[ALSA] Add echoaudio sound drivers

Add echoaudio sound drivers (darla20, darla24, echo3g, gina20, gina24,
indigo, indigodj, indigoio, layla20, lala24, mia, mona)

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
Signed-off-by: Adrian Bunk <bunk@stusta.de>

1 files changed, 590 insertions, 0 deletions

diff --git a/sound/pci/echoaudio/echoaudio.h b/sound/pci/echoaudio/echoaudio.h
new file mode 100644
index 00000000000..7e88c968e22
--- /dev/null
+++ b/sound/pci/echoaudio/echoaudio.h
@@ -0,0 +1,590 @@
+/****************************************************************************
+
+   Copyright Echo Digital Audio Corporation (c) 1998 - 2004
+   All rights reserved
+   www.echoaudio.com
+
+   This file is part of Echo Digital Audio's generic driver library.
+
+   Echo Digital Audio's generic driver library is free software;
+   you can redistribute it and/or modify it under the terms of
+   the GNU General Public License as published by the Free Software
+   Foundation.
+
+   This program is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with this program; if not, write to the Free Software
+   Foundation, Inc., 59 Temple Place - Suite 330, Boston,
+   MA  02111-1307, USA.
+
+ ****************************************************************************
+
+ Translation from C++ and adaptation for use in ALSA-Driver
+ were made by Giuliano Pochini <pochini@shiny.it>
+
+ ****************************************************************************
+
+
+   Here's a block diagram of how most of the cards work:
+
+                  +-----------+
+           record |           |<-------------------- Inputs
+          <-------|           |        |
+     PCI          | Transport |        |
+     bus          |  engine   |       \|/
+          ------->|           |    +-------+
+            play  |           |--->|monitor|-------> Outputs
+                  +-----------+    | mixer |
+                                   +-------+
+
+   The lines going to and from the PCI bus represent "pipes".  A pipe performs
+   audio transport - moving audio data to and from buffers on the host via
+   bus mastering.
+
+   The inputs and outputs on the right represent input and output "busses."
+   A bus is a physical, real connection to the outside world.  An example
+   of a bus would be the 1/4" analog connectors on the back of Layla or
+   an RCA S/PDIF connector.
+
+   For most cards, there is a one-to-one correspondence between outputs
+   and busses; that is, each individual pipe is hard-wired to a single bus.
+
+   Cards that work this way are Darla20, Gina20, Layla20, Darla24, Gina24,
+   Layla24, Mona, and Indigo.
+
+
+   Mia has a feature called "virtual outputs."
+
+
+                  +-----------+
+           record |           |<----------------------------- Inputs
+          <-------|           |                  |
+     PCI          | Transport |                  |
+     bus          |  engine   |                 \|/
+          ------->|           |   +------+   +-------+
+            play  |           |-->|vmixer|-->|monitor|-------> Outputs
+                  +-----------+   +------+   | mixer |
+                                             +-------+
+
+
+   Obviously, the difference here is the box labeled "vmixer."  Vmixer is
+   short for "virtual output mixer."  For Mia, pipes are *not* hard-wired
+   to a single bus; the vmixer lets you mix any pipe to any bus in any
+   combination.
+
+   Note, however, that the left-hand side of the diagram is unchanged.
+   Transport works exactly the same way - the difference is in the mixer stage.
+
+
+   Pipes and busses are numbered starting at zero.
+
+
+
+   Pipe index
+   ==========
+
+   A number of calls in CEchoGals refer to a "pipe index".  A pipe index is
+   a unique number for a pipe that unambiguously refers to a playback or record
+   pipe.  Pipe indices are numbered starting with analog outputs, followed by
+   digital outputs, then analog inputs, then digital inputs.
+
+   Take Gina24 as an example:
+
+   Pipe index
+
+   0-7            Analog outputs (0 .. FirstDigitalBusOut-1)
+   8-15           Digital outputs (FirstDigitalBusOut .. NumBussesOut-1)
+   16-17          Analog inputs
+   18-25          Digital inputs
+
+
+   You get the pipe index by calling CEchoGals::OpenAudio; the other transport
+   functions take the pipe index as a parameter.  If you need a pipe index for
+   some other reason, use the handy Makepipe_index method.
+
+
+   Some calls take a CChannelMask parameter; CChannelMask is a handy way to
+   group pipe indices.
+
+
+
+   Digital mode switch
+   ===================
+
+   Some cards (right now, Gina24, Layla24, and Mona) have a Digital Mode Switch
+   or DMS.  Cards with a DMS can be set to one of three mutually exclusive
+   digital modes: S/PDIF RCA, S/PDIF optical, or ADAT optical.
+
+   This may create some confusion since ADAT optical is 8 channels wide and
+   S/PDIF is only two channels wide.  Gina24, Layla24, and Mona handle this
+   by acting as if they always have 8 digital outs and ins.  If you are in
+   either S/PDIF mode, the last 6 channels don't do anything - data sent
+   out these channels is thrown away and you will always record zeros.
+
+   Note that with Gina24, Layla24, and Mona, sample rates above 50 kHz are
+   only available if you have the card configured for S/PDIF optical or S/PDIF
+   RCA.
+
+
+
+   Double speed mode
+   =================
+
+   Some of the cards support 88.2 kHz and 96 kHz sampling (Darla24, Gina24,
+   Layla24, Mona, Mia, and Indigo).  For these cards, the driver sometimes has
+   to worry about "double speed mode"; double speed mode applies whenever the
+   sampling rate is above 50 kHz.
+
+   For instance, Mona and Layla24 support word clock sync.  However, they
+   actually support two different word clock modes - single speed (below
+   50 kHz) and double speed (above 50 kHz).  The hardware detects if a single
+   or double speed word clock signal is present; the generic code uses that
+   information to determine which mode to use.
+
+   The generic code takes care of all this for you.
+*/
+
+
+#ifndef _ECHOAUDIO_H_
+#define _ECHOAUDIO_H_
+
+
+#define TRUE 1
+#define FALSE 0
+
+#include "echoaudio_dsp.h"
+
+
+
+/***********************************************************************
+
+	PCI configuration space
+
+***********************************************************************/
+
+/*
+ * PCI vendor ID and device IDs for the hardware
+ */
+#define VENDOR_ID		0x1057
+#define DEVICE_ID_56301		0x1801
+#define DEVICE_ID_56361		0x3410
+#define SUBVENDOR_ID		0xECC0
+
+
+/*
+ * Valid Echo PCI subsystem card IDs
+ */
+#define DARLA20			0x0010
+#define GINA20			0x0020
+#define LAYLA20			0x0030
+#define DARLA24			0x0040
+#define GINA24			0x0050
+#define LAYLA24			0x0060
+#define MONA			0x0070
+#define MIA			0x0080
+#define INDIGO			0x0090
+#define INDIGO_IO		0x00a0
+#define INDIGO_DJ		0x00b0
+#define ECHO3G			0x0100
+
+
+/************************************************************************
+
+	Array sizes and so forth
+
+***********************************************************************/
+
+/*
+ * Sizes
+ */
+#define ECHO_MAXAUDIOINPUTS	32	/* Max audio input channels */
+#define ECHO_MAXAUDIOOUTPUTS	32	/* Max audio output channels */
+#define ECHO_MAXAUDIOPIPES	32	/* Max number of input and output
+					 * pipes */
+#define E3G_MAX_OUTPUTS		16
+#define ECHO_MAXMIDIJACKS	1	/* Max MIDI ports */
+#define ECHO_MIDI_QUEUE_SZ 	512	/* Max MIDI input queue entries */
+#define ECHO_MTC_QUEUE_SZ	32	/* Max MIDI time code input queue
+					 * entries */
+
+/*
+ * MIDI activity indicator timeout
+ */
+#define MIDI_ACTIVITY_TIMEOUT_USEC	200000
+
+
+/****************************************************************************
+ 
+   Clocks
+
+*****************************************************************************/
+
+/*
+ * Clock numbers
+ */
+#define ECHO_CLOCK_INTERNAL		0
+#define ECHO_CLOCK_WORD			1
+#define ECHO_CLOCK_SUPER		2
+#define ECHO_CLOCK_SPDIF		3
+#define ECHO_CLOCK_ADAT			4
+#define ECHO_CLOCK_ESYNC		5
+#define ECHO_CLOCK_ESYNC96		6
+#define ECHO_CLOCK_MTC			7
+#define ECHO_CLOCK_NUMBER		8
+#define ECHO_CLOCKS			0xffff
+
+/*
+ * Clock bit numbers - used to report capabilities and whatever clocks
+ * are being detected dynamically.
+ */
+#define ECHO_CLOCK_BIT_INTERNAL		(1 << ECHO_CLOCK_INTERNAL)
+#define ECHO_CLOCK_BIT_WORD		(1 << ECHO_CLOCK_WORD)
+#define ECHO_CLOCK_BIT_SUPER		(1 << ECHO_CLOCK_SUPER)
+#define ECHO_CLOCK_BIT_SPDIF		(1 << ECHO_CLOCK_SPDIF)
+#define ECHO_CLOCK_BIT_ADAT		(1 << ECHO_CLOCK_ADAT)
+#define ECHO_CLOCK_BIT_ESYNC		(1 << ECHO_CLOCK_ESYNC)
+#define ECHO_CLOCK_BIT_ESYNC96		(1 << ECHO_CLOCK_ESYNC96)
+#define ECHO_CLOCK_BIT_MTC		(1<<ECHO_CLOCK_MTC)
+
+
+/***************************************************************************
+
+   Digital modes
+
+****************************************************************************/
+
+/*
+ * Digital modes for Mona, Layla24, and Gina24
+ */
+#define DIGITAL_MODE_NONE			0xFF
+#define DIGITAL_MODE_SPDIF_RCA			0
+#define DIGITAL_MODE_SPDIF_OPTICAL		1
+#define DIGITAL_MODE_ADAT			2
+#define DIGITAL_MODE_SPDIF_CDROM		3
+#define DIGITAL_MODES				4
+
+/*
+ * Digital mode capability masks
+ */
+#define ECHOCAPS_HAS_DIGITAL_MODE_SPDIF_RCA	(1 << DIGITAL_MODE_SPDIF_RCA)
+#define ECHOCAPS_HAS_DIGITAL_MODE_SPDIF_OPTICAL	(1 << DIGITAL_MODE_SPDIF_OPTICAL)
+#define ECHOCAPS_HAS_DIGITAL_MODE_ADAT		(1 << DIGITAL_MODE_ADAT)
+#define ECHOCAPS_HAS_DIGITAL_MODE_SPDIF_CDROM	(1 << DIGITAL_MODE_SPDIF_CDROM)
+
+
+#define EXT_3GBOX_NC			0x01	/* 3G box not connected */
+#define EXT_3GBOX_NOT_SET		0x02	/* 3G box not detected yet */
+
+
+#define ECHOGAIN_MUTED		(-128)	/* Minimum possible gain */
+#define ECHOGAIN_MINOUT		(-128)	/* Min output gain (dB) */
+#define ECHOGAIN_MAXOUT		(6)	/* Max output gain (dB) */
+#define ECHOGAIN_MININP		(-50)	/* Min input gain (0.5 dB) */
+#define ECHOGAIN_MAXINP		(50)	/* Max input gain (0.5 dB) */
+
+#define PIPE_STATE_STOPPED	0	/* Pipe has been reset */
+#define PIPE_STATE_PAUSED	1	/* Pipe has been stopped */
+#define PIPE_STATE_STARTED	2	/* Pipe has been started */
+#define PIPE_STATE_PENDING	3	/* Pipe has pending start */
+
+
+/* Debug initialization */
+#ifdef CONFIG_SND_DEBUG
+#define DE_INIT(x) snd_printk x
+#else
+#define DE_INIT(x)
+#endif
+
+/* Debug hw_params callbacks */
+#ifdef CONFIG_SND_DEBUG
+#define DE_HWP(x) snd_printk x
+#else
+#define DE_HWP(x)
+#endif
+
+/* Debug normal activity (open, start, stop...) */
+#ifdef CONFIG_SND_DEBUG
+#define DE_ACT(x) snd_printk x
+#else
+#define DE_ACT(x)
+#endif
+
+/* Debug midi activity */
+#ifdef CONFIG_SND_DEBUG
+#define DE_MID(x) snd_printk x
+#else
+#define DE_MID(x)
+#endif
+
+
+struct audiopipe {
+	volatile u32 *dma_counter;	/* Commpage register that contains
+					 * the current dma position
+					 * (lower 32 bits only)
+					 */
+	u32 last_counter;		/* The last position, which is used
+					 * to compute...
+					 */
+	u32 position;			/* ...the number of bytes tranferred
+					 * by the DMA engine, modulo the
+					 * buffer size
+					 */
+	short index;			/* Index of the first channel or <0
+					 * if hw is not configured yet
+					 */
+	short interleave;
+	struct snd_dma_buffer sgpage;	/* Room for the scatter-gather list */
+	struct snd_pcm_hardware hw;
+	struct snd_pcm_hw_constraint_list constr;
+	short sglist_head;
+	char state;			/* pipe state */
+};
+
+
+struct audioformat {
+	u8 interleave;			/* How the data is arranged in memory:
+					 * mono = 1, stereo = 2, ...
+					 */
+	u8 bits_per_sample;		/* 8, 16, 24, 32 (24 bits left aligned) */
+	char mono_to_stereo;		/* Only used if interleave is 1 and
+					 * if this is an output pipe.
+					 */
+	char data_are_bigendian;	/* 1 = big endian, 0 = little endian */
+};
+
+
+struct echoaudio {
+	spinlock_t lock;
+	struct snd_pcm_substream *substream[DSP_MAXPIPES];
+	int last_period[DSP_MAXPIPES];
+	struct semaphore mode_mutex;
+	u16 num_digital_modes, digital_mode_list[6];
+	u16 num_clock_sources, clock_source_list[10];
+	atomic_t opencount;
+	struct snd_kcontrol *clock_src_ctl;
+	struct snd_pcm *analog_pcm, *digital_pcm;
+	struct snd_card *card;
+	const char *card_name;
+	struct pci_dev *pci;
+	unsigned long dsp_registers_phys;
+	struct resource *iores;
+	struct snd_dma_buffer commpage_dma_buf;
+	int irq;
+#ifdef ECHOCARD_HAS_MIDI
+	struct snd_rawmidi *rmidi;
+	struct snd_rawmidi_substream *midi_in, *midi_out;
+#endif
+	struct timer_list timer;
+	char tinuse;				/* Timer in use */
+	char midi_full;				/* MIDI output buffer is full */
+	char can_set_rate;
+	char rate_set;
+
+	/* This stuff is used mainly by the lowlevel code */
+	struct comm_page *comm_page;	/* Virtual address of the memory
+					 * seen by DSP
+					 */
+	u32 pipe_alloc_mask;		/* Bitmask of allocated pipes */
+	u32 pipe_cyclic_mask;		/* Bitmask of pipes with cyclic
+					 * buffers
+					 */
+	u32 sample_rate;		/* Card sample rate in Hz */
+	u8 digital_mode;		/* Current digital mode
+					 * (see DIGITAL_MODE_*)
+					 */
+	u8 spdif_status;		/* Gina20, Darla20, Darla24 - only */
+	u8 clock_state;			/* Gina20, Darla20, Darla24 - only */
+	u8 input_clock;			/* Currently selected sample clock
+					 * source
+					 */
+	u8 output_clock;		/* Layla20 only */
+	char meters_enabled;		/* VU-meters status */
+	char asic_loaded;		/* Set TRUE when ASIC loaded */
+	char bad_board;			/* Set TRUE if DSP won't load */
+	char professional_spdif;	/* 0 = consumer; 1 = professional */
+	char non_audio_spdif;		/* 3G - only */
+	char digital_in_automute;	/* Gina24, Layla24, Mona - only */
+	char has_phantom_power;
+	char hasnt_input_nominal_level;	/* Gina3G */
+	char phantom_power;		/* Gina3G - only */
+	char has_midi;
+	char midi_input_enabled;
+
+#ifdef ECHOCARD_ECHO3G
+	/* External module -dependent pipe and bus indexes */
+	char px_digital_out, px_analog_in, px_digital_in, px_num;
+	char bx_digital_out, bx_analog_in, bx_digital_in, bx_num;
+#endif
+
+	char nominal_level[ECHO_MAXAUDIOPIPES];	/* True == -10dBV
+						 * False == +4dBu */
+	s8 input_gain[ECHO_MAXAUDIOINPUTS];	/* Input level -50..+50
+						 * unit is 0.5dB */
+	s8 output_gain[ECHO_MAXAUDIOOUTPUTS];	/* Output level -128..+6 dB
+						 * (-128=muted) */
+	s8 monitor_gain[ECHO_MAXAUDIOOUTPUTS][ECHO_MAXAUDIOINPUTS];
+		/* -128..+6 dB */
+	s8 vmixer_gain[ECHO_MAXAUDIOOUTPUTS][ECHO_MAXAUDIOOUTPUTS];
+		/* -128..+6 dB */
+
+	u16 digital_modes;		/* Bitmask of supported modes
+					 * (see ECHOCAPS_HAS_DIGITAL_MODE_*) */
+	u16 input_clock_types;		/* Suppoted input clock types */
+	u16 output_clock_types;		/* Suppoted output clock types -
+					 * Layla20 only */
+	u16 device_id, subdevice_id;
+	u16 *dsp_code;			/* Current DSP code loaded,
+					 * NULL if nothing loaded */
+	const struct firmware *dsp_code_to_load;/* DSP code to load */
+	const struct firmware *asic_code;	/* Current ASIC code */
+	u32 comm_page_phys;			/* Physical address of the
+						 * memory seen by DSP */
+	volatile u32 __iomem *dsp_registers;	/* DSP's register base */
+	u32 active_mask;			/* Chs. active mask or
+						 * punks out */
+
+#ifdef ECHOCARD_HAS_MIDI
+	u16 mtc_state;				/* State for MIDI input parsing state machine */
+	u8 midi_buffer[MIDI_IN_BUFFER_SIZE];
+#endif
+};
+
+
+static int init_dsp_comm_page(struct echoaudio *chip);
+static int init_line_levels(struct echoaudio *chip);
+static int free_pipes(struct echoaudio *chip, struct audiopipe *pipe);
+static int load_firmware(struct echoaudio *chip);
+static int wait_handshake(struct echoaudio *chip);
+static int send_vector(struct echoaudio *chip, u32 command);
+static int get_firmware(const struct firmware **fw_entry,
+			const struct firmware *frm, struct echoaudio *chip);
+static void free_firmware(const struct firmware *fw_entry);
+
+#ifdef ECHOCARD_HAS_MIDI
+static int enable_midi_input(struct echoaudio *chip, char enable);
+static int midi_service_irq(struct echoaudio *chip);
+static int __devinit snd_echo_midi_create(struct snd_card *card,
+					  struct echoaudio *chip);
+#endif
+
+
+static inline void clear_handshake(struct echoaudio *chip)
+{
+	chip->comm_page->handshake = 0;
+}
+
+static inline u32 get_dsp_register(struct echoaudio *chip, u32 index)
+{
+	return readl(&chip->dsp_registers[index]);
+}
+
+static inline void set_dsp_register(struct echoaudio *chip, u32 index,
+				    u32 value)
+{
+	writel(value, &chip->dsp_registers[index]);
+}
+
+
+/* Pipe and bus indexes. PX_* and BX_* are defined as chip->px_* and chip->bx_*
+for 3G cards because they depend on the external box. They are integer
+constants for all other cards.
+Never use those defines directly, use the following functions instead. */
+
+static inline int px_digital_out(const struct echoaudio *chip)
+{
+	return PX_DIGITAL_OUT;
+}
+
+static inline int px_analog_in(const struct echoaudio *chip)
+{
+	return PX_ANALOG_IN;
+}
+
+static inline int px_digital_in(const struct echoaudio *chip)
+{
+	return PX_DIGITAL_IN;
+}
+
+static inline int px_num(const struct echoaudio *chip)
+{
+	return PX_NUM;
+}
+
+static inline int bx_digital_out(const struct echoaudio *chip)
+{
+	return BX_DIGITAL_OUT;
+}
+
+static inline int bx_analog_in(const struct echoaudio *chip)
+{
+	return BX_ANALOG_IN;
+}
+
+static inline int bx_digital_in(const struct echoaudio *chip)
+{
+	return BX_DIGITAL_IN;
+}
+
+static inline int bx_num(const struct echoaudio *chip)
+{
+	return BX_NUM;
+}
+
+static inline int num_pipes_out(const struct echoaudio *chip)
+{
+	return px_analog_in(chip);
+}
+
+static inline int num_pipes_in(const struct echoaudio *chip)
+{
+	return px_num(chip) - px_analog_in(chip);
+}
+
+static inline int num_busses_out(const struct echoaudio *chip)
+{
+	return bx_analog_in(chip);
+}
+
+static inline int num_busses_in(const struct echoaudio *chip)
+{
+	return bx_num(chip) - bx_analog_in(chip);
+}
+
+static inline int num_analog_busses_out(const struct echoaudio *chip)
+{
+	return bx_digital_out(chip);
+}
+
+static inline int num_analog_busses_in(const struct echoaudio *chip)
+{
+	return bx_digital_in(chip) - bx_analog_in(chip);
+}
+
+static inline int num_digital_busses_out(const struct echoaudio *chip)
+{
+	return num_busses_out(chip) - num_analog_busses_out(chip);
+}
+
+static inline int num_digital_busses_in(const struct echoaudio *chip)
+{
+	return num_busses_in(chip) - num_analog_busses_in(chip);
+}
+
+/* The monitor array is a one-dimensional array; compute the offset
+ * into the array */
+static inline int monitor_index(const struct echoaudio *chip, int out, int in)
+{
+	return out * num_busses_in(chip) + in;
+}
+
+
+#ifndef pci_device
+#define pci_device(chip) (&chip->pci->dev)
+#endif
+
+
+#endif /* _ECHOAUDIO_H_ */