aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
Diffstat
-rw-r--r--arch/m68k/include/asm/entry_no.h12
-rw-r--r--arch/m68k/include/asm/system.h194
-rw-r--r--arch/m68k/include/asm/system_mm.h193
-rw-r--r--arch/m68k/include/asm/system_no.h153
-rw-r--r--arch/m68k/platform/68328/entry.S13
-rw-r--r--arch/m68k/platform/68360/entry.S13
-rw-r--r--arch/m68k/platform/coldfire/entry.S24
7 files changed, 222 insertions, 380 deletions
diff --git a/arch/m68k/include/asm/entry_no.h b/arch/m68k/include/asm/entry_no.h
index 627d69bacc5..68611e3dbb1 100644
--- a/arch/m68k/include/asm/entry_no.h
+++ b/arch/m68k/include/asm/entry_no.h
@@ -96,11 +96,11 @@
.endm
.macro RDUSP
- movel sw_usp,%a2
+ movel sw_usp,%a3
.endm
.macro WRUSP
- movel %a0,sw_usp
+ movel %a3,sw_usp
.endm
#else /* !CONFIG_COLDFIRE_SW_A7 */
@@ -127,13 +127,13 @@
.endm
.macro RDUSP
- /*move %usp,%a2*/
- .word 0x4e6a
+ /*move %usp,%a3*/
+ .word 0x4e6b
.endm
.macro WRUSP
- /*move %a0,%usp*/
- .word 0x4e60
+ /*move %a3,%usp*/
+ .word 0x4e63
.endm
#endif /* !CONFIG_COLDFIRE_SW_A7 */
diff --git a/arch/m68k/include/asm/system.h b/arch/m68k/include/asm/system.h
index ccea925ff4f..47b01f4726b 100644
--- a/arch/m68k/include/asm/system.h
+++ b/arch/m68k/include/asm/system.h
@@ -1,5 +1,193 @@
-#ifdef __uClinux__
-#include "system_no.h"
+#ifndef _M68K_SYSTEM_H
+#define _M68K_SYSTEM_H
+
+#include <linux/linkage.h>
+#include <linux/kernel.h>
+#include <linux/irqflags.h>
+#include <asm/segment.h>
+#include <asm/entry.h>
+
+#ifdef __KERNEL__
+
+/*
+ * switch_to(n) should switch tasks to task ptr, first checking that
+ * ptr isn't the current task, in which case it does nothing. This
+ * also clears the TS-flag if the task we switched to has used the
+ * math co-processor latest.
+ */
+/*
+ * switch_to() saves the extra registers, that are not saved
+ * automatically by SAVE_SWITCH_STACK in resume(), ie. d0-d5 and
+ * a0-a1. Some of these are used by schedule() and its predecessors
+ * and so we might get see unexpected behaviors when a task returns
+ * with unexpected register values.
+ *
+ * syscall stores these registers itself and none of them are used
+ * by syscall after the function in the syscall has been called.
+ *
+ * Beware that resume now expects *next to be in d1 and the offset of
+ * tss to be in a1. This saves a few instructions as we no longer have
+ * to push them onto the stack and read them back right after.
+ *
+ * 02/17/96 - Jes Sorensen (jds@kom.auc.dk)
+ *
+ * Changed 96/09/19 by Andreas Schwab
+ * pass prev in a0, next in a1
+ */
+asmlinkage void resume(void);
+#define switch_to(prev,next,last) do { \
+ register void *_prev __asm__ ("a0") = (prev); \
+ register void *_next __asm__ ("a1") = (next); \
+ register void *_last __asm__ ("d1"); \
+ __asm__ __volatile__("jbsr resume" \
+ : "=a" (_prev), "=a" (_next), "=d" (_last) \
+ : "0" (_prev), "1" (_next) \
+ : "d0", "d2", "d3", "d4", "d5"); \
+ (last) = _last; \
+} while (0)
+
+
+/*
+ * Force strict CPU ordering.
+ * Not really required on m68k...
+ */
+#define nop() do { asm volatile ("nop"); barrier(); } while (0)
+#define mb() barrier()
+#define rmb() barrier()
+#define wmb() barrier()
+#define read_barrier_depends() ((void)0)
+#define set_mb(var, value) ({ (var) = (value); wmb(); })
+
+#define smp_mb() barrier()
+#define smp_rmb() barrier()
+#define smp_wmb() barrier()
+#define smp_read_barrier_depends() ((void)0)
+
+#define xchg(ptr,x) ((__typeof__(*(ptr)))__xchg((unsigned long)(x),(ptr),sizeof(*(ptr))))
+
+struct __xchg_dummy { unsigned long a[100]; };
+#define __xg(x) ((volatile struct __xchg_dummy *)(x))
+
+#ifndef CONFIG_RMW_INSNS
+static inline unsigned long __xchg(unsigned long x, volatile void * ptr, int size)
+{
+ unsigned long flags, tmp;
+
+ local_irq_save(flags);
+
+ switch (size) {
+ case 1:
+ tmp = *(u8 *)ptr;
+ *(u8 *)ptr = x;
+ x = tmp;
+ break;
+ case 2:
+ tmp = *(u16 *)ptr;
+ *(u16 *)ptr = x;
+ x = tmp;
+ break;
+ case 4:
+ tmp = *(u32 *)ptr;
+ *(u32 *)ptr = x;
+ x = tmp;
+ break;
+ default:
+ BUG();
+ }
+
+ local_irq_restore(flags);
+ return x;
+}
#else
-#include "system_mm.h"
+static inline unsigned long __xchg(unsigned long x, volatile void * ptr, int size)
+{
+ switch (size) {
+ case 1:
+ __asm__ __volatile__
+ ("moveb %2,%0\n\t"
+ "1:\n\t"
+ "casb %0,%1,%2\n\t"
+ "jne 1b"
+ : "=&d" (x) : "d" (x), "m" (*__xg(ptr)) : "memory");
+ break;
+ case 2:
+ __asm__ __volatile__
+ ("movew %2,%0\n\t"
+ "1:\n\t"
+ "casw %0,%1,%2\n\t"
+ "jne 1b"
+ : "=&d" (x) : "d" (x), "m" (*__xg(ptr)) : "memory");
+ break;
+ case 4:
+ __asm__ __volatile__
+ ("movel %2,%0\n\t"
+ "1:\n\t"
+ "casl %0,%1,%2\n\t"
+ "jne 1b"
+ : "=&d" (x) : "d" (x), "m" (*__xg(ptr)) : "memory");
+ break;
+ }
+ return x;
+}
#endif
+
+#include <asm-generic/cmpxchg-local.h>
+
+#define cmpxchg64_local(ptr, o, n) __cmpxchg64_local_generic((ptr), (o), (n))
+
+/*
+ * Atomic compare and exchange. Compare OLD with MEM, if identical,
+ * store NEW in MEM. Return the initial value in MEM. Success is
+ * indicated by comparing RETURN with OLD.
+ */
+#ifdef CONFIG_RMW_INSNS
+#define __HAVE_ARCH_CMPXCHG 1
+
+static inline unsigned long __cmpxchg(volatile void *p, unsigned long old,
+ unsigned long new, int size)
+{
+ switch (size) {
+ case 1:
+ __asm__ __volatile__ ("casb %0,%2,%1"
+ : "=d" (old), "=m" (*(char *)p)
+ : "d" (new), "0" (old), "m" (*(char *)p));
+ break;
+ case 2:
+ __asm__ __volatile__ ("casw %0,%2,%1"
+ : "=d" (old), "=m" (*(short *)p)
+ : "d" (new), "0" (old), "m" (*(short *)p));
+ break;
+ case 4:
+ __asm__ __volatile__ ("casl %0,%2,%1"
+ : "=d" (old), "=m" (*(int *)p)
+ : "d" (new), "0" (old), "m" (*(int *)p));
+ break;
+ }
+ return old;
+}
+
+#define cmpxchg(ptr, o, n) \
+ ((__typeof__(*(ptr)))__cmpxchg((ptr), (unsigned long)(o), \
+ (unsigned long)(n), sizeof(*(ptr))))
+#define cmpxchg_local(ptr, o, n) \
+ ((__typeof__(*(ptr)))__cmpxchg((ptr), (unsigned long)(o), \
+ (unsigned long)(n), sizeof(*(ptr))))
+#else
+
+/*
+ * cmpxchg_local and cmpxchg64_local are atomic wrt current CPU. Always make
+ * them available.
+ */
+#define cmpxchg_local(ptr, o, n) \
+ ((__typeof__(*(ptr)))__cmpxchg_local_generic((ptr), (unsigned long)(o),\
+ (unsigned long)(n), sizeof(*(ptr))))
+
+#include <asm-generic/cmpxchg.h>
+
+#endif
+
+#define arch_align_stack(x) (x)
+
+#endif /* __KERNEL__ */
+
+#endif /* _M68K_SYSTEM_H */
diff --git a/arch/m68k/include/asm/system_mm.h b/arch/m68k/include/asm/system_mm.h
deleted file mode 100644
index 47b01f4726b..00000000000
--- a/arch/m68k/include/asm/system_mm.h
+++ /dev/null
@@ -1,193 +0,0 @@
-#ifndef _M68K_SYSTEM_H
-#define _M68K_SYSTEM_H
-
-#include <linux/linkage.h>
-#include <linux/kernel.h>
-#include <linux/irqflags.h>
-#include <asm/segment.h>
-#include <asm/entry.h>
-
-#ifdef __KERNEL__
-
-/*
- * switch_to(n) should switch tasks to task ptr, first checking that
- * ptr isn't the current task, in which case it does nothing. This
- * also clears the TS-flag if the task we switched to has used the
- * math co-processor latest.
- */
-/*
- * switch_to() saves the extra registers, that are not saved
- * automatically by SAVE_SWITCH_STACK in resume(), ie. d0-d5 and
- * a0-a1. Some of these are used by schedule() and its predecessors
- * and so we might get see unexpected behaviors when a task returns
- * with unexpected register values.
- *
- * syscall stores these registers itself and none of them are used
- * by syscall after the function in the syscall has been called.
- *
- * Beware that resume now expects *next to be in d1 and the offset of
- * tss to be in a1. This saves a few instructions as we no longer have
- * to push them onto the stack and read them back right after.
- *
- * 02/17/96 - Jes Sorensen (jds@kom.auc.dk)
- *
- * Changed 96/09/19 by Andreas Schwab
- * pass prev in a0, next in a1
- */
-asmlinkage void resume(void);
-#define switch_to(prev,next,last) do { \
- register void *_prev __asm__ ("a0") = (prev); \
- register void *_next __asm__ ("a1") = (next); \
- register void *_last __asm__ ("d1"); \
- __asm__ __volatile__("jbsr resume" \
- : "=a" (_prev), "=a" (_next), "=d" (_last) \
- : "0" (_prev), "1" (_next) \
- : "d0", "d2", "d3", "d4", "d5"); \
- (last) = _last; \
-} while (0)
-
-
-/*
- * Force strict CPU ordering.
- * Not really required on m68k...
- */
-#define nop() do { asm volatile ("nop"); barrier(); } while (0)
-#define mb() barrier()
-#define rmb() barrier()
-#define wmb() barrier()
-#define read_barrier_depends() ((void)0)
-#define set_mb(var, value) ({ (var) = (value); wmb(); })
-
-#define smp_mb() barrier()
-#define smp_rmb() barrier()
-#define smp_wmb() barrier()
-#define smp_read_barrier_depends() ((void)0)
-
-#define xchg(ptr,x) ((__typeof__(*(ptr)))__xchg((unsigned long)(x),(ptr),sizeof(*(ptr))))
-
-struct __xchg_dummy { unsigned long a[100]; };
-#define __xg(x) ((volatile struct __xchg_dummy *)(x))
-
-#ifndef CONFIG_RMW_INSNS
-static inline unsigned long __xchg(unsigned long x, volatile void * ptr, int size)
-{
- unsigned long flags, tmp;
-
- local_irq_save(flags);
-
- switch (size) {
- case 1:
- tmp = *(u8 *)ptr;
- *(u8 *)ptr = x;
- x = tmp;
- break;
- case 2:
- tmp = *(u16 *)ptr;
- *(u16 *)ptr = x;
- x = tmp;
- break;
- case 4:
- tmp = *(u32 *)ptr;
- *(u32 *)ptr = x;
- x = tmp;
- break;
- default:
- BUG();
- }
-
- local_irq_restore(flags);
- return x;
-}
-#else
-static inline unsigned long __xchg(unsigned long x, volatile void * ptr, int size)
-{
- switch (size) {
- case 1:
- __asm__ __volatile__
- ("moveb %2,%0\n\t"
- "1:\n\t"
- "casb %0,%1,%2\n\t"
- "jne 1b"
- : "=&d" (x) : "d" (x), "m" (*__xg(ptr)) : "memory");
- break;
- case 2:
- __asm__ __volatile__
- ("movew %2,%0\n\t"
- "1:\n\t"
- "casw %0,%1,%2\n\t"
- "jne 1b"
- : "=&d" (x) : "d" (x), "m" (*__xg(ptr)) : "memory");
- break;
- case 4:
- __asm__ __volatile__
- ("movel %2,%0\n\t"
- "1:\n\t"
- "casl %0,%1,%2\n\t"
- "jne 1b"
- : "=&d" (x) : "d" (x), "m" (*__xg(ptr)) : "memory");
- break;
- }
- return x;
-}
-#endif
-
-#include <asm-generic/cmpxchg-local.h>
-
-#define cmpxchg64_local(ptr, o, n) __cmpxchg64_local_generic((ptr), (o), (n))
-
-/*
- * Atomic compare and exchange. Compare OLD with MEM, if identical,
- * store NEW in MEM. Return the initial value in MEM. Success is
- * indicated by comparing RETURN with OLD.
- */
-#ifdef CONFIG_RMW_INSNS
-#define __HAVE_ARCH_CMPXCHG 1
-
-static inline unsigned long __cmpxchg(volatile void *p, unsigned long old,
- unsigned long new, int size)
-{
- switch (size) {
- case 1:
- __asm__ __volatile__ ("casb %0,%2,%1"
- : "=d" (old), "=m" (*(char *)p)
- : "d" (new), "0" (old), "m" (*(char *)p));
- break;
- case 2:
- __asm__ __volatile__ ("casw %0,%2,%1"
- : "=d" (old), "=m" (*(short *)p)
- : "d" (new), "0" (old), "m" (*(short *)p));
- break;
- case 4:
- __asm__ __volatile__ ("casl %0,%2,%1"
- : "=d" (old), "=m" (*(int *)p)
- : "d" (new), "0" (old), "m" (*(int *)p));
- break;
- }
- return old;
-}
-
-#define cmpxchg(ptr, o, n) \
- ((__typeof__(*(ptr)))__cmpxchg((ptr), (unsigned long)(o), \
- (unsigned long)(n), sizeof(*(ptr))))
-#define cmpxchg_local(ptr, o, n) \
- ((__typeof__(*(ptr)))__cmpxchg((ptr), (unsigned long)(o), \
- (unsigned long)(n), sizeof(*(ptr))))
-#else
-
-/*
- * cmpxchg_local and cmpxchg64_local are atomic wrt current CPU. Always make
- * them available.
- */
-#define cmpxchg_local(ptr, o, n) \
- ((__typeof__(*(ptr)))__cmpxchg_local_generic((ptr), (unsigned long)(o),\
- (unsigned long)(n), sizeof(*(ptr))))
-
-#include <asm-generic/cmpxchg.h>
-
-#endif
-
-#define arch_align_stack(x) (x)
-
-#endif /* __KERNEL__ */
-
-#endif /* _M68K_SYSTEM_H */
diff --git a/arch/m68k/include/asm/system_no.h b/arch/m68k/include/asm/system_no.h
deleted file mode 100644
index 6fe9f93bc3f..00000000000
--- a/arch/m68k/include/asm/system_no.h
+++ /dev/null
@@ -1,153 +0,0 @@
-#ifndef _M68KNOMMU_SYSTEM_H
-#define _M68KNOMMU_SYSTEM_H
-
-#include <linux/linkage.h>
-#include <linux/irqflags.h>
-#include <asm/segment.h>
-#include <asm/entry.h>
-
-/*
- * switch_to(n) should switch tasks to task ptr, first checking that
- * ptr isn't the current task, in which case it does nothing. This
- * also clears the TS-flag if the task we switched to has used the
- * math co-processor latest.
- */
-/*
- * switch_to() saves the extra registers, that are not saved
- * automatically by SAVE_SWITCH_STACK in resume(), ie. d0-d5 and
- * a0-a1. Some of these are used by schedule() and its predecessors
- * and so we might get see unexpected behaviors when a task returns
- * with unexpected register values.
- *
- * syscall stores these registers itself and none of them are used
- * by syscall after the function in the syscall has been called.
- *
- * Beware that resume now expects *next to be in d1 and the offset of
- * tss to be in a1. This saves a few instructions as we no longer have
- * to push them onto the stack and read them back right after.
- *
- * 02/17/96 - Jes Sorensen (jds@kom.auc.dk)
- *
- * Changed 96/09/19 by Andreas Schwab
- * pass prev in a0, next in a1, offset of tss in d1, and whether
- * the mm structures are shared in d2 (to avoid atc flushing).
- */
-asmlinkage void resume(void);
-#define switch_to(prev,next,last) \
-{ \
- void *_last; \
- __asm__ __volatile__( \
- "movel %1, %%a0\n\t" \
- "movel %2, %%a1\n\t" \
- "jbsr resume\n\t" \
- "movel %%d1, %0\n\t" \
- : "=d" (_last) \
- : "d" (prev), "d" (next) \
- : "cc", "d0", "d1", "d2", "d3", "d4", "d5", "a0", "a1"); \
- (last) = _last; \
-}
-
-#define iret() __asm__ __volatile__ ("rte": : :"memory", "sp", "cc")
-
-/*
- * Force strict CPU ordering.
- * Not really required on m68k...
- */
-#define nop() asm volatile ("nop"::)
-#define mb() asm volatile ("" : : :"memory")
-#define rmb() asm volatile ("" : : :"memory")
-#define wmb() asm volatile ("" : : :"memory")
-#define set_mb(var, value) ({ (var) = (value); wmb(); })
-
-#define smp_mb() barrier()
-#define smp_rmb() barrier()
-#define smp_wmb() barrier()
-#define smp_read_barrier_depends() do { } while(0)
-
-#define read_barrier_depends() ((void)0)
-
-#define xchg(ptr,x) ((__typeof__(*(ptr)))__xchg((unsigned long)(x),(ptr),sizeof(*(ptr))))
-
-struct __xchg_dummy { unsigned long a[100]; };
-#define __xg(x) ((volatile struct __xchg_dummy *)(x))
-
-#ifndef CONFIG_RMW_INSNS
-static inline unsigned long __xchg(unsigned long x, volatile void * ptr, int size)
-{
- unsigned long tmp, flags;
-
- local_irq_save(flags);
-
- switch (size) {
- case 1:
- __asm__ __volatile__
- ("moveb %2,%0\n\t"
- "moveb %1,%2"
- : "=&d" (tmp) : "d" (x), "m" (*__xg(ptr)) : "memory");
- break;
- case 2:
- __asm__ __volatile__
- ("movew %2,%0\n\t"
- "movew %1,%2"
- : "=&d" (tmp) : "d" (x), "m" (*__xg(ptr)) : "memory");
- break;
- case 4:
- __asm__ __volatile__
- ("movel %2,%0\n\t"
- "movel %1,%2"
- : "=&d" (tmp) : "d" (x), "m" (*__xg(ptr)) : "memory");
- break;
- }
- local_irq_restore(flags);
- return tmp;
-}
-#else
-static inline unsigned long __xchg(unsigned long x, volatile void * ptr, int size)
-{
- switch (size) {
- case 1:
- __asm__ __volatile__
- ("moveb %2,%0\n\t"
- "1:\n\t"
- "casb %0,%1,%2\n\t"
- "jne 1b"
- : "=&d" (x) : "d" (x), "m" (*__xg(ptr)) : "memory");
- break;
- case 2:
- __asm__ __volatile__
- ("movew %2,%0\n\t"
- "1:\n\t"
- "casw %0,%1,%2\n\t"
- "jne 1b"
- : "=&d" (x) : "d" (x), "m" (*__xg(ptr)) : "memory");
- break;
- case 4:
- __asm__ __volatile__
- ("movel %2,%0\n\t"
- "1:\n\t"
- "casl %0,%1,%2\n\t"
- "jne 1b"
- : "=&d" (x) : "d" (x), "m" (*__xg(ptr)) : "memory");
- break;
- }
- return x;
-}
-#endif
-
-#include <asm-generic/cmpxchg-local.h>
-
-/*
- * cmpxchg_local and cmpxchg64_local are atomic wrt current CPU. Always make
- * them available.
- */
-#define cmpxchg_local(ptr, o, n) \
- ((__typeof__(*(ptr)))__cmpxchg_local_generic((ptr), (unsigned long)(o),\
- (unsigned long)(n), sizeof(*(ptr))))
-#define cmpxchg64_local(ptr, o, n) __cmpxchg64_local_generic((ptr), (o), (n))
-
-#include <asm-generic/cmpxchg.h>
-
-#define arch_align_stack(x) (x)
-
-
-#endif /* _M68KNOMMU_SYSTEM_H */
diff --git a/arch/m68k/platform/68328/entry.S b/arch/m68k/platform/68328/entry.S
index f68dce766c0..4ed7a65d5aa 100644
--- a/arch/m68k/platform/68328/entry.S
+++ b/arch/m68k/platform/68328/entry.S
@@ -241,22 +241,21 @@ ENTRY(bad_interrupt)
/*
* Beware - when entering resume, prev (the current task) is
- * in a0, next (the new task) is in a1,so don't change these
+ * in a0, next (the new task) is in a1, so don't change these
* registers until their contents are no longer needed.
*/
ENTRY(resume)
movel %a0,%d1 /* save prev thread in d1 */
movew %sr,%a0@(TASK_THREAD+THREAD_SR) /* save sr */
- movel %usp,%a2 /* save usp */
- movel %a2,%a0@(TASK_THREAD+THREAD_USP)
-
SAVE_SWITCH_STACK
movel %sp,%a0@(TASK_THREAD+THREAD_KSP) /* save kernel stack */
+ movel %usp,%a3 /* save usp */
+ movel %a3,%a0@(TASK_THREAD+THREAD_USP)
+
+ movel %a1@(TASK_THREAD+THREAD_USP),%a3 /* restore user stack */
+ movel %a3,%usp
movel %a1@(TASK_THREAD+THREAD_KSP),%sp /* restore new thread stack */
RESTORE_SWITCH_STACK
-
- movel %a1@(TASK_THREAD+THREAD_USP),%a0 /* restore user stack */
- movel %a0,%usp
movew %a1@(TASK_THREAD+THREAD_SR),%sr /* restore thread status reg */
rts
diff --git a/arch/m68k/platform/68360/entry.S b/arch/m68k/platform/68360/entry.S
index a07b14feed9..0ede6702127 100644
--- a/arch/m68k/platform/68360/entry.S
+++ b/arch/m68k/platform/68360/entry.S
@@ -162,22 +162,21 @@ bad_interrupt:
/*
* Beware - when entering resume, prev (the current task) is
- * in a0, next (the new task) is in a1,so don't change these
+ * in a0, next (the new task) is in a1, so don't change these
* registers until their contents are no longer needed.
*/
ENTRY(resume)
movel %a0,%d1 /* save prev thread in d1 */
movew %sr,%a0@(TASK_THREAD+THREAD_SR) /* save sr */
- movel %usp,%a2 /* save usp */
- movel %a2,%a0@(TASK_THREAD+THREAD_USP)
-
SAVE_SWITCH_STACK
movel %sp,%a0@(TASK_THREAD+THREAD_KSP) /* save kernel stack */
+ movel %usp,%a3 /* save usp */
+ movel %a3,%a0@(TASK_THREAD+THREAD_USP)
+
+ movel %a1@(TASK_THREAD+THREAD_USP),%a3 /* restore user stack */
+ movel %a3,%usp
movel %a1@(TASK_THREAD+THREAD_KSP),%sp /* restore new thread stack */
RESTORE_SWITCH_STACK
-
- movel %a1@(TASK_THREAD+THREAD_USP),%a0 /* restore user stack */
- movel %a0,%usp
movew %a1@(TASK_THREAD+THREAD_SR),%sr /* restore thread status reg */
rts
diff --git a/arch/m68k/platform/coldfire/entry.S b/arch/m68k/platform/coldfire/entry.S
index 27c2b001161..bd27242c2f4 100644
--- a/arch/m68k/platform/coldfire/entry.S
+++ b/arch/m68k/platform/coldfire/entry.S
@@ -182,21 +182,23 @@ ENTRY(inthandler)
/*
* Beware - when entering resume, prev (the current task) is
- * in a0, next (the new task) is in a1,so don't change these
+ * in a0, next (the new task) is in a1, so don't change these
* registers until their contents are no longer needed.
- * This is always called in supervisor mode, so don't bother to save
- * and restore sr; user's process sr is actually in the stack.
*/
ENTRY(resume)
- movel %a0, %d1 /* get prev thread in d1 */
- RDUSP
- movel %a2,%a0@(TASK_THREAD+THREAD_USP)
-
+ movew %sr,%d1 /* save current status */
+ movew %d1,%a0@(TASK_THREAD+THREAD_SR)
+ movel %a0,%d1 /* get prev thread in d1 */
SAVE_SWITCH_STACK
movel %sp,%a0@(TASK_THREAD+THREAD_KSP) /* save kernel stack pointer */
- movel %a1@(TASK_THREAD+THREAD_KSP),%sp /* restore new thread stack */
+ RDUSP /* movel %usp,%a3 */
+ movel %a3,%a0@(TASK_THREAD+THREAD_USP) /* save thread user stack */
+
+ movel %a1@(TASK_THREAD+THREAD_USP),%a3 /* restore thread user stack */
+ WRUSP /* movel %a3,%usp */
+ movel %a1@(TASK_THREAD+THREAD_KSP),%sp /* restore new kernel stack */
+ movew %a1@(TASK_THREAD+THREAD_SR),%d7 /* restore new status */
+ movew %d7,%sr
RESTORE_SWITCH_STACK
-
- movel %a1@(TASK_THREAD+THREAD_USP),%a0 /* restore thread user stack */
- WRUSP
rts
+
generated by cgit v1.2.3-18-g5258 (git 2.32.0) at 2024-12-01 01:58:03 +0000