Merge branch 'topic/hda' into for-linus

29 files changed, 18596 insertions, 21220 deletions

diff --git a/sound/pci/hda/Kconfig b/sound/pci/hda/Kconfig
index 0ea5cc60ac7..7489b460855 100644
--- a/sound/pci/hda/Kconfig
+++ b/sound/pci/hda/Kconfig
@@ -14,6 +14,19 @@ menuconfig SND_HDA_INTEL
 
 if SND_HDA_INTEL
 
+config SND_HDA_PREALLOC_SIZE
+	int "Pre-allocated buffer size for HD-audio driver"
+	range 0 32768
+	default 64
+	help
+	  Specifies the default pre-allocated buffer-size in kB for the
+	  HD-audio driver.  A larger buffer (e.g. 2048) is preferred
+	  for systems using PulseAudio.  The default 64 is chosen just
+	  for compatibility reasons.
+
+	  Note that the pre-allocation size can be changed dynamically
+	  via a proc file (/proc/asound/card*/pcm*/sub*/prealloc), too.
+
 config SND_HDA_HWDEP
 	bool "Build hwdep interface for HD-audio driver"
 	select SND_HWDEP
@@ -83,6 +96,19 @@ config SND_HDA_CODEC_REALTEK
 	  snd-hda-codec-realtek.
 	  This module is automatically loaded at probing.
 
+config SND_HDA_ENABLE_REALTEK_QUIRKS
+	bool "Build static quirks for Realtek codecs"
+	depends on SND_HDA_CODEC_REALTEK
+	default y
+	help
+	  Say Y here to build the static quirks codes for Realtek codecs.
+	  If you need the "model" preset that the default BIOS auto-parser
+	  can't handle, turn this option on.
+
+	  If your device works with model=auto option, basically you don't
+	  need the quirk code.  By turning this off, you can reduce the
+	  module size quite a lot.
+
 config SND_HDA_CODEC_ANALOG
 	bool "Build Analog Device HD-audio codec support"
 	default y
@@ -171,6 +197,19 @@ config SND_HDA_CODEC_CA0110
 	  snd-hda-codec-ca0110.
 	  This module is automatically loaded at probing.
 
+config SND_HDA_CODEC_CA0132
+	bool "Build Creative CA0132 codec support"
+	depends on SND_HDA_INTEL
+	default y
+	help
+	  Say Y here to include Creative CA0132 codec support in
+	  snd-hda-intel driver.
+
+	  When the HD-audio driver is built as a module, the codec
+	  support code is also built as another module,
+	  snd-hda-codec-ca0132.
+	  This module is automatically loaded at probing.
+
 config SND_HDA_CODEC_CMEDIA
 	bool "Build C-Media HD-audio codec support"
 	default y
diff --git a/sound/pci/hda/Makefile b/sound/pci/hda/Makefile
index 17ef3658f34..87365d5ea2a 100644
--- a/sound/pci/hda/Makefile
+++ b/sound/pci/hda/Makefile
@@ -13,6 +13,7 @@ snd-hda-codec-idt-objs :=	patch_sigmatel.o
 snd-hda-codec-si3054-objs :=	patch_si3054.o
 snd-hda-codec-cirrus-objs :=	patch_cirrus.o
 snd-hda-codec-ca0110-objs :=	patch_ca0110.o
+snd-hda-codec-ca0132-objs :=	patch_ca0132.o
 snd-hda-codec-conexant-objs :=	patch_conexant.o
 snd-hda-codec-via-objs :=	patch_via.o
 snd-hda-codec-hdmi-objs :=	patch_hdmi.o hda_eld.o
@@ -42,6 +43,9 @@ endif
 ifdef CONFIG_SND_HDA_CODEC_CA0110
 obj-$(CONFIG_SND_HDA_INTEL) += snd-hda-codec-ca0110.o
 endif
+ifdef CONFIG_SND_HDA_CODEC_CA0132
+obj-$(CONFIG_SND_HDA_INTEL) += snd-hda-codec-ca0132.o
+endif
 ifdef CONFIG_SND_HDA_CODEC_CONEXANT
 obj-$(CONFIG_SND_HDA_INTEL) += snd-hda-codec-conexant.o
 endif
diff --git a/sound/pci/hda/alc260_quirks.c b/sound/pci/hda/alc260_quirks.c
new file mode 100644
index 00000000000..21ec2cb100b
--- /dev/null
+++ b/sound/pci/hda/alc260_quirks.c
@@ -0,0 +1,1272 @@
+/*
+ * ALC260 quirk models
+ * included by patch_realtek.c
+ */
+
+/* ALC260 models */
+enum {
+	ALC260_AUTO,
+	ALC260_BASIC,
+	ALC260_HP,
+	ALC260_HP_DC7600,
+	ALC260_HP_3013,
+	ALC260_FUJITSU_S702X,
+	ALC260_ACER,
+	ALC260_WILL,
+	ALC260_REPLACER_672V,
+	ALC260_FAVORIT100,
+#ifdef CONFIG_SND_DEBUG
+	ALC260_TEST,
+#endif
+	ALC260_MODEL_LAST /* last tag */
+};
+
+static const hda_nid_t alc260_dac_nids[1] = {
+	/* front */
+	0x02,
+};
+
+static const hda_nid_t alc260_adc_nids[1] = {
+	/* ADC0 */
+	0x04,
+};
+
+static const hda_nid_t alc260_adc_nids_alt[1] = {
+	/* ADC1 */
+	0x05,
+};
+
+/* NIDs used when simultaneous access to both ADCs makes sense.  Note that
+ * alc260_capture_mixer assumes ADC0 (nid 0x04) is the first ADC.
+ */
+static const hda_nid_t alc260_dual_adc_nids[2] = {
+	/* ADC0, ADC1 */
+	0x04, 0x05
+};
+
+#define ALC260_DIGOUT_NID	0x03
+#define ALC260_DIGIN_NID	0x06
+
+static const struct hda_input_mux alc260_capture_source = {
+	.num_items = 4,
+	.items = {
+		{ "Mic", 0x0 },
+		{ "Front Mic", 0x1 },
+		{ "Line", 0x2 },
+		{ "CD", 0x4 },
+	},
+};
+
+/* On Fujitsu S702x laptops capture only makes sense from Mic/LineIn jack,
+ * headphone jack and the internal CD lines since these are the only pins at
+ * which audio can appear.  For flexibility, also allow the option of
+ * recording the mixer output on the second ADC (ADC0 doesn't have a
+ * connection to the mixer output).
+ */
+static const struct hda_input_mux alc260_fujitsu_capture_sources[2] = {
+	{
+		.num_items = 3,
+		.items = {
+			{ "Mic/Line", 0x0 },
+			{ "CD", 0x4 },
+			{ "Headphone", 0x2 },
+		},
+	},
+	{
+		.num_items = 4,
+		.items = {
+			{ "Mic/Line", 0x0 },
+			{ "CD", 0x4 },
+			{ "Headphone", 0x2 },
+			{ "Mixer", 0x5 },
+		},
+	},
+
+};
+
+/* Acer TravelMate(/Extensa/Aspire) notebooks have similar configuration to
+ * the Fujitsu S702x, but jacks are marked differently.
+ */
+static const struct hda_input_mux alc260_acer_capture_sources[2] = {
+	{
+		.num_items = 4,
+		.items = {
+			{ "Mic", 0x0 },
+			{ "Line", 0x2 },
+			{ "CD", 0x4 },
+			{ "Headphone", 0x5 },
+		},
+	},
+	{
+		.num_items = 5,
+		.items = {
+			{ "Mic", 0x0 },
+			{ "Line", 0x2 },
+			{ "CD", 0x4 },
+			{ "Headphone", 0x6 },
+			{ "Mixer", 0x5 },
+		},
+	},
+};
+
+/* Maxdata Favorit 100XS */
+static const struct hda_input_mux alc260_favorit100_capture_sources[2] = {
+	{
+		.num_items = 2,
+		.items = {
+			{ "Line/Mic", 0x0 },
+			{ "CD", 0x4 },
+		},
+	},
+	{
+		.num_items = 3,
+		.items = {
+			{ "Line/Mic", 0x0 },
+			{ "CD", 0x4 },
+			{ "Mixer", 0x5 },
+		},
+	},
+};
+
+/*
+ * This is just place-holder, so there's something for alc_build_pcms to look
+ * at when it calculates the maximum number of channels. ALC260 has no mixer
+ * element which allows changing the channel mode, so the verb list is
+ * never used.
+ */
+static const struct hda_channel_mode alc260_modes[1] = {
+	{ 2, NULL },
+};
+
+
+/* Mixer combinations
+ *
+ * basic: base_output + input + pc_beep + capture
+ * HP: base_output + input + capture_alt
+ * HP_3013: hp_3013 + input + capture
+ * fujitsu: fujitsu + capture
+ * acer: acer + capture
+ */
+
+static const struct snd_kcontrol_new alc260_base_output_mixer[] = {
+	HDA_CODEC_VOLUME("Front Playback Volume", 0x08, 0x0, HDA_OUTPUT),
+	HDA_BIND_MUTE("Front Playback Switch", 0x08, 2, HDA_INPUT),
+	HDA_CODEC_VOLUME("Headphone Playback Volume", 0x09, 0x0, HDA_OUTPUT),
+	HDA_BIND_MUTE("Headphone Playback Switch", 0x09, 2, HDA_INPUT),
+	HDA_CODEC_VOLUME_MONO("Mono Playback Volume", 0x0a, 1, 0x0, HDA_OUTPUT),
+	HDA_BIND_MUTE_MONO("Mono Playback Switch", 0x0a, 1, 2, HDA_INPUT),
+	{ } /* end */
+};
+
+static const struct snd_kcontrol_new alc260_input_mixer[] = {
+	HDA_CODEC_VOLUME("CD Playback Volume", 0x07, 0x04, HDA_INPUT),
+	HDA_CODEC_MUTE("CD Playback Switch", 0x07, 0x04, HDA_INPUT),
+	HDA_CODEC_VOLUME("Line Playback Volume", 0x07, 0x02, HDA_INPUT),
+	HDA_CODEC_MUTE("Line Playback Switch", 0x07, 0x02, HDA_INPUT),
+	HDA_CODEC_VOLUME("Mic Playback Volume", 0x07, 0x0, HDA_INPUT),
+	HDA_CODEC_MUTE("Mic Playback Switch", 0x07, 0x0, HDA_INPUT),
+	HDA_CODEC_VOLUME("Front Mic Playback Volume", 0x07, 0x01, HDA_INPUT),
+	HDA_CODEC_MUTE("Front Mic Playback Switch", 0x07, 0x01, HDA_INPUT),
+	{ } /* end */
+};
+
+/* update HP, line and mono out pins according to the master switch */
+static void alc260_hp_master_update(struct hda_codec *codec)
+{
+	update_speakers(codec);
+}
+
+static int alc260_hp_master_sw_get(struct snd_kcontrol *kcontrol,
+				   struct snd_ctl_elem_value *ucontrol)
+{
+	struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
+	struct alc_spec *spec = codec->spec;
+	*ucontrol->value.integer.value = !spec->master_mute;
+	return 0;
+}
+
+static int alc260_hp_master_sw_put(struct snd_kcontrol *kcontrol,
+				   struct snd_ctl_elem_value *ucontrol)
+{
+	struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
+	struct alc_spec *spec = codec->spec;
+	int val = !*ucontrol->value.integer.value;
+
+	if (val == spec->master_mute)
+		return 0;
+	spec->master_mute = val;
+	alc260_hp_master_update(codec);
+	return 1;
+}
+
+static const struct snd_kcontrol_new alc260_hp_output_mixer[] = {
+	{
+		.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+		.name = "Master Playback Switch",
+		.subdevice = HDA_SUBDEV_NID_FLAG | 0x11,
+		.info = snd_ctl_boolean_mono_info,
+		.get = alc260_hp_master_sw_get,
+		.put = alc260_hp_master_sw_put,
+	},
+	HDA_CODEC_VOLUME("Front Playback Volume", 0x08, 0x0, HDA_OUTPUT),
+	HDA_BIND_MUTE("Front Playback Switch", 0x08, 2, HDA_INPUT),
+	HDA_CODEC_VOLUME("Headphone Playback Volume", 0x09, 0x0, HDA_OUTPUT),
+	HDA_BIND_MUTE("Headphone Playback Switch", 0x09, 2, HDA_INPUT),
+	HDA_CODEC_VOLUME_MONO("Speaker Playback Volume", 0x0a, 1, 0x0,
+			      HDA_OUTPUT),
+	HDA_BIND_MUTE_MONO("Speaker Playback Switch", 0x0a, 1, 2, HDA_INPUT),
+	{ } /* end */
+};
+
+static const struct hda_verb alc260_hp_unsol_verbs[] = {
+	{0x10, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | ALC_HP_EVENT},
+	{},
+};
+
+static void alc260_hp_setup(struct hda_codec *codec)
+{
+	struct alc_spec *spec = codec->spec;
+
+	spec->autocfg.hp_pins[0] = 0x0f;
+	spec->autocfg.speaker_pins[0] = 0x10;
+	spec->autocfg.speaker_pins[1] = 0x11;
+	spec->automute = 1;
+	spec->automute_mode = ALC_AUTOMUTE_PIN;
+}
+
+static const struct snd_kcontrol_new alc260_hp_3013_mixer[] = {
+	{
+		.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+		.name = "Master Playback Switch",
+		.subdevice = HDA_SUBDEV_NID_FLAG | 0x11,
+		.info = snd_ctl_boolean_mono_info,
+		.get = alc260_hp_master_sw_get,
+		.put = alc260_hp_master_sw_put,
+	},
+	HDA_CODEC_VOLUME("Front Playback Volume", 0x09, 0x0, HDA_OUTPUT),
+	HDA_CODEC_MUTE("Front Playback Switch", 0x10, 0x0, HDA_OUTPUT),
+	HDA_CODEC_VOLUME("Aux-In Playback Volume", 0x07, 0x06, HDA_INPUT),
+	HDA_CODEC_MUTE("Aux-In Playback Switch", 0x07, 0x06, HDA_INPUT),
+	HDA_CODEC_VOLUME("Headphone Playback Volume", 0x08, 0x0, HDA_OUTPUT),
+	HDA_CODEC_MUTE("Headphone Playback Switch", 0x15, 0x0, HDA_OUTPUT),
+	HDA_CODEC_VOLUME_MONO("Speaker Playback Volume", 0x0a, 1, 0x0, HDA_OUTPUT),
+	HDA_CODEC_MUTE_MONO("Speaker Playback Switch", 0x11, 1, 0x0, HDA_OUTPUT),
+	{ } /* end */
+};
+
+static void alc260_hp_3013_setup(struct hda_codec *codec)
+{
+	struct alc_spec *spec = codec->spec;
+
+	spec->autocfg.hp_pins[0] = 0x15;
+	spec->autocfg.speaker_pins[0] = 0x10;
+	spec->autocfg.speaker_pins[1] = 0x11;
+	spec->automute = 1;
+	spec->automute_mode = ALC_AUTOMUTE_PIN;
+}
+
+static const struct hda_bind_ctls alc260_dc7600_bind_master_vol = {
+	.ops = &snd_hda_bind_vol,
+	.values = {
+		HDA_COMPOSE_AMP_VAL(0x08, 3, 0, HDA_OUTPUT),
+		HDA_COMPOSE_AMP_VAL(0x09, 3, 0, HDA_OUTPUT),
+		HDA_COMPOSE_AMP_VAL(0x0a, 3, 0, HDA_OUTPUT),
+		0
+	},
+};
+
+static const struct hda_bind_ctls alc260_dc7600_bind_switch = {
+	.ops = &snd_hda_bind_sw,
+	.values = {
+		HDA_COMPOSE_AMP_VAL(0x11, 3, 0, HDA_OUTPUT),
+		HDA_COMPOSE_AMP_VAL(0x15, 3, 0, HDA_OUTPUT),
+		0
+	},
+};
+
+static const struct snd_kcontrol_new alc260_hp_dc7600_mixer[] = {
+	HDA_BIND_VOL("Master Playback Volume", &alc260_dc7600_bind_master_vol),
+	HDA_BIND_SW("LineOut Playback Switch", &alc260_dc7600_bind_switch),
+	HDA_CODEC_MUTE("Speaker Playback Switch", 0x0f, 0x0, HDA_OUTPUT),
+	HDA_CODEC_MUTE("Headphone Playback Switch", 0x10, 0x0, HDA_OUTPUT),
+	{ } /* end */
+};
+
+static const struct hda_verb alc260_hp_3013_unsol_verbs[] = {
+	{0x15, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | ALC_HP_EVENT},
+	{},
+};
+
+static void alc260_hp_3012_setup(struct hda_codec *codec)
+{
+	struct alc_spec *spec = codec->spec;
+
+	spec->autocfg.hp_pins[0] = 0x10;
+	spec->autocfg.speaker_pins[0] = 0x0f;
+	spec->autocfg.speaker_pins[1] = 0x11;
+	spec->autocfg.speaker_pins[2] = 0x15;
+	spec->automute = 1;
+	spec->automute_mode = ALC_AUTOMUTE_PIN;
+}
+
+/* Fujitsu S702x series laptops.  ALC260 pin usage: Mic/Line jack = 0x12,
+ * HP jack = 0x14, CD audio =  0x16, internal speaker = 0x10.
+ */
+static const struct snd_kcontrol_new alc260_fujitsu_mixer[] = {
+	HDA_CODEC_VOLUME("Headphone Playback Volume", 0x08, 0x0, HDA_OUTPUT),
+	HDA_BIND_MUTE("Headphone Playback Switch", 0x08, 2, HDA_INPUT),
+	ALC_PIN_MODE("Headphone Jack Mode", 0x14, ALC_PIN_DIR_INOUT),
+	HDA_CODEC_VOLUME("CD Playback Volume", 0x07, 0x04, HDA_INPUT),
+	HDA_CODEC_MUTE("CD Playback Switch", 0x07, 0x04, HDA_INPUT),
+	HDA_CODEC_VOLUME("Mic/Line Playback Volume", 0x07, 0x0, HDA_INPUT),
+	HDA_CODEC_MUTE("Mic/Line Playback Switch", 0x07, 0x0, HDA_INPUT),
+	ALC_PIN_MODE("Mic/Line Jack Mode", 0x12, ALC_PIN_DIR_IN),
+	HDA_CODEC_VOLUME("Speaker Playback Volume", 0x09, 0x0, HDA_OUTPUT),
+	HDA_BIND_MUTE("Speaker Playback Switch", 0x09, 2, HDA_INPUT),
+	{ } /* end */
+};
+
+/* Mixer for Acer TravelMate(/Extensa/Aspire) notebooks.  Note that current
+ * versions of the ALC260 don't act on requests to enable mic bias from NID
+ * 0x0f (used to drive the headphone jack in these laptops).  The ALC260
+ * datasheet doesn't mention this restriction.  At this stage it's not clear
+ * whether this behaviour is intentional or is a hardware bug in chip
+ * revisions available in early 2006.  Therefore for now allow the
+ * "Headphone Jack Mode" control to span all choices, but if it turns out
+ * that the lack of mic bias for this NID is intentional we could change the
+ * mode from ALC_PIN_DIR_INOUT to ALC_PIN_DIR_INOUT_NOMICBIAS.
+ *
+ * In addition, Acer TravelMate(/Extensa/Aspire) notebooks in early 2006
+ * don't appear to make the mic bias available from the "line" jack, even
+ * though the NID used for this jack (0x14) can supply it.  The theory is
+ * that perhaps Acer have included blocking capacitors between the ALC260
+ * and the output jack.  If this turns out to be the case for all such
+ * models the "Line Jack Mode" mode could be changed from ALC_PIN_DIR_INOUT
+ * to ALC_PIN_DIR_INOUT_NOMICBIAS.
+ *
+ * The C20x Tablet series have a mono internal speaker which is controlled
+ * via the chip's Mono sum widget and pin complex, so include the necessary
+ * controls for such models.  On models without a "mono speaker" the control
+ * won't do anything.
+ */
+static const struct snd_kcontrol_new alc260_acer_mixer[] = {
+	HDA_CODEC_VOLUME("Master Playback Volume", 0x08, 0x0, HDA_OUTPUT),
+	HDA_BIND_MUTE("Master Playback Switch", 0x08, 2, HDA_INPUT),
+	ALC_PIN_MODE("Headphone Jack Mode", 0x0f, ALC_PIN_DIR_INOUT),
+	HDA_CODEC_VOLUME_MONO("Speaker Playback Volume", 0x0a, 1, 0x0,
+			      HDA_OUTPUT),
+	HDA_BIND_MUTE_MONO("Speaker Playback Switch", 0x0a, 1, 2,
+			   HDA_INPUT),
+	HDA_CODEC_VOLUME("CD Playback Volume", 0x07, 0x04, HDA_INPUT),
+	HDA_CODEC_MUTE("CD Playback Switch", 0x07, 0x04, HDA_INPUT),
+	HDA_CODEC_VOLUME("Mic Playback Volume", 0x07, 0x0, HDA_INPUT),
+	HDA_CODEC_MUTE("Mic Playback Switch", 0x07, 0x0, HDA_INPUT),
+	ALC_PIN_MODE("Mic Jack Mode", 0x12, ALC_PIN_DIR_IN),
+	HDA_CODEC_VOLUME("Line Playback Volume", 0x07, 0x02, HDA_INPUT),
+	HDA_CODEC_MUTE("Line Playback Switch", 0x07, 0x02, HDA_INPUT),
+	ALC_PIN_MODE("Line Jack Mode", 0x14, ALC_PIN_DIR_INOUT),
+	{ } /* end */
+};
+
+/* Maxdata Favorit 100XS: one output and one input (0x12) jack
+ */
+static const struct snd_kcontrol_new alc260_favorit100_mixer[] = {
+	HDA_CODEC_VOLUME("Master Playback Volume", 0x08, 0x0, HDA_OUTPUT),
+	HDA_BIND_MUTE("Master Playback Switch", 0x08, 2, HDA_INPUT),
+	ALC_PIN_MODE("Output Jack Mode", 0x0f, ALC_PIN_DIR_INOUT),
+	HDA_CODEC_VOLUME("Line/Mic Playback Volume", 0x07, 0x0, HDA_INPUT),
+	HDA_CODEC_MUTE("Line/Mic Playback Switch", 0x07, 0x0, HDA_INPUT),
+	ALC_PIN_MODE("Line/Mic Jack Mode", 0x12, ALC_PIN_DIR_IN),
+	{ } /* end */
+};
+
+/* Packard bell V7900  ALC260 pin usage: HP = 0x0f, Mic jack = 0x12,
+ * Line In jack = 0x14, CD audio =  0x16, pc beep = 0x17.
+ */
+static const struct snd_kcontrol_new alc260_will_mixer[] = {
+	HDA_CODEC_VOLUME("Master Playback Volume", 0x08, 0x0, HDA_OUTPUT),
+	HDA_BIND_MUTE("Master Playback Switch", 0x08, 0x2, HDA_INPUT),
+	HDA_CODEC_VOLUME("Mic Playback Volume", 0x07, 0x0, HDA_INPUT),
+	HDA_CODEC_MUTE("Mic Playback Switch", 0x07, 0x0, HDA_INPUT),
+	ALC_PIN_MODE("Mic Jack Mode", 0x12, ALC_PIN_DIR_IN),
+	HDA_CODEC_VOLUME("Line Playback Volume", 0x07, 0x02, HDA_INPUT),
+	HDA_CODEC_MUTE("Line Playback Switch", 0x07, 0x02, HDA_INPUT),
+	ALC_PIN_MODE("Line Jack Mode", 0x14, ALC_PIN_DIR_INOUT),
+	HDA_CODEC_VOLUME("CD Playback Volume", 0x07, 0x04, HDA_INPUT),
+	HDA_CODEC_MUTE("CD Playback Switch", 0x07, 0x04, HDA_INPUT),
+	{ } /* end */
+};
+
+/* Replacer 672V ALC260 pin usage: Mic jack = 0x12,
+ * Line In jack = 0x14, ATAPI Mic = 0x13, speaker = 0x0f.
+ */
+static const struct snd_kcontrol_new alc260_replacer_672v_mixer[] = {
+	HDA_CODEC_VOLUME("Master Playback Volume", 0x08, 0x0, HDA_OUTPUT),
+	HDA_BIND_MUTE("Master Playback Switch", 0x08, 0x2, HDA_INPUT),
+	HDA_CODEC_VOLUME("Mic Playback Volume", 0x07, 0x0, HDA_INPUT),
+	HDA_CODEC_MUTE("Mic Playback Switch", 0x07, 0x0, HDA_INPUT),
+	ALC_PIN_MODE("Mic Jack Mode", 0x12, ALC_PIN_DIR_IN),
+	HDA_CODEC_VOLUME("ATAPI Mic Playback Volume", 0x07, 0x1, HDA_INPUT),
+	HDA_CODEC_MUTE("ATATI Mic Playback Switch", 0x07, 0x1, HDA_INPUT),
+	HDA_CODEC_VOLUME("Line Playback Volume", 0x07, 0x02, HDA_INPUT),
+	HDA_CODEC_MUTE("Line Playback Switch", 0x07, 0x02, HDA_INPUT),
+	ALC_PIN_MODE("Line Jack Mode", 0x14, ALC_PIN_DIR_INOUT),
+	{ } /* end */
+};
+
+/*
+ * initialization verbs
+ */
+static const struct hda_verb alc260_init_verbs[] = {
+	/* Line In pin widget for input */
+	{0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
+	/* CD pin widget for input */
+	{0x16, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
+	/* Mic1 (rear panel) pin widget for input and vref at 80% */
+	{0x12, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80},
+	/* Mic2 (front panel) pin widget for input and vref at 80% */
+	{0x13, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80},
+	/* LINE-2 is used for line-out in rear */
+	{0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
+	/* select line-out */
+	{0x0e, AC_VERB_SET_CONNECT_SEL, 0x00},
+	/* LINE-OUT pin */
+	{0x0f, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
+	/* enable HP */
+	{0x10, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP},
+	/* enable Mono */
+	{0x11, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
+	/* mute capture amp left and right */
+	{0x04, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
+	/* set connection select to line in (default select for this ADC) */
+	{0x04, AC_VERB_SET_CONNECT_SEL, 0x02},
+	/* mute capture amp left and right */
+	{0x05, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
+	/* set connection select to line in (default select for this ADC) */
+	{0x05, AC_VERB_SET_CONNECT_SEL, 0x02},
+	/* set vol=0 Line-Out mixer amp left and right */
+	{0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
+	/* unmute pin widget amp left and right (no gain on this amp) */
+	{0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
+	/* set vol=0 HP mixer amp left and right */
+	{0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
+	/* unmute pin widget amp left and right (no gain on this amp) */
+	{0x10, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
+	/* set vol=0 Mono mixer amp left and right */
+	{0x0a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
+	/* unmute pin widget amp left and right (no gain on this amp) */
+	{0x11, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
+	/* unmute LINE-2 out pin */
+	{0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
+	/* Amp Indexes: CD = 0x04, Line In 1 = 0x02, Mic 1 = 0x00 &
+	 * Line In 2 = 0x03
+	 */
+	/* mute analog inputs */
+	{0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
+	{0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
+	{0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(2)},
+	{0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(3)},
+	{0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(4)},
+	/* Amp Indexes: DAC = 0x01 & mixer = 0x00 */
+	/* mute Front out path */
+	{0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
+	{0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
+	/* mute Headphone out path */
+	{0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
+	{0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
+	/* mute Mono out path */
+	{0x0a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
+	{0x0a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
+	{ }
+};
+
+#if 0 /* should be identical with alc260_init_verbs? */
+static const struct hda_verb alc260_hp_init_verbs[] = {
+	/* Headphone and output */
+	{0x10, AC_VERB_SET_PIN_WIDGET_CONTROL, 0xc0},
+	/* mono output */
+	{0x11, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x40},
+	/* Mic1 (rear panel) pin widget for input and vref at 80% */
+	{0x12, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x24},
+	/* Mic2 (front panel) pin widget for input and vref at 80% */
+	{0x13, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x24},
+	/* Line In pin widget for input */
+	{0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x20},
+	/* Line-2 pin widget for output */
+	{0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x40},
+	/* CD pin widget for input */
+	{0x16, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x20},
+	/* unmute amp left and right */
+	{0x04, AC_VERB_SET_AMP_GAIN_MUTE, 0x7000},
+	/* set connection select to line in (default select for this ADC) */
+	{0x04, AC_VERB_SET_CONNECT_SEL, 0x02},
+	/* unmute Line-Out mixer amp left and right (volume = 0) */
+	{0x08, AC_VERB_SET_AMP_GAIN_MUTE, 0xb000},
+	/* mute pin widget amp left and right (no gain on this amp) */
+	{0x15, AC_VERB_SET_AMP_GAIN_MUTE, 0x0000},
+	/* unmute HP mixer amp left and right (volume = 0) */
+	{0x09, AC_VERB_SET_AMP_GAIN_MUTE, 0xb000},
+	/* mute pin widget amp left and right (no gain on this amp) */
+	{0x10, AC_VERB_SET_AMP_GAIN_MUTE, 0x0000},
+	/* Amp Indexes: CD = 0x04, Line In 1 = 0x02, Mic 1 = 0x00 &
+	 * Line In 2 = 0x03
+	 */
+	/* mute analog inputs */
+	{0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
+	{0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
+	{0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(2)},
+	{0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(3)},
+	{0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(4)},
+	/* Amp Indexes: DAC = 0x01 & mixer = 0x00 */
+	/* Unmute Front out path */
+	{0x08, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x00 << 8))},
+	{0x08, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x01 << 8))},
+	/* Unmute Headphone out path */
+	{0x09, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x00 << 8))},
+	{0x09, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x01 << 8))},
+	/* Unmute Mono out path */
+	{0x0a, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x00 << 8))},
+	{0x0a, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x01 << 8))},
+	{ }
+};
+#endif
+
+static const struct hda_verb alc260_hp_3013_init_verbs[] = {
+	/* Line out and output */
+	{0x10, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x40},
+	/* mono output */
+	{0x11, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x40},
+	/* Mic1 (rear panel) pin widget for input and vref at 80% */
+	{0x12, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x24},
+	/* Mic2 (front panel) pin widget for input and vref at 80% */
+	{0x13, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x24},
+	/* Line In pin widget for input */
+	{0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x20},
+	/* Headphone pin widget for output */
+	{0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, 0xc0},
+	/* CD pin widget for input */
+	{0x16, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x20},
+	/* unmute amp left and right */
+	{0x04, AC_VERB_SET_AMP_GAIN_MUTE, 0x7000},
+	/* set connection select to line in (default select for this ADC) */
+	{0x04, AC_VERB_SET_CONNECT_SEL, 0x02},
+	/* unmute Line-Out mixer amp left and right (volume = 0) */
+	{0x08, AC_VERB_SET_AMP_GAIN_MUTE, 0xb000},
+	/* mute pin widget amp left and right (no gain on this amp) */
+	{0x15, AC_VERB_SET_AMP_GAIN_MUTE, 0x0000},
+	/* unmute HP mixer amp left and right (volume = 0) */
+	{0x09, AC_VERB_SET_AMP_GAIN_MUTE, 0xb000},
+	/* mute pin widget amp left and right (no gain on this amp) */
+	{0x10, AC_VERB_SET_AMP_GAIN_MUTE, 0x0000},
+	/* Amp Indexes: CD = 0x04, Line In 1 = 0x02, Mic 1 = 0x00 &
+	 * Line In 2 = 0x03
+	 */
+	/* mute analog inputs */
+	{0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
+	{0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
+	{0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(2)},
+	{0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(3)},
+	{0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(4)},
+	/* Amp Indexes: DAC = 0x01 & mixer = 0x00 */
+	/* Unmute Front out path */
+	{0x08, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x00 << 8))},
+	{0x08, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x01 << 8))},
+	/* Unmute Headphone out path */
+	{0x09, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x00 << 8))},
+	{0x09, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x01 << 8))},
+	/* Unmute Mono out path */
+	{0x0a, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x00 << 8))},
+	{0x0a, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x01 << 8))},
+	{ }
+};
+
+/* Initialisation sequence for ALC260 as configured in Fujitsu S702x
+ * laptops.  ALC260 pin usage: Mic/Line jack = 0x12, HP jack = 0x14, CD
+ * audio = 0x16, internal speaker = 0x10.
+ */
+static const struct hda_verb alc260_fujitsu_init_verbs[] = {
+	/* Disable all GPIOs */
+	{0x01, AC_VERB_SET_GPIO_MASK, 0},
+	/* Internal speaker is connected to headphone pin */
+	{0x10, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP},
+	/* Headphone/Line-out jack connects to Line1 pin; make it an output */
+	{0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
+	/* Mic/Line-in jack is connected to mic1 pin, so make it an input */
+	{0x12, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
+	/* Ensure all other unused pins are disabled and muted. */
+	{0x0f, AC_VERB_SET_PIN_WIDGET_CONTROL, 0},
+	{0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
+	{0x11, AC_VERB_SET_PIN_WIDGET_CONTROL, 0},
+	{0x11, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
+	{0x13, AC_VERB_SET_PIN_WIDGET_CONTROL, 0},
+	{0x13, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
+	{0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, 0},
+	{0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
+
+	/* Disable digital (SPDIF) pins */
+	{0x03, AC_VERB_SET_DIGI_CONVERT_1, 0},
+	{0x06, AC_VERB_SET_DIGI_CONVERT_1, 0},
+
+	/* Ensure Line1 pin widget takes its input from the OUT1 sum bus
+	 * when acting as an output.
+	 */
+	{0x0d, AC_VERB_SET_CONNECT_SEL, 0},
+
+	/* Start with output sum widgets muted and their output gains at min */
+	{0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
+	{0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
+	{0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
+	{0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
+	{0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
+	{0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
+	{0x0a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
+	{0x0a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
+	{0x0a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
+
+	/* Unmute HP pin widget amp left and right (no equiv mixer ctrl) */
+	{0x10, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
+	/* Unmute Line1 pin widget output buffer since it starts as an output.
+	 * If the pin mode is changed by the user the pin mode control will
+	 * take care of enabling the pin's input/output buffers as needed.
+	 * Therefore there's no need to enable the input buffer at this
+	 * stage.
+	 */
+	{0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
+	/* Unmute input buffer of pin widget used for Line-in (no equiv
+	 * mixer ctrl)
+	 */
+	{0x12, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
+
+	/* Mute capture amp left and right */
+	{0x04, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
+	/* Set ADC connection select to match default mixer setting - line
+	 * in (on mic1 pin)
+	 */
+	{0x04, AC_VERB_SET_CONNECT_SEL, 0x00},
+
+	/* Do the same for the second ADC: mute capture input amp and
+	 * set ADC connection to line in (on mic1 pin)
+	 */
+	{0x05, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
+	{0x05, AC_VERB_SET_CONNECT_SEL, 0x00},
+
+	/* Mute all inputs to mixer widget (even unconnected ones) */
+	{0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, /* mic1 pin */
+	{0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)}, /* mic2 pin */
+	{0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(2)}, /* line1 pin */
+	{0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(3)}, /* line2 pin */
+	{0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(4)}, /* CD pin */
+	{0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(5)}, /* Beep-gen pin */
+	{0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(6)}, /* Line-out pin */
+	{0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(7)}, /* HP-pin pin */
+
+	{ }
+};
+
+/* Initialisation sequence for ALC260 as configured in Acer TravelMate and
+ * similar laptops (adapted from Fujitsu init verbs).
+ */
+static const struct hda_verb alc260_acer_init_verbs[] = {
+	/* On TravelMate laptops, GPIO 0 enables the internal speaker and
+	 * the headphone jack.  Turn this on and rely on the standard mute
+	 * methods whenever the user wants to turn these outputs off.
+	 */
+	{0x01, AC_VERB_SET_GPIO_MASK, 0x01},
+	{0x01, AC_VERB_SET_GPIO_DIRECTION, 0x01},
+	{0x01, AC_VERB_SET_GPIO_DATA, 0x01},
+	/* Internal speaker/Headphone jack is connected to Line-out pin */
+	{0x0f, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP},
+	/* Internal microphone/Mic jack is connected to Mic1 pin */
+	{0x12, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF50},
+	/* Line In jack is connected to Line1 pin */
+	{0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
+	/* Some Acers (eg: C20x Tablets) use Mono pin for internal speaker */
+	{0x11, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP},
+