diff options
| -rw-r--r-- | drivers/net/8390.c | 2 | ||||
| -rw-r--r-- | drivers/net/skge.c | 22 |
2 files changed, 21 insertions, 3 deletions
diff --git a/drivers/net/8390.c b/drivers/net/8390.c index 6d76f3a99b1..f8702742008 100644 --- a/drivers/net/8390.c +++ b/drivers/net/8390.c @@ -1094,7 +1094,7 @@ static void NS8390_trigger_send(struct net_device *dev, unsigned int length, outb_p(E8390_NODMA+E8390_PAGE0, e8390_base+E8390_CMD); - if (inb_p(e8390_base) & E8390_TRANS) + if (inb_p(e8390_base + E8390_CMD) & E8390_TRANS) { printk(KERN_WARNING "%s: trigger_send() called with the transmitter busy.\n", dev->name); diff --git a/drivers/net/skge.c b/drivers/net/skge.c index ae1996a3bc5..fd398da4993 100644 --- a/drivers/net/skge.c +++ b/drivers/net/skge.c @@ -1643,6 +1643,22 @@ static void yukon_reset(struct skge_hw *hw, int port) | GM_RXCR_UCF_ENA | GM_RXCR_MCF_ENA); } +/* Apparently, early versions of Yukon-Lite had wrong chip_id? */ +static int is_yukon_lite_a0(struct skge_hw *hw) +{ + u32 reg; + int ret; + + if (hw->chip_id != CHIP_ID_YUKON) + return 0; + + reg = skge_read32(hw, B2_FAR); + skge_write8(hw, B2_FAR + 3, 0xff); + ret = (skge_read8(hw, B2_FAR + 3) != 0); + skge_write32(hw, B2_FAR, reg); + return ret; +} + static void yukon_mac_init(struct skge_hw *hw, int port) { struct skge_port *skge = netdev_priv(hw->dev[port]); @@ -1758,9 +1774,11 @@ static void yukon_mac_init(struct skge_hw *hw, int port) /* Configure Rx MAC FIFO */ skge_write16(hw, SK_REG(port, RX_GMF_FL_MSK), RX_FF_FL_DEF_MSK); reg = GMF_OPER_ON | GMF_RX_F_FL_ON; - if (hw->chip_id == CHIP_ID_YUKON_LITE && - hw->chip_rev >= CHIP_REV_YU_LITE_A3) + + /* disable Rx GMAC FIFO Flush for YUKON-Lite Rev. A0 only */ + if (is_yukon_lite_a0(hw)) reg &= ~GMF_RX_F_FL_ON; + skge_write8(hw, SK_REG(port, RX_GMF_CTRL_T), GMF_RST_CLR); skge_write16(hw, SK_REG(port, RX_GMF_CTRL_T), reg); /* |