Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6: (1429 commits)
  net: Allow dependancies of FDDI & Tokenring to be modular.
  igb: Fix build warning when DCA is disabled.
  net: Fix warning fallout from recent NAPI interface changes.
  gro: Fix potential use after free
  sfc: If AN is enabled, always read speed/duplex from the AN advertising bits
  sfc: When disabling the NIC, close the device rather than unregistering it
  sfc: SFT9001: Add cable diagnostics
  sfc: Add support for multiple PHY self-tests
  sfc: Merge top-level functions for self-tests
  sfc: Clean up PHY mode management in loopback self-test
  sfc: Fix unreliable link detection in some loopback modes
  sfc: Generate unique names for per-NIC workqueues
  802.3ad: use standard ethhdr instead of ad_header
  802.3ad: generalize out mac address initializer
  802.3ad: initialize ports LACPDU from const initializer
  802.3ad: remove typedef around ad_system
  802.3ad: turn ports is_individual into a bool
  802.3ad: turn ports is_enabled into a bool
  802.3ad: make ntt bool
  ixgbe: Fix set_ringparam in ixgbe to use the same memory pools.
  ...

Fixed trivial IPv4/6 address printing conflicts in fs/cifs/connect.c due
to the conversion to %pI (in this networking merge) and the addition of
doing IPv6 addresses (from the earlier merge of CIFS).

2 files changed, 45 insertions, 54 deletions

diff --git a/net/ax25/ax25_in.c b/net/ax25/ax25_in.c
index 4a5ba978a80..5f1d2107a1d 100644
--- a/net/ax25/ax25_in.c
+++ b/net/ax25/ax25_in.c
@@ -200,19 +200,15 @@ static int ax25_rcv(struct sk_buff *skb, struct net_device *dev,
 
 	skb_reset_transport_header(skb);
 
-	if ((ax25_dev = ax25_dev_ax25dev(dev)) == NULL) {
-		kfree_skb(skb);
-		return 0;
-	}
+	if ((ax25_dev = ax25_dev_ax25dev(dev)) == NULL)
+		goto free;
 
 	/*
 	 *	Parse the address header.
 	 */
 
-	if (ax25_addr_parse(skb->data, skb->len, &src, &dest, &dp, &type, &dama) == NULL) {
-		kfree_skb(skb);
-		return 0;
-	}
+	if (ax25_addr_parse(skb->data, skb->len, &src, &dest, &dp, &type, &dama) == NULL)
+		goto free;
 
 	/*
 	 *	Ours perhaps ?
@@ -239,10 +235,8 @@ static int ax25_rcv(struct sk_buff *skb, struct net_device *dev,
 
 		ax25_send_to_raw(&dest, skb, skb->data[1]);
 
-		if (!mine && ax25cmp(&dest, (ax25_address *)dev->broadcast) != 0) {
-			kfree_skb(skb);
-			return 0;
-		}
+		if (!mine && ax25cmp(&dest, (ax25_address *)dev->broadcast) != 0)
+			goto free;
 
 		/* Now we are pointing at the pid byte */
 		switch (skb->data[1]) {
@@ -301,10 +295,8 @@ static int ax25_rcv(struct sk_buff *skb, struct net_device *dev,
 	 *	If not, should we DM the incoming frame (except DMs) or
 	 *	silently ignore them. For now we stay quiet.
 	 */
-	if (ax25_dev->values[AX25_VALUES_CONMODE] == 0) {
-		kfree_skb(skb);
-		return 0;
-	}
+	if (ax25_dev->values[AX25_VALUES_CONMODE] == 0)
+		goto free;
 
 	/* LAPB */
 
@@ -339,8 +331,7 @@ static int ax25_rcv(struct sk_buff *skb, struct net_device *dev,
 		if ((*skb->data & ~AX25_PF) != AX25_DM && mine)
 			ax25_return_dm(dev, &src, &dest, &dp);
 
-		kfree_skb(skb);
-		return 0;
+		goto free;
 	}
 
 	/* b) received SABM(E) */
@@ -372,15 +363,12 @@ static int ax25_rcv(struct sk_buff *skb, struct net_device *dev,
 		sk->sk_ack_backlog++;
 		bh_unlock_sock(sk);
 	} else {
-		if (!mine) {
-			kfree_skb(skb);
-			return 0;
-		}
+		if (!mine)
+			goto free;
 
 		if ((ax25 = ax25_create_cb()) == NULL) {
 			ax25_return_dm(dev, &src, &dest, &dp);
-			kfree_skb(skb);
-			return 0;
+			goto free;
 		}
 
 		ax25_fillin_cb(ax25, ax25_dev);
@@ -436,9 +424,10 @@ static int ax25_rcv(struct sk_buff *skb, struct net_device *dev,
 		if (!sock_flag(sk, SOCK_DEAD))
 			sk->sk_data_ready(sk, skb->len);
 		sock_put(sk);
-	} else
+	} else {
+free:
 		kfree_skb(skb);
-
+	}
 	return 0;
 }
 
diff --git a/net/ax25/sysctl_net_ax25.c b/net/ax25/sysctl_net_ax25.c
index f288fc4aef9..62ee3fb3473 100644
--- a/net/ax25/sysctl_net_ax25.c
+++ b/net/ax25/sysctl_net_ax25.c
@@ -24,7 +24,9 @@ static int min_idle[1],			max_idle[] = {65535000};
 static int min_n2[] = {1},		max_n2[] = {31};
 static int min_paclen[] = {1},		max_paclen[] = {512};
 static int min_proto[1],		max_proto[] = { AX25_PROTO_MAX };
+#ifdef CONFIG_AX25_DAMA_SLAVE
 static int min_ds_timeout[1],		max_ds_timeout[] = {65535000};
+#endif
 
 static struct ctl_table_header *ax25_table_header;
 
@@ -43,8 +45,8 @@ static const ctl_table ax25_param_table[] = {
 		.procname	= "ip_default_mode",
 		.maxlen		= sizeof(int),
 		.mode		= 0644,
-		.proc_handler	= &proc_dointvec_minmax,
-		.strategy	= &sysctl_intvec,
+		.proc_handler	= proc_dointvec_minmax,
+		.strategy	= sysctl_intvec,
 		.extra1		= &min_ipdefmode,
 		.extra2		= &max_ipdefmode
 	},
@@ -53,8 +55,8 @@ static const ctl_table ax25_param_table[] = {
 		.procname	= "ax25_default_mode",
 		.maxlen		= sizeof(int),
 		.mode		= 0644,
-		.proc_handler	= &proc_dointvec_minmax,
-		.strategy	= &sysctl_intvec,
+		.proc_handler	= proc_dointvec_minmax,
+		.strategy	= sysctl_intvec,
 		.extra1		= &min_axdefmode,
 		.extra2		= &max_axdefmode
 	},
@@ -63,8 +65,8 @@ static const ctl_table ax25_param_table[] = {
 		.procname	= "backoff_type",
 		.maxlen		= sizeof(int),
 		.mode		= 0644,
-		.proc_handler	= &proc_dointvec_minmax,
-		.strategy	= &sysctl_intvec,
+		.proc_handler	= proc_dointvec_minmax,
+		.strategy	= sysctl_intvec,
 		.extra1		= &min_backoff,
 		.extra2		= &max_backoff
 	},
@@ -73,8 +75,8 @@ static const ctl_table ax25_param_table[] = {
 		.procname	= "connect_mode",
 		.maxlen		= sizeof(int),
 		.mode		= 0644,
-		.proc_handler	= &proc_dointvec_minmax,
-		.strategy	= &sysctl_intvec,
+		.proc_handler	= proc_dointvec_minmax,
+		.strategy	= sysctl_intvec,
 		.extra1		= &min_conmode,
 		.extra2		= &max_conmode
 	},
@@ -83,8 +85,8 @@ static const ctl_table ax25_param_table[] = {
 		.procname	= "standard_window_size",
 		.maxlen		= sizeof(int),
 		.mode		= 0644,
-		.proc_handler	= &proc_dointvec_minmax,
-		.strategy	= &sysctl_intvec,
+		.proc_handler	= proc_dointvec_minmax,
+		.strategy	= sysctl_intvec,
 		.extra1		= &min_window,
 		.extra2		= &max_window
 	},
@@ -93,8 +95,8 @@ static const ctl_table ax25_param_table[] = {
 		.procname	= "extended_window_size",
 		.maxlen		= sizeof(int),
 		.mode		= 0644,
-		.proc_handler	= &proc_dointvec_minmax,
-		.strategy	= &sysctl_intvec,
+		.proc_handler	= proc_dointvec_minmax,
+		.strategy	= sysctl_intvec,
 		.extra1		= &min_ewindow,
 		.extra2		= &max_ewindow
 	},
@@ -103,8 +105,8 @@ static const ctl_table ax25_param_table[] = {
 		.procname	= "t1_timeout",
 		.maxlen		= sizeof(int),
 		.mode		= 0644,
-		.proc_handler	= &proc_dointvec_minmax,
-		.strategy	= &sysctl_intvec,
+		.proc_handler	= proc_dointvec_minmax,
+		.strategy	= sysctl_intvec,
 		.extra1		= &min_t1,
 		.extra2		= &max_t1
 	},
@@ -113,8 +115,8 @@ static const ctl_table ax25_param_table[] = {
 		.procname	= "t2_timeout",
 		.maxlen		= sizeof(int),
 		.mode		= 0644,
-		.proc_handler	= &proc_dointvec_minmax,
-		.strategy	= &sysctl_intvec,
+		.proc_handler	= proc_dointvec_minmax,
+		.strategy	= sysctl_intvec,
 		.extra1		= &min_t2,
 		.extra2		= &max_t2
 	},
@@ -123,8 +125,8 @@ static const ctl_table ax25_param_table[] = {
 		.procname	= "t3_timeout",
 		.maxlen		= sizeof(int),
 		.mode		= 0644,
-		.proc_handler	= &proc_dointvec_minmax,
-		.strategy	= &sysctl_intvec,
+		.proc_handler	= proc_dointvec_minmax,
+		.strategy	= sysctl_intvec,
 		.extra1		= &min_t3,
 		.extra2		= &max_t3
 	},
@@ -133,8 +135,8 @@ static const ctl_table ax25_param_table[] = {
 		.procname	= "idle_timeout",
 		.maxlen		= sizeof(int),
 		.mode		= 0644,
-		.proc_handler	= &proc_dointvec_minmax,
-		.strategy	= &sysctl_intvec,
+		.proc_handler	= proc_dointvec_minmax,
+		.strategy	= sysctl_intvec,
 		.extra1		= &min_idle,
 		.extra2		= &max_idle
 	},
@@ -143,8 +145,8 @@ static const ctl_table ax25_param_table[] = {
 		.procname	= "maximum_retry_count",
 		.maxlen		= sizeof(int),
 		.mode		= 0644,
-		.proc_handler	= &proc_dointvec_minmax,
-		.strategy	= &sysctl_intvec,
+		.proc_handler	= proc_dointvec_minmax,
+		.strategy	= sysctl_intvec,
 		.extra1		= &min_n2,
 		.extra2		= &max_n2
 	},
@@ -153,8 +155,8 @@ static const ctl_table ax25_param_table[] = {
 		.procname	= "maximum_packet_length",
 		.maxlen		= sizeof(int),
 		.mode		= 0644,
-		.proc_handler	= &proc_dointvec_minmax,
-		.strategy	= &sysctl_intvec,
+		.proc_handler	= proc_dointvec_minmax,
+		.strategy	= sysctl_intvec,
 		.extra1		= &min_paclen,
 		.extra2		= &max_paclen
 	},
@@ -163,8 +165,8 @@ static const ctl_table ax25_param_table[] = {
 		.procname	= "protocol",
 		.maxlen		= sizeof(int),
 		.mode		= 0644,
-		.proc_handler	= &proc_dointvec_minmax,
-		.strategy	= &sysctl_intvec,
+		.proc_handler	= proc_dointvec_minmax,
+		.strategy	= sysctl_intvec,
 		.extra1		= &min_proto,
 		.extra2		= &max_proto
 	},
@@ -174,8 +176,8 @@ static const ctl_table ax25_param_table[] = {
 		.procname	= "dama_slave_timeout",
 		.maxlen		= sizeof(int),
 		.mode		= 0644,
-		.proc_handler	= &proc_dointvec_minmax,
-		.strategy	= &sysctl_intvec,
+		.proc_handler	= proc_dointvec_minmax,
+		.strategy	= sysctl_intvec,
 		.extra1		= &min_ds_timeout,
 		.extra2		= &max_ds_timeout
 	},