diff options
31 files changed, 737 insertions, 389 deletions
diff --git a/arch/arm/common/locomo.c b/arch/arm/common/locomo.c index fbc3ab0e101..04de83f4f00 100644 --- a/arch/arm/common/locomo.c +++ b/arch/arm/common/locomo.c @@ -506,7 +506,7 @@ locomo_init_one_child(struct locomo *lchip, struct locomo_dev_info *info) goto out; } - strncpy(dev->dev.bus_id,info->name,sizeof(dev->dev.bus_id)); + strncpy(dev->dev.bus_id, info->name, sizeof(dev->dev.bus_id)); /* * If the parent device has a DMA mask associated with it, * propagate it down to the children. @@ -729,7 +729,6 @@ __locomo_probe(struct device *me, struct resource *mem, int irq) for (i = 0; i < ARRAY_SIZE(locomo_devices); i++) locomo_init_one_child(lchip, &locomo_devices[i]); - return 0; out: diff --git a/arch/arm/common/sharpsl_pm.c b/arch/arm/common/sharpsl_pm.c index 045e37e0733..59b5ddec480 100644 --- a/arch/arm/common/sharpsl_pm.c +++ b/arch/arm/common/sharpsl_pm.c @@ -412,8 +412,10 @@ static int sharpsl_check_battery_temp(void) val = get_select_val(buff); dev_dbg(sharpsl_pm.dev, "Temperature: %d\n", val); - if (val > sharpsl_pm.machinfo->charge_on_temp) + if (val > sharpsl_pm.machinfo->charge_on_temp) { + printk(KERN_WARNING "Not charging: temperature out of limits.\n"); return -1; + } return 0; } diff --git a/arch/arm/configs/ep93xx_defconfig b/arch/arm/configs/ep93xx_defconfig index b69e88bbc90..c0de6fcd488 100644 --- a/arch/arm/configs/ep93xx_defconfig +++ b/arch/arm/configs/ep93xx_defconfig @@ -1,14 +1,18 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.17-rc2 -# Wed Apr 19 21:21:01 2006 +# Linux kernel version: 2.6.18-rc1 +# Sun Jul 9 15:21:30 2006 # CONFIG_ARM=y CONFIG_MMU=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_PROBE=y CONFIG_RWSEM_GENERIC_SPINLOCK=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_VECTORS_BASE=0xffff0000 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # # Code maturity level options @@ -43,14 +47,15 @@ CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y +CONFIG_RT_MUTEXES=y CONFIG_FUTEX=y CONFIG_EPOLL=y CONFIG_SHMEM=y CONFIG_SLAB=y +CONFIG_VM_EVENT_COUNTERS=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 # CONFIG_SLOB is not set -CONFIG_OBSOLETE_INTERMODULE=y # # Loadable module support @@ -83,18 +88,26 @@ CONFIG_DEFAULT_IOSCHED="deadline" # # System Type # +# CONFIG_ARCH_AAEC2000 is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_AT91 is not set # CONFIG_ARCH_CLPS7500 is not set # CONFIG_ARCH_CLPS711X is not set # CONFIG_ARCH_CO285 is not set # CONFIG_ARCH_EBSA110 is not set CONFIG_ARCH_EP93XX=y # CONFIG_ARCH_FOOTBRIDGE is not set -# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_IMX is not set # CONFIG_ARCH_IOP3XX is not set # CONFIG_ARCH_IXP4XX is not set # CONFIG_ARCH_IXP2000 is not set # CONFIG_ARCH_IXP23XX is not set # CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_PNX4008 is not set # CONFIG_ARCH_PXA is not set # CONFIG_ARCH_RPC is not set # CONFIG_ARCH_SA1100 is not set @@ -102,20 +115,18 @@ CONFIG_ARCH_EP93XX=y # CONFIG_ARCH_SHARK is not set # CONFIG_ARCH_LH7A40X is not set # CONFIG_ARCH_OMAP is not set -# CONFIG_ARCH_VERSATILE is not set -# CONFIG_ARCH_REALVIEW is not set -# CONFIG_ARCH_IMX is not set -# CONFIG_ARCH_H720X is not set -# CONFIG_ARCH_AAEC2000 is not set -# CONFIG_ARCH_AT91RM9200 is not set # # Cirrus EP93xx Implementation Options # +CONFIG_CRUNCH=y # # EP93xx Platforms # +CONFIG_MACH_EDB9302=y +CONFIG_MACH_EDB9315=y +CONFIG_MACH_EDB9315A=y CONFIG_MACH_GESBC9312=y CONFIG_MACH_TS72XX=y @@ -166,6 +177,7 @@ CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set CONFIG_SPLIT_PTLOCK_CPUS=4096 +# CONFIG_RESOURCES_64BIT is not set CONFIG_ALIGNMENT_TRAP=y # @@ -233,6 +245,8 @@ CONFIG_SYN_COOKIES=y # CONFIG_INET_IPCOMP is not set # CONFIG_INET_XFRM_TUNNEL is not set # CONFIG_INET_TUNNEL is not set +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set @@ -240,6 +254,7 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_IPV6 is not set # CONFIG_INET6_XFRM_TUNNEL is not set # CONFIG_INET6_TUNNEL is not set +# CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set # @@ -294,6 +309,7 @@ CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_FW_LOADER is not set # CONFIG_DEBUG_DRIVER is not set +# CONFIG_SYS_HYPERVISOR is not set # # Connector - unified userspace <-> kernelspace linker @@ -386,6 +402,8 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=1 # CONFIG_MTD_NAND=y CONFIG_MTD_NAND_VERIFY_WRITE=y +# CONFIG_MTD_NAND_ECC_SMC is not set +CONFIG_MTD_NAND_TS7250=y CONFIG_MTD_NAND_IDS=y # CONFIG_MTD_NAND_DISKONCHIP is not set # CONFIG_MTD_NAND_NANDSIM is not set @@ -582,6 +600,7 @@ CONFIG_EP93XX_WATCHDOG=y # USB-based Watchdog Cards # # CONFIG_USBPCWATCHDOG is not set +# CONFIG_HW_RANDOM is not set # CONFIG_NVRAM is not set # CONFIG_DTLK is not set # CONFIG_R3964 is not set @@ -613,6 +632,7 @@ CONFIG_I2C_ALGOBIT=y # # I2C Hardware Bus support # +# CONFIG_I2C_OCORES is not set # CONFIG_I2C_PARPORT_LIGHT is not set # CONFIG_I2C_STUB is not set # CONFIG_I2C_PCA_ISA is not set @@ -641,13 +661,13 @@ CONFIG_I2C_DEBUG_CHIP=y # # Dallas's 1-wire bus # -# CONFIG_W1 is not set # # Hardware Monitoring support # CONFIG_HWMON=y # CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_ABITUGURU is not set # CONFIG_SENSORS_ADM1021 is not set # CONFIG_SENSORS_ADM1025 is not set # CONFIG_SENSORS_ADM1026 is not set @@ -675,8 +695,10 @@ CONFIG_HWMON=y # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_PC87360 is not set # CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_SMSC47M192 is not set # CONFIG_SENSORS_SMSC47B397 is not set # CONFIG_SENSORS_W83781D is not set +# CONFIG_SENSORS_W83791D is not set # CONFIG_SENSORS_W83792D is not set # CONFIG_SENSORS_W83L785TS is not set # CONFIG_SENSORS_W83627HF is not set @@ -704,6 +726,7 @@ CONFIG_HWMON=y # Multimedia devices # # CONFIG_VIDEO_DEV is not set +CONFIG_VIDEO_V4L2=y # # Digital Video Broadcasting Devices @@ -714,6 +737,7 @@ CONFIG_HWMON=y # # Graphics support # +# CONFIG_FIRMWARE_EDID is not set # CONFIG_FB is not set # @@ -806,6 +830,7 @@ CONFIG_USB_SERIAL_CONSOLE=y # CONFIG_USB_SERIAL_GENERIC is not set # CONFIG_USB_SERIAL_AIRPRIME is not set # CONFIG_USB_SERIAL_ANYDATA is not set +# CONFIG_USB_SERIAL_ARK3116 is not set # CONFIG_USB_SERIAL_BELKIN is not set # CONFIG_USB_SERIAL_WHITEHEAT is not set # CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set @@ -833,6 +858,7 @@ CONFIG_USB_SERIAL_PL2303=y # CONFIG_USB_SERIAL_TI is not set # CONFIG_USB_SERIAL_CYBERJACK is not set # CONFIG_USB_SERIAL_XIRCOM is not set +# CONFIG_USB_SERIAL_OPTION is not set # CONFIG_USB_SERIAL_OMNINET is not set # @@ -845,10 +871,12 @@ CONFIG_USB_SERIAL_PL2303=y # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set # CONFIG_USB_LED is not set +# CONFIG_USB_CY7C63 is not set # CONFIG_USB_CYTHERM is not set # CONFIG_USB_PHIDGETKIT is not set # CONFIG_USB_PHIDGETSERVO is not set # CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_APPLEDISPLAY is not set # CONFIG_USB_LD is not set # CONFIG_USB_TEST is not set @@ -880,17 +908,24 @@ CONFIG_RTC_HCTOSYS_DEVICE="rtc0" CONFIG_RTC_INTF_SYSFS=y CONFIG_RTC_INTF_PROC=y CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set # # RTC drivers # # CONFIG_RTC_DRV_X1205 is not set +# CONFIG_RTC_DRV_DS1307 is not set +# CONFIG_RTC_DRV_DS1553 is not set # CONFIG_RTC_DRV_DS1672 is not set +# CONFIG_RTC_DRV_DS1742 is not set # CONFIG_RTC_DRV_PCF8563 is not set +# CONFIG_RTC_DRV_PCF8583 is not set # CONFIG_RTC_DRV_RS5C372 is not set CONFIG_RTC_DRV_M48T86=y CONFIG_RTC_DRV_EP93XX=y +# CONFIG_RTC_DRV_PL031 is not set # CONFIG_RTC_DRV_TEST is not set +# CONFIG_RTC_DRV_V3020 is not set # # File systems @@ -910,6 +945,7 @@ CONFIG_JBD=y # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set @@ -957,6 +993,7 @@ CONFIG_JFFS2_FS=y CONFIG_JFFS2_FS_DEBUG=0 CONFIG_JFFS2_FS_WRITEBUFFER=y # CONFIG_JFFS2_SUMMARY is not set +# CONFIG_JFFS2_FS_XATTR is not set # CONFIG_JFFS2_COMPRESSION_OPTIONS is not set CONFIG_JFFS2_ZLIB=y CONFIG_JFFS2_RTIME=y @@ -986,6 +1023,7 @@ CONFIG_SUNRPC=y # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set # CONFIG_CIFS is not set +# CONFIG_CIFS_DEBUG2 is not set # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set @@ -1066,15 +1104,20 @@ CONFIG_NLS_ISO8859_1=y # # CONFIG_PRINTK_TIME is not set CONFIG_MAGIC_SYSRQ=y +# CONFIG_UNUSED_SYMBOLS is not set CONFIG_DEBUG_KERNEL=y CONFIG_LOG_BUF_SHIFT=14 CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_SCHEDSTATS is not set CONFIG_DEBUG_SLAB=y # CONFIG_DEBUG_SLAB_LEAK is not set -CONFIG_DEBUG_MUTEXES=y +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set CONFIG_DEBUG_SPINLOCK=y +CONFIG_DEBUG_MUTEXES=y +# CONFIG_DEBUG_RWSEMS is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set # CONFIG_DEBUG_KOBJECT is not set CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_INFO is not set @@ -1114,3 +1157,4 @@ CONFIG_CRC32=y CONFIG_LIBCRC32C=y CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=y +CONFIG_PLIST=y diff --git a/arch/arm/configs/ixp2000_defconfig b/arch/arm/configs/ixp2000_defconfig index e6f3e4873d6..27b3e31a8ad 100644 --- a/arch/arm/configs/ixp2000_defconfig +++ b/arch/arm/configs/ixp2000_defconfig @@ -1,14 +1,18 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.17-rc2 -# Wed Apr 19 21:12:49 2006 +# Linux kernel version: 2.6.18-rc1 +# Sun Jul 9 15:28:50 2006 # CONFIG_ARM=y CONFIG_MMU=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_PROBE=y CONFIG_RWSEM_GENERIC_SPINLOCK=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_VECTORS_BASE=0xffff0000 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # # Code maturity level options @@ -43,14 +47,15 @@ CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y +CONFIG_RT_MUTEXES=y CONFIG_FUTEX=y CONFIG_EPOLL=y CONFIG_SHMEM=y CONFIG_SLAB=y +CONFIG_VM_EVENT_COUNTERS=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 # CONFIG_SLOB is not set -CONFIG_OBSOLETE_INTERMODULE=y # # Loadable module support @@ -83,18 +88,26 @@ CONFIG_DEFAULT_IOSCHED="anticipatory" # # System Type # +# CONFIG_ARCH_AAEC2000 is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_AT91 is not set # CONFIG_ARCH_CLPS7500 is not set # CONFIG_ARCH_CLPS711X is not set # CONFIG_ARCH_CO285 is not set # CONFIG_ARCH_EBSA110 is not set # CONFIG_ARCH_EP93XX is not set # CONFIG_ARCH_FOOTBRIDGE is not set -# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_IMX is not set # CONFIG_ARCH_IOP3XX is not set # CONFIG_ARCH_IXP4XX is not set CONFIG_ARCH_IXP2000=y # CONFIG_ARCH_IXP23XX is not set # CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_PNX4008 is not set # CONFIG_ARCH_PXA is not set # CONFIG_ARCH_RPC is not set # CONFIG_ARCH_SA1100 is not set @@ -102,12 +115,6 @@ CONFIG_ARCH_IXP2000=y # CONFIG_ARCH_SHARK is not set # CONFIG_ARCH_LH7A40X is not set # CONFIG_ARCH_OMAP is not set -# CONFIG_ARCH_VERSATILE is not set -# CONFIG_ARCH_REALVIEW is not set -# CONFIG_ARCH_IMX is not set -# CONFIG_ARCH_H720X is not set -# CONFIG_ARCH_AAEC2000 is not set -# CONFIG_ARCH_AT91RM9200 is not set CONFIG_ARCH_SUPPORTS_BIG_ENDIAN=y # @@ -171,6 +178,7 @@ CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set CONFIG_SPLIT_PTLOCK_CPUS=4096 +# CONFIG_RESOURCES_64BIT is not set CONFIG_ALIGNMENT_TRAP=y # @@ -218,6 +226,8 @@ CONFIG_NET=y CONFIG_PACKET=y CONFIG_PACKET_MMAP=y CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set # CONFIG_NET_KEY is not set CONFIG_INET=y # CONFIG_IP_MULTICAST is not set @@ -236,6 +246,8 @@ CONFIG_SYN_COOKIES=y # CONFIG_INET_IPCOMP is not set # CONFIG_INET_XFRM_TUNNEL is not set # CONFIG_INET_TUNNEL is not set +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set @@ -243,6 +255,7 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_IPV6 is not set # CONFIG_INET6_XFRM_TUNNEL is not set # CONFIG_INET6_TUNNEL is not set +# CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set # @@ -297,6 +310,7 @@ CONFIG_STANDALONE=y # CONFIG_PREVENT_FIRMWARE_BUILD is not set # CONFIG_FW_LOADER is not set # CONFIG_DEBUG_DRIVER is not set +# CONFIG_SYS_HYPERVISOR is not set # # Connector - unified userspace <-> kernelspace linker @@ -525,6 +539,7 @@ CONFIG_ENP2611_MSF_NET=y # CONFIG_CHELSIO_T1 is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set +# CONFIG_MYRI10GE is not set # # Token Ring devices @@ -542,7 +557,6 @@ CONFIG_ENP2611_MSF_NET=y CONFIG_WAN=y # CONFIG_DSCC4 is not set # CONFIG_LANMEDIA is not set -# CONFIG_SYNCLINK_SYNCPPP is not set CONFIG_HDLC=y CONFIG_HDLC_RAW=y # CONFIG_HDLC_RAW_ETH is not set @@ -654,6 +668,7 @@ CONFIG_IXP2000_WATCHDOG=y # # CONFIG_PCIPCWATCHDOG is not set # CONFIG_WDTPCI is not set +# CONFIG_HW_RANDOM is not set # CONFIG_NVRAM is not set # CONFIG_DTLK is not set # CONFIG_R3964 is not set @@ -697,6 +712,7 @@ CONFIG_I2C_ALGOBIT=y # CONFIG_I2C_PIIX4 is not set CONFIG_I2C_IXP2000=y # CONFIG_I2C_NFORCE2 is not set +# CONFIG_I2C_OCORES is not set # CONFIG_I2C_PARPORT_LIGHT is not set # CONFIG_I2C_PROSAVAGE is not set # CONFIG_I2C_SAVAGE4 is not set @@ -733,13 +749,13 @@ CONFIG_SENSORS_EEPROM=y # # Dallas's 1-wire bus # -# CONFIG_W1 is not set # # Hardware Monitoring support # CONFIG_HWMON=y # CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_ABITUGURU is not set # CONFIG_SENSORS_ADM1021 is not set # CONFIG_SENSORS_ADM1025 is not set # CONFIG_SENSORS_ADM1026 is not set @@ -768,10 +784,12 @@ CONFIG_HWMON=y # CONFIG_SENSORS_PC87360 is not set # CONFIG_SENSORS_SIS5595 is not set # CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_SMSC47M192 is not set # CONFIG_SENSORS_SMSC47B397 is not set # CONFIG_SENSORS_VIA686A is not set # CONFIG_SENSORS_VT8231 is not set # CONFIG_SENSORS_W83781D is not set +# CONFIG_SENSORS_W83791D is not set # CONFIG_SENSORS_W83792D is not set # CONFIG_SENSORS_W83L785TS is not set # CONFIG_SENSORS_W83627HF is not set @@ -799,6 +817,7 @@ CONFIG_HWMON=y # Multimedia devices # # CONFIG_VIDEO_DEV is not set +CONFIG_VIDEO_V4L2=y # # Digital Video Broadcasting Devices @@ -808,6 +827,7 @@ CONFIG_HWMON=y # # Graphics support # +# CONFIG_FIRMWARE_EDID is not set # CONFIG_FB is not set # @@ -866,6 +886,7 @@ CONFIG_FS_POSIX_ACL=y # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set @@ -910,6 +931,7 @@ CONFIG_JFFS2_FS=y CONFIG_JFFS2_FS_DEBUG=0 CONFIG_JFFS2_FS_WRITEBUFFER=y # CONFIG_JFFS2_SUMMARY is not set +# CONFIG_JFFS2_FS_XATTR is not set # CONFIG_JFFS2_COMPRESSION_OPTIONS is not set CONFIG_JFFS2_ZLIB=y CONFIG_JFFS2_RTIME=y @@ -939,6 +961,7 @@ CONFIG_SUNRPC=y # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set # CONFIG_CIFS is not set +# CONFIG_CIFS_DEBUG2 is not set # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set @@ -980,14 +1003,19 @@ CONFIG_MSDOS_PARTITION=y # # CONFIG_PRINTK_TIME is not set CONFIG_MAGIC_SYSRQ=y +# CONFIG_UNUSED_SYMBOLS is not set CONFIG_DEBUG_KERNEL=y CONFIG_LOG_BUF_SHIFT=14 CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_SCHEDSTATS is not set # CONFIG_DEBUG_SLAB is not set -CONFIG_DEBUG_MUTEXES=y +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set +CONFIG_DEBUG_MUTEXES=y +# CONFIG_DEBUG_RWSEMS is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set # CONFIG_DEBUG_KOBJECT is not set CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_INFO is not set @@ -1027,3 +1055,4 @@ CONFIG_CRC32=y # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=y +CONFIG_PLIST=y diff --git a/arch/arm/configs/ixp23xx_defconfig b/arch/arm/configs/ixp23xx_defconfig index 9ce898a6cf8..7b18997083c 100644 --- a/arch/arm/configs/ixp23xx_defconfig +++ b/arch/arm/configs/ixp23xx_defconfig @@ -1,14 +1,18 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.17-rc2 -# Wed Apr 19 21:13:50 2006 +# Linux kernel version: 2.6.18-rc1 +# Sun Jul 9 14:13:35 2006 # CONFIG_ARM=y CONFIG_MMU=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_PROBE=y CONFIG_RWSEM_GENERIC_SPINLOCK=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_VECTORS_BASE=0xffff0000 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # # Code maturity level options @@ -43,14 +47,15 @@ CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y +CONFIG_RT_MUTEXES=y CONFIG_FUTEX=y CONFIG_EPOLL=y CONFIG_SHMEM=y CONFIG_SLAB=y +CONFIG_VM_EVENT_COUNTERS=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 # CONFIG_SLOB is not set -CONFIG_OBSOLETE_INTERMODULE=y # # Loadable module support @@ -83,18 +88,26 @@ CONFIG_DEFAULT_IOSCHED="anticipatory" # # System Type # +# CONFIG_ARCH_AAEC2000 is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_AT91 is not set # CONFIG_ARCH_CLPS7500 is not set # CONFIG_ARCH_CLPS711X is not set # CONFIG_ARCH_CO285 is not set # CONFIG_ARCH_EBSA110 is not set # CONFIG_ARCH_EP93XX is not set # CONFIG_ARCH_FOOTBRIDGE is not set -# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_IMX is not set # CONFIG_ARCH_IOP3XX is not set # CONFIG_ARCH_IXP4XX is not set # CONFIG_ARCH_IXP2000 is not set CONFIG_ARCH_IXP23XX=y # CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_PNX4008 is not set # CONFIG_ARCH_PXA is not set # CONFIG_ARCH_RPC is not set # CONFIG_ARCH_SA1100 is not set @@ -102,12 +115,6 @@ CONFIG_ARCH_IXP23XX=y # CONFIG_ARCH_SHARK is not set # CONFIG_ARCH_LH7A40X is not set # CONFIG_ARCH_OMAP is not set -# CONFIG_ARCH_VERSATILE is not set -# CONFIG_ARCH_REALVIEW is not set -# CONFIG_ARCH_IMX is not set -# CONFIG_ARCH_H720X is not set -# CONFIG_ARCH_AAEC2000 is not set -# CONFIG_ARCH_AT91RM9200 is not set CONFIG_ARCH_SUPPORTS_BIG_ENDIAN=y # @@ -165,6 +172,7 @@ CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set CONFIG_SPLIT_PTLOCK_CPUS=4096 +CONFIG_RESOURCES_64BIT=y CONFIG_ALIGNMENT_TRAP=y # @@ -212,6 +220,8 @@ CONFIG_NET=y CONFIG_PACKET=y CONFIG_PACKET_MMAP=y CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set # CONFIG_NET_KEY is not set CONFIG_INET=y # CONFIG_IP_MULTICAST is not set @@ -230,6 +240,8 @@ CONFIG_SYN_COOKIES=y # CONFIG_INET_IPCOMP is not set # CONFIG_INET_XFRM_TUNNEL is not set # CONFIG_INET_TUNNEL is not set +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set @@ -237,6 +249,7 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_IPV6 is not set # CONFIG_INET6_XFRM_TUNNEL is not set # CONFIG_INET6_TUNNEL is not set +# CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set # @@ -291,6 +304,7 @@ CONFIG_STANDALONE=y # CONFIG_PREVENT_FIRMWARE_BUILD is not set # CONFIG_FW_LOADER is not set # CONFIG_DEBUG_DRIVER is not set +# CONFIG_SYS_HYPERVISOR is not set # # Connector - unified userspace <-> kernelspace linker @@ -520,6 +534,7 @@ CONFIG_BLK_DEV_SD=y # CONFIG_MEGARAID_LEGACY is not set # CONFIG_MEGARAID_SAS is not set # CONFIG_SCSI_SATA is not set +# CONFIG_SCSI_HPTIOP is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set # CONFIG_SCSI_IPS is not set @@ -641,6 +656,7 @@ CONFIG_E1000_NAPI=y # CONFIG_CHELSIO_T1 is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set +# CONFIG_MYRI10GE is not set # # Token Ring devices @@ -658,7 +674,6 @@ CONFIG_E1000_NAPI=y CONFIG_WAN=y # CONFIG_DSCC4 is not set # CONFIG_LANMEDIA is not set -# CONFIG_SYNCLINK_SYNCPPP is not set CONFIG_HDLC=y CONFIG_HDLC_RAW=y # CONFIG_HDLC_RAW_ETH is not set @@ -775,6 +790,7 @@ CONFIG_WATCHDOG=y # USB-based Watchdog Cards # # CONFIG_USBPCWATCHDOG is not set +# CONFIG_HW_RANDOM is not set # CONFIG_NVRAM is not set # CONFIG_DTLK is not set # CONFIG_R3964 is not set @@ -817,6 +833,7 @@ CONFIG_I2C_ALGOBIT=y # CONFIG_I2C_I810 is not set # CONFIG_I2C_PIIX4 is not set # CONFIG_I2C_NFORCE2 is not set +# CONFIG_I2C_OCORES is not set # CONFIG_I2C_PARPORT_LIGHT is not set # CONFIG_I2C_PROSAVAGE is not set # CONFIG_I2C_SAVAGE4 is not set @@ -853,13 +870,13 @@ CONFIG_SENSORS_EEPROM=y # # Dallas's 1-wire bus # -# CONFIG_W1 is not set # # Hardware Monitoring support # CONFIG_HWMON=y # CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_ABITUGURU is not set # CONFIG_SENSORS_ADM1021 is not set # CONFIG_SENSORS_ADM1025 is not set # CONFIG_SENSORS_ADM1026 is not set @@ -888,10 +905,12 @@ CONFIG_HWMON=y # CONFIG_SENSORS_PC87360 is not set # CONFIG_SENSORS_SIS5595 is not set # CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_SMSC47M192 is not set # CONFIG_SENSORS_SMSC47B397 is not set # CONFIG_SENSORS_VIA686A is not set # CONFIG_SENSORS_VT8231 is not set # CONFIG_SENSORS_W83781D is not set +# CONFIG_SENSORS_W83791D is not set # CONFIG_SENSORS_W83792D is not set # CONFIG_SENSORS_W83L785TS is not set # CONFIG_SENSORS_W83627HF is not set @@ -919,6 +938,7 @@ CONFIG_HWMON=y # Multimedia devices # # CONFIG_VIDEO_DEV is not set +CONFIG_VIDEO_V4L2=y # # Digital Video Broadcasting Devices @@ -929,6 +949,7 @@ CONFIG_HWMON=y # # Graphics support # +# CONFIG_FIRMWARE_EDID is not set # CONFIG_FB is not set # @@ -959,6 +980,7 @@ CONFIG_USB=y CONFIG_USB_EHCI_HCD=y # CONFIG_USB_EHCI_SPLIT_ISO is not set # CONFIG_USB_EHCI_ROOT_HUB_TT is not set +# CONFIG_USB_EHCI_TT_NEWSCHED is not set # CONFIG_USB_ISP116X_HCD is not set CONFIG_USB_OHCI_HCD=y # CONFIG_USB_OHCI_BIG_ENDIAN is not set @@ -1050,10 +1072,12 @@ CONFIG_USB_MON=y # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set # CONFIG_USB_LED is not set +# CONFIG_USB_CY7C63 is not set # CONFIG_USB_CYTHERM is not set # CONFIG_USB_PHIDGETKIT is not set # CONFIG_USB_PHIDGETSERVO is not set # CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_APPLEDISPLAY is not set # CONFIG_USB_SISUSBVGA is not set # CONFIG_USB_LD is not set @@ -1100,6 +1124,7 @@ CONFIG_FS_POSIX_ACL=y # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set @@ -1146,6 +1171,7 @@ CONFIG_JFFS2_FS=y CONFIG_JFFS2_FS_DEBUG=0 CONFIG_JFFS2_FS_WRITEBUFFER=y # CONFIG_JFFS2_SUMMARY is not set +# CONFIG_JFFS2_FS_XATTR is not set # CONFIG_JFFS2_COMPRESSION_OPTIONS is not set CONFIG_JFFS2_ZLIB=y CONFIG_JFFS2_RTIME=y @@ -1175,6 +1201,7 @@ CONFIG_SUNRPC=y # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set # CONFIG_CIFS is not set +# CONFIG_CIFS_DEBUG2 is not set # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set @@ -1255,14 +1282,19 @@ CONFIG_NLS_CODEPAGE_437=y # # CONFIG_PRINTK_TIME is not set CONFIG_MAGIC_SYSRQ=y +# CONFIG_UNUSED_SYMBOLS is not set CONFIG_DEBUG_KERNEL=y CONFIG_LOG_BUF_SHIFT=14 CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_SCHEDSTATS is not set # CONFIG_DEBUG_SLAB is not set -CONFIG_DEBUG_MUTEXES=y +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set +CONFIG_DEBUG_MUTEXES=y +# CONFIG_DEBUG_RWSEMS is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set # CONFIG_DEBUG_KOBJECT is not set CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_INFO is not set @@ -1302,3 +1334,4 @@ CONFIG_CRC32=y # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=y +CONFIG_PLIST=y diff --git a/arch/arm/configs/lpd270_defconfig b/arch/arm/configs/lpd270_defconfig index d08bbe59483..4b29e099640 100644 --- a/arch/arm/configs/lpd270_defconfig +++ b/arch/arm/configs/lpd270_defconfig @@ -1,15 +1,19 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.17-git2 -# Wed Jun 21 22:20:18 2006 +# Linux kernel version: 2.6.18-rc1 +# Sun Jul 9 14:15:23 2006 # CONFIG_ARM=y CONFIG_MMU=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_PROBE=y CONFIG_RWSEM_GENERIC_SPINLOCK=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_ARCH_MTD_XIP=y CONFIG_VECTORS_BASE=0xffff0000 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # # Code maturity level options @@ -43,10 +47,12 @@ CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y +CONFIG_RT_MUTEXES=y CONFIG_FUTEX=y CONFIG_EPOLL=y CONFIG_SHMEM=y CONFIG_SLAB=y +CONFIG_VM_EVENT_COUNTERS=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 # CONFIG_SLOB is not set @@ -85,7 +91,7 @@ CONFIG_DEFAULT_IOSCHED="anticipatory" # CONFIG_ARCH_INTEGRATOR is not set # CONFIG_ARCH_REALVIEW is not set # CONFIG_ARCH_VERSATILE is not set -# CONFIG_ARCH_AT91RM9200 is not set +# CONFIG_ARCH_AT91 is not set # CONFIG_ARCH_CLPS7500 is not set # CONFIG_ARCH_CLPS711X is not set # CONFIG_ARCH_CO285 is not set @@ -117,6 +123,7 @@ CONFIG_MACH_LOGICPD_PXA270=y # CONFIG_MACH_MAINSTONE is not set # CONFIG_ARCH_PXA_IDP is not set # CONFIG_PXA_SHARPSL is not set +# CONFIG_MACH_TRIZEPS4 is not set CONFIG_PXA27x=y CONFIG_IWMMXT=y @@ -161,6 +168,7 @@ CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set CONFIG_SPLIT_PTLOCK_CPUS=4096 +# CONFIG_RESOURCES_64BIT is not set CONFIG_ALIGNMENT_TRAP=y # @@ -194,8 +202,6 @@ CONFIG_BINFMT_ELF=y # Power management options # # CONFIG_PM is not set -# CONFIG_PM_LEGACY is not set -# CONFIG_PM_DEBUG is not set # CONFIG_APM is not set # @@ -293,6 +299,7 @@ CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_FW_LOADER is not set # CONFIG_DEBUG_DRIVER is not set +# CONFIG_SYS_HYPERVISOR is not set # # Connector - unified userspace <-> kernelspace linker @@ -561,6 +568,7 @@ CONFIG_SERIO_LIBPS2=y CONFIG_VT=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set # CONFIG_SERIAL_NONSTANDARD is not set # @@ -588,6 +596,7 @@ CONFIG_LEGACY_PTY_COUNT=256 # Watchdog Cards # # CONFIG_WATCHDOG is not set +# CONFIG_HW_RANDOM is not set # CONFIG_NVRAM is not set # CONFIG_DTLK is not set # CONFIG_R3964 is not set @@ -617,13 +626,13 @@ CONFIG_LEGACY_PTY_COUNT=256 # # Dallas's 1-wire bus # -# CONFIG_W1 is not set # # Hardware Monitoring support # CONFIG_HWMON=y # CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_ABITUGURU is not set # CONFIG_SENSORS_F71805F is not set # CONFIG_HWMON_DEBUG_CHIP is not set @@ -658,12 +667,13 @@ CONFIG_VIDEO_V4L2=y # # Graphics support # +# CONFIG_FIRMWARE_EDID is not set CONFIG_FB=y CONFIG_FB_CFB_FILLRECT=y CONFIG_FB_CFB_COPYAREA=y CONFIG_FB_CFB_IMAGEBLIT=y # CONFIG_FB_MACMODES is not set -CONFIG_FB_FIRMWARE_EDID=y +# CONFIG_FB_BACKLIGHT is not set # CONFIG_FB_MODE_HELPERS is not set # CONFIG_FB_TILEBLITTING is not set # CONFIG_FB_S1D13XXX is not set @@ -822,6 +832,7 @@ CONFIG_JFFS2_FS=y CONFIG_JFFS2_FS_DEBUG=0 CONFIG_JFFS2_FS_WRITEBUFFER=y # CONFIG_JFFS2_SUMMARY is not set +# CONFIG_JFFS2_FS_XATTR is not set # CONFIG_JFFS2_COMPRESSION_OPTIONS is not set CONFIG_JFFS2_ZLIB=y CONFIG_JFFS2_RTIME=y @@ -849,6 +860,7 @@ CONFIG_SUNRPC=y # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set # CONFIG_CIFS is not set +# CONFIG_CIFS_DEBUG2 is not set # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set @@ -914,14 +926,19 @@ CONFIG_NLS_ISO8859_1=y # # CONFIG_PRINTK_TIME is not set CONFIG_MAGIC_SYSRQ=y +# CONFIG_UNUSED_SYMBOLS is not set CONFIG_DEBUG_KERNEL=y CONFIG_LOG_BUF_SHIFT=14 CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_SCHEDSTATS is not set # CONFIG_DEBUG_SLAB is not set -# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_RWSEMS is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set # CONFIG_DEBUG_KOBJECT is not set CONFIG_DEBUG_BUGVERBOSE=y CONFIG_DEBUG_INFO=y @@ -961,3 +978,4 @@ CONFIG_CRC32=y # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=y +CONFIG_PLIST=y diff --git a/arch/arm/configs/onearm_defconfig b/arch/arm/configs/onearm_defconfig index 2b4a63be03f..6a93e3aae10 100644 --- a/arch/arm/configs/onearm_defconfig +++ b/arch/arm/configs/onearm_defconfig @@ -1,14 +1,18 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.17-git10 -# Mon Jun 26 13:45:44 2006 +# Linux kernel version: 2.6.18-rc1 +# Sun Jul 9 14:16:20 2006 # CONFIG_ARM=y CONFIG_MMU=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_PROBE=y CONFIG_RWSEM_GENERIC_SPINLOCK=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_VECTORS_BASE=0xffff0000 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # # Code maturity level options @@ -42,10 +46,12 @@ CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y +CONFIG_RT_MUTEXES=y CONFIG_FUTEX=y CONFIG_EPOLL=y CONFIG_SHMEM=y CONFIG_SLAB=y +CONFIG_VM_EVENT_COUNTERS=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 # CONFIG_SLOB is not set @@ -86,7 +92,6 @@ CONFIG_DEFAULT_IOSCHED="anticipatory" # CONFIG_ARCH_REALVIEW is not set # CONFIG_ARCH_VERSATILE is not set CONFIG_ARCH_AT91=y -CONFIG_ARCH_AT91RM9200=y # CONFIG_ARCH_CLPS7500 is not set # CONFIG_ARCH_CLPS711X is not set # CONFIG_ARCH_CO285 is not set @@ -111,8 +116,15 @@ CONFIG_ARCH_AT91RM9200=y # CONFIG_ARCH_OMAP is not set # -# AT91RM9200 Implementations +# Atmel AT91 System-on-Chip +# + # +# Atmel AT91 Processors +# +CONFIG_ARCH_AT91RM9200=y +# CONFIG_ARCH_AT91SAM9260 is not set +# CONFIG_ARCH_AT91SAM9261 is not set # # AT91RM9200 Board Type @@ -123,12 +135,12 @@ CONFIG_MACH_ONEARM=y # CONFIG_MACH_CSB337 is not set # CONFIG_MACH_CSB637 is not set # CONFIG_MACH_CARMEVA is not set -# CONFIG_MACH_KB9200 is not set # CONFIG_MACH_ATEB9200 is not set +# CONFIG_MACH_KB9200 is not set # CONFIG_MACH_KAFA is not set # -# AT91RM9200 Feature Selections +# AT91 Feature Selections # CONFIG_AT91_PROGRAMMABLE_CLOCKS=y @@ -186,6 +198,7 @@ CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set CONFIG_SPLIT_PTLOCK_CPUS=4096 +# CONFIG_RESOURCES_64BIT is not set CONFIG_LEDS=y CONFIG_LEDS_TIMER=y # CONFIG_LEDS_CPU is not set @@ -600,6 +613,7 @@ CONFIG_AT91_WATCHDOG=y # USB-based Watchdog Cards # # CONFIG_USBPCWATCHDOG is not set +# CONFIG_HW_RANDOM is not set # CONFIG_NVRAM is not set # CONFIG_DTLK is not set # CONFIG_R3964 is not set @@ -743,6 +757,7 @@ CONFIG_VIDEO_V4L2=y # # Graphics support # +# CONFIG_FIRMWARE_EDID is not set # CONFIG_FB is not set # @@ -980,6 +995,7 @@ CONFIG_SUNRPC=y # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set # CONFIG_CIFS is not set +# CONFIG_CIFS_DEBUG2 is not set # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set @@ -1006,14 +1022,19 @@ CONFIG_MSDOS_PARTITION=y # # CONFIG_PRINTK_TIME is not set # CONFIG_MAGIC_SYSRQ is not set +# CONFIG_UNUSED_SYMBOLS is not set CONFIG_DEBUG_KERNEL=y CONFIG_LOG_BUF_SHIFT=14 CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_SCHEDSTATS is not set # CONFIG_DEBUG_SLAB is not set -# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_RWSEMS is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set # CONFIG_DEBUG_KOBJECT is not set CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_INFO is not set @@ -1052,3 +1073,4 @@ CONFIG_DEBUG_LL=y CONFIG_CRC32=y # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y +CONFIG_PLIST=y diff --git a/arch/arm/kernel/bios32.c b/arch/arm/kernel/bios32.c index 964faac104f..240c448ec31 100644 --- a/arch/arm/kernel/bios32.c +++ b/arch/arm/kernel/bios32.c @@ -370,17 +370,6 @@ void __devinit pcibios_fixup_bus(struct pci_bus *bus) features &= ~(PCI_COMMAND_SERR | PCI_COMMAND_PARITY); switch (dev->class >> 8) { -#if defined(CONFIG_ISA) || defined(CONFIG_EISA) - case PCI_CLASS_BRIDGE_ISA: - case PCI_CLASS_BRIDGE_EISA: - /* - * If this device is an ISA bridge, set isa_bridge - * to point at this device. We will then go looking - * for things like keyboard, etc. - */ - isa_bridge = dev; - break; -#endif case PCI_CLASS_BRIDGE_PCI: pci_read_config_word(dev, PCI_BRIDGE_CONTROL, &status); status |= PCI_BRIDGE_CTL_PARITY|PCI_BRIDGE_CTL_MASTER_ABORT; diff --git a/arch/arm/kernel/irq.c b/arch/arm/kernel/irq.c index c3d4e94ef5b..626feeec0ad 100644 --- a/arch/arm/kernel/irq.c +++ b/arch/arm/kernel/irq.c @@ -167,6 +167,16 @@ void __init init_IRQ(void) } #ifdef CONFIG_HOTPLUG_CPU + +static void route_irq(struct irqdesc *desc, unsigned int irq, unsigned int cpu) +{ + pr_debug("IRQ%u: moving from cpu%u to cpu%u\n", irq, desc->cpu, cpu); + + spin_lock_irq(&desc->lock); + desc->chip->set_affinity(irq, cpumask_of_cpu(cpu)); + spin_unlock_irq(&desc->lock); +} + /* * The CPU has been marked offline. Migrate IRQs off this CPU. If * the affinity settings do not allow other CPUs, force them onto any diff --git a/arch/arm/mach-sa1100/collie.c b/arch/arm/mach-sa1100/collie.c index a6bab50dab6..a0dfa390e34 100644 --- a/arch/arm/mach-sa1100/collie.c +++ b/arch/arm/mach-sa1100/collie.c @@ -83,8 +83,8 @@ static struct scoop_pcmcia_config collie_pcmcia_config = { static struct mcp_plat_data collie_mcp_data = { - .mccr0 = MCCR0_ADM, - .sclk_rate = 11981000, + .mccr0 = MCCR0_ADM | MCCR0_ExtClk, + .sclk_rate = 9216000, }; #ifdef CONFIG_SHARP_LOCOMO diff --git a/arch/arm/mach-sa1100/collie_pm.c b/arch/arm/mach-sa1100/collie_pm.c index 45b1e71f111..1e25b1d19fc 100644 --- a/arch/arm/mach-sa1100/collie_pm.c +++ b/arch/arm/mach-sa1100/collie_pm.c @@ -9,6 +9,9 @@ * Li-ion batteries are angry beasts, and they like to explode. This driver is not finished, * and sometimes charges them when it should not. If it makes angry lithium to come your way... * ...well, you have been warned. + * + * Actually, this should be quite safe, it seems sharp leaves charger enabled by default, + * and my collie did not explode (yet). */ #include <linux/module.h> @@ -40,9 +43,8 @@ static void collie_charger_init(void) { int err; - if (sharpsl_param.adadj != -1) { + if (sharpsl_param.adadj != -1) ad_revise = sharpsl_param.adadj; - } /* Register interrupt handler. */ if ((err = request_irq(COLLIE_IRQ_GPIO_AC_IN, sharpsl_ac_isr, IRQF_DISABLED, @@ -72,27 +74,17 @@ static void collie_measure_temp(int on) static void collie_charge(int on) { - if (on) { - printk("Should start charger\n"); - } else { - printk("Should stop charger\n"); - } -#ifdef I_AM_SURE + extern struct platform_device colliescoop_device; - /* Zaurus seems to contain LTC1731 ; it should know when to + /* Zaurus seems to contain LTC1731; it should know when to * stop charging itself, so setting charge on should be * relatively harmless (as long as it is not done too often). */ -#define CF_BUF_CTRL_BASE 0xF0800000 -#define SCOOP_REG(adr) (*(volatile unsigned short*)(CF_BUF_CTRL_BASE+(adr))) -#define SCOOP_REG_GPWR SCOOP_REG(SCOOP_GPWR) - if (on) { set_scoop_gpio(&colliescoop_device.dev, COLLIE_SCP_CHARGE_ON); } else { reset_scoop_gpio(&colliescoop_device.dev, COLLIE_SCP_CHARGE_ON); } -#endif } static void collie_discharge(int on) @@ -127,7 +119,6 @@ int collie_read_backup_battery(void) ucb1x00_adc_enable(ucb); - /* Gives 75..130 */ ucb1x00_io_write(ucb, COLLIE_TC35143_GPIO_BBAT_ON, 0); voltage = ucb1x00_adc_read(ucb, UCB_ADC_INP_AD1, UCB_SYNC); @@ -146,9 +137,8 @@ int collie_read_main_battery(void) ucb1x00_adc_enable(ucb); ucb1x00_io_write(ucb, 0, COLLIE_TC35143_GPIO_BBAT_ON); ucb1x00_io_write(ucb, COLLIE_TC35143_GPIO_MBAT_ON, 0); - /* gives values 160..255 with battery removed... and - 145..255 with battery inserted. (on AC), goes as low as - 80 on DC. */ + + mdelay(1); voltage = ucb1x00_adc_read(ucb, UCB_ADC_INP_AD1, UCB_SYNC); ucb1x00_io_write(ucb, 0, COLLIE_TC35143_GPIO_MBAT_ON); @@ -192,7 +182,7 @@ static unsigned long read_devdata(int which) case SHARPSL_BATT_TEMP: return collie_read_temp(); case SHARPSL_ACIN_VOLT: - return 0x1; + return 500; case SHARPSL_STATUS_ACIN: { int ret = GPLR & COLLIE_GPIO_AC_IN; printk("AC status = %d\n", ret); @@ -208,10 +198,33 @@ static unsigned long read_devdata(int which) } } +struct battery_thresh collie_battery_levels_acin[] = { + { 420, 100}, + { 417, 95}, + { 415, 90}, + { 413, 80}, + { 411, 75}, + { 408, 70}, + { 406, 60}, + { 403, 50}, + { 398, 40}, + { 391, 25}, + { 10, 5}, + { 0, 0}, +}; + struct battery_thresh collie_battery_levels[] = { - { 368, 100}, - { 358, 25}, - { 356, 5}, + { 394, 100}, + { 390, 95}, + { 380, 90}, + { 370, 80}, + { 368, 75}, /* From sharp code: battery high with frontlight */ + { 366, 70}, /* 60..90 -- fake values invented by me for testing */ + { 364, 60}, + { 362, 50}, + { 360, 40}, + { 358, 25}, /* From sharp code: battery low with frontlight */ + { 356, 5}, /* From sharp code: battery verylow with frontlight */ { 0, 0}, }; @@ -226,13 +239,21 @@ struct sharpsl_charger_machinfo collie_pm_machinfo = { .postsuspend = collie_postsuspend, .charger_wakeup = collie_charger_wakeup, .should_wakeup = collie_should_wakeup, - .bat_levels = 3, + .bat_levels = 12, .bat_levels_noac = collie_battery_levels, - .bat_levels_acin = collie_battery_levels, + .bat_levels_acin = collie_battery_levels_acin, .status_high_acin = 368, .status_low_acin = 358, .status_high_noac = 368, .status_low_noac = 358, + .charge_on_volt = 350, /* spitz uses 2.90V, but lets play it safe. */ + .charge_on_temp = 550, + .charge_acin_high = 550, /* collie does not seem to have sensor for this, anyway */ + .charge_acin_low = 450, /* ignored, too */ + .fatal_acin_volt = 356, + .fatal_noacin_volt = 356, + + .batfull_irq = 1, /* We do not want periodical charge restarts */ }; static int __init collie_pm_ucb_add(struct ucb1x00_dev *pdev) diff --git a/arch/arm/mach-versatile/core.c b/arch/arm/mach-versatile/core.c index a432539cc1b..86437717601 100644 --- a/arch/arm/mach-versatile/core.c +++ b/arch/arm/mach-versatile/core.c @@ -35,6 +35,7 @@ #include <asm/hardware/arm_timer.h> #include <asm/hardware/icst307.h> #include <asm/hardware/vic.h> +#include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/flash.h> @@ -352,11 +353,7 @@ static const struct icst307_params versatile_oscvco_params = { static void versatile_oscvco_set(struct clk *clk, struct icst307_vco vco) { void __iomem *sys_lock = __io_address(VERSATILE_SYS_BASE) + VERSATILE_SYS_LOCK_OFFSET; -#if defined(CONFIG_ARCH_VERSATILE_PB) - void __iomem *sys_osc = __io_address(VERSATILE_SYS_BASE) + VERSATILE_SYS_OSC4_OFFSET; -#elif defined(CONFIG_MACH_VERSATILE_AB) - void __iomem *sys_osc = __io_address(VERSATILE_SYS_BASE) + VERSATILE_SYS_OSC1_OFFSET; -#endif + void __iomem *sys_osc = __io_address(VERSATILE_SYS_BASE) + VERSATILE_SYS_OSCCLCD_OFFSET; u32 val; val = readl(sys_osc) & ~0x7ffff; @@ -529,7 +526,7 @@ static void versatile_clcd_disable(struct clcd_fb *fb) /* * If the LCD is Sanyo 2x5 in on the IB2 board, turn the back-light off */ - if (fb->panel == &sanyo_2_5_in) { + if (machine_is_versatile_ab() && fb->panel == &sanyo_2_5_in) { void __iomem *versatile_ib2_ctrl = __io_address(VERSATILE_IB2_CTRL); unsigned long ctrl; @@ -578,7 +575,7 @@ static void versatile_clcd_enable(struct clcd_fb *fb) /* * If the LCD is Sanyo 2x5 in on the IB2 board, turn the back-light on */ - if (fb->panel == &sanyo_2_5_in) { + if (machine_is_versatile_ab() && fb->panel == &sanyo_2_5_in) { void __iomem *versatile_ib2_ctrl = __io_address(VERSATILE_IB2_CTRL); unsigned long ctrl; diff --git a/arch/arm/nwfpe/softfloat.h b/arch/arm/nwfpe/softfloat.h index e1125bc39ee..0a3067452cd 100644 --- a/arch/arm/nwfpe/softfloat.h +++ b/arch/arm/nwfpe/softfloat.h @@ -61,7 +61,7 @@ typedef struct { u16 __padding; #endif u64 low; -} floatx80; +} __attribute__ ((packed,aligned(4))) floatx80; /* ------------------------------------------------------------------------------- diff --git a/arch/sparc/kernel/of_device.c b/arch/sparc/kernel/of_device.c index bc956c53037..5a2faad5d04 100644 --- a/arch/sparc/kernel/of_device.c +++ b/arch/sparc/kernel/of_device.c @@ -183,7 +183,7 @@ struct bus_type of_bus_type = { }; EXPORT_SYMBOL(of_bus_type); -static inline u64 of_read_addr(u32 *cell, int size) +static inline u64 of_read_addr(const u32 *cell, int size) { u64 r = 0; while (size--) @@ -209,8 +209,8 @@ struct of_bus { int (*match)(struct device_node *parent); void (*count_cells)(struct device_node *child, int *addrc, int *sizec); - u64 (*map)(u32 *addr, u32 *range, int na, int ns, int pna); - int (*translate)(u32 *addr, u64 offset, int na); + int (*map)(u32 *addr, const u32 *range, + int na, int ns, int pna); unsigned int (*get_flags)(u32 *addr); }; @@ -224,27 +224,49 @@ static void of_bus_default_count_cells(struct device_node *dev, get_cells(dev, addrc, sizec); } -static u64 of_bus_default_map(u32 *addr, u32 *range, int na, int ns, int pna) +/* Make sure the least significant 64-bits are in-range. Even + * for 3 or 4 cell values it is a good enough approximation. + */ +static int of_out_of_range(const u32 *addr, const u32 *base, + const u32 *size, int na, int ns) { - u64 cp, s, da; + u64 a = of_read_addr(addr, na); + u64 b = of_read_addr(base, na); + + if (a < b) + return 1; - cp = of_read_addr(range, na); - s = of_read_addr(range + na + pna, ns); - da = of_read_addr(addr, na); + b += of_read_addr(size, ns); + if (a >= b) + return 1; - if (da < cp || da >= (cp + s)) - return OF_BAD_ADDR; - return da - cp; + return 0; } -static int of_bus_default_translate(u32 *addr, u64 offset, int na) +static int of_bus_default_map(u32 *addr, const u32 *range, + int na, int ns, int pna) { - u64 a = of_read_addr(addr, na); - memset(addr, 0, na * 4); - a += offset; - if (na > 1) - addr[na - 2] = a >> 32; - addr[na - 1] = a & 0xffffffffu; + u32 result[OF_MAX_ADDR_CELLS]; + int i; + + if (ns > 2) { + printk("of_device: Cannot handle size cells (%d) > 2.", ns); + return -EINVAL; + } + + if (of_out_of_range(addr, range, range + na + pna, na, ns)) + return -EINVAL; + + /* Start with the parent range base. */ + memcpy(result, range + na, pna * 4); + + /* Add in the child address offset. */ + for (i = 0; i < na; i++) + result[pna - 1 - i] += + (addr[na - 1 - i] - + range[na - 1 - i]); + + memcpy(addr, result, pna * 4); return 0; } @@ -254,14 +276,26 @@ static unsigned int of_bus_default_get_flags(u32 *addr) return IORESOURCE_MEM; } - /* * PCI bus specific translator */ static int of_bus_pci_match(struct device_node *np) { - return !strcmp(np->type, "pci") || !strcmp(np->type, "pciex"); + if (!strcmp(np->type, "pci") || !strcmp(np->type, "pciex")) { + /* Do not do PCI specific frobbing if the + * PCI bridge lacks a ranges property. We + * want to pass it through up to the next + * parent as-is, not with the PCI translate + * method which chops off the top address cell. + */ + if (!of_find_property(np, "ranges", NULL)) + return 0; + + return 1; + } + + return 0; } static void of_bus_pci_count_cells(struct device_node *np, @@ -273,27 +307,32 @@ static void of_bus_pci_count_cells(struct device_node *np, *sizec = 2; } -static u64 of_bus_pci_map(u32 *addr, u32 *range, int na, int ns, int pna) +static int of_bus_pci_map(u32 *addr, const u32 *range, + int na, int ns, int pna) { - u64 cp, s, da; + u32 result[OF_MAX_ADDR_CELLS]; + int i; /* Check address type match */ if ((addr[0] ^ range[0]) & 0x03000000) - return OF_BAD_ADDR; + return -EINVAL; - /* Read address values, skipping high cell */ - cp = of_read_addr(range + 1, na - 1); - s = of_read_addr(range + na + pna, ns); - da = of_read_addr(addr + 1, na - 1); + if (of_out_of_range(addr + 1, range + 1, range + na + pna, + na - 1, ns)) + return -EINVAL; - if (da < cp || da >= (cp + s)) - return OF_BAD_ADDR; - return da - cp; -} + /* Start with the parent range base. */ + memcpy(result, range + na, pna * 4); -static int of_bus_pci_translate(u32 *addr, u64 offset, int na) -{ - return of_bus_default_translate(addr + 1, offset, na - 1); + /* Add in the child address offset, skipping high cell. */ + for (i = 0; i < na - 1; i++) + result[pna - 1 - i] += + (addr[na - 1 - i] - + range[na - 1 - i]); + + memcpy(addr, result, pna * 4); + + return 0; } static unsigned int of_bus_pci_get_flags(u32 *addr) @@ -332,16 +371,11 @@ static void of_bus_sbus_count_cells(struct device_node *child, *sizec = 1; } -static u64 of_bus_sbus_map(u32 *addr, u32 *range, int na, int ns, int pna) +static int of_bus_sbus_map(u32 *addr, const u32 *range, int na, int ns, int pna) { return of_bus_default_map(addr, range, na, ns, pna); } -static int of_bus_sbus_translate(u32 *addr, u64 offset, int na) -{ - return of_bus_default_translate(addr, offset, na); -} - static unsigned int of_bus_sbus_get_flags(u32 *addr) { return IORESOURCE_MEM; @@ -360,7 +394,6 @@ static struct of_bus of_busses[] = { .match = of_bus_pci_match, .count_cells = of_bus_pci_count_cells, .map = of_bus_pci_map, - .translate = of_bus_pci_translate, .get_flags = of_bus_pci_get_flags, }, /* SBUS */ @@ -370,7 +403,6 @@ static struct of_bus of_busses[] = { .match = of_bus_sbus_match, .count_cells = of_bus_sbus_count_cells, .map = of_bus_sbus_map, - .translate = of_bus_sbus_translate, .get_flags = of_bus_sbus_get_flags, }, /* Default */ @@ -380,7 +412,6 @@ static struct of_bus of_busses[] = { .match = NULL, .count_cells = of_bus_default_count_cells, .map = of_bus_default_map, - .translate = of_bus_default_translate, .get_flags = of_bus_default_get_flags, }, }; @@ -405,33 +436,34 @@ static int __init build_one_resource(struct device_node *parent, u32 *ranges; unsigned int rlen; int rone; - u64 offset = OF_BAD_ADDR; ranges = of_get_property(parent, "ranges", &rlen); if (ranges == NULL || rlen == 0) { - offset = of_read_addr(addr, na); - memset(addr, 0, pna * 4); - goto finish; + u32 result[OF_MAX_ADDR_CELLS]; + int i; + + memset(result, 0, pna * 4); + for (i = 0; i < na; i++) + result[pna - 1 - i] = + addr[na - 1 - i]; + + memcpy(addr, result, pna * 4); + return 0; } /* Now walk through the ranges */ rlen /= 4; rone = na + pna + ns; for (; rlen >= rone; rlen -= rone, ranges += rone) { - offset = bus->map(addr, ranges, na, ns, pna); - if (offset != OF_BAD_ADDR) - break; + if (!bus->map(addr, ranges, na, ns, pna)) + return 0; } - if (offset == OF_BAD_ADDR) - return 1; - memcpy(addr, ranges + na, 4 * pna); - -finish: - /* Translate it into parent bus space */ - return pbus->translate(addr, offset, pna); + return 1; } +static int of_resource_verbose; + static void __init build_device_resources(struct of_device *op, struct device *parent) { @@ -497,7 +529,8 @@ static void __init build_device_resources(struct of_device *op, pbus = of_match_bus(pp); pbus->count_cells(dp, &pna, &pns); - if (build_one_resource(dp, bus, pbus, addr, dna, dns, pna)) + if (build_one_resource(dp, bus, pbus, addr, + dna, dns, pna)) break; dna = pna; @@ -507,6 +540,12 @@ static void __init build_device_resources(struct of_device *op, build_res: memset(r, 0, sizeof(*r)); + + if (of_resource_verbose) + printk("%s reg[%d] -> %llx\n", + op->node->full_name, index, + result); + if (result != OF_BAD_ADDR) { r->start = result & 0xffffffff; r->end = result + size - 1; @@ -643,6 +682,18 @@ static int __init of_bus_driver_init(void) postcore_initcall(of_bus_driver_init); +static int __init of_debug(char *str) +{ + int val = 0; + + get_option(&str, &val); + if (val & 1) + of_resource_verbose = 1; + return 1; +} + +__setup("of_debug=", of_debug); + int of_register_driver(struct of_platform_driver *drv, struct bus_type *bus) { /* initialize common driver fields */ @@ -695,9 +746,11 @@ int of_device_register(struct of_device *ofdev) if (rc) return rc; - device_create_file(&ofdev->dev, &dev_attr_devspec); + rc = device_create_file(&ofdev->dev, &dev_attr_devspec); + if (rc) + device_unregister(&ofdev->dev); - return 0; + return rc; } void of_device_unregister(struct of_device *ofdev) diff --git a/arch/sparc64/defconfig b/arch/sparc64/defconfig index b2f41147d0e..38353621069 100644 --- a/arch/sparc64/defconfig +++ b/arch/sparc64/defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.17 -# Fri Jun 23 23:17:09 2006 +# Linux kernel version: 2.6.18-rc1 +# Wed Jul 12 14:00:58 2006 # CONFIG_SPARC=y CONFIG_SPARC64=y @@ -18,6 +18,7 @@ CONFIG_SECCOMP=y CONFIG_HZ_250=y # CONFIG_HZ_1000 is not set CONFIG_HZ=250 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # # Code maturity level options @@ -51,10 +52,12 @@ CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y +CONFIG_RT_MUTEXES=y CONFIG_FUTEX=y CONFIG_EPOLL=y CONFIG_SHMEM=y CONFIG_SLAB=y +CONFIG_VM_EVENT_COUNTERS=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 # CONFIG_SLOB is not set @@ -127,8 +130,8 @@ CONFIG_SPARSEMEM=y CONFIG_HAVE_MEMORY_PRESENT=y # CONFIG_SPARSEMEM_STATIC is not set CONFIG_SPARSEMEM_EXTREME=y -CONFIG_MEMORY_HOTPLUG=y CONFIG_SPLIT_PTLOCK_CPUS=4 +CONFIG_RESOURCES_64BIT=y CONFIG_GENERIC_ISA_DMA=y CONFIG_SBUS=y CONFIG_SBUSCHAR=y @@ -203,7 +206,6 @@ CONFIG_TCP_CONG_VEGAS=m CONFIG_TCP_CONG_SCALABLE=m CONFIG_TCP_CONG_LP=m CONFIG_TCP_CONG_VENO=m -CONFIG_TCP_CONG_COMPOUND=m CONFIG_IPV6=m CONFIG_IPV6_PRIVACY=y CONFIG_IPV6_ROUTER_PREF=y @@ -461,9 +463,8 @@ CONFIG_MD_LINEAR=m CONFIG_MD_RAID0=m CONFIG_MD_RAID1=m CONFIG_MD_RAID10=m -CONFIG_MD_RAID5=m +CONFIG_MD_RAID456=m # CONFIG_MD_RAID5_RESHAPE is not set -CONFIG_MD_RAID6=m CONFIG_MD_MULTIPATH=m # CONFIG_MD_FAULTY is not set CONFIG_BLK_DEV_DM=m @@ -663,6 +664,7 @@ CONFIG_SERIO_RAW=m CONFIG_VT=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set # CONFIG_SERIAL_NONSTANDARD is not set # @@ -693,6 +695,7 @@ CONFIG_UNIX98_PTYS=y # Watchdog Cards # # CONFIG_WATCHDOG is not set +# CONFIG_HW_RANDOM is not set CONFIG_RTC=y # CONFIG_DTLK is not set # CONFIG_R3964 is not set @@ -839,12 +842,13 @@ CONFIG_VIDEO_V4L2=y # # Graphics support # +# CONFIG_FIRMWARE_EDID is not set CONFIG_FB=y CONFIG_FB_CFB_FILLRECT=y CONFIG_FB_CFB_COPYAREA=y CONFIG_FB_CFB_IMAGEBLIT=y # CONFIG_FB_MACMODES is not set -# CONFIG_FB_FIRMWARE_EDID is not set +# CONFIG_FB_BACKLIGHT is not set CONFIG_FB_MODE_HELPERS=y CONFIG_FB_TILEBLITTING=y # CONFIG_FB_CIRRUS is not set @@ -954,6 +958,18 @@ CONFIG_SND_ALI5451=m # CONFIG_SND_CMIPCI is not set # CONFIG_SND_CS4281 is not set # CONFIG_SND_CS46XX is not set +# CONFIG_SND_DARLA20 is not set +# CONFIG_SND_GINA20 is not set +# CONFIG_SND_LAYLA20 is not set +# CONFIG_SND_DARLA24 is not set +# CONFIG_SND_GINA24 is not set +# CONFIG_SND_LAYLA24 is not set +# CONFIG_SND_MONA is not set +# CONFIG_SND_MIA is not set +# CONFIG_SND_ECHO3G is not set +# CONFIG_SND_INDIGO is not set +# CONFIG_SND_INDIGOIO is not set +# CONFIG_SND_INDIGODJ is not set # CONFIG_SND_EMU10K1 is not set # CONFIG_SND_EMU10K1X is not set # CONFIG_SND_ENS1370 is not set @@ -1263,6 +1279,7 @@ CONFIG_RAMFS=y # CONFIG_NFSD is not set # CONFIG_SMB_FS is not set # CONFIG_CIFS is not set +# CONFIG_CIFS_DEBUG2 is not set # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set @@ -1331,14 +1348,19 @@ CONFIG_KPROBES=y # CONFIG_PRINTK_TIME=y CONFIG_MAGIC_SYSRQ=y +# CONFIG_UNUSED_SYMBOLS is not set CONFIG_DEBUG_KERNEL=y CONFIG_LOG_BUF_SHIFT=18 CONFIG_DETECT_SOFTLOCKUP=y CONFIG_SCHEDSTATS=y # CONFIG_DEBUG_SLAB is not set -# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_RWSEMS is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set # CONFIG_DEBUG_KOBJECT is not set CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_INFO is not set @@ -1402,3 +1424,4 @@ CONFIG_CRC32=y CONFIG_LIBCRC32C=m CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=y +CONFIG_PLIST=y diff --git a/arch/sparc64/kernel/of_device.c b/arch/sparc64/kernel/of_device.c index 169b017eec0..7064cee290a 100644 --- a/arch/sparc64/kernel/of_device.c +++ b/arch/sparc64/kernel/of_device.c @@ -210,7 +210,7 @@ struct bus_type of_bus_type = { }; EXPORT_SYMBOL(of_bus_type); -static inline u64 of_read_addr(u32 *cell, int size) +static inline u64 of_read_addr(const u32 *cell, int size) { u64 r = 0; while (size--) @@ -236,8 +236,8 @@ struct of_bus { int (*match)(struct device_node *parent); void (*count_cells)(struct device_node *child, int *addrc, int *sizec); - u64 (*map)(u32 *addr, u32 *range, int na, int ns, int pna); - int (*translate)(u32 *addr, u64 offset, int na); + int (*map)(u32 *addr, const u32 *range, + int na, int ns, int pna); unsigned int (*get_flags)(u32 *addr); }; @@ -251,27 +251,49 @@ static void of_bus_default_count_cells(struct device_node *dev, get_cells(dev, addrc, sizec); } -static u64 of_bus_default_map(u32 *addr, u32 *range, int na, int ns, int pna) +/* Make sure the least significant 64-bits are in-range. Even + * for 3 or 4 cell values it is a good enough approximation. + */ +static int of_out_of_range(const u32 *addr, const u32 *base, + const u32 *size, int na, int ns) { - u64 cp, s, da; + u64 a = of_read_addr(addr, na); + u64 b = of_read_addr(base, na); - cp = of_read_addr(range, na); - s = of_read_addr(range + na + pna, ns); - da = of_read_addr(addr, na); + if (a < b) + return 1; - if (da < cp || da >= (cp + s)) - return OF_BAD_ADDR; - return da - cp; + b += of_read_addr(size, ns); + if (a >= b) + return 1; + + return 0; } -static int of_bus_default_translate(u32 *addr, u64 offset, int na) +static int of_bus_default_map(u32 *addr, const u32 *range, + int na, int ns, int pna) { - u64 a = of_read_addr(addr, na); - memset(addr, 0, na * 4); - a += offset; - if (na > 1) - addr[na - 2] = a >> 32; - addr[na - 1] = a & 0xffffffffu; + u32 result[OF_MAX_ADDR_CELLS]; + int i; + + if (ns > 2) { + printk("of_device: Cannot handle size cells (%d) > 2.", ns); + return -EINVAL; + } + + if (of_out_of_range(addr, range, range + na + pna, na, ns)) + return -EINVAL; + + /* Start with the parent range base. */ + memcpy(result, range + na, pna * 4); + + /* Add in the child address offset. */ + for (i = 0; i < na; i++) + result[pna - 1 - i] += + (addr[na - 1 - i] - + range[na - 1 - i]); + + memcpy(addr, result, pna * 4); return 0; } @@ -287,7 +309,20 @@ static unsigned int of_bus_default_get_flags(u32 *addr) static int of_bus_pci_match(struct device_node *np) { - return !strcmp(np->type, "pci") || !strcmp(np->type, "pciex"); + if (!strcmp(np->type, "pci") || !strcmp(np->type, "pciex")) { + /* Do not do PCI specific frobbing if the + * PCI bridge lacks a ranges property. We + * want to pass it through up to the next + * parent as-is, not with the PCI translate + * method which chops off the top address cell. + */ + if (!of_find_property(np, "ranges", NULL)) + return 0; + + return 1; + } + + return 0; } static void of_bus_pci_count_cells(struct device_node *np, @@ -299,27 +334,32 @@ static void of_bus_pci_count_cells(struct device_node *np, *sizec = 2; } -static u64 of_bus_pci_map(u32 *addr, u32 *range, int na, int ns, int pna) +static int of_bus_pci_map(u32 *addr, const u32 *range, + int na, int ns, int pna) { - u64 cp, s, da; + u32 result[OF_MAX_ADDR_CELLS]; + int i; /* Check address type match */ if ((addr[0] ^ range[0]) & 0x03000000) - return OF_BAD_ADDR; + return -EINVAL; - /* Read address values, skipping high cell */ - cp = of_read_addr(range + 1, na - 1); - s = of_read_addr(range + na + pna, ns); - da = of_read_addr(addr + 1, na - 1); + if (of_out_of_range(addr + 1, range + 1, range + na + pna, + na - 1, ns)) + return -EINVAL; - if (da < cp || da >= (cp + s)) - return OF_BAD_ADDR; - return da - cp; -} + /* Start with the parent range base. */ + memcpy(result, range + na, pna * 4); -static int of_bus_pci_translate(u32 *addr, u64 offset, int na) -{ - return of_bus_default_translate(addr + 1, offset, na - 1); + /* Add in the child address offset, skipping high cell. */ + for (i = 0; i < na - 1; i++) + result[pna - 1 - i] += + (addr[na - 1 - i] - + range[na - 1 - i]); + + memcpy(addr, result, pna * 4); + + return 0; } static unsigned int of_bus_pci_get_flags(u32 *addr) @@ -340,59 +380,6 @@ static unsigned int of_bus_pci_get_flags(u32 *addr) } /* - * ISA bus specific translator - */ - -static int of_bus_isa_match(struct device_node *np) -{ - return !strcmp(np->name, "isa"); -} - -static void of_bus_isa_count_cells(struct device_node *child, - int *addrc, int *sizec) -{ - if (addrc) - *addrc = 2; - if (sizec) - *sizec = 1; -} - -static u64 of_bus_isa_map(u32 *addr, u32 *range, int na, int ns, int pna) -{ - u64 cp, s, da; - - /* Check address type match */ - if ((addr[0] ^ range[0]) & 0x00000001) - return OF_BAD_ADDR; - - /* Read address values, skipping high cell */ - cp = of_read_addr(range + 1, na - 1); - s = of_read_addr(range + na + pna, ns); - da = of_read_addr(addr + 1, na - 1); - - if (da < cp || da >= (cp + s)) - return OF_BAD_ADDR; - return da - cp; -} - -static int of_bus_isa_translate(u32 *addr, u64 offset, int na) -{ - return of_bus_default_translate(addr + 1, offset, na - 1); -} - -static unsigned int of_bus_isa_get_flags(u32 *addr) -{ - unsigned int flags = 0; - u32 w = addr[0]; - - if (w & 1) - flags |= IORESOURCE_IO; - else - flags |= IORESOURCE_MEM; - return flags; -} - -/* * SBUS bus specific translator */ @@ -411,16 +398,11 @@ static void of_bus_sbus_count_cells(struct device_node *child, *sizec = 1; } -static u64 of_bus_sbus_map(u32 *addr, u32 *range, int na, int ns, int pna) +static int of_bus_sbus_map(u32 *addr, const u32 *range, int na, int ns, int pna) { return of_bus_default_map(addr, range, na, ns, pna); } -static int of_bus_sbus_translate(u32 *addr, u64 offset, int na) -{ - return of_bus_default_translate(addr, offset, na); -} - static unsigned int of_bus_sbus_get_flags(u32 *addr) { return IORESOURCE_MEM; @@ -439,19 +421,8 @@ static struct of_bus of_busses[] = { .match = of_bus_pci_match, .count_cells = of_bus_pci_count_cells, .map = of_bus_pci_map, - .translate = of_bus_pci_translate, .get_flags = of_bus_pci_get_flags, }, - /* ISA */ - { - .name = "isa", - .addr_prop_name = "reg", - .match = of_bus_isa_match, - .count_cells = of_bus_isa_count_cells, - .map = of_bus_isa_map, - .translate = of_bus_isa_translate, - .get_flags = of_bus_isa_get_flags, - }, /* SBUS */ { .name = "sbus", @@ -459,7 +430,6 @@ static struct of_bus of_busses[] = { .match = of_bus_sbus_match, .count_cells = of_bus_sbus_count_cells, .map = of_bus_sbus_map, - .translate = of_bus_sbus_translate, .get_flags = of_bus_sbus_get_flags, }, /* Default */ @@ -469,7 +439,6 @@ static struct of_bus of_busses[] = { .match = NULL, .count_cells = of_bus_default_count_cells, .map = of_bus_default_map, - .translate = of_bus_default_translate, .get_flags = of_bus_default_get_flags, }, }; @@ -494,33 +463,62 @@ static int __init build_one_resource(struct device_node *parent, u32 *ranges; unsigned int rlen; int rone; - u64 offset = OF_BAD_ADDR; ranges = of_get_property(parent, "ranges", &rlen); if (ranges == NULL || rlen == 0) { - offset = of_read_addr(addr, na); - memset(addr, 0, pna * 4); - goto finish; + u32 result[OF_MAX_ADDR_CELLS]; + int i; + + memset(result, 0, pna * 4); + for (i = 0; i < na; i++) + result[pna - 1 - i] = + addr[na - 1 - i]; + + memcpy(addr, result, pna * 4); + return 0; } /* Now walk through the ranges */ rlen /= 4; rone = na + pna + ns; for (; rlen >= rone; rlen -= rone, ranges += rone) { - offset = bus->map(addr, ranges, na, ns, pna); - if (offset != OF_BAD_ADDR) - break; + if (!bus->map(addr, ranges, na, ns, pna)) + return 0; } - if (offset == OF_BAD_ADDR) + + return 1; +} + +static int __init use_1to1_mapping(struct device_node *pp) +{ + char *model; + + /* If this is on the PMU bus, don't try to translate it even + * if a ranges property exists. + */ + if (!strcmp(pp->name, "pmu")) return 1; - memcpy(addr, ranges + na, 4 * pna); + /* If we have a ranges property in the parent, use it. */ + if (of_find_property(pp, "ranges", NULL) != NULL) + return 0; + + /* If the parent is the dma node of an ISA bus, pass + * the translation up to the root. + */ + if (!strcmp(pp->name, "dma")) + return 0; + + /* Similarly for Simba PCI bridges. */ + model = of_get_property(pp, "model", NULL); + if (model && !strcmp(model, "SUNW,simba")) + return 0; -finish: - /* Translate it into parent bus space */ - return pbus->translate(addr, offset, pna); + return 1; } +static int of_resource_verbose; + static void __init build_device_resources(struct of_device *op, struct device *parent) { @@ -564,15 +562,7 @@ static void __init build_device_resources(struct of_device *op, memcpy(addr, reg, na * 4); - /* If the immediate parent has no ranges property to apply, - * just use a 1<->1 mapping. Unless it is the 'dma' child - * of an isa bus, which must be passed up towards the root. - * - * Also, don't try to translate PMU bus device registers. - */ - if ((of_find_property(pp, "ranges", NULL) == NULL && - strcmp(pp->name, "dma") != 0) || - !strcmp(pp->name, "pmu")) { + if (use_1to1_mapping(pp)) { result = of_read_addr(addr, na); goto build_res; } @@ -591,7 +581,8 @@ static void __init build_device_resources(struct of_device *op, pbus = of_match_bus(pp); pbus->count_cells(dp, &pna, &pns); - if (build_one_resource(dp, bus, pbus, addr, dna, dns, pna)) + if (build_one_resource(dp, bus, pbus, addr, + dna, dns, pna)) break; dna = pna; @@ -601,6 +592,12 @@ static void __init build_device_resources(struct of_device *op, build_res: memset(r, 0, sizeof(*r)); + + if (of_resource_verbose) + printk("%s reg[%d] -> %lx\n", + op->node->full_name, index, + result); + if (result != OF_BAD_ADDR) { if (tlb_type == hypervisor) result &= 0x0fffffffffffffffUL; @@ -684,6 +681,8 @@ static unsigned int __init pci_irq_swizzle(struct device_node *dp, return ret; } +static int of_irq_verbose; + static unsigned int __init build_one_device_irq(struct of_device *op, struct device *parent, unsigned int irq) @@ -698,10 +697,11 @@ static unsigned int __init build_one_device_irq(struct of_device *op, if (dp->irq_trans) { irq = dp->irq_trans->irq_build(dp, irq, dp->irq_trans->data); -#if 1 - printk("%s: direct translate %x --> %x\n", - dp->full_name, orig_irq, irq); -#endif + + if (of_irq_verbose) + printk("%s: direct translate %x --> %x\n", + dp->full_name, orig_irq, irq); + return irq; } @@ -728,12 +728,13 @@ static unsigned int __init build_one_device_irq(struct of_device *op, iret = apply_interrupt_map(dp, pp, imap, imlen, imsk, &irq); -#if 1 - printk("%s: Apply [%s:%x] imap --> [%s:%x]\n", - op->node->full_name, - pp->full_name, this_orig_irq, - (iret ? iret->full_name : "NULL"), irq); -#endif + + if (of_irq_verbose) + printk("%s: Apply [%s:%x] imap --> [%s:%x]\n", + op->node->full_name, + pp->full_name, this_orig_irq, + (iret ? iret->full_name : "NULL"), irq); + if (!iret) break; @@ -747,11 +748,13 @@ static unsigned int __init build_one_device_irq(struct of_device *op, unsigned int this_orig_irq = irq; irq = pci_irq_swizzle(dp, pp, irq); -#if 1 - printk("%s: PCI swizzle [%s] %x --> %x\n", - op->node->full_name, - pp->full_name, this_orig_irq, irq); -#endif + if (of_irq_verbose) + printk("%s: PCI swizzle [%s] " + "%x --> %x\n", + op->node->full_name, + pp->full_name, this_orig_irq, + irq); + } if (pp->irq_trans) { @@ -767,10 +770,9 @@ static unsigned int __init build_one_device_irq(struct of_device *op, irq = ip->irq_trans->irq_build(op->node, irq, ip->irq_trans->data); -#if 1 - printk("%s: Apply IRQ trans [%s] %x --> %x\n", - op->node->full_name, ip->full_name, orig_irq, irq); -#endif + if (of_irq_verbose) + printk("%s: Apply IRQ trans [%s] %x --> %x\n", + op->node->full_name, ip->full_name, orig_irq, irq); return irq; } @@ -870,6 +872,20 @@ static int __init of_bus_driver_init(void) postcore_initcall(of_bus_driver_init); +static int __init of_debug(char *str) +{ + int val = 0; + + get_option(&str, &val); + if (val & 1) + of_resource_verbose = 1; + if (val & 2) + of_irq_verbose = 1; + return 1; +} + +__setup("of_debug=", of_debug); + int of_register_driver(struct of_platform_driver *drv, struct bus_type *bus) { /* initialize common driver fields */ @@ -922,9 +938,11 @@ int of_device_register(struct of_device *ofdev) if (rc) return rc; - device_create_file(&ofdev->dev, &dev_attr_devspec); + rc = device_create_file(&ofdev->dev, &dev_attr_devspec); + if (rc) + device_unregister(&ofdev->dev); - return 0; + return rc; } void of_device_unregister(struct of_device *ofdev) diff --git a/arch/sparc64/kernel/prom.c b/arch/sparc64/kernel/prom.c index 99daeee4209..c86007a2aa3 100644 --- a/arch/sparc64/kernel/prom.c +++ b/arch/sparc64/kernel/prom.c @@ -539,6 +539,45 @@ static unsigned long __sabre_onboard_imap_off[] = { ((ino & 0x20) ? (SABRE_ICLR_SCSI + (((ino) & 0x1f) << 3)) : \ (SABRE_ICLR_A_SLOT0 + (((ino) & 0x1f)<<3))) +static int sabre_device_needs_wsync(struct device_node *dp) +{ + struct device_node *parent = dp->parent; + char *parent_model, *parent_compat; + + /* This traversal up towards the root is meant to + * handle two cases: + * + * 1) non-PCI bus sitting under PCI, such as 'ebus' + * 2) the PCI controller interrupts themselves, which + * will use the sabre_irq_build but do not need + * the DMA synchronization handling + */ + while (parent) { + if (!strcmp(parent->type, "pci")) + break; + parent = parent->parent; + } + + if (!parent) + return 0; + + parent_model = of_get_property(parent, + "model", NULL); + if (parent_model && + (!strcmp(parent_model, "SUNW,sabre") || + !strcmp(parent_model, "SUNW,simba"))) + return 0; + + parent_compat = of_get_property(parent, + "compatible", NULL); + if (parent_compat && + (!strcmp(parent_compat, "pci108e,a000") || + !strcmp(parent_compat, "pci108e,a001"))) + return 0; + + return 1; +} + static unsigned int sabre_irq_build(struct device_node *dp, unsigned int ino, void *_data) @@ -577,15 +616,17 @@ static unsigned int sabre_irq_build(struct device_node *dp, virt_irq = build_irq(inofixup, iclr, imap); + /* If the parent device is a PCI<->PCI bridge other than + * APB, we have to install a pre-handler to ensure that + * all pending DMA is drained before the interrupt handler + * is run. + */ regs = of_get_property(dp, "reg", NULL); - if (regs && - ((regs->phys_hi >> 16) & 0xff) != irq_data->pci_first_busno) { + if (regs && sabre_device_needs_wsync(dp)) { irq_install_pre_handler(virt_irq, sabre_wsync_handler, (void *) (long) regs->phys_hi, - (void *) - controller_regs + - SABRE_WRSYNC); + (void *) irq_data); } return virt_irq; diff --git a/drivers/mfd/ucb1x00-core.c b/drivers/mfd/ucb1x00-core.c index 632bc218c86..2bf32721eb5 100644 --- a/drivers/mfd/ucb1x00-core.c +++ b/drivers/mfd/ucb1x00-core.c @@ -479,7 +479,7 @@ static int ucb1x00_probe(struct mcp *mcp) mcp_enable(mcp); id = mcp_reg_read(mcp, UCB_ID); - if (id != UCB_ID_1200 && id != UCB_ID_1300) { + if (id != UCB_ID_1200 && id != UCB_ID_1300 && id != UCB_ID_TC35143) { printk(KERN_WARNING "UCB1x00 ID not found: %04x\n", id); goto err_disable; } diff --git a/drivers/mfd/ucb1x00.h b/drivers/mfd/ucb1x00.h index 9c9a647d8b7..ca8df8072d4 100644 --- a/drivers/mfd/ucb1x00.h +++ b/drivers/mfd/ucb1x00.h @@ -94,6 +94,7 @@ #define UCB_ID 0x0c #define UCB_ID_1200 0x1004 #define UCB_ID_1300 0x1005 +#define UCB_ID_TC35143 0x9712 #define UCB_MODE 0x0d #define UCB_MODE_DYN_VFLAG_ENA (1 << 12) diff --git a/drivers/serial/8250.c b/drivers/serial/8250.c index 0995430e4cf..0ae9ced00ed 100644 --- a/drivers/serial/8250.c +++ b/drivers/serial/8250.c @@ -299,6 +299,7 @@ static inline int map_8250_out_reg(struct uart_8250_port *up, int offset) static unsigned int serial_in(struct uart_8250_port *up, int offset) { + unsigned int tmp; offset = map_8250_in_reg(up, offset) << up->port.regshift; switch (up->port.iotype) { @@ -317,6 +318,13 @@ static unsigned int serial_in(struct uart_8250_port *up, int offset) return __raw_readl(up->port.membase + offset); #endif + case UPIO_TSI: + if (offset == UART_IIR) { + tmp = readl((u32 *)(up->port.membase + UART_RX)); + return (cpu_to_le32(tmp) >> 8) & 0xff; + } else + return readb(up->port.membase + offset); + default: return inb(up->port.iobase + offset); } @@ -346,6 +354,10 @@ serial_out(struct uart_8250_port *up, int offset, int value) __raw_writel(value, up->port.membase + offset); break; #endif + case UPIO_TSI: + if (!((offset == UART_IER) && (value & UART_IER_UUE))) + writeb(value, up->port.membase + offset); + break; default: outb(value, up->port.iobase + offset); @@ -2240,10 +2252,14 @@ serial8250_console_write(struct console *co, const char *s, unsigned int count) touch_nmi_watchdog(); - if (oops_in_progress) { - locked = spin_trylock_irqsave(&up->port.lock, flags); + local_irq_save(flags); + if (up->port.sysrq) { + /* serial8250_handle_port() already took the lock */ + locked = 0; + } else if (oops_in_progress) { + locked = spin_trylock(&up->port.lock); } else - spin_lock_irqsave(&up->port.lock, flags); + spin_lock(&up->port.lock); /* * First save the IER then disable the interrupts @@ -2265,7 +2281,8 @@ serial8250_console_write(struct console *co, const char *s, unsigned int count) serial_out(up, UART_IER, ier); if (locked) - spin_unlock_irqrestore(&up->port.lock, flags); + spin_unlock(&up->port.lock); + local_irq_restore(flags); } static int serial8250_console_setup(struct console *co, char *options) diff --git a/drivers/serial/dz.c b/drivers/serial/dz.c index d119c8296a7..8a98aae80e2 100644 --- a/drivers/serial/dz.c +++ b/drivers/serial/dz.c @@ -673,7 +673,7 @@ static void dz_reset(struct dz_port *dport) } #ifdef CONFIG_SERIAL_DZ_CONSOLE -static void dz_console_putchar(struct uart_port *port, int ch) +static void dz_console_putchar(struct uart_port *uport, int ch) { struct dz_port *dport = (struct dz_port *)uport; unsigned long flags; diff --git a/drivers/serial/ip22zilog.c b/drivers/serial/ip22zilog.c index 342042889f6..5ff269fb604 100644 --- a/drivers/serial/ip22zilog.c +++ b/drivers/serial/ip22zilog.c @@ -1143,9 +1143,8 @@ static void __init ip22zilog_prepare(void) up[(chip * 2) + 1].port.fifosize = 1; up[(chip * 2) + 1].port.ops = &ip22zilog_pops; up[(chip * 2) + 1].port.type = PORT_IP22ZILOG; - up[(chip * 2) + 1].port.flags |= IP22ZILOG_FLAG_IS_CHANNEL_A; up[(chip * 2) + 1].port.line = (chip * 2) + 1; - up[(chip * 2) + 1].flags = 0; + up[(chip * 2) + 1].flags |= IP22ZILOG_FLAG_IS_CHANNEL_A; } } diff --git a/drivers/serial/serial_core.c b/drivers/serial/serial_core.c index d5f636fbf29..80ef7d48275 100644 --- a/drivers/serial/serial_core.c +++ b/drivers/serial/serial_core.c @@ -2036,6 +2036,7 @@ uart_report_port(struct uart_driver *drv, struct uart_port *port) case UPIO_MEM: case UPIO_MEM32: case UPIO_AU: + case UPIO_TSI: snprintf(address, sizeof(address), "MMIO 0x%lx", port->mapbase); break; diff --git a/drivers/serial/sunsu.c b/drivers/serial/sunsu.c index f9013baba05..93bdaa3169f 100644 --- a/drivers/serial/sunsu.c +++ b/drivers/serial/sunsu.c @@ -1406,25 +1406,35 @@ static int __devinit su_probe(struct of_device *op, const struct of_device_id *m struct device_node *dp = op->node; struct uart_sunsu_port *up; struct resource *rp; + enum su_type type; int err; - if (inst >= UART_NR) - return -EINVAL; + type = su_get_type(dp); + if (type == SU_PORT_PORT) { + if (inst >= UART_NR) + return -EINVAL; + up = &sunsu_ports[inst]; + } else { + up = kzalloc(sizeof(*up), GFP_KERNEL); + if (!up) + return -ENOMEM; + } - up = &sunsu_ports[inst]; up->port.line = inst; spin_lock_init(&up->port.lock); - up->su_type = su_get_type(dp); + up->su_type = type; rp = &op->resource[0]; - up->port.mapbase = op->resource[0].start; - + up->port.mapbase = rp->start; up->reg_size = (rp->end - rp->start) + 1; up->port.membase = of_ioremap(rp, 0, up->reg_size, "su"); - if (!up->port.membase) + if (!up->port.membase) { + if (type != SU_PORT_PORT) + kfree(up); return -ENOMEM; + } up->port.irq = op->irqs[0]; @@ -1436,8 +1446,11 @@ static int __devinit su_probe(struct of_device *op, const struct of_device_id *m err = 0; if (up->su_type == SU_PORT_KBD || up->su_type == SU_PORT_MS) { err = sunsu_kbd_ms_init(up); - if (err) + if (err) { + kfree(up); goto out_unmap; + } + dev_set_drvdata(&op->dev, up); return 0; } @@ -1476,8 +1489,12 @@ static int __devexit su_remove(struct of_device *dev) #ifdef CONFIG_SERIO serio_unregister_port(&up->serio); #endif - } else if (up->port.type != PORT_UNKNOWN) + kfree(up); + } else if (up->port.type != PORT_UNKNOWN) { uart_remove_one_port(&sunsu_reg, &up->port); + } + + dev_set_drvdata(&dev->dev, NULL); return 0; } diff --git a/include/asm-arm/arch-versatile/platform.h b/include/asm-arm/arch-versatile/platform.h index 72ef874567d..2af9d7c9c63 100644 --- a/include/asm-arm/arch-versatile/platform.h +++ b/include/asm-arm/arch-versatile/platform.h @@ -65,6 +65,8 @@ #define VERSATILE_SYS_OSC1_OFFSET 0x1C #endif +#define VERSATILE_SYS_OSCCLCD_OFFSET 0x1c + #define VERSATILE_SYS_LOCK_OFFSET 0x20 #define VERSATILE_SYS_100HZ_OFFSET 0x24 #define VERSATILE_SYS_CFGDATA1_OFFSET 0x28 diff --git a/include/asm-i386/system.h b/include/asm-i386/system.h index db398d88b1d..2db168ef949 100644 --- a/include/asm-i386/system.h +++ b/include/asm-i386/system.h @@ -82,10 +82,6 @@ __asm__ __volatile__ ("movw %%dx,%1\n\t" \ #define savesegment(seg, value) \ asm volatile("mov %%" #seg ",%0":"=rm" (value)) -/* - * Clear and set 'TS' bit respectively - */ -#define clts() __asm__ __volatile__ ("clts") #define read_cr0() ({ \ unsigned int __dummy; \ __asm__ __volatile__( \ @@ -94,7 +90,7 @@ __asm__ __volatile__ ("movw %%dx,%1\n\t" \ __dummy; \ }) #define write_cr0(x) \ - __asm__ __volatile__("movl %0,%%cr0": :"r" (x)); + __asm__ __volatile__("movl %0,%%cr0": :"r" (x)) #define read_cr2() ({ \ unsigned int __dummy; \ @@ -104,7 +100,7 @@ __asm__ __volatile__ ("movw %%dx,%1\n\t" \ __dummy; \ }) #define write_cr2(x) \ - __asm__ __volatile__("movl %0,%%cr2": :"r" (x)); + __asm__ __volatile__("movl %0,%%cr2": :"r" (x)) #define read_cr3() ({ \ unsigned int __dummy; \ @@ -114,7 +110,7 @@ __asm__ __volatile__ ("movw %%dx,%1\n\t" \ __dummy; \ }) #define write_cr3(x) \ - __asm__ __volatile__("movl %0,%%cr3": :"r" (x)); + __asm__ __volatile__("movl %0,%%cr3": :"r" (x)) #define read_cr4() ({ \ unsigned int __dummy; \ @@ -123,7 +119,6 @@ __asm__ __volatile__ ("movw %%dx,%1\n\t" \ :"=r" (__dummy)); \ __dummy; \ }) - #define read_cr4_safe() ({ \ unsigned int __dummy; \ /* This could fault if %cr4 does not exist */ \ @@ -135,15 +130,19 @@ __asm__ __volatile__ ("movw %%dx,%1\n\t" \ : "=r" (__dummy): "0" (0)); \ __dummy; \ }) - #define write_cr4(x) \ - __asm__ __volatile__("movl %0,%%cr4": :"r" (x)); + __asm__ __volatile__("movl %0,%%cr4": :"r" (x)) + +/* + * Clear and set 'TS' bit respectively + */ +#define clts() __asm__ __volatile__ ("clts") #define stts() write_cr0(8 | read_cr0()) #endif /* __KERNEL__ */ #define wbinvd() \ - __asm__ __volatile__ ("wbinvd": : :"memory"); + __asm__ __volatile__ ("wbinvd": : :"memory") static inline unsigned long get_limit(unsigned long segment) { diff --git a/include/asm-m68knommu/uaccess.h b/include/asm-m68knommu/uaccess.h index 05be9515a2d..62b29b10bc6 100644 --- a/include/asm-m68knommu/uaccess.h +++ b/include/asm-m68knommu/uaccess.h @@ -93,7 +93,7 @@ extern int __put_user_bad(void); #define get_user(x, ptr) \ ({ \ int __gu_err = 0; \ - typeof(*(ptr)) __gu_val = 0; \ + typeof(x) __gu_val = 0; \ switch (sizeof(*(ptr))) { \ case 1: \ __get_user_asm(__gu_err, __gu_val, ptr, b, "=d"); \ @@ -105,23 +105,23 @@ extern int __put_user_bad(void); __get_user_asm(__gu_err, __gu_val, ptr, l, "=r"); \ break; \ case 8: \ - memcpy(&__gu_val, ptr, sizeof (*(ptr))); \ + memcpy((void *) &__gu_val, ptr, sizeof (*(ptr))); \ break; \ default: \ __gu_val = 0; \ __gu_err = __get_user_bad(); \ break; \ } \ - (x) = __gu_val; \ + (x) = (typeof(*(ptr))) __gu_val; \ __gu_err; \ }) #define __get_user(x, ptr) get_user(x, ptr) extern int __get_user_bad(void); -#define __get_user_asm(err,x,ptr,bwl,reg) \ - __asm__ ("move" #bwl " %1,%0" \ - : "=d" (x) \ +#define __get_user_asm(err,x,ptr,bwl,reg) \ + __asm__ ("move" #bwl " %1,%0" \ + : "=d" (x) \ : "m" (*__ptr(ptr))) #define copy_from_user(to, from, n) (memcpy(to, from, n), 0) diff --git a/include/asm-sparc64/Kbuild b/include/asm-sparc64/Kbuild index c78d44bb195..9284c3cb27e 100644 --- a/include/asm-sparc64/Kbuild +++ b/include/asm-sparc64/Kbuild @@ -4,7 +4,7 @@ ALTARCH := sparc ARCHDEF := defined __sparc__ && defined __arch64__ ALTARCHDEF := defined __sparc__ && !defined __arch64__ -unifdef-y := fbio.h perfctr.h +unifdef-y += fbio.h perfctr.h header-y += apb.h asi.h bbc.h bpp.h display7seg.h envctrl.h floppy.h \ ipc.h kdebug.h mostek.h openprom.h openpromio.h parport.h \ pconf.h psrcompat.h pstate.h reg.h uctx.h utrap.h watchdog.h diff --git a/include/linux/root_dev.h b/include/linux/root_dev.h index ea4bc9d1373..ed241aad7c1 100644 --- a/include/linux/root_dev.h +++ b/include/linux/root_dev.h @@ -2,6 +2,8 @@ #define _ROOT_DEV_H_ #include <linux/major.h> +#include <linux/types.h> +#include <linux/kdev_t.h> enum { Root_NFS = MKDEV(UNNAMED_MAJOR, 255), diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h index 058cba70818..86501a3de2a 100644 --- a/include/linux/serial_core.h +++ b/include/linux/serial_core.h @@ -227,6 +227,7 @@ struct uart_port { #define UPIO_MEM (2) #define UPIO_MEM32 (3) #define UPIO_AU (4) /* Au1x00 type IO */ +#define UPIO_TSI (5) /* Tsi108/109 type IO */ unsigned int read_status_mask; /* driver specific */ unsigned int ignore_status_mask; /* driver specific */ diff --git a/mm/slab.c b/mm/slab.c index 85c2e03098a..0f20843beff 100644 --- a/mm/slab.c +++ b/mm/slab.c @@ -674,6 +674,37 @@ static struct kmem_cache cache_cache = { #endif }; +#ifdef CONFIG_LOCKDEP + +/* + * Slab sometimes uses the kmalloc slabs to store the slab headers + * for other slabs "off slab". + * The locking for this is tricky in that it nests within the locks + * of all other slabs in a few places; to deal with this special + * locking we put on-slab caches into a separate lock-class. + */ +static struct lock_class_key on_slab_key; + +static inline void init_lock_keys(struct cache_sizes *s) +{ + int q; + + for (q = 0; q < MAX_NUMNODES; q++) { + if (!s->cs_cachep->nodelists[q] || OFF_SLAB(s->cs_cachep)) + continue; + lockdep_set_class(&s->cs_cachep->nodelists[q]->list_lock, + &on_slab_key); + } +} + +#else +static inline void init_lock_keys(struct cache_sizes *s) +{ +} +#endif + + + /* Guard access to the cache-chain. */ static DEFINE_MUTEX(cache_chain_mutex); static struct list_head cache_chain; @@ -1021,8 +1052,7 @@ static void drain_alien_cache(struct kmem_cache *cachep, } } -static inline int cache_free_alien(struct kmem_cache *cachep, void *objp, - int nesting) +static inline int cache_free_alien(struct kmem_cache *cachep, void *objp) { struct slab *slabp = virt_to_slab(objp); int nodeid = slabp->nodeid; @@ -1040,7 +1070,7 @@ static inline int cache_free_alien(struct kmem_cache *cachep, void *objp, STATS_INC_NODEFREES(cachep); if (l3->alien && l3->alien[nodeid]) { alien = l3->alien[nodeid]; - spin_lock_nested(&alien->lock, nesting); + spin_lock(&alien->lock); if (unlikely(alien->avail == alien->limit)) { STATS_INC_ACOVERFLOW(cachep); __drain_alien_cache(cachep, alien, nodeid); @@ -1069,8 +1099,7 @@ static inline void free_alien_cache(struct array_cache **ac_ptr) { } -static inline int cache_free_alien(struct kmem_cache *cachep, void *objp, - int nesting) +static inline int cache_free_alien(struct kmem_cache *cachep, void *objp) { return 0; } @@ -1393,6 +1422,7 @@ void __init kmem_cache_init(void) ARCH_KMALLOC_FLAGS|SLAB_PANIC, NULL, NULL); } + init_lock_keys(sizes); sizes->cs_dmacachep = kmem_cache_create(names->name_dma, sizes->cs_size, @@ -1760,8 +1790,6 @@ static void slab_destroy_objs(struct kmem_cache *cachep, struct slab *slabp) } #endif -static void __cache_free(struct kmem_cache *cachep, void *objp, int nesting); - /** * slab_destroy - destroy and release all objects in a slab * @cachep: cache pointer being destroyed @@ -1785,17 +1813,8 @@ static void slab_destroy(struct kmem_cache *cachep, struct slab *slabp) call_rcu(&slab_rcu->head, kmem_rcu_free); } else { kmem_freepages(cachep, addr); - if (OFF_SLAB(cachep)) { - unsigned long flags; - - /* - * lockdep: we may nest inside an already held - * ac->lock, so pass in a nesting flag: - */ - local_irq_save(flags); - __cache_free(cachep->slabp_cache, slabp, 1); - local_irq_restore(flags); - } + if (OFF_SLAB(cachep)) + kmem_cache_free(cachep->slabp_cache, slabp); } } @@ -3100,16 +3119,7 @@ static void free_block(struct kmem_cache *cachep, void **objpp, int nr_objects, if (slabp->inuse == 0) { if (l3->free_objects > l3->free_limit) { l3->free_objects -= cachep->num; - /* - * It is safe to drop the lock. The slab is - * no longer linked to the cache. cachep - * cannot disappear - we are using it and - * all destruction of caches must be - * serialized properly by the user. - */ - spin_unlock(&l3->list_lock); slab_destroy(cachep, slabp); - spin_lock(&l3->list_lock); } else { list_add(&slabp->list, &l3->slabs_free); } @@ -3135,7 +3145,7 @@ static void cache_flusharray(struct kmem_cache *cachep, struct array_cache *ac) #endif check_irq_off(); l3 = cachep->nodelists[node]; - spin_lock_nested(&l3->list_lock, SINGLE_DEPTH_NESTING); + spin_lock(&l3->list_lock); if (l3->shared) { struct array_cache *shared_array = l3->shared; int max = shared_array->limit - shared_array->avail; @@ -3178,14 +3188,14 @@ free_done: * Release an obj back to its cache. If the obj has a constructed state, it must * be in this state _before_ it is released. Called with disabled ints. */ -static void __cache_free(struct kmem_cache *cachep, void *objp, int nesting) +static inline void __cache_free(struct kmem_cache *cachep, void *objp) { struct array_cache *ac = cpu_cache_get(cachep); check_irq_off(); objp = cache_free_debugcheck(cachep, objp, __builtin_return_address(0)); - if (cache_free_alien(cachep, objp, nesting)) + if (cache_free_alien(cachep, objp)) return; if (likely(ac->avail < ac->limit)) { @@ -3424,7 +3434,7 @@ void kmem_cache_free(struct kmem_cache *cachep, void *objp) BUG_ON(virt_to_cache(objp) != cachep); local_irq_save(flags); - __cache_free(cachep, objp, 0); + __cache_free(cachep, objp); local_irq_restore(flags); } EXPORT_SYMBOL(kmem_cache_free); @@ -3449,7 +3459,7 @@ void kfree(const void *objp) kfree_debugcheck(objp); c = virt_to_cache(objp); debug_check_no_locks_freed(objp, obj_size(c)); - __cache_free(c, (void *)objp, 0); + __cache_free(c, (void *)objp); local_irq_restore(flags); } EXPORT_SYMBOL(kfree); |