aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
Diffstat
-rw-r--r--Documentation/watchdog/src/watchdog-simple.c2
-rw-r--r--arch/arm/configs/at91rm9200dk_defconfig2
-rw-r--r--arch/arm/configs/at91rm9200ek_defconfig2
-rw-r--r--arch/arm/configs/csb337_defconfig2
-rw-r--r--arch/arm/configs/csb637_defconfig2
-rw-r--r--arch/arm/configs/kafa_defconfig2
-rw-r--r--arch/arm/configs/onearm_defconfig2
-rw-r--r--drivers/char/watchdog/Kconfig65
-rw-r--r--drivers/char/watchdog/Makefile4
-rw-r--r--drivers/char/watchdog/at91rm9200_wdt.c (renamed from drivers/char/watchdog/at91_wdt.c)0
-rw-r--r--drivers/char/watchdog/iTCO_wdt.c21
-rw-r--r--drivers/char/watchdog/s3c2410_wdt.c5
-rw-r--r--drivers/char/watchdog/smsc37b787_wdt.c627
-rw-r--r--drivers/char/watchdog/w83627hf_wdt.c8
-rw-r--r--drivers/char/watchdog/w83697hf_wdt.c450
15 files changed, 1170 insertions, 24 deletions
diff --git a/Documentation/watchdog/src/watchdog-simple.c b/Documentation/watchdog/src/watchdog-simple.c
index 85cf17c4866..47801bc7e74 100644
--- a/Documentation/watchdog/src/watchdog-simple.c
+++ b/Documentation/watchdog/src/watchdog-simple.c
@@ -1,4 +1,6 @@
+#include <stdio.h>
#include <stdlib.h>
+#include <unistd.h>
#include <fcntl.h>
int main(int argc, const char *argv[]) {
diff --git a/arch/arm/configs/at91rm9200dk_defconfig b/arch/arm/configs/at91rm9200dk_defconfig
index c82e4667f45..b43041476e0 100644
--- a/arch/arm/configs/at91rm9200dk_defconfig
+++ b/arch/arm/configs/at91rm9200dk_defconfig
@@ -577,7 +577,7 @@ CONFIG_WATCHDOG_NOWAYOUT=y
# Watchdog Device Drivers
#
# CONFIG_SOFT_WATCHDOG is not set
-CONFIG_AT91_WATCHDOG=y
+CONFIG_AT91RM9200_WATCHDOG=y
#
# USB-based Watchdog Cards
diff --git a/arch/arm/configs/at91rm9200ek_defconfig b/arch/arm/configs/at91rm9200ek_defconfig
index b983fc59aa4..d96fc8386e2 100644
--- a/arch/arm/configs/at91rm9200ek_defconfig
+++ b/arch/arm/configs/at91rm9200ek_defconfig
@@ -558,7 +558,7 @@ CONFIG_WATCHDOG_NOWAYOUT=y
# Watchdog Device Drivers
#
# CONFIG_SOFT_WATCHDOG is not set
-CONFIG_AT91_WATCHDOG=y
+CONFIG_AT91RM9200_WATCHDOG=y
#
# USB-based Watchdog Cards
diff --git a/arch/arm/configs/csb337_defconfig b/arch/arm/configs/csb337_defconfig
index a2d6fd398f1..20e68250d83 100644
--- a/arch/arm/configs/csb337_defconfig
+++ b/arch/arm/configs/csb337_defconfig
@@ -615,7 +615,7 @@ CONFIG_WATCHDOG_NOWAYOUT=y
# Watchdog Device Drivers
#
# CONFIG_SOFT_WATCHDOG is not set
-CONFIG_AT91_WATCHDOG=y
+CONFIG_AT91RM9200_WATCHDOG=y
#
# USB-based Watchdog Cards
diff --git a/arch/arm/configs/csb637_defconfig b/arch/arm/configs/csb637_defconfig
index 2a1ac6c60ab..df8595ac031 100644
--- a/arch/arm/configs/csb637_defconfig
+++ b/arch/arm/configs/csb637_defconfig
@@ -615,7 +615,7 @@ CONFIG_WATCHDOG_NOWAYOUT=y
# Watchdog Device Drivers
#
# CONFIG_SOFT_WATCHDOG is not set
-CONFIG_AT91_WATCHDOG=y
+CONFIG_AT91RM9200_WATCHDOG=y
#
# USB-based Watchdog Cards
diff --git a/arch/arm/configs/kafa_defconfig b/arch/arm/configs/kafa_defconfig
index 54fcd75779d..a4cdafc1548 100644
--- a/arch/arm/configs/kafa_defconfig
+++ b/arch/arm/configs/kafa_defconfig
@@ -560,7 +560,7 @@ CONFIG_WATCHDOG_NOWAYOUT=y
# Watchdog Device Drivers
#
# CONFIG_SOFT_WATCHDOG is not set
-CONFIG_AT91_WATCHDOG=y
+CONFIG_AT91RM9200_WATCHDOG=y
# CONFIG_NVRAM is not set
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
diff --git a/arch/arm/configs/onearm_defconfig b/arch/arm/configs/onearm_defconfig
index cb1d94f9049..9b9f2155af3 100644
--- a/arch/arm/configs/onearm_defconfig
+++ b/arch/arm/configs/onearm_defconfig
@@ -607,7 +607,7 @@ CONFIG_WATCHDOG_NOWAYOUT=y
# Watchdog Device Drivers
#
# CONFIG_SOFT_WATCHDOG is not set
-CONFIG_AT91_WATCHDOG=y
+CONFIG_AT91RM9200_WATCHDOG=y
#
# USB-based Watchdog Cards
diff --git a/drivers/char/watchdog/Kconfig b/drivers/char/watchdog/Kconfig
index 89e46d6dfc4..0187b118532 100644
--- a/drivers/char/watchdog/Kconfig
+++ b/drivers/char/watchdog/Kconfig
@@ -13,7 +13,7 @@ config WATCHDOG
subsequently opening the file and then failing to write to it for
longer than 1 minute will result in rebooting the machine. This
could be useful for a networked machine that needs to come back
- online as fast as possible after a lock-up. There's both a watchdog
+ on-line as fast as possible after a lock-up. There's both a watchdog
implementation entirely in software (which can sometimes fail to
reboot the machine) and a driver for hardware watchdog boards, which
are more robust and can also keep track of the temperature inside
@@ -60,7 +60,7 @@ config SOFT_WATCHDOG
# ARM Architecture
-config AT91_WATCHDOG
+config AT91RM9200_WATCHDOG
tristate "AT91RM9200 watchdog"
depends on WATCHDOG && ARCH_AT91RM9200
help
@@ -71,7 +71,7 @@ config 21285_WATCHDOG
tristate "DC21285 watchdog"
depends on WATCHDOG && FOOTBRIDGE
help
- The Intel Footbridge chip contains a builtin watchdog circuit. Say Y
+ The Intel Footbridge chip contains a built-in watchdog circuit. Say Y
here if you wish to use this. Alternatively say M to compile the
driver as a module, which will be called wdt285.
@@ -269,11 +269,11 @@ config IB700_WDT
Most people will say N.
config IBMASR
- tristate "IBM Automatic Server Restart"
- depends on WATCHDOG && X86
- help
+ tristate "IBM Automatic Server Restart"
+ depends on WATCHDOG && X86
+ help
This is the driver for the IBM Automatic Server Restart watchdog
- timer builtin into some eServer xSeries machines.
+ timer built-in into some eServer xSeries machines.
To compile this driver as a module, choose M here: the
module will be called ibmasr.
@@ -316,13 +316,16 @@ config I8XX_TCO
To compile this driver as a module, choose M here: the
module will be called i8xx_tco.
+ Note: This driver will be removed in the near future. Please
+ use the Intel TCO Timer/Watchdog driver.
+
config ITCO_WDT
- tristate "Intel TCO Timer/Watchdog (EXPERIMENTAL)"
- depends on WATCHDOG && (X86 || IA64) && PCI && EXPERIMENTAL
+ tristate "Intel TCO Timer/Watchdog"
+ depends on WATCHDOG && (X86 || IA64) && PCI
---help---
Hardware driver for the intel TCO timer based watchdog devices.
These drivers are included in the Intel 82801 I/O Controller
- Hub family 'from ICH0 up to ICH7) and in the Intel 6300ESB
+ Hub family (from ICH0 up to ICH8) and in the Intel 6300ESB
controller hub.
The TCO (Total Cost of Ownership) timer is a watchdog timer
@@ -395,6 +398,26 @@ config CPU5_WDT
To compile this driver as a module, choose M here: the
module will be called cpu5wdt.
+config SMSC37B787_WDT
+ tristate "Winbond SMsC37B787 Watchdog Timer"
+ depends on WATCHDOG && X86
+ ---help---
+ This is the driver for the hardware watchdog component on the
+ Winbond SMsC37B787 chipset as used on the NetRunner Mainboard
+ from Vision Systems and maybe others.
+
+ This watchdog simply watches your kernel to make sure it doesn't
+ freeze, and if it does, it reboots your computer after a certain
+ amount of time.
+
+ Usually a userspace daemon will notify the kernel WDT driver that
+ userspace is still alive, at regular intervals.
+
+ To compile this driver as a module, choose M here: the
+ module will be called smsc37b787_wdt.
+
+ Most people will say N.
+
config W83627HF_WDT
tristate "W83627HF Watchdog Timer"
depends on WATCHDOG && X86
@@ -410,6 +433,21 @@ config W83627HF_WDT
Most people will say N.
+config W83697HF_WDT
+ tristate "W83697HF/W83697HG Watchdog Timer"
+ depends on WATCHDOG && X86
+ ---help---
+ This is the driver for the hardware watchdog on the W83697HF/HG
+ chipset as used in Dedibox/VIA motherboards (and likely others).
+ This watchdog simply watches your kernel to make sure it doesn't
+ freeze, and if it does, it reboots your computer after a certain
+ amount of time.
+
+ To compile this driver as a module, choose M here: the
+ module will be called w83697hf_wdt.
+
+ Most people will say N.
+
config W83877F_WDT
tristate "W83877F (EMACS) Watchdog Timer"
depends on WATCHDOG && X86
@@ -443,7 +481,7 @@ config MACHZ_WDT
depends on WATCHDOG && X86
---help---
If you are using a ZF Micro MachZ processor, say Y here, otherwise
- N. This is the driver for the watchdog timer builtin on that
+ N. This is the driver for the watchdog timer built-in on that
processor using ZF-Logic interface. This watchdog simply watches
your kernel to make sure it doesn't freeze, and if it does, it
reboots your computer after a certain amount of time.
@@ -472,7 +510,6 @@ config SBC_EPX_C3_WATCHDOG
To compile this driver as a module, choose M here: the
module will be called sbc_epx_c3.
-
# PowerPC Architecture
config 8xx_WDT
@@ -502,7 +539,7 @@ config WATCHDOG_RTAS
help
This driver adds watchdog support for the RTAS watchdog.
- To compile this driver as a module, choose M here. The module
+ To compile this driver as a module, choose M here. The module
will be called wdrtas.
# MIPS Architecture
@@ -556,7 +593,7 @@ config SH_WDT_MMAP
help
If you say Y here, user applications will be able to mmap the
WDT/CPG registers.
-#
+
# SPARC64 Architecture
config WATCHDOG_CP1XXX
diff --git a/drivers/char/watchdog/Makefile b/drivers/char/watchdog/Makefile
index 7f70abad465..36440497047 100644
--- a/drivers/char/watchdog/Makefile
+++ b/drivers/char/watchdog/Makefile
@@ -23,7 +23,7 @@ obj-$(CONFIG_WDTPCI) += wdt_pci.o
obj-$(CONFIG_USBPCWATCHDOG) += pcwd_usb.o
# ARM Architecture
-obj-$(CONFIG_AT91_WATCHDOG) += at91_wdt.o
+obj-$(CONFIG_AT91RM9200_WATCHDOG) += at91rm9200_wdt.o
obj-$(CONFIG_OMAP_WATCHDOG) += omap_wdt.o
obj-$(CONFIG_21285_WATCHDOG) += wdt285.o
obj-$(CONFIG_977_WATCHDOG) += wdt977.o
@@ -53,7 +53,9 @@ obj-$(CONFIG_SCx200_WDT) += scx200_wdt.o
obj-$(CONFIG_60XX_WDT) += sbc60xxwdt.o
obj-$(CONFIG_SBC8360_WDT) += sbc8360.o
obj-$(CONFIG_CPU5_WDT) += cpu5wdt.o
+obj-$(CONFIG_SMSC37B787_WDT) += smsc37b787_wdt.o
obj-$(CONFIG_W83627HF_WDT) += w83627hf_wdt.o
+obj-$(CONFIG_W83697HF_WDT) += w83697hf_wdt.o
obj-$(CONFIG_W83877F_WDT) += w83877f_wdt.o
obj-$(CONFIG_W83977F_WDT) += w83977f_wdt.o
obj-$(CONFIG_MACHZ_WDT) += machzwd.o
diff --git a/drivers/char/watchdog/at91_wdt.c b/drivers/char/watchdog/at91rm9200_wdt.c
index 4e7a1145e78..4e7a1145e78 100644
--- a/drivers/char/watchdog/at91_wdt.c
+++ b/drivers/char/watchdog/at91rm9200_wdt.c
diff --git a/drivers/char/watchdog/iTCO_wdt.c b/drivers/char/watchdog/iTCO_wdt.c
index aaac94db0d8..b6f29cb8bd3 100644
--- a/drivers/char/watchdog/iTCO_wdt.c
+++ b/drivers/char/watchdog/iTCO_wdt.c
@@ -35,6 +35,10 @@
* 82801GDH (ICH7DH) : document number 307013-002, 307014-009,
* 82801GBM (ICH7-M) : document number 307013-002, 307014-009,
* 82801GHM (ICH7-M DH) : document number 307013-002, 307014-009,
+ * 82801HB (ICH8) : document number 313056-002, 313057-004,
+ * 82801HR (ICH8R) : document number 313056-002, 313057-004,
+ * 82801HH (ICH8DH) : document number 313056-002, 313057-004,
+ * 82801HO (ICH8DO) : document number 313056-002, 313057-004,
* 6300ESB (6300ESB) : document number 300641-003
*/
@@ -45,7 +49,7 @@
/* Module and version information */
#define DRV_NAME "iTCO_wdt"
#define DRV_VERSION "1.00"
-#define DRV_RELDATE "30-Jul-2006"
+#define DRV_RELDATE "08-Oct-2006"
#define PFX DRV_NAME ": "
/* Includes */
@@ -85,6 +89,9 @@ enum iTCO_chipsets {
TCO_ICH7, /* ICH7 & ICH7R */
TCO_ICH7M, /* ICH7-M */
TCO_ICH7MDH, /* ICH7-M DH */
+ TCO_ICH8, /* ICH8 & ICH8R */
+ TCO_ICH8DH, /* ICH8DH */
+ TCO_ICH8DO, /* ICH8DO */
};
static struct {
@@ -108,6 +115,9 @@ static struct {
{"ICH7 or ICH7R", 2},
{"ICH7-M", 2},
{"ICH7-M DH", 2},
+ {"ICH8 or ICH8R", 2},
+ {"ICH8DH", 2},
+ {"ICH8DO", 2},
{NULL,0}
};
@@ -135,6 +145,9 @@ static struct pci_device_id iTCO_wdt_pci_tbl[] = {
{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH7_0, PCI_ANY_ID, PCI_ANY_ID, 0, 0, TCO_ICH7 },
{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH7_1, PCI_ANY_ID, PCI_ANY_ID, 0, 0, TCO_ICH7M },
{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH7_31, PCI_ANY_ID, PCI_ANY_ID, 0, 0, TCO_ICH7MDH },
+ { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH8_0, PCI_ANY_ID, PCI_ANY_ID, 0, 0, TCO_ICH8 },
+ { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH8_2, PCI_ANY_ID, PCI_ANY_ID, 0, 0, TCO_ICH8DH },
+ { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH8_3, PCI_ANY_ID, PCI_ANY_ID, 0, 0, TCO_ICH8DO },
{ 0, }, /* End of list */
};
MODULE_DEVICE_TABLE (pci, iTCO_wdt_pci_tbl);
@@ -355,7 +368,8 @@ static int iTCO_wdt_get_timeleft (int *time_left)
spin_unlock(&iTCO_wdt_private.io_lock);
*time_left = (val8 * 6) / 10;
- }
+ } else
+ return -EINVAL;
return 0;
}
@@ -426,7 +440,6 @@ static int iTCO_wdt_ioctl (struct inode *inode, struct file *file,
{
int new_options, retval = -EINVAL;
int new_heartbeat;
- int time_left;
void __user *argp = (void __user *)arg;
int __user *p = argp;
static struct watchdog_info ident = {
@@ -486,6 +499,8 @@ static int iTCO_wdt_ioctl (struct inode *inode, struct file *file,
case WDIOC_GETTIMELEFT:
{
+ int time_left;
+
if (iTCO_wdt_get_timeleft(&time_left))
return -EINVAL;
diff --git a/drivers/char/watchdog/s3c2410_wdt.c b/drivers/char/watchdog/s3c2410_wdt.c
index 68b1ca976d5..18cb050c386 100644
--- a/drivers/char/watchdog/s3c2410_wdt.c
+++ b/drivers/char/watchdog/s3c2410_wdt.c
@@ -380,18 +380,21 @@ static int s3c2410wdt_probe(struct platform_device *pdev)
res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
if (res == NULL) {
printk(KERN_INFO PFX "failed to get irq resource\n");
+ iounmap(wdt_base);
return -ENOENT;
}
ret = request_irq(res->start, s3c2410wdt_irq, 0, pdev->name, pdev);
if (ret != 0) {
printk(KERN_INFO PFX "failed to install irq (%d)\n", ret);
+ iounmap(wdt_base);
return ret;
}
wdt_clock = clk_get(&pdev->dev, "watchdog");
if (wdt_clock == NULL) {
printk(KERN_INFO PFX "failed to find watchdog clock source\n");
+ iounmap(wdt_base);
return -ENOENT;
}
@@ -415,6 +418,7 @@ static int s3c2410wdt_probe(struct platform_device *pdev)
if (ret) {
printk (KERN_ERR PFX "cannot register miscdev on minor=%d (%d)\n",
WATCHDOG_MINOR, ret);
+ iounmap(wdt_base);
return ret;
}
@@ -451,6 +455,7 @@ static int s3c2410wdt_remove(struct platform_device *dev)
wdt_clock = NULL;
}
+ iounmap(wdt_base);
misc_deregister(&s3c2410wdt_miscdev);
return 0;
}
diff --git a/drivers/char/watchdog/smsc37b787_wdt.c b/drivers/char/watchdog/smsc37b787_wdt.c
new file mode 100644
index 00000000000..9f56913b484
--- /dev/null
+++ b/drivers/char/watchdog/smsc37b787_wdt.c
@@ -0,0 +1,627 @@
+/*
+ * SMsC 37B787 Watchdog Timer driver for Linux 2.6.x.x
+ *
+ * Based on acquirewdt.c by Alan Cox <alan@redhat.com>
+ * and some other existing drivers
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ *
+ * The authors do NOT admit liability nor provide warranty for
+ * any of this software. This material is provided "AS-IS" in
+ * the hope that it may be useful for others.
+ *
+ * (C) Copyright 2003-2006 Sven Anders <anders@anduras.de>
+ *
+ * History:
+ * 2003 - Created version 1.0 for Linux 2.4.x.
+ * 2006 - Ported to Linux 2.6, added nowayout and MAGICCLOSE
+ * features. Released version 1.1
+ *
+ * Theory of operation:
+ *
+ * A Watchdog Timer (WDT) is a hardware circuit that can
+ * reset the computer system in case of a software fault.
+ * You probably knew that already.
+ *
+ * Usually a userspace daemon will notify the kernel WDT driver
+ * via the /dev/watchdog special device file that userspace is
+ * still alive, at regular intervals. When such a notification
+ * occurs, the driver will usually tell the hardware watchdog
+ * that everything is in order, and that the watchdog should wait
+ * for yet another little while to reset the system.
+ * If userspace fails (RAM error, kernel bug, whatever), the
+ * notifications cease to occur, and the hardware watchdog will
+ * reset the system (causing a reboot) after the timeout occurs.
+ *
+ * Create device with:
+ * mknod /dev/watchdog c 10 130
+ *
+ * For an example userspace keep-alive daemon, see:
+ * Documentation/watchdog/watchdog.txt
+ */
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/types.h>
+#include <linux/miscdevice.h>
+#include <linux/watchdog.h>
+#include <linux/delay.h>
+#include <linux/fs.h>
+#include <linux/ioport.h>
+#include <linux/notifier.h>
+#include <linux/reboot.h>
+#include <linux/init.h>
+#include <linux/spinlock.h>
+
+#include <asm/io.h>
+#include <asm/uaccess.h>
+#include <asm/system.h>
+
+/* enable support for minutes as units? */
+/* (does not always work correctly, so disabled by default!) */
+#define SMSC_SUPPORT_MINUTES
+#undef SMSC_SUPPORT_MINUTES
+
+#define MAX_TIMEOUT 255
+
+#define UNIT_SECOND 0
+#define UNIT_MINUTE 1
+
+#define MODNAME "smsc37b787_wdt: "
+#define VERSION "1.1"
+
+#define IOPORT 0x3F0
+#define IOPORT_SIZE 2
+#define IODEV_NO 8
+
+static int unit = UNIT_SECOND; /* timer's unit */
+static int timeout = 60; /* timeout value: default is 60 "units" */
+static unsigned long timer_enabled = 0; /* is the timer enabled? */
+
+static char expect_close; /* is the close expected? */
+
+static spinlock_t io_lock; /* to guard the watchdog from io races */
+
+static int nowayout = WATCHDOG_NOWAYOUT;
+
+/* -- Low level function ----------------------------------------*/
+
+/* unlock the IO chip */
+
+static inline void open_io_config(void)
+{
+ outb(0x55, IOPORT);
+ mdelay(1);
+ outb(0x55, IOPORT);
+}
+
+/* lock the IO chip */
+static inline void close_io_config(void)
+{
+ outb(0xAA, IOPORT);
+}
+
+/* select the IO device */
+static inline void select_io_device(unsigned char devno)
+{
+ outb(0x07, IOPORT);
+ outb(devno, IOPORT+1);
+}
+
+/* write to the control register */
+static inline void write_io_cr(unsigned char reg, unsigned char data)
+{
+ outb(reg, IOPORT);
+ outb(data, IOPORT+1);
+}
+
+/* read from the control register */
+static inline char read_io_cr(unsigned char reg)
+{
+ outb(reg, IOPORT);
+ return inb(IOPORT+1);
+}
+
+/* -- Medium level functions ------------------------------------*/
+
+static inline void gpio_bit12(unsigned char reg)
+{
+ // -- General Purpose I/O Bit 1.2 --
+ // Bit 0, In/Out: 0 = Output, 1 = Input
+ // Bit 1, Polarity: 0 = No Invert, 1 = Invert
+ // Bit 2, Group Enable Intr.: 0 = Disable, 1 = Enable
+ // Bit 3/4, Function select: 00 = GPI/O, 01 = WDT, 10 = P17,
+ // 11 = Either Edge Triggered Intr. 2
+ // Bit 5/6 (Reserved)
+ // Bit 7, Output Type: 0 = Push Pull Bit, 1 = Open Drain
+ write_io_cr(0xE2, reg);
+}
+
+static inline void gpio_bit13(unsigned char reg)
+{
+ // -- General Purpose I/O Bit 1.3 --
+ // Bit 0, In/Out: 0 = Output, 1 = Input
+ // Bit 1, Polarity: 0 = No Invert, 1 = Invert
+ // Bit 2, Group Enable Intr.: 0 = Disable, 1 = Enable
+ // Bit 3, Function select: 0 = GPI/O, 1 = LED
+ // Bit 4-6 (Reserved)
+ // Bit 7, Output Type: 0 = Push Pull Bit, 1 = Open Drain
+ write_io_cr(0xE3, reg);
+}
+
+static inline void wdt_timer_units(unsigned char new_units)
+{
+ // -- Watchdog timer units --
+ // Bit 0-6 (Reserved)
+ // Bit 7, WDT Time-out Value Units Select
+ // (0 = Minutes, 1 = Seconds)
+ write_io_cr(0xF1, new_units);
+}
+
+static inline void wdt_timeout_value(unsigned char new_timeout)
+{
+ // -- Watchdog Timer Time-out Value --
+ // Bit 0-7 Binary coded units (0=Disabled, 1..255)
+ write_io_cr(0xF2, new_timeout);
+}
+
+static inline void wdt_timer_conf(unsigned char conf)
+{
+ // -- Watchdog timer configuration --
+ // Bit 0 Joystick enable: 0* = No Reset, 1 = Reset WDT upon Gameport I/O
+ // Bit 1 Keyboard enable: 0* = No Reset, 1 = Reset WDT upon KBD Intr.
+ // Bit 2 Mouse enable: 0* = No Reset, 1 = Reset WDT upon Mouse Intr.
+ // Bit 3 Reset the timer
+ // (Wrong in SMsC documentation? Given as: PowerLED Timout Enabled)
+ // Bit 4-7 WDT Interrupt Mapping: (0000* = Disabled,
+ // 0001=IRQ1, 0010=(Invalid), 0011=IRQ3 to 1111=IRQ15)
+ write_io_cr(0xF3, conf);
+}
+
+static inline void wdt_timer_ctrl(unsigned char reg)
+{
+ // -- Watchdog timer control --
+ // Bit 0 Status Bit: 0 = Timer counting, 1 = Timeout occured
+ // Bit 1 Power LED Toggle: 0 = Disable Toggle, 1 = Toggle at 1 Hz
+ // Bit 2 Force Timeout: 1 = Forces WD timeout event (self-cleaning)
+ // Bit 3 P20 Force Timeout enabled:
+ // 0 = P20 activity does not generate the WD timeout event
+ // 1 = P20 Allows rising edge of P20, from the keyboard
+ // controller, to force the WD timeout event.
+ // Bit 4 (Reserved)
+ // -- Soft power management --
+ // Bit 5 Stop Counter: 1 = Stop software power down counter
+ // set via register 0xB8, (self-cleaning)
+ // (Upon read: 0 = Counter running, 1 = Counter stopped)
+ // Bit 6 Restart Counter: 1 = Restart software power down counter
+ // set via register 0xB8, (self-cleaning)
+ // Bit 7 SPOFF: 1 = Force software power down (self-cleaning)
+
+ write_io_cr(0xF4, reg);
+}
+
+/* -- Higher level functions ------------------------------------*/
+
+/* initialize watchdog */
+
+static void wb_smsc_wdt_initialize(void)
+{
+ unsigned char old;
+
+ spin_lock(&io_lock);
+ open_io_config();
+ select_io_device(IODEV_NO);
+
+ // enable the watchdog
+ gpio_bit13(0x08); // Select pin 80 = LED not GPIO
+ gpio_bit12(0x0A); // Set pin 79 = WDT not GPIO/Output/Polarity=Invert
+
+ // disable the timeout
+ wdt_timeout_value(0);
+
+ // reset control register
+ wdt_timer_ctrl(0x00);
+
+ // reset configuration register
+ wdt_timer_conf(0x00);
+
+ // read old (timer units) register
+ old = read_io_cr(0xF1) & 0x7F;
+ if (unit == UNIT_SECOND) old |= 0x80; // set to seconds
+
+ // set the watchdog timer units
+ wdt_timer_units(old);
+
+ close_io_config();
+ spin_unlock(&io_lock);
+}
+
+/* shutdown the watchdog */
+
+static void wb_smsc_wdt_shutdown(void)
+{
+ spin_lock(&io_lock);
+ open_io_config();
+ select_io_device(IODEV_NO);
+
+ // disable the watchdog
+ gpio_bit13(0x09);
+ gpio_bit12(0x09);
+
+ // reset watchdog config register
+ wdt_timer_conf(0x00);
+
+ // reset watchdog control register
+ wdt_timer_ctrl(0x00);
+
+ // disable timeout
+ wdt_timeout_value(0x00);
+
+ close_io_config();
+ spin_unlock(&io_lock);
+}
+
+/* set timeout => enable watchdog */
+
+static void wb_smsc_wdt_set_timeout(unsigned char new_timeout)
+{
+ spin_lock(&io_lock);
+ open_io_config();
+ select_io_device(IODEV_NO);
+
+ // set Power LED to blink, if we enable the timeout
+ wdt_timer_ctrl((new_timeout == 0) ? 0x00 : 0x02);
+
+ // set timeout value
+ wdt_timeout_value(new_timeout);
+
+ close_io_config();
+ spin_unlock(&io_lock);
+}
+
+/* get timeout */
+
+static unsigned char wb_smsc_wdt_get_timeout(void)
+{
+ unsigned char set_timeout;
+
+ spin_lock(&io_lock);
+ open_io_config();
+ select_io_device(IODEV_NO);
+ set_timeout = read_io_cr(0xF2);
+ close_io_config();
+ spin_unlock(&io_lock);
+
+ return set_timeout;
+}
+
+/* disable watchdog */
+
+static void wb_smsc_wdt_disable(void)
+{
+ // set the timeout to 0 to disable the watchdog
+ wb_smsc_wdt_set_timeout(0);
+}
+
+/* enable watchdog by setting the current timeout */
+
+static void wb_smsc_wdt_enable(void)
+{
+ // set the current timeout...
+ wb_smsc_wdt_set_timeout(timeout);
+}
+
+/* reset the timer */
+
+static void wb_smsc_wdt_reset_timer(void)
+{
+ spin_lock(&io_lock);
+ open_io_config();
+ select_io_device(IODEV_NO);
+
+ // reset the timer
+ wdt_timeout_value(timeout);
+ wdt_timer_conf(0x08);
+
+ close_io_config();
+ spin_unlock(&io_lock);
+}
+
+/* return, if the watchdog is enabled (timeout is set...) */
+
+static int wb_smsc_wdt_status(void)
+{
+ return (wb_smsc_wdt_get_timeout() == 0) ? 0 : WDIOF_KEEPALIVEPING;
+}
+
+
+/* -- File operations -------------------------------------------*/
+
+/* open => enable watchdog and set initial timeout */
+
+static int wb_smsc_wdt_open(struct inode *inode, struct file *file)
+{
+ /* /dev/watchdog can only be opened once */
+
+ if (test_and_set_bit(0, &timer_enabled))
+ return -EBUSY;
+
+ if (nowayout)
+ __module_get(THIS_MODULE);
+
+ /* Reload and activate timer */
+ wb_smsc_wdt_enable();
+
+ printk(KERN_INFO MODNAME "Watchdog enabled. Timeout set to %d %s.\n", timeout, (unit == UNIT_SECOND) ? "second(s)" : "minute(s)");
+
+ return nonseekable_open(inode, file);
+}
+
+/* close => shut off the timer */
+
+static int wb_smsc_wdt_release(struct inode *inode, struct file *file)
+{
+ /* Shut off the timer. */
+
+ if (expect_close == 42) {
+ wb_smsc_wdt_disable();
+ printk(KERN_INFO MODNAME "Watchdog disabled, sleeping again...\n");
+ } else {
+ printk(KERN_CRIT MODNAME "Unexpected close, not stopping watchdog!\n");
+ wb_smsc_wdt_reset_timer();
+ }
+
+ clear_bit(0, &timer_enabled);
+ expect_close = 0;
+ return 0;
+}
+
+/* write => update the timer to keep the machine alive */
+
+static ssize_t wb_smsc_wdt_write(struct file *file, const char __user *data,
+ size_t len, loff_t *ppos)
+{
+ /* See if we got the magic character 'V' and reload the timer */
+ if (len) {
+ if (!nowayout) {
+ size_t i;
+
+ /* reset expect flag */
+ expect_close = 0;
+
+ /* scan to see whether or not we got the magic character */
+ for (i = 0; i != len; i++) {
+ char c;
+ if (get_user(c, data+i))
+ return -EFAULT;
+ if (c == 'V')
+ expect_close = 42;
+ }
+ }
+
+ /* someone wrote to us, we should reload the timer */
+ wb_smsc_wdt_reset_timer();
+ }
+ return len;
+}
+
+/* ioctl => control interface */
+
+static int wb_smsc_wdt_ioctl(struct inode *inode, struct file *file,
+ unsigned int cmd, unsigned long arg)
+{
+ int new_timeout;
+
+ union {
+ struct watchdog_info __user *ident;
+ int __user *i;
+ } uarg;
+
+ static struct watchdog_info ident = {
+ .options = WDIOF_KEEPALIVEPING |
+ WDIOF_SETTIMEOUT |
+ WDIOF_MAGICCLOSE,
+ .firmware_version = 0,
+ .identity = "SMsC 37B787 Watchdog"
+ };
+
+ uarg.i = (int __user *)arg;
+
+ switch (cmd) {
+ default:
+ return -ENOTTY;
+
+ case WDIOC_GETSUPPORT:
+ return copy_to_user(uarg.ident, &ident,
+ sizeof(ident)) ? -EFAULT : 0;
+
+ case WDIOC_GETSTATUS:
+ return put_user(wb_smsc_wdt_status(), uarg.i);
+
+ case WDIOC_GETBOOTSTATUS:
+ return put_user(0, uarg.i);
+
+ case WDIOC_KEEPALIVE:
+ wb_smsc_wdt_reset_timer();
+ return 0;
+
+ case WDIOC_SETTIMEOUT:
+ if (get_user(new_timeout, uarg.i))
+ return -EFAULT;
+
+ // the API states this is given in secs
+ if (unit == UNIT_MINUTE)
+ new_timeout /= 60;
+
+ if (new_timeout < 0 || new_timeout > MAX_TIMEOUT)
+ return -EINVAL;
+
+ timeout = new_timeout;
+ wb_smsc_wdt_set_timeout(timeout);
+
+ // fall through and return the new timeout...
+
+ case WDIOC_GETTIMEOUT:
+
+ new_timeout = timeout;
+
+ if (unit == UNIT_MINUTE)
+ new_timeout *= 60;
+
+ return put_user(new_timeout, uarg.i);
+
+ case WDIOC_SETOPTIONS:
+ {
+ int options, retval = -EINVAL;
+
+ if (get_user(options, uarg.i))
+ return -EFAULT;
+
+ if (options & WDIOS_DISABLECARD) {
+ wb_smsc_wdt_disable();
+ retval = 0;
+ }
+
+ if (options & WDIOS_ENABLECARD) {
+ wb_smsc_wdt_enable();
+ retval = 0;
+ }
+
+ return retval;
+ }
+ }
+}
+
+/* -- Notifier funtions -----------------------------------------*/
+
+static int wb_smsc_wdt_notify_sys(struct notifier_block *this, unsigned long code, void *unused)
+{
+ if (code == SYS_DOWN || code == SYS_HALT)
+ {
+ // set timeout to 0, to avoid possible race-condition
+ timeout = 0;
+ wb_smsc_wdt_disable();
+ }
+ return NOTIFY_DONE;
+}
+
+/* -- Module's structures ---------------------------------------*/
+
+static struct file_operations wb_smsc_wdt_fops =
+{
+ .owner = THIS_MODULE,
+ .llseek = no_llseek,
+ .write = wb_smsc_wdt_write,
+ .ioctl = wb_smsc_wdt_ioctl,
+ .open = wb_smsc_wdt_open,
+ .release = wb_smsc_wdt_release,
+};
+
+static struct notifier_block wb_smsc_wdt_notifier =
+{
+ .notifier_call = wb_smsc_wdt_notify_sys,
+};
+
+static struct miscdevice wb_smsc_wdt_miscdev =
+{
+ .minor = WATCHDOG_MINOR,
+ .name = "watchdog",
+ .fops = &wb_smsc_wdt_fops,
+};
+
+/* -- Module init functions -------------------------------------*/
+
+/* module's "constructor" */
+
+static int __init wb_smsc_wdt_init(void)
+{
+ int ret;
+
+ spin_lock_init(&io_lock);
+
+ printk("SMsC 37B787 watchdog component driver " VERSION " initialising...\n");
+
+ if (!request_region(IOPORT, IOPORT_SIZE, "SMsC 37B787 watchdog")) {
+ printk(KERN_ERR MODNAME "Unable to register IO port %#x\n", IOPORT);
+ ret = -EBUSY;
+ goto out_pnp;
+ }
+
+ // set new maximum, if it's too big
+ if (timeout > MAX_TIMEOUT)
+ timeout = MAX_TIMEOUT;
+
+ // init the watchdog timer
+ wb_smsc_wdt_initialize();
+
+ ret = register_reboot_notifier(&wb_smsc_wdt_notifier);
+ if (ret) {
+ printk(KERN_ERR MODNAME "Unable to register reboot notifier err = %d\n", ret);
+ goto out_io;
+ }
+
+ ret = misc_register(&wb_smsc_wdt_miscdev);
+ if (ret) {
+ printk(KERN_ERR MODNAME "Unable to register miscdev on minor %d\n", WATCHDOG_MINOR);
+ goto out_rbt;
+ }
+
+ // output info
+ printk(KERN_INFO MODNAME "Timeout set to %d %s.\n", timeout, (unit == UNIT_SECOND) ? "second(s)" : "minute(s)");
+ printk(KERN_INFO MODNAME "Watchdog initialized and sleeping (nowayout=%d)...\n", nowayout);
+
+ // ret = 0
+
+out_clean:
+ return ret;
+
+out_rbt:
+ unregister_reboot_notifier(&wb_smsc_wdt_notifier);
+
+out_io:
+ release_region(IOPORT, IOPORT_SIZE);
+
+out_pnp:
+ goto out_clean;
+}
+
+/* module's "destructor" */
+
+static void __exit wb_smsc_wdt_exit(void)
+{
+ /* Stop the timer before we leave */
+ if (!nowayout)
+ {
+ wb_smsc_wdt_shutdown();
+ printk(KERN_INFO MODNAME "Watchdog disabled.\n");
+ }
+
+ misc_deregister(&wb_smsc_wdt_miscdev);
+ unregister_reboot_notifier(&wb_smsc_wdt_notifier);
+ release_region(IOPORT, IOPORT_SIZE);
+
+ printk("SMsC 37B787 watchdog component driver removed.\n");
+}
+
+module_init(wb_smsc_wdt_init);
+module_exit(wb_smsc_wdt_exit);
+
+MODULE_AUTHOR("Sven Anders <anders@anduras.de>");
+MODULE_DESCRIPTION("Driver for SMsC 37B787 watchdog component (Version " VERSION ")");
+MODULE_LICENSE("GPL");
+
+MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
+
+#ifdef SMSC_SUPPORT_MINUTES
+module_param(unit, int, 0);
+MODULE_PARM_DESC(unit, "set unit to use, 0=seconds or 1=minutes, default is 0");
+#endif
+
+module_param(timeout, int, 0);
+MODULE_PARM_DESC(timeout, "range is 1-255 units, default is 60");
+
+module_param(nowayout, int, 0);
+MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=CONFIG_WATCHDOG_NOWAYOUT)");
diff --git a/drivers/char/watchdog/w83627hf_wdt.c b/drivers/char/watchdog/w83627hf_wdt.c
index b4adc527e68..07d4bff2722 100644
--- a/drivers/char/watchdog/w83627hf_wdt.c
+++ b/drivers/char/watchdog/w83627hf_wdt.c
@@ -33,6 +33,7 @@
#include <linux/notifier.h>
#include <linux/reboot.h>
#include <linux/init.h>
+#include <linux/spinlock.h>
#include <asm/io.h>
#include <asm/uaccess.h>
@@ -44,6 +45,7 @@
static unsigned long wdt_is_open;
static char expect_close;
+static spinlock_t io_lock;
/* You must set this - there is no sane way to probe for this board. */
static int wdt_io = 0x2E;
@@ -110,12 +112,16 @@ w83627hf_init(void)
static void
wdt_ctrl(int timeout)
{
+ spin_lock(&io_lock);
+
w83627hf_select_wd_register();
outb_p(0xF6, WDT_EFER); /* Select CRF6 */
outb_p(timeout, WDT_EFDR); /* Write Timeout counter to CRF6 */
w83627hf_unselect_wd_register();
+
+ spin_unlock(&io_lock);
}
static int
@@ -303,6 +309,8 @@ wdt_init(void)
{
int ret;
+ spin_lock_init(&io_lock);
+
printk(KERN_INFO "WDT driver for the Winbond(TM) W83627HF Super I/O chip initialising.\n");
if (wdt_set_heartbeat(timeout)) {
diff --git a/drivers/char/watchdog/w83697hf_wdt.c b/drivers/char/watchdog/w83697hf_wdt.c
new file mode 100644
index 00000000000..7768b55487c
--- /dev/null
+++ b/drivers/char/watchdog/w83697hf_wdt.c
@@ -0,0 +1,450 @@
+/*
+ * w83697hf/hg WDT driver
+ *
+ * (c) Copyright 2006 Samuel Tardieu <sam@rfc1149.net>
+ * (c) Copyright 2006 Marcus Junker <junker@anduras.de>
+ *
+ * Based on w83627hf_wdt.c which is based on advantechwdt.c
+ * which is based on wdt.c.
+ * Original copyright messages:
+ *
+ * (c) Copyright 2003 Pádraig Brady <P@draigBrady.com>
+ *
+ * (c) Copyright 2000-2001 Marek Michalkiewicz <marekm@linux.org.pl>
+ *
+ * (c) Copyright 1996 Alan Cox <alan@redhat.com>, All Rights Reserved.
+ * http://www.redhat.com
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ *
+ * Neither Marcus Junker nor ANDURAS AG admit liability nor provide
+ * warranty for any of this software. This material is provided
+ * "AS-IS" and at no charge.
+ */
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/types.h>
+#include <linux/miscdevice.h>
+#include <linux/watchdog.h>
+#include <linux/fs.h>
+#include <linux/ioport.h>
+#include <linux/notifier.h>
+#include <linux/reboot.h>
+#include <linux/init.h>
+#include <linux/spinlock.h>
+
+#include <asm/io.h>
+#include <asm/uaccess.h>
+#include <asm/system.h>
+
+#define WATCHDOG_NAME "w83697hf/hg WDT"
+#define PFX WATCHDOG_NAME ": "
+#define WATCHDOG_TIMEOUT 60 /* 60 sec default timeout */
+
+static unsigned long wdt_is_open;
+static char expect_close;
+static spinlock_t io_lock;
+
+/* You must set this - there is no sane way to probe for this board. */
+static int wdt_io = 0x2e;
+module_param(wdt_io, int, 0);
+MODULE_PARM_DESC(wdt_io, "w83697hf/hg WDT io port (default 0x2e, 0 = autodetect)");
+
+static int timeout = WATCHDOG_TIMEOUT; /* in seconds */
+module_param(timeout, int, 0);
+MODULE_PARM_DESC(timeout, "Watchdog timeout in seconds. 1<= timeout <=255, default=" __MODULE_STRING(WATCHDOG_TIMEOUT) ".");
+
+static int nowayout = WATCHDOG_NOWAYOUT;
+module_param(nowayout, int, 0);
+MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=CONFIG_WATCHDOG_NOWAYOUT)");
+
+/*
+ * Kernel methods.
+ */
+
+#define W83697HF_EFER (wdt_io+0) /* Extended Function Enable Register */
+#define W83697HF_EFIR (wdt_io+0) /* Extended Function Index Register (same as EFER) */
+#define W83697HF_EFDR (wdt_io+1) /* Extended Function Data Register */
+
+static inline void
+w83697hf_unlock(void)
+{
+ outb_p(0x87, W83697HF_EFER); /* Enter extended function mode */
+ outb_p(0x87, W83697HF_EFER); /* Again according to manual */
+}
+
+static inline void
+w83697hf_lock(void)
+{
+ outb_p(0xAA, W83697HF_EFER); /* Leave extended function mode */
+}
+
+/*
+ * The three functions w83697hf_get_reg(), w83697hf_set_reg() and
+ * w83697hf_write_timeout() must be called with the device unlocked.
+ */
+
+static unsigned char
+w83697hf_get_reg(unsigned char reg)
+{
+ outb_p(reg, W83697HF_EFIR);
+ return inb_p(W83697HF_EFDR);
+}
+
+static void
+w83697hf_set_reg(unsigned char reg, unsigned char data)
+{
+ outb_p(reg, W83697HF_EFIR);
+ outb_p(data, W83697HF_EFDR);
+}
+
+static void
+w83697hf_write_timeout(int timeout)
+{
+ w83697hf_set_reg(0xF4, timeout); /* Write Timeout counter to CRF4 */
+}
+
+static void
+w83697hf_select_wdt(void)
+{
+ w83697hf_unlock();
+ w83697hf_set_reg(0x07, 0x08); /* Switch to logic device 8 (GPIO2) */
+}
+
+static inline void
+w83697hf_deselect_wdt(void)
+{
+ w83697hf_lock();
+}
+
+static void
+w83697hf_init(void)
+{
+ unsigned char bbuf;
+
+ w83697hf_select_wdt();
+
+ bbuf = w83697hf_get_reg(0x29);
+ bbuf &= ~0x60;
+ bbuf |= 0x20;
+ w83697hf_set_reg(0x29, bbuf); /* Set pin 119 to WDTO# mode (= CR29, WDT0) */
+
+ bbuf = w83697hf_get_reg(0xF3);
+ bbuf &= ~0x04;
+ w83697hf_set_reg(0xF3, bbuf); /* Count mode is seconds */
+
+ w83697hf_deselect_wdt();
+}
+
+static int
+wdt_ping(void)
+{
+ spin_lock(&io_lock);
+ w83697hf_select_wdt();
+
+ w83697hf_write_timeout(timeout);
+
+ w83697hf_deselect_wdt();
+ spin_unlock(&io_lock);
+ return 0;
+}
+
+static int
+wdt_enable(void)
+{
+ spin_lock(&io_lock);
+ w83697hf_select_wdt();
+
+ w83697hf_write_timeout(timeout);
+ w83697hf_set_reg(0x30, 1); /* Enable timer */
+
+ w83697hf_deselect_wdt();
+ spin_unlock(&io_lock);
+ return 0;
+}
+
+static int
+wdt_disable(void)
+{
+ spin_lock(&io_lock);
+ w83697hf_select_wdt();
+
+ w83697hf_set_reg(0x30, 0); /* Disable timer */
+ w83697hf_write_timeout(0);
+
+ w83697hf_deselect_wdt();
+ spin_unlock(&io_lock);
+ return 0;
+}
+
+static int
+wdt_set_heartbeat(int t)
+{
+ if ((t < 1) || (t > 255))
+ return -EINVAL;
+
+ timeout = t;
+ return 0;
+}
+
+static ssize_t
+wdt_write(struct file *file, const char __user *buf, size_t count, loff_t *ppos)
+{
+ if (count) {
+ if (!nowayout) {
+ size_t i;
+
+ expect_close = 0;
+
+ for (i = 0; i != count; i++) {
+ char c;
+ if (get_user(c, buf+i))
+ return -EFAULT;
+ if (c == 'V')
+ expect_close = 42;
+ }
+ }
+ wdt_ping();
+ }
+ return count;
+}
+
+static int
+wdt_ioctl(struct inode *inode, struct file *file, unsigned int cmd,
+ unsigned long arg)
+{
+ void __user *argp = (void __user *)arg;
+ int __user *p = argp;
+ int new_timeout;
+ static struct watchdog_info ident = {
+ .options = WDIOF_KEEPALIVEPING | WDIOF_SETTIMEOUT | WDIOF_MAGICCLOSE,
+ .firmware_version = 1,
+ .identity = "W83697HF WDT",
+ };
+
+ switch (cmd) {
+ case WDIOC_GETSUPPORT:
+ if (copy_to_user(argp, &ident, sizeof(ident)))
+ return -EFAULT;
+ break;
+
+ case WDIOC_GETSTATUS:
+ case WDIOC_GETBOOTSTATUS:
+ return put_user(0, p);
+
+ case WDIOC_KEEPALIVE:
+ wdt_ping();
+ break;
+
+ case WDIOC_SETTIMEOUT:
+ if (get_user(new_timeout, p))
+ return -EFAULT;
+ if (wdt_set_heartbeat(new_timeout))
+ return -EINVAL;
+ wdt_ping();
+ /* Fall */
+
+ case WDIOC_GETTIMEOUT:
+ return put_user(timeout, p);
+
+ case WDIOC_SETOPTIONS:
+ {
+ int options, retval = -EINVAL;
+
+ if (get_user(options, p))
+ return -EFAULT;
+
+ if (options & WDIOS_DISABLECARD) {
+ wdt_disable();
+ retval = 0;
+ }
+
+ if (options & WDIOS_ENABLECARD) {
+ wdt_enable();
+ retval = 0;
+ }
+
+ return retval;
+ }
+
+ default:
+ return -ENOTTY;
+ }
+ return 0;
+}
+
+static int
+wdt_open(struct inode *inode, struct file *file)
+{
+ if (test_and_set_bit(0, &wdt_is_open))
+ return -EBUSY;
+ /*
+ * Activate
+ */
+
+ wdt_enable();
+ return nonseekable_open(inode, file);
+}
+
+static int
+wdt_close(struct inode *inode, struct file *file)
+{
+ if (expect_close == 42) {
+ wdt_disable();
+ } else {
+ printk (KERN_CRIT PFX "Unexpected close, not stopping watchdog!\n");
+ wdt_ping();
+ }
+ expect_close = 0;
+ clear_bit(0, &wdt_is_open);
+ return 0;
+}
+
+/*
+ * Notifier for system down
+ */
+
+static int
+wdt_notify_sys(struct notifier_block *this, unsigned long code,
+ void *unused)
+{
+ if (code == SYS_DOWN || code == SYS_HALT) {
+ /* Turn the WDT off */
+ wdt_disable();
+ }
+ return NOTIFY_DONE;
+}
+
+/*
+ * Kernel Interfaces
+ */
+
+static struct file_operations wdt_fops = {
+ .owner = THIS_MODULE,
+ .llseek = no_llseek,
+ .write = wdt_write,
+ .ioctl = wdt_ioctl,
+ .open = wdt_open,
+ .release = wdt_close,
+};
+
+static struct miscdevice wdt_miscdev = {
+ .minor = WATCHDOG_MINOR,
+ .name = "watchdog",
+ .fops = &wdt_fops,
+};
+
+/*
+ * The WDT needs to learn about soft shutdowns in order to
+ * turn the timebomb registers off.
+ */
+
+static struct notifier_block wdt_notifier = {
+ .notifier_call = wdt_notify_sys,
+};
+
+static int
+w83697hf_check_wdt(void)
+{
+ if (!request_region(wdt_io, 2, WATCHDOG_NAME)) {
+ printk (KERN_ERR PFX "I/O address 0x%x already in use\n", wdt_io);
+ return -EIO;
+ }
+
+ printk (KERN_DEBUG PFX "Looking for watchdog at address 0x%x\n", wdt_io);
+ w83697hf_unlock();
+ if (w83697hf_get_reg(0x20) == 0x60) {
+ printk (KERN_INFO PFX "watchdog found at address 0x%x\n", wdt_io);
+ w83697hf_lock();
+ return 0;
+ }
+ w83697hf_lock(); /* Reprotect in case it was a compatible device */
+
+ printk (KERN_INFO PFX "watchdog not found at address 0x%x\n", wdt_io);
+ release_region(wdt_io, 2);
+ return -EIO;
+}
+
+static int w83697hf_ioports[] = { 0x2e, 0x4e, 0x00 };
+
+static int __init
+wdt_init(void)
+{
+ int ret, i, found = 0;
+
+ spin_lock_init(&io_lock);
+
+ printk (KERN_INFO PFX "WDT driver for W83697HF/HG initializing\n");
+
+ if (wdt_io == 0) {
+ /* we will autodetect the W83697HF/HG watchdog */
+ for (i = 0; ((!found) && (w83697hf_ioports[i] != 0)); i++) {
+ wdt_io = w83697hf_ioports[i];
+ if (!w83697hf_check_wdt())
+ found++;
+ }
+ } else {
+ if (!w83697hf_check_wdt())
+ found++;
+ }
+
+ if (!found) {
+ printk (KERN_ERR PFX "No W83697HF/HG could be found\n");
+ ret = -EIO;
+ goto out;
+ }
+
+ w83697hf_init();
+ wdt_disable(); /* Disable watchdog until first use */
+
+ if (wdt_set_heartbeat(timeout)) {
+ wdt_set_heartbeat(WATCHDOG_TIMEOUT);
+ printk (KERN_INFO PFX "timeout value must be 1<=timeout<=255, using %d\n",
+ WATCHDOG_TIMEOUT);
+ }
+
+ ret = register_reboot_notifier(&wdt_notifier);
+ if (ret != 0) {
+ printk (KERN_ERR PFX "cannot register reboot notifier (err=%d)\n",
+ ret);
+ goto unreg_regions;
+ }
+
+ ret = misc_register(&wdt_miscdev);
+ if (ret != 0) {
+ printk (KERN_ERR PFX "cannot register miscdev on minor=%d (err=%d)\n",
+ WATCHDOG_MINOR, ret);
+ goto unreg_reboot;
+ }
+
+ printk (KERN_INFO PFX "initialized. timeout=%d sec (nowayout=%d)\n",
+ timeout, nowayout);
+
+out:
+ return ret;
+unreg_reboot:
+ unregister_reboot_notifier(&wdt_notifier);
+unreg_regions:
+ release_region(wdt_io, 2);
+ goto out;
+}
+
+static void __exit
+wdt_exit(void)
+{
+ misc_deregister(&wdt_miscdev);
+ unregister_reboot_notifier(&wdt_notifier);
+ release_region(wdt_io, 2);
+}
+
+module_init(wdt_init);
+module_exit(wdt_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Marcus Junker <junker@anduras.de>, Samuel Tardieu <sam@rfc1149.net>");
+MODULE_DESCRIPTION("w83697hf/hg WDT driver");
+MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
generated by cgit v1.2.3-18-g5258 (git 2.32.0) at 2024-11-22 04:28:54 +0000