Merge tag 'for-3.7-rc1' of git://gitorious.org/linux-pwm/linux-pwm

Pull pwm changes from Thierry Reding:
 "All legacy PWM providers have now been moved to the PWM subsystem.
  The plan for 3.8 is to adapt all board files to provide a lookup table
  for PWM devices in order to get rid of the global namespace.
  Subsequently, users of the legacy pwm_request() and pwm_free()
  functions can be migrated to the new pwm_get() and pwm_put()
  functions.  Once this has been completed, the legacy API and the
  compatibility code in the core can be removed.

  In addition to the above, these changes also add support for
  configuring the polarity of a PWM signal (currently only supported on
  ECAP and EHRPWM) and include a much needed rework of the i.MX driver.
  Managed functions to obtain and release a PWM device (devm_pwm_get()
  and devm_pwm_put()) have been added and the pwm-backlight driver has
  been updated to use them.  If the PWM subsystem hasn't been enabled,
  dummy functions are provided that allow the subsystem to safely
  compile out.

  Some common checks on input parameters have been moved to the core and
  removed from the drivers.  Finally, a small fix corrects the
  description of the PWM specifier's second cell in the device tree
  representation."

* tag 'for-3.7-rc1' of git://gitorious.org/linux-pwm/linux-pwm: (23 commits)
  pwm: dt: Fix description of second PWM cell
  pwm: Check for negative duty-cycle and period
  pwm: Add Ingenic JZ4740 support
  MIPS: JZ4740: Export timer API
  pwm: Move PUV3 PWM driver to PWM framework
  unicore32: pwm: Use managed resource allocations
  unicore32: pwm: Remove unnecessary indirection
  unicore32: pwm: Use module_platform_driver()
  unicore32: pwm: Properly remap memory-mapped registers
  pwm-backlight: Use devm_pwm_get() instead of pwm_get()
  pwm: Move AB8500 PWM driver to PWM framework
  pwm: Fix compilation error when CONFIG_PWM is not defined
  pwm: i.MX: fix clock lookup
  pwm: i.MX: use per clock unconditionally
  pwm: i.MX: add devicetree support
  pwm: i.MX: Use module_platform_driver
  pwm: i.MX: add functions to enable/disable pwm.
  pwm: i.MX: remove unnecessary if in pwm_[en|dis]able
  pwm: i.MX: factor out SoC specific functions
  pwm: pwm-tiehrpwm: Add support for configuring polarity of PWM
  ...

1 files changed, 106 insertions, 2 deletions

diff --git a/include/linux/pwm.h b/include/linux/pwm.h
index 21d076c5089..112b3143684 100644
--- a/include/linux/pwm.h
+++ b/include/linux/pwm.h
@@ -1,11 +1,13 @@
 #ifndef __LINUX_PWM_H
 #define __LINUX_PWM_H
 
+#include <linux/err.h>
 #include <linux/of.h>
 
 struct pwm_device;
 struct seq_file;
 
+#if IS_ENABLED(CONFIG_PWM) || IS_ENABLED(CONFIG_HAVE_PWM)
 /*
  * pwm_request - request a PWM device
  */
@@ -30,10 +32,47 @@ int pwm_enable(struct pwm_device *pwm);
  * pwm_disable - stop a PWM output toggling
  */
 void pwm_disable(struct pwm_device *pwm);
+#else
+static inline struct pwm_device *pwm_request(int pwm_id, const char *label)
+{
+	return ERR_PTR(-ENODEV);
+}
+
+static inline void pwm_free(struct pwm_device *pwm)
+{
+}
+
+static inline int pwm_config(struct pwm_device *pwm, int duty_ns, int period_ns)
+{
+	return -EINVAL;
+}
+
+static inline int pwm_enable(struct pwm_device *pwm)
+{
+	return -EINVAL;
+}
+
+static inline void pwm_disable(struct pwm_device *pwm)
+{
+}
+#endif
 
-#ifdef CONFIG_PWM
 struct pwm_chip;
 
+/**
+ * enum pwm_polarity - polarity of a PWM signal
+ * @PWM_POLARITY_NORMAL: a high signal for the duration of the duty-
+ * cycle, followed by a low signal for the remainder of the pulse
+ * period
+ * @PWM_POLARITY_INVERSED: a low signal for the duration of the duty-
+ * cycle, followed by a high signal for the remainder of the pulse
+ * period
+ */
+enum pwm_polarity {
+	PWM_POLARITY_NORMAL,
+	PWM_POLARITY_INVERSED,
+};
+
 enum {
 	PWMF_REQUESTED = 1 << 0,
 	PWMF_ENABLED = 1 << 1,
@@ -61,11 +100,17 @@ static inline unsigned int pwm_get_period(struct pwm_device *pwm)
 	return pwm ? pwm->period : 0;
 }
 
+/*
+ * pwm_set_polarity - configure the polarity of a PWM signal
+ */
+int pwm_set_polarity(struct pwm_device *pwm, enum pwm_polarity polarity);
+
 /**
  * struct pwm_ops - PWM controller operations
  * @request: optional hook for requesting a PWM
  * @free: optional hook for freeing a PWM
  * @config: configure duty cycles and period length for this PWM
+ * @set_polarity: configure the polarity of this PWM
  * @enable: enable PWM output toggling
  * @disable: disable PWM output toggling
  * @dbg_show: optional routine to show contents in debugfs
@@ -79,6 +124,9 @@ struct pwm_ops {
 	int			(*config)(struct pwm_chip *chip,
 					  struct pwm_device *pwm,
 					  int duty_ns, int period_ns);
+	int			(*set_polarity)(struct pwm_chip *chip,
+					  struct pwm_device *pwm,
+					  enum pwm_polarity polarity);
 	int			(*enable)(struct pwm_chip *chip,
 					  struct pwm_device *pwm);
 	void			(*disable)(struct pwm_chip *chip,
@@ -113,6 +161,7 @@ struct pwm_chip {
 	unsigned int		of_pwm_n_cells;
 };
 
+#if IS_ENABLED(CONFIG_PWM)
 int pwm_set_chip_data(struct pwm_device *pwm, void *data);
 void *pwm_get_chip_data(struct pwm_device *pwm);
 
@@ -125,6 +174,57 @@ struct pwm_device *pwm_request_from_chip(struct pwm_chip *chip,
 struct pwm_device *pwm_get(struct device *dev, const char *consumer);
 void pwm_put(struct pwm_device *pwm);
 
+struct pwm_device *devm_pwm_get(struct device *dev, const char *consumer);
+void devm_pwm_put(struct device *dev, struct pwm_device *pwm);
+#else
+static inline int pwm_set_chip_data(struct pwm_device *pwm, void *data)
+{
+	return -EINVAL;
+}
+
+static inline void *pwm_get_chip_data(struct pwm_device *pwm)
+{
+	return NULL;
+}
+
+static inline int pwmchip_add(struct pwm_chip *chip)
+{
+	return -EINVAL;
+}
+
+static inline int pwmchip_remove(struct pwm_chip *chip)
+{
+	return -EINVAL;
+}
+
+static inline struct pwm_device *pwm_request_from_chip(struct pwm_chip *chip,
+						       unsigned int index,
+						       const char *label)
+{
+	return ERR_PTR(-ENODEV);
+}
+
+static inline struct pwm_device *pwm_get(struct device *dev,
+					 const char *consumer)
+{
+	return ERR_PTR(-ENODEV);
+}
+
+static inline void pwm_put(struct pwm_device *pwm)
+{
+}
+
+static inline struct pwm_device *devm_pwm_get(struct device *dev,
+					      const char *consumer)
+{
+	return ERR_PTR(-ENODEV);
+}
+
+static inline void devm_pwm_put(struct device *dev, struct pwm_device *pwm)
+{
+}
+#endif
+
 struct pwm_lookup {
 	struct list_head list;
 	const char *provider;
@@ -141,8 +241,12 @@ struct pwm_lookup {
 		.con_id = _con_id,			\
 	}
 
+#if IS_ENABLED(CONFIG_PWM)
 void pwm_add_table(struct pwm_lookup *table, size_t num);
-
+#else
+static inline void pwm_add_table(struct pwm_lookup *table, size_t num)
+{
+}
 #endif
 
 #endif /* __LINUX_PWM_H */