diff options
| -rw-r--r-- | drivers/input/misc/Kconfig | 12 | ||||
| -rw-r--r-- | drivers/input/misc/Makefile | 1 | ||||
| -rw-r--r-- | drivers/input/misc/ixp4xx-beeper.c | 183 |
3 files changed, 196 insertions, 0 deletions
diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig index e08dbe08f46..4bad588d0e5 100644 --- a/drivers/input/misc/Kconfig +++ b/drivers/input/misc/Kconfig @@ -50,6 +50,18 @@ config INPUT_WISTRON_BTNS To compile this driver as a module, choose M here: the module will be called wistron_btns. +config INPUT_IXP4XX_BEEPER + tristate "IXP4XX Beeper support" + depends on ARCH_IXP4XX + help + If you say yes here, you can connect a beeper to the + ixp4xx gpio pins. This is used by the LinkSys NSLU2. + + If unsure, say Y. + + To compile this driver as a module, choose M here: the + module will be called ixp4xx-beeper. + config INPUT_UINPUT tristate "User level driver support" help diff --git a/drivers/input/misc/Makefile b/drivers/input/misc/Makefile index ce44cce0128..184c4129470 100644 --- a/drivers/input/misc/Makefile +++ b/drivers/input/misc/Makefile @@ -11,3 +11,4 @@ obj-$(CONFIG_INPUT_98SPKR) += 98spkr.o obj-$(CONFIG_INPUT_UINPUT) += uinput.o obj-$(CONFIG_INPUT_WISTRON_BTNS) += wistron_btns.o obj-$(CONFIG_HP_SDC_RTC) += hp_sdc_rtc.o +obj-$(CONFIG_INPUT_IXP4XX_BEEPER) += ixp4xx-beeper.o diff --git a/drivers/input/misc/ixp4xx-beeper.c b/drivers/input/misc/ixp4xx-beeper.c new file mode 100644 index 00000000000..d448bb5e486 --- /dev/null +++ b/drivers/input/misc/ixp4xx-beeper.c @@ -0,0 +1,183 @@ +/* + * Generic IXP4xx beeper driver + * + * Copyright (C) 2005 Tower Technologies + * + * based on nslu2-io.c + * Copyright (C) 2004 Karen Spearel + * + * Author: Alessandro Zummo <a.zummo@towertech.it> + * Maintainers: http://www.nslu2-linux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#include <linux/module.h> +#include <linux/input.h> +#include <linux/delay.h> +#include <linux/platform_device.h> +#include <asm/hardware.h> + +MODULE_AUTHOR("Alessandro Zummo <a.zummo@towertech.it>"); +MODULE_DESCRIPTION("ixp4xx beeper driver"); +MODULE_LICENSE("GPL"); + +static DEFINE_SPINLOCK(beep_lock); + +static void ixp4xx_spkr_control(unsigned int pin, unsigned int count) +{ + unsigned long flags; + + spin_lock_irqsave(&beep_lock, flags); + + if (count) { + gpio_line_config(pin, IXP4XX_GPIO_OUT); + gpio_line_set(pin, IXP4XX_GPIO_LOW); + + *IXP4XX_OSRT2 = (count & ~IXP4XX_OST_RELOAD_MASK) | IXP4XX_OST_ENABLE; + } else { + gpio_line_config(pin, IXP4XX_GPIO_IN); + gpio_line_set(pin, IXP4XX_GPIO_HIGH); + + *IXP4XX_OSRT2 = 0; + } + + spin_unlock_irqrestore(&beep_lock, flags); +} + +static int ixp4xx_spkr_event(struct input_dev *dev, unsigned int type, unsigned int code, int value) +{ + unsigned int pin = (unsigned int) dev->private; + unsigned int count = 0; + + if (type != EV_SND) + return -1; + + switch (code) { + case SND_BELL: + if (value) + value = 1000; + case SND_TONE: + break; + default: + return -1; + } + + if (value > 20 && value < 32767) +#ifndef FREQ + count = (ixp4xx_get_board_tick_rate() / (value * 4)) - 1; +#else + count = (FREQ / (value * 4)) - 1; +#endif + + ixp4xx_spkr_control(pin, count); + + return 0; +} + +static irqreturn_t ixp4xx_spkr_interrupt(int irq, void *dev_id, struct pt_regs *regs) +{ + /* clear interrupt */ + *IXP4XX_OSST = IXP4XX_OSST_TIMER_2_PEND; + + /* flip the beeper output */ + *IXP4XX_GPIO_GPOUTR ^= (1 << (unsigned int) dev_id); + + return IRQ_HANDLED; +} + +static int __devinit ixp4xx_spkr_probe(struct platform_device *dev) +{ + struct input_dev *input_dev; + int err; + + input_dev = input_allocate_device(); + if (!input_dev) + return -ENOMEM; + + input_dev->private = (void *) dev->id; + input_dev->name = "ixp4xx beeper", + input_dev->phys = "ixp4xx/gpio"; + input_dev->id.bustype = BUS_HOST; + input_dev->id.vendor = 0x001f; + input_dev->id.product = 0x0001; + input_dev->id.version = 0x0100; + input_dev->cdev.dev = &dev->dev; + + input_dev->evbit[0] = BIT(EV_SND); + input_dev->sndbit[0] = BIT(SND_BELL) | BIT(SND_TONE); + input_dev->event = ixp4xx_spkr_event; + + err = request_irq(IRQ_IXP4XX_TIMER2, &ixp4xx_spkr_interrupt, + SA_INTERRUPT | SA_TIMER, "ixp4xx-beeper", (void *) dev->id); + if (err) + goto err_free_device; + + err = input_register_device(input_dev); + if (err) + goto err_free_irq; + + platform_set_drvdata(dev, input_dev); + + return 0; + + err_free_irq: + free_irq(IRQ_IXP4XX_TIMER2, dev); + err_free_device: + input_free_device(input_dev); + + return err; +} + +static int __devexit ixp4xx_spkr_remove(struct platform_device *dev) +{ + struct input_dev *input_dev = platform_get_drvdata(dev); + unsigned int pin = (unsigned int) input_dev->private; + + input_unregister_device(input_dev); + platform_set_drvdata(dev, NULL); + + /* turn the speaker off */ + disable_irq(IRQ_IXP4XX_TIMER2); + ixp4xx_spkr_control(pin, 0); + + free_irq(IRQ_IXP4XX_TIMER2, dev); + + return 0; +} + +static void ixp4xx_spkr_shutdown(struct platform_device *dev) +{ + struct input_dev *input_dev = platform_get_drvdata(dev); + unsigned int pin = (unsigned int) input_dev->private; + + /* turn off the speaker */ + disable_irq(IRQ_IXP4XX_TIMER2); + ixp4xx_spkr_control(pin, 0); +} + +static struct platform_driver ixp4xx_spkr_platform_driver = { + .driver = { + .name = "ixp4xx-beeper", + .owner = THIS_MODULE, + }, + .probe = ixp4xx_spkr_probe, + .remove = __devexit_p(ixp4xx_spkr_remove), + .shutdown = ixp4xx_spkr_shutdown, +}; + +static int __init ixp4xx_spkr_init(void) +{ + return platform_driver_register(&ixp4xx_spkr_platform_driver); +} + +static void __exit ixp4xx_spkr_exit(void) +{ + platform_driver_unregister(&ixp4xx_spkr_platform_driver); +} + +module_init(ixp4xx_spkr_init); +module_exit(ixp4xx_spkr_exit); |