diff options
32 files changed, 35 insertions, 35 deletions
diff --git a/Documentation/hwmon/pc87427 b/Documentation/hwmon/pc87427 index d1ebbe510f3..db5cc1227a8 100644 --- a/Documentation/hwmon/pc87427 +++ b/Documentation/hwmon/pc87427 @@ -34,5 +34,5 @@ Fan rotation speeds are reported as 14-bit values from a gated clock signal. Speeds down to 83 RPM can be measured. An alarm is triggered if the rotation speed drops below a programmable -limit. Another alarm is triggered if the speed is too low to to be measured +limit. Another alarm is triggered if the speed is too low to be measured (including stalled or missing fan). diff --git a/Documentation/networking/regulatory.txt b/Documentation/networking/regulatory.txt index eaa1a25946c..ee31369e9e5 100644 --- a/Documentation/networking/regulatory.txt +++ b/Documentation/networking/regulatory.txt @@ -96,7 +96,7 @@ Example code - drivers hinting an alpha2: This example comes from the zd1211rw device driver. You can start by having a mapping of your device's EEPROM country/regulatory -domain value to to a specific alpha2 as follows: +domain value to a specific alpha2 as follows: static struct zd_reg_alpha2_map reg_alpha2_map[] = { { ZD_REGDOMAIN_FCC, "US" }, diff --git a/Documentation/scsi/scsi_fc_transport.txt b/Documentation/scsi/scsi_fc_transport.txt index d7f181701dc..aec6549ab09 100644 --- a/Documentation/scsi/scsi_fc_transport.txt +++ b/Documentation/scsi/scsi_fc_transport.txt @@ -378,7 +378,7 @@ Vport Disable/Enable: int vport_disable(struct fc_vport *vport, bool disable) where: - vport: Is vport to to be enabled or disabled + vport: Is vport to be enabled or disabled disable: If "true", the vport is to be disabled. If "false", the vport is to be enabled. diff --git a/arch/ia64/ia32/sys_ia32.c b/arch/ia64/ia32/sys_ia32.c index 16ef61a91d9..625ed8f76fc 100644 --- a/arch/ia64/ia32/sys_ia32.c +++ b/arch/ia64/ia32/sys_ia32.c @@ -1270,7 +1270,7 @@ putreg (struct task_struct *child, int regno, unsigned int value) case PT_CS: if (value != __USER_CS) printk(KERN_ERR - "ia32.putreg: attempt to to set invalid segment register %d = %x\n", + "ia32.putreg: attempt to set invalid segment register %d = %x\n", regno, value); break; default: diff --git a/arch/um/include/shared/ptrace_user.h b/arch/um/include/shared/ptrace_user.h index 4bce6e01288..7fd8539bc19 100644 --- a/arch/um/include/shared/ptrace_user.h +++ b/arch/um/include/shared/ptrace_user.h @@ -29,7 +29,7 @@ extern int ptrace_setregs(long pid, unsigned long *regs_in); * recompilation. So, we use PTRACE_OLDSETOPTIONS in UML. * We also want to be able to build the kernel on 2.4, which doesn't * have PTRACE_OLDSETOPTIONS. So, if it is missing, we declare - * PTRACE_OLDSETOPTIONS to to be the same as PTRACE_SETOPTIONS. + * PTRACE_OLDSETOPTIONS to be the same as PTRACE_SETOPTIONS. * * On architectures, that start to support PTRACE_O_TRACESYSGOOD on * linux 2.6, PTRACE_OLDSETOPTIONS never is defined, and also isn't diff --git a/drivers/char/agp/uninorth-agp.c b/drivers/char/agp/uninorth-agp.c index 20ef1bf5e72..703959eba45 100644 --- a/drivers/char/agp/uninorth-agp.c +++ b/drivers/char/agp/uninorth-agp.c @@ -270,7 +270,7 @@ static void uninorth_agp_enable(struct agp_bridge_data *bridge, u32 mode) if ((uninorth_rev >= 0x30) && (uninorth_rev <= 0x33)) { /* - * We need to to set REQ_DEPTH to 7 for U3 versions 1.0, 2.1, + * We need to set REQ_DEPTH to 7 for U3 versions 1.0, 2.1, * 2.2 and 2.3, Darwin do so. */ if ((command >> AGPSTAT_RQ_DEPTH_SHIFT) > 7) diff --git a/drivers/gpu/drm/mga/mga_state.c b/drivers/gpu/drm/mga/mga_state.c index b710fab21cb..a53b848e0f1 100644 --- a/drivers/gpu/drm/mga/mga_state.c +++ b/drivers/gpu/drm/mga/mga_state.c @@ -239,7 +239,7 @@ static __inline__ void mga_g200_emit_pipe(drm_mga_private_t * dev_priv) MGA_WR34, 0x00000000, MGA_WR42, 0x0000ffff, MGA_WR60, 0x0000ffff); - /* Padding required to to hardware bug. + /* Padding required due to hardware bug. */ DMA_BLOCK(MGA_DMAPAD, 0xffffffff, MGA_DMAPAD, 0xffffffff, @@ -317,7 +317,7 @@ static __inline__ void mga_g400_emit_pipe(drm_mga_private_t * dev_priv) MGA_WR52, MGA_G400_WR_MAGIC, /* tex1 width */ MGA_WR60, MGA_G400_WR_MAGIC); /* tex1 height */ - /* Padding required to to hardware bug */ + /* Padding required due to hardware bug */ DMA_BLOCK(MGA_DMAPAD, 0xffffffff, MGA_DMAPAD, 0xffffffff, MGA_DMAPAD, 0xffffffff, diff --git a/drivers/lguest/page_tables.c b/drivers/lguest/page_tables.c index a8d0aee3bc0..8aaad65c3bb 100644 --- a/drivers/lguest/page_tables.c +++ b/drivers/lguest/page_tables.c @@ -894,7 +894,7 @@ void guest_set_pte(struct lg_cpu *cpu, * tells us they've changed. When the Guest tries to use the new entry it will * fault and demand_page() will fix it up. * - * So with that in mind here's our code to to update a (top-level) PGD entry: + * So with that in mind here's our code to update a (top-level) PGD entry: */ void guest_set_pgd(struct lguest *lg, unsigned long gpgdir, u32 idx) { diff --git a/drivers/media/video/gspca/m5602/m5602_core.c b/drivers/media/video/gspca/m5602/m5602_core.c index 8a5bba16ff3..7f1e5415850 100644 --- a/drivers/media/video/gspca/m5602/m5602_core.c +++ b/drivers/media/video/gspca/m5602/m5602_core.c @@ -56,7 +56,7 @@ int m5602_read_bridge(struct sd *sd, const u8 address, u8 *i2c_data) return (err < 0) ? err : 0; } -/* Writes a byte to to the m5602 */ +/* Writes a byte to the m5602 */ int m5602_write_bridge(struct sd *sd, const u8 address, const u8 i2c_data) { int err; diff --git a/drivers/mmc/host/mxcmmc.c b/drivers/mmc/host/mxcmmc.c index bc14bb1b057..88671529c45 100644 --- a/drivers/mmc/host/mxcmmc.c +++ b/drivers/mmc/host/mxcmmc.c @@ -512,7 +512,7 @@ static void mxcmci_cmd_done(struct mxcmci_host *host, unsigned int stat) } /* For the DMA case the DMA engine handles the data transfer - * automatically. For non DMA we have to to it ourselves. + * automatically. For non DMA we have to do it ourselves. * Don't do it in interrupt context though. */ if (!mxcmci_use_dma(host) && host->data) diff --git a/drivers/mtd/maps/ixp2000.c b/drivers/mtd/maps/ixp2000.c index d4fb9a3ab4d..1bdf0ee6d0b 100644 --- a/drivers/mtd/maps/ixp2000.c +++ b/drivers/mtd/maps/ixp2000.c @@ -184,7 +184,7 @@ static int ixp2000_flash_probe(struct platform_device *dev) info->map.bankwidth = 1; /* - * map_priv_2 is used to store a ptr to to the bank_setup routine + * map_priv_2 is used to store a ptr to the bank_setup routine */ info->map.map_priv_2 = (unsigned long) ixp_data->bank_setup; diff --git a/drivers/mtd/ubi/eba.c b/drivers/mtd/ubi/eba.c index e4d9ef0c965..9f87c99189a 100644 --- a/drivers/mtd/ubi/eba.c +++ b/drivers/mtd/ubi/eba.c @@ -1065,7 +1065,7 @@ int ubi_eba_copy_leb(struct ubi_device *ubi, int from, int to, } /* - * Now we have got to calculate how much data we have to to copy. In + * Now we have got to calculate how much data we have to copy. In * case of a static volume it is fairly easy - the VID header contains * the data size. In case of a dynamic volume it is more difficult - we * have to read the contents, cut 0xFF bytes from the end and copy only diff --git a/drivers/mtd/ubi/ubi.h b/drivers/mtd/ubi/ubi.h index 6a5fe963378..47877942dec 100644 --- a/drivers/mtd/ubi/ubi.h +++ b/drivers/mtd/ubi/ubi.h @@ -570,7 +570,7 @@ void ubi_do_get_volume_info(struct ubi_device *ubi, struct ubi_volume *vol, /* * ubi_rb_for_each_entry - walk an RB-tree. - * @rb: a pointer to type 'struct rb_node' to to use as a loop counter + * @rb: a pointer to type 'struct rb_node' to use as a loop counter * @pos: a pointer to RB-tree entry type to use as a loop counter * @root: RB-tree's root * @member: the name of the 'struct rb_node' within the RB-tree entry diff --git a/drivers/net/bonding/bond_3ad.c b/drivers/net/bonding/bond_3ad.c index cea5cfe23b7..c3fa31c9f2a 100644 --- a/drivers/net/bonding/bond_3ad.c +++ b/drivers/net/bonding/bond_3ad.c @@ -1987,7 +1987,7 @@ void bond_3ad_unbind_slave(struct slave *slave) // find new aggregator for the related port(s) new_aggregator = __get_first_agg(port); for (; new_aggregator; new_aggregator = __get_next_agg(new_aggregator)) { - // if the new aggregator is empty, or it connected to to our port only + // if the new aggregator is empty, or it is connected to our port only if (!new_aggregator->lag_ports || ((new_aggregator->lag_ports == port) && !new_aggregator->lag_ports->next_port_in_aggregator)) { break; } diff --git a/drivers/net/e1000/e1000_hw.c b/drivers/net/e1000/e1000_hw.c index cda6b397550..45ac225a7aa 100644 --- a/drivers/net/e1000/e1000_hw.c +++ b/drivers/net/e1000/e1000_hw.c @@ -3035,7 +3035,7 @@ s32 e1000_check_for_link(struct e1000_hw *hw) /* If TBI compatibility is was previously off, turn it on. For * compatibility with a TBI link partner, we will store bad * packets. Some frames have an additional byte on the end and - * will look like CRC errors to to the hardware. + * will look like CRC errors to the hardware. */ if (!hw->tbi_compatibility_on) { hw->tbi_compatibility_on = true; diff --git a/drivers/net/wireless/zd1211rw/zd_chip.c b/drivers/net/wireless/zd1211rw/zd_chip.c index 5e110a2328a..4e79a980013 100644 --- a/drivers/net/wireless/zd1211rw/zd_chip.c +++ b/drivers/net/wireless/zd1211rw/zd_chip.c @@ -368,7 +368,7 @@ error: return r; } -/* MAC address: if custom mac addresses are to to be used CR_MAC_ADDR_P1 and +/* MAC address: if custom mac addresses are to be used CR_MAC_ADDR_P1 and * CR_MAC_ADDR_P2 must be overwritten */ int zd_write_mac_addr(struct zd_chip *chip, const u8 *mac_addr) diff --git a/drivers/scsi/megaraid/megaraid_sas.c b/drivers/scsi/megaraid/megaraid_sas.c index 7dc3d1894b1..a39addc3a59 100644 --- a/drivers/scsi/megaraid/megaraid_sas.c +++ b/drivers/scsi/megaraid/megaraid_sas.c @@ -718,7 +718,7 @@ megasas_build_dcdb(struct megasas_instance *instance, struct scsi_cmnd *scp, * megasas_build_ldio - Prepares IOs to logical devices * @instance: Adapter soft state * @scp: SCSI command - * @cmd: Command to to be prepared + * @cmd: Command to be prepared * * Frames (and accompanying SGLs) for regular SCSI IOs use this function. */ diff --git a/drivers/scsi/qla4xxx/ql4_os.c b/drivers/scsi/qla4xxx/ql4_os.c index 40e3cafb3a9..83c8b5e4fc8 100644 --- a/drivers/scsi/qla4xxx/ql4_os.c +++ b/drivers/scsi/qla4xxx/ql4_os.c @@ -1422,7 +1422,7 @@ static void qla4xxx_slave_destroy(struct scsi_device *sdev) /** * qla4xxx_del_from_active_array - returns an active srb * @ha: Pointer to host adapter structure. - * @index: index into to the active_array + * @index: index into the active_array * * This routine removes and returns the srb at the specified index **/ @@ -1500,7 +1500,7 @@ static int qla4xxx_wait_for_hba_online(struct scsi_qla_host *ha) /** * qla4xxx_eh_wait_for_commands - wait for active cmds to finish. - * @ha: pointer to to HBA + * @ha: pointer to HBA * @t: target id * @l: lun id * diff --git a/drivers/staging/rt2860/rtmp.h b/drivers/staging/rt2860/rtmp.h index 3f498f6f3ff..90fd40f2473 100644 --- a/drivers/staging/rt2860/rtmp.h +++ b/drivers/staging/rt2860/rtmp.h @@ -2060,7 +2060,7 @@ typedef struct _STA_ADMIN_CONFIG { BOOLEAN AdhocBGJoined; // Indicate Adhoc B/G Join. BOOLEAN Adhoc20NJoined; // Indicate Adhoc 20MHz N Join. #endif - // New for WPA, windows want us to to keep association information and + // New for WPA, windows want us to keep association information and // Fixed IEs from last association response NDIS_802_11_ASSOCIATION_INFORMATION AssocInfo; USHORT ReqVarIELen; // Length of next VIE include EID & Length diff --git a/drivers/usb/serial/cypress_m8.h b/drivers/usb/serial/cypress_m8.h index e772b01ac3a..1fd360e0406 100644 --- a/drivers/usb/serial/cypress_m8.h +++ b/drivers/usb/serial/cypress_m8.h @@ -57,7 +57,7 @@ #define UART_RI 0x10 /* ring indicator - modem - device to host */ #define UART_CD 0x40 /* carrier detect - modem - device to host */ #define CYP_ERROR 0x08 /* received from input report - device to host */ -/* Note - the below has nothing to to with the "feature report" reset */ +/* Note - the below has nothing to do with the "feature report" reset */ #define CONTROL_RESET 0x08 /* sent with output report - host to device */ /* End of RS-232 protocol definitions */ diff --git a/drivers/usb/serial/io_edgeport.c b/drivers/usb/serial/io_edgeport.c index dc0f832657e..b97960ac92f 100644 --- a/drivers/usb/serial/io_edgeport.c +++ b/drivers/usb/serial/io_edgeport.c @@ -2540,7 +2540,7 @@ static int calc_baud_rate_divisor(int baudrate, int *divisor) /***************************************************************************** * send_cmd_write_uart_register - * this function builds up a uart register message and sends to to the device. + * this function builds up a uart register message and sends to the device. *****************************************************************************/ static int send_cmd_write_uart_register(struct edgeport_port *edge_port, __u8 regNum, __u8 regValue) diff --git a/drivers/usb/serial/kl5kusb105.c b/drivers/usb/serial/kl5kusb105.c index a61673133d7..f7373371b13 100644 --- a/drivers/usb/serial/kl5kusb105.c +++ b/drivers/usb/serial/kl5kusb105.c @@ -38,7 +38,7 @@ * 0.3a - implemented pools of write URBs * 0.3 - alpha version for public testing * 0.2 - TIOCMGET works, so autopilot(1) can be used! - * 0.1 - can be used to to pilot-xfer -p /dev/ttyUSB0 -l + * 0.1 - can be used to do pilot-xfer -p /dev/ttyUSB0 -l * * The driver skeleton is mainly based on mct_u232.c and various other * pieces of code shamelessly copied from the drivers/usb/serial/ directory. diff --git a/fs/ext4/inode.c b/fs/ext4/inode.c index 4abd683b963..3a798737e30 100644 --- a/fs/ext4/inode.c +++ b/fs/ext4/inode.c @@ -2337,7 +2337,7 @@ static int __mpage_da_writepage(struct page *page, /* * Rest of the page in the page_vec * redirty then and skip then. We will - * try to to write them again after + * try to write them again after * starting a new transaction */ redirty_page_for_writepage(wbc, page); diff --git a/fs/gfs2/rgrp.c b/fs/gfs2/rgrp.c index 28c590b7c9d..8f1cfb02a6c 100644 --- a/fs/gfs2/rgrp.c +++ b/fs/gfs2/rgrp.c @@ -179,7 +179,7 @@ static inline u64 gfs2_bit_search(const __le64 *ptr, u64 mask, u8 state) * always aligned to a 64 bit boundary. * * The size of the buffer is in bytes, but is it assumed that it is - * always ok to to read a complete multiple of 64 bits at the end + * always ok to read a complete multiple of 64 bits at the end * of the block in case the end is no aligned to a natural boundary. * * Return: the block number (bitmap buffer scope) that was found diff --git a/fs/ntfs/layout.h b/fs/ntfs/layout.h index 50931b1ce4b..8b2549f672b 100644 --- a/fs/ntfs/layout.h +++ b/fs/ntfs/layout.h @@ -829,7 +829,7 @@ enum { /* Note, FILE_ATTR_VALID_SET_FLAGS masks out the old DOS VolId, the F_A_DEVICE, F_A_DIRECTORY, F_A_SPARSE_FILE, F_A_REPARSE_POINT, F_A_COMPRESSED, and F_A_ENCRYPTED and preserves the rest. This mask - is used to to obtain all flags that are valid for setting. */ + is used to obtain all flags that are valid for setting. */ /* * The flag FILE_ATTR_DUP_FILENAME_INDEX_PRESENT is present in all * FILENAME_ATTR attributes but not in the STANDARD_INFORMATION diff --git a/include/acpi/actypes.h b/include/acpi/actypes.h index 37ba576d06e..8052236d1a3 100644 --- a/include/acpi/actypes.h +++ b/include/acpi/actypes.h @@ -288,7 +288,7 @@ typedef u32 acpi_physical_address; /* * Some compilers complain about unused variables. Sometimes we don't want to * use all the variables (for example, _acpi_module_name). This allows us - * to to tell the compiler in a per-variable manner that a variable + * to tell the compiler in a per-variable manner that a variable * is unused */ #ifndef ACPI_UNUSED_VAR diff --git a/include/acpi/platform/acgcc.h b/include/acpi/platform/acgcc.h index 935c5d7fc86..6aadbf84ae7 100644 --- a/include/acpi/platform/acgcc.h +++ b/include/acpi/platform/acgcc.h @@ -57,7 +57,7 @@ /* * Some compilers complain about unused variables. Sometimes we don't want to * use all the variables (for example, _acpi_module_name). This allows us - * to to tell the compiler warning in a per-variable manner that a variable + * to tell the compiler warning in a per-variable manner that a variable * is unused. */ #define ACPI_UNUSED_VAR __attribute__ ((unused)) diff --git a/include/rdma/ib_cm.h b/include/rdma/ib_cm.h index 93885830430..c8f94e8db69 100644 --- a/include/rdma/ib_cm.h +++ b/include/rdma/ib_cm.h @@ -482,7 +482,7 @@ int ib_send_cm_rej(struct ib_cm_id *cm_id, * message. * @cm_id: Connection identifier associated with the connection message. * @service_timeout: The lower 5-bits specify the maximum time required for - * the sender to reply to to the connection message. The upper 3-bits + * the sender to reply to the connection message. The upper 3-bits * specify additional control flags. * @private_data: Optional user-defined private data sent with the * message receipt acknowledgement. diff --git a/kernel/tracepoint.c b/kernel/tracepoint.c index 9489a0a9b1b..cc89be5bc0f 100644 --- a/kernel/tracepoint.c +++ b/kernel/tracepoint.c @@ -48,7 +48,7 @@ static struct hlist_head tracepoint_table[TRACEPOINT_TABLE_SIZE]; /* * Note about RCU : - * It is used to to delay the free of multiple probes array until a quiescent + * It is used to delay the free of multiple probes array until a quiescent * state is reached. * Tracepoint entries modifications are protected by the tracepoints_mutex. */ diff --git a/lib/zlib_deflate/deflate.c b/lib/zlib_deflate/deflate.c index c3e4a2baf83..46a31e5f49c 100644 --- a/lib/zlib_deflate/deflate.c +++ b/lib/zlib_deflate/deflate.c @@ -135,7 +135,7 @@ static const config configuration_table[10] = { /* =========================================================================== * Update a hash value with the given input byte - * IN assertion: all calls to to UPDATE_HASH are made with consecutive + * IN assertion: all calls to UPDATE_HASH are made with consecutive * input characters, so that a running hash key can be computed from the * previous key instead of complete recalculation each time. */ @@ -146,7 +146,7 @@ static const config configuration_table[10] = { * Insert string str in the dictionary and set match_head to the previous head * of the hash chain (the most recent string with same hash key). Return * the previous length of the hash chain. - * IN assertion: all calls to to INSERT_STRING are made with consecutive + * IN assertion: all calls to INSERT_STRING are made with consecutive * input characters and the first MIN_MATCH bytes of str are valid * (except for the last MIN_MATCH-1 bytes of the input file). */ diff --git a/net/rxrpc/ar-call.c b/net/rxrpc/ar-call.c index d9231245a79..bc0019f704f 100644 --- a/net/rxrpc/ar-call.c +++ b/net/rxrpc/ar-call.c @@ -96,7 +96,7 @@ static struct rxrpc_call *rxrpc_alloc_call(gfp_t gfp) } /* - * allocate a new client call and attempt to to get a connection slot for it + * allocate a new client call and attempt to get a connection slot for it */ static struct rxrpc_call *rxrpc_alloc_client_call( struct rxrpc_sock *rx, diff --git a/net/sched/sch_hfsc.c b/net/sched/sch_hfsc.c index 375d64cb1a3..2c5c76be18f 100644 --- a/net/sched/sch_hfsc.c +++ b/net/sched/sch_hfsc.c @@ -77,7 +77,7 @@ * The service curve parameters are converted to the internal * representation. The slope values are scaled to avoid overflow. * the inverse slope values as well as the y-projection of the 1st - * segment are kept in order to to avoid 64-bit divide operations + * segment are kept in order to avoid 64-bit divide operations * that are expensive on 32-bit architectures. */ |