ktest: Detect typos in option names

It becomes quite annoying when you go to run a test and then
realize that you typed an option name wrong, and the test starts
doing the default action and not what you expected it to do.

It is even more annoying when you wake up the next day after
running the test over night when you discover this.

By testing if all options specified in a config file are
used by either ktest or were used in one of the option's values
we can see if there are any dangling options that were not used.
In such a case, show the user the options that were not used
and ask them if they want to continue or not.

The option IGNORE_UNUSED was also added to allow the user to
override this feature.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

1 files changed, 128 insertions, 80 deletions

diff --git a/tools/testing/ktest/ktest.pl b/tools/testing/ktest/ktest.pl
index 5ba9ad4248d..f360cbdbf00 100755
--- a/tools/testing/ktest/ktest.pl
+++ b/tools/testing/ktest/ktest.pl
@@ -58,6 +58,9 @@ my %default = (
     "SSH_USER"			=> "root",
     "BUILD_TARGET"	 	=> "arch/x86/boot/bzImage",
     "TARGET_IMAGE"		=> "/boot/vmlinuz-test",
+
+    "LOG_FILE"			=> undef,
+    "IGNORE_UNUSED"		=> 0,
 );
 
 my $ktest_config;
@@ -176,6 +179,92 @@ my %force_config;
 # do not force reboots on config problems
 my $no_reboot = 1;
 
+my %option_map = (
+    "MACHINE"			=> \$machine,
+    "SSH_USER"			=> \$ssh_user,
+    "TMP_DIR"			=> \$tmpdir,
+    "OUTPUT_DIR"		=> \$outputdir,
+    "BUILD_DIR"			=> \$builddir,
+    "TEST_TYPE"			=> \$test_type,
+    "BUILD_TYPE"		=> \$build_type,
+    "BUILD_OPTIONS"		=> \$build_options,
+    "PRE_BUILD"			=> \$pre_build,
+    "POST_BUILD"		=> \$post_build,
+    "PRE_BUILD_DIE"		=> \$pre_build_die,
+    "POST_BUILD_DIE"		=> \$post_build_die,
+    "POWER_CYCLE"		=> \$power_cycle,
+    "REBOOT"			=> \$reboot,
+    "BUILD_NOCLEAN"		=> \$noclean,
+    "MIN_CONFIG"		=> \$minconfig,
+    "OUTPUT_MIN_CONFIG"		=> \$output_minconfig,
+    "START_MIN_CONFIG"		=> \$start_minconfig,
+    "IGNORE_CONFIG"		=> \$ignore_config,
+    "TEST"			=> \$run_test,
+    "ADD_CONFIG"		=> \$addconfig,
+    "REBOOT_TYPE"		=> \$reboot_type,
+    "GRUB_MENU"			=> \$grub_menu,
+    "POST_INSTALL"		=> \$post_install,
+    "NO_INSTALL"		=> \$no_install,
+    "REBOOT_SCRIPT"		=> \$reboot_script,
+    "REBOOT_ON_ERROR"		=> \$reboot_on_error,
+    "SWITCH_TO_GOOD"		=> \$switch_to_good,
+    "SWITCH_TO_TEST"		=> \$switch_to_test,
+    "POWEROFF_ON_ERROR"		=> \$poweroff_on_error,
+    "DIE_ON_FAILURE"		=> \$die_on_failure,
+    "POWER_OFF"			=> \$power_off,
+    "POWERCYCLE_AFTER_REBOOT"	=> \$powercycle_after_reboot,
+    "POWEROFF_AFTER_HALT"	=> \$poweroff_after_halt,
+    "SLEEP_TIME"		=> \$sleep_time,
+    "BISECT_SLEEP_TIME"		=> \$bisect_sleep_time,
+    "PATCHCHECK_SLEEP_TIME"	=> \$patchcheck_sleep_time,
+    "IGNORE_WARNINGS"		=> \$ignore_warnings,
+    "BISECT_MANUAL"		=> \$bisect_manual,
+    "BISECT_SKIP"		=> \$bisect_skip,
+    "CONFIG_BISECT_GOOD"	=> \$config_bisect_good,
+    "BISECT_RET_GOOD"		=> \$bisect_ret_good,
+    "BISECT_RET_BAD"		=> \$bisect_ret_bad,
+    "BISECT_RET_SKIP"		=> \$bisect_ret_skip,
+    "BISECT_RET_ABORT"		=> \$bisect_ret_abort,
+    "BISECT_RET_DEFAULT"	=> \$bisect_ret_default,
+    "STORE_FAILURES"		=> \$store_failures,
+    "STORE_SUCCESSES"		=> \$store_successes,
+    "TEST_NAME"			=> \$test_name,
+    "TIMEOUT"			=> \$timeout,
+    "BOOTED_TIMEOUT"		=> \$booted_timeout,
+    "CONSOLE"			=> \$console,
+    "DETECT_TRIPLE_FAULT"	=> \$detect_triplefault,
+    "SUCCESS_LINE"		=> \$success_line,
+    "REBOOT_SUCCESS_LINE"	=> \$reboot_success_line,
+    "STOP_AFTER_SUCCESS"	=> \$stop_after_success,
+    "STOP_AFTER_FAILURE"	=> \$stop_after_failure,
+    "STOP_TEST_AFTER"		=> \$stop_test_after,
+    "BUILD_TARGET"		=> \$build_target,
+    "SSH_EXEC"			=> \$ssh_exec,
+    "SCP_TO_TARGET"		=> \$scp_to_target,
+    "CHECKOUT"			=> \$checkout,
+    "TARGET_IMAGE"		=> \$target_image,
+    "LOCALVERSION"		=> \$localversion,
+
+    "BISECT_GOOD"		=> \$bisect_good,
+    "BISECT_BAD"		=> \$bisect_bad,
+    "BISECT_TYPE"		=> \$bisect_type,
+    "BISECT_START"		=> \$bisect_start,
+    "BISECT_REPLAY"		=> \$bisect_replay,
+    "BISECT_FILES"		=> \$bisect_files,
+    "BISECT_REVERSE"		=> \$bisect_reverse,
+    "BISECT_CHECK"		=> \$bisect_check,
+
+    "CONFIG_BISECT"		=> \$config_bisect,
+    "CONFIG_BISECT_TYPE"	=> \$config_bisect_type,
+
+    "PATCHCHECK_TYPE"		=> \$patchcheck_type,
+    "PATCHCHECK_START"		=> \$patchcheck_start,
+    "PATCHCHECK_END"		=> \$patchcheck_end,
+);
+
+# Options may be used by other options, record them.
+my %used_options;
+
 # default variables that can be used
 chomp ($variable{"PWD"} = `pwd`);
 
@@ -427,6 +516,10 @@ sub process_variables {
 	} else {
 	    # put back the origin piece.
 	    $retval = "$retval\$\{$var\}";
+	    # This could be an option that is used later, save
+	    # it so we don't warn if this option is not one of
+	    # ktests options.
+	    $used_options{$var} = 1;
 	}
 	$value = $end;
     }
@@ -850,6 +943,37 @@ sub read_config {
 	    $opt{$default} = $default{$default};
 	}
     }
+
+    if ($opt{"IGNORE_UNUSED"} == 1) {
+	return;
+    }
+
+    my %not_used;
+
+    # check if there are any stragglers (typos?)
+    foreach my $option (keys %opt) {
+	my $op = $option;
+	# remove per test labels.
+	$op =~ s/\[.*\]//;
+	if (!exists($option_map{$op}) &&
+	    !exists($default{$op}) &&
+	    !exists($used_options{$op})) {
+	    $not_used{$op} = 1;
+	}
+    }
+
+    if (%not_used) {
+	my $s = "s are";
+	$s = " is" if (keys %not_used == 1);
+	print "The following option$s not used; could be a typo:\n";
+	foreach my $option (keys %not_used) {
+	    print "$option\n";
+	}
+	print "Set IGRNORE_UNUSED = 1 to have ktest ignore unused variables\n";
+	if (!read_yn "Do you want to continue?") {
+	    exit -1;
+	}
+    }
 }
 
 sub __eval_option {
@@ -3321,86 +3445,10 @@ for (my $i = 1; $i <= $opt{"NUM_TESTS"}; $i++) {
 
     my $makecmd = set_test_option("MAKE_CMD", $i);
 
-    $machine = set_test_option("MACHINE", $i);
-    $ssh_user = set_test_option("SSH_USER", $i);
-    $tmpdir = set_test_option("TMP_DIR", $i);
-    $outputdir = set_test_option("OUTPUT_DIR", $i);
-    $builddir = set_test_option("BUILD_DIR", $i);
-    $test_type = set_test_option("TEST_TYPE", $i);
-    $build_type = set_test_option("BUILD_TYPE", $i);
-    $build_options = set_test_option("BUILD_OPTIONS", $i);
-    $pre_build = set_test_option("PRE_BUILD", $i);
-    $post_build = set_test_option("POST_BUILD", $i);
-    $pre_build_die = set_test_option("PRE_BUILD_DIE", $i);
-    $post_build_die = set_test_option("POST_BUILD_DIE", $i);
-    $power_cycle = set_test_option("POWER_CYCLE", $i);
-    $reboot = set_test_option("REBOOT", $i);
-    $noclean = set_test_option("BUILD_NOCLEAN", $i);
-    $minconfig = set_test_option("MIN_CONFIG", $i);
-    $output_minconfig = set_test_option("OUTPUT_MIN_CONFIG", $i);
-    $start_minconfig = set_test_option("START_MIN_CONFIG", $i);
-    $ignore_config = set_test_option("IGNORE_CONFIG", $i);
-    $run_test = set_test_option("TEST", $i);
-    $addconfig = set_test_option("ADD_CONFIG", $i);
-    $reboot_type = set_test_option("REBOOT_TYPE", $i);
-    $grub_menu = set_test_option("GRUB_MENU", $i);
-    $post_install = set_test_option("POST_INSTALL", $i);
-    $no_install = set_test_option("NO_INSTALL", $i);
-    $reboot_script = set_test_option("REBOOT_SCRIPT", $i);
-    $reboot_on_error = set_test_option("REBOOT_ON_ERROR", $i);
-    $switch_to_good = set_test_option("SWITCH_TO_GOOD", $i);
-    $switch_to_test = set_test_option("SWITCH_TO_TEST", $i);
-    $poweroff_on_error = set_test_option("POWEROFF_ON_ERROR", $i);
-    $die_on_failure = set_test_option("DIE_ON_FAILURE", $i);
-    $power_off = set_test_option("POWER_OFF", $i);
-    $powercycle_after_reboot = set_test_option("POWERCYCLE_AFTER_REBOOT", $i);
-    $poweroff_after_halt = set_test_option("POWEROFF_AFTER_HALT", $i);
-    $sleep_time = set_test_option("SLEEP_TIME", $i);
-    $bisect_sleep_time = set_test_option("BISECT_SLEEP_TIME", $i);
-    $patchcheck_sleep_time = set_test_option("PATCHCHECK_SLEEP_TIME", $i);
-    $ignore_warnings = set_test_option("IGNORE_WARNINGS", $i);
-    $bisect_manual = set_test_option("BISECT_MANUAL", $i);
-    $bisect_skip = set_test_option("BISECT_SKIP", $i);
-    $config_bisect_good = set_test_option("CONFIG_BISECT_GOOD", $i);
-    $bisect_ret_good = set_test_option("BISECT_RET_GOOD", $i);
-    $bisect_ret_bad = set_test_option("BISECT_RET_BAD", $i);
-    $bisect_ret_skip = set_test_option("BISECT_RET_SKIP", $i);
-    $bisect_ret_abort = set_test_option("BISECT_RET_ABORT", $i);
-    $bisect_ret_default = set_test_option("BISECT_RET_DEFAULT", $i);
-    $store_failures = set_test_option("STORE_FAILURES", $i);
-    $store_successes = set_test_option("STORE_SUCCESSES", $i);
-    $test_name = set_test_option("TEST_NAME", $i);
-    $timeout = set_test_option("TIMEOUT", $i);
-    $booted_timeout = set_test_option("BOOTED_TIMEOUT", $i);
-    $console = set_test_option("CONSOLE", $i);
-    $detect_triplefault = set_test_option("DETECT_TRIPLE_FAULT", $i);
-    $success_line = set_test_option("SUCCESS_LINE", $i);
-    $reboot_success_line = set_test_option("REBOOT_SUCCESS_LINE", $i);
-    $stop_after_success = set_test_option("STOP_AFTER_SUCCESS", $i);
-    $stop_after_failure = set_test_option("STOP_AFTER_FAILURE", $i);
-    $stop_test_after = set_test_option("STOP_TEST_AFTER", $i);
-    $build_target = set_test_option("BUILD_TARGET", $i);
-    $ssh_exec = set_test_option("SSH_EXEC", $i);
-    $scp_to_target = set_test_option("SCP_TO_TARGET", $i);
-    $checkout = set_test_option("CHECKOUT", $i);
-    $target_image = set_test_option("TARGET_IMAGE", $i);
-    $localversion = set_test_option("LOCALVERSION", $i);
-
-    $bisect_good = set_test_option("BISECT_GOOD", $i);
-    $bisect_bad = set_test_option("BISECT_BAD", $i);
-    $bisect_type = set_test_option("BISECT_TYPE", $i);
-    $bisect_start = set_test_option("BISECT_START", $i);
-    $bisect_replay = set_test_option("BISECT_REPLAY", $i);
-    $bisect_files = set_test_option("BISECT_FILES", $i);
-    $bisect_reverse = set_test_option("BISECT_REVERSE", $i);
-    $bisect_check = set_test_option("BISECT_CHECK", $i);
-
-    $config_bisect = set_test_option("CONFIG_BISECT", $i);
-    $config_bisect_type = set_test_option("CONFIG_BISECT_TYPE", $i);
-
-    $patchcheck_type = set_test_option("PATCHCHECK_TYPE", $i);
-    $patchcheck_start = set_test_option("PATCHCHECK_START", $i);
-    $patchcheck_end = set_test_option("PATCHCHECK_END", $i);
+    # Load all the options into their mapped variable names
+    foreach my $opt (keys %option_map) {
+	${$option_map{$opt}} = set_test_option($opt, $i);
+    }
 
     $start_minconfig_defined = 1;