Merge master.kernel.org:/pub/scm/linux/kernel/git/perex/alsa

* master.kernel.org:/pub/scm/linux/kernel/git/perex/alsa:
  [ALSA] echoaudio - Remove kfree_nocheck()
  [ALSA] echoaudio - Fix Makefile
  [ALSA] Add Intel D965 board support
  [ALSA] Fix/add support of Realtek ALC883 / ALC888 and ALC861 codecs
  [ALSA] Fix a typo in echoaudio/midi.c
  [ALSA] snd-aoa: enable dual-edge in GPIOs
  [ALSA] snd-aoa: support iMac G5 iSight
  [ALSA] snd-aoa: not experimental
  [ALSA] Add echoaudio sound drivers
  [ALSA] ak4xxx-adda - Code clean-up
  [ALSA] Remove CONFIG_EXPERIMENTAL from intel8x0m driver
  [ALSA] Stereo controls for M-Audio Revolution cards
  [ALSA] Fix misuse of __list_add() in seq_ports.c
  [ALSA] hda-codec - Add model entry for Samsung X60 Chane
  [ALSA] make CONFIG_SND_DYNAMIC_MINORS non-experimental
  [ALSA] Fix wrong dependencies of snd-aoa driver
  [ALSA] fix build failure due to snd-aoa
  [ALSA] AD1888 mixer controls for DC mode
  [ALSA] Suppress irq handler mismatch messages in ALSA ISA drivers
  [ALSA] usb-audio support for Turtle Beach Roadie

1 files changed, 156 insertions, 0 deletions

diff --git a/sound/pci/echoaudio/darla24_dsp.c b/sound/pci/echoaudio/darla24_dsp.c
new file mode 100644
index 00000000000..79938eed7e9
--- /dev/null
+++ b/sound/pci/echoaudio/darla24_dsp.c
@@ -0,0 +1,156 @@
+/***************************************************************************
+
+   Copyright Echo Digital Audio Corporation (c) 1998 - 2004
+   All rights reserved
+   www.echoaudio.com
+
+   This file is part of Echo Digital Audio's generic driver library.
+
+   Echo Digital Audio's generic driver library is free software;
+   you can redistribute it and/or modify it under the terms of
+   the GNU General Public License as published by the Free Software
+   Foundation.
+
+   This program is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with this program; if not, write to the Free Software
+   Foundation, Inc., 59 Temple Place - Suite 330, Boston,
+   MA  02111-1307, USA.
+
+   *************************************************************************
+
+ Translation from C++ and adaptation for use in ALSA-Driver
+ were made by Giuliano Pochini <pochini@shiny.it>
+
+****************************************************************************/
+
+
+static int init_hw(struct echoaudio *chip, u16 device_id, u16 subdevice_id)
+{
+	int err;
+
+	DE_INIT(("init_hw() - Darla24\n"));
+	snd_assert((subdevice_id & 0xfff0) == DARLA24, return -ENODEV);
+
+	if ((err = init_dsp_comm_page(chip))) {
+		DE_INIT(("init_hw - could not initialize DSP comm page\n"));
+		return err;
+	}
+
+	chip->device_id = device_id;
+	chip->subdevice_id = subdevice_id;
+	chip->bad_board = TRUE;
+	chip->dsp_code_to_load = &card_fw[FW_DARLA24_DSP];
+	/* Since this card has no ASIC, mark it as loaded so everything
+	   works OK */
+	chip->asic_loaded = TRUE;
+	chip->input_clock_types = ECHO_CLOCK_BIT_INTERNAL |
+		ECHO_CLOCK_BIT_ESYNC;
+
+	if ((err = load_firmware(chip)) < 0)
+		return err;
+	chip->bad_board = FALSE;
+
+	if ((err = init_line_levels(chip)) < 0)
+		return err;
+
+	DE_INIT(("init_hw done\n"));
+	return err;
+}
+
+
+
+static u32 detect_input_clocks(const struct echoaudio *chip)
+{
+	u32 clocks_from_dsp, clock_bits;
+
+	/* Map the DSP clock detect bits to the generic driver clock
+	   detect bits */
+	clocks_from_dsp = le32_to_cpu(chip->comm_page->status_clocks);
+
+	clock_bits = ECHO_CLOCK_BIT_INTERNAL;
+
+	if (clocks_from_dsp & GLDM_CLOCK_DETECT_BIT_ESYNC)
+		clock_bits |= ECHO_CLOCK_BIT_ESYNC;
+
+	return clock_bits;
+}
+
+
+
+/* The Darla24 has no ASIC. Just do nothing */
+static int load_asic(struct echoaudio *chip)
+{
+	return 0;
+}
+
+
+
+static int set_sample_rate(struct echoaudio *chip, u32 rate)
+{
+	u8 clock;
+
+	switch (rate) {
+	case 96000:
+		clock = GD24_96000;
+		break;
+	case 88200:
+		clock = GD24_88200;
+		break;
+	case 48000:
+		clock = GD24_48000;
+		break;
+	case 44100:
+		clock = GD24_44100;
+		break;
+	case 32000:
+		clock = GD24_32000;
+		break;
+	case 22050:
+		clock = GD24_22050;
+		break;
+	case 16000:
+		clock = GD24_16000;
+		break;
+	case 11025:
+		clock = GD24_11025;
+		break;
+	case 8000:
+		clock = GD24_8000;
+		break;
+	default:
+		DE_ACT(("set_sample_rate: Error, invalid sample rate %d\n",
+			rate));
+		return -EINVAL;
+	}
+
+	if (wait_handshake(chip))
+		return -EIO;
+
+	DE_ACT(("set_sample_rate: %d clock %d\n", rate, clock));
+	chip->sample_rate = rate;
+
+	/* Override the sample rate if this card is set to Echo sync. */
+	if (chip->input_clock == ECHO_CLOCK_ESYNC)
+		clock = GD24_EXT_SYNC;
+
+	chip->comm_page->sample_rate = cpu_to_le32(rate);	/* ignored by the DSP ? */
+	chip->comm_page->gd_clock_state = clock;
+	clear_handshake(chip);
+	return send_vector(chip, DSP_VC_SET_GD_AUDIO_STATE);
+}
+
+
+
+static int set_input_clock(struct echoaudio *chip, u16 clock)
+{
+	snd_assert(clock == ECHO_CLOCK_INTERNAL ||
+		   clock == ECHO_CLOCK_ESYNC, return -EINVAL);
+	chip->input_clock = clock;
+	return set_sample_rate(chip, chip->sample_rate);
+}
+