diff options
194 files changed, 4593 insertions, 1698 deletions
diff --git a/Documentation/cpu-freq/cpufreq-stats.txt b/Documentation/cpu-freq/cpufreq-stats.txt new file mode 100644 index 00000000000..e2d1e760b4b --- /dev/null +++ b/Documentation/cpu-freq/cpufreq-stats.txt @@ -0,0 +1,128 @@ + + CPU frequency and voltage scaling statictics in the Linux(TM) kernel + + + L i n u x c p u f r e q - s t a t s d r i v e r + + - information for users - + + + Venkatesh Pallipadi <venkatesh.pallipadi@intel.com> + +Contents +1. Introduction +2. Statistics Provided (with example) +3. Configuring cpufreq-stats + + +1. Introduction + +cpufreq-stats is a driver that provices CPU frequency statistics for each CPU. +This statistics is provided in /sysfs as a bunch of read_only interfaces. This +interface (when configured) will appear in a seperate directory under cpufreq +in /sysfs (<sysfs root>/devices/system/cpu/cpuX/cpufreq/stats/) for each CPU. +Various statistics will form read_only files under this directory. + +This driver is designed to be independent of any particular cpufreq_driver +that may be running on your CPU. So, it will work with any cpufreq_driver. + + +2. Statistics Provided (with example) + +cpufreq stats provides following statistics (explained in detail below). +- time_in_state +- total_trans +- trans_table + +All the statistics will be from the time the stats driver has been inserted +to the time when a read of a particular statistic is done. Obviously, stats +driver will not have any information about the the frequcny transitions before +the stats driver insertion. + +-------------------------------------------------------------------------------- +<mysystem>:/sys/devices/system/cpu/cpu0/cpufreq/stats # ls -l +total 0 +drwxr-xr-x 2 root root 0 May 14 16:06 . +drwxr-xr-x 3 root root 0 May 14 15:58 .. +-r--r--r-- 1 root root 4096 May 14 16:06 time_in_state +-r--r--r-- 1 root root 4096 May 14 16:06 total_trans +-r--r--r-- 1 root root 4096 May 14 16:06 trans_table +-------------------------------------------------------------------------------- + +- time_in_state +This gives the amount of time spent in each of the frequencies supported by +this CPU. The cat output will have "<frequency> <time>" pair in each line, which +will mean this CPU spent <time> usertime units of time at <frequency>. Output +will have one line for each of the supported freuencies. usertime units here +is 10mS (similar to other time exported in /proc). + +-------------------------------------------------------------------------------- +<mysystem>:/sys/devices/system/cpu/cpu0/cpufreq/stats # cat time_in_state +3600000 2089 +3400000 136 +3200000 34 +3000000 67 +2800000 172488 +-------------------------------------------------------------------------------- + + +- total_trans +This gives the total number of frequency transitions on this CPU. The cat +output will have a single count which is the total number of frequency +transitions. + +-------------------------------------------------------------------------------- +<mysystem>:/sys/devices/system/cpu/cpu0/cpufreq/stats # cat total_trans +20 +-------------------------------------------------------------------------------- + +- trans_table +This will give a fine grained information about all the CPU frequency +transitions. The cat output here is a two dimensional matrix, where an entry +<i,j> (row i, column j) represents the count of number of transitions from +Freq_i to Freq_j. Freq_i is in descending order with increasing rows and +Freq_j is in descending order with increasing columns. The output here also +contains the actual freq values for each row and column for better readability. + +-------------------------------------------------------------------------------- +<mysystem>:/sys/devices/system/cpu/cpu0/cpufreq/stats # cat trans_table + From : To + : 3600000 3400000 3200000 3000000 2800000 + 3600000: 0 5 0 0 0 + 3400000: 4 0 2 0 0 + 3200000: 0 1 0 2 0 + 3000000: 0 0 1 0 3 + 2800000: 0 0 0 2 0 +-------------------------------------------------------------------------------- + + +3. Configuring cpufreq-stats + +To configure cpufreq-stats in your kernel +Config Main Menu + Power management options (ACPI, APM) ---> + CPU Frequency scaling ---> + [*] CPU Frequency scaling + <*> CPU frequency translation statistics + [*] CPU frequency translation statistics details + + +"CPU Frequency scaling" (CONFIG_CPU_FREQ) should be enabled to configure +cpufreq-stats. + +"CPU frequency translation statistics" (CONFIG_CPU_FREQ_STAT) provides the +basic statistics which includes time_in_state and total_trans. + +"CPU frequency translation statistics details" (CONFIG_CPU_FREQ_STAT_DETAILS) +provides fine grained cpufreq stats by trans_table. The reason for having a +seperate config option for trans_table is: +- trans_table goes against the traditional /sysfs rule of one value per + interface. It provides a whole bunch of value in a 2 dimensional matrix + form. + +Once these two options are enabled and your CPU supports cpufrequency, you +will be able to see the CPU frequency statistics in /sysfs. + + + + diff --git a/MAINTAINERS b/MAINTAINERS index 5b8483334de..65ad8251e4b 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -239,6 +239,12 @@ L: linux-usb-devel@lists.sourceforge.net W: http://www.linux-usb.org/SpeedTouch/ S: Maintained +ALI1563 I2C DRIVER +P: Rudolf Marek +M: r.marek@sh.cvut.cz +L: sensors@stimpy.netroedge.com +S: Maintained + ALPHA PORT P: Richard Henderson M: rth@twiddle.net @@ -1023,8 +1029,8 @@ W: http://www.ia64-linux.org/ S: Maintained SN-IA64 (Itanium) SUB-PLATFORM -P: Jesse Barnes -M: jbarnes@sgi.com +P: Greg Edwards +M: edwardsg@sgi.com L: linux-altix@sgi.com L: linux-ia64@vger.kernel.org W: http://www.sgi.com/altix diff --git a/arch/h8300/kernel/process.c b/arch/h8300/kernel/process.c index 134aec1c6d1..b5f83e9f04d 100644 --- a/arch/h8300/kernel/process.c +++ b/arch/h8300/kernel/process.c @@ -54,7 +54,7 @@ asmlinkage void ret_from_fork(void); void default_idle(void) { while(1) { - if (need_resched()) { + if (!need_resched()) { local_irq_enable(); __asm__("sleep"); local_irq_disable(); diff --git a/arch/i386/kernel/cpu/cpufreq/Kconfig b/arch/i386/kernel/cpu/cpufreq/Kconfig index f25ffd74235..0f1eb507233 100644 --- a/arch/i386/kernel/cpu/cpufreq/Kconfig +++ b/arch/i386/kernel/cpu/cpufreq/Kconfig @@ -23,7 +23,7 @@ config X86_ACPI_CPUFREQ If in doubt, say N. config ELAN_CPUFREQ - tristate "AMD Elan" + tristate "AMD Elan SC400 and SC410" select CPU_FREQ_TABLE depends on X86_ELAN ---help--- @@ -38,6 +38,18 @@ config ELAN_CPUFREQ If in doubt, say N. +config SC520_CPUFREQ + tristate "AMD Elan SC520" + select CPU_FREQ_TABLE + depends on X86_ELAN + ---help--- + This adds the CPUFreq driver for AMD Elan SC520 processor. + + For details, take a look at <file:Documentation/cpu-freq/>. + + If in doubt, say N. + + config X86_POWERNOW_K6 tristate "AMD Mobile K6-2/K6-3 PowerNow!" select CPU_FREQ_TABLE diff --git a/arch/i386/kernel/cpu/cpufreq/Makefile b/arch/i386/kernel/cpu/cpufreq/Makefile index a922e97aeed..2e894f1c891 100644 --- a/arch/i386/kernel/cpu/cpufreq/Makefile +++ b/arch/i386/kernel/cpu/cpufreq/Makefile @@ -3,6 +3,7 @@ obj-$(CONFIG_X86_POWERNOW_K7) += powernow-k7.o obj-$(CONFIG_X86_POWERNOW_K8) += powernow-k8.o obj-$(CONFIG_X86_LONGHAUL) += longhaul.o obj-$(CONFIG_ELAN_CPUFREQ) += elanfreq.o +obj-$(CONFIG_SC520_CPUFREQ) += sc520_freq.o obj-$(CONFIG_X86_LONGRUN) += longrun.o obj-$(CONFIG_X86_GX_SUSPMOD) += gx-suspmod.o obj-$(CONFIG_X86_SPEEDSTEP_ICH) += speedstep-ich.o diff --git a/arch/i386/kernel/cpu/cpufreq/longhaul.c b/arch/i386/kernel/cpu/cpufreq/longhaul.c index ab0f9f5aac1..04e3563da4f 100644 --- a/arch/i386/kernel/cpu/cpufreq/longhaul.c +++ b/arch/i386/kernel/cpu/cpufreq/longhaul.c @@ -29,6 +29,7 @@ #include <linux/cpufreq.h> #include <linux/slab.h> #include <linux/string.h> +#include <linux/pci.h> #include <asm/msr.h> #include <asm/timex.h> @@ -119,7 +120,13 @@ static int longhaul_get_cpu_mult(void) static void do_powersaver(union msr_longhaul *longhaul, unsigned int clock_ratio_index) { + struct pci_dev *dev; + unsigned long flags; + unsigned int tmp_mask; int version; + int i; + u16 pci_cmd; + u16 cmd_state[64]; switch (cpu_model) { case CPU_EZRA_T: @@ -137,17 +144,58 @@ static void do_powersaver(union msr_longhaul *longhaul, longhaul->bits.SoftBusRatio4 = (clock_ratio_index & 0x10) >> 4; longhaul->bits.EnableSoftBusRatio = 1; longhaul->bits.RevisionKey = 0; - local_irq_disable(); - wrmsrl(MSR_VIA_LONGHAUL, longhaul->val); + + preempt_disable(); + local_irq_save(flags); + + /* + * get current pci bus master state for all devices + * and clear bus master bit + */ + dev = NULL; + i = 0; + do { + dev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, dev); + if (dev != NULL) { + pci_read_config_word(dev, PCI_COMMAND, &pci_cmd); + cmd_state[i++] = pci_cmd; + pci_cmd &= ~PCI_COMMAND_MASTER; + pci_write_config_word(dev, PCI_COMMAND, pci_cmd); + } + } while (dev != NULL); + + tmp_mask=inb(0x21); /* works on C3. save mask. */ + outb(0xFE,0x21); /* TMR0 only */ + outb(0xFF,0x80); /* delay */ + local_irq_enable(); + + __hlt(); + wrmsrl(MSR_VIA_LONGHAUL, longhaul->val); __hlt(); + local_irq_disable(); + + outb(tmp_mask,0x21); /* restore mask */ + + /* restore pci bus master state for all devices */ + dev = NULL; + i = 0; + do { + dev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, dev); + if (dev != NULL) { + pci_cmd = cmd_state[i++]; + pci_write_config_byte(dev, PCI_COMMAND, pci_cmd); + } + } while (dev != NULL); + local_irq_restore(flags); + preempt_enable(); + + /* disable bus ratio bit */ rdmsrl(MSR_VIA_LONGHAUL, longhaul->val); longhaul->bits.EnableSoftBusRatio = 0; longhaul->bits.RevisionKey = version; - local_irq_disable(); wrmsrl(MSR_VIA_LONGHAUL, longhaul->val); - local_irq_enable(); } /** @@ -578,7 +626,7 @@ static int __init longhaul_cpu_init(struct cpufreq_policy *policy) longhaul_setup_voltagescaling(); policy->governor = CPUFREQ_DEFAULT_GOVERNOR; - policy->cpuinfo.transition_latency = CPUFREQ_ETERNAL; + policy->cpuinfo.transition_latency = 200000; /* nsec */ policy->cur = calc_speed(longhaul_get_cpu_mult()); ret = cpufreq_frequency_table_cpuinfo(policy, longhaul_table); diff --git a/arch/i386/kernel/cpu/cpufreq/powernow-k7.c b/arch/i386/kernel/cpu/cpufreq/powernow-k7.c index 913f652623d..5c530064eb7 100644 --- a/arch/i386/kernel/cpu/cpufreq/powernow-k7.c +++ b/arch/i386/kernel/cpu/cpufreq/powernow-k7.c @@ -23,6 +23,7 @@ #include <linux/dmi.h> #include <asm/msr.h> +#include <asm/timer.h> #include <asm/timex.h> #include <asm/io.h> #include <asm/system.h> @@ -586,13 +587,17 @@ static int __init powernow_cpu_init (struct cpufreq_policy *policy) rdmsrl (MSR_K7_FID_VID_STATUS, fidvidstatus.val); - /* A K7 with powernow technology is set to max frequency by BIOS */ - fsb = (10 * cpu_khz) / fid_codes[fidvidstatus.bits.MFID]; + /* recalibrate cpu_khz */ + result = recalibrate_cpu_khz(); + if (result) + return result; + + fsb = (10 * cpu_khz) / fid_codes[fidvidstatus.bits.CFID]; if (!fsb) { printk(KERN_WARNING PFX "can not determine bus frequency\n"); return -EINVAL; } - dprintk("FSB: %3d.%03d MHz\n", fsb/1000, fsb%1000); + dprintk("FSB: %3dMHz\n", fsb/1000); if (dmi_check_system(powernow_dmi_table) || acpi_force) { printk (KERN_INFO PFX "PSB/PST known to be broken. Trying ACPI instead\n"); diff --git a/arch/i386/kernel/cpu/cpufreq/powernow-k8.c b/arch/i386/kernel/cpu/cpufreq/powernow-k8.c index a65ff7e32e5..10cc096c0ad 100644 --- a/arch/i386/kernel/cpu/cpufreq/powernow-k8.c +++ b/arch/i386/kernel/cpu/cpufreq/powernow-k8.c @@ -4,7 +4,7 @@ * GNU general public license version 2. See "COPYING" or * http://www.gnu.org/licenses/gpl.html * - * Support : paul.devriendt@amd.com + * Support : mark.langsdorf@amd.com * * Based on the powernow-k7.c module written by Dave Jones. * (C) 2003 Dave Jones <davej@codemonkey.org.uk> on behalf of SuSE Labs @@ -15,12 +15,13 @@ * * Valuable input gratefully received from Dave Jones, Pavel Machek, * Dominik Brodowski, and others. + * Originally developed by Paul Devriendt. * Processor information obtained from Chapter 9 (Power and Thermal Management) * of the "BIOS and Kernel Developer's Guide for the AMD Athlon 64 and AMD * Opteron Processors" available for download from www.amd.com * * Tables for specific CPUs can be infrerred from - * http://www.amd.com/us-en/assets/content_type/white_papers_and_tech_docs/30430.pdf + * http://www.amd.com/us-en/assets/content_type/white_papers_and_tech_docs/30430.pdf */ #include <linux/kernel.h> @@ -30,6 +31,7 @@ #include <linux/cpufreq.h> #include <linux/slab.h> #include <linux/string.h> +#include <linux/cpumask.h> #include <asm/msr.h> #include <asm/io.h> @@ -42,7 +44,7 @@ #define PFX "powernow-k8: " #define BFX PFX "BIOS error: " -#define VERSION "version 1.00.09e" +#define VERSION "version 1.40.2" #include "powernow-k8.h" /* serialize freq changes */ @@ -50,6 +52,10 @@ static DECLARE_MUTEX(fidvid_sem); static struct powernow_k8_data *powernow_data[NR_CPUS]; +#ifndef CONFIG_SMP +static cpumask_t cpu_core_map[1]; +#endif + /* Return a frequency in MHz, given an input fid */ static u32 find_freq_from_fid(u32 fid) { @@ -274,11 +280,18 @@ static int core_voltage_pre_transition(struct powernow_k8_data *data, u32 reqvid { u32 rvosteps = data->rvo; u32 savefid = data->currfid; + u32 maxvid, lo; dprintk("ph1 (cpu%d): start, currfid 0x%x, currvid 0x%x, reqvid 0x%x, rvo 0x%x\n", smp_processor_id(), data->currfid, data->currvid, reqvid, data->rvo); + rdmsr(MSR_FIDVID_STATUS, lo, maxvid); + maxvid = 0x1f & (maxvid >> 16); + dprintk("ph1 maxvid=0x%x\n", maxvid); + if (reqvid < maxvid) /* lower numbers are higher voltages */ + reqvid = maxvid; + while (data->currvid > reqvid) { dprintk("ph1: curr 0x%x, req vid 0x%x\n", data->currvid, reqvid); @@ -286,8 +299,8 @@ static int core_voltage_pre_transition(struct powernow_k8_data *data, u32 reqvid return 1; } - while ((rvosteps > 0) && ((data->rvo + data->currvid) > reqvid)) { - if (data->currvid == 0) { + while ((rvosteps > 0) && ((data->rvo + data->currvid) > reqvid)) { + if (data->currvid == maxvid) { rvosteps = 0; } else { dprintk("ph1: changing vid for rvo, req 0x%x\n", @@ -671,7 +684,7 @@ static int find_psb_table(struct powernow_k8_data *data) * BIOS and Kernel Developer's Guide, which is available on * www.amd.com */ - printk(KERN_ERR PFX "BIOS error - no PSB\n"); + printk(KERN_INFO PFX "BIOS error - no PSB or ACPI _PSS objects\n"); return -ENODEV; } @@ -695,7 +708,7 @@ static int powernow_k8_cpu_init_acpi(struct powernow_k8_data *data) struct cpufreq_frequency_table *powernow_table; if (acpi_processor_register_performance(&data->acpi_data, data->cpu)) { - dprintk("register performance failed\n"); + dprintk("register performance failed: bad ACPI data\n"); return -EIO; } @@ -746,22 +759,23 @@ static int powernow_k8_cpu_init_acpi(struct powernow_k8_data *data) continue; } - if (fid < HI_FID_TABLE_BOTTOM) { - if (cntlofreq) { - /* if both entries are the same, ignore this - * one... - */ - if ((powernow_table[i].frequency != powernow_table[cntlofreq].frequency) || - (powernow_table[i].index != powernow_table[cntlofreq].index)) { - printk(KERN_ERR PFX "Too many lo freq table entries\n"); - goto err_out_mem; - } - - dprintk("double low frequency table entry, ignoring it.\n"); - powernow_table[i].frequency = CPUFREQ_ENTRY_INVALID; - continue; - } else - cntlofreq = i; + /* verify only 1 entry from the lo frequency table */ + if (fid < HI_FID_TABLE_BOTTOM) { + if (cntlofreq) { + /* if both entries are the same, ignore this + * one... + */ + if ((powernow_table[i].frequency != powernow_table[cntlofreq].frequency) || + (powernow_table[i].index != powernow_table[cntlofreq].index)) { + printk(KERN_ERR PFX "Too many lo freq table entries\n"); + goto err_out_mem; + } + + dprintk("double low frequency table entry, ignoring it.\n"); + powernow_table[i].frequency = CPUFREQ_ENTRY_INVALID; + continue; + } else + cntlofreq = i; } if (powernow_table[i].frequency != (data->acpi_data.states[i].core_frequency * 1000)) { @@ -816,7 +830,7 @@ static int transition_frequency(struct powernow_k8_data *data, unsigned int inde { u32 fid; u32 vid; - int res; + int res, i; struct cpufreq_freqs freqs; dprintk("cpu %d transition to index %u\n", smp_processor_id(), index); @@ -841,7 +855,8 @@ static int transition_frequency(struct powernow_k8_data *data, unsigned int inde } if ((fid < HI_FID_TABLE_BOTTOM) && (data->currfid < HI_FID_TABLE_BOTTOM)) { - printk("ignoring illegal change in lo freq table-%x to 0x%x\n", + printk(KERN_ERR PFX + "ignoring illegal change in lo freq table-%x to 0x%x\n", data->currfid, fid); return 1; } @@ -850,18 +865,20 @@ static int transition_frequency(struct powernow_k8_data *data, unsigned int inde smp_processor_id(), fid, vid); freqs.cpu = data->cpu; - freqs.old = find_khz_freq_from_fid(data->currfid); freqs.new = find_khz_freq_from_fid(fid); - cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); + for_each_cpu_mask(i, cpu_core_map[data->cpu]) { + freqs.cpu = i; + cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); + } - down(&fidvid_sem); res = transition_fid_vid(data, fid, vid); - up(&fidvid_sem); freqs.new = find_khz_freq_from_fid(data->currfid); - cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); - + for_each_cpu_mask(i, cpu_core_map[data->cpu]) { + freqs.cpu = i; + cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); + } return res; } @@ -874,6 +891,7 @@ static int powernowk8_target(struct cpufreq_policy *pol, unsigned targfreq, unsi u32 checkvid = data->currvid; unsigned int newstate; int ret = -EIO; + int i; /* only run on specific CPU from here on */ oldmask = current->cpus_allowed; @@ -902,22 +920,41 @@ static int powernowk8_target(struct cpufreq_policy *pol, unsigned targfreq, unsi data->currfid, data->currvid); if ((checkvid != data->currvid) || (checkfid != data->currfid)) { - printk(KERN_ERR PFX - "error - out of sync, fid 0x%x 0x%x, vid 0x%x 0x%x\n", - checkfid, data->currfid, checkvid, data->currvid); + printk(KERN_INFO PFX + "error - out of sync, fix 0x%x 0x%x, vid 0x%x 0x%x\n", + checkfid, data->currfid, checkvid, data->currvid); } if (cpufreq_frequency_table_target(pol, data->powernow_table, targfreq, relation, &newstate)) goto err_out; + down(&fidvid_sem); + + for_each_cpu_mask(i, cpu_core_map[pol->cpu]) { + /* make sure the sibling is initialized */ + if (!powernow_data[i]) { + ret = 0; + up(&fidvid_sem); + goto err_out; + } + } + powernow_k8_acpi_pst_values(data, newstate); if (transition_frequency(data, newstate)) { printk(KERN_ERR PFX "transition frequency failed\n"); ret = 1; + up(&fidvid_sem); goto err_out; } + /* Update all the fid/vids of our siblings */ + for_each_cpu_mask(i, cpu_core_map[pol->cpu]) { + powernow_data[i]->currvid = data->currvid; + powernow_data[i]->currfid = data->currfid; + } + up(&fidvid_sem); + pol->cur = find_khz_freq_from_fid(data->currfid); ret = 0; @@ -962,7 +999,7 @@ static int __init powernowk8_cpu_init(struct cpufreq_policy *pol) */ if ((num_online_cpus() != 1) || (num_possible_cpus() != 1)) { - printk(KERN_INFO PFX "MP systems not supported by PSB BIOS structure\n"); + printk(KERN_ERR PFX "MP systems not supported by PSB BIOS structure\n"); kfree(data); return -ENODEV; } @@ -1003,6 +1040,7 @@ static int __init powernowk8_cpu_init(struct cpufreq_policy *pol) schedule(); pol->governor = CPUFREQ_DEFAULT_GOVERNOR; + pol->cpus = cpu_core_map[pol->cpu]; /* Take a crude guess here. * That guess was in microseconds, so multiply with 1000 */ @@ -1069,7 +1107,7 @@ static unsigned int powernowk8_get (unsigned int cpu) return 0; } preempt_disable(); - + if (query_current_values_with_pending_wait(data)) goto out; @@ -1127,9 +1165,10 @@ static void __exit powernowk8_exit(void) cpufreq_unregister_driver(&cpufreq_amd64_driver); } -MODULE_AUTHOR("Paul Devriendt <paul.devriendt@amd.com>"); +MODULE_AUTHOR("Paul Devriendt <paul.devriendt@amd.com> and Mark Langsdorf <mark.langsdorf@amd.com."); MODULE_DESCRIPTION("AMD Athlon 64 and Opteron processor frequency driver."); MODULE_LICENSE("GPL"); late_initcall(powernowk8_init); module_exit(powernowk8_exit); + diff --git a/arch/i386/kernel/cpu/cpufreq/powernow-k8.h b/arch/i386/kernel/cpu/cpufreq/powernow-k8.h index 63ebc8470f5..9ed5bf221cb 100644 --- a/arch/i386/kernel/cpu/cpufreq/powernow-k8.h +++ b/arch/i386/kernel/cpu/cpufreq/powernow-k8.h @@ -174,3 +174,18 @@ static int core_voltage_post_transition(struct powernow_k8_data *data, u32 reqvi static int core_frequency_transition(struct powernow_k8_data *data, u32 reqfid); static void powernow_k8_acpi_pst_values(struct powernow_k8_data *data, unsigned int index); + +#ifndef for_each_cpu_mask +#define for_each_cpu_mask(i,mask) for (i=0;i<1;i++) +#endif + +#ifdef CONFIG_SMP +static inline void define_siblings(int cpu, cpumask_t cpu_sharedcore_mask[]) +{ +} +#else +static inline void define_siblings(int cpu, cpumask_t cpu_sharedcore_mask[]) +{ + cpu_set(0, cpu_sharedcore_mask[0]); +} +#endif diff --git a/arch/i386/kernel/cpu/cpufreq/sc520_freq.c b/arch/i386/kernel/cpu/cpufreq/sc520_freq.c new file mode 100644 index 00000000000..ef457d50f4a --- /dev/null +++ b/arch/i386/kernel/cpu/cpufreq/sc520_freq.c @@ -0,0 +1,186 @@ +/* + * sc520_freq.c: cpufreq driver for the AMD Elan sc520 + * + * Copyright (C) 2005 Sean Young <sean@mess.org> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + * + * Based on elanfreq.c + * + * 2005-03-30: - initial revision + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/init.h> + +#include <linux/delay.h> +#include <linux/cpufreq.h> + +#include <asm/msr.h> +#include <asm/timex.h> +#include <asm/io.h> + +#define MMCR_BASE 0xfffef000 /* The default base address */ +#define OFFS_CPUCTL 0x2 /* CPU Control Register */ + +static __u8 __iomem *cpuctl; + +#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, "sc520_freq", msg) + +static struct cpufreq_frequency_table sc520_freq_table[] = { + {0x01, 100000}, + {0x02, 133000}, + {0, CPUFREQ_TABLE_END}, +}; + +static unsigned int sc520_freq_get_cpu_frequency(unsigned int cpu) +{ + u8 clockspeed_reg = *cpuctl; + + switch (clockspeed_reg & 0x03) { + default: + printk(KERN_ERR "sc520_freq: error: cpuctl register has unexpected value %02x\n", clockspeed_reg); + case 0x01: + return 100000; + case 0x02: + return 133000; + } +} + +static void sc520_freq_set_cpu_state (unsigned int state) +{ + + struct cpufreq_freqs freqs; + u8 clockspeed_reg; + + freqs.old = sc520_freq_get_cpu_frequency(0); + freqs.new = sc520_freq_table[state].frequency; + freqs.cpu = 0; /* AMD Elan is UP */ + + cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); + + dprintk("attempting to set frequency to %i kHz\n", + sc520_freq_table[state].frequency); + + local_irq_disable(); + + clockspeed_reg = *cpuctl & ~0x03; + *cpuctl = clockspeed_reg | sc520_freq_table[state].index; + + local_irq_enable(); + + cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); +}; + +static int sc520_freq_verify (struct cpufreq_policy *policy) +{ + return cpufreq_frequency_table_verify(policy, &sc520_freq_table[0]); +} + +static int sc520_freq_target (struct cpufreq_policy *policy, + unsigned int target_freq, + unsigned int relation) +{ + unsigned int newstate = 0; + + if (cpufreq_frequency_table_target(policy, sc520_freq_table, target_freq, relation, &newstate)) + return -EINVAL; + + sc520_freq_set_cpu_state(newstate); + + return 0; +} + + +/* + * Module init and exit code + */ + +static int sc520_freq_cpu_init(struct cpufreq_policy *policy) +{ + struct cpuinfo_x86 *c = cpu_data; + int result; + + /* capability check */ + if (c->x86_vendor != X86_VENDOR_AMD || + c->x86 != 4 || c->x86_model != 9) + return -ENODEV; + + /* cpuinfo and default policy values */ + policy->governor = CPUFREQ_DEFAULT_GOVERNOR; + policy->cpuinfo.transition_latency = 1000000; /* 1ms */ + policy->cur = sc520_freq_get_cpu_frequency(0); + + result = cpufreq_frequency_table_cpuinfo(policy, sc520_freq_table); + if (result) + return (result); + + cpufreq_frequency_table_get_attr(sc520_freq_table, policy->cpu); + + return 0; +} + + +static int sc520_freq_cpu_exit(struct cpufreq_policy *policy) +{ + cpufreq_frequency_table_put_attr(policy->cpu); + return 0; +} + + +static struct freq_attr* sc520_freq_attr[] = { + &cpufreq_freq_attr_scaling_available_freqs, + NULL, +}; + + +static struct cpufreq_driver sc520_freq_driver = { + .get = sc520_freq_get_cpu_frequency, + .verify = sc520_freq_verify, + .target = sc520_freq_target, + .init = sc520_freq_cpu_init, + .exit = sc520_freq_cpu_exit, + .name = "sc520_freq", + .owner = THIS_MODULE, + .attr = sc520_freq_attr, +}; + + +static int __init sc520_freq_init(void) +{ + struct cpuinfo_x86 *c = cpu_data; + + /* Test if we have the right hardware */ + if(c->x86_vendor != X86_VENDOR_AMD || + c->x86 != 4 || c->x86_model != 9) { + dprintk("no Elan SC520 processor found!\n"); + return -ENODEV; + } + cpuctl = ioremap((unsigned long)(MMCR_BASE + OFFS_CPUCTL), 1); + if(!cpuctl) { + printk(KERN_ERR "sc520_freq: error: failed to remap memory\n"); + return -ENOMEM; + } + + return cpufreq_register_driver(&sc520_freq_driver); +} + + +static void __exit sc520_freq_exit(void) +{ + cpufreq_unregister_driver(&sc520_freq_driver); + iounmap(cpuctl); +} + + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Sean Young <sean@mess.org>"); +MODULE_DESCRIPTION("cpufreq driver for AMD's Elan sc520 CPU"); + +module_init(sc520_freq_init); +module_exit(sc520_freq_exit); + diff --git a/arch/i386/kernel/cpu/cpufreq/speedstep-centrino.c b/arch/i386/kernel/cpu/cpufreq/speedstep-centrino.c index 07d5612dc00..7dcbf70fc16 100644 --- a/arch/i386/kernel/cpu/cpufreq/speedstep-centrino.c +++ b/arch/i386/kernel/cpu/cpufreq/speedstep-centrino.c @@ -54,6 +54,8 @@ enum { CPU_DOTHAN_A1, CPU_DOTHAN_A2, CPU_DOTHAN_B0, + CPU_MP4HT_D0, + CPU_MP4HT_E0, }; static const struct cpu_id cpu_ids[] = { @@ -61,6 +63,8 @@ static const struct cpu_id cpu_ids[] = { [CPU_DOTHAN_A1] = { 6, 13, 1 }, [CPU_DOTHAN_A2] = { 6, 13, 2 }, [CPU_DOTHAN_B0] = { 6, 13, 6 }, + [CPU_MP4HT_D0] = {15, 3, 4 }, + [CPU_MP4HT_E0] = {15, 4, 1 }, }; #define N_IDS (sizeof(cpu_ids)/sizeof(cpu_ids[0])) @@ -226,6 +230,8 @@ static struct cpu_model models[] = { &cpu_ids[CPU_DOTHAN_A1], NULL, 0, NULL }, { &cpu_ids[CPU_DOTHAN_A2], NULL, 0, NULL }, { &cpu_ids[CPU_DOTHAN_B0], NULL, 0, NULL }, + { &cpu_ids[CPU_MP4HT_D0], NULL, 0, NULL }, + { &cpu_ids[CPU_MP4HT_E0], NULL, 0, NULL }, { NULL, } }; diff --git a/arch/i386/kernel/cpu/cpufreq/speedstep-lib.c b/arch/i386/kernel/cpu/cpufreq/speedstep-lib.c index 8ba430a9c3a..d368b3f5fce 100644 --- a/arch/i386/kernel/cpu/cpufreq/speedstep-lib.c +++ b/arch/i386/kernel/cpu/cpufreq/speedstep-lib.c @@ -336,7 +336,7 @@ unsigned int speedstep_get_freqs(unsigned int processor, if (!prev_speed) return -EIO; - dprintk("previous seped is %u\n", prev_speed); + dprintk("previous speed is %u\n", prev_speed); local_irq_save(flags); @@ -348,7 +348,7 @@ unsigned int speedstep_get_freqs(unsigned int processor, goto out; } - dprintk("low seped is %u\n", *low_speed); + dprintk("low speed is %u\n", *low_speed); /* switch to high state */ set_state(SPEEDSTEP_HIGH); @@ -358,7 +358,7 @@ unsigned int speedstep_get_freqs(unsigned int processor, goto out; } - dprintk("high seped is %u\n", *high_speed); + dprintk("high speed is %u\n", *high_speed); if (*low_speed == *high_speed) { ret = -ENODEV; diff --git a/arch/i386/kernel/cpu/cpufreq/speedstep-smi.c b/arch/i386/kernel/cpu/cpufreq/speedstep-smi.c index 79440b3f087..b25fb6b635a 100644 --- a/arch/i386/kernel/cpu/cpufreq/speedstep-smi.c +++ b/arch/i386/kernel/cpu/cpufreq/speedstep-smi.c @@ -357,6 +357,9 @@ static int __init speedstep_init(void) case SPEEDSTEP_PROCESSOR_PIII_C: case SPEEDSTEP_PROCESSOR_PIII_C_EARLY: break; + case SPEEDSTEP_PROCESSOR_P4M: + printk(KERN_INFO "speedstep-smi: you're trying to use this cpufreq driver on a Pentium 4-based CPU. Most likely it will not work.\n"); + break; default: speedstep_processor = 0; } diff --git a/arch/i386/kernel/cpu/intel_cacheinfo.c b/arch/i386/kernel/cpu/intel_cacheinfo.c index aeb5b4ef8c8..a710dc4eb20 100644 --- a/arch/i386/kernel/cpu/intel_cacheinfo.c +++ b/arch/i386/kernel/cpu/intel_cacheinfo.c @@ -118,7 +118,7 @@ struct _cpuid4_info { }; #define MAX_CACHE_LEAVES 4 -static unsigned short __devinitdata num_cache_leaves; +static unsigned short num_cache_leaves; static int __devinit cpuid4_cache_lookup(int index, struct _cpuid4_info *this_leaf) { diff --git a/arch/i386/kernel/setup.c b/arch/i386/kernel/setup.c index 945ec73163c..2bfbddebdbf 100644 --- a/arch/i386/kernel/setup.c +++ b/arch/i386/kernel/setup.c @@ -1502,11 +1502,13 @@ void __init setup_arch(char **cmdline_p) if (efi_enabled) efi_map_memmap(); +#ifdef CONFIG_ACPI_BOOT /* * Parse the ACPI tables for possible boot-time SMP configuration. */ acpi_boot_table_init(); acpi_boot_init(); +#endif #ifdef CONFIG_X86_LOCAL_APIC if (smp_found_config) diff --git a/arch/i386/kernel/smpboot.c b/arch/i386/kernel/smpboot.c index 35bfe138cb1..bc1bb6919e6 100644 --- a/arch/i386/kernel/smpboot.c +++ b/arch/i386/kernel/smpboot.c @@ -1074,8 +1074,10 @@ static void __init smp_boot_cpus(unsigned int max_cpus) cpu_set(cpu, cpu_sibling_map[cpu]); } - if (siblings != smp_num_siblings) + if (siblings != smp_num_siblings) { printk(KERN_WARNING "WARNING: %d siblings found for CPU%d, should be %d\n", siblings, cpu, smp_num_siblings); + smp_num_siblings = siblings; + } if (c->x86_num_cores > 1) { for (i = 0; i < NR_CPUS; i++) { diff --git a/arch/i386/kernel/timers/common.c b/arch/i386/kernel/timers/common.c index f7f90005e22..8e201219f52 100644 --- a/arch/i386/kernel/timers/common.c +++ b/arch/i386/kernel/timers/common.c @@ -6,6 +6,7 @@ #include <linux/timex.h> #include <linux/errno.h> #include <linux/jiffies.h> +#include <linux/module.h> #include <asm/io.h> #include <asm/timer.h> @@ -24,7 +25,7 @@ #define CALIBRATE_TIME (5 * 1000020/HZ) -unsigned long __init calibrate_tsc(void) +unsigned long calibrate_tsc(void) { mach_prepare_counter(); @@ -139,7 +140,7 @@ bad_calibration: #endif /* calculate cpu_khz */ -void __init init_cpu_khz(void) +void init_cpu_khz(void) { if (cpu_has_tsc) { unsigned long tsc_quotient = calibrate_tsc(); @@ -158,3 +159,4 @@ void __init init_cpu_khz(void) } } } + diff --git a/arch/i386/kernel/timers/timer_tsc.c b/arch/i386/kernel/timers/timer_tsc.c index 7926d967be0..180444d8782 100644 --- a/arch/i386/kernel/timers/timer_tsc.c +++ b/arch/i386/kernel/timers/timer_tsc.c @@ -320,6 +320,26 @@ core_initcall(cpufreq_tsc); static inline void cpufreq_delayed_get(void) { return; } #endif +int recalibrate_cpu_khz(void) +{ +#ifndef CONFIG_SMP + unsigned long cpu_khz_old = cpu_khz; + + if (cpu_has_tsc) { + init_cpu_khz(); + cpu_data[0].loops_per_jiffy = + cpufreq_scale(cpu_data[0].loops_per_jiffy, + cpu_khz_old, + cpu_khz); + return 0; + } else + return -ENODEV; +#else + return -ENODEV; +#endif +} +EXPORT_SYMBOL(recalibrate_cpu_khz); + static void mark_offset_tsc(void) { unsigned long lost,delay; diff --git a/arch/ia64/ia32/sys_ia32.c b/arch/ia64/ia32/sys_ia32.c index 247a21c64ae..c1e20d65dd6 100644 --- a/arch/ia64/ia32/sys_ia32.c +++ b/arch/ia64/ia32/sys_ia32.c @@ -2427,7 +2427,7 @@ sys32_epoll_wait(int epfd, struct epoll_event32 __user * events, int maxevents, { struct epoll_event *events64 = NULL; mm_segment_t old_fs = get_fs(); - int error, numevents, size; + int numevents, size; int evt_idx; int do_free_pages = 0; diff --git a/arch/ia64/kernel/entry.S b/arch/ia64/kernel/entry.S index 81c45d44739..d99316c9be2 100644 --- a/arch/ia64/kernel/entry.S +++ b/arch/ia64/kernel/entry.S @@ -1182,7 +1182,7 @@ ENTRY(notify_resume_user) ;; (pNonSys) mov out2=0 // out2==0 => not a syscall .fframe 16 - .spillpsp ar.unat, 16 // (note that offset is relative to psp+0x10!) + .spillsp ar.unat, 16 st8 [sp]=r9,-16 // allocate space for ar.unat and save it st8 [out1]=loc1,-8 // save ar.pfs, out1=&sigscratch .body @@ -1208,7 +1208,7 @@ GLOBAL_ENTRY(sys_rt_sigsuspend) adds out2=8,sp // out2=&sigscratch->ar_pfs ;; .fframe 16 - .spillpsp ar.unat, 16 // (note that offset is relative to psp+0x10!) + .spillsp ar.unat, 16 st8 [sp]=r9,-16 // allocate space for ar.unat and save it st8 [out2]=loc1,-8 // save ar.pfs, out2=&sigscratch .body diff --git a/arch/ia64/kernel/mca.c b/arch/ia64/kernel/mca.c index 4d6c7b8f667..736e328b5e6 100644 --- a/arch/ia64/kernel/mca.c +++ b/arch/ia64/kernel/mca.c @@ -1103,8 +1103,6 @@ ia64_mca_cpe_int_caller(int cpe_irq, void *arg, struct pt_regs *ptregs) return IRQ_HANDLED; } -#endif /* CONFIG_ACPI */ - /* * ia64_mca_cpe_poll * @@ -1122,6 +1120,8 @@ ia64_mca_cpe_poll (unsigned long dummy) platform_send_ipi(first_cpu(cpu_online_map), IA64_CPEP_VECTOR, IA64_IPI_DM_INT, 0); } +#endif /* CONFIG_ACPI */ + /* * C portion of the OS INIT handler * @@ -1390,8 +1390,7 @@ ia64_mca_init(void) register_percpu_irq(IA64_MCA_WAKEUP_VECTOR, &mca_wkup_irqaction); #ifdef CONFIG_ACPI - /* Setup the CPEI/P vector and handler */ - cpe_vector = acpi_request_vector(ACPI_INTERRUPT_CPEI); + /* Setup the CPEI/P handler */ register_percpu_irq(IA64_CPEP_VECTOR, &mca_cpep_irqaction); #endif @@ -1436,6 +1435,7 @@ ia64_mca_late_init(void) #ifdef CONFIG_ACPI /* Setup the CPEI/P vector and handler */ + cpe_vector = acpi_request_vector(ACPI_INTERRUPT_CPEI); init_timer(&cpe_poll_timer); cpe_poll_timer.function = ia64_mca_cpe_poll; diff --git a/arch/ia64/kernel/minstate.h b/arch/ia64/kernel/minstate.h index 1dbc7b2497c..f6d8a010d99 100644 --- a/arch/ia64/kernel/minstate.h +++ b/arch/ia64/kernel/minstate.h @@ -41,7 +41,7 @@ (pKStk) addl r3=THIS_CPU(ia64_mca_data),r3;; \ (pKStk) ld8 r3 = [r3];; \ (pKStk) addl r3=IA64_MCA_CPU_INIT_STACK_OFFSET,r3;; \ -(pKStk) addl sp=IA64_STK_OFFSET-IA64_PT_REGS_SIZE,r3; \ +(pKStk) addl r1=IA64_STK_OFFSET-IA64_PT_REGS_SIZE,r3; \ (pUStk) mov ar.rsc=0; /* set enforced lazy mode, pl 0, little-endian, loadrs=0 */ \ (pUStk) addl r22=IA64_RBS_OFFSET,r1; /* compute base of register backing store */ \ ;; \ @@ -50,7 +50,6 @@ (pUStk) mov r23=ar.bspstore; /* save ar.bspstore */ \ (pUStk) dep r22=-1,r22,61,3; /* compute kernel virtual addr of RBS */ \ ;; \ -(pKStk) addl r1=-IA64_PT_REGS_SIZE,r1; /* if in kernel mode, use sp (r12) */ \ (pUStk) mov ar.bspstore=r22; /* switch to kernel RBS */ \ ;; \ (pUStk) mov r18=ar.bsp; \ diff --git a/arch/ia64/kernel/perfmon.c b/arch/ia64/kernel/perfmon.c index 71c101601e3..6407bff6bfd 100644 --- a/arch/ia64/kernel/perfmon.c +++ b/arch/ia64/kernel/perfmon.c @@ -11,7 +11,7 @@ * Version Perfmon-2.x is a rewrite of perfmon-1.x * by Stephane Eranian, Hewlett Packard Co. * - * Copyright (C) 1999-2003, 2005 Hewlett Packard Co + * Copyright (C) 1999-2005 Hewlett Packard Co * Stephane Eranian <eranian@hpl.hp.com> * David Mosberger-Tang <davidm@hpl.hp.com> * @@ -497,6 +497,9 @@ typedef struct { static pfm_stats_t pfm_stats[NR_CPUS]; static pfm_session_t pfm_sessions; /* global sessions information */ +static spinlock_t pfm_alt_install_check = SPIN_LOCK_UNLOCKED; +static pfm_intr_handler_desc_t *pfm_alt_intr_handler; + static struct proc_dir_entry *perfmon_dir; static pfm_uuid_t pfm_null_uuid = {0,}; @@ -606,6 +609,7 @@ DEFINE_PER_CPU(unsigned long, pfm_syst_info); DEFINE_PER_CPU(struct task_struct *, pmu_owner); DEFINE_PER_CPU(pfm_context_t *, pmu_ctx); DEFINE_PER_CPU(unsigned long, pmu_activation_number); +EXPORT_PER_CPU_SYMBOL_GPL(pfm_syst_info); /* forward declaration */ @@ -1325,7 +1329,7 @@ pfm_reserve_session(struct task_struct *task, int is_syswide, unsigned int cpu) error_conflict: DPRINT(("system wide not possible, conflicting session [%d] on CPU%d\n", pfm_sessions.pfs_sys_session[cpu]->pid, - smp_processor_id())); + cpu)); abort: UNLOCK_PFS(flags); @@ -5555,26 +5559,32 @@ pfm_interrupt_handler(int irq, void *arg, struct pt_regs *regs) int ret; this_cpu = get_cpu(); - min = pfm_stats[this_cpu].pfm_ovfl_intr_cycles_min; - max = pfm_stats[this_cpu].pfm_ovfl_intr_cycles_max; + if (likely(!pfm_alt_intr_handler)) { + min = pfm_stats[this_cpu].pfm_ovfl_intr_cycles_min; + max = pfm_stats[this_cpu].pfm_ovfl_intr_cycles_max; - start_cycles = ia64_get_itc(); + start_cycles = ia64_get_itc(); - ret = pfm_do_interrupt_handler(irq, arg, regs); + ret = pfm_do_interrupt_handler(irq, arg, regs); - total_cycles = ia64_get_itc(); + total_cycles = ia64_get_itc(); - /* - * don't measure spurious interrupts - */ - if (likely(ret == 0)) { - total_cycles -= start_cycles; + /* + * don't measure spurious interrupts + */ + if (likely(ret == 0)) { + total_cycles -= start_cycles; - if (total_cycles < min) pfm_stats[this_cpu].pfm_ovfl_intr_cycles_min = total_cycles; - if (total_cycles > max) pfm_stats[this_cpu].pfm_ovfl_intr_cycles_max = total_cycles; + if (total_cycles < min) pfm_stats[this_cpu].pfm_ovfl_intr_cycles_min = total_cycles; + if (total_cycles > max) pfm_stats[this_cpu].pfm_ovfl_intr_cycles_max = total_cycles; - pfm_stats[this_cpu].pfm_ovfl_intr_cycles += total_cycles; + pfm_stats[this_cpu].pfm_ovfl_intr_cycles += total_cycles; + } + } + else { + (*pfm_alt_intr_handler->handler)(irq, arg, regs); } + put_cpu_no_resched(); return IRQ_HANDLED; } @@ -6425,6 +6435,141 @@ static struct irqaction perfmon_irqaction = { .name = "perfmon" }; +static void +pfm_alt_save_pmu_state(void *data) +{ + struct pt_regs *regs; + + regs = ia64_task_regs(current); + + DPRINT(("called\n")); + + /* + * should not be necessary but + * let's take not risk + */ + pfm_clear_psr_up(); + pfm_clear_psr_pp(); + ia64_psr(regs)->pp = 0; + + /* + * This call is required + * May cause a spurious interrupt on some processors + */ + pfm_freeze_pmu(); + + ia64_srlz_d(); +} + +void +pfm_alt_restore_pmu_state(void *data) +{ + struct pt_regs *regs; + + regs = ia64_task_regs(current); + + DPRINT(("called\n")); + + /* + * put PMU back in state expected + * by perfmon + */ + pfm_clear_psr_up(); + pfm_clear_psr_pp(); + ia64_psr(regs)->pp = 0; + + /* + * perfmon runs with PMU unfrozen at all times + */ + pfm_unfreeze_pmu(); + + ia64_srlz_d(); +} + +int +pfm_install_alt_pmu_interrupt(pfm_intr_handler_desc_t *hdl) +{ + int ret, i; + int reserve_cpu; + + /* some sanity checks */ + if (hdl == NULL || hdl->handler == NULL) return -EINVAL; + + /* do the easy test first */ + if (pfm_alt_intr_handler) return -EBUSY; + + /* one at a time in the install or remove, just fail the others */ + if (!spin_trylock(&pfm_alt_install_check)) { + return -EBUSY; + } + + /* reserve our session */ + for_each_online_cpu(reserve_cpu) { + ret = pfm_reserve_session(NULL, 1, reserve_cpu); + if (ret) goto cleanup_reserve; + } + + /* save the current system wide pmu states */ + ret = on_each_cpu(pfm_alt_save_pmu_state, NULL, 0, 1); + if (ret) { + DPRINT(("on_each_cpu() failed: %d\n", ret)); + goto cleanup_reserve; + } + + /* officially change to the alternate interrupt handler */ + pfm_alt_intr_handler = hdl; + + spin_unlock(&pfm_alt_install_check); + + return 0; + +cleanup_reserve: + for_each_online_cpu(i) { + /* don't unreserve more than we reserved */ + if (i >= reserve_cpu) break; + + pfm_unreserve_session(NULL, 1, i); + } + + spin_unlock(&pfm_alt_install_check); + + return ret; +} +EXPORT_SYMBOL_GPL(pfm_install_alt_pmu_interrupt); + +int +pfm_remove_alt_pmu_interrupt(pfm_intr_handler_desc_t *hdl) +{ + int i; + int ret; + + if (hdl == NULL) return -EINVAL; + + /* cannot remove someone else's handler! */ + if (pfm_alt_intr_handler != hdl) return -EINVAL; + + /* one at a time in the install or remove, just fail the others */ + if (!spin_trylock(&pfm_alt_install_check)) { + return -EBUSY; + } + + pfm_alt_intr_handler = NULL; + + ret = on_each_cpu(pfm_alt_restore_pmu_state, NULL, 0, 1); + if (ret) { + DPRINT(("on_each_cpu() failed: %d\n", ret)); + } + + for_each_online_cpu(i) { + pfm_unreserve_session(NULL, 1, i); + } + + spin_unlock(&pfm_alt_install_check); + + return 0; +} +EXPORT_SYMBOL_GPL(pfm_remove_alt_pmu_interrupt); + /* * perfmon initialization routine, called from the initcall() table */ diff --git a/arch/ia64/kernel/ptrace.c b/arch/ia64/kernel/ptrace.c index 907464ee727..08c8a5eb25a 100644 --- a/arch/ia64/kernel/ptrace.c +++ b/arch/ia64/kernel/ptrace.c @@ -692,16 +692,30 @@ convert_to_non_syscall (struct task_struct *child, struct pt_regs *pt, unsigned long cfm) { struct unw_frame_info info, prev_info; - unsigned long ip, pr; + unsigned long ip, sp, pr; unw_init_from_blocked_task(&info, child); while (1) { prev_info = info; if (unw_unwind(&info) < 0) return; - if (unw_get_rp(&info, &ip) < 0) + + unw_get_sp(&info, &sp); + if ((long)((unsigned long)child + IA64_STK_OFFSET - sp) + < IA64_PT_REGS_SIZE) { + dprintk("ptrace.%s: ran off the top of the kernel " + "stack\n", __FUNCTION__); + return; + } + if (unw_get_pr (&prev_info, &pr) < 0) { + unw_get_rp(&prev_info, &ip); + dprintk("ptrace.%s: failed to read " + "predicate register (ip=0x%lx)\n", + __FUNCTION__, ip); return; - if (ip < FIXADDR_USER_END) + } + if (unw_is_intr_frame(&info) + && (pr & (1UL << PRED_USER_STACK))) break; } diff --git a/arch/ia64/kernel/smpboot.c b/arch/ia64/kernel/smpboot.c index 0d5ee57c986..3865f088ffa 100644 --- a/arch/ia64/kernel/smpboot.c +++ b/arch/ia64/kernel/smpboot.c @@ -624,7 +624,7 @@ static struct { __u16 thread_id; __u16 proc_fixed_addr; __u8 valid; -}mt_info[NR_CPUS] __devinit; +} mt_info[NR_CPUS] __devinitdata; #ifdef CONFIG_HOTPLUG_CPU static inline void diff --git a/arch/ia64/kernel/sys_ia64.c b/arch/ia64/kernel/sys_ia64.c index a8cf6d8a509..770fab37928 100644 --- a/arch/ia64/kernel/sys_ia64.c +++ b/arch/ia64/kernel/sys_ia64.c @@ -182,13 +182,6 @@ do_mmap2 (unsigned long addr, unsigned long len, int prot, int flags, int fd, un } } - /* - * A zero mmap always succeeds in Linux, independent of whether or not the - * remaining arguments are valid. - */ - if (len == 0) - goto out; - /* Careful about overflows.. */ len = PAGE_ALIGN(len); if (!len || len > TASK_SIZE) { diff --git a/arch/ia64/sn/kernel/setup.c b/arch/ia64/sn/kernel/setup.c index 4fb44984afe..e64cb8175f7 100644 --- a/arch/ia64/sn/kernel/setup.c +++ b/arch/ia64/sn/kernel/setup.c @@ -271,6 +271,8 @@ void __init sn_setup(char **cmdline_p) int major = sn_sal_rev_major(), minor = sn_sal_rev_minor(); extern void sn_cpu_init(void); + ia64_sn_plat_set_error_handling_features(); + /* * If the generic code has enabled vga console support - lets * get rid of it again. This is a kludge for the fact that ACPI diff --git a/arch/ppc/Kconfig b/arch/ppc/Kconfig index 600f23d7fd3..6e6377a69d5 100644 --- a/arch/ppc/Kconfig +++ b/arch/ppc/Kconfig @@ -1143,12 +1143,12 @@ config PCI_QSPAN config PCI_8260 bool - depends on PCI && 8260 && !8272 + depends on PCI && 8260 default y config 8260_PCI9 bool " Enable workaround for MPC826x erratum PCI 9" - depends on PCI_8260 + depends on PCI_8260 && !ADS8272 default y choice diff --git a/arch/ppc/boot/images/Makefile b/arch/ppc/boot/images/Makefile index f850fb0fb51..c9ac5f5fa9e 100644 --- a/arch/ppc/boot/images/Makefile +++ b/arch/ppc/boot/images/Makefile @@ -22,7 +22,8 @@ targets += uImage $(obj)/uImage: $(obj)/vmlinux.gz $(Q)rm -f $@ $(call if_changed,uimage) - @echo ' Image: $@' $(if $(wildcard $@),'is ready','not made') + @echo -n ' Image: $@ ' + @if [ -f $@ ]; then echo 'is ready' ; else echo 'not made'; fi # Files generated that shall be removed upon make clean clean-files := sImage vmapus vmlinux* miboot* zImage* uImage diff --git a/arch/ppc/configs/mpc8555_cds_defconfig b/arch/ppc/configs/mpc8555_cds_defconfig index 728bd9e1a8f..15abebf46b9 100644 --- a/arch/ppc/configs/mpc8555_cds_defconfig +++ b/arch/ppc/configs/mpc8555_cds_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.11-rc1 -# Thu Jan 20 01:25:35 2005 +# Linux kernel version: 2.6.12-rc4 +# Tue May 17 11:56:01 2005 # CONFIG_MMU=y CONFIG_GENERIC_HARDIRQS=y @@ -11,6 +11,7 @@ CONFIG_HAVE_DEC_LOCK=y CONFIG_PPC=y CONFIG_PPC32=y CONFIG_GENERIC_NVRAM=y +CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y # # Code maturity level options @@ -18,6 +19,7 @@ CONFIG_GENERIC_NVRAM=y CONFIG_EXPERIMENTAL=y CONFIG_CLEAN_COMPILE=y CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 # # General setup @@ -29,12 +31,14 @@ CONFIG_SYSVIPC=y # CONFIG_BSD_PROCESS_ACCT is not set CONFIG_SYSCTL=y # CONFIG_AUDIT is not set -CONFIG_LOG_BUF_SHIFT=14 # CONFIG_HOTPLUG is not set CONFIG_KOBJECT_UEVENT=y # CONFIG_IKCONFIG is not set CONFIG_EMBEDDED=y # CONFIG_KALLSYMS is not set +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_BASE_FULL=y CONFIG_FUTEX=y # CONFIG_EPOLL is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set @@ -44,6 +48,7 @@ CONFIG_CC_ALIGN_LABELS=0 CONFIG_CC_ALIGN_LOOPS=0 CONFIG_CC_ALIGN_JUMPS=0 # CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 # # Loadable module support @@ -62,10 +67,12 @@ CONFIG_CC_ALIGN_JUMPS=0 CONFIG_E500=y CONFIG_BOOKE=y CONFIG_FSL_BOOKE=y +# CONFIG_PHYS_64BIT is not set CONFIG_SPE=y CONFIG_MATH_EMULATION=y # CONFIG_CPU_FREQ is not set CONFIG_PPC_GEN550=y +# CONFIG_PM is not set CONFIG_85xx=y CONFIG_PPC_INDIRECT_PCI_BE=y @@ -76,6 +83,7 @@ CONFIG_PPC_INDIRECT_PCI_BE=y CONFIG_MPC8555_CDS=y # CONFIG_MPC8560_ADS is not set # CONFIG_SBC8560 is not set +# CONFIG_STX_GP3 is not set CONFIG_MPC8555=y CONFIG_85xx_PCI2=y @@ -90,6 +98,7 @@ CONFIG_CPM2=y CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set # CONFIG_CMDLINE_BOOL is not set +CONFIG_ISA_DMA_API=y # # Bus options @@ -105,10 +114,6 @@ CONFIG_PCI_NAMES=y # CONFIG_PCCARD is not set # -# PC-card bridges -# - -# # Advanced setup # # CONFIG_ADVANCED_OPTIONS is not set @@ -180,7 +185,59 @@ CONFIG_IOSCHED_CFQ=y # # ATA/ATAPI/MFM/RLL support # -# CONFIG_IDE is not set +CONFIG_IDE=y +CONFIG_BLK_DEV_IDE=y + +# +# Please see Documentation/ide.txt for help/info on IDE drives +# +# CONFIG_BLK_DEV_IDE_SATA is not set +CONFIG_BLK_DEV_IDEDISK=y +# CONFIG_IDEDISK_MULTI_MODE is not set +# CONFIG_BLK_DEV_IDECD is not set +# CONFIG_BLK_DEV_IDETAPE is not set +# CONFIG_BLK_DEV_IDEFLOPPY is not set +# CONFIG_IDE_TASK_IOCTL is not set + +# +# IDE chipset support/bugfixes +# +CONFIG_IDE_GENERIC=y +CONFIG_BLK_DEV_IDEPCI=y +CONFIG_IDEPCI_SHARE_IRQ=y +# CONFIG_BLK_DEV_OFFBOARD is not set +CONFIG_BLK_DEV_GENERIC=y +# CONFIG_BLK_DEV_OPTI621 is not set +# CONFIG_BLK_DEV_SL82C105 is not set +CONFIG_BLK_DEV_IDEDMA_PCI=y +# CONFIG_BLK_DEV_IDEDMA_FORCED is not set +CONFIG_IDEDMA_PCI_AUTO=y +# CONFIG_IDEDMA_ONLYDISK is not set +# CONFIG_BLK_DEV_AEC62XX is not set +# CONFIG_BLK_DEV_ALI15X3 is not set +# CONFIG_BLK_DEV_AMD74XX is not set +# CONFIG_BLK_DEV_CMD64X is not set +# CONFIG_BLK_DEV_TRIFLEX is not set +# CONFIG_BLK_DEV_CY82C693 is not set +# CONFIG_BLK_DEV_CS5520 is not set +# CONFIG_BLK_DEV_CS5530 is not set +# CONFIG_BLK_DEV_HPT34X is not set +# CONFIG_BLK_DEV_HPT366 is not set +# CONFIG_BLK_DEV_SC1200 is not set +# CONFIG_BLK_DEV_PIIX is not set +# CONFIG_BLK_DEV_NS87415 is not set +# CONFIG_BLK_DEV_PDC202XX_OLD is not set +# CONFIG_BLK_DEV_PDC202XX_NEW is not set +# CONFIG_BLK_DEV_SVWKS is not set +# CONFIG_BLK_DEV_SIIMAGE is not set +# CONFIG_BLK_DEV_SLC90E66 is not set +# CONFIG_BLK_DEV_TRM290 is not set +CONFIG_BLK_DEV_VIA82CXXX=y +# CONFIG_IDE_ARM is not set +CONFIG_BLK_DEV_IDEDMA=y +# CONFIG_IDEDMA_IVB is not set +CONFIG_IDEDMA_AUTO=y +# CONFIG_BLK_DEV_HD is not set # # SCSI device support @@ -220,7 +277,6 @@ CONFIG_NET=y # CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set -# CONFIG_NETLINK_DEV is not set CONFIG_UNIX=y # CONFIG_NET_KEY is not set CONFIG_INET=y @@ -370,14 +426,6 @@ CONFIG_INPUT=y # CONFIG_INPUT_EVBUG is not set # -# Input I/O drivers -# -# CONFIG_GAMEPORT is not set -CONFIG_SOUND_GAMEPORT=y -# CONFIG_SERIO is not set -# CONFIG_SERIO_I8042 is not set - -# # Input Device Drivers # # CONFIG_INPUT_KEYBOARD is not set @@ -387,6 +435,13 @@ CONFIG_SOUND_GAMEPORT=y # CONFIG_INPUT_MISC is not set # +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set +CONFIG_SOUND_GAMEPORT=y + +# # Character devices # # CONFIG_VT is not set @@ -406,6 +461,7 @@ CONFIG_SERIAL_8250_NR_UARTS=4 CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_CPM is not set +# CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 @@ -434,6 +490,11 @@ CONFIG_GEN_RTC=y # CONFIG_RAW_DRIVER is not set # +# TPM devices +# +# CONFIG_TCG_TPM is not set + +# # I2C support # CONFIG_I2C=y @@ -456,11 +517,11 @@ CONFIG_I2C_CHARDEV=y # CONFIG_I2C_AMD8111 is not set # CONFIG_I2C_I801 is not set # CONFIG_I2C_I810 is not set +# CONFIG_I2C_PIIX4 is not set # CONFIG_I2C_ISA is not set CONFIG_I2C_MPC=y # CONFIG_I2C_NFORCE2 is not set # CONFIG_I2C_PARPORT_LIGHT is not set -# CONFIG_I2C_PIIX4 is not set # CONFIG_I2C_PROSAVAGE is not set # CONFIG_I2C_SAVAGE4 is not set # CONFIG_SCx200_ACB is not set @@ -483,7 +544,9 @@ CONFIG_I2C_MPC=y # CONFIG_SENSORS_ASB100 is not set # CONFIG_SENSORS_DS1621 is not set # CONFIG_SENSORS_FSCHER is not set +# CONFIG_SENSORS_FSCPOS is not set # CONFIG_SENSORS_GL518SM is not set +# CONFIG_SENSORS_GL520SM is not set # CONFIG_SENSORS_IT87 is not set # CONFIG_SENSORS_LM63 is not set # CONFIG_SENSORS_LM75 is not set @@ -494,9 +557,11 @@ CONFIG_I2C_MPC=y # CONFIG_SENSORS_LM85 is not set # CONFIG_SENSORS_LM87 is not set # CONFIG_SENSORS_LM90 is not set +# CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_PC87360 is not set # CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_SIS5595 is not set # CONFIG_SENSORS_SMSC47M1 is not set # CONFIG_SENSORS_VIA686A is not set # CONFIG_SENSORS_W83781D is not set @@ -506,10 +571,12 @@ CONFIG_I2C_MPC=y # # Other I2C Chip support # +# CONFIG_SENSORS_DS1337 is not set # CONFIG_SENSORS_EEPROM is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_RTC8564 is not set +# CONFIG_SENSORS_M41T00 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set @@ -538,7 +605,6 @@ CONFIG_I2C_MPC=y # Graphics support # # CONFIG_FB is not set -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set # # Sound @@ -548,13 +614,9 @@ CONFIG_I2C_MPC=y # # USB support # -# CONFIG_USB is not set CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y - -# -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information -# +# CONFIG_USB is not set # # USB Gadget Support @@ -585,6 +647,10 @@ CONFIG_JBD=y CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set + +# +# XFS support +# # CONFIG_XFS_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set @@ -646,7 +712,6 @@ CONFIG_NFS_FS=y # CONFIG_NFSD is not set CONFIG_ROOT_NFS=y CONFIG_LOCKD=y -# CONFIG_EXPORTFS is not set CONFIG_SUNRPC=y # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set @@ -698,7 +763,9 @@ CONFIG_CRC32=y # # Kernel hacking # +# CONFIG_PRINTK_TIME is not set # CONFIG_DEBUG_KERNEL is not set +CONFIG_LOG_BUF_SHIFT=14 # CONFIG_KGDB_CONSOLE is not set # CONFIG_SERIAL_TEXT_DEBUG is not set diff --git a/arch/ppc/kernel/head_fsl_booke.S b/arch/ppc/kernel/head_fsl_booke.S index f22ddce3613..ce36e88ba62 100644 --- a/arch/ppc/kernel/head_fsl_booke.S +++ b/arch/ppc/kernel/head_fsl_booke.S @@ -232,7 +232,8 @@ skpinv: addi r6,r6,1 /* Increment */ tlbwe /* 7. Jump to KERNELBASE mapping */ - li r7,0 + lis r7,MSR_KERNEL@h + ori r7,r7,MSR_KERNEL@l bl 1f /* Find our address */ 1: mflr r9 rlwimi r6,r9,0,20,31 @@ -293,6 +294,18 @@ skpinv: addi r6,r6,1 /* Increment */ mtspr SPRN_HID0, r2 #endif +#if !defined(CONFIG_BDI_SWITCH) + /* + * The Abatron BDI JTAG debugger does not tolerate others + * mucking with the debug registers. + */ + lis r2,DBCR0_IDM@h + mtspr SPRN_DBCR0,r2 + /* clear any residual debug events */ + li r2,-1 + mtspr SPRN_DBSR,r2 +#endif + /* * This is where the main kernel code starts. */ diff --git a/arch/ppc/kernel/traps.c b/arch/ppc/kernel/traps.c index f8e7e324a17..c65731e8bc6 100644 --- a/arch/ppc/kernel/traps.c +++ b/arch/ppc/kernel/traps.c @@ -408,12 +408,7 @@ static int emulate_string_inst(struct pt_regs *regs, u32 instword) /* Early out if we are an invalid form of lswx */ if ((instword & INST_STRING_MASK) == INST_LSWX) - if ((rA >= rT) || (NB_RB >= rT) || (rT == rA) || (rT == NB_RB)) - return -EINVAL; - - /* Early out if we are an invalid form of lswi */ - if ((instword & INST_STRING_MASK) == INST_LSWI) - if ((rA >= rT) || (rT == rA)) + if ((rT == rA) || (rT == NB_RB)) return -EINVAL; EA = (rA == 0) ? 0 : regs->gpr[rA]; diff --git a/arch/ppc/platforms/83xx/mpc834x_sys.c b/arch/ppc/platforms/83xx/mpc834x_sys.c index b3b0f51979d..e6348b5a1dd 100644 --- a/arch/ppc/platforms/83xx/mpc834x_sys.c +++ b/arch/ppc/platforms/83xx/mpc834x_sys.c @@ -127,7 +127,6 @@ mpc834x_sys_map_io(void) { /* we steal the lowest ioremap addr for virt space */ io_block_mapping(VIRT_IMMRBAR, immrbar, 1024*1024, _PAGE_IO); - io_block_mapping(BCSR_VIRT_ADDR, BCSR_PHYS_ADDR, BCSR_SIZE, _PAGE_IO); } int diff --git a/arch/ppc/platforms/83xx/mpc834x_sys.h b/arch/ppc/platforms/83xx/mpc834x_sys.h index f4d055ae19c..a2f6e49d715 100644 --- a/arch/ppc/platforms/83xx/mpc834x_sys.h +++ b/arch/ppc/platforms/83xx/mpc834x_sys.h @@ -26,9 +26,14 @@ #define VIRT_IMMRBAR ((uint)0xfe000000) #define BCSR_PHYS_ADDR ((uint)0xf8000000) -#define BCSR_VIRT_ADDR ((uint)0xfe100000) #define BCSR_SIZE ((uint)(32 * 1024)) +#define BCSR_MISC_REG2_OFF 0x07 +#define BCSR_MISC_REG2_PORESET 0x01 + +#define BCSR_MISC_REG3_OFF 0x08 +#define BCSR_MISC_REG3_CNFLOCK 0x80 + #ifdef CONFIG_PCI /* PCI interrupt controller */ #define PIRQA MPC83xx_IRQ_IRQ4 diff --git a/arch/ppc/platforms/85xx/mpc8540_ads.c b/arch/ppc/platforms/85xx/mpc8540_ads.c index 4d857d6d633..583838ab02d 100644 --- a/arch/ppc/platforms/85xx/mpc8540_ads.c +++ b/arch/ppc/platforms/85xx/mpc8540_ads.c @@ -210,6 +210,9 @@ platform_init(unsigned long r3, unsigned long r4, unsigned long r5, #if defined(CONFIG_SERIAL_8250) && defined(CONFIG_SERIAL_TEXT_DEBUG) ppc_md.progress = gen550_progress; #endif /* CONFIG_SERIAL_8250 && CONFIG_SERIAL_TEXT_DEBUG */ +#if defined(CONFIG_SERIAL_8250) && defined(CONFIG_KGDB) + ppc_md.early_serial_map = mpc85xx_early_serial_map; +#endif /* CONFIG_SERIAL_8250 && CONFIG_KGDB */ if (ppc_md.progress) ppc_md.progress("mpc8540ads_init(): exit", 0); diff --git a/arch/ppc/platforms/85xx/mpc85xx_cds_common.c b/arch/ppc/platforms/85xx/mpc85xx_cds_common.c index 6c020d67ad7..e7cfa498568 100644 --- a/arch/ppc/platforms/85xx/mpc85xx_cds_common.c +++ b/arch/ppc/platforms/85xx/mpc85xx_cds_common.c @@ -44,6 +44,7 @@ #include <asm/machdep.h> #include <asm/prom.h> #include <asm/open_pic.h> +#include <asm/i8259.h> #include <asm/bootinfo.h> #include <asm/pci-bridge.h> #include <asm/mpc85xx.h> @@ -181,6 +182,7 @@ void __init mpc85xx_cds_init_IRQ(void) { bd_t *binfo = (bd_t *) __res; + int i; /* Determine the Physical Address of the OpenPIC regs */ phys_addr_t OpenPIC_PAddr = binfo->bi_immr_base + MPC85xx_OPENPIC_OFFSET; @@ -198,6 +200,15 @@ mpc85xx_cds_init_IRQ(void) */ openpic_init(MPC85xx_OPENPIC_IRQ_OFFSET); +#ifdef CONFIG_PCI + openpic_hookup_cascade(PIRQ0A, "82c59 cascade", i8259_irq); + + for (i = 0; i < NUM_8259_INTERRUPTS; i++) + irq_desc[i].handler = &i8259_pic; + + i8259_init(0); +#endif + #ifdef CONFIG_CPM2 /* Setup CPM2 PIC */ cpm2_init_IRQ(); @@ -231,7 +242,7 @@ mpc85xx_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin) * interrupt on slot */ { { 0, 1, 2, 3 }, /* 16 - PMC */ - { 3, 0, 0, 0 }, /* 17 P2P (Tsi320) */ + { 0, 1, 2, 3 }, /* 17 P2P (Tsi320) */ { 0, 1, 2, 3 }, /* 18 - Slot 1 */ { 1, 2, 3, 0 }, /* 19 - Slot 2 */ { 2, 3, 0, 1 }, /* 20 - Slot 3 */ @@ -280,13 +291,135 @@ mpc85xx_exclude_device(u_char bus, u_char devfn) return PCIBIOS_DEVICE_NOT_FOUND; #endif /* We explicitly do not go past the Tundra 320 Bridge */ - if (bus == 1) + if ((bus == 1) && (PCI_SLOT(devfn) == ARCADIA_2ND_BRIDGE_IDSEL)) return PCIBIOS_DEVICE_NOT_FOUND; if ((bus == 0) && (PCI_SLOT(devfn) == ARCADIA_2ND_BRIDGE_IDSEL)) return PCIBIOS_DEVICE_NOT_FOUND; else return PCIBIOS_SUCCESSFUL; } + +void __init +mpc85xx_cds_enable_via(struct pci_controller *hose) +{ + u32 pci_class; + u16 vid, did; + + early_read_config_dword(hose, 0, 0x88, PCI_CLASS_REVISION, &pci_class); + if ((pci_class >> 16) != PCI_CLASS_BRIDGE_PCI) + return; + + /* Configure P2P so that we can reach bus 1 */ + early_write_config_byte(hose, 0, 0x88, PCI_PRIMARY_BUS, 0); + early_write_config_byte(hose, 0, 0x88, PCI_SECONDARY_BUS, 1); + early_write_config_byte(hose, 0, 0x88, PCI_SUBORDINATE_BUS, 0xff); + + early_read_config_word(hose, 1, 0x10, PCI_VENDOR_ID, &vid); + early_read_config_word(hose, 1, 0x10, PCI_DEVICE_ID, &did); + + if ((vid != PCI_VENDOR_ID_VIA) || + (did != PCI_DEVICE_ID_VIA_82C686)) + return; + + /* Enable USB and IDE functions */ + early_write_config_byte(hose, 1, 0x10, 0x48, 0x08); +} + +void __init +mpc85xx_cds_fixup_via(struct pci_controller *hose) +{ + u32 pci_class; + u16 vid, did; + + early_read_config_dword(hose, 0, 0x88, PCI_CLASS_REVISION, &pci_class); + if ((pci_class >> 16) != PCI_CLASS_BRIDGE_PCI) + return; + + /* + * Force the backplane P2P bridge to have a window + * open from 0x00000000-0x00001fff in PCI I/O space. + * This allows legacy I/O (i8259, etc) on the VIA + * southbridge to be accessed. + */ + early_write_config_byte(hose, 0, 0x88, PCI_IO_BASE, 0x00); + early_write_config_word(hose, 0, 0x88, PCI_IO_BASE_UPPER16, 0x0000); + early_write_config_byte(hose, 0, 0x88, PCI_IO_LIMIT, 0x10); + early_write_config_word(hose, 0, 0x88, PCI_IO_LIMIT_UPPER16, 0x0000); + + early_read_config_word(hose, 1, 0x10, PCI_VENDOR_ID, &vid); + early_read_config_word(hose, 1, 0x10, PCI_DEVICE_ID, &did); + if ((vid != PCI_VENDOR_ID_VIA) || + (did != PCI_DEVICE_ID_VIA_82C686)) + return; + + /* + * Since the P2P window was forced to cover the fixed + * legacy I/O addresses, it is necessary to manually + * place the base addresses for the IDE and USB functions + * within this window. + */ + /* Function 1, IDE */ + early_write_config_dword(hose, 1, 0x11, PCI_BASE_ADDRESS_0, 0x1ff8); + early_write_config_dword(hose, 1, 0x11, PCI_BASE_ADDRESS_1, 0x1ff4); + early_write_config_dword(hose, 1, 0x11, PCI_BASE_ADDRESS_2, 0x1fe8); + early_write_config_dword(hose, 1, 0x11, PCI_BASE_ADDRESS_3, 0x1fe4); + early_write_config_dword(hose, 1, 0x11, PCI_BASE_ADDRESS_4, 0x1fd0); + + /* Function 2, USB ports 0-1 */ + early_write_config_dword(hose, 1, 0x12, PCI_BASE_ADDRESS_4, 0x1fa0); + + /* Function 3, USB ports 2-3 */ + early_write_config_dword(hose, 1, 0x13, PCI_BASE_ADDRESS_4, 0x1f80); + + /* Function 5, Power Management */ + early_write_config_dword(hose, 1, 0x15, PCI_BASE_ADDRESS_0, 0x1e00); + early_write_config_dword(hose, 1, 0x15, PCI_BASE_ADDRESS_1, 0x1dfc); + early_write_config_dword(hose, 1, 0x15, PCI_BASE_ADDRESS_2, 0x1df8); + + /* Function 6, AC97 Interface */ + early_write_config_dword(hose, 1, 0x16, PCI_BASE_ADDRESS_0, 0x1c00); +} + +void __init +mpc85xx_cds_pcibios_fixup(void) +{ + struct pci_dev *dev = NULL; + u_char c; + + if ((dev = pci_find_device(PCI_VENDOR_ID_VIA, + PCI_DEVICE_ID_VIA_82C586_1, NULL))) { + /* + * U-Boot does not set the enable bits + * for the IDE device. Force them on here. + */ + pci_read_config_byte(dev, 0x40, &c); + c |= 0x03; /* IDE: Chip Enable Bits */ + pci_write_config_byte(dev, 0x40, c); + + /* + * Since only primary interface works, force the + * IDE function to standard primary IDE interrupt + * w/ 8259 offset + */ + dev->irq = 14; + pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq); + } + + /* + * Force legacy USB interrupt routing + */ + if ((dev = pci_find_device(PCI_VENDOR_ID_VIA, + PCI_DEVICE_ID_VIA_82C586_2, NULL))) { + dev->irq = 10; + pci_write_config_byte(dev, PCI_INTERRUPT_LINE, 10); + } + + if ((dev = pci_find_device(PCI_VENDOR_ID_VIA, + PCI_DEVICE_ID_VIA_82C586_2, dev))) { + dev->irq = 11; + pci_write_config_byte(dev, PCI_INTERRUPT_LINE, 11); + } +} #endif /* CONFIG_PCI */ TODC_ALLOC(); @@ -328,6 +461,9 @@ mpc85xx_cds_setup_arch(void) loops_per_jiffy = freq / HZ; #ifdef CONFIG_PCI + /* VIA IDE configuration */ + ppc_md.pcibios_fixup = mpc85xx_cds_pcibios_fixup; + /* setup PCI host bridges */ mpc85xx_setup_hose(); #endif @@ -459,6 +595,9 @@ platform_init(unsigned long r3, unsigned long r4, unsigned long r5, #if defined(CONFIG_SERIAL_8250) && defined(CONFIG_SERIAL_TEXT_DEBUG) ppc_md.progress = gen550_progress; #endif /* CONFIG_SERIAL_8250 && CONFIG_SERIAL_TEXT_DEBUG */ +#if defined(CONFIG_SERIAL_8250) && defined(CONFIG_KGDB) + ppc_md.early_serial_map = mpc85xx_early_serial_map; +#endif /* CONFIG_SERIAL_8250 && CONFIG_KGDB */ if (ppc_md.progress) ppc_md.progress("mpc85xx_cds_init(): exit", 0); diff --git a/arch/ppc/platforms/85xx/mpc85xx_cds_common.h b/arch/ppc/platforms/85xx/mpc85xx_cds_common.h index 7627d77504b..12b292c6ae3 100644 --- a/arch/ppc/platforms/85xx/mpc85xx_cds_common.h +++ b/arch/ppc/platforms/85xx/mpc85xx_cds_common.h @@ -77,4 +77,7 @@ #define MPC85XX_PCI2_IO_SIZE 0x01000000 +#define NR_8259_INTS 16 +#define CPM_IRQ_OFFSET NR_8259_INTS + #endif /* __MACH_MPC85XX_CDS_H__ */ diff --git a/arch/ppc/platforms/85xx/sbc8560.c b/arch/ppc/platforms/85xx/sbc8560.c index 9ab05e590c3..7b9e1543e17 100644 --- a/arch/ppc/platforms/85xx/sbc8560.c +++ b/arch/ppc/platforms/85xx/sbc8560.c @@ -221,6 +221,9 @@ platform_init(unsigned long r3, unsigned long r4, unsigned long r5, #if defined(CONFIG_SERIAL_8250) && defined(CONFIG_SERIAL_TEXT_DEBUG) ppc_md.progress = gen550_progress; #endif /* CONFIG_SERIAL_8250 && CONFIG_SERIAL_TEXT_DEBUG */ +#if defined(CONFIG_SERIAL_8250) && defined(CONFIG_KGDB) + ppc_md.early_serial_map = sbc8560_early_serial_map; +#endif /* CONFIG_SERIAL_8250 && CONFIG_KGDB */ if (ppc_md.progress) ppc_md.progress("sbc8560_init(): exit", 0); diff --git a/arch/ppc/platforms/pmac_cpufreq.c b/arch/ppc/platforms/pmac_cpufreq.c index f7fb2786cd5..937f46df711 100644 --- a/arch/ppc/platforms/pmac_cpufreq.c +++ b/arch/ppc/platforms/pmac_cpufreq.c @@ -85,14 +85,11 @@ static int no_schedule; static int has_cpu_l2lve; -#define PMAC_CPU_LOW_SPEED 1 -#define PMAC_CPU_HIGH_SPEED 0 - /* There are only two frequency states for each processor. Values * are in kHz for the time being. */ -#define CPUFREQ_HIGH PMAC_CPU_HIGH_SPEED -#define CPUFREQ_LOW PMAC_CPU_LOW_SPEED +#define CPUFREQ_HIGH 0 +#define CPUFREQ_LOW 1 static struct cpufreq_frequency_table pmac_cpu_freqs[] = { {CPUFREQ_HIGH, 0}, @@ -100,6 +97,11 @@ static struct cpufreq_frequency_table pmac_cpu_freqs[] = { {0, CPUFREQ_TABLE_END}, }; +static struct freq_attr* pmac_cpu_freqs_attr[] = { + &cpufreq_freq_attr_scaling_available_freqs, + NULL, +}; + static inline void local_delay(unsigned long ms) { if (no_schedule) @@ -269,6 +271,8 @@ static int __pmac pmu_set_cpu_speed(int low_speed) #ifdef DEBUG_FREQ printk(KERN_DEBUG "HID1, before: %x\n", mfspr(SPRN_HID1)); #endif + pmu_suspend(); + /* Disable all interrupt sources on openpic */ pic_prio = openpic_get_priority(); openpic_set_priority(0xf); @@ -343,6 +347,8 @@ static int __pmac pmu_set_cpu_speed(int low_speed) debug_calc_bogomips(); #endif + pmu_resume(); + preempt_enable(); return 0; @@ -355,7 +361,7 @@ static int __pmac do_set_cpu_speed(int speed_mode, int notify) static unsigned long prev_l3cr; freqs.old = cur_freq; - freqs.new = (speed_mode == PMAC_CPU_HIGH_SPEED) ? hi_freq : low_freq; + freqs.new = (speed_mode == CPUFREQ_HIGH) ? hi_freq : low_freq; freqs.cpu = smp_processor_id(); if (freqs.old == freqs.new) @@ -363,7 +369,7 @@ static int __pmac do_set_cpu_speed(int speed_mode, int notify) if (notify) cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); - if (speed_mode == PMAC_CPU_LOW_SPEED && + if (speed_mode == CPUFREQ_LOW && cpu_has_feature(CPU_FTR_L3CR)) { l3cr = _get_L3CR(); if (l3cr & L3CR_L3E) { @@ -371,8 +377,8 @@ static int __pmac do_set_cpu_speed(int speed_mode, int notify) _set_L3CR(0); } } - set_speed_proc(speed_mode == PMAC_CPU_LOW_SPEED); - if (speed_mode == PMAC_CPU_HIGH_SPEED && + set_speed_proc(speed_mode == CPUFREQ_LOW); + if (speed_mode == CPUFREQ_HIGH && cpu_has_feature(CPU_FTR_L3CR)) { l3cr = _get_L3CR(); if ((prev_l3cr & L3CR_L3E) && l3cr != prev_l3cr) @@ -380,7 +386,7 @@ static int __pmac do_set_cpu_speed(int speed_mode, int notify) } if (notify) cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); - cur_freq = (speed_mode == PMAC_CPU_HIGH_SPEED) ? hi_freq : low_freq; + cur_freq = (speed_mode == CPUFREQ_HIGH) ? hi_freq : low_freq; return 0; } @@ -423,7 +429,8 @@ static int __pmac pmac_cpufreq_cpu_init(struct cpufreq_policy *policy) policy->cpuinfo.transition_latency = CPUFREQ_ETERNAL; policy->cur = cur_freq; - return cpufreq_frequency_table_cpuinfo(policy, &pmac_cpu_freqs[0]); + cpufreq_frequency_table_get_attr(pmac_cpu_freqs, policy->cpu); + return cpufreq_frequency_table_cpuinfo(policy, pmac_cpu_freqs); } static u32 __pmac read_gpio(struct device_node *np) @@ -457,7 +464,7 @@ static int __pmac pmac_cpufreq_suspend(struct cpufreq_policy *policy, u32 state) no_schedule = 1; sleep_freq = cur_freq; if (cur_freq == low_freq) - do_set_cpu_speed(PMAC_CPU_HIGH_SPEED, 0); + do_set_cpu_speed(CPUFREQ_HIGH, 0); return 0; } @@ -473,8 +480,8 @@ static int __pmac pmac_cpufreq_resume(struct cpufreq_policy *policy) * is that we force a switch to whatever it was, which is * probably high speed due to our suspend() routine */ - do_set_cpu_speed(sleep_freq == low_freq ? PMAC_CPU_LOW_SPEED - : PMAC_CPU_HIGH_SPEED, 0); + do_set_cpu_speed(sleep_freq == low_freq ? + CPUFREQ_LOW : CPUFREQ_HIGH, 0); no_schedule = 0; return 0; @@ -488,6 +495,7 @@ static struct cpufreq_driver pmac_cpufreq_driver = { .suspend = pmac_cpufreq_suspend, .resume = pmac_cpufreq_resume, .flags = CPUFREQ_PM_NO_WARN, + .attr = pmac_cpu_freqs_attr, .name = "powermac", .owner = THIS_MODULE, }; diff --git a/arch/ppc/platforms/pq2ads.h b/arch/ppc/platforms/pq2ads.h index cf5e5dd06d6..067d9a5aebc 100644 --- a/arch/ppc/platforms/pq2ads.h +++ b/arch/ppc/platforms/pq2ads.h @@ -49,10 +49,10 @@ /* PCI interrupt controller */ #define PCI_INT_STAT_REG 0xF8200000 #define PCI_INT_MASK_REG 0xF8200004 -#define PIRQA (NR_SIU_INTS + 0) -#define PIRQB (NR_SIU_INTS + 1) -#define PIRQC (NR_SIU_INTS + 2) -#define PIRQD (NR_SIU_INTS + 3) +#define PIRQA (NR_CPM_INTS + 0) +#define PIRQB (NR_CPM_INTS + 1) +#define PIRQC (NR_CPM_INTS + 2) +#define PIRQD (NR_CPM_INTS + 3) /* * PCI memory map definitions for MPC8266ADS-PCI. @@ -68,28 +68,23 @@ * 0x00000000-0x1FFFFFFF 0x00000000-0x1FFFFFFF MPC8266 local memory */ -/* window for a PCI master to access MPC8266 memory */ -#define PCI_SLV_MEM_LOCAL 0x00000000 /* Local base */ -#define PCI_SLV_MEM_BUS 0x00000000 /* PCI base */ +/* All the other PCI memory map definitions reside at syslib/m82xx_pci.h + Here we should redefine what is unique for this board */ +#define M82xx_PCI_SLAVE_MEM_LOCAL 0x00000000 /* Local base */ +#define M82xx_PCI_SLAVE_MEM_BUS 0x00000000 /* PCI base */ +#define M82xx_PCI_SLAVE_MEM_SIZE 0x10000000 /* 256 Mb */ -/* window for the processor to access PCI memory with prefetching */ -#define PCI_MSTR_MEM_LOCAL 0x80000000 /* Local base */ -#define PCI_MSTR_MEM_BUS 0x80000000 /* PCI base */ -#define PCI_MSTR_MEM_SIZE 0x20000000 /* 512MB */ +#define M82xx_PCI_SLAVE_SEC_WND_SIZE ~(0x40000000 - 1U) /* 2 x 512Mb */ +#define M82xx_PCI_SLAVE_SEC_WND_BASE 0x80000000 /* PCI Memory base */ -/* window for the processor to access PCI memory without prefetching */ -#define PCI_MSTR_MEMIO_LOCAL 0xA0000000 /* Local base */ -#define PCI_MSTR_MEMIO_BUS 0xA0000000 /* PCI base */ -#define PCI_MSTR_MEMIO_SIZE 0x20000000 /* 512MB */ +#if defined(CONFIG_ADS8272) +#define PCI_INT_TO_SIU SIU_INT_IRQ2 +#elif defined(CONFIG_PQ2FADS) +#define PCI_INT_TO_SIU SIU_INT_IRQ6 +#else +#warning PCI Bridge will be without interrupts support +#endif -/* window for the processor to access PCI I/O */ -#define PCI_MSTR_IO_LOCAL 0xF4000000 /* Local base */ -#define PCI_MSTR_IO_BUS 0x00000000 /* PCI base */ -#define PCI_MSTR_IO_SIZE 0x04000000 /* 64MB */ - -#define _IO_BASE PCI_MSTR_IO_LOCAL -#define _ISA_MEM_BASE PCI_MSTR_MEMIO_LOCAL -#define PCI_DRAM_OFFSET PCI_SLV_MEM_BUS #endif /* CONFIG_PCI */ #endif /* __MACH_ADS8260_DEFS */ diff --git a/arch/ppc/syslib/Makefile b/arch/ppc/syslib/Makefile index dd418ea3426..96acf85800d 100644 --- a/arch/ppc/syslib/Makefile +++ b/arch/ppc/syslib/Makefile @@ -81,7 +81,7 @@ obj-$(CONFIG_SBC82xx) += todc_time.o obj-$(CONFIG_SPRUCE) += cpc700_pic.o indirect_pci.o pci_auto.o \ todc_time.o obj-$(CONFIG_8260) += m8260_setup.o -obj-$(CONFIG_PCI_8260) += m8260_pci.o indirect_pci.o +obj-$(CONFIG_PCI_8260) += m82xx_pci.o indirect_pci.o pci_auto.o obj-$(CONFIG_8260_PCI9) += m8260_pci_erratum9.o obj-$(CONFIG_CPM2) += cpm2_common.o cpm2_pic.o ifeq ($(CONFIG_PPC_GEN550),y) @@ -97,7 +97,7 @@ obj-$(CONFIG_MPC10X_OPENPIC) += open_pic.o obj-$(CONFIG_40x) += dcr.o obj-$(CONFIG_BOOKE) += dcr.o obj-$(CONFIG_85xx) += open_pic.o ppc85xx_common.o ppc85xx_setup.o \ - ppc_sys.o mpc85xx_sys.o \ + ppc_sys.o i8259.o mpc85xx_sys.o \ mpc85xx_devices.o ifeq ($(CONFIG_85xx),y) obj-$(CONFIG_PCI) += indirect_pci.o pci_auto.o diff --git a/arch/ppc/syslib/m8260_pci.c b/arch/ppc/syslib/m8260_pci.c deleted file mode 100644 index 057cc3f8ff3..00000000000 --- a/arch/ppc/syslib/m8260_pci.c +++ /dev/null @@ -1,193 +0,0 @@ -/* - * (C) Copyright 2003 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * (C) Copyright 2004 Red Hat, Inc. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/pci.h> -#include <linux/slab.h> -#include <linux/delay.h> - -#include <asm/byteorder.h> -#include <asm/io.h> -#include <asm/irq.h> -#include <asm/uaccess.h> -#include <asm/machdep.h> -#include <asm/pci-bridge.h> -#include <asm/immap_cpm2.h> -#include <asm/mpc8260.h> - -#include "m8260_pci.h" - - -/* PCI bus configuration registers. - */ - -static void __init m8260_setup_pci(struct pci_controller *hose) -{ - volatile cpm2_map_t *immap = cpm2_immr; - unsigned long pocmr; - u16 tempShort; - -#ifndef CONFIG_ATC /* already done in U-Boot */ - /* - * Setting required to enable IRQ1-IRQ7 (SIUMCR [DPPC]), - * and local bus for PCI (SIUMCR [LBPC]). - */ - immap->im_siu_conf.siu_82xx.sc_siumcr = 0x00640000; -#endif - - /* Make PCI lowest priority */ - /* Each 4 bits is a device bus request and the MS 4bits - is highest priority */ - /* Bus 4bit value - --- ---------- - CPM high 0b0000 - CPM middle 0b0001 - CPM low 0b0010 - PCI reguest 0b0011 - Reserved 0b0100 - Reserved 0b0101 - Internal Core 0b0110 - External Master 1 0b0111 - External Master 2 0b1000 - External Master 3 0b1001 - The rest are reserved */ - immap->im_siu_conf.siu_82xx.sc_ppc_alrh = 0x61207893; - - /* Park bus on core while modifying PCI Bus accesses */ - immap->im_siu_conf.siu_82xx.sc_ppc_acr = 0x6; - - /* - * Set up master window that allows the CPU to access PCI space. This - * window is set up using the first SIU PCIBR registers. - */ - immap->im_memctl.memc_pcimsk0 = MPC826x_PCI_MASK; - immap->im_memctl.memc_pcibr0 = MPC826x_PCI_BASE | PCIBR_ENABLE; - - /* Disable machine check on no response or target abort */ - immap->im_pci.pci_emr = cpu_to_le32(0x1fe7); - /* Release PCI RST (by default the PCI RST signal is held low) */ - immap->im_pci.pci_gcr = cpu_to_le32(PCIGCR_PCI_BUS_EN); - - /* give it some time */ - mdelay(1); - - /* - * Set up master window that allows the CPU to access PCI Memory (prefetch) - * space. This window is set up using the first set of Outbound ATU registers. - */ - immap->im_pci.pci_potar0 = cpu_to_le32(MPC826x_PCI_LOWER_MEM >> 12); - immap->im_pci.pci_pobar0 = cpu_to_le32((MPC826x_PCI_LOWER_MEM - MPC826x_PCI_MEM_OFFSET) >> 12); - pocmr = ((MPC826x_PCI_UPPER_MEM - MPC826x_PCI_LOWER_MEM) >> 12) ^ 0xfffff; - immap->im_pci.pci_pocmr0 = cpu_to_le32(pocmr | POCMR_ENABLE | POCMR_PREFETCH_EN); - - /* - * Set up master window that allows the CPU to access PCI Memory (non-prefetch) - * space. This window is set up using the second set of Outbound ATU registers. - */ - immap->im_pci.pci_potar1 = cpu_to_le32(MPC826x_PCI_LOWER_MMIO >> 12); - immap->im_pci.pci_pobar1 = cpu_to_le32((MPC826x_PCI_LOWER_MMIO - MPC826x_PCI_MMIO_OFFSET) >> 12); - pocmr = ((MPC826x_PCI_UPPER_MMIO - MPC826x_PCI_LOWER_MMIO) >> 12) ^ 0xfffff; - immap->im_pci.pci_pocmr1 = cpu_to_le32(pocmr | POCMR_ENABLE); - - /* - * Set up master window that allows the CPU to access PCI IO space. This window - * is set up using the third set of Outbound ATU registers. - */ - immap->im_pci.pci_potar2 = cpu_to_le32(MPC826x_PCI_IO_BASE >> 12); - immap->im_pci.pci_pobar2 = cpu_to_le32(MPC826x_PCI_LOWER_IO >> 12); - pocmr = ((MPC826x_PCI_UPPER_IO - MPC826x_PCI_LOWER_IO) >> 12) ^ 0xfffff; - immap->im_pci.pci_pocmr2 = cpu_to_le32(pocmr | POCMR_ENABLE | POCMR_PCI_IO); - - /* - * Set up slave window that allows PCI masters to access MPC826x local memory. - * This window is set up using the first set of Inbound ATU registers - */ - - immap->im_pci.pci_pitar0 = cpu_to_le32(MPC826x_PCI_SLAVE_MEM_LOCAL >> 12); - immap->im_pci.pci_pibar0 = cpu_to_le32(MPC826x_PCI_SLAVE_MEM_BUS >> 12); - pocmr = ((MPC826x_PCI_SLAVE_MEM_SIZE-1) >> 12) ^ 0xfffff; - immap->im_pci.pci_picmr0 = cpu_to_le32(pocmr | PICMR_ENABLE | PICMR_PREFETCH_EN); - - /* See above for description - puts PCI request as highest priority */ - immap->im_siu_conf.siu_82xx.sc_ppc_alrh = 0x03124567; - - /* Park the bus on the PCI */ - immap->im_siu_conf.siu_82xx.sc_ppc_acr = PPC_ACR_BUS_PARK_PCI; - - /* Host mode - specify the bridge as a host-PCI bridge */ - early_write_config_word(hose, 0, 0, PCI_CLASS_DEVICE, PCI_CLASS_BRIDGE_HOST); - - /* Enable the host bridge to be a master on the PCI bus, and to act as a PCI memory target */ - early_read_config_word(hose, 0, 0, PCI_COMMAND, &tempShort); - early_write_config_word(hose, 0, 0, PCI_COMMAND, - tempShort | PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY); -} - -void __init m8260_find_bridges(void) -{ - extern int pci_assign_all_busses; - struct pci_controller * hose; - - pci_assign_all_busses = 1; - - hose = pcibios_alloc_controller(); - - if (!hose) - return; - - ppc_md.pci_swizzle = common_swizzle; - - hose->first_busno = 0; - hose->bus_offset = 0; - hose->last_busno = 0xff; - - setup_m8260_indirect_pci(hose, - (unsigned long)&cpm2_immr->im_pci.pci_cfg_addr, - (unsigned long)&cpm2_immr->im_pci.pci_cfg_data); - - m8260_setup_pci(hose); - hose->pci_mem_offset = MPC826x_PCI_MEM_OFFSET; - - hose->io_base_virt = ioremap(MPC826x_PCI_IO_BASE, - MPC826x_PCI_IO_SIZE); - isa_io_base = (unsigned long) hose->io_base_virt; - - /* setup resources */ - pci_init_resource(&hose->mem_resources[0], - MPC826x_PCI_LOWER_MEM, - MPC826x_PCI_UPPER_MEM, - IORESOURCE_MEM|IORESOURCE_PREFETCH, "PCI prefetchable memory"); - - pci_init_resource(&hose->mem_resources[1], - MPC826x_PCI_LOWER_MMIO, - MPC826x_PCI_UPPER_MMIO, - IORESOURCE_MEM, "PCI memory"); - - pci_init_resource(&hose->io_resource, - MPC826x_PCI_LOWER_IO, - MPC826x_PCI_UPPER_IO, - IORESOURCE_IO, "PCI I/O"); -} diff --git a/arch/ppc/syslib/m8260_pci.h b/arch/ppc/syslib/m8260_pci.h deleted file mode 100644 index d1352120acd..00000000000 --- a/arch/ppc/syslib/m8260_pci.h +++ /dev/null @@ -1,76 +0,0 @@ - -#ifndef _PPC_KERNEL_M8260_PCI_H -#define _PPC_KERNEL_M8260_PCI_H - -#include <asm/m8260_pci.h> - -/* - * Local->PCI map (from CPU) controlled by - * MPC826x master window - * - * 0x80000000 - 0xBFFFFFFF Total CPU2PCI space PCIBR0 - * - * 0x80000000 - 0x9FFFFFFF PCI Mem with prefetch (Outbound ATU #1) - * 0xA0000000 - 0xAFFFFFFF PCI Mem w/o prefetch (Outbound ATU #2) - * 0xB0000000 - 0xB0FFFFFF 32-bit PCI IO (Outbound ATU #3) - * - * PCI->Local map (from PCI) - * MPC826x slave window controlled by - * - * 0x00000000 - 0x07FFFFFF MPC826x local memory (Inbound ATU #1) - */ - -/* - * Slave window that allows PCI masters to access MPC826x local memory. - * This window is set up using the first set of Inbound ATU registers - */ - -#ifndef MPC826x_PCI_SLAVE_MEM_LOCAL -#define MPC826x_PCI_SLAVE_MEM_LOCAL (((struct bd_info *)__res)->bi_memstart) -#define MPC826x_PCI_SLAVE_MEM_BUS (((struct bd_info *)__res)->bi_memstart) -#define MPC826x_PCI_SLAVE_MEM_SIZE (((struct bd_info *)__res)->bi_memsize) -#endif - -/* - * This is the window that allows the CPU to access PCI address space. - * It will be setup with the SIU PCIBR0 register. All three PCI master - * windows, which allow the CPU to access PCI prefetch, non prefetch, - * and IO space (see below), must all fit within this window. - */ -#ifndef MPC826x_PCI_BASE -#define MPC826x_PCI_BASE 0x80000000 -#define MPC826x_PCI_MASK 0xc0000000 -#endif - -#ifndef MPC826x_PCI_LOWER_MEM -#define MPC826x_PCI_LOWER_MEM 0x80000000 -#define MPC826x_PCI_UPPER_MEM 0x9fffffff -#define MPC826x_PCI_MEM_OFFSET 0x00000000 -#endif - -#ifndef MPC826x_PCI_LOWER_MMIO -#define MPC826x_PCI_LOWER_MMIO 0xa0000000 -#define MPC826x_PCI_UPPER_MMIO 0xafffffff -#define MPC826x_PCI_MMIO_OFFSET 0x00000000 -#endif - -#ifndef MPC826x_PCI_LOWER_IO -#define MPC826x_PCI_LOWER_IO 0x00000000 -#define MPC826x_PCI_UPPER_IO 0x00ffffff -#define MPC826x_PCI_IO_BASE 0xb0000000 -#define MPC826x_PCI_IO_SIZE 0x01000000 -#endif - -#ifndef _IO_BASE -#define _IO_BASE isa_io_base -#endif - -#ifdef CONFIG_8260_PCI9 -struct pci_controller; -extern void setup_m8260_indirect_pci(struct pci_controller* hose, - u32 cfg_addr, u32 cfg_data); -#else -#define setup_m8260_indirect_pci setup_indirect_pci -#endif - -#endif /* _PPC_KERNEL_M8260_PCI_H */ diff --git a/arch/ppc/syslib/m8260_pci_erratum9.c b/arch/ppc/syslib/m8260_pci_erratum9.c index 9c0582d639e..1dc7e4e1d49 100644 --- a/arch/ppc/syslib/m8260_pci_erratum9.c +++ b/arch/ppc/syslib/m8260_pci_erratum9.c @@ -31,7 +31,7 @@ #include <asm/immap_cpm2.h> #include <asm/cpm2.h> -#include "m8260_pci.h" +#include "m82xx_pci.h" #ifdef CONFIG_8260_PCI9 /*#include <asm/mpc8260_pci9.h>*/ /* included in asm/io.h */ @@ -248,11 +248,11 @@ EXPORT_SYMBOL(idma_pci9_read_le); static inline int is_pci_mem(unsigned long addr) { - if (addr >= MPC826x_PCI_LOWER_MMIO && - addr <= MPC826x_PCI_UPPER_MMIO) + if (addr >= M82xx_PCI_LOWER_MMIO && + addr <= M82xx_PCI_UPPER_MMIO) return 1; - if (addr >= MPC826x_PCI_LOWER_MEM && - addr <= MPC826x_PCI_UPPER_MEM) + if (addr >= M82xx_PCI_LOWER_MEM && + addr <= M82xx_PCI_UPPER_MEM) return 1; return 0; } diff --git a/arch/ppc/syslib/m8260_setup.c b/arch/ppc/syslib/m8260_setup.c index 23ea3f694de..fda75d79050 100644 --- a/arch/ppc/syslib/m8260_setup.c +++ b/arch/ppc/syslib/m8260_setup.c @@ -34,7 +34,8 @@ unsigned char __res[sizeof(bd_t)]; extern void cpm2_reset(void); -extern void m8260_find_bridges(void); +extern void pq2_find_bridges(void); +extern void pq2pci_init_irq(void); extern void idma_pci9_init(void); /* Place-holder for board-specific init */ @@ -56,7 +57,7 @@ m8260_setup_arch(void) idma_pci9_init(); #endif #ifdef CONFIG_PCI_8260 - m8260_find_bridges(); + pq2_find_bridges(); #endif #ifdef CONFIG_BLK_DEV_INITRD if (initrd_start) @@ -173,6 +174,12 @@ m8260_init_IRQ(void) * in case the boot rom changed something on us. */ cpm2_immr->im_intctl.ic_siprr = 0x05309770; + +#if defined(CONFIG_PCI) && (defined(CONFIG_ADS8272) || defined(CONFIG_PQ2FADS)) + /* Initialize stuff for the 82xx CPLD IC and install demux */ + pq2pci_init_irq(); +#endif + } /* diff --git a/arch/ppc/syslib/m82xx_pci.c b/arch/ppc/syslib/m82xx_pci.c new file mode 100644 index 00000000000..5e7a7edcea7 --- /dev/null +++ b/arch/ppc/syslib/m82xx_pci.c @@ -0,0 +1,383 @@ +/* + * + * (C) Copyright 2003 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * (C) Copyright 2004 Red Hat, Inc. + * + * 2005 (c) MontaVista Software, Inc. + * Vitaly Bordug <vbordug@ru.mvista.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/pci.h> +#include <linux/slab.h> +#include <linux/delay.h> +#include <linux/irq.h> +#include <linux/interrupt.h> + +#include <asm/byteorder.h> +#include <asm/io.h> +#include <asm/irq.h> +#include <asm/uaccess.h> +#include <asm/machdep.h> +#include <asm/pci-bridge.h> +#include <asm/immap_cpm2.h> +#include <asm/mpc8260.h> +#include <asm/cpm2.h> + +#include "m82xx_pci.h" + +/* + * Interrupt routing + */ + +static inline int +pq2pci_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin) +{ + static char pci_irq_table[][4] = + /* + * PCI IDSEL/INTPIN->INTLINE + * A B C D + */ + { + { PIRQA, PIRQB, PIRQC, PIRQD }, /* IDSEL 22 - PCI slot 0 */ + { PIRQD, PIRQA, PIRQB, PIRQC }, /* IDSEL 23 - PCI slot 1 */ + { PIRQC, PIRQD, PIRQA, PIRQB }, /* IDSEL 24 - PCI slot 2 */ + }; + + const long min_idsel = 22, max_idsel = 24, irqs_per_slot = 4; + return PCI_IRQ_TABLE_LOOKUP; +} + +static void +pq2pci_mask_irq(unsigned int irq) +{ + int bit = irq - NR_CPM_INTS; + + *(volatile unsigned long *) PCI_INT_MASK_REG |= (1 << (31 - bit)); + return; +} + +static void +pq2pci_unmask_irq(unsigned int irq) +{ + int bit = irq - NR_CPM_INTS; + + *(volatile unsigned long *) PCI_INT_MASK_REG &= ~(1 << (31 - bit)); + return; +} + +static void +pq2pci_mask_and_ack(unsigned int irq) +{ + int bit = irq - NR_CPM_INTS; + + *(volatile unsigned long *) PCI_INT_MASK_REG |= (1 << (31 - bit)); + return; +} + +static void +pq2pci_end_irq(unsigned int irq) +{ + int bit = irq - NR_CPM_INTS; + + *(volatile unsigned long *) PCI_INT_MASK_REG &= ~(1 << (31 - bit)); + return; +} + +struct hw_interrupt_type pq2pci_ic = { + "PQ2 PCI", + NULL, + NULL, + pq2pci_unmask_irq, + pq2pci_mask_irq, + pq2pci_mask_and_ack, + pq2pci_end_irq, + 0 +}; + +static irqreturn_t +pq2pci_irq_demux(int irq, void *dev_id, struct pt_regs *regs) +{ + unsigned long stat, mask, pend; + int bit; + + for(;;) { + stat = *(volatile unsigned long *) PCI_INT_STAT_REG; + mask = *(volatile unsigned long *) PCI_INT_MASK_REG; + pend = stat & ~mask & 0xf0000000; + if (!pend) + break; + for (bit = 0; pend != 0; ++bit, pend <<= 1) { + if (pend & 0x80000000) + __do_IRQ(NR_CPM_INTS + bit, regs); + } + } + + return IRQ_HANDLED; +} + +static struct irqaction pq2pci_irqaction = { + .handler = pq2pci_irq_demux, + .flags = SA_INTERRUPT, + .mask = CPU_MASK_NONE, + .name = "PQ2 PCI cascade", +}; + + +void +pq2pci_init_irq(void) +{ + int irq; + volatile cpm2_map_t *immap = cpm2_immr; +#if defined CONFIG_ADS8272 + /* configure chip select for PCI interrupt controller */ + immap->im_memctl.memc_br3 = PCI_INT_STAT_REG | 0x00001801; + immap->im_memctl.memc_or3 = 0xffff8010; +#elif defined CONFIG_PQ2FADS + immap->im_memctl.memc_br8 = PCI_INT_STAT_REG | 0x00001801; + immap->im_memctl.memc_or8 = 0xffff8010; +#endif + for (irq = NR_CPM_INTS; irq < NR_CPM_INTS + 4; irq++) + irq_desc[irq].handler = &pq2pci_ic; + + /* make PCI IRQ level sensitive */ + immap->im_intctl.ic_siexr &= + ~(1 << (14 - (PCI_INT_TO_SIU - SIU_INT_IRQ1))); + + /* mask all PCI interrupts */ + *(volatile unsigned long *) PCI_INT_MASK_REG |= 0xfff00000; + + /* install the demultiplexer for the PCI cascade interrupt */ + setup_irq(PCI_INT_TO_SIU, &pq2pci_irqaction); + return; +} + +static int +pq2pci_exclude_device(u_char bus, u_char devfn) +{ + return PCIBIOS_SUCCESSFUL; +} + +/* PCI bus configuration registers. + */ +static void +pq2ads_setup_pci(struct pci_controller *hose) +{ + __u32 val; + volatile cpm2_map_t *immap = cpm2_immr; + bd_t* binfo = (bd_t*) __res; + u32 sccr = immap->im_clkrst.car_sccr; + uint pci_div,freq,time; + /* PCI int lowest prio */ + /* Each 4 bits is a device bus request and the MS 4bits + is highest priority */ + /* Bus 4bit value + --- ---------- + CPM high 0b0000 + CPM middle 0b0001 + CPM low 0b0010 + PCI reguest 0b0011 + Reserved 0b0100 + Reserved 0b0101 + Internal Core 0b0110 + External Master 1 0b0111 + External Master 2 0b1000 + External Master 3 0b1001 + The rest are reserved + */ + immap->im_siu_conf.siu_82xx.sc_ppc_alrh = 0x61207893; + /* park bus on core */ + immap->im_siu_conf.siu_82xx.sc_ppc_acr = PPC_ACR_BUS_PARK_CORE; + /* + * Set up master windows that allow the CPU to access PCI space. These + * windows are set up using the two SIU PCIBR registers. + */ + + immap->im_memctl.memc_pcimsk0 = M82xx_PCI_PRIM_WND_SIZE; + immap->im_memctl.memc_pcibr0 = M82xx_PCI_PRIM_WND_BASE | PCIBR_ENABLE; + +#ifdef M82xx_PCI_SEC_WND_SIZE + immap->im_memctl.memc_pcimsk1 = M82xx_PCI_SEC_WND_SIZE; + immap->im_memctl.memc_pcibr1 = M82xx_PCI_SEC_WND_BASE | PCIBR_ENABLE; +#endif + +#if defined CONFIG_ADS8272 + immap->im_siu_conf.siu_82xx.sc_siumcr = + (immap->im_siu_conf.siu_82xx.sc_siumcr & + ~(SIUMCR_BBD | SIUMCR_ESE | SIUMCR_PBSE | + SIUMCR_CDIS | SIUMCR_DPPC11 | SIUMCR_L2CPC11 | + SIUMCR_LBPC11 | SIUMCR_APPC11 | + SIUMCR_CS10PC11 | SIUMCR_BCTLC11 | SIUMCR_MMR11)) | + SIUMCR_DPPC11 | SIUMCR_L2CPC01 | SIUMCR_LBPC00 | + SIUMCR_APPC10 | SIUMCR_CS10PC00 | + SIUMCR_BCTLC00 | SIUMCR_MMR11 ; + +#elif defined CONFIG_PQ2FADS + /* + * Setting required to enable IRQ1-IRQ7 (SIUMCR [DPPC]), + * and local bus for PCI (SIUMCR [LBPC]). + */ + immap->im_siu_conf.siu_82xx.sc_siumcr = (immap->im_siu_conf.sc_siumcr & + ~(SIUMCR_L2PC11 | SIUMCR_LBPC11 | SIUMCR_CS10PC11 | SIUMCR_APPC11) | + SIUMCR_BBD | SIUMCR_LBPC01 | SIUMCR_DPPC11 | SIUMCR_APPC10; +#endif + /* Enable PCI */ + immap->im_pci.pci_gcr = cpu_to_le32(PCIGCR_PCI_BUS_EN); + + pci_div = ( (sccr & SCCR_PCI_MODCK) ? 2 : 1) * + ( ( (sccr & SCCR_PCIDF_MSK) >> SCCR_PCIDF_SHIFT) + 1); + freq = (uint)((2*binfo->bi_cpmfreq)/(pci_div)); + time = (int)666666/freq; + /* due to PCI Local Bus spec, some devices needs to wait such a long + time after RST deassertion. More specifically, 0.508s for 66MHz & twice more for 33 */ + printk("%s: The PCI bus is %d Mhz.\nWaiting %s after deasserting RST...\n",__FILE__,freq, + (time==1) ? "0.5 seconds":"1 second" ); + + { + int i; + for(i=0;i<(500*time);i++) + udelay(1000); + } + + /* setup ATU registers */ + immap->im_pci.pci_pocmr0 = cpu_to_le32(POCMR_ENABLE | POCMR_PCI_IO | + ((~(M82xx_PCI_IO_SIZE - 1U)) >> POTA_ADDR_SHIFT)); + immap->im_pci.pci_potar0 = cpu_to_le32(M82xx_PCI_LOWER_IO >> POTA_ADDR_SHIFT); + immap->im_pci.pci_pobar0 = cpu_to_le32(M82xx_PCI_IO_BASE >> POTA_ADDR_SHIFT); + + /* Set-up non-prefetchable window */ + immap->im_pci.pci_pocmr1 = cpu_to_le32(POCMR_ENABLE | ((~(M82xx_PCI_MMIO_SIZE-1U)) >> POTA_ADDR_SHIFT)); + immap->im_pci.pci_potar1 = cpu_to_le32(M82xx_PCI_LOWER_MMIO >> POTA_ADDR_SHIFT); + immap->im_pci.pci_pobar1 = cpu_to_le32((M82xx_PCI_LOWER_MMIO - M82xx_PCI_MMIO_OFFSET) >> POTA_ADDR_SHIFT); + + /* Set-up prefetchable window */ + immap->im_pci.pci_pocmr2 = cpu_to_le32(POCMR_ENABLE |POCMR_PREFETCH_EN | + (~(M82xx_PCI_MEM_SIZE-1U) >> POTA_ADDR_SHIFT)); + immap->im_pci.pci_potar2 = cpu_to_le32(M82xx_PCI_LOWER_MEM >> POTA_ADDR_SHIFT); + immap->im_pci.pci_pobar2 = cpu_to_le32((M82xx_PCI_LOWER_MEM - M82xx_PCI_MEM_OFFSET) >> POTA_ADDR_SHIFT); + + /* Inbound transactions from PCI memory space */ + immap->im_pci.pci_picmr0 = cpu_to_le32(PICMR_ENABLE | PICMR_PREFETCH_EN | + ((~(M82xx_PCI_SLAVE_MEM_SIZE-1U)) >> PITA_ADDR_SHIFT)); + immap->im_pci.pci_pibar0 = cpu_to_le32(M82xx_PCI_SLAVE_MEM_BUS >> PITA_ADDR_SHIFT); + immap->im_pci.pci_pitar0 = cpu_to_le32(M82xx_PCI_SLAVE_MEM_LOCAL>> PITA_ADDR_SHIFT); + +#if defined CONFIG_ADS8272 + /* PCI int highest prio */ + immap->im_siu_conf.siu_82xx.sc_ppc_alrh = 0x01236745; +#elif defined CONFIG_PQ2FADS + immap->im_siu_conf.siu_82xx.sc_ppc_alrh = 0x03124567; +#endif + /* park bus on PCI */ + immap->im_siu_conf.siu_82xx.sc_ppc_acr = PPC_ACR_BUS_PARK_PCI; + + /* Enable bus mastering and inbound memory transactions */ + early_read_config_dword(hose, hose->first_busno, 0, PCI_COMMAND, &val); + val &= 0xffff0000; + val |= PCI_COMMAND_MEMORY|PCI_COMMAND_MASTER; + early_write_config_dword(hose, hose->first_busno, 0, PCI_COMMAND, val); + +} + +void __init pq2_find_bridges(void) +{ + extern int pci_assign_all_busses; + struct pci_controller * hose; + int host_bridge; + + pci_assign_all_busses = 1; + + hose = pcibios_alloc_controller(); + + if (!hose) + return; + + ppc_md.pci_swizzle = common_swizzle; + + hose->first_busno = 0; + hose->bus_offset = 0; + hose->last_busno = 0xff; + +#ifdef CONFIG_ADS8272 + hose->set_cfg_type = 1; +#endif + + setup_m8260_indirect_pci(hose, + (unsigned long)&cpm2_immr->im_pci.pci_cfg_addr, + (unsigned long)&cpm2_immr->im_pci.pci_cfg_data); + + /* Make sure it is a supported bridge */ + early_read_config_dword(hose, + 0, + PCI_DEVFN(0,0), + PCI_VENDOR_ID, + &host_bridge); + switch (host_bridge) { + case PCI_DEVICE_ID_MPC8265: + break; + case PCI_DEVICE_ID_MPC8272: + break; + default: + printk("Attempting to use unrecognized host bridge ID" + " 0x%08x.\n", host_bridge); + break; + } + + pq2ads_setup_pci(hose); + + hose->io_space.start = M82xx_PCI_LOWER_IO; + hose->io_space.end = M82xx_PCI_UPPER_IO; + hose->mem_space.start = M82xx_PCI_LOWER_MEM; + hose->mem_space.end = M82xx_PCI_UPPER_MMIO; + hose->pci_mem_offset = M82xx_PCI_MEM_OFFSET; + + isa_io_base = + (unsigned long) ioremap(M82xx_PCI_IO_BASE, + M82xx_PCI_IO_SIZE); + hose->io_base_virt = (void *) isa_io_base; + + /* setup resources */ + pci_init_resource(&hose->mem_resources[0], + M82xx_PCI_LOWER_MEM, + M82xx_PCI_UPPER_MEM, + IORESOURCE_MEM|IORESOURCE_PREFETCH, "PCI prefetchable memory"); + + pci_init_resource(&hose->mem_resources[1], + M82xx_PCI_LOWER_MMIO, + M82xx_PCI_UPPER_MMIO, + IORESOURCE_MEM, "PCI memory"); + + pci_init_resource(&hose->io_resource, + M82xx_PCI_LOWER_IO, + M82xx_PCI_UPPER_IO, + IORESOURCE_IO | 1, "PCI I/O"); + + ppc_md.pci_exclude_device = pq2pci_exclude_device; + hose->last_busno = pciauto_bus_scan(hose, hose->first_busno); + + ppc_md.pci_map_irq = pq2pci_map_irq; + ppc_md.pcibios_fixup = NULL; + ppc_md.pcibios_fixup_bus = NULL; + +} diff --git a/arch/ppc/syslib/m82xx_pci.h b/arch/ppc/syslib/m82xx_pci.h new file mode 100644 index 00000000000..924f73f8e59 --- /dev/null +++ b/arch/ppc/syslib/m82xx_pci.h @@ -0,0 +1,92 @@ + +#ifndef _PPC_KERNEL_M82XX_PCI_H +#define _PPC_KERNEL_M82XX_PCI_H + +#include <asm/m8260_pci.h> +/* + * Local->PCI map (from CPU) controlled by + * MPC826x master window + * + * 0xF6000000 - 0xF7FFFFFF IO space + * 0x80000000 - 0xBFFFFFFF CPU2PCI memory space PCIBR0 + * + * 0x80000000 - 0x9FFFFFFF PCI Mem with prefetch (Outbound ATU #1) + * 0xA0000000 - 0xBFFFFFFF PCI Mem w/o prefetch (Outbound ATU #2) + * 0xF6000000 - 0xF7FFFFFF 32-bit PCI IO (Outbound ATU #3) + * + * PCI->Local map (from PCI) + * MPC826x slave window controlled by + * + * 0x00000000 - 0x07FFFFFF MPC826x local memory (Inbound ATU #1) + */ + +/* + * Slave window that allows PCI masters to access MPC826x local memory. + * This window is set up using the first set of Inbound ATU registers + */ + +#ifndef M82xx_PCI_SLAVE_MEM_LOCAL +#define M82xx_PCI_SLAVE_MEM_LOCAL (((struct bd_info *)__res)->bi_memstart) +#define M82xx_PCI_SLAVE_MEM_BUS (((struct bd_info *)__res)->bi_memstart) +#define M82xx_PCI_SLAVE_MEM_SIZE (((struct bd_info *)__res)->bi_memsize) +#endif + +/* + * This is the window that allows the CPU to access PCI address space. + * It will be setup with the SIU PCIBR0 register. All three PCI master + * windows, which allow the CPU to access PCI prefetch, non prefetch, + * and IO space (see below), must all fit within this window. + */ + +#ifndef M82xx_PCI_LOWER_MEM +#define M82xx_PCI_LOWER_MEM 0x80000000 +#define M82xx_PCI_UPPER_MEM 0x9fffffff +#define M82xx_PCI_MEM_OFFSET 0x00000000 +#define M82xx_PCI_MEM_SIZE 0x20000000 +#endif + +#ifndef M82xx_PCI_LOWER_MMIO +#define M82xx_PCI_LOWER_MMIO 0xa0000000 +#define M82xx_PCI_UPPER_MMIO 0xafffffff +#define M82xx_PCI_MMIO_OFFSET 0x00000000 +#define M82xx_PCI_MMIO_SIZE 0x20000000 +#endif + +#ifndef M82xx_PCI_LOWER_IO +#define M82xx_PCI_LOWER_IO 0x00000000 +#define M82xx_PCI_UPPER_IO 0x01ffffff +#define M82xx_PCI_IO_BASE 0xf6000000 +#define M82xx_PCI_IO_SIZE 0x02000000 +#endif + +#ifndef M82xx_PCI_PRIM_WND_SIZE +#define M82xx_PCI_PRIM_WND_SIZE ~(M82xx_PCI_IO_SIZE - 1U) +#define M82xx_PCI_PRIM_WND_BASE (M82xx_PCI_IO_BASE) +#endif + +#ifndef M82xx_PCI_SEC_WND_SIZE +#define M82xx_PCI_SEC_WND_SIZE ~(M82xx_PCI_MEM_SIZE + M82xx_PCI_MMIO_SIZE - 1U) +#define M82xx_PCI_SEC_WND_BASE (M82xx_PCI_LOWER_MEM) +#endif + +#ifndef POTA_ADDR_SHIFT +#define POTA_ADDR_SHIFT 12 +#endif + +#ifndef PITA_ADDR_SHIFT +#define PITA_ADDR_SHIFT 12 +#endif + +#ifndef _IO_BASE +#define _IO_BASE isa_io_base +#endif + +#ifdef CONFIG_8260_PCI9 +struct pci_controller; +extern void setup_m8260_indirect_pci(struct pci_controller* hose, + u32 cfg_addr, u32 cfg_data); +#else +#define setup_m8260_indirect_pci setup_indirect_pci +#endif + +#endif /* _PPC_KERNEL_M8260_PCI_H */ diff --git a/arch/ppc/syslib/open_pic.c b/arch/ppc/syslib/open_pic.c index 9d4ed68b580..000ba47c67c 100644 --- a/arch/ppc/syslib/open_pic.c +++ b/arch/ppc/syslib/open_pic.c @@ -275,7 +275,7 @@ static void __init openpic_enable_sie(void) } #endif -#if defined(CONFIG_EPIC_SERIAL_MODE) || defined(CONFIG_PM) +#if defined(CONFIG_EPIC_SERIAL_MODE) static void openpic_reset(void) { openpic_setfield(&OpenPIC->Global.Global_Configuration0, @@ -993,8 +993,6 @@ int openpic_resume(struct sys_device *sysdev) return 0; } - openpic_reset(); - /* OpenPIC sometimes seem to need some time to be fully back up... */ do { openpic_set_spurious(OPENPIC_VEC_SPURIOUS); diff --git a/arch/ppc/syslib/ppc83xx_setup.c b/arch/ppc/syslib/ppc83xx_setup.c index c28f9d67948..843cf8873e6 100644 --- a/arch/ppc/syslib/ppc83xx_setup.c +++ b/arch/ppc/syslib/ppc83xx_setup.c @@ -29,6 +29,7 @@ #include <asm/mmu.h> #include <asm/ppc_sys.h> #include <asm/kgdb.h> +#include <asm/delay.h> #include <syslib/ppc83xx_setup.h> @@ -117,7 +118,34 @@ mpc83xx_early_serial_map(void) void mpc83xx_restart(char *cmd) { + volatile unsigned char __iomem *reg; + unsigned char tmp; + + reg = ioremap(BCSR_PHYS_ADDR, BCSR_SIZE); + local_irq_disable(); + + /* + * Unlock the BCSR bits so a PRST will update the contents. + * Otherwise the reset asserts but doesn't clear. + */ + tmp = in_8(reg + BCSR_MISC_REG3_OFF); + tmp |= BCSR_MISC_REG3_CNFLOCK; /* low true, high false */ + out_8(reg + BCSR_MISC_REG3_OFF, tmp); + + /* + * Trigger a reset via a low->high transition of the + * PORESET bit. + */ + tmp = in_8(reg + BCSR_MISC_REG2_OFF); + tmp &= ~BCSR_MISC_REG2_PORESET; + out_8(reg + BCSR_MISC_REG2_OFF, tmp); + + udelay(1); + + tmp |= BCSR_MISC_REG2_PORESET; + out_8(reg + BCSR_MISC_REG2_OFF, tmp); + for(;;); } diff --git a/arch/ppc/syslib/ppc85xx_setup.c b/arch/ppc/syslib/ppc85xx_setup.c index 152c3ef1312..f3277f469e7 100644 --- a/arch/ppc/syslib/ppc85xx_setup.c +++ b/arch/ppc/syslib/ppc85xx_setup.c @@ -132,6 +132,12 @@ mpc85xx_halt(void) } #ifdef CONFIG_PCI + +#if defined(CONFIG_MPC8555_CDS) +extern void mpc85xx_cds_enable_via(struct pci_controller *hose); +extern void mpc85xx_cds_fixup_via(struct pci_controller *hose); +#endif + static void __init mpc85xx_setup_pci1(struct pci_controller *hose) { @@ -302,8 +308,18 @@ mpc85xx_setup_hose(void) ppc_md.pci_exclude_device = mpc85xx_exclude_device; +#if defined(CONFIG_MPC8555_CDS) + /* Pre pciauto_bus_scan VIA init */ + mpc85xx_cds_enable_via(hose_a); +#endif + hose_a->last_busno = pciauto_bus_scan(hose_a, hose_a->first_busno); +#if defined(CONFIG_MPC8555_CDS) + /* Post pciauto_bus_scan VIA fixup */ + mpc85xx_cds_fixup_via(hose_a); +#endif + #ifdef CONFIG_85xx_PCI2 hose_b = pcibios_alloc_controller(); diff --git a/arch/ppc/syslib/prom_init.c b/arch/ppc/syslib/prom_init.c index 2cee87137f2..7f15136830f 100644 --- a/arch/ppc/syslib/prom_init.c +++ b/arch/ppc/syslib/prom_init.c @@ -626,8 +626,18 @@ inspect_node(phandle node, struct device_node *dad, l = call_prom("package-to-path", 3, 1, node, mem_start, mem_end - mem_start); if (l >= 0) { + char *p, *ep; + np->full_name = PTRUNRELOC((char *) mem_start); *(char *)(mem_start + l) = 0; + /* Fixup an Apple bug where they have bogus \0 chars in the + * middle of the path in some properties + */ + for (p = (char *)mem_start, ep = p + l; p < ep; p++) + if ((*p) == '\0') { + memmove(p, p+1, ep - p); + ep--; + } mem_start = ALIGNUL(mem_start + l + 1); } diff --git a/arch/ppc64/kernel/pSeries_reconfig.c b/arch/ppc64/kernel/pSeries_reconfig.c index cb5443f2e49..dc2a69d412a 100644 --- a/arch/ppc64/kernel/pSeries_reconfig.c +++ b/arch/ppc64/kernel/pSeries_reconfig.c @@ -47,14 +47,6 @@ static void remove_node_proc_entries(struct device_node *np) remove_proc_entry(pp->name, np->pde); pp = pp->next; } - - /* Assuming that symlinks have the same parent directory as - * np->pde. - */ - if (np->name_link) - remove_proc_entry(np->name_link->name, parent->pde); - if (np->addr_link) - remove_proc_entry(np->addr_link->name, parent->pde); if (np->pde) remove_proc_entry(np->pde->name, parent->pde); } diff --git a/arch/ppc64/kernel/prom_init.c b/arch/ppc64/kernel/prom_init.c index 6f79b7b9b44..1ac531ba705 100644 --- a/arch/ppc64/kernel/prom_init.c +++ b/arch/ppc64/kernel/prom_init.c @@ -211,13 +211,23 @@ struct { */ #define ADDR(x) (u32) ((unsigned long)(x) - offset) +/* + * Error results ... some OF calls will return "-1" on error, some + * will return 0, some will return either. To simplify, here are + * macros to use with any ihandle or phandle return value to check if + * it is valid + */ + +#define PROM_ERROR (-1u) +#define PHANDLE_VALID(p) ((p) != 0 && (p) != PROM_ERROR) +#define IHANDLE_VALID(i) ((i) != 0 && (i) != PROM_ERROR) + + /* This is the one and *ONLY* place where we actually call open * firmware from, since we need to make sure we're running in 32b * mode when we do. We switch back to 64b mode upon return. */ -#define PROM_ERROR (-1) - static int __init call_prom(const char *service, int nargs, int nret, ...) { int i; @@ -587,14 +597,13 @@ static void __init prom_send_capabilities(void) { unsigned long offset = reloc_offset(); ihandle elfloader; - int ret; elfloader = call_prom("open", 1, 1, ADDR("/packages/elf-loader")); if (elfloader == 0) { prom_printf("couldn't open /packages/elf-loader\n"); return; } - ret = call_prom("call-method", 3, 1, ADDR("process-elf-header"), + call_prom("call-method", 3, 1, ADDR("process-elf-header"), elfloader, ADDR(&fake_elf)); call_prom("close", 1, 0, elfloader); } @@ -646,7 +655,7 @@ static unsigned long __init alloc_up(unsigned long size, unsigned long align) base = _ALIGN_UP(base + 0x100000, align)) { prom_debug(" trying: 0x%x\n\r", base); addr = (unsigned long)prom_claim(base, size, 0); - if ((int)addr != PROM_ERROR) + if (addr != PROM_ERROR) break; addr = 0; if (align == 0) @@ -708,7 +717,7 @@ static unsigned long __init alloc_down(unsigned long size, unsigned long align, for(; base > RELOC(alloc_bottom); base = _ALIGN_DOWN(base - 0x100000, align)) { prom_debug(" trying: 0x%x\n\r", base); addr = (unsigned long)prom_claim(base, size, 0); - if ((int)addr != PROM_ERROR) + if (addr != PROM_ERROR) break; addr = 0; } @@ -902,18 +911,19 @@ static void __init prom_instantiate_rtas(void) { unsigned long offset = reloc_offset(); struct prom_t *_prom = PTRRELOC(&prom); - phandle prom_rtas, rtas_node; + phandle rtas_node; + ihandle rtas_inst; u32 base, entry = 0; u32 size = 0; prom_debug("prom_instantiate_rtas: start...\n"); - prom_rtas = call_prom("finddevice", 1, 1, ADDR("/rtas")); - prom_debug("prom_rtas: %x\n", prom_rtas); - if (prom_rtas == (phandle) -1) + rtas_node = call_prom("finddevice", 1, 1, ADDR("/rtas")); + prom_debug("rtas_node: %x\n", rtas_node); + if (!PHANDLE_VALID(rtas_node)) return; - prom_getprop(prom_rtas, "rtas-size", &size, sizeof(size)); + prom_getprop(rtas_node, "rtas-size", &size, sizeof(size)); if (size == 0) return; @@ -922,14 +932,18 @@ static void __init prom_instantiate_rtas(void) prom_printf("RTAS allocation failed !\n"); return; } - prom_printf("instantiating rtas at 0x%x", base); - rtas_node = call_prom("open", 1, 1, ADDR("/rtas")); - prom_printf("..."); + rtas_inst = call_prom("open", 1, 1, ADDR("/rtas")); + if (!IHANDLE_VALID(rtas_inst)) { + prom_printf("opening rtas package failed"); + return; + } + + prom_printf("instantiating rtas at 0x%x ...", base); if (call_prom("call-method", 3, 2, ADDR("instantiate-rtas"), - rtas_node, base) != PROM_ERROR) { + rtas_inst, base) != PROM_ERROR) { entry = (long)_prom->args.rets[1]; } if (entry == 0) { @@ -940,8 +954,8 @@ static void __init prom_instantiate_rtas(void) reserve_mem(base, size); - prom_setprop(prom_rtas, "linux,rtas-base", &base, sizeof(base)); - prom_setprop(prom_rtas, "linux,rtas-entry", &entry, sizeof(entry)); + prom_setprop(rtas_node, "linux,rtas-base", &base, sizeof(base)); + prom_setprop(rtas_node, "linux,rtas-entry", &entry, sizeof(entry)); prom_debug("rtas base = 0x%x\n", base); prom_debug("rtas entry = 0x%x\n", entry); @@ -1062,7 +1076,7 @@ static void __init prom_initialize_tce_table(void) prom_printf("opening PHB %s", path); phb_node = call_prom("open", 1, 1, path); - if ( (long)phb_node <= 0) + if (phb_node == 0) prom_printf("... failed\n"); else prom_printf("... done\n"); @@ -1279,12 +1293,12 @@ static void __init prom_init_client_services(unsigned long pp) /* get a handle for the stdout device */ _prom->chosen = call_prom("finddevice", 1, 1, ADDR("/chosen")); - if ((long)_prom->chosen <= 0) + if (!PHANDLE_VALID(_prom->chosen)) prom_panic("cannot find chosen"); /* msg won't be printed :( */ /* get device tree root */ _prom->root = call_prom("finddevice", 1, 1, ADDR("/")); - if ((long)_prom->root <= 0) + if (!PHANDLE_VALID(_prom->root)) prom_panic("cannot find device tree root"); /* msg won't be printed :( */ } @@ -1356,9 +1370,8 @@ static int __init prom_find_machine_type(void) } /* Default to pSeries. We need to know if we are running LPAR */ rtas = call_prom("finddevice", 1, 1, ADDR("/rtas")); - if (rtas != (phandle) -1) { - unsigned long x; - x = prom_getproplen(rtas, "ibm,hypertas-functions"); + if (!PHANDLE_VALID(rtas)) { + int x = prom_getproplen(rtas, "ibm,hypertas-functions"); if (x != PROM_ERROR) { prom_printf("Hypertas detected, assuming LPAR !\n"); return PLATFORM_PSERIES_LPAR; @@ -1426,12 +1439,13 @@ static void __init prom_check_displays(void) * leave some room at the end of the path for appending extra * arguments */ - if (call_prom("package-to-path", 3, 1, node, path, PROM_SCRATCH_SIZE-10) < 0) + if (call_prom("package-to-path", 3, 1, node, path, + PROM_SCRATCH_SIZE-10) == PROM_ERROR) continue; prom_printf("found display : %s, opening ... ", path); ih = call_prom("open", 1, 1, path); - if (ih == (ihandle)0 || ih == (ihandle)-1) { + if (ih == 0) { prom_printf("failed\n"); continue; } @@ -1514,6 +1528,12 @@ static unsigned long __init dt_find_string(char *str) return 0; } +/* + * The Open Firmware 1275 specification states properties must be 31 bytes or + * less, however not all firmwares obey this. Make it 64 bytes to be safe. + */ +#define MAX_PROPERTY_NAME 64 + static void __init scan_dt_build_strings(phandle node, unsigned long *mem_start, unsigned long *mem_end) { @@ -1527,10 +1547,12 @@ static void __init scan_dt_build_strings(phandle node, unsigned long *mem_start, /* get and store all property names */ prev_name = RELOC(""); for (;;) { - - /* 32 is max len of name including nul. */ - namep = make_room(mem_start, mem_end, 32, 1); - if (call_prom("nextprop", 3, 1, node, prev_name, namep) <= 0) { + int rc; + + /* 64 is max len of name including nul. */ + namep = make_room(mem_start, mem_end, MAX_PROPERTY_NAME, 1); + rc = call_prom("nextprop", 3, 1, node, prev_name, namep); + if (rc != 1) { /* No more nodes: unwind alloc */ *mem_start = (unsigned long)namep; break; @@ -1555,18 +1577,12 @@ static void __init scan_dt_build_strings(phandle node, unsigned long *mem_start, } } -/* - * The Open Firmware 1275 specification states properties must be 31 bytes or - * less, however not all firmwares obey this. Make it 64 bytes to be safe. - */ -#define MAX_PROPERTY_NAME 64 - static void __init scan_dt_build_struct(phandle node, unsigned long *mem_start, unsigned long *mem_end) { int l, align; phandle child; - char *namep, *prev_name, *sstart; + char *namep, *prev_name, *sstart, *p, *ep; unsigned long soff; unsigned char *valp; unsigned long offset = reloc_offset(); @@ -1588,6 +1604,14 @@ static void __init scan_dt_build_struct(phandle node, unsigned long *mem_start, call_prom("package-to-path", 3, 1, node, namep, l); } namep[l] = '\0'; + /* Fixup an Apple bug where they have bogus \0 chars in the + * middle of the path in some properties + */ + for (p = namep, ep = namep + l; p < ep; p++) + if (*p == '\0') { + memmove(p, p+1, ep - p); + ep--; l--; + } *mem_start = _ALIGN(((unsigned long) namep) + strlen(namep) + 1, 4); } @@ -1599,7 +1623,10 @@ static void __init scan_dt_build_struct(phandle node, unsigned long *mem_start, prev_name = RELOC(""); sstart = (char *)RELOC(dt_string_start); for (;;) { - if (call_prom("nextprop", 3, 1, node, prev_name, pname) <= 0) + int rc; + + rc = call_prom("nextprop", 3, 1, node, prev_name, pname); + if (rc != 1) break; /* find string offset */ @@ -1615,7 +1642,7 @@ static void __init scan_dt_build_struct(phandle node, unsigned long *mem_start, l = call_prom("getproplen", 2, 1, node, pname); /* sanity checks */ - if (l < 0) + if (l == PROM_ERROR) continue; if (l > MAX_PROPERTY_LENGTH) { prom_printf("WARNING: ignoring large property "); @@ -1763,17 +1790,18 @@ static void __init fixup_device_tree(void) /* Some G5s have a missing interrupt definition, fix it up here */ u3 = call_prom("finddevice", 1, 1, ADDR("/u3@0,f8000000")); - if ((long)u3 <= 0) + if (!PHANDLE_VALID(u3)) return; i2c = call_prom("finddevice", 1, 1, ADDR("/u3@0,f8000000/i2c@f8001000")); - if ((long)i2c <= 0) + if (!PHANDLE_VALID(i2c)) return; mpic = call_prom("finddevice", 1, 1, ADDR("/u3@0,f8000000/mpic@f8040000")); - if ((long)mpic <= 0) + if (!PHANDLE_VALID(mpic)) return; /* check if proper rev of u3 */ - if (prom_getprop(u3, "device-rev", &u3_rev, sizeof(u3_rev)) <= 0) + if (prom_getprop(u3, "device-rev", &u3_rev, sizeof(u3_rev)) + == PROM_ERROR) return; if (u3_rev != 0x35) return; @@ -1881,6 +1909,12 @@ unsigned long __init prom_init(unsigned long r3, unsigned long r4, unsigned long &getprop_rval, sizeof(getprop_rval)); /* + * On pSeries, inform the firmware about our capabilities + */ + if (RELOC(of_platform) & PLATFORM_PSERIES) + prom_send_capabilities(); + + /* * On pSeries, copy the CPU hold code */ if (RELOC(of_platform) & PLATFORM_PSERIES) diff --git a/arch/ppc64/kernel/time.c b/arch/ppc64/kernel/time.c index 3d54745108c..33364a7d2cd 100644 --- a/arch/ppc64/kernel/time.c +++ b/arch/ppc64/kernel/time.c @@ -325,9 +325,7 @@ int timer_interrupt(struct pt_regs * regs) irq_enter(); -#ifndef CONFIG_PPC_ISERIES profile_tick(CPU_PROFILING, regs); -#endif lpaca->lppaca.int_dword.fields.decr_int = 0; diff --git a/arch/sparc64/kernel/pci_iommu.c b/arch/sparc64/kernel/pci_iommu.c index 33ca56c90da..2803bc7c2c7 100644 --- a/arch/sparc64/kernel/pci_iommu.c +++ b/arch/sparc64/kernel/pci_iommu.c @@ -196,6 +196,34 @@ static iopte_t *alloc_consistent_cluster(struct pci_iommu *iommu, unsigned long return NULL; } +static int iommu_alloc_ctx(struct pci_iommu *iommu) +{ + int lowest = iommu->ctx_lowest_free; + int sz = IOMMU_NUM_CTXS - lowest; + int n = find_next_zero_bit(iommu->ctx_bitmap, sz, lowest); + + if (unlikely(n == sz)) { + n = find_next_zero_bit(iommu->ctx_bitmap, lowest, 1); + if (unlikely(n == lowest)) { + printk(KERN_WARNING "IOMMU: Ran out of contexts.\n"); + n = 0; + } + } + if (n) + __set_bit(n, iommu->ctx_bitmap); + + return n; +} + +static inline void iommu_free_ctx(struct pci_iommu *iommu, int ctx) +{ + if (likely(ctx)) { + __clear_bit(ctx, iommu->ctx_bitmap); + if (ctx < iommu->ctx_lowest_free) + iommu->ctx_lowest_free = ctx; + } +} + /* Allocate and map kernel buffer of size SIZE using consistent mode * DMA for PCI device PDEV. Return non-NULL cpu-side address if * successful and set *DMA_ADDRP to the PCI side dma address. @@ -236,7 +264,7 @@ void *pci_alloc_consistent(struct pci_dev *pdev, size_t size, dma_addr_t *dma_ad npages = size >> IO_PAGE_SHIFT; ctx = 0; if (iommu->iommu_ctxflush) - ctx = iommu->iommu_cur_ctx++; + ctx = iommu_alloc_ctx(iommu); first_page = __pa(first_page); while (npages--) { iopte_val(*iopte) = (IOPTE_CONSISTENT(ctx) | @@ -317,6 +345,8 @@ void pci_free_consistent(struct pci_dev *pdev, size_t size, void *cpu, dma_addr_ } } + iommu_free_ctx(iommu, ctx); + spin_unlock_irqrestore(&iommu->lock, flags); order = get_order(size); @@ -360,7 +390,7 @@ dma_addr_t pci_map_single(struct pci_dev *pdev, void *ptr, size_t sz, int direct base_paddr = __pa(oaddr & IO_PAGE_MASK); ctx = 0; if (iommu->iommu_ctxflush) - ctx = iommu->iommu_cur_ctx++; + ctx = iommu_alloc_ctx(iommu); if (strbuf->strbuf_enabled) iopte_protection = IOPTE_STREAMING(ctx); else @@ -380,39 +410,53 @@ bad: return PCI_DMA_ERROR_CODE; } -static void pci_strbuf_flush(struct pci_strbuf *strbuf, struct pci_iommu *iommu, u32 vaddr, unsigned long ctx, unsigned long npages) +static void pci_strbuf_flush(struct pci_strbuf *strbuf, struct pci_iommu *iommu, u32 vaddr, unsigned long ctx, unsigned long npages, int direction) { int limit; - PCI_STC_FLUSHFLAG_INIT(strbuf); if (strbuf->strbuf_ctxflush && iommu->iommu_ctxflush) { unsigned long matchreg, flushreg; + u64 val; flushreg = strbuf->strbuf_ctxflush; matchreg = PCI_STC_CTXMATCH_ADDR(strbuf, ctx); - limit = 100000; pci_iommu_write(flushreg, ctx); - for(;;) { - if (((long)pci_iommu_read(matchreg)) >= 0L) - break; - limit--; - if (!limit) - break; - udelay(1); + val = pci_iommu_read(matchreg); + val &= 0xffff; + if (!val) + goto do_flush_sync; + + while (val) { + if (val & 0x1) + pci_iommu_write(flushreg, ctx); + val >>= 1; } - if (!limit) + val = pci_iommu_read(matchreg); + if (unlikely(val)) { printk(KERN_WARNING "pci_strbuf_flush: ctx flush " - "timeout vaddr[%08x] ctx[%lx]\n", - vaddr, ctx); + "timeout matchreg[%lx] ctx[%lx]\n", + val, ctx); + goto do_page_flush; + } } else { unsigned long i; + do_page_flush: for (i = 0; i < npages; i++, vaddr += IO_PAGE_SIZE) pci_iommu_write(strbuf->strbuf_pflush, vaddr); } +do_flush_sync: + /* If the device could not have possibly put dirty data into + * the streaming cache, no flush-flag synchronization needs + * to be performed. + */ + if (direction == PCI_DMA_TODEVICE) + return; + + PCI_STC_FLUSHFLAG_INIT(strbuf); pci_iommu_write(strbuf->strbuf_fsync, strbuf->strbuf_flushflag_pa); (void) pci_iommu_read(iommu->write_complete_reg); @@ -466,7 +510,7 @@ void pci_unmap_single(struct pci_dev *pdev, dma_addr_t bus_addr, size_t sz, int /* Step 1: Kick data out of streaming buffers if necessary. */ if (strbuf->strbuf_enabled) - pci_strbuf_flush(strbuf, iommu, bus_addr, ctx, npages); + pci_strbuf_flush(strbuf, iommu, bus_addr, ctx, npages, direction); /* Step 2: Clear out first TSB entry. */ iopte_make_dummy(iommu, base); @@ -474,6 +518,8 @@ void pci_unmap_single(struct pci_dev *pdev, dma_addr_t bus_addr, size_t sz, int free_streaming_cluster(iommu, bus_addr - iommu->page_table_map_base, npages, ctx); + iommu_free_ctx(iommu, ctx); + spin_unlock_irqrestore(&iommu->lock, flags); } @@ -613,7 +659,7 @@ int pci_map_sg(struct pci_dev *pdev, struct scatterlist *sglist, int nelems, int /* Step 4: Choose a context if necessary. */ ctx = 0; if (iommu->iommu_ctxflush) - ctx = iommu->iommu_cur_ctx++; + ctx = iommu_alloc_ctx(iommu); /* Step 5: Create the mappings. */ if (strbuf->strbuf_enabled) @@ -678,7 +724,7 @@ void pci_unmap_sg(struct pci_dev *pdev, struct scatterlist *sglist, int nelems, /* Step 1: Kick data out of streaming buffers if necessary. */ if (strbuf->strbuf_enabled) - pci_strbuf_flush(strbuf, iommu, bus_addr, ctx, npages); + pci_strbuf_flush(strbuf, iommu, bus_addr, ctx, npages, direction); /* Step 2: Clear out first TSB entry. */ iopte_make_dummy(iommu, base); @@ -686,6 +732,8 @@ void pci_unmap_sg(struct pci_dev *pdev, struct scatterlist *sglist, int nelems, free_streaming_cluster(iommu, bus_addr - iommu->page_table_map_base, npages, ctx); + iommu_free_ctx(iommu, ctx); + spin_unlock_irqrestore(&iommu->lock, flags); } @@ -724,7 +772,7 @@ void pci_dma_sync_single_for_cpu(struct pci_dev *pdev, dma_addr_t bus_addr, size } /* Step 2: Kick data out of streaming buffers. */ - pci_strbuf_flush(strbuf, iommu, bus_addr, ctx, npages); + pci_strbuf_flush(strbuf, iommu, bus_addr, ctx, npages, direction); spin_unlock_irqrestore(&iommu->lock, flags); } @@ -768,7 +816,7 @@ void pci_dma_sync_sg_for_cpu(struct pci_dev *pdev, struct scatterlist *sglist, i i--; npages = (IO_PAGE_ALIGN(sglist[i].dma_address + sglist[i].dma_length) - bus_addr) >> IO_PAGE_SHIFT; - pci_strbuf_flush(strbuf, iommu, bus_addr, ctx, npages); + pci_strbuf_flush(strbuf, iommu, bus_addr, ctx, npages, direction); spin_unlock_irqrestore(&iommu->lock, flags); } diff --git a/arch/sparc64/kernel/pci_psycho.c b/arch/sparc64/kernel/pci_psycho.c index 3567fa879e1..534320ef0db 100644 --- a/arch/sparc64/kernel/pci_psycho.c +++ b/arch/sparc64/kernel/pci_psycho.c @@ -1212,7 +1212,7 @@ static void __init psycho_iommu_init(struct pci_controller_info *p) /* Setup initial software IOMMU state. */ spin_lock_init(&iommu->lock); - iommu->iommu_cur_ctx = 0; + iommu->ctx_lowest_free = 1; /* Register addresses. */ iommu->iommu_control = p->pbm_A.controller_regs + PSYCHO_IOMMU_CONTROL; diff --git a/arch/sparc64/kernel/pci_sabre.c b/arch/sparc64/kernel/pci_sabre.c index 5525d1ec4af..53d333b4a4e 100644 --- a/arch/sparc64/kernel/pci_sabre.c +++ b/arch/sparc64/kernel/pci_sabre.c @@ -1265,7 +1265,7 @@ static void __init sabre_iommu_init(struct pci_controller_info *p, /* Setup initial software IOMMU state. */ spin_lock_init(&iommu->lock); - iommu->iommu_cur_ctx = 0; + iommu->ctx_lowest_free = 1; /* Register addresses. */ iommu->iommu_control = p->pbm_A.controller_regs + SABRE_IOMMU_CONTROL; diff --git a/arch/sparc64/kernel/pci_schizo.c b/arch/sparc64/kernel/pci_schizo.c index e93fcadc372..5753175b94e 100644 --- a/arch/sparc64/kernel/pci_schizo.c +++ b/arch/sparc64/kernel/pci_schizo.c @@ -1753,7 +1753,7 @@ static void schizo_pbm_iommu_init(struct pci_pbm_info *pbm) /* Setup initial software IOMMU state. */ spin_lock_init(&iommu->lock); - iommu->iommu_cur_ctx = 0; + iommu->ctx_lowest_free = 1; /* Register addresses, SCHIZO has iommu ctx flushing. */ iommu->iommu_control = pbm->pbm_regs + SCHIZO_IOMMU_CONTROL; diff --git a/arch/sparc64/kernel/sbus.c b/arch/sparc64/kernel/sbus.c index 76ea6455433..89f5e019f24 100644 --- a/arch/sparc64/kernel/sbus.c +++ b/arch/sparc64/kernel/sbus.c @@ -117,17 +117,25 @@ static void iommu_flush(struct sbus_iommu *iommu, u32 base, unsigned long npages #define STRBUF_TAG_VALID 0x02UL -static void sbus_strbuf_flush(struct sbus_iommu *iommu, u32 base, unsigned long npages) +static void sbus_strbuf_flush(struct sbus_iommu *iommu, u32 base, unsigned long npages, int direction) { unsigned long n; int limit; - iommu->strbuf_flushflag = 0UL; n = npages; while (n--) upa_writeq(base + (n << IO_PAGE_SHIFT), iommu->strbuf_regs + STRBUF_PFLUSH); + /* If the device could not have possibly put dirty data into + * the streaming cache, no flush-flag synchronization needs + * to be performed. + */ + if (direction == SBUS_DMA_TODEVICE) + return; + + iommu->strbuf_flushflag = 0UL; + /* Whoopee cushion! */ upa_writeq(__pa(&iommu->strbuf_flushflag), iommu->strbuf_regs + STRBUF_FSYNC); @@ -421,7 +429,7 @@ void sbus_unmap_single(struct sbus_dev *sdev, dma_addr_t dma_addr, size_t size, spin_lock_irqsave(&iommu->lock, flags); free_streaming_cluster(iommu, dma_base, size >> IO_PAGE_SHIFT); - sbus_strbuf_flush(iommu, dma_base, size >> IO_PAGE_SHIFT); + sbus_strbuf_flush(iommu, dma_base, size >> IO_PAGE_SHIFT, direction); spin_unlock_irqrestore(&iommu->lock, flags); } @@ -584,7 +592,7 @@ void sbus_unmap_sg(struct sbus_dev *sdev, struct scatterlist *sg, int nents, int iommu = sdev->bus->iommu; spin_lock_irqsave(&iommu->lock, flags); free_streaming_cluster(iommu, dvma_base, size >> IO_PAGE_SHIFT); - sbus_strbuf_flush(iommu, dvma_base, size >> IO_PAGE_SHIFT); + sbus_strbuf_flush(iommu, dvma_base, size >> IO_PAGE_SHIFT, direction); spin_unlock_irqrestore(&iommu->lock, flags); } @@ -596,7 +604,7 @@ void sbus_dma_sync_single_for_cpu(struct sbus_dev *sdev, dma_addr_t base, size_t size = (IO_PAGE_ALIGN(base + size) - (base & IO_PAGE_MASK)); spin_lock_irqsave(&iommu->lock, flags); - sbus_strbuf_flush(iommu, base & IO_PAGE_MASK, size >> IO_PAGE_SHIFT); + sbus_strbuf_flush(iommu, base & IO_PAGE_MASK, size >> IO_PAGE_SHIFT, direction); spin_unlock_irqrestore(&iommu->lock, flags); } @@ -620,7 +628,7 @@ void sbus_dma_sync_sg_for_cpu(struct sbus_dev *sdev, struct scatterlist *sg, int size = IO_PAGE_ALIGN(sg[i].dma_address + sg[i].dma_length) - base; spin_lock_irqsave(&iommu->lock, flags); - sbus_strbuf_flush(iommu, base, size >> IO_PAGE_SHIFT); + sbus_strbuf_flush(iommu, base, size >> IO_PAGE_SHIFT, direction); spin_unlock_irqrestore(&iommu->lock, flags); } diff --git a/arch/um/Kconfig.debug b/arch/um/Kconfig.debug index b89989de364..bd41e4286d0 100644 --- a/arch/um/Kconfig.debug +++ b/arch/um/Kconfig.debug @@ -2,10 +2,6 @@ menu "Kernel hacking" source "lib/Kconfig.debug" -config FRAME_POINTER - bool - default y if DEBUG_INFO - config PT_PROXY bool "Enable ptrace proxy" depends on XTERM_CHAN && DEBUG_INFO && MODE_TT diff --git a/arch/um/drivers/random.c b/arch/um/drivers/random.c index d43e9fab05a..f9e22198e01 100644 --- a/arch/um/drivers/random.c +++ b/arch/um/drivers/random.c @@ -1,5 +1,10 @@ -/* Much of this ripped from hw_random.c */ - +/* Copyright (C) 2005 Jeff Dike <jdike@addtoit.com> */ +/* Much of this ripped from drivers/char/hw_random.c, see there for other + * copyright. + * + * This software may be used and distributed according to the terms + * of the GNU General Public License, incorporated herein by reference. + */ #include <linux/module.h> #include <linux/fs.h> #include <linux/miscdevice.h> @@ -12,8 +17,6 @@ */ #define RNG_VERSION "1.0.0" #define RNG_MODULE_NAME "random" -#define RNG_DRIVER_NAME RNG_MODULE_NAME " virtual driver " RNG_VERSION -#define PFX RNG_MODULE_NAME ": " #define RNG_MISCDEV_MINOR 183 /* official */ @@ -98,7 +101,7 @@ static int __init rng_init (void) err = misc_register (&rng_miscdev); if (err) { - printk (KERN_ERR PFX "misc device register failed\n"); + printk (KERN_ERR RNG_MODULE_NAME ": misc device register failed\n"); goto err_out_cleanup_hw; } @@ -120,3 +123,6 @@ static void __exit rng_cleanup (void) module_init (rng_init); module_exit (rng_cleanup); + +MODULE_DESCRIPTION("UML Host Random Number Generator (RNG) driver"); +MODULE_LICENSE("GPL"); diff --git a/arch/um/drivers/ssl.c b/arch/um/drivers/ssl.c index a2bac429f3d..b32a77010fb 100644 --- a/arch/um/drivers/ssl.c +++ b/arch/um/drivers/ssl.c @@ -22,7 +22,6 @@ #include "init.h" #include "irq_user.h" #include "mconsole_kern.h" -#include "2_5compat.h" static int ssl_version = 1; diff --git a/arch/um/drivers/stdio_console.c b/arch/um/drivers/stdio_console.c index 361d0be342b..afbe1e71ed8 100644 --- a/arch/um/drivers/stdio_console.c +++ b/arch/um/drivers/stdio_console.c @@ -28,7 +28,6 @@ #include "irq_user.h" #include "mconsole_kern.h" #include "init.h" -#include "2_5compat.h" #define MAX_TTYS (16) diff --git a/arch/um/drivers/ubd_kern.c b/arch/um/drivers/ubd_kern.c index 88f956c34fe..2a7f6892c55 100644 --- a/arch/um/drivers/ubd_kern.c +++ b/arch/um/drivers/ubd_kern.c @@ -49,7 +49,6 @@ #include "irq_user.h" #include "irq_kern.h" #include "ubd_user.h" -#include "2_5compat.h" #include "os.h" #include "mem.h" #include "mem_kern.h" @@ -440,9 +439,9 @@ static int udb_setup(char *str) __setup("udb", udb_setup); __uml_help(udb_setup, "udb\n" -" This option is here solely to catch ubd -> udb typos, which can be\n\n" -" to impossible to catch visually unless you specifically look for\n\n" -" them. The only result of any option starting with 'udb' is an error\n\n" +" This option is here solely to catch ubd -> udb typos, which can be\n" +" to impossible to catch visually unless you specifically look for\n" +" them. The only result of any option starting with 'udb' is an error\n" " in the boot output.\n\n" ); diff --git a/arch/um/include/2_5compat.h b/arch/um/include/2_5compat.h deleted file mode 100644 index abdb015a4d7..00000000000 --- a/arch/um/include/2_5compat.h +++ /dev/null @@ -1,24 +0,0 @@ -/* - * Copyright (C) 2001 Jeff Dike (jdike@karaya.com) - * Licensed under the GPL - */ - -#ifndef __2_5_COMPAT_H__ -#define __2_5_COMPAT_H__ - -#define INIT_HARDSECT(arr, maj, sizes) - -#define SET_PRI(task) do ; while(0) - -#endif - -/* - * Overrides for Emacs so that we follow Linus's tabbing style. - * Emacs will notice this stuff at the end of the file and automatically - * adjust the settings for this buffer only. This must remain at the end - * of the file. - * --------------------------------------------------------------------------- - * Local variables: - * c-file-style: "linux" - * End: - */ diff --git a/arch/um/include/sysrq.h b/arch/um/include/sysrq.h index 2ce9423460b..c8d332b56b9 100644 --- a/arch/um/include/sysrq.h +++ b/arch/um/include/sysrq.h @@ -1,6 +1,7 @@ #ifndef __UM_SYSRQ_H #define __UM_SYSRQ_H -extern void show_trace(unsigned long *stack); +struct task_struct; +extern void show_trace(struct task_struct* task, unsigned long *stack); #endif diff --git a/arch/um/kernel/exec_kern.c b/arch/um/kernel/exec_kern.c index 49ddabe69be..efd222ffe20 100644 --- a/arch/um/kernel/exec_kern.c +++ b/arch/um/kernel/exec_kern.c @@ -16,7 +16,6 @@ #include "kern.h" #include "irq_user.h" #include "tlb.h" -#include "2_5compat.h" #include "os.h" #include "time_user.h" #include "choose-mode.h" diff --git a/arch/um/kernel/initrd_kern.c b/arch/um/kernel/initrd_kern.c deleted file mode 100644 index fc568af468b..00000000000 --- a/arch/um/kernel/initrd_kern.c +++ /dev/null @@ -1,59 +0,0 @@ -/* - * Copyright (C) 2000, 2001, 2002 Jeff Dike (jdike@karaya.com) - * Licensed under the GPL - */ - -#include "linux/init.h" -#include "linux/bootmem.h" -#include "linux/initrd.h" -#include "asm/types.h" -#include "user_util.h" -#include "kern_util.h" -#include "initrd.h" -#include "init.h" -#include "os.h" - -/* Changed by uml_initrd_setup, which is a setup */ -static char *initrd __initdata = NULL; - -static int __init read_initrd(void) -{ - void *area; - long long size; - int err; - - if(initrd == NULL) return 0; - err = os_file_size(initrd, &size); - if(err) return 0; - area = alloc_bootmem(size); - if(area == NULL) return 0; - if(load_initrd(initrd, area, size) == -1) return 0; - initrd_start = (unsigned long) area; - initrd_end = initrd_start + size; - return 0; -} - -__uml_postsetup(read_initrd); - -static int __init uml_initrd_setup(char *line, int *add) -{ - initrd = line; - return 0; -} - -__uml_setup("initrd=", uml_initrd_setup, -"initrd=<initrd image>\n" -" This is used to boot UML from an initrd image. The argument is the\n" -" name of the file containing the image.\n\n" -); - -/* - * Overrides for Emacs so that we follow Linus's tabbing style. - * Emacs will notice this stuff at the end of the file and automatically - * adjust the settings for this buffer only. This must remain at the end - * of the file. - * --------------------------------------------------------------------------- - * Local variables: - * c-file-style: "linux" - * End: - */ diff --git a/arch/um/kernel/initrd_user.c b/arch/um/kernel/initrd_user.c deleted file mode 100644 index cb90681e151..00000000000 --- a/arch/um/kernel/initrd_user.c +++ /dev/null @@ -1,46 +0,0 @@ -/* - * Copyright (C) 2000, 2001 Jeff Dike (jdike@karaya.com) - * Licensed under the GPL - */ - -#include <unistd.h> -#include <sys/types.h> -#include <sys/stat.h> -#include <errno.h> - -#include "user_util.h" -#include "kern_util.h" -#include "user.h" -#include "initrd.h" -#include "os.h" - -int load_initrd(char *filename, void *buf, int size) -{ - int fd, n; - - fd = os_open_file(filename, of_read(OPENFLAGS()), 0); - if(fd < 0){ - printk("Opening '%s' failed - err = %d\n", filename, -fd); - return(-1); - } - n = os_read_file(fd, buf, size); - if(n != size){ - printk("Read of %d bytes from '%s' failed, err = %d\n", size, - filename, -n); - return(-1); - } - - os_close_file(fd); - return(0); -} - -/* - * Overrides for Emacs so that we follow Linus's tabbing style. - * Emacs will notice this stuff at the end of the file and automatically - * adjust the settings for this buffer only. This must remain at the end - * of the file. - * --------------------------------------------------------------------------- - * Local variables: - * c-file-style: "linux" - * End: - */ diff --git a/arch/um/kernel/main.c b/arch/um/kernel/main.c index a17c49703f9..e42e6364ca1 100644 --- a/arch/um/kernel/main.c +++ b/arch/um/kernel/main.c @@ -71,7 +71,7 @@ static __init void do_uml_initcalls(void) static void last_ditch_exit(int sig) { - CHOOSE_MODE(kmalloc_ok = 0, (void) 0); + kmalloc_ok = 0; signal(SIGINT, SIG_DFL); signal(SIGTERM, SIG_DFL); signal(SIGHUP, SIG_DFL); @@ -87,7 +87,7 @@ int main(int argc, char **argv, char **envp) { char **new_argv; sigset_t mask; - int ret, i; + int ret, i, err; /* Enable all signals except SIGIO - in some environments, we can * enter with some signals blocked @@ -160,27 +160,29 @@ int main(int argc, char **argv, char **envp) */ change_sig(SIGPROF, 0); - /* Reboot */ - if(ret){ - int err; - - printf("\n"); + /* This signal stuff used to be in the reboot case. However, + * sometimes a SIGVTALRM can come in when we're halting (reproducably + * when writing out gcov information, presumably because that takes + * some time) and cause a segfault. + */ - /* stop timers and set SIG*ALRM to be ignored */ - disable_timer(); + /* stop timers and set SIG*ALRM to be ignored */ + disable_timer(); - /* disable SIGIO for the fds and set SIGIO to be ignored */ - err = deactivate_all_fds(); - if(err) - printf("deactivate_all_fds failed, errno = %d\n", - -err); + /* disable SIGIO for the fds and set SIGIO to be ignored */ + err = deactivate_all_fds(); + if(err) + printf("deactivate_all_fds failed, errno = %d\n", -err); - /* Let any pending signals fire now. This ensures - * that they won't be delivered after the exec, when - * they are definitely not expected. - */ - unblock_signals(); + /* Let any pending signals fire now. This ensures + * that they won't be delivered after the exec, when + * they are definitely not expected. + */ + unblock_signals(); + /* Reboot */ + if(ret){ + printf("\n"); execvp(new_argv[0], new_argv); perror("Failed to exec kernel"); ret = 1; diff --git a/arch/um/kernel/process_kern.c b/arch/um/kernel/process_kern.c index c1adf7ba3fd..804c6bbdf67 100644 --- a/arch/um/kernel/process_kern.c +++ b/arch/um/kernel/process_kern.c @@ -43,7 +43,6 @@ #include "tlb.h" #include "frame_kern.h" #include "sigcontext.h" -#include "2_5compat.h" #include "os.h" #include "mode.h" #include "mode_kern.h" @@ -55,18 +54,6 @@ */ struct cpu_task cpu_tasks[NR_CPUS] = { [0 ... NR_CPUS - 1] = { -1, NULL } }; -struct task_struct *get_task(int pid, int require) -{ - struct task_struct *ret; - - read_lock(&tasklist_lock); - ret = find_task_by_pid(pid); - read_unlock(&tasklist_lock); - - if(require && (ret == NULL)) panic("get_task couldn't find a task\n"); - return(ret); -} - int external_pid(void *t) { struct task_struct *task = t ? t : current; @@ -189,7 +176,6 @@ void default_idle(void) while(1){ /* endless idle loop with no priority at all */ - SET_PRI(current); /* * although we are an idle CPU, we do not want to @@ -212,11 +198,6 @@ int page_size(void) return(PAGE_SIZE); } -unsigned long page_mask(void) -{ - return(PAGE_MASK); -} - void *um_virt_to_phys(struct task_struct *task, unsigned long addr, pte_t *pte_out) { @@ -349,11 +330,6 @@ char *uml_strdup(char *string) return(new); } -void *get_init_task(void) -{ - return(&init_thread_union.thread_info.task); -} - int copy_to_user_proc(void __user *to, void *from, int size) { return(copy_to_user(to, from, size)); @@ -480,15 +456,3 @@ unsigned long arch_align_stack(unsigned long sp) return sp & ~0xf; } #endif - - -/* - * Overrides for Emacs so that we follow Linus's tabbing style. - * Emacs will notice this stuff at the end of the file and automatically - * adjust the settings for this buffer only. This must remain at the end - * of the file. - * --------------------------------------------------------------------------- - * Local variables: - * c-file-style: "linux" - * End: - */ diff --git a/arch/um/kernel/ptrace.c b/arch/um/kernel/ptrace.c index 2925e15324d..71af4d50389 100644 --- a/arch/um/kernel/ptrace.c +++ b/arch/um/kernel/ptrace.c @@ -322,11 +322,9 @@ void syscall_trace(union uml_pt_regs *regs, int entryexit) UPT_SYSCALL_ARG2(regs), UPT_SYSCALL_ARG3(regs), UPT_SYSCALL_ARG4(regs)); - else { - int res = UPT_SYSCALL_RET(regs); - audit_syscall_exit(current, AUDITSC_RESULT(res), - res); - } + else audit_syscall_exit(current, + AUDITSC_RESULT(UPT_SYSCALL_RET(regs)), + UPT_SYSCALL_RET(regs)); } /* Fake a debug trap */ @@ -356,14 +354,3 @@ void syscall_trace(union uml_pt_regs *regs, int entryexit) current->exit_code = 0; } } - -/* - * Overrides for Emacs so that we follow Linus's tabbing style. - * Emacs will notice this stuff at the end of the file and automatically - * adjust the settings for this buffer only. This must remain at the end - * of the file. - * --------------------------------------------------------------------------- - * Local variables: - * c-file-style: "linux" - * End: - */ diff --git a/arch/um/kernel/sysrq.c b/arch/um/kernel/sysrq.c index e630438f9e7..f80850091e7 100644 --- a/arch/um/kernel/sysrq.c +++ b/arch/um/kernel/sysrq.c @@ -3,6 +3,7 @@ * Licensed under the GPL */ +#include "linux/config.h" #include "linux/sched.h" #include "linux/kernel.h" #include "linux/module.h" @@ -12,14 +13,14 @@ #include "sysrq.h" #include "user_util.h" -void show_trace(unsigned long * stack) +/* Catch non-i386 SUBARCH's. */ +#if !defined(CONFIG_UML_X86) || defined(CONFIG_64BIT) +void show_trace(struct task_struct *task, unsigned long * stack) { - /* XXX: Copy the CONFIG_FRAME_POINTER stack-walking backtrace from - * arch/i386/kernel/traps.c, and then move this to sys-i386/sysrq.c.*/ unsigned long addr; if (!stack) { - stack = (unsigned long*) &stack; + stack = (unsigned long*) &stack; WARN_ON(1); } @@ -35,6 +36,7 @@ void show_trace(unsigned long * stack) } printk("\n"); } +#endif /* * stack dumps generator - this is used by arch-independent code. @@ -44,7 +46,7 @@ void dump_stack(void) { unsigned long stack; - show_trace(&stack); + show_trace(current, &stack); } EXPORT_SYMBOL(dump_stack); @@ -59,7 +61,11 @@ void show_stack(struct task_struct *task, unsigned long *esp) int i; if (esp == NULL) { - if (task != current) { + if (task != current && task != NULL) { + /* XXX: Isn't this bogus? I.e. isn't this the + * *userspace* stack of this task? If not so, use this + * even when task == current (as in i386). + */ esp = (unsigned long *) KSTK_ESP(task); /* Which one? No actual difference - just coding style.*/ //esp = (unsigned long *) PT_REGS_IP(&task->thread.regs); @@ -77,5 +83,6 @@ void show_stack(struct task_struct *task, unsigned long *esp) printk("%08lx ", *stack++); } - show_trace(esp); + printk("Call Trace: \n"); + show_trace(current, esp); } diff --git a/arch/um/kernel/trap_kern.c b/arch/um/kernel/trap_kern.c index 1de22d8a313..c20aef12059 100644 --- a/arch/um/kernel/trap_kern.c +++ b/arch/um/kernel/trap_kern.c @@ -23,7 +23,6 @@ #include "kern.h" #include "chan_kern.h" #include "mconsole_kern.h" -#include "2_5compat.h" #include "mem.h" #include "mem_kern.h" diff --git a/arch/um/kernel/tt/process_kern.c b/arch/um/kernel/tt/process_kern.c index df810ca8fc1..776310fd5b8 100644 --- a/arch/um/kernel/tt/process_kern.c +++ b/arch/um/kernel/tt/process_kern.c @@ -32,10 +32,6 @@ void *switch_to_tt(void *prev, void *next, void *last) unsigned long flags; int err, vtalrm, alrm, prof, cpu; char c; - /* jailing and SMP are incompatible, so this doesn't need to be - * made per-cpu - */ - static int reading; from = prev; to = next; @@ -59,13 +55,11 @@ void *switch_to_tt(void *prev, void *next, void *last) c = 0; set_current(to); - reading = 0; err = os_write_file(to->thread.mode.tt.switch_pipe[1], &c, sizeof(c)); if(err != sizeof(c)) panic("write of switch_pipe failed, err = %d", -err); - reading = 1; - if(from->thread.mode.tt.switch_pipe[0] == -1) + if(from->thread.mode.tt.switch_pipe[0] == -1) os_kill_process(os_getpid(), 0); err = os_read_file(from->thread.mode.tt.switch_pipe[0], &c, sizeof(c)); diff --git a/arch/um/kernel/um_arch.c b/arch/um/kernel/um_arch.c index 4d10ec372a6..418427107b2 100644 --- a/arch/um/kernel/um_arch.c +++ b/arch/um/kernel/um_arch.c @@ -111,12 +111,6 @@ struct seq_operations cpuinfo_op = { .show = show_cpuinfo, }; -pte_t * __bad_pagetable(void) -{ - panic("Someone should implement __bad_pagetable"); - return(NULL); -} - /* Set in linux_main */ unsigned long host_task_size; unsigned long task_size; diff --git a/arch/um/sys-i386/sysrq.c b/arch/um/sys-i386/sysrq.c index 281fc7b8ca0..e3706d15c4f 100644 --- a/arch/um/sys-i386/sysrq.c +++ b/arch/um/sys-i386/sysrq.c @@ -3,12 +3,15 @@ * Licensed under the GPL */ +#include "linux/config.h" #include "linux/kernel.h" #include "linux/smp.h" #include "linux/sched.h" +#include "linux/kallsyms.h" #include "asm/ptrace.h" #include "sysrq.h" +/* This is declared by <linux/sched.h> */ void show_regs(struct pt_regs *regs) { printk("\n"); @@ -31,5 +34,80 @@ void show_regs(struct pt_regs *regs) 0xffff & PT_REGS_DS(regs), 0xffff & PT_REGS_ES(regs)); - show_trace((unsigned long *) ®s); + show_trace(NULL, (unsigned long *) ®s); } + +/* Copied from i386. */ +static inline int valid_stack_ptr(struct thread_info *tinfo, void *p) +{ + return p > (void *)tinfo && + p < (void *)tinfo + THREAD_SIZE - 3; +} + +/* Adapted from i386 (we also print the address we read from). */ +static inline unsigned long print_context_stack(struct thread_info *tinfo, + unsigned long *stack, unsigned long ebp) +{ + unsigned long addr; + +#ifdef CONFIG_FRAME_POINTER + while (valid_stack_ptr(tinfo, (void *)ebp)) { + addr = *(unsigned long *)(ebp + 4); + printk("%08lx: [<%08lx>]", ebp + 4, addr); + print_symbol(" %s", addr); + printk("\n"); + ebp = *(unsigned long *)ebp; + } +#else + while (valid_stack_ptr(tinfo, stack)) { + addr = *stack; + if (__kernel_text_address(addr)) { + printk("%08lx: [<%08lx>]", (unsigned long) stack, addr); + print_symbol(" %s", addr); + printk("\n"); + } + stack++; + } +#endif + return ebp; +} + +void show_trace(struct task_struct* task, unsigned long * stack) +{ + unsigned long ebp; + struct thread_info *context; + + /* Turn this into BUG_ON if possible. */ + if (!stack) { + stack = (unsigned long*) &stack; + printk("show_trace: got NULL stack, implicit assumption task == current"); + WARN_ON(1); + } + + if (!task) + task = current; + + if (task != current) { + //ebp = (unsigned long) KSTK_EBP(task); + /* Which one? No actual difference - just coding style.*/ + ebp = (unsigned long) PT_REGS_EBP(&task->thread.regs); + } else { + asm ("movl %%ebp, %0" : "=r" (ebp) : ); + } + + context = (struct thread_info *) + ((unsigned long)stack & (~(THREAD_SIZE - 1))); + print_context_stack(context, stack, ebp); + + /*while (((long) stack & (THREAD_SIZE-1)) != 0) { + addr = *stack; + if (__kernel_text_address(addr)) { + printk("%08lx: [<%08lx>]", (unsigned long) stack, addr); + print_symbol(" %s", addr); + printk("\n"); + } + stack++; + }*/ + printk("\n"); +} + diff --git a/arch/um/sys-ppc/sysrq.c b/arch/um/sys-ppc/sysrq.c index 82d6e9335bb..2f816f1a0ff 100644 --- a/arch/um/sys-ppc/sysrq.c +++ b/arch/um/sys-ppc/sysrq.c @@ -27,17 +27,5 @@ void show_regs(struct pt_regs_subarch *regs) 0xffff & regs->xds, 0xffff & regs->xes); #endif - show_trace(®s->gpr[1]); + show_trace(current, ®s->gpr[1]); } - - -/* - * Overrides for Emacs so that we follow Linus's tabbing style. - * Emacs will notice this stuff at the end of the file and automatically - * adjust the settings for this buffer only. This must remain at the end - * of the file. - * --------------------------------------------------------------------------- - * Local variables: - * c-file-style: "linux" - * End: - */ diff --git a/arch/um/sys-x86_64/syscalls.c b/arch/um/sys-x86_64/syscalls.c index d4a59657fb9..6f44f40204e 100644 --- a/arch/um/sys-x86_64/syscalls.c +++ b/arch/um/sys-x86_64/syscalls.c @@ -133,23 +133,27 @@ static long arch_prctl_tt(int code, unsigned long addr) #ifdef CONFIG_MODE_SKAS +/* XXX: Must also call arch_prctl in the host, beside saving the segment bases! */ static long arch_prctl_skas(int code, unsigned long addr) { long ret = 0; switch(code){ - case ARCH_SET_GS: - current->thread.regs.regs.skas.regs[GS_BASE / sizeof(unsigned long)] = addr; - break; case ARCH_SET_FS: current->thread.regs.regs.skas.regs[FS_BASE / sizeof(unsigned long)] = addr; break; + case ARCH_SET_GS: + current->thread.regs.regs.skas.regs[GS_BASE / sizeof(unsigned long)] = addr; + break; case ARCH_GET_FS: - ret = put_user(current->thread.regs.regs.skas.regs[GS / sizeof(unsigned long)], &addr); + ret = put_user(current->thread.regs.regs.skas. + regs[FS_BASE / sizeof(unsigned long)], + (unsigned long __user *)addr); break; case ARCH_GET_GS: - ret = put_user(current->thread.regs.regs.skas.regs[FS / sizeof(unsigned \ -long)], &addr); + ret = put_user(current->thread.regs.regs.skas. + regs[GS_BASE / sizeof(unsigned long)], + (unsigned long __user *)addr); break; default: ret = -EINVAL; diff --git a/arch/um/sys-x86_64/sysrq.c b/arch/um/sys-x86_64/sysrq.c index ddf74691a61..d0a25af19a5 100644 --- a/arch/um/sys-x86_64/sysrq.c +++ b/arch/um/sys-x86_64/sysrq.c @@ -36,14 +36,5 @@ void __show_regs(struct pt_regs * regs) void show_regs(struct pt_regs *regs) { __show_regs(regs); - show_trace((unsigned long *) ®s); + show_trace(current, (unsigned long *) ®s); } - -/* Emacs will notice this stuff at the end of the file and automatically - * adjust the settings for this buffer only. This must remain at the end - * of the file. - * --------------------------------------------------------------------------- - * Local variables: - * c-file-style: "linux" - * End: - */ diff --git a/arch/x86_64/Kconfig b/arch/x86_64/Kconfig index 0f430d9d363..289f448ac89 100644 --- a/arch/x86_64/Kconfig +++ b/arch/x86_64/Kconfig @@ -305,6 +305,7 @@ config HPET_TIMER config X86_PM_TIMER bool "PM timer" + depends on ACPI default y help Support the ACPI PM timer for time keeping. This is slow, diff --git a/arch/x86_64/kernel/io_apic.c b/arch/x86_64/kernel/io_apic.c index 80e9b498c44..afd87e64d0a 100644 --- a/arch/x86_64/kernel/io_apic.c +++ b/arch/x86_64/kernel/io_apic.c @@ -37,6 +37,7 @@ #include <asm/desc.h> #include <asm/proto.h> #include <asm/mach_apic.h> +#include <asm/acpi.h> #define __apicdebuginit __init diff --git a/arch/x86_64/kernel/mpparse.c b/arch/x86_64/kernel/mpparse.c index f86d9db94bf..61a63be6b29 100644 --- a/arch/x86_64/kernel/mpparse.c +++ b/arch/x86_64/kernel/mpparse.c @@ -30,6 +30,7 @@ #include <asm/pgalloc.h> #include <asm/io_apic.h> #include <asm/proto.h> +#include <asm/acpi.h> /* Have we found an MP table */ int smp_found_config; diff --git a/arch/x86_64/kernel/signal.c b/arch/x86_64/kernel/signal.c index 3fdcdba0fec..429c0269dc4 100644 --- a/arch/x86_64/kernel/signal.c +++ b/arch/x86_64/kernel/signal.c @@ -28,6 +28,7 @@ #include <asm/uaccess.h> #include <asm/i387.h> #include <asm/proto.h> +#include <asm/ia32_unistd.h> /* #define DEBUG_SIG 1 */ diff --git a/arch/x86_64/kernel/time.c b/arch/x86_64/kernel/time.c index 735b6767c8e..fb8c809b4cd 100644 --- a/arch/x86_64/kernel/time.c +++ b/arch/x86_64/kernel/time.c @@ -27,7 +27,9 @@ #include <linux/bcd.h> #include <linux/kallsyms.h> #include <linux/acpi.h> +#ifdef CONFIG_ACPI #include <acpi/achware.h> /* for PM timer frequency */ +#endif #include <asm/8253pit.h> #include <asm/pgtable.h> #include <asm/vsyscall.h> diff --git a/drivers/cdrom/viocd.c b/drivers/cdrom/viocd.c index fcca26c89bb..38dd9ffbe8b 100644 --- a/drivers/cdrom/viocd.c +++ b/drivers/cdrom/viocd.c @@ -488,6 +488,20 @@ static int viocd_packet(struct cdrom_device_info *cdi, & (CDC_DVD_RAM | CDC_RAM)) != 0; } break; + case GPCMD_GET_CONFIGURATION: + if (cgc->cmd[3] == CDF_RWRT) { + struct rwrt_feature_desc *rfd = (struct rwrt_feature_desc *)(cgc->buffer + sizeof(struct feature_header)); + + if ((buflen >= + (sizeof(struct feature_header) + sizeof(*rfd))) && + (cdi->ops->capability & ~cdi->mask + & (CDC_DVD_RAM | CDC_RAM))) { + rfd->feature_code = cpu_to_be16(CDF_RWRT); + rfd->curr = 1; + ret = 0; + } + } + break; default: if (cgc->sense) { /* indicate Unknown code */ diff --git a/drivers/cpufreq/Kconfig b/drivers/cpufreq/Kconfig index 95882bb1950..60c9be99c6d 100644 --- a/drivers/cpufreq/Kconfig +++ b/drivers/cpufreq/Kconfig @@ -46,6 +46,10 @@ config CPU_FREQ_STAT_DETAILS This will show detail CPU frequency translation table in sysfs file system +# Note that it is not currently possible to set the other governors (such as ondemand) +# as the default, since if they fail to initialise, cpufreq will be +# left in an undefined state. + choice prompt "Default CPUFreq governor" default CPU_FREQ_DEFAULT_GOV_USERSPACE if CPU_FREQ_SA1100 || CPU_FREQ_SA1110 @@ -115,4 +119,24 @@ config CPU_FREQ_GOV_ONDEMAND If in doubt, say N. +config CPU_FREQ_GOV_CONSERVATIVE + tristate "'conservative' cpufreq governor" + depends on CPU_FREQ + help + 'conservative' - this driver is rather similar to the 'ondemand' + governor both in its source code and its purpose, the difference is + its optimisation for better suitability in a battery powered + environment. The frequency is gracefully increased and decreased + rather than jumping to 100% when speed is required. + + If you have a desktop machine then you should really be considering + the 'ondemand' governor instead, however if you are using a laptop, + PDA or even an AMD64 based computer (due to the unacceptable + step-by-step latency issues between the minimum and maximum frequency + transitions in the CPU) you will probably want to use this governor. + + For details, take a look at linux/Documentation/cpu-freq. + + If in doubt, say N. + endif # CPU_FREQ diff --git a/drivers/cpufreq/Makefile b/drivers/cpufreq/Makefile index 67b16e5a41a..71fc3b4173f 100644 --- a/drivers/cpufreq/Makefile +++ b/drivers/cpufreq/Makefile @@ -8,6 +8,7 @@ obj-$(CONFIG_CPU_FREQ_GOV_PERFORMANCE) += cpufreq_performance.o obj-$(CONFIG_CPU_FREQ_GOV_POWERSAVE) += cpufreq_powersave.o obj-$(CONFIG_CPU_FREQ_GOV_USERSPACE) += cpufreq_userspace.o obj-$(CONFIG_CPU_FREQ_GOV_ONDEMAND) += cpufreq_ondemand.o +obj-$(CONFIG_CPU_FREQ_GOV_CONSERVATIVE) += cpufreq_conservative.o # CPUfreq cross-arch helpers obj-$(CONFIG_CPU_FREQ_TABLE) += freq_table.o diff --git a/drivers/cpufreq/cpufreq.c b/drivers/cpufreq/cpufreq.c index 8e561313d09..03b5fb2ddcf 100644 --- a/drivers/cpufreq/cpufreq.c +++ b/drivers/cpufreq/cpufreq.c @@ -258,7 +258,7 @@ void cpufreq_notify_transition(struct cpufreq_freqs *freqs, unsigned int state) (likely(cpufreq_cpu_data[freqs->cpu]->cur)) && (unlikely(freqs->old != cpufreq_cpu_data[freqs->cpu]->cur))) { - printk(KERN_WARNING "Warning: CPU frequency is %u, " + dprintk(KERN_WARNING "Warning: CPU frequency is %u, " "cpufreq assumed %u kHz.\n", freqs->old, cpufreq_cpu_data[freqs->cpu]->cur); freqs->old = cpufreq_cpu_data[freqs->cpu]->cur; } @@ -814,7 +814,7 @@ static void cpufreq_out_of_sync(unsigned int cpu, unsigned int old_freq, unsigne { struct cpufreq_freqs freqs; - printk(KERN_WARNING "Warning: CPU frequency out of sync: cpufreq and timing " + dprintk(KERN_WARNING "Warning: CPU frequency out of sync: cpufreq and timing " "core thinks of %u, is %u kHz.\n", old_freq, new_freq); freqs.cpu = cpu; @@ -923,7 +923,7 @@ static int cpufreq_suspend(struct sys_device * sysdev, u32 state) struct cpufreq_freqs freqs; if (!(cpufreq_driver->flags & CPUFREQ_PM_NO_WARN)) - printk(KERN_DEBUG "Warning: CPU frequency is %u, " + dprintk(KERN_DEBUG "Warning: CPU frequency is %u, " "cpufreq assumed %u kHz.\n", cur_freq, cpu_policy->cur); @@ -1004,7 +1004,7 @@ static int cpufreq_resume(struct sys_device * sysdev) struct cpufreq_freqs freqs; if (!(cpufreq_driver->flags & CPUFREQ_PM_NO_WARN)) - printk(KERN_WARNING "Warning: CPU frequency" + dprintk(KERN_WARNING "Warning: CPU frequency" "is %u, cpufreq assumed %u kHz.\n", cur_freq, cpu_policy->cur); diff --git a/drivers/cpufreq/cpufreq_conservative.c b/drivers/cpufreq/cpufreq_conservative.c new file mode 100644 index 00000000000..e1df376e709 --- /dev/null +++ b/drivers/cpufreq/cpufreq_conservative.c @@ -0,0 +1,586 @@ +/* + * drivers/cpufreq/cpufreq_conservative.c + * + * Copyright (C) 2001 Russell King + * (C) 2003 Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>. + * Jun Nakajima <jun.nakajima@intel.com> + * (C) 2004 Alexander Clouter <alex-kernel@digriz.org.uk> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/smp.h> +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/ctype.h> +#include <linux/cpufreq.h> +#include <linux/sysctl.h> +#include <linux/types.h> +#include <linux/fs.h> +#include <linux/sysfs.h> +#include <linux/sched.h> +#include <linux/kmod.h> +#include <linux/workqueue.h> +#include <linux/jiffies.h> +#include <linux/kernel_stat.h> +#include <linux/percpu.h> + +/* + * dbs is used in this file as a shortform for demandbased switching + * It helps to keep variable names smaller, simpler + */ + +#define DEF_FREQUENCY_UP_THRESHOLD (80) +#define MIN_FREQUENCY_UP_THRESHOLD (0) +#define MAX_FREQUENCY_UP_THRESHOLD (100) + +#define DEF_FREQUENCY_DOWN_THRESHOLD (20) +#define MIN_FREQUENCY_DOWN_THRESHOLD (0) +#define MAX_FREQUENCY_DOWN_THRESHOLD (100) + +/* + * The polling frequency of this governor depends on the capability of + * the processor. Default polling frequency is 1000 times the transition + * latency of the processor. The governor will work on any processor with + * transition latency <= 10mS, using appropriate sampling + * rate. + * For CPUs with transition latency > 10mS (mostly drivers with CPUFREQ_ETERNAL) + * this governor will not work. + * All times here are in uS. + */ +static unsigned int def_sampling_rate; +#define MIN_SAMPLING_RATE (def_sampling_rate / 2) +#define MAX_SAMPLING_RATE (500 * def_sampling_rate) +#define DEF_SAMPLING_RATE_LATENCY_MULTIPLIER (100000) +#define DEF_SAMPLING_DOWN_FACTOR (5) +#define TRANSITION_LATENCY_LIMIT (10 * 1000) + +static void do_dbs_timer(void *data); + +struct cpu_dbs_info_s { + struct cpufreq_policy *cur_policy; + unsigned int prev_cpu_idle_up; + unsigned int prev_cpu_idle_down; + unsigned int enable; +}; +static DEFINE_PER_CPU(struct cpu_dbs_info_s, cpu_dbs_info); + +static unsigned int dbs_enable; /* number of CPUs using this policy */ + +static DECLARE_MUTEX (dbs_sem); +static DECLARE_WORK (dbs_work, do_dbs_timer, NULL); + +struct dbs_tuners { + unsigned int sampling_rate; + unsigned int sampling_down_factor; + unsigned int up_threshold; + unsigned int down_threshold; + unsigned int ignore_nice; + unsigned int freq_step; +}; + +static struct dbs_tuners dbs_tuners_ins = { + .up_threshold = DEF_FREQUENCY_UP_THRESHOLD, + .down_threshold = DEF_FREQUENCY_DOWN_THRESHOLD, + .sampling_down_factor = DEF_SAMPLING_DOWN_FACTOR, +}; + +static inline unsigned int get_cpu_idle_time(unsigned int cpu) +{ + return kstat_cpu(cpu).cpustat.idle + + kstat_cpu(cpu).cpustat.iowait + + ( !dbs_tuners_ins.ignore_nice ? + kstat_cpu(cpu).cpustat.nice : + 0); +} + +/************************** sysfs interface ************************/ +static ssize_t show_sampling_rate_max(struct cpufreq_policy *policy, char *buf) +{ + return sprintf (buf, "%u\n", MAX_SAMPLING_RATE); +} + +static ssize_t show_sampling_rate_min(struct cpufreq_policy *policy, char *buf) +{ + return sprintf (buf, "%u\n", MIN_SAMPLING_RATE); +} + +#define define_one_ro(_name) \ +static struct freq_attr _name = \ +__ATTR(_name, 0444, show_##_name, NULL) + +define_one_ro(sampling_rate_max); +define_one_ro(sampling_rate_min); + +/* cpufreq_conservative Governor Tunables */ +#define show_one(file_name, object) \ +static ssize_t show_##file_name \ +(struct cpufreq_policy *unused, char *buf) \ +{ \ + return sprintf(buf, "%u\n", dbs_tuners_ins.object); \ +} +show_one(sampling_rate, sampling_rate); +show_one(sampling_down_factor, sampling_down_factor); +show_one(up_threshold, up_threshold); +show_one(down_threshold, down_threshold); +show_one(ignore_nice, ignore_nice); +show_one(freq_step, freq_step); + +static ssize_t store_sampling_down_factor(struct cpufreq_policy *unused, + const char *buf, size_t count) +{ + unsigned int input; + int ret; + ret = sscanf (buf, "%u", &input); + if (ret != 1 ) + return -EINVAL; + + down(&dbs_sem); + dbs_tuners_ins.sampling_down_factor = input; + up(&dbs_sem); + + return count; +} + +static ssize_t store_sampling_rate(struct cpufreq_policy *unused, + const char *buf, size_t count) +{ + unsigned int input; + int ret; + ret = sscanf (buf, "%u", &input); + + down(&dbs_sem); + if (ret != 1 || input > MAX_SAMPLING_RATE || input < MIN_SAMPLING_RATE) { + up(&dbs_sem); + return -EINVAL; + } + + dbs_tuners_ins.sampling_rate = input; + up(&dbs_sem); + + return count; +} + +static ssize_t store_up_threshold(struct cpufreq_policy *unused, + const char *buf, size_t count) +{ + unsigned int input; + int ret; + ret = sscanf (buf, "%u", &input); + + down(&dbs_sem); + if (ret != 1 || input > MAX_FREQUENCY_UP_THRESHOLD || + input < MIN_FREQUENCY_UP_THRESHOLD || + input <= dbs_tuners_ins.down_threshold) { + up(&dbs_sem); + return -EINVAL; + } + + dbs_tuners_ins.up_threshold = input; + up(&dbs_sem); + + return count; +} + +static ssize_t store_down_threshold(struct cpufreq_policy *unused, + const char *buf, size_t count) +{ + unsigned int input; + int ret; + ret = sscanf (buf, "%u", &input); + + down(&dbs_sem); + if (ret != 1 || input > MAX_FREQUENCY_DOWN_THRESHOLD || + input < MIN_FREQUENCY_DOWN_THRESHOLD || + input >= dbs_tuners_ins.up_threshold) { + up(&dbs_sem); + return -EINVAL; + } + + dbs_tuners_ins.down_threshold = input; + up(&dbs_sem); + + return count; +} + +static ssize_t store_ignore_nice(struct cpufreq_policy *policy, + const char *buf, size_t count) +{ + unsigned int input; + int ret; + + unsigned int j; + + ret = sscanf (buf, "%u", &input); + if ( ret != 1 ) + return -EINVAL; + + if ( input > 1 ) + input = 1; + + down(&dbs_sem); + if ( input == dbs_tuners_ins.ignore_nice ) { /* nothing to do */ + up(&dbs_sem); + return count; + } + dbs_tuners_ins.ignore_nice = input; + + /* we need to re-evaluate prev_cpu_idle_up and prev_cpu_idle_down */ + for_each_online_cpu(j) { + struct cpu_dbs_info_s *j_dbs_info; + j_dbs_info = &per_cpu(cpu_dbs_info, j); + j_dbs_info->prev_cpu_idle_up = get_cpu_idle_time(j); + j_dbs_info->prev_cpu_idle_down = j_dbs_info->prev_cpu_idle_up; + } + up(&dbs_sem); + + return count; +} + +static ssize_t store_freq_step(struct cpufreq_policy *policy, + const char *buf, size_t count) +{ + unsigned int input; + int ret; + + ret = sscanf (buf, "%u", &input); + + if ( ret != 1 ) + return -EINVAL; + + if ( input > 100 ) + input = 100; + + /* no need to test here if freq_step is zero as the user might actually + * want this, they would be crazy though :) */ + down(&dbs_sem); + dbs_tuners_ins.freq_step = input; + up(&dbs_sem); + + return count; +} + +#define define_one_rw(_name) \ +static struct freq_attr _name = \ +__ATTR(_name, 0644, show_##_name, store_##_name) + +define_one_rw(sampling_rate); +define_one_rw(sampling_down_factor); +define_one_rw(up_threshold); +define_one_rw(down_threshold); +define_one_rw(ignore_nice); +define_one_rw(freq_step); + +static struct attribute * dbs_attributes[] = { + &sampling_rate_max.attr, + &sampling_rate_min.attr, + &sampling_rate.attr, + &sampling_down_factor.attr, + &up_threshold.attr, + &down_threshold.attr, + &ignore_nice.attr, + &freq_step.attr, + NULL +}; + +static struct attribute_group dbs_attr_group = { + .attrs = dbs_attributes, + .name = "conservative", +}; + +/************************** sysfs end ************************/ + +static void dbs_check_cpu(int cpu) +{ + unsigned int idle_ticks, up_idle_ticks, down_idle_ticks; + unsigned int freq_step; + unsigned int freq_down_sampling_rate; + static int down_skip[NR_CPUS]; + static int requested_freq[NR_CPUS]; + static unsigned short init_flag = 0; + struct cpu_dbs_info_s *this_dbs_info; + struct cpu_dbs_info_s *dbs_info; + + struct cpufreq_policy *policy; + unsigned int j; + + this_dbs_info = &per_cpu(cpu_dbs_info, cpu); + if (!this_dbs_info->enable) + return; + + policy = this_dbs_info->cur_policy; + + if ( init_flag == 0 ) { + for ( /* NULL */; init_flag < NR_CPUS; init_flag++ ) { + dbs_info = &per_cpu(cpu_dbs_info, init_flag); + requested_freq[cpu] = dbs_info->cur_policy->cur; + } + init_flag = 1; + } + + /* + * The default safe range is 20% to 80% + * Every sampling_rate, we check + * - If current idle time is less than 20%, then we try to + * increase frequency + * Every sampling_rate*sampling_down_factor, we check + * - If current idle time is more than 80%, then we try to + * decrease frequency + * + * Any frequency increase takes it to the maximum frequency. + * Frequency reduction happens at minimum steps of + * 5% (default) of max_frequency + */ + + /* Check for frequency increase */ + + idle_ticks = UINT_MAX; + for_each_cpu_mask(j, policy->cpus) { + unsigned int tmp_idle_ticks, total_idle_ticks; + struct cpu_dbs_info_s *j_dbs_info; + + j_dbs_info = &per_cpu(cpu_dbs_info, j); + /* Check for frequency increase */ + total_idle_ticks = get_cpu_idle_time(j); + tmp_idle_ticks = total_idle_ticks - + j_dbs_info->prev_cpu_idle_up; + j_dbs_info->prev_cpu_idle_up = total_idle_ticks; + + if (tmp_idle_ticks < idle_ticks) + idle_ticks = tmp_idle_ticks; + } + + /* Scale idle ticks by 100 and compare with up and down ticks */ + idle_ticks *= 100; + up_idle_ticks = (100 - dbs_tuners_ins.up_threshold) * + usecs_to_jiffies(dbs_tuners_ins.sampling_rate); + + if (idle_ticks < up_idle_ticks) { + down_skip[cpu] = 0; + for_each_cpu_mask(j, policy->cpus) { + struct cpu_dbs_info_s *j_dbs_info; + + j_dbs_info = &per_cpu(cpu_dbs_info, j); + j_dbs_info->prev_cpu_idle_down = + j_dbs_info->prev_cpu_idle_up; + } + /* if we are already at full speed then break out early */ + if (requested_freq[cpu] == policy->max) + return; + + freq_step = (dbs_tuners_ins.freq_step * policy->max) / 100; + + /* max freq cannot be less than 100. But who knows.... */ + if (unlikely(freq_step == 0)) + freq_step = 5; + + requested_freq[cpu] += freq_step; + if (requested_freq[cpu] > policy->max) + requested_freq[cpu] = policy->max; + + __cpufreq_driver_target(policy, requested_freq[cpu], + CPUFREQ_RELATION_H); + return; + } + + /* Check for frequency decrease */ + down_skip[cpu]++; + if (down_skip[cpu] < dbs_tuners_ins.sampling_down_factor) + return; + + idle_ticks = UINT_MAX; + for_each_cpu_mask(j, policy->cpus) { + unsigned int tmp_idle_ticks, total_idle_ticks; + struct cpu_dbs_info_s *j_dbs_info; + + j_dbs_info = &per_cpu(cpu_dbs_info, j); + total_idle_ticks = j_dbs_info->prev_cpu_idle_up; + tmp_idle_ticks = total_idle_ticks - + j_dbs_info->prev_cpu_idle_down; + j_dbs_info->prev_cpu_idle_down = total_idle_ticks; + + if (tmp_idle_ticks < idle_ticks) + idle_ticks = tmp_idle_ticks; + } + + /* Scale idle ticks by 100 and compare with up and down ticks */ + idle_ticks *= 100; + down_skip[cpu] = 0; + + freq_down_sampling_rate = dbs_tuners_ins.sampling_rate * + dbs_tuners_ins.sampling_down_factor; + down_idle_ticks = (100 - dbs_tuners_ins.down_threshold) * + usecs_to_jiffies(freq_down_sampling_rate); + + if (idle_ticks > down_idle_ticks) { + /* if we are already at the lowest speed then break out early + * or if we 'cannot' reduce the speed as the user might want + * freq_step to be zero */ + if (requested_freq[cpu] == policy->min + || dbs_tuners_ins.freq_step == 0) + return; + + freq_step = (dbs_tuners_ins.freq_step * policy->max) / 100; + + /* max freq cannot be less than 100. But who knows.... */ + if (unlikely(freq_step == 0)) + freq_step = 5; + + requested_freq[cpu] -= freq_step; + if (requested_freq[cpu] < policy->min) + requested_freq[cpu] = policy->min; + + __cpufreq_driver_target(policy, + requested_freq[cpu], + CPUFREQ_RELATION_H); + return; + } +} + +static void do_dbs_timer(void *data) +{ + int i; + down(&dbs_sem); + for_each_online_cpu(i) + dbs_check_cpu(i); + schedule_delayed_work(&dbs_work, + usecs_to_jiffies(dbs_tuners_ins.sampling_rate)); + up(&dbs_sem); +} + +static inline void dbs_timer_init(void) +{ + INIT_WORK(&dbs_work, do_dbs_timer, NULL); + schedule_delayed_work(&dbs_work, + usecs_to_jiffies(dbs_tuners_ins.sampling_rate)); + return; +} + +static inline void dbs_timer_exit(void) +{ + cancel_delayed_work(&dbs_work); + return; +} + +static int cpufreq_governor_dbs(struct cpufreq_policy *policy, + unsigned int event) +{ + unsigned int cpu = policy->cpu; + struct cpu_dbs_info_s *this_dbs_info; + unsigned int j; + + this_dbs_info = &per_cpu(cpu_dbs_info, cpu); + + switch (event) { + case CPUFREQ_GOV_START: + if ((!cpu_online(cpu)) || + (!policy->cur)) + return -EINVAL; + + if (policy->cpuinfo.transition_latency > + (TRANSITION_LATENCY_LIMIT * 1000)) + return -EINVAL; + if (this_dbs_info->enable) /* Already enabled */ + break; + + down(&dbs_sem); + for_each_cpu_mask(j, policy->cpus) { + struct cpu_dbs_info_s *j_dbs_info; + j_dbs_info = &per_cpu(cpu_dbs_info, j); + j_dbs_info->cur_policy = policy; + + j_dbs_info->prev_cpu_idle_up = get_cpu_idle_time(j); + j_dbs_info->prev_cpu_idle_down + = j_dbs_info->prev_cpu_idle_up; + } + this_dbs_info->enable = 1; + sysfs_create_group(&policy->kobj, &dbs_attr_group); + dbs_enable++; + /* + * Start the timerschedule work, when this governor + * is used for first time + */ + if (dbs_enable == 1) { + unsigned int latency; + /* policy latency is in nS. Convert it to uS first */ + + latency = policy->cpuinfo.transition_latency; + if (latency < 1000) + latency = 1000; + + def_sampling_rate = (latency / 1000) * + DEF_SAMPLING_RATE_LATENCY_MULTIPLIER; + dbs_tuners_ins.sampling_rate = def_sampling_rate; + dbs_tuners_ins.ignore_nice = 0; + dbs_tuners_ins.freq_step = 5; + + dbs_timer_init(); + } + + up(&dbs_sem); + break; + + case CPUFREQ_GOV_STOP: + down(&dbs_sem); + this_dbs_info->enable = 0; + sysfs_remove_group(&policy->kobj, &dbs_attr_group); + dbs_enable--; + /* + * Stop the timerschedule work, when this governor + * is used for first time + */ + if (dbs_enable == 0) + dbs_timer_exit(); + + up(&dbs_sem); + + break; + + case CPUFREQ_GOV_LIMITS: + down(&dbs_sem); + if (policy->max < this_dbs_info->cur_policy->cur) + __cpufreq_driver_target( + this_dbs_info->cur_policy, + policy->max, CPUFREQ_RELATION_H); + else if (policy->min > this_dbs_info->cur_policy->cur) + __cpufreq_driver_target( + this_dbs_info->cur_policy, + policy->min, CPUFREQ_RELATION_L); + up(&dbs_sem); + break; + } + return 0; +} + +static struct cpufreq_governor cpufreq_gov_dbs = { + .name = "conservative", + .governor = cpufreq_governor_dbs, + .owner = THIS_MODULE, +}; + +static int __init cpufreq_gov_dbs_init(void) +{ + return cpufreq_register_governor(&cpufreq_gov_dbs); +} + +static void __exit cpufreq_gov_dbs_exit(void) +{ + /* Make sure that the scheduled work is indeed not running */ + flush_scheduled_work(); + + cpufreq_unregister_governor(&cpufreq_gov_dbs); +} + + +MODULE_AUTHOR ("Alexander Clouter <alex-kernel@digriz.org.uk>"); +MODULE_DESCRIPTION ("'cpufreq_conservative' - A dynamic cpufreq governor for " + "Low Latency Frequency Transition capable processors " + "optimised for use in a battery environment"); +MODULE_LICENSE ("GPL"); + +module_init(cpufreq_gov_dbs_init); +module_exit(cpufreq_gov_dbs_exit); diff --git a/drivers/cpufreq/cpufreq_ondemand.c b/drivers/cpufreq/cpufreq_ondemand.c index 8d83a21c647..c1fc9c62bb5 100644 --- a/drivers/cpufreq/cpufreq_ondemand.c +++ b/drivers/cpufreq/cpufreq_ondemand.c @@ -34,13 +34,9 @@ */ #define DEF_FREQUENCY_UP_THRESHOLD (80) -#define MIN_FREQUENCY_UP_THRESHOLD (0) +#define MIN_FREQUENCY_UP_THRESHOLD (11) #define MAX_FREQUENCY_UP_THRESHOLD (100) -#define DEF_FREQUENCY_DOWN_THRESHOLD (20) -#define MIN_FREQUENCY_DOWN_THRESHOLD (0) -#define MAX_FREQUENCY_DOWN_THRESHOLD (100) - /* * The polling frequency of this governor depends on the capability of * the processor. Default polling frequency is 1000 times the transition @@ -55,9 +51,9 @@ static unsigned int def_sampling_rate; #define MIN_SAMPLING_RATE (def_sampling_rate / 2) #define MAX_SAMPLING_RATE (500 * def_sampling_rate) #define DEF_SAMPLING_RATE_LATENCY_MULTIPLIER (1000) -#define DEF_SAMPLING_DOWN_FACTOR (10) +#define DEF_SAMPLING_DOWN_FACTOR (1) +#define MAX_SAMPLING_DOWN_FACTOR (10) #define TRANSITION_LATENCY_LIMIT (10 * 1000) -#define sampling_rate_in_HZ(x) (((x * HZ) < (1000 * 1000))?1:((x * HZ) / (1000 * 1000))) static void do_dbs_timer(void *data); @@ -78,15 +74,23 @@ struct dbs_tuners { unsigned int sampling_rate; unsigned int sampling_down_factor; unsigned int up_threshold; - unsigned int down_threshold; + unsigned int ignore_nice; }; static struct dbs_tuners dbs_tuners_ins = { .up_threshold = DEF_FREQUENCY_UP_THRESHOLD, - .down_threshold = DEF_FREQUENCY_DOWN_THRESHOLD, .sampling_down_factor = DEF_SAMPLING_DOWN_FACTOR, }; +static inline unsigned int get_cpu_idle_time(unsigned int cpu) +{ + return kstat_cpu(cpu).cpustat.idle + + kstat_cpu(cpu).cpustat.iowait + + ( !dbs_tuners_ins.ignore_nice ? + kstat_cpu(cpu).cpustat.nice : + 0); +} + /************************** sysfs interface ************************/ static ssize_t show_sampling_rate_max(struct cpufreq_policy *policy, char *buf) { @@ -115,7 +119,7 @@ static ssize_t show_##file_name \ show_one(sampling_rate, sampling_rate); show_one(sampling_down_factor, sampling_down_factor); show_one(up_threshold, up_threshold); -show_one(down_threshold, down_threshold); +show_one(ignore_nice, ignore_nice); static ssize_t store_sampling_down_factor(struct cpufreq_policy *unused, const char *buf, size_t count) @@ -126,6 +130,9 @@ static ssize_t store_sampling_down_factor(struct cpufreq_policy *unused, if (ret != 1 ) return -EINVAL; + if (input > MAX_SAMPLING_DOWN_FACTOR || input < 1) + return -EINVAL; + down(&dbs_sem); dbs_tuners_ins.sampling_down_factor = input; up(&dbs_sem); @@ -161,8 +168,7 @@ static ssize_t store_up_threshold(struct cpufreq_policy *unused, down(&dbs_sem); if (ret != 1 || input > MAX_FREQUENCY_UP_THRESHOLD || - input < MIN_FREQUENCY_UP_THRESHOLD || - input <= dbs_tuners_ins.down_threshold) { + input < MIN_FREQUENCY_UP_THRESHOLD) { up(&dbs_sem); return -EINVAL; } @@ -173,22 +179,35 @@ static ssize_t store_up_threshold(struct cpufreq_policy *unused, return count; } -static ssize_t store_down_threshold(struct cpufreq_policy *unused, +static ssize_t store_ignore_nice(struct cpufreq_policy *policy, const char *buf, size_t count) { unsigned int input; int ret; + + unsigned int j; + ret = sscanf (buf, "%u", &input); + if ( ret != 1 ) + return -EINVAL; + if ( input > 1 ) + input = 1; + down(&dbs_sem); - if (ret != 1 || input > MAX_FREQUENCY_DOWN_THRESHOLD || - input < MIN_FREQUENCY_DOWN_THRESHOLD || - input >= dbs_tuners_ins.up_threshold) { + if ( input == dbs_tuners_ins.ignore_nice ) { /* nothing to do */ up(&dbs_sem); - return -EINVAL; + return count; } + dbs_tuners_ins.ignore_nice = input; - dbs_tuners_ins.down_threshold = input; + /* we need to re-evaluate prev_cpu_idle_up and prev_cpu_idle_down */ + for_each_online_cpu(j) { + struct cpu_dbs_info_s *j_dbs_info; + j_dbs_info = &per_cpu(cpu_dbs_info, j); + j_dbs_info->prev_cpu_idle_up = get_cpu_idle_time(j); + j_dbs_info->prev_cpu_idle_down = j_dbs_info->prev_cpu_idle_up; + } up(&dbs_sem); return count; @@ -201,7 +220,7 @@ __ATTR(_name, 0644, show_##_name, store_##_name) define_one_rw(sampling_rate); define_one_rw(sampling_down_factor); define_one_rw(up_threshold); -define_one_rw(down_threshold); +define_one_rw(ignore_nice); static struct attribute * dbs_attributes[] = { &sampling_rate_max.attr, @@ -209,7 +228,7 @@ static struct attribute * dbs_attributes[] = { &sampling_rate.attr, &sampling_down_factor.attr, &up_threshold.attr, - &down_threshold.attr, + &ignore_nice.attr, NULL }; @@ -222,9 +241,8 @@ static struct attribute_group dbs_attr_group = { static void dbs_check_cpu(int cpu) { - unsigned int idle_ticks, up_idle_ticks, down_idle_ticks; - unsigned int total_idle_ticks; - unsigned int freq_down_step; + unsigned int idle_ticks, up_idle_ticks, total_ticks; + unsigned int freq_next; unsigned int freq_down_sampling_rate; static int down_skip[NR_CPUS]; struct cpu_dbs_info_s *this_dbs_info; @@ -238,38 +256,25 @@ static void dbs_check_cpu(int cpu) policy = this_dbs_info->cur_policy; /* - * The default safe range is 20% to 80% - * Every sampling_rate, we check - * - If current idle time is less than 20%, then we try to - * increase frequency - * Every sampling_rate*sampling_down_factor, we check - * - If current idle time is more than 80%, then we try to - * decrease frequency + * Every sampling_rate, we check, if current idle time is less + * than 20% (default), then we try to increase frequency + * Every sampling_rate*sampling_down_factor, we look for a the lowest + * frequency which can sustain the load while keeping idle time over + * 30%. If such a frequency exist, we try to decrease to this frequency. * * Any frequency increase takes it to the maximum frequency. * Frequency reduction happens at minimum steps of - * 5% of max_frequency + * 5% (default) of current frequency */ /* Check for frequency increase */ - total_idle_ticks = kstat_cpu(cpu).cpustat.idle + - kstat_cpu(cpu).cpustat.iowait; - idle_ticks = total_idle_ticks - - this_dbs_info->prev_cpu_idle_up; - this_dbs_info->prev_cpu_idle_up = total_idle_ticks; - - + idle_ticks = UINT_MAX; for_each_cpu_mask(j, policy->cpus) { - unsigned int tmp_idle_ticks; + unsigned int tmp_idle_ticks, total_idle_ticks; struct cpu_dbs_info_s *j_dbs_info; - if (j == cpu) - continue; - j_dbs_info = &per_cpu(cpu_dbs_info, j); - /* Check for frequency increase */ - total_idle_ticks = kstat_cpu(j).cpustat.idle + - kstat_cpu(j).cpustat.iowait; + total_idle_ticks = get_cpu_idle_time(j); tmp_idle_ticks = total_idle_ticks - j_dbs_info->prev_cpu_idle_up; j_dbs_info->prev_cpu_idle_up = total_idle_ticks; @@ -281,13 +286,23 @@ static void dbs_check_cpu(int cpu) /* Scale idle ticks by 100 and compare with up and down ticks */ idle_ticks *= 100; up_idle_ticks = (100 - dbs_tuners_ins.up_threshold) * - sampling_rate_in_HZ(dbs_tuners_ins.sampling_rate); + usecs_to_jiffies(dbs_tuners_ins.sampling_rate); if (idle_ticks < up_idle_ticks) { + down_skip[cpu] = 0; + for_each_cpu_mask(j, policy->cpus) { + struct cpu_dbs_info_s *j_dbs_info; + + j_dbs_info = &per_cpu(cpu_dbs_info, j); + j_dbs_info->prev_cpu_idle_down = + j_dbs_info->prev_cpu_idle_up; + } + /* if we are already at full speed then break out early */ + if (policy->cur == policy->max) + return; + __cpufreq_driver_target(policy, policy->max, CPUFREQ_RELATION_H); - down_skip[cpu] = 0; - this_dbs_info->prev_cpu_idle_down = total_idle_ticks; return; } @@ -296,23 +311,14 @@ static void dbs_check_cpu(int cpu) if (down_skip[cpu] < dbs_tuners_ins.sampling_down_factor) return; - total_idle_ticks = kstat_cpu(cpu).cpustat.idle + - kstat_cpu(cpu).cpustat.iowait; - idle_ticks = total_idle_ticks - - this_dbs_info->prev_cpu_idle_down; - this_dbs_info->prev_cpu_idle_down = total_idle_ticks; - + idle_ticks = UINT_MAX; for_each_cpu_mask(j, policy->cpus) { - unsigned int tmp_idle_ticks; + unsigned int tmp_idle_ticks, total_idle_ticks; struct cpu_dbs_info_s *j_dbs_info; - if (j == cpu) - continue; - j_dbs_info = &per_cpu(cpu_dbs_info, j); - /* Check for frequency increase */ - total_idle_ticks = kstat_cpu(j).cpustat.idle + - kstat_cpu(j).cpustat.iowait; + /* Check for frequency decrease */ + total_idle_ticks = j_dbs_info->prev_cpu_idle_up; tmp_idle_ticks = total_idle_ticks - j_dbs_info->prev_cpu_idle_down; j_dbs_info->prev_cpu_idle_down = total_idle_ticks; @@ -321,38 +327,37 @@ static void dbs_check_cpu(int cpu) idle_ticks = tmp_idle_ticks; } - /* Scale idle ticks by 100 and compare with up and down ticks */ - idle_ticks *= 100; down_skip[cpu] = 0; + /* if we cannot reduce the frequency anymore, break out early */ + if (policy->cur == policy->min) + return; + /* Compute how many ticks there are between two measurements */ freq_down_sampling_rate = dbs_tuners_ins.sampling_rate * dbs_tuners_ins.sampling_down_factor; - down_idle_ticks = (100 - dbs_tuners_ins.down_threshold) * - sampling_rate_in_HZ(freq_down_sampling_rate); + total_ticks = usecs_to_jiffies(freq_down_sampling_rate); - if (idle_ticks > down_idle_ticks ) { - freq_down_step = (5 * policy->max) / 100; - - /* max freq cannot be less than 100. But who knows.... */ - if (unlikely(freq_down_step == 0)) - freq_down_step = 5; + /* + * The optimal frequency is the frequency that is the lowest that + * can support the current CPU usage without triggering the up + * policy. To be safe, we focus 10 points under the threshold. + */ + freq_next = ((total_ticks - idle_ticks) * 100) / total_ticks; + freq_next = (freq_next * policy->cur) / + (dbs_tuners_ins.up_threshold - 10); - __cpufreq_driver_target(policy, - policy->cur - freq_down_step, - CPUFREQ_RELATION_H); - return; - } + if (freq_next <= ((policy->cur * 95) / 100)) + __cpufreq_driver_target(policy, freq_next, CPUFREQ_RELATION_L); } static void do_dbs_timer(void *data) { int i; down(&dbs_sem); - for (i = 0; i < NR_CPUS; i++) - if (cpu_online(i)) - dbs_check_cpu(i); + for_each_online_cpu(i) + dbs_check_cpu(i); schedule_delayed_work(&dbs_work, - sampling_rate_in_HZ(dbs_tuners_ins.sampling_rate)); + usecs_to_jiffies(dbs_tuners_ins.sampling_rate)); up(&dbs_sem); } @@ -360,7 +365,7 @@ static inline void dbs_timer_init(void) { INIT_WORK(&dbs_work, do_dbs_timer, NULL); schedule_delayed_work(&dbs_work, - sampling_rate_in_HZ(dbs_tuners_ins.sampling_rate)); + usecs_to_jiffies(dbs_tuners_ins.sampling_rate)); return; } @@ -397,12 +402,9 @@ static int cpufreq_governor_dbs(struct cpufreq_policy *policy, j_dbs_info = &per_cpu(cpu_dbs_info, j); j_dbs_info->cur_policy = policy; - j_dbs_info->prev_cpu_idle_up = - kstat_cpu(j).cpustat.idle + - kstat_cpu(j).cpustat.iowait; - j_dbs_info->prev_cpu_idle_down = - kstat_cpu(j).cpustat.idle + - kstat_cpu(j).cpustat.iowait; + j_dbs_info->prev_cpu_idle_up = get_cpu_idle_time(j); + j_dbs_info->prev_cpu_idle_down + = j_dbs_info->prev_cpu_idle_up; } this_dbs_info->enable = 1; sysfs_create_group(&policy->kobj, &dbs_attr_group); @@ -422,6 +424,7 @@ static int cpufreq_governor_dbs(struct cpufreq_policy *policy, def_sampling_rate = (latency / 1000) * DEF_SAMPLING_RATE_LATENCY_MULTIPLIER; dbs_tuners_ins.sampling_rate = def_sampling_rate; + dbs_tuners_ins.ignore_nice = 0; dbs_timer_init(); } @@ -461,12 +464,11 @@ static int cpufreq_governor_dbs(struct cpufreq_policy *policy, return 0; } -struct cpufreq_governor cpufreq_gov_dbs = { +static struct cpufreq_governor cpufreq_gov_dbs = { .name = "ondemand", .governor = cpufreq_governor_dbs, .owner = THIS_MODULE, }; -EXPORT_SYMBOL(cpufreq_gov_dbs); static int __init cpufreq_gov_dbs_init(void) { diff --git a/drivers/cpufreq/cpufreq_stats.c b/drivers/cpufreq/cpufreq_stats.c index 2084593937c..741b6b191e6 100644 --- a/drivers/cpufreq/cpufreq_stats.c +++ b/drivers/cpufreq/cpufreq_stats.c @@ -19,6 +19,7 @@ #include <linux/percpu.h> #include <linux/kobject.h> #include <linux/spinlock.h> +#include <asm/cputime.h> static spinlock_t cpufreq_stats_lock; @@ -29,20 +30,14 @@ static struct freq_attr _attr_##_name = {\ .show = _show,\ }; -static unsigned long -delta_time(unsigned long old, unsigned long new) -{ - return (old > new) ? (old - new): (new + ~old + 1); -} - struct cpufreq_stats { unsigned int cpu; unsigned int total_trans; - unsigned long long last_time; + unsigned long long last_time; unsigned int max_state; unsigned int state_num; unsigned int last_index; - unsigned long long *time_in_state; + cputime64_t *time_in_state; unsigned int *freq_table; #ifdef CONFIG_CPU_FREQ_STAT_DETAILS unsigned int *trans_table; @@ -60,12 +55,16 @@ static int cpufreq_stats_update (unsigned int cpu) { struct cpufreq_stats *stat; + unsigned long long cur_time; + + cur_time = get_jiffies_64(); spin_lock(&cpufreq_stats_lock); stat = cpufreq_stats_table[cpu]; if (stat->time_in_state) - stat->time_in_state[stat->last_index] += - delta_time(stat->last_time, jiffies); - stat->last_time = jiffies; + stat->time_in_state[stat->last_index] = + cputime64_add(stat->time_in_state[stat->last_index], + cputime_sub(cur_time, stat->last_time)); + stat->last_time = cur_time; spin_unlock(&cpufreq_stats_lock); return 0; } @@ -90,8 +89,8 @@ show_time_in_state(struct cpufreq_policy *policy, char *buf) return 0; cpufreq_stats_update(stat->cpu); for (i = 0; i < stat->state_num; i++) { - len += sprintf(buf + len, "%u %llu\n", - stat->freq_table[i], stat->time_in_state[i]); + len += sprintf(buf + len, "%u %llu\n", stat->freq_table[i], + (unsigned long long)cputime64_to_clock_t(stat->time_in_state[i])); } return len; } @@ -107,16 +106,30 @@ show_trans_table(struct cpufreq_policy *policy, char *buf) if(!stat) return 0; cpufreq_stats_update(stat->cpu); + len += snprintf(buf + len, PAGE_SIZE - len, " From : To\n"); + len += snprintf(buf + len, PAGE_SIZE - len, " : "); + for (i = 0; i < stat->state_num; i++) { + if (len >= PAGE_SIZE) + break; + len += snprintf(buf + len, PAGE_SIZE - len, "%9u ", + stat->freq_table[i]); + } + if (len >= PAGE_SIZE) + return len; + + len += snprintf(buf + len, PAGE_SIZE - len, "\n"); + for (i = 0; i < stat->state_num; i++) { if (len >= PAGE_SIZE) break; - len += snprintf(buf + len, PAGE_SIZE - len, "%9u:\t", + + len += snprintf(buf + len, PAGE_SIZE - len, "%9u: ", stat->freq_table[i]); for (j = 0; j < stat->state_num; j++) { if (len >= PAGE_SIZE) break; - len += snprintf(buf + len, PAGE_SIZE - len, "%u\t", + len += snprintf(buf + len, PAGE_SIZE - len, "%9u ", stat->trans_table[i*stat->max_state+j]); } len += snprintf(buf + len, PAGE_SIZE - len, "\n"); @@ -197,7 +210,7 @@ cpufreq_stats_create_table (struct cpufreq_policy *policy, count++; } - alloc_size = count * sizeof(int) + count * sizeof(long long); + alloc_size = count * sizeof(int) + count * sizeof(cputime64_t); #ifdef CONFIG_CPU_FREQ_STAT_DETAILS alloc_size += count * count * sizeof(int); @@ -224,7 +237,7 @@ cpufreq_stats_create_table (struct cpufreq_policy *policy, } stat->state_num = j; spin_lock(&cpufreq_stats_lock); - stat->last_time = jiffies; + stat->last_time = get_jiffies_64(); stat->last_index = freq_table_get_index(stat, policy->cur); spin_unlock(&cpufreq_stats_lock); cpufreq_cpu_put(data); diff --git a/drivers/firmware/pcdp.c b/drivers/firmware/pcdp.c index 6d5df6c2efa..df1b721154d 100644 --- a/drivers/firmware/pcdp.c +++ b/drivers/firmware/pcdp.c @@ -11,6 +11,7 @@ * published by the Free Software Foundation. */ +#include <linux/config.h> #include <linux/acpi.h> #include <linux/console.h> #include <linux/efi.h> diff --git a/drivers/i2c/busses/i2c-ali1563.c b/drivers/i2c/busses/i2c-ali1563.c index 35710818fe4..fdd881aee61 100644 --- a/drivers/i2c/busses/i2c-ali1563.c +++ b/drivers/i2c/busses/i2c-ali1563.c @@ -2,6 +2,7 @@ * i2c-ali1563.c - i2c driver for the ALi 1563 Southbridge * * Copyright (C) 2004 Patrick Mochel + * 2005 Rudolf Marek <r.marek@sh.cvut.cz> * * The 1563 southbridge is deceptively similar to the 1533, with a * few notable exceptions. One of those happens to be the fact they @@ -57,10 +58,11 @@ #define HST_CNTL2_BLOCK 0x05 +#define HST_CNTL2_SIZEMASK 0x38 static unsigned short ali1563_smba; -static int ali1563_transaction(struct i2c_adapter * a) +static int ali1563_transaction(struct i2c_adapter * a, int size) { u32 data; int timeout; @@ -73,7 +75,7 @@ static int ali1563_transaction(struct i2c_adapter * a) data = inb_p(SMB_HST_STS); if (data & HST_STS_BAD) { - dev_warn(&a->dev,"ali1563: Trying to reset busy device\n"); + dev_err(&a->dev, "ali1563: Trying to reset busy device\n"); outb_p(data | HST_STS_BAD,SMB_HST_STS); data = inb_p(SMB_HST_STS); if (data & HST_STS_BAD) @@ -94,19 +96,31 @@ static int ali1563_transaction(struct i2c_adapter * a) if (timeout && !(data & HST_STS_BAD)) return 0; - dev_warn(&a->dev, "SMBus Error: %s%s%s%s%s\n", - timeout ? "Timeout " : "", - data & HST_STS_FAIL ? "Transaction Failed " : "", - data & HST_STS_BUSERR ? "No response or Bus Collision " : "", - data & HST_STS_DEVERR ? "Device Error " : "", - !(data & HST_STS_DONE) ? "Transaction Never Finished " : ""); - if (!(data & HST_STS_DONE)) + if (!timeout) { + dev_err(&a->dev, "Timeout - Trying to KILL transaction!\n"); /* Issue 'kill' to host controller */ outb_p(HST_CNTL2_KILL,SMB_HST_CNTL2); - else - /* Issue timeout to reset all devices on bus */ + data = inb_p(SMB_HST_STS); + } + + /* device error - no response, ignore the autodetection case */ + if ((data & HST_STS_DEVERR) && (size != HST_CNTL2_QUICK)) { + dev_err(&a->dev, "Device error!\n"); + } + + /* bus collision */ + if (data & HST_STS_BUSERR) { + dev_err(&a->dev, "Bus collision!\n"); + /* Issue timeout, hoping it helps */ outb_p(HST_CNTL1_TIMEOUT,SMB_HST_CNTL1); + } + + if (data & HST_STS_FAIL) { + dev_err(&a->dev, "Cleaning fail after KILL!\n"); + outb_p(0x0,SMB_HST_CNTL2); + } + return -1; } @@ -149,7 +163,7 @@ static int ali1563_block_start(struct i2c_adapter * a) if (timeout && !(data & HST_STS_BAD)) return 0; - dev_warn(&a->dev, "SMBus Error: %s%s%s%s%s\n", + dev_err(&a->dev, "SMBus Error: %s%s%s%s%s\n", timeout ? "Timeout " : "", data & HST_STS_FAIL ? "Transaction Failed " : "", data & HST_STS_BUSERR ? "No response or Bus Collision " : "", @@ -242,13 +256,15 @@ static s32 ali1563_access(struct i2c_adapter * a, u16 addr, } outb_p(((addr & 0x7f) << 1) | (rw & 0x01), SMB_HST_ADD); - outb_p(inb_p(SMB_HST_CNTL2) | (size << 3), SMB_HST_CNTL2); + outb_p((inb_p(SMB_HST_CNTL2) & ~HST_CNTL2_SIZEMASK) | (size << 3), SMB_HST_CNTL2); /* Write the command register */ + switch(size) { case HST_CNTL2_BYTE: if (rw== I2C_SMBUS_WRITE) - outb_p(cmd, SMB_HST_CMD); + /* Beware it uses DAT0 register and not CMD! */ + outb_p(cmd, SMB_HST_DAT0); break; case HST_CNTL2_BYTE_DATA: outb_p(cmd, SMB_HST_CMD); @@ -268,7 +284,7 @@ static s32 ali1563_access(struct i2c_adapter * a, u16 addr, goto Done; } - if ((error = ali1563_transaction(a))) + if ((error = ali1563_transaction(a, size))) goto Done; if ((rw == I2C_SMBUS_WRITE) || (size == HST_CNTL2_QUICK)) diff --git a/drivers/ide/ide-cd.c b/drivers/ide/ide-cd.c index 78e3e7b24d7..39f3e9101ed 100644 --- a/drivers/ide/ide-cd.c +++ b/drivers/ide/ide-cd.c @@ -1936,7 +1936,7 @@ static ide_startstop_t cdrom_do_block_pc(ide_drive_t *drive, struct request *rq) * NOTE! The "len" and "addr" checks should possibly have * separate masks. */ - if ((rq->data_len & mask) || (addr & mask)) + if ((rq->data_len & 15) || (addr & mask)) info->dma = 0; } diff --git a/drivers/ide/pci/amd74xx.c b/drivers/ide/pci/amd74xx.c index 47225e32435..4e0f13d1d06 100644 --- a/drivers/ide/pci/amd74xx.c +++ b/drivers/ide/pci/amd74xx.c @@ -72,6 +72,7 @@ static struct amd_ide_chip { { PCI_DEVICE_ID_NVIDIA_NFORCE3S_SATA2, 0x50, AMD_UDMA_133 }, { PCI_DEVICE_ID_NVIDIA_NFORCE_CK804_IDE, 0x50, AMD_UDMA_133 }, { PCI_DEVICE_ID_NVIDIA_NFORCE_MCP04_IDE, 0x50, AMD_UDMA_133 }, + { PCI_DEVICE_ID_NVIDIA_NFORCE_MCP51_IDE, 0x50, AMD_UDMA_133 }, { 0 } }; @@ -487,6 +488,7 @@ static ide_pci_device_t amd74xx_chipsets[] __devinitdata = { /* 12 */ DECLARE_NV_DEV("NFORCE3-250-SATA2"), /* 13 */ DECLARE_NV_DEV("NFORCE-CK804"), /* 14 */ DECLARE_NV_DEV("NFORCE-MCP04"), + /* 15 */ DECLARE_NV_DEV("NFORCE-MCP51"), }; static int __devinit amd74xx_probe(struct pci_dev *dev, const struct pci_device_id *id) @@ -521,6 +523,7 @@ static struct pci_device_id amd74xx_pci_tbl[] = { #endif { PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_CK804_IDE, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 13 }, { PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP04_IDE, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 14 }, + { PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP51_IDE, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 15 }, { 0, }, }; MODULE_DEVICE_TABLE(pci, amd74xx_pci_tbl); diff --git a/drivers/input/gameport/Kconfig b/drivers/input/gameport/Kconfig index 6282f460aba..1d93f509290 100644 --- a/drivers/input/gameport/Kconfig +++ b/drivers/input/gameport/Kconfig @@ -68,23 +68,3 @@ config GAMEPORT_CS461X depends on PCI endif - -# Yes, SOUND_GAMEPORT looks a bit odd. Yes, it ends up being turned on -# in every .config. Please don't touch it. It is here to handle an -# unusual dependency between GAMEPORT and sound drivers. -# -# Some sound drivers call gameport functions. If GAMEPORT is -# not selected, empty stubs are provided for the functions and all is -# well. -# If GAMEPORT is built in, everything is fine. -# If GAMEPORT is a module, however, it would need to be loaded for the -# sound driver to be able to link properly. Therefore, the sound -# driver must be a module as well in that case. Since there's no way -# to express that directly in Kconfig, we use SOUND_GAMEPORT to -# express it. SOUND_GAMEPORT boils down to "if GAMEPORT is 'm', -# anything that depends on SOUND_GAMEPORT must be 'm' as well. if -# GAMEPORT is 'y' or 'n', it can be anything". -config SOUND_GAMEPORT - tristate - default m if GAMEPORT=m - default y diff --git a/drivers/input/joydev.c b/drivers/input/joydev.c index 7d7527f8b02..627d343dfba 100644 --- a/drivers/input/joydev.c +++ b/drivers/input/joydev.c @@ -422,7 +422,7 @@ static struct input_handle *joydev_connect(struct input_handler *handler, struct joydev->nkey++; } - for (i = 0; i < BTN_JOYSTICK - BTN_MISC + 1; i++) + for (i = 0; i < BTN_JOYSTICK - BTN_MISC; i++) if (test_bit(i + BTN_MISC, dev->keybit)) { joydev->keymap[i] = joydev->nkey; joydev->keypam[joydev->nkey] = i + BTN_MISC; diff --git a/drivers/input/keyboard/atkbd.c b/drivers/input/keyboard/atkbd.c index 79c332f16fc..af0446c6de8 100644 --- a/drivers/input/keyboard/atkbd.c +++ b/drivers/input/keyboard/atkbd.c @@ -171,9 +171,9 @@ static struct { unsigned char set2; } atkbd_scroll_keys[] = { { ATKBD_SCR_1, 0xc5 }, - { ATKBD_SCR_2, 0xa9 }, - { ATKBD_SCR_4, 0xb6 }, - { ATKBD_SCR_8, 0xa7 }, + { ATKBD_SCR_2, 0x9d }, + { ATKBD_SCR_4, 0xa4 }, + { ATKBD_SCR_8, 0x9b }, { ATKBD_SCR_CLICK, 0xe0 }, { ATKBD_SCR_LEFT, 0xcb }, { ATKBD_SCR_RIGHT, 0xd2 }, diff --git a/drivers/input/mouse/psmouse-base.c b/drivers/input/mouse/psmouse-base.c index cd8509549ea..019034b21a0 100644 --- a/drivers/input/mouse/psmouse-base.c +++ b/drivers/input/mouse/psmouse-base.c @@ -518,13 +518,16 @@ static int psmouse_probe(struct psmouse *psmouse) /* * First, we check if it's a mouse. It should send 0x00 or 0x03 * in case of an IntelliMouse in 4-byte mode or 0x04 for IM Explorer. + * Sunrex K8561 IR Keyboard/Mouse reports 0xff on second and subsequent + * ID queries, probably due to a firmware bug. */ param[0] = 0xa5; if (ps2_command(ps2dev, param, PSMOUSE_CMD_GETID)) return -1; - if (param[0] != 0x00 && param[0] != 0x03 && param[0] != 0x04) + if (param[0] != 0x00 && param[0] != 0x03 && + param[0] != 0x04 && param[0] != 0xff) return -1; /* @@ -972,7 +975,7 @@ static int psmouse_set_maxproto(const char *val, struct kernel_param *kp) return -EINVAL; if (!strncmp(val, "any", 3)) { - *((unsigned int *)kp->arg) = -1UL; + *((unsigned int *)kp->arg) = -1U; return 0; } diff --git a/drivers/input/mouse/synaptics.c b/drivers/input/mouse/synaptics.c index 69832f8fb72..36c721227b6 100644 --- a/drivers/input/mouse/synaptics.c +++ b/drivers/input/mouse/synaptics.c @@ -143,39 +143,6 @@ static int synaptics_identify(struct psmouse *psmouse) return -1; } -static void print_ident(struct synaptics_data *priv) -{ - printk(KERN_INFO "Synaptics Touchpad, model: %ld\n", SYN_ID_MODEL(priv->identity)); - printk(KERN_INFO " Firmware: %ld.%ld\n", SYN_ID_MAJOR(priv->identity), - SYN_ID_MINOR(priv->identity)); - if (SYN_MODEL_ROT180(priv->model_id)) - printk(KERN_INFO " 180 degree mounted touchpad\n"); - if (SYN_MODEL_PORTRAIT(priv->model_id)) - printk(KERN_INFO " portrait touchpad\n"); - printk(KERN_INFO " Sensor: %ld\n", SYN_MODEL_SENSOR(priv->model_id)); - if (SYN_MODEL_NEWABS(priv->model_id)) - printk(KERN_INFO " new absolute packet format\n"); - if (SYN_MODEL_PEN(priv->model_id)) - printk(KERN_INFO " pen detection\n"); - - if (SYN_CAP_EXTENDED(priv->capabilities)) { - printk(KERN_INFO " Touchpad has extended capability bits\n"); - if (SYN_CAP_MULTI_BUTTON_NO(priv->ext_cap)) - printk(KERN_INFO " -> %d multi-buttons, i.e. besides standard buttons\n", - (int)(SYN_CAP_MULTI_BUTTON_NO(priv->ext_cap))); - if (SYN_CAP_MIDDLE_BUTTON(priv->capabilities)) - printk(KERN_INFO " -> middle button\n"); - if (SYN_CAP_FOUR_BUTTON(priv->capabilities)) - printk(KERN_INFO " -> four buttons\n"); - if (SYN_CAP_MULTIFINGER(priv->capabilities)) - printk(KERN_INFO " -> multifinger detection\n"); - if (SYN_CAP_PALMDETECT(priv->capabilities)) - printk(KERN_INFO " -> palm detection\n"); - if (SYN_CAP_PASS_THROUGH(priv->capabilities)) - printk(KERN_INFO " -> pass-through port\n"); - } -} - static int synaptics_query_hardware(struct psmouse *psmouse) { int retries = 0; @@ -666,7 +633,11 @@ int synaptics_init(struct psmouse *psmouse) priv->pkt_type = SYN_MODEL_NEWABS(priv->model_id) ? SYN_NEWABS : SYN_OLDABS; - print_ident(priv); + printk(KERN_INFO "Synaptics Touchpad, model: %ld, fw: %ld.%ld, id: %#lx, caps: %#lx/%#lx\n", + SYN_ID_MODEL(priv->identity), + SYN_ID_MAJOR(priv->identity), SYN_ID_MINOR(priv->identity), + priv->model_id, priv->capabilities, priv->ext_cap); + set_input_params(&psmouse->dev, priv); psmouse->protocol_handler = synaptics_process_byte; diff --git a/drivers/input/mousedev.c b/drivers/input/mousedev.c index 564974ce579..96fb9870834 100644 --- a/drivers/input/mousedev.c +++ b/drivers/input/mousedev.c @@ -101,6 +101,7 @@ struct mousedev_list { unsigned char ready, buffer, bufsiz; unsigned char imexseq, impsseq; enum mousedev_emul mode; + unsigned long last_buttons; }; #define MOUSEDEV_SEQ_LEN 6 @@ -224,7 +225,7 @@ static void mousedev_notify_readers(struct mousedev *mousedev, struct mousedev_h spin_lock_irqsave(&list->packet_lock, flags); p = &list->packets[list->head]; - if (list->ready && p->buttons != packet->buttons) { + if (list->ready && p->buttons != mousedev->packet.buttons) { unsigned int new_head = (list->head + 1) % PACKET_QUEUE_LEN; if (new_head != list->tail) { p = &list->packets[list->head = new_head]; @@ -249,10 +250,13 @@ static void mousedev_notify_readers(struct mousedev *mousedev, struct mousedev_h p->dz += packet->dz; p->buttons = mousedev->packet.buttons; - list->ready = 1; + if (p->dx || p->dy || p->dz || p->buttons != list->last_buttons) + list->ready = 1; spin_unlock_irqrestore(&list->packet_lock, flags); - kill_fasync(&list->fasync, SIGIO, POLL_IN); + + if (list->ready) + kill_fasync(&list->fasync, SIGIO, POLL_IN); } wake_up_interruptible(&mousedev->wait); @@ -477,9 +481,10 @@ static void mousedev_packet(struct mousedev_list *list, signed char *ps2_data) } if (!p->dx && !p->dy && !p->dz) { - if (list->tail == list->head) + if (list->tail == list->head) { list->ready = 0; - else + list->last_buttons = p->buttons; + } else list->tail = (list->tail + 1) % PACKET_QUEUE_LEN; } diff --git a/drivers/input/serio/i8042-x86ia64io.h b/drivers/input/serio/i8042-x86ia64io.h index f64867808fe..0487ecbb8a4 100644 --- a/drivers/input/serio/i8042-x86ia64io.h +++ b/drivers/input/serio/i8042-x86ia64io.h @@ -88,9 +88,11 @@ static struct dmi_system_id __initdata i8042_dmi_noloop_table[] = { }; /* - * Some Fujitsu notebooks are ahving trouble with touhcpads if + * Some Fujitsu notebooks are having trouble with touchpads if * active multiplexing mode is activated. Luckily they don't have * external PS/2 ports so we can safely disable it. + * ... apparently some Toshibas don't like MUX mode either and + * die horrible death on reboot. */ static struct dmi_system_id __initdata i8042_dmi_nomux_table[] = { { @@ -115,12 +117,26 @@ static struct dmi_system_id __initdata i8042_dmi_nomux_table[] = { }, }, { + .ident = "Fujitsu Lifebook S6230", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU"), + DMI_MATCH(DMI_PRODUCT_NAME, "LifeBook S6230"), + }, + }, + { .ident = "Fujitsu T70H", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU"), DMI_MATCH(DMI_PRODUCT_NAME, "FMVLT70H"), }, }, + { + .ident = "Toshiba P10", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"), + DMI_MATCH(DMI_PRODUCT_NAME, "Satellite P10"), + }, + }, { } }; @@ -215,11 +231,15 @@ static struct pnp_driver i8042_pnp_aux_driver = { static void i8042_pnp_exit(void) { - if (i8042_pnp_kbd_registered) + if (i8042_pnp_kbd_registered) { + i8042_pnp_kbd_registered = 0; pnp_unregister_driver(&i8042_pnp_kbd_driver); + } - if (i8042_pnp_aux_registered) + if (i8042_pnp_aux_registered) { + i8042_pnp_aux_registered = 0; pnp_unregister_driver(&i8042_pnp_aux_driver); + } } static int i8042_pnp_init(void) @@ -227,7 +247,7 @@ static int i8042_pnp_init(void) int result_kbd, result_aux; if (i8042_nopnp) { - printk("i8042: PNP detection disabled\n"); + printk(KERN_INFO "i8042: PNP detection disabled\n"); return 0; } @@ -241,7 +261,7 @@ static int i8042_pnp_init(void) #if defined(__ia64__) return -ENODEV; #else - printk(KERN_WARNING "PNP: No PS/2 controller found. Probing ports directly.\n"); + printk(KERN_INFO "PNP: No PS/2 controller found. Probing ports directly.\n"); return 0; #endif } @@ -265,7 +285,7 @@ static int i8042_pnp_init(void) i8042_pnp_kbd_irq = i8042_kbd_irq; } - if (result_aux > 0 && !i8042_pnp_aux_irq) { + if (!i8042_pnp_aux_irq) { printk(KERN_WARNING "PNP: PS/2 controller doesn't have AUX irq; using default %#x\n", i8042_aux_irq); i8042_pnp_aux_irq = i8042_aux_irq; } diff --git a/drivers/input/serio/i8042.c b/drivers/input/serio/i8042.c index 8e63e464d36..5900de3c3f4 100644 --- a/drivers/input/serio/i8042.c +++ b/drivers/input/serio/i8042.c @@ -698,6 +698,26 @@ static void i8042_timer_func(unsigned long data) i8042_interrupt(0, NULL, NULL); } +static int i8042_ctl_test(void) +{ + unsigned char param; + + if (!i8042_reset) + return 0; + + if (i8042_command(¶m, I8042_CMD_CTL_TEST)) { + printk(KERN_ERR "i8042.c: i8042 controller self test timeout.\n"); + return -1; + } + + if (param != I8042_RET_CTL_TEST) { + printk(KERN_ERR "i8042.c: i8042 controller selftest failed. (%#x != %#x)\n", + param, I8042_RET_CTL_TEST); + return -1; + } + + return 0; +} /* * i8042_controller init initializes the i8042 controller, and, @@ -719,21 +739,8 @@ static int i8042_controller_init(void) return -1; } - if (i8042_reset) { - - unsigned char param; - - if (i8042_command(¶m, I8042_CMD_CTL_TEST)) { - printk(KERN_ERR "i8042.c: i8042 controller self test timeout.\n"); - return -1; - } - - if (param != I8042_RET_CTL_TEST) { - printk(KERN_ERR "i8042.c: i8042 controller selftest failed. (%#x != %#x)\n", - param, I8042_RET_CTL_TEST); - return -1; - } - } + if (i8042_ctl_test()) + return -1; /* * Save the CTR for restoral on unload / reboot. @@ -802,15 +809,11 @@ static int i8042_controller_init(void) */ static void i8042_controller_reset(void) { - unsigned char param; - /* * Reset the controller if requested. */ - if (i8042_reset) - if (i8042_command(¶m, I8042_CMD_CTL_TEST)) - printk(KERN_ERR "i8042.c: i8042 controller reset timeout.\n"); + i8042_ctl_test(); /* * Disable MUX mode if present. @@ -922,8 +925,11 @@ static int i8042_resume(struct device *dev, u32 level) if (level != RESUME_ENABLE) return 0; - if (i8042_controller_init()) { - printk(KERN_ERR "i8042: resume failed\n"); + if (i8042_ctl_test()) + return -1; + + if (i8042_command(&i8042_ctr, I8042_CMD_CTL_WCTR)) { + printk(KERN_ERR "i8042: Can't write CTR\n"); return -1; } diff --git a/drivers/input/touchscreen/gunze.c b/drivers/input/touchscreen/gunze.c index c9d0a153671..53a27e43dd2 100644 --- a/drivers/input/touchscreen/gunze.c +++ b/drivers/input/touchscreen/gunze.c @@ -68,8 +68,7 @@ static void gunze_process_packet(struct gunze* gunze, struct pt_regs *regs) if (gunze->idx != GUNZE_MAX_LENGTH || gunze->data[5] != ',' || (gunze->data[0] != 'T' && gunze->data[0] != 'R')) { - gunze->data[10] = 0; - printk(KERN_WARNING "gunze.c: bad packet: >%s<\n", gunze->data); + printk(KERN_WARNING "gunze.c: bad packet: >%.*s<\n", GUNZE_MAX_LENGTH, gunze->data); return; } diff --git a/drivers/macintosh/via-pmu.c b/drivers/macintosh/via-pmu.c index e654aa5eecd..bb9f4044c74 100644 --- a/drivers/macintosh/via-pmu.c +++ b/drivers/macintosh/via-pmu.c @@ -2421,7 +2421,7 @@ pmac_wakeup_devices(void) /* Re-enable local CPU interrupts */ local_irq_enable(); - mdelay(100); + mdelay(10); preempt_enable(); /* Re-enable clock spreading on some machines */ @@ -2549,7 +2549,9 @@ powerbook_sleep_Core99(void) return ret; } - printk(KERN_DEBUG "HID1, before: %x\n", mfspr(SPRN_HID1)); + /* Stop environment and ADB interrupts */ + pmu_request(&req, NULL, 2, PMU_SET_INTR_MASK, 0); + pmu_wait_complete(&req); /* Tell PMU what events will wake us up */ pmu_request(&req, NULL, 4, PMU_POWER_EVENTS, PMU_PWR_CLR_WAKEUP_EVENTS, @@ -2611,8 +2613,6 @@ powerbook_sleep_Core99(void) pmu_request(&req, NULL, 2, PMU_SET_INTR_MASK, pmu_intr_mask); pmu_wait_complete(&req); - printk(KERN_DEBUG "HID1, after: %x\n", mfspr(SPRN_HID1)); - pmac_wakeup_devices(); return 0; diff --git a/drivers/media/dvb/bt8xx/dst.c b/drivers/media/dvb/bt8xx/dst.c index d047e349d70..1339912c308 100644 --- a/drivers/media/dvb/bt8xx/dst.c +++ b/drivers/media/dvb/bt8xx/dst.c @@ -906,22 +906,12 @@ static int dst_tone_power_cmd(struct dst_state* state) if (state->dst_type == DST_TYPE_IS_TERR) return 0; - if (state->voltage == SEC_VOLTAGE_OFF) - paket[4] = 0; - else - paket[4] = 1; - - if (state->tone == SEC_TONE_ON) - paket[2] = 0x02; - else - paket[2] = 0; - if (state->minicmd == SEC_MINI_A) - paket[3] = 0x02; - else - paket[3] = 0; - + paket[4] = state->tx_tuna[4]; + paket[2] = state->tx_tuna[2]; + paket[3] = state->tx_tuna[3]; paket[7] = dst_check_sum (paket, 7); dst_command(state, paket, 8); + return 0; } @@ -980,7 +970,7 @@ static int dst_set_voltage(struct dvb_frontend* fe, fe_sec_voltage_t voltage); static int dst_write_tuna(struct dvb_frontend* fe) { - struct dst_state* state = (struct dst_state*) fe->demodulator_priv; + struct dst_state* state = fe->demodulator_priv; int retval; u8 reply; @@ -1048,10 +1038,10 @@ static int dst_write_tuna(struct dvb_frontend* fe) static int dst_set_diseqc(struct dvb_frontend* fe, struct dvb_diseqc_master_cmd* cmd) { - struct dst_state* state = (struct dst_state*) fe->demodulator_priv; + struct dst_state* state = fe->demodulator_priv; u8 paket[8] = { 0x00, 0x08, 0x04, 0xe0, 0x10, 0x38, 0xf0, 0xec }; - if (state->dst_type == DST_TYPE_IS_TERR) + if (state->dst_type != DST_TYPE_IS_SAT) return 0; if (cmd->msg_len == 0 || cmd->msg_len > 4) @@ -1064,39 +1054,32 @@ static int dst_set_diseqc(struct dvb_frontend* fe, struct dvb_diseqc_master_cmd* static int dst_set_voltage(struct dvb_frontend* fe, fe_sec_voltage_t voltage) { - u8 *val; int need_cmd; - struct dst_state* state = (struct dst_state*) fe->demodulator_priv; + struct dst_state* state = fe->demodulator_priv; state->voltage = voltage; - if (state->dst_type == DST_TYPE_IS_TERR) + if (state->dst_type != DST_TYPE_IS_SAT) return 0; need_cmd = 0; - val = &state->tx_tuna[0]; - val[8] &= ~0x40; switch (voltage) { - case SEC_VOLTAGE_13: - if ((state->diseq_flags & HAS_POWER) == 0) - need_cmd = 1; - state->diseq_flags |= HAS_POWER; - break; + case SEC_VOLTAGE_13: + case SEC_VOLTAGE_18: + if ((state->diseq_flags & HAS_POWER) == 0) + need_cmd = 1; + state->diseq_flags |= HAS_POWER; + state->tx_tuna[4] = 0x01; + break; - case SEC_VOLTAGE_18: - if ((state->diseq_flags & HAS_POWER) == 0) + case SEC_VOLTAGE_OFF: need_cmd = 1; - state->diseq_flags |= HAS_POWER; - val[8] |= 0x40; - break; - - case SEC_VOLTAGE_OFF: - need_cmd = 1; - state->diseq_flags &= ~(HAS_POWER | HAS_LOCK | ATTEMPT_TUNE); - break; + state->diseq_flags &= ~(HAS_POWER | HAS_LOCK | ATTEMPT_TUNE); + state->tx_tuna[4] = 0x00; + break; - default: - return -EINVAL; + default: + return -EINVAL; } if (need_cmd) dst_tone_power_cmd(state); @@ -1106,37 +1089,56 @@ static int dst_set_voltage(struct dvb_frontend* fe, fe_sec_voltage_t voltage) static int dst_set_tone(struct dvb_frontend* fe, fe_sec_tone_mode_t tone) { - u8 *val; - struct dst_state* state = (struct dst_state*) fe->demodulator_priv; + struct dst_state* state = fe->demodulator_priv; state->tone = tone; - if (state->dst_type == DST_TYPE_IS_TERR) + if (state->dst_type != DST_TYPE_IS_SAT) return 0; - val = &state->tx_tuna[0]; + switch (tone) { + case SEC_TONE_OFF: + state->tx_tuna[2] = 0xff; + break; - val[8] &= ~0x1; + case SEC_TONE_ON: + state->tx_tuna[2] = 0x02; + break; - switch (tone) { - case SEC_TONE_OFF: - break; + default: + return -EINVAL; + } + dst_tone_power_cmd(state); - case SEC_TONE_ON: - val[8] |= 1; - break; + return 0; +} - default: - return -EINVAL; +static int dst_send_burst(struct dvb_frontend *fe, fe_sec_mini_cmd_t minicmd) +{ + struct dst_state *state = fe->demodulator_priv; + + if (state->dst_type != DST_TYPE_IS_SAT) + return 0; + + state->minicmd = minicmd; + + switch (minicmd) { + case SEC_MINI_A: + state->tx_tuna[3] = 0x02; + break; + case SEC_MINI_B: + state->tx_tuna[3] = 0xff; + break; } dst_tone_power_cmd(state); return 0; } + static int dst_init(struct dvb_frontend* fe) { - struct dst_state* state = (struct dst_state*) fe->demodulator_priv; + struct dst_state* state = fe->demodulator_priv; static u8 ini_satci_tuna[] = { 9, 0, 3, 0xb6, 1, 0, 0x73, 0x21, 0, 0 }; static u8 ini_satfta_tuna[] = { 0, 0, 3, 0xb6, 1, 0x55, 0xbd, 0x50, 0, 0 }; static u8 ini_tvfta_tuna[] = { 0, 0, 3, 0xb6, 1, 7, 0x0, 0x0, 0, 0 }; @@ -1168,7 +1170,7 @@ static int dst_init(struct dvb_frontend* fe) static int dst_read_status(struct dvb_frontend* fe, fe_status_t* status) { - struct dst_state* state = (struct dst_state*) fe->demodulator_priv; + struct dst_state* state = fe->demodulator_priv; *status = 0; if (state->diseq_flags & HAS_LOCK) { @@ -1182,7 +1184,7 @@ static int dst_read_status(struct dvb_frontend* fe, fe_status_t* status) static int dst_read_signal_strength(struct dvb_frontend* fe, u16* strength) { - struct dst_state* state = (struct dst_state*) fe->demodulator_priv; + struct dst_state* state = fe->demodulator_priv; dst_get_signal(state); *strength = state->decode_strength; @@ -1192,7 +1194,7 @@ static int dst_read_signal_strength(struct dvb_frontend* fe, u16* strength) static int dst_read_snr(struct dvb_frontend* fe, u16* snr) { - struct dst_state* state = (struct dst_state*) fe->demodulator_priv; + struct dst_state* state = fe->demodulator_priv; dst_get_signal(state); *snr = state->decode_snr; @@ -1202,7 +1204,7 @@ static int dst_read_snr(struct dvb_frontend* fe, u16* snr) static int dst_set_frontend(struct dvb_frontend* fe, struct dvb_frontend_parameters *p) { - struct dst_state* state = (struct dst_state*) fe->demodulator_priv; + struct dst_state* state = fe->demodulator_priv; dst_set_freq(state, p->frequency); if (verbose > 4) @@ -1228,7 +1230,7 @@ static int dst_set_frontend(struct dvb_frontend* fe, struct dvb_frontend_paramet static int dst_get_frontend(struct dvb_frontend* fe, struct dvb_frontend_parameters *p) { - struct dst_state* state = (struct dst_state*) fe->demodulator_priv; + struct dst_state* state = fe->demodulator_priv; p->frequency = state->decode_freq; p->inversion = state->inversion; @@ -1248,7 +1250,7 @@ static int dst_get_frontend(struct dvb_frontend* fe, struct dvb_frontend_paramet static void dst_release(struct dvb_frontend* fe) { - struct dst_state* state = (struct dst_state*) fe->demodulator_priv; + struct dst_state* state = fe->demodulator_priv; kfree(state); } @@ -1346,7 +1348,7 @@ static struct dvb_frontend_ops dst_dvbs_ops = { .read_signal_strength = dst_read_signal_strength, .read_snr = dst_read_snr, - .diseqc_send_burst = dst_set_tone, + .diseqc_send_burst = dst_send_burst, .diseqc_send_master_cmd = dst_set_diseqc, .set_voltage = dst_set_voltage, .set_tone = dst_set_tone, diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c index f10dd74988c..fc9b5cd957a 100644 --- a/drivers/net/tg3.c +++ b/drivers/net/tg3.c @@ -133,6 +133,8 @@ /* number of ETHTOOL_GSTATS u64's */ #define TG3_NUM_STATS (sizeof(struct tg3_ethtool_stats)/sizeof(u64)) +#define TG3_NUM_TEST 6 + static char version[] __devinitdata = DRV_MODULE_NAME ".c:v" DRV_MODULE_VERSION " (" DRV_MODULE_RELDATE ")\n"; @@ -316,6 +318,17 @@ static struct { { "nic_tx_threshold_hit" } }; +static struct { + const char string[ETH_GSTRING_LEN]; +} ethtool_test_keys[TG3_NUM_TEST] = { + { "nvram test (online) " }, + { "link test (online) " }, + { "register test (offline)" }, + { "memory test (offline)" }, + { "loopback test (offline)" }, + { "interrupt test (offline)" }, +}; + static void tg3_write_indirect_reg32(struct tg3 *tp, u32 off, u32 val) { if ((tp->tg3_flags & TG3_FLAG_PCIX_TARGET_HWBUG) != 0) { @@ -3070,7 +3083,7 @@ static irqreturn_t tg3_test_isr(int irq, void *dev_id, } static int tg3_init_hw(struct tg3 *); -static int tg3_halt(struct tg3 *, int); +static int tg3_halt(struct tg3 *, int, int); #ifdef CONFIG_NET_POLL_CONTROLLER static void tg3_poll_controller(struct net_device *dev) @@ -3094,7 +3107,7 @@ static void tg3_reset_task(void *_data) restart_timer = tp->tg3_flags2 & TG3_FLG2_RESTART_TIMER; tp->tg3_flags2 &= ~TG3_FLG2_RESTART_TIMER; - tg3_halt(tp, 0); + tg3_halt(tp, RESET_KIND_SHUTDOWN, 0); tg3_init_hw(tp); tg3_netif_start(tp); @@ -3440,7 +3453,7 @@ static int tg3_change_mtu(struct net_device *dev, int new_mtu) spin_lock_irq(&tp->lock); spin_lock(&tp->tx_lock); - tg3_halt(tp, 1); + tg3_halt(tp, RESET_KIND_SHUTDOWN, 1); tg3_set_mtu(dev, tp, new_mtu); @@ -4131,19 +4144,19 @@ static void tg3_stop_fw(struct tg3 *tp) } /* tp->lock is held. */ -static int tg3_halt(struct tg3 *tp, int silent) +static int tg3_halt(struct tg3 *tp, int kind, int silent) { int err; tg3_stop_fw(tp); - tg3_write_sig_pre_reset(tp, RESET_KIND_SHUTDOWN); + tg3_write_sig_pre_reset(tp, kind); tg3_abort_hw(tp, silent); err = tg3_chip_reset(tp); - tg3_write_sig_legacy(tp, RESET_KIND_SHUTDOWN); - tg3_write_sig_post_reset(tp, RESET_KIND_SHUTDOWN); + tg3_write_sig_legacy(tp, kind); + tg3_write_sig_post_reset(tp, kind); if (err) return err; @@ -4357,7 +4370,12 @@ static int tg3_load_firmware_cpu(struct tg3 *tp, u32 cpu_base, u32 cpu_scratch_b */ tp->tg3_flags |= TG3_FLAG_PCIX_TARGET_HWBUG; + /* It is possible that bootcode is still loading at this point. + * Get the nvram lock first before halting the cpu. + */ + tg3_nvram_lock(tp); err = tg3_halt_cpu(tp, cpu_base); + tg3_nvram_unlock(tp); if (err) goto out; @@ -5881,6 +5899,9 @@ static int tg3_test_interrupt(struct tg3 *tp) int err, i; u32 int_mbox = 0; + if (!netif_running(dev)) + return -ENODEV; + tg3_disable_ints(tp); free_irq(tp->pdev->irq, dev); @@ -5984,7 +6005,7 @@ static int tg3_test_msi(struct tg3 *tp) spin_lock_irq(&tp->lock); spin_lock(&tp->tx_lock); - tg3_halt(tp, 1); + tg3_halt(tp, RESET_KIND_SHUTDOWN, 1); err = tg3_init_hw(tp); spin_unlock(&tp->tx_lock); @@ -6060,7 +6081,7 @@ static int tg3_open(struct net_device *dev) err = tg3_init_hw(tp); if (err) { - tg3_halt(tp, 1); + tg3_halt(tp, RESET_KIND_SHUTDOWN, 1); tg3_free_rings(tp); } else { if (tp->tg3_flags & TG3_FLAG_TAGGED_STATUS) @@ -6104,7 +6125,7 @@ static int tg3_open(struct net_device *dev) pci_disable_msi(tp->pdev); tp->tg3_flags2 &= ~TG3_FLG2_USING_MSI; } - tg3_halt(tp, 1); + tg3_halt(tp, RESET_KIND_SHUTDOWN, 1); tg3_free_rings(tp); tg3_free_consistent(tp); @@ -6377,7 +6398,7 @@ static int tg3_close(struct net_device *dev) tg3_disable_ints(tp); - tg3_halt(tp, 1); + tg3_halt(tp, RESET_KIND_SHUTDOWN, 1); tg3_free_rings(tp); tp->tg3_flags &= ~(TG3_FLAG_INIT_COMPLETE | @@ -7097,7 +7118,7 @@ static int tg3_set_ringparam(struct net_device *dev, struct ethtool_ringparam *e tp->tx_pending = ering->tx_pending; if (netif_running(dev)) { - tg3_halt(tp, 1); + tg3_halt(tp, RESET_KIND_SHUTDOWN, 1); tg3_init_hw(tp); tg3_netif_start(tp); } @@ -7140,7 +7161,7 @@ static int tg3_set_pauseparam(struct net_device *dev, struct ethtool_pauseparam tp->tg3_flags &= ~TG3_FLAG_TX_PAUSE; if (netif_running(dev)) { - tg3_halt(tp, 1); + tg3_halt(tp, RESET_KIND_SHUTDOWN, 1); tg3_init_hw(tp); tg3_netif_start(tp); } @@ -7199,12 +7220,20 @@ static int tg3_get_stats_count (struct net_device *dev) return TG3_NUM_STATS; } +static int tg3_get_test_count (struct net_device *dev) +{ + return TG3_NUM_TEST; +} + static void tg3_get_strings (struct net_device *dev, u32 stringset, u8 *buf) { switch (stringset) { case ETH_SS_STATS: memcpy(buf, ðtool_stats_keys, sizeof(ethtool_stats_keys)); break; + case ETH_SS_TEST: + memcpy(buf, ðtool_test_keys, sizeof(ethtool_test_keys)); + break; default: WARN_ON(1); /* we need a WARN() */ break; @@ -7218,6 +7247,516 @@ static void tg3_get_ethtool_stats (struct net_device *dev, memcpy(tmp_stats, tg3_get_estats(tp), sizeof(tp->estats)); } +#define NVRAM_TEST_SIZE 0x100 + +static int tg3_test_nvram(struct tg3 *tp) +{ + u32 *buf, csum; + int i, j, err = 0; + + buf = kmalloc(NVRAM_TEST_SIZE, GFP_KERNEL); + if (buf == NULL) + return -ENOMEM; + + for (i = 0, j = 0; i < NVRAM_TEST_SIZE; i += 4, j++) { + u32 val; + + if ((err = tg3_nvram_read(tp, i, &val)) != 0) + break; + buf[j] = cpu_to_le32(val); + } + if (i < NVRAM_TEST_SIZE) + goto out; + + err = -EIO; + if (cpu_to_be32(buf[0]) != TG3_EEPROM_MAGIC) + goto out; + + /* Bootstrap checksum at offset 0x10 */ + csum = calc_crc((unsigned char *) buf, 0x10); + if(csum != cpu_to_le32(buf[0x10/4])) + goto out; + + /* Manufacturing block starts at offset 0x74, checksum at 0xfc */ + csum = calc_crc((unsigned char *) &buf[0x74/4], 0x88); + if (csum != cpu_to_le32(buf[0xfc/4])) + goto out; + + err = 0; + +out: + kfree(buf); + return err; +} + +#define TG3_SERDES_TIMEOUT_SEC 2 +#define TG3_COPPER_TIMEOUT_SEC 6 + +static int tg3_test_link(struct tg3 *tp) +{ + int i, max; + + if (!netif_running(tp->dev)) + return -ENODEV; + + if (tp->tg3_flags2 & TG3_FLG2_PHY_SERDES) + max = TG3_SERDES_TIMEOUT_SEC; + else + max = TG3_COPPER_TIMEOUT_SEC; + + for (i = 0; i < max; i++) { + if (netif_carrier_ok(tp->dev)) + return 0; + + if (msleep_interruptible(1000)) + break; + } + + return -EIO; +} + +/* Only test the commonly used registers */ +static int tg3_test_registers(struct tg3 *tp) +{ + int i, is_5705; + u32 offset, read_mask, write_mask, val, save_val, read_val; + static struct { + u16 offset; + u16 flags; +#define TG3_FL_5705 0x1 +#define TG3_FL_NOT_5705 0x2 +#define TG3_FL_NOT_5788 0x4 + u32 read_mask; + u32 write_mask; + } reg_tbl[] = { + /* MAC Control Registers */ + { MAC_MODE, TG3_FL_NOT_5705, + 0x00000000, 0x00ef6f8c }, + { MAC_MODE, TG3_FL_5705, + 0x00000000, 0x01ef6b8c }, + { MAC_STATUS, TG3_FL_NOT_5705, + 0x03800107, 0x00000000 }, + { MAC_STATUS, TG3_FL_5705, + 0x03800100, 0x00000000 }, + { MAC_ADDR_0_HIGH, 0x0000, + 0x00000000, 0x0000ffff }, + { MAC_ADDR_0_LOW, 0x0000, + 0x00000000, 0xffffffff }, + { MAC_RX_MTU_SIZE, 0x0000, + 0x00000000, 0x0000ffff }, + { MAC_TX_MODE, 0x0000, + 0x00000000, 0x00000070 }, + { MAC_TX_LENGTHS, 0x0000, + 0x00000000, 0x00003fff }, + { MAC_RX_MODE, TG3_FL_NOT_5705, + 0x00000000, 0x000007fc }, + { MAC_RX_MODE, TG3_FL_5705, + 0x00000000, 0x000007dc }, + { MAC_HASH_REG_0, 0x0000, + 0x00000000, 0xffffffff }, + { MAC_HASH_REG_1, 0x0000, + 0x00000000, 0xffffffff }, + { MAC_HASH_REG_2, 0x0000, + 0x00000000, 0xffffffff }, + { MAC_HASH_REG_3, 0x0000, + 0x00000000, 0xffffffff }, + + /* Receive Data and Receive BD Initiator Control Registers. */ + { RCVDBDI_JUMBO_BD+0, TG3_FL_NOT_5705, + 0x00000000, 0xffffffff }, + { RCVDBDI_JUMBO_BD+4, TG3_FL_NOT_5705, + 0x00000000, 0xffffffff }, + { RCVDBDI_JUMBO_BD+8, TG3_FL_NOT_5705, + 0x00000000, 0x00000003 }, + { RCVDBDI_JUMBO_BD+0xc, TG3_FL_NOT_5705, + 0x00000000, 0xffffffff }, + { RCVDBDI_STD_BD+0, 0x0000, + 0x00000000, 0xffffffff }, + { RCVDBDI_STD_BD+4, 0x0000, + 0x00000000, 0xffffffff }, + { RCVDBDI_STD_BD+8, 0x0000, + 0x00000000, 0xffff0002 }, + { RCVDBDI_STD_BD+0xc, 0x0000, + 0x00000000, 0xffffffff }, + + /* Receive BD Initiator Control Registers. */ + { RCVBDI_STD_THRESH, TG3_FL_NOT_5705, + 0x00000000, 0xffffffff }, + { RCVBDI_STD_THRESH, TG3_FL_5705, + 0x00000000, 0x000003ff }, + { RCVBDI_JUMBO_THRESH, TG3_FL_NOT_5705, + 0x00000000, 0xffffffff }, + + /* Host Coalescing Control Registers. */ + { HOSTCC_MODE, TG3_FL_NOT_5705, + 0x00000000, 0x00000004 }, + { HOSTCC_MODE, TG3_FL_5705, + 0x00000000, 0x000000f6 }, + { HOSTCC_RXCOL_TICKS, TG3_FL_NOT_5705, + 0x00000000, 0xffffffff }, + { HOSTCC_RXCOL_TICKS, TG3_FL_5705, + 0x00000000, 0x000003ff }, + { HOSTCC_TXCOL_TICKS, TG3_FL_NOT_5705, + 0x00000000, 0xffffffff }, + { HOSTCC_TXCOL_TICKS, TG3_FL_5705, + 0x00000000, 0x000003ff }, + { HOSTCC_RXMAX_FRAMES, TG3_FL_NOT_5705, + 0x00000000, 0xffffffff }, + { HOSTCC_RXMAX_FRAMES, TG3_FL_5705 | TG3_FL_NOT_5788, + 0x00000000, 0x000000ff }, + { HOSTCC_TXMAX_FRAMES, TG3_FL_NOT_5705, + 0x00000000, 0xffffffff }, + { HOSTCC_TXMAX_FRAMES, TG3_FL_5705 | TG3_FL_NOT_5788, + 0x00000000, 0x000000ff }, + { HOSTCC_RXCOAL_TICK_INT, TG3_FL_NOT_5705, + 0x00000000, 0xffffffff }, + { HOSTCC_TXCOAL_TICK_INT, TG3_FL_NOT_5705, + 0x00000000, 0xffffffff }, + { HOSTCC_RXCOAL_MAXF_INT, TG3_FL_NOT_5705, + 0x00000000, 0xffffffff }, + { HOSTCC_RXCOAL_MAXF_INT, TG3_FL_5705 | TG3_FL_NOT_5788, + 0x00000000, 0x000000ff }, + { HOSTCC_TXCOAL_MAXF_INT, TG3_FL_NOT_5705, + 0x00000000, 0xffffffff }, + { HOSTCC_TXCOAL_MAXF_INT, TG3_FL_5705 | TG3_FL_NOT_5788, + 0x00000000, 0x000000ff }, + { HOSTCC_STAT_COAL_TICKS, TG3_FL_NOT_5705, + 0x00000000, 0xffffffff }, + { HOSTCC_STATS_BLK_HOST_ADDR, TG3_FL_NOT_5705, + 0x00000000, 0xffffffff }, + { HOSTCC_STATS_BLK_HOST_ADDR+4, TG3_FL_NOT_5705, + 0x00000000, 0xffffffff }, + { HOSTCC_STATUS_BLK_HOST_ADDR, 0x0000, + 0x00000000, 0xffffffff }, + { HOSTCC_STATUS_BLK_HOST_ADDR+4, 0x0000, + 0x00000000, 0xffffffff }, + { HOSTCC_STATS_BLK_NIC_ADDR, 0x0000, + 0xffffffff, 0x00000000 }, + { HOSTCC_STATUS_BLK_NIC_ADDR, 0x0000, + 0xffffffff, 0x00000000 }, + + /* Buffer Manager Control Registers. */ + { BUFMGR_MB_POOL_ADDR, 0x0000, + 0x00000000, 0x007fff80 }, + { BUFMGR_MB_POOL_SIZE, 0x0000, + 0x00000000, 0x007fffff }, + { BUFMGR_MB_RDMA_LOW_WATER, 0x0000, + 0x00000000, 0x0000003f }, + { BUFMGR_MB_MACRX_LOW_WATER, 0x0000, + 0x00000000, 0x000001ff }, + { BUFMGR_MB_HIGH_WATER, 0x0000, + 0x00000000, 0x000001ff }, + { BUFMGR_DMA_DESC_POOL_ADDR, TG3_FL_NOT_5705, + 0xffffffff, 0x00000000 }, + { BUFMGR_DMA_DESC_POOL_SIZE, TG3_FL_NOT_5705, + 0xffffffff, 0x00000000 }, + + /* Mailbox Registers */ + { GRCMBOX_RCVSTD_PROD_IDX+4, 0x0000, + 0x00000000, 0x000001ff }, + { GRCMBOX_RCVJUMBO_PROD_IDX+4, TG3_FL_NOT_5705, + 0x00000000, 0x000001ff }, + { GRCMBOX_RCVRET_CON_IDX_0+4, 0x0000, + 0x00000000, 0x000007ff }, + { GRCMBOX_SNDHOST_PROD_IDX_0+4, 0x0000, + 0x00000000, 0x000001ff }, + + { 0xffff, 0x0000, 0x00000000, 0x00000000 }, + }; + + if (tp->tg3_flags2 & TG3_FLG2_5705_PLUS) + is_5705 = 1; + else + is_5705 = 0; + + for (i = 0; reg_tbl[i].offset != 0xffff; i++) { + if (is_5705 && (reg_tbl[i].flags & TG3_FL_NOT_5705)) + continue; + + if (!is_5705 && (reg_tbl[i].flags & TG3_FL_5705)) + continue; + + if ((tp->tg3_flags2 & TG3_FLG2_IS_5788) && + (reg_tbl[i].flags & TG3_FL_NOT_5788)) + continue; + + offset = (u32) reg_tbl[i].offset; + read_mask = reg_tbl[i].read_mask; + write_mask = reg_tbl[i].write_mask; + + /* Save the original register content */ + save_val = tr32(offset); + + /* Determine the read-only value. */ + read_val = save_val & read_mask; + + /* Write zero to the register, then make sure the read-only bits + * are not changed and the read/write bits are all zeros. + */ + tw32(offset, 0); + + val = tr32(offset); + + /* Test the read-only and read/write bits. */ + if (((val & read_mask) != read_val) || (val & write_mask)) + goto out; + + /* Write ones to all the bits defined by RdMask and WrMask, then + * make sure the read-only bits are not changed and the + * read/write bits are all ones. + */ + tw32(offset, read_mask | write_mask); + + val = tr32(offset); + + /* Test the read-only bits. */ + if ((val & read_mask) != read_val) + goto out; + + /* Test the read/write bits. */ + if ((val & write_mask) != write_mask) + goto out; + + tw32(offset, save_val); + } + + return 0; + +out: + printk(KERN_ERR PFX "Register test failed at offset %x\n", offset); + tw32(offset, save_val); + return -EIO; +} + +static int tg3_do_mem_test(struct tg3 *tp, u32 offset, u32 len) +{ + static u32 test_pattern[] = { 0x00000000, 0xffffffff, 0xaa55a55a }; + int i; + u32 j; + + for (i = 0; i < sizeof(test_pattern)/sizeof(u32); i++) { + for (j = 0; j < len; j += 4) { + u32 val; + + tg3_write_mem(tp, offset + j, test_pattern[i]); + tg3_read_mem(tp, offset + j, &val); + if (val != test_pattern[i]) + return -EIO; + } + } + return 0; +} + +static int tg3_test_memory(struct tg3 *tp) +{ + static struct mem_entry { + u32 offset; + u32 len; + } mem_tbl_570x[] = { + { 0x00000000, 0x01000}, + { 0x00002000, 0x1c000}, + { 0xffffffff, 0x00000} + }, mem_tbl_5705[] = { + { 0x00000100, 0x0000c}, + { 0x00000200, 0x00008}, + { 0x00000b50, 0x00400}, + { 0x00004000, 0x00800}, + { 0x00006000, 0x01000}, + { 0x00008000, 0x02000}, + { 0x00010000, 0x0e000}, + { 0xffffffff, 0x00000} + }; + struct mem_entry *mem_tbl; + int err = 0; + int i; + + if (tp->tg3_flags2 & TG3_FLG2_5705_PLUS) + mem_tbl = mem_tbl_5705; + else + mem_tbl = mem_tbl_570x; + + for (i = 0; mem_tbl[i].offset != 0xffffffff; i++) { + if ((err = tg3_do_mem_test(tp, mem_tbl[i].offset, + mem_tbl[i].len)) != 0) + break; + } + + return err; +} + +static int tg3_test_loopback(struct tg3 *tp) +{ + u32 mac_mode, send_idx, rx_start_idx, rx_idx, tx_idx, opaque_key; + u32 desc_idx; + struct sk_buff *skb, *rx_skb; + u8 *tx_data; + dma_addr_t map; + int num_pkts, tx_len, rx_len, i, err; + struct tg3_rx_buffer_desc *desc; + + if (!netif_running(tp->dev)) + return -ENODEV; + + err = -EIO; + + tg3_abort_hw(tp, 1); + + /* Clearing this flag to keep interrupts disabled */ + tp->tg3_flags &= ~TG3_FLAG_INIT_COMPLETE; + tg3_reset_hw(tp); + + mac_mode = (tp->mac_mode & ~MAC_MODE_PORT_MODE_MASK) | + MAC_MODE_PORT_INT_LPBACK | MAC_MODE_LINK_POLARITY | + MAC_MODE_PORT_MODE_GMII; + tw32(MAC_MODE, mac_mode); + + tx_len = 1514; + skb = dev_alloc_skb(tx_len); + tx_data = skb_put(skb, tx_len); + memcpy(tx_data, tp->dev->dev_addr, 6); + memset(tx_data + 6, 0x0, 8); + + tw32(MAC_RX_MTU_SIZE, tx_len + 4); + + for (i = 14; i < tx_len; i++) + tx_data[i] = (u8) (i & 0xff); + + map = pci_map_single(tp->pdev, skb->data, tx_len, PCI_DMA_TODEVICE); + + tw32_f(HOSTCC_MODE, tp->coalesce_mode | HOSTCC_MODE_ENABLE | + HOSTCC_MODE_NOW); + + udelay(10); + + rx_start_idx = tp->hw_status->idx[0].rx_producer; + + send_idx = 0; + num_pkts = 0; + + tg3_set_txd(tp, send_idx, map, tx_len, 0, 1); + + send_idx++; + num_pkts++; + + tw32_tx_mbox(MAILBOX_SNDHOST_PROD_IDX_0 + TG3_64BIT_REG_LOW, send_idx); + tr32(MAILBOX_SNDHOST_PROD_IDX_0 + TG3_64BIT_REG_LOW); + + udelay(10); + + for (i = 0; i < 10; i++) { + tw32_f(HOSTCC_MODE, tp->coalesce_mode | HOSTCC_MODE_ENABLE | + HOSTCC_MODE_NOW); + + udelay(10); + + tx_idx = tp->hw_status->idx[0].tx_consumer; + rx_idx = tp->hw_status->idx[0].rx_producer; + if ((tx_idx == send_idx) && + (rx_idx == (rx_start_idx + num_pkts))) + break; + } + + pci_unmap_single(tp->pdev, map, tx_len, PCI_DMA_TODEVICE); + dev_kfree_skb(skb); + + if (tx_idx != send_idx) + goto out; + + if (rx_idx != rx_start_idx + num_pkts) + goto out; + + desc = &tp->rx_rcb[rx_start_idx]; + desc_idx = desc->opaque & RXD_OPAQUE_INDEX_MASK; + opaque_key = desc->opaque & RXD_OPAQUE_RING_MASK; + if (opaque_key != RXD_OPAQUE_RING_STD) + goto out; + + if ((desc->err_vlan & RXD_ERR_MASK) != 0 && + (desc->err_vlan != RXD_ERR_ODD_NIBBLE_RCVD_MII)) + goto out; + + rx_len = ((desc->idx_len & RXD_LEN_MASK) >> RXD_LEN_SHIFT) - 4; + if (rx_len != tx_len) + goto out; + + rx_skb = tp->rx_std_buffers[desc_idx].skb; + + map = pci_unmap_addr(&tp->rx_std_buffers[desc_idx], mapping); + pci_dma_sync_single_for_cpu(tp->pdev, map, rx_len, PCI_DMA_FROMDEVICE); + + for (i = 14; i < tx_len; i++) { + if (*(rx_skb->data + i) != (u8) (i & 0xff)) + goto out; + } + err = 0; + + /* tg3_free_rings will unmap and free the rx_skb */ +out: + return err; +} + +static void tg3_self_test(struct net_device *dev, struct ethtool_test *etest, + u64 *data) +{ + struct tg3 *tp = netdev_priv(dev); + + memset(data, 0, sizeof(u64) * TG3_NUM_TEST); + + if (tg3_test_nvram(tp) != 0) { + etest->flags |= ETH_TEST_FL_FAILED; + data[0] = 1; + } + if (tg3_test_link(tp) != 0) { + etest->flags |= ETH_TEST_FL_FAILED; + data[1] = 1; + } + if (etest->flags & ETH_TEST_FL_OFFLINE) { + if (netif_running(dev)) + tg3_netif_stop(tp); + + spin_lock_irq(&tp->lock); + spin_lock(&tp->tx_lock); + + tg3_halt(tp, RESET_KIND_SUSPEND, 1); + tg3_nvram_lock(tp); + tg3_halt_cpu(tp, RX_CPU_BASE); + if (!(tp->tg3_flags2 & TG3_FLG2_5705_PLUS)) + tg3_halt_cpu(tp, TX_CPU_BASE); + tg3_nvram_unlock(tp); + + if (tg3_test_registers(tp) != 0) { + etest->flags |= ETH_TEST_FL_FAILED; + data[2] = 1; + } + if (tg3_test_memory(tp) != 0) { + etest->flags |= ETH_TEST_FL_FAILED; + data[3] = 1; + } + if (tg3_test_loopback(tp) != 0) { + etest->flags |= ETH_TEST_FL_FAILED; + data[4] = 1; + } + + spin_unlock(&tp->tx_lock); + spin_unlock_irq(&tp->lock); + if (tg3_test_interrupt(tp) != 0) { + etest->flags |= ETH_TEST_FL_FAILED; + data[5] = 1; + } + spin_lock_irq(&tp->lock); + spin_lock(&tp->tx_lock); + + tg3_halt(tp, RESET_KIND_SHUTDOWN, 1); + if (netif_running(dev)) { + tp->tg3_flags |= TG3_FLAG_INIT_COMPLETE; + tg3_init_hw(tp); + tg3_netif_start(tp); + } + spin_unlock(&tp->tx_lock); + spin_unlock_irq(&tp->lock); + } +} + static int tg3_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd) { struct mii_ioctl_data *data = if_mii(ifr); @@ -7331,6 +7870,8 @@ static struct ethtool_ops tg3_ethtool_ops = { .get_tso = ethtool_op_get_tso, .set_tso = tg3_set_tso, #endif + .self_test_count = tg3_get_test_count, + .self_test = tg3_self_test, .get_strings = tg3_get_strings, .get_stats_count = tg3_get_stats_count, .get_ethtool_stats = tg3_get_ethtool_stats, @@ -9478,7 +10019,7 @@ static int __devinit tg3_init_one(struct pci_dev *pdev, (tr32(WDMAC_MODE) & WDMAC_MODE_ENABLE)) { pci_save_state(tp->pdev); tw32(MEMARB_MODE, MEMARB_MODE_ENABLE); - tg3_halt(tp, 1); + tg3_halt(tp, RESET_KIND_SHUTDOWN, 1); } err = tg3_test_dma(tp); @@ -9605,7 +10146,7 @@ static int tg3_suspend(struct pci_dev *pdev, pm_message_t state) spin_lock_irq(&tp->lock); spin_lock(&tp->tx_lock); - tg3_halt(tp, 1); + tg3_halt(tp, RESET_KIND_SHUTDOWN, 1); spin_unlock(&tp->tx_lock); spin_unlock_irq(&tp->lock); diff --git a/drivers/pci/hotplug/cpci_hotplug_core.c b/drivers/pci/hotplug/cpci_hotplug_core.c index 9e9dab7fe86..8132d946c38 100644 --- a/drivers/pci/hotplug/cpci_hotplug_core.c +++ b/drivers/pci/hotplug/cpci_hotplug_core.c @@ -1,7 +1,7 @@ /* * CompactPCI Hot Plug Driver * - * Copyright (C) 2002 SOMA Networks, Inc. + * Copyright (C) 2002,2005 SOMA Networks, Inc. * Copyright (C) 2001 Greg Kroah-Hartman (greg@kroah.com) * Copyright (C) 2001 IBM Corp. * @@ -45,10 +45,10 @@ #define dbg(format, arg...) \ do { \ - if(cpci_debug) \ + if (cpci_debug) \ printk (KERN_DEBUG "%s: " format "\n", \ MY_NAME , ## arg); \ - } while(0) + } while (0) #define err(format, arg...) printk(KERN_ERR "%s: " format "\n", MY_NAME , ## arg) #define info(format, arg...) printk(KERN_INFO "%s: " format "\n", MY_NAME , ## arg) #define warn(format, arg...) printk(KERN_WARNING "%s: " format "\n", MY_NAME , ## arg) @@ -111,10 +111,8 @@ enable_slot(struct hotplug_slot *hotplug_slot) dbg("%s - physical_slot = %s", __FUNCTION__, hotplug_slot->name); - if(controller->ops->set_power) { + if (controller->ops->set_power) retval = controller->ops->set_power(slot, 1); - } - return retval; } @@ -126,37 +124,41 @@ disable_slot(struct hotplug_slot *hotplug_slot) dbg("%s - physical_slot = %s", __FUNCTION__, hotplug_slot->name); + down_write(&list_rwsem); + /* Unconfigure device */ dbg("%s - unconfiguring slot %s", __FUNCTION__, slot->hotplug_slot->name); - if((retval = cpci_unconfigure_slot(slot))) { + if ((retval = cpci_unconfigure_slot(slot))) { err("%s - could not unconfigure slot %s", __FUNCTION__, slot->hotplug_slot->name); - return retval; + goto disable_error; } dbg("%s - finished unconfiguring slot %s", __FUNCTION__, slot->hotplug_slot->name); /* Clear EXT (by setting it) */ - if(cpci_clear_ext(slot)) { + if (cpci_clear_ext(slot)) { err("%s - could not clear EXT for slot %s", __FUNCTION__, slot->hotplug_slot->name); retval = -ENODEV; + goto disable_error; } cpci_led_on(slot); - if(controller->ops->set_power) { - retval = controller->ops->set_power(slot, 0); - } + if (controller->ops->set_power) + if ((retval = controller->ops->set_power(slot, 0))) + goto disable_error; - if(update_adapter_status(slot->hotplug_slot, 0)) { + if (update_adapter_status(slot->hotplug_slot, 0)) warn("failure to update adapter file"); - } - if(slot->extracting) { + if (slot->extracting) { slot->extracting = 0; atomic_dec(&extracting); } +disable_error: + up_write(&list_rwsem); return retval; } @@ -165,9 +167,8 @@ cpci_get_power_status(struct slot *slot) { u8 power = 1; - if(controller->ops->get_power) { + if (controller->ops->get_power) power = controller->ops->get_power(slot); - } return power; } @@ -237,9 +238,8 @@ cpci_hp_register_bus(struct pci_bus *bus, u8 first, u8 last) int status = -ENOMEM; int i; - if(!(controller && bus)) { + if (!(controller && bus)) return -ENODEV; - } /* * Create a structure for each slot, and register that slot @@ -316,32 +316,30 @@ int cpci_hp_unregister_bus(struct pci_bus *bus) { struct slot *slot; - struct list_head *tmp; - struct list_head *next; - int status; + struct slot *tmp; + int status = 0; down_write(&list_rwsem); - if(!slots) { + if (!slots) { up_write(&list_rwsem); return -1; } - list_for_each_safe(tmp, next, &slot_list) { - slot = list_entry(tmp, struct slot, slot_list); - if(slot->bus == bus) { + list_for_each_entry_safe(slot, tmp, &slot_list, slot_list) { + if (slot->bus == bus) { + list_del(&slot->slot_list); + slots--; + dbg("deregistering slot %s", slot->hotplug_slot->name); status = pci_hp_deregister(slot->hotplug_slot); - if(status) { + if (status) { err("pci_hp_deregister failed with error %d", status); - return status; + break; } - - list_del(&slot->slot_list); - slots--; } } up_write(&list_rwsem); - return 0; + return status; } /* This is the interrupt mode interrupt handler */ @@ -351,7 +349,7 @@ cpci_hp_intr(int irq, void *data, struct pt_regs *regs) dbg("entered cpci_hp_intr"); /* Check to see if it was our interrupt */ - if((controller->irq_flags & SA_SHIRQ) && + if ((controller->irq_flags & SA_SHIRQ) && !controller->ops->check_irq(controller->dev_id)) { dbg("exited cpci_hp_intr, not our interrupt"); return IRQ_NONE; @@ -373,38 +371,30 @@ cpci_hp_intr(int irq, void *data, struct pt_regs *regs) * INS bits of the cold-inserted devices. */ static int -init_slots(void) +init_slots(int clear_ins) { struct slot *slot; - struct list_head *tmp; struct pci_dev* dev; dbg("%s - enter", __FUNCTION__); down_read(&list_rwsem); - if(!slots) { + if (!slots) { up_read(&list_rwsem); return -1; } - list_for_each(tmp, &slot_list) { - slot = list_entry(tmp, struct slot, slot_list); + list_for_each_entry(slot, &slot_list, slot_list) { dbg("%s - looking at slot %s", __FUNCTION__, slot->hotplug_slot->name); - if(cpci_check_and_clear_ins(slot)) { + if (clear_ins && cpci_check_and_clear_ins(slot)) dbg("%s - cleared INS for slot %s", __FUNCTION__, slot->hotplug_slot->name); - dev = pci_find_slot(slot->bus->number, PCI_DEVFN(slot->number, 0)); - if(dev) { - if(update_adapter_status(slot->hotplug_slot, 1)) { - warn("failure to update adapter file"); - } - if(update_latch_status(slot->hotplug_slot, 1)) { - warn("failure to update latch file"); - } - slot->dev = dev; - } else { - err("%s - no driver attached to device in slot %s", - __FUNCTION__, slot->hotplug_slot->name); - } + dev = pci_get_slot(slot->bus, PCI_DEVFN(slot->number, 0)); + if (dev) { + if (update_adapter_status(slot->hotplug_slot, 1)) + warn("failure to update adapter file"); + if (update_latch_status(slot->hotplug_slot, 1)) + warn("failure to update latch file"); + slot->dev = dev; } } up_read(&list_rwsem); @@ -416,26 +406,28 @@ static int check_slots(void) { struct slot *slot; - struct list_head *tmp; int extracted; int inserted; u16 hs_csr; down_read(&list_rwsem); - if(!slots) { + if (!slots) { up_read(&list_rwsem); err("no slots registered, shutting down"); return -1; } extracted = inserted = 0; - list_for_each(tmp, &slot_list) { - slot = list_entry(tmp, struct slot, slot_list); + list_for_each_entry(slot, &slot_list, slot_list) { dbg("%s - looking at slot %s", __FUNCTION__, slot->hotplug_slot->name); - if(cpci_check_and_clear_ins(slot)) { - /* Some broken hardware (e.g. PLX 9054AB) asserts ENUM# twice... */ - if(slot->dev) { - warn("slot %s already inserted", slot->hotplug_slot->name); + if (cpci_check_and_clear_ins(slot)) { + /* + * Some broken hardware (e.g. PLX 9054AB) asserts + * ENUM# twice... + */ + if (slot->dev) { + warn("slot %s already inserted", + slot->hotplug_slot->name); inserted++; continue; } @@ -452,7 +444,7 @@ check_slots(void) /* Configure device */ dbg("%s - configuring slot %s", __FUNCTION__, slot->hotplug_slot->name); - if(cpci_configure_slot(slot)) { + if (cpci_configure_slot(slot)) { err("%s - could not configure slot %s", __FUNCTION__, slot->hotplug_slot->name); continue; @@ -465,13 +457,11 @@ check_slots(void) dbg("%s - slot %s HS_CSR (2) = %04x", __FUNCTION__, slot->hotplug_slot->name, hs_csr); - if(update_latch_status(slot->hotplug_slot, 1)) { + if (update_latch_status(slot->hotplug_slot, 1)) warn("failure to update latch file"); - } - if(update_adapter_status(slot->hotplug_slot, 1)) { + if (update_adapter_status(slot->hotplug_slot, 1)) warn("failure to update adapter file"); - } cpci_led_off(slot); @@ -481,7 +471,7 @@ check_slots(void) __FUNCTION__, slot->hotplug_slot->name, hs_csr); inserted++; - } else if(cpci_check_ext(slot)) { + } else if (cpci_check_ext(slot)) { /* Process extraction request */ dbg("%s - slot %s extracted", __FUNCTION__, slot->hotplug_slot->name); @@ -491,27 +481,25 @@ check_slots(void) dbg("%s - slot %s HS_CSR = %04x", __FUNCTION__, slot->hotplug_slot->name, hs_csr); - if(!slot->extracting) { - if(update_latch_status(slot->hotplug_slot, 0)) { + if (!slot->extracting) { + if (update_latch_status(slot->hotplug_slot, 0)) { warn("failure to update latch file"); - } - atomic_inc(&extracting); slot->extracting = 1; + atomic_inc(&extracting); } extracted++; - } else if(slot->extracting) { + } else if (slot->extracting) { hs_csr = cpci_get_hs_csr(slot); - if(hs_csr == 0xffff) { + if (hs_csr == 0xffff) { /* * Hmmm, we're likely hosed at this point, should we * bother trying to tell the driver or not? */ err("card in slot %s was improperly removed", slot->hotplug_slot->name); - if(update_adapter_status(slot->hotplug_slot, 0)) { + if (update_adapter_status(slot->hotplug_slot, 0)) warn("failure to update adapter file"); - } slot->extracting = 0; atomic_dec(&extracting); } @@ -520,10 +508,9 @@ check_slots(void) up_read(&list_rwsem); dbg("inserted=%d, extracted=%d, extracting=%d", inserted, extracted, atomic_read(&extracting)); - if(inserted || extracted) { + if (inserted || extracted) return extracted; - } - else if(!atomic_read(&extracting)) { + else if (!atomic_read(&extracting)) { err("cannot find ENUM# source, shutting down"); return -1; } @@ -541,12 +528,12 @@ event_thread(void *data) unlock_kernel(); dbg("%s - event thread started", __FUNCTION__); - while(1) { + while (1) { dbg("event thread sleeping"); down_interruptible(&event_semaphore); dbg("event thread woken, thread_finished = %d", thread_finished); - if(thread_finished || signal_pending(current)) + if (thread_finished || signal_pending(current)) break; do { rc = check_slots(); @@ -558,7 +545,9 @@ event_thread(void *data) thread_finished = 1; break; } - } while(atomic_read(&extracting) != 0); + } while (atomic_read(&extracting) && !thread_finished); + if (thread_finished) + break; /* Re-enable ENUM# interrupt */ dbg("%s - re-enabling irq", __FUNCTION__); @@ -579,21 +568,21 @@ poll_thread(void *data) daemonize("cpci_hp_polld"); unlock_kernel(); - while(1) { - if(thread_finished || signal_pending(current)) + while (1) { + if (thread_finished || signal_pending(current)) break; - if(controller->ops->query_enum()) { + if (controller->ops->query_enum()) { do { rc = check_slots(); - if(rc > 0) { + if (rc > 0) { /* Give userspace a chance to handle extraction */ msleep(500); - } else if(rc < 0) { + } else if (rc < 0) { dbg("%s - error checking slots", __FUNCTION__); thread_finished = 1; break; } - } while(atomic_read(&extracting) != 0); + } while (atomic_read(&extracting) && !thread_finished); } msleep(100); } @@ -612,12 +601,11 @@ cpci_start_thread(void) init_MUTEX_LOCKED(&thread_exit); thread_finished = 0; - if(controller->irq) { + if (controller->irq) pid = kernel_thread(event_thread, NULL, 0); - } else { + else pid = kernel_thread(poll_thread, NULL, 0); - } - if(pid < 0) { + if (pid < 0) { err("Can't start up our thread"); return -1; } @@ -630,9 +618,8 @@ cpci_stop_thread(void) { thread_finished = 1; dbg("thread finish command given"); - if(controller->irq) { + if (controller->irq) up(&event_semaphore); - } dbg("wait for thread to exit"); down(&thread_exit); } @@ -642,45 +629,67 @@ cpci_hp_register_controller(struct cpci_hp_controller *new_controller) { int status = 0; - if(!controller) { - controller = new_controller; - if(controller->irq) { - if(request_irq(controller->irq, - cpci_hp_intr, - controller->irq_flags, - MY_NAME, controller->dev_id)) { - err("Can't get irq %d for the hotplug cPCI controller", controller->irq); - status = -ENODEV; - } - dbg("%s - acquired controller irq %d", __FUNCTION__, - controller->irq); + if (controller) + return -1; + if (!(new_controller && new_controller->ops)) + return -EINVAL; + if (new_controller->irq) { + if (!(new_controller->ops->enable_irq && + new_controller->ops->disable_irq)) + status = -EINVAL; + if (request_irq(new_controller->irq, + cpci_hp_intr, + new_controller->irq_flags, + MY_NAME, + new_controller->dev_id)) { + err("Can't get irq %d for the hotplug cPCI controller", + new_controller->irq); + status = -ENODEV; } - } else { - err("cPCI hotplug controller already registered"); - status = -1; + dbg("%s - acquired controller irq %d", + __FUNCTION__, new_controller->irq); } + if (!status) + controller = new_controller; return status; } +static void +cleanup_slots(void) +{ + struct slot *slot; + struct slot *tmp; + + /* + * Unregister all of our slots with the pci_hotplug subsystem, + * and free up all memory that we had allocated. + */ + down_write(&list_rwsem); + if (!slots) + goto cleanup_null; + list_for_each_entry_safe(slot, tmp, &slot_list, slot_list) { + list_del(&slot->slot_list); + pci_hp_deregister(slot->hotplug_slot); + } +cleanup_null: + up_write(&list_rwsem); + return; +} + int cpci_hp_unregister_controller(struct cpci_hp_controller *old_controller) { int status = 0; - if(controller) { - if(atomic_read(&extracting) != 0) { - return -EBUSY; - } - if(!thread_finished) { + if (controller) { + if (!thread_finished) cpci_stop_thread(); - } - if(controller->irq) { + if (controller->irq) free_irq(controller->irq, controller->dev_id); - } controller = NULL; - } else { + cleanup_slots(); + } else status = -ENODEV; - } return status; } @@ -691,32 +700,28 @@ cpci_hp_start(void) int status; dbg("%s - enter", __FUNCTION__); - if(!controller) { + if (!controller) return -ENODEV; - } down_read(&list_rwsem); - if(list_empty(&slot_list)) { + if (list_empty(&slot_list)) { up_read(&list_rwsem); return -ENODEV; } up_read(&list_rwsem); - if(first) { - status = init_slots(); - if(status) { - return status; - } + status = init_slots(first); + if (first) first = 0; - } + if (status) + return status; status = cpci_start_thread(); - if(status) { + if (status) return status; - } dbg("%s - thread started", __FUNCTION__); - if(controller->irq) { + if (controller->irq) { /* Start enum interrupt processing */ dbg("%s - enabling irq", __FUNCTION__); controller->ops->enable_irq(); @@ -728,13 +733,9 @@ cpci_hp_start(void) int cpci_hp_stop(void) { - if(!controller) { + if (!controller) return -ENODEV; - } - if(atomic_read(&extracting) != 0) { - return -EBUSY; - } - if(controller->irq) { + if (controller->irq) { /* Stop enum interrupt processing */ dbg("%s - disabling irq", __FUNCTION__); controller->ops->disable_irq(); @@ -743,34 +744,6 @@ cpci_hp_stop(void) return 0; } -static void __exit -cleanup_slots(void) -{ - struct list_head *tmp; - struct slot *slot; - - /* - * Unregister all of our slots with the pci_hotplug subsystem, - * and free up all memory that we had allocated. - */ - down_write(&list_rwsem); - if(!slots) { - goto null_cleanup; - } - list_for_each(tmp, &slot_list) { - slot = list_entry(tmp, struct slot, slot_list); - list_del(&slot->slot_list); - pci_hp_deregister(slot->hotplug_slot); - kfree(slot->hotplug_slot->info); - kfree(slot->hotplug_slot->name); - kfree(slot->hotplug_slot); - kfree(slot); - } - null_cleanup: - up_write(&list_rwsem); - return; -} - int __init cpci_hotplug_init(int debug) { @@ -784,7 +757,8 @@ cpci_hotplug_exit(void) /* * Clean everything up. */ - cleanup_slots(); + cpci_hp_stop(); + cpci_hp_unregister_controller(controller); } EXPORT_SYMBOL_GPL(cpci_hp_register_controller); diff --git a/drivers/pci/hotplug/cpci_hotplug_pci.c b/drivers/pci/hotplug/cpci_hotplug_pci.c index 69eb4fc54f2..c878028ad21 100644 --- a/drivers/pci/hotplug/cpci_hotplug_pci.c +++ b/drivers/pci/hotplug/cpci_hotplug_pci.c @@ -1,7 +1,7 @@ /* * CompactPCI Hot Plug Driver PCI functions * - * Copyright (C) 2002 by SOMA Networks, Inc. + * Copyright (C) 2002,2005 by SOMA Networks, Inc. * * All rights reserved. * @@ -38,10 +38,10 @@ extern int cpci_debug; #define dbg(format, arg...) \ do { \ - if(cpci_debug) \ + if (cpci_debug) \ printk (KERN_DEBUG "%s: " format "\n", \ MY_NAME , ## arg); \ - } while(0) + } while (0) #define err(format, arg...) printk(KERN_ERR "%s: " format "\n", MY_NAME , ## arg) #define info(format, arg...) printk(KERN_INFO "%s: " format "\n", MY_NAME , ## arg) #define warn(format, arg...) printk(KERN_WARNING "%s: " format "\n", MY_NAME , ## arg) @@ -57,16 +57,15 @@ u8 cpci_get_attention_status(struct slot* slot) hs_cap = pci_bus_find_capability(slot->bus, slot->devfn, PCI_CAP_ID_CHSWP); - if(!hs_cap) { + if (!hs_cap) return 0; - } - if(pci_bus_read_config_word(slot->bus, + if (pci_bus_read_config_word(slot->bus, slot->devfn, hs_cap + 2, - &hs_csr)) { + &hs_csr)) return 0; - } + return hs_csr & 0x0008 ? 1 : 0; } @@ -78,27 +77,22 @@ int cpci_set_attention_status(struct slot* slot, int status) hs_cap = pci_bus_find_capability(slot->bus, slot->devfn, PCI_CAP_ID_CHSWP); - if(!hs_cap) { + if (!hs_cap) return 0; - } - - if(pci_bus_read_config_word(slot->bus, + if (pci_bus_read_config_word(slot->bus, slot->devfn, hs_cap + 2, - &hs_csr)) { + &hs_csr)) return 0; - } - if(status) { + if (status) hs_csr |= HS_CSR_LOO; - } else { + else hs_csr &= ~HS_CSR_LOO; - } - if(pci_bus_write_config_word(slot->bus, + if (pci_bus_write_config_word(slot->bus, slot->devfn, hs_cap + 2, - hs_csr)) { + hs_csr)) return 0; - } return 1; } @@ -110,16 +104,13 @@ u16 cpci_get_hs_csr(struct slot* slot) hs_cap = pci_bus_find_capability(slot->bus, slot->devfn, PCI_CAP_ID_CHSWP); - if(!hs_cap) { + if (!hs_cap) return 0xFFFF; - } - - if(pci_bus_read_config_word(slot->bus, + if (pci_bus_read_config_word(slot->bus, slot->devfn, hs_cap + 2, - &hs_csr)) { + &hs_csr)) return 0xFFFF; - } return hs_csr; } @@ -132,24 +123,22 @@ int cpci_check_and_clear_ins(struct slot* slot) hs_cap = pci_bus_find_capability(slot->bus, slot->devfn, PCI_CAP_ID_CHSWP); - if(!hs_cap) { + if (!hs_cap) return 0; - } - if(pci_bus_read_config_word(slot->bus, + if (pci_bus_read_config_word(slot->bus, slot->devfn, hs_cap + 2, - &hs_csr)) { + &hs_csr)) return 0; - } - if(hs_csr & HS_CSR_INS) { + if (hs_csr & HS_CSR_INS) { /* Clear INS (by setting it) */ - if(pci_bus_write_config_word(slot->bus, + if (pci_bus_write_config_word(slot->bus, slot->devfn, hs_cap + 2, - hs_csr)) { + hs_csr)) ins = 0; - } - ins = 1; + else + ins = 1; } return ins; } @@ -163,18 +152,15 @@ int cpci_check_ext(struct slot* slot) hs_cap = pci_bus_find_capability(slot->bus, slot->devfn, PCI_CAP_ID_CHSWP); - if(!hs_cap) { + if (!hs_cap) return 0; - } - if(pci_bus_read_config_word(slot->bus, + if (pci_bus_read_config_word(slot->bus, slot->devfn, hs_cap + 2, - &hs_csr)) { + &hs_csr)) return 0; - } - if(hs_csr & HS_CSR_EXT) { + if (hs_csr & HS_CSR_EXT) ext = 1; - } return ext; } @@ -186,23 +172,20 @@ int cpci_clear_ext(struct slot* slot) hs_cap = pci_bus_find_capability(slot->bus, slot->devfn, PCI_CAP_ID_CHSWP); - if(!hs_cap) { + if (!hs_cap) return -ENODEV; - } - if(pci_bus_read_config_word(slot->bus, + if (pci_bus_read_config_word(slot->bus, slot->devfn, hs_cap + 2, - &hs_csr)) { + &hs_csr)) return -ENODEV; - } - if(hs_csr & HS_CSR_EXT) { + if (hs_csr & HS_CSR_EXT) { /* Clear EXT (by setting it) */ - if(pci_bus_write_config_word(slot->bus, + if (pci_bus_write_config_word(slot->bus, slot->devfn, hs_cap + 2, - hs_csr)) { + hs_csr)) return -ENODEV; - } } return 0; } @@ -215,18 +198,16 @@ int cpci_led_on(struct slot* slot) hs_cap = pci_bus_find_capability(slot->bus, slot->devfn, PCI_CAP_ID_CHSWP); - if(!hs_cap) { + if (!hs_cap) return -ENODEV; - } - if(pci_bus_read_config_word(slot->bus, + if (pci_bus_read_config_word(slot->bus, slot->devfn, hs_cap + 2, - &hs_csr)) { + &hs_csr)) return -ENODEV; - } - if((hs_csr & HS_CSR_LOO) != HS_CSR_LOO) { + if ((hs_csr & HS_CSR_LOO) != HS_CSR_LOO) { hs_csr |= HS_CSR_LOO; - if(pci_bus_write_config_word(slot->bus, + if (pci_bus_write_config_word(slot->bus, slot->devfn, hs_cap + 2, hs_csr)) { @@ -246,18 +227,16 @@ int cpci_led_off(struct slot* slot) hs_cap = pci_bus_find_capability(slot->bus, slot->devfn, PCI_CAP_ID_CHSWP); - if(!hs_cap) { + if (!hs_cap) return -ENODEV; - } - if(pci_bus_read_config_word(slot->bus, + if (pci_bus_read_config_word(slot->bus, slot->devfn, hs_cap + 2, - &hs_csr)) { + &hs_csr)) return -ENODEV; - } - if(hs_csr & HS_CSR_LOO) { + if (hs_csr & HS_CSR_LOO) { hs_csr &= ~HS_CSR_LOO; - if(pci_bus_write_config_word(slot->bus, + if (pci_bus_write_config_word(slot->bus, slot->devfn, hs_cap + 2, hs_csr)) { @@ -274,19 +253,6 @@ int cpci_led_off(struct slot* slot) * Device configuration functions */ -static void cpci_enable_device(struct pci_dev *dev) -{ - struct pci_bus *bus; - - pci_enable_device(dev); - if(dev->hdr_type == PCI_HEADER_TYPE_BRIDGE) { - bus = dev->subordinate; - list_for_each_entry(dev, &bus->devices, bus_list) { - cpci_enable_device(dev); - } - } -} - int cpci_configure_slot(struct slot* slot) { unsigned char busnr; @@ -294,14 +260,14 @@ int cpci_configure_slot(struct slot* slot) dbg("%s - enter", __FUNCTION__); - if(slot->dev == NULL) { + if (slot->dev == NULL) { dbg("pci_dev null, finding %02x:%02x:%x", slot->bus->number, PCI_SLOT(slot->devfn), PCI_FUNC(slot->devfn)); - slot->dev = pci_find_slot(slot->bus->number, slot->devfn); + slot->dev = pci_get_slot(slot->bus, slot->devfn); } /* Still NULL? Well then scan for it! */ - if(slot->dev == NULL) { + if (slot->dev == NULL) { int n; dbg("pci_dev still null"); @@ -311,10 +277,10 @@ int cpci_configure_slot(struct slot* slot) */ n = pci_scan_slot(slot->bus, slot->devfn); dbg("%s: pci_scan_slot returned %d", __FUNCTION__, n); - if(n > 0) + if (n > 0) pci_bus_add_devices(slot->bus); - slot->dev = pci_find_slot(slot->bus->number, slot->devfn); - if(slot->dev == NULL) { + slot->dev = pci_get_slot(slot->bus, slot->devfn); + if (slot->dev == NULL) { err("Could not find PCI device for slot %02x", slot->number); return 1; } @@ -329,8 +295,6 @@ int cpci_configure_slot(struct slot* slot) pci_bus_assign_resources(slot->dev->bus); - cpci_enable_device(slot->dev); - dbg("%s - exit", __FUNCTION__); return 0; } @@ -341,15 +305,15 @@ int cpci_unconfigure_slot(struct slot* slot) struct pci_dev *dev; dbg("%s - enter", __FUNCTION__); - if(!slot->dev) { + if (!slot->dev) { err("No device for slot %02x\n", slot->number); return -ENODEV; } for (i = 0; i < 8; i++) { - dev = pci_find_slot(slot->bus->number, + dev = pci_get_slot(slot->bus, PCI_DEVFN(PCI_SLOT(slot->devfn), i)); - if(dev) { + if (dev) { pci_remove_bus_device(dev); slot->dev = NULL; } diff --git a/drivers/pci/hotplug/shpchprm_acpi.c b/drivers/pci/hotplug/shpchprm_acpi.c index 243a51d88b8..7957cdc72cd 100644 --- a/drivers/pci/hotplug/shpchprm_acpi.c +++ b/drivers/pci/hotplug/shpchprm_acpi.c @@ -1626,7 +1626,7 @@ int shpchprm_set_hpp( pci_bus->number = func->bus; devfn = PCI_DEVFN(func->device, func->function); - ab = find_acpi_bridge_by_bus(acpi_bridges_head, ctrl->seg, ctrl->bus); + ab = find_acpi_bridge_by_bus(acpi_bridges_head, ctrl->seg, ctrl->slot_bus); if (ab) { if (ab->_hpp) { @@ -1681,7 +1681,7 @@ void shpchprm_enable_card( | PCI_COMMAND_IO | PCI_COMMAND_MEMORY; bcmd = bcommand = bcommand | PCI_BRIDGE_CTL_NO_ISA; - ab = find_acpi_bridge_by_bus(acpi_bridges_head, ctrl->seg, ctrl->bus); + ab = find_acpi_bridge_by_bus(acpi_bridges_head, ctrl->seg, ctrl->slot_bus); if (ab) { if (ab->_hpp) { if (ab->_hpp->enable_perr) { diff --git a/drivers/scsi/ahci.c b/drivers/scsi/ahci.c index da5bd33d982..fc5263c6b10 100644 --- a/drivers/scsi/ahci.c +++ b/drivers/scsi/ahci.c @@ -32,6 +32,7 @@ #include <linux/delay.h> #include <linux/interrupt.h> #include <linux/sched.h> +#include <linux/dma-mapping.h> #include "scsi.h" #include <scsi/scsi_host.h> #include <linux/libata.h> @@ -289,6 +290,8 @@ static void ahci_host_stop(struct ata_host_set *host_set) { struct ahci_host_priv *hpriv = host_set->private_data; kfree(hpriv); + + ata_host_stop(host_set); } static int ahci_port_start(struct ata_port *ap) diff --git a/drivers/scsi/aic7xxx/aic79xx_osm.c b/drivers/scsi/aic7xxx/aic79xx_osm.c index 550c9921691..7c02b7dc709 100644 --- a/drivers/scsi/aic7xxx/aic79xx_osm.c +++ b/drivers/scsi/aic7xxx/aic79xx_osm.c @@ -2488,7 +2488,7 @@ ahd_linux_dv_thread(void *data) sprintf(current->comm, "ahd_dv_%d", ahd->unit); #else daemonize("ahd_dv_%d", ahd->unit); - current->flags |= PF_FREEZE; + current->flags |= PF_NOFREEZE; #endif unlock_kernel(); diff --git a/drivers/scsi/ata_piix.c b/drivers/scsi/ata_piix.c index c2b00c9d40a..3be54643925 100644 --- a/drivers/scsi/ata_piix.c +++ b/drivers/scsi/ata_piix.c @@ -153,6 +153,7 @@ static struct ata_port_operations piix_pata_ops = { .port_start = ata_port_start, .port_stop = ata_port_stop, + .host_stop = ata_host_stop, }; static struct ata_port_operations piix_sata_ops = { @@ -180,6 +181,7 @@ static struct ata_port_operations piix_sata_ops = { .port_start = ata_port_start, .port_stop = ata_port_stop, + .host_stop = ata_host_stop, }; static struct ata_port_info piix_port_info[] = { diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index a5d7c33a434..21d194c6ace 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -3666,6 +3666,13 @@ void ata_port_stop (struct ata_port *ap) dma_free_coherent(dev, ATA_PRD_TBL_SZ, ap->prd, ap->prd_dma); } +void ata_host_stop (struct ata_host_set *host_set) +{ + if (host_set->mmio_base) + iounmap(host_set->mmio_base); +} + + /** * ata_host_remove - Unregister SCSI host structure with upper layers * @ap: Port to unregister @@ -4271,10 +4278,6 @@ void ata_pci_remove_one (struct pci_dev *pdev) } free_irq(host_set->irq, host_set); - if (host_set->ops->host_stop) - host_set->ops->host_stop(host_set); - if (host_set->mmio_base) - iounmap(host_set->mmio_base); for (i = 0; i < host_set->n_ports; i++) { ap = host_set->ports[i]; @@ -4293,6 +4296,9 @@ void ata_pci_remove_one (struct pci_dev *pdev) scsi_host_put(ap->host); } + if (host_set->ops->host_stop) + host_set->ops->host_stop(host_set); + kfree(host_set); pci_release_regions(pdev); @@ -4381,6 +4387,7 @@ EXPORT_SYMBOL_GPL(ata_chk_err); EXPORT_SYMBOL_GPL(ata_exec_command); EXPORT_SYMBOL_GPL(ata_port_start); EXPORT_SYMBOL_GPL(ata_port_stop); +EXPORT_SYMBOL_GPL(ata_host_stop); EXPORT_SYMBOL_GPL(ata_interrupt); EXPORT_SYMBOL_GPL(ata_qc_prep); EXPORT_SYMBOL_GPL(ata_bmdma_setup); diff --git a/drivers/scsi/libata.h b/drivers/scsi/libata.h index 6518226b8f8..d90430bbb0d 100644 --- a/drivers/scsi/libata.h +++ b/drivers/scsi/libata.h @@ -26,7 +26,7 @@ #define __LIBATA_H__ #define DRV_NAME "libata" -#define DRV_VERSION "1.10" /* must be exactly four chars */ +#define DRV_VERSION "1.11" /* must be exactly four chars */ struct ata_scsi_args { u16 *id; diff --git a/drivers/scsi/sata_nv.c b/drivers/scsi/sata_nv.c index 69009f853a4..b0403ccd8a2 100644 --- a/drivers/scsi/sata_nv.c +++ b/drivers/scsi/sata_nv.c @@ -329,6 +329,8 @@ static void nv_host_stop (struct ata_host_set *host_set) host->host_desc->disable_hotplug(host_set); kfree(host); + + ata_host_stop(host_set); } static int nv_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) diff --git a/drivers/scsi/sata_promise.c b/drivers/scsi/sata_promise.c index c4e9e029812..b18c90582e6 100644 --- a/drivers/scsi/sata_promise.c +++ b/drivers/scsi/sata_promise.c @@ -122,6 +122,7 @@ static struct ata_port_operations pdc_ata_ops = { .scr_write = pdc_sata_scr_write, .port_start = pdc_port_start, .port_stop = pdc_port_stop, + .host_stop = ata_host_stop, }; static struct ata_port_info pdc_port_info[] = { diff --git a/drivers/scsi/sata_qstor.c b/drivers/scsi/sata_qstor.c index dfd36210471..1383e8a28d7 100644 --- a/drivers/scsi/sata_qstor.c +++ b/drivers/scsi/sata_qstor.c @@ -536,6 +536,8 @@ static void qs_host_stop(struct ata_host_set *host_set) writeb(0, mmio_base + QS_HCT_CTRL); /* disable host interrupts */ writeb(QS_CNFG3_GSRST, mmio_base + QS_HCF_CNFG3); /* global reset */ + + ata_host_stop(host_set); } static void qs_host_init(unsigned int chip_id, struct ata_probe_ent *pe) diff --git a/drivers/scsi/sata_sil.c b/drivers/scsi/sata_sil.c index 2b2ff48be39..238580d244e 100644 --- a/drivers/scsi/sata_sil.c +++ b/drivers/scsi/sata_sil.c @@ -161,6 +161,7 @@ static struct ata_port_operations sil_ops = { .scr_write = sil_scr_write, .port_start = ata_port_start, .port_stop = ata_port_stop, + .host_stop = ata_host_stop, }; static struct ata_port_info sil_port_info[] = { diff --git a/drivers/scsi/sata_sis.c b/drivers/scsi/sata_sis.c index 5105ddd0844..e418b89c6b9 100644 --- a/drivers/scsi/sata_sis.c +++ b/drivers/scsi/sata_sis.c @@ -114,6 +114,7 @@ static struct ata_port_operations sis_ops = { .scr_write = sis_scr_write, .port_start = ata_port_start, .port_stop = ata_port_stop, + .host_stop = ata_host_stop, }; static struct ata_port_info sis_port_info = { diff --git a/drivers/scsi/sata_svw.c b/drivers/scsi/sata_svw.c index 05075bd3a89..edef1fa969f 100644 --- a/drivers/scsi/sata_svw.c +++ b/drivers/scsi/sata_svw.c @@ -313,6 +313,7 @@ static struct ata_port_operations k2_sata_ops = { .scr_write = k2_sata_scr_write, .port_start = ata_port_start, .port_stop = ata_port_stop, + .host_stop = ata_host_stop, }; static void k2_sata_setup_port(struct ata_ioports *port, unsigned long base) diff --git a/drivers/scsi/sata_sx4.c b/drivers/scsi/sata_sx4.c index 70118650c46..140cea05de3 100644 --- a/drivers/scsi/sata_sx4.c +++ b/drivers/scsi/sata_sx4.c @@ -245,6 +245,8 @@ static void pdc20621_host_stop(struct ata_host_set *host_set) iounmap(dimm_mmio); kfree(hpriv); + + ata_host_stop(host_set); } static int pdc_port_start(struct ata_port *ap) diff --git a/drivers/scsi/sata_uli.c b/drivers/scsi/sata_uli.c index 0bff4f475f2..a71fb54eebd 100644 --- a/drivers/scsi/sata_uli.c +++ b/drivers/scsi/sata_uli.c @@ -113,6 +113,7 @@ static struct ata_port_operations uli_ops = { .port_start = ata_port_start, .port_stop = ata_port_stop, + .host_stop = ata_host_stop, }; static struct ata_port_info uli_port_info = { diff --git a/drivers/scsi/sata_via.c b/drivers/scsi/sata_via.c index 3a783066727..f43183c19a1 100644 --- a/drivers/scsi/sata_via.c +++ b/drivers/scsi/sata_via.c @@ -134,6 +134,7 @@ static struct ata_port_operations svia_sata_ops = { .port_start = ata_port_start, .port_stop = ata_port_stop, + .host_stop = ata_host_stop, }; static struct ata_port_info svia_port_info = { diff --git a/drivers/scsi/sata_vsc.c b/drivers/scsi/sata_vsc.c index 2c28f0ad73c..c5e09dc6f3d 100644 --- a/drivers/scsi/sata_vsc.c +++ b/drivers/scsi/sata_vsc.c @@ -21,6 +21,7 @@ #include <linux/blkdev.h> #include <linux/delay.h> #include <linux/interrupt.h> +#include <linux/dma-mapping.h> #include "scsi.h" #include <scsi/scsi_host.h> #include <linux/libata.h> @@ -230,6 +231,7 @@ static struct ata_port_operations vsc_sata_ops = { .scr_write = vsc_sata_scr_write, .port_start = ata_port_start, .port_stop = ata_port_stop, + .host_stop = ata_host_stop, }; static void __devinit vsc_sata_setup_port(struct ata_ioports *port, unsigned long base) diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig index 3196c3265ff..19e598c9641 100644 --- a/drivers/usb/host/Kconfig +++ b/drivers/usb/host/Kconfig @@ -124,3 +124,14 @@ config USB_SL811_HCD To compile this driver as a module, choose M here: the module will be called sl811-hcd. +config USB_SL811_CS + tristate "CF/PCMCIA support for SL811HS HCD" + depends on USB_SL811_HCD && PCMCIA + default N + help + Wraps a PCMCIA driver around the SL811HS HCD, supporting the RATOC + REX-CFU1U CF card (often used with PDAs). If unsure, say N. + + To compile this driver as a module, choose M here: the + module will be called "sl811_cs". + diff --git a/drivers/usb/host/Makefile b/drivers/usb/host/Makefile index a574ca06cf6..5dbd3e7a27c 100644 --- a/drivers/usb/host/Makefile +++ b/drivers/usb/host/Makefile @@ -7,4 +7,5 @@ obj-$(CONFIG_USB_EHCI_HCD) += ehci-hcd.o obj-$(CONFIG_USB_OHCI_HCD) += ohci-hcd.o obj-$(CONFIG_USB_UHCI_HCD) += uhci-hcd.o obj-$(CONFIG_USB_SL811_HCD) += sl811-hcd.o +obj-$(CONFIG_USB_SL811_CS) += sl811_cs.o obj-$(CONFIG_ETRAX_ARCH_V10) += hc_crisv10.o diff --git a/drivers/usb/host/sl811-hcd.c b/drivers/usb/host/sl811-hcd.c index a374b769207..99d43f758ad 100644 --- a/drivers/usb/host/sl811-hcd.c +++ b/drivers/usb/host/sl811-hcd.c @@ -2,8 +2,8 @@ * SL811HS HCD (Host Controller Driver) for USB. * * Copyright (C) 2004 Psion Teklogix (for NetBook PRO) - * Copyright (C) 2004 David Brownell - * + * Copyright (C) 2004-2005 David Brownell + * * Periodic scheduling is based on Roman's OHCI code * Copyright (C) 1999 Roman Weissgaerber * @@ -15,7 +15,7 @@ * For documentation, see the SL811HS spec and the "SL811HS Embedded Host" * document (providing significant pieces missing from that spec); plus * the SL811S spec if you want peripheral side info. - */ + */ /* * Status: Passed basic stress testing, works with hubs, mice, keyboards, @@ -67,7 +67,7 @@ MODULE_DESCRIPTION("SL811HS USB Host Controller Driver"); MODULE_LICENSE("GPL"); -#define DRIVER_VERSION "15 Dec 2004" +#define DRIVER_VERSION "19 May 2005" #ifndef DEBUG @@ -121,6 +121,10 @@ static void port_power(struct sl811 *sl811, int is_on) /* reset as thoroughly as we can */ if (sl811->board && sl811->board->reset) sl811->board->reset(hcd->self.controller); + else { + sl811_write(sl811, SL11H_CTLREG1, SL11H_CTL1MASK_SE0); + mdelay(20); + } sl811_write(sl811, SL11H_IRQ_ENABLE, 0); sl811_write(sl811, SL11H_CTLREG1, sl811->ctrl1); @@ -443,6 +447,7 @@ static void finish_request( spin_lock(&urb->lock); if (urb->status == -EINPROGRESS) urb->status = status; + urb->hcpriv = NULL; spin_unlock(&urb->lock); spin_unlock(&sl811->lock); @@ -472,7 +477,7 @@ static void finish_request( if (*prev) *prev = ep->next; sl811->load[i] -= ep->load; - } + } ep->branch = PERIODIC_SIZE; sl811->periodic_count--; sl811_to_hcd(sl811)->self.bandwidth_allocated @@ -661,9 +666,9 @@ retry: #ifdef QUIRK2 /* this may no longer be necessary ... */ - if (irqstat == 0 && ret == IRQ_NONE) { + if (irqstat == 0) { irqstat = checkdone(sl811); - if (irqstat /* && irq != ~0 */ ) + if (irqstat) sl811->stat_lost++; } #endif @@ -722,7 +727,8 @@ retry: if (sl811->active_a) { sl811_write(sl811, SL811_EP_A(SL11H_HOSTCTLREG), 0); finish_request(sl811, sl811->active_a, - container_of(sl811->active_a->hep->urb_list.next, + container_of(sl811->active_a + ->hep->urb_list.next, struct urb, urb_list), NULL, -ESHUTDOWN); sl811->active_a = NULL; @@ -731,7 +737,8 @@ retry: if (sl811->active_b) { sl811_write(sl811, SL811_EP_B(SL11H_HOSTCTLREG), 0); finish_request(sl811, sl811->active_b, - container_of(sl811->active_b->hep->urb_list.next, + container_of(sl811->active_b + ->hep->urb_list.next, struct urb, urb_list), NULL, -ESHUTDOWN); sl811->active_b = NULL; @@ -761,7 +768,7 @@ retry: goto retry; } - if (sl811->periodic_count == 0 && list_empty(&sl811->async)) + if (sl811->periodic_count == 0 && list_empty(&sl811->async)) sofirq_off(sl811); sl811_write(sl811, SL11H_IRQ_ENABLE, sl811->irq_enable); @@ -796,7 +803,7 @@ static int balance(struct sl811 *sl811, u16 period, u16 load) } if (j < PERIODIC_SIZE) continue; - branch = i; + branch = i; } } return branch; @@ -890,6 +897,7 @@ static int sl811h_urb_enqueue( break; } + ep->hep = hep; hep->hcpriv = ep; } @@ -961,15 +969,16 @@ fail: static int sl811h_urb_dequeue(struct usb_hcd *hcd, struct urb *urb) { struct sl811 *sl811 = hcd_to_sl811(hcd); - struct usb_host_endpoint *hep = urb->hcpriv; + struct usb_host_endpoint *hep; unsigned long flags; struct sl811h_ep *ep; int retval = 0; + spin_lock_irqsave(&sl811->lock, flags); + hep = urb->hcpriv; if (!hep) - return -EINVAL; + goto fail; - spin_lock_irqsave(&sl811->lock, flags); ep = hep->hcpriv; if (ep) { /* finish right away if this urb can't be active ... @@ -1017,6 +1026,7 @@ static int sl811h_urb_dequeue(struct usb_hcd *hcd, struct urb *urb) VDBG("dequeue, urb %p active %s; wait4irq\n", urb, (sl811->active_a == ep) ? "A" : "B"); } else +fail: retval = -EINVAL; spin_unlock_irqrestore(&sl811->lock, flags); return retval; @@ -1576,6 +1586,9 @@ sl811h_start(struct usb_hcd *hcd) if (sl811->board && sl811->board->power) hub_set_power_budget(udev, sl811->board->power * 2); + /* enable power and interupts */ + port_power(sl811, 1); + return 0; } @@ -1618,7 +1631,7 @@ static struct hc_driver sl811h_hc_driver = { /*-------------------------------------------------------------------------*/ -static int __init_or_module +static int __devexit sl811h_remove(struct device *dev) { struct usb_hcd *hcd = dev_get_drvdata(dev); @@ -1631,21 +1644,20 @@ sl811h_remove(struct device *dev) remove_debug_file(sl811); usb_remove_hcd(hcd); - iounmap(sl811->data_reg); + /* some platforms may use IORESOURCE_IO */ res = platform_get_resource(pdev, IORESOURCE_MEM, 1); - release_mem_region(res->start, 1); + if (res) + iounmap(sl811->data_reg); - iounmap(sl811->addr_reg); res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - release_mem_region(res->start, 1); + if (res) + iounmap(sl811->addr_reg); usb_put_hcd(hcd); return 0; } -#define resource_len(r) (((r)->end - (r)->start) + 1) - -static int __init +static int __devinit sl811h_probe(struct device *dev) { struct usb_hcd *hcd; @@ -1656,7 +1668,7 @@ sl811h_probe(struct device *dev) void __iomem *addr_reg; void __iomem *data_reg; int retval; - u8 tmp; + u8 tmp, ioaddr = 0; /* basic sanity checks first. board-specific init logic should * have initialized these three resources and probably board @@ -1664,13 +1676,8 @@ sl811h_probe(struct device *dev) * minimal sanity checking. */ pdev = container_of(dev, struct platform_device, dev); - if (pdev->num_resources < 3) - return -ENODEV; - - addr = platform_get_resource(pdev, IORESOURCE_MEM, 0); - data = platform_get_resource(pdev, IORESOURCE_MEM, 1); irq = platform_get_irq(pdev, 0); - if (!addr || !data || irq < 0) + if (pdev->num_resources < 3 || irq < 0) return -ENODEV; /* refuse to confuse usbcore */ @@ -1679,24 +1686,31 @@ sl811h_probe(struct device *dev) return -EINVAL; } - if (!request_mem_region(addr->start, 1, hcd_name)) { - retval = -EBUSY; - goto err1; - } - addr_reg = ioremap(addr->start, resource_len(addr)); - if (addr_reg == NULL) { - retval = -ENOMEM; - goto err2; - } + /* the chip may be wired for either kind of addressing */ + addr = platform_get_resource(pdev, IORESOURCE_MEM, 0); + data = platform_get_resource(pdev, IORESOURCE_MEM, 1); + retval = -EBUSY; + if (!addr || !data) { + addr = platform_get_resource(pdev, IORESOURCE_IO, 0); + data = platform_get_resource(pdev, IORESOURCE_IO, 1); + if (!addr || !data) + return -ENODEV; + ioaddr = 1; + + addr_reg = (void __iomem *) addr->start; + data_reg = (void __iomem *) data->start; + } else { + addr_reg = ioremap(addr->start, 1); + if (addr_reg == NULL) { + retval = -ENOMEM; + goto err2; + } - if (!request_mem_region(data->start, 1, hcd_name)) { - retval = -EBUSY; - goto err3; - } - data_reg = ioremap(data->start, resource_len(addr)); - if (data_reg == NULL) { - retval = -ENOMEM; - goto err4; + data_reg = ioremap(data->start, 1); + if (data_reg == NULL) { + retval = -ENOMEM; + goto err4; + } } /* allocate and initialize hcd */ @@ -1737,12 +1751,14 @@ sl811h_probe(struct device *dev) goto err6; } - /* sl811s would need a different handler for this irq */ -#ifdef CONFIG_ARM - /* Cypress docs say the IRQ is IRQT_HIGH ... */ - set_irq_type(irq, IRQT_RISING); -#endif - retval = usb_add_hcd(hcd, irq, SA_INTERRUPT); + /* The chip's IRQ is level triggered, active high. A requirement + * for platform device setup is to cope with things like signal + * inverters (e.g. CF is active low) or working only with edge + * triggers (e.g. most ARM CPUs). Initial driver stress testing + * was on a system with single edge triggering, so most sorts of + * triggering arrangement should work. + */ + retval = usb_add_hcd(hcd, irq, SA_INTERRUPT | SA_SHIRQ); if (retval != 0) goto err6; @@ -1752,14 +1768,12 @@ sl811h_probe(struct device *dev) err6: usb_put_hcd(hcd); err5: - iounmap(data_reg); + if (!ioaddr) + iounmap(data_reg); err4: - release_mem_region(data->start, 1); - err3: - iounmap(addr_reg); + if (!ioaddr) + iounmap(addr_reg); err2: - release_mem_region(addr->start, 1); - err1: DBG("init error, %d\n", retval); return retval; } @@ -1767,7 +1781,7 @@ sl811h_probe(struct device *dev) #ifdef CONFIG_PM /* for this device there's no useful distinction between the controller - * and its root hub, except that the root hub only gets direct PM calls + * and its root hub, except that the root hub only gets direct PM calls * when CONFIG_USB_SUSPEND is enabled. */ @@ -1821,20 +1835,22 @@ sl811h_resume(struct device *dev, u32 phase) #endif -static struct device_driver sl811h_driver = { +/* this driver is exported so sl811_cs can depend on it */ +struct device_driver sl811h_driver = { .name = (char *) hcd_name, .bus = &platform_bus_type, .probe = sl811h_probe, - .remove = sl811h_remove, + .remove = __devexit_p(sl811h_remove), .suspend = sl811h_suspend, .resume = sl811h_resume, }; +EXPORT_SYMBOL(sl811h_driver); /*-------------------------------------------------------------------------*/ - -static int __init sl811h_init(void) + +static int __init sl811h_init(void) { if (usb_disabled()) return -ENODEV; @@ -1844,8 +1860,8 @@ static int __init sl811h_init(void) } module_init(sl811h_init); -static void __exit sl811h_cleanup(void) -{ +static void __exit sl811h_cleanup(void) +{ driver_unregister(&sl811h_driver); } module_exit(sl811h_cleanup); diff --git a/drivers/usb/host/sl811_cs.c b/drivers/usb/host/sl811_cs.c new file mode 100644 index 00000000000..6e173265095 --- /dev/null +++ b/drivers/usb/host/sl811_cs.c @@ -0,0 +1,442 @@ +/* + * PCMCIA driver for SL811HS (as found in REX-CFU1U) + * Filename: sl811_cs.c + * Author: Yukio Yamamoto + * + * Port to sl811-hcd and 2.6.x by + * Botond Botyanszki <boti@rocketmail.com> + * Simon Pickering + * + * Last update: 2005-05-12 + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/sched.h> +#include <linux/ptrace.h> +#include <linux/slab.h> +#include <linux/string.h> +#include <linux/timer.h> +#include <linux/ioport.h> + +#include <pcmcia/version.h> +#include <pcmcia/cs_types.h> +#include <pcmcia/cs.h> +#include <pcmcia/cistpl.h> +#include <pcmcia/cisreg.h> +#include <pcmcia/ds.h> + +#include <linux/usb_sl811.h> + +MODULE_AUTHOR("Botond Botyanszki"); +MODULE_DESCRIPTION("REX-CFU1U PCMCIA driver for 2.6"); +MODULE_LICENSE("GPL"); + + +/*====================================================================*/ +/* MACROS */ +/*====================================================================*/ + +#if defined(DEBUG) || defined(CONFIG_USB_DEBUG) || defined(PCMCIA_DEBUG) + +static int pc_debug = 0; +module_param(pc_debug, int, 0644); + +#define DBG(n, args...) if (pc_debug>(n)) printk(KERN_DEBUG "sl811_cs: " args) + +#else +#define DBG(n, args...) do{}while(0) +#endif /* no debugging */ + +#define INFO(args...) printk(KERN_INFO "sl811_cs: " args) + +#define INT_MODULE_PARM(n, v) static int n = v; module_param(n, int, 0444) + +#define CS_CHECK(fn, ret) \ + do { \ + last_fn = (fn); \ + if ((last_ret = (ret)) != 0) \ + goto cs_failed; \ + } while (0) + +/*====================================================================*/ +/* VARIABLES */ +/*====================================================================*/ + +static const char driver_name[DEV_NAME_LEN] = "sl811_cs"; + +static dev_link_t *dev_list = NULL; + +static int irq_list[4] = { -1 }; +static int irq_list_count; + +module_param_array(irq_list, int, &irq_list_count, 0444); + +INT_MODULE_PARM(irq_mask, 0xdeb8); + +typedef struct local_info_t { + dev_link_t link; + dev_node_t node; +} local_info_t; + +/*====================================================================*/ + +static void release_platform_dev(struct device * dev) +{ + DBG(0, "sl811_cs platform_dev release\n"); + dev->parent = NULL; +} + +static struct sl811_platform_data platform_data = { + .potpg = 100, + .power = 50, /* == 100mA */ + // .reset = ... FIXME: invoke CF reset on the card +}; + +static struct resource resources[] = { + [0] = { + .flags = IORESOURCE_IRQ, + }, + [1] = { + // .name = "address", + .flags = IORESOURCE_IO, + }, + [2] = { + // .name = "data", + .flags = IORESOURCE_IO, + }, +}; + +extern struct device_driver sl811h_driver; + +static struct platform_device platform_dev = { + .id = -1, + .dev = { + .platform_data = &platform_data, + .release = release_platform_dev, + }, + .resource = resources, + .num_resources = ARRAY_SIZE(resources), +}; + +static int sl811_hc_init(struct device *parent, ioaddr_t base_addr, int irq) +{ + if (platform_dev.dev.parent) + return -EBUSY; + platform_dev.dev.parent = parent; + + /* finish seting up the platform device */ + resources[0].start = irq; + + resources[1].start = base_addr; + resources[1].end = base_addr; + + resources[2].start = base_addr + 1; + resources[2].end = base_addr + 1; + + /* The driver core will probe for us. We know sl811-hcd has been + * initialized already because of the link order dependency. + */ + platform_dev.name = sl811h_driver.name; + return platform_device_register(&platform_dev); +} + +/*====================================================================*/ + +static void sl811_cs_detach(dev_link_t *link) +{ + dev_link_t **linkp; + + DBG(0, "sl811_cs_detach(0x%p)\n", link); + + /* Locate device structure */ + for (linkp = &dev_list; *linkp; linkp = &(*linkp)->next) { + if (*linkp == link) + break; + } + if (*linkp == NULL) + return; + + /* Break the link with Card Services */ + if (link->handle) + pcmcia_deregister_client(link->handle); + + /* Unlink device structure, and free it */ + *linkp = link->next; + /* This points to the parent local_info_t struct */ + kfree(link->priv); +} + +static void sl811_cs_release(dev_link_t * link) +{ + + DBG(0, "sl811_cs_release(0x%p)\n", link); + + if (link->open) { + DBG(1, "sl811_cs: release postponed, '%s' still open\n", + link->dev->dev_name); + link->state |= DEV_STALE_CONFIG; + return; + } + + /* Unlink the device chain */ + link->dev = NULL; + + platform_device_unregister(&platform_dev); + pcmcia_release_configuration(link->handle); + if (link->io.NumPorts1) + pcmcia_release_io(link->handle, &link->io); + if (link->irq.AssignedIRQ) + pcmcia_release_irq(link->handle, &link->irq); + link->state &= ~DEV_CONFIG; + + if (link->state & DEV_STALE_LINK) + sl811_cs_detach(link); +} + +static void sl811_cs_config(dev_link_t *link) +{ + client_handle_t handle = link->handle; + struct device *parent = &handle_to_dev(handle); + local_info_t *dev = link->priv; + tuple_t tuple; + cisparse_t parse; + int last_fn, last_ret; + u_char buf[64]; + config_info_t conf; + cistpl_cftable_entry_t dflt = { 0 }; + + DBG(0, "sl811_cs_config(0x%p)\n", link); + + tuple.DesiredTuple = CISTPL_CONFIG; + tuple.Attributes = 0; + tuple.TupleData = buf; + tuple.TupleDataMax = sizeof(buf); + tuple.TupleOffset = 0; + CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(handle, &tuple)); + CS_CHECK(GetTupleData, pcmcia_get_tuple_data(handle, &tuple)); + CS_CHECK(ParseTuple, pcmcia_parse_tuple(handle, &tuple, &parse)); + link->conf.ConfigBase = parse.config.base; + link->conf.Present = parse.config.rmask[0]; + + /* Configure card */ + link->state |= DEV_CONFIG; + + /* Look up the current Vcc */ + CS_CHECK(GetConfigurationInfo, + pcmcia_get_configuration_info(handle, &conf)); + link->conf.Vcc = conf.Vcc; + + tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY; + CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(handle, &tuple)); + while (1) { + cistpl_cftable_entry_t *cfg = &(parse.cftable_entry); + + if (pcmcia_get_tuple_data(handle, &tuple) != 0 + || pcmcia_parse_tuple(handle, &tuple, &parse) + != 0) + goto next_entry; + + if (cfg->flags & CISTPL_CFTABLE_DEFAULT) { + dflt = *cfg; + } + + if (cfg->index == 0) + goto next_entry; + + link->conf.ConfigIndex = cfg->index; + + /* Use power settings for Vcc and Vpp if present */ + /* Note that the CIS values need to be rescaled */ + if (cfg->vcc.present & (1<<CISTPL_POWER_VNOM)) { + if (cfg->vcc.param[CISTPL_POWER_VNOM]/10000 + != conf.Vcc) + goto next_entry; + } else if (dflt.vcc.present & (1<<CISTPL_POWER_VNOM)) { + if (dflt.vcc.param[CISTPL_POWER_VNOM]/10000 + != conf.Vcc) + goto next_entry; + } + + if (cfg->vpp1.present & (1<<CISTPL_POWER_VNOM)) + link->conf.Vpp1 = link->conf.Vpp2 = + cfg->vpp1.param[CISTPL_POWER_VNOM]/10000; + else if (dflt.vpp1.present & (1<<CISTPL_POWER_VNOM)) + link->conf.Vpp1 = link->conf.Vpp2 = + dflt.vpp1.param[CISTPL_POWER_VNOM]/10000; + + /* we need an interrupt */ + if (cfg->irq.IRQInfo1 || dflt.irq.IRQInfo1) + link->conf.Attributes |= CONF_ENABLE_IRQ; + + /* IO window settings */ + link->io.NumPorts1 = link->io.NumPorts2 = 0; + if ((cfg->io.nwin > 0) || (dflt.io.nwin > 0)) { + cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt.io; + + link->io.Attributes1 = IO_DATA_PATH_WIDTH_8; + link->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK; + link->io.BasePort1 = io->win[0].base; + link->io.NumPorts1 = io->win[0].len; + + if (pcmcia_request_io(link->handle, &link->io) != 0) + goto next_entry; + } + break; + +next_entry: + if (link->io.NumPorts1) + pcmcia_release_io(link->handle, &link->io); + last_ret = pcmcia_get_next_tuple(handle, &tuple); + } + + /* require an IRQ and two registers */ + if (!link->io.NumPorts1 || link->io.NumPorts1 < 2) + goto cs_failed; + if (link->conf.Attributes & CONF_ENABLE_IRQ) + CS_CHECK(RequestIRQ, + pcmcia_request_irq(link->handle, &link->irq)); + else + goto cs_failed; + + CS_CHECK(RequestConfiguration, + pcmcia_request_configuration(link->handle, &link->conf)); + + sprintf(dev->node.dev_name, driver_name); + dev->node.major = dev->node.minor = 0; + link->dev = &dev->node; + + printk(KERN_INFO "%s: index 0x%02x: Vcc %d.%d", + dev->node.dev_name, link->conf.ConfigIndex, + link->conf.Vcc/10, link->conf.Vcc%10); + if (link->conf.Vpp1) + printk(", Vpp %d.%d", link->conf.Vpp1/10, link->conf.Vpp1%10); + printk(", irq %d", link->irq.AssignedIRQ); + printk(", io 0x%04x-0x%04x", link->io.BasePort1, + link->io.BasePort1+link->io.NumPorts1-1); + printk("\n"); + + link->state &= ~DEV_CONFIG_PENDING; + + if (sl811_hc_init(parent, link->io.BasePort1, link->irq.AssignedIRQ) + < 0) { +cs_failed: + printk("sl811_cs_config failed\n"); + cs_error(link->handle, last_fn, last_ret); + sl811_cs_release(link); + link->state &= ~DEV_CONFIG_PENDING; + } +} + +static int +sl811_cs_event(event_t event, int priority, event_callback_args_t *args) +{ + dev_link_t *link = args->client_data; + + DBG(1, "sl811_cs_event(0x%06x)\n", event); + + switch (event) { + case CS_EVENT_CARD_REMOVAL: + link->state &= ~DEV_PRESENT; + if (link->state & DEV_CONFIG) + sl811_cs_release(link); + break; + + case CS_EVENT_CARD_INSERTION: + link->state |= DEV_PRESENT | DEV_CONFIG_PENDING; + sl811_cs_config(link); + break; + + case CS_EVENT_PM_SUSPEND: + link->state |= DEV_SUSPEND; + /* Fall through... */ + case CS_EVENT_RESET_PHYSICAL: + if (link->state & DEV_CONFIG) + pcmcia_release_configuration(link->handle); + break; + + case CS_EVENT_PM_RESUME: + link->state &= ~DEV_SUSPEND; + /* Fall through... */ + case CS_EVENT_CARD_RESET: + if (link->state & DEV_CONFIG) + pcmcia_request_configuration(link->handle, &link->conf); + DBG(0, "reset sl811-hcd here?\n"); + break; + } + return 0; +} + +static dev_link_t *sl811_cs_attach(void) +{ + local_info_t *local; + dev_link_t *link; + client_reg_t client_reg; + int ret, i; + + local = kmalloc(sizeof(local_info_t), GFP_KERNEL); + if (!local) + return NULL; + memset(local, 0, sizeof(local_info_t)); + link = &local->link; + link->priv = local; + + /* Initialize */ + link->irq.Attributes = IRQ_TYPE_EXCLUSIVE; + link->irq.IRQInfo1 = IRQ_INFO2_VALID|IRQ_LEVEL_ID; + if (irq_list[0] == -1) + link->irq.IRQInfo2 = irq_mask; + else + for (i = 0; i < irq_list_count; i++) + link->irq.IRQInfo2 |= 1 << irq_list[i]; + link->irq.Handler = NULL; + + link->conf.Attributes = 0; + link->conf.Vcc = 33; + link->conf.IntType = INT_MEMORY_AND_IO; + + /* Register with Card Services */ + link->next = dev_list; + dev_list = link; + client_reg.dev_info = (dev_info_t *) &driver_name; + client_reg.Attributes = INFO_IO_CLIENT | INFO_CARD_SHARE; + client_reg.EventMask = + CS_EVENT_CARD_INSERTION | CS_EVENT_CARD_REMOVAL | + CS_EVENT_RESET_PHYSICAL | CS_EVENT_CARD_RESET | + CS_EVENT_PM_SUSPEND | CS_EVENT_PM_RESUME; + client_reg.event_handler = &sl811_cs_event; + client_reg.Version = 0x0210; + client_reg.event_callback_args.client_data = link; + ret = pcmcia_register_client(&link->handle, &client_reg); + if (ret != CS_SUCCESS) { + cs_error(link->handle, RegisterClient, ret); + sl811_cs_detach(link); + return NULL; + } + + return link; +} + +static struct pcmcia_driver sl811_cs_driver = { + .owner = THIS_MODULE, + .drv = { + .name = (char *)driver_name, + }, + .attach = sl811_cs_attach, + .detach = sl811_cs_detach, +}; + +/*====================================================================*/ + +static int __init init_sl811_cs(void) +{ + return pcmcia_register_driver(&sl811_cs_driver); +} +module_init(init_sl811_cs); + +static void __exit exit_sl811_cs(void) +{ + pcmcia_unregister_driver(&sl811_cs_driver); +} +module_exit(exit_sl811_cs); diff --git a/drivers/usb/media/pwc/pwc-ctrl.c b/drivers/usb/media/pwc/pwc-ctrl.c index 3e1e4fe20d8..53099190952 100644 --- a/drivers/usb/media/pwc/pwc-ctrl.c +++ b/drivers/usb/media/pwc/pwc-ctrl.c @@ -48,8 +48,6 @@ #include "pwc-uncompress.h" #include "pwc-kiara.h" #include "pwc-timon.h" -#include "pwc-dec1.h" -#include "pwc-dec23.h" /* Request types: video */ #define SET_LUM_CTL 0x01 diff --git a/drivers/usb/media/pwc/pwc-uncompress.c b/drivers/usb/media/pwc/pwc-uncompress.c index c596083f06b..bc3b1635eab 100644 --- a/drivers/usb/media/pwc/pwc-uncompress.c +++ b/drivers/usb/media/pwc/pwc-uncompress.c @@ -29,8 +29,6 @@ #include "pwc.h" #include "pwc-uncompress.h" -#include "pwc-dec1.h" -#include "pwc-dec23.h" int pwc_decompress(struct pwc_device *pdev) { diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index 52394f08a94..051c3a77b41 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -364,6 +364,7 @@ static struct usb_device_id id_table_8U232AM [] = { { USB_DEVICE_VER(FTDI_VID, PROTEGO_SPECIAL_3, 0, 0x3ff) }, { USB_DEVICE_VER(FTDI_VID, PROTEGO_SPECIAL_4, 0, 0x3ff) }, { USB_DEVICE_VER(FTDI_VID, FTDI_ELV_UO100_PID, 0, 0x3ff) }, + { USB_DEVICE_VER(FTDI_VID, FTDI_ELV_UM100_PID, 0, 0x3ff) }, { USB_DEVICE_VER(FTDI_VID, INSIDE_ACCESSO, 0, 0x3ff) }, { USB_DEVICE_VER(INTREPID_VID, INTREPID_VALUECAN_PID, 0, 0x3ff) }, { USB_DEVICE_VER(INTREPID_VID, INTREPID_NEOVI_PID, 0, 0x3ff) }, @@ -475,6 +476,7 @@ static struct usb_device_id id_table_FT232BM [] = { { USB_DEVICE_VER(FTDI_VID, FTDI_GUDEADS_E88E_PID, 0x400, 0xffff) }, { USB_DEVICE_VER(FTDI_VID, FTDI_GUDEADS_E88F_PID, 0x400, 0xffff) }, { USB_DEVICE_VER(FTDI_VID, FTDI_ELV_UO100_PID, 0x400, 0xffff) }, + { USB_DEVICE_VER(FTDI_VID, FTDI_ELV_UM100_PID, 0x400, 0xffff) }, { USB_DEVICE_VER(FTDI_VID, LINX_SDMUSBQSS_PID, 0x400, 0xffff) }, { USB_DEVICE_VER(FTDI_VID, LINX_MASTERDEVEL2_PID, 0x400, 0xffff) }, { USB_DEVICE_VER(FTDI_VID, LINX_FUTURE_0_PID, 0x400, 0xffff) }, @@ -618,6 +620,7 @@ static struct usb_device_id id_table_combined [] = { { USB_DEVICE_VER(FTDI_VID, FTDI_GUDEADS_E88E_PID, 0x400, 0xffff) }, { USB_DEVICE_VER(FTDI_VID, FTDI_GUDEADS_E88F_PID, 0x400, 0xffff) }, { USB_DEVICE(FTDI_VID, FTDI_ELV_UO100_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_ELV_UM100_PID) }, { USB_DEVICE_VER(FTDI_VID, LINX_SDMUSBQSS_PID, 0x400, 0xffff) }, { USB_DEVICE_VER(FTDI_VID, LINX_MASTERDEVEL2_PID, 0x400, 0xffff) }, { USB_DEVICE_VER(FTDI_VID, LINX_FUTURE_0_PID, 0x400, 0xffff) }, diff --git a/drivers/usb/serial/ftdi_sio.h b/drivers/usb/serial/ftdi_sio.h index a52bb13a9ce..8866376823a 100644 --- a/drivers/usb/serial/ftdi_sio.h +++ b/drivers/usb/serial/ftdi_sio.h @@ -144,6 +144,8 @@ /* ELV USB Module UO100 (PID sent by Stefan Frings) */ #define FTDI_ELV_UO100_PID 0xFB58 /* Product Id */ +/* ELV USB Module UM100 (PID sent by Arnim Laeuger) */ +#define FTDI_ELV_UM100_PID 0xFB5A /* Product Id */ /* * Definitions for ID TECH (www.idt-net.com) devices diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c index 4536f63faae..5da76dd8fb2 100644 --- a/drivers/usb/serial/usb-serial.c +++ b/drivers/usb/serial/usb-serial.c @@ -1297,13 +1297,6 @@ static int __init usb_serial_init(void) goto exit_bus; } - /* register the generic driver, if we should */ - result = usb_serial_generic_register(debug); - if (result < 0) { - err("%s - registering generic driver failed", __FUNCTION__); - goto exit_generic; - } - usb_serial_tty_driver->owner = THIS_MODULE; usb_serial_tty_driver->driver_name = "usbserial"; usb_serial_tty_driver->devfs_name = "usb/tts/"; @@ -1329,17 +1322,24 @@ static int __init usb_serial_init(void) goto exit_tty; } + /* register the generic driver, if we should */ + result = usb_serial_generic_register(debug); + if (result < 0) { + err("%s - registering generic driver failed", __FUNCTION__); + goto exit_generic; + } + info(DRIVER_DESC " " DRIVER_VERSION); return result; +exit_generic: + usb_deregister(&usb_serial_driver); + exit_tty: tty_unregister_driver(usb_serial_tty_driver); exit_reg_driver: - usb_serial_generic_deregister(); - -exit_generic: bus_unregister(&usb_serial_bus_type); exit_bus: diff --git a/drivers/video/intelfb/intelfbdrv.c b/drivers/video/intelfb/intelfbdrv.c index 549e2293926..25f9a9a65c2 100644 --- a/drivers/video/intelfb/intelfbdrv.c +++ b/drivers/video/intelfb/intelfbdrv.c @@ -228,17 +228,17 @@ MODULE_DESCRIPTION( MODULE_LICENSE("Dual BSD/GPL"); MODULE_DEVICE_TABLE(pci, intelfb_pci_table); -static int accel __initdata = 1; -static int vram __initdata = 4; -static int hwcursor __initdata = 1; -static int mtrr __initdata = 1; -static int fixed __initdata = 0; -static int noinit __initdata = 0; -static int noregister __initdata = 0; -static int probeonly __initdata = 0; -static int idonly __initdata = 0; -static int bailearly __initdata = 0; -static char *mode __initdata = NULL; +static int accel = 1; +static int vram = 4; +static int hwcursor = 1; +static int mtrr = 1; +static int fixed = 0; +static int noinit = 0; +static int noregister = 0; +static int probeonly = 0; +static int idonly = 0; +static int bailearly = 0; +static char *mode = NULL; module_param(accel, bool, S_IRUGO); MODULE_PARM_DESC(accel, "Enable console acceleration"); diff --git a/fs/cifs/README b/fs/cifs/README index e74df0c7325..34b0cf7111f 100644 --- a/fs/cifs/README +++ b/fs/cifs/README @@ -371,7 +371,7 @@ A partial list of the supported mount options follows: on newly created files, directories, and devices (create, mkdir, mknod) which will result in the server setting the uid and gid to the default (usually the server uid of the - usern who mounted the share). Letting the server (rather than + user who mounted the share). Letting the server (rather than the client) set the uid and gid is the default. This parameter has no effect if the CIFS Unix Extensions are not negotiated. @@ -384,7 +384,7 @@ A partial list of the supported mount options follows: client (e.g. when the application is doing large sequential reads bigger than page size without rereading the same data) this can provide better performance than the default - behavior which caches reads (reaadahead) and writes + behavior which caches reads (readahead) and writes (writebehind) through the local Linux client pagecache if oplock (caching token) is granted and held. Note that direct allows write operations larger than page size diff --git a/fs/cifs/cifsproto.h b/fs/cifs/cifsproto.h index 0010511083f..ea239dea571 100644 --- a/fs/cifs/cifsproto.h +++ b/fs/cifs/cifsproto.h @@ -228,7 +228,7 @@ extern int CIFSGetSrvInodeNumber(const int xid, struct cifsTconInfo *tcon, const struct nls_table *nls_codepage, int remap_special_chars); #endif /* CONFIG_CIFS_EXPERIMENTAL */ -extern int cifs_convertUCSpath(char *target, const __u16 *source, int maxlen, +extern int cifs_convertUCSpath(char *target, const __le16 *source, int maxlen, const struct nls_table * codepage); extern int cifsConvertToUCS(__le16 * target, const char *source, int maxlen, const struct nls_table * cp, int mapChars); diff --git a/fs/cifs/cifssmb.c b/fs/cifs/cifssmb.c index 741ff0c69f3..3c628bf667a 100644 --- a/fs/cifs/cifssmb.c +++ b/fs/cifs/cifssmb.c @@ -567,7 +567,7 @@ DelFileRetry: if (pSMB->hdr.Flags2 & SMBFLG2_UNICODE) { name_len = - cifsConvertToUCS((__u16 *) pSMB->fileName, fileName, + cifsConvertToUCS((__le16 *) pSMB->fileName, fileName, PATH_MAX, nls_codepage, remap); name_len++; /* trailing null */ name_len *= 2; @@ -665,7 +665,7 @@ MkDirRetry: return rc; if (pSMB->hdr.Flags2 & SMBFLG2_UNICODE) { - name_len = cifsConvertToUCS((__u16 *) pSMB->DirName, name, + name_len = cifsConvertToUCS((__le16 *) pSMB->DirName, name, PATH_MAX, nls_codepage, remap); name_len++; /* trailing null */ name_len *= 2; @@ -719,7 +719,7 @@ openRetry: if (pSMB->hdr.Flags2 & SMBFLG2_UNICODE) { count = 1; /* account for one byte pad to word boundary */ name_len = - cifsConvertToUCS((__u16 *) (pSMB->fileName + 1), + cifsConvertToUCS((__le16 *) (pSMB->fileName + 1), fileName, PATH_MAX, nls_codepage, remap); name_len++; /* trailing null */ name_len *= 2; @@ -1141,7 +1141,7 @@ renameRetry: if (pSMB->hdr.Flags2 & SMBFLG2_UNICODE) { name_len = - cifsConvertToUCS((__u16 *) pSMB->OldFileName, fromName, + cifsConvertToUCS((__le16 *) pSMB->OldFileName, fromName, PATH_MAX, nls_codepage, remap); name_len++; /* trailing null */ name_len *= 2; @@ -1149,7 +1149,7 @@ renameRetry: /* protocol requires ASCII signature byte on Unicode string */ pSMB->OldFileName[name_len + 1] = 0x00; name_len2 = - cifsConvertToUCS((__u16 *) &pSMB->OldFileName[name_len + 2], + cifsConvertToUCS((__le16 *) &pSMB->OldFileName[name_len + 2], toName, PATH_MAX, nls_codepage, remap); name_len2 += 1 /* trailing null */ + 1 /* Signature word */ ; name_len2 *= 2; /* convert to bytes */ @@ -1236,10 +1236,10 @@ int CIFSSMBRenameOpenFile(const int xid,struct cifsTconInfo *pTcon, /* unicode only call */ if(target_name == NULL) { sprintf(dummy_string,"cifs%x",pSMB->hdr.Mid); - len_of_str = cifsConvertToUCS((__u16 *)rename_info->target_name, + len_of_str = cifsConvertToUCS((__le16 *)rename_info->target_name, dummy_string, 24, nls_codepage, remap); } else { - len_of_str = cifsConvertToUCS((__u16 *)rename_info->target_name, + len_of_str = cifsConvertToUCS((__le16 *)rename_info->target_name, target_name, PATH_MAX, nls_codepage, remap); } rename_info->target_name_len = cpu_to_le32(2 * len_of_str); @@ -1296,7 +1296,7 @@ copyRetry: pSMB->Flags = cpu_to_le16(flags & COPY_TREE); if (pSMB->hdr.Flags2 & SMBFLG2_UNICODE) { - name_len = cifsConvertToUCS((__u16 *) pSMB->OldFileName, + name_len = cifsConvertToUCS((__le16 *) pSMB->OldFileName, fromName, PATH_MAX, nls_codepage, remap); name_len++; /* trailing null */ @@ -1304,7 +1304,7 @@ copyRetry: pSMB->OldFileName[name_len] = 0x04; /* pad */ /* protocol requires ASCII signature byte on Unicode string */ pSMB->OldFileName[name_len + 1] = 0x00; - name_len2 = cifsConvertToUCS((__u16 *)&pSMB->OldFileName[name_len + 2], + name_len2 = cifsConvertToUCS((__le16 *)&pSMB->OldFileName[name_len + 2], toName, PATH_MAX, nls_codepage, remap); name_len2 += 1 /* trailing null */ + 1 /* Signature word */ ; name_len2 *= 2; /* convert to bytes */ @@ -1453,7 +1453,7 @@ createHardLinkRetry: return rc; if (pSMB->hdr.Flags2 & SMBFLG2_UNICODE) { - name_len = cifsConvertToUCS((__u16 *) pSMB->FileName, toName, + name_len = cifsConvertToUCS((__le16 *) pSMB->FileName, toName, PATH_MAX, nls_codepage, remap); name_len++; /* trailing null */ name_len *= 2; @@ -1476,7 +1476,7 @@ createHardLinkRetry: data_offset = (char *) (&pSMB->hdr.Protocol) + offset; if (pSMB->hdr.Flags2 & SMBFLG2_UNICODE) { name_len_target = - cifsConvertToUCS((__u16 *) data_offset, fromName, PATH_MAX, + cifsConvertToUCS((__le16 *) data_offset, fromName, PATH_MAX, nls_codepage, remap); name_len_target++; /* trailing null */ name_len_target *= 2; @@ -1546,14 +1546,14 @@ winCreateHardLinkRetry: if (pSMB->hdr.Flags2 & SMBFLG2_UNICODE) { name_len = - cifsConvertToUCS((__u16 *) pSMB->OldFileName, fromName, + cifsConvertToUCS((__le16 *) pSMB->OldFileName, fromName, PATH_MAX, nls_codepage, remap); name_len++; /* trailing null */ name_len *= 2; pSMB->OldFileName[name_len] = 0; /* pad */ pSMB->OldFileName[name_len + 1] = 0x04; name_len2 = - cifsConvertToUCS((__u16 *)&pSMB->OldFileName[name_len + 2], + cifsConvertToUCS((__le16 *)&pSMB->OldFileName[name_len + 2], toName, PATH_MAX, nls_codepage, remap); name_len2 += 1 /* trailing null */ + 1 /* Signature word */ ; name_len2 *= 2; /* convert to bytes */ @@ -1939,7 +1939,7 @@ queryAclRetry: if (pSMB->hdr.Flags2 & SMBFLG2_UNICODE) { name_len = - cifsConvertToUCS((__u16 *) pSMB->FileName, searchName, + cifsConvertToUCS((__le16 *) pSMB->FileName, searchName, PATH_MAX, nls_codepage, remap); name_len++; /* trailing null */ name_len *= 2; @@ -2024,7 +2024,7 @@ setAclRetry: return rc; if (pSMB->hdr.Flags2 & SMBFLG2_UNICODE) { name_len = - cifsConvertToUCS((__u16 *) pSMB->FileName, fileName, + cifsConvertToUCS((__le16 *) pSMB->FileName, fileName, PATH_MAX, nls_codepage, remap); name_len++; /* trailing null */ name_len *= 2; @@ -2188,7 +2188,7 @@ QPathInfoRetry: if (pSMB->hdr.Flags2 & SMBFLG2_UNICODE) { name_len = - cifsConvertToUCS((__u16 *) pSMB->FileName, searchName, + cifsConvertToUCS((__le16 *) pSMB->FileName, searchName, PATH_MAX, nls_codepage, remap); name_len++; /* trailing null */ name_len *= 2; @@ -2269,7 +2269,7 @@ UnixQPathInfoRetry: if (pSMB->hdr.Flags2 & SMBFLG2_UNICODE) { name_len = - cifsConvertToUCS((__u16 *) pSMB->FileName, searchName, + cifsConvertToUCS((__le16 *) pSMB->FileName, searchName, PATH_MAX, nls_codepage, remap); name_len++; /* trailing null */ name_len *= 2; @@ -2350,7 +2350,7 @@ findUniqueRetry: if (pSMB->hdr.Flags2 & SMBFLG2_UNICODE) { name_len = - cifsConvertToUCS((wchar_t *) pSMB->FileName, searchName, PATH_MAX + cifsConvertToUCS((__le16 *) pSMB->FileName, searchName, PATH_MAX /* find define for this maxpathcomponent */ , nls_codepage); name_len++; /* trailing null */ @@ -2435,7 +2435,7 @@ findFirstRetry: if (pSMB->hdr.Flags2 & SMBFLG2_UNICODE) { name_len = - cifsConvertToUCS((__u16 *) pSMB->FileName,searchName, + cifsConvertToUCS((__le16 *) pSMB->FileName,searchName, PATH_MAX, nls_codepage, remap); /* We can not add the asterik earlier in case it got remapped to 0xF03A as if it were part of the @@ -2726,7 +2726,7 @@ GetInodeNumberRetry: if (pSMB->hdr.Flags2 & SMBFLG2_UNICODE) { name_len = - cifsConvertToUCS((__u16 *) pSMB->FileName, searchName, + cifsConvertToUCS((__le16 *) pSMB->FileName, searchName, PATH_MAX,nls_codepage, remap); name_len++; /* trailing null */ name_len *= 2; @@ -2837,7 +2837,7 @@ getDFSRetry: if (ses->capabilities & CAP_UNICODE) { pSMB->hdr.Flags2 |= SMBFLG2_UNICODE; name_len = - cifsConvertToUCS((__u16 *) pSMB->RequestFileName, + cifsConvertToUCS((__le16 *) pSMB->RequestFileName, searchName, PATH_MAX, nls_codepage, remap); name_len++; /* trailing null */ name_len *= 2; @@ -3369,7 +3369,7 @@ SetEOFRetry: if (pSMB->hdr.Flags2 & SMBFLG2_UNICODE) { name_len = - cifsConvertToUCS((__u16 *) pSMB->FileName, fileName, + cifsConvertToUCS((__le16 *) pSMB->FileName, fileName, PATH_MAX, nls_codepage, remap); name_len++; /* trailing null */ name_len *= 2; @@ -3627,7 +3627,7 @@ SetTimesRetry: if (pSMB->hdr.Flags2 & SMBFLG2_UNICODE) { name_len = - cifsConvertToUCS((__u16 *) pSMB->FileName, fileName, + cifsConvertToUCS((__le16 *) pSMB->FileName, fileName, PATH_MAX, nls_codepage, remap); name_len++; /* trailing null */ name_len *= 2; @@ -3708,7 +3708,7 @@ SetAttrLgcyRetry: if (pSMB->hdr.Flags2 & SMBFLG2_UNICODE) { name_len = - ConvertToUCS((wchar_t *) pSMB->fileName, fileName, + ConvertToUCS((__le16 *) pSMB->fileName, fileName, PATH_MAX, nls_codepage); name_len++; /* trailing null */ name_len *= 2; @@ -3759,7 +3759,7 @@ setPermsRetry: if (pSMB->hdr.Flags2 & SMBFLG2_UNICODE) { name_len = - cifsConvertToUCS((__u16 *) pSMB->FileName, fileName, + cifsConvertToUCS((__le16 *) pSMB->FileName, fileName, PATH_MAX, nls_codepage, remap); name_len++; /* trailing null */ name_len *= 2; @@ -3904,7 +3904,7 @@ QAllEAsRetry: if (pSMB->hdr.Flags2 & SMBFLG2_UNICODE) { name_len = - cifsConvertToUCS((wchar_t *) pSMB->FileName, searchName, + cifsConvertToUCS((__le16 *) pSMB->FileName, searchName, PATH_MAX, nls_codepage, remap); name_len++; /* trailing null */ name_len *= 2; @@ -4047,7 +4047,7 @@ QEARetry: if (pSMB->hdr.Flags2 & SMBFLG2_UNICODE) { name_len = - cifsConvertToUCS((__u16 *) pSMB->FileName, searchName, + cifsConvertToUCS((__le16 *) pSMB->FileName, searchName, PATH_MAX, nls_codepage, remap); name_len++; /* trailing null */ name_len *= 2; @@ -4194,7 +4194,7 @@ SetEARetry: if (pSMB->hdr.Flags2 & SMBFLG2_UNICODE) { name_len = - cifsConvertToUCS((__u16 *) pSMB->FileName, fileName, + cifsConvertToUCS((__le16 *) pSMB->FileName, fileName, PATH_MAX, nls_codepage, remap); name_len++; /* trailing null */ name_len *= 2; diff --git a/fs/cifs/dir.c b/fs/cifs/dir.c index e3137aa48cd..3f3538d4a1f 100644 --- a/fs/cifs/dir.c +++ b/fs/cifs/dir.c @@ -392,7 +392,8 @@ cifs_lookup(struct inode *parent_dir_inode, struct dentry *direntry, struct name rc = 0; d_add(direntry, NULL); } else { - cERROR(1,("Error 0x%x or on cifs_get_inode_info in lookup",rc)); + cERROR(1,("Error 0x%x on cifs_get_inode_info in lookup of %s", + rc,full_path)); /* BB special case check for Access Denied - watch security exposure of returning dir info implicitly via different rc if file exists or not but no access BB */ diff --git a/fs/cifs/inode.c b/fs/cifs/inode.c index 67094728826..b8b78cbb34c 100644 --- a/fs/cifs/inode.c +++ b/fs/cifs/inode.c @@ -422,7 +422,8 @@ int cifs_unlink(struct inode *inode, struct dentry *direntry) cifs_sb->mnt_cifs_flags & CIFS_MOUNT_MAP_SPECIAL_CHR); if (!rc) { - direntry->d_inode->i_nlink--; + if(direntry->d_inode) + direntry->d_inode->i_nlink--; } else if (rc == -ENOENT) { d_drop(direntry); } else if (rc == -ETXTBSY) { @@ -440,7 +441,8 @@ int cifs_unlink(struct inode *inode, struct dentry *direntry) cifs_sb->mnt_cifs_flags & CIFS_MOUNT_MAP_SPECIAL_CHR); CIFSSMBClose(xid, pTcon, netfid); - direntry->d_inode->i_nlink--; + if(direntry->d_inode) + direntry->d_inode->i_nlink--; } } else if (rc == -EACCES) { /* try only if r/o attribute set in local lookup data? */ @@ -494,7 +496,8 @@ int cifs_unlink(struct inode *inode, struct dentry *direntry) cifs_sb->mnt_cifs_flags & CIFS_MOUNT_MAP_SPECIAL_CHR); if (!rc) { - direntry->d_inode->i_nlink--; + if(direntry->d_inode) + direntry->d_inode->i_nlink--; } else if (rc == -ETXTBSY) { int oplock = FALSE; __u16 netfid; @@ -514,17 +517,20 @@ int cifs_unlink(struct inode *inode, struct dentry *direntry) cifs_sb->mnt_cifs_flags & CIFS_MOUNT_MAP_SPECIAL_CHR); CIFSSMBClose(xid, pTcon, netfid); - direntry->d_inode->i_nlink--; + if(direntry->d_inode) + direntry->d_inode->i_nlink--; } /* BB if rc = -ETXTBUSY goto the rename logic BB */ } } } - cifsInode = CIFS_I(direntry->d_inode); - cifsInode->time = 0; /* will force revalidate to get info when - needed */ - direntry->d_inode->i_ctime = inode->i_ctime = inode->i_mtime = - current_fs_time(inode->i_sb); + if(direntry->d_inode) { + cifsInode = CIFS_I(direntry->d_inode); + cifsInode->time = 0; /* will force revalidate to get info + when needed */ + direntry->d_inode->i_ctime = current_fs_time(inode->i_sb); + } + inode->i_ctime = inode->i_mtime = current_fs_time(inode->i_sb); cifsInode = CIFS_I(inode); cifsInode->time = 0; /* force revalidate of dir as well */ diff --git a/fs/cifs/misc.c b/fs/cifs/misc.c index db14b503d89..072b4ee8c53 100644 --- a/fs/cifs/misc.c +++ b/fs/cifs/misc.c @@ -571,6 +571,7 @@ cifs_convertUCSpath(char *target, const __le16 * source, int maxlen, break; case UNI_LESSTHAN: target[j] = '<'; + break; default: len = cp->uni2char(src_char, &target[j], NLS_MAX_CHARSET_SIZE); diff --git a/fs/hostfs/hostfs_kern.c b/fs/hostfs/hostfs_kern.c index 14a0d339d03..4bf43ea87c4 100644 --- a/fs/hostfs/hostfs_kern.c +++ b/fs/hostfs/hostfs_kern.c @@ -23,7 +23,6 @@ #include "kern_util.h" #include "kern.h" #include "user_util.h" -#include "2_5compat.h" #include "init.h" struct hostfs_inode_info { diff --git a/fs/proc/proc_devtree.c b/fs/proc/proc_devtree.c index 67423c696c0..6fd57f15419 100644 --- a/fs/proc/proc_devtree.c +++ b/fs/proc/proc_devtree.c @@ -12,15 +12,8 @@ #include <asm/uaccess.h> #ifndef HAVE_ARCH_DEVTREE_FIXUPS -static inline void set_node_proc_entry(struct device_node *np, struct proc_dir_entry *de) -{ -} - -static void inline set_node_name_link(struct device_node *np, struct proc_dir_entry *de) -{ -} - -static void inline set_node_addr_link(struct device_node *np, struct proc_dir_entry *de) +static inline void set_node_proc_entry(struct device_node *np, + struct proc_dir_entry *de) { } #endif @@ -58,89 +51,67 @@ static int property_read_proc(char *page, char **start, off_t off, /* * Process a node, adding entries for its children and its properties. */ -void proc_device_tree_add_node(struct device_node *np, struct proc_dir_entry *de) +void proc_device_tree_add_node(struct device_node *np, + struct proc_dir_entry *de) { struct property *pp; struct proc_dir_entry *ent; - struct device_node *child, *sib; - const char *p, *at; - int l; - struct proc_dir_entry *list, **lastp, *al; + struct device_node *child; + struct proc_dir_entry *list = NULL, **lastp; + const char *p; set_node_proc_entry(np, de); lastp = &list; - for (pp = np->properties; pp != 0; pp = pp->next) { - /* - * Unfortunately proc_register puts each new entry - * at the beginning of the list. So we rearrange them. - */ - ent = create_proc_read_entry(pp->name, strncmp(pp->name, "security-", 9) ? - S_IRUGO : S_IRUSR, de, property_read_proc, pp); - if (ent == 0) - break; - if (!strncmp(pp->name, "security-", 9)) - ent->size = 0; /* don't leak number of password chars */ - else - ent->size = pp->length; - *lastp = ent; - lastp = &ent->next; - } - child = NULL; - while ((child = of_get_next_child(np, child))) { + for (child = NULL; (child = of_get_next_child(np, child));) { p = strrchr(child->full_name, '/'); if (!p) p = child->full_name; else ++p; - /* chop off '@0' if the name ends with that */ - l = strlen(p); - if (l > 2 && p[l-2] == '@' && p[l-1] == '0') - l -= 2; ent = proc_mkdir(p, de); if (ent == 0) break; *lastp = ent; + ent->next = NULL; lastp = &ent->next; proc_device_tree_add_node(child, ent); - - /* - * If we left the address part on the name, consider - * adding symlinks from the name and address parts. - */ - if (p[l] != 0 || (at = strchr(p, '@')) == 0) - continue; - + } + of_node_put(child); + for (pp = np->properties; pp != 0; pp = pp->next) { /* - * If this is the first node with a given name property, - * add a symlink with the name property as its name. + * Yet another Apple device-tree bogosity: on some machines, + * they have properties & nodes with the same name. Those + * properties are quite unimportant for us though, thus we + * simply "skip" them here, but we do have to check. */ - sib = NULL; - while ((sib = of_get_next_child(np, sib)) && sib != child) - if (sib->name && strcmp(sib->name, child->name) == 0) - break; - if (sib == child && strncmp(p, child->name, l) != 0) { - al = proc_symlink(child->name, de, ent->name); - if (al == 0) { - of_node_put(sib); + for (ent = list; ent != NULL; ent = ent->next) + if (!strcmp(ent->name, pp->name)) break; - } - set_node_name_link(child, al); - *lastp = al; - lastp = &al->next; + if (ent != NULL) { + printk(KERN_WARNING "device-tree: property \"%s\" name" + " conflicts with node in %s\n", pp->name, + np->full_name); + continue; } - of_node_put(sib); + /* - * Add another directory with the @address part as its name. + * Unfortunately proc_register puts each new entry + * at the beginning of the list. So we rearrange them. */ - al = proc_symlink(at, de, ent->name); - if (al == 0) + ent = create_proc_read_entry(pp->name, + strncmp(pp->name, "security-", 9) + ? S_IRUGO : S_IRUSR, de, + property_read_proc, pp); + if (ent == 0) break; - set_node_addr_link(child, al); - *lastp = al; - lastp = &al->next; + if (!strncmp(pp->name, "security-", 9)) + ent->size = 0; /* don't leak number of password chars */ + else + ent->size = pp->length; + ent->next = NULL; + *lastp = ent; + lastp = &ent->next; } - of_node_put(child); - *lastp = NULL; de->subdir = list; } diff --git a/fs/udf/udftime.c b/fs/udf/udftime.c index 457a8fe2857..85d8dbe843f 100644 --- a/fs/udf/udftime.c +++ b/fs/udf/udftime.c @@ -46,7 +46,7 @@ #endif /* How many days come before each month (0-12). */ -const unsigned short int __mon_yday[2][13] = +static const unsigned short int __mon_yday[2][13] = { /* Normal years. */ { 0, 31, 59, 90, 120, 151, 181, 212, 243, 273, 304, 334, 365 }, diff --git a/include/asm-i386/timer.h b/include/asm-i386/timer.h index 40c54f69780..c3470984983 100644 --- a/include/asm-i386/timer.h +++ b/include/asm-i386/timer.h @@ -53,6 +53,7 @@ extern struct init_timer_opts timer_cyclone_init; extern unsigned long calibrate_tsc(void); extern void init_cpu_khz(void); +extern int recalibrate_cpu_khz(void); #ifdef CONFIG_HPET_TIMER extern struct init_timer_opts timer_hpet_init; extern unsigned long calibrate_tsc_hpet(unsigned long *tsc_hpet_quotient_ptr); diff --git a/include/asm-ia64/perfmon.h b/include/asm-ia64/perfmon.h index ed5416c5b1a..7f3333dd00e 100644 --- a/include/asm-ia64/perfmon.h +++ b/include/asm-ia64/perfmon.h @@ -177,6 +177,10 @@ typedef union { extern long perfmonctl(int fd, int cmd, void *arg, int narg); +typedef struct { + void (*handler)(int irq, void *arg, struct pt_regs *regs); +} pfm_intr_handler_desc_t; + extern void pfm_save_regs (struct task_struct *); extern void pfm_load_regs (struct task_struct *); @@ -187,6 +191,10 @@ extern void pfm_syst_wide_update_task(struct task_struct *, unsigned long info, extern void pfm_inherit(struct task_struct *task, struct pt_regs *regs); extern void pfm_init_percpu(void); extern void pfm_handle_work(void); +extern int pfm_install_alt_pmu_interrupt(pfm_intr_handler_desc_t *h); +extern int pfm_remove_alt_pmu_interrupt(pfm_intr_handler_desc_t *h); + + /* * Reset PMD register flags diff --git a/include/asm-ia64/sn/sn_sal.h b/include/asm-ia64/sn/sn_sal.h index 56d74ca76b5..eb0395ad0d6 100644 --- a/include/asm-ia64/sn/sn_sal.h +++ b/include/asm-ia64/sn/sn_sal.h @@ -115,6 +115,13 @@ #define SAL_IROUTER_INTR_XMIT SAL_CONSOLE_INTR_XMIT #define SAL_IROUTER_INTR_RECV SAL_CONSOLE_INTR_RECV +/* + * Error Handling Features + */ +#define SAL_ERR_FEAT_MCA_SLV_TO_OS_INIT_SLV 0x1 +#define SAL_ERR_FEAT_LOG_SBES 0x2 +#define SAL_ERR_FEAT_MFR_OVERRIDE 0x4 +#define SAL_ERR_FEAT_SBE_THRESHOLD 0xffff0000 /* * SAL Error Codes @@ -342,6 +349,25 @@ ia64_sn_plat_cpei_handler(void) } /* + * Set Error Handling Features + */ +static inline u64 +ia64_sn_plat_set_error_handling_features(void) +{ + struct ia64_sal_retval ret_stuff; + + ret_stuff.status = 0; + ret_stuff.v0 = 0; + ret_stuff.v1 = 0; + ret_stuff.v2 = 0; + SAL_CALL_REENTRANT(ret_stuff, SN_SAL_SET_ERROR_HANDLING_FEATURES, + (SAL_ERR_FEAT_MCA_SLV_TO_OS_INIT_SLV | SAL_ERR_FEAT_LOG_SBES), + 0, 0, 0, 0, 0, 0); + + return ret_stuff.status; +} + +/* * Checks for console input. */ static inline u64 @@ -472,7 +498,7 @@ static inline u64 ia64_sn_pod_mode(void) { struct ia64_sal_retval isrv; - SAL_CALL(isrv, SN_SAL_POD_MODE, 0, 0, 0, 0, 0, 0, 0); + SAL_CALL_REENTRANT(isrv, SN_SAL_POD_MODE, 0, 0, 0, 0, 0, 0, 0); if (isrv.status) return 0; return isrv.v0; diff --git a/include/asm-ppc/cpm2.h b/include/asm-ppc/cpm2.h index 42fd1068cf2..c5883dbed63 100644 --- a/include/asm-ppc/cpm2.h +++ b/include/asm-ppc/cpm2.h @@ -1039,6 +1039,52 @@ typedef struct im_idma { #define CMXSCR_TS4CS_CLK7 0x00000006 /* SCC4 Tx Clock Source is CLK7 */ #define CMXSCR_TS4CS_CLK8 0x00000007 /* SCC4 Tx Clock Source is CLK8 */ +/*----------------------------------------------------------------------- + * SIUMCR - SIU Module Configuration Register 4-31 + */ +#define SIUMCR_BBD 0x80000000 /* Bus Busy Disable */ +#define SIUMCR_ESE 0x40000000 /* External Snoop Enable */ +#define SIUMCR_PBSE 0x20000000 /* Parity Byte Select Enable */ +#define SIUMCR_CDIS 0x10000000 /* Core Disable */ +#define SIUMCR_DPPC00 0x00000000 /* Data Parity Pins Configuration*/ +#define SIUMCR_DPPC01 0x04000000 /* - " - */ +#define SIUMCR_DPPC10 0x08000000 /* - " - */ +#define SIUMCR_DPPC11 0x0c000000 /* - " - */ +#define SIUMCR_L2CPC00 0x00000000 /* L2 Cache Pins Configuration */ +#define SIUMCR_L2CPC01 0x01000000 /* - " - */ +#define SIUMCR_L2CPC10 0x02000000 /* - " - */ +#define SIUMCR_L2CPC11 0x03000000 /* - " - */ +#define SIUMCR_LBPC00 0x00000000 /* Local Bus Pins Configuration */ +#define SIUMCR_LBPC01 0x00400000 /* - " - */ +#define SIUMCR_LBPC10 0x00800000 /* - " - */ +#define SIUMCR_LBPC11 0x00c00000 /* - " - */ +#define SIUMCR_APPC00 0x00000000 /* Address Parity Pins Configuration*/ +#define SIUMCR_APPC01 0x00100000 /* - " - */ +#define SIUMCR_APPC10 0x00200000 /* - " - */ +#define SIUMCR_APPC11 0x00300000 /* - " - */ +#define SIUMCR_CS10PC00 0x00000000 /* CS10 Pin Configuration */ +#define SIUMCR_CS10PC01 0x00040000 /* - " - */ +#define SIUMCR_CS10PC10 0x00080000 /* - " - */ +#define SIUMCR_CS10PC11 0x000c0000 /* - " - */ +#define SIUMCR_BCTLC00 0x00000000 /* Buffer Control Configuration */ +#define SIUMCR_BCTLC01 0x00010000 /* - " - */ +#define SIUMCR_BCTLC10 0x00020000 /* - " - */ +#define SIUMCR_BCTLC11 0x00030000 /* - " - */ +#define SIUMCR_MMR00 0x00000000 /* Mask Masters Requests */ +#define SIUMCR_MMR01 0x00004000 /* - " - */ +#define SIUMCR_MMR10 0x00008000 /* - " - */ +#define SIUMCR_MMR11 0x0000c000 /* - " - */ +#define SIUMCR_LPBSE 0x00002000 /* LocalBus Parity Byte Select Enable*/ + +/*----------------------------------------------------------------------- + * SCCR - System Clock Control Register 9-8 +*/ +#define SCCR_PCI_MODE 0x00000100 /* PCI Mode */ +#define SCCR_PCI_MODCK 0x00000080 /* Value of PCI_MODCK pin */ +#define SCCR_PCIDF_MSK 0x00000078 /* PCI division factor */ +#define SCCR_PCIDF_SHIFT 3 + + #endif /* __CPM2__ */ #endif /* __KERNEL__ */ diff --git a/include/asm-ppc/m8260_pci.h b/include/asm-ppc/m8260_pci.h index 163a6b91d5b..bf9e05dd54b 100644 --- a/include/asm-ppc/m8260_pci.h +++ b/include/asm-ppc/m8260_pci.h @@ -19,6 +19,7 @@ * Define the vendor/device ID for the MPC8265. */ #define PCI_DEVICE_ID_MPC8265 ((0x18C0 << 16) | PCI_VENDOR_ID_MOTOROLA) +#define PCI_DEVICE_ID_MPC8272 ((0x18C1 << 16) | PCI_VENDOR_ID_MOTOROLA) #define M8265_PCIBR0 0x101ac #define M8265_PCIBR1 0x101b0 diff --git a/include/asm-ppc/mpc8260.h b/include/asm-ppc/mpc8260.h index d820894e599..89eb8a2ac69 100644 --- a/include/asm-ppc/mpc8260.h +++ b/include/asm-ppc/mpc8260.h @@ -41,7 +41,7 @@ #endif #ifdef CONFIG_PCI_8260 -#include <syslib/m8260_pci.h> +#include <syslib/m82xx_pci.h> #endif /* Make sure the memory translation stuff is there if PCI not used. diff --git a/include/asm-ppc64/prom.h b/include/asm-ppc64/prom.h index 2440a2c90ae..04b1a84f7ca 100644 --- a/include/asm-ppc64/prom.h +++ b/include/asm-ppc64/prom.h @@ -147,9 +147,7 @@ struct device_node { struct device_node *sibling; struct device_node *next; /* next device of same type */ struct device_node *allnext; /* next in list of all nodes */ - struct proc_dir_entry *pde; /* this node's proc directory */ - struct proc_dir_entry *name_link; /* name symlink */ - struct proc_dir_entry *addr_link; /* addr symlink */ + struct proc_dir_entry *pde; /* this node's proc directory */ struct kref kref; unsigned long _flags; }; @@ -174,15 +172,6 @@ static inline void set_node_proc_entry(struct device_node *dn, struct proc_dir_e dn->pde = de; } -static void inline set_node_name_link(struct device_node *dn, struct proc_dir_entry *de) -{ - dn->name_link = de; -} - -static void inline set_node_addr_link(struct device_node *dn, struct proc_dir_entry *de) -{ - dn->addr_link = de; -} /* OBSOLETE: Old stlye node lookup */ extern struct device_node *find_devices(const char *name); diff --git a/include/asm-sh/thread_info.h b/include/asm-sh/thread_info.h index d82f883d8e6..4bbbd9f3c37 100644 --- a/include/asm-sh/thread_info.h +++ b/include/asm-sh/thread_info.h @@ -27,7 +27,7 @@ struct thread_info { #endif -#define PREEMPT_ACTIVE 0x4000000 +#define PREEMPT_ACTIVE 0x10000000 /* * macros/functions for gaining access to the thread information structure diff --git a/include/asm-sh64/thread_info.h b/include/asm-sh64/thread_info.h index e65f394da47..8a32d6bd0b7 100644 --- a/include/asm-sh64/thread_info.h +++ b/include/asm-sh64/thread_info.h @@ -73,7 +73,7 @@ static inline struct thread_info *current_thread_info(void) #define THREAD_SIZE 8192 -#define PREEMPT_ACTIVE 0x4000000 +#define PREEMPT_ACTIVE 0x10000000 /* thread information flags */ #define TIF_SYSCALL_TRACE 0 /* syscall trace active */ diff --git a/include/asm-sparc64/iommu.h b/include/asm-sparc64/iommu.h index 5fd16e42a04..0de7a3da79c 100644 --- a/include/asm-sparc64/iommu.h +++ b/include/asm-sparc64/iommu.h @@ -16,4 +16,6 @@ #define IOPTE_CACHE 0x0000000000000010UL /* Cached (in UPA E-cache) */ #define IOPTE_WRITE 0x0000000000000002UL /* Writeable */ +#define IOMMU_NUM_CTXS 4096 + #endif /* !(_SPARC_IOMMU_H) */ diff --git a/include/asm-sparc64/pbm.h b/include/asm-sparc64/pbm.h index 92999631c81..4c15610a2ba 100644 --- a/include/asm-sparc64/pbm.h +++ b/include/asm-sparc64/pbm.h @@ -15,6 +15,7 @@ #include <asm/io.h> #include <asm/page.h> #include <asm/oplib.h> +#include <asm/iommu.h> /* The abstraction used here is that there are PCI controllers, * each with one (Sabre) or two (PSYCHO/SCHIZO) PCI bus modules @@ -40,9 +41,6 @@ struct pci_iommu { */ spinlock_t lock; - /* Context allocator. */ - unsigned int iommu_cur_ctx; - /* IOMMU page table, a linear array of ioptes. */ iopte_t *page_table; /* The page table itself. */ int page_table_sz_bits; /* log2 of ow many pages does it map? */ @@ -87,6 +85,10 @@ struct pci_iommu { u16 flush; } alloc_info[PBM_NCLUSTERS]; + /* CTX allocation. */ + unsigned long ctx_lowest_free; + unsigned long ctx_bitmap[IOMMU_NUM_CTXS / (sizeof(unsigned long) * 8)]; + /* Here a PCI controller driver describes the areas of * PCI memory space where DMA to/from physical memory * are addressed. Drivers interrogate the PCI layer diff --git a/include/asm-um/page.h b/include/asm-um/page.h index 504ea8e486b..5afee8a8cdf 100644 --- a/include/asm-um/page.h +++ b/include/asm-um/page.h @@ -98,7 +98,13 @@ extern unsigned long uml_physmem; extern unsigned long to_phys(void *virt); extern void *to_virt(unsigned long phys); -#define __pa(virt) to_phys((void *) virt) + +/* Cast to unsigned long before casting to void * to avoid a warning from + * mmap_kmem about cutting a long long down to a void *. Not sure that + * casting is the right thing, but 32-bit UML can't have 64-bit virtual + * addresses + */ +#define __pa(virt) to_phys((void *) (unsigned long) virt) #define __va(phys) to_virt((unsigned long) phys) #define page_to_pfn(page) ((page) - mem_map) diff --git a/include/asm-um/pgtable.h b/include/asm-um/pgtable.h index 510e513c7f8..a8804092031 100644 --- a/include/asm-um/pgtable.h +++ b/include/asm-um/pgtable.h @@ -114,17 +114,9 @@ extern unsigned long end_iomem; extern unsigned long pg0[1024]; /* - * BAD_PAGETABLE is used when we need a bogus page-table, while - * BAD_PAGE is used for a bogus page. - * * ZERO_PAGE is a global shared page that is always zero: used * for zero-mapped memory areas etc.. */ -extern pte_t __bad_page(void); -extern pte_t * __bad_pagetable(void); - -#define BAD_PAGETABLE __bad_pagetable() -#define BAD_PAGE __bad_page() #define ZERO_PAGE(vaddr) virt_to_page(empty_zero_page) diff --git a/include/asm-um/thread_info.h b/include/asm-um/thread_info.h index a10ea155907..1feaaf148ef 100644 --- a/include/asm-um/thread_info.h +++ b/include/asm-um/thread_info.h @@ -41,18 +41,17 @@ struct thread_info { #define init_thread_info (init_thread_union.thread_info) #define init_stack (init_thread_union.stack) +#define THREAD_SIZE ((1 << CONFIG_KERNEL_STACK_ORDER) * PAGE_SIZE) /* how to get the thread information struct from C */ static inline struct thread_info *current_thread_info(void) { struct thread_info *ti; - unsigned long mask = PAGE_SIZE * - (1 << CONFIG_KERNEL_STACK_ORDER) - 1; - ti = (struct thread_info *) (((unsigned long) &ti) & ~mask); + unsigned long mask = THREAD_SIZE - 1; + ti = (struct thread_info *) (((unsigned long) &ti) & ~mask); return ti; } /* thread information allocation */ -#define THREAD_SIZE ((1 << CONFIG_KERNEL_STACK_ORDER) * PAGE_SIZE) #define alloc_thread_info(tsk) \ ((struct thread_info *) kmalloc(THREAD_SIZE, GFP_KERNEL)) #define free_thread_info(ti) kfree(ti) @@ -62,7 +61,7 @@ static inline struct thread_info *current_thread_info(void) #endif -#define PREEMPT_ACTIVE 0x4000000 +#define PREEMPT_ACTIVE 0x10000000 #define TIF_SYSCALL_TRACE 0 /* syscall trace active */ #define TIF_SIGPENDING 1 /* signal pending */ diff --git a/include/linux/cpufreq.h b/include/linux/cpufreq.h index f21af067d01..927daa86c9b 100644 --- a/include/linux/cpufreq.h +++ b/include/linux/cpufreq.h @@ -49,7 +49,7 @@ int cpufreq_unregister_notifier(struct notifier_block *nb, unsigned int list); /* Frequency values here are CPU kHz so that hardware which doesn't run * with some frequencies can complain without having to guess what per * cent / per mille means. - * Maximum transition latency is in microseconds - if it's unknown, + * Maximum transition latency is in nanoseconds - if it's unknown, * CPUFREQ_ETERNAL shall be used. */ diff --git a/include/linux/etherdevice.h b/include/linux/etherdevice.h index 220748b7abe..a1478258d00 100644 --- a/include/linux/etherdevice.h +++ b/include/linux/etherdevice.h @@ -56,18 +56,32 @@ static inline int is_zero_ether_addr(const u8 *addr) } /** + * is_multicast_ether_addr - Determine if the given Ethernet address is a + * multicast address. + * + * @addr: Pointer to a six-byte array containing the Ethernet address + * + * Return true if the address is a multicast address. + */ +static inline int is_multicast_ether_addr(const u8 *addr) +{ + return addr[0] & 0x01; +} + +/** * is_valid_ether_addr - Determine if the given Ethernet address is valid * @addr: Pointer to a six-byte array containing the Ethernet address * * Check that the Ethernet address (MAC) is not 00:00:00:00:00:00, is not - * a multicast address, and is not FF:FF:FF:FF:FF:FF. The multicast - * and FF:FF:... tests are combined into the single test "!(addr[0]&1)". + * a multicast address, and is not FF:FF:FF:FF:FF:FF. * * Return true if the address is valid. */ static inline int is_valid_ether_addr(const u8 *addr) { - return !(addr[0]&1) && !is_zero_ether_addr(addr); + /* FF:FF:FF:FF:FF:FF is a multicast address so we don't need to + * explicitly check for it here. */ + return !is_multicast_ether_addr(addr) && !is_zero_ether_addr(addr); } /** @@ -83,6 +97,6 @@ static inline void random_ether_addr(u8 *addr) addr [0] &= 0xfe; /* clear multicast bit */ addr [0] |= 0x02; /* set local assignment bit (IEEE802) */ } -#endif +#endif /* __KERNEL__ */ #endif /* _LINUX_ETHERDEVICE_H */ diff --git a/include/linux/ethtool.h b/include/linux/ethtool.h index c85b210490e..a0ab26aab45 100644 --- a/include/linux/ethtool.h +++ b/include/linux/ethtool.h @@ -256,6 +256,7 @@ struct net_device; u32 ethtool_op_get_link(struct net_device *dev); u32 ethtool_op_get_tx_csum(struct net_device *dev); int ethtool_op_set_tx_csum(struct net_device *dev, u32 data); +int ethtool_op_set_tx_hw_csum(struct net_device *dev, u32 data); u32 ethtool_op_get_sg(struct net_device *dev); int ethtool_op_set_sg(struct net_device *dev, u32 data); u32 ethtool_op_get_tso(struct net_device *dev); diff --git a/include/linux/gameport.h b/include/linux/gameport.h index b1272f822cf..cd623eccdbe 100644 --- a/include/linux/gameport.h +++ b/include/linux/gameport.h @@ -67,6 +67,8 @@ int gameport_open(struct gameport *gameport, struct gameport_driver *drv, int mo void gameport_close(struct gameport *gameport); void gameport_rescan(struct gameport *gameport); +#if defined(CONFIG_GAMEPORT) || (defined(MODULE) && defined(CONFIG_GAMEPORT_MODULE)) + void __gameport_register_port(struct gameport *gameport, struct module *owner); static inline void gameport_register_port(struct gameport *gameport) { @@ -75,6 +77,29 @@ static inline void gameport_register_port(struct gameport *gameport) void gameport_unregister_port(struct gameport *gameport); +void gameport_set_phys(struct gameport *gameport, const char *fmt, ...) + __attribute__ ((format (printf, 2, 3))); + +#else + +static inline void gameport_register_port(struct gameport *gameport) +{ + return; +} + +static inline void gameport_unregister_port(struct gameport *gameport) +{ + return; +} + +static inline void gameport_set_phys(struct gameport *gameport, + const char *fmt, ...) +{ + return; +} + +#endif + static inline struct gameport *gameport_allocate_port(void) { struct gameport *gameport = kcalloc(1, sizeof(struct gameport), GFP_KERNEL); @@ -92,9 +117,6 @@ static inline void gameport_set_name(struct gameport *gameport, const char *name strlcpy(gameport->name, name, sizeof(gameport->name)); } -void gameport_set_phys(struct gameport *gameport, const char *fmt, ...) - __attribute__ ((format (printf, 2, 3))); - /* * Use the following fucntions to manipulate gameport's per-port * driver-specific data. diff --git a/include/linux/hardirq.h b/include/linux/hardirq.h index ebc712e9106..8336dba1897 100644 --- a/include/linux/hardirq.h +++ b/include/linux/hardirq.h @@ -43,13 +43,17 @@ #define __IRQ_MASK(x) ((1UL << (x))-1) #define PREEMPT_MASK (__IRQ_MASK(PREEMPT_BITS) << PREEMPT_SHIFT) -#define HARDIRQ_MASK (__IRQ_MASK(HARDIRQ_BITS) << HARDIRQ_SHIFT) #define SOFTIRQ_MASK (__IRQ_MASK(SOFTIRQ_BITS) << SOFTIRQ_SHIFT) +#define HARDIRQ_MASK (__IRQ_MASK(HARDIRQ_BITS) << HARDIRQ_SHIFT) #define PREEMPT_OFFSET (1UL << PREEMPT_SHIFT) #define SOFTIRQ_OFFSET (1UL << SOFTIRQ_SHIFT) #define HARDIRQ_OFFSET (1UL << HARDIRQ_SHIFT) +#if PREEMPT_ACTIVE < (1 << (HARDIRQ_SHIFT + HARDIRQ_BITS)) +#error PREEMPT_ACTIVE is too low! +#endif + #define hardirq_count() (preempt_count() & HARDIRQ_MASK) #define softirq_count() (preempt_count() & SOFTIRQ_MASK) #define irq_count() (preempt_count() & (HARDIRQ_MASK | SOFTIRQ_MASK)) diff --git a/include/linux/inetdevice.h b/include/linux/inetdevice.h index 6fafb27877a..7e1e15f934f 100644 --- a/include/linux/inetdevice.h +++ b/include/linux/inetdevice.h @@ -29,6 +29,7 @@ struct ipv4_devconf int no_xfrm; int no_policy; int force_igmp_version; + int promote_secondaries; void *sysctl; }; @@ -71,6 +72,7 @@ struct in_device #define IN_DEV_SEC_REDIRECTS(in_dev) (ipv4_devconf.secure_redirects || (in_dev)->cnf.secure_redirects) #define IN_DEV_IDTAG(in_dev) ((in_dev)->cnf.tag) #define IN_DEV_MEDIUM_ID(in_dev) ((in_dev)->cnf.medium_id) +#define IN_DEV_PROMOTE_SECONDARIES(in_dev) (ipv4_devconf.promote_secondaries || (in_dev)->cnf.promote_secondaries) #define IN_DEV_RX_REDIRECTS(in_dev) \ ((IN_DEV_FORWARD(in_dev) && \ diff --git a/include/linux/libata.h b/include/linux/libata.h index ad410590664..b009f801e7c 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -410,6 +410,7 @@ extern u8 ata_chk_err(struct ata_port *ap); extern void ata_exec_command(struct ata_port *ap, struct ata_taskfile *tf); extern int ata_port_start (struct ata_port *ap); extern void ata_port_stop (struct ata_port *ap); +extern void ata_host_stop (struct ata_host_set *host_set); extern irqreturn_t ata_interrupt (int irq, void *dev_instance, struct pt_regs *regs); extern void ata_qc_prep(struct ata_queued_cmd *qc); extern int ata_qc_issue_prot(struct ata_queued_cmd *qc); diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h index b25bd02720d..470af8c1a4a 100644 --- a/include/linux/netdevice.h +++ b/include/linux/netdevice.h @@ -401,7 +401,7 @@ struct net_device } reg_state; /* Net device features */ - int features; + unsigned long features; #define NETIF_F_SG 1 /* Scatter/gather IO. */ #define NETIF_F_IP_CSUM 2 /* Can checksum only TCP/UDP over IPv4. */ #define NETIF_F_NO_CSUM 4 /* Does not require checksum. F.e. loopack. */ @@ -913,6 +913,7 @@ extern void dev_mc_discard(struct net_device *dev); extern void dev_set_promiscuity(struct net_device *dev, int inc); extern void dev_set_allmulti(struct net_device *dev, int inc); extern void netdev_state_change(struct net_device *dev); +extern void netdev_features_change(struct net_device *dev); /* Load a device via the kmod */ extern void dev_load(const char *name); extern void dev_mcast_init(void); diff --git a/include/linux/notifier.h b/include/linux/notifier.h index 9303a003e9a..5937dd6053c 100644 --- a/include/linux/notifier.h +++ b/include/linux/notifier.h @@ -56,6 +56,7 @@ extern int notifier_call_chain(struct notifier_block **n, unsigned long val, voi #define NETDEV_CHANGEADDR 0x0008 #define NETDEV_GOING_DOWN 0x0009 #define NETDEV_CHANGENAME 0x000A +#define NETDEV_FEAT_CHANGE 0x000B #define SYS_DOWN 0x0001 /* Notify of system down */ #define SYS_RESTART SYS_DOWN diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h index 7ccbc2e4272..b0d6134e1ee 100644 --- a/include/linux/pci_ids.h +++ b/include/linux/pci_ids.h @@ -1230,6 +1230,12 @@ #define PCI_DEVICE_ID_NVIDIA_QUADRO4_900XGL 0x0258 #define PCI_DEVICE_ID_NVIDIA_QUADRO4_750XGL 0x0259 #define PCI_DEVICE_ID_NVIDIA_QUADRO4_700XGL 0x025B +#define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP51_IDE 0x0265 +#define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP51_SATA 0x0266 +#define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP51_SATA2 0x0267 +#define PCI_DEVICE_ID_NVIDIA_NVENET_12 0x0268 +#define PCI_DEVICE_ID_NVIDIA_NVENET_13 0x0269 +#define PCI_DEVICE_ID_NVIDIA_MCP51_AUDIO 0x026B #define PCI_DEVICE_ID_NVIDIA_GEFORCE4_TI_4800 0x0280 #define PCI_DEVICE_ID_NVIDIA_GEFORCE4_TI_4800_8X 0x0281 #define PCI_DEVICE_ID_NVIDIA_GEFORCE4_TI_4800SE 0x0282 diff --git a/include/linux/sysctl.h b/include/linux/sysctl.h index 772998147e3..23032d9d607 100644 --- a/include/linux/sysctl.h +++ b/include/linux/sysctl.h @@ -399,6 +399,7 @@ enum NET_IPV4_CONF_FORCE_IGMP_VERSION=17, NET_IPV4_CONF_ARP_ANNOUNCE=18, NET_IPV4_CONF_ARP_IGNORE=19, + NET_IPV4_CONF_PROMOTE_SECONDARIES=20, __NET_IPV4_CONF_MAX }; diff --git a/include/net/route.h b/include/net/route.h index efe92b239ef..d34ca8fc675 100644 --- a/include/net/route.h +++ b/include/net/route.h @@ -181,9 +181,6 @@ static inline int ip_route_newports(struct rtable **rp, u16 sport, u16 dport, memcpy(&fl, &(*rp)->fl, sizeof(fl)); fl.fl_ip_sport = sport; fl.fl_ip_dport = dport; -#if defined(CONFIG_IP_ROUTE_MULTIPATH_CACHED) - fl.flags |= FLOWI_FLAG_MULTIPATHOLDROUTE; -#endif ip_rt_put(*rp); *rp = NULL; return ip_route_output_flow(rp, &fl, sk, 0); diff --git a/init/Kconfig b/init/Kconfig index d920baed109..a7660ccc693 100644 --- a/init/Kconfig +++ b/init/Kconfig @@ -442,7 +442,7 @@ config OBSOLETE_MODPARM config MODVERSIONS bool "Module versioning support (EXPERIMENTAL)" - depends on MODULES && EXPERIMENTAL && !UML + depends on MODULES && EXPERIMENTAL help Usually, you have to use modules compiled with your kernel. Saying Y here makes it sometimes possible to use modules diff --git a/kernel/irq/handle.c b/kernel/irq/handle.c index 06b5a632399..436c7d93c00 100644 --- a/kernel/irq/handle.c +++ b/kernel/irq/handle.c @@ -119,8 +119,6 @@ fastcall unsigned int __do_IRQ(unsigned int irq, struct pt_regs *regs) */ desc->handler->ack(irq); action_ret = handle_IRQ_event(irq, regs, desc->action); - if (!noirqdebug) - note_interrupt(irq, desc, action_ret); desc->handler->end(irq); return 1; } diff --git a/kernel/module.c b/kernel/module.c index 5734ab09d3f..83b3d376708 100644 --- a/kernel/module.c +++ b/kernel/module.c @@ -1758,6 +1758,7 @@ sys_init_module(void __user *umod, const char __user *uargs) { struct module *mod; + mm_segment_t old_fs = get_fs(); int ret = 0; /* Must have permission */ @@ -1775,6 +1776,9 @@ sys_init_module(void __user *umod, return PTR_ERR(mod); } + /* flush the icache in correct context */ + set_fs(KERNEL_DS); + /* Flush the instruction cache, since we've played with text */ if (mod->module_init) flush_icache_range((unsigned long)mod->module_init, @@ -1783,6 +1787,8 @@ sys_init_module(void __user *umod, flush_icache_range((unsigned long)mod->module_core, (unsigned long)mod->module_core + mod->core_size); + set_fs(old_fs); + /* Now sew it into the lists. They won't access us, since strong_try_module_get() will fail. */ stop_machine_run(__link_module, mod, NR_CPUS); diff --git a/lib/Kconfig.debug b/lib/Kconfig.debug index ac23847ce0e..0c421295e61 100644 --- a/lib/Kconfig.debug +++ b/lib/Kconfig.debug @@ -151,7 +151,8 @@ config DEBUG_FS config FRAME_POINTER bool "Compile the kernel with frame pointers" - depends on DEBUG_KERNEL && ((X86 && !X86_64) || CRIS || M68K || M68KNOMMU || FRV) + depends on DEBUG_KERNEL && ((X86 && !X86_64) || CRIS || M68K || M68KNOMMU || FRV || UML) + default y if DEBUG_INFO && UML help If you say Y here the resulting kernel image will be slightly larger and slower, but it will give very useful debugging information. diff --git a/net/bridge/br_device.c b/net/bridge/br_device.c index d9b72fde433..f564ee99782 100644 --- a/net/bridge/br_device.c +++ b/net/bridge/br_device.c @@ -21,10 +21,7 @@ static struct net_device_stats *br_dev_get_stats(struct net_device *dev) { - struct net_bridge *br; - - br = dev->priv; - + struct net_bridge *br = netdev_priv(dev); return &br->statistics; } @@ -54,9 +51,11 @@ int br_dev_xmit(struct sk_buff *skb, struct net_device *dev) static int br_dev_open(struct net_device *dev) { - netif_start_queue(dev); + struct net_bridge *br = netdev_priv(dev); - br_stp_enable_bridge(dev->priv); + br_features_recompute(br); + netif_start_queue(dev); + br_stp_enable_bridge(br); return 0; } @@ -67,7 +66,7 @@ static void br_dev_set_multicast_list(struct net_device *dev) static int br_dev_stop(struct net_device *dev) { - br_stp_disable_bridge(dev->priv); + br_stp_disable_bridge(netdev_priv(dev)); netif_stop_queue(dev); @@ -76,7 +75,7 @@ static int br_dev_stop(struct net_device *dev) static int br_change_mtu(struct net_device *dev, int new_mtu) { - if ((new_mtu < 68) || new_mtu > br_min_mtu(dev->priv)) + if (new_mtu < 68 || new_mtu > br_min_mtu(netdev_priv(dev))) return -EINVAL; dev->mtu = new_mtu; diff --git a/net/bridge/br_if.c b/net/bridge/br_if.c index 69872bf3b87..91bb895375f 100644 --- a/net/bridge/br_if.c +++ b/net/bridge/br_if.c @@ -314,6 +314,28 @@ int br_min_mtu(const struct net_bridge *br) return mtu; } +/* + * Recomputes features using slave's features + */ +void br_features_recompute(struct net_bridge *br) +{ + struct net_bridge_port *p; + unsigned long features, checksum; + + features = NETIF_F_SG | NETIF_F_FRAGLIST + | NETIF_F_HIGHDMA | NETIF_F_TSO; + checksum = NETIF_F_IP_CSUM; /* least commmon subset */ + + list_for_each_entry(p, &br->port_list, list) { + if (!(p->dev->features + & (NETIF_F_IP_CSUM|NETIF_F_NO_CSUM|NETIF_F_HW_CSUM))) + checksum = 0; + features &= p->dev->features; + } + + br->dev->features = features | checksum | NETIF_F_LLTX; +} + /* called with RTNL */ int br_add_if(struct net_bridge *br, struct net_device *dev) { @@ -368,6 +390,7 @@ int br_del_if(struct net_bridge *br, struct net_device *dev) spin_lock_bh(&br->lock); br_stp_recalculate_bridge_id(br); + br_features_recompute(br); spin_unlock_bh(&br->lock); return 0; diff --git a/net/bridge/br_input.c b/net/bridge/br_input.c index 2b1cce46cab..8f5f2e73099 100644 --- a/net/bridge/br_input.c +++ b/net/bridge/br_input.c @@ -26,7 +26,7 @@ static int br_pass_frame_up_finish(struct sk_buff *skb) #ifdef CONFIG_NETFILTER_DEBUG skb->nf_debug = 0; #endif - netif_rx(skb); + netif_receive_skb(skb); return 0; } @@ -54,6 +54,9 @@ int br_handle_frame_finish(struct sk_buff *skb) struct net_bridge_fdb_entry *dst; int passedup = 0; + /* insert into forwarding database after filtering to avoid spoofing */ + br_fdb_update(p->br, p, eth_hdr(skb)->h_source); + if (br->dev->flags & IFF_PROMISC) { struct sk_buff *skb2; @@ -108,8 +111,7 @@ int br_handle_frame(struct net_bridge_port *p, struct sk_buff **pskb) if (!is_valid_ether_addr(eth_hdr(skb)->h_source)) goto err; - if (p->state == BR_STATE_LEARNING || - p->state == BR_STATE_FORWARDING) + if (p->state == BR_STATE_LEARNING) br_fdb_update(p->br, p, eth_hdr(skb)->h_source); if (p->br->stp_enabled && diff --git a/net/bridge/br_notify.c b/net/bridge/br_notify.c index f8fb49e3476..917311c6828 100644 --- a/net/bridge/br_notify.c +++ b/net/bridge/br_notify.c @@ -65,6 +65,15 @@ static int br_device_event(struct notifier_block *unused, unsigned long event, v } break; + case NETDEV_FEAT_CHANGE: + if (br->dev->flags & IFF_UP) + br_features_recompute(br); + + /* could do recursive feature change notification + * but who would care?? + */ + break; + case NETDEV_DOWN: if (br->dev->flags & IFF_UP) br_stp_disable_port(p); diff --git a/net/bridge/br_private.h b/net/bridge/br_private.h index 54d63f1372a..bdf95a74d8c 100644 --- a/net/bridge/br_private.h +++ b/net/bridge/br_private.h @@ -174,6 +174,7 @@ extern int br_add_if(struct net_bridge *br, extern int br_del_if(struct net_bridge *br, struct net_device *dev); extern int br_min_mtu(const struct net_bridge *br); +extern void br_features_recompute(struct net_bridge *br); /* br_input.c */ extern int br_handle_frame_finish(struct sk_buff *skb); diff --git a/net/bridge/br_stp_bpdu.c b/net/bridge/br_stp_bpdu.c index b91a875aca0..d071f1c9ad0 100644 --- a/net/bridge/br_stp_bpdu.c +++ b/net/bridge/br_stp_bpdu.c @@ -140,6 +140,9 @@ int br_stp_handle_bpdu(struct sk_buff *skb) struct net_bridge *br = p->br; unsigned char *buf; + /* insert into forwarding database after filtering to avoid spoofing */ + br_fdb_update(p->br, p, eth_hdr(skb)->h_source); + /* need at least the 802 and STP headers */ if (!pskb_may_pull(skb, sizeof(header)+1) || memcmp(skb->data, header, sizeof(header))) diff --git a/net/core/dev.c b/net/core/dev.c index d4d9e2680ad..f15a3ffff63 100644 --- a/net/core/dev.c +++ b/net/core/dev.c @@ -761,6 +761,18 @@ int dev_change_name(struct net_device *dev, char *newname) } /** + * netdev_features_change - device changes fatures + * @dev: device to cause notification + * + * Called to indicate a device has changed features. + */ +void netdev_features_change(struct net_device *dev) +{ + notifier_call_chain(&netdev_chain, NETDEV_FEAT_CHANGE, dev); +} +EXPORT_SYMBOL(netdev_features_change); + +/** * netdev_state_change - device changes state * @dev: device to cause notification * diff --git a/net/core/ethtool.c b/net/core/ethtool.c index f05fde97c43..8ec484894d6 100644 --- a/net/core/ethtool.c +++ b/net/core/ethtool.c @@ -29,7 +29,7 @@ u32 ethtool_op_get_link(struct net_device *dev) u32 ethtool_op_get_tx_csum(struct net_device *dev) { - return (dev->features & NETIF_F_IP_CSUM) != 0; + return (dev->features & (NETIF_F_IP_CSUM | NETIF_F_HW_CSUM)) != 0; } int ethtool_op_set_tx_csum(struct net_device *dev, u32 data) @@ -42,6 +42,15 @@ int ethtool_op_set_tx_csum(struct net_device *dev, u32 data) return 0; } +int ethtool_op_set_tx_hw_csum(struct net_device *dev, u32 data) +{ + if (data) + dev->features |= NETIF_F_HW_CSUM; + else + dev->features &= ~NETIF_F_HW_CSUM; + + return 0; +} u32 ethtool_op_get_sg(struct net_device *dev) { return (dev->features & NETIF_F_SG) != 0; @@ -682,6 +691,7 @@ int dev_ethtool(struct ifreq *ifr) void __user *useraddr = ifr->ifr_data; u32 ethcmd; int rc; + unsigned long old_features; /* * XXX: This can be pushed down into the ethtool_* handlers that @@ -703,6 +713,8 @@ int dev_ethtool(struct ifreq *ifr) if ((rc = dev->ethtool_ops->begin(dev)) < 0) return rc; + old_features = dev->features; + switch (ethcmd) { case ETHTOOL_GSET: rc = ethtool_get_settings(dev, useraddr); @@ -712,7 +724,6 @@ int dev_ethtool(struct ifreq *ifr) break; case ETHTOOL_GDRVINFO: rc = ethtool_get_drvinfo(dev, useraddr); - break; case ETHTOOL_GREGS: rc = ethtool_get_regs(dev, useraddr); @@ -801,6 +812,10 @@ int dev_ethtool(struct ifreq *ifr) if(dev->ethtool_ops->complete) dev->ethtool_ops->complete(dev); + + if (old_features != dev->features) + netdev_features_change(dev); + return rc; ioctl: @@ -817,3 +832,4 @@ EXPORT_SYMBOL(ethtool_op_get_tx_csum); EXPORT_SYMBOL(ethtool_op_set_sg); EXPORT_SYMBOL(ethtool_op_set_tso); EXPORT_SYMBOL(ethtool_op_set_tx_csum); +EXPORT_SYMBOL(ethtool_op_set_tx_hw_csum); diff --git a/net/core/net-sysfs.c b/net/core/net-sysfs.c index 060f703659e..910eb4c05a4 100644 --- a/net/core/net-sysfs.c +++ b/net/core/net-sysfs.c @@ -21,6 +21,7 @@ #define to_net_dev(class) container_of(class, struct net_device, class_dev) static const char fmt_hex[] = "%#x\n"; +static const char fmt_long_hex[] = "%#lx\n"; static const char fmt_dec[] = "%d\n"; static const char fmt_ulong[] = "%lu\n"; @@ -91,7 +92,7 @@ static CLASS_DEVICE_ATTR(field, S_IRUGO, show_##field, NULL) \ NETDEVICE_ATTR(addr_len, fmt_dec); NETDEVICE_ATTR(iflink, fmt_dec); NETDEVICE_ATTR(ifindex, fmt_dec); -NETDEVICE_ATTR(features, fmt_hex); +NETDEVICE_ATTR(features, fmt_long_hex); NETDEVICE_ATTR(type, fmt_dec); /* use same locking rules as GIFHWADDR ioctl's */ diff --git a/net/ipv4/devinet.c b/net/ipv4/devinet.c index 3cc96730c4e..478a30179a5 100644 --- a/net/ipv4/devinet.c +++ b/net/ipv4/devinet.c @@ -233,11 +233,14 @@ int inet_addr_onlink(struct in_device *in_dev, u32 a, u32 b) static void inet_del_ifa(struct in_device *in_dev, struct in_ifaddr **ifap, int destroy) { + struct in_ifaddr *promote = NULL; struct in_ifaddr *ifa1 = *ifap; ASSERT_RTNL(); - /* 1. Deleting primary ifaddr forces deletion all secondaries */ + /* 1. Deleting primary ifaddr forces deletion all secondaries + * unless alias promotion is set + **/ if (!(ifa1->ifa_flags & IFA_F_SECONDARY)) { struct in_ifaddr *ifa; @@ -251,11 +254,16 @@ static void inet_del_ifa(struct in_device *in_dev, struct in_ifaddr **ifap, continue; } - *ifap1 = ifa->ifa_next; + if (!IN_DEV_PROMOTE_SECONDARIES(in_dev)) { + *ifap1 = ifa->ifa_next; - rtmsg_ifa(RTM_DELADDR, ifa); - notifier_call_chain(&inetaddr_chain, NETDEV_DOWN, ifa); - inet_free_ifa(ifa); + rtmsg_ifa(RTM_DELADDR, ifa); + notifier_call_chain(&inetaddr_chain, NETDEV_DOWN, ifa); + inet_free_ifa(ifa); + } else { + promote = ifa; + break; + } } } @@ -281,6 +289,13 @@ static void inet_del_ifa(struct in_device *in_dev, struct in_ifaddr **ifap, if (!in_dev->ifa_list) inetdev_destroy(in_dev); } + + if (promote && IN_DEV_PROMOTE_SECONDARIES(in_dev)) { + /* not sure if we should send a delete notify first? */ + promote->ifa_flags &= ~IFA_F_SECONDARY; + rtmsg_ifa(RTM_NEWADDR, promote); + notifier_call_chain(&inetaddr_chain, NETDEV_UP, promote); + } } static int inet_insert_ifa(struct in_ifaddr *ifa) @@ -1384,6 +1399,15 @@ static struct devinet_sysctl_table { .proc_handler = &ipv4_doint_and_flush, .strategy = &ipv4_doint_and_flush_strategy, }, + { + .ctl_name = NET_IPV4_CONF_PROMOTE_SECONDARIES, + .procname = "promote_secondaries", + .data = &ipv4_devconf.promote_secondaries, + .maxlen = sizeof(int), + .mode = 0644, + .proc_handler = &ipv4_doint_and_flush, + .strategy = &ipv4_doint_and_flush_strategy, + }, }, .devinet_dev = { { diff --git a/net/ipv4/esp4.c b/net/ipv4/esp4.c index 053a883247b..eae84cc39d3 100644 --- a/net/ipv4/esp4.c +++ b/net/ipv4/esp4.c @@ -478,7 +478,7 @@ static int __init esp4_init(void) { struct xfrm_decap_state decap; - if (sizeof(struct esp_decap_data) < + if (sizeof(struct esp_decap_data) > sizeof(decap.decap_data)) { extern void decap_data_too_small(void); diff --git a/net/ipv4/multipath_drr.c b/net/ipv4/multipath_drr.c index 9349686131f..cf2e6bcf797 100644 --- a/net/ipv4/multipath_drr.c +++ b/net/ipv4/multipath_drr.c @@ -57,7 +57,6 @@ struct multipath_device { static struct multipath_device state[MULTIPATH_MAX_DEVICECANDIDATES]; static DEFINE_SPINLOCK(state_lock); -static struct rtable *last_selection = NULL; static int inline __multipath_findslot(void) { @@ -111,11 +110,6 @@ struct notifier_block drr_dev_notifier = { .notifier_call = drr_dev_event, }; -static void drr_remove(struct rtable *rt) -{ - if (last_selection == rt) - last_selection = NULL; -} static void drr_safe_inc(atomic_t *usecount) { @@ -144,14 +138,6 @@ static void drr_select_route(const struct flowi *flp, int devidx = -1; int cur_min_devidx = -1; - /* if necessary and possible utilize the old alternative */ - if ((flp->flags & FLOWI_FLAG_MULTIPATHOLDROUTE) != 0 && - last_selection != NULL) { - result = last_selection; - *rp = result; - return; - } - /* 1. make sure all alt. nexthops have the same GC related data */ /* 2. determine the new candidate to be returned */ result = NULL; @@ -229,12 +215,10 @@ static void drr_select_route(const struct flowi *flp, } *rp = result; - last_selection = result; } static struct ip_mp_alg_ops drr_ops = { .mp_alg_select_route = drr_select_route, - .mp_alg_remove = drr_remove, }; static int __init drr_init(void) @@ -244,7 +228,7 @@ static int __init drr_init(void) if (err) return err; - err = multipath_alg_register(&drr_ops, IP_MP_ALG_RR); + err = multipath_alg_register(&drr_ops, IP_MP_ALG_DRR); if (err) goto fail; diff --git a/net/ipv4/multipath_rr.c b/net/ipv4/multipath_rr.c index 554a8256816..061b6b25398 100644 --- a/net/ipv4/multipath_rr.c +++ b/net/ipv4/multipath_rr.c @@ -47,29 +47,12 @@ #include <net/checksum.h> #include <net/ip_mp_alg.h> -#define MULTIPATH_MAX_CANDIDATES 40 - -static struct rtable* last_used = NULL; - -static void rr_remove(struct rtable *rt) -{ - if (last_used == rt) - last_used = NULL; -} - static void rr_select_route(const struct flowi *flp, struct rtable *first, struct rtable **rp) { struct rtable *nh, *result, *min_use_cand = NULL; int min_use = -1; - /* if necessary and possible utilize the old alternative */ - if ((flp->flags & FLOWI_FLAG_MULTIPATHOLDROUTE) != 0 && - last_used != NULL) { - result = last_used; - goto out; - } - /* 1. make sure all alt. nexthops have the same GC related data * 2. determine the new candidate to be returned */ @@ -90,15 +73,12 @@ static void rr_select_route(const struct flowi *flp, if (!result) result = first; -out: - last_used = result; result->u.dst.__use++; *rp = result; } static struct ip_mp_alg_ops rr_ops = { .mp_alg_select_route = rr_select_route, - .mp_alg_remove = rr_remove, }; static int __init rr_init(void) diff --git a/net/ipv4/netfilter/ip_queue.c b/net/ipv4/netfilter/ip_queue.c index e5746b67441..eda1fba431a 100644 --- a/net/ipv4/netfilter/ip_queue.c +++ b/net/ipv4/netfilter/ip_queue.c @@ -3,6 +3,7 @@ * communicating with userspace via netlink. * * (C) 2000-2002 James Morris <jmorris@intercode.com.au> + * (C) 2003-2005 Netfilter Core Team <coreteam@netfilter.org> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -17,6 +18,7 @@ * 2005-01-10: Added /proc counter for dropped packets; fixed so * packets aren't delivered to user space if they're going * to be dropped. + * 2005-05-26: local_bh_{disable,enable} around nf_reinject (Harald Welte) * */ #include <linux/module.h> @@ -71,7 +73,15 @@ static DECLARE_MUTEX(ipqnl_sem); static void ipq_issue_verdict(struct ipq_queue_entry *entry, int verdict) { + /* TCP input path (and probably other bits) assume to be called + * from softirq context, not from syscall, like ipq_issue_verdict is + * called. TCP input path deadlocks with locks taken from timer + * softirq, e.g. We therefore emulate this by local_bh_disable() */ + + local_bh_disable(); nf_reinject(entry->skb, entry->info, verdict); + local_bh_enable(); + kfree(entry); } diff --git a/net/ipv4/udp.c b/net/ipv4/udp.c index 4a6952e3fee..7c24e64b443 100644 --- a/net/ipv4/udp.c +++ b/net/ipv4/udp.c @@ -738,7 +738,7 @@ int udp_ioctl(struct sock *sk, int cmd, unsigned long arg) unsigned long amount; amount = 0; - spin_lock_irq(&sk->sk_receive_queue.lock); + spin_lock_bh(&sk->sk_receive_queue.lock); skb = skb_peek(&sk->sk_receive_queue); if (skb != NULL) { /* @@ -748,7 +748,7 @@ int udp_ioctl(struct sock *sk, int cmd, unsigned long arg) */ amount = skb->len - sizeof(struct udphdr); } - spin_unlock_irq(&sk->sk_receive_queue.lock); + spin_unlock_bh(&sk->sk_receive_queue.lock); return put_user(amount, (int __user *)arg); } @@ -848,12 +848,12 @@ csum_copy_err: /* Clear queue. */ if (flags&MSG_PEEK) { int clear = 0; - spin_lock_irq(&sk->sk_receive_queue.lock); + spin_lock_bh(&sk->sk_receive_queue.lock); if (skb == skb_peek(&sk->sk_receive_queue)) { __skb_unlink(skb, &sk->sk_receive_queue); clear = 1; } - spin_unlock_irq(&sk->sk_receive_queue.lock); + spin_unlock_bh(&sk->sk_receive_queue.lock); if (clear) kfree_skb(skb); } @@ -1334,7 +1334,7 @@ unsigned int udp_poll(struct file *file, struct socket *sock, poll_table *wait) struct sk_buff_head *rcvq = &sk->sk_receive_queue; struct sk_buff *skb; - spin_lock_irq(&rcvq->lock); + spin_lock_bh(&rcvq->lock); while ((skb = skb_peek(rcvq)) != NULL) { if (udp_checksum_complete(skb)) { UDP_INC_STATS_BH(UDP_MIB_INERRORS); @@ -1345,7 +1345,7 @@ unsigned int udp_poll(struct file *file, struct socket *sock, poll_table *wait) break; } } - spin_unlock_irq(&rcvq->lock); + spin_unlock_bh(&rcvq->lock); /* nothing to see, move along */ if (skb == NULL) diff --git a/net/ipv6/ip6_flowlabel.c b/net/ipv6/ip6_flowlabel.c index a93f6dc5197..0e5f7499deb 100644 --- a/net/ipv6/ip6_flowlabel.c +++ b/net/ipv6/ip6_flowlabel.c @@ -535,10 +535,12 @@ release: if (err) goto done; - /* Do not check for fault */ - if (!freq.flr_label) - copy_to_user(&((struct in6_flowlabel_req __user *) optval)->flr_label, - &fl->label, sizeof(fl->label)); + if (!freq.flr_label) { + if (copy_to_user(&((struct in6_flowlabel_req __user *) optval)->flr_label, + &fl->label, sizeof(fl->label))) { + /* Intentionally ignore fault. */ + } + } sfl1->fl = fl; sfl1->next = np->ipv6_fl_list; diff --git a/net/sched/sch_dsmark.c b/net/sched/sch_dsmark.c index 8a3db9d95ba..d8bd2a569c7 100644 --- a/net/sched/sch_dsmark.c +++ b/net/sched/sch_dsmark.c @@ -18,7 +18,7 @@ #include <asm/byteorder.h> -#if 1 /* control */ +#if 0 /* control */ #define DPRINTK(format,args...) printk(KERN_DEBUG format,##args) #else #define DPRINTK(format,args...) @@ -73,8 +73,13 @@ static int dsmark_graft(struct Qdisc *sch,unsigned long arg, DPRINTK("dsmark_graft(sch %p,[qdisc %p],new %p,old %p)\n",sch,p,new, old); - if (!new) - new = &noop_qdisc; + + if (new == NULL) { + new = qdisc_create_dflt(sch->dev, &pfifo_qdisc_ops); + if (new == NULL) + new = &noop_qdisc; + } + sch_tree_lock(sch); *old = xchg(&p->q,new); if (*old) @@ -163,14 +168,15 @@ static void dsmark_walk(struct Qdisc *sch,struct qdisc_walker *walker) return; for (i = 0; i < p->indices; i++) { if (p->mask[i] == 0xff && !p->value[i]) - continue; + goto ignore; if (walker->count >= walker->skip) { if (walker->fn(sch, i+1, walker) < 0) { walker->stop = 1; break; } } - walker->count++; +ignore: + walker->count++; } } diff --git a/sound/oss/Kconfig b/sound/oss/Kconfig index a9602f89d6b..e537bd66a70 100644 --- a/sound/oss/Kconfig +++ b/sound/oss/Kconfig @@ -112,7 +112,7 @@ config SOUND_BCM_CS4297A config SOUND_ES1370 tristate "Ensoniq AudioPCI (ES1370)" - depends on SOUND_PRIME!=n && SOUND && PCI && SOUND_GAMEPORT + depends on SOUND_PRIME!=n && SOUND && PCI help Say Y or M if you have a PCI sound card utilizing the Ensoniq ES1370 chipset, such as Ensoniq's AudioPCI (non-97). To find @@ -125,7 +125,7 @@ config SOUND_ES1370 config SOUND_ES1371 tristate "Creative Ensoniq AudioPCI 97 (ES1371)" - depends on SOUND_PRIME!=n && SOUND && PCI && SOUND_GAMEPORT + depends on SOUND_PRIME!=n && SOUND && PCI help Say Y or M if you have a PCI sound card utilizing the Ensoniq ES1371 chipset, such as Ensoniq's AudioPCI97. To find out if @@ -138,7 +138,7 @@ config SOUND_ES1371 config SOUND_ESSSOLO1 tristate "ESS Technology Solo1" - depends on SOUND_PRIME!=n && SOUND && SOUND_GAMEPORT && PCI + depends on SOUND_PRIME!=n && SOUND && PCI help Say Y or M if you have a PCI sound card utilizing the ESS Technology Solo1 chip. To find out if your sound card uses a @@ -179,7 +179,7 @@ config SOUND_HARMONY config SOUND_SONICVIBES tristate "S3 SonicVibes" - depends on SOUND_PRIME!=n && SOUND && SOUND_GAMEPORT + depends on SOUND_PRIME!=n && SOUND help Say Y or M if you have a PCI sound card utilizing the S3 SonicVibes chipset. To find out if your sound card uses a @@ -226,7 +226,7 @@ config SOUND_AU1550_AC97 config SOUND_TRIDENT tristate "Trident 4DWave DX/NX, SiS 7018 or ALi 5451 PCI Audio Core" - depends on SOUND_PRIME!=n && SOUND && SOUND_GAMEPORT + depends on SOUND_PRIME!=n && SOUND ---help--- Say Y or M if you have a PCI sound card utilizing the Trident 4DWave-DX/NX chipset or your mother board chipset has SiS 7018 @@ -739,7 +739,7 @@ config SOUND_NM256 config SOUND_MAD16 tristate "OPTi MAD16 and/or Mozart based cards" - depends on SOUND_OSS && SOUND_GAMEPORT + depends on SOUND_OSS ---help--- Answer Y if your card has a Mozart (OAK OTI-601) or MAD16 (OPTi 82C928 or 82C929 or 82C931) audio interface chip. These chips are diff --git a/sound/ppc/pmac.c b/sound/ppc/pmac.c index 32d94754acf..080ef392846 100644 --- a/sound/ppc/pmac.c +++ b/sound/ppc/pmac.c @@ -876,7 +876,7 @@ static void __init detect_byte_swap(pmac_t *chip) */ static int __init snd_pmac_detect(pmac_t *chip) { - struct device_node *sound; + struct device_node *sound = NULL; unsigned int *prop, l; struct macio_chip* macio; @@ -906,20 +906,22 @@ static int __init snd_pmac_detect(pmac_t *chip) chip->is_pbook_G3 = 1; chip->node = find_devices("awacs"); if (chip->node) - return 0; /* ok */ + sound = chip->node; /* * powermac G3 models have a node called "davbus" * with a child called "sound". */ - chip->node = find_devices("davbus"); + if (!chip->node) + chip->node = find_devices("davbus"); /* * if we didn't find a davbus device, try 'i2s-a' since * this seems to be what iBooks have */ if (! chip->node) { chip->node = find_devices("i2s-a"); - if (chip->node && chip->node->parent && chip->node->parent->parent) { + if (chip->node && chip->node->parent && + chip->node->parent->parent) { if (device_is_compatible(chip->node->parent->parent, "K2-Keylargo")) chip->is_k2 = 1; @@ -928,9 +930,11 @@ static int __init snd_pmac_detect(pmac_t *chip) if (! chip->node) return -ENODEV; - sound = find_devices("sound"); - while (sound && sound->parent != chip->node) - sound = sound->next; + if (!sound) { + sound = find_devices("sound"); + while (sound && sound->parent != chip->node) + sound = sound->next; + } if (! sound) return -ENODEV; prop = (unsigned int *) get_property(sound, "sub-frame", NULL); @@ -1019,7 +1023,8 @@ static int __init snd_pmac_detect(pmac_t *chip) } } if (chip->pdev == NULL) - printk(KERN_WARNING "snd-powermac: can't locate macio PCI device !\n"); + printk(KERN_WARNING "snd-powermac: can't locate macio PCI" + " device !\n"); detect_byte_swap(chip); @@ -1027,7 +1032,8 @@ static int __init snd_pmac_detect(pmac_t *chip) are available */ prop = (unsigned int *) get_property(sound, "sample-rates", &l); if (! prop) - prop = (unsigned int *) get_property(sound, "output-frame-rates", &l); + prop = (unsigned int *) get_property(sound, + "output-frame-rates", &l); if (prop) { int i; chip->freqs_ok = 0; @@ -1054,7 +1060,8 @@ static int __init snd_pmac_detect(pmac_t *chip) /* * exported - boolean info callbacks for ease of programming */ -int snd_pmac_boolean_stereo_info(snd_kcontrol_t *kcontrol, snd_ctl_elem_info_t *uinfo) +int snd_pmac_boolean_stereo_info(snd_kcontrol_t *kcontrol, + snd_ctl_elem_info_t *uinfo) { uinfo->type = SNDRV_CTL_ELEM_TYPE_BOOLEAN; uinfo->count = 2; @@ -1063,7 +1070,8 @@ int snd_pmac_boolean_stereo_info(snd_kcontrol_t *kcontrol, snd_ctl_elem_info_t * return 0; } -int snd_pmac_boolean_mono_info(snd_kcontrol_t *kcontrol, snd_ctl_elem_info_t *uinfo) +int snd_pmac_boolean_mono_info(snd_kcontrol_t *kcontrol, + snd_ctl_elem_info_t *uinfo) { uinfo->type = SNDRV_CTL_ELEM_TYPE_BOOLEAN; uinfo->count = 1; |