diff options
| -rw-r--r-- | Documentation/ide/ide.txt (renamed from Documentation/ide.txt) | 20 |
1 files changed, 10 insertions, 10 deletions
diff --git a/Documentation/ide.txt b/Documentation/ide/ide.txt index bcd7cd1278e..e3b3425328b 100644 --- a/Documentation/ide.txt +++ b/Documentation/ide/ide.txt @@ -3,11 +3,11 @@ ============================================================================== - + The hdparm utility can be used to control various IDE features on a running system. It is packaged separately. Please Look for it on popular linux FTP sites. - + *** IMPORTANT NOTICES: BUGGY IDE CHIPSETS CAN CORRUPT DATA!! @@ -51,7 +51,7 @@ Common pitfalls: ================================================================================ -This is the multiple IDE interface driver, as evolved from hd.c. +This is the multiple IDE interface driver, as evolved from hd.c. It supports up to 9 IDE interfaces per default, on one or more IRQs (usually 14 & 15). There can be up to two drives per interface, as per the ATA-6 spec. @@ -215,17 +215,17 @@ Summary of ide driver parameters for kernel command line -------------------------------------------------------- "hdx=" is recognized for all "x" from "a" to "h", such as "hdc". - + "idex=" is recognized for all "x" from "0" to "3", such as "ide1". "hdx=noprobe" : drive may be present, but do not probe for it - + "hdx=none" : drive is NOT present, ignore cmos and do not probe - + "hdx=nowerr" : ignore the WRERR_STAT bit on this drive - + "hdx=cdrom" : drive is present, and is a cdrom drive - + "hdx=cyl,head,sect" : disk drive is present, with specified geometry "hdx=remap" : remap access of sector 0 to sector 1 (for EZDrive) @@ -261,7 +261,7 @@ Summary of ide driver parameters for kernel command line "idex=base" : probe for an interface at the addr specified, where "base" is usually 0x1f0 or 0x170 and "ctl" is assumed to be "base"+0x206 - + "idex=base,ctl" : specify both base and ctl "idex=base,ctl,irq" : specify base, ctl, and irq number @@ -272,7 +272,7 @@ Summary of ide driver parameters for kernel command line to take effect. "idex=four" : four drives on idex and ide(x^1) share same ports - + "idex=reset" : reset interface after probe "idex=ata66" : informs the interface that it has an 80c cable |