netfilter: xtables: sort extensions alphabetically in Kconfig

Signed-off-by: Jan Engelhardt <jengelh@medozas.de>
Signed-off-by: Patrick McHardy <kaber@trash.net>

1 files changed, 50 insertions, 50 deletions

diff --git a/net/netfilter/Kconfig b/net/netfilter/Kconfig
index de18bba619f..9ad74e8bc5b 100644
--- a/net/netfilter/Kconfig
+++ b/net/netfilter/Kconfig
@@ -340,6 +340,18 @@ config NETFILTER_XT_TARGET_CONNMARK
 	  <file:Documentation/kbuild/modules.txt>.  The module will be called
 	  ipt_CONNMARK.ko.  If unsure, say `N'.
 
+config NETFILTER_XT_TARGET_CONNSECMARK
+	tristate '"CONNSECMARK" target support'
+	depends on NETFILTER_XTABLES && NF_CONNTRACK && NF_CONNTRACK_SECMARK
+	default m if NETFILTER_ADVANCED=n
+	help
+	  The CONNSECMARK target copies security markings from packets
+	  to connections, and restores security markings from connections
+	  to packets (if the packets are not already marked).  This would
+	  normally be used in conjunction with the SECMARK target.
+
+	  To compile it as a module, choose M here.  If unsure, say N.
+
 config NETFILTER_XT_TARGET_DSCP
 	tristate '"DSCP" and "TOS" target support'
 	depends on NETFILTER_XTABLES
@@ -371,18 +383,6 @@ config NETFILTER_XT_TARGET_MARK
 
 	  To compile it as a module, choose M here.  If unsure, say N.
 
-config NETFILTER_XT_TARGET_NFQUEUE
-	tristate '"NFQUEUE" target Support'
-	depends on NETFILTER_XTABLES
-	depends on NETFILTER_ADVANCED
-	help
-	  This target replaced the old obsolete QUEUE target.
-
-	  As opposed to QUEUE, it supports 65535 different queues,
-	  not just one.
-
-	  To compile it as a module, choose M here.  If unsure, say N.
-
 config NETFILTER_XT_TARGET_NFLOG
 	tristate '"NFLOG" target support'
 	depends on NETFILTER_XTABLES
@@ -395,6 +395,18 @@ config NETFILTER_XT_TARGET_NFLOG
 
 	  To compile it as a module, choose M here.  If unsure, say N.
 
+config NETFILTER_XT_TARGET_NFQUEUE
+	tristate '"NFQUEUE" target Support'
+	depends on NETFILTER_XTABLES
+	depends on NETFILTER_ADVANCED
+	help
+	  This target replaced the old obsolete QUEUE target.
+
+	  As opposed to QUEUE, it supports 65535 different queues,
+	  not just one.
+
+	  To compile it as a module, choose M here.  If unsure, say N.
+
 config NETFILTER_XT_TARGET_NOTRACK
 	tristate  '"NOTRACK" target support'
 	depends on NETFILTER_XTABLES
@@ -459,18 +471,6 @@ config NETFILTER_XT_TARGET_SECMARK
 
 	  To compile it as a module, choose M here.  If unsure, say N.
 
-config NETFILTER_XT_TARGET_CONNSECMARK
-	tristate '"CONNSECMARK" target support'
-	depends on NETFILTER_XTABLES && NF_CONNTRACK && NF_CONNTRACK_SECMARK
-	default m if NETFILTER_ADVANCED=n
-	help
-	  The CONNSECMARK target copies security markings from packets
-	  to connections, and restores security markings from connections
-	  to packets (if the packets are not already marked).  This would
-	  normally be used in conjunction with the SECMARK target.
-
-	  To compile it as a module, choose M here.  If unsure, say N.
-
 config NETFILTER_XT_TARGET_TCPMSS
 	tristate '"TCPMSS" target support'
 	depends on NETFILTER_XTABLES && (IPV6 || IPV6=n)
@@ -607,6 +607,21 @@ config NETFILTER_XT_MATCH_ESP
 
 	  To compile it as a module, choose M here.  If unsure, say N.
 
+config NETFILTER_XT_MATCH_HASHLIMIT
+	tristate '"hashlimit" match support'
+	depends on NETFILTER_XTABLES && (IP6_NF_IPTABLES || IP6_NF_IPTABLES=n)
+	depends on NETFILTER_ADVANCED
+	help
+	  This option adds a `hashlimit' match.
+
+	  As opposed to `limit', this match dynamically creates a hash table
+	  of limit buckets, based on your selection of source/destination
+	  addresses and/or ports.
+
+	  It enables you to express policies like `10kpps for any given
+	  destination address' or `500pps from any given source address'
+	  with a single rule.
+
 config NETFILTER_XT_MATCH_HELPER
 	tristate '"helper" match support'
 	depends on NETFILTER_XTABLES
@@ -671,6 +686,17 @@ config NETFILTER_XT_MATCH_MARK
 
 	  To compile it as a module, choose M here.  If unsure, say N.
 
+config NETFILTER_XT_MATCH_MULTIPORT
+	tristate '"multiport" Multiple port match support'
+	depends on NETFILTER_XTABLES
+	depends on NETFILTER_ADVANCED
+	help
+	  Multiport matching allows you to match TCP or UDP packets based on
+	  a series of source or destination ports: normally a rule can only
+	  match a single range of ports.
+
+	  To compile it as a module, choose M here.  If unsure, say N.
+
 config NETFILTER_XT_MATCH_OWNER
 	tristate '"owner" match support'
 	depends on NETFILTER_XTABLES
@@ -691,17 +717,6 @@ config NETFILTER_XT_MATCH_POLICY
 
 	  To compile it as a module, choose M here.  If unsure, say N.
 
-config NETFILTER_XT_MATCH_MULTIPORT
-	tristate '"multiport" Multiple port match support'
-	depends on NETFILTER_XTABLES
-	depends on NETFILTER_ADVANCED
-	help
-	  Multiport matching allows you to match TCP or UDP packets based on
-	  a series of source or destination ports: normally a rule can only
-	  match a single range of ports.
-
-	  To compile it as a module, choose M here.  If unsure, say N.
-
 config NETFILTER_XT_MATCH_PHYSDEV
 	tristate '"physdev" match support'
 	depends on NETFILTER_XTABLES && BRIDGE && BRIDGE_NETFILTER
@@ -884,20 +899,5 @@ config NETFILTER_XT_MATCH_U32
 
 	  Details and examples are in the kernel module source.
 
-config NETFILTER_XT_MATCH_HASHLIMIT
-	tristate '"hashlimit" match support'
-	depends on NETFILTER_XTABLES && (IP6_NF_IPTABLES || IP6_NF_IPTABLES=n)
-	depends on NETFILTER_ADVANCED
-	help
-	  This option adds a `hashlimit' match.
-
-	  As opposed to `limit', this match dynamically creates a hash table
-	  of limit buckets, based on your selection of source/destination
-	  addresses and/or ports.
-
-	  It enables you to express policies like `10kpps for any given
-	  destination address' or `500pps from any given source address'
-	  with a single rule.
-
 endmenu