ALSA: usb/6fire - Driver for TerraTec DMX 6Fire USB

What is working: Everything except SPDIF
- Hardware Master volume
- PCM 44-192kHz@24 bits, 6 channels out, 4 channels in (analog)
- MIDI in/out
- firmware loading after cold start
- phono/line switching

Signed-off-by: Torsten Schenk <torsten.schenk@zoho.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

14 files changed, 2296 insertions, 0 deletions

diff --git a/sound/usb/6fire/Makefile b/sound/usb/6fire/Makefile
new file mode 100644
index 00000000000..dfce6ec5351
--- /dev/null
+++ b/sound/usb/6fire/Makefile
@@ -0,0 +1,3 @@
+snd-usb-6fire-objs += chip.o comm.o midi.o control.o firmware.o pcm.o
+obj-$(CONFIG_SND_USB_6FIRE) += snd-usb-6fire.o
+
diff --git a/sound/usb/6fire/chip.c b/sound/usb/6fire/chip.c
new file mode 100644
index 00000000000..c7dca7b0b9f
--- /dev/null
+++ b/sound/usb/6fire/chip.c
@@ -0,0 +1,232 @@
+/*
+ * Linux driver for TerraTec DMX 6Fire USB
+ *
+ * Main routines and module definitions.
+ *
+ * Author:	Torsten Schenk <torsten.schenk@zoho.com>
+ * Created:	Jan 01, 2011
+ * Version:	0.3.0
+ * Copyright:	(C) Torsten Schenk
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include "chip.h"
+#include "firmware.h"
+#include "pcm.h"
+#include "control.h"
+#include "comm.h"
+#include "midi.h"
+
+#include <linux/moduleparam.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/gfp.h>
+#include <sound/initval.h>
+
+MODULE_AUTHOR("Torsten Schenk <torsten.schenk@zoho.com>");
+MODULE_DESCRIPTION("TerraTec DMX 6Fire USB audio driver, version 0.3.0");
+MODULE_LICENSE("GPL v2");
+MODULE_SUPPORTED_DEVICE("{{TerraTec, DMX 6Fire USB}}");
+
+static int index[SNDRV_CARDS] = SNDRV_DEFAULT_IDX; /* Index 0-max */
+static char *id[SNDRV_CARDS] = SNDRV_DEFAULT_STR; /* Id for card */
+static int enable[SNDRV_CARDS] = SNDRV_DEFAULT_ENABLE_PNP; /* Enable card */
+static struct sfire_chip *chips[SNDRV_CARDS] = SNDRV_DEFAULT_PTR;
+static struct usb_device *devices[SNDRV_CARDS] = SNDRV_DEFAULT_PTR;
+
+module_param_array(index, int, NULL, 0444);
+MODULE_PARM_DESC(index, "Index value for the 6fire sound device");
+module_param_array(id, charp, NULL, 0444);
+MODULE_PARM_DESC(id, "ID string for the 6fire sound device.");
+module_param_array(enable, bool, NULL, 0444);
+MODULE_PARM_DESC(enable, "Enable the 6fire sound device.");
+
+static DEFINE_MUTEX(register_mutex);
+
+static void usb6fire_chip_abort(struct sfire_chip *chip)
+{
+	if (chip) {
+		if (chip->pcm)
+			usb6fire_pcm_abort(chip);
+		if (chip->midi)
+			usb6fire_midi_abort(chip);
+		if (chip->comm)
+			usb6fire_comm_abort(chip);
+		if (chip->control)
+			usb6fire_control_abort(chip);
+		if (chip->card) {
+			snd_card_disconnect(chip->card);
+			snd_card_free_when_closed(chip->card);
+			chip->card = NULL;
+		}
+	}
+}
+
+static void usb6fire_chip_destroy(struct sfire_chip *chip)
+{
+	if (chip) {
+		if (chip->pcm)
+			usb6fire_pcm_destroy(chip);
+		if (chip->midi)
+			usb6fire_midi_destroy(chip);
+		if (chip->comm)
+			usb6fire_comm_destroy(chip);
+		if (chip->control)
+			usb6fire_control_destroy(chip);
+		if (chip->card)
+			snd_card_free(chip->card);
+	}
+}
+
+static int __devinit usb6fire_chip_probe(struct usb_interface *intf,
+		const struct usb_device_id *usb_id)
+{
+	int ret;
+	int i;
+	struct sfire_chip *chip = NULL;
+	struct usb_device *device = interface_to_usbdev(intf);
+	int regidx = -1; /* index in module parameter array */
+	struct snd_card *card = NULL;
+
+	/* look if we already serve this card and return if so */
+	mutex_lock(&register_mutex);
+	for (i = 0; i < SNDRV_CARDS; i++) {
+		if (devices[i] == device) {
+			if (chips[i])
+				chips[i]->intf_count++;
+			usb_set_intfdata(intf, chips[i]);
+			mutex_unlock(&register_mutex);
+			return 0;
+		} else if (regidx < 0)
+			regidx = i;
+	}
+	if (regidx < 0) {
+		mutex_unlock(&register_mutex);
+		snd_printk(KERN_ERR PREFIX "too many cards registered.\n");
+		return -ENODEV;
+	}
+	devices[regidx] = device;
+	mutex_unlock(&register_mutex);
+
+	/* check, if firmware is present on device, upload it if not */
+	ret = usb6fire_fw_init(intf);
+	if (ret < 0)
+		return ret;
+	else if (ret == FW_NOT_READY) /* firmware update performed */
+		return 0;
+
+	/* if we are here, card can be registered in alsa. */
+	if (usb_set_interface(device, 0, 0) != 0) {
+		snd_printk(KERN_ERR PREFIX "can't set first interface.\n");
+		return -EIO;
+	}
+	ret = snd_card_create(index[regidx], id[regidx], THIS_MODULE,
+			sizeof(struct sfire_chip), &card);
+	if (ret < 0) {
+		snd_printk(KERN_ERR PREFIX "cannot create alsa card.\n");
+		return ret;
+	}
+	strcpy(card->driver, "6FireUSB");
+	strcpy(card->shortname, "TerraTec DMX6FireUSB");
+	sprintf(card->longname, "%s at %d:%d", card->shortname,
+			device->bus->busnum, device->devnum);
+	snd_card_set_dev(card, &intf->dev);
+
+	chip = card->private_data;
+	chips[regidx] = chip;
+	chip->dev = device;
+	chip->regidx = regidx;
+	chip->intf_count = 1;
+	chip->card = card;
+
+	ret = usb6fire_comm_init(chip);
+	if (ret < 0) {
+		usb6fire_chip_destroy(chip);
+		return ret;
+	}
+
+	ret = usb6fire_midi_init(chip);
+	if (ret < 0) {
+		usb6fire_chip_destroy(chip);
+		return ret;
+	}
+
+	ret = usb6fire_pcm_init(chip);
+	if (ret < 0) {
+		usb6fire_chip_destroy(chip);
+		return ret;
+	}
+
+	ret = usb6fire_control_init(chip);
+	if (ret < 0) {
+		usb6fire_chip_destroy(chip);
+		return ret;
+	}
+
+	ret = snd_card_register(card);
+	if (ret < 0) {
+		snd_printk(KERN_ERR PREFIX "cannot register card.");
+		usb6fire_chip_destroy(chip);
+		return ret;
+	}
+	usb_set_intfdata(intf, chip);
+	return 0;
+}
+
+static void usb6fire_chip_disconnect(struct usb_interface *intf)
+{
+	struct sfire_chip *chip;
+	struct snd_card *card;
+
+	chip = usb_get_intfdata(intf);
+	if (chip) { /* if !chip, fw upload has been performed */
+		card = chip->card;
+		chip->intf_count--;
+		if (!chip->intf_count) {
+			mutex_lock(&register_mutex);
+			devices[chip->regidx] = NULL;
+			chips[chip->regidx] = NULL;
+			mutex_unlock(&register_mutex);
+
+			chip->shutdown = true;
+			usb6fire_chip_abort(chip);
+			usb6fire_chip_destroy(chip);
+		}
+	}
+}
+
+static struct usb_device_id device_table[] = {
+	{
+		.match_flags = USB_DEVICE_ID_MATCH_DEVICE,
+		.idVendor = 0x0ccd,
+		.idProduct = 0x0080
+	},
+	{}
+};
+
+MODULE_DEVICE_TABLE(usb, device_table);
+
+static struct usb_driver driver = {
+	.name = "snd-usb-6fire",
+	.probe = usb6fire_chip_probe,
+	.disconnect = usb6fire_chip_disconnect,
+	.id_table = device_table,
+};
+
+static int __init usb6fire_chip_init(void)
+{
+	return usb_register(&driver);
+}
+
+static void __exit usb6fire_chip_cleanup(void)
+{
+	usb_deregister(&driver);
+}
+
+module_init(usb6fire_chip_init);
+module_exit(usb6fire_chip_cleanup);
diff --git a/sound/usb/6fire/chip.h b/sound/usb/6fire/chip.h
new file mode 100644
index 00000000000..d11e5cb520f
--- /dev/null
+++ b/sound/usb/6fire/chip.h
@@ -0,0 +1,32 @@
+/*
+ * Linux driver for TerraTec DMX 6Fire USB
+ *
+ * Author:	Torsten Schenk <torsten.schenk@zoho.com>
+ * Created:	Jan 01, 2011
+ * Version:	0.3.0
+ * Copyright:	(C) Torsten Schenk
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+#ifndef USB6FIRE_CHIP_H
+#define USB6FIRE_CHIP_H
+
+#include "common.h"
+
+struct sfire_chip {
+	struct usb_device *dev;
+	struct snd_card *card;
+	int intf_count; /* number of registered interfaces */
+	int regidx; /* index in module parameter arrays */
+	bool shutdown;
+
+	struct midi_runtime *midi;
+	struct pcm_runtime *pcm;
+	struct control_runtime *control;
+	struct comm_runtime *comm;
+};
+#endif /* USB6FIRE_CHIP_H */
+
diff --git a/sound/usb/6fire/comm.c b/sound/usb/6fire/comm.c
new file mode 100644
index 00000000000..c994daa57af
--- /dev/null
+++ b/sound/usb/6fire/comm.c
@@ -0,0 +1,176 @@
+/*
+ * Linux driver for TerraTec DMX 6Fire USB
+ *
+ * Device communications
+ *
+ * Author:	Torsten Schenk <torsten.schenk@zoho.com>
+ * Created:	Jan 01, 2011
+ * Version:	0.3.0
+ * Copyright:	(C) Torsten Schenk
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include "comm.h"
+#include "chip.h"
+#include "midi.h"
+
+enum {
+	COMM_EP = 1,
+	COMM_FPGA_EP = 2
+};
+
+static void usb6fire_comm_init_urb(struct comm_runtime *rt, struct urb *urb,
+		u8 *buffer, void *context, void(*handler)(struct urb *urb))
+{
+	usb_init_urb(urb);
+	urb->transfer_buffer = buffer;
+	urb->pipe = usb_sndintpipe(rt->chip->dev, COMM_EP);
+	urb->complete = handler;
+	urb->context = context;
+	urb->interval = 1;
+	urb->dev = rt->chip->dev;
+}
+
+static void usb6fire_comm_receiver_handler(struct urb *urb)
+{
+	struct comm_runtime *rt = urb->context;
+	struct midi_runtime *midi_rt = rt->chip->midi;
+
+	if (!urb->status) {
+		if (rt->receiver_buffer[0] == 0x10) /* midi in event */
+			if (midi_rt)
+				midi_rt->in_received(midi_rt,
+						rt->receiver_buffer + 2,
+						rt->receiver_buffer[1]);
+	}
+
+	if (!rt->chip->shutdown) {
+		urb->status = 0;
+		urb->actual_length = 0;
+		if (usb_submit_urb(urb, GFP_ATOMIC) < 0)
+			snd_printk(KERN_WARNING PREFIX
+					"comm data receiver aborted.\n");
+	}
+}
+
+static void usb6fire_comm_init_buffer(u8 *buffer, u8 id, u8 request,
+		u8 reg, u8 vl, u8 vh)
+{
+	buffer[0] = 0x01;
+	buffer[2] = request;
+	buffer[3] = id;
+	switch (request) {
+	case 0x02:
+		buffer[1] = 0x05; /* length (starting at buffer[2]) */
+		buffer[4] = reg;
+		buffer[5] = vl;
+		buffer[6] = vh;
+		break;
+
+	case 0x12:
+		buffer[1] = 0x0b; /* length (starting at buffer[2]) */
+		buffer[4] = 0x00;
+		buffer[5] = 0x18;
+		buffer[6] = 0x05;
+		buffer[7] = 0x00;
+		buffer[8] = 0x01;
+		buffer[9] = 0x00;
+		buffer[10] = 0x9e;
+		buffer[11] = reg;
+		buffer[12] = vl;
+		break;
+
+	case 0x20:
+	case 0x21:
+	case 0x22:
+		buffer[1] = 0x04;
+		buffer[4] = reg;
+		buffer[5] = vl;
+		break;
+	}
+}
+
+static int usb6fire_comm_send_buffer(u8 *buffer, struct usb_device *dev)
+{
+	int ret;
+	int actual_len;
+
+	ret = usb_interrupt_msg(dev, usb_sndintpipe(dev, COMM_EP),
+			buffer, buffer[1] + 2, &actual_len, HZ);
+	if (ret < 0)
+		return ret;
+	else if (actual_len != buffer[1] + 2)
+		return -EIO;
+	return 0;
+}
+
+static int usb6fire_comm_write8(struct comm_runtime *rt, u8 request,
+		u8 reg, u8 value)
+{
+	u8 buffer[13]; /* 13: maximum length of message */
+
+	usb6fire_comm_init_buffer(buffer, 0x00, request, reg, value, 0x00);
+	return usb6fire_comm_send_buffer(buffer, rt->chip->dev);
+}
+
+static int usb6fire_comm_write16(struct comm_runtime *rt, u8 request,
+		u8 reg, u8 vl, u8 vh)
+{
+	u8 buffer[13]; /* 13: maximum length of message */
+
+	usb6fire_comm_init_buffer(buffer, 0x00, request, reg, vl, vh);
+	return usb6fire_comm_send_buffer(buffer, rt->chip->dev);
+}
+
+int __devinit usb6fire_comm_init(struct sfire_chip *chip)
+{
+	struct comm_runtime *rt = kzalloc(sizeof(struct comm_runtime),
+			GFP_KERNEL);
+	struct urb *urb = &rt->receiver;
+	int ret;
+
+	if (!rt)
+		return -ENOMEM;
+
+	rt->serial = 1;
+	rt->chip = chip;
+	usb_init_urb(urb);
+	rt->init_urb = usb6fire_comm_init_urb;
+	rt->write8 = usb6fire_comm_write8;
+	rt->write16 = usb6fire_comm_write16;
+
+	/* submit an urb that receives communication data from device */
+	urb->transfer_buffer = rt->receiver_buffer;
+	urb->transfer_buffer_length = COMM_RECEIVER_BUFSIZE;
+	urb->pipe = usb_rcvintpipe(chip->dev, COMM_EP);
+	urb->dev = chip->dev;
+	urb->complete = usb6fire_comm_receiver_handler;
+	urb->context = rt;
+	urb->interval = 1;
+	ret = usb_submit_urb(urb, GFP_KERNEL);
+	if (ret < 0) {
+		kfree(rt);
+		snd_printk(KERN_ERR PREFIX "cannot create comm data receiver.");
+		return ret;
+	}
+	chip->comm = rt;
+	return 0;
+}
+
+void usb6fire_comm_abort(struct sfire_chip *chip)
+{
+	struct comm_runtime *rt = chip->comm;
+
+	if (rt)
+		usb_poison_urb(&rt->receiver);
+}
+
+void usb6fire_comm_destroy(struct sfire_chip *chip)
+{
+	kfree(chip->comm);
+	chip->comm = NULL;
+}
diff --git a/sound/usb/6fire/comm.h b/sound/usb/6fire/comm.h
new file mode 100644
index 00000000000..edc5dc84b88
--- /dev/null
+++ b/sound/usb/6fire/comm.h
@@ -0,0 +1,44 @@
+/*
+ * Linux driver for TerraTec DMX 6Fire USB
+ *
+ * Author:	Torsten Schenk <torsten.schenk@zoho.com>
+ * Created:	Jan 01, 2011
+ * Version:	0.3.0
+ * Copyright:	(C) Torsten Schenk
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+#ifndef USB6FIRE_COMM_H
+#define USB6FIRE_COMM_H
+
+#include "common.h"
+
+enum /* settings for comm */
+{
+	COMM_RECEIVER_BUFSIZE = 64,
+};
+
+struct comm_runtime {
+	struct sfire_chip *chip;
+
+	struct urb receiver;
+	u8 receiver_buffer[COMM_RECEIVER_BUFSIZE];
+
+	u8 serial; /* urb serial */
+
+	void (*init_urb)(struct comm_runtime *rt, struct urb *urb, u8 *buffer,
+			void *context, void(*handler)(struct urb *urb));
+	/* writes control data to the device */
+	int (*write8)(struct comm_runtime *rt, u8 request, u8 reg, u8 value);
+	int (*write16)(struct comm_runtime *rt, u8 request, u8 reg,
+			u8 vh, u8 vl);
+};
+
+int __devinit usb6fire_comm_init(struct sfire_chip *chip);
+void usb6fire_comm_abort(struct sfire_chip *chip);
+void usb6fire_comm_destroy(struct sfire_chip *chip);
+#endif /* USB6FIRE_COMM_H */
+
diff --git a/sound/usb/6fire/common.h b/sound/usb/6fire/common.h
new file mode 100644
index 00000000000..7dbeb4a3783
--- /dev/null
+++ b/sound/usb/6fire/common.h
@@ -0,0 +1,30 @@
+/*
+ * Linux driver for TerraTec DMX 6Fire USB
+ *
+ * Author:	Torsten Schenk <torsten.schenk@zoho.com>
+ * Created:	Jan 01, 2011
+ * Version:	0.3.0
+ * Copyright:	(C) Torsten Schenk
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef USB6FIRE_COMMON_H
+#define USB6FIRE_COMMON_H
+
+#include <linux/slab.h>
+#include <linux/usb.h>
+#include <sound/core.h>
+
+#define PREFIX "6fire: "
+
+struct sfire_chip;
+struct midi_runtime;
+struct pcm_runtime;
+struct control_runtime;
+struct comm_runtime;
+#endif /* USB6FIRE_COMMON_H */
+
diff --git a/sound/usb/6fire/control.c b/sound/usb/6fire/control.c
new file mode 100644
index 00000000000..24846351118
--- /dev/null
+++ b/sound/usb/6fire/control.c
@@ -0,0 +1,275 @@
+/*
+ * Linux driver for TerraTec DMX 6Fire USB
+ *
+ * Mixer control
+ *
+ * Author:	Torsten Schenk <torsten.schenk@zoho.com>
+ * Created:	Jan 01, 2011
+ * Version:	0.3.0
+ * Copyright:	(C) Torsten Schenk
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/interrupt.h>
+#include <sound/control.h>
+
+#include "control.h"
+#include "comm.h"
+#include "chip.h"
+
+static char *opt_coax_texts[2] = { "Optical", "Coax" };
+static char *line_phono_texts[2] = { "Line", "Phono" };
+
+/*
+ * calculated with $value\[i\] = 128 \cdot sqrt[3]{\frac{i}{128}}$
+ * this is done because the linear values cause rapid degredation
+ * of volume in the uppermost region.
+ */
+static const u8 log_volume_table[128] = {
+	0x00, 0x19, 0x20, 0x24, 0x28, 0x2b, 0x2e, 0x30, 0x32, 0x34,
+	0x36, 0x38, 0x3a, 0x3b, 0x3d, 0x3e, 0x40, 0x41, 0x42, 0x43,
+	0x44, 0x46, 0x47, 0x48, 0x49, 0x4a, 0x4b, 0x4c, 0x4d, 0x4e,
+	0x4e, 0x4f, 0x50, 0x51, 0x52, 0x53, 0x53, 0x54, 0x55, 0x56,
+	0x56, 0x57, 0x58, 0x58, 0x59, 0x5a, 0x5b, 0x5b, 0x5c, 0x5c,
+	0x5d, 0x5e, 0x5e, 0x5f, 0x60, 0x60, 0x61, 0x61, 0x62, 0x62,
+	0x63, 0x63, 0x64, 0x65, 0x65, 0x66, 0x66, 0x67, 0x67, 0x68,
+	0x68, 0x69, 0x69, 0x6a, 0x6a, 0x6b, 0x6b, 0x6c, 0x6c, 0x6c,
+	0x6d, 0x6d, 0x6e, 0x6e, 0x6f, 0x6f, 0x70, 0x70, 0x70, 0x71,
+	0x71, 0x72, 0x72, 0x73, 0x73, 0x73, 0x74, 0x74, 0x75, 0x75,
+	0x75, 0x76, 0x76, 0x77, 0x77, 0x77, 0x78, 0x78, 0x78, 0x79,
+	0x79, 0x7a, 0x7a, 0x7a, 0x7b, 0x7b, 0x7b, 0x7c, 0x7c, 0x7c,
+	0x7d, 0x7d, 0x7d, 0x7e, 0x7e, 0x7e, 0x7f, 0x7f };
+
+/*
+ * data that needs to be sent to device. sets up card internal stuff.
+ * values dumped from windows driver and filtered by trial'n'error.
+ */
+static const struct {
+	u8 type;
+	u8 reg;
+	u8 value;
+}
+init_data[] = {
+	{ 0x22, 0x00, 0x00 }, { 0x20, 0x00, 0x08 }, { 0x22, 0x01, 0x01 },
+	{ 0x20, 0x01, 0x08 }, { 0x22, 0x02, 0x00 }, { 0x20, 0x02, 0x08 },
+	{ 0x22, 0x03, 0x00 }, { 0x20, 0x03, 0x08 }, { 0x22, 0x04, 0x00 },
+	{ 0x20, 0x04, 0x08 }, { 0x22, 0x05, 0x01 }, { 0x20, 0x05, 0x08 },
+	{ 0x22, 0x04, 0x01 }, { 0x12, 0x04, 0x00 }, { 0x12, 0x05, 0x00 },
+	{ 0x12, 0x0d, 0x78 }, { 0x12, 0x21, 0x82 }, { 0x12, 0x22, 0x80 },
+	{ 0x12, 0x23, 0x00 }, { 0x12, 0x06, 0x02 }, { 0x12, 0x03, 0x00 },
+	{ 0x12, 0x02, 0x00 }, { 0x22, 0x03, 0x01 },
+	{ 0 } /* TERMINATING ENTRY */
+};
+
+static void usb6fire_control_master_vol_update(struct control_runtime *rt)
+{
+	struct comm_runtime *comm_rt = rt->chip->comm;
+	if (comm_rt) {
+		/* set volume */
+		comm_rt->write8(comm_rt, 0x12, 0x0f, 0x7f -
+				log_volume_table[rt->master_vol]);
+		 /* unmute */
+		comm_rt->write8(comm_rt, 0x12, 0x0e, 0x00);
+	}
+}
+
+static void usb6fire_control_line_phono_update(struct control_runtime *rt)
+{
+	struct comm_runtime *comm_rt = rt->chip->comm;
+	if (comm_rt) {
+		comm_rt->write8(comm_rt, 0x22, 0x02, rt->line_phono_switch);
+		comm_rt->write8(comm_rt, 0x21, 0x02, rt->line_phono_switch);
+	}
+}
+
+static void usb6fire_control_opt_coax_update(struct control_runtime *rt)
+{
+	struct comm_runtime *comm_rt = rt->chip->comm;
+	if (comm_rt) {
+		comm_rt->write8(comm_rt, 0x22, 0x00, rt->opt_coax_switch);
+		comm_rt->write8(comm_rt, 0x21, 0x00, rt->opt_coax_switch);
+	}
+}
+
+static int usb6fire_control_master_vol_info(struct snd_kcontrol *kcontrol,
+		struct snd_ctl_elem_info *uinfo)
+{
+	uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
+	uinfo->count = 1;
+	uinfo->value.integer.min = 0;
+	uinfo->value.integer.max = 127;
+	return 0;
+}
+
+static int usb6fire_control_master_vol_put(struct snd_kcontrol *kcontrol,
+		struct snd_ctl_elem_value *ucontrol)
+{
+	struct control_runtime *rt = snd_kcontrol_chip(kcontrol);
+	int changed = 0;
+	if (rt->master_vol != ucontrol->value.integer.value[0]) {
+		rt->master_vol = ucontrol->value.integer.value[0];
+		usb6fire_control_master_vol_update(rt);
+		changed = 1;
+	}
+	return changed;
+}
+
+static int usb6fire_control_master_vol_get(struct snd_kcontrol *kcontrol,
+		struct snd_ctl_elem_value *ucontrol)
+{
+	struct control_runtime *rt = snd_kcontrol_chip(kcontrol);
+	ucontrol->value.integer.value[0] = rt->master_vol;
+	return 0;
+}
+
+static int usb6fire_control_line_phono_info(struct snd_kcontrol *kcontrol,
+		struct snd_ctl_elem_info *uinfo)
+{
+	uinfo->type = SNDRV_CTL_ELEM_TYPE_ENUMERATED;
+	uinfo->count = 1;
+	uinfo->value.enumerated.items = 2;
+	if (uinfo->value.enumerated.item > 1)
+		uinfo->value.enumerated.item = 1;
+	strcpy(uinfo->value.enumerated.name,
+			line_phono_texts[uinfo->value.enumerated.item]);
+	return 0;
+}
+
+static int usb6fire_control_line_phono_put(struct snd_kcontrol *kcontrol,
+		struct snd_ctl_elem_value *ucontrol)
+{
+	struct control_runtime *rt = snd_kcontrol_chip(kcontrol);
+	int changed = 0;
+	if (rt->line_phono_switch != ucontrol->value.integer.value[0]) {
+		rt->line_phono_switch = ucontrol->value.integer.value[0];
+		usb6fire_control_line_phono_update(rt);
+		changed = 1;
+	}
+	return changed;
+}
+
+static int usb6fire_control_line_phono_get(struct snd_kcontrol *kcontrol,
+		struct snd_ctl_elem_value *ucontrol)
+{
+	struct control_runtime *rt = snd_kcontrol_chip(kcontrol);
+	ucontrol->value.integer.value[0] = rt->line_phono_switch;
+	return 0;
+}
+
+static int usb6fire_control_opt_coax_info(struct snd_kcontrol *kcontrol,
+		struct snd_ctl_elem_info *uinfo)
+{
+	uinfo->type = SNDRV_CTL_ELEM_TYPE_ENUMERATED;
+	uinfo->count = 1;
+	uinfo->value.enumerated.items = 2;
+	if (uinfo->value.enumerated.item > 1)
+		uinfo->value.enumerated.item = 1;
+	strcpy(uinfo->value.enumerated.name,
+			opt_coax_texts[uinfo->value.enumerated.item]);
+	return 0;
+}
+
+static int usb6fire_control_opt_coax_put(struct snd_kcontrol *kcontrol,
+		struct snd_ctl_elem_value *ucontrol)
+{
+	struct control_runtime *rt = snd_kcontrol_chip(kcontrol);
+	int changed = 0;
+
+	if (rt->opt_coax_switch != ucontrol->value.enumerated.item[0]) {
+		rt->opt_coax_switch = ucontrol->value.enumerated.item[0];
+		usb6fire_control_opt_coax_update(rt);
+		changed = 1;
+	}
+	return changed;
+}
+
+static int usb6fire_control_opt_coax_get(struct snd_kcontrol *kcontrol,
+		struct snd_ctl_elem_value *ucontrol)
+{
+	struct control_runtime *rt = snd_kcontrol_chip(kcontrol);
+	ucontrol->value.enumerated.item[0] = rt->opt_coax_switch;
+	return 0;
+}
+
+static struct __devinitdata snd_kcontrol_new elements[] = {
+	{
+		.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+		.name = "Master Playback Volume",
+		.index = 0,
+		.access = SNDRV_CTL_ELEM_ACCESS_READWRITE,
+		.info = usb6fire_control_master_vol_info,
+		.get = usb6fire_control_master_vol_get,
+		.put = usb6fire_control_master_vol_put
+	},
+	{
+		.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+		.name = "Line/Phono Capture Route",
+		.index = 0,
+		.access = SNDRV_CTL_ELEM_ACCESS_READWRITE,
+		.info = usb6fire_control_line_phono_info,
+		.get = usb6fire_control_line_phono_get,
+		.put = usb6fire_control_line_phono_put
+	},
+	{
+		.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+		.name = "Opt/Coax Capture Route",
+		.index = 0,
+		.access = SNDRV_CTL_ELEM_ACCESS_READWRITE,
+		.info = usb6fire_control_opt_coax_info,
+		.get = usb6fire_control_opt_coax_get,
+		.put = usb6fire_control_opt_coax_put
+	},
+	{}
+};
+
+int __devinit usb6fire_control_init(struct sfire_chip *chip)
+{
+	int i;
+	int ret;
+	struct control_runtime *rt = kzalloc(sizeof(struct control_runtime),
+			GFP_KERNEL);
+	struct comm_runtime *comm_rt = chip->comm;
+
+	if (!rt)
+		return -ENOMEM;
+
+	rt->chip = chip;
+
+	i = 0;
+	while (init_data[i].type) {
+		comm_rt->write8(comm_rt, init_data[i].type, init_data[i].reg,
+				init_data[i].value);
+		i++;
+	}
+
+	usb6fire_control_opt_coax_update(rt);
+	usb6fire_control_line_phono_update(rt);
+	usb6fire_control_master_vol_update(rt);
+
+	i = 0;
+	while (elements[i].name) {
+		ret = snd_ctl_add(chip->card, snd_ctl_new1(&elements[i], rt));
+		if (ret < 0) {
+			kfree(rt);
+			snd_printk(KERN_ERR PREFIX "cannot add control.\n");
+			return ret;
+		}
+		i++;
+	}
+
+	chip->control = rt;
+	return 0;
+}
+
+void usb6fire_control_abort(struct sfire_chip *chip)
+{}
+
+void usb6fire_control_destroy(struct sfire_chip *chip)
+{
+	kfree(chip->control);
+	chip->control = NULL;
+}
diff --git a/sound/usb/6fire/control.h b/sound/usb/6fire/control.h
new file mode 100644
index 00000000000..b534c777ab0
--- /dev/null
+++ b/sound/usb/6fire/control.h
@@ -0,0 +1,37 @@
+/*
+ * Linux driver for TerraTec DMX 6Fire USB
+ *
+ * Author:	Torsten Schenk <torsten.schenk@zoho.com>
+ * Created:	Jan 01, 2011
+ * Version:	0.3.0
+ * Copyright:	(C) Torsten Schenk
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef USB6FIRE_CONTROL_H
+#define USB6FIRE_CONTROL_H
+
+#include "common.h"
+
+enum {
+	CONTROL_MAX_ELEMENTS = 32
+};
+
+struct control_runtime {
+	struct sfire_chip *chip;
+
+	struct snd_kcontrol *element[CONTROL_MAX_ELEMENTS];
+	bool opt_coax_switch;
+	bool line_phono_switch;
+	u8 master_vol;
+};
+
+int __devinit usb6fire_control_init(struct sfire_chip *chip);
+void usb6fire_control_abort(struct sfire_chip *chip);
+void usb6fire_control_destroy(struct sfire_chip *chip);
+#endif /* USB6FIRE_CONTROL_H */
+
diff --git a/sound/usb/6fire/firmware.c b/sound/usb/6fire/firmware.c
new file mode 100644
index 00000000000..9081a54a9c6
--- /dev/null
+++ b/sound/usb/6fire/firmware.c
@@ -0,0 +1,426 @@
+/*
+ * Linux driver for TerraTec DMX 6Fire USB
+ *
+ * Firmware loader
+ *
+ * Currently not working for all devices. To be able to use the device
+ * in linux, it is also possible to let the windows driver upload the firmware.
+ * For that, start the computer in windows and reboot.
+ * As long as the device is connected to the power supply, no firmware reload
+ * needs to be performed.
+ *
+ * Author:	Torsten Schenk <torsten.schenk@zoho.com>
+ * Created:	Jan 01, 2011
+ * Version:	0.3.0
+ * Copyright:	(C) Torsten Schenk
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/firmware.h>
+
+#include "firmware.h"
+#include "chip.h"
+
+MODULE_FIRMWARE("6fire/dmx6firel2.ihx");
+MODULE_FIRMWARE("6fire/dmx6fireap.ihx");
+MODULE_FIRMWARE("6fire/dmx6firecf.bin");
+
+enum {
+	FPGA_BUFSIZE = 512, FPGA_EP = 2
+};
+
+static const u8 BIT_REVERSE_TABLE[256] = {
+	0x00, 0x80, 0x40, 0xc0, 0x20, 0xa0, 0x60, 0xe0, 0x10, 0x90, 0x50,
+	0xd0, 0x30, 0xb0, 0x70, 0xf0, 0x08, 0x88, 0x48, 0xc8, 0x28, 0xa8,
+	0x68, 0xe8, 0x18, 0x98, 0x58, 0xd8, 0x38, 0xb8, 0x78, 0xf8, 0x04,
+	0x84, 0x44, 0xc4, 0x24, 0xa4, 0x64, 0xe4, 0x14, 0x94, 0x54, 0xd4,
+	0x34, 0xb4, 0x74, 0xf4, 0x0c, 0x8c, 0x4c, 0xcc, 0x2c, 0xac, 0x6c,
+	0xec, 0x1c, 0x9c, 0x5c, 0xdc, 0x3c, 0xbc, 0x7c, 0xfc, 0x02, 0x82,
+	0x42, 0xc2, 0x22, 0xa2, 0x62, 0xe2, 0x12, 0x92, 0x52, 0xd2, 0x32,
+	0xb2, 0x72, 0xf2, 0x0a, 0x8a, 0x4a, 0xca, 0x2a, 0xaa, 0x6a, 0xea,
+	0x1a, 0x9a, 0x5a, 0xda, 0x3a, 0xba, 0x7a, 0xfa, 0x06, 0x86, 0x46,
+	0xc6, 0x26, 0xa6, 0x66, 0xe6, 0x16, 0x96, 0x56, 0xd6, 0x36, 0xb6,
+	0x76, 0xf6, 0x0e, 0x8e, 0x4e, 0xce, 0x2e, 0xae, 0x6e, 0xee, 0x1e,
+	0x9e, 0x5e, 0xde, 0x3e, 0xbe, 0x7e, 0xfe, 0x01, 0x81, 0x41, 0xc1,
+	0x21, 0xa1, 0x61, 0xe1, 0x11, 0x91, 0x51, 0xd1, 0x31, 0xb1, 0x71,
+	0xf1, 0x09, 0x89, 0x49, 0xc9, 0x29, 0xa9, 0x69, 0xe9, 0x19, 0x99,
+	0x59, 0xd9, 0x39, 0xb9, 0x79, 0xf9, 0x05, 0x85, 0x45, 0xc5, 0x25,
+	0xa5, 0x65, 0xe5, 0x15, 0x95, 0x55, 0xd5, 0x35, 0xb5, 0x75, 0xf5,
+	0x0d, 0x8d, 0x4d, 0xcd, 0x2d, 0xad, 0x6d, 0xed, 0x1d, 0x9d, 0x5d,
+	0xdd, 0x3d, 0xbd, 0x7d, 0xfd, 0x03, 0x83, 0x43, 0xc3, 0x23, 0xa3,
+	0x63, 0xe3, 0x13, 0x93, 0x53, 0xd3, 0x33, 0xb3, 0x73, 0xf3, 0x0b,
+	0x8b, 0x4b, 0xcb, 0x2b, 0xab, 0x6b, 0xeb, 0x1b, 0x9b, 0x5b, 0xdb,
+	0x3b, 0xbb, 0x7b, 0xfb, 0x07, 0x87, 0x47, 0xc7, 0x27, 0xa7, 0x67,
+	0xe7, 0x17, 0x97, 0x57, 0xd7, 0x37, 0xb7, 0x77, 0xf7, 0x0f, 0x8f,
+	0x4f, 0xcf, 0x2f, 0xaf, 0x6f, 0xef, 0x1f, 0x9f, 0x5f, 0xdf, 0x3f,
+	0xbf, 0x7f, 0xff };
+
+/*
+ * wMaxPacketSize of pcm endpoints.
+ * keep synced with rates_in_packet_size and rates_out_packet_size in pcm.c
+ * fpp: frames per isopacket
+ *
+ * CAUTION: keep sizeof <= buffer[] in usb6fire_fw_init
+ */
+static const u8 ep_w_max_packet_size[] = {
+	0xe4, 0x00, 0xe4, 0x00, /* alt 1: 228 EP2 and EP6 (7 fpp) */
+	0xa4, 0x01, 0xa4, 0x01, /* alt 2: 420 EP2 and EP6 (13 fpp)*/
+	0x94, 0x01, 0x5c, 0x02  /* alt 3: 404 EP2 and 604 EP6 (25 fpp) */
+};
+
+struct ihex_record {
+	u16 address;
+	u8 len;
+	u8 data[256];
+	char error; /* true if an error occured parsing this record */
+
+	u8 max_len; /* maximum record length in whole ihex */
+
+	/* private */
+	const char *txt_data;
+	unsigned int txt_length;
+	unsigned int txt_offset; /* current position in txt_data */
+};
+
+static u8 usb6fire_fw_ihex_nibble(const u8 n)
+{
+	if (n >= '0' && n <= '9')
+		return n - '0';
+	else if (n >= 'A' && n <= 'F')
+		return n - ('A' - 10);
+	else if (n >= 'a' && n <= 'f')
+		return n - ('a' - 10);
+	return 0;
+}
+
+static u8 usb6fire_fw_ihex_hex(const u8 *data, u8 *crc)
+{
+	u8 val = (usb6fire_fw_ihex_nibble(data[0]) << 4) |
+			usb6fire_fw_ihex_nibble(data[1]);
+	*crc += val;
+	return val;
+}
+
+/*
+ * returns true if record is available, false otherwise.
+ * iff an error occured, false will be returned and record->error will be true.
+ */
+static bool usb6fire_fw_ihex_next_record(struct ihex_record *record)
+{
+	u8 crc = 0;
+	u8 type;
+	int i;
+
+	record->error = false;
+
+	/* find begin of record (marked by a colon) */
+	while (record->txt_offset < record->txt_length
+			&& record->txt_data[record->txt_offset] != ':')
+		record->txt_offset++;
+	if (record->txt_offset == record->txt_length)
+		return false;
+
+	/* number of characters needed for len, addr and type entries */
+	record->txt_offset++;
+	if (record->txt_offset + 8 > record->txt_length) {
+		record->error = true;
+		return false;
+	}
+
+	record->len = usb6fire_fw_ihex_hex(record->txt_data +
+			record->txt_offset, &crc);
+	record->txt_offset += 2;
+	record->address = usb6fire_fw_ihex_hex(record->txt_data +
+			record->txt_offset, &crc) << 8;
+	record->txt_offset += 2;
+	record->address |= usb6fire_fw_ihex_hex(record->txt_data +
+			record->txt_offset, &crc);
+	record->txt_offset += 2;
+	type = usb6fire_fw_ihex_hex(record->txt_data +
+			record->txt_offset, &crc);
+	record->txt_offset += 2;
+
+	/* number of cha