diff options
| -rw-r--r-- | drivers/ata/sata_sil.c | 96 |
1 files changed, 94 insertions, 2 deletions
diff --git a/drivers/ata/sata_sil.c b/drivers/ata/sata_sil.c index 17737092177..564c142b03b 100644 --- a/drivers/ata/sata_sil.c +++ b/drivers/ata/sata_sil.c @@ -46,7 +46,9 @@ #include <linux/libata.h> #define DRV_NAME "sata_sil" -#define DRV_VERSION "2.3" +#define DRV_VERSION "2.4" + +#define SIL_DMA_BOUNDARY 0x7fffffffUL enum { SIL_MMIO_BAR = 5, @@ -118,6 +120,10 @@ static void sil_dev_config(struct ata_device *dev); static int sil_scr_read(struct ata_link *link, unsigned int sc_reg, u32 *val); static int sil_scr_write(struct ata_link *link, unsigned int sc_reg, u32 val); static int sil_set_mode(struct ata_link *link, struct ata_device **r_failed); +static void sil_qc_prep(struct ata_queued_cmd *qc); +static void sil_bmdma_setup(struct ata_queued_cmd *qc); +static void sil_bmdma_start(struct ata_queued_cmd *qc); +static void sil_bmdma_stop(struct ata_queued_cmd *qc); static void sil_freeze(struct ata_port *ap); static void sil_thaw(struct ata_port *ap); @@ -167,13 +173,22 @@ static struct pci_driver sil_pci_driver = { }; static struct scsi_host_template sil_sht = { - ATA_BMDMA_SHT(DRV_NAME), + ATA_BASE_SHT(DRV_NAME), + /** These controllers support Large Block Transfer which allows + transfer chunks up to 2GB and which cross 64KB boundaries, + therefore the DMA limits are more relaxed than standard ATA SFF. */ + .dma_boundary = SIL_DMA_BOUNDARY, + .sg_tablesize = ATA_MAX_PRD }; static struct ata_port_operations sil_ops = { .inherits = &ata_bmdma_port_ops, .dev_config = sil_dev_config, .set_mode = sil_set_mode, + .bmdma_setup = sil_bmdma_setup, + .bmdma_start = sil_bmdma_start, + .bmdma_stop = sil_bmdma_stop, + .qc_prep = sil_qc_prep, .freeze = sil_freeze, .thaw = sil_thaw, .scr_read = sil_scr_read, @@ -249,6 +264,83 @@ module_param(slow_down, int, 0444); MODULE_PARM_DESC(slow_down, "Sledgehammer used to work around random problems, by limiting commands to 15 sectors (0=off, 1=on)"); +static void sil_bmdma_stop(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + void __iomem *mmio_base = ap->host->iomap[SIL_MMIO_BAR]; + void __iomem *bmdma2 = mmio_base + sil_port[ap->port_no].bmdma2; + + /* clear start/stop bit - can safely always write 0 */ + iowrite8(0, bmdma2); + + /* one-PIO-cycle guaranteed wait, per spec, for HDMA1:0 transition */ + ata_sff_dma_pause(ap); +} + +static void sil_bmdma_setup(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + void __iomem *bmdma = ap->ioaddr.bmdma_addr; + + /* load PRD table addr. */ + iowrite32(ap->prd_dma, bmdma + ATA_DMA_TABLE_OFS); + + /* issue r/w command */ + ap->ops->sff_exec_command(ap, &qc->tf); +} + +static void sil_bmdma_start(struct ata_queued_cmd *qc) +{ + unsigned int rw = (qc->tf.flags & ATA_TFLAG_WRITE); + struct ata_port *ap = qc->ap; + void __iomem *mmio_base = ap->host->iomap[SIL_MMIO_BAR]; + void __iomem *bmdma2 = mmio_base + sil_port[ap->port_no].bmdma2; + u8 dmactl = ATA_DMA_START; + + /* set transfer direction, start host DMA transaction + Note: For Large Block Transfer to work, the DMA must be started + using the bmdma2 register. */ + if (!rw) + dmactl |= ATA_DMA_WR; + iowrite8(dmactl, bmdma2); +} + +/* The way God intended PCI IDE scatter/gather lists to look and behave... */ +static void sil_fill_sg(struct ata_queued_cmd *qc) +{ + struct scatterlist *sg; + struct ata_port *ap = qc->ap; + struct ata_prd *prd, *last_prd = NULL; + unsigned int si; + + prd = &ap->prd[0]; + for_each_sg(qc->sg, sg, qc->n_elem, si) { + /* Note h/w doesn't support 64-bit, so we unconditionally + * truncate dma_addr_t to u32. + */ + u32 addr = (u32) sg_dma_address(sg); + u32 sg_len = sg_dma_len(sg); + + prd->addr = cpu_to_le32(addr); + prd->flags_len = cpu_to_le32(sg_len); + VPRINTK("PRD[%u] = (0x%X, 0x%X)\n", pi, addr, sg_len); + + last_prd = prd; + prd++; + } + + if (likely(last_prd)) + last_prd->flags_len |= cpu_to_le32(ATA_PRD_EOT); +} + +static void sil_qc_prep(struct ata_queued_cmd *qc) +{ + if (!(qc->flags & ATA_QCFLAG_DMAMAP)) + return; + + sil_fill_sg(qc); +} + static unsigned char sil_get_device_cache_line(struct pci_dev *pdev) { u8 cache_line = 0; |