ASoC: Add Freescale SGTL5000 codec support

Add Freescale SGTL5000 codec support.
Supported features:
 - line-in and mic input
 - headphone and line-out output
 - line-in bypass ADC and DAC to headphone
 - 16, 20, 24, 32 bit audio
 - 8 ~ 96k sample rates

Signed-off-by: Zeng Zhaoming <zhaoming.zeng@freescale.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>

4 files changed, 1921 insertions, 0 deletions

diff --git a/sound/soc/codecs/Kconfig b/sound/soc/codecs/Kconfig
index e239345a4d5..c04da187129 100644
--- a/sound/soc/codecs/Kconfig
+++ b/sound/soc/codecs/Kconfig
@@ -33,6 +33,7 @@ config SND_SOC_ALL_CODECS
 	select SND_SOC_MAX98088 if I2C
 	select SND_SOC_MAX9877 if I2C
 	select SND_SOC_PCM3008
+	select SND_SOC_SGTL5000 if I2C
 	select SND_SOC_SN95031 if INTEL_SCU_IPC
 	select SND_SOC_SPDIF
 	select SND_SOC_SSM2602 if I2C
@@ -182,6 +183,10 @@ config SND_SOC_MAX98088
 config SND_SOC_PCM3008
        tristate
 
+#Freescale sgtl5000 codec
+config SND_SOC_SGTL5000
+	tristate
+
 config SND_SOC_SN95031
 	tristate
 
diff --git a/sound/soc/codecs/Makefile b/sound/soc/codecs/Makefile
index ae10507dd2e..3bbb08c512d 100644
--- a/sound/soc/codecs/Makefile
+++ b/sound/soc/codecs/Makefile
@@ -19,6 +19,7 @@ snd-soc-dmic-objs := dmic.o
 snd-soc-l3-objs := l3.o
 snd-soc-max98088-objs := max98088.o
 snd-soc-pcm3008-objs := pcm3008.o
+snd-soc-sgtl5000-objs := sgtl5000.o
 snd-soc-alc5623-objs := alc5623.o
 snd-soc-sn95031-objs := sn95031.o
 snd-soc-spdif-objs := spdif_transciever.o
@@ -103,6 +104,7 @@ obj-$(CONFIG_SND_SOC_L3)	+= snd-soc-l3.o
 obj-$(CONFIG_SND_SOC_JZ4740_CODEC)	+= snd-soc-jz4740-codec.o
 obj-$(CONFIG_SND_SOC_MAX98088)	+= snd-soc-max98088.o
 obj-$(CONFIG_SND_SOC_PCM3008)	+= snd-soc-pcm3008.o
+obj-$(CONFIG_SND_SOC_SGTL5000)  += snd-soc-sgtl5000.o
 obj-$(CONFIG_SND_SOC_SN95031)	+=snd-soc-sn95031.o
 obj-$(CONFIG_SND_SOC_SPDIF)	+= snd-soc-spdif.o
 obj-$(CONFIG_SND_SOC_SSM2602)	+= snd-soc-ssm2602.o
diff --git a/sound/soc/codecs/sgtl5000.c b/sound/soc/codecs/sgtl5000.c
new file mode 100644
index 00000000000..9eb206e852d
--- /dev/null
+++ b/sound/soc/codecs/sgtl5000.c
@@ -0,0 +1,1512 @@
+/*
+ * sgtl5000.c  --  SGTL5000 ALSA SoC Audio driver
+ *
+ * Copyright 2010-2011 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/slab.h>
+#include <linux/pm.h>
+#include <linux/i2c.h>
+#include <linux/clk.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/machine.h>
+#include <linux/regulator/consumer.h>
+#include <sound/core.h>
+#include <sound/tlv.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/soc.h>
+#include <sound/soc-dapm.h>
+#include <sound/initval.h>
+#include <mach/hardware.h>
+
+#include "sgtl5000.h"
+
+#define SGTL5000_DAP_REG_OFFSET	0x0100
+#define SGTL5000_MAX_REG_OFFSET	0x013A
+
+/* default value of sgtl5000 registers except DAP */
+static const u16 sgtl5000_regs[SGTL5000_MAX_REG_OFFSET >> 1] =  {
+	0xa011, /* 0x0000, CHIP_ID. 11 stand for revison 17 */
+	0x0000, /* 0x0002, CHIP_DIG_POWER. */
+	0x0008, /* 0x0004, CHIP_CKL_CTRL */
+	0x0010, /* 0x0006, CHIP_I2S_CTRL */
+	0x0000, /* 0x0008, reserved */
+	0x0008, /* 0x000A, CHIP_SSS_CTRL */
+	0x0000, /* 0x000C, reserved */
+	0x020c, /* 0x000E, CHIP_ADCDAC_CTRL */
+	0x3c3c, /* 0x0010, CHIP_DAC_VOL */
+	0x0000, /* 0x0012, reserved */
+	0x015f, /* 0x0014, CHIP_PAD_STRENGTH */
+	0x0000, /* 0x0016, reserved */
+	0x0000, /* 0x0018, reserved */
+	0x0000, /* 0x001A, reserved */
+	0x0000, /* 0x001E, reserved */
+	0x0000, /* 0x0020, CHIP_ANA_ADC_CTRL */
+	0x1818, /* 0x0022, CHIP_ANA_HP_CTRL */
+	0x0111, /* 0x0024, CHIP_ANN_CTRL */
+	0x0000, /* 0x0026, CHIP_LINREG_CTRL */
+	0x0000, /* 0x0028, CHIP_REF_CTRL */
+	0x0000, /* 0x002A, CHIP_MIC_CTRL */
+	0x0000, /* 0x002C, CHIP_LINE_OUT_CTRL */
+	0x0404, /* 0x002E, CHIP_LINE_OUT_VOL */
+	0x7060, /* 0x0030, CHIP_ANA_POWER */
+	0x5000, /* 0x0032, CHIP_PLL_CTRL */
+	0x0000, /* 0x0034, CHIP_CLK_TOP_CTRL */
+	0x0000, /* 0x0036, CHIP_ANA_STATUS */
+	0x0000, /* 0x0038, reserved */
+	0x0000, /* 0x003A, CHIP_ANA_TEST2 */
+	0x0000, /* 0x003C, CHIP_SHORT_CTRL */
+	0x0000, /* reserved */
+};
+
+/* default value of dap registers */
+static const u16 sgtl5000_dap_regs[] = {
+	0x0000, /* 0x0100, DAP_CONTROL */
+	0x0000, /* 0x0102, DAP_PEQ */
+	0x0040, /* 0x0104, DAP_BASS_ENHANCE */
+	0x051f, /* 0x0106, DAP_BASS_ENHANCE_CTRL */
+	0x0000, /* 0x0108, DAP_AUDIO_EQ */
+	0x0040, /* 0x010A, DAP_SGTL_SURROUND */
+	0x0000, /* 0x010C, DAP_FILTER_COEF_ACCESS */
+	0x0000, /* 0x010E, DAP_COEF_WR_B0_MSB */
+	0x0000, /* 0x0110, DAP_COEF_WR_B0_LSB */
+	0x0000, /* 0x0112, reserved */
+	0x0000, /* 0x0114, reserved */
+	0x002f, /* 0x0116, DAP_AUDIO_EQ_BASS_BAND0 */
+	0x002f, /* 0x0118, DAP_AUDIO_EQ_BAND0 */
+	0x002f, /* 0x011A, DAP_AUDIO_EQ_BAND2 */
+	0x002f, /* 0x011C, DAP_AUDIO_EQ_BAND3 */
+	0x002f, /* 0x011E, DAP_AUDIO_EQ_TREBLE_BAND4 */
+	0x8000, /* 0x0120, DAP_MAIN_CHAN */
+	0x0000, /* 0x0122, DAP_MIX_CHAN */
+	0x0510, /* 0x0124, DAP_AVC_CTRL */
+	0x1473, /* 0x0126, DAP_AVC_THRESHOLD */
+	0x0028, /* 0x0128, DAP_AVC_ATTACK */
+	0x0050, /* 0x012A, DAP_AVC_DECAY */
+	0x0000, /* 0x012C, DAP_COEF_WR_B1_MSB */
+	0x0000, /* 0x012E, DAP_COEF_WR_B1_LSB */
+	0x0000, /* 0x0130, DAP_COEF_WR_B2_MSB */
+	0x0000, /* 0x0132, DAP_COEF_WR_B2_LSB */
+	0x0000, /* 0x0134, DAP_COEF_WR_A1_MSB */
+	0x0000, /* 0x0136, DAP_COEF_WR_A1_LSB */
+	0x0000, /* 0x0138, DAP_COEF_WR_A2_MSB */
+	0x0000, /* 0x013A, DAP_COEF_WR_A2_LSB */
+};
+
+/* regulator supplies for sgtl5000, VDDD is an optional external supply */
+enum sgtl5000_regulator_supplies {
+	VDDA,
+	VDDIO,
+	VDDD,
+	SGTL5000_SUPPLY_NUM
+};
+
+/* vddd is optional supply */
+static const char *supply_names[SGTL5000_SUPPLY_NUM] = {
+	"VDDA",
+	"VDDIO",
+	"VDDD"
+};
+
+#define LDO_CONSUMER_NAME	"VDDD_LDO"
+#define LDO_VOLTAGE		1200000
+
+static struct regulator_consumer_supply ldo_consumer[] = {
+	REGULATOR_SUPPLY(LDO_CONSUMER_NAME, NULL),
+};
+
+struct regulator_init_data ldo_init_data = {
+	.constraints = {
+		.min_uV                 = 850000,
+		.max_uV                 = 1600000,
+		.valid_modes_mask       = REGULATOR_MODE_NORMAL,
+		.valid_ops_mask         = REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies = 1,
+	.consumer_supplies = &ldo_consumer[0],
+};
+
+/*
+ * sgtl5000 internal ldo regulator,
+ * enabled when VDDD not provided
+ */
+struct ldo_regulator {
+	struct regulator_desc desc;
+	struct regulator_dev *dev;
+	int voltage;
+	void *codec_data;
+	bool enabled;
+};
+
+/* sgtl5000 private structure in codec */
+struct sgtl5000_priv {
+	int sysclk;	/* sysclk rate */
+	int master;	/* i2s master or not */
+	int fmt;	/* i2s data format */
+	struct regulator_bulk_data supplies[SGTL5000_SUPPLY_NUM];
+	struct ldo_regulator *ldo;
+};
+
+/*
+ * mic_bias power on/off share the same register bits with
+ * output impedance of mic bias, when power on mic bias, we
+ * need reclaim it to impedance value.
+ * 0x0 = Powered off
+ * 0x1 = 2Kohm
+ * 0x2 = 4Kohm
+ * 0x3 = 8Kohm
+ */
+static int mic_bias_event(struct snd_soc_dapm_widget *w,
+	struct snd_kcontrol *kcontrol, int event)
+{
+	switch (event) {
+	case SND_SOC_DAPM_POST_PMU:
+		/* change mic bias resistor to 4Kohm */
+		snd_soc_update_bits(w->codec, SGTL5000_CHIP_MIC_CTRL,
+				SGTL5000_BIAS_R_4k, SGTL5000_BIAS_R_4k);
+		break;
+
+	case SND_SOC_DAPM_PRE_PMD:
+		/*
+		 * SGTL5000_BIAS_R_8k as mask to clean the two bits
+		 * of mic bias and output impedance
+		 */
+		snd_soc_update_bits(w->codec, SGTL5000_CHIP_MIC_CTRL,
+				SGTL5000_BIAS_R_8k, 0);
+		break;
+	}
+	return 0;
+}
+
+/*
+ * using codec assist to small pop, hp_powerup or lineout_powerup
+ * should stay setting until vag_powerup is fully ramped down,
+ * vag fully ramped down require 400ms.
+ */
+static int small_pop_event(struct snd_soc_dapm_widget *w,
+	struct snd_kcontrol *kcontrol, int event)
+{
+	switch (event) {
+	case SND_SOC_DAPM_PRE_PMU:
+		snd_soc_update_bits(w->codec, SGTL5000_CHIP_ANA_POWER,
+			SGTL5000_VAG_POWERUP, SGTL5000_VAG_POWERUP);
+		break;
+
+	case SND_SOC_DAPM_PRE_PMD:
+		snd_soc_update_bits(w->codec, SGTL5000_CHIP_ANA_POWER,
+			SGTL5000_VAG_POWERUP, 0);
+		msleep(400);
+		break;
+	default:
+		break;
+	}
+
+	return 0;
+}
+
+/* input sources for ADC */
+static const char *adc_mux_text[] = {
+	"MIC_IN", "LINE_IN"
+};
+
+static const struct soc_enum adc_enum =
+SOC_ENUM_SINGLE(SGTL5000_CHIP_ANA_CTRL, 2, 2, adc_mux_text);
+
+static const struct snd_kcontrol_new adc_mux =
+SOC_DAPM_ENUM("Capture Mux", adc_enum);
+
+/* input sources for DAC */
+static const char *dac_mux_text[] = {
+	"DAC", "LINE_IN"
+};
+
+static const struct soc_enum dac_enum =
+SOC_ENUM_SINGLE(SGTL5000_CHIP_ANA_CTRL, 6, 2, dac_mux_text);
+
+static const struct snd_kcontrol_new dac_mux =
+SOC_DAPM_ENUM("Headphone Mux", dac_enum);
+
+static const struct snd_soc_dapm_widget sgtl5000_dapm_widgets[] = {
+	SND_SOC_DAPM_INPUT("LINE_IN"),
+	SND_SOC_DAPM_INPUT("MIC_IN"),
+
+	SND_SOC_DAPM_OUTPUT("HP_OUT"),
+	SND_SOC_DAPM_OUTPUT("LINE_OUT"),
+
+	SND_SOC_DAPM_MICBIAS_E("Mic Bias", SGTL5000_CHIP_MIC_CTRL, 8, 0,
+				mic_bias_event,
+				SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_PRE_PMD),
+
+	SND_SOC_DAPM_PGA_E("HP", SGTL5000_CHIP_ANA_POWER, 4, 0, NULL, 0,
+			small_pop_event,
+			SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_PRE_PMD),
+	SND_SOC_DAPM_PGA_E("LO", SGTL5000_CHIP_ANA_POWER, 0, 0, NULL, 0,
+			small_pop_event,
+			SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_PRE_PMD),
+
+	SND_SOC_DAPM_MUX("Capture Mux", SND_SOC_NOPM, 0, 0, &adc_mux),
+	SND_SOC_DAPM_MUX("Headphone Mux", SND_SOC_NOPM, 0, 0, &dac_mux),
+
+	/* aif for i2s input */
+	SND_SOC_DAPM_AIF_IN("AIFIN", "Playback",
+				0, SGTL5000_CHIP_DIG_POWER,
+				0, 0),
+
+	/* aif for i2s output */
+	SND_SOC_DAPM_AIF_OUT("AIFOUT", "Capture",
+				0, SGTL5000_CHIP_DIG_POWER,
+				1, 0),
+
+	SND_SOC_DAPM_ADC("ADC", "Capture", SGTL5000_CHIP_ANA_POWER, 1, 0),
+
+	SND_SOC_DAPM_DAC("DAC", "Playback", SGTL5000_CHIP_ANA_POWER, 3, 0),
+};
+
+/* routes for sgtl5000 */
+static const struct snd_soc_dapm_route audio_map[] = {
+	{"Capture Mux", "LINE_IN", "LINE_IN"},	/* line_in --> adc_mux */
+	{"Capture Mux", "MIC_IN", "MIC_IN"},	/* mic_in --> adc_mux */
+
+	{"ADC", NULL, "Capture Mux"},		/* adc_mux --> adc */
+	{"AIFOUT", NULL, "ADC"},		/* adc --> i2s_out */
+
+	{"DAC", NULL, "AIFIN"},			/* i2s-->dac,skip audio mux */
+	{"Headphone Mux", "DAC", "DAC"},	/* dac --> hp_mux */
+	{"LO", NULL, "DAC"},			/* dac --> line_out */
+
+	{"Headphone Mux", "LINE_IN", "LINE_IN"},/* line_in --> hp_mux */
+	{"HP", NULL, "Headphone Mux"},		/* hp_mux --> hp */
+
+	{"LINE_OUT", NULL, "LO"},
+	{"HP_OUT", NULL, "HP"},
+};
+
+/* custom function to fetch info of PCM playback volume */
+static int dac_info_volsw(struct snd_kcontrol *kcontrol,
+			  struct snd_ctl_elem_info *uinfo)
+{
+	uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
+	uinfo->count = 2;
+	uinfo->value.integer.min = 0;
+	uinfo->value.integer.max = 0xfc - 0x3c;
+	return 0;
+}
+
+/*
+ * custom function to get of PCM playback volume
+ *
+ * dac volume register
+ * 15-------------8-7--------------0
+ * | R channel vol | L channel vol |
+ *  -------------------------------
+ *
+ * PCM volume with 0.5017 dB steps from 0 to -90 dB
+ *
+ * register values map to dB
+ * 0x3B and less = Reserved
+ * 0x3C = 0 dB
+ * 0x3D = -0.5 dB
+ * 0xF0 = -90 dB
+ * 0xFC and greater = Muted
+ *
+ * register value map to userspace value
+ *
+ * register value	0x3c(0dB)	  0xf0(-90dB)0xfc
+ *			------------------------------
+ * userspace value	0xc0			     0
+ */
+static int dac_get_volsw(struct snd_kcontrol *kcontrol,
+			 struct snd_ctl_elem_value *ucontrol)
+{
+	struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
+	int reg;
+	int l;
+	int r;
+
+	reg = snd_soc_read(codec, SGTL5000_CHIP_DAC_VOL);
+
+	/* get left channel volume */
+	l = (reg & SGTL5000_DAC_VOL_LEFT_MASK) >> SGTL5000_DAC_VOL_LEFT_SHIFT;
+
+	/* get right channel volume */
+	r = (reg & SGTL5000_DAC_VOL_RIGHT_MASK) >> SGTL5000_DAC_VOL_RIGHT_SHIFT;
+
+	/* make sure value fall in (0x3c,0xfc) */
+	l = clamp(l, 0x3c, 0xfc);
+	r = clamp(r, 0x3c, 0xfc);
+
+	/* invert it and map to userspace value */
+	l = 0xfc - l;
+	r = 0xfc - r;
+
+	ucontrol->value.integer.value[0] = l;
+	ucontrol->value.integer.value[1] = r;
+
+	return 0;
+}
+
+/*
+ * custom function to put of PCM playback volume
+ *
+ * dac volume register
+ * 15-------------8-7--------------0
+ * | R channel vol | L channel vol |
+ *  -------------------------------
+ *
+ * PCM volume with 0.5017 dB steps from 0 to -90 dB
+ *
+ * register values map to dB
+ * 0x3B and less = Reserved
+ * 0x3C = 0 dB
+ * 0x3D = -0.5 dB
+ * 0xF0 = -90 dB
+ * 0xFC and greater = Muted
+ *
+ * userspace value map to register value
+ *
+ * userspace value	0xc0			     0
+ *			------------------------------
+ * register value	0x3c(0dB)	0xf0(-90dB)0xfc
+ */
+static int dac_put_volsw(struct snd_kcontrol *kcontrol,
+			 struct snd_ctl_elem_value *ucontrol)
+{
+	struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
+	int reg;
+	int l;
+	int r;
+
+	l = ucontrol->value.integer.value[0];
+	r = ucontrol->value.integer.value[1];
+
+	/* make sure userspace volume fall in (0, 0xfc-0x3c) */
+	l = clamp(l, 0, 0xfc - 0x3c);
+	r = clamp(r, 0, 0xfc - 0x3c);
+
+	/* invert it, get the value can be set to register */
+	l = 0xfc - l;
+	r = 0xfc - r;
+
+	/* shift to get the register value */
+	reg = l << SGTL5000_DAC_VOL_LEFT_SHIFT |
+		r << SGTL5000_DAC_VOL_RIGHT_SHIFT;
+
+	snd_soc_write(codec, SGTL5000_CHIP_DAC_VOL, reg);
+
+	return 0;
+}
+
+static const DECLARE_TLV_DB_SCALE(capture_6db_attenuate, -600, 600, 0);
+
+/* tlv for mic gain, 0db 20db 30db 40db */
+static const unsigned int mic_gain_tlv[] = {
+	TLV_DB_RANGE_HEAD(4),
+	0, 0, TLV_DB_SCALE_ITEM(0, 0, 0),
+	1, 3, TLV_DB_SCALE_ITEM(2000, 1000, 0),
+};
+
+/* tlv for hp volume, -51.5db to 12.0db, step .5db */
+static const DECLARE_TLV_DB_SCALE(headphone_volume, -5150, 50, 0);
+
+static const struct snd_kcontrol_new sgtl5000_snd_controls[] = {
+	/* SOC_DOUBLE_S8_TLV with invert */
+	{
+		.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+		.name = "PCM Playback Volume",
+		.access = SNDRV_CTL_ELEM_ACCESS_TLV_READ |
+			SNDRV_CTL_ELEM_ACCESS_READWRITE,
+		.info = dac_info_volsw,
+		.get = dac_get_volsw,
+		.put = dac_put_volsw,
+	},
+
+	SOC_DOUBLE("Capture Volume", SGTL5000_CHIP_ANA_ADC_CTRL, 0, 4, 0xf, 0),
+	SOC_SINGLE_TLV("Capture Attenuate Switch (-6dB)",
+			SGTL5000_CHIP_ANA_ADC_CTRL,
+			8, 2, 0, capture_6db_attenuate),
+	SOC_SINGLE("Capture ZC Switch", SGTL5000_CHIP_ANA_CTRL, 1, 1, 0),
+
+	SOC_DOUBLE_TLV("Headphone Playback Volume",
+			SGTL5000_CHIP_ANA_HP_CTRL,
+			0, 8,
+			0x7f, 1,
+			headphone_volume),
+	SOC_SINGLE("Headphone Playback ZC Switch", SGTL5000_CHIP_ANA_CTRL,
+			5, 1, 0),
+
+	SOC_SINGLE_TLV("Mic Volume", SGTL5000_CHIP_MIC_CTRL,
+			0, 4, 0, mic_gain_tlv),
+};
+
+/* mute the codec used by alsa core */
+static int sgtl5000_digital_mute(struct snd_soc_dai *codec_dai, int mute)
+{
+	struct snd_soc_codec *codec = codec_dai->codec;
+	u16 adcdac_ctrl = SGTL5000_DAC_MUTE_LEFT | SGTL5000_DAC_MUTE_RIGHT;
+
+	snd_soc_update_bits(codec, SGTL5000_CHIP_ADCDAC_CTRL,
+			adcdac_ctrl, mute ? adcdac_ctrl : 0);
+
+	return 0;
+}
+
+/* set codec format */
+static int sgtl5000_set_dai_fmt(struct snd_soc_dai *codec_dai, unsigned int fmt)
+{
+	struct snd_soc_codec *codec = codec_dai->codec;
+	struct sgtl5000_priv *sgtl5000 = snd_soc_codec_get_drvdata(codec);
+	u16 i2sctl = 0;
+
+	sgtl5000->master = 0;
+	/*
+	 * i2s clock and frame master setting.
+	 * ONLY support:
+	 *  - clock and frame slave,
+	 *  - clock and frame master
+	 */
+	switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
+	case SND_SOC_DAIFMT_CBS_CFS:
+		break;
+	case SND_SOC_DAIFMT_CBM_CFM:
+		i2sctl |= SGTL5000_I2S_MASTER;
+		sgtl5000->master = 1;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	/* setting i2s data format */
+	switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
+	case SND_SOC_DAIFMT_DSP_A:
+		i2sctl |= SGTL5000_I2S_MODE_PCM;
+		break;
+	case SND_SOC_DAIFMT_DSP_B:
+		i2sctl |= SGTL5000_I2S_MODE_PCM;
+		i2sctl |= SGTL5000_I2S_LRALIGN;
+		break;
+	case SND_SOC_DAIFMT_I2S:
+		i2sctl |= SGTL5000_I2S_MODE_I2S_LJ;
+		break;
+	case SND_SOC_DAIFMT_RIGHT_J:
+		i2sctl |= SGTL5000_I2S_MODE_RJ;
+		i2sctl |= SGTL5000_I2S_LRPOL;
+		break;
+	case SND_SOC_DAIFMT_LEFT_J:
+		i2sctl |= SGTL5000_I2S_MODE_I2S_LJ;
+		i2sctl |= SGTL5000_I2S_LRALIGN;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	sgtl5000->fmt = fmt & SND_SOC_DAIFMT_FORMAT_MASK;
+
+	/* Clock inversion */
+	switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
+	case SND_SOC_DAIFMT_NB_NF:
+		break;
+	case SND_SOC_DAIFMT_IB_NF:
+		i2sctl |= SGTL5000_I2S_SCLK_INV;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	snd_soc_write(codec, SGTL5000_CHIP_I2S_CTRL, i2sctl);
+
+	return 0;
+}
+
+/* set codec sysclk */
+static int sgtl5000_set_dai_sysclk(struct snd_soc_dai *codec_dai,
+				   int clk_id, unsigned int freq, int dir)
+{
+	struct snd_soc_codec *codec = codec_dai->codec;
+	struct sgtl5000_priv *sgtl5000 = snd_soc_codec_get_drvdata(codec);
+
+	switch (clk_id) {
+	case SGTL5000_SYSCLK:
+		sgtl5000->sysclk = freq;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+/*
+ * set clock according to i2s frame clock,
+ * sgtl5000 provide 2 clock sources.
+ * 1. sys_mclk. sample freq can only configure to
+ *	1/256, 1/384, 1/512 of sys_mclk.
+ * 2. pll. can derive any audio clocks.
+ *
+ * clock setting rules:
+ * 1. in slave mode, only sys_mclk can use.
+ * 2. as constraint by sys_mclk, sample freq should
+ *	set to 32k, 44.1k and above.
+ * 3. using sys_mclk prefer to pll to save power.
+ */
+static int sgtl5000_set_clock(struct snd_soc_codec *codec, int frame_rate)
+{
+	struct sgtl5000_priv *sgtl5000 = snd_soc_codec_get_drvdata(codec);
+	int clk_ctl = 0;
+	int sys_fs;	/* sample freq */
+
+	/*
+	 * sample freq should be divided by frame clock,
+	 * if frame clock lower than 44.1khz, sample feq should set to
+	 * 32khz or 44.1khz.
+	 */
+	switch (frame_rate) {
+	case 8000:
+	case 16000:
+		sys_fs = 32000;
+		break;
+	case 11025:
+	case 22050:
+		sys_fs = 44100;
+		break;
+	default:
+		sys_fs = frame_rate;
+		break;
+	}
+
+	/* set divided factor of frame clock */
+	switch (sys_fs / frame_rate) {
+	case 4:
+		clk_ctl |= SGTL5000_RATE_MODE_DIV_4 << SGTL5000_RATE_MODE_SHIFT;
+		break;
+	case 2:
+		clk_ctl |= SGTL5000_RATE_MODE_DIV_2 << SGTL5000_RATE_MODE_SHIFT;
+		break;
+	case 1:
+		clk_ctl |= SGTL5000_RATE_MODE_DIV_1 << SGTL5000_RATE_MODE_SHIFT;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	/* set the sys_fs according to frame rate */
+	switch (sys_fs) {
+	case 32000:
+		clk_ctl |= SGTL5000_SYS_FS_32k << SGTL5000_SYS_FS_SHIFT;
+		break;
+	case 44100:
+		clk_ctl |= SGTL5000_SYS_FS_44_1k << SGTL5000_SYS_FS_SHIFT;
+		break;
+	case 48000:
+		clk_ctl |= SGTL5000_SYS_FS_48k << SGTL5000_SYS_FS_SHIFT;
+		break;
+	case 96000:
+		clk_ctl |= SGTL5000_SYS_FS_96k << SGTL5000_SYS_FS_SHIFT;
+		break;
+	default:
+		dev_err(codec->dev, "frame rate %d not supported\n",
+			frame_rate);
+		return -EINVAL;
+	}
+
+	/*
+	 * calculate the divider of mclk/sample_freq,
+	 * factor of freq =96k can only be 256, since mclk in range (12m,27m)
+	 */
+	switch (sgtl5000->sysclk / sys_fs) {
+	case 256:
+		clk_ctl |= SGTL5000_MCLK_FREQ_256FS <<
+			SGTL5000_MCLK_FREQ_SHIFT;
+		break;
+	case 384:
+		clk_ctl |= SGTL5000_MCLK_FREQ_384FS <<
+			SGTL5000_MCLK_FREQ_SHIFT;
+		break;
+	case 512:
+		clk_ctl |= SGTL5000_MCLK_FREQ_512FS <<
+			SGTL5000_MCLK_FREQ_SHIFT;
+		break;
+	default:
+		/* if mclk not satisify the divider, use pll */
+		if (sgtl5000->master) {
+			clk_ctl |= SGTL5000_MCLK_FREQ_PLL <<
+				SGTL5000_MCLK_FREQ_SHIFT;
+		} else {
+			dev_err(codec->dev,
+				"PLL not supported in slave mode\n");
+			return -EINVAL;
+		}
+	}
+
+	/* if using pll, please check manual 6.4.2 for detail */
+	if ((clk_ctl & SGTL5000_MCLK_FREQ_MASK) == SGTL5000_MCLK_FREQ_PLL) {
+		u64 out, t;
+		int div2;
+		int pll_ctl;
+		unsigned int in, int_div, frac_div;
+
+		if (sgtl5000->sysclk > 17000000) {
+			div2 = 1;
+			in = sgtl5000->sysclk / 2;
+		} else {
+			div2 = 0;
+			in = sgtl5000->sysclk;
+		}
+		if (sys_fs == 44100)
+			out = 180633600;
+		else
+			out = 196608000;
+		t = do_div(out, in);
+		int_div = out;
+		t *= 2048;
+		do_div(t, in);
+		frac_div = t;
+		pll_ctl = int_div << SGTL5000_PLL_INT_DIV_SHIFT |
+		    frac_div << SGTL5000_PLL_FRAC_DIV_SHIFT;
+
+		snd_soc_write(codec, SGTL5000_CHIP_PLL_CTRL, pll_ctl);
+		if (div2)
+			snd_soc_update_bits(codec,
+				SGTL5000_CHIP_CLK_TOP_CTRL,
+				SGTL5000_INPUT_FREQ_DIV2,
+				SGTL5000_INPUT_FREQ_DIV2);
+		else
+			snd_soc_update_bits(codec,
+				SGTL5000_CHIP_CLK_TOP_CTRL,
+				SGTL5000_INPUT_FREQ_DIV2,
+				0);
+
+		/* power up pll */
+		snd_soc_update_bits(codec, SGTL5000_CHIP_ANA_POWER,
+			SGTL5000_PLL_POWERUP | SGTL5000_VCOAMP_POWERUP,
+			SGTL5000_PLL_POWERUP | SGTL5000_VCOAMP_POWERUP);
+	} else {
+		/* power down pll */
+		snd_soc_update_bits(codec, SGTL5000_CHIP_ANA_POWER,
+			SGTL5000_PLL_POWERUP | SGTL5000_VCOAMP_POWERUP,
+			0);
+	}
+
+	/* if using pll, clk_ctrl must be set after pll power up */
+	snd_soc_write(codec, SGTL5000_CHIP_CLK_CTRL, clk_ctl);
+
+	return 0;
+}
+
+/*
+ * Set PCM DAI bit size and sample rate.
+ * input: params_rate, params_fmt
+ */
+static int sgtl5000_pcm_hw_params(struct snd_pcm_substream *substream,
+				  struct snd_pcm_hw_params *params,
+				  struct snd_soc_dai *dai)
+{
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	struct snd_soc_codec *codec = rtd->codec;
+	struct sgtl5000_priv *sgtl5000 = snd_soc_codec_get_drvdata(codec);
+	int channels = params_channels(params);
+	int i2s_ctl = 0;
+	int stereo;
+	int ret;
+
+	/* sysclk should already set */
+	if (!sgtl5000->sysclk) {
+		dev_err(codec->dev, "%s: set sysclk first!\n", __func__);
+		return -EFAULT;
+	}
+
+	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
+		stereo = SGTL5000_DAC_STEREO;
+	else
+		stereo = SGTL5000_ADC_STEREO;
+
+	/* set mono to save power */
+	snd_soc_update_bits(codec, SGTL5000_CHIP_ANA_POWER, stereo,
+			channels == 1 ? 0 : stereo);
+
+	/* set codec clock base on lrclk */
+	ret = sgtl5000_set_clock(codec, params_rate(params));
+	if (ret)
+		return ret;
+
+	/* set i2s data format */
+	switch (params_format(params)) {
+	case SNDRV_PCM_FORMAT_S16_LE:
+		if (sgtl5000->fmt == SND_SOC_DAIFMT_RIGHT_J)
+			return -EINVAL;
+		i2s_ctl |= SGTL5000_I2S_DLEN_16 << SGTL5000_I2S_DLEN_SHIFT;
+		i2s_ctl |= SGTL5000_I2S_SCLKFREQ_32FS <<
+		    SGTL5000_I2S_SCLKFREQ_SHIFT;
+		break;
+	case SNDRV_PCM_FORMAT_S20_3LE:
+		i2s_ctl |= SGTL5000_I2S_DLEN_20 << SGTL5000_I2S_DLEN_SHIFT;
+		i2s_ctl |= SGTL5000_I2S_SCLKFREQ_64FS <<
+		    SGTL5000_I2S_SCLKFREQ_SHIFT;
+		break;
+	case SNDRV_PCM_FORMAT_S24_LE:
+		i2s_ctl |= SGTL5000_I2S_DLEN_24 << SGTL5000_I2S_DLEN_SHIFT;
+		i2s_ctl |= SGTL5000_I2S_SCLKFREQ_64FS <<
+		    SGTL5000_I2S_SCLKFREQ_SHIFT;
+		break;
+	case SNDRV_PCM_FORMAT_S32_LE:
+		if (sgtl5000->fmt == SND_SOC_DAIFMT_RIGHT_J)
+			return -EINVAL;
+		i2s_ctl |= SGTL5000_I2S_DLEN_32 << SGTL5000_I2S_DLEN_SHIFT;
+		i2s_ctl |= SGTL5000_I2S_SCLKFREQ_64FS <<
+		    SGTL5000_I2S_SCLKFREQ_SHIFT;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	snd_soc_update_bits(codec, SGTL5000_CHIP_I2S_CTRL, i2s_ctl, i2s_ctl);
+
+	return 0;
+}
+
+static int ldo_regulator_is_enabled(struct regulator_dev *dev)
+{
+	struct ldo_regulator *ldo = rdev_get_drvdata(dev);
+
+	return ldo->enabled;
+}
+
+static int ldo_regulator_enable(struct regulator_dev *dev)
+{
+	struct ldo_regulator *ldo = rdev_get_drvdata(dev);
+	struct snd_soc_codec *codec = (struct snd_soc_codec *)ldo->codec_data;
+	int reg;
+
+	if (ldo_regulator_is_enabled(dev))
+		return 0;
+
+	/* set regulator value firstly */
+	reg = (1600 - ldo->voltage / 1000) / 50;
+	reg = clamp(reg, 0x0, 0xf);
+
+	/* amend the voltage value, unit: uV */
+	ldo->voltage = (1600 - reg * 50) * 1000;
+
+	/* set voltage to register */
+	snd_soc_update_bits(codec, SGTL5000_CHIP_LINREG_CTRL,
+				(0x1 << 4) - 1, reg);
+
+	snd_soc_update_bits(codec, SGTL5000_CHIP_ANA_POWER,
+				SGTL5000_LINEREG_D_POWERUP,
+				SGTL5000_LINEREG_D_POWERUP);
+
+	/* when internal ldo enabled, simple digital power can be disabled */
+	snd_soc_update_bits(codec, SGTL5000_CHIP_ANA_POWER,
+				SGTL5000_LINREG_SIMPLE_POWERUP,
+				0);
+
+	ldo->enabled = 1;
+	return 0;
+}
+
+static int ldo_regulator_disable(struct regulator_dev *dev)
+{
+	struct ldo_regulator *ldo = rdev_get_drvdata(dev);
+	struct snd_soc_codec *codec = (struct snd_soc_codec *)ldo->codec_data;
+
+	snd_soc_update_bits(codec, SGTL5000_CHIP_ANA_POWER,
+				SGTL5000_LINEREG_D_POWERUP,
+				0);
+
+	/* clear voltage info */
+	snd_soc_update_bits(codec, SGTL5000_CHIP_LINREG_CTRL,
+				(0x1 << 4) - 1, 0);
+
+	ldo->enabled = 0;
+
+	return 0;
+}
+
+static int ldo_regulator_get_voltage(struct regulator_dev *dev)
+{
+	struct ldo_regulator *ldo = rdev_get_drvdata(dev);
+
+	return ldo->voltage;
+}
+
+static struct regulator_ops ldo_regulator_ops = {
+	.is_enabled = ldo_regulator_is_enabled,
+	.enable = ldo_regulator_enable,
+	.disable = ldo_regulator_disable,
+	.get_voltage = ldo_regulator_get_voltage,
+};
+
+static int ldo_regulator_register(struct snd_soc_codec *codec,
+				struct regulator_init_data *init_data,
+				int voltage)
+{
+	struct ldo_regulator *ldo;
+
+	ldo = kzalloc(sizeof(struct ldo_regulator), GFP_KERNEL);
+
+	if (!ldo) {
+		dev_err(codec->dev, "failed to allocate ldo_regulator\n");
+		return -ENOMEM;
+	}
+
+	ldo->desc.name = kstrdup(dev_name(codec->dev), GFP_KERNEL);
+	if (!ldo->desc.name) {
+		kfree(ldo);
+		dev_err(codec->dev, "failed to allocate decs name memory\n");
+		return -ENOMEM;
+	}
+
+	ldo->desc.type  = REGULATOR_VOLTAGE;
+	ldo->desc.owner = THIS_MODULE;
+	ldo->desc.ops   = &ldo_regulator_ops;
+	ldo->desc.n_voltages = 1;
+
+	ldo->codec_data = codec;
+	ldo->voltage = voltage;
+
+	ldo->dev = regulator_register(&ldo->desc, codec->dev,
+					  init_data, ldo);
+	if (IS_ERR(ldo->dev)) {
+		dev_err(codec->dev, "failed to register regulator\n");
+		kfree(ldo->desc.name);
+		kfree(ldo);
+
+		return PTR_ERR(ldo->dev);
+	}
+
+	return 0;
+}
+
+static int ldo_regulator_remove(struct snd_soc_codec *codec)
+{
+	struct sgtl5000_priv *sgtl5000 = snd_soc_codec_get_drvdata(codec);
+	struct ldo_regulator *ldo = sgtl5000->ldo;
+
+	if (!ldo)
+		return 0;
+
+	regulator_unregister(ldo->dev);
+	kfree(ldo->desc.name);
+	kfree(ldo);
+
+	return 0;
+}
+
+/*
+ * set dac bias
+ * common state changes:
+ * startup:
+ * off --> standby --> prepare --> on
+ * standby --> prepare --> on
+ *
+ * stop:
+ * on --> prepare --> standby
+ */
+static int sgtl5000_set_bias_level(struct snd_soc_codec *codec,
+				   enum snd_soc_bias_level level)
+{
+	int ret;
+	struct sgtl5000_priv *sgtl5000 = snd_soc_codec_get_drvdata(codec);
+
+	switch (level) {
+	case SND_SOC_BIAS_ON:
+	case SND_SOC_BIAS_PREPARE:
+		break;
+	case SND_SOC_BIAS_STANDBY:
+		if (codec->dapm.bias_level == SND_SOC_BIAS_OFF) {
+			ret = regulator_bulk_enable(
+						ARRAY_SIZE(sgtl5000->supplies),
+						sgtl5000->supplies);
+			if (ret)
+				return ret;
+			udelay(10);
+		}
+
+		break;
+	case SND_SOC_BIAS_OFF:
+		regulator_bulk_disable(ARRAY_SIZE(sgtl5000->supplies),
+					sgtl5000->supplies);
+		break;
+	}
+
+	codec->dapm.bias_level = level;
+	return 0;
+}
+
+#define SGTL5000_FORMATS (SNDRV_PCM_FMTBIT_S16_LE |\
+			SNDRV_PCM_FMTBIT_S20_3LE |\
+			SNDRV_PCM_FMTBIT_S24_LE |\
+			SNDRV_PCM_FMTBIT_S32_LE)
+
+struct snd_soc_dai_ops sgtl5000_ops = {
+	.hw_params = sgtl5000_pcm_hw_params,
+	.digital_mute = sgtl5000_digital_mute,
+	.set_fmt = sgtl5000_set_dai_fmt,
+	.set_sysclk = sgtl5000_set_dai_sysclk,
+};
+
+static struct snd_soc_dai_driver sgtl5000_dai = {
+	.name = "sgtl5000",
+	.playback = {
+		.stream_name = "Playback",
+		.channels_min = 1,
+		.channels_max = 2,
+		/*
+		 * only support 8~48K + 96K,
+		 * TODO modify hw_param to support more
+		 */
+		.rates = SNDRV_PCM_RATE_8000_48000 | SNDRV_PCM_RATE_96000,
+		.formats = SGTL5000_FORMATS,
+	},
+	.capture = {
+		.stream_name = "Capture",
+		.channels_min = 1,
+		.channels_max = 2,
+		.rates = SNDRV_PCM_RATE_8000_48000 | SNDRV_PCM_RATE_96000,
+		.formats = SGTL5000_FORMATS,
+	},
+	.ops = &sgtl5000_ops,
+	.symmetric_rates = 1,
+};
+
+static int sgtl5000_volatile_register(struct snd_soc_codec *codec,
+					unsigned int reg)
+{
+	switch (reg) {
+	case SGTL5000_CHIP_ID:
+	case SGTL5000_CHIP_ADCDAC_CTRL:
+	case SGTL5000_CHIP_ANA_STATUS:
+		return 1;
+	}
+
+	return 0;
+}
+
+#ifdef CONFIG_SUSPEND
+static int sgtl5000_suspend(struct snd_soc_codec *codec, pm_message_t state)
+{
+	sgtl5000_set_bias_level(codec, SND_SOC_BIAS_OFF);
+
+	return 0;
+}
+
+/*
+ * restore all sgtl5000 registers,
+ * since a big hole between dap and regular registers,
+ * we will restore them respectively.
+ */
+static int sgtl5000_restore_regs(struct snd_soc_codec *codec)
+{
+	u16 *cache = codec->reg_cache;
+	int i;
+	int regular_regs = SGTL5000_CHIP_SHORT_CTRL >> 1;
+
+	/* restore regular registers */
+	for (i = 0; i < regular_regs; i++) {
+		int reg = i << 1;
+
+		/* this regs depends on the others */
+		if (reg == SGTL5000_CHIP_ANA_POWER ||
+			reg == SGTL5000_CHIP_CLK_CTRL ||
+			reg == SGTL5000_CHIP_LINREG_CTRL ||
+			reg == SGTL5000_CHIP_LINE_OUT_CTRL ||
+			reg == SGTL5000_CHIP_CLK_CTRL)
+			continue;
+
+		snd_soc_write(codec, reg, cache[i]);
+	}
+
+	/* restore dap registers */
+	for (i = SGTL5000_DAP_REG_OFFSET >> 1;
+			i < SGTL5000_MAX_REG_OFFSET >> 1; i++) {
+		int reg = i << 1;
+
+		snd_soc_write(codec, reg, cache[i]);
+	}
+
+	/*
+	 * restore power and other regs according
+	 * to set_power() and set_clock()
+	 */
+	snd_soc_write(codec, SGTL5000_CHIP_LINREG_CTRL,
+			cache[SGTL5000_CHIP_LINREG_CTRL >> 1]);
+
+	snd_soc_write(codec, SGTL5000_CHIP_ANA_POWER,
+			cache[SGTL5000_CHIP_ANA_POWER >> 1]);
+
+	snd_soc_write(codec, SGTL5000_CHIP_CLK_CTRL,
+			cache[SGTL5000_CHIP_CLK_CTRL >> 1]);
+
+	snd_soc_write(codec, SGTL5000_CHIP_REF_CTRL,
+			cache[SGTL5000_CHIP_REF_CTRL >> 1]);
+
+	snd_soc_write(codec, SGTL5000_CHIP_LINE_OUT_CTRL,
+			cache[SGTL5000_CHIP_LINE_OUT_CTRL >> 1]);
+	return 0;
+}
+
+static int sgtl5000_resume(struct snd_soc_codec *codec)
+{
+	/* Bring the codec back up to standby to enable regulators */
+	sgtl5000_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
+
+	/* Restore registers by cached in memory */
+	sgtl5000_restore_regs(codec);
+	return 0;
+}
+#else
+#define sgtl5000_suspend NULL
+#define sgtl5000_resume  NULL
+#endif	/* CONFIG_SUSPEND */
+
+/*
+ * sgtl5000 has 3 internal power supplies:
+ * 1. VAG, normally set to vdda/2
+ * 2. chargepump, set to different value
+ *	according to voltage of vdda and vddio
+ * 3. line out VAG, normally set to vddio/2
+ *
+ * and should be set according to:
+ * 1. vddd provided by external or not
+ * 2. vdda and vddio voltage value. > 3.1v or not
+ * 3. chip revision >=0x11 or not. If >=0x11, not use external vddd.
+ */
+static int sgtl5000_set_power_regs(struct snd_soc_codec *codec)
+{
+	int vddd;
+	int vdda;
+	int vddio;
+	u16 ana_pwr;
+	u16 lreg_ctrl;
+	int vag;
+	struct sgtl5000_priv *sgtl5000 = snd_soc_codec_get_drvdata(codec);
+
+	vdda  = regulator_get_voltage(sgtl5000->supplies[VDDA].consumer);
+	vddio = regulator_get_voltage(sgtl5000->supplies[VDDIO].consumer);
+	vddd  = regulator_get_voltage(sgtl5000->supplies[VDDD].consumer);
+
+	vdda  = vdda / 1000;
+	vddio = vddio / 1000;
+	vddd  = vddd / 1000;
+
+	if (vdda <= 0 || vddio <= 0 || vddd < 0) {
+		dev_err(codec->dev, "regulator voltage not set correctly\n");
+
+		return -EINVAL;
+	}
+
+	/* according to datasheet, maximum voltage of supplies */
+	if (vdda > 3600 || vddio > 3600 || vddd > 1980) {
+		dev_err(codec->dev,
+			"exceed max voltage vdda %dmv vddio %dma vddd %dma\n",
+			vdda, vddio, vddd);
+
+		return -EINVAL;
+	}
+
+	/* reset value */
+	ana_pwr = snd_soc_read(codec, SGTL5000_CHIP_ANA_POWER);
+	ana_pwr |= SGTL5000_DAC_STEREO |
+			SGTL5000_ADC_STEREO |
+			SGTL5000_REFTOP_POWERUP;
+	lreg_ctrl = snd_soc_read(codec, SGTL5000_CHIP_LINREG_CTRL);
+
+	if (vddio < 3100 && vdda < 3100) {
+		/* enable internal oscillator used for charge pump */
+		snd_soc_update_bits(codec, SGTL5000_CHIP_CLK_TOP_CTRL,
+					SGTL5000_INT_OSC_EN,
+					SGTL5000_INT_OSC_EN);
+		/* Enable VDDC charge pump */
+		ana_pwr |= SGTL5000_VDDC_CHRGPMP_POWERUP;
+	} else if (vddio >= 3100 && vdda >= 3100) {
+		/*
+		 * if vddio and vddd > 3.1v,
+		 * charge pump should be clean before set ana_pwr
+		 */
+		snd_soc_update_bits(codec, SGTL5000_CHIP_ANA_POWER,
+				SGTL5000_VDDC_CHRGPMP_POWERUP, 0);
+
+		/* VDDC use VDDIO rail */
+		lreg_ctrl |= SGTL5000_VDDC_ASSN_OVRD;
+		lreg_ctrl |= SGTL5000_VDDC_MAN_ASSN_VDDIO <<
+			    SGTL5000_VDDC_MAN_ASSN_SHIFT;
+	}
+
+	snd_soc_write(codec, SGTL5000_CHIP_LINREG_CTRL, lreg_ctrl);
+
+	snd_soc_write(codec, SGTL5000_CHIP_ANA_POWER, ana_pwr);
+
+	/* set voltage to register */
+	snd_soc_update_bits(codec, SGTL5000_CHIP_LINREG_CTRL,
+				(0x1 << 4) - 1, 0x8);
+
+	/*
+	 * if vddd linear reg has been enabled,
+	 * simple digital supply should be clear to get
+	 * proper VDDD voltage.
+	 */
+	if (ana_pwr & SGTL5000_LINEREG_D_POWERUP)
+		snd_soc_update_bits(codec, SGTL5000_CHIP_ANA_POWER,
+				SGTL5000_LINREG_SIMPLE_POWERUP,
+				0);
+	else
+		snd_soc_update_bits(codec, SGTL5000_CHIP_ANA_POWER,
+				SGTL5000_LINREG_SIMPLE_POWERUP |
+				SGTL5000_STARTUP_POWERUP,
+				0);
+
+	/*
+	 * set ADC/DAC VAG to vdda / 2,
+	 * should stay in range (0.8v, 1.575v)
+	 */
+	vag = vdda / 2;
+	if (vag <= SGTL5000_ANA_GND_BASE)
+		vag = 0;
+	else if (vag >= SGTL5000_ANA_GND_BASE + SGTL5000_ANA_GND_STP *
+		 (SGTL5000_ANA_GND_MASK >> SGTL5000_ANA_GND_SHIFT))
+		vag = SGTL5000_ANA_GND_MASK >> SGTL5000_ANA_GND_SHIFT;
+	else
+		vag = (vag - SGTL5000_ANA_GND_BASE) / SGTL5000_ANA_GND_STP;
+
+	snd_soc_update_bits(codec, SGTL5000_CHIP_REF_CTRL,
+			vag << SGTL5000_ANA_GND_SHIFT,
+			vag << SGTL5000_ANA_GND_SHIFT);
+
+	/* set line out VAG to vddio / 2, in range (0.8v, 1.675v) */
+	vag = vddio / 2;
+	if (vag <= SGTL5000_LINE_OUT_GND_BASE)
+		vag = 0;
+	else if (vag >= SGTL5000_LINE_OUT_GND_BASE +
+		SGTL5000_LINE_OUT_GND_STP * SGTL5000_LINE_OUT_GND_MAX)
+		vag = SGTL5000_LINE_OUT_GND_MAX;
+	else
+		vag = (vag - SGTL5000_LINE_OUT_GND_BASE) /
+		    SGTL5000_LINE_OUT_GND_STP;
+
+	snd_soc_update_bits(codec, SGTL5000_CHIP_LINE_OUT_CTRL,
+			vag << SGTL5000_LINE_OUT_GND_SHIFT |
+			SGTL5000_LINE_OUT_CURRENT_360u <<
+				SGTL5000_LINE_OUT_CURRENT_SHIFT,
+			vag << SGTL5000_LINE_OUT_GND_SHIFT |
+			SGTL5000_LINE_OUT_CURRENT_360u <<
+				SGTL5000_LINE_OUT_CURRENT_SHIFT);
+
+	return 0;
+}
+
+static int sgtl5000_enable_regulators(struct snd_soc_codec *codec)
+{
+	u16 reg;
+	int ret;
+	int rev;
+	int i;
+	int external_vddd = 0;
+	struct sgtl5000_priv *sgtl5000 = snd_soc_codec_get_drvdata(codec);
+
+	for (i = 0; i < ARRAY_SIZE(sgtl5000->supplies); i++)
+		sgtl5000->supplies[i].supply = supply_names[i];
+
+	ret = regulator_bulk_get(codec->dev, ARRAY_SIZE(sgtl5000->supplies),
+				sgtl5000->supplies);
+	if (!ret)
+		external_vddd = 1;
+	else {
+		/* set internal ldo to 1.2v */
+		int voltage = LDO_VOLTAGE;
+
+		ret = ldo_regulator_register(codec, &ldo_init_data, voltage);
+		if (ret) {
+			dev_err(codec->dev,
+			"Failed to register vddd internal supplies: %d\n",
+				ret);
+			return ret;
+		}
+
+		sgtl5000->supplies[VDDD].supply = LDO_CONSUMER_NAME;
+
+		ret = regulator_bulk_get(codec->dev,
+				ARRAY_SIZE(sgtl5000->supplies),
+				sgtl5000->supplies);
+
+		if (ret) {
+			ldo_regulator_remove(codec);
+			dev_err(codec->dev,
+				"Failed to request supplies: %d\n", ret);
+
+			return ret;
+		}
+	}
+
+	ret = regulator_bulk_enable(ARRAY_SIZE(sgtl5000->supplies),
+					sgtl5000->supplies);
+	if (ret)
+		goto err_regulator_free;
+
+	/* wait for all power rails bring up */
+	udelay(10);
+
+	/* read chip information */
+	reg = snd_soc_read(codec, SGTL5000_CHIP_ID);
+	if (((reg & SGTL5000_PARTID_MASK) >> SGTL5000_PARTID_SHIFT) !=
+	    SGTL5000_PARTID_PART_ID) {
+		dev_err(codec->dev,
+			"Device with ID register %x is not a sgtl5000\n", reg);
+		ret = -ENODEV;
+		goto err_regulator_disable;
+	}
+
+	rev = (reg & SGTL5000_REVID_MASK) >> SGTL5000_REVID_SHIFT;
+	dev_info(codec->dev, "sgtl5000 revision %d\n", rev);
+
+	/*
+	 * workaround for revision 0x11 and later,
+	 * roll back to use internal LDO
+	 */
+	if (external_vddd && rev >= 0x11) {
+		int voltage = LDO_VOLTAGE;
+		/* disable all regulator first */
+		regulator_bulk_disable(ARRAY_SIZE(sgtl5000->supplies),
+					sgtl5000->supplies);
+		/* free VDDD regulator */
+		regulator_bulk_free(ARRAY_SIZE(sgtl5000->supplies),
+					sgtl5000->supplies);
+
+		ret = ldo_regulator_register(codec, &ldo_init_data, voltage);
+		if (ret)
+			return ret;
+
+		sgtl5000->supplies[VDDD].supply = LDO_CONSUMER_NAME;
+
+		ret = regulator_bulk_get(codec->dev,
+				ARRAY_SIZE(sgtl5000->supplies),
+				sgtl5000->supplies);
+		if (ret) {
+			ldo_regulator_remove(codec);
+			dev_err(codec->dev,
+				"Failed to request supplies: %d\n", ret);
+
+			return ret;
+		}
+
+		ret = regulator_bulk_enable(ARRAY_SIZE(sgtl5000->supplies),
+						sgtl5000->supplies);
+		if (ret)
+			goto err_regulator_free;
+
+		/* wait for all power rails bring up */
+		udelay(10);
+	}
+
+	return 0;
+
+err_regulator_disable:
+	regulator_bulk_disable(ARRAY_SIZE(sgtl5000->supplies),
+				sgtl5000->supplies);
+err_regulator_free:
+	regulator_bulk_free(ARRAY_SIZE(sgtl5000->supplies),
+				sgtl5000->supplies);
+	if (external_vddd)
+		ldo_regulator_remove(codec);
+	return ret;
+
+}
+
+static int sgtl5000_probe(struct snd_soc_codec *codec)
+{
+	int ret;
+	struct sgtl5000_priv *sgtl5000 = snd_soc_codec_get_drvdata(codec);
+
+	/* setup i2c data ops */
+	ret = snd_soc_codec_set_cache_io(codec, 16, 16, SND_SOC_I2C);
+	if (ret < 0) {
+		dev_err(codec->dev, "Failed to set cache I/O: %d\n", ret);
+		return ret;
+	}
+
+	ret = sgtl5000_enable_regulators(codec);
+	if (ret)
+		return ret;
+
+	/* power up sgtl5000 */
+	ret = sgtl5000_set_power_regs(codec);
+	if (ret)
+		goto err;
+
+	/* enable small pop, introduce 400ms delay in turning off */
+	snd_soc_update_bits(codec, SGTL5000_CHIP_REF_CTRL,
+				SGTL5000_SMALL_POP,
+				SGTL5000_SMALL_POP);
+
+	/* disable short cut detector */
+	snd_soc_write(codec, SGTL5000_CHIP_SHORT_CTRL, 0);
+
+	/*
+	 * set i2s as default input of sound switch
+	 * TODO: add sound switch to control and dapm widge.
+	 */
+	snd_soc_write(codec, SGTL5000_CHIP_SSS_CTRL,
+			SGTL5000_DAC_SEL_I2S_IN << SGTL5000_DAC_SEL_SHIFT);
+	snd_soc_write(codec, SGTL5000_CHIP_DIG_POWER,
+			SGTL5000_ADC_EN | SGTL5000_DAC_EN);
+
+	/* enable dac volume ramp by default */
+	snd_soc_write(codec, SGTL5000_CHIP_ADCDAC_CTRL,
+			SGTL5000_DAC_VOL_RAMP_EN |
+			SGTL5000_DAC_MUTE_RIGHT |
+			SGTL5000_DAC_MUTE_LEFT);
+
+	snd_soc_write(codec, SGTL5000_CHIP_PAD_STRENGTH, 0x015f);
+
+	snd_soc_write(codec, SGTL5000_CHIP_ANA_CTRL,
+			SGTL5000_HP_ZCD_EN |
+			SGTL5000_ADC_ZCD_EN);
+
+	snd_soc_write(codec, SGTL5000_CHIP_MIC_CTRL, 0);
+
+	/*
+	 * disable DAP
+	 * TODO:
+	 * Enable DAP in kcontrol and dapm.
+	 */
+	snd_soc_write(codec, SGTL5000_DAP_CTRL, 0);
+
+	/* leading to standby state */
+	ret = sgtl5000_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
+	if (ret)
+		goto err;
+
+	snd_soc_add_controls(codec, sgtl5000_snd_controls,
+			     ARRAY_SIZE(sgtl5000_snd_controls));
+
+	snd_soc_dapm_new_controls(&codec->dapm, sgtl5000_dapm_widgets,
+				  ARRAY_SIZE(sgtl5000_dapm_widgets));
+
+	snd_soc_dapm_add_routes(&codec->dapm, audio_map,
+				ARRAY_SIZE(audio_map));
+
+	snd_soc_dapm_new_widgets(&codec->dapm);
+
+	return 0;
+
+err:
+	regulator_bulk_disable(ARRAY_SIZE(sgtl5000->supplies),
+						sgtl5000->supplies);
+	regulator_bulk_free(ARRAY_SIZE(sgtl5000->supplies),
+				sgtl5000->supplies);
+	ldo_regulator_remove(codec);
+
+	return ret;
+}
+
+static int sgtl5000_remove(struct snd_soc_codec *codec)
+{
+	struct sgtl5000_priv *sgtl5000 = snd_soc_codec_get_drvdata(codec);
+
+	sgtl5000_set_bias_level(codec, SND_SOC_BIAS_OFF);
+
+	regulator_bulk_disable(ARRAY_SIZE(sgtl5000->supplies),
+						sgtl5000->supplies);
+	regulator_bulk_free(ARRAY_SIZE(sgtl5000->supplies),
+				sgtl5000->supplies);
+	ldo_regulator_remove(codec);
+
+	return 0;
+}
+
+struct snd_soc_codec_driver sgtl5000_driver = {
+	.probe = sgtl5000_probe,
+	.remove = sgtl5000_remove,
+	.suspend = sgtl5000_suspend,
+	.resume = sgtl5000_resume,
+	.set_bias_level = sgtl5000_set_bias_level,
+	.reg_cache_size = ARRAY_SIZE(sgtl5000_regs),
+	.reg_word_size = sizeof(u16),
+	.reg_cache_step = 2,
+	.reg_cache_default = sgtl5000_regs,
+	.volatile_register = sgtl5000_volatile_register,
+};
+
+static __devinit int sgtl5000_i2c_probe(struct i2c_client *client,
+					const struct i2c_device_id *id)
+{
+	struct sgtl5000_priv *sgtl5000;
+	int ret;
+
+	sgtl5000 = kzalloc(sizeof(struct sgtl5000_priv), GFP_KERNEL);
+	if (!sgtl5000)
+		return -ENOMEM;
+
+	/*
+	 * copy DAP default values to default value array.
+	 * sgtl5000 register space has a big hole, merge it
+	 * at init phase makes life easy.
+	 * FIXME: should we drop 'const' of sgtl5000_regs?
+	 */
+	memcpy((void *)(&sgtl5000_regs[0] + (SGTL5000_DAP_REG_OFFSET >> 1)),
+			sgtl5000_dap_regs,
+			SGTL5000_MAX_REG_OFFSET - SGTL5000_DAP_REG_OFFSET);
+
+	i2c_set_clientdata(client, sgtl5000);
+
+	ret = snd_soc_register_codec(&client->dev,
+			&sgtl5000_driver, &sgtl5000_dai, 1);
+	if (ret) {
+		dev_err(&client->dev, "Failed to register codec: %d\n", ret);
+		kfree(sgtl5000);
+		return ret;
+	}
+
+	return 0;
+}
+
+static __devexit int sgtl5000_i2c_remove(struct i2c_client *client)
+{
+	struct sgtl5000_priv *sgtl5000 = i2c_get_clientdata(client);
+
+	snd_soc_unregister_codec(&client->dev);
+
+	kfree(sgtl5000);
+	return 0;
+}
+
+static const struct i2c_device_id sgtl5000_id[] = {
+	{"sgtl5000", 0},
+	{},
+};
+
+MODULE_DEVICE_TABLE(i2c, sgtl5000_id);
+
+static struct i2c_driver sgtl5000_i2c_driver = {
+	.driver = {
+		   .name = "sgtl5000",
+		   .owner = THIS_MODULE,
+		   },
+	.probe = sgtl5000_i2c_probe,
+	.remove = __devexit_p(sgtl5000_i2c_remove),
+	.id_table = sgtl5000_id,
+};
+
+static int __init sgtl5000_modinit(void)
+{
+	return i2c_add_driver(&sgtl5000_i2c_driver);
+}
+module_init(sgtl5000_modinit);
+
+static void __exit sgtl5000_exit(void)
+{
+	i2c_del_driver(&sgtl5000_i2c_driver);
+}
+module_exit(sgtl5000_exit);
+
+MODULE_DESCRIPTION("Freescale SGTL5000 ALSA SoC Codec Driver");
+MODULE_AUTHOR("Zeng Zhaoming <zhaoming.zeng@freescale.com>");
+MODULE_LICENSE("GPL");
diff --git a/sound/soc/codecs/sgtl5000.h b/sound/soc/codecs/sgtl5000.h
new file mode 100644
index 00000000000..c29312ab801
--- /dev/null
+++ b/sound/soc/codecs/sgtl5000.h
@@ -0,0 +1,402 @@
+/*
+ * sgtl5000.h - SGTL5000 audio codec interface
+ *
+ * Copyright 2010-2011 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef _SGTL5000_H
+#define _SGTL5000_H
+
+#include <linux/i2c.h>
+
+/*
+ * Register values.
+ */
+#define SGTL5000_CHIP_ID			0x0000
+#define SGTL5000_CHIP_DIG_POWER			0x0002
+#define SGTL5000_CHIP_CLK_CTRL			0x0004
+#define SGTL5000_CHIP_I2S_CTRL			0x0006
+#define SGTL5000_CHIP_SSS_CTRL			0x000a
+#define SGTL5000_CHIP_ADCDAC_CTRL		0x000e
+#define SGTL5000_CHIP_DAC_VOL			0x0010
+#define SGTL5000_CHIP_PAD_STRENGTH		0x0014
+#define SGTL5000_CHIP_ANA_ADC_CTRL		0x0020
+#define SGTL5000_CHIP_ANA_HP_CTRL		0x0022
+#define SGTL5000_CHIP_ANA_CTRL			0x0024
+#define SGTL5000_CHIP_LINREG_CTRL		0x0026
+#define SGTL5000_CHIP_REF_CTRL			0x0028
+#define SGTL5000_CHIP_MIC_CTRL			0x002a
+#define SGTL5000_CHIP_LINE_OUT_CTRL		0x002c
+#define SGTL5000_CHIP_LINE_OUT_VOL		0x002e
+#define SGTL5000_CHIP_ANA_POWER			0x0030
+#define SGTL5000_CHIP_PLL_CTRL			0x0032
+#define SGTL5000_CHIP_CLK_TOP_CTRL		0x0034
+#define SGTL5000_CHIP_ANA_STATUS		0x0036
+#define SGTL5000_CHIP_SHORT_CTRL		0x003c
+#define SGTL5000_CHIP_ANA_TEST2			0x003a
+#define SGTL5000_DAP_CTRL			0x0100
+#define SGTL5000_DAP_PEQ			0x0102
+#define SGTL5000_DAP_BASS_ENHANCE		0x0104
+#define SGTL5000_DAP_BASS_ENHANCE_CTRL		0x0106
+#define SGTL5000_DAP_AUDIO_EQ			0x0108
+#define SGTL5000_DAP_SURROUND			0x010a
+#define SGTL5000_DAP_FLT_COEF_ACCESS		0x010c
+#define SGTL5000_DAP_COEF_WR_B0_MSB		0x010e
+#define SGTL5000_DAP_COEF_WR_B0_LSB		0x0110
+#define SGTL5000_DAP_EQ_BASS_BAND0		0x0116
+#define SGTL5000_DAP_EQ_BASS_BAND1		0x0118
+#define SGTL5000_DAP_EQ_BASS_BAND2		0x011a
+#define SGTL5000_DAP_EQ_BASS_BAND3		0x011c
+#define SGTL5000_DAP_EQ_BASS_BAND4		0x011e
+#define SGTL5000_DAP_MAIN_CHAN			0x0120
+#define SGTL5000_DAP_MIX_CHAN			0x0122
+#define SGTL5000_DAP_AVC_CTRL			0x0124
+#define SGTL5000_DAP_AVC_THRESHOLD		0x0126
+#define SGTL5000_DAP_AVC_ATTACK			0x0128
+#define SGTL5000_DAP_AVC_DECAY			0x012a
+#define SGTL5000_DAP_COEF_WR_B1_MSB		0x012c
+#define SGTL5000_DAP_COEF_WR_B1_LSB		0x012e
+#define SGTL5000_DAP_COEF_WR_B2_MSB		0x0130
+#define SGTL5000_DAP_COEF_WR_B2_LSB		0x0132
+#define SGTL5000_DAP_COEF_WR_A1_MSB		0x0134
+#define SGTL5000_DAP_COEF_WR_A1_LSB		0x0136
+#define SGTL5000_DAP_COEF_WR_A2_MSB		0x0138
+#define SGTL5000_DAP_COEF_WR_A2_LSB		0x013a
+
+/*
+ * Field Definitions.
+ */
+
+/*
+ * SGTL5000_CHIP_ID
+ */
+#define SGTL5000_PARTID_MASK			0xff00
+#define SGTL5000_PARTID_SHIFT			8
+#define SGTL5000_PARTID_WIDTH			8
+#define SGTL5000_PARTID_PART_ID			0xa0
+#define SGTL5000_REVID_MASK			0x00ff
+#define SGTL5000_REVID_SHIFT			0
+#define SGTL5000_REVID_WIDTH			8
+
+/*
+ * SGTL5000_CHIP_DIG_POWER
+ */
+#define SGTL5000_ADC_EN				0x0040
+#define SGTL5000_DAC_EN				0x0020
+#define SGTL5000_DAP_POWERUP			0x0010
+#define SGTL5000_I2S_OUT_POWERUP		0x0002
+#define SGTL5000_I2S_IN_POWERUP			0x0001
+
+/*
+ * SGTL5000_CHIP_CLK_CTRL
+ */
+#define SGTL5000_RATE_MODE_MASK			0x0030
+#define SGTL5000_RATE_MODE_SHIFT		4
+#define SGTL5000_RATE_MODE_WIDTH		2
+#define SGTL5000_RATE_MODE_DIV_1		0
+#define SGTL5000_RATE_MODE_DIV_2		1
+#define SGTL5000_RATE_MODE_DIV_4		2
+#define SGTL5000_RATE_MODE_DIV_6		3
+#define SGTL5000_SYS_FS_MASK			0x000c
+#define SGTL5000_SYS_FS_SHIFT			2
+#define SGTL5000_SYS_FS_WIDTH			2
+#define SGTL5000_SYS_FS_32k			0x0
+#define SGTL5000_SYS_FS_44_1k			0x1
+#define SGTL5000_SYS_FS_48k			0x2
+#define SGTL5000_SYS_FS_96k			0x3
+#define SGTL5000_MCLK_FREQ_MASK			0x0003
+#define SGTL5000_MCLK_FREQ_SHIFT		0
+#define SGTL5000_MCLK_FREQ_WIDTH		2
+#define SGTL5000_MCLK_FREQ_256FS		0x0
+#define SGTL5000_MCLK_FREQ_384FS		0x1
+#define SGTL5000_MCLK_FREQ_512FS		0x2
+#define SGTL5000_MCLK_FREQ_PLL			0x3
+
+/*
+ * SGTL5000_CHIP_I2S_CTRL
+ */
+#define SGTL5000_I2S_SCLKFREQ_MASK		0x0100
+#define SGTL5000_I2S_SCLKFREQ_SHIFT		8
+#define SGTL5000_I2S_SCLKFREQ_WIDTH		1
+#define SGTL5000_I2S_SCLKFREQ_64FS		0x0
+#define SGTL5000_I2S_SCLKFREQ_32FS		0x1	/* Not for RJ mode */
+#define SGTL5000_I2S_MASTER			0x0080
+#define SGTL5000_I2S_SCLK_INV			0x0040
+#define SGTL5000_I2S_DLEN_MASK			0x0030
+#define SGTL5000_I2S_DLEN_SHIFT			4
+#define SGTL5000_I2S_DLEN_WIDTH			2
+#define SGTL5000_I2S_DLEN_32			0x0
+#define SGTL5000_I2S_DLEN_24			0x1
+#define SGTL5000_I2S_DLEN_20			0x2
+#define SGTL5000_I2S_DLEN_16			0x3
+#define SGTL5000_I2S_MODE_MASK			0x000c
+#define SGTL5000_I2S_MODE_SHIFT			2
+#define SGTL5000_I2S_MODE_WIDTH			2
+#define SGTL5000_I2S_MODE_I2S_LJ		0x0
+#define SGTL5000_I2S_MODE_RJ			0x1
+#define SGTL5000_I2S_MODE_PCM			0x2
+#define SGTL5000_I2S_LRALIGN			0x0002
+#define SGTL5000_I2S_LRPOL			0x0001	/* set for which mode */
+
+/*
+ * SGTL5000_CHIP_SSS_CTRL
+ */
+#define SGTL5000_DAP_MIX_LRSWAP			0x4000
+#define SGTL5000_DAP_LRSWAP			0x2000
+#define SGTL5000_DAC_LRSWAP			0x1000
+#define SGTL5000_I2S_OUT_LRSWAP			0x0400
+#define SGTL5000_DAP_MIX_SEL_MASK		0x0300
+#define SGTL5000_DAP_MIX_SEL_SHIFT		8
+#define SGTL5000_DAP_MIX_SEL_WIDTH		2
+#define SGTL5000_DAP_MIX_SEL_ADC		0x0
+#define SGTL5000_DAP_MIX_SEL_I2S_IN		0x1
+#define SGTL5000_DAP_SEL_MASK			0x00c0
+#define SGTL5000_DAP_SEL_SHIFT			6
+#define SGTL5000_DAP_SEL_WIDTH			2
+#define SGTL5000_DAP_SEL_ADC			0x0
+#define SGTL5000_DAP_SEL_I2S_IN			0x1
+#define SGTL5000_DAC_SEL_MASK			0x0030
+#define SGTL5000_DAC_SEL_SHIFT			4
+#define SGTL5000_DAC_SEL_WIDTH			2
+#define SGTL5000_DAC_SEL_ADC			0x0
+#define SGTL5000_DAC_SEL_I2S_IN			0x1
+#define SGTL5000_DAC_SEL_DAP			0x3
+#define SGTL5000_I2S_OUT_SEL_MASK		0x0003
+#define SGTL5000_I2S_OUT_SEL_SHIFT		0
+#define SGTL5000_I2S_OUT_SEL_WIDTH		2
+#define SGTL5000_I2S_OUT_SEL_ADC		0x0
+#define SGTL5000_I2S_OUT_SEL_I2S_IN		0x1
+#define SGTL5000_I2S_OUT_SEL_DAP		0x3
+
+/*
+ * SGTL5000_CHIP_ADCDAC_CTRL
+ */
+#define SGTL5000_VOL_BUSY_DAC_RIGHT		0x2000
+#define SGTL5000_VOL_BUSY_DAC_LEFT		0x1000
+#define SGTL5000_DAC_VOL_RAMP_EN		0x0200
+#define SGTL5000_DAC_VOL_RAMP_EXPO		0x0100
+#define SGTL5000_DAC_MUTE_RIGHT			0x0008
+#define SGTL5000_DAC_MUTE_LEFT			0x0004
+#define SGTL5000_ADC_HPF_FREEZE			0x0002
+#define SGTL5000_ADC_HPF_BYPASS			0x0001
+
+/*
+ * SGTL5000_CHIP_DAC_VOL
+ */
+#define SGTL5000_DAC_VOL_RIGHT_MASK		0xff00
+#define SGTL5000_DAC_VOL_RIGHT_SHIFT		8
+#define SGTL5000_DAC_VOL_RIGHT_WIDTH		8
+#define SGTL5000_DAC_VOL_LEFT_MASK		0x00ff
+#define SGTL5000_DAC_VOL_LEFT_SHIFT		0
+#define SGTL5000_DAC_VOL_LEFT_WIDTH		8
+
+/*
+ * SGTL5000_CHIP_PAD_STRENGTH
+ */
+#define SGTL5000_PAD_I2S_LRCLK_MASK		0x0300
+#define SGTL5000_PAD_I2S_LRCLK_SHIFT		8
+#define SGTL5000_PAD_I2S_LRCLK_WIDTH		2
+#define SGTL5000_PAD_I2S_SCLK_MASK		0x00c0
+#define SGTL5000_PAD_I2S_SCLK_SHIFT		6
+#define SGTL5000_PAD_I2S_SCLK_WIDTH		2
+#define SGTL5000_PAD_I2S_DOUT_MASK		0x0030
+#define SGTL5000_PAD_I2S_DOUT_SHIFT		4
+#define SGTL5000_PAD_I2S_DOUT_WIDTH		2
+#define SGTL5000_PAD_I2C_SDA_MASK		0x000c
+#define SGTL5000_PAD_I2C_SDA_SHIFT		2
+#define SGTL5000_PAD_I2C_SDA_WIDTH		2
+#define SGTL5000_PAD_I2C_SCL_MASK		0x0003
+#define SGTL5000_PAD_I2C_SCL_SHIFT		0
+#define SGTL5000_PAD_I2C_SCL_WIDTH		2
+
+/*
+ * SGTL5000_CHIP_ANA_ADC_CTRL
+ */
+#define SGTL5000_ADC_VOL_M6DB			0x0100
+#define SGTL5000_ADC_VOL_RIGHT_MASK		0x00f0
+#define SGTL5000_ADC_VOL_RIGHT_SHIFT		4
+#define SGTL5000_ADC_VOL_RIGHT_WIDTH		4
+#define SGTL5000_ADC_VOL_LEFT_MASK		0x000f
+#define SGTL5000_ADC_VOL_LEFT_SHIFT		0
+#define SGTL5000_ADC_VOL_LEFT_WIDTH		4
+
+/*
+ * SGTL5000_CHIP_ANA_HP_CTRL
+ */
+#define SGTL5000_HP_VOL_RIGHT_MASK		0x7f00
+#define SGTL5000_HP_VOL_RIGHT_SHIFT		8
+#define SGTL5000_HP_VOL_RIGHT_WIDTH		7
+#define SGTL5000_HP_VOL_LEFT_MASK		0x007f
+#define SGTL5000_HP_VOL_LEFT_SHIFT		0
+#define SGTL5000_HP_VOL_LEFT_WIDTH		7
+
+/*
+ * SGTL5000_CHIP_ANA_CTRL
+ */
+#define SGTL5000_LINE_OUT_MUTE			0x0100
+#define SGTL5000_HP_SEL_MASK			0x0040
+#define SGTL5000_HP_SEL_SHIFT			6
+#define SGTL5000_HP_SEL_WIDTH			1
+#define SGTL5000_HP_SEL_DAC			0x0
+#define SGTL5000_HP_SEL_LINE_IN			0x1
+#define SGTL5000_HP_ZCD_EN			0x0020
+#define SGTL5000_HP_MUTE			0x0010
+#define SGTL5000_ADC_SEL_MASK			0x0004
+#define SGTL5000_ADC_SEL_SHIFT			2
+#define SGTL5000_ADC_SEL_WIDTH			1
+#define SGTL5000_ADC_SEL_MIC			0x0
+#define SGTL5000_ADC_SEL_LINE_IN		0x1
+#define SGTL5000_ADC_ZCD_EN			0x0002
+#define SGTL5000_ADC_MUTE			0x0001
+
+/*
+ * SGTL5000_CHIP_LINREG_CTRL
+ */
+#define SGTL5000_VDDC_MAN_ASSN_MASK		0x0040
+#define SGTL5000_VDDC_MAN_ASSN_SHIFT		6
+#define SGTL5000_VDDC_MAN_ASSN_WIDTH		1
+#define SGTL5000_VDDC_MAN_ASSN_VDDA		0x0
+#define SGTL5000_VDDC_MAN_ASSN_VDDIO		0x1
+#define SGTL5000_VDDC_ASSN_OVRD			0x0020
+#define SGTL5000_LINREG_VDDD_MASK		0x000f
+#define SGTL5000_LINREG_VDDD_SHIFT		0
+#define SGTL5000_LINREG_VDDD_WIDTH		4
+
+/*
+ * SGTL5000_CHIP_REF_CTRL
+ */
+#define SGTL5000_ANA_GND_MASK			0x01f0
+#define SGTL5000_ANA_GND_SHIFT			4
+#define SGTL5000_ANA_GND_WIDTH			5
+#define SGTL5000_ANA_GND_BASE			800	/* mv */
+#define SGTL5000_ANA_GND_STP			25	/*mv */
+#define SGTL5000_BIAS_CTRL_MASK			0x000e
+#define SGTL5000_BIAS_CTRL_SHIFT		1
+#define SGTL5000_BIAS_CTRL_WIDTH		3
+#define SGTL5000_SMALL_POP			0x0001
+
+/*
+ * SGTL5000_CHIP_MIC_CTRL
+ */
+#define SGTL5000_BIAS_R_MASK			0x0200
+#define SGTL5000_BIAS_R_SHIFT			8
+#define SGTL5000_BIAS_R_WIDTH			2
+#define SGTL5000_BIAS_R_off			0x0
+#define SGTL5000_BIAS_R_2K			0x1
+#define SGTL5000_BIAS_R_4k			0x2
+#define SGTL5000_BIAS_R_8k			0x3
+#define SGTL5000_BIAS_VOLT_MASK			0x0070
+#define SGTL5000_BIAS_VOLT_SHIFT		4
+#define SGTL5000_BIAS_VOLT_WIDTH		3
+#define SGTL5000_MIC_GAIN_MASK			0x0003
+#define SGTL5000_MIC_GAIN_SHIFT			0
+#define SGTL5000_MIC_GAIN_WIDTH			2
+
+/*
+ * SGTL5000_CHIP_LINE_OUT_CTRL
+ */
+#define SGTL5000_LINE_OUT_CURRENT_MASK		0x0f00
+#define SGTL5000_LINE_OUT_CURRENT_SHIFT		8
+#define SGTL5000_LINE_OUT_CURRENT_WIDTH		4
+#define SGTL5000_LINE_OUT_CURRENT_180u		0x0
+#define SGTL5000_LINE_OUT_CURRENT_270u		0x1
+#define SGTL5000_LINE_OUT_CURRENT_360u		0x3
+#define SGTL5000_LINE_OUT_CURRENT_450u		0x7
+#define SGTL5000_LINE_OUT_CURRENT_540u		0xf
+#define SGTL5000_LINE_OUT_GND_MASK		0x003f
+#define SGTL5000_LINE_OUT_GND_SHIFT		0
+#define SGTL5000_LINE_OUT_GND_WIDTH		6
+#define SGTL5000_LINE_OUT_GND_BASE		800	/* mv */
+#define SGTL5000_LINE_OUT_GND_STP		25
+#define SGTL5000_LINE_OUT_GND_MAX		0x23
+
+/*
+ * SGTL5000_CHIP_LINE_OUT_VOL
+ */
+#define SGTL5000_LINE_OUT_VOL_RIGHT_MASK	0x1f00
+#define SGTL5000_LINE_OUT_VOL_RIGHT_SHIFT	8
+#define SGTL5000_LINE_OUT_VOL_RIGHT_WIDTH	5
+#define SGTL5000_LINE_OUT_VOL_LEFT_MASK		0x001f
+#define SGTL5000_LINE_OUT_VOL_LEFT_SHIFT	0
+#define SGTL5000_LINE_OUT_VOL_LEFT_WIDTH	5
+
+/*
+ * SGTL5000_CHIP_ANA_POWER
+ */
+#define SGTL5000_DAC_STEREO			0x4000
+#define SGTL5000_LINREG_SIMPLE_POWERUP		0x2000
+#define SGTL5000_STARTUP_POWERUP		0x1000
+#define SGTL5000_VDDC_CHRGPMP_POWERUP		0x0800
+#define SGTL5000_PLL_POWERUP			0x0400
+#define SGTL5000_LINEREG_D_POWERUP		0x0200
+#define SGTL5000_VCOAMP_POWERUP			0x0100
+#define SGTL5000_VAG_POWERUP			0x0080
+#define SGTL5000_ADC_STEREO			0x0040
+#define SGTL5000_REFTOP_POWERUP			0x0020
+#define SGTL5000_HP_POWERUP			0x0010
+#define SGTL5000_DAC_POWERUP			0x0008
+#define SGTL5000_CAPLESS_HP_POWERUP		0x0004
+#define SGTL5000_ADC_POWERUP			0x0002
+#define SGTL5000_LINE_OUT_POWERUP		0x0001
+
+/*
+ * SGTL5000_CHIP_PLL_CTRL
+ */
+#define SGTL5000_PLL_INT_DIV_MASK		0xf800
+#define SGTL5000_PLL_INT_DIV_SHIFT		11
+#define SGTL5000_PLL_INT_DIV_WIDTH		5
+#define SGTL5000_PLL_FRAC_DIV_MASK		0x0700
+#define SGTL5000_PLL_FRAC_DIV_SHIFT		0
+#define SGTL5000_PLL_FRAC_DIV_WIDTH		11
+
+/*
+ * SGTL5000_CHIP_CLK_TOP_CTRL
+ */
+#define SGTL5000_INT_OSC_EN			0x0800
+#define SGTL5000_INPUT_FREQ_DIV2		0x0008
+
+/*
+ * SGTL5000_CHIP_ANA_STATUS
+ */
+#define SGTL5000_HP_LRSHORT			0x0200
+#define SGTL5000_CAPLESS_SHORT			0x0100
+#define SGTL5000_PLL_LOCKED			0x0010
+
+/*
+ * SGTL5000_CHIP_SHORT_CTRL
+ */
+#define SGTL5000_LVLADJR_MASK			0x7000
+#define SGTL5000_LVLADJR_SHIFT			12
+#define SGTL5000_LVLADJR_WIDTH			3
+#define SGTL5000_LVLADJL_MASK			0x0700
+#define SGTL5000_LVLADJL_SHIFT			8
+#define SGTL5000_LVLADJL_WIDTH			3
+#define SGTL5000_LVLADJC_MASK			0x0070
+#define SGTL5000_LVLADJC_SHIFT			4
+#define SGTL5000_LVLADJC_WIDTH			3
+#define SGTL5000_LR_SHORT_MOD_MASK		0x000c
+#define SGTL5000_LR_SHORT_MOD_SHIFT		2
+#define SGTL5000_LR_SHORT_MOD_WIDTH		2
+#define SGTL5000_CM_SHORT_MOD_MASK		0x0003
+#define SGTL5000_CM_SHORT_MOD_SHIFT		0
+#define SGTL5000_CM_SHORT_MOD_WIDTH		2
+
+/*
+ *SGTL5000_CHIP_ANA_TEST2
+ */
+#define SGTL5000_MONO_DAC			0x1000
+
+/*
+ * SGTL5000_DAP_CTRL
+ */
+#define SGTL5000_DAP_MIX_EN			0x0010
+#define SGTL5000_DAP_EN				0x0001
+
+#define SGTL5000_SYSCLK				0x00
+#define SGTL5000_LRCLK				0x01
+
+#endif