mac80211: clean up rate control API

Long awaited, hard work. This patch totally cleans up the rate control
API to remove the requirement to include internal headers outside of
net/mac80211/.

There's one internal use in the PID algorithm left for mesh networking,
we'll have to figure out a way to clean that one up and decide how to
do the peer link evaluation, possibly independent of the rate control
algorithm or via new API.

Additionally, ath9k is left using the cross-inclusion hack for now, we
will add new API where necessary to make this work properly, but right
now I'm not expert enough to do it. It's still off better than before.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

1 files changed, 26 insertions, 76 deletions

diff --git a/net/mac80211/rate.h b/net/mac80211/rate.h
index 5f18c27eb90..eb94e584d24 100644
--- a/net/mac80211/rate.h
+++ b/net/mac80211/rate.h
@@ -19,77 +19,48 @@
 #include "ieee80211_i.h"
 #include "sta_info.h"
 
-/**
- * struct rate_selection - rate selection for rate control algos
- * @rate: selected transmission rate index
- * @nonerp: Non-ERP rate to use instead if ERP cannot be used
- * @probe: rate for probing (or -1)
- *
- */
-struct rate_selection {
-	s8 rate_idx, nonerp_idx, probe_idx;
-};
-
-struct rate_control_ops {
-	struct module *module;
-	const char *name;
-	void (*tx_status)(void *priv, struct net_device *dev,
-			  struct sk_buff *skb);
-	void (*get_rate)(void *priv, struct net_device *dev,
-			 struct ieee80211_supported_band *band,
-			 struct sk_buff *skb,
-			 struct rate_selection *sel);
-	void (*rate_init)(void *priv, void *priv_sta,
-			  struct ieee80211_local *local, struct sta_info *sta);
-	void (*clear)(void *priv);
-
-	void *(*alloc)(struct ieee80211_local *local);
-	void (*free)(void *priv);
-	void *(*alloc_sta)(void *priv, gfp_t gfp);
-	void (*free_sta)(void *priv, void *priv_sta);
-
-	int (*add_attrs)(void *priv, struct kobject *kobj);
-	void (*remove_attrs)(void *priv, struct kobject *kobj);
-	void (*add_sta_debugfs)(void *priv, void *priv_sta,
-				struct dentry *dir);
-	void (*remove_sta_debugfs)(void *priv, void *priv_sta);
-};
-
 struct rate_control_ref {
+	struct ieee80211_local *local;
 	struct rate_control_ops *ops;
 	void *priv;
 	struct kref kref;
 };
 
-int ieee80211_rate_control_register(struct rate_control_ops *ops);
-void ieee80211_rate_control_unregister(struct rate_control_ops *ops);
-
 /* Get a reference to the rate control algorithm. If `name' is NULL, get the
  * first available algorithm. */
 struct rate_control_ref *rate_control_alloc(const char *name,
 					    struct ieee80211_local *local);
-void rate_control_get_rate(struct net_device *dev,
+void rate_control_get_rate(struct ieee80211_sub_if_data *sdata,
 			   struct ieee80211_supported_band *sband,
-			   struct sk_buff *skb,
+			   struct sta_info *sta, struct sk_buff *skb,
 			   struct rate_selection *sel);
 struct rate_control_ref *rate_control_get(struct rate_control_ref *ref);
 void rate_control_put(struct rate_control_ref *ref);
 
-static inline void rate_control_tx_status(struct net_device *dev,
+static inline void rate_control_tx_status(struct ieee80211_local *local,
+					  struct ieee80211_supported_band *sband,
+					  struct sta_info *sta,
 					  struct sk_buff *skb)
 {
-	struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
 	struct rate_control_ref *ref = local->rate_ctrl;
+	struct ieee80211_sta *ista = &sta->sta;
+	void *priv_sta = sta->rate_ctrl_priv;
 
-	ref->ops->tx_status(ref->priv, dev, skb);
+	ref->ops->tx_status(ref->priv, sband, ista, priv_sta, skb);
 }
 
 
-static inline void rate_control_rate_init(struct sta_info *sta,
-					  struct ieee80211_local *local)
+static inline void rate_control_rate_init(struct sta_info *sta)
 {
+	struct ieee80211_local *local = sta->sdata->local;
 	struct rate_control_ref *ref = sta->rate_ctrl;
-	ref->ops->rate_init(ref->priv, sta->rate_ctrl_priv, local, sta);
+	struct ieee80211_sta *ista = &sta->sta;
+	void *priv_sta = sta->rate_ctrl_priv;
+	struct ieee80211_supported_band *sband;
+
+	sband = local->hw.wiphy->bands[local->hw.conf.channel->band];
+
+	ref->ops->rate_init(ref->priv, sband, ista, priv_sta);
 }
 
 
@@ -100,15 +71,19 @@ static inline void rate_control_clear(struct ieee80211_local *local)
 }
 
 static inline void *rate_control_alloc_sta(struct rate_control_ref *ref,
+					   struct ieee80211_sta *sta,
 					   gfp_t gfp)
 {
-	return ref->ops->alloc_sta(ref->priv, gfp);
+	return ref->ops->alloc_sta(ref->priv, sta, gfp);
 }
 
-static inline void rate_control_free_sta(struct rate_control_ref *ref,
-					 void *priv)
+static inline void rate_control_free_sta(struct sta_info *sta)
 {
-	ref->ops->free_sta(ref->priv, priv);
+	struct rate_control_ref *ref = sta->rate_ctrl;
+	struct ieee80211_sta *ista = &sta->sta;
+	void *priv_sta = sta->rate_ctrl_priv;
+
+	ref->ops->free_sta(ref->priv, ista, priv_sta);
 }
 
 static inline void rate_control_add_sta_debugfs(struct sta_info *sta)
@@ -130,31 +105,6 @@ static inline void rate_control_remove_sta_debugfs(struct sta_info *sta)
 #endif
 }
 
-static inline int rate_supported(struct sta_info *sta,
-				 enum ieee80211_band band,
-				 int index)
-{
-	return (sta == NULL || sta->sta.supp_rates[band] & BIT(index));
-}
-
-static inline s8
-rate_lowest_index(struct ieee80211_local *local,
-		  struct ieee80211_supported_band *sband,
-		  struct sta_info *sta)
-{
-	int i;
-
-	for (i = 0; i < sband->n_bitrates; i++)
-		if (rate_supported(sta, sband->band, i))
-			return i;
-
-	/* warn when we cannot find a rate. */
-	WARN_ON(1);
-
-	return 0;
-}
-
-
 /* functions for rate control related to a device */
 int ieee80211_init_rate_ctrl_alg(struct ieee80211_local *local,
 				 const char *name);