diff options
| -rw-r--r-- | sound/pci/hda/patch_realtek.c | 129 |
1 files changed, 129 insertions, 0 deletions
diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 4f6dea23d8b..104d2a37f45 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -64,6 +64,7 @@ enum { ALC260_HP, ALC260_HP_3013, ALC260_FUJITSU_S702X, + ALC260_ACER, #ifdef CONFIG_SND_DEBUG ALC260_TEST, #endif @@ -2504,6 +2505,19 @@ static struct hda_input_mux alc260_fujitsu_capture_source = { }, }; +/* Acer TravelMate(/Extensa/Aspire) notebooks have similar configutation to + * the Fujitsu S702x, but jacks are marked differently. We won't allow + * retasking the Headphone jack, so it won't be available here. + */ +static struct hda_input_mux alc260_acer_capture_source = { + .num_items = 3, + .items = { + { "Mic", 0x0 }, + { "Line", 0x2 }, + { "CD", 0x4 }, + }, +}; + /* * This is just place-holder, so there's something for alc_build_pcms to look * at when it calculates the maximum number of channels. ALC260 has no mixer @@ -2521,6 +2535,7 @@ static struct hda_channel_mode alc260_modes[1] = { * HP: base_output + input + capture_alt * HP_3013: hp_3013 + input + capture * fujitsu: fujitsu + capture + * acer: acer + capture */ static struct snd_kcontrol_new alc260_base_output_mixer[] = { @@ -2579,6 +2594,22 @@ static struct snd_kcontrol_new alc260_fujitsu_mixer[] = { { } /* end */ }; +static struct snd_kcontrol_new alc260_acer_mixer[] = { + HDA_CODEC_VOLUME("Master Playback Volume", 0x08, 0x0, HDA_OUTPUT), + HDA_BIND_MUTE("Master Playback Switch", 0x08, 2, HDA_INPUT), + HDA_CODEC_VOLUME("CD Playback Volume", 0x07, 0x04, HDA_INPUT), + HDA_CODEC_MUTE("CD Playback Switch", 0x07, 0x04, HDA_INPUT), + HDA_CODEC_VOLUME("Mic Playback Volume", 0x07, 0x0, HDA_INPUT), + HDA_CODEC_MUTE("Mic Playback Switch", 0x07, 0x0, HDA_INPUT), + ALC_PIN_MODE("Mic Jack Mode", 0x12, ALC_PIN_DIR_IN), + HDA_CODEC_VOLUME("Line Playback Volume", 0x07, 0x02, HDA_INPUT), + HDA_CODEC_MUTE("Line Playback Switch", 0x07, 0x02, HDA_INPUT), + ALC_PIN_MODE("Line Jack Mode", 0x14, ALC_PIN_DIR_INOUT), + HDA_CODEC_VOLUME("Beep Playback Volume", 0x07, 0x05, HDA_INPUT), + HDA_CODEC_MUTE("Beep Playback Switch", 0x07, 0x05, HDA_INPUT), + { } /* end */ +}; + /* capture mixer elements */ static struct snd_kcontrol_new alc260_capture_mixer[] = { HDA_CODEC_VOLUME("Capture Volume", 0x04, 0x0, HDA_INPUT), @@ -2860,6 +2891,90 @@ static struct hda_verb alc260_fujitsu_init_verbs[] = { { } }; +/* Initialisation sequence for ALC260 as configured in Acer TravelMate and + * similar laptops (adapted from Fujitsu init verbs). + */ +static struct hda_verb alc260_acer_init_verbs[] = { + /* On TravelMate laptops, GPIO 0 enables the internal speaker and + * the headphone jack. Turn this on and rely on the standard mute + * methods whenever the user wants to turn these outputs off. + */ + {0x01, AC_VERB_SET_GPIO_MASK, 0x01}, + {0x01, AC_VERB_SET_GPIO_DIRECTION, 0x01}, + {0x01, AC_VERB_SET_GPIO_DATA, 0x01}, + /* Internal speaker/Headphone jack is connected to Line-out pin */ + {0x0f, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP}, + /* Internal microphone/Mic jack is connected to Mic1 pin */ + {0x12, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF50}, + /* Line In jack is connected to Line1 pin */ + {0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN}, + /* Ensure all other unused pins are disabled and muted. */ + {0x10, AC_VERB_SET_PIN_WIDGET_CONTROL, 0}, + {0x10, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, + {0x11, AC_VERB_SET_PIN_WIDGET_CONTROL, 0}, + {0x11, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, + {0x13, AC_VERB_SET_PIN_WIDGET_CONTROL, 0}, + {0x13, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, + {0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, 0}, + {0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, + /* Disable digital (SPDIF) pins */ + {0x03, AC_VERB_SET_DIGI_CONVERT_1, 0}, + {0x06, AC_VERB_SET_DIGI_CONVERT_1, 0}, + + /* Ensure Mic1 and Line1 pin widgets take input from the OUT1 sum + * bus when acting as outputs. + */ + {0x0b, AC_VERB_SET_CONNECT_SEL, 0}, + {0x0d, AC_VERB_SET_CONNECT_SEL, 0}, + + /* Start with output sum widgets muted and their output gains at min */ + {0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, + {0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)}, + {0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO}, + {0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, + {0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)}, + {0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO}, + {0x0a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, + {0x0a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)}, + {0x0a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO}, + + /* Unmute Line-out pin widget amp left and right (no equiv mixer ctrl) */ + {0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE}, + /* Unmute Mic1 and Line1 pin widget input buffers since they start as + * inputs. If the pin mode is changed by the user the pin mode control + * will take care of enabling the pin's input/output buffers as needed. + * Therefore there's no need to enable the input buffer at this + * stage. + */ + {0x12, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)}, + {0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)}, + + /* Mute capture amp left and right */ + {0x04, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, + /* Set ADC connection select to match default mixer setting - mic + * (on mic1 pin) + */ + {0x04, AC_VERB_SET_CONNECT_SEL, 0x00}, + + /* Do similar with the second ADC: mute capture input amp and + * set ADC connection to line (on line1 pin) + */ + {0x05, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, + {0x05, AC_VERB_SET_CONNECT_SEL, 0x02}, + + /* Mute all inputs to mixer widget (even unconnected ones) */ + {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, /* mic1 pin */ + {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)}, /* mic2 pin */ + {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(2)}, /* line1 pin */ + {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(3)}, /* line2 pin */ + {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(4)}, /* CD pin */ + {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(5)}, /* Beep-gen pin */ + {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(6)}, /* Line-out pin */ + {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(7)}, /* HP-pin pin */ + + { } +}; + /* Test configuration for debugging, modelled after the ALC880 test * configuration. */ @@ -3296,6 +3411,8 @@ static struct hda_board_config alc260_cfg_tbl[] = { { .pci_subvendor = 0x103c, .pci_subdevice = 0x3016, .config = ALC260_HP }, { .modelname = "fujitsu", .config = ALC260_FUJITSU_S702X }, { .pci_subvendor = 0x10cf, .pci_subdevice = 0x1326, .config = ALC260_FUJITSU_S702X }, + { .modelname = "acer", .config = ALC260_ACER }, + { .pci_subvendor = 0x1025, .pci_subdevice = 0x008f, .config = ALC260_ACER }, #ifdef CONFIG_SND_DEBUG { .modelname = "test", .config = ALC260_TEST }, #endif @@ -3356,6 +3473,18 @@ static struct alc_config_preset alc260_presets[] = { .channel_mode = alc260_modes, .input_mux = &alc260_fujitsu_capture_source, }, + [ALC260_ACER] = { + .mixers = { alc260_acer_mixer, + alc260_capture_mixer }, + .init_verbs = { alc260_acer_init_verbs }, + .num_dacs = ARRAY_SIZE(alc260_dac_nids), + .dac_nids = alc260_dac_nids, + .num_adc_nids = ARRAY_SIZE(alc260_dual_adc_nids), + .adc_nids = alc260_dual_adc_nids, + .num_channel_mode = ARRAY_SIZE(alc260_modes), + .channel_mode = alc260_modes, + .input_mux = &alc260_acer_capture_source, + }, #ifdef CONFIG_SND_DEBUG [ALC260_TEST] = { .mixers = { alc260_test_mixer, |