diff options
-rw-r--r-- | drivers/net/wireless/ath/ar9170/usb.c | 14 | ||||
-rw-r--r-- | drivers/net/wireless/ath/ath9k/xmit.c | 6 | ||||
-rw-r--r-- | drivers/net/wireless/libertas/rx.c | 5 | ||||
-rw-r--r-- | drivers/net/wireless/rt2x00/rt2800usb.c | 2 | ||||
-rw-r--r-- | drivers/ssb/pci.c | 9 | ||||
-rw-r--r-- | drivers/ssb/sprom.c | 1 | ||||
-rw-r--r-- | net/mac80211/chan.c | 2 |
7 files changed, 27 insertions, 12 deletions
diff --git a/drivers/net/wireless/ath/ar9170/usb.c b/drivers/net/wireless/ath/ar9170/usb.c index 82ab532a492..a93dc18a45c 100644 --- a/drivers/net/wireless/ath/ar9170/usb.c +++ b/drivers/net/wireless/ath/ar9170/usb.c @@ -739,17 +739,27 @@ err_out: static void ar9170_usb_firmware_failed(struct ar9170_usb *aru) { struct device *parent = aru->udev->dev.parent; + struct usb_device *udev; + + /* + * Store a copy of the usb_device pointer locally. + * This is because device_release_driver initiates + * ar9170_usb_disconnect, which in turn frees our + * driver context (aru). + */ + udev = aru->udev; complete(&aru->firmware_loading_complete); /* unbind anything failed */ if (parent) device_lock(parent); - device_release_driver(&aru->udev->dev); + + device_release_driver(&udev->dev); if (parent) device_unlock(parent); - usb_put_dev(aru->udev); + usb_put_dev(udev); } static void ar9170_usb_firmware_finish(const struct firmware *fw, void *context) diff --git a/drivers/net/wireless/ath/ath9k/xmit.c b/drivers/net/wireless/ath/ath9k/xmit.c index 3db19172b43..859aa4ab076 100644 --- a/drivers/net/wireless/ath/ath9k/xmit.c +++ b/drivers/net/wireless/ath/ath9k/xmit.c @@ -1198,7 +1198,7 @@ void ath_drain_all_txq(struct ath_softc *sc, bool retry_tx) int r; ath_print(common, ATH_DBG_FATAL, - "Unable to stop TxDMA. Reset HAL!\n"); + "Failed to stop TX DMA. Resetting hardware!\n"); spin_lock_bh(&sc->sc_resetlock); r = ath9k_hw_reset(ah, sc->sc_ah->curchan, false); @@ -1728,6 +1728,8 @@ static int ath_tx_setup_buffer(struct ieee80211_hw *hw, struct ath_buf *bf, } else bf->bf_isnullfunc = false; + bf->bf_tx_aborted = false; + return 0; } @@ -1989,7 +1991,7 @@ static int ath_tx_num_badfrms(struct ath_softc *sc, struct ath_buf *bf, int nbad = 0; int isaggr = 0; - if (bf->bf_tx_aborted) + if (bf->bf_lastbf->bf_tx_aborted) return 0; isaggr = bf_isaggr(bf); diff --git a/drivers/net/wireless/libertas/rx.c b/drivers/net/wireless/libertas/rx.c index a115bfa9513..7a377f5b766 100644 --- a/drivers/net/wireless/libertas/rx.c +++ b/drivers/net/wireless/libertas/rx.c @@ -329,9 +329,8 @@ static int process_rxed_802_11_packet(struct lbs_private *priv, /* create the exported radio header */ /* radiotap header */ - radiotap_hdr.hdr.it_version = 0; - /* XXX must check this value for pad */ - radiotap_hdr.hdr.it_pad = 0; + memset(&radiotap_hdr, 0, sizeof(radiotap_hdr)); + /* XXX must check radiotap_hdr.hdr.it_pad for pad */ radiotap_hdr.hdr.it_len = cpu_to_le16 (sizeof(struct rx_radiotap_hdr)); radiotap_hdr.hdr.it_present = cpu_to_le32 (RX_RADIOTAP_PRESENT); radiotap_hdr.rate = convert_mv_rate_to_radiotap(prxpd->rx_rate); diff --git a/drivers/net/wireless/rt2x00/rt2800usb.c b/drivers/net/wireless/rt2x00/rt2800usb.c index 699161327d6..0f8b84b7224 100644 --- a/drivers/net/wireless/rt2x00/rt2800usb.c +++ b/drivers/net/wireless/rt2x00/rt2800usb.c @@ -413,7 +413,7 @@ static void rt2800usb_write_tx_desc(struct rt2x00_dev *rt2x00dev, */ rt2x00_desc_read(txi, 0, &word); rt2x00_set_field32(&word, TXINFO_W0_USB_DMA_TX_PKT_LEN, - skb->len - TXINFO_DESC_SIZE); + skb->len + TXWI_DESC_SIZE); rt2x00_set_field32(&word, TXINFO_W0_WIV, !test_bit(ENTRY_TXD_ENCRYPT_IV, &txdesc->flags)); rt2x00_set_field32(&word, TXINFO_W0_QSEL, 2); diff --git a/drivers/ssb/pci.c b/drivers/ssb/pci.c index 989e2752cc3..6dcda86be6e 100644 --- a/drivers/ssb/pci.c +++ b/drivers/ssb/pci.c @@ -625,9 +625,12 @@ static int ssb_pci_sprom_get(struct ssb_bus *bus, ssb_printk(KERN_ERR PFX "No SPROM available!\n"); return -ENODEV; } - - bus->sprom_offset = (bus->chipco.dev->id.revision < 31) ? - SSB_SPROM_BASE1 : SSB_SPROM_BASE31; + if (bus->chipco.dev) { /* can be unavailible! */ + bus->sprom_offset = (bus->chipco.dev->id.revision < 31) ? + SSB_SPROM_BASE1 : SSB_SPROM_BASE31; + } else { + bus->sprom_offset = SSB_SPROM_BASE1; + } buf = kcalloc(SSB_SPROMSIZE_WORDS_R123, sizeof(u16), GFP_KERNEL); if (!buf) diff --git a/drivers/ssb/sprom.c b/drivers/ssb/sprom.c index 007bc3a0348..4f7cc8d1327 100644 --- a/drivers/ssb/sprom.c +++ b/drivers/ssb/sprom.c @@ -185,6 +185,7 @@ bool ssb_is_sprom_available(struct ssb_bus *bus) /* this routine differs from specs as we do not access SPROM directly on PCMCIA */ if (bus->bustype == SSB_BUSTYPE_PCI && + bus->chipco.dev && /* can be unavailible! */ bus->chipco.dev->id.revision >= 31) return bus->chipco.capabilities & SSB_CHIPCO_CAP_SPROM; diff --git a/net/mac80211/chan.c b/net/mac80211/chan.c index 5d218c530a4..32be11e4c4d 100644 --- a/net/mac80211/chan.c +++ b/net/mac80211/chan.c @@ -5,7 +5,7 @@ #include <linux/nl80211.h> #include "ieee80211_i.h" -enum ieee80211_chan_mode +static enum ieee80211_chan_mode __ieee80211_get_channel_mode(struct ieee80211_local *local, struct ieee80211_sub_if_data *ignore) { |