aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--drivers/net/ks8842.c464
-rw-r--r--include/linux/ks8842.h4
2 files changed, 447 insertions, 21 deletions
diff --git a/drivers/net/ks8842.c b/drivers/net/ks8842.c
index 289b0bee346..3fe38c787f2 100644
--- a/drivers/net/ks8842.c
+++ b/drivers/net/ks8842.c
@@ -30,6 +30,9 @@
#include <linux/etherdevice.h>
#include <linux/ethtool.h>
#include <linux/ks8842.h>
+#include <linux/dmaengine.h>
+#include <linux/dma-mapping.h>
+#include <linux/scatterlist.h>
#define DRV_NAME "ks8842"
@@ -82,6 +85,15 @@
#define IRQ_RX_ERROR 0x0080
#define ENABLED_IRQS (IRQ_LINK_CHANGE | IRQ_TX | IRQ_RX | IRQ_RX_STOPPED | \
IRQ_TX_STOPPED | IRQ_RX_OVERRUN | IRQ_RX_ERROR)
+/* When running via timberdale in DMA mode, the RX interrupt should be
+ enabled in the KS8842, but not in the FPGA IP, since the IP handles
+ RX DMA internally.
+ TX interrupts are not needed it is handled by the FPGA the driver is
+ notified via DMA callbacks.
+*/
+#define ENABLED_IRQS_DMA_IP (IRQ_LINK_CHANGE | IRQ_RX_STOPPED | \
+ IRQ_TX_STOPPED | IRQ_RX_OVERRUN | IRQ_RX_ERROR)
+#define ENABLED_IRQS_DMA (ENABLED_IRQS_DMA_IP | IRQ_RX)
#define REG_ISR 0x02
#define REG_RXSR 0x04
#define RXSR_VALID 0x8000
@@ -124,6 +136,28 @@
#define MICREL_KS884X 0x01 /* 0=Timeberdale(FPGA), 1=Micrel */
#define KS884X_16BIT 0x02 /* 1=16bit, 0=32bit */
+#define DMA_BUFFER_SIZE 2048
+
+struct ks8842_tx_dma_ctl {
+ struct dma_chan *chan;
+ struct dma_async_tx_descriptor *adesc;
+ void *buf;
+ struct scatterlist sg;
+ int channel;
+};
+
+struct ks8842_rx_dma_ctl {
+ struct dma_chan *chan;
+ struct dma_async_tx_descriptor *adesc;
+ struct sk_buff *skb;
+ struct scatterlist sg;
+ struct tasklet_struct tasklet;
+ int channel;
+};
+
+#define KS8842_USE_DMA(adapter) (((adapter)->dma_tx.channel != -1) && \
+ ((adapter)->dma_rx.channel != -1))
+
struct ks8842_adapter {
void __iomem *hw_addr;
int irq;
@@ -132,8 +166,19 @@ struct ks8842_adapter {
spinlock_t lock; /* spinlock to be interrupt safe */
struct work_struct timeout_work;
struct net_device *netdev;
+ struct device *dev;
+ struct ks8842_tx_dma_ctl dma_tx;
+ struct ks8842_rx_dma_ctl dma_rx;
};
+static void ks8842_dma_rx_cb(void *data);
+static void ks8842_dma_tx_cb(void *data);
+
+static inline void ks8842_resume_dma(struct ks8842_adapter *adapter)
+{
+ iowrite32(1, adapter->hw_addr + REQ_TIMB_DMA_RESUME);
+}
+
static inline void ks8842_select_bank(struct ks8842_adapter *adapter, u16 bank)
{
iowrite16(bank, adapter->hw_addr + REG_SELECT_BANK);
@@ -297,8 +342,19 @@ static void ks8842_reset_hw(struct ks8842_adapter *adapter)
ks8842_write16(adapter, 18, 0xffff, REG_ISR);
/* enable interrupts */
- ks8842_write16(adapter, 18, ENABLED_IRQS, REG_IER);
-
+ if (KS8842_USE_DMA(adapter)) {
+ /* When running in DMA Mode the RX interrupt is not enabled in
+ timberdale because RX data is received by DMA callbacks
+ it must still be enabled in the KS8842 because it indicates
+ to timberdale when there is RX data for it's DMA FIFOs */
+ iowrite16(ENABLED_IRQS_DMA_IP, adapter->hw_addr + REG_TIMB_IER);
+ ks8842_write16(adapter, 18, ENABLED_IRQS_DMA, REG_IER);
+ } else {
+ if (!(adapter->conf_flags & MICREL_KS884X))
+ iowrite16(ENABLED_IRQS,
+ adapter->hw_addr + REG_TIMB_IER);
+ ks8842_write16(adapter, 18, ENABLED_IRQS, REG_IER);
+ }
/* enable the switch */
ks8842_write16(adapter, 32, 0x1, REG_SW_ID_AND_ENABLE);
}
@@ -371,6 +427,53 @@ static inline u16 ks8842_tx_fifo_space(struct ks8842_adapter *adapter)
return ks8842_read16(adapter, 16, REG_TXMIR) & 0x1fff;
}
+static int ks8842_tx_frame_dma(struct sk_buff *skb, struct net_device *netdev)
+{
+ struct ks8842_adapter *adapter = netdev_priv(netdev);
+ struct ks8842_tx_dma_ctl *ctl = &adapter->dma_tx;
+ u8 *buf = ctl->buf;
+
+ if (ctl->adesc) {
+ netdev_dbg(netdev, "%s: TX ongoing\n", __func__);
+ /* transfer ongoing */
+ return NETDEV_TX_BUSY;
+ }
+
+ sg_dma_len(&ctl->sg) = skb->len + sizeof(u32);
+
+ /* copy data to the TX buffer */
+ /* the control word, enable IRQ, port 1 and the length */
+ *buf++ = 0x00;
+ *buf++ = 0x01; /* Port 1 */
+ *buf++ = skb->len & 0xff;
+ *buf++ = (skb->len >> 8) & 0xff;
+ skb_copy_from_linear_data(skb, buf, skb->len);
+
+ dma_sync_single_range_for_device(adapter->dev,
+ sg_dma_address(&ctl->sg), 0, sg_dma_len(&ctl->sg),
+ DMA_TO_DEVICE);
+
+ /* make sure the length is a multiple of 4 */
+ if (sg_dma_len(&ctl->sg) % 4)
+ sg_dma_len(&ctl->sg) += 4 - sg_dma_len(&ctl->sg) % 4;
+
+ ctl->adesc = ctl->chan->device->device_prep_slave_sg(ctl->chan,
+ &ctl->sg, 1, DMA_TO_DEVICE,
+ DMA_PREP_INTERRUPT | DMA_COMPL_SKIP_SRC_UNMAP);
+ if (!ctl->adesc)
+ return NETDEV_TX_BUSY;
+
+ ctl->adesc->callback_param = netdev;
+ ctl->adesc->callback = ks8842_dma_tx_cb;
+ ctl->adesc->tx_submit(ctl->adesc);
+
+ netdev->stats.tx_bytes += skb->len;
+
+ dev_kfree_skb(skb);
+
+ return NETDEV_TX_OK;
+}
+
static int ks8842_tx_frame(struct sk_buff *skb, struct net_device *netdev)
{
struct ks8842_adapter *adapter = netdev_priv(netdev);
@@ -422,6 +525,121 @@ static int ks8842_tx_frame(struct sk_buff *skb, struct net_device *netdev)
return NETDEV_TX_OK;
}
+static void ks8842_update_rx_err_counters(struct net_device *netdev, u32 status)
+{
+ netdev_dbg(netdev, "RX error, status: %x\n", status);
+
+ netdev->stats.rx_errors++;
+ if (status & RXSR_TOO_LONG)
+ netdev->stats.rx_length_errors++;
+ if (status & RXSR_CRC_ERROR)
+ netdev->stats.rx_crc_errors++;
+ if (status & RXSR_RUNT)
+ netdev->stats.rx_frame_errors++;
+}
+
+static void ks8842_update_rx_counters(struct net_device *netdev, u32 status,
+ int len)
+{
+ netdev_dbg(netdev, "RX packet, len: %d\n", len);
+
+ netdev->stats.rx_packets++;
+ netdev->stats.rx_bytes += len;
+ if (status & RXSR_MULTICAST)
+ netdev->stats.multicast++;
+}
+
+static int __ks8842_start_new_rx_dma(struct net_device *netdev)
+{
+ struct ks8842_adapter *adapter = netdev_priv(netdev);
+ struct ks8842_rx_dma_ctl *ctl = &adapter->dma_rx;
+ struct scatterlist *sg = &ctl->sg;
+ int err;
+
+ ctl->skb = netdev_alloc_skb(netdev, DMA_BUFFER_SIZE);
+ if (ctl->skb) {
+ sg_init_table(sg, 1);
+ sg_dma_address(sg) = dma_map_single(adapter->dev,
+ ctl->skb->data, DMA_BUFFER_SIZE, DMA_FROM_DEVICE);
+ err = dma_mapping_error(adapter->dev, sg_dma_address(sg));
+ if (unlikely(err)) {
+ sg_dma_address(sg) = 0;
+ goto out;
+ }
+
+ sg_dma_len(sg) = DMA_BUFFER_SIZE;
+
+ ctl->adesc = ctl->chan->device->device_prep_slave_sg(ctl->chan,
+ sg, 1, DMA_FROM_DEVICE,
+ DMA_PREP_INTERRUPT | DMA_COMPL_SKIP_SRC_UNMAP);
+
+ if (!ctl->adesc)
+ goto out;
+
+ ctl->adesc->callback_param = netdev;
+ ctl->adesc->callback = ks8842_dma_rx_cb;
+ ctl->adesc->tx_submit(ctl->adesc);
+ } else {
+ err = -ENOMEM;
+ sg_dma_address(sg) = 0;
+ goto out;
+ }
+
+ return err;
+out:
+ if (sg_dma_address(sg))
+ dma_unmap_single(adapter->dev, sg_dma_address(sg),
+ DMA_BUFFER_SIZE, DMA_FROM_DEVICE);
+ sg_dma_address(sg) = 0;
+ if (ctl->skb)
+ dev_kfree_skb(ctl->skb);
+
+ ctl->skb = NULL;
+
+ printk(KERN_ERR DRV_NAME": Failed to start RX DMA: %d\n", err);
+ return err;
+}
+
+static void ks8842_rx_frame_dma_tasklet(unsigned long arg)
+{
+ struct net_device *netdev = (struct net_device *)arg;
+ struct ks8842_adapter *adapter = netdev_priv(netdev);
+ struct ks8842_rx_dma_ctl *ctl = &adapter->dma_rx;
+ struct sk_buff *skb = ctl->skb;
+ dma_addr_t addr = sg_dma_address(&ctl->sg);
+ u32 status;
+
+ ctl->adesc = NULL;
+
+ /* kick next transfer going */
+ __ks8842_start_new_rx_dma(netdev);
+
+ /* now handle the data we got */
+ dma_unmap_single(adapter->dev, addr, DMA_BUFFER_SIZE, DMA_FROM_DEVICE);
+
+ status = *((u32 *)skb->data);
+
+ netdev_dbg(netdev, "%s - rx_data: status: %x\n",
+ __func__, status & 0xffff);
+
+ /* check the status */
+ if ((status & RXSR_VALID) && !(status & RXSR_ERROR)) {
+ int len = (status >> 16) & 0x7ff;
+
+ ks8842_update_rx_counters(netdev, status, len);
+
+ /* reserve 4 bytes which is the status word */
+ skb_reserve(skb, 4);
+ skb_put(skb, len);
+
+ skb->protocol = eth_type_trans(skb, netdev);
+ netif_rx(skb);
+ } else {
+ ks8842_update_rx_err_counters(netdev, status);
+ dev_kfree_skb(skb);
+ }
+}
+
static void ks8842_rx_frame(struct net_device *netdev,
struct ks8842_adapter *adapter)
{
@@ -445,13 +663,9 @@ static void ks8842_rx_frame(struct net_device *netdev,
if ((status & RXSR_VALID) && !(status & RXSR_ERROR)) {
struct sk_buff *skb = netdev_alloc_skb_ip_align(netdev, len);
- netdev_dbg(netdev, "%s, got package, len: %d\n", __func__, len);
if (skb) {
- netdev->stats.rx_packets++;
- netdev->stats.rx_bytes += len;
- if (status & RXSR_MULTICAST)
- netdev->stats.multicast++;
+ ks8842_update_rx_counters(netdev, status, len);
if (adapter->conf_flags & KS884X_16BIT) {
u16 *data16 = (u16 *)skb_put(skb, len);
@@ -477,16 +691,8 @@ static void ks8842_rx_frame(struct net_device *netdev,
netif_rx(skb);
} else
netdev->stats.rx_dropped++;
- } else {
- netdev_dbg(netdev, "RX error, status: %x\n", status);
- netdev->stats.rx_errors++;
- if (status & RXSR_TOO_LONG)
- netdev->stats.rx_length_errors++;
- if (status & RXSR_CRC_ERROR)
- netdev->stats.rx_crc_errors++;
- if (status & RXSR_RUNT)
- netdev->stats.rx_frame_errors++;
- }
+ } else
+ ks8842_update_rx_err_counters(netdev, status);
/* set high watermark to 3K */
ks8842_clear_bits(adapter, 0, 1 << 12, REG_QRFCR);
@@ -541,6 +747,12 @@ void ks8842_tasklet(unsigned long arg)
isr = ks8842_read16(adapter, 18, REG_ISR);
netdev_dbg(netdev, "%s - ISR: 0x%x\n", __func__, isr);
+ /* when running in DMA mode, do not ack RX interrupts, it is handled
+ internally by timberdale, otherwise it's DMA FIFO:s would stop
+ */
+ if (KS8842_USE_DMA(adapter))
+ isr &= ~IRQ_RX;
+
/* Ack */
ks8842_write16(adapter, 18, isr, REG_ISR);
@@ -554,9 +766,11 @@ void ks8842_tasklet(unsigned long arg)
if (isr & IRQ_LINK_CHANGE)
ks8842_update_link_status(netdev, adapter);
- if (isr & (IRQ_RX | IRQ_RX_ERROR))
+ /* should not get IRQ_RX when running DMA mode */
+ if (isr & (IRQ_RX | IRQ_RX_ERROR) && !KS8842_USE_DMA(adapter))
ks8842_handle_rx(netdev, adapter);
+ /* should only happen when in PIO mode */
if (isr & IRQ_TX)
ks8842_handle_tx(netdev, adapter);
@@ -575,8 +789,17 @@ void ks8842_tasklet(unsigned long arg)
/* re-enable interrupts, put back the bank selection register */
spin_lock_irqsave(&adapter->lock, flags);
- ks8842_write16(adapter, 18, ENABLED_IRQS, REG_IER);
+ if (KS8842_USE_DMA(adapter))
+ ks8842_write16(adapter, 18, ENABLED_IRQS_DMA, REG_IER);
+ else
+ ks8842_write16(adapter, 18, ENABLED_IRQS, REG_IER);
iowrite16(entry_bank, adapter->hw_addr + REG_SELECT_BANK);
+
+ /* Make sure timberdale continues DMA operations, they are stopped while
+ we are handling the ks8842 because we might change bank */
+ if (KS8842_USE_DMA(adapter))
+ ks8842_resume_dma(adapter);
+
spin_unlock_irqrestore(&adapter->lock, flags);
}
@@ -592,8 +815,12 @@ static irqreturn_t ks8842_irq(int irq, void *devid)
netdev_dbg(netdev, "%s - ISR: 0x%x\n", __func__, isr);
if (isr) {
- /* disable IRQ */
- ks8842_write16(adapter, 18, 0x00, REG_IER);
+ if (KS8842_USE_DMA(adapter))
+ /* disable all but RX IRQ, since the FPGA relies on it*/
+ ks8842_write16(adapter, 18, IRQ_RX, REG_IER);
+ else
+ /* disable IRQ */
+ ks8842_write16(adapter, 18, 0x00, REG_IER);
/* schedule tasklet */
tasklet_schedule(&adapter->tasklet);
@@ -603,9 +830,151 @@ static irqreturn_t ks8842_irq(int irq, void *devid)
iowrite16(entry_bank, adapter->hw_addr + REG_SELECT_BANK);
+ /* After an interrupt, tell timberdale to continue DMA operations.
+ DMA is disabled while we are handling the ks8842 because we might
+ change bank */
+ ks8842_resume_dma(adapter);
+
return ret;
}
+static void ks8842_dma_rx_cb(void *data)
+{
+ struct net_device *netdev = data;
+ struct ks8842_adapter *adapter = netdev_priv(netdev);
+
+ netdev_dbg(netdev, "RX DMA finished\n");
+ /* schedule tasklet */
+ if (adapter->dma_rx.adesc)
+ tasklet_schedule(&adapter->dma_rx.tasklet);
+}
+
+static void ks8842_dma_tx_cb(void *data)
+{
+ struct net_device *netdev = data;
+ struct ks8842_adapter *adapter = netdev_priv(netdev);
+ struct ks8842_tx_dma_ctl *ctl = &adapter->dma_tx;
+
+ netdev_dbg(netdev, "TX DMA finished\n");
+
+ if (!ctl->adesc)
+ return;
+
+ netdev->stats.tx_packets++;
+ ctl->adesc = NULL;
+
+ if (netif_queue_stopped(netdev))
+ netif_wake_queue(netdev);
+}
+
+static void ks8842_stop_dma(struct ks8842_adapter *adapter)
+{
+ struct ks8842_tx_dma_ctl *tx_ctl = &adapter->dma_tx;
+ struct ks8842_rx_dma_ctl *rx_ctl = &adapter->dma_rx;
+
+ tx_ctl->adesc = NULL;
+ if (tx_ctl->chan)
+ tx_ctl->chan->device->device_control(tx_ctl->chan,
+ DMA_TERMINATE_ALL, 0);
+
+ rx_ctl->adesc = NULL;
+ if (rx_ctl->chan)
+ rx_ctl->chan->device->device_control(rx_ctl->chan,
+ DMA_TERMINATE_ALL, 0);
+
+ if (sg_dma_address(&rx_ctl->sg))
+ dma_unmap_single(adapter->dev, sg_dma_address(&rx_ctl->sg),
+ DMA_BUFFER_SIZE, DMA_FROM_DEVICE);
+ sg_dma_address(&rx_ctl->sg) = 0;
+
+ dev_kfree_skb(rx_ctl->skb);
+ rx_ctl->skb = NULL;
+}
+
+static void ks8842_dealloc_dma_bufs(struct ks8842_adapter *adapter)
+{
+ struct ks8842_tx_dma_ctl *tx_ctl = &adapter->dma_tx;
+ struct ks8842_rx_dma_ctl *rx_ctl = &adapter->dma_rx;
+
+ ks8842_stop_dma(adapter);
+
+ if (tx_ctl->chan)
+ dma_release_channel(tx_ctl->chan);
+ tx_ctl->chan = NULL;
+
+ if (rx_ctl->chan)
+ dma_release_channel(rx_ctl->chan);
+ rx_ctl->chan = NULL;
+
+ tasklet_kill(&rx_ctl->tasklet);
+
+ if (sg_dma_address(&tx_ctl->sg))
+ dma_unmap_single(adapter->dev, sg_dma_address(&tx_ctl->sg),
+ DMA_BUFFER_SIZE, DMA_TO_DEVICE);
+ sg_dma_address(&tx_ctl->sg) = 0;
+
+ kfree(tx_ctl->buf);
+ tx_ctl->buf = NULL;
+}
+
+static bool ks8842_dma_filter_fn(struct dma_chan *chan, void *filter_param)
+{
+ return chan->chan_id == (int)filter_param;
+}
+
+static int ks8842_alloc_dma_bufs(struct net_device *netdev)
+{
+ struct ks8842_adapter *adapter = netdev_priv(netdev);
+ struct ks8842_tx_dma_ctl *tx_ctl = &adapter->dma_tx;
+ struct ks8842_rx_dma_ctl *rx_ctl = &adapter->dma_rx;
+ int err;
+
+ dma_cap_mask_t mask;
+
+ dma_cap_zero(mask);
+ dma_cap_set(DMA_SLAVE, mask);
+ dma_cap_set(DMA_PRIVATE, mask);
+
+ sg_init_table(&tx_ctl->sg, 1);
+
+ tx_ctl->chan = dma_request_channel(mask, ks8842_dma_filter_fn,
+ (void *)tx_ctl->channel);
+ if (!tx_ctl->chan) {
+ err = -ENODEV;
+ goto err;
+ }
+
+ /* allocate DMA buffer */
+ tx_ctl->buf = kmalloc(DMA_BUFFER_SIZE, GFP_KERNEL);
+ if (!tx_ctl->buf) {
+ err = -ENOMEM;
+ goto err;
+ }
+
+ sg_dma_address(&tx_ctl->sg) = dma_map_single(adapter->dev,
+ tx_ctl->buf, DMA_BUFFER_SIZE, DMA_TO_DEVICE);
+ err = dma_mapping_error(adapter->dev,
+ sg_dma_address(&tx_ctl->sg));
+ if (err) {
+ sg_dma_address(&tx_ctl->sg) = 0;
+ goto err;
+ }
+
+ rx_ctl->chan = dma_request_channel(mask, ks8842_dma_filter_fn,
+ (void *)rx_ctl->channel);
+ if (!rx_ctl->chan) {
+ err = -ENODEV;
+ goto err;
+ }
+
+ tasklet_init(&rx_ctl->tasklet, ks8842_rx_frame_dma_tasklet,
+ (unsigned long)netdev);
+
+ return 0;
+err:
+ ks8842_dealloc_dma_bufs(adapter);
+ return err;
+}
/* Netdevice operations */
@@ -616,6 +985,25 @@ static int ks8842_open(struct net_device *netdev)
netdev_dbg(netdev, "%s - entry\n", __func__);
+ if (KS8842_USE_DMA(adapter)) {
+ err = ks8842_alloc_dma_bufs(netdev);
+
+ if (!err) {
+ /* start RX dma */
+ err = __ks8842_start_new_rx_dma(netdev);
+ if (err)
+ ks8842_dealloc_dma_bufs(adapter);
+ }
+
+ if (err) {
+ printk(KERN_WARNING DRV_NAME
+ ": Failed to initiate DMA, running PIO\n");
+ ks8842_dealloc_dma_bufs(adapter);
+ adapter->dma_rx.channel = -1;
+ adapter->dma_tx.channel = -1;
+ }
+ }
+
/* reset the HW */
ks8842_reset_hw(adapter);
@@ -641,6 +1029,9 @@ static int ks8842_close(struct net_device *netdev)
cancel_work_sync(&adapter->timeout_work);
+ if (KS8842_USE_DMA(adapter))
+ ks8842_dealloc_dma_bufs(adapter);
+
/* free the irq */
free_irq(adapter->irq, netdev);
@@ -658,6 +1049,17 @@ static netdev_tx_t ks8842_xmit_frame(struct sk_buff *skb,
netdev_dbg(netdev, "%s: entry\n", __func__);
+ if (KS8842_USE_DMA(adapter)) {
+ unsigned long flags;
+ ret = ks8842_tx_frame_dma(skb, netdev);
+ /* for now only allow one transfer at the time */
+ spin_lock_irqsave(&adapter->lock, flags);
+ if (adapter->dma_tx.adesc)
+ netif_stop_queue(netdev);
+ spin_unlock_irqrestore(&adapter->lock, flags);
+ return ret;
+ }
+
ret = ks8842_tx_frame(skb, netdev);
if (ks8842_tx_fifo_space(adapter) < netdev->mtu + 8)
@@ -693,6 +1095,10 @@ static void ks8842_tx_timeout_work(struct work_struct *work)
netdev_dbg(netdev, "%s: entry\n", __func__);
spin_lock_irqsave(&adapter->lock, flags);
+
+ if (KS8842_USE_DMA(adapter))
+ ks8842_stop_dma(adapter);
+
/* disable interrupts */
ks8842_write16(adapter, 18, 0, REG_IER);
ks8842_write16(adapter, 18, 0xFFFF, REG_ISR);
@@ -706,6 +1112,9 @@ static void ks8842_tx_timeout_work(struct work_struct *work)
ks8842_write_mac_addr(adapter, netdev->dev_addr);
ks8842_update_link_status(netdev, adapter);
+
+ if (KS8842_USE_DMA(adapter))
+ __ks8842_start_new_rx_dma(netdev);
}
static void ks8842_tx_timeout(struct net_device *netdev)
@@ -765,6 +1174,19 @@ static int __devinit ks8842_probe(struct platform_device *pdev)
goto err_get_irq;
}
+ adapter->dev = (pdev->dev.parent) ? pdev->dev.parent : &pdev->dev;
+
+ /* DMA is only supported when accessed via timberdale */
+ if (!(adapter->conf_flags & MICREL_KS884X) && pdata &&
+ (pdata->tx_dma_channel != -1) &&
+ (pdata->rx_dma_channel != -1)) {
+ adapter->dma_rx.channel = pdata->rx_dma_channel;
+ adapter->dma_tx.channel = pdata->tx_dma_channel;
+ } else {
+ adapter->dma_rx.channel = -1;
+ adapter->dma_tx.channel = -1;
+ }
+
tasklet_init(&adapter->tasklet, ks8842_tasklet, (unsigned long)netdev);
spin_lock_init(&adapter->lock);
diff --git a/include/linux/ks8842.h b/include/linux/ks8842.h
index da0341b8ca0..14ba4452296 100644
--- a/include/linux/ks8842.h
+++ b/include/linux/ks8842.h
@@ -25,10 +25,14 @@
* struct ks8842_platform_data - Platform data of the KS8842 network driver
* @macaddr: The MAC address of the device, set to all 0:s to use the on in
* the chip.
+ * @rx_dma_channel: The DMA channel to use for RX, -1 for none.
+ * @tx_dma_channel: The DMA channel to use for TX, -1 for none.
*
*/
struct ks8842_platform_data {
u8 macaddr[ETH_ALEN];
+ int rx_dma_channel;
+ int tx_dma_channel;
};
#endif