Merge branch 'linus' into oprofile-v2

Conflicts:
	arch/x86/kernel/apic_32.c
	arch/x86/oprofile/nmi_int.c
	include/linux/pci_ids.h

5 files changed, 33 insertions, 49 deletions

diff --git a/init/Kconfig b/init/Kconfig
index a50bdfed2df..c11da38837e 100644
--- a/init/Kconfig
+++ b/init/Kconfig
@@ -171,7 +171,7 @@ config BSD_PROCESS_ACCT_V3
 	  process and it's parent. Note that this file format is incompatible
 	  with previous v0/v1/v2 file formats, so you will need updated tools
 	  for processing it. A preliminary version of these tools is available
-	  at <http://www.physik3.uni-rostock.de/tim/kernel/utils/acct/>.
+	  at <http://www.gnu.org/software/acct/>.
 
 config TASKSTATS
 	bool "Export task/process statistics through netlink (EXPERIMENTAL)"
@@ -486,7 +486,7 @@ config PID_NS
 	default n
 	depends on NAMESPACES && EXPERIMENTAL
 	help
-	  Suport process id namespaces.  This allows having multiple
+	  Support process id namespaces.  This allows having multiple
 	  process with the same pid as long as they are in different
 	  pid namespaces.  This is a building block of containers.
 
@@ -522,7 +522,7 @@ config CC_OPTIMIZE_FOR_SIZE
 	  Enabling this option will pass "-Os" instead of "-O2" to gcc
 	  resulting in a smaller kernel.
 
-	  If unsure, say N.
+	  If unsure, say Y.
 
 config SYSCTL
 	bool
@@ -558,17 +558,6 @@ config SYSCTL_SYSCALL
 
 	  If unsure say Y here.
 
-config SYSCTL_SYSCALL_CHECK
-	bool "Sysctl checks" if EMBEDDED
-	depends on SYSCTL_SYSCALL
-	default y
-	---help---
-	  sys_sysctl uses binary paths that have been found challenging
-	  to properly maintain and use. This enables checks that help
-	  you to keep things correct.
-
-	  If unsure say Y here.
-
 config KALLSYMS
 	 bool "Load all symbols for debugging/ksymoops" if EMBEDDED
 	 default y
@@ -802,6 +791,10 @@ config PROC_PAGE_MONITOR
 
 endmenu		# General setup
 
+config HAVE_GENERIC_DMA_COHERENT
+	bool
+	default n
+
 config SLABINFO
 	bool
 	depends on PROC_FS
@@ -841,9 +834,10 @@ menuconfig MODULES
 
 	  If unsure, say Y.
 
+if MODULES
+
 config MODULE_FORCE_LOAD
 	bool "Forced module loading"
-	depends on MODULES
 	default n
 	help
 	  Allow loading of modules without version information (ie. modprobe
@@ -852,7 +846,6 @@ config MODULE_FORCE_LOAD
 
 config MODULE_UNLOAD
 	bool "Module unloading"
-	depends on MODULES
 	help
 	  Without this option you will not be able to unload any
 	  modules (note that some modules may not be unloadable
@@ -871,7 +864,6 @@ config MODULE_FORCE_UNLOAD
 
 config MODVERSIONS
 	bool "Module versioning support"
-	depends on MODULES
 	help
 	  Usually, you have to use modules compiled with your kernel.
 	  Saying Y here makes it sometimes possible to use modules
@@ -882,7 +874,6 @@ config MODVERSIONS
 
 config MODULE_SRCVERSION_ALL
 	bool "Source checksum for all modules"
-	depends on MODULES
 	help
 	  Modules which contain a MODULE_VERSION get an extra "srcversion"
 	  field inserted into their modinfo section, which contains a
@@ -894,11 +885,12 @@ config MODULE_SRCVERSION_ALL
 
 config KMOD
 	def_bool y
-	depends on MODULES
 	help
 	  This is being removed soon.  These days, CONFIG_MODULES
 	  implies CONFIG_KMOD, so use that instead.
 
+endif # MODULES
+
 config STOP_MACHINE
 	bool
 	default y
diff --git a/init/calibrate.c b/init/calibrate.c
index 7963e3fc51d..a379c906119 100644
--- a/init/calibrate.c
+++ b/init/calibrate.c
@@ -170,7 +170,7 @@ void __cpuinit calibrate_delay(void)
 				loops_per_jiffy &= ~loopbit;
 		}
 	}
-	printk(KERN_INFO "%lu.%02lu BogoMIPS (lpj=%lu)\n",
+	printk(KERN_CONT "%lu.%02lu BogoMIPS (lpj=%lu)\n",
 			loops_per_jiffy/(500000/HZ),
 			(loops_per_jiffy/(5000/HZ)) % 100, loops_per_jiffy);
 }
diff --git a/init/do_mounts.c b/init/do_mounts.c
index f769fac4f4c..d055b1914c3 100644
--- a/init/do_mounts.c
+++ b/init/do_mounts.c
@@ -23,7 +23,7 @@
 int __initdata rd_doload;	/* 1 = load RAM disk, 0 = don't load */
 
 int root_mountflags = MS_RDONLY | MS_SILENT;
-char * __initdata root_device_name;
+static char * __initdata root_device_name;
 static char __initdata saved_root_name[64];
 static int __initdata root_wait;
 
@@ -263,6 +263,10 @@ retry:
 		printk("Please append a correct \"root=\" boot option; here are the available partitions:\n");
 
 		printk_all_partitions();
+#ifdef CONFIG_DEBUG_BLOCK_EXT_DEVT
+		printk("DEBUG_BLOCK_EXT_DEVT is enabled, you need to specify "
+		       "explicit textual name for \"root=\" boot option.\n");
+#endif
 		panic("VFS: Unable to mount root fs on %s", b);
 	}
 
diff --git a/init/do_mounts.h b/init/do_mounts.h
index 735705d137f..9aa968d5432 100644
--- a/init/do_mounts.h
+++ b/init/do_mounts.h
@@ -11,7 +11,6 @@ void  change_floppy(char *fmt, ...);
 void  mount_block_root(char *name, int flags);
 void  mount_root(void);
 extern int root_mountflags;
-extern char *root_device_name;
 
 static inline int create_dev(char *name, dev_t dev)
 {
diff --git a/init/main.c b/init/main.c
index 0604cbcaf1e..3820323c4c8 100644
--- a/init/main.c
+++ b/init/main.c
@@ -22,7 +22,6 @@
 #include <linux/init.h>
 #include <linux/smp_lock.h>
 #include <linux/initrd.h>
-#include <linux/hdreg.h>
 #include <linux/bootmem.h>
 #include <linux/tty.h>
 #include <linux/gfp.h>
@@ -635,10 +634,11 @@ asmlinkage void __init start_kernel(void)
 
 #ifdef CONFIG_BLK_DEV_INITRD
 	if (initrd_start && !initrd_below_start_ok &&
-	    page_to_pfn(virt_to_page(initrd_start)) < min_low_pfn) {
+	    page_to_pfn(virt_to_page((void *)initrd_start)) < min_low_pfn) {
 		printk(KERN_CRIT "initrd overwritten (0x%08lx < 0x%08lx) - "
 		    "disabling it.\n",
-		    page_to_pfn(virt_to_page(initrd_start)), min_low_pfn);
+		    page_to_pfn(virt_to_page((void *)initrd_start)),
+		    min_low_pfn);
 		initrd_start = 0;
 	}
 #endif
@@ -691,7 +691,7 @@ asmlinkage void __init start_kernel(void)
 	rest_init();
 }
 
-static int __initdata initcall_debug;
+static int initcall_debug;
 
 static int __init initcall_debug_setup(char *str)
 {
@@ -700,7 +700,7 @@ static int __init initcall_debug_setup(char *str)
 }
 __setup("initcall_debug", initcall_debug_setup);
 
-static void __init do_one_initcall(initcall_t fn)
+int do_one_initcall(initcall_t fn)
 {
 	int count = preempt_count();
 	ktime_t t0, t1, delta;
@@ -708,7 +708,7 @@ static void __init do_one_initcall(initcall_t fn)
 	int result;
 
 	if (initcall_debug) {
-		print_fn_descriptor_symbol("calling  %s\n", fn);
+		printk("calling  %pF\n", fn);
 		t0 = ktime_get();
 	}
 
@@ -718,8 +718,8 @@ static void __init do_one_initcall(initcall_t fn)
 		t1 = ktime_get();
 		delta = ktime_sub(t1, t0);
 
-		print_fn_descriptor_symbol("initcall %s", fn);
-		printk(" returned %d after %Ld msecs\n", result,
+		printk("initcall %pF returned %d after %Ld msecs\n",
+			fn, result,
 			(unsigned long long) delta.tv64 >> 20);
 	}
 
@@ -737,19 +737,20 @@ static void __init do_one_initcall(initcall_t fn)
 		local_irq_enable();
 	}
 	if (msgbuf[0]) {
-		print_fn_descriptor_symbol(KERN_WARNING "initcall %s", fn);
-		printk(" returned with %s\n", msgbuf);
+		printk("initcall %pF returned with %s\n", fn, msgbuf);
 	}
+
+	return result;
 }
 
 
-extern initcall_t __initcall_start[], __initcall_end[];
+extern initcall_t __initcall_start[], __initcall_end[], __early_initcall_end[];
 
 static void __init do_initcalls(void)
 {
 	initcall_t *call;
 
-	for (call = __initcall_start; call < __initcall_end; call++)
+	for (call = __early_initcall_end; call < __initcall_end; call++)
 		do_one_initcall(*call);
 
 	/* Make sure there is no pending stuff from the initcall sequence */
@@ -774,24 +775,12 @@ static void __init do_basic_setup(void)
 	do_initcalls();
 }
 
-static int __initdata nosoftlockup;
-
-static int __init nosoftlockup_setup(char *str)
-{
-	nosoftlockup = 1;
-	return 1;
-}
-__setup("nosoftlockup", nosoftlockup_setup);
-
 static void __init do_pre_smp_initcalls(void)
 {
-	extern int spawn_ksoftirqd(void);
+	initcall_t *call;
 
-	init_call_single_data();
-	migration_init();
-	spawn_ksoftirqd();
-	if (!nosoftlockup)
-		spawn_softlockup_task();
+	for (call = __initcall_start; call < __early_initcall_end; call++)
+		do_one_initcall(*call);
 }
 
 static void run_init_process(char *init_filename)