Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 1557 insertions, 0 deletions

diff --git a/sound/oss/hal2.c b/sound/oss/hal2.c
new file mode 100644
index 00000000000..afe97c4ce06
--- /dev/null
+++ b/sound/oss/hal2.c
@@ -0,0 +1,1557 @@
+/*
+ *  Driver for A2 audio system used in SGI machines
+ *  Copyright (c) 2001, 2002, 2003 Ladislav Michl <ladis@linux-mips.org>
+ *  
+ *  Based on Ulf Carlsson's code.
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as 
+ *  published by the Free Software Foundation.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ *  Supported devices:
+ *  /dev/dsp    standard dsp device, (mostly) OSS compatible
+ *  /dev/mixer	standard mixer device, (mostly) OSS compatible
+ *
+ */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/sched.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/poll.h>
+#include <linux/interrupt.h>
+#include <linux/dma-mapping.h>
+#include <linux/sound.h>
+#include <linux/soundcard.h>
+
+#include <asm/io.h>
+#include <asm/sgi/hpc3.h>
+#include <asm/sgi/ip22.h>
+
+#include "hal2.h"
+
+#if 0
+#define DEBUG(args...)		printk(args)
+#else
+#define DEBUG(args...)
+#endif
+
+#if 0 
+#define DEBUG_MIX(args...)	printk(args)
+#else
+#define DEBUG_MIX(args...)
+#endif
+
+/*
+ * Before touching these look how it works. It is a bit unusual I know,
+ * but it helps to keep things simple. This driver is considered complete
+ * and I won't add any new features although hardware has many cool
+ * capabilities.
+ * (Historical note: HAL2 driver was first written by Ulf Carlsson - ALSA
+ * 0.3 running with 2.2.x kernel. Then ALSA changed completely and it
+ * seemed easier to me to write OSS driver from scratch - this one. Now
+ * when ALSA is official part of 2.6 kernel it's time to write ALSA driver
+ * using (hopefully) final version of ALSA interface)
+ */
+#define H2_BLOCK_SIZE	1024
+#define H2_ADC_BUFSIZE	8192
+#define H2_DAC_BUFSIZE	16834
+
+struct hal2_pbus {
+	struct hpc3_pbus_dmacregs *pbus;
+	int pbusnr;
+	unsigned int ctrl;		/* Current state of pbus->pbdma_ctrl */
+};
+
+struct hal2_desc {
+	struct hpc_dma_desc desc;
+	u32 cnt;			/* don't touch, it is also padding */
+};
+
+struct hal2_codec {
+	unsigned char *buffer;
+	struct hal2_desc *desc;
+	int desc_count;
+	int tail, head;			/* tail index, head index */
+	struct hal2_pbus pbus;
+	unsigned int format;		/* Audio data format */
+	int voices;			/* mono/stereo */
+	unsigned int sample_rate;
+	unsigned int master;		/* Master frequency */
+	unsigned short mod;		/* MOD value */
+	unsigned short inc;		/* INC value */
+
+	wait_queue_head_t dma_wait;
+	spinlock_t lock;
+	struct semaphore sem;
+
+	int usecount;			/* recording and playback are
+					 * independent */
+};
+
+#define H2_MIX_OUTPUT_ATT	0
+#define H2_MIX_INPUT_GAIN	1
+#define H2_MIXERS		2
+struct hal2_mixer {
+	int modcnt;
+	unsigned int master;
+	unsigned int volume[H2_MIXERS];
+};
+
+struct hal2_card {
+	int dev_dsp;			/* audio device */
+	int dev_mixer;			/* mixer device */
+	int dev_midi;			/* midi device */
+
+	struct hal2_ctl_regs *ctl_regs;	/* HAL2 ctl registers */
+	struct hal2_aes_regs *aes_regs;	/* HAL2 aes registers */
+	struct hal2_vol_regs *vol_regs;	/* HAL2 vol registers */
+	struct hal2_syn_regs *syn_regs;	/* HAL2 syn registers */
+
+	struct hal2_codec dac;
+	struct hal2_codec adc;
+	struct hal2_mixer mixer;
+};
+
+#define H2_INDIRECT_WAIT(regs)	while (regs->isr & H2_ISR_TSTATUS);
+
+#define H2_READ_ADDR(addr)	(addr | (1<<7))
+#define H2_WRITE_ADDR(addr)	(addr)
+
+static char *hal2str = "HAL2";
+
+/*
+ * I doubt anyone has a machine with two HAL2 cards. It's possible to
+ * have two HPC's, so it is probably possible to have two HAL2 cards.
+ * Try to deal with it, but note that it is not tested.
+ */
+#define MAXCARDS	2
+static struct hal2_card* hal2_card[MAXCARDS];
+
+static const struct {
+	unsigned char idx:4, avail:1;
+} mixtable[SOUND_MIXER_NRDEVICES] = {
+	[SOUND_MIXER_PCM]	= { H2_MIX_OUTPUT_ATT, 1 },	/* voice */
+	[SOUND_MIXER_MIC]	= { H2_MIX_INPUT_GAIN, 1 },	/* mic */
+};
+
+#define H2_SUPPORTED_FORMATS	(AFMT_S16_LE | AFMT_S16_BE)
+
+static inline void hal2_isr_write(struct hal2_card *hal2, u16 val)
+{
+	hal2->ctl_regs->isr = val;
+}
+
+static inline u16 hal2_isr_look(struct hal2_card *hal2)
+{
+	return hal2->ctl_regs->isr;
+}
+
+static inline u16 hal2_rev_look(struct hal2_card *hal2)
+{
+	return hal2->ctl_regs->rev;
+}
+
+#ifdef HAL2_DUMP_REGS
+static u16 hal2_i_look16(struct hal2_card *hal2, u16 addr)
+{
+	struct hal2_ctl_regs *regs = hal2->ctl_regs;
+
+	regs->iar = H2_READ_ADDR(addr);
+	H2_INDIRECT_WAIT(regs);
+	return regs->idr0;
+}
+#endif
+
+static u32 hal2_i_look32(struct hal2_card *hal2, u16 addr)
+{
+	u32 ret;
+	struct hal2_ctl_regs *regs = hal2->ctl_regs;
+
+	regs->iar = H2_READ_ADDR(addr);
+	H2_INDIRECT_WAIT(regs);
+	ret = regs->idr0 & 0xffff;
+	regs->iar = H2_READ_ADDR(addr | 0x1);
+	H2_INDIRECT_WAIT(regs);
+	ret |= (regs->idr0 & 0xffff) << 16;
+	return ret;
+}
+
+static void hal2_i_write16(struct hal2_card *hal2, u16 addr, u16 val)
+{
+	struct hal2_ctl_regs *regs = hal2->ctl_regs;
+
+	regs->idr0 = val;
+	regs->idr1 = 0;
+	regs->idr2 = 0;
+	regs->idr3 = 0;
+	regs->iar = H2_WRITE_ADDR(addr);
+	H2_INDIRECT_WAIT(regs);
+}
+
+static void hal2_i_write32(struct hal2_card *hal2, u16 addr, u32 val)
+{
+	struct hal2_ctl_regs *regs = hal2->ctl_regs;
+
+	regs->idr0 = val & 0xffff;
+	regs->idr1 = val >> 16;
+	regs->idr2 = 0;
+	regs->idr3 = 0;
+	regs->iar = H2_WRITE_ADDR(addr);
+	H2_INDIRECT_WAIT(regs);
+}
+
+static void hal2_i_setbit16(struct hal2_card *hal2, u16 addr, u16 bit)
+{
+	struct hal2_ctl_regs *regs = hal2->ctl_regs;
+
+	regs->iar = H2_READ_ADDR(addr);
+	H2_INDIRECT_WAIT(regs);
+	regs->idr0 = (regs->idr0 & 0xffff) | bit;
+	regs->idr1 = 0;
+	regs->idr2 = 0;
+	regs->idr3 = 0;
+	regs->iar = H2_WRITE_ADDR(addr);
+	H2_INDIRECT_WAIT(regs);
+}
+
+static void hal2_i_setbit32(struct hal2_card *hal2, u16 addr, u32 bit)
+{
+	u32 tmp;
+	struct hal2_ctl_regs *regs = hal2->ctl_regs;
+
+	regs->iar = H2_READ_ADDR(addr);
+	H2_INDIRECT_WAIT(regs);
+	tmp = (regs->idr0 & 0xffff) | (regs->idr1 << 16) | bit;
+	regs->idr0 = tmp & 0xffff;
+	regs->idr1 = tmp >> 16;
+	regs->idr2 = 0;
+	regs->idr3 = 0;
+	regs->iar = H2_WRITE_ADDR(addr);
+	H2_INDIRECT_WAIT(regs);
+}
+
+static void hal2_i_clearbit16(struct hal2_card *hal2, u16 addr, u16 bit)
+{
+	struct hal2_ctl_regs *regs = hal2->ctl_regs;
+
+	regs->iar = H2_READ_ADDR(addr);
+	H2_INDIRECT_WAIT(regs);
+	regs->idr0 = (regs->idr0 & 0xffff) & ~bit;
+	regs->idr1 = 0;
+	regs->idr2 = 0;
+	regs->idr3 = 0;
+	regs->iar = H2_WRITE_ADDR(addr);
+	H2_INDIRECT_WAIT(regs);
+}
+
+#if 0
+static void hal2_i_clearbit32(struct hal2_card *hal2, u16 addr, u32 bit)
+{
+	u32 tmp;
+	hal2_ctl_regs_t *regs = hal2->ctl_regs;
+
+	regs->iar = H2_READ_ADDR(addr);
+	H2_INDIRECT_WAIT(regs);
+	tmp = ((regs->idr0 & 0xffff) | (regs->idr1 << 16)) & ~bit;
+	regs->idr0 = tmp & 0xffff;
+	regs->idr1 = tmp >> 16;
+	regs->idr2 = 0;
+	regs->idr3 = 0;
+	regs->iar = H2_WRITE_ADDR(addr);
+	H2_INDIRECT_WAIT(regs);
+}
+#endif
+
+#ifdef HAL2_DUMP_REGS
+static void hal2_dump_regs(struct hal2_card *hal2)
+{
+	DEBUG("isr: %08hx ", hal2_isr_look(hal2));
+	DEBUG("rev: %08hx\n", hal2_rev_look(hal2));
+	DEBUG("relay: %04hx\n", hal2_i_look16(hal2, H2I_RELAY_C));
+	DEBUG("port en: %04hx ", hal2_i_look16(hal2, H2I_DMA_PORT_EN));
+	DEBUG("dma end: %04hx ", hal2_i_look16(hal2, H2I_DMA_END));
+	DEBUG("dma drv: %04hx\n", hal2_i_look16(hal2, H2I_DMA_DRV));
+	DEBUG("syn ctl: %04hx ", hal2_i_look16(hal2, H2I_SYNTH_C));
+	DEBUG("aesrx ctl: %04hx ", hal2_i_look16(hal2, H2I_AESRX_C));
+	DEBUG("aestx ctl: %04hx ", hal2_i_look16(hal2, H2I_AESTX_C));
+	DEBUG("dac ctl1: %04hx ", hal2_i_look16(hal2, H2I_ADC_C1));
+	DEBUG("dac ctl2: %08x ", hal2_i_look32(hal2, H2I_ADC_C2));
+	DEBUG("adc ctl1: %04hx ", hal2_i_look16(hal2, H2I_DAC_C1));
+	DEBUG("adc ctl2: %08x ", hal2_i_look32(hal2, H2I_DAC_C2));
+	DEBUG("syn map: %04hx\n", hal2_i_look16(hal2, H2I_SYNTH_MAP_C));
+	DEBUG("bres1 ctl1: %04hx ", hal2_i_look16(hal2, H2I_BRES1_C1));
+	DEBUG("bres1 ctl2: %04x ", hal2_i_look32(hal2, H2I_BRES1_C2));
+	DEBUG("bres2 ctl1: %04hx ", hal2_i_look16(hal2, H2I_BRES2_C1));
+	DEBUG("bres2 ctl2: %04x ", hal2_i_look32(hal2, H2I_BRES2_C2));
+	DEBUG("bres3 ctl1: %04hx ", hal2_i_look16(hal2, H2I_BRES3_C1));
+	DEBUG("bres3 ctl2: %04x\n", hal2_i_look32(hal2, H2I_BRES3_C2));
+}
+#endif
+
+static struct hal2_card* hal2_dsp_find_card(int minor)
+{
+	int i;
+
+	for (i = 0; i < MAXCARDS; i++)
+		if (hal2_card[i] != NULL && hal2_card[i]->dev_dsp == minor)
+			return hal2_card[i];
+	return NULL;
+}
+
+static struct hal2_card* hal2_mixer_find_card(int minor)
+{
+	int i;
+
+	for (i = 0; i < MAXCARDS; i++)
+		if (hal2_card[i] != NULL && hal2_card[i]->dev_mixer == minor)
+			return hal2_card[i];
+	return NULL;
+}
+
+static void hal2_inc_head(struct hal2_codec *codec)
+{
+	codec->head++;
+	if (codec->head == codec->desc_count)
+		codec->head = 0;
+}
+
+static void hal2_inc_tail(struct hal2_codec *codec)
+{
+	codec->tail++;
+	if (codec->tail == codec->desc_count)
+		codec->tail = 0;
+}
+
+static void hal2_dac_interrupt(struct hal2_codec *dac)
+{
+	int running;
+
+	spin_lock(&dac->lock);
+	/* if tail buffer contains zero samples DMA stream was already
+	 * stopped */
+	running = dac->desc[dac->tail].cnt;
+	dac->desc[dac->tail].cnt = 0;
+	dac->desc[dac->tail].desc.cntinfo = HPCDMA_XIE | HPCDMA_EOX;
+	/* we just proccessed empty buffer, don't update tail pointer */
+	if (running)
+		hal2_inc_tail(dac);
+	spin_unlock(&dac->lock);
+
+	wake_up(&dac->dma_wait);
+}
+
+static void hal2_adc_interrupt(struct hal2_codec *adc)
+{
+	int running;
+
+	spin_lock(&adc->lock);
+	/* if head buffer contains nonzero samples DMA stream was already
+	 * stopped */
+	running = !adc->desc[adc->head].cnt;
+	adc->desc[adc->head].cnt = H2_BLOCK_SIZE;
+	adc->desc[adc->head].desc.cntinfo = HPCDMA_XIE | HPCDMA_EOR;
+	/* we just proccessed empty buffer, don't update head pointer */
+	if (running)
+		hal2_inc_head(adc);
+	spin_unlock(&adc->lock);
+
+	wake_up(&adc->dma_wait);
+}
+
+static irqreturn_t hal2_interrupt(int irq, void *dev_id, struct pt_regs *regs)
+{
+	struct hal2_card *hal2 = (struct hal2_card*)dev_id;
+	irqreturn_t ret = IRQ_NONE;
+
+	/* decide what caused this interrupt */
+	if (hal2->dac.pbus.pbus->pbdma_ctrl & HPC3_PDMACTRL_INT) {
+		hal2_dac_interrupt(&hal2->dac);
+		ret = IRQ_HANDLED;
+	}
+	if (hal2->adc.pbus.pbus->pbdma_ctrl & HPC3_PDMACTRL_INT) {
+		hal2_adc_interrupt(&hal2->adc);
+		ret = IRQ_HANDLED;
+	}
+	return ret;
+}
+
+static int hal2_compute_rate(struct hal2_codec *codec, unsigned int rate)
+{
+	unsigned short mod;
+	
+	DEBUG("rate: %d\n", rate);
+	
+	if (rate < 4000) rate = 4000;
+	else if (rate > 48000) rate = 48000;
+
+	if (44100 % rate < 48000 % rate) {
+		mod = 4 * 44100 / rate;
+		codec->master = 44100;
+	} else {
+		mod = 4 * 48000 / rate;
+		codec->master = 48000;
+	}
+
+	codec->inc = 4;
+	codec->mod = mod;
+	rate = 4 * codec->master / mod;
+
+	DEBUG("real_rate: %d\n", rate);
+
+	return rate;
+}
+
+static void hal2_set_dac_rate(struct hal2_card *hal2)
+{
+	unsigned int master = hal2->dac.master;
+	int inc = hal2->dac.inc;
+	int mod = hal2->dac.mod;
+
+	DEBUG("master: %d inc: %d mod: %d\n", master, inc, mod);
+	
+	hal2_i_write16(hal2, H2I_BRES1_C1, (master == 44100) ? 1 : 0);
+	hal2_i_write32(hal2, H2I_BRES1_C2, ((0xffff & (inc - mod - 1)) << 16) | inc);
+}
+
+static void hal2_set_adc_rate(struct hal2_card *hal2)
+{
+	unsigned int master = hal2->adc.master;
+	int inc = hal2->adc.inc;
+	int mod = hal2->adc.mod;
+
+	DEBUG("master: %d inc: %d mod: %d\n", master, inc, mod);
+	
+	hal2_i_write16(hal2, H2I_BRES2_C1, (master == 44100) ? 1 : 0);
+	hal2_i_write32(hal2, H2I_BRES2_C2, ((0xffff & (inc - mod - 1)) << 16) | inc);
+}
+
+static void hal2_setup_dac(struct hal2_card *hal2)
+{
+	unsigned int fifobeg, fifoend, highwater, sample_size;
+	struct hal2_pbus *pbus = &hal2->dac.pbus;
+
+	DEBUG("hal2_setup_dac\n");
+	
+	/* Now we set up some PBUS information. The PBUS needs information about
+	 * what portion of the fifo it will use. If it's receiving or
+	 * transmitting, and finally whether the stream is little endian or big
+	 * endian. The information is written later, on the start call.
+	 */
+	sample_size = 2 * hal2->dac.voices;
+	/* Fifo should be set to hold exactly four samples. Highwater mark
+	 * should be set to two samples. */
+	highwater = (sample_size * 2) >> 1;	/* halfwords */
+	fifobeg = 0;				/* playback is first */
+	fifoend = (sample_size * 4) >> 3;	/* doublewords */
+	pbus->ctrl = HPC3_PDMACTRL_RT | HPC3_PDMACTRL_LD |
+		     (highwater << 8) | (fifobeg << 16) | (fifoend << 24) |
+		     (hal2->dac.format & AFMT_S16_LE ? HPC3_PDMACTRL_SEL : 0);
+	/* We disable everything before we do anything at all */
+	pbus->pbus->pbdma_ctrl = HPC3_PDMACTRL_LD;
+	hal2_i_clearbit16(hal2, H2I_DMA_PORT_EN, H2I_DMA_PORT_EN_CODECTX);
+	/* Setup the HAL2 for playback */
+	hal2_set_dac_rate(hal2);
+	/* Set endianess */
+	if (hal2->dac.format & AFMT_S16_LE)
+		hal2_i_setbit16(hal2, H2I_DMA_END, H2I_DMA_END_CODECTX);
+	else
+		hal2_i_clearbit16(hal2, H2I_DMA_END, H2I_DMA_END_CODECTX);
+	/* Set DMA bus */
+	hal2_i_setbit16(hal2, H2I_DMA_DRV, (1 << pbus->pbusnr));
+	/* We are using 1st Bresenham clock generator for playback */
+	hal2_i_write16(hal2, H2I_DAC_C1, (pbus->pbusnr << H2I_C1_DMA_SHIFT)
+			| (1 << H2I_C1_CLKID_SHIFT)
+			| (hal2->dac.voices << H2I_C1_DATAT_SHIFT));
+}
+
+static void hal2_setup_adc(struct hal2_card *hal2)
+{
+	unsigned int fifobeg, fifoend, highwater, sample_size;
+	struct hal2_pbus *pbus = &hal2->adc.pbus;
+
+	DEBUG("hal2_setup_adc\n");
+
+	sample_size = 2 * hal2->adc.voices;
+	highwater = (sample_size * 2) >> 1;		/* halfwords */
+	fifobeg = (4 * 4) >> 3;				/* record is second */
+	fifoend = (4 * 4 + sample_size * 4) >> 3;	/* doublewords */
+	pbus->ctrl = HPC3_PDMACTRL_RT | HPC3_PDMACTRL_RCV | HPC3_PDMACTRL_LD | 
+		     (highwater << 8) | (fifobeg << 16) | (fifoend << 24) |
+		     (hal2->adc.format & AFMT_S16_LE ? HPC3_PDMACTRL_SEL : 0);
+	pbus->pbus->pbdma_ctrl = HPC3_PDMACTRL_LD;
+	hal2_i_clearbit16(hal2, H2I_DMA_PORT_EN, H2I_DMA_PORT_EN_CODECR);
+	/* Setup the HAL2 for record */
+	hal2_set_adc_rate(hal2);
+	/* Set endianess */
+	if (hal2->adc.format & AFMT_S16_LE)
+		hal2_i_setbit16(hal2, H2I_DMA_END, H2I_DMA_END_CODECR);
+	else
+		hal2_i_clearbit16(hal2, H2I_DMA_END, H2I_DMA_END_CODECR);
+	/* Set DMA bus */
+	hal2_i_setbit16(hal2, H2I_DMA_DRV, (1 << pbus->pbusnr));
+	/* We are using 2nd Bresenham clock generator for record */
+	hal2_i_write16(hal2, H2I_ADC_C1, (pbus->pbusnr << H2I_C1_DMA_SHIFT)
+			| (2 << H2I_C1_CLKID_SHIFT)
+			| (hal2->adc.voices << H2I_C1_DATAT_SHIFT));
+}
+
+static dma_addr_t hal2_desc_addr(struct hal2_codec *codec, int i)
+{
+	if (--i < 0)
+		i = codec->desc_count - 1;
+	return codec->desc[i].desc.pnext;
+}
+
+static void hal2_start_dac(struct hal2_card *hal2)
+{
+	struct hal2_codec *dac = &hal2->dac;
+	struct hal2_pbus *pbus = &dac->pbus;
+
+	pbus->pbus->pbdma_dptr = hal2_desc_addr(dac, dac->tail);
+	pbus->pbus->pbdma_ctrl = pbus->ctrl | HPC3_PDMACTRL_ACT;
+	/* enable DAC */
+	hal2_i_setbit16(hal2, H2I_DMA_PORT_EN, H2I_DMA_PORT_EN_CODECTX);
+}
+
+static void hal2_start_adc(struct hal2_card *hal2)
+{
+	struct hal2_codec *adc = &hal2->adc;
+	struct hal2_pbus *pbus = &adc->pbus;
+
+	pbus->pbus->pbdma_dptr = hal2_desc_addr(adc, adc->head);
+	pbus->pbus->pbdma_ctrl = pbus->ctrl | HPC3_PDMACTRL_ACT;
+	/* enable ADC */
+	hal2_i_setbit16(hal2, H2I_DMA_PORT_EN, H2I_DMA_PORT_EN_CODECR);
+}
+
+static inline void hal2_stop_dac(struct hal2_card *hal2)
+{
+	hal2->dac.pbus.pbus->pbdma_ctrl = HPC3_PDMACTRL_LD;
+	/* The HAL2 itself may remain enabled safely */
+}
+
+static inline void hal2_stop_adc(struct hal2_card *hal2)
+{
+	hal2->adc.pbus.pbus->pbdma_ctrl = HPC3_PDMACTRL_LD;
+}
+
+static int hal2_alloc_dmabuf(struct hal2_codec *codec, int size,
+			     int count, int cntinfo, int dir)
+{
+	struct hal2_desc *desc, *dma_addr;
+	int i;
+
+	DEBUG("allocating %dk DMA buffer.\n", size / 1024);
+
+	codec->buffer = (unsigned char *)__get_free_pages(GFP_KERNEL | GFP_DMA,
+							  get_order(size));
+	if (!codec->buffer)
+		return -ENOMEM;
+	desc = dma_alloc_coherent(NULL, count * sizeof(struct hal2_desc),
+				  (dma_addr_t *)&dma_addr, GFP_KERNEL);
+	if (!desc) {
+		free_pages((unsigned long)codec->buffer, get_order(size));
+		return -ENOMEM;
+	}
+	codec->desc = desc;
+	for (i = 0; i < count; i++) {
+		desc->desc.pbuf = dma_map_single(NULL,
+			(void *)(codec->buffer + i * H2_BLOCK_SIZE),
+			H2_BLOCK_SIZE, dir);
+		desc->desc.cntinfo = cntinfo;
+		desc->desc.pnext = (i == count - 1) ?
+				   (u32)dma_addr : (u32)(dma_addr + i + 1);
+		desc->cnt = 0;
+		desc++;
+	}
+	codec->desc_count = count;
+	codec->head = codec->tail = 0;
+	return 0;
+}
+
+static int hal2_alloc_dac_dmabuf(struct hal2_codec *codec)
+{
+	return hal2_alloc_dmabuf(codec, H2_DAC_BUFSIZE,
+				 H2_DAC_BUFSIZE / H2_BLOCK_SIZE,
+				 HPCDMA_XIE | HPCDMA_EOX,
+				 DMA_TO_DEVICE);
+}
+
+static int hal2_alloc_adc_dmabuf(struct hal2_codec *codec)
+{
+	return hal2_alloc_dmabuf(codec, H2_ADC_BUFSIZE,
+				 H2_ADC_BUFSIZE / H2_BLOCK_SIZE,
+				 HPCDMA_XIE | H2_BLOCK_SIZE,
+				 DMA_TO_DEVICE);
+}
+
+static void hal2_free_dmabuf(struct hal2_codec *codec, int size, int dir)
+{
+	dma_addr_t dma_addr;
+	int i;
+
+	dma_addr = codec->desc[codec->desc_count - 1].desc.pnext;
+	for (i = 0; i < codec->desc_count; i++)
+		dma_unmap_single(NULL, codec->desc[i].desc.pbuf,
+				 H2_BLOCK_SIZE, dir);
+	dma_free_coherent(NULL, codec->desc_count * sizeof(struct hal2_desc),
+			  (void *)codec->desc, dma_addr);
+	free_pages((unsigned long)codec->buffer, get_order(size));
+}
+
+static void hal2_free_dac_dmabuf(struct hal2_codec *codec)
+{
+	return hal2_free_dmabuf(codec, H2_DAC_BUFSIZE, DMA_TO_DEVICE);
+}
+
+static void hal2_free_adc_dmabuf(struct hal2_codec *codec)
+{
+	return hal2_free_dmabuf(codec, H2_ADC_BUFSIZE, DMA_FROM_DEVICE);
+}
+
+/* 
+ * Add 'count' bytes to 'buffer' from DMA ring buffers. Return number of
+ * bytes added or -EFAULT if copy_from_user failed.
+ */
+static int hal2_get_buffer(struct hal2_card *hal2, char *buffer, int count)
+{
+	unsigned long flags;
+	int size, ret = 0;
+	unsigned char *buf;
+	struct hal2_desc *tail;
+	struct hal2_codec *adc = &hal2->adc;
+
+	DEBUG("getting %d bytes ", count);
+
+	spin_lock_irqsave(&adc->lock, flags);
+	tail = &adc->desc[adc->tail];
+	/* enable DMA stream if there are no data */
+	if (!tail->cnt && !(adc->pbus.pbus->pbdma_ctrl & HPC3_PDMACTRL_ISACT))
+		hal2_start_adc(hal2);
+	while (tail->cnt > 0 && count > 0) {
+		size = min((int)tail->cnt, count);
+		buf = &adc->buffer[(adc->tail + 1) * H2_BLOCK_SIZE - tail->cnt];
+		spin_unlock_irqrestore(&adc->lock, flags);
+		dma_sync_single(NULL, tail->desc.pbuf, size, DMA_FROM_DEVICE);
+		if (copy_to_user(buffer, buf, size)) {
+			ret = -EFAULT;
+			goto out;
+		}
+		spin_lock_irqsave(&adc->lock, flags);
+		tail->cnt -= size;
+		/* buffer is empty, update tail pointer */
+		if (tail->cnt == 0) {
+			tail->desc.cntinfo = HPCDMA_XIE | H2_BLOCK_SIZE;
+			hal2_inc_tail(adc);
+			tail = &adc->desc[adc->tail];
+			/* enable DMA stream again if needed */
+			if (!(adc->pbus.pbus->pbdma_ctrl & HPC3_PDMACTRL_ISACT))
+				hal2_start_adc(hal2);
+		}
+		buffer += size;
+		ret += size;
+		count -= size;
+
+		DEBUG("(%d) ", size);
+	}
+	spin_unlock_irqrestore(&adc->lock, flags);
+out:
+	DEBUG("\n");
+
+	return ret;
+} 
+
+/* 
+ * Add 'count' bytes from 'buffer' to DMA ring buffers. Return number of
+ * bytes added or -EFAULT if copy_from_user failed.
+ */
+static int hal2_add_buffer(struct hal2_card *hal2, char *buffer, int count)
+{
+	unsigned long flags;
+	unsigned char *buf;
+	int size, ret = 0;
+	struct hal2_desc *head;
+	struct hal2_codec *dac = &hal2->dac;
+
+	DEBUG("adding %d bytes ", count);
+
+	spin_lock_irqsave(&dac->lock, flags);
+	head = &dac->desc[dac->head];
+	while (head->cnt == 0 && count > 0) {
+		size = min((int)H2_BLOCK_SIZE, count);
+		buf = &dac->buffer[dac->head * H2_BLOCK_SIZE];
+		spin_unlock_irqrestore(&dac->lock, flags);
+		if (copy_from_user(buf, buffer, size)) {
+			ret = -EFAULT;
+			goto out;
+		}
+		dma_sync_single(NULL, head->desc.pbuf, size, DMA_TO_DEVICE);
+		spin_lock_irqsave(&dac->lock, flags);
+		head->desc.cntinfo = size | HPCDMA_XIE;
+		head->cnt = size;
+		buffer += size;
+		ret += size;
+		count -= size;
+		hal2_inc_head(dac);
+		head = &dac->desc[dac->head];
+
+		DEBUG("(%d) ", size);
+	}
+	if (!(dac->pbus.pbus->pbdma_ctrl & HPC3_PDMACTRL_ISACT) && ret > 0)
+		hal2_start_dac(hal2);
+	spin_unlock_irqrestore(&dac->lock, flags);
+out:
+	DEBUG("\n");
+
+	return ret;
+}
+
+#define hal2_reset_dac_pointer(hal2)	hal2_reset_pointer(hal2, 1)
+#define hal2_reset_adc_pointer(hal2)	hal2_reset_pointer(hal2, 0)
+static void hal2_reset_pointer(struct hal2_card *hal2, int is_dac)
+{
+	int i;
+	struct hal2_codec *codec = (is_dac) ? &hal2->dac : &hal2->adc;
+
+	DEBUG("hal2_reset_pointer\n");
+
+	for (i = 0; i < codec->desc_count; i++) {
+		codec->desc[i].cnt = 0;
+		codec->desc[i].desc.cntinfo = HPCDMA_XIE | (is_dac) ?
+					      HPCDMA_EOX : H2_BLOCK_SIZE;
+	}
+	codec->head = codec->tail = 0;
+}
+
+static int hal2_sync_dac(struct hal2_card *hal2)
+{
+	DECLARE_WAITQUEUE(wait, current);
+	struct hal2_codec *dac = &hal2->dac;
+	int ret = 0;
+	unsigned long flags;
+	signed long timeout = 1000 * H2_BLOCK_SIZE * 2 * dac->voices *
+			      HZ / dac->sample_rate / 900;
+
+	while (dac->pbus.pbus->pbdma_ctrl & HPC3_PDMACTRL_ISACT) {
+		add_wait_queue(&dac->dma_wait, &wait);
+		set_current_state(TASK_INTERRUPTIBLE);
+		schedule_timeout(timeout);
+		spin_lock_irqsave(&dac->lock, flags);
+		if (dac->desc[dac->tail].cnt)
+			ret = -ETIME;
+		spin_unlock_irqrestore(&dac->lock, flags);
+		if (signal_pending(current))
+			ret = -ERESTARTSYS;
+		if (ret) {
+			hal2_stop_dac(hal2);
+			hal2_reset_dac_pointer(hal2);
+		}
+		remove_wait_queue(&dac->dma_wait, &wait);
+	}
+
+	return ret;
+}
+
+static int hal2_write_mixer(struct hal2_card *hal2, int index, int vol)
+{
+	unsigned int l, r, tmp;
+
+	DEBUG_MIX("mixer %d write\n", index);
+
+	if (index >= SOUND_MIXER_NRDEVICES || !mixtable[index].avail)
+		return -EINVAL;
+
+	r = (vol >> 8) & 0xff;
+	if (r > 100)
+		r = 100;
+	l = vol & 0xff;
+	if (l > 100)
+		l = 100;
+
+	hal2->mixer.volume[mixtable[index].idx] = l | (r << 8);
+
+	switch (mixtable[index].idx) {
+	case H2_MIX_OUTPUT_ATT:
+
+		DEBUG_MIX("output attenuator %d,%d\n", l, r);
+
+		if (r | l) {
+			tmp = hal2_i_look32(hal2, H2I_DAC_C2);
+			tmp &= ~(H2I_C2_L_ATT_M | H2I_C2_R_ATT_M | H2I_C2_MUTE);
+
+			/* Attenuator has five bits */
+			l = 31 * (100 - l) / 99;
+			r = 31 * (100 - r) / 99;
+
+			DEBUG_MIX("left: %d, right %d\n", l, r);
+
+			tmp |= (l << H2I_C2_L_ATT_SHIFT) & H2I_C2_L_ATT_M;
+			tmp |= (r << H2I_C2_R_ATT_SHIFT) & H2I_C2_R_ATT_M;
+			hal2_i_write32(hal2, H2I_DAC_C2, tmp);
+		} else 
+			hal2_i_setbit32(hal2, H2I_DAC_C2, H2I_C2_MUTE);
+		break;
+	case H2_MIX_INPUT_GAIN:
+
+		DEBUG_MIX("input gain %d,%d\n", l, r);
+
+		tmp = hal2_i_look32(hal2, H2I_ADC_C2);
+		tmp &= ~(H2I_C2_L_GAIN_M | H2I_C2_R_GAIN_M);
+
+		/* Gain control has four bits */
+		l = 16 * l / 100;
+		r = 16 * r / 100;
+
+		DEBUG_MIX("left: %d, right %d\n", l, r);
+
+		tmp |= (l << H2I_C2_L_GAIN_SHIFT) & H2I_C2_L_GAIN_M;
+		tmp |= (r << H2I_C2_R_GAIN_SHIFT) & H2I_C2_R_GAIN_M;
+		hal2_i_write32(hal2, H2I_ADC_C2, tmp);
+
+		break;
+	}
+
+	return 0;
+}
+
+static void hal2_init_mixer(struct hal2_card *hal2)
+{
+	int i;
+
+	for (i = 0; i < SOUND_MIXER_NRDEVICES; i++)
+		if (mixtable[i].avail)
+			hal2->mixer.volume[mixtable[i].idx] = 100 | (100 << 8);
+
+	/* disable attenuator */
+	hal2_i_write32(hal2, H2I_DAC_C2, 0);
+	/* set max input gain */
+	hal2_i_write32(hal2, H2I_ADC_C2, H2I_C2_MUTE |
+			(H2I_C2_L_GAIN_M << H2I_C2_L_GAIN_SHIFT) |
+			(H2I_C2_R_GAIN_M << H2I_C2_R_GAIN_SHIFT));
+	/* set max volume */
+	hal2->mixer.master = 0xff;
+	hal2->vol_regs->left = 0xff;
+	hal2->vol_regs->right = 0xff;
+}
+
+/*
+ * XXX: later i'll implement mixer for main volume which will be disabled
+ * by default. enabling it users will be allowed to have master volume level
+ * control on panel in their favourite X desktop
+ */
+static void hal2_volume_control(int direction)
+{
+	unsigned int master = hal2_card[0]->mixer.master;
+	struct hal2_vol_regs *vol = hal2_card[0]->vol_regs;
+
+	/* volume up */
+	if (direction > 0 && master < 0xff)
+		master++;
+	/* volume down */
+	else if (direction < 0 && master > 0)
+		master--;
+	/* TODO: mute/unmute */
+	vol->left = master;
+	vol->right = master;
+	hal2_card[0]->mixer.master = master;
+}
+
+static int hal2_mixer_ioctl(struct hal2_card *hal2, unsigned int cmd,
+			    unsigned long arg)
+{
+	int val;
+
+        if (cmd == SOUND_MIXER_INFO) {
+		mixer_info info;
+
+		memset(&info, 0, sizeof(info));
+		strlcpy(info.id, hal2str, sizeof(info.id));
+		strlcpy(info.name, hal2str, sizeof(info.name));
+		info.modify_counter = hal2->mixer.modcnt;
+		if (copy_to_user((void *)arg, &info, sizeof(info)))
+			return -EFAULT;
+		return 0;
+	}
+	if (cmd == SOUND_OLD_MIXER_INFO) {
+		_old_mixer_info info;
+
+		memset(&info, 0, sizeof(info));
+		strlcpy(info.id, hal2str, sizeof(info.id));
+		strlcpy(info.name, hal2str, sizeof(info.name));
+		if (copy_to_user((void *)arg, &info, sizeof(info)))
+			return -EFAULT;
+		return 0;
+	}
+	if (cmd == OSS_GETVERSION)
+		return put_user(SOUND_VERSION, (int *)arg);
+
+	if (_IOC_TYPE(cmd) != 'M' || _IOC_SIZE(cmd) != sizeof(int))
+                return -EINVAL;
+
+        if (_IOC_DIR(cmd) == _IOC_READ) {
+                switch (_IOC_NR(cmd)) {
+		/* Give the current record source */
+		case SOUND_MIXER_RECSRC:
+			val = 0;	/* FIXME */
+			break;
+		/* Give the supported mixers, all of them support stereo */
+                case SOUND_MIXER_DEVMASK:
+                case SOUND_MIXER_STEREODEVS: {
+			int i;
+
+			for (val = i = 0; i < SOUND_MIXER_NRDEVICES; i++)
+				if (mixtable[i].avail)
+					val |= 1 << i;
+			break;
+			}
+		/* Arg contains a bit for each supported recording source */
+                case SOUND_MIXER_RECMASK:
+			val = 0;
+			break;
+                case SOUND_MIXER_CAPS:
+			val = 0;
+			break;
+		/* Read a specific mixer */
+		default: {
+			int i = _IOC_NR(cmd);
+
+			if (i >= SOUND_MIXER_NRDEVICES || !mixtable[i].avail)
+				return -EINVAL;
+			val = hal2->mixer.volume[mixtable[i].idx];
+			break;
+			}
+		}
+		return put_user(val, (int *)arg);
+	}
+
+        if (_IOC_DIR(cmd) != (_IOC_WRITE|_IOC_READ))
+		return -EINVAL;
+
+	hal2->mixer.modcnt++;
+
+	if (get_user(val, (int *)arg))
+		return -EFAULT;
+
+	switch (_IOC_NR(cmd)) {
+	/* Arg contains a bit for each recording source */
+	case SOUND_MIXER_RECSRC:
+		return 0;	/* FIXME */
+	default:
+		return hal2_write_mixer(hal2, _IOC_NR(cmd), val);
+	}
+
+	return 0;
+}
+
+static int hal2_open_mixdev(struct inode *inode, struct file *file)
+{
+	struct hal2_card *hal2 = hal2_mixer_find_card(iminor(inode));
+
+	if (hal2) {
+		file->private_data = hal2;
+		return nonseekable_open(inode, file);
+	}
+	return -ENODEV;
+}
+
+static int hal2_release_mixdev(struct inode *inode, struct file *file)
+{
+	return 0;
+}
+
+static int hal2_ioctl_mixdev(struct inode *inode, struct file *file,
+			     unsigned int cmd, unsigned long arg)
+{
+	return hal2_mixer_ioctl((struct hal2_card *)file->private_data, cmd, arg);
+}
+
+static int hal2_ioctl(struct inode *inode, struct file *file, 
+		      unsigned int cmd, unsigned long arg)
+{
+	int val;
+	struct hal2_card *hal2 = (struct hal2_card *) file->private_data;
+
+	switch (cmd) {
+	case OSS_GETVERSION:
+		return put_user(SOUND_VERSION, (int *)arg);
+
+	case SNDCTL_DSP_SYNC:
+		if (file->f_mode & FMODE_WRITE)
+			return hal2_sync_dac(hal2);
+		return 0;
+
+	case SNDCTL_DSP_SETDUPLEX:
+		return 0;
+
+	case SNDCTL_DSP_GETCAPS:
+		return put_user(DSP_CAP_DUPLEX | DSP_CAP_MULTI, (int *)arg);
+
+	case SNDCTL_DSP_RESET:
+		if (file->f_mode & FMODE_READ) {
+			hal2_stop_adc(hal2);
+			hal2_reset_adc_pointer(hal2);
+		}
+		if (file->f_mode & FMODE_WRITE) {
+			hal2_stop_dac(hal2);
+			hal2_reset_dac_pointer(hal2);
+		}
+		return 0;
+
+ 	case SNDCTL_DSP_SPEED:
+		if (get_user(val, (int *)arg))
+			return -EFAULT;
+		if (file->f_mode & FMODE_READ) {
+			hal2_stop_adc(hal2);
+			val = hal2_compute_rate(&hal2->adc, val);
+			hal2->adc.sample_rate = val;
+			hal2_set_adc_rate(hal2);
+		}
+		if (file->f_mode & FMODE_WRITE) {
+			hal2_stop_dac(hal2);
+			val = hal2_compute_rate(&hal2->dac, val);
+			hal2->dac.sample_rate = val;
+			hal2_set_dac_rate(hal2);
+		}
+		return put_user(val, (int *)arg);
+
+	case SNDCTL_DSP_STEREO:
+		if (get_user(val, (int *)arg))
+			return -EFAULT;
+		if (file->f_mode & FMODE_READ) {
+			hal2_stop_adc(hal2);
+			hal2->adc.voices = (val) ? 2 : 1;
+			hal2_setup_adc(hal2);
+		}
+		if (file->f_mode & FMODE_WRITE) {
+			hal2_stop_dac(hal2);
+			hal2->dac.voices = (val) ? 2 : 1;
+			hal2_setup_dac(hal2);
+                }
+		return 0;
+
+	case SNDCTL_DSP_CHANNELS:
+		if (get_user(val, (int *)arg))
+			return -EFAULT;
+		if (val != 0) {
+			if (file->f_mode & FMODE_READ) {
+				hal2_stop_adc(hal2);
+				hal2->adc.voices = (val == 1) ? 1 : 2;
+				hal2_setup_adc(hal2);
+			}
+			if (file->f_mode & FMODE_WRITE) {
+				hal2_stop_dac(hal2);
+				hal2->dac.voices = (val == 1) ? 1 : 2;
+				hal2_setup_dac(hal2);
+			}
+		}
+		val = -EINVAL;
+		if (file->f_mode & FMODE_READ)
+			val = hal2->adc.voices;
+		if (file->f_mode & FMODE_WRITE)
+			val = hal2->dac.voices;
+		return put_user(val, (int *)arg);
+
+	case SNDCTL_DSP_GETFMTS: /* Returns a mask */
+                return put_user(H2_SUPPORTED_FORMATS, (int *)arg);
+
+	case SNDCTL_DSP_SETFMT: /* Selects ONE fmt*/
+		if (get_user(val, (int *)arg))
+			return -EFAULT;
+		if (val != AFMT_QUERY) {
+			if (!(val & H2_SUPPORTED_FORMATS))
+				return -EINVAL;
+			if (file->f_mode & FMODE_READ) {
+				hal2_stop_adc(hal2);
+				hal2->adc.format = val;
+				hal2_setup_adc(hal2);
+			}
+			if (file->f_mode & FMODE_WRITE) {
+				hal2_stop_dac(hal2);
+				hal2->dac.format = val;
+				hal2_setup_dac(hal2);
+			}
+		} else {
+			val = -EINVAL;
+			if (file->f_mode & FMODE_READ)
+				val = hal2->adc.format;
+			if (file->f_mode & FMODE_WRITE)
+				val = hal2->dac.format;
+		}
+		return put_user(val, (int *)arg);
+
+	case SNDCTL_DSP_POST:
+		return 0;
+
+	case SNDCTL_DSP_GETOSPACE: {
+		audio_buf_info info;
+		int i;
+		unsigned long flags;
+		struct hal2_codec *dac = &hal2->dac;
+
+		if (!(file->f_mode & FMODE_WRITE))
+			return -EINVAL;
+		info.fragments = 0;
+		spin_lock_irqsave(&dac->lock, flags);
+		for (i = 0; i < dac->desc_count; i++)
+			if (dac->desc[i].cnt == 0)
+				info.fragments++;
+		spin_unlock_irqrestore(&dac->lock, flags);
+		info.fragstotal = dac->desc_count;
+		info.fragsize = H2_BLOCK_SIZE;
+                info.bytes = info.fragsize * info.fragments;
+
+		return copy_to_user((void *)arg, &info, sizeof(info)) ? -EFAULT : 0;
+	}
+
+	case SNDCTL_DSP_GETISPACE: {
+		audio_buf_info info;
+		int i;
+		unsigned long flags;
+		struct hal2_codec *adc = &hal2->adc;
+
+		if (!(file->f_mode & FMODE_READ))
+			return -EINVAL;
+		info.fragments = 0;
+		info.bytes = 0;
+		spin_lock_irqsave(&adc->lock, flags);
+		for (i = 0; i < adc->desc_count; i++)
+			if (adc->desc[i].cnt > 0) {
+				info.fragments++;
+				info.bytes += adc->desc[i].cnt;
+			}
+		spin_unlock_irqrestore(&adc->lock, flags);
+		info.fragstotal = adc->desc_count;
+		info.fragsize = H2_BLOCK_SIZE;
+
+		return copy_to_user((void *)arg, &info, sizeof(info)) ? -EFAULT : 0;
+	}
+
+	case SNDCTL_DSP_NONBLOCK:
+		file->f_flags |= O_NONBLOCK;
+		return 0;
+
+	case SNDCTL_DSP_GETBLKSIZE:
+		return put_user(H2_BLOCK_SIZE, (int *)arg);
+
+	case SNDCTL_DSP_SETFRAGMENT:
+		return 0;
+
+	case SOUND_PCM_READ_RATE:
+		val = -EINVAL;
+		if (file->f_mode & FMODE_READ)
+			val = hal2->adc.sample_rate;
+		if (file->f_mode & FMODE_WRITE)
+			val = hal2->dac.sample_rate;
+		return put_user(val, (int *)arg);
+
+	case SOUND_PCM_READ_CHANNELS:
+		val = -EINVAL;
+		if (file->f_mode & FMODE_READ)
+			val = hal2->adc.voices;
+		if (file->f_mode & FMODE_WRITE)
+			val = hal2->dac.voices;
+		return put_user(val, (int *)arg);
+
+	case SOUND_PCM_READ_BITS:
+		return put_user(16, (int *)arg);
+	}
+
+	return hal2_mixer_ioctl(hal2, cmd, arg);
+}
+
+static ssize_t hal2_read(struct file *file, char *buffer,
+			 size_t count, loff_t *ppos)
+{
+	ssize_t err;
+	struct hal2_card *hal2 = (struct hal2_card *) file->private_data;
+	struct hal2_codec *adc = &hal2->adc;
+
+	if (!count)
+		return 0;
+	if (down_interruptible(&adc->sem))
+		return -EINTR;
+	if (file->f_flags & O_NONBLOCK) {
+		err = hal2_get_buffer(hal2, buffer, count);
+		err = err == 0 ? -EAGAIN : err;
+	} else {
+		do {
+			/* ~10% longer */
+			signed long timeout = 1000 * H2_BLOCK_SIZE *
+				2 * adc->voices * HZ / adc->sample_rate / 900;
+			unsigned long flags;
+			DECLARE_WAITQUEUE(wait, current);
+			ssize_t cnt = 0;
+
+			err = hal2_get_buffer(hal2, buffer, count);
+			if (err > 0) {
+				count -= err;
+				cnt += err;
+				buffer += err;
+				err = cnt;
+			}
+			if (count > 0 && err >= 0) {
+				add_wait_queue(&adc->dma_wait, &wait);
+				set_current_state(TASK_INTERRUPTIBLE);
+				schedule_timeout(timeout);
+				spin_lock_irqsave(&adc->lock, flags);
+				if (!adc->desc[adc->tail].cnt)
+					err = -EAGAIN;
+				spin_unlock_irqrestore(&adc->lock, flags);
+				if (signal_pending(current))
+					err = -ERESTARTSYS;
+				remove_wait_queue(&adc->dma_wait, &wait);
+				if (err < 0) {
+					hal2_stop_adc(hal2);
+					hal2_reset_adc_pointer(hal2);
+				}
+			}
+		} while (count > 0 && err >= 0);
+	}
+	up(&adc->sem);
+
+	return err;
+}
+
+static ssize_t hal2_write(struct file *file, const char *buffer,
+			  size_t count, loff_t *ppos)
+{
+	ssize_t err;
+	char *buf = (char*) buffer;
+	struct hal2_card *hal2 = (struct hal2_card *) file->private_data;
+	struct hal2_codec *dac = &hal2->dac;
+
+	if (!count)
+		return 0;
+	if (down_interruptible(&dac->sem))
+		return -EINTR;
+	if (file->f_flags & O_NONBLOCK) {
+		err = hal2_add_buffer(hal2, buf, count);
+		err = err == 0 ? -EAGAIN : err;
+	} else {
+		do {
+			/* ~10% longer */
+			signed long timeout = 1000 * H2_BLOCK_SIZE *
+				2 * dac->voices * HZ / dac->sample_rate / 900;
+			unsigned long flags;
+			DECLARE_WAITQUEUE(wait, current);
+			ssize_t cnt = 0;
+
+			err = hal2_add_buffer(hal2, buf, count);
+			if (err > 0) {
+				count -= err;
+				cnt += err;
+				buf += err;
+				err = cnt;
+			}
+			if (count > 0 && err >= 0) {
+				add_wait_queue(&dac->dma_wait, &wait);
+				set_current_state(TASK_INTERRUPTIBLE);
+				schedule_timeout(timeout);
+				spin_lock_irqsave(&dac->lock, flags);
+				if (dac->desc[dac->head].cnt)
+					err = -EAGAIN;
+				spin_unlock_irqrestore(&dac->lock, flags);
+				if (signal_pending(current))
+					err = -ERESTARTSYS;
+				remove_wait_queue(&dac->dma_wait, &wait);
+				if (err < 0) {
+					hal2_stop_dac(hal2);
+					hal2_reset_dac_pointer(hal2);
+				}
+			}
+		} while (count > 0 && err >= 0);
+	}
+	up(&dac->sem);
+
+	return err;
+}
+
+static unsigned int hal2_poll(struct file *file, struct poll_table_struct *wait)
+{
+	unsigned long flags;
+	unsigned int mask = 0;
+	struct hal2_card *hal2 = (struct hal2_card *) file->private_data;
+
+	if (file->f_mode & FMODE_READ) {
+		struct hal2_codec *adc = &hal2->adc;
+
+		poll_wait(file, &adc->dma_wait, wait);
+		spin_lock_irqsave(&adc->lock, flags);
+		if (adc->desc[adc->tail].cnt > 0)
+			mask |= POLLIN;
+		spin_unlock_irqrestore(&adc->lock, flags);
+	}
+
+	if (file->f_mode & FMODE_WRITE) {
+		struct hal2_codec *dac = &hal2->dac;
+
+		poll_wait(file, &dac->dma_wait, wait);
+		spin_lock_irqsave(&dac->lock, flags);
+		if (dac->desc[dac->head].cnt == 0)
+			mask |= POLLOUT;
+		spin_unlock_irqrestore(&dac->lock, flags);
+	}
+
+	return mask;
+}
+
+static int hal2_open(struct inode *inode, struct file *file)
+{
+	int err;
+	struct hal2_card *hal2 = hal2_dsp_find_card(iminor(inode));
+
+	if (!hal2)
+		return -ENODEV;
+	file->private_data = hal2;
+	if (file->f_mode & FMODE_READ) {
+		struct hal2_codec *adc = &hal2->adc;
+
+		if (adc->usecount)
+			return -EBUSY;
+		/* OSS spec wanted us to use 8 bit, 8 kHz mono by default,
+		 * but HAL2 can't do 8bit audio */
+		adc->format = AFMT_S16_BE;
+		adc->voices = 1;
+		adc->sample_rate = hal2_compute_rate(adc, 8000);
+		hal2_set_adc_rate(hal2);
+		err = hal2_alloc_adc_dmabuf(adc);
+		if (err)
+			return err;
+		hal2_setup_adc(hal2);
+		adc->usecount++;
+	}
+	if (file->f_mode & FMODE_WRITE) {
+		struct hal2_codec *dac = &hal2->dac;
+
+		if (dac->usecount)
+			return -EBUSY;
+		dac->format = AFMT_S16_BE;
+		dac->voices = 1;
+		dac->sample_rate = hal2_compute_rate(dac, 8000);
+		hal2_set_dac_rate(hal2);
+		err = hal2_alloc_dac_dmabuf(dac);
+		if (err)
+			return err;
+		hal2_setup_dac(hal2);
+		dac->usecount++;
+	}
+
+	return nonseekable_open(inode, file);
+}
+
+static int hal2_release(struct inode *inode, struct file *file)
+{
+	struct hal2_card *hal2 = (struct hal2_card *) file->private_data;
+
+	if (file->f_mode & FMODE_READ) {
+		struct hal2_codec *adc = &hal2->adc;
+
+		down(&adc->sem);
+		hal2_stop_adc(hal2);
+		hal2_free_adc_dmabuf(adc);
+		adc->usecount--;
+		up(&adc->sem);
+	}
+	if (file->f_mode & FMODE_WRITE) {
+		struct hal2_codec *dac = &hal2->dac;
+
+		down(&dac->sem);
+		hal2_sync_dac(hal2);
+		hal2_free_dac_dmabuf(dac);
+		dac->usecount--;
+		up(&dac->sem);
+	}
+
+	return 0;
+}
+
+static struct file_operations hal2_audio_fops = {
+	.owner		= THIS_MODULE,
+	.llseek		= no_llseek,
+	.read		= hal2_read,
+	.write		= hal2_write,
+	.poll		= hal2_poll,
+	.ioctl		= hal2_ioctl,
+	.open		= hal2_open,
+	.release	= hal2_release,
+};
+
+static struct file_operations hal2_mixer_fops = {
+	.owner		= THIS_MODULE,
+	.llseek		= no_llseek,
+	.ioctl		= hal2_ioctl_mixdev,
+	.open		= hal2_open_mixdev,
+	.release	= hal2_release_mixdev,
+};
+
+static void hal2_init_codec(struct hal2_codec *codec, struct hpc3_regs *hpc3,
+			    int index)
+{
+	codec->pbus.pbusnr = index;
+	codec->pbus.pbus = &hpc3->pbdma[index];
+	init_waitqueue_head(&codec->dma_wait);
+	init_MUTEX(&codec->sem);
+	spin_lock_init(&codec->lock);
+}
+
+static int hal2_detect(struct hal2_card *hal2)
+{
+	unsigned short board, major, minor;
+	unsigned short rev;
+
+	/* reset HAL2 */
+	hal2_isr_write(hal2, 0);
+	/* release reset */
+	hal2_isr_write(hal2, H2_ISR_GLOBAL_RESET_N | H2_ISR_CODEC_RESET_N);
+
+	hal2_i_write16(hal2, H2I_RELAY_C, H2I_RELAY_C_STATE); 
+	if ((rev = hal2_rev_look(hal2)) & H2_REV_AUDIO_PRESENT)
+		return -ENODEV;
+
+	board = (rev & H2_REV_BOARD_M) >> 12;
+	major = (rev & H2_REV_MAJOR_CHIP_M) >> 4;
+	minor = (rev & H2_REV_MINOR_CHIP_M);
+
+	printk(KERN_INFO "SGI HAL2 revision %i.%i.%i\n",
+	       board, major, minor);
+
+	return 0;
+}
+
+static int hal2_init_card(struct hal2_card **phal2, struct hpc3_regs *hpc3)
+{
+	int ret = 0;
+	struct hal2_card *hal2;
+
+	hal2 = (struct hal2_card *) kmalloc(sizeof(struct hal2_card), GFP_KERNEL);
+	if (!hal2)
+		return -ENOMEM;
+	memset(hal2, 0, sizeof(struct hal2_card));
+
+	hal2->ctl_regs = (struct hal2_ctl_regs *)hpc3->pbus_extregs[0];
+	hal2->aes_regs = (struct hal2_aes_regs *)hpc3->pbus_extregs[1];
+	hal2->vol_regs = (struct hal2_vol_regs *)hpc3->pbus_extregs[2];
+	hal2->syn_regs = (struct hal2_syn_regs *)hpc3->pbus_extregs[3];
+
+	if (hal2_detect(hal2) < 0) {
+		ret = -ENODEV;
+		goto free_card;
+	}
+
+	hal2_init_codec(&hal2->dac, hpc3, 0);
+	hal2_init_codec(&hal2->adc, hpc3, 1);
+
+	/*
+	 * All DMA channel interfaces in HAL2 are designed to operate with
+	 * PBUS programmed for 2 cycles in D3, 2 cycles in D4 and 2 cycles
+	 * in D5. HAL2 is a 16-bit device which can accept both big and little
+	 * endian format. It assumes that even address bytes are on high
+	 * portion of PBUS (15:8) and assumes that HPC3 is programmed to
+	 * accept a live (unsynchronized) version of P_DREQ_N from HAL2.
+	 */
+#define HAL2_PBUS_DMACFG ((0 << HPC3_DMACFG_D3R_SHIFT) | \
+			  (2 << HPC3_DMACFG_D4R_SHIFT) | \
+			  (2 << HPC3_DMACFG_D5R_SHIFT) | \
+			  (0 << HPC3_DMACFG_D3W_SHIFT) | \
+			  (2 << HPC3_DMACFG_D4W_SHIFT) | \
+			  (2 << HPC3_DMACFG_D5W_SHIFT) | \
+				HPC3_DMACFG_DS16 | \
+				HPC3_DMACFG_EVENHI | \
+				HPC3_DMACFG_RTIME | \
+			  (8 << HPC3_DMACFG_BURST_SHIFT) | \
+				HPC3_DMACFG_DRQLIVE)
+	/*
+	 * Ignore what's mentioned in the specification and write value which
+	 * works in The Real World (TM)
+	 */
+	hpc3->pbus_dmacfg[hal2->dac.pbus.pbusnr][0] = 0x8208844;
+	hpc3->pbus_dmacfg[hal2->adc.pbus.pbusnr][0] = 0x8208844;
+
+	if (request_irq(SGI_HPCDMA_IRQ, hal2_interrupt, SA_SHIRQ,
+			hal2str, hal2)) {
+		printk(KERN_ERR "HAL2: Can't get irq %d\n", SGI_HPCDMA_IRQ);
+		ret = -EAGAIN;
+		goto free_card;
+	}
+
+	hal2->dev_dsp = register_sound_dsp(&hal2_audio_fops, -1);
+	if (hal2->dev_dsp < 0) {
+		ret = hal2->dev_dsp;
+		goto free_irq;
+	}
+
+	hal2->dev_mixer = register_sound_mixer(&hal2_mixer_fops, -1);
+	if (hal2->dev_mixer < 0) {
+		ret = hal2->dev_mixer;
+		goto unregister_dsp;
+	}
+
+	hal2_init_mixer(hal2);
+
+	*phal2 = hal2;
+	return 0;
+unregister_dsp:
+	unregister_sound_dsp(hal2->dev_dsp);
+free_irq:
+	free_irq(SGI_HPCDMA_IRQ, hal2);
+free_card:
+	kfree(hal2);
+
+	return ret;
+}
+
+extern void (*indy_volume_button)(int);
+
+/* 
+ * Assuming only one HAL2 card. Mail me if you ever meet machine with
+ * more than one.
+ */
+static int __init init_hal2(void)
+{
+	int i, error;
+
+	for (i = 0; i < MAXCARDS; i++)
+		hal2_card[i] = NULL;
+
+	error = hal2_init_card(&hal2_card[0], hpc3c0);
+
+	/* let Indy's volume buttons work */
+	if (!error && !ip22_is_fullhouse())
+		indy_volume_button = hal2_volume_control;
+
+	return error;
+
+}
+
+static void __exit exit_hal2(void)
+{
+	int i;
+
+	/* unregister volume butons callback function */
+	indy_volume_button = NULL;
+	
+	for (i = 0; i < MAXCARDS; i++)
+		if (hal2_card[i]) {
+			free_irq(SGI_HPCDMA_IRQ, hal2_card[i]);
+			unregister_sound_dsp(hal2_card[i]->dev_dsp);
+			unregister_sound_mixer(hal2_card[i]->dev_mixer);
+			kfree(hal2_card[i]);
+	}
+}
+
+module_init(init_hal2);
+module_exit(exit_hal2);
+
+MODULE_DESCRIPTION("OSS compatible driver for SGI HAL2 audio");
+MODULE_AUTHOR("Ladislav Michl");
+MODULE_LICENSE("GPL");