Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6

12 files changed, 302 insertions, 52 deletions

diff --git a/net/wireless/core.c b/net/wireless/core.c
index 20db90246de..71b6b3a9cf1 100644
--- a/net/wireless/core.c
+++ b/net/wireless/core.c
@@ -1,7 +1,7 @@
 /*
  * This is the linux wireless configuration interface.
  *
- * Copyright 2006-2009		Johannes Berg <johannes@sipsolutions.net>
+ * Copyright 2006-2010		Johannes Berg <johannes@sipsolutions.net>
  */
 
 #include <linux/if.h>
@@ -31,15 +31,10 @@ MODULE_AUTHOR("Johannes Berg");
 MODULE_LICENSE("GPL");
 MODULE_DESCRIPTION("wireless configuration support");
 
-/* RCU might be appropriate here since we usually
- * only read the list, and that can happen quite
- * often because we need to do it for each command */
+/* RCU-protected (and cfg80211_mutex for writers) */
 LIST_HEAD(cfg80211_rdev_list);
 int cfg80211_rdev_list_generation;
 
-/*
- * This is used to protect the cfg80211_rdev_list
- */
 DEFINE_MUTEX(cfg80211_mutex);
 
 /* for debugfs */
@@ -418,6 +413,18 @@ int wiphy_register(struct wiphy *wiphy)
 	int i;
 	u16 ifmodes = wiphy->interface_modes;
 
+	if (WARN_ON(wiphy->addresses && !wiphy->n_addresses))
+		return -EINVAL;
+
+	if (WARN_ON(wiphy->addresses &&
+		    !is_zero_ether_addr(wiphy->perm_addr) &&
+		    memcmp(wiphy->perm_addr, wiphy->addresses[0].addr,
+			   ETH_ALEN)))
+		return -EINVAL;
+
+	if (wiphy->addresses)
+		memcpy(wiphy->perm_addr, wiphy->addresses[0].addr, ETH_ALEN);
+
 	/* sanity check ifmodes */
 	WARN_ON(!ifmodes);
 	ifmodes &= ((1 << __NL80211_IFTYPE_AFTER_LAST) - 1) & ~1;
@@ -477,7 +484,7 @@ int wiphy_register(struct wiphy *wiphy)
 	/* set up regulatory info */
 	wiphy_update_regulatory(wiphy, NL80211_REGDOM_SET_BY_CORE);
 
-	list_add(&rdev->list, &cfg80211_rdev_list);
+	list_add_rcu(&rdev->list, &cfg80211_rdev_list);
 	cfg80211_rdev_list_generation++;
 
 	mutex_unlock(&cfg80211_mutex);
@@ -554,7 +561,8 @@ void wiphy_unregister(struct wiphy *wiphy)
 	 * it impossible to find from userspace.
 	 */
 	debugfs_remove_recursive(rdev->wiphy.debugfsdir);
-	list_del(&rdev->list);
+	list_del_rcu(&rdev->list);
+	synchronize_rcu();
 
 	/*
 	 * Try to grab rdev->mtx. If a command is still in progress,
@@ -670,7 +678,7 @@ static int cfg80211_netdev_notifier_call(struct notifier_block * nb,
 		INIT_LIST_HEAD(&wdev->event_list);
 		spin_lock_init(&wdev->event_lock);
 		mutex_lock(&rdev->devlist_mtx);
-		list_add(&wdev->list, &rdev->netdev_list);
+		list_add_rcu(&wdev->list, &rdev->netdev_list);
 		rdev->devlist_generation++;
 		/* can only change netns with wiphy */
 		dev->features |= NETIF_F_NETNS_LOCAL;
@@ -782,13 +790,21 @@ static int cfg80211_netdev_notifier_call(struct notifier_block * nb,
 		 */
 		if (!list_empty(&wdev->list)) {
 			sysfs_remove_link(&dev->dev.kobj, "phy80211");
-			list_del_init(&wdev->list);
+			list_del_rcu(&wdev->list);
 			rdev->devlist_generation++;
 #ifdef CONFIG_CFG80211_WEXT
 			kfree(wdev->wext.keys);
 #endif
 		}
 		mutex_unlock(&rdev->devlist_mtx);
+		/*
+		 * synchronise (so that we won't find this netdev
+		 * from other code any more) and then clear the list
+		 * head so that the above code can safely check for
+		 * !list_empty() to avoid double-cleanup.
+		 */
+		synchronize_rcu();
+		INIT_LIST_HEAD(&wdev->list);
 		break;
 	case NETDEV_PRE_UP:
 		if (!(wdev->wiphy->interface_modes & BIT(wdev->iftype)))
diff --git a/net/wireless/core.h b/net/wireless/core.h
index 2d6a6b9c0c4..c326a667022 100644
--- a/net/wireless/core.h
+++ b/net/wireless/core.h
@@ -1,7 +1,7 @@
 /*
  * Wireless configuration interface internals.
  *
- * Copyright 2006-2009	Johannes Berg <johannes@sipsolutions.net>
+ * Copyright 2006-2010	Johannes Berg <johannes@sipsolutions.net>
  */
 #ifndef __NET_WIRELESS_CORE_H
 #define __NET_WIRELESS_CORE_H
@@ -48,6 +48,7 @@ struct cfg80211_registered_device {
 
 	/* associate netdev list */
 	struct mutex devlist_mtx;
+	/* protected by devlist_mtx or RCU */
 	struct list_head netdev_list;
 	int devlist_generation;
 	int opencount; /* also protected by devlist_mtx */
diff --git a/net/wireless/lib80211_crypt_ccmp.c b/net/wireless/lib80211_crypt_ccmp.c
index 2301dc1edc4..b7fa31d5fd1 100644
--- a/net/wireless/lib80211_crypt_ccmp.c
+++ b/net/wireless/lib80211_crypt_ccmp.c
@@ -237,7 +237,6 @@ static int lib80211_ccmp_encrypt(struct sk_buff *skb, int hdr_len, void *priv)
 		return -1;
 
 	pos = skb->data + hdr_len + CCMP_HDR_LEN;
-	mic = skb_put(skb, CCMP_MIC_LEN);
 	hdr = (struct ieee80211_hdr *)skb->data;
 	ccmp_init_blocks(key->tfm, hdr, key->tx_pn, data_len, b0, b, s0);
 
@@ -257,6 +256,7 @@ static int lib80211_ccmp_encrypt(struct sk_buff *skb, int hdr_len, void *priv)
 		pos += len;
 	}
 
+	mic = skb_put(skb, CCMP_MIC_LEN);
 	for (i = 0; i < CCMP_MIC_LEN; i++)
 		mic[i] = b[i] ^ s0[i];
 
diff --git a/net/wireless/lib80211_crypt_tkip.c b/net/wireless/lib80211_crypt_tkip.c
index c36287399d7..8cbdb32ff31 100644
--- a/net/wireless/lib80211_crypt_tkip.c
+++ b/net/wireless/lib80211_crypt_tkip.c
@@ -36,6 +36,8 @@ MODULE_AUTHOR("Jouni Malinen");
 MODULE_DESCRIPTION("lib80211 crypt: TKIP");
 MODULE_LICENSE("GPL");
 
+#define TKIP_HDR_LEN 8
+
 struct lib80211_tkip_data {
 #define TKIP_KEY_LEN 32
 	u8 key[TKIP_KEY_LEN];
@@ -314,13 +316,12 @@ static int lib80211_tkip_hdr(struct sk_buff *skb, int hdr_len,
 			      u8 * rc4key, int keylen, void *priv)
 {
 	struct lib80211_tkip_data *tkey = priv;
-	int len;
 	u8 *pos;
 	struct ieee80211_hdr *hdr;
 
 	hdr = (struct ieee80211_hdr *)skb->data;
 
-	if (skb_headroom(skb) < 8 || skb->len < hdr_len)
+	if (skb_headroom(skb) < TKIP_HDR_LEN || skb->len < hdr_len)
 		return -1;
 
 	if (rc4key == NULL || keylen < 16)
@@ -333,9 +334,8 @@ static int lib80211_tkip_hdr(struct sk_buff *skb, int hdr_len,
 	}
 	tkip_mixing_phase2(rc4key, tkey->key, tkey->tx_ttak, tkey->tx_iv16);
 
-	len = skb->len - hdr_len;
-	pos = skb_push(skb, 8);
-	memmove(pos, pos + 8, hdr_len);
+	pos = skb_push(skb, TKIP_HDR_LEN);
+	memmove(pos, pos + TKIP_HDR_LEN, hdr_len);
 	pos += hdr_len;
 
 	*pos++ = *rc4key;
@@ -353,7 +353,7 @@ static int lib80211_tkip_hdr(struct sk_buff *skb, int hdr_len,
 		tkey->tx_iv32++;
 	}
 
-	return 8;
+	return TKIP_HDR_LEN;
 }
 
 static int lib80211_tkip_encrypt(struct sk_buff *skb, int hdr_len, void *priv)
@@ -384,9 +384,8 @@ static int lib80211_tkip_encrypt(struct sk_buff *skb, int hdr_len, void *priv)
 	if ((lib80211_tkip_hdr(skb, hdr_len, rc4key, 16, priv)) < 0)
 		return -1;
 
-	icv = skb_put(skb, 4);
-
 	crc = ~crc32_le(~0, pos, len);
+	icv = skb_put(skb, 4);
 	icv[0] = crc;
 	icv[1] = crc >> 8;
 	icv[2] = crc >> 16;
@@ -434,7 +433,7 @@ static int lib80211_tkip_decrypt(struct sk_buff *skb, int hdr_len, void *priv)
 		return -1;
 	}
 
-	if (skb->len < hdr_len + 8 + 4)
+	if (skb->len < hdr_len + TKIP_HDR_LEN + 4)
 		return -1;
 
 	pos = skb->data + hdr_len;
@@ -462,7 +461,7 @@ static int lib80211_tkip_decrypt(struct sk_buff *skb, int hdr_len, void *priv)
 	}
 	iv16 = (pos[0] << 8) | pos[2];
 	iv32 = pos[4] | (pos[5] << 8) | (pos[6] << 16) | (pos[7] << 24);
-	pos += 8;
+	pos += TKIP_HDR_LEN;
 
 	if (tkip_replay_check(iv32, iv16, tkey->rx_iv32, tkey->rx_iv16)) {
 #ifdef CONFIG_LIB80211_DEBUG
@@ -523,8 +522,8 @@ static int lib80211_tkip_decrypt(struct sk_buff *skb, int hdr_len, void *priv)
 	tkey->rx_iv16_new = iv16;
 
 	/* Remove IV and ICV */
-	memmove(skb->data + 8, skb->data, hdr_len);
-	skb_pull(skb, 8);
+	memmove(skb->data + TKIP_HDR_LEN, skb->data, hdr_len);
+	skb_pull(skb, TKIP_HDR_LEN);
 	skb_trim(skb, skb->len - 4);
 
 	return keyidx;
diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index 4af7991a9ec..5b79ecf17be 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -3571,6 +3571,7 @@ static int nl80211_associate(struct sk_buff *skb, struct genl_info *info)
 {
 	struct cfg80211_registered_device *rdev;
 	struct net_device *dev;
+	struct wireless_dev *wdev;
 	struct cfg80211_crypto_settings crypto;
 	struct ieee80211_channel *chan, *fixedchan;
 	const u8 *bssid, *ssid, *ie = NULL, *prev_bssid = NULL;
@@ -3616,7 +3617,8 @@ static int nl80211_associate(struct sk_buff *skb, struct genl_info *info)
 	}
 
 	mutex_lock(&rdev->devlist_mtx);
-	fixedchan = rdev_fixed_channel(rdev, NULL);
+	wdev = dev->ieee80211_ptr;
+	fixedchan = rdev_fixed_channel(rdev, wdev);
 	if (fixedchan && chan != fixedchan) {
 		err = -EBUSY;
 		mutex_unlock(&rdev->devlist_mtx);
diff --git a/net/wireless/reg.c b/net/wireless/reg.c
index 5f8071de795..ed89c59bb43 100644
--- a/net/wireless/reg.c
+++ b/net/wireless/reg.c
@@ -134,6 +134,7 @@ static const struct ieee80211_regdomain *cfg80211_world_regdom =
 	&world_regdom;
 
 static char *ieee80211_regdom = "00";
+static char user_alpha2[2];
 
 module_param(ieee80211_regdom, charp, 0444);
 MODULE_PARM_DESC(ieee80211_regdom, "IEEE 802.11 regulatory domain code");
@@ -252,6 +253,27 @@ static bool regdom_changes(const char *alpha2)
 	return true;
 }
 
+/*
+ * The NL80211_REGDOM_SET_BY_USER regdom alpha2 is cached, this lets
+ * you know if a valid regulatory hint with NL80211_REGDOM_SET_BY_USER
+ * has ever been issued.
+ */
+static bool is_user_regdom_saved(void)
+{
+	if (user_alpha2[0] == '9' && user_alpha2[1] == '7')
+		return false;
+
+	/* This would indicate a mistake on the design */
+	if (WARN((!is_world_regdom(user_alpha2) &&
+		  !is_an_alpha2(user_alpha2)),
+		 "Unexpected user alpha2: %c%c\n",
+		 user_alpha2[0],
+	         user_alpha2[1]))
+		return false;
+
+	return true;
+}
+
 /**
  * country_ie_integrity_changes - tells us if the country IE has changed
  * @checksum: checksum of country IE of fields we are interested in
@@ -1646,7 +1668,7 @@ static int ignore_request(struct wiphy *wiphy,
 
 	switch (pending_request->initiator) {
 	case NL80211_REGDOM_SET_BY_CORE:
-		return -EINVAL;
+		return 0;
 	case NL80211_REGDOM_SET_BY_COUNTRY_IE:
 
 		last_wiphy = wiphy_idx_to_wiphy(last_request->wiphy_idx);
@@ -1785,6 +1807,11 @@ new_request:
 
 	pending_request = NULL;
 
+	if (last_request->initiator == NL80211_REGDOM_SET_BY_USER) {
+		user_alpha2[0] = last_request->alpha2[0];
+		user_alpha2[1] = last_request->alpha2[1];
+	}
+
 	/* When r == REG_INTERSECT we do need to call CRDA */
 	if (r < 0) {
 		/*
@@ -1904,12 +1931,16 @@ static void queue_regulatory_request(struct regulatory_request *request)
 	schedule_work(&reg_work);
 }
 
-/* Core regulatory hint -- happens once during cfg80211_init() */
+/*
+ * Core regulatory hint -- happens during cfg80211_init()
+ * and when we restore regulatory settings.
+ */
 static int regulatory_hint_core(const char *alpha2)
 {
 	struct regulatory_request *request;
 
-	BUG_ON(last_request);
+	kfree(last_request);
+	last_request = NULL;
 
 	request = kzalloc(sizeof(struct regulatory_request),
 			  GFP_KERNEL);
@@ -1920,14 +1951,12 @@ static int regulatory_hint_core(const char *alpha2)
 	request->alpha2[1] = alpha2[1];
 	request->initiator = NL80211_REGDOM_SET_BY_CORE;
 
-	queue_regulatory_request(request);
-
 	/*
 	 * This ensures last_request is populated once modules
 	 * come swinging in and calling regulatory hints and
 	 * wiphy_apply_custom_regulatory().
 	 */
-	flush_scheduled_work();
+	reg_process_hint(request);
 
 	return 0;
 }
@@ -2109,6 +2138,123 @@ out:
 	mutex_unlock(&reg_mutex);
 }
 
+static void restore_alpha2(char *alpha2, bool reset_user)
+{
+	/* indicates there is no alpha2 to consider for restoration */
+	alpha2[0] = '9';
+	alpha2[1] = '7';
+
+	/* The user setting has precedence over the module parameter */
+	if (is_user_regdom_saved()) {
+		/* Unless we're asked to ignore it and reset it */
+		if (reset_user) {
+			REG_DBG_PRINT("cfg80211: Restoring regulatory settings "
+			       "including user preference\n");
+			user_alpha2[0] = '9';
+			user_alpha2[1] = '7';
+
+			/*
+			 * If we're ignoring user settings, we still need to
+			 * check the module parameter to ensure we put things
+			 * back as they were for a full restore.
+			 */
+			if (!is_world_regdom(ieee80211_regdom)) {
+				REG_DBG_PRINT("cfg80211: Keeping preference on "
+				       "module parameter ieee80211_regdom: %c%c\n",
+				       ieee80211_regdom[0],
+				       ieee80211_regdom[1]);
+				alpha2[0] = ieee80211_regdom[0];
+				alpha2[1] = ieee80211_regdom[1];
+			}
+		} else {
+			REG_DBG_PRINT("cfg80211: Restoring regulatory settings "
+			       "while preserving user preference for: %c%c\n",
+			       user_alpha2[0],
+			       user_alpha2[1]);
+			alpha2[0] = user_alpha2[0];
+			alpha2[1] = user_alpha2[1];
+		}
+	} else if (!is_world_regdom(ieee80211_regdom)) {
+		REG_DBG_PRINT("cfg80211: Keeping preference on "
+		       "module parameter ieee80211_regdom: %c%c\n",
+		       ieee80211_regdom[0],
+		       ieee80211_regdom[1]);
+		alpha2[0] = ieee80211_regdom[0];
+		alpha2[1] = ieee80211_regdom[1];
+	} else
+		REG_DBG_PRINT("cfg80211: Restoring regulatory settings\n");
+}
+
+/*
+ * Restoring regulatory settings involves ingoring any
+ * possibly stale country IE information and user regulatory
+ * settings if so desired, this includes any beacon hints
+ * learned as we could have traveled outside to another country
+ * after disconnection. To restore regulatory settings we do
+ * exactly what we did at bootup:
+ *
+ *   - send a core regulatory hint
+ *   - send a user regulatory hint if applicable
+ *
+ * Device drivers that send a regulatory hint for a specific country
+ * keep their own regulatory domain on wiphy->regd so that does does
+ * not need to be remembered.
+ */
+static void restore_regulatory_settings(bool reset_user)
+{
+	char alpha2[2];
+	struct reg_beacon *reg_beacon, *btmp;
+
+	mutex_lock(&cfg80211_mutex);
+	mutex_lock(&reg_mutex);
+
+	reset_regdomains();
+	restore_alpha2(alpha2, reset_user);
+
+	/* Clear beacon hints */
+	spin_lock_bh(&reg_pending_beacons_lock);
+	if (!list_empty(&reg_pending_beacons)) {
+		list_for_each_entry_safe(reg_beacon, btmp,
+					 &reg_pending_beacons, list) {
+			list_del(&reg_beacon->list);
+			kfree(reg_beacon);
+		}
+	}
+	spin_unlock_bh(&reg_pending_beacons_lock);
+
+	if (!list_empty(&reg_beacon_list)) {
+		list_for_each_entry_safe(reg_beacon, btmp,
+					 &reg_beacon_list, list) {
+			list_del(&reg_beacon->list);
+			kfree(reg_beacon);
+		}
+	}
+
+	/* First restore to the basic regulatory settings */
+	cfg80211_regdomain = cfg80211_world_regdom;
+
+	mutex_unlock(&reg_mutex);
+	mutex_unlock(&cfg80211_mutex);
+
+	regulatory_hint_core(cfg80211_regdomain->alpha2);
+
+	/*
+	 * This restores the ieee80211_regdom module parameter
+	 * preference or the last user requested regulatory
+	 * settings, user regulatory settings takes precedence.
+	 */
+	if (is_an_alpha2(alpha2))
+		regulatory_hint_user(user_alpha2);
+}
+
+
+void regulatory_hint_disconnect(void)
+{
+	REG_DBG_PRINT("cfg80211: All devices are disconnected, going to "
+		      "restore regulatory settings\n");
+	restore_regulatory_settings(false);
+}
+
 static bool freq_is_chan_12_13_14(u16 freq)
 {
 	if (freq == ieee80211_channel_to_frequency(12) ||
@@ -2498,6 +2644,9 @@ int regulatory_init(void)
 
 	cfg80211_regdomain = cfg80211_world_regdom;
 
+	user_alpha2[0] = '9';
+	user_alpha2[1] = '7';
+
 	/* We always try to get an update for the static regdomain */
 	err = regulatory_hint_core(cfg80211_regdomain->alpha2);
 	if (err) {
diff --git a/net/wireless/reg.h b/net/wireless/reg.h
index 3018508226a..b26224a9f3b 100644
--- a/net/wireless/reg.h
+++ b/net/wireless/reg.h
@@ -63,4 +63,22 @@ void regulatory_hint_11d(struct wiphy *wiphy,
 			 u8 *country_ie,
 			 u8 country_ie_len);
 
+/**
+ * regulatory_hint_disconnect - informs all devices have been disconneted
+ *
+ * Regulotory rules can be enhanced further upon scanning and upon
+ * connection to an AP. These rules become stale if we disconnect
+ * and go to another country, whether or not we suspend and resume.
+ * If we suspend, go to another country and resume we'll automatically
+ * get disconnected shortly after resuming and things will be reset as well.
+ * This routine is a helper to restore regulatory settings to how they were
+ * prior to our first connect attempt. This includes ignoring country IE and
+ * beacon regulatory hints. The ieee80211_regdom module parameter will always
+ * be respected but if a user had set the regulatory domain that will take
+ * precedence.
+ *
+ * Must be called from process context.
+ */
+void regulatory_hint_disconnect(void);
+
 #endif  /* __NET_WIRELESS_REG_H */
diff --git a/net/wireless/scan.c b/net/wireless/scan.c
index 06b0231ee5e..978cac3414b 100644
--- a/net/wireless/scan.c
+++ b/net/wireless/scan.c
@@ -143,9 +143,9 @@ void cfg80211_bss_expire(struct cfg80211_registered_device *dev)
 		dev->bss_generation++;
 }
 
-static u8 *find_ie(u8 num, u8 *ies, int len)
+const u8 *cfg80211_find_ie(u8 eid, const u8 *ies, int len)
 {
-	while (len > 2 && ies[0] != num) {
+	while (len > 2 && ies[0] != eid) {
 		len -= ies[1] + 2;
 		ies += ies[1] + 2;
 	}
@@ -155,11 +155,12 @@ static u8 *find_ie(u8 num, u8 *ies, int len)
 		return NULL;
 	return ies;
 }
+EXPORT_SYMBOL(cfg80211_find_ie);
 
 static int cmp_ies(u8 num, u8 *ies1, size_t len1, u8 *ies2, size_t len2)
 {
-	const u8 *ie1 = find_ie(num, ies1, len1);
-	const u8 *ie2 = find_ie(num, ies2, len2);
+	const u8 *ie1 = cfg80211_find_ie(num, ies1, len1);
+	const u8 *ie2 = cfg80211_find_ie(num, ies2, len2);
 	int r;
 
 	if (!ie1 && !ie2)
@@ -185,9 +186,9 @@ static bool is_bss(struct cfg80211_bss *a,
 	if (!ssid)
 		return true;
 
-	ssidie = find_ie(WLAN_EID_SSID,
-			 a->information_elements,
-			 a->len_information_elements);
+	ssidie = cfg80211_find_ie(WLAN_EID_SSID,
+				  a->information_elements,
+				  a->len_information_elements);
 	if (!ssidie)
 		return false;
 	if (ssidie[1] != ssid_len)
@@ -204,9 +205,9 @@ static bool is_mesh(struct cfg80211_bss *a,
 	if (!is_zero_ether_addr(a->bssid))
 		return false;
 
-	ie = find_ie(WLAN_EID_MESH_ID,
-		     a->information_elements,
-		     a->len_information_elements);
+	ie = cfg80211_find_ie(WLAN_EID_MESH_ID,
+			      a->information_elements,
+			      a->len_information_elements);
 	if (!ie)
 		return false;
 	if (ie[1] != meshidlen)
@@ -214,9 +215,9 @@ static bool is_mesh(struct cfg80211_bss *a,
 	if (memcmp(ie + 2, meshid, meshidlen))
 		return false;
 
-	ie = find_ie(WLAN_EID_MESH_CONFIG,
-		     a->information_elements,
-		     a->len_information_elements);
+	ie = cfg80211_find_ie(WLAN_EID_MESH_CONFIG,
+			      a->information_elements,
+			      a->len_information_elements);
 	if (!ie)
 		return false;
 	if (ie[1] != sizeof(struct ieee80211_meshconf_ie))
@@ -395,11 +396,12 @@ cfg80211_bss_update(struct cfg80211_registered_device *dev,
 
 	if (is_zero_ether_addr(res->pub.bssid)) {
 		/* must be mesh, verify */
-		meshid = find_ie(WLAN_EID_MESH_ID, res->pub.information_elements,
-				 res->pub.len_information_elements);
-		meshcfg = find_ie(WLAN_EID_MESH_CONFIG,
-				  res->pub.information_elements,
-				  res->pub.len_information_elements);
+		meshid = cfg80211_find_ie(WLAN_EID_MESH_ID,
+					  res->pub.information_elements,
+					  res->pub.len_information_elements);
+		meshcfg = cfg80211_find_ie(WLAN_EID_MESH_CONFIG,
+					   res->pub.information_elements,
+					   res->pub.len_information_elements);
 		if (!meshid || !meshcfg ||
 		    meshcfg[1] != sizeof(struct ieee80211_meshconf_ie)) {
 			/* bogus mesh */
diff --git a/net/wireless/sme.c b/net/wireless/sme.c
index 745c37e7992..17fde0da1b0 100644
--- a/net/wireless/sme.c
+++ b/net/wireless/sme.c
@@ -34,6 +34,44 @@ struct cfg80211_conn {
 	bool auto_auth, prev_bssid_valid;
 };
 
+bool cfg80211_is_all_idle(void)
+{
+	struct cfg80211_registered_device *rdev;
+	struct wireless_dev *wdev;
+	bool is_all_idle = true;
+
+	mutex_lock(&cfg80211_mutex);
+
+	/*
+	 * All devices must be idle as otherwise if you are actively
+	 * scanning some new beacon hints could be learned and would
+	 * count as new regulatory hints.
+	 */
+	list_for_each_entry(rdev, &cfg80211_rdev_list, list) {
+		cfg80211_lock_rdev(rdev);
+		list_for_each_entry(wdev, &rdev->netdev_list, list) {
+			wdev_lock(wdev);
+			if (wdev->sme_state != CFG80211_SME_IDLE)
+				is_all_idle = false;
+			wdev_unlock(wdev);
+		}
+		cfg80211_unlock_rdev(rdev);
+	}
+
+	mutex_unlock(&cfg80211_mutex);
+
+	return is_all_idle;
+}
+
+static void disconnect_work(struct work_struct *work)
+{
+	if (!cfg80211_is_all_idle())
+		return;
+
+	regulatory_hint_disconnect();
+}
+
+static DECLARE_WORK(cfg80211_disconnect_work, disconnect_work);
 
 static int cfg80211_conn_scan(struct wireless_dev *wdev)
 {
@@ -658,6 +696,8 @@ void __cfg80211_disconnected(struct net_device *dev, const u8 *ie,
 	wireless_send_event(dev, SIOCGIWAP, &wrqu, NULL);
 	wdev->wext.connect.ssid_len = 0;
 #endif
+
+	schedule_work(&cfg80211_disconnect_work);
 }
 
 void cfg80211_disconnected(struct net_device *dev, u16 reason,
diff --git a/net/wireless/sysfs.c b/net/wireless/sysfs.c
index efe3c5c92b2..9f2cef3e0ca 100644
--- a/net/wireless/sysfs.c
+++ b/net/wireless/sysfs.c
@@ -33,10 +33,30 @@ static ssize_t name ## _show(struct device *dev,			\
 
 SHOW_FMT(index, "%d", wiphy_idx);
 SHOW_FMT(macaddress, "%pM", wiphy.perm_addr);
+SHOW_FMT(address_mask, "%pM", wiphy.addr_mask);
+
+static ssize_t addresses_show(struct device *dev,
+			      struct device_attribute *attr,
+			      char *buf)
+{
+	struct wiphy *wiphy = &dev_to_rdev(dev)->wiphy;
+	char *start = buf;
+	int i;
+
+	if (!wiphy->addresses)
+		return sprintf(buf, "%pM\n", wiphy->perm_addr);
+
+	for (i = 0; i < wiphy->n_addresses; i++)
+		buf += sprintf(buf, "%pM\n", &wiphy->addresses[i].addr);
+
+	return buf - start;
+}
 
 static struct device_attribute ieee80211_dev_attrs[] = {
 	__ATTR_RO(index),
 	__ATTR_RO(macaddress),
+	__ATTR_RO(address_mask),
+	__ATTR_RO(addresses),
 	{}
 };
 
diff --git a/net/wireless/util.c b/net/wireless/util.c
index 23557c1d0a9..be2ab8c59e3 100644
--- a/net/wireless/util.c
+++ b/net/wireless/util.c
@@ -227,8 +227,11 @@ unsigned int ieee80211_hdrlen(__le16 fc)
 	if (ieee80211_is_data(fc)) {
 		if (ieee80211_has_a4(fc))
 			hdrlen = 30;
-		if (ieee80211_is_data_qos(fc))
+		if (ieee80211_is_data_qos(fc)) {
 			hdrlen += IEEE80211_QOS_CTL_LEN;
+			if (ieee80211_has_order(fc))
+				hdrlen += IEEE80211_HT_CTL_LEN;
+		}
 		goto out;
 	}
 
diff --git a/net/wireless/wext-compat.c b/net/wireless/wext-compat.c
index 966d2f01bea..b17eeae448d 100644
--- a/net/wireless/wext-compat.c
+++ b/net/wireless/wext-compat.c
@@ -1214,7 +1214,7 @@ int cfg80211_wext_siwrate(struct net_device *dev,
 
 	memset(&mask, 0, sizeof(mask));
 	fixed = 0;
-	maxrate = 0;
+	maxrate = (u32)-1;
 
 	if (rate->value < 0) {
 		/* nothing */