diff options
| author | Mark Brown <broonie@opensource.wolfsonmicro.com> | 2009-12-21 12:21:52 +0000 |
|---|---|---|
| committer | Liam Girdwood <lrg@slimlogic.co.uk> | 2010-03-03 14:49:23 +0000 |
| commit | 31aae2beeb3d601d556b6a8c39085940ad1e9f42 (patch) | |
| tree | 7a608cabf48e020c5d23e8a96a59c095f0946d2b /include | |
| parent | 84b6826306119dc3c41ef9d7ed6c408112f63301 (diff) | |
regulator: Allow regulators to specify the time taken to ramp on enable
Regulators may sometimes take longer to enable than the control operation
used to do so, either because the regulator has ramp rate control used to
limit inrush current or because the control operation is very fast (GPIO
being the most common example of this). In order to ensure that consumers
do not rely on the regulator before it is enabled provide an enable_time()
operation and have the core delay for that time before returning to the
caller.
This is implemented as a function since the ramp rate may be specified in
voltage per unit time and therefore the time depend on the configuration.
In future it would be desirable to allow the bulk operations to run the
delays for multiple enables in parallel but this is not currently supported.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Diffstat (limited to 'include')
| -rw-r--r-- | include/linux/regulator/driver.h | 6 |
1 files changed, 6 insertions, 0 deletions
diff --git a/include/linux/regulator/driver.h b/include/linux/regulator/driver.h index 31f2055eae2..592cd7c642c 100644 --- a/include/linux/regulator/driver.h +++ b/include/linux/regulator/driver.h @@ -58,6 +58,9 @@ enum regulator_status { * @get_optimum_mode: Get the most efficient operating mode for the regulator * when running with the specified parameters. * + * @enable_time: Time taken for the regulator voltage output voltage to + * stabalise after being enabled, in microseconds. + * * @set_suspend_voltage: Set the voltage for the regulator when the system * is suspended. * @set_suspend_enable: Mark the regulator as enabled when the system is @@ -93,6 +96,9 @@ struct regulator_ops { int (*set_mode) (struct regulator_dev *, unsigned int mode); unsigned int (*get_mode) (struct regulator_dev *); + /* Time taken to enable the regulator */ + int (*enable_time) (struct regulator_dev *); + /* report regulator status ... most other accessors report * control inputs, this reports results of combining inputs * from Linux (and other sources) with the actual load. |