Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: (214 commits)
  ALSA: hda - Add pin-fix for HP dc5750
  ALSA: als4000: Fix potentially invalid DMA mode setup
  ALSA: als4000: enable burst mode
  ALSA: hda - Fix initial capsrc selection in patch_alc269()
  ASoC: TWL4030: Capture route runtime DAPM ordering fix
  ALSA: hda - Add PC-beep whitelist for an Intel board
  ALSA: hda - More relax for pending period handling
  ALSA: hda - Define AC_FMT_* constants
  ALSA: hda - Fix beep frequency on IDT 92HD73xx and 92HD71Bxx codecs
  ALSA: hda - Add support for HDMI HBR passthrough
  ALSA: hda - Set Stream Type in Stream Format according to AES0
  ALSA: hda - Fix Thinkpad X300 so SPDIF is not exposed
  ALSA: hda - FIX to not expose SPDIF on Thinkpad X301, since it does not have the ability to use SPDIF
  ASoC: wm9081: fix resource reclaim in wm9081_register error path
  ASoC: wm8978: fix a memory leak if a wm8978_register fail
  ASoC: wm8974: fix a memory leak if another WM8974 is registered
  ASoC: wm8961: fix resource reclaim in wm8961_register error path
  ASoC: wm8955: fix resource reclaim in wm8955_register error path
  ASoC: wm8940: fix a memory leak if wm8940_register return error
  ASoC: wm8904: fix resource reclaim in wm8904_register error path
  ...

1 files changed, 21 insertions, 3 deletions

diff --git a/sound/drivers/Kconfig b/sound/drivers/Kconfig
index c290cee4cee..480c38623da 100644
--- a/sound/drivers/Kconfig
+++ b/sound/drivers/Kconfig
@@ -170,9 +170,25 @@ config SND_AC97_POWER_SAVE
 	  AC97 codecs.  In this mode, the power-mode is dynamically
 	  controlled at each open/close.
 
-	  The mode is activated by passing power_save=1 option to
-	  snd-ac97-codec driver.  You can toggle it dynamically over
-	  sysfs, too.
+	  The mode is activated by passing 'power_save=X' to the
+	  snd-ac97-codec driver module, where 'X' is the time-out
+	  value, a nonnegative integer that specifies how many
+	  seconds of idle time the driver must count before it may
+	  put the AC97 into power-save mode;  a value of 0 (zero)
+	  disables the use of this power-save mode.
+
+	  After the snd-ac97-codec driver module has been loaded,
+	  the 'power_save' parameter can be set via sysfs as follows:
+
+	    echo 10 > /sys/module/snd_ac97_codec/parameters/power_save
+
+	  In this case, the time-out is set to 10 seconds; setting
+	  the time-out to 1 second (the minimum activation value)
+	  isn't recommended because many applications try to reopen
+	  the device frequently.  A value of 10 seconds would be a
+	  good choice for normal operations.
+
+	  See Documentation/sound/alsa/powersave.txt for more details.
 
 config SND_AC97_POWER_SAVE_DEFAULT
 	int "Default time-out for AC97 power-save mode"
@@ -182,4 +198,6 @@ config SND_AC97_POWER_SAVE_DEFAULT
 	  The default time-out value in seconds for AC97 automatic
 	  power-save mode.  0 means to disable the power-save mode.
 
+	  See SND_AC97_POWER_SAVE for more details.
+
 endif	# SND_DRIVERS