Merge git://git.kernel.org/pub/scm/linux/kernel/git/brodo/cpupowerutils

* git://git.kernel.org/pub/scm/linux/kernel/git/brodo/cpupowerutils:
  cpupower: Do detect IDA (opportunistic processor performance) via cpuid
  cpupower: Show Intel turbo ratio support via ./cpupower frequency-info
  cpupowerutils: increase MAX_LINE_LEN
  cpupower: Rename package from cpupowerutils to cpupower
  cpupowerutils: Rename: libcpufreq->libcpupower
  cpupowerutils: use kernel version-derived version string
  cpupowerutils: utils - ConfigStyle bugfixes
  cpupowerutils: helpers - ConfigStyle bugfixes
  cpupowerutils: idle_monitor - ConfigStyle bugfixes
  cpupowerutils: lib - ConfigStyle bugfixes
  cpupowerutils: bench - ConfigStyle bugfixes
  cpupowerutils: do not update po files on each and every compile
  cpupowerutils: remove ccdv, use kernel quiet/verbose mechanism
  cpupowerutils: use COPYING, CREDITS from top-level directory
  cpupowerutils - cpufrequtils extended with quite some features

70 files changed, 13855 insertions, 0 deletions

diff --git a/tools/power/cpupower/.gitignore b/tools/power/cpupower/.gitignore
new file mode 100644
index 00000000000..8a83dd2ffc1
--- /dev/null
+++ b/tools/power/cpupower/.gitignore
@@ -0,0 +1,22 @@
+.libs
+libcpupower.so
+libcpupower.so.0
+libcpupower.so.0.0.0
+build/ccdv
+cpufreq-info
+cpufreq-set
+cpufreq-aperf
+lib/.libs
+lib/cpufreq.lo
+lib/cpufreq.o
+lib/proc.lo
+lib/proc.o
+lib/sysfs.lo
+lib/sysfs.o
+po/cpupowerutils.pot
+po/*.gmo
+utils/cpufreq-info.o
+utils/cpufreq-set.o
+utils/cpufreq-aperf.o
+cpupower
+bench/cpufreq-bench
diff --git a/tools/power/cpupower/Makefile b/tools/power/cpupower/Makefile
new file mode 100644
index 00000000000..94c2cf0a98b
--- /dev/null
+++ b/tools/power/cpupower/Makefile
@@ -0,0 +1,279 @@
+# Makefile for cpupower
+#
+# Copyright (C) 2005,2006 Dominik Brodowski <linux@dominikbrodowski.net>
+#
+# Based largely on the Makefile for udev by:
+#
+# Copyright (C) 2003,2004 Greg Kroah-Hartman <greg@kroah.com>
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; version 2 of the License.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+#
+
+# --- CONFIGURATION BEGIN ---
+
+# Set the following to `true' to make a unstripped, unoptimized
+# binary. Leave this set to `false' for production use.
+DEBUG ?=	false
+
+# make the build silent. Set this to something else to make it noisy again.
+V ?=		false
+
+# Internationalization support (output in different languages).
+# Requires gettext.
+NLS ?=		true
+
+# Set the following to 'true' to build/install the
+# cpufreq-bench benchmarking tool
+CPUFRQ_BENCH ?= true
+
+# Prefix to the directories we're installing to
+DESTDIR ?=
+
+# --- CONFIGURATION END ---
+
+
+
+# Package-related definitions. Distributions can modify the version
+# and _should_ modify the PACKAGE_BUGREPORT definition
+
+VERSION=			$(shell ./utils/version-gen.sh)
+LIB_MAJ=			0.0.0
+LIB_MIN=			0
+
+PACKAGE =			cpupower
+PACKAGE_BUGREPORT =		cpufreq@vger.kernel.org
+LANGUAGES = 			de fr it cs pt
+
+
+# Directory definitions. These are default and most probably
+# do not need to be changed. Please note that DESTDIR is
+# added in front of any of them
+
+bindir ?=	/usr/bin
+sbindir ?=	/usr/sbin
+mandir ?=	/usr/man
+includedir ?=	/usr/include
+libdir ?=	/usr/lib
+localedir ?=	/usr/share/locale
+docdir ?=       /usr/share/doc/packages/cpupower
+confdir ?=      /etc/
+
+# Toolchain: what tools do we use, and what options do they need:
+
+CP = cp -fpR
+INSTALL = /usr/bin/install -c
+INSTALL_PROGRAM = ${INSTALL}
+INSTALL_DATA  = ${INSTALL} -m 644
+INSTALL_SCRIPT = ${INSTALL_PROGRAM}
+
+# If you are running a cross compiler, you may want to set this
+# to something more interesting, like "arm-linux-".  If you want
+# to compile vs uClibc, that can be done here as well.
+CROSS = #/usr/i386-linux-uclibc/usr/bin/i386-uclibc-
+CC = $(CROSS)gcc
+LD = $(CROSS)gcc
+AR = $(CROSS)ar
+STRIP = $(CROSS)strip
+RANLIB = $(CROSS)ranlib
+HOSTCC = gcc
+
+
+# Now we set up the build system
+#
+
+# set up PWD so that older versions of make will work with our build.
+PWD = $(shell pwd)
+
+GMO_FILES = ${shell for HLANG in ${LANGUAGES}; do echo po/$$HLANG.gmo; done;}
+
+export CROSS CC AR STRIP RANLIB CFLAGS LDFLAGS LIB_OBJS
+
+# check if compiler option is supported
+cc-supports = ${shell if $(CC) ${1} -S -o /dev/null -xc /dev/null > /dev/null 2>&1; then echo "$(1)"; fi;}
+
+# use '-Os' optimization if available, else use -O2
+OPTIMIZATION := $(call cc-supports,-Os,-O2)
+
+WARNINGS := -Wall -Wchar-subscripts -Wpointer-arith -Wsign-compare
+WARNINGS += $(call cc-supports,-Wno-pointer-sign)
+WARNINGS += $(call cc-supports,-Wdeclaration-after-statement)
+WARNINGS += -Wshadow
+
+CFLAGS += -DVERSION=\"$(VERSION)\" -DPACKAGE=\"$(PACKAGE)\" \
+		-DPACKAGE_BUGREPORT=\"$(PACKAGE_BUGREPORT)\" -D_GNU_SOURCE
+
+UTIL_OBJS =  utils/helpers/amd.o utils/helpers/topology.o utils/helpers/msr.o \
+	utils/helpers/sysfs.o utils/helpers/misc.o utils/helpers/cpuid.o \
+	utils/helpers/pci.o utils/helpers/bitmask.o \
+	utils/idle_monitor/nhm_idle.o utils/idle_monitor/snb_idle.o \
+	utils/idle_monitor/amd_fam14h_idle.o utils/idle_monitor/cpuidle_sysfs.o \
+	utils/idle_monitor/mperf_monitor.o utils/idle_monitor/cpupower-monitor.o \
+	utils/cpupower.o utils/cpufreq-info.o utils/cpufreq-set.o \
+	utils/cpupower-set.o utils/cpupower-info.o utils/cpuidle-info.o
+
+UTIL_HEADERS = utils/helpers/helpers.h utils/idle_monitor/cpupower-monitor.h \
+	utils/helpers/bitmask.h \
+	utils/idle_monitor/idle_monitors.h utils/idle_monitor/idle_monitors.def
+
+UTIL_SRC := $(UTIL_OBJS:.o=.c)
+
+LIB_HEADERS = 	lib/cpufreq.h lib/sysfs.h
+LIB_SRC = 	lib/cpufreq.c lib/sysfs.c
+LIB_OBJS = 	lib/cpufreq.o lib/sysfs.o
+
+CFLAGS +=	-pipe
+
+ifeq ($(strip $(NLS)),true)
+	INSTALL_NLS += install-gmo
+	COMPILE_NLS += create-gmo
+endif
+
+ifeq ($(strip $(CPUFRQ_BENCH)),true)
+	INSTALL_BENCH += install-bench
+	COMPILE_BENCH += compile-bench
+endif
+
+CFLAGS += $(WARNINGS)
+
+ifeq ($(strip $(V)),false)
+	QUIET=@
+	ECHO=@echo
+else
+	QUIET=
+	ECHO=@\#
+endif
+export QUIET ECHO
+
+# if DEBUG is enabled, then we do not strip or optimize
+ifeq ($(strip $(DEBUG)),true)
+	CFLAGS += -O1 -g -DDEBUG
+	STRIPCMD = /bin/true -Since_we_are_debugging
+else
+	CFLAGS += $(OPTIMIZATION) -fomit-frame-pointer
+	STRIPCMD = $(STRIP) -s --remove-section=.note --remove-section=.comment
+endif
+
+
+# the actual make rules
+
+all: libcpupower cpupower $(COMPILE_NLS) $(COMPILE_BENCH)
+
+lib/%.o: $(LIB_SRC) $(LIB_HEADERS)
+	$(ECHO) "  CC      " $@
+	$(QUIET) $(CC) $(CFLAGS) -fPIC -o $@ -c lib/$*.c
+
+libcpupower.so.$(LIB_MAJ): $(LIB_OBJS)
+	$(ECHO) "  LD      " $@
+	$(QUIET) $(CC) -shared $(CFLAGS) $(LDFLAGS) -o $@ \
+		-Wl,-soname,libcpupower.so.$(LIB_MIN) $(LIB_OBJS)
+	@ln -sf $@ libcpupower.so
+	@ln -sf $@ libcpupower.so.$(LIB_MIN)
+
+libcpupower: libcpupower.so.$(LIB_MAJ)
+
+# Let all .o files depend on its .c file and all headers
+# Might be worth to put this into utils/Makefile at some point of time
+$(UTIL_OBJS): $(UTIL_HEADERS)
+
+.c.o:
+	$(ECHO) "  CC      " $@
+	$(QUIET) $(CC) $(CFLAGS) -I./lib -I ./utils -o $@ -c $*.c
+
+cpupower: $(UTIL_OBJS) libcpupower.so.$(LIB_MAJ)
+	$(ECHO) "  CC      " $@
+	$(QUIET) $(CC) $(CFLAGS) $(LDFLAGS) -lcpupower -lrt -lpci -L. -o $@ $(UTIL_OBJS)
+	$(QUIET) $(STRIPCMD) $@
+
+po/$(PACKAGE).pot: $(UTIL_SRC)
+	$(ECHO) "  GETTEXT " $@
+	$(QUIET) xgettext --default-domain=$(PACKAGE) --add-comments \
+		--keyword=_ --keyword=N_ $(UTIL_SRC) && \
+	test -f $(PACKAGE).po && \
+	mv -f $(PACKAGE).po po/$(PACKAGE).pot
+
+po/%.gmo: po/%.po
+	$(ECHO) "  MSGFMT  " $@
+	$(QUIET) msgfmt -o $@ po/$*.po
+
+create-gmo: ${GMO_FILES}
+
+update-po: po/$(PACKAGE).pot
+	$(ECHO) "  MSGMRG  " $@
+	$(QUIET) @for HLANG in $(LANGUAGES); do \
+		echo -n "Updating $$HLANG "; \
+		if msgmerge po/$$HLANG.po po/$(PACKAGE).pot -o \
+		   po/$$HLANG.new.po; then \
+			mv -f po/$$HLANG.new.po po/$$HLANG.po; \
+		else \
+			echo "msgmerge for $$HLANG failed!"; \
+			rm -f po/$$HLANG.new.po; \
+		fi; \
+	done;
+
+compile-bench: libcpupower.so.$(LIB_MAJ)
+	@V=$(V) confdir=$(confdir) $(MAKE) -C bench
+
+clean:
+	-find . \( -not -type d \) -and \( -name '*~' -o -name '*.[oas]' \) -type f -print \
+	 | xargs rm -f
+	-rm -f $(UTIL_BINS)
+	-rm -f $(IDLE_OBJS)
+	-rm -f cpupower
+	-rm -f libcpupower.so*
+	-rm -rf po/*.gmo po/*.pot
+	$(MAKE) -C bench clean
+
+
+install-lib:
+	$(INSTALL) -d $(DESTDIR)${libdir}
+	$(CP) libcpupower.so* $(DESTDIR)${libdir}/
+	$(INSTALL) -d $(DESTDIR)${includedir}
+	$(INSTALL_DATA) lib/cpufreq.h $(DESTDIR)${includedir}/cpufreq.h
+
+install-tools:
+	$(INSTALL) -d $(DESTDIR)${bindir}
+	$(INSTALL_PROGRAM) cpupower $(DESTDIR)${bindir}
+
+install-man:
+	$(INSTALL_DATA) -D man/cpupower.1 $(DESTDIR)${mandir}/man1/cpupower.1
+	$(INSTALL_DATA) -D man/cpupower-frequency-set.1 $(DESTDIR)${mandir}/man1/cpupower-frequency-set.1
+	$(INSTALL_DATA) -D man/cpupower-frequency-info.1 $(DESTDIR)${mandir}/man1/cpupower-frequency-info.1
+	$(INSTALL_DATA) -D man/cpupower-set.1 $(DESTDIR)${mandir}/man1/cpupower-set.1
+	$(INSTALL_DATA) -D man/cpupower-info.1 $(DESTDIR)${mandir}/man1/cpupower-info.1
+	$(INSTALL_DATA) -D man/cpupower-monitor.1 $(DESTDIR)${mandir}/man1/cpupower-monitor.1
+
+install-gmo:
+	$(INSTALL) -d $(DESTDIR)${localedir}
+	for HLANG in $(LANGUAGES); do \
+		echo '$(INSTALL_DATA) -D po/$$HLANG.gmo $(DESTDIR)${localedir}/$$HLANG/LC_MESSAGES/cpupower.mo'; \
+		$(INSTALL_DATA) -D po/$$HLANG.gmo $(DESTDIR)${localedir}/$$HLANG/LC_MESSAGES/cpupower.mo; \
+	done;
+
+install-bench:
+	@#DESTDIR must be set from outside to survive
+	@sbindir=$(sbindir) bindir=$(bindir) docdir=$(docdir) confdir=$(confdir) $(MAKE) -C bench install
+
+install: all install-lib install-tools install-man $(INSTALL_NLS) $(INSTALL_BENCH)
+
+uninstall:
+	- rm -f $(DESTDIR)${libdir}/libcpupower.*
+	- rm -f $(DESTDIR)${includedir}/cpufreq.h
+	- rm -f $(DESTDIR)${bindir}/utils/cpupower
+	- rm -f $(DESTDIR)${mandir}/man1/cpufreq-set.1
+	- rm -f $(DESTDIR)${mandir}/man1/cpufreq-info.1
+	- for HLANG in $(LANGUAGES); do \
+		rm -f $(DESTDIR)${localedir}/$$HLANG/LC_MESSAGES/cpupower.mo; \
+	  done;
+
+.PHONY: all utils libcpupower update-po create-gmo install-lib install-tools install-man install-gmo install uninstall clean
diff --git a/tools/power/cpupower/README b/tools/power/cpupower/README
new file mode 100644
index 00000000000..fd9d4c0d668
--- /dev/null
+++ b/tools/power/cpupower/README
@@ -0,0 +1,49 @@
+The cpufrequtils package (homepage: 
+http://www.kernel.org/pub/linux/utils/kernel/cpufreq/cpufrequtils.html ) 
+consists of the following elements:
+
+requirements
+------------
+
+On x86 pciutils is needed at runtime (-lpci).
+For compilation pciutils-devel (pci/pci.h) and a gcc version
+providing cpuid.h is needed.
+For both it's not explicitly checked for (yet).
+
+
+libcpufreq
+----------
+
+"libcpufreq" is a library which offers a unified access method for userspace
+tools and programs to the cpufreq core and drivers in the Linux kernel. This
+allows for code reduction in userspace tools, a clean implementation of
+the interaction to the cpufreq core, and support for both the sysfs and proc
+interfaces [depending on configuration, see below].
+
+
+compilation and installation
+----------------------------
+
+make
+su
+make install
+
+should suffice on most systems. It builds default libcpufreq,
+cpufreq-set and cpufreq-info files and installs them in /usr/lib and
+/usr/bin, respectively. If you want to set up the paths differently and/or
+want to configure the package to your specific needs, you need to open
+"Makefile" with an editor of your choice and edit the block marked
+CONFIGURATION.
+
+
+THANKS
+------
+Many thanks to Mattia Dongili who wrote the autotoolization and
+libtoolization, the manpages and the italian language file for cpufrequtils;
+to Dave Jones for his feedback and his dump_psb tool; to Bruno Ducrot for his
+powernow-k8-decode and intel_gsic tools as well as the french language file;
+and to various others commenting on the previous (pre-)releases of 
+cpufrequtils.
+
+
+        Dominik Brodowski
diff --git a/tools/power/cpupower/ToDo b/tools/power/cpupower/ToDo
new file mode 100644
index 00000000000..874b78b586e
--- /dev/null
+++ b/tools/power/cpupower/ToDo
@@ -0,0 +1,11 @@
+ToDos sorted by priority:
+
+- Use bitmask functions to parse CPU topology more robust
+  (current implementation has issues on AMD)
+- Try to read out boost states and frequencies on Intel
+- Adjust README
+- Somewhere saw the ability to read power consumption of
+  RAM from HW on Intel SandyBridge -> another monitor?
+- Add another c1e debug idle monitor
+  -> Is by design racy with BIOS, but could be added
+     with a --force option and some "be careful" messages
diff --git a/tools/power/cpupower/bench/Makefile b/tools/power/cpupower/bench/Makefile
new file mode 100644
index 00000000000..2b67606fc3e
--- /dev/null
+++ b/tools/power/cpupower/bench/Makefile
@@ -0,0 +1,29 @@
+LIBS = -L../ -lm -lcpupower
+
+OBJS = main.o parse.o system.o benchmark.o
+CFLAGS += -D_GNU_SOURCE -I../lib -DDEFAULT_CONFIG_FILE=\"$(confdir)/cpufreq-bench.conf\"
+
+%.o : %.c
+	$(ECHO) "  CC      " $@
+	$(QUIET) $(CC) -c $(CFLAGS) $< -o $@
+
+cpufreq-bench: $(OBJS)
+	$(ECHO) "  CC      " $@
+	$(QUIET) $(CC) -o $@ $(CFLAGS) $(OBJS) $(LIBS)
+
+all: cpufreq-bench
+
+install:
+	mkdir -p $(DESTDIR)/$(sbindir)
+	mkdir -p $(DESTDIR)/$(bindir)
+	mkdir -p $(DESTDIR)/$(docdir)
+	mkdir -p $(DESTDIR)/$(confdir)
+	install -m 755 cpufreq-bench $(DESTDIR)/$(sbindir)/cpufreq-bench
+	install -m 755 cpufreq-bench_plot.sh $(DESTDIR)/$(bindir)/cpufreq-bench_plot.sh
+	install -m 644 README-BENCH $(DESTDIR)/$(docdir)/README-BENCH
+	install -m 755 cpufreq-bench_script.sh $(DESTDIR)/$(docdir)/cpufreq-bench_script.sh
+	install -m 644 example.cfg $(DESTDIR)/$(confdir)/cpufreq-bench.conf
+
+clean:
+	rm -f *.o
+	rm -f cpufreq-bench
diff --git a/tools/power/cpupower/bench/README-BENCH b/tools/power/cpupower/bench/README-BENCH
new file mode 100644
index 00000000000..8093ec73817
--- /dev/null
+++ b/tools/power/cpupower/bench/README-BENCH
@@ -0,0 +1,124 @@
+This is cpufreq-bench, a microbenchmark for the cpufreq framework.
+
+Purpose
+=======
+
+What is this benchmark for:
+  - Identify worst case performance loss when doing dynamic frequency
+    scaling using Linux kernel governors
+  - Identify average reaction time of a governor to CPU load changes
+  - (Stress) Testing whether a cpufreq low level driver or governor works
+    as expected
+  - Identify cpufreq related performance regressions between kernels
+  - Possibly Real time priority testing? -> what happens if there are
+    processes with a higher prio than the governor's kernel thread
+  - ...
+
+What this benchmark does *not* cover:
+  - Power saving related regressions (In fact as better the performance
+    throughput is, the worse the power savings will be, but the first should
+    mostly count more...)
+  - Real world (workloads)
+
+
+Description
+===========
+
+cpufreq-bench helps to test the condition of a given cpufreq governor.
+For that purpose, it compares the performance governor to a configured
+powersave module.
+
+
+How it works
+============
+You can specify load (100% CPU load) and sleep (0% CPU load) times in us which
+will be run X time in a row (cycles):
+
+         sleep=25000
+         load=25000
+         cycles=20
+
+This part of the configuration file will create 25ms load/sleep turns,
+repeated 20 times.
+
+Adding this:
+         sleep_step=25000
+         load_step=25000
+         rounds=5
+Will increase load and sleep time by 25ms 5 times.
+Together you get following test:
+25ms  load/sleep time repeated 20 times (cycles).
+50ms  load/sleep time repeated 20 times (cycles).
+..
+100ms load/sleep time repeated 20 times (cycles).
+
+First it is calibrated how long a specific CPU intensive calculation
+takes on this machine and needs to be run in a loop using the performance
+governor.
+Then the above test runs are processed using the performance governor
+and the governor to test. The time the calculation really needed
+with the dynamic freq scaling governor is compared with the time needed