode_tid ot; + __be32 rsvd; +}; + +struct cpl_close_con_rpl { + RSS_HDR union opcode_tid ot; + __u8 rsvd[3]; + __u8 status; + __be32 snd_nxt; + __be32 rcv_nxt; +}; + +struct cpl_close_listserv_req { + WR_HDR; + union opcode_tid ot; + __u8 rsvd0; + __u8 cpu_idx; + __be16 rsvd1; +}; + +struct cpl_close_listserv_rpl { + RSS_HDR union opcode_tid ot; + __u8 rsvd[3]; + __u8 status; +}; + +struct cpl_abort_req_rss { + RSS_HDR union opcode_tid ot; + __be32 rsvd0; + __u8 rsvd1; + __u8 status; + __u8 rsvd2[6]; +}; + +struct cpl_abort_req { + WR_HDR; + union opcode_tid ot; + __be32 rsvd0; + __u8 rsvd1; + __u8 cmd; + __u8 rsvd2[6]; +}; + +struct cpl_abort_rpl_rss { + RSS_HDR union opcode_tid ot; + __be32 rsvd0; + __u8 rsvd1; + __u8 status; + __u8 rsvd2[6]; +}; + +struct cpl_abort_rpl { + WR_HDR; + union opcode_tid ot; + __be32 rsvd0; + __u8 rsvd1; + __u8 cmd; + __u8 rsvd2[6]; +}; + +struct cpl_peer_close { + RSS_HDR union opcode_tid ot; + __be32 rcv_nxt; +}; + +struct tx_data_wr { + __be32 wr_hi; + __be32 wr_lo; + __be32 len; + __be32 flags; + __be32 sndseq; + __be32 param; +}; + +/* tx_data_wr.param fields */ +#define S_TX_PORT 0 +#define M_TX_PORT 0x7 +#define V_TX_PORT(x) ((x) << S_TX_PORT) +#define G_TX_PORT(x) (((x) >> S_TX_PORT) & M_TX_PORT) + +#define S_TX_MSS 4 +#define M_TX_MSS 0xF +#define V_TX_MSS(x) ((x) << S_TX_MSS) +#define G_TX_MSS(x) (((x) >> S_TX_MSS) & M_TX_MSS) + +#define S_TX_QOS 8 +#define M_TX_QOS 0xFF +#define V_TX_QOS(x) ((x) << S_TX_QOS) +#define G_TX_QOS(x) (((x) >> S_TX_QOS) & M_TX_QOS) + +#define S_TX_SNDBUF 16 +#define M_TX_SNDBUF 0xFFFF +#define V_TX_SNDBUF(x) ((x) << S_TX_SNDBUF) +#define G_TX_SNDBUF(x) (((x) >> S_TX_SNDBUF) & M_TX_SNDBUF) + +struct cpl_tx_data { + union opcode_tid ot; + __be32 len; + __be32 rsvd; + __be16 urg; + __be16 flags; +}; + +/* cpl_tx_data.flags fields */ +#define S_TX_ULP_SUBMODE 6 +#define M_TX_ULP_SUBMODE 0xF +#define V_TX_ULP_SUBMODE(x) ((x) << S_TX_ULP_SUBMODE) +#define G_TX_ULP_SUBMODE(x) (((x) >> S_TX_ULP_SUBMODE) & M_TX_ULP_SUBMODE) + +#define S_TX_ULP_MODE 10 +#define M_TX_ULP_MODE 0xF +#define V_TX_ULP_MODE(x) ((x) << S_TX_ULP_MODE) +#define G_TX_ULP_MODE(x) (((x) >> S_TX_ULP_MODE) & M_TX_ULP_MODE) + +#define S_TX_SHOVE 14 +#define V_TX_SHOVE(x) ((x) << S_TX_SHOVE) +#define F_TX_SHOVE V_TX_SHOVE(1U) + +#define S_TX_MORE 15 +#define V_TX_MORE(x) ((x) << S_TX_MORE) +#define F_TX_MORE V_TX_MORE(1U) + +/* additional tx_data_wr.flags fields */ +#define S_TX_CPU_IDX 0 +#define M_TX_CPU_IDX 0x3F +#define V_TX_CPU_IDX(x) ((x) << S_TX_CPU_IDX) +#define G_TX_CPU_IDX(x) (((x) >> S_TX_CPU_IDX) & M_TX_CPU_IDX) + +#define S_TX_URG 16 +#define V_TX_URG(x) ((x) << S_TX_URG) +#define F_TX_URG V_TX_URG(1U) + +#define S_TX_CLOSE 17 +#define V_TX_CLOSE(x) ((x) << S_TX_CLOSE) +#define F_TX_CLOSE V_TX_CLOSE(1U) + +#define S_TX_INIT 18 +#define V_TX_INIT(x) ((x) << S_TX_INIT) +#define F_TX_INIT V_TX_INIT(1U) + +#define S_TX_IMM_ACK 19 +#define V_TX_IMM_ACK(x) ((x) << S_TX_IMM_ACK) +#define F_TX_IMM_ACK V_TX_IMM_ACK(1U) + +#define S_TX_IMM_DMA 20 +#define V_TX_IMM_DMA(x) ((x) << S_TX_IMM_DMA) +#define F_TX_IMM_DMA V_TX_IMM_DMA(1U) + +struct cpl_tx_data_ack { + RSS_HDR union opcode_tid ot; + __be32 ack_seq; +}; + +struct cpl_wr_ack { + RSS_HDR union opcode_tid ot; + __be16 credits; + __be16 rsvd; + __be32 snd_nxt; + __be32 snd_una; +}; + +struct cpl_rdma_ec_status { + RSS_HDR union opcode_tid ot; + __u8 rsvd[3]; + __u8 status; +}; + +struct mngt_pktsched_wr { + __be32 wr_hi; + __be32 wr_lo; + __u8 mngt_opcode; + __u8 rsvd[7]; + __u8 sched; + __u8 idx; + __u8 min; + __u8 max; + __u8 binding; + __u8 rsvd1[3]; +}; + +struct cpl_iscsi_hdr { + RSS_HDR union opcode_tid ot; + __be16 pdu_len_ddp; + __be16 len; + __be32 seq; + __be16 urg; + __u8 rsvd; + __u8 status; +}; + +/* cpl_iscsi_hdr.pdu_len_ddp fields */ +#define S_ISCSI_PDU_LEN 0 +#define M_ISCSI_PDU_LEN 0x7FFF +#define V_ISCSI_PDU_LEN(x) ((x) << S_ISCSI_PDU_LEN) +#define G_ISCSI_PDU_LEN(x) (((x) >> S_ISCSI_PDU_LEN) & M_ISCSI_PDU_LEN) + +#define S_ISCSI_DDP 15 +#define V_ISCSI_DDP(x) ((x) << S_ISCSI_DDP) +#define F_ISCSI_DDP V_ISCSI_DDP(1U) + +struct cpl_rx_data { + RSS_HDR union opcode_tid ot; + __be16 rsvd; + __be16 len; + __be32 seq; + __be16 urg; +#if defined(__LITTLE_ENDIAN_BITFIELD) + __u8 dack_mode:2; + __u8 psh:1; + __u8 heartbeat:1; + __u8:4; +#else + __u8:4; + __u8 heartbeat:1; + __u8 psh:1; + __u8 dack_mode:2; +#endif + __u8 status; +}; + +struct cpl_rx_data_ack { + WR_HDR; + union opcode_tid ot; + __be32 credit_dack; +}; + +/* cpl_rx_data_ack.ack_seq fields */ +#define S_RX_CREDITS 0 +#define M_RX_CREDITS 0x7FFFFFF +#define V_RX_CREDITS(x) ((x) << S_RX_CREDITS) +#define G_RX_CREDITS(x) (((x) >> S_RX_CREDITS) & M_RX_CREDITS) + +#define S_RX_MODULATE 27 +#define V_RX_MODULATE(x) ((x) << S_RX_MODULATE) +#define F_RX_MODULATE V_RX_MODULATE(1U) + +#define S_RX_FORCE_ACK 28 +#define V_RX_FORCE_ACK(x) ((x) << S_RX_FORCE_ACK) +#define F_RX_FORCE_ACK V_RX_FORCE_ACK(1U) + +#define S_RX_DACK_MODE 29 +#define M_RX_DACK_MODE 0x3 +#define V_RX_DACK_MODE(x) ((x) << S_RX_DACK_MODE) +#define G_RX_DACK_MODE(x) (((x) >> S_RX_DACK_MODE) & M_RX_DACK_MODE) + +#define S_RX_DACK_CHANGE 31 +#define V_RX_DACK_CHANGE(x) ((x) << S_RX_DACK_CHANGE) +#define F_RX_DACK_CHANGE V_RX_DACK_CHANGE(1U) + +struct cpl_rx_urg_notify { + RSS_HDR union opcode_tid ot; + __be32 seq; +}; + +struct cpl_rx_ddp_complete { + RSS_HDR union opcode_tid ot; + __be32 ddp_report; +}; + +struct cpl_rx_data_ddp { + RSS_HDR union opcode_tid ot; + __be16 urg; + __be16 len; + __be32 seq; + union { + __be32 nxt_seq; + __be32 ddp_report; + }; + __be32 ulp_crc; + __be32 ddpvld_status; +}; + +/* cpl_rx_data_ddp.ddpvld_status fields */ +#define S_DDP_STATUS 0 +#define M_DDP_STATUS 0xFF +#define V_DDP_STATUS(x) ((x) << S_DDP_STATUS) +#define G_DDP_STATUS(x) (((x) >> S_DDP_STATUS) & M_DDP_STATUS) + +#define S_DDP_VALID 15 +#define M_DDP_VALID 0x1FFFF +#define V_DDP_VALID(x) ((x) << S_DDP_VALID) +#define G_DDP_VALID(x) (((x) >> S_DDP_VALID) & M_DDP_VALID) + +#define S_DDP_PPOD_MISMATCH 15 +#define V_DDP_PPOD_MISMATCH(x) ((x) << S_DDP_PPOD_MISMATCH) +#define F_DDP_PPOD_MISMATCH V_DDP_PPOD_MISMATCH(1U) + +#define S_DDP_PDU 16 +#define V_DDP_PDU(x) ((x) << S_DDP_PDU) +#define F_DDP_PDU V_DDP_PDU(1U) + +#define S_DDP_LLIMIT_ERR 17 +#define V_DDP_LLIMIT_ERR(x) ((x) << S_DDP_LLIMIT_ERR) +#define F_DDP_LLIMIT_ERR V_DDP_LLIMIT_ERR(1U) + +#define S_DDP_PPOD_PARITY_ERR 18 +#define V_DDP_PPOD_PARITY_ERR(x) ((x) << S_DDP_PPOD_PARITY_ERR) +#define F_DDP_PPOD_PARITY_ERR V_DDP_PPOD_PARITY_ERR(1U) + +#define S_DDP_PADDING_ERR 19 +#define V_DDP_PADDING_ERR(x) ((x) << S_DDP_PADDING_ERR) +#define F_DDP_PADDING_ERR V_DDP_PADDING_ERR(1U) + +#define S_DDP_HDRCRC_ERR 20 +#define V_DDP_HDRCRC_ERR(x) ((x) << S_DDP_HDRCRC_ERR) +#define F_DDP_HDRCRC_ERR V_DDP_HDRCRC_ERR(1U) + +#define S_DDP_DATACRC_ERR 21 +#define V_DDP_DATACRC_ERR(x) ((x) << S_DDP_DATACRC_ERR) +#define F_DDP_DATACRC_ERR V_DDP_DATACRC_ERR(1U) + +#define S_DDP_INVALID_TAG 22 +#define V_DDP_INVALID_TAG(x) ((x) << S_DDP_INVALID_TAG) +#define F_DDP_INVALID_TAG V_DDP_INVALID_TAG(1U) + +#define S_DDP_ULIMIT_ERR 23 +#define V_DDP_ULIMIT_ERR(x) ((x) << S_DDP_ULIMIT_ERR) +#define F_DDP_ULIMIT_ERR V_DDP_ULIMIT_ERR(1U) + +#define S_DDP_OFFSET_ERR 24 +#define V_DDP_OFFSET_ERR(x) ((x) << S_DDP_OFFSET_ERR) +#define F_DDP_OFFSET_ERR V_DDP_OFFSET_ERR(1U) + +#define S_DDP_COLOR_ERR 25 +#define V_DDP_COLOR_ERR(x) ((x) << S_DDP_COLOR_ERR) +#define F_DDP_COLOR_ERR V_DDP_COLOR_ERR(1U) + +#define S_DDP_TID_MISMATCH 26 +#define V_DDP_TID_MISMATCH(x) ((x) << S_DDP_TID_MISMATCH) +#define F_DDP_TID_MISMATCH V_DDP_TID_MISMATCH(1U) + +#define S_DDP_INVALID_PPOD 27 +#define V_DDP_INVALID_PPOD(x) ((x) << S_DDP_INVALID_PPOD) +#define F_DDP_INVALID_PPOD V_DDP_INVALID_PPOD(1U) + +#define S_DDP_ULP_MODE 28 +#define M_DDP_ULP_MODE 0xF +#define V_DDP_ULP_MODE(x) ((x) << S_DDP_ULP_MODE) +#define G_DDP_ULP_MODE(x) (((x) >> S_DDP_ULP_MODE) & M_DDP_ULP_MODE) + +/* cpl_rx_data_ddp.ddp_report fields */ +#define S_DDP_OFFSET 0 +#define M_DDP_OFFSET 0x3FFFFF +#define V_DDP_OFFSET(x) ((x) << S_DDP_OFFSET) +#define G_DDP_OFFSET(x) (((x) >> S_DDP_OFFSET) & M_DDP_OFFSET) + +#define S_DDP_URG 24 +#define V_DDP_URG(x) ((x) << S_DDP_URG) +#define F_DDP_URG V_DDP_URG(1U) + +#define S_DDP_PSH 25 +#define V_DDP_PSH(x) ((x) << S_DDP_PSH) +#define F_DDP_PSH V_DDP_PSH(1U) + +#define S_DDP_BUF_COMPLETE 26 +#define V_DDP_BUF_COMPLETE(x) ((x) << S_DDP_BUF_COMPLETE) +#define F_DDP_BUF_COMPLETE V_DDP_BUF_COMPLETE(1U) + +#define S_DDP_BUF_TIMED_OUT 27 +#define V_DDP_BUF_TIMED_OUT(x) ((x) << S_DDP_BUF_TIMED_OUT) +#define F_DDP_BUF_TIMED_OUT V_DDP_BUF_TIMED_OUT(1U) + +#define S_DDP_BUF_IDX 28 +#define V_DDP_BUF_IDX(x) ((x) << S_DDP_BUF_IDX) +#define F_DDP_BUF_IDX V_DDP_BUF_IDX(1U) + +struct cpl_tx_pkt { + WR_HDR; + __be32 cntrl; + __be32 len; +}; + +struct cpl_tx_pkt_lso { + WR_HDR; + __be32 cntrl; + __be32 len; + + __be32 rsvd; + __be32 lso_info; +}; + +/* cpl_tx_pkt*.cntrl fields */ +#define S_TXPKT_VLAN 0 +#define M_TXPKT_VLAN 0xFFFF +#define V_TXPKT_VLAN(x) ((x) << S_TXPKT_VLAN) +#define G_TXPKT_VLAN(x) (((x) >> S_TXPKT_VLAN) & M_TXPKT_VLAN) + +#define S_TXPKT_INTF 16 +#define M_TXPKT_INTF 0xF +#define V_TXPKT_INTF(x) ((x) << S_TXPKT_INTF) +#define G_TXPKT_INTF(x) (((x) >> S_TXPKT_INTF) & M_TXPKT_INTF) + +#define S_TXPKT_IPCSUM_DIS 20 +#define V_TXPKT_IPCSUM_DIS(x) ((x) << S_TXPKT_IPCSUM_DIS) +#define F_TXPKT_IPCSUM_DIS V_TXPKT_IPCSUM_DIS(1U) + +#define S_TXPKT_L4CSUM_DIS 21 +#define V_TXPKT_L4CSUM_DIS(x) ((x) << S_TXPKT_L4CSUM_DIS) +#define F_TXPKT_L4CSUM_DIS V_TXPKT_L4CSUM_DIS(1U) + +#define S_TXPKT_VLAN_VLD 22 +#define V_TXPKT_VLAN_VLD(x) ((x) << S_TXPKT_VLAN_VLD) +#define F_TXPKT_VLAN_VLD V_TXPKT_VLAN_VLD(1U) + +#define S_TXPKT_LOOPBACK 23 +#define V_TXPKT_LOOPBACK(x) ((x) << S_TXPKT_LOOPBACK) +#define F_TXPKT_LOOPBACK V_TXPKT_LOOPBACK(1U) + +#define S_TXPKT_OPCODE 24 +#define M_TXPKT_OPCODE 0xFF +#define V_TXPKT_OPCODE(x) ((x) << S_TXPKT_OPCODE) +#define G_TXPKT_OPCODE(x) (((x) >> S_TXPKT_OPCODE) & M_TXPKT_OPCODE) + +/* cpl_tx_pkt_lso.lso_info fields */ +#define S_LSO_MSS 0 +#define M_LSO_MSS 0x3FFF +#define V_LSO_MSS(x) ((x) << S_LSO_MSS) +#define G_LSO_MSS(x) (((x) >> S_LSO_MSS) & M_LSO_MSS) + +#define S_LSO_ETH_TYPE 14 +#define M_LSO_ETH_TYPE 0x3 +#define V_LSO_ETH_TYPE(x) ((x) << S_LSO_ETH_TYPE) +#define G_LSO_ETH_TYPE(x) (((x) >> S_LSO_ETH_TYPE) & M_LSO_ETH_TYPE) + +#define S_LSO_TCPHDR_WORDS 16 +#define M_LSO_TCPHDR_WORDS 0xF +#define V_LSO_TCPHDR_WORDS(x) ((x) << S_LSO_TCPHDR_WORDS) +#define G_LSO_TCPHDR_WORDS(x) (((x) >> S_LSO_TCPHDR_WORDS) & M_LSO_TCPHDR_WORDS) + +#define S_LSO_IPHDR_WORDS 20 +#define M_LSO_IPHDR_WORDS 0xF +#define V_LSO_IPHDR_WORDS(x) ((x) << S_LSO_IPHDR_WORDS) +#define G_LSO_IPHDR_WORDS(x) (((x) >> S_LSO_IPHDR_WORDS) & M_LSO_IPHDR_WORDS) + +#define S_LSO_IPV6 24 +#define V_LSO_IPV6(x) ((x) << S_LSO_IPV6) +#define F_LSO_IPV6 V_LSO_IPV6(1U) + +struct cpl_trace_pkt { +#ifdef CHELSIO_FW + __u8 rss_opcode; +#if defined(__LITTLE_ENDIAN_BITFIELD) + __u8 err:1; + __u8:7; +#else + __u8:7; + __u8 err:1; +#endif + __u8 rsvd0; +#if defined(__LITTLE_ENDIAN_BITFIELD) + __u8 qid:4; + __u8:4; +#else + __u8:4; + __u8 qid:4; +#endif + __be32 tstamp; +#endif /* CHELSIO_FW */ + + __u8 opcode; +#if defined(__LITTLE_ENDIAN_BITFIELD) + __u8 iff:4; + __u8:4; +#else + __u8:4; + __u8 iff:4; +#endif + __u8 rsvd[4]; + __be16 len; +}; + +struct cpl_rx_pkt { + RSS_HDR __u8 opcode; +#if defined(__LITTLE_ENDIAN_BITFIELD) + __u8 iff:4; + __u8 csum_valid:1; + __u8 ipmi_pkt:1; + __u8 vlan_valid:1; + __u8 fragment:1; +#else + __u8 fragment:1; + __u8 vlan_valid:1; + __u8 ipmi_pkt:1; + __u8 csum_valid:1; + __u8 iff:4; +#endif + __be16 csum; + __be16 vlan; + __be16 len; +}; + +struct cpl_l2t_write_req { + WR_HDR; + union opcode_tid ot; + __be32 params; + __u8 rsvd[2]; + __u8 dst_mac[6]; +}; + +/* cpl_l2t_write_req.params fields */ +#define S_L2T_W_IDX 0 +#define M_L2T_W_IDX 0x7FF +#define V_L2T_W_IDX(x) ((x) << S_L2T_W_IDX) +#define G_L2T_W_IDX(x) (((x) >> S_L2T_W_IDX) & M_L2T_W_IDX) + +#define S_L2T_W_VLAN 11 +#define M_L2T_W_VLAN 0xFFF +#define V_L2T_W_VLAN(x) ((x) << S_L2T_W_VLAN) +#define G_L2T_W_VLAN(x) (((x) >> S_L2T_W_VLAN) & M_L2T_W_VLAN) + +#define S_L2T_W_IFF 23 +#define M_L2T_W_IFF 0xF +#define V_L2T_W_IFF(x) ((x) << S_L2T_W_IFF) +#define G_L2T_W_IFF(x) (((x) >> S_L2T_W_IFF) & M_L2T_W_IFF) + +#define S_L2T_W_PRIO 27 +#define M_L2T_W_PRIO 0x7 +#define V_L2T_W_PRIO(x) ((x) << S_L2T_W_PRIO) +#define G_L2T_W_PRIO(x) (((x) >> S_L2T_W_PRIO) & M_L2T_W_PRIO) + +struct cpl_l2t_write_rpl { + RSS_HDR union opcode_tid ot; + __u8 status; + __u8 rsvd[3]; +}; + +struct cpl_l2t_read_req { + WR_HDR; + union opcode_tid ot; + __be16 rsvd; + __be16 l2t_idx; +}; + +struct cpl_l2t_read_rpl { + RSS_HDR union opcode_tid ot; + __be32 params; + __u8 rsvd[2]; + __u8 dst_mac[6]; +}; + +/* cpl_l2t_read_rpl.params fields */ +#define S_L2T_R_PRIO 0 +#define M_L2T_R_PRIO 0x7 +#define V_L2T_R_PRIO(x) ((x) << S_L2T_R_PRIO) +#define G_L2T_R_PRIO(x) (((x) >> S_L2T_R_PRIO) & M_L2T_R_PRIO) + +#define S_L2T_R_VLAN 8 +#define M_L2T_R_VLAN 0xFFF +#define V_L2T_R_VLAN(x) ((x) << S_L2T_R_VLAN) +#define G_L2T_R_VLAN(x) (((x) >> S_L2T_R_VLAN) & M_L2T_R_VLAN) + +#define S_L2T_R_IFF 20 +#define M_L2T_R_IFF 0xF +#define V_L2T_R_IFF(x) ((x) << S_L2T_R_IFF) +#define G_L2T_R_IFF(x) (((x) >> S_L2T_R_IFF) & M_L2T_R_IFF) + +#define S_L2T_STATUS 24 +#define M_L2T_STATUS 0xFF +#define V_L2T_STATUS(x) ((x) << S_L2T_STATUS) +#define G_L2T_STATUS(x) (((x) >> S_L2T_STATUS) & M_L2T_STATUS) + +struct cpl_smt_write_req { + WR_HDR; + union opcode_tid ot; + __u8 rsvd0; +#if defined(__LITTLE_ENDIAN_BITFIELD) + __u8 mtu_idx:4; + __u8 iff:4; +#else + __u8 iff:4; + __u8 mtu_idx:4; +#endif + __be16 rsvd2; + __be16 rsvd3; + __u8 src_mac1[6]; + __be16 rsvd4; + __u8 src_mac0[6]; +}; + +struct cpl_smt_write_rpl { + RSS_HDR union opcode_tid ot; + __u8 status; + __u8 rsvd[3]; +}; + +struct cpl_smt_read_req { + WR_HDR; + union opcode_tid ot; + __u8 rsvd0; +#if defined(__LITTLE_ENDIAN_BITFIELD) + __u8:4; + __u8 iff:4; +#else + __u8 iff:4; + __u8:4; +#endif + __be16 rsvd2; +}; + +struct cpl_smt_read_rpl { + RSS_HDR union opcode_tid ot; + __u8 status; +#if defined(__LITTLE_ENDIAN_BITFIELD) + __u8 mtu_idx:4; + __u8:4; +#else + __u8:4; + __u8 mtu_idx:4; +#endif + __be16 rsvd2; + __be16 rsvd3; + __u8 src_mac1[6]; + __be16 rsvd4; + __u8 src_mac0[6]; +}; + +struct cpl_rte_delete_req { + WR_HDR; + union opcode_tid ot; + __be32 params; +}; + +/* { cpl_rte_delete_req, cpl_rte_read_req }.params fields */ +#define S_RTE_REQ_LUT_IX 8 +#define M_RTE_REQ_LUT_IX 0x7FF +#define V_RTE_REQ_LUT_IX(x) ((x) << S_RTE_REQ_LUT_IX) +#define G_RTE_REQ_LUT_IX(x) (((x) >> S_RTE_REQ_LUT_IX) & M_RTE_REQ_LUT_IX) + +#define S_RTE_REQ_LUT_BASE 19 +#define M_RTE_REQ_LUT_BASE 0x7FF +#define V_RTE_REQ_LUT_BASE(x) ((x) << S_RTE_REQ_LUT_BASE) +#define G_RTE_REQ_LUT_BASE(x) (((x) >> S_RTE_REQ_LUT_BASE) & M_RTE_REQ_LUT_BASE) + +#define S_RTE_READ_REQ_SELECT 31 +#define V_RTE_READ_REQ_SELECT(x) ((x) << S_RTE_READ_REQ_SELECT) +#define F_RTE_READ_REQ_SELECT V_RTE_READ_REQ_SELECT(1U) + +struct cpl_rte_delete_rpl { + RSS_HDR union opcode_tid ot; + __u8 status; + __u8 rsvd[3]; +}; + +struct cpl_rte_write_req { + WR_HDR; + union opcode_tid ot; +#if defined(__LITTLE_ENDIAN_BITFIELD) + __u8:6; + __u8 write_tcam:1; + __u8 write_l2t_lut:1; +#else + __u8 write_l2t_lut:1; + __u8 write_tcam:1; + __u8:6; +#endif + __u8 rsvd[3]; + __be32 lut_params; + __be16 rsvd2; + __be16 l2t_idx; + __be32 netmask; + __be32 faddr; +}; + +/* cpl_rte_write_req.lut_params fields */ +#define S_RTE_WRITE_REQ_LUT_IX 10 +#define M_RTE_WRITE_REQ_LUT_IX 0x7FF +#define V_RTE_WRITE_REQ_LUT_IX(x) ((x) << S_RTE_WRITE_REQ_LUT_IX) +#define G_RTE_WRITE_REQ_LUT_IX(x) (((x) >> S_RTE_WRITE_REQ_LUT_IX) & M_RTE_WRITE_REQ_LUT_IX) + +#define S_RTE_WRITE_REQ_LUT_BASE 21 +#define M_RTE_WRITE_REQ_LUT_BASE 0x7FF +#define V_RTE_WRITE_REQ_LUT_BASE(x) ((x) << S_RTE_WRITE_REQ_LUT_BASE) +#define G_RTE_WRITE_REQ_LUT_BASE(x) (((x) >> S_RTE_WRITE_REQ_LUT_BASE) & M_RTE_WRITE_REQ_LUT_BASE) + +struct cpl_rte_write_rpl { + RSS_HDR union opcode_tid ot; + __u8 status; + __u8 rsvd[3]; +}; + +struct cpl_rte_read_req { + WR_HDR; + union opcode_tid ot; + __be32 params; +}; + +struct cpl_rte_read_rpl { + RSS_HDR union opcode_tid ot; + __u8 status; + __u8 rsvd0; + __be16 l2t_idx; +#if defined(__LITTLE_ENDIAN_BITFIELD) + __u8:7; + __u8 select:1; +#else + __u8 select:1; + __u8:7; +#endif + __u8 rsvd2[3]; + __be32 addr; +}; + +struct cpl_tid_release { + WR_HDR; + union opcode_tid ot; + __be32 rsvd; +}; + +struct cpl_barrier { + WR_HDR; + __u8 opcode; + __u8 rsvd[7]; +}; + +struct cpl_rdma_read_req { + __u8 opcode; + __u8 rsvd[15]; +}; + +struct cpl_rdma_terminate { +#ifdef CHELSIO_FW + __u8 opcode; + __u8 rsvd[2]; +#if defined(__LITTLE_ENDIAN_BITFIELD) + __u8 rspq:3; + __u8:5; +#else + __u8:5; + __u8 rspq:3; +#endif + __be32 tid_len; +#endif + __be32 msn; + __be32 mo; + __u8 data[0]; +}; + +/* cpl_rdma_terminate.tid_len fields */ +#define S_FLIT_CNT 0 +#define M_FLIT_CNT 0xFF +#define V_FLIT_CNT(x) ((x) << S_FLIT_CNT) +#define G_FLIT_CNT(x) (((x) >> S_FLIT_CNT) & M_FLIT_CNT) + +#define S_TERM_TID 8 +#define M_TERM_TID 0xFFFFF +#define V_TERM_TID(x) ((x) << S_TERM_TID) +#define G_TERM_TID(x) (((x) >> S_TERM_TID) & M_TERM_TID) +#endif /* T3_CPL_H */ diff --git a/drivers/net/cxgb3/t3_hw.c b/drivers/net/cxgb3/t3_hw.c new file mode 100644 index 00000000000..a4e2e57e146 --- /dev/null +++ b/drivers/net/cxgb3/t3_hw.c @@ -0,0 +1,3354 @@ +/* + * This file is part of the Chelsio T3 Ethernet driver. + * + * Copyright (C) 2003-2006 Chelsio Communications. All rights reserved. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the LICENSE file included in this + * release for licensing terms and conditions. + */ + +#include "common.h" +#include "regs.h" +#include "sge_defs.h" +#include "firmware_exports.h" + + /** + * t3_wait_op_done_val - wait until an operation is completed + * @adapter: the adapter performing the operation + * @reg: the register to check for completion + * @mask: a single-bit field within @reg that indicates completion + * @polarity: the value of the field when the operation is completed + * @attempts: number of check iterations + * @delay: delay in usecs between iterations + * @valp: where to store the value of the register at completion time + * + * Wait until an operation is completed by checking a bit in a register + * up to @attempts times. If @valp is not NULL the value of the register + * at the time it indicated completion is stored there. Returns 0 if the + * operation completes and -EAGAIN otherwise. + */ + +int t3_wait_op_done_val(struct adapter *adapter, int reg, u32 mask, + int polarity, int attempts, int delay, u32 *valp) +{ + while (1) { + u32 val = t3_read_reg(adapter, reg); + + if (!!(val & mask) == polarity) { + if (valp) + *valp = val; + return 0; + } + if (--attempts == 0) + return -EAGAIN; + if (delay) + udelay(delay); + } +} + +/** + * t3_write_regs - write a bunch of registers + * @adapter: the adapter to program + * @p: an array of register address/register value pairs + * @n: the number of address/value pairs + * @offset: register address offset + * + * Takes an array of register address/register value pairs and writes each + * value to the corresponding register. Register addresses are adjusted + * by the supplied offset. + */ +void t3_write_regs(struct adapter *adapter, const struct addr_val_pair *p, + int n, unsigned int offset) +{ + while (n--) { + t3_write_reg(adapter, p->reg_addr + offset, p->val); + p++; + } +} + +/** + * t3_set_reg_field - set a register field to a value + * @adapter: the adapter to program + * @addr: the register address + * @mask: specifies the portion of the register to modify + * @val: the new value for the register field + * + * Sets a register field specified by the supplied mask to the + * given value. + */ +void t3_set_reg_field(struct adapter *adapter, unsigned int addr, u32 mask, + u32 val) +{ + u32 v = t3_read_reg(adapter, addr) & ~mask; + + t3_write_reg(adapter, addr, v | val); + t3_read_reg(adapter, addr); /* flush */ +} + +/** + * t3_read_indirect - read indirectly addressed registers + * @adap: the adapter + * @addr_reg: register holding the indirect address + * @data_reg: register holding the value of the indirect register + * @vals: where the read register values are stored + * @start_idx: index of first indirect register to read + * @nregs: how many indirect registers to read + * + * Reads registers that are accessed indirectly through an address/data + * register pair. + */ +void t3_read_indirect(struct adapter *adap, unsigned int addr_reg, + unsigned int data_reg, u32 *vals, unsigned int nregs, + unsigned int start_idx) +{ + while (nregs--) { + t3_write_reg(adap, addr_reg, start_idx); + *vals++ = t3_read_reg(adap, data_reg); + start_idx++; + } +} + +/** + * t3_mc7_bd_read - read from MC7 through backdoor accesses + * @mc7: identifies MC7 to read from + * @start: index of first 64-bit word to read + * @n: number of 64-bit words to read + * @buf: where to store the read result + * + * Read n 64-bit words from MC7 starting at word start, using backdoor + * accesses. + */ +int t3_mc7_bd_read(struct mc7 *mc7, unsigned int start, unsigned int n, + u64 *buf) +{ + static const int shift[] = { 0, 0, 16, 24 }; + static const int step[] = { 0, 32, 16, 8 }; + + unsigned int size64 = mc7->size / 8; /* # of 64-bit words */ + struct adapter *adap = mc7->adapter; + + if (start >= size64 || start + n > size64) + return -EINVAL; + + start *= (8 << mc7->width); + while (n--) { + int i; + u64 val64 = 0; + + for (i = (1 << mc7->width) - 1; i >= 0; --i) { + int attempts = 10; + u32 val; + + t3_write_reg(adap, mc7->offset + A_MC7_BD_ADDR, start); + t3_write_reg(adap, mc7->offset + A_MC7_BD_OP, 0); + val = t3_read_reg(adap, mc7->offset + A_MC7_BD_OP); + while ((val & F_BUSY) && attempts--) + val = t3_read_reg(adap, + mc7->offset + A_MC7_BD_OP); + if (val & F_BUSY) + return -EIO; + + val = t3_read_reg(adap, mc7->offset + A_MC7_BD_DATA1); + if (mc7->width == 0) { + val64 = t3_read_reg(adap, + mc7->offset + + A_MC7_BD_DATA0); + val64 |= (u64) val << 32; + } else { + if (mc7->width > 1) + val >>= shift[mc7->width]; + val64 |= (u64) val << (step[mc7->width] * i); + } + start += 8; + } + *buf++ = val64; + } + return 0; +} + +/* + * Initialize MI1. + */ +static void mi1_init(struct adapter *adap, const struct adapter_info *ai) +{ + u32 clkdiv = adap->params.vpd.cclk / (2 * adap->params.vpd.mdc) - 1; + u32 val = F_PREEN | V_MDIINV(ai->mdiinv) | V_MDIEN(ai->mdien) | + V_CLKDIV(clkdiv); + + if (!(ai->caps & SUPPORTED_10000baseT_Full)) + val |= V_ST(1); + t3_write_reg(adap, A_MI1_CFG, val); +} + +#define MDIO_ATTEMPTS 10 + +/* + * MI1 read/write operations for direct-addressed PHYs. + */ +static int mi1_read(struct adapter *adapter, int phy_addr, int mmd_addr, + int reg_addr, unsigned int *valp) +{ + int ret; + u32 addr = V_REGADDR(reg_addr) | V_PHYADDR(phy_addr); + + if (mmd_addr) + return -EINVAL; + + mutex_lock(&adapter->mdio_lock); + t3_write_reg(adapter, A_MI1_ADDR, addr); + t3_write_reg(adapter, A_MI1_OP, V_MDI_OP(2)); + ret = t3_wait_op_done(adapter, A_MI1_OP, F_BUSY, 0, MDIO_ATTEMPTS, 20); + if (!ret) + *valp = t3_read_reg(adapter, A_MI1_DATA); + mutex_unlock(&adapter->mdio_lock); + return ret; +} + +static int mi1_write(struct adapter *adapter, int phy_addr, int mmd_addr, + int reg_addr, unsigned int val) +{ + int ret; + u32 addr = V_REGADDR(reg_addr) | V_PHYADDR(phy_addr); + + if (mmd_addr) + return -EINVAL; + + mutex_lock(&adapter->mdio_lock); + t3_write_reg(adapter, A_MI1_ADDR, addr); + t3_write_reg(adapter, A_MI1_DATA, val); + t3_write_reg(adapter, A_MI1_OP, V_MDI_OP(1)); + ret = t3_wait_op_done(adapter, A_MI1_OP, F_BUSY, 0, MDIO_ATTEMPTS, 20); + mutex_unlock(&adapter->mdio_lock); + return ret; +} + +static const struct mdio_ops mi1_mdio_ops = { + mi1_read, + mi1_write +}; + +/* + * MI1 read/write operations for indirect-addressed PHYs. + */ +static int mi1_ext_read(struct adapter *adapter, int phy_addr, int mmd_addr, + int reg_addr, unsigned int *valp) +{ + int ret; + u32 addr = V_REGADDR(mmd_addr) | V_PHYADDR(phy_addr); + + mutex_lock(&adapter->mdio_lock); + t3_write_reg(adapter, A_MI1_ADDR, addr); + t3_write_reg(adapter, A_MI1_DATA, reg_addr); + t3_write_reg(adapter, A_MI1_OP, V_MDI_OP(0)); + ret = t3_wait_op_done(adapter, A_MI1_OP, F_BUSY, 0, MDIO_ATTEMPTS, 20); + if (!ret) { + t3_write_reg(adapter, A_MI1_OP, V_MDI_OP(3)); + ret = t3_wait_op_done(adapter, A_MI1_OP, F_BUSY, 0, + MDIO_ATTEMPTS, 20); + if (!ret) + *valp = t3_read_reg(adapter, A_MI1_DATA); + } + mutex_unlock(&adapter->mdio_lock); + return ret; +} + +static int mi1_ext_write(struct adapter *adapter, int phy_addr, int mmd_addr, + int reg_addr, unsigned int val) +{ + int ret; + u32 addr = V_REGADDR(mmd_addr) | V_PHYADDR(phy_addr); + + mutex_lock(&adapter->mdio_lock); + t3_write_reg(adapter, A_MI1_ADDR, addr); + t3_write_reg(adapter, A_MI1_DATA, reg_addr); + t3_write_reg(adapter, A_MI1_OP, V_MDI_OP(0)); + ret = t3_wait_op_done(adapter, A_MI1_OP, F_BUSY, 0, MDIO_ATTEMPTS, 20); + if (!ret) { + t3_write_reg(adapter, A_MI1_DATA, val); + t3_write_reg(adapter, A_MI1_OP, V_MDI_OP(1)); + ret = t3_wait_op_done(adapter, A_MI1_OP, F_BUSY, 0, + MDIO_ATTEMPTS, 20); + } + mutex_unlock(&adapter->mdio_lock); + return ret; +} + +static const struct mdio_ops mi1_mdio_ext_ops = { + mi1_ext_read, + mi1_ext_write +}; + +/** + * t3_mdio_change_bits - modify the value of a PHY register + * @phy: the PHY to operate on + * @mmd: the device address + * @reg: the register address + * @clear: what part of the register value to mask off + * @set: what part of the register value to set + * + * Changes the value of a PHY register by applying a mask to its current + * value and ORing the result with a new value. + */ +int t3_mdio_change_bits(struct cphy *phy, int mmd, int reg, unsigned int clear, + unsigned int set) +{ + int ret; + unsigned int val; + + ret = mdio_read(phy, mmd, reg, &val); + if (!ret) { + val &= ~clear; + ret = mdio_write(phy, mmd, reg, val | set); + } + return ret; +} + +/** + * t3_phy_reset - reset a PHY block + * @phy: the PHY to operate on + * @mmd: the device address of the PHY block to reset + * @wait: how long to wait for the reset to complete in 1ms increments + * + * Resets a PHY block and optionally waits for the reset to complete. + * @mmd should be 0 for 10/100/1000 PHYs and the device address to reset + * for 10G PHYs. + */ +int t3_phy_reset(struct cphy *phy, int mmd, int wait) +{ + int err; + unsigned int ctl; + + err = t3_mdio_change_bits(phy, mmd, MII_BMCR, BMCR_PDOWN, BMCR_RESET); + if (err || !wait) + return err; + + do { + err = mdio_read(phy, mmd, MII_BMCR, &ctl); + if (err) + return err; + ctl &= BMCR_RESET; + if (ctl) + msleep(1); + } while (ctl && --wait); + + return ctl ? -1 : 0; +} + +/** + * t3_phy_advertise - set the PHY advertisement registers for autoneg + * @phy: the PHY to operate on + * @advert: bitmap of capabilities the PHY should advertise + * + * Sets a 10/100/1000 PHY's advertisement registers to advertise the + * requested capabilities. + */ +int t3_phy_advertise(struct cphy *phy, unsigned int advert) +{ + int err; + unsigned int val = 0; + + err = mdio_read(phy, 0, MII_CTRL1000, &val); + if (err) + return err; + + val &= ~(ADVERTISE_1000HALF | ADVERTISE_1000FULL); + if (advert & ADVERTISED_1000baseT_Half) + val |= ADVERTISE_1000HALF; + if (advert & ADVERTISED_1000baseT_Full) + val |= ADVERTISE_1000FULL; + + err = mdio_write(phy, 0, MII_CTRL1000, val); + if (err) + return err; + + val = 1; + if (advert & ADVERTISED_10baseT_Half) + val |= ADVERTISE_10HALF; + if (advert & ADVERTISED_10baseT_Full) + val |= ADVERTISE_10FULL; + if (advert & ADVERTISED_100baseT_Half) + val |= ADVERTISE_100HALF; + if (advert & ADVERTISED_100baseT_Full) + val |= ADVERTISE_100FULL; + if (advert & ADVERTISED_Pause) + val |= ADVERTISE_PAUSE_CAP; + if (advert & ADVERTISED_Asym_Pause) + val |= ADVERTISE_PAUSE_ASYM; + return mdio_write(phy, 0, MII_ADVERTISE, val); +} + +/** + * t3_set_phy_speed_duplex - force PHY speed and duplex + * @phy: the PHY to operate on + * @speed: requested PHY speed + * @duplex: requested PHY duplex + * + * Force a 10/100/1000 PHY's speed and duplex. This also disables + * auto-negotiation except for GigE, where auto-negotiation is mandatory. + */ +int t3_set_phy_speed_duplex(struct cphy *phy, int speed, int duplex) +{ + int err; + unsigned int ctl; + + err = mdio_read(phy, 0, MII_BMCR, &ctl); + if (err) + return err; + + if (speed >= 0) { + ctl &= ~(BMCR_SPEED100 | BMCR_SPEED1000 | BMCR_ANENABLE); + if (speed == SPEED_100) + ctl |= BMCR_SPEED100; + else if (speed == SPEED_1000) + ctl |= BMCR_SPEED1000; + } + if (duplex >= 0) { + ctl &= ~(BMCR_FULLDPLX | BMCR_ANENABLE); + if (duplex == DUPLEX_FULL) + ctl |= BMCR_FULLDPLX; + } + if (ctl & BMCR_SPEED1000) /* auto-negotiation required for GigE */ + ctl |= BMCR_ANENABLE; + return mdio_write(phy, 0, MII_BMCR, ctl); +} + +static const struct adapter_info t3_adap_info[] = { + {2, 0, 0, 0, + F_GPIO2_OEN | F_GPIO4_OEN | + F_GPIO2_OUT_VAL | F_GPIO4_OUT_VAL, F_GPIO3 | F_GPIO5, + SUPPORTED_OFFLOAD, + &mi1_mdio_ops, "Chelsio PE9000"}, + {2, 0, 0, 0, + F_GPIO2_OEN | F_GPIO4_OEN | + F_GPIO2_OUT_VAL | F_GPIO4_OUT_VAL, F_GPIO3 | F_GPIO5, + SUPPORTED_OFFLOAD, + &mi1_mdio_ops, "Chelsio T302"}, + {1, 0, 0, 0, + F_GPIO1_OEN | F_GPIO6_OEN | F_GPIO7_OEN | F_GPIO10_OEN | + F_GPIO1_OUT_VAL | F_GPIO6_OUT_VAL | F_GPIO10_OUT_VAL, 0, + SUPPORTED_10000baseT_Full | SUPPORTED_AUI | SUPPORTED_OFFLOAD, + &mi1_mdio_ext_ops, "Chelsio T310"}, + {2, 0, 0, 0, + F_GPIO1_OEN | F_GPIO2_OEN | F_GPIO4_OEN | F_GPIO5_OEN | F_GPIO6_OEN | + F_GPIO7_OEN | F_GPIO10_OEN | F_GPIO11_OEN | F_GPIO1_OUT_VAL | + F_GPIO5_OUT_VAL | F_GPIO6_OUT_VAL | F_GPIO10_OUT_VAL, 0, + SUPPORTED_10000baseT_Full | SUPPORTED_AUI | SUPPORTED_OFFLOAD, + &mi1_mdio_ext_ops, "Chelsio T320"}, +}; + +/* + * Return the adapter_info structure with a given index. Out-of-range indices + * return NULL. + */ +const struct adapter_info *t3_get_adapter_info(unsigned int id) +{ + return id < ARRAY_SIZE(t3_adap_info) ? &t3_adap_info[id] : NULL; +} + +#define CAPS_1G (SUPPORTED_10baseT_Full | SUPPORTED_100baseT_Full | \ + SUPPORTED_1000baseT_Full | SUPPORTED_Autoneg | SUPPORTED_MII) +#define CAPS_10G (SUPPORTED_10000baseT_Full | SUPPORTED_AUI) + +static const struct port_type_info port_types[] = { + {NULL}, + {t3_ael1002_phy_prep, CAPS_10G | SUPPORTED_FIBRE, + "10GBASE-XR"}, + {t3_vsc8211_phy_prep, CAPS_1G | SUPPORTED_TP | SUPPORTED_IRQ, + "10/100/1000BASE-T"}, + {NULL, CAPS_1G | SUPPORTED_TP | SUPPORTED_IRQ, + "10/100/1000BASE-T"}, + {t3_xaui_direct_phy_prep, CAPS_10G | SUPPORTED_TP, "10GBASE-CX4"}, + {NULL, CAPS_10G, "10GBASE-KX4"}, + {t3_qt2045_phy_prep, CAPS_10G | SUPPORTED_TP, "10GBASE-CX4"}, + {t3_ael1006_phy_prep, CAPS_10G | SUPPORTED_FIBRE, + "10GBASE-SR"}, + {NULL, CAPS_10G | SUPPORTED_TP, "10GBASE-CX4"}, +}; + +#undef CAPS_1G +#undef CAPS_10G + +#define VPD_ENTRY(name, len) \ + u8 name##_kword[2]; u8 name##_len; u8 name##_data[len] + +/* + * Partial EEPROM Vital Product Data structure. Includes only the ID and + * VPD-R sections. + */ +struct t3_vpd { + u8 id_tag; + u8 id_len[2]; + u8 id_data[16]; + u8 vpdr_tag; + u8 vpdr_len[2]; + VPD_ENTRY(pn, 16); /* part number */ + VPD_ENTRY(ec, 16); /* EC level */ + VPD_ENTRY(sn, 16); /* serial number */ + VPD_ENTRY(na, 12); /* MAC address base */ + VPD_ENTRY(cclk, 6); /* core clock */ + VPD_ENTRY(mclk, 6); /* mem clock */ + VPD_ENTRY(uclk, 6); /* uP clk */ + VPD_ENTRY(mdc, 6); /* MDIO clk */ + VPD_ENTRY(mt, 2); /* mem timing */ + VPD_ENTRY(xaui0cfg, 6); /* XAUI0 config */ + VPD_ENTRY(xaui1cfg, 6); /* XAUI1 config */ + VPD_ENTRY(port0, 2); /* PHY0 complex */ + VPD_ENTRY(port1, 2); /* PHY1 complex */ + VPD_ENTRY(port2, 2); /* PHY2 complex */ + VPD_ENTRY(port3, 2); /* PHY3 complex */ + VPD_ENTRY(rv, 1); /* csum */ + u32 pad; /* for multiple-of-4 sizing and alignment */ +}; + +#define EEPROM_MAX_POLL 4 +#define EEPROM_STAT_ADDR 0x4000 +#define VPD_BASE 0xc00 + +/** + * t3_seeprom_read - read a VPD EEPROM location + * @adapter: adapter to read + * @addr: EEPROM address + * @data: where to store the read data + * + * Read a 32-bit word from a location in VPD EEPROM using the card's PCI + * VPD ROM capability. A zero is written to the flag bit when the + * addres is written to the control register. The hardware device will + * set the flag to 1 when 4 bytes have been read into the data register. + */ +int t3_seeprom_read(struct adapter *adapter, u32 addr, u32 *data) +{ + u16 val; + int attempts = EEPROM_MAX_POLL; + unsigned int base = adapter->params.pci.vpd_cap_addr; + + if ((addr >= EEPROMSIZE && addr != EEPROM_STAT_ADDR) || (addr & 3)) + return -EINVAL; + + pci_write_config_word(adapter->pdev, base + PCI_VPD_ADDR, addr); + do { + udelay(10); + pci_read_config_word(adapter->pdev, base + PCI_VPD_ADDR, &val); + } while (!(val & PCI_VPD_ADDR_F) && --attempts); + + if (!(val & PCI_VPD_ADDR_F)) { + CH_ERR(adapter, "reading EEPROM address 0x%x failed\n", addr); + return -EIO; + } + pci_read_config_dword(adapter->pdev, base + PCI_VPD_DATA, data); + *data = le32_to_cpu(*data); + return 0; +} + +/** + * t3_seeprom_write - write a VPD EEPROM location + * @adapter: adapter to write + * @addr: EEPROM address + * @data: value to write + * + * Write a 32-bit word to a location in VPD EEPROM using the card's PCI + * VPD ROM capability. + */ +int t3_seeprom_write(struct adapter *adapter, u32 addr, u32 data) +{ + u16 val; + int attempts = EEPROM_MAX_POLL; + unsigned int base = adapter->params.pci.vpd_cap_addr; + + if ((addr >= EEPROMSIZE && addr != EEPROM_STAT_ADDR) || (addr & 3)) + return -EINVAL; + + pci_write_config_dword(adapter->pdev, base + PCI_VPD_DATA, + cpu_to_le32(data)); + pci_write_config_word(adapter->pdev,base + PCI_VPD_ADDR, + addr | PCI_VPD_ADDR_F); + do { + msleep(1); + pci_read_config_word(adapter->pdev, base + PCI_VPD_ADDR, &val); + } while ((val & PCI_VPD_ADDR_F) && --attempts); + + if (val & PCI_VPD_ADDR_F) { + CH_ERR(adapter, "write to EEPROM address 0x%x failed\n", addr); + return -EIO; + } + return 0; +} + +/** + * t3_seeprom_wp - enable/disable EEPROM write protection + * @adapter: the adapter + * @enable: 1 to enable write protection, 0 to disable it + * + * Enables or disables write protection on the serial EEPROM. + */ +int t3_seeprom_wp(struct adapter *adapter, int enable) +{ + return t3_seeprom_write(adapter, EEPROM_STAT_ADDR, enable ? 0xc : 0); +} + +/* + * Convert a character holding a hex digit to a number. + */ +static unsigned int hex2int(unsigned char c) +{ + return isdigit(c) ? c - '0' : toupper(c) - 'A' + 10; +} + +/** + * get_vpd_params - read VPD parameters from VPD EEPROM + * @adapter: adapter to read + * @p: where to store the parameters + * + * Reads card parameters stored in VPD EEPROM. + */ +static int get_vpd_params(struct adapter *adapter, struct vpd_params *p) +{ + int i, addr, ret; + struct t3_vpd vpd; + + /* + * Card information is normally at VPD_BASE but some early cards had + * it at 0. + */ + ret = t3_seeprom_read(adapter, VPD_BASE, (u32 *)&vpd); + if (ret) + return ret; + addr = vpd.id_tag == 0x82 ? VPD_BASE : 0; + + for (i = 0; i < sizeof(vpd); i += 4) { + ret = t3_seeprom_read(adapter, addr + i, + (u32 *)((u8 *)&vpd + i)); + if (ret) + return ret; + } + + p->cclk = simple_strtoul(vpd.cclk_data, NULL, 10); + p->mclk = simple_strtoul(vpd.mclk_data, NULL, 10); + p->uclk = simple_strtoul(vpd.uclk_data, NULL, 10); + p->mdc = simple_strtoul(vpd.mdc_data, NULL, 10); + p->mem_timing = simple_strtoul(vpd.mt_data, NULL, 10); + + /* Old eeproms didn't have port information */ + if (adapter->params.rev == 0 && !vpd.port0_data[0]) { + p->port_type[0] = uses_xaui(adapter) ? 1 : 2; + p->port_type[1] = uses_xaui(adapter) ? 6 : 2; + } else { + p->port_type[0] = hex2int(vpd.port0_data[0]); + p->port_type[1] = hex2int(vpd.port1_data[0]); + p->xauicfg[0] = simple_strtoul(vpd.xaui0cfg_data, NULL, 16); + p->xauicfg[1] = simple_strtoul(vpd.xaui1cfg_data, NULL, 16); + } + + for (i = 0; i < 6; i++) + p->eth_base[i] = hex2int(vpd.na_data[2 * i]) * 16 + + hex2int(vpd.na_data[2 * i + 1]); + return 0; +} + +/* serial flash and firmware constants */ +enum { + SF_ATTEMPTS = 5, /* max retries for SF1 operations */ + SF_SEC_SIZE = 64 * 1024, /* serial flash sector size */ + SF_SIZE = SF_SEC_SIZE * 8, /* serial flash size */ + + /* flash command opcodes */ + SF_PROG_PAGE = 2, /* program page */ + SF_WR_DISABLE = 4, /* disable writes */ + SF_RD_STATUS = 5, /* read status register */ + SF_WR_ENABLE = 6, /* enable writes */ + SF_RD_DATA_FAST = 0xb, /* read flash */ + SF_ERASE_SECTOR = 0xd8, /* erase sector */ + + FW_FLASH_BOOT_ADDR = 0x70000, /* start address of FW in flash */ + FW_VERS_ADDR = 0x77ffc /* flash address holding FW version */ +}; + +/** + * sf1_read - read data from the serial flash + * @adapter: the adapter + * @byte_cnt: number of bytes to read + * @cont: whether another operation will be chained + * @valp: where to store the read data + * + * Reads up to 4 bytes of data from the serial flash. The location of + * the read needs to be specified prior to calling this by issuing the + * appropriate commands to the serial flash. + */ +static int sf1_read(struct adapter *adapter, unsigned int byte_cnt, int cont, + u32 *valp) +{ + int ret; + + if (!byte_cnt || byte_cnt > 4) + return -EINVAL; + if (t3_read_reg(adapter, A_SF_OP) & F_BUSY) + return -EBUSY; + t3_write_reg(adapter, A_SF_OP, V_CONT(cont) | V_BYTECNT(byte_cnt - 1)); + ret = t3_wait_op_done(adapter, A_SF_OP, F_BUSY, 0, SF_ATTEMPTS, 10); + if (!ret) + *valp = t3_read_reg(adapter, A_SF_DATA); + return ret; +} + +/** + * sf1_write - write data to the serial flash + * @adapter: the adapter + * @byte_cnt: number of bytes to write + * @cont: whether another operation will be chained + * @val: value to write + * + * Writes up to 4 bytes of data to the serial flash. The location of + * the write needs to be specified prior to calling this by issuing the + * appropriate commands to the serial flash. + */ +static int sf1_write(struct adapter *adapter, unsigned int byte_cnt, int cont, + u32 val) +{ + if (!byte_cnt || byte_cnt > 4) + return -EINVAL; + if (t3_read_reg(adapter, A_SF_OP) & F_BUSY) + return -EBUSY; + t3_write_reg(adapter, A_SF_DATA, val); + t3_write_reg(adapter, A_SF_OP, + V_CONT(cont) | V_BYTECNT(byte_cnt - 1) | V_OP(1)); + return t3_wait_op_done(adapter, A_SF_OP, F_BUSY, 0, SF_ATTEMPTS, 10); +} + +/** + * flash_wait_op - wait for a flash operation to complete + * @adapter: the adapter + * @attempts: max number of polls of the status register + * @delay: delay between polls in ms + * + * Wait for a flash operation to complete by polling the status register. + */ +static int flash_wait_op(struct adapter *adapter, int attempts, int delay) +{ + int ret; + u32 status; + + while (1) { + if ((ret = sf1_write(adapter, 1, 1, SF_RD_STATUS)) != 0 || + (ret = sf1_read(adapter, 1, 0, &status)) != 0) + return ret; + if (!(status & 1)) + return 0; + if (--attempts == 0) + return -EAGAIN; + if (delay) + msleep(delay); + } +} + +/** + * t3_read_flash - read words from serial flash + * @adapter: the adapter + * @addr: the start address for the read + * @nwords: how many 32-bit words to read + * @data: where to store the read data + * @byte_oriented: whether to store data as bytes or as words + * + * Read the specified number of 32-bit words from the serial flash. + * If @byte_oriented is set the read data is stored as a byte array + * (i.e., big-endian), otherwise as 32-bit words in the platform's + * natural endianess. + */ +int t3_read_flash(struct adapter *adapter, unsigned int addr, + unsigned int nwords, u32 *data, int byte_oriented) +{ + int ret; + + if (addr + nwords * sizeof(u32) > SF_SIZE || (addr & 3)) + return -EINVAL; + + addr = swab32(addr) | SF_RD_DATA_FAST; + + if ((ret = sf1_write(adapter, 4, 1, addr)) != 0 || + (ret = sf1_read(adapter, 1, 1, data)) != 0) + return ret; + + for (; nwords; nwords--, data++) { + ret = sf1_read(adapter, 4, nwords > 1, data); + if (ret) + return ret; + if (byte_oriented) + *data = htonl(*data); + } + return 0; +} + +/** + * t3_write_flash - write up to a page of data to the serial flash + * @adapter: the adapter + * @addr: the start address to write + * @n: length of data to write + * @data: the data to write + * + * Writes up to a page of data (256 bytes) to the serial flash starting + * at the given address. + */ +static int t3_write_flash(struct adapter *adapter, unsigned int addr, + unsigned int n, const u8 *data) +{ + int ret; + u32 buf[64]; + unsigned int i, c, left, val, offset = addr & 0xff; + + if (addr + n > SF_SIZE || offset + n > 256) + return -EINVAL; + + val = swab32(addr) | SF_PROG_PAGE; + + if ((ret = sf1_write(adapter, 1, 0, SF_WR_ENABLE)) != 0 || + (ret = sf1_write(adapter, 4, 1, val)) != 0) + return ret; + + for (left = n; left; left -= c) { + c = min(left, 4U); + for (val = 0, i = 0; i < c; ++i) + val = (val << 8) + *data++; + + ret = sf1_write(adapter, c, c != left, val); + if (ret) + return ret; + } + if ((ret = flash_wait_op(adapter, 5, 1)) != 0) + return ret; + + /* Read the page to verify the write succeeded */ + ret = t3_read_flash(adapter, addr & ~0xff, ARRAY_SIZE(buf), buf, 1); + if (ret) + return ret; + + if (memcmp(data - n, (u8 *) buf + offset, n)) + return -EIO; + return 0; +} + +/** + * t3_get_fw_version - read the firmware version + * @adapter: the adapter + * @vers: where to place the version + * + * Reads the FW version from flash. + */ +int t3_get_fw_version(struct adapter *adapter, u32 *vers) +{ + return t3_read_flash(adapter, FW_VERS_ADDR, 1, vers, 0); +} + +/** + * t3_check_fw_version - check if the FW is compatible with this driver + * @adapter: the adapter + * + * Checks if an adapter's FW is compatible with the driver. Returns 0 + * if the versions are compatible, a negative error otherwise. + */ +int t3_check_fw_version(struct adapter *adapter) +{ + int ret; + u32 vers; + + ret = t3_get_fw_version(adapter, &vers); + if (ret) + return ret; + + /* Minor 0xfff means the FW is an internal development-only version. */ + if ((vers & 0xfff) == 0xfff) + return 0; + + if (vers == 0x1002009) + return 0; + + CH_ERR(adapter, "found wrong FW version, driver needs version 2.9\n"); + return -EINVAL; +} + +/** + * t3_flash_erase_sectors - erase a range of flash sectors + * @adapter: the adapter + * @start: the first sector to erase + * @end: the last sector to erase + * + * Erases the sectors in the given range. + */ +static int t3_flash_erase_sectors(struct adapter *adapter, int start, int end) +{ + while (start <= end) { + int ret; + + if ((ret = sf1_write(adapter, 1, 0, SF_WR_ENABLE)) != 0 || + (ret = sf1_write(adapter, 4, 0, + SF_ERASE_SECTOR | (start << 8))) != 0 || + (ret = flash_wait_op(adapter, 5, 500)) != 0) + return ret; + start++; + } + return 0; +} + +/* + * t3_load_fw - download firmware + * @adapter: the adapter + * @fw_data: the firrware image to write + * @size: image size + * + * Write the supplied firmware image to the card's serial flash. + * The FW image has the following sections: @size - 8 bytes of code and + * data, followed by 4 bytes of FW version, followed by the 32-bit + * 1's complement checksum of the whole image. + */ +int t3_load_fw(struct adapter *adapter, const u8 *fw_data, unsigned int size) +{ + u32 csum; + unsigned int i; + const u32 *p = (const u32 *)fw_data; + int ret, addr, fw_sector = FW_FLASH_BOOT_ADDR >> 16; + + if (size & 3) + return -EINVAL; + if (size > FW_VERS_ADDR + 8 - FW_FLASH_BOOT_ADDR) + return -EFBIG; + + for (csum = 0, i = 0; i < size / sizeof(csum); i++) + csum += ntohl(p[i]); + if (csum != 0xffffffff) { + CH_ERR(adapter, "corrupted firmware image, checksum %u\n", + csum); + return -EINVAL; + } + + ret = t3_flash_erase_sectors(adapter, fw_sector, fw_sector); + if (ret) + goto out; + + size -= 8; /* trim off version and checksum */ + for (addr = FW_FLASH_BOOT_ADDR; size;) { + unsigned int chunk_size = min(size, 256U); + + ret = t3_write_flash(adapter, addr, chunk_size, fw_data); + if (ret) + goto out; + + addr += chunk_size; + fw_data += chunk_size; + size -= chunk_size; + } + + ret = t3_write_flash(adapter, FW_VERS_ADDR, 4, fw_data); +out: + if (ret) + CH_ERR(adapter, "firmware download failed, error %d\n", ret); + return ret; +} + +#define CIM_CTL_BASE 0x2000 + +/** + * t3_cim_ctl_blk_read - read a block from CIM control region + * + * @adap: the adapter + * @addr: the start address within the CIM control region + * @n: number of words to read + * @valp: where to store the result + * + * Reads a block of 4-byte words from the CIM control region. + */ +int t3_cim_ctl_blk_read(struct adapter *adap, unsigned int addr, + unsigned int n, unsigned int *valp) +{ + int ret = 0; + + if (t3_read_reg(adap, A_CIM_HOST_ACC_CTRL) & F_HOSTBUSY) + return -EBUSY; + + for ( ; !ret && n--; addr += 4) { + t3_write_reg(adap, A_CIM_HOST_ACC_CTRL, CIM_CTL_BASE + addr); + ret = t3_wait_op_done(adap, A_CIM_HOST_ACC_CTRL, F_HOSTBUSY, + 0, 5, 2); + if (!ret) + *valp++ = t3_read_reg(adap, A_CIM_HOST_ACC_DATA); + } + return ret; +} + + +/** + * t3_link_changed - handle interface link changes + * @adapter: the adapter + * @port_id: the port index that changed link state + * + * Called when a port's link settings change to propagate the new values + * to the associated PHY and MAC. After performing the common tasks it + * invokes an OS-specific handler. + */ +void t3_link_changed(struct adapter *adapter, int port_id) +{ + int link_ok, speed, duplex, fc; + struct port_info *pi = adap2pinfo(adapter, port_id); + struct cphy *phy = &pi->phy; + struct cmac *mac = &pi->mac; + struct link_config *lc = &pi->link_config; + + phy->ops->get_link_status(phy, &link_ok, &speed, &duplex, &fc); + + if (link_ok != lc->link_ok && adapter->params.rev > 0 && + uses_xaui(adapter)) { + if (link_ok) + t3b_pcs_reset(mac); + t3_write_reg(adapter, A_XGM_XAUI_ACT_CTRL + mac->offset, + link_ok ? F_TXACTENABLE | F_RXEN : 0); + } + lc->link_ok = link_ok; + lc->speed = speed < 0 ? SPEED_INVALID : speed; + lc->duplex = duplex < 0 ? DUPLEX_INVALID : duplex; + if (lc->requested_fc & PAUSE_AUTONEG) + fc &= lc->requested_fc; + else + fc = lc->requested_fc & (PAUSE_RX | PAUSE_TX); + + if (link_ok && speed >= 0 && lc->autoneg == AUTONEG_ENABLE) { + /* Set MAC speed, duplex, and flow control to match PHY. */ + t3_mac_set_speed_duplex_fc(mac, speed, duplex, fc); + lc->fc = fc; + } + + t3_os_link_changed(adapter, port_id, link_ok, speed, duplex, fc); +} + +/** + * t3_link_start - apply link configuration to MAC/PHY + * @phy: the PHY to setup + * @mac: the MAC to setup + * @lc: the requested link configuration + * + * Set up a port's MAC and PHY according to a desired link configuration. + * - If the PHY can auto-negotiate first decide what to advertise, then + * enable/disable auto-negotiation as desired, and reset. + * - If the PHY does not auto-negotiate just reset it. + * - If auto-negotiation is off set the MAC to the proper speed/duplex/FC, + * otherwise do it later based on the outcome of auto-negotiation. + */ +int t3_link_start(struct cphy *phy, struct cmac *mac, struct link_config *lc) +{ + unsigned int fc = lc->requested_fc & (PAUSE_RX | PAUSE_TX); + + lc->link_ok = 0; + if (lc->supported & SUPPORTED_Autoneg) { + lc->advertising &= ~(ADVERTISED_Asym_Pause | ADVERTISED_Pause); + if (fc) { + lc->advertising |= ADVERTISED_Asym_Pause; + if (fc & PAUSE_RX) + lc->advertising |= ADVERTISED_Pause; + } + phy->ops->advertise(phy, lc->advertising); + + if (lc->autoneg == AUTONEG_DISABLE) { + lc->speed = lc->requested_speed; + lc->duplex = lc->requested_duplex; + lc->fc = (unsigned char)fc; + t3_mac_set_speed_duplex_fc(mac, lc->speed, lc->duplex, + fc); + /* Also disables autoneg */ + phy->ops->set_speed_duplex(phy, lc->speed, lc->duplex); + phy->ops->reset(phy, 0); + } else + phy->ops->autoneg_enable(phy); + } else { + t3_mac_set_speed_duplex_fc(mac, -1, -1, fc); + lc->fc = (unsigned char)fc; + phy->ops->reset(phy, 0); + } + return 0; +} + +/** + * t3_set_vlan_accel - control HW VLAN extraction + * @adapter: the adapter + * @ports: bitmap of adapter ports to operate on + * @on: enable (1) or disable (0) HW VLAN extraction + * + * Enables or disables HW extraction of VLAN tags for the given port. + */ +void t3_set_vlan_accel(struct adapter *adapter, unsigned int ports, int on) +{ + t3_set_reg_field(adapter, A_TP_OUT_CONFIG, + ports << S_VLANEXTRACTIONENABLE, + on ? (ports << S_VLANEXTRACTIONENABLE) : 0); +} + +struct intr_info { + unsigned int mask; /* bits to check in interrupt status */ + const char *msg; /* message to print or NULL */ + short stat_idx; /* stat counter to increment or -1 */ + unsigned short fatal:1; /* whether the condition reported is fatal */ +}; + +/** + * t3_handle_intr_status - table driven interrupt handler + * @adapter: the adapter that generated the interrupt + * @reg: the interrupt status register to process + * @mask: a mask to apply to the interrupt status + * @acts: table of interrupt actions + * @stats: statistics counters tracking interrupt occurences + * + * A table driven interrupt handler that applies a set of masks to an + * interrupt status word and performs the corresponding actions if the + * interrupts described by the mask have occured. The actions include + * optionally printing a warning or alert message, and optionally + * incrementing a stat counter. The table is terminated by an entry + * specifying mask 0. Returns the number of fatal interrupt conditions. + */ +static int t3_handle_intr_status(struct adapter *adapter, unsigned int reg, + unsigned int mask, + const struct intr_info *acts, + unsigned long *stats) +{ + int fatal = 0; + unsigned int status = t3_read_reg(adapter, reg) & mask; + + for (; acts->mask; ++acts) { + if (!(status & acts->mask)) + continue; + if (acts->fatal) { + fatal++; + CH_ALERT(adapter, "%s (0x%x)\n", + acts->msg, status & acts->mask); + } else if (acts->msg) + CH_WARN(adapter, "%s (0x%x)\n", + acts->msg, status & acts->mask); + if (acts->stat_idx >= 0) + stats[acts->stat_idx]++; + } + if (status) /* clear processed interrupts */ + t3_write_reg(adapter, reg, status); + return fatal; +} + +#define SGE_INTR_MASK (F_RSPQDISABLED) +#define MC5_INTR_MASK (F_PARITYERR | F_ACTRGNFULL | F_UNKNOWNCMD | \ + F_REQQPARERR | F_DISPQPARERR | F_DELACTEMPTY | \ + F_NFASRCHFAIL) +#define MC7_INTR_MASK (F_AE | F_UE | F_CE | V_PE(M_PE)) +#define XGM_INTR_MASK (V_TXFIFO_PRTY_ERR(M_TXFIFO_PRTY_ERR) | \ + V_RXFIFO_PRTY_ERR(M_RXFIFO_PRTY_ERR) | \ + F_TXFIFO_UNDERRUN | F_RXFIFO_OVERFLOW) +#define PCIX_INTR_MASK (F_MSTDETPARERR | F_SIGTARABT | F_RCVTARABT | \ + F_RCVMSTABT | F_SIGSYSERR | F_DETPARERR | \ + F_SPLCMPDIS | F_UNXSPLCMP | F_RCVSPLCMPERR | \ + F_DETCORECCERR | F_DETUNCECCERR | F_PIOPARERR | \ + V_WFPARERR(M_WFPARERR) | V_RFPARERR(M_RFPARERR) | \ + V_CFPARERR(M_CFPARERR) /* | V_MSIXPARERR(M_MSIXPARERR) */) +#define PCIE_INTR_MASK (F_UNXSPLCPLERRR | F_UNXSPLCPLERRC | F_PCIE_PIOPARERR |\ + F_PCIE_WFPARERR | F_PCIE_RFPARERR | F_PCIE_CFPARERR | \ + /* V_PCIE_MSIXPARERR(M_PCIE_MSIXPARERR) | */ \ + V_BISTERR(M_BISTERR) | F_PEXERR) +#define ULPRX_INTR_MASK F_PARERR +#define ULPTX_INTR_MASK 0 +#define CPLSW_INTR_MASK (F_TP_FRAMING_ERROR | \ + F_SGE_FRAMING_ERROR | F_CIM_FRAMING_ERROR | \ + F_ZERO_SWITCH_ERROR) +#define CIM_INTR_MASK (F_BLKWRPLINT | F_BLKRDPLINT | F_BLKWRCTLINT | \ + F_BLKRDCTLINT | F_BLKWRFLASHINT | F_BLKRDFLASHINT | \ + F_SGLWRFLASHINT | F_WRBLKFLASHINT | F_BLKWRBOOTINT | \ + F_FLASHRANGEINT | F_SDRAMRANGEINT | F_RSVDSPACEINT) +#define PMTX_INTR_MASK (F_ZERO_C_CMD_ERROR | ICSPI_FRM_ERR | OESPI_FRM_ERR | \ + V_ICSPI_PAR_ERROR(M_ICSPI_PAR_ERROR) | \ + V_OESPI_PAR_ERROR(M_OESPI_PAR_ERROR)) +#define PMRX_INTR_MASK (F_ZERO_E_CMD_ERROR | IESPI_FRM_ERR | OCSPI_FRM_ERR | \ + V_IESPI_PAR_ERROR(M_IESPI_PAR_ERROR) | \ + V_OCSPI_PAR_ERROR(M_OCSPI_PAR_ERROR)) +#define MPS_INTR_MASK (V_TX0TPPARERRENB(M_TX0TPPARERRENB) | \ + V_TX1TPPARERRENB(M_TX1TPPARERRENB) | \ + V_RXTPPARERRENB(M_RXTPPARERRENB) | \ + V_MCAPARERRENB(M_MCAPARERRENB)) +#define PL_INTR_MASK (F_T3DBG | F_XGMAC0_0 | F_XGMAC0_1 | F_MC5A | F_PM1_TX | \ + F_PM1_RX | F_ULP2_TX | F_ULP2_RX | F_TP1 | F_CIM | \ + F_MC7_CM | F_MC7_PMTX | F_MC7_PMRX | F_SGE3 | F_PCIM0 | \ + F_MPS0 | F_CPL_SWITCH) + +/* + * Interrupt handler for the PCIX1 module. + */ +static void pci_intr_handler(struct adapter *adapter) +{ + static const struct intr_info pcix1_intr_info[] = { + { F_PEXERR, "PCI PEX error", -1, 1 }, + {F_MSTDETPARERR, "PCI master detected parity error", -1, 1}, + {F_SIGTARABT, "PCI signaled target abort", -1, 1}, + {F_RCVTARABT, "PCI received target abort", -1, 1}, + {F_RCVMSTABT, "PCI received master abort", -1, 1}, + {F_SIGSYSERR, "PCI signaled system error", -1, 1}, + {F_DETPARERR, "PCI detected parity error", -1, 1}, + {F_SPLCMPDIS, "PCI split completion discarded", -1, 1}, + {F_UNXSPLCMP, "PCI unexpected split completion error", -1, 1}, + {F_RCVSPLCMPERR, "PCI received split completion error", -1, + 1}, + {F_DETCORECCERR, "PCI correctable ECC error", + STAT_PCI_CORR_ECC, 0}, + {F_DETUNCECCERR, "PCI uncorrectable ECC error", -1, 1}, + {F_PIOPARERR, "PCI PIO FIFO parity error", -1, 1}, + {V_WFPARERR(M_WFPARERR), "PCI write FIFO parity error", -1, + 1}, + {V_RFPARERR(M_RFPARERR), "PCI read FIFO parity error", -1, + 1}, + {V_CFPARERR(M_CFPARERR), "PCI command FIFO parity error", -1, + 1}, + {V_MSIXPARERR(M_MSIXPARERR), "PCI MSI-X table/PBA parity " + "error", -1, 1}, + {0} + }; + + if (t3_handle_intr_status(adapter, A_PCIX_INT_CAUSE, PCIX_INTR_MASK, + pcix1_intr_info, adapter->irq_stats)) + t3_fatal_err(adapter); +} + +/* + * Interrupt handler for the PCIE module. + */ +static void pcie_intr_handler(struct adapter *adapter) +{ + static const struct intr_info pcie_intr_info[] = { + {F_UNXSPLCPLERRR, + "PCI unexpected split completion DMA read error", -1, 1}, + {F_UNXSPLCPLERRC, + "PCI unexpected split completion DMA command error", -1, 1}, + {F_PCIE_PIOPARERR, "PCI PIO FIFO parity error", -1, 1}, + {F_PCIE_WFPARERR, "PCI write FIFO parity error", -1, 1}, + {F_PCIE_RFPARERR, "PCI read FIFO parity error", -1, 1}, + {F_PCIE_CFPARERR, "PCI command FIFO parity error", -1, 1}, + {V_PCIE_MSIXPARERR(M_PCIE_MSIXPARERR), + "PCI MSI-X table/PBA parity error", -1, 1}, + {V_BISTERR(M_BISTERR), "PCI BIST error", -1, 1}, + {0} + }; + + if (t3_handle_intr_status(adapter, A_PCIE_INT_CAUSE, PCIE_INTR_MASK, + pcie_intr_info, adapter->irq_stats)) + t3_fatal_err(adapter); +} + +/* + * TP interrupt handler. + */ +static void tp_intr_handler(struct adapter *adapter) +{ + static const struct intr_info tp_intr_info[] = { + {0xffffff, "TP parity error", -1, 1}, + {0x1000000, "TP out of Rx pages", -1, 1}, + {0x2000000, "TP out of Tx pages", -1, 1}, + {0} + }; + + if (t3_handle_intr_status(adapter, A_TP_INT_CAUSE, 0xffffffff, + tp_intr_info, NULL)) + t3_fatal_err(adapter); +} + +/* + * CIM interrupt handler. + */ +static void cim_intr_handler(struct adapter *adapter) +{ + static const struct intr_info cim_intr_info[] = { + {F_RSVDSPACEINT, "CIM reserved space write", -1, 1}, + {F_SDRAMRANGEINT, "CIM SDRAM address out of range", -1, 1}, + {F_FLASHRANGEINT, "CIM flash address out of range", -1, 1}, + {F_BLKWRBOOTINT, "CIM block write to boot space", -1, 1}, + {F_WRBLKFLASHINT, "CIM write to cached flash space", -1, 1}, + {F_SGLWRFLASHINT, "CIM single write to flash space", -1, 1}, + {F_BLKRDFLASHINT, "CIM block read from flash space", -1, 1}, + {F_BLKWRFLASHINT, "CIM block write to flash space", -1, 1}, + {F_BLKRDCTLINT, "CIM block read from CTL space", -1, 1}, + {F_BLKWRCTLINT, "CIM block write to CTL space", -1, 1}, + {F_BLKRDPLINT, "CIM block read from PL space", -1, 1}, + {F_BLKWRPLINT, "CIM block write to PL space", -1, 1}, + {0} + }; + + if (t3_handle_intr_status(adapter, A_CIM_HOST_INT_CAUSE, 0xffffffff, + cim_intr_info, NULL)) + t3_fatal_err(adapter); +} + +/* + * ULP RX interrupt handler. + */ +static void ulprx_intr_handler(struct adapter *adapter) +{ + static const struct intr_info ulprx_intr_info[] = { + {F_PARERR, "ULP RX parity error", -1, 1}, + {0} + }; + + if (t3_handle_intr_status(adapter, A_ULPRX_INT_CAUSE, 0xffffffff, + ulprx_intr_info, NULL)) + t3_fatal_err(adapter); +} + +/* + * ULP TX interrupt handler. + */ +static void ulptx_intr_handler(struct adapter *adapter) +{ + static const struct intr_info ulptx_intr_info[] = { + {F_PBL_BOUND_ERR_CH0, "ULP TX channel 0 PBL out of bounds", + STAT_ULP_CH0_PBL_OOB, 0}, + {F_PBL_BOUND_ERR_CH1, "ULP TX channel 1 PBL out of bounds", + STAT_ULP_CH1_PBL_OOB, 0}, + {0} + }; + + if (t3_handle_intr_status(adapter, A_ULPTX_INT_CAUSE, 0xffffffff, + ulptx_intr_info, adapter->irq_stats)) + t3_fatal_err(adapter); +} + +#define ICSPI_FRM_ERR (F_ICSPI0_FIFO2X_RX_FRAMING_ERROR | \ + F_ICSPI1_FIFO2X_RX_FRAMING_ERROR | F_ICSPI0_RX_FRAMING_ERROR | \ + F_ICSPI1_RX_FRAMING_ERROR | F_ICSPI0_TX_FRAMING_ERROR | \ + F_ICSPI1_TX_FRAMING_ERROR) +#define OESPI_FRM_ERR (F_OESPI0_RX_FRAMING_ERROR | \ + F_OESPI1_RX_FRAMING_ERROR | F_OESPI0_TX_FRAMING_ERROR | \ + F_OESPI1_TX_FRAMING_ERROR | F_OESPI0_OFIFO2X_TX_FRAMING_ERROR | \ + F_OESPI1_OFIFO2X_TX_FRAMING_ERROR) + +/* + * PM TX interrupt handler. + */ +static void pmtx_intr_handler(struct adapter *adapter) +{ + static const struct intr_info pmtx_intr_info[] = { + {F_ZERO_C_CMD_ERROR, "PMTX 0-length pcmd", -1, 1}, + {ICSPI_FRM_ERR, "PMTX ispi framing error", -1, 1}, + {OESPI_FRM_ERR, "PMTX ospi framing error", -1, 1}, + {V_ICSPI_PAR_ERROR(M_ICSPI_PAR_ERROR), + "PMTX ispi parity error", -1, 1}, + {V_OESPI_PAR_ERROR(M_OESPI_PAR_ERROR), + "PMTX ospi parity error", -1, 1}, + {0} + }; + + if (t3_handle_intr_status(adapter, A_PM1_TX_INT_CAUSE, 0xffffffff, + pmtx_intr_info, NULL)) + t3_fatal_err(adapter); +} + +#define IESPI_FRM_ERR (F_IESPI0_FIFO2X_RX_FRAMING_ERROR | \ + F_IESPI1_FIFO2X_RX_FRAMING_ERROR | F_IESPI0_RX_FRAMING_ERROR | \ + F_IESPI1_RX_FRAMING_ERROR | F_IESPI0_TX_FRAMING_ERROR | \ + F_IESPI1_TX_FRAMING_ERROR) +#define OCSPI_FRM_ERR (F_OCSPI0_RX_FRAMING_ERROR | \ + F_OCSPI1_RX_FRAMING_ERROR | F_OCSPI0_TX_FRAMING_ERROR | \ + F_OCSPI1_TX_FRAMING_ERROR | F_OCSPI0_OFIFO2X_TX_FRAMING_ERROR | \ + F_OCSPI1_OFIFO2X_TX_FRAMING_ERROR) + +/* + * PM RX interrupt handler. + */ +static void pmrx_intr_handler(struct adapter *adapter) +{ + static const struct intr_info pmrx_intr_info[] = { + {F_ZERO_E_CMD_ERROR, "PMRX 0-length pcmd", -1, 1}, + {IESPI_FRM_ERR, "PMRX ispi framing error", -1, 1}, + {OCSPI_FRM_ERR, "PMRX ospi framing error", -1, 1}, + {V_IESPI_PAR_ERROR(M_IESPI_PAR_ERROR), + "PMRX ispi parity error", -1, 1}, + {V_OCSPI_PAR_ERROR(M_OCSPI_PAR_ERROR), + "PMRX ospi parity error", -1, 1}, + {0} + }; + + if (t3_handle_intr_status(adapter, A_PM1_RX_INT_CAUSE, 0xffffffff, + pmrx_intr_info, NULL)) + t3_fatal_err(adapter); +} + +/* + * CPL switch interrupt handler. + */ +static void cplsw_intr_handler(struct adapter *adapter) +{ + static const struct intr_info cplsw_intr_info[] = { +/* { F_CIM_OVFL_ERROR, "CPL switch CIM overflow", -1, 1 }, */ + {F_TP_FRAMING_ERROR, "CPL switch TP framing error", -1, 1}, + {F_SGE_FRAMING_ERROR, "CPL switch SGE framing error", -1, 1}, + {F_CIM_FRAMING_ERROR, "CPL switch CIM framing error", -1, 1}, + {F_ZERO_SWITCH_ERROR, "CPL switch no-switch error", -1, 1}, + {0} + }; + + if (t3_handle_intr_status(adapter, A_CPL_INTR_CAUSE, 0xffffffff, + cplsw_intr_info, NULL)) + t3_fatal_err(adapter); +} + +/* + * MPS interrupt handler. + */ +static void mps_intr_handler(struct adapter *adapter) +{ + static const struct intr_info mps_intr_info[] = { + {0x1ff, "MPS parity error", -1, 1}, + {0} + }; + + if (t3_handle_intr_status(adapter, A_MPS_INT_CAUSE, 0xffffffff, + mps_intr_info, NULL)) + t3_fatal_err(adapter); +} + +#define MC7_INTR_FATAL (F_UE | V_PE(M_PE) | F_AE) + +/* + * MC7 interrupt handler. + */ +static void mc7_intr_handler(struct mc7 *mc7) +{ + struct adapter *adapter = mc7->adapter; + u32 cause = t3_read_reg(adapter, mc7->offset + A_MC7_INT_CAUSE); + + if (cause & F_CE) { + mc7->stats.corr_err++; + CH_WARN(adapter, "%s MC7 correctable error at addr 0x%x, " + "data 0x%x 0x%x 0x%x\n", mc7->name, + t3_read_reg(adapter, mc7->offset + A_MC7_CE_ADDR), + t3_read_reg(adapter, mc7->offset + A_MC7_CE_DATA0), + t3_read_reg(adapter, mc7->offset + A_MC7_CE_DATA1), + t3_read_reg(adapter, mc7->offset + A_MC7_CE_DATA2)); + } + + if (cause & F_UE) { + mc7->stats.uncorr_err++; + CH_ALERT(adapter, "%s MC7 uncorrectable error at addr 0x%x, " + "data 0x%x 0x%x 0x%x\n", mc7->name, + t3_read_reg(adapter, mc7->offset + A_MC7_UE_ADDR), + t3_read_reg(adapter, mc7->offset + A_MC7_UE_DATA0), + t3_read_reg(adapter, mc7->offset + A_MC7_UE_DATA1), + t3_read_reg(adapter, mc7->offset + A_MC7_UE_DATA2)); + } + + if (G_PE(cause)) { + mc7->stats.parity_err++; + CH_ALERT(adapter, "%s MC7 parity error 0x%x\n", + mc7->name, G_PE(cause)); + } + + if (cause & F_AE) { + u32 addr = 0; + + if (adapter->params.rev > 0) + addr = t3_read_reg(adapter, + mc7->offset + A_MC7_ERR_ADDR); + mc7->stats.addr_err++; + CH_ALERT(adapter, "%s MC7 address error: 0x%x\n", + mc7->name, addr); + } + + if (cause & MC7_INTR_FATAL) + t3_fatal_err(adapter); + + t3_write_reg(adapter, mc7->offset + A_MC7_INT_CAUSE, cause); +} + +#define XGM_INTR_FATAL (V_TXFIFO_PRTY_ERR(M_TXFIFO_PRTY_ERR) | \ + V_RXFIFO_PRTY_ERR(M_RXFIFO_PRTY_ERR)) +/* + * XGMAC interrupt handler. + */ +static int mac_intr_handler(struct adapter *adap, unsigned int idx) +{ + struct cmac *mac = &adap2pinfo(adap, idx)->mac; + u32 cause = t3_read_reg(adap, A_XGM_INT_CAUSE + mac->offset); + + if (cause & V_TXFIFO_PRTY_ERR(M_TXFIFO_PRTY_ERR)) { + mac->stats.tx_fifo_parity_err++; + CH_ALERT(adap, "port%d: MAC TX FIFO parity error\n", idx); + } + if (cause & V_RXFIFO_PRTY_ERR(M_RXFIFO_PRTY_ERR)) { + mac->stats.rx_fifo_parity_err++; + CH_ALERT(adap, "port%d: MAC RX FIFO parity error\n", idx); + } + if (cause & F_TXFIFO_UNDERRUN) + mac->stats.tx_fifo_urun++; + if (cause & F_RXFIFO_OVERFLOW) + mac->stats.rx_fifo_ovfl++; + if (cause & V_SERDES_LOS(M_SERDES_LOS)) + mac->stats.serdes_signal_loss++; + if (cause & F_XAUIPCSCTCERR) + mac->stats.xaui_pcs_ctc_err++; + if (cause & F_XAUIPCSALIGNCHANGE) + mac->stats.xaui_pcs_align_change++; + + t3_write_reg(adap, A_XGM_INT_CAUSE + mac->offset, cause); + if (cause & XGM_INTR_FATAL) + t3_fatal_err(adap); + return cause != 0; +} + +/* + * Interrupt handler for PHY events. + */ +int t3_phy_intr_handler(struct adapter *adapter) +{ + static const int intr_gpio_bits[] = { 8, 0x20 }; + + u32 i, cause = t3_read_reg(adapter, A_T3DBG_INT_CAUSE); + + for_each_port(adapter, i) { + if (cause & intr_gpio_bits[i]) { + struct cphy *phy = &adap2pinfo(adapter, i)->phy; + int phy_cause = phy->ops->intr_handler(phy); + + if (phy_cause & cphy_cause_link_change) + t3_link_changed(adapter, i); + if (phy_cause & cphy_cause_fifo_error) + phy->fifo_errors++; + } + } + + t3_write_reg(adapter, A_T3DBG_INT_CAUSE, cause); + return 0; +} + +/* + * T3 slow path (non-data) interrupt handler. + */ +int t3_slow_intr_handler(struct adapter *adapter) +{ + u32 cause = t3_read_reg(adapter, A_PL_INT_CAUSE0); + + cause &= adapter->slow_intr_mask; + if (!cause) + return 0; + if (cause & F_PCIM0) { + if (is_pcie(adapter)) + pcie_intr_handler(adapter); + else + pci_intr_handler(adapter); + } + if (cause & F_SGE3) + t3_sge_err_intr_handler(adapter); + if (cause & F_MC7_PMRX) + mc7_intr_handler(&adapter->pmrx); + if (cause & F_MC7_PMTX) + mc7_intr_handler(&adapter->pmtx); + if (cause & F_MC7_CM) + mc7_intr_handler(&adapter->cm); + if (cause & F_CIM) + cim_intr_handler(adapter); + if (cause & F_TP1) + tp_intr_handler(adapter); + if (cause & F_ULP2_RX) + ulprx_intr_handler(adapter); + if (cause & F_ULP2_TX) + ulptx_intr_handler(adapter); + if (cause & F_PM1_RX) + pmrx_intr_handler(adapter); + if (cause & F_PM1_TX) + pmtx_intr_handler(adapter); + if (cause & F_CPL_SWITCH) + cplsw_intr_handler(adapter); + if (cause & F_MPS0) + mps_intr_handler(adapter); + if (cause & F_MC5A) + t3_mc5_intr_handler(&adapter->mc5); + if (cause & F_XGMAC0_0) + mac_intr_handler(adapter, 0); + if (cause & F_XGMAC0_1) + mac_intr_handler(adapter, 1); + if (cause & F_T3DBG) + t3_os_ext_intr_handler(adapter); + + /* Clear the interrupts just processed. */ + t3_write_reg(adapter, A_PL_INT_CAUSE0, cause); + t3_read_reg(adapter, A_PL_INT_CAUSE0); /* flush */ + return 1; +} + +/** + * t3_intr_enable - enable interrupts + * @adapter: the adapter whose interrupts should be enabled + * + * Enable interrupts by setting the interrupt enable registers of the + * various HW modules and then enabling the top-level interrupt + * concentrator. + */ +void t3_intr_enable(struct adapter *adapter) +{ + static const struct addr_val_pair intr_en_avp[] = { + {A_SG_INT_ENABLE, SGE_INTR_MASK}, + {A_MC7_INT_ENABLE, MC7_INTR_MASK}, + {A_MC7_INT_ENABLE - MC7_PMRX_BASE_ADDR + MC7_PMTX_BASE_ADDR, + MC7_INTR_MASK}, + {A_MC7_INT_ENABLE - MC7_PMRX_BASE_ADDR + MC7_CM_BASE_ADDR, + MC7_INTR_MASK}, + {A_MC5_DB_INT_ENABLE, MC5_INTR_MASK}, + {A_ULPRX_INT_ENABLE, ULPRX_INTR_MASK}, + {A_TP_INT_ENABLE, 0x3bfffff}, + {A_PM1_TX_INT_ENABLE, PMTX_INTR_MASK}, + {A_PM1_RX_INT_ENABLE, PMRX_INTR_MASK}, + {A_CIM_HOST_INT_ENABLE, CIM_INTR_MASK}, + {A_MPS_INT_ENABLE, MPS_INTR_MASK}, + }; + + adapter->slow_intr_mask = PL_INTR_MASK; + + t3_write_regs(adapter, intr_en_avp, ARRAY_SIZE(intr_en_avp), 0); + + if (adapter->params.rev > 0) { + t3_write_reg(adapter, A_CPL_INTR_ENABLE, + CPLSW_INTR_MASK | F_CIM_OVFL_ERROR); + t3_write_reg(adapter, A_ULPTX_INT_ENABLE, + ULPTX_INTR_MASK | F_PBL_BOUND_ERR_CH0 | + F_PBL_BOUND_ERR_CH1); + } else { + t3_write_reg(adapter, A_CPL_INTR_ENABLE, CPLSW_INTR_MASK); + t3_write_reg(adapter, A_ULPTX_INT_ENABLE, ULPTX_INTR_MASK); + } + + t3_write_reg(adapter, A_T3DBG_GPIO_ACT_LOW, + adapter_info(adapter)->gpio_intr); + t3_write_reg(adapter, A_T3DBG_INT_ENABLE, + adapter_info(adapter)->gpio_intr); + if (is_pcie(adapter)) + t3_write_reg(adapter, A_PCIE_INT_ENABLE, PCIE_INTR_MASK); + else + t3_write_reg(adapter, A_PCIX_INT_ENABLE, PCIX_INTR_MASK); + t3_write_reg(adapter, A_PL_INT_ENABLE0, adapter->slow_intr_mask); + t3_read_reg(adapter, A_PL_INT_ENABLE0); /* flush */ +} + +/** + * t3_intr_disable - disable a card's interrupts + * @adapter: the adapter whose interrupts should be disabled + * + * Disable interrupts. We only disable the top-level interrupt + * concentrator and the SGE data interrupts. + */ +void t3_intr_disable(struct adapter *adapter) +{ + t3_write_reg(adapter, A_PL_INT_ENABLE0, 0); + t3_read_reg(adapter, A_PL_INT_ENABLE0); /* flush */ + adapter->slow_intr_mask = 0; +} + +/** + * t3_intr_clear - clear all interrupts + * @adapter: the adapter whose interrupts should be cleared + * + * Clears all interrupts. + */ +void t3_intr_clear(struct adapter *adapter) +{ + static const unsigned int cause_reg_addr[] = { + A_SG_INT_CAUSE, + A_SG_RSPQ_FL_STATUS, + A_PCIX_INT_CAUSE, + A_MC7_INT_CAUSE, + A_MC7_INT_CAUSE - MC7_PMRX_BASE_ADDR + MC7_PMTX_BASE_ADDR, + A_MC7_INT_CAUSE - MC7_PMRX_BASE_ADDR + MC7_CM_BASE_ADDR, + A_CIM_HOST_INT_CAUSE, + A_TP_INT_CAUSE, + A_MC5_DB_INT_CAUSE, + A_ULPRX_INT_CAUSE, + A_ULPTX_INT_CAUSE, + A_CPL_INTR_CAUSE, + A_PM1_TX_INT_CAUSE, + A_PM1_RX_INT_CAUSE, + A_MPS_INT_CAUSE, + A_T3DBG_INT_CAUSE, + }; + unsigned int i; + + /* Clear PHY and MAC interrupts for each port. */ + for_each_port(adapter, i) + t3_port_intr_clear(adapter, i); + + for (i = 0; i < ARRAY_SIZE(cause_reg_addr); ++i) + t3_write_reg(adapter, cause_reg_addr[i], 0xffffffff); + + t3_write_reg(adapter, A_PL_INT_CAUSE0, 0xffffffff); + t3_read_reg(adapter, A_PL_INT_CAUSE0); /* flush */ +} + +/** + * t3_port_intr_enable - enable port-specific interrupts + * @adapter: associated adapter + * @idx: index of port whose interrupts should be enabled + * + * Enable port-specific (i.e., MAC and PHY) interrupts for the given + * adapter port. + */ +void t3_port_intr_enable(struct adapter *adapter, int idx) +{ + struct cphy *phy = &adap2pinfo(adapter, idx)->phy; + + t3_write_reg(adapter, XGM_REG(A_XGM_INT_ENABLE, idx), XGM_INTR_MASK); + t3_read_reg(adapter, XGM_REG(A_XGM_INT_ENABLE, idx)); /* flush */ + phy->ops->intr_enable(phy); +} + +/** + * t3_port_intr_disable - disable port-specific interrupts + * @adapter: associated adapter + * @idx: index of port whose interrupts should be disabled + * + * Disable port-specific (i.e., MAC and PHY) interrupts for the given + * adapter port. + */ +void t3_port_intr_disable(struct adapter *adapter, int idx) +{ + struct cphy *phy = &adap2pinfo(adapter, idx)->phy; + + t3_write_reg(adapter, XGM_REG(A_XGM_INT_ENABLE, idx), 0); + t3_read_reg(adapter, XGM_REG(A_XGM_INT_ENABLE, idx)); /* flush */ + phy->ops->intr_disable(phy); +} + +/** + * t3_port_intr_clear - clear port-specific interrupts + * @adapter: associated adapter + * @idx: index of port whose interrupts to clear + * + * Clear port-specific (i.e., MAC and PHY) interrupts for the given + * adapter port. + */ +void t3_port_intr_clear(struct adapter *adapter, int idx) +{ + struct cphy *phy = &adap2pinfo(adapter, idx)->phy; + + t3_write_reg(adapter, XGM_REG(A_XGM_INT_CAUSE, idx), 0xffffffff); + t3_read_reg(adapter, XGM_REG(A_XGM_INT_CAUSE, idx)); /* flush */ + phy->ops->intr_clear(phy); +} + +/** + * t3_sge_write_context - write an SGE context + * @adapter: the adapter + * @id: the context id + * @type: the context type + * + * Program an SGE context with the values already loaded in the + * CONTEXT_DATA? registers. + */ +static int t3_sge_write_context(struct adapter *adapter, unsigned int id, + unsigned int type) +{ + t3_write_reg(adapter, A_SG_CONTEXT_MASK0, 0xffffffff); + t3_write_reg(adapter, A_SG_CONTEXT_MASK1, 0xffffffff); + t3_write_reg(adapter, A_SG_CONTEXT_MASK2, 0xffffffff); + t3_write_reg(adapter, A_SG_CONTEXT_MASK3, 0xffffffff); + t3_write_reg(adapter, A_SG_CONTEXT_CMD, + V_CONTEXT_CMD_OPCODE(1) | type | V_CONTEXT(id)); + return t3_wait_op_done(adapter, A_SG_CONTEXT_CMD, F_CONTEXT_CMD_BUSY, + 0, 5, 1); +} + +/** + * t3_sge_init_ecntxt - initialize an SGE egress context + * @adapter: the adapter to configure + * @id: the context id + * @gts_enable: whether to enable GTS for the context + * @type: the egress context type + * @respq: associated response queue + * @base_addr: base address of queue + * @size: number of queue entries + * @token: uP token + * @gen: initial generation value for the context + * @cidx: consumer pointer + * + * Initialize an SGE egress context and make it ready for use. If the + * platform allows concurrent context operations, the caller is + * responsible for appropriate locking. + */ +int t3_sge_init_ecntxt(struct adapter *adapter, unsigned int id, int gts_enable, + enum sge_context_type type, int respq, u64 base_addr, + unsigned int size, unsigned int token, int gen, + unsigned int cidx) +{ + unsigned int credits = type == SGE_CNTXT_OFLD ? 0 : FW_WR_NUM; + + if (base_addr & 0xfff) /* must be 4K aligned */ + return -EINVAL; + if (t3_read_reg(adapter, A_SG_CONTEXT_CMD) & F_CONTEXT_CMD_BUSY) + return -EBUSY; + + base_addr >>= 12; + t3_write_reg(adapter, A_SG_CONTEXT_DATA0, V_EC_INDEX(cidx) | + V_EC_CREDITS(credits) | V_EC_GTS(gts_enable)); + t3_write_reg(adapter, A_SG_CONTEXT_DATA1, V_EC_SIZE(size) | + V_EC_BASE_LO(base_addr & 0xffff)); + base_addr >>= 16; + t3_write_reg(adapter, A_SG_CONTEXT_DATA2, base_addr); + base_addr >>= 32; + t3_write_reg(adapter, A_SG_CONTEXT_DATA3, + V_EC_BASE_HI(base_addr & 0xf) | V_EC_RESPQ(respq) | + V_EC_TYPE(type) | V_EC_GEN(gen) | V_EC_UP_TOKEN(token) | + F_EC_VALID); + return t3_sge_write_context(adapter, id, F_EGRESS); +} + +/** + * t3_sge_init_flcntxt - initialize an SGE free-buffer list context + * @adapter: the adapter to configure + * @id: the context id + * @gts_enable: whether to enable GTS for the context + * @base_addr: base address of queue + * @size: number of queue entries + * @bsize: size of each buffer for this queue + * @cong_thres: threshold to signal congestion to upstream producers + * @gen: initial generation value for the context + * @cidx: consumer pointer + * + * Initialize an SGE free list context and make it ready for use. The + * caller is responsible for ensuring only one context operation occurs + * at a time. + */ +int t3_sge_init_flcntxt(struct adapter *adapter, unsigned int id, + int gts_enable, u64 base_addr, unsigned int size, + unsigned int bsize, unsigned int cong_thres, int gen, + unsigned int cidx) +{ + if (base_addr & 0xfff) /* must be 4K aligned */ + return -EINVAL; + if (t3_read_reg(adapter, A_SG_CONTEXT_CMD) & F_CONTEXT_CMD_BUSY) + return -EBUSY; + + base_addr >>= 12; + t3_write_reg(adapter, A_SG_CONTEXT_DATA0, base_addr); + base_addr >>= 32; + t3_write_reg(adapter, A_SG_CONTEXT_DATA1, + V_FL_BASE_HI((u32) base_addr) | + V_FL_INDEX_LO(cidx & M_FL_INDEX_LO)); + t3_write_reg(adapter, A_SG_CONTEXT_DATA2, V_FL_SIZE(size) | + V_FL_GEN(gen) | V_FL_INDEX_HI(cidx >> 12) | + V_FL_ENTRY_SIZE_LO(bsize & M_FL_ENTRY_SIZE_LO)); + t3_write_reg(adapter, A_SG_CONTEXT_DATA3, + V_FL_ENTRY_SIZE_HI(bsize >> (32 - S_FL_ENTRY_SIZE_LO)) | + V_FL_CONG_THRES(cong_thres) | V_FL_GTS(gts_enable)); + return t3_sge_write_context(adapter, id, F_FREELIST); +} + +/** + * t3_sge_init_rspcntxt - initialize an SGE response queue context + * @adapter: the adapter to configure + * @id: the context id + * @irq_vec_idx: MSI-X interrupt vector index, 0 if no MSI-X, -1 if no IRQ + * @base_addr: base address of queue + * @size: number of queue entries + * @fl_thres: threshold for selecting the normal or jumbo free list + * @gen: initial generation value for the context + * @cidx: consumer pointer + * + * Initialize an SGE response queue context and make it ready for use. + * The caller is responsible for ensuring only one context operation + * occurs at a time. + */ +int t3_sge_init_rspcntxt(struct adapter *adapter, unsigned int id, + int irq_vec_idx, u64 base_addr, unsigned int size, + unsigned int fl_thres, int gen, unsigned int cidx) +{ + unsigned int intr = 0; + + if (base_addr & 0xfff) /* must be 4K aligned */ + return -EINVAL; + if (t3_read_reg(adapter, A_SG_CONTEXT_CMD) & F_CONTEXT_CMD_BUSY) + return -EBUSY; + + base_addr >>= 12; + t3_write_reg(adapter, A_SG_CONTEXT_DATA0, V_CQ_SIZE(size) | + V_CQ_INDEX(cidx)); + t3_write_reg(adapter, A_SG_CONTEXT_DATA1, base_addr); + base_addr >>= 32; + if (irq_vec_idx >= 0) + intr = V_RQ_MSI_VEC(irq_vec_idx) | F_RQ_INTR_EN; + t3_write_reg(adapter, A_SG_CONTEXT_DATA2, + V_CQ_BASE_HI((u32) base_addr) | intr | V_RQ_GEN(gen)); + t3_write_reg(adapter, A_SG_CONTEXT_DATA3, fl_thres); + return t3_sge_write_context(adapter, id, F_RESPONSEQ); +} + +/** + * t3_sge_init_cqcntxt - initialize an SGE completion queue context + * @adapter: the adapter to configure + * @id: the context id + * @base_addr: base address of queue + * @size: number of queue entries + * @rspq: response queue for async notifications + * @ovfl_mode: CQ overflow mode + * @credits: completion queue credits + * @credit_thres: the credit threshold + * + * Initialize an SGE completion queue context and make it ready for use. + * The caller is responsible for ensuring only one context operation + * occurs at a time. + */ +int t3_sge_init_cqcntxt(struct adapter *adapter, unsigned int id, u64 base_addr, + unsigned int size, int rspq, int ovfl_mode, + unsigned int credits, unsigned int credit_thres) +{ + if (base_addr & 0xfff) /* must be 4K aligned */ + return -EINVAL; + if (t3_read_reg(adapter, A_SG_CONTEXT_CMD) & F_CONTEXT_CMD_BUSY) + return -EBUSY; + + base_addr >>= 12; + t3_write_reg(adapter, A_SG_CONTEXT_DATA0, V_CQ_SIZE(size)); + t3_write_reg(adapter, A_SG_CONTEXT_DATA1, base_addr); + base_addr >>= 32; + t3_write_reg(adapter, A_SG_CONTEXT_DATA2, + V_CQ_BASE_HI((u32) base_addr) | V_CQ_RSPQ(rspq) | + V_CQ_GEN(1) | V_CQ_OVERFLOW_MODE(ovfl_mode)); + t3_write_reg(adapter, A_SG_CONTEXT_DATA3, V_CQ_CREDITS(credits) | + V_CQ_CREDIT_THRES(credit_thres)); + return t3_sge_write_context(adapter, id, F_CQ); +} + +/** + * t3_sge_enable_ecntxt - enable/disable an SGE egress context + * @adapter: the adapter + * @id: the egress context id + * @enable: enable (1) or disable (0) the context + * + * Enable or disable an SGE egress context. The caller is responsible for + * ensuring only one context operation occurs at a time. + */ +int t3_sge_enable_ecntxt(struct adapter *adapter, unsigned int id, int enable) +{ + if (t3_read_reg(adapter, A_SG_CONTEXT_CMD) & F_CONTEXT_CMD_BUSY) + return -EBUSY; + + t3_write_reg(adapter, A_SG_CONTEXT_MASK0, 0); + t3_write_reg(adapter, A_SG_CONTEXT_MASK1, 0); + t3_write_reg(adapter, A_SG_CONTEXT_MASK2, 0); + t3_write_reg(adapter, A_SG_CONTEXT_MASK3, F_EC_VALID); + t3_write_reg(adapter, A_SG_CONTEXT_DATA3, V_EC_VALID(enable)); + t3_write_reg(adapter, A_SG_CONTEXT_CMD, + V_CONTEXT_CMD_OPCODE(1) | F_EGRESS | V_CONTEXT(id)); + return t3_wait_op_done(adapter, A_SG_CONTEXT_CMD, F_CONTEXT_CMD_BUSY, + 0, 5, 1); +} + +/** + * t3_sge_disable_fl - disable an SGE free-buffer list + * @adapter: the adapter + * @id: the free list context id + * + * Disable an SGE free-buffer list. The caller is responsible for + * ensuring only one context operation occurs at a time. + */ +int t3_sge_disable_fl(struct adapter *adapter, unsigned int id) +{ + if (t3_read_reg(adapter, A_SG_CONTEXT_CMD) & F_CONTEXT_CMD_BUSY) + return -EBUSY; + + t3_write_reg(adapter, A_SG_CONTEXT_MASK0, 0); + t3_write_reg(adapter, A_SG_CONTEXT_MASK1, 0); + t3_write_reg(adapter, A_SG_CONTEXT_MASK2, V_FL_SIZE(M_FL_SIZE)); + t3_write_reg(adapter, A_SG_CONTEXT_MASK3, 0); + t3_write_reg(adapter, A_SG_CONTEXT_DATA2, 0); + t3_write_reg(adapter, A_SG_CONTEXT_CMD, + V_CONTEXT_CMD_OPCODE(1) | F_FREELIST | V_CONTEXT(id)); + return t3_wait_op_done(adapter, A_SG_CONTEXT_CMD, F_CONTEXT_CMD_BUSY, + 0, 5, 1); +} + +/** + * t3_sge_disable_rspcntxt - disable an SGE response queue + * @adapter: the adapter + * @id: the response queue context id + * + * Disable an SGE response queue. The caller is responsible for + * ensuring only one context operation occurs at a time. + */ +int t3_sge_disable_rspcntxt(struct adapter *adapter, unsigned int id) +{ + if (t3_read_reg(adapter, A_SG_CONTEXT_CMD) & F_CONTEXT_CMD_BUSY) + return -EBUSY; + + t3_write_reg(adapter, A_SG_CONTEXT_MASK0, V_CQ_SIZE(M_CQ_SIZE)); + t3_write_reg(adapter, A_SG_CONTEXT_MASK1, 0); + t3_write_reg(adapter, A_SG_CONTEXT_MASK2, 0); + t3_write_reg(adapter, A_SG_CONTEXT_MASK3, 0); + t3_write_reg(adapter, A_SG_CONTEXT_DATA0, 0); + t3_write_reg(adapter, A_SG_CONTEXT_CMD, + V_CONTEXT_CMD_OPCODE(1) | F_RESPONSEQ | V_CONTEXT(id)); + return t3_wait_op_done(adapter, A_SG_CONTEXT_CMD, F_CONTEXT_CMD_BUSY, + 0, 5, 1); +} + +/** + * t3_sge_disable_cqcntxt - disable an SGE completion queue + * @adapter: the adapter + * @id: the completion queue context id + * + * Disable an SGE completion queue. The caller is responsible for + * ensuring only one context operation occurs at a time. + */ +int t3_sge_disable_cqcntxt(struct adapter *adapter, unsigned int id) +{ + if (t3_read_reg(adapter, A_SG_CONTEXT_CMD) & F_CONTEXT_CMD_BUSY) + return -EBUSY; + + t3_write_reg(adapter, A_SG_CONTEXT_MASK0, V_CQ_SIZE(M_CQ_SIZE)); + t3_write_reg(adapter, A_SG_CONTEXT_MASK1, 0); + t3_write_reg(adapter, A_SG_CONTEXT_MASK2, 0); + t3_write_reg(adapter, A_SG_CONTEXT_MASK3, 0); + t3_write_reg(adapter, A_SG_CONTEXT_DATA0, 0); + t3_write_reg(adapter, A_SG_CONTEXT_CMD, + V_CONTEXT_CMD_OPCODE(1) | F_CQ | V_CONTEXT(id)); + return t3_wait_op_done(adapter, A_SG_CONTEXT_CMD, F_CONTEXT_CMD_BUSY, + 0, 5, 1); +} + +/** + * t3_sge_cqcntxt_op - perform an operation on a completion queue context + * @adapter: the adapter + * @id: the context id + * @op: the operation to perform + * + * Perform the selected operation on an SGE completion queue context. + * The caller is responsible for ensuring only one context operation + * occurs at a time. + */ +int t3_sge_cqcntxt_op(struct adapter *adapter, unsigned int id, unsigned int op, + unsigned int credits) +{ + u32 val; + + if (t3_read_reg(adapter, A_SG_CONTEXT_CMD) & F_CONTEXT_CMD_BUSY) + return -EBUSY; + + t3_write_reg(adapter, A_SG_CONTEXT_DATA0, credits << 16); + t3_write_reg(adapter, A_SG_CONTEXT_CMD, V_CONTEXT_CMD_OPCODE(op) | + V_CONTEXT(id) | F_CQ); + if (t3_wait_op_done_val(adapter, A_SG_CONTEXT_CMD, F_CONTEXT_CMD_BUSY, + 0, 5, 1, &val)) + return -EIO; + + if (op >= 2 && op < 7) { + if (adapter->params.rev > 0) + return G_CQ_INDEX(val); + + t3_write_reg(adapter, A_SG_CONTEXT_CMD, + V_CONTEXT_CMD_OPCODE(0) | F_CQ | V_CONTEXT(id)); + if (t3_wait_op_done(adapter, A_SG_CONTEXT_CMD, + F_CONTEXT_CMD_BUSY, 0, 5, 1)) + return -EIO; + return G_CQ_INDEX(t3_read_reg(adapter, A_SG_CONTEXT_DATA0)); + } + return 0; +} + +/** + * t3_sge_read_context - read an SGE context + * @type: the context type + * @adapter: the adapter + * @id: the context id + * @data: holds the retrieved context + * + * Read an SGE egress context. The caller is responsible for ensuring + * only one context operation occurs at a time. + */ +static int t3_sge_read_context(unsigned int type, struct adapter *adapter, + unsigned int id, u32 data[4]) +{ + if (t3_read_reg(adapter, A_SG_CONTEXT_CMD) & F_CONTEXT_CMD_BUSY) + return -EBUSY; + + t3_write_reg(adapter, A_SG_CONTEXT_CMD, + V_CONTEXT_CMD_OPCODE(0) | type | V_CONTEXT(id)); + if (t3_wait_op_done(adapter, A_SG_CONTEXT_CMD, F_CONTEXT_CMD_BUSY, 0, + 5, 1)) + return -EIO; + data[0] = t3_read_reg(adapter, A_SG_CONTEXT_DATA0); + data[1] = t3_read_reg(adapter, A_SG_CONTEXT_DATA1); + data[2] = t3_read_reg(adapter, A_SG_CONTEXT_DATA2); + data[3] = t3_read_reg(adapter, A_SG_CONTEXT_DATA3); + return 0; +} + +/** + * t3_sge_read_ecntxt - read an SGE egress context + * @adapter: the adapter + * @id: the context id + * @data: holds the retrieved context + * + * Read an SGE egress context. The caller is responsible for ensuring + * only one context operation occurs at a time. + */ +int t3_sge_read_ecntxt(struct adapter *adapter, unsigned int id, u32 data[4]) +{ + if (id >= 65536) + return -EINVAL; + return t3_sge_read_context(F_EGRESS, adapter, id, data); +} + +/** + * t3_sge_read_cq - read an SGE CQ context + * @adapter: the adapter + * @id: the context id + * @data: holds the retrieved context + * + * Read an SGE CQ context. The caller is responsible for ensuring + * only one context operation occurs at a time. + */ +int t3_sge_read_cq(struct adapter *adapter, unsigned int id, u32 data[4]) +{ + if (id >= 65536) + return -EINVAL; + return t3_sge_read_context(F_CQ, adapter, id, data); +} + +/** + * t3_sge_read_fl - read an SGE free-list context + * @adapter: the adapter + * @id: the context id + * @data: holds the retrieved context + * + * Read an SGE free-list context. The caller is responsible for ensuring + * only one context operation occurs at a time. + */ +int t3_sge_read_fl(struct adapter *adapter, unsigned int id, u32 data[4]) +{ + if (id >= SGE_QSETS * 2) + return -EINVAL; + return t3_sge_read_context(F_FREELIST, adapter, id, data); +} + +/** + * t3_sge_read_rspq - read an SGE response queue context + * @adapter: the adapter + * @id: the context id + * @data: holds the retrieved context + * + * Read an SGE response queue context. The caller is responsible for + * ensuring only one context operation occurs at a time. + */ +int t3_sge_read_rspq(struct adapter *adapter, unsigned int id, u32 data[4]) +{ + if (id >= SGE_QSETS) + return -EINVAL; + return t3_sge_read_context(F_RESPONSEQ, adapter, id, data); +} + +/** + * t3_config_rss - configure Rx packet steering + * @adapter: the adapter + * @rss_config: RSS settings (written to TP_RSS_CONFIG) + * @cpus: values for the CPU lookup table (0xff terminated) + * @rspq: values for the response queue lookup table (0xffff terminated) + * + * Programs the receive packet steering logic. @cpus and @rspq provide + * the values for the CPU and response queue lookup tables. If they + * provide fewer values than the size of the tables the supplied values + * are used repeatedly until the tables are fully populated. + */ +void t3_config_rss(struct adapter *adapter, unsigned int rss_config, + const u8 * cpus, const u16 *rspq) +{ + int i, j, cpu_idx = 0, q_idx = 0; + + if (cpus) + for (i = 0; i < RSS_TABLE_SIZE; ++i) { + u32 val = i << 16; + + for (j = 0; j < 2; ++j) { + val |= (cpus[cpu_idx++] & 0x3f) << (8 * j); + if (cpus[cpu_idx] == 0xff) + cpu_idx = 0; + } + t3_write_reg(adapter, A_TP_RSS_LKP_TABLE, val); + } + + if (rspq) + for (i = 0; i < RSS_TABLE_SIZE; ++i) { + t3_write_reg(adapter, A_TP_RSS_MAP_TABLE, + (i << 16) | rspq[q_idx++]); + if (rspq[q_idx] == 0xffff) + q_idx = 0; + } + + t3_write_reg(adapter, A_TP_RSS_CONFIG, rss_config); +} + +/** + * t3_read_rss - read the contents of the RSS tables + * @adapter: the adapter + * @lkup: holds the contents of the RSS lookup table + * @map: holds the contents of the RSS map table + * + * Reads the contents of the receive packet steering tables. + */ +int t3_read_rss(struct adapter *adapter, u8 * lkup, u16 *map) +{ + int i; + u32 val; + + if (lkup) + for (i = 0; i < RSS_TABLE_SIZE; ++i) { + t3_write_reg(adapter, A_TP_RSS_LKP_TABLE, + 0xffff0000 | i); + val = t3_read_reg(adapter, A_TP_RSS_LKP_TABLE); + if (!(val & 0x80000000)) + return -EAGAIN; + *lkup++ = val; + *lkup++ = (val >> 8); + } + + if (map) + for (i = 0; i < RSS_TABLE_SIZE; ++i) { + t3_write_reg(adapter, A_TP_RSS_MAP_TABLE, + 0xffff0000 | i); + val = t3_read_reg(adapter, A_TP_RSS_MAP_TABLE); + if (!(val & 0x80000000)) + return -EAGAIN; + *map++ = val; + } + return 0; +} + +/** + * t3_tp_set_offload_mode - put TP in NIC/offload mode + * @adap: the adapter + * @enable: 1 to select offload mode, 0 for regular NIC + * + * Switches TP to NIC/offload mode. + */ +void t3_tp_set_offload_mode(struct adapter *adap, int enable) +{ + if (is_offload(adap) || !enable) + t3_set_reg_field(adap, A_TP_IN_CONFIG, F_NICMODE, + V_NICMODE(!enable)); +} + +/** + * pm_num_pages - calculate the number of pages of the payload memory + * @mem_size: the size of the payload memory + * @pg_size: the size of each payload memory page + * + * Calculate the number of pages, each of the given size, that fit in a + * memory of the specified size, respecting the HW requirement that the + * number of pages must be a multiple of 24. + */ +static inline unsigned int pm_num_pages(unsigned int mem_size, + unsigned int pg_size) +{ + unsigned int n = mem_size / pg_size; + + return n - n % 24; +} + +#define mem_region(adap, start, size, reg) \ + t3_write_reg((adap), A_ ## reg, (start)); \ + start += size + +/* + * partition_mem - partition memory and configure TP memory settings + * @adap: the adapter + * @p: the TP parameters + * + * Partitions context and payload memory and configures TP's memory + * registers. + */ +static void partition_mem(struct adapter *adap, const struct tp_params *p) +{ + unsigned int m, pstructs, tids = t3_mc5_size(&adap->mc5); + unsigned int timers = 0, timers_shift = 22; + + if (adap->params.rev > 0) { + if (tids <= 16 * 1024) { + timers = 1; + timers_shift = 16; + } else if (tids <= 64 * 1024) { + timers = 2; + timers_shift = 18; + } else if (tids <= 256 * 1024) { + timers = 3; + timers_shift = 20; + } + } + + t3_write_reg(adap, A_TP_PMM_SIZE, + p->chan_rx_size | (p->chan_tx_size >> 16)); + + t3_write_reg(adap, A_TP_PMM_TX_BASE, 0); + t3_write_reg(adap, A_TP_PMM_TX_PAGE_SIZE, p->tx_pg_size); + t3_write_reg(adap, A_TP_PMM_TX_MAX_PAGE, p->tx_num_pgs); + t3_set_reg_field(adap, A_TP_PARA_REG3, V_TXDATAACKIDX(M_TXDATAACKIDX), + V_TXDATAACKIDX(fls(p->tx_pg_size) - 12)); + + t3_write_reg(adap, A_TP_PMM_RX_BASE, 0); + t3_write_reg(adap, A_TP_PMM_RX_PAGE_SIZE, p->rx_pg_size); + t3_write_reg(adap, A_TP_PMM_RX_MAX_PAGE, p->rx_num_pgs); + + pstructs = p->rx_num_pgs + p->tx_num_pgs; + /* Add a bit of headroom and make multiple of 24 */ + pstructs += 48; + pstructs -= pstructs % 24; + t3_write_reg(adap, A_TP_CMM_MM_MAX_PSTRUCT, pstructs); + + m = tids * TCB_SIZE; + mem_region(adap, m, (64 << 10) * 64, SG_EGR_CNTX_BADDR); + mem_region(adap, m, (64 << 10) * 64, SG_CQ_CONTEXT_BADDR); + t3_write_reg(adap, A_TP_CMM_TIMER_BASE, V_CMTIMERMAXNUM(timers) | m); + m += ((p->ntimer_qs - 1) << timers_shift) + (1 << 22); + mem_region(adap, m, pstructs * 64, TP_CMM_MM_BASE); + mem_region(adap, m, 64 * (pstructs / 24), TP_CMM_MM_PS_FLST_BASE); + mem_region(adap, m, 64 * (p->rx_num_pgs / 24), TP_CMM_MM_RX_FLST_BASE); + mem_region(adap, m, 64 * (p->tx_num_pgs / 24), TP_CMM_MM_TX_FLST_BASE); + + m = (m + 4095) & ~0xfff; + t3_write_reg(adap, A_CIM_SDRAM_BASE_ADDR, m); + t3_write_reg(adap, A_CIM_SDRAM_ADDR_SIZE, p->cm_size - m); + + tids = (p->cm_size - m - (3 << 20)) / 3072 - 32; + m = t3_mc5_size(&adap->mc5) - adap->params.mc5.nservers - + adap->params.mc5.nfilters - adap->params.mc5.nroutes; + if (tids < m) + adap->params.mc5.nservers += m - tids; +} + +static inline void tp_wr_indirect(struct adapter *adap, unsigned int addr, + u32 val) +{ + t3_write_reg(adap, A_TP_PIO_ADDR, addr); + t3_write_reg(adap, A_TP_PIO_DATA, val); +} + +static void tp_config(struct adapter *adap, const struct tp_params *p) +{ + unsigned int v; + + t3_write_reg(adap, A_TP_GLOBAL_CONFIG, F_TXPACINGENABLE | F_PATHMTU | + F_IPCHECKSUMOFFLOAD | F_UDPCHECKSUMOFFLOAD | + F_TCPCHECKSUMOFFLOAD | V_IPTTL(64)); + t3_write_reg(adap, A_TP_TCP_OPTIONS, V_MTUDEFAULT(576) | + F_MTUENABLE | V_WINDOWSCALEMODE(1) | + V_TIMESTAMPSMODE(1) | V_SACKMODE(1) | V_SACKRX(1)); + t3_write_reg(adap, A_TP_DACK_CONFIG, V_AUTOSTATE3(1) | + V_AUTOSTATE2(1) | V_AUTOSTATE1(0) | + V_BYTETHRESHOLD(16384) | V_MSSTHRESHOLD(2) | + F_AUTOCAREFUL | F_AUTOENABLE | V_DACK_MODE(1)); + t3_set_reg_field(adap, A_TP_IN_CONFIG, F_IPV6ENABLE | F_NICMODE, + F_IPV6ENABLE | F_NICMODE); + t3_write_reg(adap, A_TP_TX_RESOURCE_LIMIT, 0x18141814); + t3_write_reg(adap, A_TP_PARA_REG4, 0x5050105); + t3_set_reg_field(adap, A_TP_PARA_REG6, + adap->params.rev > 0 ? F_ENABLEESND : F_T3A_ENABLEESND, + 0); + + v = t3_read_reg(adap, A_TP_PC_CONFIG); + v &= ~(F_ENABLEEPCMDAFULL | F_ENABLEOCSPIFULL); + t3_write_reg(adap, A_TP_PC_CONFIG, v | F_TXDEFERENABLE | + F_MODULATEUNIONMODE | F_HEARBEATDACK | + F_TXCONGESTIONMODE | F_RXCONGESTIONMODE); + + v = t3_read_reg(adap, A_TP_PC_CONFIG2); + v &= ~F_CHDRAFULL; + t3_write_reg(adap, A_TP_PC_CONFIG2, v); + + if (adap->params.rev > 0) { + tp_wr_indirect(adap, A_TP_EGRESS_CONFIG, F_REWRITEFORCETOSIZE); + t3_set_reg_field(adap, A_TP_PARA_REG3, F_TXPACEAUTO, + F_TXPACEAUTO); + t3_set_reg_field(adap, A_TP_PC_CONFIG, F_LOCKTID, F_LOCKTID); + t3_set_reg_field(adap, A_TP_PARA_REG3, 0, F_TXPACEAUTOSTRICT); + } else + t3_set_reg_field(adap, A_TP_PARA_REG3, 0, F_TXPACEFIXED); + + t3_write_reg(adap, A_TP_TX_MOD_QUEUE_WEIGHT1, 0x12121212); + t3_write_reg(adap, A_TP_TX_MOD_QUEUE_WEIGHT0, 0x12121212); + t3_write_reg(adap, A_TP_MOD_CHANNEL_WEIGHT, 0x1212); +} + +/* Desired TP timer resolution in usec */ +#define TP_TMR_RES 50 + +/* TCP timer values in ms */ +#define TP_DACK_TIMER 50 +#define TP_RTO_MIN 250 + +/** + * tp_set_timers - set TP timing parameters + * @adap: the adapter to set + * @core_clk: the core clock frequency in Hz + * + * Set TP's timing parameters, such as the various timer resolutions and + * the TCP timer values. + */ +static void tp_set_timers(struct adapter *adap, unsigned int core_clk) +{ + unsigned int tre = fls(core_clk / (1000000 / TP_TMR_RES)) - 1; + unsigned int dack_re = fls(core_clk / 5000) - 1; /* 200us */ + unsigned int tstamp_re = fls(core_clk / 1000); /* 1ms, at least */ + unsigned int tps = core_clk >> tre; + + t3_write_reg(adap, A_TP_TIMER_RESOLUTION, V_TIMERRESOLUTION(tre) | + V_DELAYEDACKRESOLUTION(dack_re) | + V_TIMESTAMPRESOLUTION(tstamp_re)); + t3_write_reg(adap, A_TP_DACK_TIMER, + (core_clk >> dack_re) / (1000 / TP_DACK_TIMER)); + t3_write_reg(adap, A_TP_TCP_BACKOFF_REG0, 0x3020100); + t3_write_reg(adap, A_TP_TCP_BACKOFF_REG1, 0x7060504); + t3_write_reg(adap, A_TP_TCP_BACKOFF_REG2, 0xb0a0908); + t3_write_reg(adap, A_TP_TCP_BACKOFF_REG3, 0xf0e0d0c); + t3_write_reg(adap, A_TP_SHIFT_CNT, V_SYNSHIFTMAX(6) | + V_RXTSHIFTMAXR1(4) | V_RXTSHIFTMAXR2(15) | + V_PERSHIFTBACKOFFMAX(8) | V_PERSHIFTMAX(8) | + V_KEEPALIVEMAX(9)); + +#define SECONDS * tps + + t3_write_reg(adap, A_TP_MSL, adap->params.rev > 0 ? 0 : 2 SECONDS); + t3_write_reg(adap, A_TP_RXT_MIN, tps / (1000 / TP_RTO_MIN)); + t3_write_reg(adap, A_TP_RXT_MAX, 64 SECONDS); + t3_write_reg(adap, A_TP_PERS_MIN, 5 SECONDS); + t3_write_reg(adap, A_TP_PERS_MAX, 64 SECONDS); + t3_write_reg(adap, A_TP_KEEP_IDLE, 7200 SECONDS); + t3_write_reg(adap, A_TP_KEEP_INTVL, 75 SECONDS); + t3_write_reg(adap, A_TP_INIT_SRTT, 3 SECONDS); + t3_write_reg(adap, A_TP_FINWAIT2_TIMER, 600 SECONDS); + +#undef SECONDS +} + +/** + * t3_tp_set_coalescing_size - set receive coalescing size + * @adap: the adapter + * @size: the receive coalescing size + * @psh: whether a set PSH bit should deliver coalesced data + * + * Set the receive coalescing size and PSH bit handling. + */ +int t3_tp_set_coalescing_size(struct adapter *adap, unsigned int size, int psh) +{ + u32 val; + + if (size > MAX_RX_COALESCING_LEN) + return -EINVAL; + + val = t3_read_reg(adap, A_TP_PARA_REG3); + val &= ~(F_RXCOALESCEENABLE | F_RXCOALESCEPSHEN); + + if (size) { + val |= F_RXCOALESCEENABLE; + if (psh) + val |= F_RXCOALESCEPSHEN; + t3_write_reg(adap, A_TP_PARA_REG2, V_RXCOALESCESIZE(size) | + V_MAXRXDATA(MAX_RX_COALESCING_LEN)); + } + t3_write_reg(adap, A_TP_PARA_REG3, val); + return 0; +} + +/** + * t3_tp_set_max_rxsize - set the max receive size + * @adap: the adapter + * @size: the max receive size + * + * Set TP's max receive size. This is the limit that applies when + * receive coalescing is disabled. + */ +void t3_tp_set_max_rxsize(struct adapter *adap, unsigned int size) +{ + t3_write_reg(adap, A_TP_PARA_REG7, + V_PMMAXXFERLEN0(size) | V_PMMAXXFERLEN1(size)); +} + +static void __devinit init_mtus(unsigned short mtus[]) +{ + /* + * See draft-mathis-plpmtud-00.txt for the values. The min is 88 so + * it can accomodate max size TCP/IP headers when SACK and timestamps + * are enabled and still have at least 8 bytes of payload. + */ + mtus[0] = 88; + mtus[1] = 256; + mtus[2] = 512; + mtus[3] = 576; + mtus[4] = 808; + mtus[5] = 1024; + mtus[6] = 1280; + mtus[7] = 1492; + mtus[8] = 1500; + mtus[9] = 2002; + mtus[10] = 2048; + mtus[11] = 4096; + mtus[12] = 4352; + mtus[13] = 8192; + mtus[14] = 9000; + mtus[15] = 9600; +} + +/* + * Initial congestion control parameters. + */ +static void __devinit init_cong_ctrl(unsigned short *a, unsigned short *b) +{ + a[0] = a[1] = a[2] = a[3] = a[4] = a[5] = a[6] = a[7] = a[8] = 1; + a[9] = 2; + a[10] = 3; + a[11] = 4; + a[12] = 5; + a[13] = 6; + a[14] = 7; + a[15] = 8; + a[16] = 9; + a[17] = 10; + a[18] = 14; + a[19] = 17; + a[20] = 21; + a[21] = 25; + a[22] = 30; + a[23] = 35; + a[24] = 45; + a[25] = 60; + a[26] = 80; + a[27] = 100; + a[28] = 200; + a[29] = 300; + a[30] = 400; + a[31] = 500; + + b[0] = b[1] = b[2] = b[3] = b[4] = b[5] = b[6] = b[7] = b[8] = 0; + b[9] = b[10] = 1; + b[11] = b[12] = 2; + b[13] = b[14] = b[15] = b[16] = 3; + b[17] = b[18] = b[19] = b[20] = b[21] = 4; + b[22] = b[23] = b[24] = b[25] = b[26] = b[27] = 5; + b[28] = b[29] = 6; + b[30] = b[31] = 7; +} + +/* The minimum additive increment value for the congestion control table */ +#define CC_MIN_INCR 2U + +/** + * t3_load_mtus - write the MTU and congestion control HW tables + * @adap: the adapter + * @mtus: the unrestricted values for the MTU table + * @alphs: the values for the congestion control alpha parameter + * @beta: the values for the congestion control beta parameter + * @mtu_cap: the maximum permitted effective MTU + * + * Write the MTU table with the supplied MTUs capping each at &mtu_cap. + * Update the high-speed congestion control table with the supplied alpha, + * beta, and MTUs. + */ +void t3_load_mtus(struct adapter *adap, unsigned short mtus[NMTUS], + unsigned short alpha[NCCTRL_WIN], + unsigned short beta[NCCTRL_WIN], unsigned short mtu_cap) +{ + static const unsigned int avg_pkts[NCCTRL_WIN] = { + 2, 6, 10, 14, 20, 28, 40, 56, 80, 112, 160, 224, 320, 448, 640, + 896, 1281, 1792, 2560, 3584, 5120, 7168, 10240, 14336, 20480, + 28672, 40960, 57344, 81920, 114688, 163840, 229376 + }; + + unsigned int i, w; + + for (i = 0; i < NMTUS; ++i) { + unsigned int mtu = min(mtus[i], mtu_cap); + unsigned int log2 = fls(mtu); + + if (!(mtu & ((1 << log2) >> 2))) /* round */ + log2--; + t3_write_reg(adap, A_TP_MTU_TABLE, + (i << 24) | (log2 << 16) | mtu); + + for (w = 0; w < NCCTRL_WIN; ++w) { + unsigned int inc; + + inc = max(((mtu - 40) * alpha[w]) / avg_pkts[w], + CC_MIN_INCR); + + t3_write_reg(adap, A_TP_CCTRL_TABLE, (i << 21) | + (w << 16) | (beta[w] << 13) | inc); + } + } +} + +/** + * t3_read_hw_mtus - returns the values in the HW MTU table + * @adap: the adapter + * @mtus: where to store the HW MTU values + * + * Reads the HW MTU table. + */ +void t3_read_hw_mtus(struct adapter *adap, unsigned short mtus[NMTUS]) +{ + int i; + + for (i = 0; i < NMTUS; ++i) { + unsigned int val; + + t3_write_reg(adap, A_TP_MTU_TABLE, 0xff000000 | i); + val = t3_read_reg(adap, A_TP_MTU_TABLE); + mtus[i] = val & 0x3fff; + } +} + +/** + * t3_get_cong_cntl_tab - reads the congestion control table + * @adap: the adapter + * @incr: where to store the alpha values + * + * Reads the additive increments programmed into the HW congestion + * control table. + */ +void t3_get_cong_cntl_tab(struct adapter *adap, + unsigned short incr[NMTUS][NCCTRL_WIN]) +{ + unsigned int mtu, w; + + for (mtu = 0; mtu < NMTUS; ++mtu) + for (w = 0; w < NCCTRL_WIN; ++w) { + t3_write_reg(adap, A_TP_CCTRL_TABLE, + 0xffff0000 | (mtu << 5) | w); + incr[mtu][w] = t3_read_reg(adap, A_TP_CCTRL_TABLE) & + 0x1fff; + } +} + +/** + * t3_tp_get_mib_stats - read TP's MIB counters + * @adap: the adapter + * @tps: holds the returned counter values + * + * Returns the values of TP's MIB counters. + */ +void t3_tp_get_mib_stats(struct adapter *adap, struct tp_mib_stats *tps) +{ + t3_read_indirect(adap, A_TP_MIB_INDEX, A_TP_MIB_RDATA, (u32 *) tps, + sizeof(*tps) / sizeof(u32), 0); +} + +#define ulp_region(adap, name, start, len) \ + t3_write_reg((adap), A_ULPRX_ ## name ## _LLIMIT, (start)); \ + t3_write_reg((adap), A_ULPRX_ ## name ## _ULIMIT, \ + (start) + (len) - 1); \ + start += len + +#define ulptx_region(adap, name, start, len) \ + t3_write_reg((adap), A_ULPTX_ ## name ## _LLIMIT, (start)); \ + t3_write_reg((adap), A_ULPTX_ ## name ## _ULIMIT, \ + (start) + (len) - 1) + +static void ulp_config(struct adapter *adap, const struct tp_params *p) +{ + unsigned int m = p->chan_rx_size; + + ulp_region(adap, ISCSI, m, p->chan_rx_size / 8); + ulp_region(adap, TDDP, m, p->chan_rx_size / 8); + ulptx_region(adap, TPT, m, p->chan_rx_size / 4); + ulp_region(adap, STAG, m, p->chan_rx_size / 4); + ulp_region(adap, RQ, m, p->chan_rx_size / 4); + ulptx_region(adap, PBL, m, p->chan_rx_size / 4); + ulp_region(adap, PBL, m, p->chan_rx_size / 4); + t3_write_reg(adap, A_ULPRX_TDDP_TAGMASK, 0xffffffff); +} + +void t3_config_trace_filter(struct adapter *adapter, + const struct trace_params *tp, int filter_index, + int invert, int enable) +{ + u32 addr, key[4], mask[4]; + + key[0] = tp->sport | (tp->sip << 16); + key[1] = (tp->sip >> 16) | (tp->dport << 16); + key[2] = tp->dip; + key[3] = tp->proto | (tp->vlan << 8) | (tp->intf << 20); + + mask[0] = tp->sport_mask | (tp->sip_mask << 16); + mask[1] = (tp->sip_mask >> 16) | (tp->dport_mask << 16); + mask[2] = tp->dip_mask; + mask[3] = tp->proto_mask | (tp->vlan_mask << 8) | (tp->intf_mask << 20); + + if (invert) + key[3] |= (1 << 29); + if (enable) + key[3] |= (1 << 28); + + addr = filter_index ? A_TP_RX_TRC_KEY0 : A_TP_TX_TRC_KEY0; + tp_wr_indirect(adapter, addr++, key[0]); + tp_wr_indirect(adapter, addr++, mask[0]); + tp_wr_indirect(adapter, addr++, key[1]); + tp_wr_indirect(adapter, addr++, mask[1]); + tp_wr_indirect(adapter, addr++, key[2]); + tp_wr_indirect(adapter, addr++, mask[2]); + tp_wr_indirect(adapter, addr++, key[3]); + tp_wr_indirect(adapter, addr, mask[3]); + t3_read_reg(adapter, A_TP_PIO_DATA); +} + +/** + * t3_config_sched - configure a HW traffic scheduler + * @adap: the adapter + * @kbps: target rate in Kbps + * @sched: the scheduler index + * + * Configure a HW scheduler for the target rate + */ +int t3_config_sched(struct adapter *adap, unsigned int kbps, int sched) +{ + unsigned int v, tps, cpt, bpt, delta, mindelta = ~0; + unsigned int clk = adap->params.vpd.cclk * 1000; + unsigned int selected_cpt = 0, selected_bpt = 0; + + if (kbps > 0) { + kbps *= 125; /* -> bytes */ + for (cpt = 1; cpt <= 255; cpt++) { + tps = clk / cpt; + bpt = (kbps + tps / 2) / tps; + if (bpt > 0 && bpt <= 255) { + v = bpt * tps; + delta = v >= kbps ? v - kbps : kbps - v; + if (delta <= mindelta) { + mindelta = delta; + selected_cpt = cpt; + selected_bpt = bpt; + } + } else if (selected_cpt) + break; + } + if (!selected_cpt) + return -EINVAL; + } + t3_write_reg(adap, A_TP_TM_PIO_ADDR, + A_TP_TX_MOD_Q1_Q0_RATE_LIMIT - sched / 2); + v = t3_read_reg(adap, A_TP_TM_PIO_DATA); + if (sched & 1) + v = (v & 0xffff) | (selected_cpt << 16) | (selected_bpt << 24); + else + v = (v & 0xffff0000) | selected_cpt | (selected_bpt << 8); + t3_write_reg(adap, A_TP_TM_PIO_DATA, v); + return 0; +} + +static int tp_init(struct adapter *adap, const struct tp_params *p) +{ + int busy = 0; + + tp_config(adap, p); + t3_set_vlan_accel(adap, 3, 0); + + if (is_offload(adap)) { + tp_set_timers(adap, adap->params.vpd.cclk * 1000); + t3_write_reg(adap, A_TP_RESET, F_FLSTINITENABLE); + busy = t3_wait_op_done(adap, A_TP_RESET, F_FLSTINITENABLE, + 0, 1000, 5); + if (busy) + CH_ERR(adap, "TP initialization timed out\n"); + } + + if (!busy) + t3_write_reg(adap, A_TP_RESET, F_TPRESET); + return busy; +} + +int t3_mps_set_active_ports(struct adapter *adap, unsigned int port_mask) +{ + if (port_mask & ~((1 << adap->params.nports) - 1)) + return -EINVAL; + t3_set_reg_field(adap, A_MPS_CFG, F_PORT1ACTIVE | F_PORT0ACTIVE, + port_mask << S_PORT0ACTIVE); + return 0; +} + +/* + * Perform the bits of HW initialization that are dependent on the number + * of available ports. + */ +static void init_hw_for_avail_ports(struct adapter *adap, int nports) +{ + int i; + + if (nports == 1) { + t3_set_reg_field(adap, A_ULPRX_CTL, F_ROUND_ROBIN, 0); + t3_set_reg_field(adap, A_ULPTX_CONFIG, F_CFG_RR_ARB, 0); + t3_write_reg(adap, A_MPS_CFG, F_TPRXPORTEN | F_TPTXPORT0EN | + F_PORT0ACTIVE | F_ENFORCEPKT); + t3_write_reg(adap, A_PM1_TX_CFG, 0xc000c000); + } else { + t3_set_reg_field(adap, A_ULPRX_CTL, 0, F_ROUND_ROBIN); + t3_set_reg_field(adap, A_ULPTX_CONFIG, 0, F_CFG_RR_ARB); + t3_write_reg(adap, A_ULPTX_DMA_WEIGHT, + V_D1_WEIGHT(16) | V_D0_WEIGHT(16)); + t3_write_reg(adap, A_MPS_CFG, F_TPTXPORT0EN | F_TPTXPORT1EN | + F_TPRXPORTEN | F_PORT0ACTIVE | F_PORT1ACTIVE | + F_ENFORCEPKT); + t3_write_reg(adap, A_PM1_TX_CFG, 0x80008000); + t3_set_reg_field(adap, A_TP_PC_CONFIG, 0, F_TXTOSQUEUEMAPMODE); + t3_write_reg(adap, A_TP_TX_MOD_QUEUE_REQ_MAP, + V_TX_MOD_QUEUE_REQ_MAP(0xaa)); + for (i = 0; i < 16; i++) + t3_write_reg(adap, A_TP_TX_MOD_QUE_TABLE, + (i << 16) | 0x1010); + } +} + +static int calibrate_xgm(struct adapter *adapter) +{ + if (uses_xaui(adapter)) { + unsigned int v, i; + + for (i = 0; i < 5; ++i) { + t3_write_reg(adapter, A_XGM_XAUI_IMP, 0); + t3_read_reg(adapter, A_XGM_XAUI_IMP); + msleep(1); + v = t3_read_reg(adapter, A_XGM_XAUI_IMP); + if (!(v & (F_XGM_CALFAULT | F_CALBUSY))) { + t3_write_reg(adapter, A_XGM_XAUI_IMP, + V_XAUIIMP(G_CALIMP(v) >> 2)); + return 0; + } + } + CH_ERR(adapter, "MAC calibration failed\n"); + return -1; + } else { + t3_write_reg(adapter, A_XGM_RGMII_IMP, + V_RGMIIIMPPD(2) | V_RGMIIIMPPU(3)); + t3_set_reg_field(adapter, A_XGM_RGMII_IMP, F_XGM_IMPSETUPDATE, + F_XGM_IMPSETUPDATE); + } + return 0; +} + +static void calibrate_xgm_t3b(struct adapter *adapter) +{ + if (!uses_xaui(adapter)) { + t3_write_reg(adapter, A_XGM_RGMII_IMP, F_CALRESET | + F_CALUPDATE | V_RGMIIIMPPD(2) | V_RGMIIIMPPU(3)); + t3_set_reg_field(adapter, A_XGM_RGMII_IMP, F_CALRESET, 0); + t3_set_reg_field(adapter, A_XGM_RGMII_IMP, 0, + F_XGM_IMPSETUPDATE); + t3_set_reg_field(adapter, A_XGM_RGMII_IMP, F_XGM_IMPSETUPDATE, + 0); + t3_set_reg_field(adapter, A_XGM_RGMII_IMP, F_CALUPDATE, 0); + t3_set_reg_field(adapter, A_XGM_RGMII_IMP, 0, F_CALUPDATE); + } +} + +struct mc7_timing_params { + unsigned char ActToPreDly; + unsigned char ActToRdWrDly; + unsigned char PreCyc; + unsigned char RefCyc[5]; + unsigned char BkCyc; + unsigned char WrToRdDly; + unsigned char RdToWrDly; +}; + +/* + * Write a value to a register and check that the write completed. These + * writes normally complete in a cycle or two, so one read should suffice. + * The very first read exists to flush the posted write to the device. + */ +static int wrreg_wait(struct adapter *adapter, unsigned int addr, u32 val) +{ + t3_write_reg(adapter, addr, val); + t3_read_reg(adapter, addr); /* flush */ + if (!(t3_read_reg(adapter, addr) & F_BUSY)) + return 0; + CH_ERR(adapter, "write to MC7 register 0x%x timed out\n", addr); + return -EIO; +} + +static int mc7_init(struct mc7 *mc7, unsigned int mc7_clock, int mem_type) +{ + static const unsigned int mc7_mode[] = { + 0x632, 0x642, 0x652, 0x432, 0x442 + }; + static const struct mc7_timing_params mc7_timings[] = { + {12, 3, 4, {20, 28, 34, 52, 0}, 15, 6, 4}, + {12, 4, 5, {20, 28, 34, 52, 0}, 16, 7, 4}, + {12, 5, 6, {20, 28, 34, 52, 0}, 17, 8, 4}, + {9, 3, 4, {15, 21, 26, 39, 0}, 12, 6, 4}, + {9, 4, 5, {15, 21, 26, 39, 0}, 13, 7, 4} + }; + + u32 val; + unsigned int width, density, slow, attempts; + struct adapter *adapter = mc7->adapter; + const struct mc7_timing_params *p = &mc7_timings[mem_type]; + + val = t3_read_reg(adapter, mc7->offset + A_MC7_CFG); + slow = val & F_SLOW; + width = G_WIDTH(val); + density = G_DEN(val); + + t3_write_reg(adapter, mc7->offset + A_MC7_CFG, val | F_IFEN); + val = t3_read_reg(adapter, mc7->offset + A_MC7_CFG); /* flush */ + msleep(1); + + if (!slow) { + t3_write_reg(adapter, mc7->offset + A_MC7_CAL, F_SGL_CAL_EN); + t3_read_reg(adapter, mc7->offset + A_MC7_CAL); + msleep(1); + if (t3_read_reg(adapter, mc7->offset + A_MC7_CAL) & + (F_BUSY | F_SGL_CAL_EN | F_CAL_FAULT)) { + CH_ERR(adapter, "%s MC7 calibration timed out\n", + mc7->name); + goto out_fail; + } + } + + t3_write_reg(adapter, mc7->offset + A_MC7_PARM, + V_ACTTOPREDLY(p->ActToPreDly) | + V_ACTTORDWRDLY(p->ActToRdWrDly) | V_PRECYC(p->PreCyc) | + V_REFCYC(p->RefCyc[density]) | V_BKCYC(p->BkCyc) | + V_WRTORDDLY(p->WrToRdDly) | V_RDTOWRDLY(p->RdToWrDly)); + + t3_write_reg(adapter, mc7->offset + A_MC7_CFG, + val | F_CLKEN | F_TERM150); + t3_read_reg(adapter, mc7->offset + A_MC7_CFG); /* flush */ + + if (!slow) + t3_set_reg_field(adapter, mc7->offset + A_MC7_DLL, F_DLLENB, + F_DLLENB); + udelay(1); + + val = slow ? 3 : 6; + if (wrreg_wait(adapter, mc7->offset + A_MC7_PRE, 0) || + wrreg_wait(adapter, mc7->offset + A_MC7_EXT_MODE2, 0) || + wrreg_wait(adapter, mc7->offset + A_MC7_EXT_MODE3, 0) || + wrreg_wait(adapter, mc7->offset + A_MC7_EXT_MODE1, val)) + goto out_fail; + + if (!slow) { + t3_write_reg(adapter, mc7->offset + A_MC7_MODE, 0x100); + t3_set_reg_field(adapter, mc7->offset + A_MC7_DLL, F_DLLRST, 0); + udelay(5); + } + + if (wrreg_wait(adapter, mc7->offset + A_MC7_PRE, 0) || + wrreg_wait(adapter, mc7->offset + A_MC7_REF, 0) || + wrreg_wait(adapter, mc7->offset + A_MC7_REF, 0) || + wrreg_wait(adapter, mc7->offset + A_MC7_MODE, + mc7_mode[mem_type]) || + wrreg_wait(adapter, mc7->offset + A_MC7_EXT_MODE1, val | 0x380) || + wrreg_wait(adapter, mc7->offset + A_MC7_EXT_MODE1, val)) + goto out_fail; + + /* clock value is in KHz */ + mc7_clock = mc7_clock * 7812 + mc7_clock / 2; /* ns */ + mc7_clock /= 1000000; /* KHz->MHz, ns->us */ + + t3_write_reg(adapter, mc7->offset + A_MC7_REF, + F_PERREFEN | V_PREREFDIV(mc7_clock)); + t3_read_reg(adapter, mc7->offset + A_MC7_REF); /* flush */ + + t3_write_reg(adapter, mc7->offset + A_MC7_ECC, F_ECCGENEN | F_ECCCHKEN); + t3_write_reg(adapter, mc7->offset + A_MC7_BIST_DATA, 0); + t3_write_reg(adapter, mc7->offset + A_MC7_BIST_ADDR_BEG, 0); + t3_write_reg(adapter, mc7->offset + A_MC7_BIST_ADDR_END, + (mc7->size << width) - 1); + t3_write_reg(adapter, mc7->offset + A_MC7_BIST_OP, V_OP(1)); + t3_read_reg(adapter, mc7->offset + A_MC7_BIST_OP); /* flush */ + + attempts = 50; + do { + msleep(250); + val = t3_read_reg(adapter, mc7->offset + A_MC7_BIST_OP); + } while ((val & F_BUSY) && --attempts); + if (val & F_BUSY) { + CH_ERR(adapter, "%s MC7 BIST timed out\n", mc7->name); + goto out_fail; + } + + /* Enable normal memory accesses. */ + t3_set_reg_field(adapter, mc7->offset + A_MC7_CFG, 0, F_RDY); + return 0; + +out_fail: + return -1; +} + +static void config_pcie(struct adapter *adap) +{ + static const u16 ack_lat[4][6] = { + {237, 416, 559, 1071, 2095, 4143}, + {128, 217, 289, 545, 1057, 2081}, + {73, 118, 154, 282, 538, 1050}, + {67, 107, 86, 150, 278, 534} + }; + static const u16 rpl_tmr[4][6] = { + {711, 1248, 1677, 3213, 6285, 12429}, + {384, 651, 867, 1635, 3171, 6243}, + {219, 354, 462, 846, 1614, 3150}, + {201, 321, 258, 450, 834, 1602} + }; + + u16 val; + unsigned int log2_width, pldsize; + unsigned int fst_trn_rx, fst_trn_tx, acklat, rpllmt; + + pci_read_config_word(adap->pdev, + adap->params.pci.pcie_cap_addr + PCI_EXP_DEVCTL, + &val); + pldsize = (val & PCI_EXP_DEVCTL_PAYLOAD) >> 5; + pci_read_config_word(adap->pdev, + adap->params.pci.pcie_cap_addr + PCI_EXP_LNKCTL, + &val); + + fst_trn_tx = G_NUMFSTTRNSEQ(t3_read_reg(adap, A_PCIE_PEX_CTRL0)); + fst_trn_rx = adap->params.rev == 0 ? fst_trn_tx : + G_NUMFSTTRNSEQRX(t3_read_reg(adap, A_PCIE_MODE)); + log2_width = fls(adap->params.pci.width) - 1; + acklat = ack_lat[log2_width][pldsize]; + if (val & 1) /* check LOsEnable */ + acklat += fst_trn_tx * 4; + rpllmt = rpl_tmr[log2_width][pldsize] + fst_trn_rx * 4; + + if (adap->params.rev == 0) + t3_set_reg_field(adap, A_PCIE_PEX_CTRL1, + V_T3A_ACKLAT(M_T3A_ACKLAT), + V_T3A_ACKLAT(acklat)); + else + t3_set_reg_field(adap, A_PCIE_PEX_CTRL1, V_ACKLAT(M_ACKLAT), + V_ACKLAT(acklat)); + + t3_set_reg_field(adap, A_PCIE_PEX_CTRL0, V_REPLAYLMT(M_REPLAYLMT), + V_REPLAYLMT(rpllmt)); + + t3_write_reg(adap, A_PCIE_PEX_ERR, 0xffffffff); + t3_set_reg_field(adap, A_PCIE_CFG, F_PCIE_CLIDECEN, F_PCIE_CLIDECEN); +} + +/* + * Initialize and configure T3 HW modules. This performs the + * initialization steps that need to be done once after a card is reset. + * MAC and PHY initialization is handled separarely whenever a port is enabled. + * + * fw_params are passed to FW and their value is platform dependent. Only the + * top 8 bits are available for use, the rest must be 0. + */ +int t3_init_hw(struct adapter *adapter, u32 fw_params) +{ + int err = -EIO, attempts = 100; + const struct vpd_params *vpd = &adapter->params.vpd; + + if (adapter->params.rev > 0) + calibrate_xgm_t3b(adapter); + else if (calibrate_xgm(adapter)) + goto out_err; + + if (vpd->mclk) { + partition_mem(adapter, &adapter->params.tp); + + if (mc7_init(&adapter->pmrx, vpd->mclk, vpd->mem_timing) || + mc7_init(&adapter->pmtx, vpd->mclk, vpd->mem_timing) || + mc7_init(&adapter->cm, vpd->mclk, vpd->mem_timing) || + t3_mc5_init(&adapter->mc5, adapter->params.mc5.nservers, + adapter->params.mc5.nfilters, + adapter->params.mc5.nroutes)) + goto out_err; + } + + if (tp_init(adapter, &adapter->params.tp)) + goto out_err; + + t3_tp_set_coalescing_size(adapter, + min(adapter->params.sge.max_pkt_size, + MAX_RX_COALESCING_LEN), 1); + t3_tp_set_max_rxsize(adapter, + min(adapter->params.sge.max_pkt_size, 16384U)); + ulp_config(adapter, &adapter->params.tp); + + if (is_pcie(adapter)) + config_pcie(adapter); + else + t3_set_reg_field(adapter, A_PCIX_CFG, 0, F_CLIDECEN); + + t3_write_reg(adapter, A_PM1_RX_CFG, 0xf000f000); + init_hw_for_avail_ports(adapter, adapter->params.nports); + t3_sge_init(adapter, &adapter->params.sge); + + t3_write_reg(adapter, A_CIM_HOST_ACC_DATA, vpd->uclk | fw_params); + t3_write_reg(adapter, A_CIM_BOOT_CFG, + V_BOOTADDR(FW_FLASH_BOOT_ADDR >> 2)); + t3_read_reg(adapter, A_CIM_BOOT_CFG); /* flush */ + + do { /* wait for uP to initialize */ + msleep(20); + } while (t3_read_reg(adapter, A_CIM_HOST_ACC_DATA) && --attempts); + if (!attempts) + goto out_err; + + err = 0; +out_err: + return err; +} + +/** + * get_pci_mode - determine a card's PCI mode + * @adapter: the adapter + * @p: where to store the PCI settings + * + * Determines a card's PCI mode and associated parameters, such as speed + * and width. + */ +static void __devinit get_pci_mode(struct adapter *adapter, + struct pci_params *p) +{ + static unsigned short speed_map[] = { 33, 66, 100, 133 }; + u32 pci_mode, pcie_cap; + + pcie_cap = pci_find_capability(adapter->pdev, PCI_CAP_ID_EXP); + if (pcie_cap) { + u16 val; + + p->variant = PCI_VARIANT_PCIE; + p->pcie_cap_addr = pcie_cap; + pci_read_config_word(adapter->pdev, pcie_cap + PCI_EXP_LNKSTA, + &val); + p->width = (val >> 4) & 0x3f; + return; + } + + pci_mode = t3_read_reg(adapter, A_PCIX_MODE); + p->speed = speed_map[G_PCLKRANGE(pci_mode)]; + p->width = (pci_mode & F_64BIT) ? 64 : 32; + pci_mode = G_PCIXINITPAT(pci_mode); + if (pci_mode == 0) + p->variant = PCI_VARIANT_PCI; + else if (pci_mode < 4) + p->variant = PCI_VARIANT_PCIX_MODE1_PARITY; + else if (pci_mode < 8) + p->variant = PCI_VARIANT_PCIX_MODE1_ECC; + else + p->variant = PCI_VARIANT_PCIX_266_MODE2; +} + +/** + * init_link_config - initialize a link's SW state + * @lc: structure holding the link state + * @ai: information about the current card + * + * Initializes the SW state maintained for each link, including the link's + * capabilities and default speed/duplex/flow-control/autonegotiation + * settings. + */ +static void __devinit init_link_config(struct link_config *lc, + unsigned int caps) +{ + lc->supported = caps; + lc->requested_speed = lc->speed = SPEED_INVALID; + lc->requested_duplex = lc->duplex = DUPLEX_INVALID; + lc->requested_fc = lc->fc = PAUSE_RX | PAUSE_TX; + if (lc->supported & SUPPORTED_Autoneg) { + lc->advertising = lc->supported; + lc->autoneg = AUTONEG_ENABLE; + lc->requested_fc |= PAUSE_AUTONEG; + } else { + lc->advertising = 0; + lc->autoneg = AUTONEG_DISABLE; + } +} + +/** + * mc7_calc_size - calculate MC7 memory size + * @cfg: the MC7 configuration + * + * Calculates the size of an MC7 memory in bytes from the value of its + * configuration register. + */ +static unsigned int __devinit mc7_calc_size(u32 cfg) +{ + unsigned int width = G_WIDTH(cfg); + unsigned int banks = !!(cfg & F_BKS) + 1; + unsigned int org = !!(cfg & F_ORG) + 1; + unsigned int density = G_DEN(cfg); + unsigned int MBs = ((256 << density) * banks) / (org << width); + + return MBs << 20; +} + +static void __devinit mc7_prep(struct adapter *adapter, struct mc7 *mc7, + unsigned int base_addr, const char *name) +{ + u32 cfg; + + mc7->adapter = adapter; + mc7->name = name; + mc7->offset = base_addr - MC7_PMRX_BASE_ADDR; + cfg = t3_read_reg(adapter, mc7->offset + A_MC7_CFG); + mc7->size = mc7_calc_size(cfg); + mc7->width = G_WIDTH(cfg); +} + +void mac_prep(struct cmac *mac, struct adapter *adapter, int index) +{ + mac->adapter = adapter; + mac->offset = (XGMAC0_1_BASE_ADDR - XGMAC0_0_BASE_ADDR) * index; + mac->nucast = 1; + + if (adapter->params.rev == 0 && uses_xaui(adapter)) { + t3_write_reg(adapter, A_XGM_SERDES_CTRL + mac->offset, + is_10G(adapter) ? 0x2901c04 : 0x2301c04); + t3_set_reg_field(adapter, A_XGM_PORT_CFG + mac->offset, + F_ENRGMII, 0); + } +} + +void early_hw_init(struct adapter *adapter, const struct adapter_info *ai) +{ + u32 val = V_PORTSPEED(is_10G(adapter) ? 3 : 2); + + mi1_init(adapter, ai); + t3_write_reg(adapter, A_I2C_CFG, /* set for 80KHz */ + V_I2C_CLKDIV(adapter->params.vpd.cclk / 80 - 1)); + t3_write_reg(adapter, A_T3DBG_GPIO_EN, + ai->gpio_out | F_GPIO0_OEN | F_GPIO0_OUT_VAL); + + if (adapter->params.rev == 0 || !uses_xaui(adapter)) + val |= F_ENRGMII; + + /* Enable MAC clocks so we can access the registers */ + t3_write_reg(adapter, A_XGM_PORT_CFG, val); + t3_read_reg(adapter, A_XGM_PORT_CFG); + + val |= F_CLKDIVRESET_; + t3_write_reg(adapter, A_XGM_PORT_CFG, val); + t3_read_reg(adapter, A_XGM_PORT_CFG); + t3_write_reg(adapter, XGM_REG(A_XGM_PORT_CFG, 1), val); + t3_read_reg(adapter, A_XGM_PORT_CFG); +} + +/* + * Reset the adapter. PCIe cards lose their config space during reset, PCI-X + * ones don't. + */ +int t3_reset_adapter(struct adapter *adapter) +{ + int i; + uint16_t devid = 0; + + if (is_pcie(adapter)) + pci_save_state(adapter->pdev); + t3_write_reg(adapter, A_PL_RST, F_CRSTWRM | F_CRSTWRMMODE); + + /* + * Delay. Give Some time to device to reset fully. + * XXX The delay time should be modified. + */ + for (i = 0; i < 10; i++) { + msleep(50); + pci_read_config_word(adapter->pdev, 0x00, &devid); + if (devid == 0x1425) + break; + } + + if (devid != 0x1425) + return -1; + + if (is_pcie(adapter)) + pci_restore_state(adapter->pdev); + return 0; +} + +/* + * Initialize adapter SW state for the various HW modules, set initial values + * for some adapter tunables, take PHYs out of reset, and initialize the MDIO + * interface. + */ +int __devinit t3_prep_adapter(struct adapter *adapter, + const struct adapter_info *ai, int reset) +{ + int ret; + unsigned int i, j = 0; + + get_pci_mode(adapter, &adapter->params.pci); + + adapter->params.info = ai; + adapter->params.nports = ai->nports; + adapter->params.rev = t3_read_reg(adapter, A_PL_REV); + adapter->params.linkpoll_period = 0; + adapter->params.stats_update_period = is_10G(adapter) ? + MAC_STATS_ACCUM_SECS : (MAC_STATS_ACCUM_SECS * 10); + adapter->params.pci.vpd_cap_addr = + pci_find_capability(adapter->pdev, PCI_CAP_ID_VPD); + ret = get_vpd_params(adapter, &adapter->params.vpd); + if (ret < 0) + return ret; + + if (reset && t3_reset_adapter(adapter)) + return -1; + + t3_sge_prep(adapter, &adapter->params.sge); + + if (adapter->params.vpd.mclk) { + struct tp_params *p = &adapter->params.tp; + + mc7_prep(adapter, &adapter->pmrx, MC7_PMRX_BASE_ADDR, "PMRX"); + mc7_prep(adapter, &adapter->pmtx, MC7_PMTX_BASE_ADDR, "PMTX"); + mc7_prep(adapter, &adapter->cm, MC7_CM_BASE_ADDR, "CM"); + + p->nchan = ai->nports; + p->pmrx_size = t3_mc7_size(&adapter->pmrx); + p->pmtx_size = t3_mc7_size(&adapter->pmtx); + p->cm_size = t3_mc7_size(&adapter->cm); + p->chan_rx_size = p->pmrx_size / 2; /* only 1 Rx channel */ + p->chan_tx_size = p->pmtx_size / p->nchan; + p->rx_pg_size = 64 * 1024; + p->tx_pg_size = is_10G(adapter) ? 64 * 1024 : 16 * 1024; + p->rx_num_pgs = pm_num_pages(p->chan_rx_size, p->rx_pg_size); + p->tx_num_pgs = pm_num_pages(p->chan_tx_size, p->tx_pg_size); + p->ntimer_qs = p->cm_size >= (128 << 20) || + adapter->params.rev > 0 ? 12 : 6; + + adapter->params.mc5.nservers = DEFAULT_NSERVERS; + adapter->params.mc5.nfilters = adapter->params.rev > 0 ? + DEFAULT_NFILTERS : 0; + adapter->params.mc5.nroutes = 0; + t3_mc5_prep(adapter, &adapter->mc5, MC5_MODE_144_BIT); + + init_mtus(adapter->params.mtus); + init_cong_ctrl(adapter->params.a_wnd, adapter->params.b_wnd); + } + + early_hw_init(adapter, ai); + + for_each_port(adapter, i) { + u8 hw_addr[6]; + struct port_info *p = adap2pinfo(adapter, i); + + while (!adapter->params.vpd.port_type[j]) + ++j; + + p->port_type = &port_types[adapter->params.vpd.port_type[j]]; + p->port_type->phy_prep(&p->phy, adapter, ai->phy_base_addr + j, + ai->mdio_ops); + mac_prep(&p->mac, adapter, j); + ++j; + + /* + * The VPD EEPROM stores the base Ethernet address for the + * card. A port's address is derived from the base by adding + * the port's index to the base's low octet. + */ + memcpy(hw_addr, adapter->params.vpd.eth_base, 5); + hw_addr[5] = adapter->params.vpd.eth_base[5] + i; + + memcpy(adapter->port[i]->dev_addr, hw_addr, + ETH_ALEN); + memcpy(adapter->port[i]->perm_addr, hw_addr, + ETH_ALEN); + init_link_config(&p->link_config, p->port_type->caps); + p->phy.ops->power_down(&p->phy, 1); + if (!(p->port_type->caps & SUPPORTED_IRQ)) + adapter->params.linkpoll_period = 10; + } + + return 0; +} + +void t3_led_ready(struct adapter *adapter) +{ + t3_set_reg_field(adapter, A_T3DBG_GPIO_EN, F_GPIO0_OUT_VAL, + F_GPIO0_OUT_VAL); +} diff --git a/drivers/net/cxgb3/t3cdev.h b/drivers/net/cxgb3/t3cdev.h new file mode 100644 index 00000000000..359584e7d58 --- /dev/null +++ b/drivers/net/cxgb3/t3cdev.h @@ -0,0 +1,72 @@ +/* + * Copyright (C) 2003-2006 Chelsio Communications. All rights reserved. + * + * This software is available to you under a choice of one of two + * licenses. You may choose to be licensed under the terms of the GNU + * General Public License (GPL) Version 2, available from the file + * COPYING in the main directory of this source tree, or the + * OpenIB.org BSD license below: + * + * Redistribution and use in source and binary forms, with or + * without modification, are permitted provided that the following + * conditions are met: + * + * - Redistributions of source code must retain the above + * copyright notice, this list of conditions and the following + * disclaimer. + * + * - Redistributions in binary form must reproduce the above + * copyright notice, this list of conditions and the following + * disclaimer in the documentation and/or other materials + * provided with the distribution. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + */ +#ifndef _T3CDEV_H_ +#define _T3CDEV_H_ + +#include <linux/list.h> +#include <asm/atomic.h> +#include <asm/semaphore.h> +#include <linux/netdevice.h> +#include <linux/proc_fs.h> +#include <linux/skbuff.h> +#include <net/neighbour.h> + +#define T3CNAMSIZ 16 + +/* Get the t3cdev associated with a net_device */ +#define T3CDEV(netdev) (struct t3cdev *)(netdev->priv) + +struct cxgb3_client; + +enum t3ctype { + T3A = 0, + T3B +}; + +struct t3cdev { + char name[T3CNAMSIZ]; /* T3C device name */ + enum t3ctype type; + struct list_head ofld_dev_list; /* for list linking */ + struct net_device *lldev; /* LL dev associated with T3C messages */ + struct proc_dir_entry *proc_dir; /* root of proc dir for this T3C */ + int (*send)(struct t3cdev *dev, struct sk_buff *skb); + int (*recv)(struct t3cdev *dev, struct sk_buff **skb, int n); + int (*ctl)(struct t3cdev *dev, unsigned int req, void *data); + void (*neigh_update)(struct t3cdev *dev, struct neighbour *neigh); + void *priv; /* driver private data */ + void *l2opt; /* optional layer 2 data */ + void *l3opt; /* optional layer 3 data */ + void *l4opt; /* optional layer 4 data */ + void *ulp; /* ulp stuff */ +}; + +#endif /* _T3CDEV_H_ */ diff --git a/drivers/net/cxgb3/version.h b/drivers/net/cxgb3/version.h new file mode 100644 index 00000000000..1413ea37f41 --- /dev/null +++ b/drivers/net/cxgb3/version.h @@ -0,0 +1,24 @@ +/***************************************************************************** + * * + * File: * + * version.h * + * * + * Description: * + * Chelsio driver version defines. * + * * + * Copyright (c) 2003 - 2006 Chelsio Communications, Inc. * + * All rights reserved. * + * * + * Maintainers: maintainers@chelsio.com * + * * + * http://www.chelsio.com * + * * + ****************************************************************************/ +/* $Date: 2006/10/31 18:57:51 $ $RCSfile: version.h,v $ $Revision: 1.3 $ */ +#ifndef __CHELSIO_VERSION_H +#define __CHELSIO_VERSION_H +#define DRV_DESC "Chelsio T3 Network Driver" +#define DRV_NAME "cxgb3" +/* Driver version */ +#define DRV_VERSION "1.0" +#endif /* __CHELSIO_VERSION_H */ diff --git a/drivers/net/cxgb3/vsc8211.c b/drivers/net/cxgb3/vsc8211.c new file mode 100644 index 00000000000..6a0a815b89c --- /dev/null +++ b/drivers/net/cxgb3/vsc8211.c @@ -0,0 +1,208 @@ +/* + * This file is part of the Chelsio T3 Ethernet driver. + * + * Copyright (C) 2005-2006 Chelsio Communications. All rights reserved. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the LICENSE file included in this + * release for licensing terms and conditions. + */ + +#include "common.h" + +/* VSC8211 PHY specific registers. */ +enum { + VSC8211_INTR_ENABLE = 25, + VSC8211_INTR_STATUS = 26, + VSC8211_AUX_CTRL_STAT = 28, +}; + +enum { + VSC_INTR_RX_ERR = 1 << 0, + VSC_INTR_MS_ERR = 1 << 1, /* master/slave resolution error */ + VSC_INTR_CABLE = 1 << 2, /* cable impairment */ + VSC_INTR_FALSE_CARR = 1 << 3, /* false carrier */ + VSC_INTR_MEDIA_CHG = 1 << 4, /* AMS media change */ + VSC_INTR_RX_FIFO = 1 << 5, /* Rx FIFO over/underflow */ + VSC_INTR_TX_FIFO = 1 << 6, /* Tx FIFO over/underflow */ + VSC_INTR_DESCRAMBL = 1 << 7, /* descrambler lock-lost */ + VSC_INTR_SYMBOL_ERR = 1 << 8, /* symbol error */ + VSC_INTR_NEG_DONE = 1 << 10, /* autoneg done */ + VSC_INTR_NEG_ERR = 1 << 11, /* autoneg error */ + VSC_INTR_LINK_CHG = 1 << 13, /* link change */ + VSC_INTR_ENABLE = 1 << 15, /* interrupt enable */ +}; + +#define CFG_CHG_INTR_MASK (VSC_INTR_LINK_CHG | VSC_INTR_NEG_ERR | \ + VSC_INTR_NEG_DONE) +#define INTR_MASK (CFG_CHG_INTR_MASK | VSC_INTR_TX_FIFO | VSC_INTR_RX_FIFO | \ + VSC_INTR_ENABLE) + +/* PHY specific auxiliary control & status register fields */ +#define S_ACSR_ACTIPHY_TMR 0 +#define M_ACSR_ACTIPHY_TMR 0x3 +#define V_ACSR_ACTIPHY_TMR(x) ((x) << S_ACSR_ACTIPHY_TMR) + +#define S_ACSR_SPEED 3 +#define M_ACSR_SPEED 0x3 +#define G_ACSR_SPEED(x) (((x) >> S_ACSR_SPEED) & M_ACSR_SPEED) + +#define S_ACSR_DUPLEX 5 +#define F_ACSR_DUPLEX (1 << S_ACSR_DUPLEX) + +#define S_ACSR_ACTIPHY 6 +#define F_ACSR_ACTIPHY (1 << S_ACSR_ACTIPHY) + +/* + * Reset the PHY. This PHY completes reset immediately so we never wait. + */ +static int vsc8211_reset(struct cphy *cphy, int wait) +{ + return t3_phy_reset(cphy, 0, 0); +} + +static int vsc8211_intr_enable(struct cphy *cphy) +{ + return mdio_write(cphy, 0, VSC8211_INTR_ENABLE, INTR_MASK); +} + +static int vsc8211_intr_disable(struct cphy *cphy) +{ + return mdio_write(cphy, 0, VSC8211_INTR_ENABLE, 0); +} + +static int vsc8211_intr_clear(struct cphy *cphy) +{ + u32 val; + + /* Clear PHY interrupts by reading the register. */ + return mdio_read(cphy, 0, VSC8211_INTR_STATUS, &val); +} + +static int vsc8211_autoneg_enable(struct cphy *cphy) +{ + return t3_mdio_change_bits(cphy, 0, MII_BMCR, BMCR_PDOWN | BMCR_ISOLATE, + BMCR_ANENABLE | BMCR_ANRESTART); +} + +static int vsc8211_autoneg_restart(struct cphy *cphy) +{ + return t3_mdio_change_bits(cphy, 0, MII_BMCR, BMCR_PDOWN | BMCR_ISOLATE, + BMCR_ANRESTART); +} + +static int vsc8211_get_link_status(struct cphy *cphy, int *link_ok, + int *speed, int *duplex, int *fc) +{ + unsigned int bmcr, status, lpa, adv; + int err, sp = -1, dplx = -1, pause = 0; + + err = mdio_read(cphy, 0, MII_BMCR, &bmcr); + if (!err) + err = mdio_read(cphy, 0, MII_BMSR, &status); + if (err) + return err; + + if (link_ok) { + /* + * BMSR_LSTATUS is latch-low, so if it is 0 we need to read it + * once more to get the current link state. + */ + if (!(status & BMSR_LSTATUS)) + err = mdio_read(cphy, 0, MII_BMSR, &status); + if (err) + return err; + *link_ok = (status & BMSR_LSTATUS) != 0; + } + if (!(bmcr & BMCR_ANENABLE)) { + dplx = (bmcr & BMCR_FULLDPLX) ? DUPLEX_FULL : DUPLEX_HALF; + if (bmcr & BMCR_SPEED1000) + sp = SPEED_1000; + else if (bmcr & BMCR_SPEED100) + sp = SPEED_100; + else + sp = SPEED_10; + } else if (status & BMSR_ANEGCOMPLETE) { + err = mdio_read(cphy, 0, VSC8211_AUX_CTRL_STAT, &status); + if (err) + return err; + + dplx = (status & F_ACSR_DUPLEX) ? DUPLEX_FULL : DUPLEX_HALF; + sp = G_ACSR_SPEED(status); + if (sp == 0) + sp = SPEED_10; + else if (sp == 1) + sp = SPEED_100; + else + sp = SPEED_1000; + + if (fc && dplx == DUPLEX_FULL) { + err = mdio_read(cphy, 0, MII_LPA, &lpa); + if (!err) + err = mdio_read(cphy, 0, MII_ADVERTISE, &adv); + if (err) + return err; + + if (lpa & adv & ADVERTISE_PAUSE_CAP) + pause = PAUSE_RX | PAUSE_TX; + else if ((lpa & ADVERTISE_PAUSE_CAP) && + (lpa & ADVERTISE_PAUSE_ASYM) && + (adv & ADVERTISE_PAUSE_ASYM)) + pause = PAUSE_TX; + else if ((lpa & ADVERTISE_PAUSE_ASYM) && + (adv & ADVERTISE_PAUSE_CAP)) + pause = PAUSE_RX; + } + } + if (speed) + *speed = sp; + if (duplex) + *duplex = dplx; + if (fc) + *fc = pause; + return 0; +} + +static int vsc8211_power_down(struct cphy *cphy, int enable) +{ + return t3_mdio_change_bits(cphy, 0, MII_BMCR, BMCR_PDOWN, + enable ? BMCR_PDOWN : 0); +} + +static int vsc8211_intr_handler(struct cphy *cphy) +{ + unsigned int cause; + int err, cphy_cause = 0; + + err = mdio_read(cphy, 0, VSC8211_INTR_STATUS, &cause); + if (err) + return err; + + cause &= INTR_MASK; + if (cause & CFG_CHG_INTR_MASK) + cphy_cause |= cphy_cause_link_change; + if (cause & (VSC_INTR_RX_FIFO | VSC_INTR_TX_FIFO)) + cphy_cause |= cphy_cause_fifo_error; + return cphy_cause; +} + +static struct cphy_ops vsc8211_ops = { + .reset = vsc8211_reset, + .intr_enable = vsc8211_intr_enable, + .intr_disable = vsc8211_intr_disable, + .intr_clear = vsc8211_intr_clear, + .intr_handler = vsc8211_intr_handler, + .autoneg_enable = vsc8211_autoneg_enable, + .autoneg_restart = vsc8211_autoneg_restart, + .advertise = t3_phy_advertise, + .set_speed_duplex = t3_set_phy_speed_duplex, + .get_link_status = vsc8211_get_link_status, + .power_down = vsc8211_power_down, +}; + +void t3_vsc8211_phy_prep(struct cphy *phy, struct adapter *adapter, + int phy_addr, const struct mdio_ops *mdio_ops) +{ + cphy_init(phy, adapter, phy_addr, &vsc8211_ops, mdio_ops); +} diff --git a/drivers/net/cxgb3/xgmac.c b/drivers/net/cxgb3/xgmac.c new file mode 100644 index 00000000000..0f209c77692 --- /dev/null +++ b/drivers/net/cxgb3/xgmac.c @@ -0,0 +1,389 @@ +/* + * This file is part of the Chelsio T3 Ethernet driver. + * + * Copyright (C) 2005-2006 Chelsio Communications. All rights reserved. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the LICENSE file included in this + * release for licensing terms and conditions. + */ + +#include "common.h" +#include "regs.h" + +/* + * # of exact address filters. The first one is used for the station address, + * the rest are available for multicast addresses. + */ +#define EXACT_ADDR_FILTERS 8 + +static inline int macidx(const struct cmac *mac) +{ + return mac->offset / (XGMAC0_1_BASE_ADDR - XGMAC0_0_BASE_ADDR); +} + +static void xaui_serdes_reset(struct cmac *mac) +{ + static const unsigned int clear[] = { + F_PWRDN0 | F_PWRDN1, F_RESETPLL01, F_RESET0 | F_RESET1, + F_PWRDN2 | F_PWRDN3, F_RESETPLL23, F_RESET2 | F_RESET3 + }; + + int i; + struct adapter *adap = mac->adapter; + u32 ctrl = A_XGM_SERDES_CTRL0 + mac->offset; + + t3_write_reg(adap, ctrl, adap->params.vpd.xauicfg[macidx(mac)] | + F_RESET3 | F_RESET2 | F_RESET1 | F_RESET0 | + F_PWRDN3 | F_PWRDN2 | F_PWRDN1 | F_PWRDN0 | + F_RESETPLL23 | F_RESETPLL01); + t3_read_reg(adap, ctrl); + udelay(15); + + for (i = 0; i < ARRAY_SIZE(clear); i++) { + t3_set_reg_field(adap, ctrl, clear[i], 0); + udelay(15); + } +} + +void t3b_pcs_reset(struct cmac *mac) +{ + t3_set_reg_field(mac->adapter, A_XGM_RESET_CTRL + mac->offset, + F_PCS_RESET_, 0); + udelay(20); + t3_set_reg_field(mac->adapter, A_XGM_RESET_CTRL + mac->offset, 0, + F_PCS_RESET_); +} + +int t3_mac_reset(struct cmac *mac) +{ + static const struct addr_val_pair mac_reset_avp[] = { + {A_XGM_TX_CTRL, 0}, + {A_XGM_RX_CTRL, 0}, + {A_XGM_RX_CFG, F_DISPAUSEFRAMES | F_EN1536BFRAMES | + F_RMFCS | F_ENJUMBO | F_ENHASHMCAST}, + {A_XGM_RX_HASH_LOW, 0}, + {A_XGM_RX_HASH_HIGH, 0}, + {A_XGM_RX_EXACT_MATCH_LOW_1, 0}, + {A_XGM_RX_EXACT_MATCH_LOW_2, 0}, + {A_XGM_RX_EXACT_MATCH_LOW_3, 0}, + {A_XGM_RX_EXACT_MATCH_LOW_4, 0}, + {A_XGM_RX_EXACT_MATCH_LOW_5, 0}, + {A_XGM_RX_EXACT_MATCH_LOW_6, 0}, + {A_XGM_RX_EXACT_MATCH_LOW_7, 0}, + {A_XGM_RX_EXACT_MATCH_LOW_8, 0}, + {A_XGM_STAT_CTRL, F_CLRSTATS} + }; + u32 val; + struct adapter *adap = mac->adapter; + unsigned int oft = mac->offset; + + t3_write_reg(adap, A_XGM_RESET_CTRL + oft, F_MAC_RESET_); + t3_read_reg(adap, A_XGM_RESET_CTRL + oft); /* flush */ + + t3_write_regs(adap, mac_reset_avp, ARRAY_SIZE(mac_reset_avp), oft); + t3_set_reg_field(adap, A_XGM_RXFIFO_CFG + oft, + F_RXSTRFRWRD | F_DISERRFRAMES, + uses_xaui(adap) ? 0 : F_RXSTRFRWRD); + + if (uses_xaui(adap)) { + if (adap->params.rev == 0) { + t3_set_reg_field(adap, A_XGM_SERDES_CTRL + oft, 0, + F_RXENABLE | F_TXENABLE); + if (t3_wait_op_done(adap, A_XGM_SERDES_STATUS1 + oft, + F_CMULOCK, 1, 5, 2)) { + CH_ERR(adap, + "MAC %d XAUI SERDES CMU lock failed\n", + macidx(mac)); + return -1; + } + t3_set_reg_field(adap, A_XGM_SERDES_CTRL + oft, 0, + F_SERDESRESET_); + } else + xaui_serdes_reset(mac); + } + + if (adap->params.rev > 0) + t3_write_reg(adap, A_XGM_PAUSE_TIMER + oft, 0xf000); + + val = F_MAC_RESET_; + if (is_10G(adap)) + val |= F_PCS_RESET_; + else if (uses_xaui(adap)) + val |= F_PCS_RESET_ | F_XG2G_RESET_; + else + val |= F_RGMII_RESET_ | F_XG2G_RESET_; + t3_write_reg(adap, A_XGM_RESET_CTRL + oft, val); + t3_read_reg(adap, A_XGM_RESET_CTRL + oft); /* flush */ + if ((val & F_PCS_RESET_) && adap->params.rev) { + msleep(1); + t3b_pcs_reset(mac); + } + + memset(&mac->stats, 0, sizeof(mac->stats)); + return 0; +} + +/* + * Set the exact match register 'idx' to recognize the given Ethernet address. + */ +static void set_addr_filter(struct cmac *mac, int idx, const u8 * addr) +{ + u32 addr_lo, addr_hi; + unsigned int oft = mac->offset + idx * 8; + + addr_lo = (addr[3] << 24) | (addr[2] << 16) | (addr[1] << 8) | addr[0]; + addr_hi = (addr[5] << 8) | addr[4]; + + t3_write_reg(mac->adapter, A_XGM_RX_EXACT_MATCH_LOW_1 + oft, addr_lo); + t3_write_reg(mac->adapter, A_XGM_RX_EXACT_MATCH_HIGH_1 + oft, addr_hi); +} + +/* Set one of the station's unicast MAC addresses. */ +int t3_mac_set_address(struct cmac *mac, unsigned int idx, u8 addr[6]) +{ + if (idx >= mac->nucast) + return -EINVAL; + set_addr_filter(mac, idx, addr); + return 0; +} + +/* + * Specify the number of exact address filters that should be reserved for + * unicast addresses. Caller should reload the unicast and multicast addresses + * after calling this. + */ +int t3_mac_set_num_ucast(struct cmac *mac, int n) +{ + if (n > EXACT_ADDR_FILTERS) + return -EINVAL; + mac->nucast = n; + return 0; +} + +/* Calculate the RX hash filter index of an Ethernet address */ +static int hash_hw_addr(const u8 * addr) +{ + int hash = 0, octet, bit, i = 0, c; + + for (octet = 0; octet < 6; ++octet) + for (c = addr[octet], bit = 0; bit < 8; c >>= 1, ++bit) { + hash ^= (c & 1) << i; + if (++i == 6) + i = 0; + } + return hash; +} + +int t3_mac_set_rx_mode(struct cmac *mac, struct t3_rx_mode *rm) +{ + u32 val, hash_lo, hash_hi; + struct adapter *adap = mac->adapter; + unsigned int oft = mac->offset; + + val = t3_read_reg(adap, A_XGM_RX_CFG + oft) & ~F_COPYALLFRAMES; + if (rm->dev->flags & IFF_PROMISC) + val |= F_COPYALLFRAMES; + t3_write_reg(adap, A_XGM_RX_CFG + oft, val); + + if (rm->dev->flags & IFF_ALLMULTI) + hash_lo = hash_hi = 0xffffffff; + else { + u8 *addr; + int exact_addr_idx = mac->nucast; + + hash_lo = hash_hi = 0; + while ((addr = t3_get_next_mcaddr(rm))) + if (exact_addr_idx < EXACT_ADDR_FILTERS) + set_addr_filter(mac, exact_addr_idx++, addr); + else { + int hash = hash_hw_addr(addr); + + if (hash < 32) + hash_lo |= (1 << hash); + else + hash_hi |= (1 << (hash - 32)); + } + } + + t3_write_reg(adap, A_XGM_RX_HASH_LOW + oft, hash_lo); + t3_write_reg(adap, A_XGM_RX_HASH_HIGH + oft, hash_hi); + return 0; +} + +int t3_mac_set_mtu(struct cmac *mac, unsigned int mtu) +{ + int hwm, lwm; + unsigned int thres, v; + struct adapter *adap = mac->adapter; + + /* + * MAX_FRAME_SIZE inludes header + FCS, mtu doesn't. The HW max + * packet size register includes header, but not FCS. + */ + mtu += 14; + if (mtu > MAX_FRAME_SIZE - 4) + return -EINVAL; + t3_write_reg(adap, A_XGM_RX_MAX_PKT_SIZE + mac->offset, mtu); + + /* + * Adjust the PAUSE frame watermarks. We always set the LWM, and the + * HWM only if flow-control is enabled. + */ + hwm = max(MAC_RXFIFO_SIZE - 3 * mtu, MAC_RXFIFO_SIZE / 2U); + hwm = min(hwm, 3 * MAC_RXFIFO_SIZE / 4 + 1024); + lwm = hwm - 1024; + v = t3_read_reg(adap, A_XGM_RXFIFO_CFG + mac->offset); + v &= ~V_RXFIFOPAUSELWM(M_RXFIFOPAUSELWM); + v |= V_RXFIFOPAUSELWM(lwm / 8); + if (G_RXFIFOPAUSEHWM(v)) + v = (v & ~V_RXFIFOPAUSEHWM(M_RXFIFOPAUSEHWM)) | + V_RXFIFOPAUSEHWM(hwm / 8); + t3_write_reg(adap, A_XGM_RXFIFO_CFG + mac->offset, v); + + /* Adjust the TX FIFO threshold based on the MTU */ + thres = (adap->params.vpd.cclk * 1000) / 15625; + thres = (thres * mtu) / 1000; + if (is_10G(adap)) + thres /= 10; + thres = mtu > thres ? (mtu - thres + 7) / 8 : 0; + thres = max(thres, 8U); /* need at least 8 */ + t3_set_reg_field(adap, A_XGM_TXFIFO_CFG + mac->offset, + V_TXFIFOTHRESH(M_TXFIFOTHRESH), V_TXFIFOTHRESH(thres)); + return 0; +} + +int t3_mac_set_speed_duplex_fc(struct cmac *mac, int speed, int duplex, int fc) +{ + u32 val; + struct adapter *adap = mac->adapter; + unsigned int oft = mac->offset; + + if (duplex >= 0 && duplex != DUPLEX_FULL) + return -EINVAL; + if (speed >= 0) { + if (speed == SPEED_10) + val = V_PORTSPEED(0); + else if (speed == SPEED_100) + val = V_PORTSPEED(1); + else if (speed == SPEED_1000) + val = V_PORTSPEED(2); + else if (speed == SPEED_10000) + val = V_PORTSPEED(3); + else + return -EINVAL; + + t3_set_reg_field(adap, A_XGM_PORT_CFG + oft, + V_PORTSPEED(M_PORTSPEED), val); + } + + val = t3_read_reg(adap, A_XGM_RXFIFO_CFG + oft); + val &= ~V_RXFIFOPAUSEHWM(M_RXFIFOPAUSEHWM); + if (fc & PAUSE_TX) + val |= V_RXFIFOPAUSEHWM(G_RXFIFOPAUSELWM(val) + 128); /* +1KB */ + t3_write_reg(adap, A_XGM_RXFIFO_CFG + oft, val); + + t3_set_reg_field(adap, A_XGM_TX_CFG + oft, F_TXPAUSEEN, + (fc & PAUSE_RX) ? F_TXPAUSEEN : 0); + return 0; +} + +int t3_mac_enable(struct cmac *mac, int which) +{ + int idx = macidx(mac); + struct adapter *adap = mac->adapter; + unsigned int oft = mac->offset; + + if (which & MAC_DIRECTION_TX) { + t3_write_reg(adap, A_XGM_TX_CTRL + oft, F_TXEN); + t3_write_reg(adap, A_TP_PIO_ADDR, A_TP_TX_DROP_CFG_CH0 + idx); + t3_write_reg(adap, A_TP_PIO_DATA, 0xbf000001); + t3_write_reg(adap, A_TP_PIO_ADDR, A_TP_TX_DROP_MODE); + t3_set_reg_field(adap, A_TP_PIO_DATA, 1 << idx, 1 << idx); + } + if (which & MAC_DIRECTION_RX) + t3_write_reg(adap, A_XGM_RX_CTRL + oft, F_RXEN); + return 0; +} + +int t3_mac_disable(struct cmac *mac, int which) +{ + int idx = macidx(mac); + struct adapter *adap = mac->adapter; + + if (which & MAC_DIRECTION_TX) { + t3_write_reg(adap, A_XGM_TX_CTRL + mac->offset, 0); + t3_write_reg(adap, A_TP_PIO_ADDR, A_TP_TX_DROP_CFG_CH0 + idx); + t3_write_reg(adap, A_TP_PIO_DATA, 0xc000001f); + t3_write_reg(adap, A_TP_PIO_ADDR, A_TP_TX_DROP_MODE); + t3_set_reg_field(adap, A_TP_PIO_DATA, 1 << idx, 0); + } + if (which & MAC_DIRECTION_RX) + t3_write_reg(adap, A_XGM_RX_CTRL + mac->offset, 0); + return 0; +} + +/* + * This function is called periodically to accumulate the current values of the + * RMON counters into the port statistics. Since the packet counters are only + * 32 bits they can overflow in ~286 secs at 10G, so the function should be + * called more frequently than that. The byte counters are 45-bit wide, they + * would overflow in ~7.8 hours. + */ +const struct mac_stats *t3_mac_update_stats(struct cmac *mac) +{ +#define RMON_READ(mac, addr) t3_read_reg(mac->adapter, addr + mac->offset) +#define RMON_UPDATE(mac, name, reg) \ + (mac)->stats.name += (u64)RMON_READ(mac, A_XGM_STAT_##reg) +#define RMON_UPDATE64(mac, name, reg_lo, reg_hi) \ + (mac)->stats.name += RMON_READ(mac, A_XGM_STAT_##reg_lo) + \ + ((u64)RMON_READ(mac, A_XGM_STAT_##reg_hi) << 32) + + u32 v, lo; + + RMON_UPDATE64(mac, rx_octets, RX_BYTES_LOW, RX_BYTES_HIGH); + RMON_UPDATE64(mac, rx_frames, RX_FRAMES_LOW, RX_FRAMES_HIGH); + RMON_UPDATE(mac, rx_mcast_frames, RX_MCAST_FRAMES); + RMON_UPDATE(mac, rx_bcast_frames, RX_BCAST_FRAMES); + RMON_UPDATE(mac, rx_fcs_errs, RX_CRC_ERR_FRAMES); + RMON_UPDATE(mac, rx_pause, RX_PAUSE_FRAMES); + RMON_UPDATE(mac, rx_jabber, RX_JABBER_FRAMES); + RMON_UPDATE(mac, rx_short, RX_SHORT_FRAMES); + RMON_UPDATE(mac, rx_symbol_errs, RX_SYM_CODE_ERR_FRAMES); + + RMON_UPDATE(mac, rx_too_long, RX_OVERSIZE_FRAMES); + mac->stats.rx_too_long += RMON_READ(mac, A_XGM_RX_MAX_PKT_SIZE_ERR_CNT); + + RMON_UPDATE(mac, rx_frames_64, RX_64B_FRAMES); + RMON_UPDATE(mac, rx_frames_65_127, RX_65_127B_FRAMES); + RMON_UPDATE(mac, rx_frames_128_255, RX_128_255B_FRAMES); + RMON_UPDATE(mac, rx_frames_256_511, RX_256_511B_FRAMES); + RMON_UPDATE(mac, rx_frames_512_1023, RX_512_1023B_FRAMES); + RMON_UPDATE(mac, rx_frames_1024_1518, RX_1024_1518B_FRAMES); + RMON_UPDATE(mac, rx_frames_1519_max, RX_1519_MAXB_FRAMES); + + RMON_UPDATE64(mac, tx_octets, TX_BYTE_LOW, TX_BYTE_HIGH); + RMON_UPDATE64(mac, tx_frames, TX_FRAME_LOW, TX_FRAME_HIGH); + RMON_UPDATE(mac, tx_mcast_frames, TX_MCAST); + RMON_UPDATE(mac, tx_bcast_frames, TX_BCAST); + RMON_UPDATE(mac, tx_pause, TX_PAUSE); + /* This counts error frames in general (bad FCS, underrun, etc). */ + RMON_UPDATE(mac, tx_underrun, TX_ERR_FRAMES); + + RMON_UPDATE(mac, tx_frames_64, TX_64B_FRAMES); + RMON_UPDATE(mac, tx_frames_65_127, TX_65_127B_FRAMES); + RMON_UPDATE(mac, tx_frames_128_255, TX_128_255B_FRAMES); + RMON_UPDATE(mac, tx_frames_256_511, TX_256_511B_FRAMES); + RMON_UPDATE(mac, tx_frames_512_1023, TX_512_1023B_FRAMES); + RMON_UPDATE(mac, tx_frames_1024_1518, TX_1024_1518B_FRAMES); + RMON_UPDATE(mac, tx_frames_1519_max, TX_1519_MAXB_FRAMES); + + /* The next stat isn't clear-on-read. */ + t3_write_reg(mac->adapter, A_TP_MIB_INDEX, mac->offset ? 51 : 50); + v = t3_read_reg(mac->adapter, A_TP_MIB_RDATA); + lo = (u32) mac->stats.rx_cong_drops; + mac->stats.rx_cong_drops += (u64) (v - lo); + + return &mac->stats; +} |