diff options
30 files changed, 269 insertions, 316 deletions
diff --git a/Documentation/DocBook/networking.tmpl b/Documentation/DocBook/networking.tmpl index 59ad69a9d77..29df25016c7 100644 --- a/Documentation/DocBook/networking.tmpl +++ b/Documentation/DocBook/networking.tmpl @@ -56,7 +56,7 @@ !Enet/core/filter.c </sect1> <sect1><title>Generic Network Statistics</title> -!Iinclude/linux/gen_stats.h +!Iinclude/uapi/linux/gen_stats.h !Enet/core/gen_stats.c !Enet/core/gen_estimator.c </sect1> @@ -80,7 +80,7 @@ !Enet/wimax/op-rfkill.c !Enet/wimax/stack.c !Iinclude/net/wimax.h -!Iinclude/linux/wimax.h +!Iinclude/uapi/linux/wimax.h </sect1> </chapter> diff --git a/Documentation/IPMI.txt b/Documentation/IPMI.txt index b2bea15137d..16eb4c9e923 100644 --- a/Documentation/IPMI.txt +++ b/Documentation/IPMI.txt @@ -42,13 +42,7 @@ The driver interface depends on your hardware. If your system properly provides the SMBIOS info for IPMI, the driver will detect it and just work. If you have a board with a standard interface (These will generally be either "KCS", "SMIC", or "BT", consult your hardware -manual), choose the 'IPMI SI handler' option. A driver also exists -for direct I2C access to the IPMI management controller. Some boards -support this, but it is unknown if it will work on every board. For -this, choose 'IPMI SMBus handler', but be ready to try to do some -figuring to see if it will work on your system if the SMBIOS/APCI -information is wrong or not present. It is fairly safe to have both -these enabled and let the drivers auto-detect what is present. +manual), choose the 'IPMI SI handler' option. You should generally enable ACPI on your system, as systems with IPMI can have ACPI tables describing them. @@ -58,8 +52,7 @@ their job correctly, the IPMI controller should be automatically detected (via ACPI or SMBIOS tables) and should just work. Sadly, many boards do not have this information. The driver attempts standard defaults, but they may not work. If you fall into this -situation, you need to read the section below named 'The SI Driver' or -"The SMBus Driver" on how to hand-configure your system. +situation, you need to read the section below named 'The SI Driver'. IPMI defines a standard watchdog timer. You can enable this with the 'IPMI Watchdog Timer' config option. If you compile the driver into @@ -104,12 +97,7 @@ driver, each open file for this device ties in to the message handler as an IPMI user. ipmi_si - A driver for various system interfaces. This supports KCS, -SMIC, and BT interfaces. Unless you have an SMBus interface or your -own custom interface, you probably need to use this. - -ipmi_smb - A driver for accessing BMCs on the SMBus. It uses the -I2C kernel driver's SMBus interfaces to send and receive IPMI messages -over the SMBus. +SMIC, and BT interfaces. ipmi_watchdog - IPMI requires systems to have a very capable watchdog timer. This driver implements the standard Linux watchdog timer @@ -482,53 +470,6 @@ for specifying an interface. Note that when removing an interface, only the first three parameters (si type, address type, and address) are used for the comparison. Any options are ignored for removing. -The SMBus Driver ----------------- - -The SMBus driver allows up to 4 SMBus devices to be configured in the -system. By default, the driver will register any SMBus interfaces it finds -in the I2C address range of 0x20 to 0x4f on any adapter. You can change this -at module load time (for a module) with: - - modprobe ipmi_smb.o - addr=<adapter1>,<i2caddr1>[,<adapter2>,<i2caddr2>[,...]] - dbg=<flags1>,<flags2>... - [defaultprobe=1] [dbg_probe=1] - -The addresses are specified in pairs, the first is the adapter ID and the -second is the I2C address on that adapter. - -The debug flags are bit flags for each BMC found, they are: -IPMI messages: 1, driver state: 2, timing: 4, I2C probe: 8 - -Setting smb_defaultprobe to zero disabled the default probing of SMBus -interfaces at address range 0x20 to 0x4f. This means that only the -BMCs specified on the smb_addr line will be detected. - -Setting smb_dbg_probe to 1 will enable debugging of the probing and -detection process for BMCs on the SMBusses. - -Discovering the IPMI compliant BMC on the SMBus can cause devices -on the I2C bus to fail. The SMBus driver writes a "Get Device ID" IPMI -message as a block write to the I2C bus and waits for a response. -This action can be detrimental to some I2C devices. It is highly recommended -that the known I2c address be given to the SMBus driver in the smb_addr -parameter. The default address range will not be used when a smb_addr -parameter is provided. - -When compiled into the kernel, the addresses can be specified on the -kernel command line as: - - ipmb_smb.addr=<adapter1>,<i2caddr1>[,<adapter2>,<i2caddr2>[,...]] - ipmi_smb.dbg=<flags1>,<flags2>... - ipmi_smb.defaultprobe=0 ipmi_smb.dbg_probe=1 - -These are the same options as on the module command line. - -Note that you might need some I2C changes if CONFIG_IPMI_PANIC_EVENT -is enabled along with this, so the I2C driver knows to run to -completion during sending a panic event. - Other Pieces ------------ diff --git a/MAINTAINERS b/MAINTAINERS index e73060fe078..e39e9da359a 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -4372,7 +4372,7 @@ F: Documentation/scsi/53c700.txt F: drivers/scsi/53c700* LED SUBSYSTEM -M: Bryan Wu <bryan.wu@canonical.com> +M: Bryan Wu <cooloney@gmail.com> M: Richard Purdie <rpurdie@rpsys.net> L: linux-leds@vger.kernel.org T: git git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/linux-leds.git diff --git a/arch/arm/kernel/entry-common.S b/arch/arm/kernel/entry-common.S index 417bac1846b..34711757ba5 100644 --- a/arch/arm/kernel/entry-common.S +++ b/arch/arm/kernel/entry-common.S @@ -88,9 +88,9 @@ ENTRY(ret_from_fork) bl schedule_tail cmp r5, #0 movne r0, r4 - movne lr, pc + adrne lr, BSYM(1f) movne pc, r5 - get_thread_info tsk +1: get_thread_info tsk b ret_slow_syscall ENDPROC(ret_from_fork) diff --git a/arch/arm/mach-prima2/include/mach/gpio.h b/arch/arm/mach-prima2/include/mach/gpio.h deleted file mode 100644 index 1904bb03876..00000000000 --- a/arch/arm/mach-prima2/include/mach/gpio.h +++ /dev/null @@ -1,13 +0,0 @@ -#ifndef __MACH_GPIO_H -#define __MACH_GPIO_H - -/* Pull up/down values */ -enum sirfsoc_gpio_pull { - SIRFSOC_GPIO_PULL_NONE, - SIRFSOC_GPIO_PULL_UP, - SIRFSOC_GPIO_PULL_DOWN, -}; - -void sirfsoc_gpio_set_pull(unsigned gpio, unsigned mode); - -#endif diff --git a/arch/x86/Makefile b/arch/x86/Makefile index 58790bd85c1..05afcca66de 100644 --- a/arch/x86/Makefile +++ b/arch/x86/Makefile @@ -142,7 +142,7 @@ KBUILD_CFLAGS += $(call cc-option,-mno-avx,) KBUILD_CFLAGS += $(mflags-y) KBUILD_AFLAGS += $(mflags-y) -archscripts: +archscripts: scripts_basic $(Q)$(MAKE) $(build)=arch/x86/tools relocs ### diff --git a/drivers/Makefile b/drivers/Makefile index 03da5b663ae..a16a8d001ae 100644 --- a/drivers/Makefile +++ b/drivers/Makefile @@ -17,6 +17,10 @@ obj-$(CONFIG_PARISC) += parisc/ obj-$(CONFIG_RAPIDIO) += rapidio/ obj-y += video/ obj-y += idle/ + +# IPMI must come before ACPI in order to provide IPMI opregion support +obj-$(CONFIG_IPMI_HANDLER) += char/ipmi/ + obj-$(CONFIG_ACPI) += acpi/ obj-$(CONFIG_SFI) += sfi/ # PnP must come after ACPI since it will eventually need to check if acpi diff --git a/drivers/acpi/Makefile b/drivers/acpi/Makefile index 47199e2a913..82422fe90f8 100644 --- a/drivers/acpi/Makefile +++ b/drivers/acpi/Makefile @@ -47,6 +47,10 @@ acpi-y += video_detect.o endif # These are (potentially) separate modules + +# IPMI may be used by other drivers, so it has to initialise before them +obj-$(CONFIG_ACPI_IPMI) += acpi_ipmi.o + obj-$(CONFIG_ACPI_AC) += ac.o obj-$(CONFIG_ACPI_BUTTON) += button.o obj-$(CONFIG_ACPI_FAN) += fan.o @@ -70,6 +74,5 @@ processor-y += processor_idle.o processor_thermal.o processor-$(CONFIG_CPU_FREQ) += processor_perflib.o obj-$(CONFIG_ACPI_PROCESSOR_AGGREGATOR) += acpi_pad.o -obj-$(CONFIG_ACPI_IPMI) += acpi_ipmi.o obj-$(CONFIG_ACPI_APEI) += apei/ diff --git a/drivers/char/Makefile b/drivers/char/Makefile index d0b27a39f1d..7ff1d0d208a 100644 --- a/drivers/char/Makefile +++ b/drivers/char/Makefile @@ -52,7 +52,6 @@ obj-$(CONFIG_TELCLOCK) += tlclk.o obj-$(CONFIG_MWAVE) += mwave/ obj-$(CONFIG_AGP) += agp/ obj-$(CONFIG_PCMCIA) += pcmcia/ -obj-$(CONFIG_IPMI_HANDLER) += ipmi/ obj-$(CONFIG_HANGCHECK_TIMER) += hangcheck-timer.o obj-$(CONFIG_TCG_TPM) += tpm/ diff --git a/drivers/char/ipmi/ipmi_msghandler.c b/drivers/char/ipmi/ipmi_msghandler.c index 2c29942b132..a0c84bb3085 100644 --- a/drivers/char/ipmi/ipmi_msghandler.c +++ b/drivers/char/ipmi/ipmi_msghandler.c @@ -1880,7 +1880,7 @@ int ipmi_request_supply_msgs(ipmi_user_t user, struct ipmi_recv_msg *supplied_recv, int priority) { - unsigned char saddr, lun; + unsigned char saddr = 0, lun = 0; int rv; if (!user) diff --git a/drivers/char/ipmi/ipmi_si_intf.c b/drivers/char/ipmi/ipmi_si_intf.c index 83f85cf7fb1..32a6c7e256b 100644 --- a/drivers/char/ipmi/ipmi_si_intf.c +++ b/drivers/char/ipmi/ipmi_si_intf.c @@ -2424,6 +2424,38 @@ static void ipmi_pci_cleanup(struct smi_info *info) pci_disable_device(pdev); } +static int __devinit ipmi_pci_probe_regspacing(struct smi_info *info) +{ + if (info->si_type == SI_KCS) { + unsigned char status; + int regspacing; + + info->io.regsize = DEFAULT_REGSIZE; + info->io.regshift = 0; + info->io_size = 2; + info->handlers = &kcs_smi_handlers; + + /* detect 1, 4, 16byte spacing */ + for (regspacing = DEFAULT_REGSPACING; regspacing <= 16;) { + info->io.regspacing = regspacing; + if (info->io_setup(info)) { + dev_err(info->dev, + "Could not setup I/O space\n"); + return DEFAULT_REGSPACING; + } + /* write invalid cmd */ + info->io.outputb(&info->io, 1, 0x10); + /* read status back */ + status = info->io.inputb(&info->io, 1); + info->io_cleanup(info); + if (status) + return regspacing; + regspacing *= 4; + } + } + return DEFAULT_REGSPACING; +} + static int __devinit ipmi_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent) { @@ -2476,8 +2508,8 @@ static int __devinit ipmi_pci_probe(struct pci_dev *pdev, } info->io.addr_data = pci_resource_start(pdev, 0); - info->io.regspacing = DEFAULT_REGSPACING; - info->io.regsize = DEFAULT_REGSPACING; + info->io.regspacing = ipmi_pci_probe_regspacing(info); + info->io.regsize = DEFAULT_REGSIZE; info->io.regshift = 0; info->irq = pdev->irq; diff --git a/drivers/pinctrl/pinctrl-bcm2835.c b/drivers/pinctrl/pinctrl-bcm2835.c index a4adee633fa..7e9be18ec2d 100644 --- a/drivers/pinctrl/pinctrl-bcm2835.c +++ b/drivers/pinctrl/pinctrl-bcm2835.c @@ -29,7 +29,6 @@ #include <linux/irq.h> #include <linux/irqdesc.h> #include <linux/irqdomain.h> -#include <linux/irq.h> #include <linux/module.h> #include <linux/of_address.h> #include <linux/of.h> @@ -960,7 +959,7 @@ static int __devinit bcm2835_pinctrl_probe(struct platform_device *pdev) return err; } - pc->base = devm_request_and_ioremap(&pdev->dev, &iomem); + pc->base = devm_request_and_ioremap(dev, &iomem); if (!pc->base) return -EADDRNOTAVAIL; @@ -1032,7 +1031,7 @@ static int __devinit bcm2835_pinctrl_probe(struct platform_device *pdev) pc->pctl_dev = pinctrl_register(&bcm2835_pinctrl_desc, dev, pc); if (!pc->pctl_dev) { gpiochip_remove(&pc->gpio_chip); - return PTR_ERR(pc->pctl_dev); + return -EINVAL; } pc->gpio_range = bcm2835_pinctrl_gpio_range; diff --git a/drivers/pinctrl/pinctrl-nomadik.c b/drivers/pinctrl/pinctrl-nomadik.c index fec9c30133d..01aea1c3b5f 100644 --- a/drivers/pinctrl/pinctrl-nomadik.c +++ b/drivers/pinctrl/pinctrl-nomadik.c @@ -30,7 +30,20 @@ #include <linux/pinctrl/pinconf.h> /* Since we request GPIOs from ourself */ #include <linux/pinctrl/consumer.h> +/* + * For the U8500 archs, use the PRCMU register interface, for the older + * Nomadik, provide some stubs. The functions using these will only be + * called on the U8500 series. + */ +#ifdef CONFIG_ARCH_U8500 #include <linux/mfd/dbx500-prcmu.h> +#else +static inline u32 prcmu_read(unsigned int reg) { + return 0; +} +static inline void prcmu_write(unsigned int reg, u32 value) {} +static inline void prcmu_write_masked(unsigned int reg, u32 mask, u32 value) {} +#endif #include <asm/mach/irq.h> @@ -1268,6 +1281,7 @@ static int __devinit nmk_gpio_probe(struct platform_device *dev) struct clk *clk; int secondary_irq; void __iomem *base; + int irq_start = -1; int irq; int ret; @@ -1371,19 +1385,11 @@ static int __devinit nmk_gpio_probe(struct platform_device *dev) platform_set_drvdata(dev, nmk_chip); - if (np) { - /* The DT case will just grab a set of IRQ numbers */ - nmk_chip->domain = irq_domain_add_linear(np, NMK_GPIO_PER_CHIP, - &nmk_gpio_irq_simple_ops, nmk_chip); - } else { - /* Non-DT legacy mode, use hardwired IRQ numbers */ - int irq_start; - + if (!np) irq_start = NOMADIK_GPIO_TO_IRQ(pdata->first_gpio); - nmk_chip->domain = irq_domain_add_simple(NULL, + nmk_chip->domain = irq_domain_add_simple(NULL, NMK_GPIO_PER_CHIP, irq_start, &nmk_gpio_irq_simple_ops, nmk_chip); - } if (!nmk_chip->domain) { dev_err(&dev->dev, "failed to create irqdomain\n"); ret = -ENOSYS; diff --git a/drivers/pinctrl/pinctrl-samsung.c b/drivers/pinctrl/pinctrl-samsung.c index dd108a94acf..861cd5f04d5 100644 --- a/drivers/pinctrl/pinctrl-samsung.c +++ b/drivers/pinctrl/pinctrl-samsung.c @@ -513,7 +513,7 @@ static int samsung_gpio_direction_output(struct gpio_chip *gc, unsigned offset, * Parse the pin names listed in the 'samsung,pins' property and convert it * into a list of gpio numbers are create a pin group from it. */ -static int __init samsung_pinctrl_parse_dt_pins(struct platform_device *pdev, +static int __devinit samsung_pinctrl_parse_dt_pins(struct platform_device *pdev, struct device_node *cfg_np, struct pinctrl_desc *pctl, unsigned int **pin_list, unsigned int *npins) { @@ -560,7 +560,7 @@ static int __init samsung_pinctrl_parse_dt_pins(struct platform_device *pdev, * from device node of the pin-controller. A pin group is formed with all * the pins listed in the "samsung,pins" property. */ -static int __init samsung_pinctrl_parse_dt(struct platform_device *pdev, +static int __devinit samsung_pinctrl_parse_dt(struct platform_device *pdev, struct samsung_pinctrl_drv_data *drvdata) { struct device *dev = &pdev->dev; @@ -655,7 +655,7 @@ static int __init samsung_pinctrl_parse_dt(struct platform_device *pdev, } /* register the pinctrl interface with the pinctrl subsystem */ -static int __init samsung_pinctrl_register(struct platform_device *pdev, +static int __devinit samsung_pinctrl_register(struct platform_device *pdev, struct samsung_pinctrl_drv_data *drvdata) { struct pinctrl_desc *ctrldesc = &drvdata->pctl; @@ -729,7 +729,7 @@ static int __init samsung_pinctrl_register(struct platform_device *pdev, } /* register the gpiolib interface with the gpiolib subsystem */ -static int __init samsung_gpiolib_register(struct platform_device *pdev, +static int __devinit samsung_gpiolib_register(struct platform_device *pdev, struct samsung_pinctrl_drv_data *drvdata) { struct gpio_chip *gc; @@ -762,7 +762,7 @@ static int __init samsung_gpiolib_register(struct platform_device *pdev, } /* unregister the gpiolib interface with the gpiolib subsystem */ -static int __init samsung_gpiolib_unregister(struct platform_device *pdev, +static int __devinit samsung_gpiolib_unregister(struct platform_device *pdev, struct samsung_pinctrl_drv_data *drvdata) { int ret = gpiochip_remove(drvdata->gc); diff --git a/drivers/pinctrl/pinctrl-sirf.c b/drivers/pinctrl/pinctrl-sirf.c index 675497c1514..9ecacf3d0a7 100644 --- a/drivers/pinctrl/pinctrl-sirf.c +++ b/drivers/pinctrl/pinctrl-sirf.c @@ -1323,41 +1323,6 @@ static inline struct sirfsoc_gpio_bank *sirfsoc_gpio_to_bank(unsigned int gpio) return &sgpio_bank[gpio / SIRFSOC_GPIO_BANK_SIZE]; } -void sirfsoc_gpio_set_pull(unsigned gpio, unsigned mode) -{ - struct sirfsoc_gpio_bank *bank = sirfsoc_gpio_to_bank(gpio); - int idx = sirfsoc_gpio_to_offset(gpio); - u32 val, offset; - unsigned long flags; - - offset = SIRFSOC_GPIO_CTRL(bank->id, idx); - - spin_lock_irqsave(&sgpio_lock, flags); - - val = readl(bank->chip.regs + offset); - - switch (mode) { - case SIRFSOC_GPIO_PULL_NONE: - val &= ~SIRFSOC_GPIO_CTL_PULL_MASK; - break; - case SIRFSOC_GPIO_PULL_UP: - val |= SIRFSOC_GPIO_CTL_PULL_MASK; - val |= SIRFSOC_GPIO_CTL_PULL_HIGH; - break; - case SIRFSOC_GPIO_PULL_DOWN: - val |= SIRFSOC_GPIO_CTL_PULL_MASK; - val &= ~SIRFSOC_GPIO_CTL_PULL_HIGH; - break; - default: - break; - } - - writel(val, bank->chip.regs + offset); - - spin_unlock_irqrestore(&sgpio_lock, flags); -} -EXPORT_SYMBOL(sirfsoc_gpio_set_pull); - static inline struct sirfsoc_gpio_bank *sirfsoc_irqchip_to_bank(struct gpio_chip *chip) { return container_of(to_of_mm_gpio_chip(chip), struct sirfsoc_gpio_bank, chip); diff --git a/drivers/pinctrl/pinctrl-xway.c b/drivers/pinctrl/pinctrl-xway.c index f8d917d40c9..b9bcaec6622 100644 --- a/drivers/pinctrl/pinctrl-xway.c +++ b/drivers/pinctrl/pinctrl-xway.c @@ -17,8 +17,6 @@ #include <linux/ioport.h> #include <linux/io.h> #include <linux/device.h> -#include <linux/module.h> -#include <linux/io.h> #include <linux/platform_device.h> #include "pinctrl-lantiq.h" diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig index edfd67d2501..e1cb6bd75f6 100644 --- a/drivers/thermal/Kconfig +++ b/drivers/thermal/Kconfig @@ -22,6 +22,7 @@ config THERMAL_HWMON config CPU_THERMAL bool "generic cpu cooling support" depends on THERMAL && CPU_FREQ + select CPU_FREQ_TABLE help This implements the generic cpu cooling mechanism through frequency reduction, cpu hotplug and any other ways of reducing temperature. An @@ -50,6 +51,7 @@ config RCAR_THERMAL config EXYNOS_THERMAL tristate "Temperature sensor on Samsung EXYNOS" depends on (ARCH_EXYNOS4 || ARCH_EXYNOS5) && THERMAL + select CPU_FREQ_TABLE help If you say yes here you get support for TMU (Thermal Managment Unit) on SAMSUNG EXYNOS series of SoC. diff --git a/fs/coredump.c b/fs/coredump.c index fd37facac8d..ce47379bfa6 100644 --- a/fs/coredump.c +++ b/fs/coredump.c @@ -450,11 +450,12 @@ static int umh_pipe_setup(struct subprocess_info *info, struct cred *new) cp->file = files[1]; - replace_fd(0, files[0], 0); + err = replace_fd(0, files[0], 0); + fput(files[0]); /* and disallow core files too */ current->signal->rlim[RLIMIT_CORE] = (struct rlimit){1, 1}; - return 0; + return err; } void do_coredump(siginfo_t *siginfo, struct pt_regs *regs) diff --git a/fs/ext2/super.c b/fs/ext2/super.c index 6c205d0c565..fa04d023177 100644 --- a/fs/ext2/super.c +++ b/fs/ext2/super.c @@ -469,7 +469,7 @@ static int parse_options(char *options, struct super_block *sb) uid = make_kuid(current_user_ns(), option); if (!uid_valid(uid)) { ext2_msg(sb, KERN_ERR, "Invalid uid value %d", option); - return -1; + return 0; } sbi->s_resuid = uid; @@ -480,7 +480,7 @@ static int parse_options(char *options, struct super_block *sb) gid = make_kgid(current_user_ns(), option); if (!gid_valid(gid)) { ext2_msg(sb, KERN_ERR, "Invalid gid value %d", option); - return -1; + return 0; } sbi->s_resgid = gid; break; diff --git a/fs/ext3/namei.c b/fs/ext3/namei.c index 8f4fddac01a..890b8947c54 100644 --- a/fs/ext3/namei.c +++ b/fs/ext3/namei.c @@ -46,8 +46,7 @@ static struct buffer_head *ext3_append(handle_t *handle, *block = inode->i_size >> inode->i_sb->s_blocksize_bits; - bh = ext3_bread(handle, inode, *block, 1, err); - if (bh) { + if ((bh = ext3_dir_bread(handle, inode, *block, 1, err))) { inode->i_size += inode->i_sb->s_blocksize; EXT3_I(inode)->i_disksize = inode->i_size; *err = ext3_journal_get_write_access(handle, bh); @@ -339,8 +338,10 @@ dx_probe(struct qstr *entry, struct inode *dir, u32 hash; frame->bh = NULL; - if (!(bh = ext3_bread (NULL,dir, 0, 0, err))) + if (!(bh = ext3_dir_bread(NULL, dir, 0, 0, err))) { + *err = ERR_BAD_DX_DIR; goto fail; + } root = (struct dx_root *) bh->b_data; if (root->info.hash_version != DX_HASH_TEA && root->info.hash_version != DX_HASH_HALF_MD4 && @@ -436,8 +437,10 @@ dx_probe(struct qstr *entry, struct inode *dir, frame->entries = entries; frame->at = at; if (!indirect--) return frame; - if (!(bh = ext3_bread (NULL,dir, dx_get_block(at), 0, err))) + if (!(bh = ext3_dir_bread(NULL, dir, dx_get_block(at), 0, err))) { + *err = ERR_BAD_DX_DIR; goto fail2; + } at = entries = ((struct dx_node *) bh->b_data)->entries; if (dx_get_limit(entries) != dx_node_limit (dir)) { ext3_warning(dir->i_sb, __func__, @@ -535,8 +538,8 @@ static int ext3_htree_next_block(struct inode *dir, __u32 hash, * block so no check is necessary */ while (num_frames--) { - if (!(bh = ext3_bread(NULL, dir, dx_get_block(p->at), - 0, &err))) + if (!(bh = ext3_dir_bread(NULL, dir, dx_get_block(p->at), + 0, &err))) return err; /* Failure */ p++; brelse (p->bh); @@ -559,10 +562,11 @@ static int htree_dirblock_to_tree(struct file *dir_file, { struct buffer_head *bh; struct ext3_dir_entry_2 *de, *top; - int err, count = 0; + int err = 0, count = 0; dxtrace(printk("In htree dirblock_to_tree: block %d\n", block)); - if (!(bh = ext3_bread (NULL, dir, block, 0, &err))) + + if (!(bh = ext3_dir_bread(NULL, dir, block, 0, &err))) return err; de = (struct ext3_dir_entry_2 *) bh->b_data; @@ -976,7 +980,7 @@ static struct buffer_head * ext3_dx_find_entry(struct inode *dir, return NULL; do { block = dx_get_block(frame->at); - if (!(bh = ext3_bread (NULL,dir, block, 0, err))) + if (!(bh = ext3_dir_bread (NULL, dir, block, 0, err))) goto errout; retval = search_dirblock(bh, dir, entry, @@ -1458,9 +1462,9 @@ static int ext3_add_entry (handle_t *handle, struct dentry *dentry, } blocks = dir->i_size >> sb->s_blocksize_bits; for (block = 0; block < blocks; block++) { - bh = ext3_bread(handle, dir, block, 0, &retval); - if(!bh) + if (!(bh = ext3_dir_bread(handle, dir, block, 0, &retval))) return retval; + retval = add_dirent_to_buf(handle, dentry, inode, NULL, bh); if (retval != -ENOSPC) return retval; @@ -1500,7 +1504,7 @@ static int ext3_dx_add_entry(handle_t *handle, struct dentry *dentry, entries = frame->entries; at = frame->at; - if (!(bh = ext3_bread(handle,dir, dx_get_block(frame->at), 0, &err))) + if (!(bh = ext3_dir_bread(handle, dir, dx_get_block(frame->at), 0, &err))) goto cleanup; BUFFER_TRACE(bh, "get_write_access"); @@ -1790,8 +1794,7 @@ retry: inode->i_op = &ext3_dir_inode_operations; inode->i_fop = &ext3_dir_operations; inode->i_size = EXT3_I(inode)->i_disksize = inode->i_sb->s_blocksize; - dir_block = ext3_bread (handle, inode, 0, 1, &err); - if (!dir_block) + if (!(dir_block = ext3_dir_bread(handle, inode, 0, 1, &err))) goto out_clear_inode; BUFFER_TRACE(dir_block, "get_write_access"); @@ -1859,7 +1862,7 @@ static int empty_dir (struct inode * inode) sb = inode->i_sb; if (inode->i_size < EXT3_DIR_REC_LEN(1) + EXT3_DIR_REC_LEN(2) || - !(bh = ext3_bread (NULL, inode, 0, 0, &err))) { + !(bh = ext3_dir_bread(NULL, inode, 0, 0, &err))) { if (err) ext3_error(inode->i_sb, __func__, "error %d reading directory #%lu offset 0", @@ -1890,9 +1893,8 @@ static int empty_dir (struct inode * inode) (void *) de >= (void *) (bh->b_data+sb->s_blocksize)) { err = 0; brelse (bh); - bh = ext3_bread (NULL, inode, - offset >> EXT3_BLOCK_SIZE_BITS(sb), 0, &err); - if (!bh) { + if (!(bh = ext3_dir_bread (NULL, inode, + offset >> EXT3_BLOCK_SIZE_BITS(sb), 0, &err))) { if (err) ext3_error(sb, __func__, "error %d reading directory" @@ -2388,7 +2390,7 @@ static int ext3_rename (struct inode * old_dir, struct dentry *old_dentry, goto end_rename; } retval = -EIO; - dir_bh = ext3_bread (handle, old_inode, 0, 0, &retval); + dir_bh = ext3_dir_bread(handle, old_inode, 0, 0, &retval); if (!dir_bh) goto end_rename; if (le32_to_cpu(PARENT_INO(dir_bh->b_data)) != old_dir->i_ino) diff --git a/fs/ext3/namei.h b/fs/ext3/namei.h index f2ce2b0065c..46304d8c9f0 100644 --- a/fs/ext3/namei.h +++ b/fs/ext3/namei.h @@ -6,3 +6,22 @@ */ extern struct dentry *ext3_get_parent(struct dentry *child); + +static inline struct buffer_head *ext3_dir_bread(handle_t *handle, + struct inode *inode, + int block, int create, + int *err) +{ + struct buffer_head *bh; + + bh = ext3_bread(handle, inode, block, create, err); + + if (!bh && !(*err)) { + *err = -EIO; + ext3_error(inode->i_sb, __func__, + "Directory hole detected on inode %lu\n", + inode->i_ino); + return NULL; + } + return bh; +} diff --git a/fs/ext3/super.c b/fs/ext3/super.c index 29e79713c7e..5366393528d 100644 --- a/fs/ext3/super.c +++ b/fs/ext3/super.c @@ -1001,7 +1001,7 @@ static int parse_options (char *options, struct super_block *sb, uid = make_kuid(current_user_ns(), option); if (!uid_valid(uid)) { ext3_msg(sb, KERN_ERR, "Invalid uid value %d", option); - return -1; + return 0; } sbi->s_resuid = uid; @@ -1012,7 +1012,7 @@ static int parse_options (char *options, struct super_block *sb, gid = make_kgid(current_user_ns(), option); if (!gid_valid(gid)) { ext3_msg(sb, KERN_ERR, "Invalid gid value %d", option); - return -1; + return 0; } sbi->s_resgid = gid; break; diff --git a/fs/proc/task_mmu.c b/fs/proc/task_mmu.c index 79827ce03e3..14df8806ff2 100644 --- a/fs/proc/task_mmu.c +++ b/fs/proc/task_mmu.c @@ -1158,6 +1158,7 @@ static int show_numa_map(struct seq_file *m, void *v, int is_pid) struct vm_area_struct *vma = v; struct numa_maps *md = &numa_priv->md; |