Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

21 files changed, 7071 insertions, 0 deletions

diff --git a/net/ax25/Kconfig b/net/ax25/Kconfig
new file mode 100644
index 00000000000..a8993a04172
--- /dev/null
+++ b/net/ax25/Kconfig
@@ -0,0 +1,110 @@
+#
+# Amateur Radio protocols and AX.25 device configuration
+#
+# 19971130	Now in an own category to make correct compilation of the
+#		AX.25 stuff easier...
+#		Joerg Reuter DL1BKE <jreuter@yaina.de>
+# 19980129	Moved to net/ax25/Config.in, sourcing device drivers.
+
+menuconfig HAMRADIO
+	depends on NET
+	bool "Amateur Radio support"
+	help
+	  If you want to connect your Linux box to an amateur radio, answer Y
+	  here. You want to read <http://www.tapr.org/tapr/html/pkthome.html> and
+	  the AX25-HOWTO, available from <http://www.tldp.org/docs.html#howto>.
+
+	  Note that the answer to this question won't directly affect the
+	  kernel: saying N will just cause the configurator to skip all
+	  the questions about amateur radio.
+
+comment "Packet Radio protocols"
+	depends on HAMRADIO && NET
+
+config AX25
+	tristate "Amateur Radio AX.25 Level 2 protocol"
+	depends on HAMRADIO && NET
+	---help---
+	  This is the protocol used for computer communication over amateur
+	  radio. It is either used by itself for point-to-point links, or to
+	  carry other protocols such as tcp/ip. To use it, you need a device
+	  that connects your Linux box to your amateur radio. You can either
+	  use a low speed TNC (a Terminal Node Controller acts as a kind of
+	  modem connecting your computer's serial port to your radio's
+	  microphone input and speaker output) supporting the KISS protocol or
+	  one of the various SCC cards that are supported by the generic Z8530
+	  or the DMA SCC driver. Another option are the Baycom modem serial
+	  and parallel port hacks or the sound card modem (supported by their
+	  own drivers). If you say Y here, you also have to say Y to one of
+	  those drivers.
+
+	  Information about where to get supporting software for Linux amateur
+	  radio as well as information about how to configure an AX.25 port is
+	  contained in the AX25-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>. You might also want to
+	  check out the file <file:Documentation/networking/ax25.txt> in the
+	  kernel source. More information about digital amateur radio in
+	  general is on the WWW at
+	  <http://www.tapr.org/tapr/html/pkthome.html>.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called ax25.
+
+config AX25_DAMA_SLAVE
+	bool "AX.25 DAMA Slave support"
+	depends on AX25
+	help
+	  DAMA is a mechanism to prevent collisions when doing AX.25
+	  networking. A DAMA server (called "master") accepts incoming traffic
+	  from clients (called "slaves") and redistributes it to other slaves.
+	  If you say Y here, your Linux box will act as a DAMA slave; this is
+	  transparent in that you don't have to do any special DAMA
+	  configuration. (Linux cannot yet act as a DAMA server.) If unsure,
+	  say N.
+
+#	 bool '    AX.25 DAMA Master support' CONFIG_AX25_DAMA_MASTER
+config NETROM
+	tristate "Amateur Radio NET/ROM protocol"
+	depends on AX25
+	---help---
+	  NET/ROM is a network layer protocol on top of AX.25 useful for
+	  routing.
+
+	  A comprehensive listing of all the software for Linux amateur radio
+	  users as well as information about how to configure an AX.25 port is
+	  contained in the AX25-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>. You also might want to
+	  check out the file <file:Documentation/networking/ax25.txt>. More
+	  information about digital amateur radio in general is on the WWW at
+	  <http://www.tapr.org/tapr/html/pkthome.html>.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called netrom.
+
+config ROSE
+	tristate "Amateur Radio X.25 PLP (Rose)"
+	depends on AX25
+	---help---
+	  The Packet Layer Protocol (PLP) is a way to route packets over X.25
+	  connections in general and amateur radio AX.25 connections in
+	  particular, essentially an alternative to NET/ROM.
+
+	  A comprehensive listing of all the software for Linux amateur radio
+	  users as well as information about how to configure an AX.25 port is
+	  contained in the AX25-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>.  You also might want to
+	  check out the file <file:Documentation/networking/ax25.txt>. More
+	  information about digital amateur radio in general is on the WWW at
+	  <http://www.tapr.org/tapr/html/pkthome.html>.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called rose.
+
+
+menu "AX.25 network device drivers"
+	depends on HAMRADIO && NET && AX25!=n
+
+source "drivers/net/hamradio/Kconfig"
+
+endmenu
+
diff --git a/net/ax25/Makefile b/net/ax25/Makefile
new file mode 100644
index 00000000000..43c46d2cafb
--- /dev/null
+++ b/net/ax25/Makefile
@@ -0,0 +1,11 @@
+#
+# Makefile for the Linux AX.25 layer.
+#
+
+obj-$(CONFIG_AX25) += ax25.o
+
+ax25-y	 := ax25_addr.o ax25_dev.o ax25_iface.o ax25_in.o ax25_ip.o ax25_out.o \
+	    ax25_route.o ax25_std_in.o ax25_std_subr.o ax25_std_timer.o \
+	    ax25_subr.o ax25_timer.o ax25_uid.o af_ax25.o
+ax25-$(CONFIG_AX25_DAMA_SLAVE) += ax25_ds_in.o ax25_ds_subr.o ax25_ds_timer.o
+ax25-$(CONFIG_SYSCTL) += sysctl_net_ax25.o
diff --git a/net/ax25/TODO b/net/ax25/TODO
new file mode 100644
index 00000000000..4089c49e45c
--- /dev/null
+++ b/net/ax25/TODO
@@ -0,0 +1,24 @@
+Do the ax25_list_lock, ax25_dev_lock, linkfail_lockreally, ax25_frag_lock and
+listen_lock have to be bh-safe?
+
+Do the netrom and rose locks have to be bh-safe?
+
+A device might be deleted after lookup in the SIOCADDRT ioctl but before it's
+being used.
+
+Routes to a device being taken down might be deleted by ax25_rt_device_down
+but added by somebody else before the device has been deleted fully.
+
+Massive amounts of lock_kernel / unlock_kernel are just a temporary solution to
+get around the removal of SOCKOPS_WRAP.  A serious locking strategy has to be
+implemented.
+
+The ax25_rt_find_route synopsys is pervert but I somehow had to deal with
+the race caused by the static variable in it's previous implementation.
+
+Implement proper socket locking in netrom and rose.
+
+Check socket locking when ax25_rcv is sending to raw sockets.  In particular
+ax25_send_to_raw() seems fishy.  Heck - ax25_rcv is fishy.
+
+Handle XID and TEST frames properly.
diff --git a/net/ax25/af_ax25.c b/net/ax25/af_ax25.c
new file mode 100644
index 00000000000..33b1a376302
--- /dev/null
+++ b/net/ax25/af_ax25.c
@@ -0,0 +1,2050 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * Copyright (C) Alan Cox GW4PTS (alan@lxorguk.ukuu.org.uk)
+ * Copyright (C) Jonathan Naylor G4KLX (g4klx@g4klx.demon.co.uk)
+ * Copyright (C) Darryl Miles G7LED (dlm@g7led.demon.co.uk)
+ * Copyright (C) Steven Whitehouse GW7RRM (stevew@acm.org)
+ * Copyright (C) Joerg Reuter DL1BKE (jreuter@yaina.de)
+ * Copyright (C) Hans-Joachim Hetscher DD8NE (dd8ne@bnv-bamberg.de)
+ * Copyright (C) Hans Alblas PE1AYX (hans@esrac.ele.tue.nl)
+ * Copyright (C) Frederic Rible F1OAT (frible@teaser.fr)
+ */
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/errno.h>
+#include <linux/types.h>
+#include <linux/socket.h>
+#include <linux/in.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/timer.h>
+#include <linux/string.h>
+#include <linux/smp_lock.h>
+#include <linux/sockios.h>
+#include <linux/net.h>
+#include <net/ax25.h>
+#include <linux/inet.h>
+#include <linux/netdevice.h>
+#include <linux/if_arp.h>
+#include <linux/skbuff.h>
+#include <net/sock.h>
+#include <asm/uaccess.h>
+#include <asm/system.h>
+#include <linux/fcntl.h>
+#include <linux/termios.h>	/* For TIOCINQ/OUTQ */
+#include <linux/mm.h>
+#include <linux/interrupt.h>
+#include <linux/notifier.h>
+#include <linux/proc_fs.h>
+#include <linux/stat.h>
+#include <linux/netfilter.h>
+#include <linux/sysctl.h>
+#include <linux/init.h>
+#include <linux/spinlock.h>
+#include <net/tcp.h>
+#include <net/ip.h>
+#include <net/arp.h>
+
+
+
+HLIST_HEAD(ax25_list);
+DEFINE_SPINLOCK(ax25_list_lock);
+
+static struct proto_ops ax25_proto_ops;
+
+static void ax25_free_sock(struct sock *sk)
+{
+	ax25_cb_put(ax25_sk(sk));
+}
+
+/*
+ *	Socket removal during an interrupt is now safe.
+ */
+static void ax25_cb_del(ax25_cb *ax25)
+{
+	if (!hlist_unhashed(&ax25->ax25_node)) {
+		spin_lock_bh(&ax25_list_lock);
+		hlist_del_init(&ax25->ax25_node);
+		spin_unlock_bh(&ax25_list_lock);
+		ax25_cb_put(ax25);
+	}
+}
+
+/*
+ *	Kill all bound sockets on a dropped device.
+ */
+static void ax25_kill_by_device(struct net_device *dev)
+{
+	ax25_dev *ax25_dev;
+	ax25_cb *s;
+	struct hlist_node *node;
+
+	if ((ax25_dev = ax25_dev_ax25dev(dev)) == NULL)
+		return;
+
+	spin_lock_bh(&ax25_list_lock);
+	ax25_for_each(s, node, &ax25_list) {
+		if (s->ax25_dev == ax25_dev) {
+			s->ax25_dev = NULL;
+			ax25_disconnect(s, ENETUNREACH);
+		}
+	}
+	spin_unlock_bh(&ax25_list_lock);
+}
+
+/*
+ *	Handle device status changes.
+ */
+static int ax25_device_event(struct notifier_block *this, unsigned long event,
+	void *ptr)
+{
+	struct net_device *dev = (struct net_device *)ptr;
+
+	/* Reject non AX.25 devices */
+	if (dev->type != ARPHRD_AX25)
+		return NOTIFY_DONE;
+
+	switch (event) {
+	case NETDEV_UP:
+		ax25_dev_device_up(dev);
+		break;
+	case NETDEV_DOWN:
+		ax25_kill_by_device(dev);
+		ax25_rt_device_down(dev);
+		ax25_dev_device_down(dev);
+		break;
+	default:
+		break;
+	}
+
+	return NOTIFY_DONE;
+}
+
+/*
+ *	Add a socket to the bound sockets list.
+ */
+void ax25_cb_add(ax25_cb *ax25)
+{
+	spin_lock_bh(&ax25_list_lock);
+	ax25_cb_hold(ax25);
+	hlist_add_head(&ax25->ax25_node, &ax25_list);
+	spin_unlock_bh(&ax25_list_lock);
+}
+
+/*
+ *	Find a socket that wants to accept the SABM we have just
+ *	received.
+ */
+struct sock *ax25_find_listener(ax25_address *addr, int digi,
+	struct net_device *dev, int type)
+{
+	ax25_cb *s;
+	struct hlist_node *node;
+
+	spin_lock_bh(&ax25_list_lock);
+	ax25_for_each(s, node, &ax25_list) {
+		if ((s->iamdigi && !digi) || (!s->iamdigi && digi))
+			continue;
+		if (s->sk && !ax25cmp(&s->source_addr, addr) &&
+		    s->sk->sk_type == type && s->sk->sk_state == TCP_LISTEN) {
+			/* If device is null we match any device */
+			if (s->ax25_dev == NULL || s->ax25_dev->dev == dev) {
+				sock_hold(s->sk);
+				spin_unlock_bh(&ax25_list_lock);
+				return s->sk;
+			}
+		}
+	}
+	spin_unlock_bh(&ax25_list_lock);
+
+	return NULL;
+}
+
+/*
+ *	Find an AX.25 socket given both ends.
+ */
+struct sock *ax25_get_socket(ax25_address *my_addr, ax25_address *dest_addr,
+	int type)
+{
+	struct sock *sk = NULL;
+	ax25_cb *s;
+	struct hlist_node *node;
+
+	spin_lock_bh(&ax25_list_lock);
+	ax25_for_each(s, node, &ax25_list) {
+		if (s->sk && !ax25cmp(&s->source_addr, my_addr) &&
+		    !ax25cmp(&s->dest_addr, dest_addr) &&
+		    s->sk->sk_type == type) {
+			sk = s->sk;
+			sock_hold(sk);
+			break;
+		}
+	}
+
+	spin_unlock_bh(&ax25_list_lock);
+
+	return sk;
+}
+
+/*
+ *	Find an AX.25 control block given both ends. It will only pick up
+ *	floating AX.25 control blocks or non Raw socket bound control blocks.
+ */
+ax25_cb *ax25_find_cb(ax25_address *src_addr, ax25_address *dest_addr,
+	ax25_digi *digi, struct net_device *dev)
+{
+	ax25_cb *s;
+	struct hlist_node *node;
+
+	spin_lock_bh(&ax25_list_lock);
+	ax25_for_each(s, node, &ax25_list) {
+		if (s->sk && s->sk->sk_type != SOCK_SEQPACKET)
+			continue;
+		if (s->ax25_dev == NULL)
+			continue;
+		if (ax25cmp(&s->source_addr, src_addr) == 0 && ax25cmp(&s->dest_addr, dest_addr) == 0 && s->ax25_dev->dev == dev) {
+			if (digi != NULL && digi->ndigi != 0) {
+				if (s->digipeat == NULL)
+					continue;
+				if (ax25digicmp(s->digipeat, digi) != 0)
+					continue;
+			} else {
+				if (s->digipeat != NULL && s->digipeat->ndigi != 0)
+					continue;
+			}
+			ax25_cb_hold(s);
+			spin_unlock_bh(&ax25_list_lock);
+
+			return s;
+		}
+	}
+	spin_unlock_bh(&ax25_list_lock);
+
+	return NULL;
+}
+
+void ax25_send_to_raw(ax25_address *addr, struct sk_buff *skb, int proto)
+{
+	ax25_cb *s;
+	struct sk_buff *copy;
+	struct hlist_node *node;
+
+	spin_lock_bh(&ax25_list_lock);
+	ax25_for_each(s, node, &ax25_list) {
+		if (s->sk != NULL && ax25cmp(&s->source_addr, addr) == 0 &&
+		    s->sk->sk_type == SOCK_RAW &&
+		    s->sk->sk_protocol == proto &&
+		    s->ax25_dev->dev == skb->dev &&
+		    atomic_read(&s->sk->sk_rmem_alloc) <= s->sk->sk_rcvbuf) {
+			if ((copy = skb_clone(skb, GFP_ATOMIC)) == NULL)
+				continue;
+			if (sock_queue_rcv_skb(s->sk, copy) != 0)
+				kfree_skb(copy);
+		}
+	}
+	spin_unlock_bh(&ax25_list_lock);
+}
+
+/*
+ *	Deferred destroy.
+ */
+void ax25_destroy_socket(ax25_cb *);
+
+/*
+ *	Handler for deferred kills.
+ */
+static void ax25_destroy_timer(unsigned long data)
+{
+	ax25_cb *ax25=(ax25_cb *)data;
+	struct sock *sk;
+	
+	sk=ax25->sk;
+	
+	bh_lock_sock(sk);
+	sock_hold(sk);
+	ax25_destroy_socket(ax25);
+	bh_unlock_sock(sk);
+	sock_put(sk);
+}
+
+/*
+ *	This is called from user mode and the timers. Thus it protects itself
+ *	against interrupt users but doesn't worry about being called during
+ *	work. Once it is removed from the queue no interrupt or bottom half
+ *	will touch it and we are (fairly 8-) ) safe.
+ */
+void ax25_destroy_socket(ax25_cb *ax25)
+{
+	struct sk_buff *skb;
+
+	ax25_cb_del(ax25);
+
+	ax25_stop_heartbeat(ax25);
+	ax25_stop_t1timer(ax25);
+	ax25_stop_t2timer(ax25);
+	ax25_stop_t3timer(ax25);
+	ax25_stop_idletimer(ax25);
+
+	ax25_clear_queues(ax25);	/* Flush the queues */
+
+	if (ax25->sk != NULL) {
+		while ((skb = skb_dequeue(&ax25->sk->sk_receive_queue)) != NULL) {
+			if (skb->sk != ax25->sk) {
+				/* A pending connection */
+				ax25_cb *sax25 = ax25_sk(skb->sk);
+
+				/* Queue the unaccepted socket for death */
+				sock_orphan(skb->sk);
+
+				ax25_start_heartbeat(sax25);
+				sax25->state = AX25_STATE_0;
+			}
+
+			kfree_skb(skb);
+		}
+		skb_queue_purge(&ax25->sk->sk_write_queue);
+	}
+
+	if (ax25->sk != NULL) {
+		if (atomic_read(&ax25->sk->sk_wmem_alloc) ||
+		    atomic_read(&ax25->sk->sk_rmem_alloc)) {
+			/* Defer: outstanding buffers */
+			init_timer(&ax25->dtimer);
+			ax25->dtimer.expires  = jiffies + 2 * HZ;
+			ax25->dtimer.function = ax25_destroy_timer;
+			ax25->dtimer.data     = (unsigned long)ax25;
+			add_timer(&ax25->dtimer);
+		} else {
+			struct sock *sk=ax25->sk;
+			ax25->sk=NULL;
+			sock_put(sk);
+		}
+	} else {
+		ax25_cb_put(ax25);
+	}
+}
+
+/*
+ * dl1bke 960311: set parameters for existing AX.25 connections,
+ *		  includes a KILL command to abort any connection.
+ *		  VERY useful for debugging ;-)
+ */
+static int ax25_ctl_ioctl(const unsigned int cmd, void __user *arg)
+{
+	struct ax25_ctl_struct ax25_ctl;
+	ax25_digi digi;
+	ax25_dev *ax25_dev;
+	ax25_cb *ax25;
+	unsigned int k;
+
+	if (copy_from_user(&ax25_ctl, arg, sizeof(ax25_ctl)))
+		return -EFAULT;
+
+	if ((ax25_dev = ax25_addr_ax25dev(&ax25_ctl.port_addr)) == NULL)
+		return -ENODEV;
+
+	if (ax25_ctl.digi_count > AX25_MAX_DIGIS)
+		return -EINVAL;
+
+	digi.ndigi = ax25_ctl.digi_count;
+	for (k = 0; k < digi.ndigi; k++)
+		digi.calls[k] = ax25_ctl.digi_addr[k];
+
+	if ((ax25 = ax25_find_cb(&ax25_ctl.source_addr, &ax25_ctl.dest_addr, &digi, ax25_dev->dev)) == NULL)
+		return -ENOTCONN;
+
+	switch (ax25_ctl.cmd) {
+	case AX25_KILL:
+		ax25_send_control(ax25, AX25_DISC, AX25_POLLON, AX25_COMMAND);
+#ifdef CONFIG_AX25_DAMA_SLAVE
+		if (ax25_dev->dama.slave && ax25->ax25_dev->values[AX25_VALUES_PROTOCOL] == AX25_PROTO_DAMA_SLAVE)
+			ax25_dama_off(ax25);
+#endif
+		ax25_disconnect(ax25, ENETRESET);
+		break;
+
+  	case AX25_WINDOW:
+  		if (ax25->modulus == AX25_MODULUS) {
+  			if (ax25_ctl.arg < 1 || ax25_ctl.arg > 7)
+  				return -EINVAL;
+  		} else {
+  			if (ax25_ctl.arg < 1 || ax25_ctl.arg > 63)
+  				return -EINVAL;
+  		}
+  		ax25->window = ax25_ctl.arg;
+  		break;
+
+  	case AX25_T1:
+		if (ax25_ctl.arg < 1)
+  			return -EINVAL;
+  		ax25->rtt = (ax25_ctl.arg * HZ) / 2;
+  		ax25->t1  = ax25_ctl.arg * HZ;
+  		break;
+
+  	case AX25_T2:
+  		if (ax25_ctl.arg < 1)
+  			return -EINVAL;
+  		ax25->t2 = ax25_ctl.arg * HZ;
+  		break;
+
+  	case AX25_N2:
+  		if (ax25_ctl.arg < 1 || ax25_ctl.arg > 31)
+			return -EINVAL;
+  		ax25->n2count = 0;
+  		ax25->n2 = ax25_ctl.arg;
+  		break;
+
+  	case AX25_T3:
+  		if (ax25_ctl.arg < 0)
+  			return -EINVAL;
+  		ax25->t3 = ax25_ctl.arg * HZ;
+  		break;
+
+  	case AX25_IDLE:
+  		if (ax25_ctl.arg < 0)
+  			return -EINVAL;
+  		ax25->idle = ax25_ctl.arg * 60 * HZ;
+  		break;
+
+  	case AX25_PACLEN:
+  		if (ax25_ctl.arg < 16 || ax25_ctl.arg > 65535)
+  			return -EINVAL;
+  		ax25->paclen = ax25_ctl.arg;
+  		break;
+
+  	default:
+  		return -EINVAL;
+	  }
+
+	return 0;
+}
+
+/*
+ *	Fill in a created AX.25 created control block with the default
+ *	values for a particular device.
+ */
+void ax25_fillin_cb(ax25_cb *ax25, ax25_dev *ax25_dev)
+{
+	ax25->ax25_dev = ax25_dev;
+
+	if (ax25->ax25_dev != NULL) {
+		ax25->rtt     = ax25_dev->values[AX25_VALUES_T1] / 2;
+		ax25->t1      = ax25_dev->values[AX25_VALUES_T1];
+		ax25->t2      = ax25_dev->values[AX25_VALUES_T2];
+		ax25->t3      = ax25_dev->values[AX25_VALUES_T3];
+		ax25->n2      = ax25_dev->values[AX25_VALUES_N2];
+		ax25->paclen  = ax25_dev->values[AX25_VALUES_PACLEN];
+		ax25->idle    = ax25_dev->values[AX25_VALUES_IDLE];
+		ax25->backoff = ax25_dev->values[AX25_VALUES_BACKOFF];
+
+		if (ax25_dev->values[AX25_VALUES_AXDEFMODE]) {
+			ax25->modulus = AX25_EMODULUS;
+			ax25->window  = ax25_dev->values[AX25_VALUES_EWINDOW];
+		} else {
+			ax25->modulus = AX25_MODULUS;
+			ax25->window  = ax25_dev->values[AX25_VALUES_WINDOW];
+		}
+	} else {
+		ax25->rtt     = AX25_DEF_T1 / 2;
+		ax25->t1      = AX25_DEF_T1;
+		ax25->t2      = AX25_DEF_T2;
+		ax25->t3      = AX25_DEF_T3;
+		ax25->n2      = AX25_DEF_N2;
+		ax25->paclen  = AX25_DEF_PACLEN;
+		ax25->idle    = AX25_DEF_IDLE;
+		ax25->backoff = AX25_DEF_BACKOFF;
+
+		if (AX25_DEF_AXDEFMODE) {
+			ax25->modulus = AX25_EMODULUS;
+			ax25->window  = AX25_DEF_EWINDOW;
+		} else {
+			ax25->modulus = AX25_MODULUS;
+			ax25->window  = AX25_DEF_WINDOW;
+		}
+	}
+}
+
+/*
+ * Create an empty AX.25 control block.
+ */
+ax25_cb *ax25_create_cb(void)
+{
+	ax25_cb *ax25;
+
+	if ((ax25 = kmalloc(sizeof(*ax25), GFP_ATOMIC)) == NULL)
+		return NULL;
+
+	memset(ax25, 0x00, sizeof(*ax25));
+	atomic_set(&ax25->refcount, 1);
+
+	skb_queue_head_init(&ax25->write_queue);
+	skb_queue_head_init(&ax25->frag_queue);
+	skb_queue_head_init(&ax25->ack_queue);
+	skb_queue_head_init(&ax25->reseq_queue);
+
+	init_timer(&ax25->timer);
+	init_timer(&ax25->t1timer);
+	init_timer(&ax25->t2timer);
+	init_timer(&ax25->t3timer);
+	init_timer(&ax25->idletimer);
+
+	ax25_fillin_cb(ax25, NULL);
+
+	ax25->state = AX25_STATE_0;
+
+	return ax25;
+}
+
+/*
+ *	Handling for system calls applied via the various interfaces to an
+ *	AX25 socket object
+ */
+
+static int ax25_setsockopt(struct socket *sock, int level, int optname,
+	char __user *optval, int optlen)
+{
+	struct sock *sk = sock->sk;
+	ax25_cb *ax25;
+	struct net_device *dev;
+	char devname[IFNAMSIZ];
+	int opt, res = 0;
+
+	if (level != SOL_AX25)
+		return -ENOPROTOOPT;
+
+	if (optlen < sizeof(int))
+		return -EINVAL;
+
+	if (get_user(opt, (int __user *)optval))
+		return -EFAULT;
+
+	lock_sock(sk);
+	ax25 = ax25_sk(sk);
+
+	switch (optname) {
+	case AX25_WINDOW:
+		if (ax25->modulus == AX25_MODULUS) {
+			if (opt < 1 || opt > 7) {
+				res = -EINVAL;
+				break;
+			}
+		} else {
+			if (opt < 1 || opt > 63) {
+				res = -EINVAL;
+				break;
+			}
+		}
+		ax25->window = opt;
+		break;
+
+	case AX25_T1:
+		if (opt < 1) {
+			res = -EINVAL;
+			break;
+		}
+		ax25->rtt = (opt * HZ) / 2;
+		ax25->t1  = opt * HZ;
+		break;
+
+	case AX25_T2:
+		if (opt < 1) {
+			res = -EINVAL;
+			break;
+		}
+		ax25->t2 = opt * HZ;
+		break;
+
+	case AX25_N2:
+		if (opt < 1 || opt > 31) {
+			res = -EINVAL;
+			break;
+		}
+		ax25->n2 = opt;
+		break;
+
+	case AX25_T3:
+		if (opt < 1) {
+			res = -EINVAL;
+			break;
+		}
+		ax25->t3 = opt * HZ;
+		break;
+
+	case AX25_IDLE:
+		if (opt < 0) {
+			res = -EINVAL;
+			break;
+		}
+		ax25->idle = opt * 60 * HZ;
+		break;
+
+	case AX25_BACKOFF:
+		if (opt < 0 || opt > 2) {
+			res = -EINVAL;
+			break;
+		}
+		ax25->backoff = opt;
+		break;
+
+	case AX25_EXTSEQ:
+		ax25->modulus = opt ? AX25_EMODULUS : AX25_MODULUS;
+		break;
+
+	case AX25_PIDINCL:
+		ax25->pidincl = opt ? 1 : 0;
+		break;
+
+	case AX25_IAMDIGI:
+		ax25->iamdigi = opt ? 1 : 0;
+		break;
+
+	case AX25_PACLEN:
+		if (opt < 16 || opt > 65535) {
+			res = -EINVAL;
+			break;
+		}
+		ax25->paclen = opt;
+		break;
+
+	case SO_BINDTODEVICE:
+		if (optlen > IFNAMSIZ)
+			optlen=IFNAMSIZ;
+		if (copy_from_user(devname, optval, optlen)) {
+		res = -EFAULT;
+			break;
+		}
+
+		dev = dev_get_by_name(devname);
+		if (dev == NULL) {
+			res = -ENODEV;
+			break;
+		}
+
+		if (sk->sk_type == SOCK_SEQPACKET &&
+		   (sock->state != SS_UNCONNECTED ||
+		    sk->sk_state == TCP_LISTEN)) {
+			res = -EADDRNOTAVAIL;
+			dev_put(dev);
+			break;
+		}
+
+		ax25->ax25_dev = ax25_dev_ax25dev(dev);
+		ax25_fillin_cb(ax25, ax25->ax25_dev);
+		break;
+
+	default:
+		res = -ENOPROTOOPT;
+	}
+	release_sock(sk);
+
+	return res;
+}
+
+static int ax25_getsockopt(struct socket *sock, int level, int optname,
+	char __user *optval, int __user *optlen)
+{
+	struct sock *sk = sock->sk;
+	ax25_cb *ax25;
+	struct ax25_dev *ax25_dev;
+	char devname[IFNAMSIZ];
+	void *valptr;
+	int val = 0;
+	int maxlen, length;
+
+	if (level != SOL_AX25)
+		return -ENOPROTOOPT;
+
+	if (get_user(maxlen, optlen))
+		return -EFAULT;
+
+	if (maxlen < 1)
+		return -EFAULT;
+
+	valptr = (void *) &val;
+	length = min_t(unsigned int, maxlen, sizeof(int));
+
+	lock_sock(sk);
+	ax25 = ax25_sk(sk);
+
+	switch (optname) {
+	case AX25_WINDOW:
+		val = ax25->window;
+		break;
+
+	case AX25_T1:
+		val = ax25->t1 / HZ;
+		break;
+
+	case AX25_T2:
+		val = ax25->t2 / HZ;
+		break;
+
+	case AX25_N2:
+		val = ax25->n2;
+		break;
+
+	case AX25_T3:
+		val = ax25->t3 / HZ;
+		break;
+
+	case AX25_IDLE:
+		val = ax25->idle / (60 * HZ);
+		break;
+
+	case AX25_BACKOFF:
+		val = ax25->backoff;
+		break;
+
+	case AX25_EXTSEQ:
+		val = (ax25->modulus == AX25_EMODULUS);
+		break;
+
+	case AX25_PIDINCL:
+		val = ax25->pidincl;
+		break;
+
+	case AX25_IAMDIGI:
+		val = ax25->iamdigi;
+		break;
+
+	case AX25_PACLEN:
+		val = ax25->paclen;
+		break;
+
+	case SO_BINDTODEVICE:
+		ax25_dev = ax25->ax25_dev;
+
+		if (ax25_dev != NULL && ax25_dev->dev != NULL) {
+			strlcpy(devname, ax25_dev->dev->name, sizeof(devname));
+			length = strlen(devname) + 1;
+		} else {
+			*devname = '\0';
+			length = 1;
+		}
+
+		valptr = (void *) devname;
+		break;
+
+	default:
+		release_sock(sk);
+		return -ENOPROTOOPT;
+	}
+	release_sock(sk);
+
+	if (put_user(length, optlen))
+		return -EFAULT;
+
+	return copy_to_user(optval, valptr, length) ? -EFAULT : 0;
+}
+
+static int ax25_listen(struct socket *sock, int backlog)
+{
+	struct sock *sk = sock->sk;
+	int res = 0;
+
+	lock_sock(sk);
+	if (sk->sk_type == SOCK_SEQPACKET && sk->sk_state != TCP_LISTEN) {
+		sk->sk_max_ack_backlog = backlog;
+		sk->sk_state           = TCP_LISTEN;
+		goto out;
+	}
+	res = -EOPNOTSUPP;
+
+out:
+	release_sock(sk);
+
+	return res;
+}
+
+/*
+ * XXX: when creating ax25_sock we should update the .obj_size setting
+ * below.
+ */
+static struct proto ax25_proto = {
+	.name	  = "AX25",
+	.owner	  = THIS_MODULE,
+	.obj_size = sizeof(struct sock),
+};
+
+static int ax25_create(struct socket *sock, int protocol)
+{
+	struct sock *sk;
+	ax25_cb *ax25;
+
+	switch (sock->type) {
+	case SOCK_DGRAM:
+		if (protocol == 0 || protocol == PF_AX25)
+			protocol = AX25_P_TEXT;
+		break;
+
+	case SOCK_SEQPACKET:
+		switch (protocol) {
+		case 0:
+		case PF_AX25:	/* For CLX */
+			protocol = AX25_P_TEXT;
+			break;
+		case AX25_P_SEGMENT:
+#ifdef CONFIG_INET
+		case AX25_P_ARP:
+		case AX25_P_IP:
+#endif
+#ifdef CONFIG_NETROM
+		case AX25_P_NETROM:
+#endif
+#ifdef CONFIG_ROSE
+		case AX25_P_ROSE:
+#endif
+			return -ESOCKTNOSUPPORT;
+#ifdef CONFIG_NETROM_MODULE
+		case AX25_P_NETROM:
+			if (ax25_protocol_is_registered(AX25_P_NETROM))
+				return -ESOCKTNOSUPPORT;
+#endif
+#ifdef CONFIG_ROSE_MODULE
+		case AX25_P_ROSE:
+			if (ax25_protocol_is_registered(AX25_P_ROSE))
+				return -ESOCKTNOSUPPORT;
+#endif
+		default:
+			break;
+		}
+		break;
+
+	case SOCK_RAW:
+		break;
+	default:
+		return -ESOCKTNOSUPPORT;
+	}
+
+	if ((sk = sk_alloc(PF_AX25, GFP_ATOMIC, &ax25_proto, 1)) == NULL)
+		return -ENOMEM;
+
+	ax25 = sk->sk_protinfo = ax25_create_cb();
+	if (!ax25) {
+		sk_free(sk);
+		return -ENOMEM;
+	}
+
+	sock_init_data(sock, sk);
+
+	sk->sk_destruct = ax25_free_sock;
+	sock->ops    = &ax25_proto_ops;
+	sk->sk_protocol = protocol;
+
+	ax25->sk    = sk;
+
+	return 0;
+}
+
+struct sock *ax25_make_new(struct sock *osk, struct ax25_dev *ax25_dev)
+{
+	struct sock *sk;
+	ax25_cb *ax25, *oax25;
+
+	if ((sk = sk_alloc(PF_AX25, GFP_ATOMIC, osk->sk_prot, 1)) == NULL)
+		return NULL;
+
+	if ((ax25 = ax25_create_cb()) == NULL) {
+		sk_free(sk);
+		return NULL;
+	}
+
+	switch (osk->sk_type) {
+	case SOCK_DGRAM:
+		break;
+	case SOCK_SEQPACKET:
+		break;
+	default:
+		sk_free(sk);
+		ax25_cb_put(ax25);
+		return NULL;
+	}
+
+	sock_init_data(NULL, sk);
+
+	sk->sk_destruct = ax25_free_sock;
+	sk->sk_type     = osk->sk_type;
+	sk->sk_socket   = osk->sk_socket;
+	sk->sk_priority = osk->sk_priority;
+	sk->sk_protocol = osk->sk_protocol;
+	sk->sk_rcvbuf   = osk->sk_rcvbuf;
+	sk->sk_sndbuf   = osk->sk_sndbuf;
+	sk->sk_state    = TCP_ESTABLISHED;
+	sk->sk_sleep    = osk->sk_sleep;
+
+	if (sock_flag(osk, SOCK_DBG))
+		sock_set_flag(sk, SOCK_DBG);
+
+	if (sock_flag(osk, SOCK_ZAPPED))
+		sock_set_flag(sk, SOCK_ZAPPED);
+
+	oax25 = ax25_sk(osk);
+
+	ax25->modulus = oax