Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6

10 files changed, 633 insertions, 53 deletions

diff --git a/include/linux/ath9k_platform.h b/include/linux/ath9k_platform.h
new file mode 100644
index 00000000000..b847fc7b93f
--- /dev/null
+++ b/include/linux/ath9k_platform.h
@@ -0,0 +1,28 @@
+/*
+ * Copyright (c) 2008 Atheros Communications Inc.
+ * Copyright (c) 2009 Gabor Juhos <juhosg@openwrt.org>
+ * Copyright (c) 2009 Imre Kaloz <kaloz@openwrt.org>
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#ifndef _LINUX_ATH9K_PLATFORM_H
+#define _LINUX_ATH9K_PLATFORM_H
+
+#define ATH9K_PLAT_EEP_MAX_WORDS	2048
+
+struct ath9k_platform_data {
+	u16 eeprom_data[ATH9K_PLAT_EEP_MAX_WORDS];
+};
+
+#endif /* _LINUX_ATH9K_PLATFORM_H */
diff --git a/include/linux/ieee80211.h b/include/linux/ieee80211.h
index c4e6ca1a630..b1bb817d142 100644
--- a/include/linux/ieee80211.h
+++ b/include/linux/ieee80211.h
@@ -527,6 +527,8 @@ struct ieee80211_tim_ie {
 	u8 virtual_map[0];
 } __attribute__ ((packed));
 
+#define WLAN_SA_QUERY_TR_ID_LEN 16
+
 struct ieee80211_mgmt {
 	__le16 frame_control;
 	__le16 duration;
@@ -646,6 +648,10 @@ struct ieee80211_mgmt {
 					u8 action_code;
 					u8 variable[0];
 				} __attribute__((packed)) mesh_action;
+				struct {
+					u8 action;
+					u8 trans_id[WLAN_SA_QUERY_TR_ID_LEN];
+				} __attribute__ ((packed)) sa_query;
 			} u;
 		} __attribute__ ((packed)) action;
 	} u;
@@ -655,6 +661,15 @@ struct ieee80211_mgmt {
 #define IEEE80211_MIN_ACTION_SIZE offsetof(struct ieee80211_mgmt, u.action.u)
 
 
+/* Management MIC information element (IEEE 802.11w) */
+struct ieee80211_mmie {
+	u8 element_id;
+	u8 length;
+	__le16 key_id;
+	u8 sequence_number[6];
+	u8 mic[8];
+} __attribute__ ((packed));
+
 /* Control frames */
 struct ieee80211_rts {
 	__le16 frame_control;
@@ -899,6 +914,9 @@ enum ieee80211_statuscode {
 	/* 802.11g */
 	WLAN_STATUS_ASSOC_DENIED_NOSHORTTIME = 25,
 	WLAN_STATUS_ASSOC_DENIED_NODSSSOFDM = 26,
+	/* 802.11w */
+	WLAN_STATUS_ASSOC_REJECTED_TEMPORARILY = 30,
+	WLAN_STATUS_ROBUST_MGMT_FRAME_POLICY_VIOLATION = 31,
 	/* 802.11i */
 	WLAN_STATUS_INVALID_IE = 40,
 	WLAN_STATUS_INVALID_GROUP_CIPHER = 41,
@@ -1018,6 +1036,8 @@ enum ieee80211_eid {
 	WLAN_EID_HT_INFORMATION = 61,
 	/* 802.11i */
 	WLAN_EID_RSN = 48,
+	WLAN_EID_TIMEOUT_INTERVAL = 56,
+	WLAN_EID_MMIE = 76 /* 802.11w */,
 	WLAN_EID_WPA = 221,
 	WLAN_EID_GENERIC = 221,
 	WLAN_EID_VENDOR_SPECIFIC = 221,
@@ -1030,6 +1050,8 @@ enum ieee80211_category {
 	WLAN_CATEGORY_QOS = 1,
 	WLAN_CATEGORY_DLS = 2,
 	WLAN_CATEGORY_BACK = 3,
+	WLAN_CATEGORY_PUBLIC = 4,
+	WLAN_CATEGORY_SA_QUERY = 8,
 	WLAN_CATEGORY_WMM = 17,
 };
 
@@ -1104,6 +1126,12 @@ struct ieee80211_country_ie_triplet {
 	};
 } __attribute__ ((packed));
 
+enum ieee80211_timeout_interval_type {
+	WLAN_TIMEOUT_REASSOC_DEADLINE = 1 /* 802.11r */,
+	WLAN_TIMEOUT_KEY_LIFETIME = 2 /* 802.11r */,
+	WLAN_TIMEOUT_ASSOC_COMEBACK = 3 /* 802.11w */,
+};
+
 /* BACK action code */
 enum ieee80211_back_actioncode {
 	WLAN_ACTION_ADDBA_REQ = 0,
@@ -1118,6 +1146,13 @@ enum ieee80211_back_parties {
 	WLAN_BACK_TIMER = 2,
 };
 
+/* SA Query action */
+enum ieee80211_sa_query_action {
+	WLAN_ACTION_SA_QUERY_REQUEST = 0,
+	WLAN_ACTION_SA_QUERY_RESPONSE = 1,
+};
+
+
 /* A-MSDU 802.11n */
 #define IEEE80211_QOS_CONTROL_A_MSDU_PRESENT 0x0080
 
@@ -1128,6 +1163,7 @@ enum ieee80211_back_parties {
 /* reserved: 				0x000FAC03 */
 #define WLAN_CIPHER_SUITE_CCMP		0x000FAC04
 #define WLAN_CIPHER_SUITE_WEP104	0x000FAC05
+#define WLAN_CIPHER_SUITE_AES_CMAC	0x000FAC06
 
 #define WLAN_MAX_KEY_LEN		32
 
@@ -1185,4 +1221,149 @@ static inline u8 *ieee80211_get_DA(struct ieee80211_hdr *hdr)
 		return hdr->addr1;
 }
 
+/**
+ * ieee80211_is_robust_mgmt_frame - check if frame is a robust management frame
+ * @hdr: the frame (buffer must include at least the first octet of payload)
+ */
+static inline bool ieee80211_is_robust_mgmt_frame(struct ieee80211_hdr *hdr)
+{
+	if (ieee80211_is_disassoc(hdr->frame_control) ||
+	    ieee80211_is_deauth(hdr->frame_control))
+		return true;
+
+	if (ieee80211_is_action(hdr->frame_control)) {
+		u8 *category;
+
+		/*
+		 * Action frames, excluding Public Action frames, are Robust
+		 * Management Frames. However, if we are looking at a Protected
+		 * frame, skip the check since the data may be encrypted and
+		 * the frame has already been found to be a Robust Management
+		 * Frame (by the other end).
+		 */
+		if (ieee80211_has_protected(hdr->frame_control))
+			return true;
+		category = ((u8 *) hdr) + 24;
+		return *category != WLAN_CATEGORY_PUBLIC;
+	}
+
+	return false;
+}
+
+/**
+ * ieee80211_fhss_chan_to_freq - get channel frequency
+ * @channel: the FHSS channel
+ *
+ * Convert IEEE802.11 FHSS channel to frequency (MHz)
+ * Ref IEEE 802.11-2007 section 14.6
+ */
+static inline int ieee80211_fhss_chan_to_freq(int channel)
+{
+	if ((channel > 1) && (channel < 96))
+		return channel + 2400;
+	else
+		return -1;
+}
+
+/**
+ * ieee80211_freq_to_fhss_chan - get channel
+ * @freq: the channels frequency
+ *
+ * Convert frequency (MHz) to IEEE802.11 FHSS channel
+ * Ref IEEE 802.11-2007 section 14.6
+ */
+static inline int ieee80211_freq_to_fhss_chan(int freq)
+{
+	if ((freq > 2401) && (freq < 2496))
+		return freq - 2400;
+	else
+		return -1;
+}
+
+/**
+ * ieee80211_dsss_chan_to_freq - get channel center frequency
+ * @channel: the DSSS channel
+ *
+ * Convert IEEE802.11 DSSS channel to the center frequency (MHz).
+ * Ref IEEE 802.11-2007 section 15.6
+ */
+static inline int ieee80211_dsss_chan_to_freq(int channel)
+{
+	if ((channel > 0) && (channel < 14))
+		return 2407 + (channel * 5);
+	else if (channel == 14)
+		return 2484;
+	else
+		return -1;
+}
+
+/**
+ * ieee80211_freq_to_dsss_chan - get channel
+ * @freq: the frequency
+ *
+ * Convert frequency (MHz) to IEEE802.11 DSSS channel
+ * Ref IEEE 802.11-2007 section 15.6
+ *
+ * This routine selects the channel with the closest center frequency.
+ */
+static inline int ieee80211_freq_to_dsss_chan(int freq)
+{
+	if ((freq >= 2410) && (freq < 2475))
+		return (freq - 2405) / 5;
+	else if ((freq >= 2482) && (freq < 2487))
+		return 14;
+	else
+		return -1;
+}
+
+/* Convert IEEE802.11 HR DSSS channel to frequency (MHz) and back
+ * Ref IEEE 802.11-2007 section 18.4.6.2
+ *
+ * The channels and frequencies are the same as those defined for DSSS
+ */
+#define ieee80211_hr_chan_to_freq(chan) ieee80211_dsss_chan_to_freq(chan)
+#define ieee80211_freq_to_hr_chan(freq) ieee80211_freq_to_dsss_chan(freq)
+
+/* Convert IEEE802.11 ERP channel to frequency (MHz) and back
+ * Ref IEEE 802.11-2007 section 19.4.2
+ */
+#define ieee80211_erp_chan_to_freq(chan) ieee80211_hr_chan_to_freq(chan)
+#define ieee80211_freq_to_erp_chan(freq) ieee80211_freq_to_hr_chan(freq)
+
+/**
+ * ieee80211_ofdm_chan_to_freq - get channel center frequency
+ * @s_freq: starting frequency == (dotChannelStartingFactor/2) MHz
+ * @channel: the OFDM channel
+ *
+ * Convert IEEE802.11 OFDM channel to center frequency (MHz)
+ * Ref IEEE 802.11-2007 section 17.3.8.3.2
+ */
+static inline int ieee80211_ofdm_chan_to_freq(int s_freq, int channel)
+{
+	if ((channel > 0) && (channel <= 200) &&
+	    (s_freq >= 4000))
+		return s_freq + (channel * 5);
+	else
+		return -1;
+}
+
+/**
+ * ieee80211_freq_to_ofdm_channel - get channel
+ * @s_freq: starting frequency == (dotChannelStartingFactor/2) MHz
+ * @freq: the frequency
+ *
+ * Convert frequency (MHz) to IEEE802.11 OFDM channel
+ * Ref IEEE 802.11-2007 section 17.3.8.3.2
+ *
+ * This routine selects the channel with the closest center frequency.
+ */
+static inline int ieee80211_freq_to_ofdm_chan(int s_freq, int freq)
+{
+	if ((freq > (s_freq + 2)) && (freq <= (s_freq + 1202)) &&
+	    (s_freq >= 4000))
+		return (freq + 2 - s_freq) / 5;
+	else
+		return -1;
+}
+
 #endif /* LINUX_IEEE80211_H */
diff --git a/include/linux/nl80211.h b/include/linux/nl80211.h
index e86ed59f9ad..76aae3d8e97 100644
--- a/include/linux/nl80211.h
+++ b/include/linux/nl80211.h
@@ -47,7 +47,7 @@
  * @NL80211_CMD_SET_WIPHY: set wiphy parameters, needs %NL80211_ATTR_WIPHY or
  *	%NL80211_ATTR_IFINDEX; can be used to set %NL80211_ATTR_WIPHY_NAME,
  *	%NL80211_ATTR_WIPHY_TXQ_PARAMS, %NL80211_ATTR_WIPHY_FREQ, and/or
- *	%NL80211_ATTR_WIPHY_SEC_CHAN_OFFSET.
+ *	%NL80211_ATTR_WIPHY_CHANNEL_TYPE.
  * @NL80211_CMD_NEW_WIPHY: Newly created wiphy, response to get request
  *	or rename notification. Has attributes %NL80211_ATTR_WIPHY and
  *	%NL80211_ATTR_WIPHY_NAME.
@@ -72,8 +72,8 @@
  *
  * @NL80211_CMD_GET_KEY: Get sequence counter information for a key specified
  *	by %NL80211_ATTR_KEY_IDX and/or %NL80211_ATTR_MAC.
- * @NL80211_CMD_SET_KEY: Set key attributes %NL80211_ATTR_KEY_DEFAULT or
- *	%NL80211_ATTR_KEY_THRESHOLD.
+ * @NL80211_CMD_SET_KEY: Set key attributes %NL80211_ATTR_KEY_DEFAULT,
+ *	%NL80211_ATTR_KEY_DEFAULT_MGMT, or %NL80211_ATTR_KEY_THRESHOLD.
  * @NL80211_CMD_NEW_KEY: add a key with given %NL80211_ATTR_KEY_DATA,
  *	%NL80211_ATTR_KEY_IDX, %NL80211_ATTR_MAC and %NL80211_ATTR_KEY_CIPHER
  *	attributes.
@@ -84,7 +84,7 @@
  *	%NL80222_CMD_NEW_BEACON message)
  * @NL80211_CMD_SET_BEACON: set the beacon on an access point interface
  *	using the %NL80211_ATTR_BEACON_INTERVAL, %NL80211_ATTR_DTIM_PERIOD,
- *	%NL80211_BEACON_HEAD and %NL80211_BEACON_TAIL attributes.
+ *	%NL80211_ATTR_BEACON_HEAD and %NL80211_ATTR_BEACON_TAIL attributes.
  * @NL80211_CMD_NEW_BEACON: add a new beacon to an access point interface,
  *	parameters are like for %NL80211_CMD_SET_BEACON.
  * @NL80211_CMD_DEL_BEACON: remove the beacon, stop sending it
@@ -133,6 +133,14 @@
  * @NL80211_CMD_SET_MESH_PARAMS: Set mesh networking properties for the
  *      interface identified by %NL80211_ATTR_IFINDEX
  *
+ * @NL80211_CMD_SET_MGMT_EXTRA_IE: Set extra IEs for management frames. The
+ *	interface is identified with %NL80211_ATTR_IFINDEX and the management
+ *	frame subtype with %NL80211_ATTR_MGMT_SUBTYPE. The extra IE data to be
+ *	added to the end of the specified management frame is specified with
+ *	%NL80211_ATTR_IE. If the command succeeds, the requested data will be
+ *	added to all specified management frames generated by
+ *	kernel/firmware/driver.
+ *
  * @NL80211_CMD_MAX: highest used command number
  * @__NL80211_CMD_AFTER_LAST: internal use
  */
@@ -178,6 +186,8 @@ enum nl80211_commands {
 	NL80211_CMD_GET_MESH_PARAMS,
 	NL80211_CMD_SET_MESH_PARAMS,
 
+	NL80211_CMD_SET_MGMT_EXTRA_IE,
+
 	/* add new commands above here */
 
 	/* used to define NL80211_CMD_MAX below */
@@ -190,6 +200,7 @@ enum nl80211_commands {
  * here
  */
 #define NL80211_CMD_SET_BSS NL80211_CMD_SET_BSS
+#define NL80211_CMD_SET_MGMT_EXTRA_IE NL80211_CMD_SET_MGMT_EXTRA_IE
 
 /**
  * enum nl80211_attrs - nl80211 netlink attributes
@@ -284,6 +295,12 @@ enum nl80211_commands {
  *	supported interface types, each a flag attribute with the number
  *	of the interface mode.
  *
+ * @NL80211_ATTR_MGMT_SUBTYPE: Management frame subtype for
+ *	%NL80211_CMD_SET_MGMT_EXTRA_IE.
+ *
+ * @NL80211_ATTR_IE: Information element(s) data (used, e.g., with
+ *	%NL80211_CMD_SET_MGMT_EXTRA_IE).
+ *
  * @NL80211_ATTR_MAX: highest attribute number currently defined
  * @__NL80211_ATTR_AFTER_LAST: internal use
  */
@@ -346,6 +363,11 @@ enum nl80211_attrs {
 	NL80211_ATTR_WIPHY_FREQ,
 	NL80211_ATTR_WIPHY_CHANNEL_TYPE,
 
+	NL80211_ATTR_KEY_DEFAULT_MGMT,
+
+	NL80211_ATTR_MGMT_SUBTYPE,
+	NL80211_ATTR_IE,
+
 	/* add attributes here, update the policy in nl80211.c */
 
 	__NL80211_ATTR_AFTER_LAST,
@@ -360,7 +382,9 @@ enum nl80211_attrs {
 #define NL80211_ATTR_BSS_BASIC_RATES NL80211_ATTR_BSS_BASIC_RATES
 #define NL80211_ATTR_WIPHY_TXQ_PARAMS NL80211_ATTR_WIPHY_TXQ_PARAMS
 #define NL80211_ATTR_WIPHY_FREQ NL80211_ATTR_WIPHY_FREQ
-#define NL80211_ATTR_WIPHY_SEC_CHAN_OFFSET NL80211_ATTR_WIPHY_SEC_CHAN_OFFSET
+#define NL80211_ATTR_WIPHY_CHANNEL_TYPE NL80211_ATTR_WIPHY_CHANNEL_TYPE
+#define NL80211_ATTR_MGMT_SUBTYPE NL80211_ATTR_MGMT_SUBTYPE
+#define NL80211_ATTR_IE NL80211_ATTR_IE
 
 #define NL80211_MAX_SUPP_RATES			32
 #define NL80211_MAX_SUPP_REG_RULES		32
@@ -412,12 +436,14 @@ enum nl80211_iftype {
  * @NL80211_STA_FLAG_SHORT_PREAMBLE: station is capable of receiving frames
  *	with short barker preamble
  * @NL80211_STA_FLAG_WME: station is WME/QoS capable
+ * @NL80211_STA_FLAG_MFP: station uses management frame protection
  */
 enum nl80211_sta_flags {
 	__NL80211_STA_FLAG_INVALID,
 	NL80211_STA_FLAG_AUTHORIZED,
 	NL80211_STA_FLAG_SHORT_PREAMBLE,
 	NL80211_STA_FLAG_WME,
+	NL80211_STA_FLAG_MFP,
 
 	/* keep last */
 	__NL80211_STA_FLAG_AFTER_LAST,
diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h
index 2370184e365..966e0233299 100644
--- a/include/linux/pci_ids.h
+++ b/include/linux/pci_ids.h
@@ -834,6 +834,8 @@
 #define PCI_DEVICE_ID_PROMISE_20276	0x5275
 #define PCI_DEVICE_ID_PROMISE_20277	0x7275
 
+#define PCI_VENDOR_ID_FOXCONN		0x105b
+
 #define PCI_VENDOR_ID_UMC		0x1060
 #define PCI_DEVICE_ID_UMC_UM8673F	0x0101
 #define PCI_DEVICE_ID_UMC_UM8886BF	0x673a
@@ -1969,6 +1971,8 @@
 
 #define PCI_VENDOR_ID_SAMSUNG		0x144d
 
+#define PCI_VENDOR_ID_AMBIT		0x1468
+
 #define PCI_VENDOR_ID_MYRICOM		0x14c1
 
 #define PCI_VENDOR_ID_TITAN		0x14D2
diff --git a/include/linux/spi/libertas_spi.h b/include/linux/spi/libertas_spi.h
new file mode 100644
index 00000000000..ada71b4f378
--- /dev/null
+++ b/include/linux/spi/libertas_spi.h
@@ -0,0 +1,25 @@
+/*
+ * board-specific data for the libertas_spi driver.
+ *
+ * Copyright 2008 Analog Devices Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or (at
+ * your option) any later version.
+ */
+#ifndef _LIBERTAS_SPI_H_
+#define _LIBERTAS_SPI_H_
+struct libertas_spi_platform_data {
+	/* There are two ways to read data from the WLAN module's SPI
+	 * interface. Setting 0 or 1 here controls which one is used.
+	 *
+	 * Usually you want to set use_dummy_writes = 1.
+	 * However, if that doesn't work or if you are using a slow SPI clock
+	 * speed, you may want to use 0 here. */
+	u16 use_dummy_writes;
+
+	/* GPIO number to use as chip select */
+	u16 gpio_cs;
+};
+#endif
diff --git a/include/linux/ssb/ssb_regs.h b/include/linux/ssb/ssb_regs.h
index 99a0f991e85..a01b982b578 100644
--- a/include/linux/ssb/ssb_regs.h
+++ b/include/linux/ssb/ssb_regs.h
@@ -326,6 +326,42 @@
 #define  SSB_SPROM5_GPIOB_P3		0xFF00	/* Pin 3 */
 #define  SSB_SPROM5_GPIOB_P3_SHIFT	8
 
+/* SPROM Revision 8 */
+#define SSB_SPROM8_BFLLO		0x1084	/* Boardflags (low 16 bits) */
+#define SSB_SPROM8_BFLHI		0x1086	/* Boardflags Hi */
+#define SSB_SPROM8_IL0MAC		0x108C	/* 6 byte MAC address */
+#define SSB_SPROM8_CCODE		0x1092	/* 2 byte country code */
+#define SSB_SPROM8_ANTAVAIL		0x109C  /* Antenna available bitfields*/
+#define SSB_SPROM8_ANTAVAIL_A		0xFF00	/* A-PHY bitfield */
+#define SSB_SPROM8_ANTAVAIL_A_SHIFT	8
+#define SSB_SPROM8_ANTAVAIL_BG		0x00FF	/* B-PHY and G-PHY bitfield */
+#define SSB_SPROM8_ANTAVAIL_BG_SHIFT	0
+#define SSB_SPROM8_AGAIN01		0x109E	/* Antenna Gain (in dBm Q5.2) */
+#define  SSB_SPROM8_AGAIN0		0x00FF	/* Antenna 0 */
+#define  SSB_SPROM8_AGAIN0_SHIFT	0
+#define  SSB_SPROM8_AGAIN1		0xFF00	/* Antenna 1 */
+#define  SSB_SPROM8_AGAIN1_SHIFT	8
+#define SSB_SPROM8_AGAIN23		0x10A0
+#define  SSB_SPROM8_AGAIN2		0x00FF	/* Antenna 2 */
+#define  SSB_SPROM8_AGAIN2_SHIFT	0
+#define  SSB_SPROM8_AGAIN3		0xFF00	/* Antenna 3 */
+#define  SSB_SPROM8_AGAIN3_SHIFT	8
+#define SSB_SPROM8_GPIOA		0x1096	/*Gen. Purpose IO # 0 and 1 */
+#define  SSB_SPROM8_GPIOA_P0		0x00FF	/* Pin 0 */
+#define  SSB_SPROM8_GPIOA_P1		0xFF00	/* Pin 1 */
+#define  SSB_SPROM8_GPIOA_P1_SHIFT	8
+#define SSB_SPROM8_GPIOB		0x1098	/* Gen. Purpose IO # 2 and 3 */
+#define  SSB_SPROM8_GPIOB_P2		0x00FF	/* Pin 2 */
+#define  SSB_SPROM8_GPIOB_P3		0xFF00	/* Pin 3 */
+#define  SSB_SPROM8_GPIOB_P3_SHIFT	8
+#define SSB_SPROM8_MAXP_BG		0x10C0  /* Max Power BG in path 1 */
+#define  SSB_SPROM8_MAXP_BG_MASK	0x00FF  /* Mask for Max Power BG */
+#define  SSB_SPROM8_ITSSI_BG		0xFF00	/* Mask for path 1 itssi_bg */
+#define  SSB_SPROM8_ITSSI_BG_SHIFT	8
+#define SSB_SPROM8_MAXP_A		0x10C8  /* Max Power A in path 1 */
+#define  SSB_SPROM8_MAXP_A_MASK		0x00FF  /* Mask for Max Power A */
+#define  SSB_SPROM8_ITSSI_A		0xFF00	/* Mask for path 1 itssi_a */
+#define  SSB_SPROM8_ITSSI_A_SHIFT	8
 
 /* Values for SSB_SPROM1_BINF_CCODE */
 enum {
diff --git a/include/linux/wireless.h b/include/linux/wireless.h
index d7958f9b52c..cb24204851f 100644
--- a/include/linux/wireless.h
+++ b/include/linux/wireless.h
@@ -577,18 +577,22 @@
 #define IW_AUTH_RX_UNENCRYPTED_EAPOL	8
 #define IW_AUTH_ROAMING_CONTROL		9
 #define IW_AUTH_PRIVACY_INVOKED		10
+#define IW_AUTH_CIPHER_GROUP_MGMT	11
+#define IW_AUTH_MFP			12
 
 /* IW_AUTH_WPA_VERSION values (bit field) */
 #define IW_AUTH_WPA_VERSION_DISABLED	0x00000001
 #define IW_AUTH_WPA_VERSION_WPA		0x00000002
 #define IW_AUTH_WPA_VERSION_WPA2	0x00000004
 
-/* IW_AUTH_PAIRWISE_CIPHER and IW_AUTH_GROUP_CIPHER values (bit field) */
+/* IW_AUTH_PAIRWISE_CIPHER, IW_AUTH_GROUP_CIPHER, and IW_AUTH_CIPHER_GROUP_MGMT
+ * values (bit field) */
 #define IW_AUTH_CIPHER_NONE	0x00000001
 #define IW_AUTH_CIPHER_WEP40	0x00000002
 #define IW_AUTH_CIPHER_TKIP	0x00000004
 #define IW_AUTH_CIPHER_CCMP	0x00000008
 #define IW_AUTH_CIPHER_WEP104	0x00000010
+#define IW_AUTH_CIPHER_AES_CMAC	0x00000020
 
 /* IW_AUTH_KEY_MGMT values (bit field) */
 #define IW_AUTH_KEY_MGMT_802_1X	1
@@ -604,6 +608,11 @@
 #define IW_AUTH_ROAMING_DISABLE	1	/* user space program used for roaming
 					 * control */
 
+/* IW_AUTH_MFP (management frame protection) values */
+#define IW_AUTH_MFP_DISABLED	0	/* MFP disabled */
+#define IW_AUTH_MFP_OPTIONAL	1	/* MFP optional */
+#define IW_AUTH_MFP_REQUIRED	2	/* MFP required */
+
 /* SIOCSIWENCODEEXT definitions */
 #define IW_ENCODE_SEQ_MAX_SIZE	8
 /* struct iw_encode_ext ->alg */
@@ -612,6 +621,7 @@
 #define IW_ENCODE_ALG_TKIP	2
 #define IW_ENCODE_ALG_CCMP	3
 #define IW_ENCODE_ALG_PMK	4
+#define IW_ENCODE_ALG_AES_CMAC	5
 /* struct iw_encode_ext ->ext_flags */
 #define IW_ENCODE_EXT_TX_SEQ_VALID	0x00000001
 #define IW_ENCODE_EXT_RX_SEQ_VALID	0x00000002
diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index 23c0ab74ded..dd1fd51638f 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -112,12 +112,14 @@ struct beacon_parameters {
  * @STATION_FLAG_SHORT_PREAMBLE: station is capable of receiving frames
  *	with short preambles
  * @STATION_FLAG_WME: station is WME/QoS capable
+ * @STATION_FLAG_MFP: station uses management frame protection
  */
 enum station_flags {
 	STATION_FLAG_CHANGED		= 1<<0,
 	STATION_FLAG_AUTHORIZED		= 1<<NL80211_STA_FLAG_AUTHORIZED,
 	STATION_FLAG_SHORT_PREAMBLE	= 1<<NL80211_STA_FLAG_SHORT_PREAMBLE,
 	STATION_FLAG_WME		= 1<<NL80211_STA_FLAG_WME,
+	STATION_FLAG_MFP		= 1<<NL80211_STA_FLAG_MFP,
 };
 
 /**
@@ -355,6 +357,51 @@ enum reg_set_by {
 	REGDOM_SET_BY_COUNTRY_IE,
 };
 
+/**
+ * enum environment_cap - Environment parsed from country IE
+ * @ENVIRON_ANY: indicates country IE applies to both indoor and
+ * 	outdoor operation.
+ * @ENVIRON_INDOOR: indicates country IE applies only to indoor operation
+ * @ENVIRON_OUTDOOR: indicates country IE applies only to outdoor operation
+ */
+enum environment_cap {
+	ENVIRON_ANY,
+	ENVIRON_INDOOR,
+	ENVIRON_OUTDOOR,
+};
+
+/**
+ * struct regulatory_request - receipt of last regulatory request
+ *
+ * @wiphy: this is set if this request's initiator is
+ * 	%REGDOM_SET_BY_COUNTRY_IE or %REGDOM_SET_BY_DRIVER. This
+ * 	can be used by the wireless core to deal with conflicts
+ * 	and potentially inform users of which devices specifically
+ * 	cased the conflicts.
+ * @initiator: indicates who sent this request, could be any of
+ * 	of those set in reg_set_by, %REGDOM_SET_BY_*
+ * @alpha2: the ISO / IEC 3166 alpha2 country code of the requested
+ * 	regulatory domain. We have a few special codes:
+ * 	00 - World regulatory domain
+ * 	99 - built by driver but a specific alpha2 cannot be determined
+ * 	98 - result of an intersection between two regulatory domains
+ * @intersect: indicates whether the wireless core should intersect
+ * 	the requested regulatory domain with the presently set regulatory
+ * 	domain.
+ * @country_ie_checksum: checksum of the last processed and accepted
+ * 	country IE
+ * @country_ie_env: lets us know if the AP is telling us we are outdoor,
+ * 	indoor, or if it doesn't matter
+ */
+struct regulatory_request {
+	struct wiphy *wiphy;
+	enum reg_set_by initiator;
+	char alpha2[2];
+	bool intersect;
+	u32 country_ie_checksum;
+	enum environment_cap country_ie_env;
+};
+
 struct ieee80211_freq_range {
 	u32 start_freq_khz;
 	u32 end_freq_khz;
@@ -431,6 +478,26 @@ struct ieee80211_txq_params {
 	u8 aifs;
 };
 
+/**
+ * struct mgmt_extra_ie_params - Extra management frame IE parameters
+ *
+ * Used to add extra IE(s) into management frames. If the driver cannot add the
+ * requested data into all management frames of the specified subtype that are
+ * generated in kernel or firmware/hardware, it must reject the configuration
+ * call. The IE data buffer is added to the end of the specified management
+ * frame body after all other IEs. This addition is not applied to frames that
+ * are injected through a monitor interface.
+ *
+ * @subtype: Management frame subtype
+ * @ies: IE data buffer or %NULL to remove previous data
+ * @ies_len: Length of @ies in octets
+ */
+struct mgmt_extra_ie_params {
+	u8 subtype;
+	u8 *ies;
+	int ies_len;
+};
+
 /* from net/wireless.h */
 struct wiphy;
 
@@ -450,6 +517,9 @@ struct ieee80211_channel;
  * wireless extensions but this is subject to reevaluation as soon as this
  * code is used more widely and we have a first user without wext.
  *
+ * @suspend: wiphy device needs to be suspended
+ * @resume: wiphy device needs to be resumed
+ *
  * @add_virtual_intf: create a new virtual interface with the given name,
  *	must set the struct wireless_dev's iftype.
  *
@@ -471,6 +541,8 @@ struct ieee80211_channel;
  *
  * @set_default_key: set the default key on an interface
  *
+ * @set_default_mgmt_key: set the default management frame key on an interface
+ *
  * @add_beacon: Add a beacon with given parameters, @head, @interval
  *	and @dtim_period will be valid, @tail is optional.
  * @set_beacon: Change the beacon parameters for an access point mode
@@ -497,8 +569,13 @@ struct ieee80211_channel;
  * @set_txq_params: Set TX queue parameters
  *
  * @set_channel: Set channel
+ *
+ * @set_mgmt_extra_ie: Set extra IE data for management frames
  */
 struct cfg80211_ops {
+	int	(*suspend)(struct wiphy *wiphy);
+	int	(*resume)(struct wiphy *wiphy);
+
 	int	(*add_virtual_intf)(struct wiphy *wiphy, char *name,
 				    enum nl80211_iftype type, u32 *flags,
 				    struct vif_params *params);
@@ -518,6 +595,9 @@ struct cfg80211_ops {
 	int	(*set_default_key)(struct wiphy *wiphy,
 				   struct net_device *netdev,
 				   u8 key_index);
+	int	(*set_default_mgmt_key)(struct wiphy *wiphy,
+					struct net_device *netdev,
+					u8 key_index);
 
 	int	(*add_beacon)(struct wiphy *wiphy, struct net_device *dev,
 			      struct beacon_parameters *info);
@@ -564,6 +644,10 @@ struct cfg80211_ops {
 	int	(*set_channel)(struct wiphy *wiphy,
 			       struct ieee80211_channel *chan,
 			       enum nl80211_channel_type channel_type);
+
+	int	(*set_mgmt_extra_ie)(struct wiphy *wiphy,
+				     struct net_device *dev,
+				     struct mgmt_extra_ie_params *params);
 };
 
 /* temporary wext handlers */
diff --git a/include/net/mac80211.h b/include/net/mac80211.h
index 559422fc094..e2144f0e872 100644
--- a/include/net/mac80211.h
+++ b/include/net/mac80211.h
@@ -207,7 +207,7 @@ struct ieee80211_bss_conf {
 	u16 beacon_int;
 	u16 assoc_capability;
 	u64 timestamp;
-	u64 basic_rates;
+	u32 basic_rates;
 	struct ieee80211_bss_ht_conf ht;
 };
 
@@ -262,6 +262,26 @@ enum mac80211_tx_control_flags {
 	IEEE80211_TX_CTL_RATE_CTRL_PROBE	= BIT(12),
 };
 
+/**
+ * enum mac80211_rate_control_flags - per-rate flags set by the
+ *	Rate Control algorithm.
+ *
+ * These flags are set by the Rate control algorithm for each rate during tx,
+ * in the @flags member of struct ieee80211_tx_rate.
+ *
+ * @IEEE80211_TX_RC_USE_RTS_CTS: Use RTS/CTS exchange for this rate.
+ * @IEEE80211_TX_RC_USE_CTS_PROTECT: CTS-to-self protection is required.
+ *	This is set if the current BSS requires ERP protection.
+ * @IEEE80211_TX_RC_USE_SHORT_PREAMBLE: Use short preamble.
+ * @IEEE80211_TX_RC_MCS: HT rate.
+ * @IEEE80211_TX_RC_GREEN_FIELD: Indicates whether this rate should be used in
+ *	Greenfield mode.
+ * @IEEE80211_TX_RC_40_MHZ_WIDTH: Indicates if the Channel Width should be 40 MHz.
+ * @IEEE80211_TX_RC_DUP_DATA: The frame should be transmitted on both of the
+ *	adjacent 20 MHz channels, if the current channel type is
+ *	NL80211_CHAN_HT40MINUS or NL80211_CHAN_HT40PLUS.
+ * @IEEE80211_TX_RC_SHORT_GI: Short Guard interval should be used for this rate.
+ */
 enum mac80211_rate_control_flags {
 	IEEE80211_TX_RC_USE_RTS_CTS		= BIT(0),
 	IEEE80211_TX_RC_USE_CTS_PROTECT		= BIT(1),
@@ -507,11 +527,6 @@ static inline int __deprecated __IEEE80211_CONF_SHORT_SLOT_TIME(void)
 }
 #define IEEE80211_CONF_SHORT_SLOT_TIME (__IEEE80211_CONF_SHORT_SLOT_TIME())
 
-struct ieee80211_ht_conf {
-	bool enabled;
-	enum nl80211_channel_type channel_type;
-};
-
 /**
  * enum ieee80211_conf_changed - denotes which configuration changed
  *
@@ -520,10 +535,10 @@ struct ieee80211_ht_conf {
  * @IEEE80211_CONF_CHANGE_LISTEN_INTERVAL: the listen interval changed
  * @IEEE80211_CONF_CHANGE_RADIOTAP: the radiotap flag changed
  * @IEEE80211_CONF_CHANGE_PS: the PS flag changed
+ * @IEEE80211_CONF_CHANGE_DYNPS_TIMEOUT: the dynamic PS timeout changed
  * @IEEE80211_CONF_CHANGE_POWER: the TX power changed
- * @IEEE80211_CONF_CHANGE_CHANNEL: the channel changed
+ * @IEEE80211_CONF_CHANGE_CHANNEL: the channel/channel_type changed
  * @IEEE80211_CONF_CHANGE_RETRY_LIMITS: retry limits changed
- * @IEEE80211_CONF_CHANGE_HT: HT configuration changed
  */
 enum ieee80211_conf_changed {
 	IEEE80211_CONF_CHANGE_RADIO_ENABLED	= BIT(0),
@@ -531,10 +546,10 @@ enum ieee80211_conf_changed {
 	IEEE80211_CONF_CHANGE_LISTEN_INTERVAL	= BIT(2),
 	IEEE80211_CONF_CHANGE_RADIOTAP		= BIT(3),
 	IEEE80211_CONF_CHANGE_PS		= BIT(4),
-	IEEE80211_CONF_CHANGE_POWER		= BIT(5),
-	IEEE80211_CONF_CHANGE_CHANNEL		= BIT(6),
-	IEEE80211_CONF_CHANGE_RETRY_LIMITS	= BIT(7),
-	IEEE80211_CONF_CHANGE_HT		= BIT(8),
+	IEEE80211_CONF_CHANGE_DYNPS_TIMEOUT	= BIT(5),
+	IEEE80211_CONF_CHANGE_POWER		= BIT(6),
+	IEEE80211_CONF_CHANGE_CHANNEL		= BIT(7),
+	IEEE80211_CONF_CHANGE_RETRY_LIMITS	= BIT(8),
 };
 
 /**
@@ -547,8 +562,9 @@ enum ieee80211_conf_changed {
  * @listen_interval: listen interval in units of beacon interval
  * @flags: configuration flags defined above
  * @power_level: requested transmit power (in dBm)
+ * @dynamic_ps_timeout: dynamic powersave timeout (in ms)
  * @channel: the channel to tune to
- * @ht: the HT configuration for the device
+ * @channel_type: the channel (HT) type
  * @long_frame_max_tx_count: Maximum number of transmissions for a "long" frame
  *    (a frame not RTS protected), called "dot11LongRetryLimit" in 802.11,
  *    but actually means the number of transmissions not the number of retries
@@ -559,7 +575,7 @@ enum ieee80211_conf_changed {
 struct ieee80211_conf {
 	int beacon_int;
 	u32 flags;
-	int power_level;
+	int power_level, dynamic_ps_timeout;
 
 	u16 listen_interval;
 	bool radio_enabled;
@@ -567,7 +583,7 @@ struct ieee80211_conf {
 	u8 long_frame_max_tx_count, short_frame_max_tx_count;
 
 	struct ieee80211_channel *channel;
-	struct ieee80211_ht_conf ht;
+	enum nl80211_channel_type channel_type;
 };
 
 /**
@@ -630,10 +646,12 @@ struct ieee80211_if_init_conf {
  * @IEEE80211_IFCC_BSSID: The BSSID changed.
  * @IEEE80211_IFCC_BEACON: The beacon for this interface changed
  *	(currently AP and MESH only), use ieee80211_beacon_get().
+ * @IEEE80211_IFCC_BEACON_ENABLED: The enable_beacon value changed.
  */
 enum ieee80211_if_conf_change {
-	IEEE80211_IFCC_BSSID	= BIT(0),
-	IEEE80211_IFCC_BEACON	= BIT(1),
+	IEEE80211_IFCC_BSSID		= BIT(0),
+	IEEE80211_IFCC_BEACON		= BIT(1),
+	IEEE80211_IFCC_BEACON_ENABLED	= BIT(2),
 };
 
 /**
@@ -641,13 +659,16 @@ enum ieee80211_if_conf_change {
  *
  * @changed: parameters that have changed, see &enum ieee80211_if_conf_change.
  * @bssid: BSSID of the network we are associated to/creating.
+ * @enable_beacon: Indicates whether beacons can be sent.
+ *	This is valid only for AP/IBSS/MESH modes.
  *
  * This structure is passed to the config_interface() callback of
  * &struct ieee80211_hw.
  */
 struct ieee80211_if_conf {
 	u32 changed;
-	u8 *bssid;
+	const u8 *bssid;
+	bool enable_beacon;
 };
 
 /**
@@ -655,11 +676,13 @@ struct ieee80211_if_conf {
  * @ALG_WEP: WEP40 or WEP104
  * @ALG_TKIP: TKIP
  * @ALG_CCMP: CCMP (AES)
+ * @ALG_AES_CMAC: AES-128-CMAC
  */
 enum ieee80211_key_alg {
 	ALG_WEP,
 	ALG_TKIP,
 	ALG_CCMP,
+	ALG_AES_CMAC,
 };
 
 /**
@@ -688,12 +711,16 @@ enum ieee80211_key_len {
  *	generation in software.
  * @IEEE80211_KEY_FLAG_PAIRWISE: Set by mac80211, this flag indicates
  *	that the key is pairwise rather then a shared key.
+ * @IEEE80211_KEY_FLAG_SW_MGMT: This flag should be set by the driver for a
+ *	CCMP key if it requires CCMP encryption of management frames (MFP) to
+ *	be done in software.
  */
 enum ieee80211_key_flags {
 	IEEE80211_KEY_FLAG_WMM_STA	= 1<<0,
 	IEEE80211_KEY_FLAG_GENERATE_IV	= 1<<1,
 	IEEE80211_KEY_FLAG_GENERATE_MMIC= 1<<2,
 	IEEE80211_KEY_FLAG_PAIRWISE	= 1<<3,
+	IEEE80211_KEY_FLAG_SW_MGMT	= 1<<4,
 };
 
 /**
@@ -714,8 +741,8 @@ enum ieee80211_key_flags {
  * 	- Temporal Encryption Key (128 bits)
  * 	- Temporal Authenticator Tx MIC Key (64 bits)
  * 	- Temporal Authenticator Rx MIC Key (64 bits)
- * @icv_len: FIXME
- * @iv_len: FIXME
+ * @icv_len: The ICV length for this key type
+ * @iv_len: The IV length for this key type
  */
 struct ieee80211_key_conf {
 	enum ieee80211_key_alg alg;
@@ -759,7 +786,7 @@ enum set_key_cmd {
  *	sizeof(void *), size is determined in hw information.
  */
 struct ieee80211_sta {
-	u64 supp_rates[IEEE80211_NUM_BANDS];
+	u32 supp_rates[IEEE80211_NUM_BANDS];
 	u8 addr[ETH_ALEN];
 	u16 aid;
 	struct ieee80211_sta_ht_cap ht_cap;
@@ -854,10 +881,18 @@ enum ieee80211_tkip_key_type {
  * @IEEE80211_HW_AMPDU_AGGREGATION:
  *	Hardware supports 11n A-MPDU aggregation.
  *
- * @IEEE80211_HW_NO_STACK_DYNAMIC_PS:
- *	Hardware which has dynamic power save support, meaning
- *	that power save is enabled in idle periods, and don't need support
- *	from stack.
+ * @IEEE80211_HW_SUPPORTS_PS:
+ *	Hardware has power save support (i.e. can go to sleep).
+ *
+ * @IEEE80211_HW_PS_NULLFUNC_STACK:
+ *	Hardware requires nullfunc frame handling in stack, implies
+ *	stack support for dynamic PS.
+ *
+ * @IEEE80211_HW_SUPPORTS_DYNAMIC_PS:
+ *	Hardware has support for dynamic PS.
+ *
+ * @IEEE80211_HW_MFP_CAPABLE:
+ *	Hardware supports management frame protection (MFP, IEEE 802.11w).
  */
 enum ieee80211_hw_flags {
 	IEEE80211_HW_RX_INCLUDES_FCS			= 1<<1,
@@ -870,7 +905,10 @@ enum ieee80211_hw_flags {
 	IEEE80211_HW_NOISE_DBM				= 1<<8,
 	IEEE80211_HW_SPECTRUM_MGMT			= 1<<9,
 	IEEE80211_HW_AMPDU_AGGREGATION			= 1<<10,
-	IEEE80211_HW_NO_STACK_DYNAMIC_PS		= 1<<11,
+	IEEE80211_HW_SUPPORTS_PS			= 1<<11,
+	IEEE80211_HW_PS_NULLFUNC_STACK			= 1<<12,
+	IEEE80211_HW_SUPPORTS_DYNAMIC_PS		= 1<<13,
+	IEEE80211_HW_MFP_CAPABLE			= 1<<14,
 };
 
 /**
@@ -890,9 +928,8 @@ enum ieee80211_hw_flags {
  * @workqueue: single threaded workqueue available for driver use,
  *	allocated by mac80211 on registration and flushed when an
  *	interface is removed.
- *	NOTICE: All work performed on this workqueue should NEVER
- *	acquire the RTNL lock (i.e. Don't use the function
- *	ieee80211_iterate_active_interfaces())
+ *	NOTICE: All work performed on this workqueue must not
+ *	acquire the RTNL lock.
  *
  * @priv: pointer to private area that was allocated for driver use
  *	along with this structure.
@@ -952,6 +989,19 @@ struct ieee80211_hw {
 };
 
 /**
+ * wiphy_to_ieee80211_hw - return a mac80211 driver hw struct from a wiphy
+ *
+ * @wiphy: the &struct wiphy which we want to query
+ *
+ * mac80211 drivers can use this to get to their respective
+ * &struct ieee80211_hw. Drivers wishing to get to their own private
+ * structure can then access it via hw->priv. Note that mac802111 drivers should
+ * not use wiphy_priv() to try to get their private driver structure as this
+ * is already used internally by mac80211.
+ */
+struct ieee80211_hw *wiphy_to_ieee80211_hw(struct wiphy *wiphy);
+
+/**
  * SET_IEEE80211_DEV - set device for 802.11 hardware
  *
  * @hw: the &struct ieee80211_hw to set the device for
@@ -1018,16 +1068,12 @@ ieee80211_get_alt_retry_rate(const struct ieee80211_hw *hw,
  *
  * The set_key() callback in the &struct ieee80211_ops for a given
  * device is called to enable hardware acceleration of encryption and
- * decryption. The callback takes an @address parameter that will be
- * the broadcast address for default keys, the other station's hardware
- * address for individual keys or the zero address for keys that will
- * be used only for transmission.
+ * decryption. The callback takes a @sta parameter that will be NULL
+ * for default keys or keys used for transmission only, or point to
+ * the station information for the peer for individual keys.
  * Multiple transmission keys with the same key index may be used when
  * VLANs are configured for an access point.
  *
- * The @local_address parameter will always be set to our own address,
- * this is only relevant if you support multiple local addresses.
- *
  * When transmitting, the TX control data will use the @hw_key_idx
  * selected by the driver by modifying the &struct ieee80211_key_conf
  * pointed to by the @key parameter to the set_key() function.
@@ -1061,6 +1107,42 @@ ieee80211_get_alt_retry_rate(const struct ieee80211_hw *hw,
  */
 
 /**
+ * DOC: Powersave support
+ *
+ * mac80211 has support for various powersave implementations.
+ *
+ * First, it can support hardware that handles all powersaving by
+ * itself, such hardware should simply set the %IEEE80211_HW_SUPPORTS_PS
+ * hardware flag. In that case, it will be told about the desired
+ * powersave mode depending on the association status, and the driver
+ * must take care of sending nullfunc frames when necessary, i.e. when
+ * entering and leaving powersave mode. The driver is required to look at
+ * the AID in beacons and signal to the AP that it woke up when it finds
+ * traffic directed to it. This mode supports dynamic PS by simply
+ * enabling/disabling PS.
+ *
+ * Additionally, such hardware may set the %IEEE80211_HW_SUPPORTS_DYNAMIC_PS
+ * flag to indicate that it can support dynamic PS mode itself (see below).
+ *
+ * Other hardware designs cannot send nullfunc frames by themselves and also
+ * need software support for parsing the TIM bitmap. This is also supported
+ * by mac80211 by combining the %IEEE80211_HW_SUPPORTS_PS and
+ * %IEEE80211_HW_PS_NULLFUNC_STACK flags. The hardware is of course still
+ * required to pass up beacons. Additionally, in this case, mac80211 will
+ * wake up the hardware when multicast traffic is announced in the beacon.
+ *
+ * FIXME: I don't think we can be fast enough in software when we want to
+ *	  receive multicast traffic?
+ *
+ * Dynamic powersave mode is an extension to normal powersave mode in which
+ * the hardware stays awake for a user-specified period of time after sending
+ * a frame so that reply frames need not be buffered and therefore delayed
+ * to the next wakeup. This can either be supported by hardware, in which case
+ * the driver needs to look at the @dynamic_ps_timeout hardware configuration
+ * value, or by the stack if all nullfunc handling is in the stack.
+ */
+
+/**
  * DOC: Frame filtering
  *
  * mac80211 requires to see many management frames for proper
@@ -1172,6 +1254,8 @@ enum ieee80211_ampdu_mlme_action {
  *	configuration in the TX control data. This handler should,
  *	preferably, never fail and stop queues appropriately, more
  *	importantly, however, it must never fail for A-MPDU-queues.
+ *	This function should return NETDEV_TX_OK except in very
+ *	limited cases.
  *	Must be implemented and atomic.
  *
  * @start: Called before the first netdevice attached to the hardware
@@ -1212,9 +1296,12 @@ enum ieee80211_ampdu_mlme_action {
  *
  * @config: Handler for configuration requests. IEEE 802.11 code calls this
  *	function to change hardware configuration, e.g., channel.
+ *	This function should never fail but returns a negative error code
+ *	if it does.
  *
  * @config_interface: Handler for configuration requests related to interfaces
  *	(e.g. BSSID changes.)
+ *	Returns a negative error code which will be seen in userspace.
  *
  * @bss_info_changed: Handler for configuration requests related to BSS
  *	parameters that may vary during BSS's lifespan, and may affect low
@@ -1232,8 +1319,9 @@ enum ieee80211_ampdu_mlme_action {
  *
  * @set_key: See the section "Hardware crypto acceleration"
  *	This callback can sleep, and is only called between add_interface
- *	and remove_interface calls, i.e. while the interface with the
- *	given local_address is enabled.
+ *	and remove_interface calls, i.e. while the given virtual interface
+ *	is enabled.
+ *	Returns a negative error code if the key can't be added.
  *
  * @update_tkip_key: See the section "Hardware crypto acceleration"
  * 	This callback will be called in the context of Rx. Called for drivers
@@ -1245,8 +1333,10 @@ enum ieee80211_ampdu_mlme_action {
  *	bands. When the scan finishes, ieee80211_scan_completed() must be
  *	called; note that it also must be called when the scan cannot finish
  *	because the hardware is turned off! Anything else is a bug!
+ *	Returns a negative error code which will be seen in userspace.
  *
- * @get_stats: return low-level statistics
+ * @get_stats: Return low-level statistics.
+ * 	Returns zero if statistics are available.
  *
  * @get_tkip_seq: If your device implements TKIP encryption in hardware this
  *	callback should be provided to read the TKIP transmit IVs (both IV32
@@ -1260,6 +1350,7 @@ enum ieee80211_ampdu_mlme_action {
  *
  * @conf_tx: Configure TX queue parameters (EDCF (aifs, cw_min, cw_max),
  *	bursting) for a hardware TX queue.
+ *	Returns a negative error code on failure.
  *
  * @get_tx_stats: Get statistics of the current TX queue status. This is used
  *	to get number of currently queued packets (queue length), maximum queue
@@ -1268,7 +1359,11 @@ enum ieee80211_ampdu_mlme_action {
  *	hw->ampdu_queues items.
  *
  * @get_tsf: Get the current TSF timer value from firmware/hardware. Currently,
- *	this is only used for IBSS mode debugging and, as such, is not a
+ *	this is only used for IBSS mode BSSID merging and debugging. Is not a
+ *	required function. Must be atomic.
+ *
+ * @set_tsf: Set the TSF timer to the specified value in the firmware/hardware.
+ *      Currently, this is only used for IBSS mode debugging. Is not a
  *	required function. Must be atomic.
  *
  * @reset_tsf: Reset the TSF timer and allow firmware/hardware to synchronize
@@ -1279,13 +1374,15 @@ enum ieee80211_ampdu_mlme_action {
  * @tx_last_beacon: Determine whether the last IBSS beacon was sent by us.
  *	This is needed only for IBSS mode and the result of this function is
  *	used to determine whether to reply to Probe Requests.
+ *	Returns non-zero if this device sent the last beacon.
  *
  * @ampdu_action: Perform a certain A-MPDU action
  * 	The RA/TID combination determines the destination and TID we want
  * 	the ampdu action to be performed for. The action is defined through
  * 	ieee80211_ampdu_mlme_action. Starting sequence number (@ssn)
- * 	is the first frame we expect to perform the action on. notice
+ * 	is the first frame we expect to perform the action on. Notice
  * 	that TX/RX_STOP can pass NULL for this parameter.
+ *	Returns a negative error code on failure.
  */
 struct ieee80211_ops {
 	int (*tx)(struct ieee80211_hw *hw, struct sk_buff *skb);
@@ -1310,7 +1407,7 @@ struct ieee80211_ops {
 	int (*set_tim)(struct ieee80211_hw *hw, struct ieee80211_sta *sta,
 		       bool set);
 	int (*set_key)(struct ieee80211_hw *hw, enum set_key_cmd cmd,
-		       const u8 *local_address, const u8 *address,
+		       struct ieee80211_vif *vif, struct ieee80211_sta *sta,
 		       struct ieee80211_key_conf *key);
 	void (*update_tkip_key)(struct ieee80211_hw *hw,
 			struct ieee80211_key_conf *conf, const u8 *address,
@@ -1328,6 +1425,7 @@ struct ieee80211_ops {
 	int (*get_tx_stats)(struct ieee80211_hw *hw,
 			    struct ieee80211_tx_queue_stats *stats);
 	u64 (*get_tsf)(struct ieee80211_hw *hw);
+	void (*set_tsf)(struct ieee80211_hw *hw, u64 tsf);
 	void (*reset_tsf)(struct ieee80211_hw *hw);
 	int (*tx_last_beacon)(struct ieee80211_hw *hw);
 	int (*ampdu_action)(struct ieee80211_hw *hw,
@@ -1962,4 +2060,34 @@ rate_lowest_index(struct ieee80211_supported_band *sband,
 int ieee80211_rate_control_register(struct rate_control_ops *ops);
 void ieee80211_rate_control_unregister(struct rate_control_ops *ops);
 
+static inline bool
+conf_is_ht20(struct ieee80211_conf *conf)
+{
+	return conf->channel_type == NL80211_CHAN_HT20;
+}
+
+static inline bool
+conf_is_ht40_minus(struct ieee80211_conf *conf)
+{
+	return conf->channel_type == NL80211_CHAN_HT40MINUS;
+}
+
+static inline bool
+conf_is_ht40_plus(struct ieee80211_conf *conf)
+{
+	return conf->channel_type == NL80211_CHAN_HT40PLUS;
+}
+
+static inline bool
+conf_is_ht40(struct ieee80211_conf *conf)
+{
+	return conf_is_ht40_minus(conf) || conf_is_ht40_plus(conf);
+}
+
+static inline bool
+conf_is_ht(struct ieee80211_conf *conf)
+{
+	return conf->channel_type != NL80211_CHAN_NO_HT;
+}
+
 #endif /* MAC80211_H */
diff --git a/include/net/wireless.h b/include/net/wireless.h
index 21c5d966142..a42c1562d52 100644
--- a/include/net/wireless.h
+++ b/include/net/wireless.h
@@ -181,12 +181,25 @@ struct ieee80211_supported_band {
  * struct wiphy - wireless hardware description
  * @idx: the wiphy index assigned to this item
  * @class_dev: the class device representing /sys/class/ieee80211/<wiphy-name>
- * @fw_handles_regulatory: tells us the firmware for this device
- * 	has its own regulatory solution and cannot identify the
+ * @custom_regulatory: tells us the driver for this device
+ * 	has its own custom regulatory domain and cannot identify the
  * 	ISO / IEC 3166 alpha2 it belongs to. When this is enabled
  * 	we will disregard the first regulatory hint (when the
  * 	initiator is %REGDOM_SET_BY_CORE).
+ * @strict_regulatory: tells us the driver for this device will ignore
+ * 	regulatory domain settings until it gets its own regulatory domain
+ * 	via its regulatory_hint(). After its gets its own regulatory domain
+ * 	it will only allow further regulatory domain settings to further
+ * 	enhance compliance. For example if channel 13 and 14 are disabled
+ * 	by this regulatory domain no user regulatory domain can enable these
+ * 	channels at a later time. This can be used for devices which do not
+ * 	have calibration information gauranteed for frequencies or settings
+ * 	outside of its regulatory domain.
  * @reg_notifier: the driver's regulatory notification callback
+ * @regd: the driver's regulatory domain, if one was requested via
+ * 	the regulatory_hint() API. This can be used by the driver
+ *	on the reg_notifier() if it chooses to ignore future
+ *	regulatory domain changes caused by other drivers.
  */
 struct wiphy {
 	/* assign these fields before you register the wiphy */
@@ -197,7 +210,8 @@ struct wiphy {
 	/* Supported interface modes, OR together BIT(NL80211_IFTYPE_...) */
 	u16 interface_modes;
 
-	bool fw_handles_regulatory;
+	bool custom_regulatory;
+	bool strict_regulatory;
 
 	/* If multiple wiphys are registered and you're handed e.g.
 	 * a regular netdev with assigned ieee80211_ptr, you won't
@@ -209,10 +223,13 @@ struct wiphy {
 	struct ieee80211_supported_band *bands[IEEE80211_NUM_BANDS];
 
 	/* Lets us get back the wiphy on the callback */
-	int (*reg_notifier)(struct wiphy *wiphy, enum reg_set_by setby);
+	int (*reg_notifier)(struct wiphy *wiphy,
+			    struct regulatory_request *request);
 
 	/* fields below are read-only, assigned by cfg80211 */
 
+	const struct ieee80211_regdomain *regd;
+
 	/* the item in /sys/class/ieee80211/ points to this,
 	 * you need use set_wiphy_dev() (see below) */
 	struct device dev;
@@ -361,7 +378,7 @@ ieee80211_get_channel(struct wiphy *wiphy, int freq)
  */
 struct ieee80211_rate *
 ieee80211_get_response_rate(struct ieee80211_supported_band *sband,
-			    u64 basic_rates, int bitrate);
+			    u32 basic_rates, int bitrate);
 
 /**
  * regulatory_hint - driver hint to the wireless core a regulatory domain
@@ -395,4 +412,45 @@ extern void regulatory_hint(struct wiphy *wiphy, const char *alpha2);
 extern void regulatory_hint_11d(struct wiphy *wiphy,
 				u8 *country_ie,
 				u8 country_ie_len);
+
+/**
+ * wiphy_apply_custom_regulatory - apply a custom driver regulatory domain
+ * @wiphy: the wireless device we want to process the regulatory domain on
+ * @regd: the custom regulatory domain to use for this wiphy
+ *
+ * Drivers can sometimes have custom regulatory domains which do not apply
+ * to a specific country. Drivers can use this to apply such custom regulatory
+ * domains. This routine must be called prior to wiphy registration. The
+ * custom regulatory domain will be trusted completely and as such previous
+ * default channel settings will be disregarded. If no rule is found for a
+ * channel on the regulatory domain the channel will be disabled.
+ */
+extern void wiphy_apply_custom_regulatory(
+	struct wiphy *wiphy,
+	const struct ieee80211_regdomain *regd);
+
+/**
+ * freq_reg_info - get regulatory information for the given frequency
+ * @wiphy: the wiphy for which we want to process this rule for
+ * @center_freq: Frequency in KHz for which we want regulatory information for
+ * @bandwidth: the bandwidth requirement you have in KHz, if you do not have one
+ * 	you can set this to 0. If this frequency is allowed we then set
+ * 	this value to the maximum allowed bandwidth.
+ * @reg_rule: the regulatory rule which we have for this frequency
+ *
+ * Use this function to get the regulatory rule for a specific frequency on
+ * a given wireless device. If the device has a specific regulatory domain
+ * it wants to follow we respect that unless a country IE has been received
+ * and processed already.
+ *
+ * Returns 0 if it was able to find a valid regulatory rule which does
+ * apply to the given center_freq otherwise it returns non-zero. It will
+ * also return -ERANGE if we determine the given center_freq does not even have
+ * a regulatory rule for a frequency range in the center_freq's band. See
+ * freq_in_rule_band() for our current definition of a band -- this is purely
+ * subjective and right now its 802.11 specific.
+ */
+extern int freq_reg_info(struct wiphy *wiphy, u32 center_freq, u32 *bandwidth,
+			 const struct ieee80211_reg_rule **reg_rule);
+
 #endif /* __NET_WIRELESS_H */