aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
Diffstat
-rw-r--r--arch/powerpc/boot/dts/a3m071.dts6
-rw-r--r--arch/powerpc/boot/dts/a4m072.dts27
-rw-r--r--arch/powerpc/boot/dts/cm5200.dts6
-rw-r--r--arch/powerpc/boot/dts/digsy_mtc.dts14
-rw-r--r--arch/powerpc/boot/dts/lite5200b.dts23
-rw-r--r--arch/powerpc/boot/dts/media5200.dts6
-rw-r--r--arch/powerpc/boot/dts/motionpro.dts26
-rw-r--r--arch/powerpc/boot/dts/mpc5121.dtsi410
-rw-r--r--arch/powerpc/boot/dts/mpc5121ads.dts319
-rw-r--r--arch/powerpc/boot/dts/mpc5200b.dtsi25
-rw-r--r--arch/powerpc/boot/dts/mucmc52.dts48
-rw-r--r--arch/powerpc/boot/dts/o2d.dtsi27
-rw-r--r--arch/powerpc/boot/dts/pcm030.dts48
-rw-r--r--arch/powerpc/boot/dts/pcm032.dts45
-rw-r--r--arch/powerpc/boot/dts/pdm360ng.dts273
-rw-r--r--arch/powerpc/boot/dts/uc101.dts52
-rw-r--r--arch/powerpc/include/asm/mpc5121.h17
-rw-r--r--arch/powerpc/platforms/512x/clock.c34
-rw-r--r--arch/powerpc/platforms/512x/mpc512x_shared.c32
-rw-r--r--arch/powerpc/platforms/52xx/mpc52xx_lpbfifo.c6
-rw-r--r--arch/powerpc/platforms/Kconfig2
-rw-r--r--arch/powerpc/sysdev/Makefile1
-rw-r--r--arch/powerpc/sysdev/mpc5xxx_clocks.c4
-rw-r--r--drivers/Makefile2
-rw-r--r--drivers/ata/pata_mpc52xx.c6
-rw-r--r--drivers/dma/Kconfig2
-rw-r--r--drivers/dma/Makefile1
-rw-r--r--drivers/dma/bestcomm/Kconfig (renamed from arch/powerpc/sysdev/bestcomm/Kconfig)0
-rw-r--r--drivers/dma/bestcomm/Makefile (renamed from arch/powerpc/sysdev/bestcomm/Makefile)0
-rw-r--r--drivers/dma/bestcomm/ata.c (renamed from arch/powerpc/sysdev/bestcomm/ata.c)6
-rw-r--r--drivers/dma/bestcomm/bcom_ata_task.c (renamed from arch/powerpc/sysdev/bestcomm/bcom_ata_task.c)0
-rw-r--r--drivers/dma/bestcomm/bcom_fec_rx_task.c (renamed from arch/powerpc/sysdev/bestcomm/bcom_fec_rx_task.c)0
-rw-r--r--drivers/dma/bestcomm/bcom_fec_tx_task.c (renamed from arch/powerpc/sysdev/bestcomm/bcom_fec_tx_task.c)0
-rw-r--r--drivers/dma/bestcomm/bcom_gen_bd_rx_task.c (renamed from arch/powerpc/sysdev/bestcomm/bcom_gen_bd_rx_task.c)0
-rw-r--r--drivers/dma/bestcomm/bcom_gen_bd_tx_task.c (renamed from arch/powerpc/sysdev/bestcomm/bcom_gen_bd_tx_task.c)0
-rw-r--r--drivers/dma/bestcomm/bestcomm.c (renamed from arch/powerpc/sysdev/bestcomm/bestcomm.c)6
-rw-r--r--drivers/dma/bestcomm/fec.c (renamed from arch/powerpc/sysdev/bestcomm/fec.c)6
-rw-r--r--drivers/dma/bestcomm/gen_bd.c (renamed from arch/powerpc/sysdev/bestcomm/gen_bd.c)6
-rw-r--r--drivers/dma/bestcomm/sram.c (renamed from arch/powerpc/sysdev/bestcomm/sram.c)2
-rw-r--r--drivers/net/ethernet/freescale/fec_mpc52xx.c4
-rw-r--r--drivers/video/fsl-diu-fb.c64
-rw-r--r--include/linux/fsl/bestcomm/ata.h (renamed from arch/powerpc/sysdev/bestcomm/ata.h)0
-rw-r--r--include/linux/fsl/bestcomm/bestcomm.h (renamed from arch/powerpc/sysdev/bestcomm/bestcomm.h)0
-rw-r--r--include/linux/fsl/bestcomm/bestcomm_priv.h (renamed from arch/powerpc/sysdev/bestcomm/bestcomm_priv.h)0
-rw-r--r--include/linux/fsl/bestcomm/fec.h (renamed from arch/powerpc/sysdev/bestcomm/fec.h)0
-rw-r--r--include/linux/fsl/bestcomm/gen_bd.h (renamed from arch/powerpc/sysdev/bestcomm/gen_bd.h)0
-rw-r--r--include/linux/fsl/bestcomm/sram.h (renamed from arch/powerpc/sysdev/bestcomm/sram.h)0
-rw-r--r--sound/soc/fsl/mpc5200_dma.c4
48 files changed, 716 insertions, 844 deletions
diff --git a/arch/powerpc/boot/dts/a3m071.dts b/arch/powerpc/boot/dts/a3m071.dts
index 877a28cb77e..bf81b8f9704 100644
--- a/arch/powerpc/boot/dts/a3m071.dts
+++ b/arch/powerpc/boot/dts/a3m071.dts
@@ -17,6 +17,8 @@
/include/ "mpc5200b.dtsi"
+&gpt0 { fsl,has-wdt; };
+
/ {
model = "anonymous,a3m071";
compatible = "anonymous,a3m071";
@@ -30,10 +32,6 @@
bus-frequency = <0>; /* From boot loader */
system-frequency = <0>; /* From boot loader */
- timer@600 {
- fsl,has-wdt;
- };
-
spi@f00 {
status = "disabled";
};
diff --git a/arch/powerpc/boot/dts/a4m072.dts b/arch/powerpc/boot/dts/a4m072.dts
index fabe7b7d5f1..1f02034c7e9 100644
--- a/arch/powerpc/boot/dts/a4m072.dts
+++ b/arch/powerpc/boot/dts/a4m072.dts
@@ -15,6 +15,11 @@
/include/ "mpc5200b.dtsi"
+&gpt0 { fsl,has-wdt; };
+&gpt3 { gpio-controller; };
+&gpt4 { gpio-controller; };
+&gpt5 { gpio-controller; };
+
/ {
model = "anonymous,a4m072";
compatible = "anonymous,a4m072";
@@ -34,28 +39,6 @@
fsl,init-fd-counters = <0x3333>;
};
- timer@600 {
- fsl,has-wdt;
- };
-
- gpt3: timer@630 { /* General Purpose Timer in GPIO mode */
- compatible = "fsl,mpc5200b-gpt-gpio","fsl,mpc5200-gpt-gpio";
- gpio-controller;
- #gpio-cells = <2>;
- };
-
- gpt4: timer@640 { /* General Purpose Timer in GPIO mode */
- compatible = "fsl,mpc5200b-gpt-gpio","fsl,mpc5200-gpt-gpio";
- gpio-controller;
- #gpio-cells = <2>;
- };
-
- gpt5: timer@650 { /* General Purpose Timer in GPIO mode */
- compatible = "fsl,mpc5200b-gpt-gpio","fsl,mpc5200-gpt-gpio";
- gpio-controller;
- #gpio-cells = <2>;
- };
-
spi@f00 {
status = "disabled";
};
diff --git a/arch/powerpc/boot/dts/cm5200.dts b/arch/powerpc/boot/dts/cm5200.dts
index ad3a4f4a2b0..fb580dd84dd 100644
--- a/arch/powerpc/boot/dts/cm5200.dts
+++ b/arch/powerpc/boot/dts/cm5200.dts
@@ -12,15 +12,13 @@
/include/ "mpc5200b.dtsi"
+&gpt0 { fsl,has-wdt; };
+
/ {
model = "schindler,cm5200";
compatible = "schindler,cm5200";
soc5200@f0000000 {
- timer@600 { // General Purpose Timer
- fsl,has-wdt;
- };
-
can@900 {
status = "disabled";
};
diff --git a/arch/powerpc/boot/dts/digsy_mtc.dts b/arch/powerpc/boot/dts/digsy_mtc.dts
index a7511f2d844..955bff629df 100644
--- a/arch/powerpc/boot/dts/digsy_mtc.dts
+++ b/arch/powerpc/boot/dts/digsy_mtc.dts
@@ -13,6 +13,9 @@
/include/ "mpc5200b.dtsi"
+&gpt0 { gpio-controller; fsl,has-wdt; };
+&gpt1 { gpio-controller; };
+
/ {
model = "intercontrol,digsy-mtc";
compatible = "intercontrol,digsy-mtc";
@@ -22,17 +25,6 @@
};
soc5200@f0000000 {
- timer@600 { // General Purpose Timer
- #gpio-cells = <2>;
- fsl,has-wdt;
- gpio-controller;
- };
-
- timer@610 {
- #gpio-cells = <2>;
- gpio-controller;
- };
-
rtc@800 {
status = "disabled";
};
diff --git a/arch/powerpc/boot/dts/lite5200b.dts b/arch/powerpc/boot/dts/lite5200b.dts
index fb288bb882b..5abb46c5cc9 100644
--- a/arch/powerpc/boot/dts/lite5200b.dts
+++ b/arch/powerpc/boot/dts/lite5200b.dts
@@ -12,19 +12,34 @@
/include/ "mpc5200b.dtsi"
+&gpt0 { fsl,has-wdt; };
+&gpt2 { gpio-controller; };
+&gpt3 { gpio-controller; };
+
/ {
model = "fsl,lite5200b";
compatible = "fsl,lite5200b";
+ leds {
+ compatible = "gpio-leds";
+ tmr2 {
+ gpios = <&gpt2 0 1>;
+ };
+ tmr3 {
+ gpios = <&gpt3 0 1>;
+ linux,default-trigger = "heartbeat";
+ };
+ led1 { gpios = <&gpio_wkup 2 1>; };
+ led2 { gpios = <&gpio_simple 3 1>; };
+ led3 { gpios = <&gpio_wkup 3 1>; };
+ led4 { gpios = <&gpio_simple 2 1>; };
+ };
+
memory {
reg = <0x00000000 0x10000000>; // 256MB
};
soc5200@f0000000 {
- timer@600 { // General Purpose Timer
- fsl,has-wdt;
- };
-
psc@2000 { // PSC1
compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
cell-index = <0>;
diff --git a/arch/powerpc/boot/dts/media5200.dts b/arch/powerpc/boot/dts/media5200.dts
index 48d72f38e5e..b5413cb85f1 100644
--- a/arch/powerpc/boot/dts/media5200.dts
+++ b/arch/powerpc/boot/dts/media5200.dts
@@ -13,6 +13,8 @@
/include/ "mpc5200b.dtsi"
+&gpt0 { fsl,has-wdt; };
+
/ {
model = "fsl,media5200";
compatible = "fsl,media5200";
@@ -41,10 +43,6 @@
soc5200@f0000000 {
bus-frequency = <132000000>;// 132 MHz
- timer@600 { // General Purpose Timer
- fsl,has-wdt;
- };
-
psc@2000 { // PSC1
status = "disabled";
};
diff --git a/arch/powerpc/boot/dts/motionpro.dts b/arch/powerpc/boot/dts/motionpro.dts
index 0b78e89ac69..bbabd97492a 100644
--- a/arch/powerpc/boot/dts/motionpro.dts
+++ b/arch/powerpc/boot/dts/motionpro.dts
@@ -12,26 +12,22 @@
/include/ "mpc5200b.dtsi"
+&gpt0 { fsl,has-wdt; };
+&gpt6 { // Motion-PRO status LED
+ compatible = "promess,motionpro-led";
+ label = "motionpro-statusled";
+ blink-delay = <100>; // 100 msec
+};
+&gpt7 { // Motion-PRO ready LED
+ compatible = "promess,motionpro-led";
+ label = "motionpro-readyled";
+};
+
/ {
model = "promess,motionpro";
compatible = "promess,motionpro";
soc5200@f0000000 {
- timer@600 { // General Purpose Timer
- fsl,has-wdt;
- };
-
- timer@660 { // Motion-PRO status LED
- compatible = "promess,motionpro-led";
- label = "motionpro-statusled";
- blink-delay = <100>; // 100 msec
- };
-
- timer@670 { // Motion-PRO ready LED
- compatible = "promess,motionpro-led";
- label = "motionpro-readyled";
- };
-
can@900 {
status = "disabled";
};
diff --git a/arch/powerpc/boot/dts/mpc5121.dtsi b/arch/powerpc/boot/dts/mpc5121.dtsi
new file mode 100644
index 00000000000..723e292b6b4
--- /dev/null
+++ b/arch/powerpc/boot/dts/mpc5121.dtsi
@@ -0,0 +1,410 @@
+/*
+ * base MPC5121 Device Tree Source
+ *
+ * Copyright 2007-2008 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+/dts-v1/;
+
+/ {
+ model = "mpc5121";
+ compatible = "fsl,mpc5121";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ interrupt-parent = <&ipic>;
+
+ aliases {
+ ethernet0 = &eth0;
+ pci = &pci;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ PowerPC,5121@0 {
+ device_type = "cpu";
+ reg = <0>;
+ d-cache-line-size = <0x20>; /* 32 bytes */
+ i-cache-line-size = <0x20>; /* 32 bytes */
+ d-cache-size = <0x8000>; /* L1, 32K */
+ i-cache-size = <0x8000>; /* L1, 32K */
+ timebase-frequency = <49500000>;/* 49.5 MHz (csb/4) */
+ bus-frequency = <198000000>; /* 198 MHz csb bus */
+ clock-frequency = <396000000>; /* 396 MHz ppc core */
+ };
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x00000000 0x10000000>; /* 256MB at 0 */
+ };
+
+ mbx@20000000 {
+ compatible = "fsl,mpc5121-mbx";
+ reg = <0x20000000 0x4000>;
+ interrupts = <66 0x8>;
+ };
+
+ sram@30000000 {
+ compatible = "fsl,mpc5121-sram";
+ reg = <0x30000000 0x20000>; /* 128K at 0x30000000 */
+ };
+
+ nfc@40000000 {
+ compatible = "fsl,mpc5121-nfc";
+ reg = <0x40000000 0x100000>; /* 1M at 0x40000000 */
+ interrupts = <6 8>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ };
+
+ localbus@80000020 {
+ compatible = "fsl,mpc5121-localbus";
+ #address-cells = <2>;
+ #size-cells = <1>;
+ reg = <0x80000020 0x40>;
+ interrupts = <7 0x8>;
+ ranges = <0x0 0x0 0xfc000000 0x04000000>;
+ };
+
+ soc@80000000 {
+ compatible = "fsl,mpc5121-immr";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ #interrupt-cells = <2>;
+ ranges = <0x0 0x80000000 0x400000>;
+ reg = <0x80000000 0x400000>;
+ bus-frequency = <66000000>; /* 66 MHz ips bus */
+
+
+ /*
+ * IPIC
+ * interrupts cell = <intr #, sense>
+ * sense values match linux IORESOURCE_IRQ_* defines:
+ * sense == 8: Level, low assertion
+ * sense == 2: Edge, high-to-low change
+ */
+ ipic: interrupt-controller@c00 {
+ compatible = "fsl,mpc5121-ipic", "fsl,ipic";
+ interrupt-controller;
+ #address-cells = <0>;
+ #interrupt-cells = <2>;
+ reg = <0xc00 0x100>;
+ };
+
+ /* Watchdog timer */
+ wdt@900 {
+ compatible = "fsl,mpc5121-wdt";
+ reg = <0x900 0x100>;
+ };
+
+ /* Real time clock */
+ rtc@a00 {
+ compatible = "fsl,mpc5121-rtc";
+ reg = <0xa00 0x100>;
+ interrupts = <79 0x8 80 0x8>;
+ };
+
+ /* Reset module */
+ reset@e00 {
+ compatible = "fsl,mpc5121-reset";
+ reg = <0xe00 0x100>;
+ };
+
+ /* Clock control */
+ clock@f00 {
+ compatible = "fsl,mpc5121-clock";
+ reg = <0xf00 0x100>;
+ };
+
+ /* Power Management Controller */
+ pmc@1000{
+ compatible = "fsl,mpc5121-pmc";
+ reg = <0x1000 0x100>;
+ interrupts = <83 0x8>;
+ };
+
+ gpio@1100 {
+ compatible = "fsl,mpc5121-gpio";
+ reg = <0x1100 0x100>;
+ interrupts = <78 0x8>;
+ };
+
+ can@1300 {
+ compatible = "fsl,mpc5121-mscan";
+ reg = <0x1300 0x80>;
+ interrupts = <12 0x8>;
+ };
+
+ can@1380 {
+ compatible = "fsl,mpc5121-mscan";
+ reg = <0x1380 0x80>;
+ interrupts = <13 0x8>;
+ };
+
+ sdhc@1500 {
+ compatible = "fsl,mpc5121-sdhc";
+ reg = <0x1500 0x100>;
+ interrupts = <8 0x8>;
+ };
+
+ i2c@1700 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,mpc5121-i2c", "fsl-i2c";
+ reg = <0x1700 0x20>;
+ interrupts = <9 0x8>;
+ };
+
+ i2c@1720 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,mpc5121-i2c", "fsl-i2c";
+ reg = <0x1720 0x20>;
+ interrupts = <10 0x8>;
+ };
+
+ i2c@1740 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,mpc5121-i2c", "fsl-i2c";
+ reg = <0x1740 0x20>;
+ interrupts = <11 0x8>;
+ };
+
+ i2ccontrol@1760 {
+ compatible = "fsl,mpc5121-i2c-ctrl";
+ reg = <0x1760 0x8>;
+ };
+
+ axe@2000 {
+ compatible = "fsl,mpc5121-axe";
+ reg = <0x2000 0x100>;
+ interrupts = <42 0x8>;
+ };
+
+ display@2100 {
+ compatible = "fsl,mpc5121-diu";
+ reg = <0x2100 0x100>;
+ interrupts = <64 0x8>;
+ };
+
+ can@2300 {
+ compatible = "fsl,mpc5121-mscan";
+ reg = <0x2300 0x80>;
+ interrupts = <90 0x8>;
+ };
+
+ can@2380 {
+ compatible = "fsl,mpc5121-mscan";
+ reg = <0x2380 0x80>;
+ interrupts = <91 0x8>;
+ };
+
+ viu@2400 {
+ compatible = "fsl,mpc5121-viu";
+ reg = <0x2400 0x400>;
+ interrupts = <67 0x8>;
+ };
+
+ mdio@2800 {
+ compatible = "fsl,mpc5121-fec-mdio";
+ reg = <0x2800 0x800>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ eth0: ethernet@2800 {
+ device_type = "network";
+ compatible = "fsl,mpc5121-fec";
+ reg = <0x2800 0x800>;
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ interrupts = <4 0x8>;
+ };
+
+ /* USB1 using external ULPI PHY */
+ usb@3000 {
+ compatible = "fsl,mpc5121-usb2-dr";
+ reg = <0x3000 0x600>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <43 0x8>;
+ dr_mode = "otg";
+ phy_type = "ulpi";
+ };
+
+ /* USB0 using internal UTMI PHY */
+ usb@4000 {
+ compatible = "fsl,mpc5121-usb2-dr";
+ reg = <0x4000 0x600>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <44 0x8>;
+ dr_mode = "otg";
+ phy_type = "utmi_wide";
+ };
+
+ /* IO control */
+ ioctl@a000 {
+ compatible = "fsl,mpc5121-ioctl";
+ reg = <0xA000 0x1000>;
+ };
+
+ /* LocalPlus controller */
+ lpc@10000 {
+ compatible = "fsl,mpc5121-lpc";
+ reg = <0x10000 0x200>;
+ };
+
+ pata@10200 {
+ compatible = "fsl,mpc5121-pata";
+ reg = <0x10200 0x100>;
+ interrupts = <5 0x8>;
+ };
+
+ /* 512x PSCs are not 52xx PSC compatible */
+
+ /* PSC0 */
+ psc@11000 {
+ compatible = "fsl,mpc5121-psc";
+ reg = <0x11000 0x100>;
+ interrupts = <40 0x8>;
+ fsl,rx-fifo-size = <16>;
+ fsl,tx-fifo-size = <16>;
+ };
+
+ /* PSC1 */
+ psc@11100 {
+ compatible = "fsl,mpc5121-psc";
+ reg = <0x11100 0x100>;
+ interrupts = <40 0x8>;
+ fsl,rx-fifo-size = <16>;
+ fsl,tx-fifo-size = <16>;
+ };
+
+ /* PSC2 */
+ psc@11200 {
+ compatible = "fsl,mpc5121-psc";
+ reg = <0x11200 0x100>;
+ interrupts = <40 0x8>;
+ fsl,rx-fifo-size = <16>;
+ fsl,tx-fifo-size = <16>;
+ };
+
+ /* PSC3 */
+ psc@11300 {
+ compatible = "fsl,mpc5121-psc-uart", "fsl,mpc5121-psc";
+ reg = <0x11300 0x100>;
+ interrupts = <40 0x8>;
+ fsl,rx-fifo-size = <16>;
+ fsl,tx-fifo-size = <16>;
+ };
+
+ /* PSC4 */
+ psc@11400 {
+ compatible = "fsl,mpc5121-psc-uart", "fsl,mpc5121-psc";
+ reg = <0x11400 0x100>;
+ interrupts = <40 0x8>;
+ fsl,rx-fifo-size = <16>;
+ fsl,tx-fifo-size = <16>;
+ };
+
+ /* PSC5 */
+ psc@11500 {
+ compatible = "fsl,mpc5121-psc";
+ reg = <0x11500 0x100>;
+ interrupts = <40 0x8>;
+ fsl,rx-fifo-size = <16>;
+ fsl,tx-fifo-size = <16>;
+ };
+
+ /* PSC6 */
+ psc@11600 {
+ compatible = "fsl,mpc5121-psc";
+ reg = <0x11600 0x100>;
+ interrupts = <40 0x8>;
+ fsl,rx-fifo-size = <16>;
+ fsl,tx-fifo-size = <16>;
+ };
+
+ /* PSC7 */
+ psc@11700 {
+ compatible = "fsl,mpc5121-psc";
+ reg = <0x11700 0x100>;
+ interrupts = <40 0x8>;
+ fsl,rx-fifo-size = <16>;
+ fsl,tx-fifo-size = <16>;
+ };
+
+ /* PSC8 */
+ psc@11800 {
+ compatible = "fsl,mpc5121-psc";
+ reg = <0x11800 0x100>;
+ interrupts = <40 0x8>;
+ fsl,rx-fifo-size = <16>;
+ fsl,tx-fifo-size = <16>;
+ };
+
+ /* PSC9 */
+ psc@11900 {
+ compatible = "fsl,mpc5121-psc";
+ reg = <0x11900 0x100>;
+ interrupts = <40 0x8>;
+ fsl,rx-fifo-size = <16>;
+ fsl,tx-fifo-size = <16>;
+ };
+
+ /* PSC10 */
+ psc@11a00 {
+ compatible = "fsl,mpc5121-psc";
+ reg = <0x11a00 0x100>;
+ interrupts = <40 0x8>;
+ fsl,rx-fifo-size = <16>;
+ fsl,tx-fifo-size = <16>;
+ };
+
+ /* PSC11 */
+ psc@11b00 {
+ compatible = "fsl,mpc5121-psc";
+ reg = <0x11b00 0x100>;
+ interrupts = <40 0x8>;
+ fsl,rx-fifo-size = <16>;
+ fsl,tx-fifo-size = <16>;
+ };
+
+ pscfifo@11f00 {
+ compatible = "fsl,mpc5121-psc-fifo";
+ reg = <0x11f00 0x100>;
+ interrupts = <40 0x8>;
+ };
+
+ dma@14000 {
+ compatible = "fsl,mpc5121-dma";
+ reg = <0x14000 0x1800>;
+ interrupts = <65 0x8>;
+ };
+ };
+
+ pci: pci@80008500 {
+ compatible = "fsl,mpc5121-pci";
+ device_type = "pci";
+ interrupts = <1 0x8>;
+ clock-frequency = <0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+
+ reg = <0x80008500 0x100 /* internal registers */
+ 0x80008300 0x8>; /* config space access registers */
+ bus-range = <0x0 0x0>;
+ ranges = <0x42000000 0x0 0xa0000000 0xa0000000 0x0 0x10000000
+ 0x02000000 0x0 0xb0000000 0xb0000000 0x0 0x10000000
+ 0x01000000 0x0 0x00000000 0x84000000 0x0 0x01000000>;
+ };
+};
diff --git a/arch/powerpc/boot/dts/mpc5121ads.dts b/arch/powerpc/boot/dts/mpc5121ads.dts
index c9ef6bbe26c..f269b1382ef 100644
--- a/arch/powerpc/boot/dts/mpc5121ads.dts
+++ b/arch/powerpc/boot/dts/mpc5121ads.dts
@@ -1,7 +1,7 @@
/*
* MPC5121E ADS Device Tree Source
*
- * Copyright 2007,2008 Freescale Semiconductor Inc.
+ * Copyright 2007-2008 Freescale Semiconductor Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
@@ -9,74 +9,26 @@
* option) any later version.
*/
-/dts-v1/;
+/include/ "mpc5121.dtsi"
/ {
model = "mpc5121ads";
compatible = "fsl,mpc5121ads";
- #address-cells = <1>;
- #size-cells = <1>;
-
- aliases {
- pci = &pci;
- };
-
- cpus {
- #address-cells = <1>;
- #size-cells = <0>;
-
- PowerPC,5121@0 {
- device_type = "cpu";
- reg = <0>;
- d-cache-line-size = <0x20>; // 32 bytes
- i-cache-line-size = <0x20>; // 32 bytes
- d-cache-size = <0x8000>; // L1, 32K
- i-cache-size = <0x8000>; // L1, 32K
- timebase-frequency = <49500000>;// 49.5 MHz (csb/4)
- bus-frequency = <198000000>; // 198 MHz csb bus
- clock-frequency = <396000000>; // 396 MHz ppc core
- };
- };
-
- memory {
- device_type = "memory";
- reg = <0x00000000 0x10000000>; // 256MB at 0
- };
-
- mbx@20000000 {
- compatible = "fsl,mpc5121-mbx";
- reg = <0x20000000 0x4000>;
- interrupts = <66 0x8>;
- interrupt-parent = < &ipic >;
- };
-
- sram@30000000 {
- compatible = "fsl,mpc5121-sram";
- reg = <0x30000000 0x20000>; // 128K at 0x30000000
- };
nfc@40000000 {
- compatible = "fsl,mpc5121-nfc";
- reg = <0x40000000 0x100000>; // 1M at 0x40000000
- interrupts = <6 8>;
- interrupt-parent = < &ipic >;
- #address-cells = <1>;
- #size-cells = <1>;
- // ADS has two Hynix 512MB Nand flash chips in a single
- // stacked package.
+ /*
+ * ADS has two Hynix 512MB Nand flash chips in a single
+ * stacked package.
+ */
chips = <2>;
+
nand@0 {
label = "nand";
- reg = <0x00000000 0x40000000>; // 512MB + 512MB
+ reg = <0x00000000 0x40000000>; /* 512MB + 512MB */
};
};
localbus@80000020 {
- compatible = "fsl,mpc5121-localbus";
- #address-cells = <2>;
- #size-cells = <1>;
- reg = <0x80000020 0x40>;
-
ranges = <0x0 0x0 0xfc000000 0x04000000
0x2 0x0 0x82000000 0x00008000>;
@@ -87,6 +39,7 @@
#size-cells = <1>;
bank-width = <4>;
device-width = <2>;
+
protected@0 {
label = "protected";
reg = <0x00000000 0x00040000>; // first sector is protected
@@ -121,91 +74,18 @@
interrupt-controller;
#interrupt-cells = <2>;
reg = <0x2 0xa 0x5>;
- interrupt-parent = < &ipic >;
- // irq routing
- // all irqs but touch screen are routed to irq0 (ipic 48)
- // touch screen is statically routed to irq1 (ipic 17)
- // so don't use it here
+ /* irq routing:
+ * all irqs but touch screen are routed to irq0 (ipic 48)
+ * touch screen is statically routed to irq1 (ipic 17)
+ * so don't use it here
+ */
interrupts = <48 0x8>;
};
};
soc@80000000 {
- compatible = "fsl,mpc5121-immr";
- #address-cells = <1>;
- #size-cells = <1>;
- #interrupt-cells = <2>;
- ranges = <0x0 0x80000000 0x400000>;
- reg = <0x80000000 0x400000>;
- bus-frequency = <66000000>; // 66 MHz ips bus
-
-
- // IPIC
- // interrupts cell = <intr #, sense>
- // sense values match linux IORESOURCE_IRQ_* defines:
- // sense == 8: Level, low assertion
- // sense == 2: Edge, high-to-low change
- //
- ipic: interrupt-controller@c00 {
- compatible = "fsl,mpc5121-ipic", "fsl,ipic";
- interrupt-controller;
- #address-cells = <0>;
- #interrupt-cells = <2>;
- reg = <0xc00 0x100>;
- };
-
- rtc@a00 { // Real time clock
- compatible = "fsl,mpc5121-rtc";
- reg = <0xa00 0x100>;
- interrupts = <79 0x8 80 0x8>;
- interrupt-parent = < &ipic >;
- };
-
- reset@e00 { // Reset module<