aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
Diffstat
-rw-r--r--drivers/video/aty/aty128fb.c25
-rw-r--r--drivers/video/aty/atyfb_base.c20
-rw-r--r--drivers/video/aty/radeon_pm.c85
-rw-r--r--drivers/video/aty/radeonfb.h2
4 files changed, 50 insertions, 82 deletions
diff --git a/drivers/video/aty/aty128fb.c b/drivers/video/aty/aty128fb.c
index fb2b0f5b23b..e6e299feb51 100644
--- a/drivers/video/aty/aty128fb.c
+++ b/drivers/video/aty/aty128fb.c
@@ -2374,6 +2374,8 @@ static void aty128_set_suspend(struct aty128fb_par *par, int suspend)
/* Set the chip into the appropriate suspend mode (we use D2,
* D3 would require a complete re-initialisation of the chip,
* including PCI config registers, clocks, AGP configuration, ...)
+ *
+ * For resume, the core will have already brought us back to D0
*/
if (suspend) {
/* Make sure CRTC2 is reset. Remove that the day we decide to
@@ -2391,17 +2393,9 @@ static void aty128_set_suspend(struct aty128fb_par *par, int suspend)
aty_st_le32(BUS_CNTL1, 0x00000010);
aty_st_le32(MEM_POWER_MISC, 0x0c830000);
mdelay(100);
- pci_read_config_word(pdev, par->pm_reg+PCI_PM_CTRL, &pwr_command);
+
/* Switch PCI power management to D2 */
- pci_write_config_word(pdev, par->pm_reg+PCI_PM_CTRL,
- (pwr_command & ~PCI_PM_CTRL_STATE_MASK) | 2);
- pci_read_config_word(pdev, par->pm_reg+PCI_PM_CTRL, &pwr_command);
- } else {
- /* Switch back PCI power management to D0 */
- mdelay(100);
- pci_write_config_word(pdev, par->pm_reg+PCI_PM_CTRL, 0);
- pci_read_config_word(pdev, par->pm_reg+PCI_PM_CTRL, &pwr_command);
- mdelay(100);
+ pci_set_power_state(pdev, PCI_D2);
}
}
@@ -2410,6 +2404,12 @@ static int aty128_pci_suspend(struct pci_dev *pdev, pm_message_t state)
struct fb_info *info = pci_get_drvdata(pdev);
struct aty128fb_par *par = info->par;
+ /* Because we may change PCI D state ourselves, we need to
+ * first save the config space content so the core can
+ * restore it properly on resume.
+ */
+ pci_save_state(pdev);
+
/* We don't do anything but D2, for now we return 0, but
* we may want to change that. How do we know if the BIOS
* can properly take care of D3 ? Also, with swsusp, we
@@ -2476,6 +2476,11 @@ static int aty128_do_resume(struct pci_dev *pdev)
if (pdev->dev.power.power_state.event == PM_EVENT_ON)
return 0;
+ /* PCI state will have been restored by the core, so
+ * we should be in D0 now with our config space fully
+ * restored
+ */
+
/* Wakeup chip */
aty128_set_suspend(par, 0);
par->asleep = 0;
diff --git a/drivers/video/aty/atyfb_base.c b/drivers/video/aty/atyfb_base.c
index 1d6e16d346a..1207c208a30 100644
--- a/drivers/video/aty/atyfb_base.c
+++ b/drivers/video/aty/atyfb_base.c
@@ -1978,7 +1978,7 @@ static int aty_power_mgmt(int sleep, struct atyfb_par *par)
return timeout ? 0 : -EIO;
}
-#endif
+#endif /* CONFIG_PPC_PMAC */
static int atyfb_pci_suspend(struct pci_dev *pdev, pm_message_t state)
{
@@ -2002,9 +2002,15 @@ static int atyfb_pci_suspend(struct pci_dev *pdev, pm_message_t state)
par->asleep = 1;
par->lock_blank = 1;
+ /* Because we may change PCI D state ourselves, we need to
+ * first save the config space content so the core can
+ * restore it properly on resume.
+ */
+ pci_save_state(pdev);
+
#ifdef CONFIG_PPC_PMAC
/* Set chip to "suspend" mode */
- if (aty_power_mgmt(1, par)) {
+ if (machine_is(powermac) && aty_power_mgmt(1, par)) {
par->asleep = 0;
par->lock_blank = 0;
atyfb_blank(FB_BLANK_UNBLANK, info);
@@ -2047,11 +2053,15 @@ static int atyfb_pci_resume(struct pci_dev *pdev)
acquire_console_sem();
+ /* PCI state will have been restored by the core, so
+ * we should be in D0 now with our config space fully
+ * restored
+ */
+
#ifdef CONFIG_PPC_PMAC
- if (pdev->dev.power.power_state.event == 2)
+ if (machine_is(powermac) &&
+ pdev->dev.power.power_state.event == PM_EVENT_SUSPEND)
aty_power_mgmt(0, par);
-#else
- pci_set_power_state(pdev, PCI_D0);
#endif
aty_resume_chip(info);
diff --git a/drivers/video/aty/radeon_pm.c b/drivers/video/aty/radeon_pm.c
index c4ac2a032fc..ca5f0dc2854 100644
--- a/drivers/video/aty/radeon_pm.c
+++ b/drivers/video/aty/radeon_pm.c
@@ -2509,9 +2509,7 @@ static void radeon_reinitialize_QW(struct radeonfb_info *rinfo)
static void radeon_set_suspend(struct radeonfb_info *rinfo, int suspend)
{
- u16 pwr_cmd;
u32 tmp;
- int i;
if (!rinfo->pm_reg)
return;
@@ -2557,32 +2555,14 @@ static void radeon_set_suspend(struct radeonfb_info *rinfo, int suspend)
}
}
- for (i = 0; i < 64; ++i)
- pci_read_config_dword(rinfo->pdev, i * 4,
- &rinfo->cfg_save[i]);
-
/* Switch PCI power management to D2. */
pci_disable_device(rinfo->pdev);
- for (;;) {
- pci_read_config_word(
- rinfo->pdev, rinfo->pm_reg+PCI_PM_CTRL,
- &pwr_cmd);
- if (pwr_cmd & 2)
- break;
- pci_write_config_word(
- rinfo->pdev, rinfo->pm_reg+PCI_PM_CTRL,
- (pwr_cmd & ~PCI_PM_CTRL_STATE_MASK) | 2);
- mdelay(500);
- }
+ pci_save_state(rinfo->pdev);
+ pci_set_power_state(rinfo->pdev, PCI_D2);
} else {
printk(KERN_DEBUG "radeonfb (%s): switching to D0 state...\n",
pci_name(rinfo->pdev));
- /* Switch back PCI powermanagment to D0 */
- mdelay(200);
- pci_write_config_word(rinfo->pdev, rinfo->pm_reg+PCI_PM_CTRL, 0);
- mdelay(500);
-
if (rinfo->family <= CHIP_FAMILY_RV250) {
/* Reset the SDRAM controller */
radeon_pm_full_reset_sdram(rinfo);
@@ -2598,37 +2578,10 @@ static void radeon_set_suspend(struct radeonfb_info *rinfo, int suspend)
}
}
-static int radeon_restore_pci_cfg(struct radeonfb_info *rinfo)
-{
- int i;
- static u32 radeon_cfg_after_resume[64];
-
- for (i = 0; i < 64; ++i)
- pci_read_config_dword(rinfo->pdev, i * 4,
- &radeon_cfg_after_resume[i]);
-
- if (radeon_cfg_after_resume[PCI_BASE_ADDRESS_0/4]
- == rinfo->cfg_save[PCI_BASE_ADDRESS_0/4])
- return 0; /* assume everything is ok */
-
- for (i = PCI_BASE_ADDRESS_0/4; i < 64; ++i) {
- if (radeon_cfg_after_resume[i] != rinfo->cfg_save[i])
- pci_write_config_dword(rinfo->pdev, i * 4,
- rinfo->cfg_save[i]);
- }
- pci_write_config_word(rinfo->pdev, PCI_CACHE_LINE_SIZE,
- rinfo->cfg_save[PCI_CACHE_LINE_SIZE/4]);
- pci_write_config_word(rinfo->pdev, PCI_COMMAND,
- rinfo->cfg_save[PCI_COMMAND/4]);
- return 1;
-}
-
-
int radeonfb_pci_suspend(struct pci_dev *pdev, pm_message_t mesg)
{
struct fb_info *info = pci_get_drvdata(pdev);
struct radeonfb_info *rinfo = info->par;
- int i;
if (mesg.event == pdev->dev.power.power_state.event)
return 0;
@@ -2674,6 +2627,11 @@ int radeonfb_pci_suspend(struct pci_dev *pdev, pm_message_t mesg)
pmac_suspend_agp_for_card(pdev);
#endif /* CONFIG_PPC_PMAC */
+ /* It's unclear whether or when the generic code will do that, so let's
+ * do it ourselves. We save state before we do any power management
+ */
+ pci_save_state(pdev);
+
/* If we support wakeup from poweroff, we save all regs we can including cfg
* space
*/
@@ -2698,9 +2656,6 @@ int radeonfb_pci_suspend(struct pci_dev *pdev, pm_message_t mesg)
mdelay(20);
OUTREG(LVDS_GEN_CNTL, INREG(LVDS_GEN_CNTL) & ~(LVDS_DIGON));
}
- // FIXME: Use PCI layer
- for (i = 0; i < 64; ++i)
- pci_read_config_dword(pdev, i * 4, &rinfo->cfg_save[i]);
pci_disable_device(pdev);
}
/* If we support D2, we go to it (should be fixed later with a flag forcing
@@ -2717,6 +2672,13 @@ int radeonfb_pci_suspend(struct pci_dev *pdev, pm_message_t mesg)
return 0;
}
+static int radeon_check_power_loss(struct radeonfb_info *rinfo)
+{
+ return rinfo->save_regs[4] != INPLL(CLK_PIN_CNTL) ||
+ rinfo->save_regs[2] != INPLL(MCLK_CNTL) ||
+ rinfo->save_regs[3] != INPLL(SCLK_CNTL);
+}
+
int radeonfb_pci_resume(struct pci_dev *pdev)
{
struct fb_info *info = pci_get_drvdata(pdev);
@@ -2735,20 +2697,13 @@ int radeonfb_pci_resume(struct pci_dev *pdev)
printk(KERN_DEBUG "radeonfb (%s): resuming from state: %d...\n",
pci_name(pdev), pdev->dev.power.power_state.event);
-
- if (pci_enable_device(pdev)) {
- rc = -ENODEV;
- printk(KERN_ERR "radeonfb (%s): can't enable PCI device !\n",
- pci_name(pdev));
- goto bail;
- }
- pci_set_master(pdev);
-
+ /* PCI state will have been restored by the core, so
+ * we should be in D0 now with our config space fully
+ * restored
+ */
if (pdev->dev.power.power_state.event == PM_EVENT_SUSPEND) {
- /* Wakeup chip. Check from config space if we were powered off
- * (todo: additionally, check CLK_PIN_CNTL too)
- */
- if ((rinfo->pm_mode & radeon_pm_off) && radeon_restore_pci_cfg(rinfo)) {
+ /* Wakeup chip */
+ if ((rinfo->pm_mode & radeon_pm_off) && radeon_check_power_loss(rinfo)) {
if (rinfo->reinit_func != NULL)
rinfo->reinit_func(rinfo);
else {
diff --git a/drivers/video/aty/radeonfb.h b/drivers/video/aty/radeonfb.h
index 3ea1b00fdd2..7351e66c7f5 100644
--- a/drivers/video/aty/radeonfb.h
+++ b/drivers/video/aty/radeonfb.h
@@ -361,8 +361,6 @@ struct radeonfb_info {
#ifdef CONFIG_FB_RADEON_I2C
struct radeon_i2c_chan i2c[4];
#endif
-
- u32 cfg_save[64];
};
generated by cgit v1.2.3-18-g5258 (git 2.32.0) at 2024-11-22 05:39:26 +0000