Merge branch 'i2c-embedded/for-next' of git://git.pengutronix.de/git/wsa/linux

Pull i2c-embedded changes from Wolfram Sang:
 - CBUS driver (an I2C variant)
 - continued rework of the omap driver
 - s3c2410 gets lots of fixes and gains pinctrl support
 - at91 gains DMA support
 - the GPIO muxer gains devicetree probing
 - typical fixes and additions all over

* 'i2c-embedded/for-next' of git://git.pengutronix.de/git/wsa/linux: (45 commits)
  i2c: omap: Remove the OMAP_I2C_FLAG_RESET_REGS_POSTIDLE flag
  i2c: at91: add dma support
  i2c: at91: change struct members indentation
  i2c: at91: fix compilation warning
  i2c: mxs: Do not disable the I2C SMBus quick mode
  i2c: mxs: Handle i2c DMA failure properly
  i2c: s3c2410: Remove recently introduced performance overheads
  i2c: ocores: Move grlib set/get functions into #ifdef CONFIG_OF block
  i2c: s3c2410: Add fix for i2c suspend/resume
  i2c: s3c2410: Fix code to free gpios
  i2c: i2c-cbus-gpio: introduce driver
  i2c: ocores: Add support for the GRLIB port of the controller and use function pointers for getreg and setreg functions
  i2c: ocores: Add irq support for sparc
  i2c: omap: Move the remove constraint
  ARM: dts: cfa10049: Add the i2c muxer buses to the CFA-10049
  i2c: s3c2410: do not special case HDMIPHY stuck bus detection
  i2c: s3c2410: use exponential back off while polling for bus idle
  i2c: s3c2410: do not generate STOP for QUIRK_HDMIPHY
  i2c: s3c2410: grab adapter lock while changing i2c clock
  i2c: s3c2410: Add support for pinctrl
  ...

3 files changed, 28 insertions, 2 deletions

diff --git a/include/linux/i2c-omap.h b/include/linux/i2c-omap.h
index 92a0dc75bc7..babe0cf6d56 100644
--- a/include/linux/i2c-omap.h
+++ b/include/linux/i2c-omap.h
@@ -20,8 +20,6 @@
 #define OMAP_I2C_FLAG_NO_FIFO			BIT(0)
 #define OMAP_I2C_FLAG_SIMPLE_CLOCK		BIT(1)
 #define OMAP_I2C_FLAG_16BIT_DATA_REG		BIT(2)
-#define OMAP_I2C_FLAG_RESET_REGS_POSTIDLE	BIT(3)
-#define OMAP_I2C_FLAG_APPLY_ERRATA_I207	BIT(4)
 #define OMAP_I2C_FLAG_ALWAYS_ARMXOR_CLK	BIT(5)
 #define OMAP_I2C_FLAG_FORCE_19200_INT_CLK	BIT(6)
 /* how the CPU address bus must be translated for I2C unit access */
diff --git a/include/linux/i2c/i2c-sh_mobile.h b/include/linux/i2c/i2c-sh_mobile.h
index beda7081aea..06e3089795f 100644
--- a/include/linux/i2c/i2c-sh_mobile.h
+++ b/include/linux/i2c/i2c-sh_mobile.h
@@ -5,6 +5,7 @@
 
 struct i2c_sh_mobile_platform_data {
 	unsigned long bus_speed;
+	unsigned int clks_per_count;
 };
 
 #endif /* __I2C_SH_MOBILE_H__ */
diff --git a/include/linux/platform_data/i2c-cbus-gpio.h b/include/linux/platform_data/i2c-cbus-gpio.h
new file mode 100644
index 00000000000..6faa992a950
--- /dev/null
+++ b/include/linux/platform_data/i2c-cbus-gpio.h
@@ -0,0 +1,27 @@
+/*
+ * i2c-cbus-gpio.h - CBUS I2C platform_data definition
+ *
+ * Copyright (C) 2004-2009 Nokia Corporation
+ *
+ * Written by Felipe Balbi and Aaro Koskinen.
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License. See the file "COPYING" in the main directory of this
+ * archive for more details.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __INCLUDE_LINUX_I2C_CBUS_GPIO_H
+#define __INCLUDE_LINUX_I2C_CBUS_GPIO_H
+
+struct i2c_cbus_platform_data {
+	int dat_gpio;
+	int clk_gpio;
+	int sel_gpio;
+};
+
+#endif /* __INCLUDE_LINUX_I2C_CBUS_GPIO_H */