diff options
| -rw-r--r-- | Documentation/kernel-parameters.txt | 15 | ||||
| -rw-r--r-- | Documentation/watchdog/00-INDEX | 5 | ||||
| -rw-r--r-- | Documentation/watchdog/watchdog-parameters.txt | 390 | ||||
| -rw-r--r-- | Documentation/watchdog/wdt.txt | 15 | ||||
| -rw-r--r-- | drivers/watchdog/Kconfig | 26 | ||||
| -rw-r--r-- | drivers/watchdog/Makefile | 1 | ||||
| -rw-r--r-- | drivers/watchdog/bfin_wdt.c | 19 | ||||
| -rw-r--r-- | drivers/watchdog/booke_wdt.c | 6 | ||||
| -rw-r--r-- | drivers/watchdog/eurotechwdt.c | 1 | ||||
| -rw-r--r-- | drivers/watchdog/iTCO_vendor_support.c | 11 | ||||
| -rw-r--r-- | drivers/watchdog/iTCO_wdt.c | 29 | ||||
| -rw-r--r-- | drivers/watchdog/imx2_wdt.c | 358 | ||||
| -rw-r--r-- | drivers/watchdog/mpc8xxx_wdt.c | 2 | ||||
| -rw-r--r-- | drivers/watchdog/pc87413_wdt.c | 9 | ||||
| -rw-r--r-- | drivers/watchdog/pnx833x_wdt.c | 11 | ||||
| -rw-r--r-- | drivers/watchdog/s3c2410_wdt.c | 9 | ||||
| -rw-r--r-- | drivers/watchdog/shwdt.c | 2 | ||||
| -rw-r--r-- | drivers/watchdog/twl4030_wdt.c | 2 | ||||
| -rw-r--r-- | drivers/watchdog/wdt.c | 2 | ||||
| -rw-r--r-- | drivers/watchdog/wdt977.c | 2 |
20 files changed, 839 insertions, 76 deletions
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index f5fce483930..b56ea860da2 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -290,9 +290,6 @@ and is between 256 and 4096 characters. It is defined in the file advansys= [HW,SCSI] See header of drivers/scsi/advansys.c. - advwdt= [HW,WDT] Advantech WDT - Format: <iostart>,<iostop> - aedsp16= [HW,OSS] Audio Excel DSP 16 Format: <io>,<irq>,<dma>,<mss_io>,<mpu_io>,<mpu_irq> See also header of sound/oss/aedsp16.c. @@ -765,9 +762,6 @@ and is between 256 and 4096 characters. It is defined in the file This option is obsoleted by the "netdev=" option, which has equivalent usage. See its documentation for details. - eurwdt= [HW,WDT] Eurotech CPU-1220/1410 onboard watchdog. - Format: <io>[,<irq>] - failslab= fail_page_alloc= fail_make_request=[KNL] @@ -2267,9 +2261,6 @@ and is between 256 and 4096 characters. It is defined in the file sched_debug [KNL] Enables verbose scheduler debug messages. - sc1200wdt= [HW,WDT] SC1200 WDT (watchdog) driver - Format: <io>[,<timeout>[,<isapnp>]] - scsi_debug_*= [SCSI] See drivers/scsi/scsi_debug.c. @@ -2858,8 +2849,10 @@ and is between 256 and 4096 characters. It is defined in the file wd7000= [HW,SCSI] See header of drivers/scsi/wd7000.c. - wdt= [WDT] Watchdog - See Documentation/watchdog/wdt.txt. + watchdog timers [HW,WDT] For information on watchdog timers, + see Documentation/watchdog/watchdog-parameters.txt + or other driver-specific files in the + Documentation/watchdog/ directory. x2apic_phys [X86-64,APIC] Use x2apic physical mode instead of default x2apic cluster mode on platforms diff --git a/Documentation/watchdog/00-INDEX b/Documentation/watchdog/00-INDEX index c3ea47e507f..ee994513a9b 100644 --- a/Documentation/watchdog/00-INDEX +++ b/Documentation/watchdog/00-INDEX @@ -1,10 +1,15 @@ 00-INDEX - this file. +hpwdt.txt + - information on the HP iLO2 NMI watchdog pcwd-watchdog.txt - documentation for Berkshire Products PC Watchdog ISA cards. src/ - directory holding watchdog related example programs. watchdog-api.txt - description of the Linux Watchdog driver API. +watchdog-parameters.txt + - information on driver parameters (for drivers other than + the ones that have driver-specific files here) wdt.txt - description of the Watchdog Timer Interfaces for Linux. diff --git a/Documentation/watchdog/watchdog-parameters.txt b/Documentation/watchdog/watchdog-parameters.txt new file mode 100644 index 00000000000..41c95cc1dc1 --- /dev/null +++ b/Documentation/watchdog/watchdog-parameters.txt @@ -0,0 +1,390 @@ +This file provides information on the module parameters of many of +the Linux watchdog drivers. Watchdog driver parameter specs should +be listed here unless the driver has its own driver-specific information +file. + + +See Documentation/kernel-parameters.txt for information on +providing kernel parameters for builtin drivers versus loadable +modules. + + +------------------------------------------------- +acquirewdt: +wdt_stop: Acquire WDT 'stop' io port (default 0x43) +wdt_start: Acquire WDT 'start' io port (default 0x443) +nowayout: Watchdog cannot be stopped once started + (default=kernel config parameter) +------------------------------------------------- +advantechwdt: +wdt_stop: Advantech WDT 'stop' io port (default 0x443) +wdt_start: Advantech WDT 'start' io port (default 0x443) +timeout: Watchdog timeout in seconds. 1<= timeout <=63, default=60. +nowayout: Watchdog cannot be stopped once started + (default=kernel config parameter) +------------------------------------------------- +alim1535_wdt: +timeout: Watchdog timeout in seconds. (0 < timeout < 18000, default=60 +nowayout: Watchdog cannot be stopped once started + (default=kernel config parameter) +------------------------------------------------- +alim7101_wdt: +timeout: Watchdog timeout in seconds. (1<=timeout<=3600, default=30 +use_gpio: Use the gpio watchdog (required by old cobalt boards). + default=0/off/no +nowayout: Watchdog cannot be stopped once started + (default=kernel config parameter) +------------------------------------------------- +ar7_wdt: +margin: Watchdog margin in seconds (default=60) +nowayout: Disable watchdog shutdown on close + (default=kernel config parameter) +------------------------------------------------- +at32ap700x_wdt: +timeout: Timeout value. Limited to be 1 or 2 seconds. (default=2) +nowayout: Watchdog cannot be stopped once started + (default=kernel config parameter) +------------------------------------------------- +at91rm9200_wdt: +wdt_time: Watchdog time in seconds. (default=5) +nowayout: Watchdog cannot be stopped once started + (default=kernel config parameter) +------------------------------------------------- +at91sam9_wdt: +heartbeat: Watchdog heartbeats in seconds. (default = 15) +nowayout: Watchdog cannot be stopped once started + (default=kernel config parameter) +------------------------------------------------- +bcm47xx_wdt: +wdt_time: Watchdog time in seconds. (default=30) +nowayout: Watchdog cannot be stopped once started + (default=kernel config parameter) +------------------------------------------------- +bfin_wdt: +timeout: Watchdog timeout in seconds. (1<=timeout<=((2^32)/SCLK), default=20) +nowayout: Watchdog cannot be stopped once started + (default=kernel config parameter) +------------------------------------------------- +coh901327_wdt: +margin: Watchdog margin in seconds (default 60s) +------------------------------------------------- +cpu5wdt: +port: base address of watchdog card, default is 0x91 +verbose: be verbose, default is 0 (no) +ticks: count down ticks, default is 10000 +------------------------------------------------- +cpwd: +wd0_timeout: Default watchdog0 timeout in 1/10secs +wd1_timeout: Default watchdog1 timeout in 1/10secs +wd2_timeout: Default watchdog2 timeout in 1/10secs +------------------------------------------------- +davinci_wdt: +heartbeat: Watchdog heartbeat period in seconds from 1 to 600, default 60 +------------------------------------------------- +ep93xx_wdt: +nowayout: Watchdog cannot be stopped once started +timeout: Watchdog timeout in seconds. (1<=timeout<=3600, default=TBD) +------------------------------------------------- +eurotechwdt: +nowayout: Watchdog cannot be stopped once started + (default=kernel config parameter) +io: Eurotech WDT io port (default=0x3f0) +irq: Eurotech WDT irq (default=10) +ev: Eurotech WDT event type (default is `int') +------------------------------------------------- +gef_wdt: +nowayout: Watchdog cannot be stopped once started + (default=kernel config parameter) +------------------------------------------------- +geodewdt: +timeout: Watchdog timeout in seconds. 1<= timeout <=131, default=60. +nowayout: Watchdog cannot be stopped once started + (default=kernel config parameter) +------------------------------------------------- +i6300esb: +heartbeat: Watchdog heartbeat in seconds. (1<heartbeat<2046, default=30) +nowayout: Watchdog cannot be stopped once started + (default=kernel config parameter) +------------------------------------------------- +iTCO_wdt: +heartbeat: Watchdog heartbeat in seconds. + (2<heartbeat<39 (TCO v1) or 613 (TCO v2), default=30) +nowayout: Watchdog cannot be stopped once started + (default=kernel config parameter) +------------------------------------------------- +iTCO_vendor_support: +vendorsupport: iTCO vendor specific support mode, default=0 (none), + 1=SuperMicro Pent3, 2=SuperMicro Pent4+, 911=Broken SMI BIOS +------------------------------------------------- +ib700wdt: +timeout: Watchdog timeout in seconds. 0<= timeout <=30, default=30. +nowayout: Watchdog cannot be stopped once started + (default=kernel config parameter) +------------------------------------------------- +ibmasr: +nowayout: Watchdog cannot be stopped once started + (default=kernel config parameter) +------------------------------------------------- +indydog: +nowayout: Watchdog cannot be stopped once started + (default=kernel config parameter) +------------------------------------------------- +iop_wdt: +nowayout: Watchdog cannot be stopped once started + (default=kernel config parameter) +------------------------------------------------- +it8712f_wdt: +margin: Watchdog margin in seconds (default 60) +nowayout: Disable watchdog shutdown on close + (default=kernel config parameter) +------------------------------------------------- +it87_wdt: +nogameport: Forbid the activation of game port, default=0 +exclusive: Watchdog exclusive device open, default=1 +timeout: Watchdog timeout in seconds, default=60 +testmode: Watchdog test mode (1 = no reboot), default=0 +nowayout: Watchdog cannot be stopped once started + (default=kernel config parameter) +------------------------------------------------- +ixp2000_wdt: +heartbeat: Watchdog heartbeat in seconds (default 60s) +nowayout: Watchdog cannot be stopped once started + (default=kernel config parameter) +------------------------------------------------- +ixp4xx_wdt: +heartbeat: Watchdog heartbeat in seconds (default 60s) +nowayout: Watchdog cannot be stopped once started + (default=kernel config parameter) +------------------------------------------------- +ks8695_wdt: +wdt_time: Watchdog time in seconds. (default=5) +nowayout: Watchdog cannot be stopped once started + (default=kernel config parameter) +------------------------------------------------- +machzwd: +nowayout: Watchdog cannot be stopped once started + (default=kernel config parameter) +action: after watchdog resets, generate: + 0 = RESET(*) 1 = SMI 2 = NMI 3 = SCI +------------------------------------------------- +max63xx_wdt: +heartbeat: Watchdog heartbeat period in seconds from 1 to 60, default 60 +nowayout: Watchdog cannot be stopped once started + (default=kernel config parameter) +nodelay: Force selection of a timeout setting without initial delay + (max6373/74 only, default=0) +------------------------------------------------- +mixcomwd: +nowayout: Watchdog cannot be stopped once started + (default=kernel config parameter) +------------------------------------------------- +mpc8xxx_wdt: +timeout: Watchdog timeout in ticks. (0<timeout<65536, default=65535) +reset: Watchdog Interrupt/Reset Mode. 0 = interrupt, 1 = reset +nowayout: Watchdog cannot be stopped once started + (default=kernel config parameter) +------------------------------------------------- +mpcore_wdt: +mpcore_margin: MPcore timer margin in seconds. + (0 < mpcore_margin < 65536, default=60) +nowayout: Watchdog cannot be stopped once started + (default=kernel config parameter) +mpcore_noboot: MPcore watchdog action, set to 1 to ignore reboots, + 0 to reboot (default=0 +------------------------------------------------- +mv64x60_wdt: +nowayout: Watchdog cannot be stopped once started + (default=kernel config parameter) +------------------------------------------------- +nuc900_wdt: +heartbeat: Watchdog heartbeats in seconds. + (default = 15) +nowayout: Watchdog cannot be stopped once started + (default=kernel config parameter) +------------------------------------------------- +omap_wdt: +timer_margin: initial watchdog timeout (in seconds) +------------------------------------------------- +orion_wdt: +heartbeat: Initial watchdog heartbeat in seconds +nowayout: Watchdog cannot be stopped once started + (default=kernel config parameter) +------------------------------------------------- +pc87413_wdt: +io: pc87413 WDT I/O port (default: io). +timeout: Watchdog timeout in minutes (default=timeout). +nowayout: Watchdog cannot be stopped once started + (default=kernel config parameter) +------------------------------------------------- +pika_wdt: +heartbeat: Watchdog heartbeats in seconds. (default = 15) +nowayout: Watchdog cannot be stopped once started + (default=kernel config parameter) +------------------------------------------------- +pnx4008_wdt: +heartbeat: Watchdog heartbeat period in seconds from 1 to 60, default 19 +nowayout: Set to 1 to keep watchdog running after device release +------------------------------------------------- +pnx833x_wdt: +timeout: Watchdog timeout in Mhz. (68Mhz clock), default=2040000000 (30 seconds) +nowayout: Watchdog cannot be stopped once started + (default=kernel config parameter) +start_enabled: Watchdog is started on module insertion (default=1) +------------------------------------------------- +rc32434_wdt: +timeout: Watchdog timeout value, in seconds (default=20) +nowayout: Watchdog cannot be stopped once started + (default=kernel config parameter) +------------------------------------------------- +riowd: +riowd_timeout: Watchdog timeout in minutes (default=1) +------------------------------------------------- +s3c2410_wdt: +tmr_margin: Watchdog tmr_margin in seconds. (default=15) +tmr_atboot: Watchdog is started at boot time if set to 1, default=0 +nowayout: Watchdog cannot be stopped once started + (default=kernel config parameter) +soft_noboot: Watchdog action, set to 1 to ignore reboots, 0 to reboot +debug: Watchdog debug, set to >1 for debug, (default 0) +------------------------------------------------- +sa1100_wdt: +margin: Watchdog margin in seconds (default 60s) +------------------------------------------------- +sb_wdog: +timeout: Watchdog timeout in microseconds (max/default 8388607 or 8.3ish secs) +------------------------------------------------- +sbc60xxwdt: +wdt_stop: SBC60xx WDT 'stop' io port (default 0x45) +wdt_start: SBC60xx WDT 'start' io port (default 0x443) +timeout: Watchdog timeout in seconds. (1<=timeout<=3600, default=30) +nowayout: Watchdog cannot be stopped once started + (default=kernel config parameter) +------------------------------------------------- +sbc7240_wdt: +timeout: Watchdog timeout in seconds. (1<=timeout<=255, default=30) +nowayout: Disable watchdog when closing device file +------------------------------------------------- +sbc8360: +timeout: Index into timeout table (0-63) (default=27 (60s)) +nowayout: Watchdog cannot be stopped once started + (default=kernel config parameter) +------------------------------------------------- +sbc_epx_c3: +nowayout: Watchdog cannot be stopped once started + (default=kernel config parameter) +------------------------------------------------- +sbc_fitpc2_wdt: +margin: Watchdog margin in seconds (default 60s) +nowayout: Watchdog cannot be stopped once started +------------------------------------------------- +sc1200wdt: +isapnp: When set to 0 driver ISA PnP support will be disabled (default=1) +io: io port +timeout: range is 0-255 minutes, default is 1 +nowayout: Watchdog cannot be stopped once started + (default=kernel config parameter) +------------------------------------------------- +sc520_wdt: +timeout: Watchdog timeout in seconds. (1 <= timeout <= 3600, default=30) +nowayout: Watchdog cannot be stopped once started + (default=kernel config parameter) +------------------------------------------------- +sch311x_wdt: +force_id: Override the detected device ID +therm_trip: Should a ThermTrip trigger the reset generator +timeout: Watchdog timeout in seconds. 1<= timeout <=15300, default=60 +nowayout: Watchdog cannot be stopped once started + (default=kernel config parameter) +------------------------------------------------- +scx200_wdt: +margin: Watchdog margin in seconds +nowayout: Disable watchdog shutdown on close +------------------------------------------------- +shwdt: +clock_division_ratio: Clock division ratio. Valid ranges are from 0x5 (1.31ms) + to 0x7 (5.25ms). (default=7) +heartbeat: Watchdog heartbeat in seconds. (1 <= heartbeat <= 3600, default=30 +nowayout: Watchdog cannot be stopped once started + (default=kernel config parameter) +------------------------------------------------- +smsc37b787_wdt: +timeout: range is 1-255 units, default is 60 +nowayout: Watchdog cannot be stopped once started + (default=kernel config parameter) +------------------------------------------------- +softdog: +soft_margin: Watchdog soft_margin in seconds. + (0 < soft_margin < 65536, default=60) +nowayout: Watchdog cannot be stopped once started + (default=kernel config parameter) +soft_noboot: Softdog action, set to 1 to ignore reboots, 0 to reboot + (default=0) +------------------------------------------------- +stmp3xxx_wdt: +heartbeat: Watchdog heartbeat period in seconds from 1 to 4194304, default 19 +------------------------------------------------- +ts72xx_wdt: +timeout: Watchdog timeout in seconds. (1 <= timeout <= 8, default=8) +nowayout: Disable watchdog shutdown on close +------------------------------------------------- +twl4030_wdt: +nowayout: Watchdog cannot be stopped once started + (default=kernel config parameter) +------------------------------------------------- +txx9wdt: +timeout: Watchdog timeout in seconds. (0<timeout<N, default=60) +nowayout: Watchdog cannot be stopped once started + (default=kernel config parameter) +------------------------------------------------- +w83627hf_wdt: +wdt_io: w83627hf/thf WDT io port (default 0x2E) +timeout: Watchdog timeout in seconds. 1 <= timeout <= 255, default=60. +nowayout: Watchdog cannot be stopped once started + (default=kernel config parameter) +------------------------------------------------- +w83697hf_wdt: +wdt_io: w83697hf/hg WDT io port (default 0x2e, 0 = autodetect) +timeout: Watchdog timeout in seconds. 1<= timeout <=255 (default=60) +nowayout: Watchdog cannot be stopped once started + (default=kernel config parameter) +early_disable: Watchdog gets disabled at boot time (default=1) +------------------------------------------------- +w83697ug_wdt: +wdt_io: w83697ug/uf WDT io port (default 0x2e) +timeout: Watchdog timeout in seconds. 1<= timeout <=255 (default=60) +nowayout: Watchdog cannot be stopped once started + (default=kernel config parameter) +------------------------------------------------- +w83877f_wdt: +timeout: Watchdog timeout in seconds. (1<=timeout<=3600, default=30) +nowayout: Watchdog cannot be stopped once started + (default=kernel config parameter) +------------------------------------------------- +w83977f_wdt: +timeout: Watchdog timeout in seconds (15..7635), default=45) +testmode: Watchdog testmode (1 = no reboot), default=0 +nowayout: Watchdog cannot be stopped once started + (default=kernel config parameter) +------------------------------------------------- +wafer5823wdt: +timeout: Watchdog timeout in seconds. 1 <= timeout <= 255, default=60. +nowayout: Watchdog cannot be stopped once started + (default=kernel config parameter) +------------------------------------------------- +wdt285: +soft_margin: Watchdog timeout in seconds (default=60) +------------------------------------------------- +wdt977: +timeout: Watchdog timeout in seconds (60..15300, default=60) +testmode: Watchdog testmode (1 = no reboot), default=0 +nowayout: Watchdog cannot be stopped once started + (default=kernel config parameter) +------------------------------------------------- +wm831x_wdt: +nowayout: Watchdog cannot be stopped once started + (default=kernel config parameter) +------------------------------------------------- +wm8350_wdt: +nowayout: Watchdog cannot be stopped once started + (default=kernel config parameter) +------------------------------------------------- diff --git a/Documentation/watchdog/wdt.txt b/Documentation/watchdog/wdt.txt index 03fd756d976..061c2e35384 100644 --- a/Documentation/watchdog/wdt.txt +++ b/Documentation/watchdog/wdt.txt @@ -14,14 +14,22 @@ reboot will depend on the state of the machines and interrupts. The hardware boards physically pull the machine down off their own onboard timers and will reboot from almost anything. -A second temperature monitoring interface is available on the WDT501P cards +A second temperature monitoring interface is available on the WDT501P cards. This provides /dev/temperature. This is the machine internal temperature in degrees Fahrenheit. Each read returns a single byte giving the temperature. The third interface logs kernel messages on additional alert events. -The wdt card cannot be safely probed for. Instead you need to pass -wdt=ioaddr,irq as a boot parameter - eg "wdt=0x240,11". +The ICS ISA-bus wdt card cannot be safely probed for. Instead you need to +pass IO address and IRQ boot parameters. E.g.: + wdt.io=0x240 wdt.irq=11 + +Other "wdt" driver parameters are: + heartbeat Watchdog heartbeat in seconds (default 60) + nowayout Watchdog cannot be stopped once started (kernel + build parameter) + tachometer WDT501-P Fan Tachometer support (0=disable, default=0) + type WDT501-P Card type (500 or 501, default=500) Features -------- @@ -40,4 +48,3 @@ Minor numbers are however allocated for it. Example Watchdog Driver: see Documentation/watchdog/src/watchdog-simple.c - diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig index b87ba23442d..afcfacc9bbe 100644 --- a/drivers/watchdog/Kconfig +++ b/drivers/watchdog/Kconfig @@ -145,13 +145,19 @@ config KS8695_WATCHDOG Watchdog timer embedded into KS8695 processor. This will reboot your system when the timeout is reached. +config HAVE_S3C2410_WATCHDOG + bool + help + This will include watchdog timer support for Samsung SoCs. If + you want to include watchdog support for any machine, kindly + select this in the respective mach-XXXX/Kconfig file. + config S3C2410_WATCHDOG tristate "S3C2410 Watchdog" - depends on ARCH_S3C2410 + depends on ARCH_S3C2410 || HAVE_S3C2410_WATCHDOG help - Watchdog timer block in the Samsung S3C2410 chips. This will - reboot the system when the timer expires with the watchdog - enabled. + Watchdog timer block in the Samsung SoCs. This will reboot + the system when the timer expires with the watchdog enabled. The driver is limited by the speed of the system's PCLK signal, so with reasonably fast systems (PCLK around 50-66MHz) @@ -306,6 +312,18 @@ config MAX63XX_WATCHDOG help Support for memory mapped max63{69,70,71,72,73,74} watchdog timer. +config IMX2_WDT + tristate "IMX2+ Watchdog" + depends on ARCH_MX2 || ARCH_MX25 || ARCH_MX3 || ARCH_MX5 + help + This is the driver for the hardware watchdog + on the Freescale IMX2 and later processors. + If you have one of these processors and wish to have + watchdog support enabled, say Y, otherwise say N. + + To compile this driver as a module, choose M here: the + module will be called imx2_wdt. + # AVR32 Architecture config AT32AP700X_WDT diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile index 5e3cb95bb0e..72f3e2073f8 100644 --- a/drivers/watchdog/Makefile +++ b/drivers/watchdog/Makefile @@ -47,6 +47,7 @@ obj-$(CONFIG_STMP3XXX_WATCHDOG) += stmp3xxx_wdt.o obj-$(CONFIG_NUC900_WATCHDOG) += nuc900_wdt.o obj-$(CONFIG_ADX_WATCHDOG) += adx_wdt.o obj-$(CONFIG_TS72XX_WATCHDOG) += ts72xx_wdt.o +obj-$(CONFIG_IMX2_WDT) += imx2_wdt.o # AVR32 Architecture obj-$(CONFIG_AT32AP700X_WDT) += at32ap700x_wdt.o diff --git a/drivers/watchdog/bfin_wdt.c b/drivers/watchdog/bfin_wdt.c index 9c7ccd1e908..9042a95fc98 100644 --- a/drivers/watchdog/bfin_wdt.c +++ b/drivers/watchdog/bfin_wdt.c @@ -23,6 +23,7 @@ #include <linux/interrupt.h> #include <linux/uaccess.h> #include <asm/blackfin.h> +#include <asm/bfin_watchdog.h> #define stamp(fmt, args...) \ pr_debug("%s:%i: " fmt "\n", __func__, __LINE__, ## args) @@ -49,24 +50,6 @@ # define bfin_write_WDOG_STAT(x) bfin_write_WDOGA_STAT(x) #endif -/* Bit in SWRST that indicates boot caused by watchdog */ -#define SWRST_RESET_WDOG 0x4000 - -/* Bit in WDOG_CTL that indicates watchdog has expired (WDR0) */ -#define WDOG_EXPIRED 0x8000 - -/* Masks for WDEV field in WDOG_CTL register */ -#define ICTL_RESET 0x0 -#define ICTL_NMI 0x2 -#define ICTL_GPI 0x4 -#define ICTL_NONE 0x6 -#define ICTL_MASK 0x6 - -/* Masks for WDEN field in WDOG_CTL register */ -#define WDEN_MASK 0x0FF0 -#define WDEN_ENABLE 0x0000 -#define WDEN_DISABLE 0x0AD0 - /* some defaults */ #define WATCHDOG_TIMEOUT 20 diff --git a/drivers/watchdog/booke_wdt.c b/drivers/watchdog/booke_wdt.c index 801ead19149..3d49671cdf5 100644 --- a/drivers/watchdog/booke_wdt.c +++ b/drivers/watchdog/booke_wdt.c @@ -137,12 +137,12 @@ static long booke_wdt_ioctl(struct file *file, if (copy_to_user((void *)arg, &ident, sizeof(ident))) return -EFAULT; case WDIOC_GETSTATUS: - return put_user(ident.options, p); + return put_user(0, p); case WDIOC_GETBOOTSTATUS: /* XXX: something is clearing TSR */ tmp = mfspr(SPRN_TSR) & TSR_WRS(3); - /* returns 1 if last reset was caused by the WDT */ - return (tmp ? 1 : 0); + /* returns CARDRESET if last reset was caused by the WDT */ + return (tmp ? WDIOF_CARDRESET : 0); case WDIOC_SETOPTIONS: if (get_user(tmp, p)) return -EINVAL; diff --git a/drivers/watchdog/eurotechwdt.c b/drivers/watchdog/eurotechwdt.c index d1c4e55b1db..3f3dc093ad6 100644 --- a/drivers/watchdog/eurotechwdt.c +++ b/drivers/watchdog/eurotechwdt.c @@ -68,7 +68,6 @@ static spinlock_t eurwdt_lock; /* * You must set these - there is no sane way to probe for this board. - * You can use eurwdt=x,y to set these now. */ static int io = 0x3f0; diff --git a/drivers/watchdog/iTCO_vendor_support.c b/drivers/watchdog/iTCO_vendor_support.c index 5133bca5ccb..481d1ad4346 100644 --- a/drivers/watchdog/iTCO_vendor_support.c +++ b/drivers/watchdog/iTCO_vendor_support.c @@ -101,13 +101,6 @@ static void supermicro_old_pre_stop(unsigned long acpibase) outl(val32, SMI_EN); /* Needed to deactivate watchdog */ } -static void supermicro_old_pre_keepalive(unsigned long acpibase) -{ - /* Reload TCO Timer (done in iTCO_wdt_keepalive) + */ - /* Clear "Expire Flag" (Bit 3 of TC01_STS register) */ - outb(0x08, TCO1_STS); -} - /* * Vendor Support: 2 * Board: Super Micro Computer Inc. P4SBx, P4DPx @@ -337,9 +330,7 @@ EXPORT_SYMBOL(iTCO_vendor_pre_stop); void iTCO_vendor_pre_keepalive(unsigned long acpibase, unsigned int heartbeat) { - if (vendorsupport == SUPERMICRO_OLD_BOARD) - supermicro_old_pre_keepalive(acpibase); - else if (vendorsupport == SUPERMICRO_NEW_BOARD) + if (vendorsupport == SUPERMICRO_NEW_BOARD) supermicro_new_pre_set_heartbeat(heartbeat); } EXPORT_SYMBOL(iTCO_vendor_pre_keepalive); diff --git a/drivers/watchdog/iTCO_wdt.c b/drivers/watchdog/iTCO_wdt.c index 8da88603537..69de8713b8e 100644 --- a/drivers/watchdog/iTCO_wdt.c +++ b/drivers/watchdog/iTCO_wdt.c @@ -40,7 +40,7 @@ /* Module and version information */ #define DRV_NAME "iTCO_wdt" -#define DRV_VERSION "1.05" +#define DRV_VERSION "1.06" #define PFX DRV_NAME ": " /* Includes */ @@ -391,8 +391,8 @@ static struct platform_device *iTCO_wdt_platform_device; #define WATCHDOG_HEARTBEAT 30 /* 30 sec default heartbeat */ static int heartbeat = WATCHDOG_HEARTBEAT; /* in seconds */ module_param(heartbeat, int, 0); -MODULE_PARM_DESC(heartbeat, "Watchdog heartbeat in seconds. " - "(2<heartbeat<39 (TCO v1) or 613 (TCO v2), default=" +MODULE_PARM_DESC(heartbeat, "Watchdog timeout in seconds. " + "5..76 (TCO v1) or 3..614 (TCO v2), default=" __MODULE_STRING(WATCHDOG_HEARTBEAT) ")"); static int nowayout = WATCHDOG_NOWAYOUT; @@ -523,8 +523,13 @@ static int iTCO_wdt_keepalive(void) /* Reload the timer by writing to the TCO Timer Counter register */ if (iTCO_wdt_private.iTCO_version == 2) outw(0x01, TCO_RLD); - else if (iTCO_wdt_private.iTCO_version == 1) + else if (iTCO_wdt_private.iTCO_version == 1) { + /* Reset the timeout status bit so that the timer + * needs to count down twice again before rebooting */ + outw(0x0008, TCO1_STS); /* write 1 to clear bit */ + outb(0x01, TCO_RLD); + } spin_unlock(&iTCO_wdt_private.io_lock); return 0; @@ -537,6 +542,11 @@ static int iTCO_wdt_set_heartbeat(int t) unsigned int tmrval; tmrval = seconds_to_ticks(t); + + /* For TCO v1 the timer counts down twice before rebooting */ + if (iTCO_wdt_private.iTCO_version == 1) + tmrval /= 2; + /* from the specs: */ /* "Values of 0h-3h are ignored and should not be attempted" */ if (tmrval < 0x04) @@ -593,6 +603,8 @@ static int iTCO_wdt_get_timeleft(int *time_left) spin_lock(&iTCO_wdt_private.io_lock); val8 = inb(TCO_RLD); val8 &= 0x3f; + if (!(inw(TCO1_STS) & 0x0008)) + val8 += (inb(TCOv1_TMR) & 0x3f); spin_unlock(&iTCO_wdt_private.io_lock); *time_left = (val8 * 6) / 10; @@ -832,9 +844,9 @@ static int __devinit iTCO_wdt_init(struct pci_dev *pdev, TCOBASE); /* Clear out the (probably old) status */ - outb(8, TCO1_STS); /* Clear the Time Out Status bit */ - outb(2, TCO2_STS); /* Clear SECOND_TO_STS bit */ - outb(4, TCO2_STS); /* Clear BOOT_STS bit */ + outw(0x0008, TCO1_STS); /* Clear the Time Out Status bit */ + outw(0x0002, TCO2_STS); /* Clear SECOND_TO_STS bit */ + outw(0x0004, TCO2_STS); /* Clear BOOT_STS bit */ /* Make sure the watchdog is not running */ iTCO_wdt_stop(); @@ -844,8 +856,7 @@ static int __devinit iTCO_wdt_init(struct pci_dev *pdev, if (iTCO_wdt_set_heartbeat(heartbeat)) { iTCO_wdt_set_heartbeat(WATCHDOG_HEARTBEAT); printk(KERN_INFO PFX - "heartbeat value must be 2 < heartbeat < 39 (TCO v1) " - "or 613 (TCO v2), using %d\n", heartbeat); + "timeout value out of range, using %d\n", heartbeat); } ret = misc_register(&iTCO_wdt_miscdev); diff --git a/drivers/watchdog/imx2_wdt.c b/drivers/watchdog/imx2_wdt.c new file mode 100644 index 00000000000..ea25885781b --- /dev/null +++ b/drivers/watchdog/imx2_wdt.c @@ -0,0 +1,358 @@ +/* + * Watchdog driver for IMX2 and later processors + * + * Copyright (C) 2010 Wolfram Sang, Pengutronix e.K. <w.sang@pengutronix.de> + * + * some parts adapted by similar drivers from Darius Augulis and Vladimir + * Zapolskiy, additional improvements by Wim Van Sebroeck. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + * + * NOTE: MX1 has a slightly different Watchdog than MX2 and later: + * + * MX1: MX2+: + * ---- ----- + * Registers: 32-bit 16-bit + * Stopable timer: Yes No + * Need to enable clk: No Yes + * Halt on suspend: Manual Can be automatic + */ + +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/miscdevice.h> +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/platform_device.h> +#include <linux/watchdog.h> +#include <linux/clk.h> +#include <linux/fs.h> +#include <linux/io.h> +#include <linux/uaccess.h> +#include <linux/timer.h> +#include <linux/jiffies.h> +#include <mach/hardware.h> + +#define DRIVER_NAME "imx2-wdt" + +#define IMX2_WDT_WCR 0x00 /* Control Register */ +#define IMX2_WDT_WCR_WT (0xFF << 8) /* -> Watchdog Timeout Field */ +#define IMX2_WDT_WCR_WRE (1 << 3) /* -> WDOG Reset Enable */ +#define IMX2_WDT_WCR_WDE (1 << 2) /* -> Watchdog Enable */ + +#define IMX2_WDT_WSR 0x02 /* Service Register */ +#define IMX2_WDT_SEQ1 0x5555 /* -> service sequence 1 */ +#define IMX2_WDT_SEQ2 0xAAAA /* -> service sequence 2 */ + +#define IMX2_WDT_MAX_TIME 128 +#define IMX2_WDT_DEFAULT_TIME 60 /* in seconds */ + +#define WDOG_SEC_TO_COUNT(s) ((s * 2 - 1) << 8) + +#define IMX2_WDT_STATUS_OPEN 0 +#define IMX2_WDT_STATUS_STARTED 1 +#define IMX2_WDT_EXPECT_CLOSE 2 + +static struct { + struct clk *clk; + void __iomem *base; + unsigned timeout; + unsigned long status; + struct timer_list timer; /* Pings the watchdog when closed */ +} imx2_wdt; + +static struct miscdevice imx2_wdt_miscdev; + +static int nowayout = WATCHDOG_NOWAYOUT; +module_param(nowayout, int, 0); +MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" + __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); + + +static unsigned timeout = IMX2_WDT_DEFAULT_TIME; +module_param(timeout, uint, 0); +MODULE_PARM_DESC(timeout, "Watchdog timeout in seconds (default=" + __MODULE_STRING(IMX2_WDT_DEFAULT_TIME) ")"); + +static const struct watchdog_info imx2_wdt_info = { + .identity = "imx2+ watchdog", + .options = WDIOF_KEEPALIVEPING | WDIOF_SETTIMEOUT | WDIOF_MAGICCLOSE, +}; + +static inline void imx2_wdt_setup(void) +{ + u16 val = __raw_readw(imx2_wdt.base + IMX2_WDT_WCR); + + /* Strip the old watchdog Time-Out value */ + val &= ~IMX2_WDT_WCR_WT; + /* Generate reset if WDOG times out */ + val &= ~IMX2_WDT_WCR_WRE; + /* Keep Watchdog Disabled */ + val &= ~IMX2_WDT_WCR_WDE; + /* Set the watchdog's Time-Out value */ + val |= WDOG_SEC_TO_COUNT(imx2_wdt.timeout); + + __raw_writew(val, imx2_wdt.base + IMX2_WDT_WCR); + + /* enable the watchdog */ + val |= IMX2_WDT_WCR_WDE; + __raw_writew(val, imx2_wdt.base + IMX2_WDT_WCR); +} + +static inline void imx2_wdt_ping(void) +{ + __raw_writew(IMX2_WDT_SEQ1, imx2_wdt.base + IMX2_WDT_WSR); + __raw_writew(IMX2_WDT_SEQ2, imx2_wdt.base + IMX2_WDT_WSR); +} + +static void imx2_wdt_timer_ping(unsigned long arg) +{ + /* ping it every imx2_wdt.timeout / 2 seconds to prevent reboot */ + imx2_wdt_ping(); + mod_timer(&imx2_wdt.timer, jiffies + imx2_wdt.timeout * HZ / 2); +} + +static void imx2_wdt_start(void) +{ + if (!test_and_set_bit(IMX2_WDT_STATUS_STARTED, &imx2_wdt.status)) { + /* at our first start we enable clock and do initialisations */ + clk_enable(imx2_wdt.clk); + + imx2_wdt_setup(); + } else /* delete the timer that pings the watchdog after close */ + del_timer_sync(&imx2_wdt.timer); + + /* Watchdog is enabled - time to reload the timeout value */ + imx2_wdt_ping(); +} + +static void imx2_wdt_stop(void) +{ + /* we don't need a clk_disable, it cannot be disabled once started. + * We use a timer to ping the watchdog while /dev/watchdog is closed */ + imx2_wdt_timer_ping(0); +} + +static void imx2_wdt_set_timeout(int new_timeout) +{ + u16 val = __raw_readw(imx2_wdt.base + IMX2_WDT_WCR); + + /* set the new timeout value in the WSR */ + val &= ~IMX2_WDT_WCR_WT; + val |= WDOG_SEC_TO_COUNT(new_timeout); + __raw_writew(val, imx2_wdt.base + IMX2_WDT_WCR); +} + +static int imx2_wdt_open(struct inode *inode, struct file *file) +{ + if (test_and_set_bit(IMX2_WDT_STATUS_OPEN, &imx2_wdt.status)) + return -EBUSY; + + imx2_wdt_start(); + return nonseekable_open(inode, file); +} + +static int imx2_wdt_close(struct inode *inode, struct file *file) +{ + if (test_bit(IMX2_WDT_EXPECT_CLOSE, &imx2_wdt.status) && !nowayout) + imx2_wdt_stop(); + else { + dev_crit(imx2_wdt_miscdev.parent, + "Unexpected close: Expect reboot!\n"); + imx2_wdt_ping(); + } + + clear_bit(IMX2_WDT_EXPECT_CLOSE, &imx2_wdt.status); + clear_bit(IMX2_WDT_STATUS_OPEN, &imx2_wdt.status); + return 0; +} + +static long imx2_wdt_ioctl(struct file *file, unsigned int cmd, + unsigned long arg) +{ + void __user *argp = (void __user *)arg; + int __user *p = argp; + int new_value; + + switch (cmd) { + case WDIOC_GETSUPPORT: + return copy_to_user(argp, &imx2_wdt_info, + sizeof(struct watchdog_info)) ? -EFAULT : 0; + + case WDIOC_GETSTATUS: + case WDIOC_GETBOOTSTATUS: + return put_user(0, p); + + case WDIOC_KEEPALIVE: + imx2_wdt_ping(); + return 0; + + case WDIOC_SETTIMEOUT: + if (get_user(new_value, p)) + return -EFAULT; + if ((new_value < 1) || (new_value > IMX2_WDT_MAX_TIME)) + return -EINVAL; + imx2_wdt_set_timeout(new_value); + imx2_wdt.timeout = new_value; + imx2_wdt_ping(); + + /* Fallthrough to return current value */ + case WDIOC_GETTIMEOUT: + return put_user(imx2_wdt.timeout, p); + + default: + return -ENOTTY; + } +} + +static ssize_t imx2_wdt_write(struct file *file, const char __user *data, + size_t len, loff_t *ppos) +{ + size_t i; + char c; + + if (len == 0) /* Can we see this even ? */ + return 0; + + clear_bit(IMX2_WDT_EXPECT_CLOSE, &imx2_wdt.status); + /* scan to see whether or not we got the magic character */ + for (i = 0; i != len; i++) { + if (get_user(c, data + i)) + return -EFAULT; + if (c == 'V') + set_bit(IMX2_WDT_EXPECT_CLOSE, &imx2_wdt.status); + } + + imx2_wdt_ping(); + return len; +} + +static const struct file_operations imx2_wdt_fops = { + .owner = THIS_MODULE, + .llseek = no_llseek, + .unlocked_ioctl = imx2_wdt_ioctl, + .open = imx2_wdt_open, + .release = imx2_wdt_close, + .write = imx2_wdt_write, +}; + +static struct miscdevice imx2_wdt_miscdev = { + .minor = WATCHDOG_MINOR, + .name = "watchdog", + .fops = &imx2_wdt_fops, +}; + +static int __init imx2_wdt_probe(struct platform_device *pdev) +{ + int ret; + int res_size; + struct resource *res; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) { + dev_err(&pdev->dev, "can't get device resources\n"); + return -ENODEV; + } + + res_size = resource_size(res); + if (!devm_request_mem_region(&pdev->dev, res->start, res_size, + res->name)) { + dev_err(&pdev->dev, "can't allocate %d bytes at %d address\n", + res_size, res->start); + return -ENOMEM; + } + + imx2_wdt.base = devm_ioremap_nocache(&pdev->dev, res->start, res_size); + if (!imx2_wdt.base) { + dev_err(&pdev->dev, "ioremap failed\n"); + return -ENOMEM; + } + + imx2_wdt.clk = clk_get_sys("imx-wdt.0", NULL); + if (IS_ERR(imx2_wdt.clk)) { + dev_err(&pdev->dev, "can't get Watchdog clock\n"); + return PTR_ERR(imx2_wdt.clk); + } + + imx2_wdt.timeout = clamp_t(unsigned, timeout, 1, IMX2_WDT_MAX_TIME); + if (imx2_wdt.timeout != timeout) + dev_warn(&pdev->dev, "Initial timeout out of range! " + "Clamped from %u to %u\n", timeout, imx2_wdt.timeout); + + setup_timer(&imx2_wdt.timer, imx2_wdt_timer_ping, 0); + + imx2_wdt_miscdev.parent = &pdev->dev; + ret = misc_register(&imx2_wdt_miscdev); + if (ret) + goto fail; + + dev_info(&pdev->dev, + "IMX2+ Watchdog Timer enabled. timeout=%ds (nowayout=%d)\n", + imx2_wdt.timeout, nowayout); + return 0; + +fail: + imx2_wdt_miscdev.parent = NULL; + clk_put(imx2_wdt.clk); + return ret; +} + +static int __exit imx2_wdt_remove(struct platform_device *pdev) +{ + misc_deregister(&imx2_wdt_miscdev); + + if (test_bit(IMX2_WDT_STATUS_STARTED, &imx2_wdt.status)) { + del_timer_sync(&imx2_wdt.timer); + + dev_crit(imx2_wdt_miscdev.parent, + "Device removed: Expect reboot!\n"); + } else + clk_put(imx2_wdt.clk); + + imx2_wdt_miscdev.parent = NULL; + return 0; +} + +static void imx2_wdt_shutdown(struct platform_device *pdev) +{ + if (test_bit(IMX2_WDT_STATUS_STARTED, &imx2_wdt.status)) { + /* we are running, we need to delete the timer but will give + * max timeout before reboot will take place */ + del_timer_sync(&imx2_wdt.timer); + imx2_wdt_set_timeout(IMX2_WDT_MAX_TIME); + imx2_wdt_ping(); + + dev_crit(imx2_wdt_miscdev.parent, + "Device shutdown: Expect reboot!\n"); + } +} + +static struct platform_driver imx2_wdt_driver = { + .probe = imx2_wdt_probe, + .remove = __exit_p(imx2_wdt_remove), + .shutdown = imx2_wdt_shutdown, + .driver = { + .name = DRIVER_NAME, + .owner = THIS_MODULE, + }, +}; + +static int __init imx2_wdt_init(void) +{ + return platform_driver_probe(&imx2_wdt_driver, imx2_wdt_probe); +} +module_init(imx2_wdt_init); + +static void __exit imx2_wdt_exit(void) +{ + platform_driver_unregister(&imx2_wdt_driver); +} +module_exit(imx2_wdt_exit); + +MODULE_AUTHOR("Wolfram Sang"); +MODULE_DESCRIPTION("Watchdog driver for IMX2 and later"); +MODULE_LICENSE("GPL v2"); +MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR); +MODULE_ALIAS("platform:" DRIVER_NAME); diff --git a/drivers/watchdog/mpc8xxx_wdt.c b/drivers/watchdog/mpc8xxx_wdt.c index 7b55974191d..6622335773b 100644 --- a/drivers/watchdog/mpc8xxx_wdt.c +++ b/drivers/watchdog/mpc8xxx_wdt.c @@ -53,7 +53,7 @@ static int mpc8xxx_wdt_init_late(void); static u16 timeout = 0xffff; module_param(timeout, ushort, 0); MODULE_PARM_DESC(timeout, - "Watchdog timeout in ticks. (0<timeout<65536, default=65535"); + "Watchdog timeout in ticks. (0<timeout<65536, default=65535)"); static int reset = 1; module_param(reset, bool, 0); diff --git a/drivers/watchdog/pc87413_wdt.c b/drivers/watchdog/pc87413_wdt.c index d3aa2f1fe61..3a56bc36092 100644 --- a/drivers/watchdog/pc87413_wdt.c +++ b/drivers/watchdog/pc87413_wdt.c @@ -53,7 +53,9 @@ #define WDTO 0x11 /* Watchdog timeout register */ #define WDCFG 0x12 /* Watchdog config register */ -static int io = 0x2E; /* Address used on Portwell Boards */ +#define IO_DEFAULT 0x2E /* Address used on Portwell Boards */ + +static int io = IO_DEFAULT; static int timeout = DEFAULT_TIMEOUT; /* timeout value */ static unsigned long timer_enabled; /* is the timer enabled? */ @@ -583,12 +585,13 @@ MODULE_LICENSE("GPL"); MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR); module_param(io, int, 0); -MODULE_PARM_DESC(io, MODNAME " I/O port (default: " __MODULE_STRING(io) ")."); +MODULE_PARM_DESC(io, MODNAME " I/O port (default: " + __MODULE_STRING(IO_DEFAULT) ")."); module_param(timeout, int, 0); MODULE_PARM_DESC(timeout, "Watchdog timeout in minutes (default=" - __MODULE_STRING(timeout) ")."); + __MODULE_STRING(DEFAULT_TIMEOUT) ")."); module_param(nowayout, int, 0); MODULE_PARM_DESC(nowayout, diff --git a/drivers/watchdog/pnx833x_wdt.c b/drivers/watchdog/pnx833x_wdt.c index 09102f09e68..a7b5ad2a98b 100644 --- a/drivers/watchdog/pnx833x_wdt.c +++ b/drivers/watchdog/pnx833x_wdt.c @@ -33,6 +33,8 @@ #define PFX "pnx833x: " #define WATCHDOG_TIMEOUT 30 /* 30 sec Maximum timeout */ #define WATCHDOG_COUNT_FREQUENCY 68000000U /* Watchdog counts at 68MHZ. */ +#define PNX_WATCHDOG_TIMEOUT (WATCHDOG_TIMEOUT * WATCHDOG_COUNT_FREQUENCY) +#define PNX_TIMEOUT_VALUE 2040000000U /** CONFIG block */ #define PNX833X_CONFIG (0x07000U) @@ -47,20 +49,21 @@ static int pnx833x_wdt_alive; /* Set default timeout in MHZ.*/ -static int pnx833x_wdt_timeout = (WATCHDOG_TIMEOUT * WATCHDOG_COUNT_FREQUENCY); +static int pnx833x_wdt_timeout = PNX_WATCHDOG_TIMEOUT; module_param(pnx833x_wdt_timeout, int, 0); MODULE_PARM_DESC(timeout, "Watchdog timeout in Mhz. (68Mhz clock), default=" - __MODULE_STRING(pnx833x_wdt_timeout) "(30 seconds)."); + __MODULE_STRING(PNX_TIMEOUT_VALUE) "(30 seconds)."); static int nowayout = WATCHDOG_NOWAYOUT; module_param(nowayout, int, 0); MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); -static int start_enabled = 1; +#define START_DEFAULT 1 +static int start_enabled = START_DEFAULT; module_param(start_enabled, int, 0); MODULE_PARM_DESC(start_enabled, "Watchdog is started on module insertion " - "(default=" __MODULE_STRING(start_enabled) ")"); + "(default=" __MODULE_STRING(START_DEFAULT) ")"); static void pnx833x_wdt_start(void) { diff --git a/drivers/watchdog/s3c2410_wdt.c b/drivers/watchdog/s3c2410_wdt.c index e4cebef5517..300932580de 100644 --- a/drivers/watchdog/s3c2410_wdt.c +++ b/drivers/watchdog/s3c2410_wdt.c @@ -63,7 +63,7 @@ module_param(nowayout, int, 0); module_param(soft_noboot, int, 0); module_param(debug, int, 0); -MODULE_PARM_DESC(tmr_margin, "Watchdog tmr_margin in seconds. default=" +MODULE_PARM_DESC(tmr_margin, "Watchdog tmr_margin in seconds. (default=" __MODULE_STRING(CONFIG_S3C2410_WATCHDOG_DEFAULT_TIME) ")"); MODULE_PARM_DESC(tmr_atboot, "Watchdog is started at boot time if set to 1, default=" @@ -71,8 +71,8 @@ MODULE_PARM_DESC(tmr_atboot, MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); MODULE_PARM_DESC(soft_noboot, "Watchdog action, set to 1 to ignore reboots, " - "0 to reboot (default depends on ONLY_TESTING)"); -MODULE_PARM_DESC(debug, "Watchdog debug, set to >1 for debug, (default 0)"); + "0 to reboot (default 0)"); +MODULE_PARM_DESC(debug, "Watchdog debug, set to >1 for debug (default 0)"); static unsigned long open_lock; static struct device *wdt_dev; /* platform device attached to */ @@ -426,8 +426,7 @@ static int __devinit s3c2410wdt_probe(struct platform_device *pdev) wdt_mem = request_mem_region(res->start, size, pdev->name); if (wdt_mem == NULL) { dev_err(dev, "failed to get memory region\n"); - ret = -ENOENT; - goto err_req; + return -EBUSY; } wdt_base = ioremap(res->start, size); diff --git a/drivers/watchdog/shwdt.c b/drivers/watchdog/shwdt.c index a03f84e5ee1..6fc74065abe 100644 --- a/drivers/watchdog/shwdt.c +++ b/drivers/watchdog/shwdt.c @@ -496,7 +496,7 @@ MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR); module_param(clock_division_ratio, int, 0); MODULE_PARM_DESC(clock_division_ratio, "Clock division ratio. Valid ranges are from 0x5 (1.31ms) " - "to 0x7 (5.25ms). (default=" __MODULE_STRING(clock_division_ratio) ")"); + "to 0x7 (5.25ms). (default=" __MODULE_STRING(WTCSR_CKS_4096) ")"); module_param(heartbeat, int, 0); MODULE_PARM_DESC(heartbeat, diff --git a/drivers/watchdog/twl4030_wdt.c b/drivers/watchdog/twl4030_wdt.c index dcabe77ad14..b5045ca7e61 100644 --- a/drivers/watchdog/twl4030_wdt.c +++ b/drivers/watchdog/twl4030_wdt.c @@ -190,6 +190,8 @@ static int __devinit twl4030_wdt_probe(struct platform_device *pdev) twl4030_wdt_dev = pdev; + twl4030_wdt_disable(wdt); + ret = misc_register(&wdt->miscdev); if (ret) { dev_err(wdt->miscdev.parent, diff --git a/drivers/watchdog/wdt.c b/drivers/watchdog/wdt.c index bfda2e99dd8..552a4381e78 100644 --- a/drivers/watchdog/wdt.c +++ b/drivers/watchdog/wdt.c @@ -91,7 +91,7 @@ MODULE_PARM_DESC(tachometer, static int type = 500; module_param(type, int, 0); MODULE_PARM_DESC(type, - "WDT501-P Card type (500 or 501 , default=500)"); + "WDT501-P Card type (500 or 501, default=500)"); /* * Programming support diff --git a/drivers/watchdog/wdt977.c b/drivers/watchdog/wdt977.c index 90ef70eb47d..5c2521fc836 100644 --- a/drivers/watchdog/wdt977.c +++ b/drivers/watchdog/wdt977.c @@ -63,7 +63,7 @@ static char expect_close; static DEFINE_SPINLOCK(spinlock); module_param(timeout, int, 0); -MODULE_PARM_DESC(timeout, "Watchdog timeout in seconds (60..15300), default=" +MODULE_PARM_DESC(timeout, "Watchdog timeout in seconds (60..15300, default=" __MODULE_STRING(DEFAULT_TIMEOUT) ")"); module_param(testmode, int, 0); MODULE_PARM_DESC(testmode, "Watchdog testmode (1 = no reboot), default=0"); |