Merge branch 'i2c-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6

* 'i2c-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6: (56 commits)
  i2c: Add detection capability to new-style drivers
  i2c: Call client_unregister for new-style devices too
  i2c: Clean up old chip drivers
  i2c-ibm_iic: Register child nodes
  i2c: New-style EEPROM driver using device IDs
  i2c: Export the i2c_bus_type symbol
  i2c-au1550: Fix PM support
  i2c-dev: Delete empty detach_client callback
  i2c: Drop stray references to lm_sensors
  i2c: Check for ACPI resource conflicts
  i2c-ocores: basic PM support
  i2c-sibyte: SWARM I2C board initialization
  i2c-i801: Fix handling of error conditions
  i2c-i801: Rename local variable temp to status
  i2c-i801: Properly report bus arbitration loss
  i2c-i801: Remove verbose debugging messages
  i2c-algo-pcf: Drop unused struct members
  i2c-algo-pcf: Multi-master lost-arbitration improvement
  i2c: Deprecate the legacy gpio drivers
  i2c-pxa: Initialize early
  ...

4 files changed, 70 insertions, 15 deletions

diff --git a/include/linux/i2c-algo-pcf.h b/include/linux/i2c-algo-pcf.h
index 77afbb60fd1..0177d280f73 100644
--- a/include/linux/i2c-algo-pcf.h
+++ b/include/linux/i2c-algo-pcf.h
@@ -33,9 +33,11 @@ struct i2c_algo_pcf_data {
 	int  (*getclock) (void *data);
 	void (*waitforpin) (void);
 
-	/* local settings */
-	int udelay;
-	int timeout;
+	/* Multi-master lost arbitration back-off delay (msecs)
+	 * This should be set by the bus adapter or knowledgable client
+	 * if bus is multi-mastered, else zero
+	 */
+	unsigned long lab_mdelay;
 };
 
 int i2c_pcf_add_bus(struct i2c_adapter *);
diff --git a/include/linux/i2c-id.h b/include/linux/i2c-id.h
index 580acc93903..ef13b7c66df 100644
--- a/include/linux/i2c-id.h
+++ b/include/linux/i2c-id.h
@@ -91,8 +91,6 @@
 #define I2C_DRIVERID_M52790 	95      /* Mitsubishi M52790SP/FP AV switch */
 #define I2C_DRIVERID_CS5345	96	/* cs5345 audio processor	*/
 
-#define I2C_DRIVERID_I2CDEV	900
-
 #define I2C_DRIVERID_OV7670 1048	/* Omnivision 7670 camera */
 
 /*
@@ -111,7 +109,6 @@
 #define I2C_HW_B_RIVA		0x010010 /* Riva based graphics cards */
 #define I2C_HW_B_IOC		0x010011 /* IOC bit-wiggling */
 #define I2C_HW_B_IXP2000	0x010016 /* GPIO on IXP2000 systems */
-#define I2C_HW_B_S3VIA		0x010018 /* S3Via ProSavage adapter */
 #define I2C_HW_B_ZR36067	0x010019 /* Zoran-36057/36067 based boards */
 #define I2C_HW_B_PCILYNX	0x01001a /* TI PCILynx I2C adapter */
 #define I2C_HW_B_CX2388x	0x01001b /* connexant 2388x based tv cards */
diff --git a/include/linux/i2c.h b/include/linux/i2c.h
index 8dc73013219..08be0d21864 100644
--- a/include/linux/i2c.h
+++ b/include/linux/i2c.h
@@ -35,6 +35,8 @@
 #include <linux/sched.h>	/* for completion */
 #include <linux/mutex.h>
 
+extern struct bus_type i2c_bus_type;
+
 /* --- General options ------------------------------------------------	*/
 
 struct i2c_msg;
@@ -43,6 +45,7 @@ struct i2c_adapter;
 struct i2c_client;
 struct i2c_driver;
 union i2c_smbus_data;
+struct i2c_board_info;
 
 /*
  * The master routines are the ones normally used to transmit data to devices
@@ -69,9 +72,8 @@ extern s32 i2c_smbus_xfer (struct i2c_adapter * adapter, u16 addr,
                            union i2c_smbus_data * data);
 
 /* Now follow the 'nice' access routines. These also document the calling
-   conventions of smbus_access. */
+   conventions of i2c_smbus_xfer. */
 
-extern s32 i2c_smbus_write_quick(struct i2c_client * client, u8 value);
 extern s32 i2c_smbus_read_byte(struct i2c_client * client);
 extern s32 i2c_smbus_write_byte(struct i2c_client * client, u8 value);
 extern s32 i2c_smbus_read_byte_data(struct i2c_client * client, u8 command);
@@ -93,15 +95,33 @@ extern s32 i2c_smbus_write_i2c_block_data(struct i2c_client * client,
 					  u8 command, u8 length,
 					  const u8 *values);
 
-/*
- * A driver is capable of handling one or more physical devices present on
- * I2C adapters. This information is used to inform the driver of adapter
- * events.
+/**
+ * struct i2c_driver - represent an I2C device driver
+ * @class: What kind of i2c device we instantiate (for detect)
+ * @detect: Callback for device detection
+ * @address_data: The I2C addresses to probe, ignore or force (for detect)
+ * @clients: List of detected clients we created (for i2c-core use only)
  *
  * The driver.owner field should be set to the module owner of this driver.
  * The driver.name field should be set to the name of this driver.
+ *
+ * For automatic device detection, both @detect and @address_data must
+ * be defined. @class should also be set, otherwise only devices forced
+ * with module parameters will be created. The detect function must
+ * fill at least the name field of the i2c_board_info structure it is
+ * handed upon successful detection, and possibly also the flags field.
+ *
+ * If @detect is missing, the driver will still work fine for enumerated
+ * devices. Detected devices simply won't be supported. This is expected
+ * for the many I2C/SMBus devices which can't be detected reliably, and
+ * the ones which can always be enumerated in practice.
+ *
+ * The i2c_client structure which is handed to the @detect callback is
+ * not a real i2c_client. It is initialized just enough so that you can
+ * call i2c_smbus_read_byte_data and friends on it. Don't do anything
+ * else with it. In particular, calling dev_dbg and friends on it is
+ * not allowed.
  */
-
 struct i2c_driver {
 	int id;
 	unsigned int class;
@@ -141,6 +161,11 @@ struct i2c_driver {
 
 	struct device_driver driver;
 	const struct i2c_device_id *id_table;
+
+	/* Device detection callback for automatic device creation */
+	int (*detect)(struct i2c_client *, int kind, struct i2c_board_info *);
+	const struct i2c_client_address_data *address_data;
+	struct list_head clients;
 };
 #define to_i2c_driver(d) container_of(d, struct i2c_driver, driver)
 
@@ -156,6 +181,7 @@ struct i2c_driver {
  * @dev: Driver model device node for the slave.
  * @irq: indicates the IRQ generated by this device (if any)
  * @list: list of active/busy clients (DEPRECATED)
+ * @detected: member of an i2c_driver.clients list
  * @released: used to synchronize client releases & detaches and references
  *
  * An i2c_client identifies a single device (i.e. chip) connected to an
@@ -173,6 +199,7 @@ struct i2c_client {
 	struct device dev;		/* the device structure		*/
 	int irq;			/* irq issued by device		*/
 	struct list_head list;		/* DEPRECATED */
+	struct list_head detected;
 	struct completion released;
 };
 #define to_i2c_client(d) container_of(d, struct i2c_client, dev)
@@ -350,10 +377,11 @@ static inline void i2c_set_adapdata (struct i2c_adapter *dev, void *data)
 #define I2C_CLASS_HWMON		(1<<0)	/* lm_sensors, ... */
 #define I2C_CLASS_TV_ANALOG	(1<<1)	/* bttv + friends */
 #define I2C_CLASS_TV_DIGITAL	(1<<2)	/* dvb cards */
-#define I2C_CLASS_DDC		(1<<3)	/* i2c-matroxfb ? */
+#define I2C_CLASS_DDC		(1<<3)	/* DDC bus on graphics adapters */
 #define I2C_CLASS_CAM_ANALOG	(1<<4)	/* camera with analog CCD */
 #define I2C_CLASS_CAM_DIGITAL	(1<<5)	/* most webcams */
 #define I2C_CLASS_SOUND		(1<<6)	/* sound devices */
+#define I2C_CLASS_SPD		(1<<7)	/* SPD EEPROMs and similar */
 #define I2C_CLASS_ALL		(UINT_MAX) /* all of the above */
 
 /* i2c_client_address_data is the struct for holding default client
@@ -537,7 +565,7 @@ union i2c_smbus_data {
 	                       /* and one more for user-space compatibility */
 };
 
-/* smbus_access read or write markers */
+/* i2c_smbus_xfer read or write markers */
 #define I2C_SMBUS_READ	1
 #define I2C_SMBUS_WRITE	0
 
diff --git a/include/linux/i2c/at24.h b/include/linux/i2c/at24.h
new file mode 100644
index 00000000000..f6edd522a92
--- /dev/null
+++ b/include/linux/i2c/at24.h
@@ -0,0 +1,28 @@
+#ifndef _LINUX_AT24_H
+#define _LINUX_AT24_H
+
+#include <linux/types.h>
+
+/*
+ * As seen through Linux I2C, differences between the most common types of I2C
+ * memory include:
+ * - How much memory is available (usually specified in bit)?
+ * - What write page size does it support?
+ * - Special flags (16 bit addresses, read_only, world readable...)?
+ *
+ * If you set up a custom eeprom type, please double-check the parameters.
+ * Especially page_size needs extra care, as you risk data loss if your value
+ * is bigger than what the chip actually supports!
+ */
+
+struct at24_platform_data {
+	u32		byte_len;		/* size (sum of all addr) */
+	u16		page_size;		/* for writes */
+	u8		flags;
+#define AT24_FLAG_ADDR16	0x80	/* address pointer is 16 bit */
+#define AT24_FLAG_READONLY	0x40	/* sysfs-entry will be read-only */
+#define AT24_FLAG_IRUGO		0x20	/* sysfs-entry will be world-readable */
+#define AT24_FLAG_TAKE8ADDR	0x10	/* take always 8 addresses (24c00) */
+};
+
+#endif /* _LINUX_AT24_H */