Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: (123 commits)
  wimax/i2400m: add CREDITS and MAINTAINERS entries
  wimax: export linux/wimax.h and linux/wimax/i2400m.h with headers_install
  i2400m: Makefile and Kconfig
  i2400m/SDIO: TX and RX path backends
  i2400m/SDIO: firmware upload backend
  i2400m/SDIO: probe/disconnect, dev init/shutdown and reset backends
  i2400m/SDIO: header for the SDIO subdriver
  i2400m/USB: TX and RX path backends
  i2400m/USB: firmware upload backend
  i2400m/USB: probe/disconnect, dev init/shutdown and reset backends
  i2400m/USB: header for the USB bus driver
  i2400m: debugfs controls
  i2400m: various functions for device management
  i2400m: RX and TX data/control paths
  i2400m: firmware loading and bootrom initialization
  i2400m: linkage to the networking stack
  i2400m: Generic probe/disconnect, reset and message passing
  i2400m: host/device procotol and core driver definitions
  i2400m: documentation and instructions for usage
  wimax: Makefile, Kconfig and docbook linkage for the stack
  ...

14 files changed, 1806 insertions, 20 deletions

diff --git a/include/linux/Kbuild b/include/linux/Kbuild
index a3323f337e4..12e9a2957ca 100644
--- a/include/linux/Kbuild
+++ b/include/linux/Kbuild
@@ -371,3 +371,5 @@ unifdef-y += xattr.h
 unifdef-y += xfrm.h
 
 objhdr-y += version.h
+header-y += wimax.h
+header-y += wimax/
diff --git a/include/linux/debugfs.h b/include/linux/debugfs.h
index e1a6c046cea..23936b16426 100644
--- a/include/linux/debugfs.h
+++ b/include/linux/debugfs.h
@@ -63,6 +63,8 @@ struct dentry *debugfs_create_x16(const char *name, mode_t mode,
 				  struct dentry *parent, u16 *value);
 struct dentry *debugfs_create_x32(const char *name, mode_t mode,
 				  struct dentry *parent, u32 *value);
+struct dentry *debugfs_create_size_t(const char *name, mode_t mode,
+				     struct dentry *parent, size_t *value);
 struct dentry *debugfs_create_bool(const char *name, mode_t mode,
 				  struct dentry *parent, u32 *value);
 
diff --git a/include/linux/oxu210hp.h b/include/linux/oxu210hp.h
new file mode 100644
index 00000000000..0bf96eae538
--- /dev/null
+++ b/include/linux/oxu210hp.h
@@ -0,0 +1,7 @@
+/* platform data for the OXU210HP HCD */
+
+struct oxu210hp_platform_data {
+	unsigned int bus16:1;
+	unsigned int use_hcd_otg:1;
+	unsigned int use_hcd_sph:1;
+};
diff --git a/include/linux/usb.h b/include/linux/usb.h
index f72aa51f7bc..85ee9be9361 100644
--- a/include/linux/usb.h
+++ b/include/linux/usb.h
@@ -108,6 +108,7 @@ enum usb_interface_condition {
  *	(in probe()), bound to a driver, or unbinding (in disconnect())
  * @is_active: flag set when the interface is bound and not suspended.
  * @sysfs_files_created: sysfs attributes exist
+ * @ep_devs_created: endpoint child pseudo-devices exist
  * @unregistering: flag set when the interface is being unregistered
  * @needs_remote_wakeup: flag set when the driver requires remote-wakeup
  *	capability during autosuspend.
@@ -120,6 +121,11 @@ enum usb_interface_condition {
  *	to the sysfs representation for that device.
  * @pm_usage_cnt: PM usage counter for this interface; autosuspend is not
  *	allowed unless the counter is 0.
+ * @reset_ws: Used for scheduling resets from atomic context.
+ * @reset_running: set to 1 if the interface is currently running a
+ *      queued reset so that usb_cancel_queued_reset() doesn't try to
+ *      remove from the workqueue when running inside the worker
+ *      thread. See __usb_queue_reset_device().
  *
  * USB device drivers attach to interfaces on a physical device.  Each
  * interface encapsulates a single high level function, such as feeding
@@ -164,14 +170,17 @@ struct usb_interface {
 	enum usb_interface_condition condition;		/* state of binding */
 	unsigned is_active:1;		/* the interface is not suspended */
 	unsigned sysfs_files_created:1;	/* the sysfs attributes exist */
+	unsigned ep_devs_created:1;	/* endpoint "devices" exist */
 	unsigned unregistering:1;	/* unregistration is in progress */
 	unsigned needs_remote_wakeup:1;	/* driver requires remote wakeup */
 	unsigned needs_altsetting0:1;	/* switch to altsetting 0 is pending */
 	unsigned needs_binding:1;	/* needs delayed unbind/rebind */
+	unsigned reset_running:1;
 
 	struct device dev;		/* interface specific device info */
 	struct device *usb_dev;
 	int pm_usage_cnt;		/* usage counter for autosuspend */
+	struct work_struct reset_ws;	/* for resets in atomic context */
 };
 #define	to_usb_interface(d) container_of(d, struct usb_interface, dev)
 #define	interface_to_usbdev(intf) \
@@ -329,7 +338,7 @@ struct usb_bus {
 #endif
 	struct device *dev;		/* device for this bus */
 
-#if defined(CONFIG_USB_MON)
+#if defined(CONFIG_USB_MON) || defined(CONFIG_USB_MON_MODULE)
 	struct mon_bus *mon_bus;	/* non-null when associated */
 	int monitored;			/* non-zero when monitored */
 #endif
@@ -398,6 +407,7 @@ struct usb_tt;
  * @urbnum: number of URBs submitted for the whole device
  * @active_duration: total time device is not suspended
  * @autosuspend: for delayed autosuspends
+ * @autoresume: for autoresumes requested while in_interrupt
  * @pm_mutex: protects PM operations
  * @last_busy: time of last use
  * @autosuspend_delay: in jiffies
@@ -476,6 +486,7 @@ struct usb_device {
 
 #ifdef CONFIG_PM
 	struct delayed_work autosuspend;
+	struct work_struct autoresume;
 	struct mutex pm_mutex;
 
 	unsigned long last_busy;
@@ -505,6 +516,7 @@ extern int usb_lock_device_for_reset(struct usb_device *udev,
 
 /* USB port reset for device reinitialization */
 extern int usb_reset_device(struct usb_device *dev);
+extern void usb_queue_reset_device(struct usb_interface *dev);
 
 extern struct usb_device *usb_find_device(u16 vendor_id, u16 product_id);
 
@@ -513,6 +525,8 @@ extern struct usb_device *usb_find_device(u16 vendor_id, u16 product_id);
 extern int usb_autopm_set_interface(struct usb_interface *intf);
 extern int usb_autopm_get_interface(struct usb_interface *intf);
 extern void usb_autopm_put_interface(struct usb_interface *intf);
+extern int usb_autopm_get_interface_async(struct usb_interface *intf);
+extern void usb_autopm_put_interface_async(struct usb_interface *intf);
 
 static inline void usb_autopm_enable(struct usb_interface *intf)
 {
@@ -539,8 +553,13 @@ static inline int usb_autopm_set_interface(struct usb_interface *intf)
 static inline int usb_autopm_get_interface(struct usb_interface *intf)
 { return 0; }
 
+static inline int usb_autopm_get_interface_async(struct usb_interface *intf)
+{ return 0; }
+
 static inline void usb_autopm_put_interface(struct usb_interface *intf)
 { }
+static inline void usb_autopm_put_interface_async(struct usb_interface *intf)
+{ }
 static inline void usb_autopm_enable(struct usb_interface *intf)
 { }
 static inline void usb_autopm_disable(struct usb_interface *intf)
@@ -1050,7 +1069,7 @@ struct usb_device_driver {
 	void (*disconnect) (struct usb_device *udev);
 
 	int (*suspend) (struct usb_device *udev, pm_message_t message);
-	int (*resume) (struct usb_device *udev);
+	int (*resume) (struct usb_device *udev, pm_message_t message);
 	struct usbdrv_wrap drvwrap;
 	unsigned int supports_autosuspend:1;
 };
@@ -1321,7 +1340,7 @@ struct urb {
 	struct kref kref;		/* reference count of the URB */
 	void *hcpriv;			/* private data for host controller */
 	atomic_t use_count;		/* concurrent submissions counter */
-	u8 reject;			/* submissions will fail */
+	atomic_t reject;		/* submissions will fail */
 	int unlinked;			/* unlink error code */
 
 	/* public: documented fields in the urb that can be used by drivers */
@@ -1466,6 +1485,7 @@ extern void usb_poison_urb(struct urb *urb);
 extern void usb_unpoison_urb(struct urb *urb);
 extern void usb_kill_anchored_urbs(struct usb_anchor *anchor);
 extern void usb_poison_anchored_urbs(struct usb_anchor *anchor);
+extern void usb_unpoison_anchored_urbs(struct usb_anchor *anchor);
 extern void usb_unlink_anchored_urbs(struct usb_anchor *anchor);
 extern void usb_anchor_urb(struct urb *urb, struct usb_anchor *anchor);
 extern void usb_unanchor_urb(struct urb *urb);
@@ -1722,10 +1742,6 @@ extern void usb_unregister_notify(struct notifier_block *nb);
 
 #define err(format, arg...) printk(KERN_ERR KBUILD_MODNAME ": " \
 	format "\n" , ## arg)
-#define info(format, arg...) printk(KERN_INFO KBUILD_MODNAME ": " \
-	format "\n" , ## arg)
-#define warn(format, arg...) printk(KERN_WARNING KBUILD_MODNAME ": " \
-	format "\n" , ## arg)
 
 #endif  /* __KERNEL__ */
 
diff --git a/include/linux/usb/association.h b/include/linux/usb/association.h
index 07c5e3cf589..0a4a18b3c1b 100644
--- a/include/linux/usb/association.h
+++ b/include/linux/usb/association.h
@@ -28,17 +28,17 @@ struct wusb_am_attr {
 };
 
 /* Different fields defined by the spec */
-#define WUSB_AR_AssociationTypeId	{ .id = 0x0000, .len =  2 }
-#define WUSB_AR_AssociationSubTypeId	{ .id = 0x0001, .len =  2 }
-#define WUSB_AR_Length			{ .id = 0x0002, .len =  4 }
-#define WUSB_AR_AssociationStatus	{ .id = 0x0004, .len =  4 }
-#define WUSB_AR_LangID			{ .id = 0x0008, .len =  2 }
-#define WUSB_AR_DeviceFriendlyName	{ .id = 0x000b, .len = 64 } /* max */
-#define WUSB_AR_HostFriendlyName	{ .id = 0x000c, .len = 64 } /* max */
-#define WUSB_AR_CHID			{ .id = 0x1000, .len = 16 }
-#define WUSB_AR_CDID			{ .id = 0x1001, .len = 16 }
-#define WUSB_AR_ConnectionContext	{ .id = 0x1002, .len = 48 }
-#define WUSB_AR_BandGroups		{ .id = 0x1004, .len =  2 }
+#define WUSB_AR_AssociationTypeId	{ .id = cpu_to_le16(0x0000), .len = cpu_to_le16(2) }
+#define WUSB_AR_AssociationSubTypeId	{ .id = cpu_to_le16(0x0001), .len = cpu_to_le16(2) }
+#define WUSB_AR_Length			{ .id = cpu_to_le16(0x0002), .len = cpu_to_le16(4) }
+#define WUSB_AR_AssociationStatus	{ .id = cpu_to_le16(0x0004), .len = cpu_to_le16(4) }
+#define WUSB_AR_LangID			{ .id = cpu_to_le16(0x0008), .len = cpu_to_le16(2) }
+#define WUSB_AR_DeviceFriendlyName	{ .id = cpu_to_le16(0x000b), .len = cpu_to_le16(64) } /* max */
+#define WUSB_AR_HostFriendlyName	{ .id = cpu_to_le16(0x000c), .len = cpu_to_le16(64) } /* max */
+#define WUSB_AR_CHID			{ .id = cpu_to_le16(0x1000), .len = cpu_to_le16(16) }
+#define WUSB_AR_CDID			{ .id = cpu_to_le16(0x1001), .len = cpu_to_le16(16) }
+#define WUSB_AR_ConnectionContext	{ .id = cpu_to_le16(0x1002), .len = cpu_to_le16(48) }
+#define WUSB_AR_BandGroups		{ .id = cpu_to_le16(0x1004), .len = cpu_to_le16(2) }
 
 /* CBAF Control Requests (AMS1.0[T4-1] */
 enum {
diff --git a/include/linux/usb/gpio_vbus.h b/include/linux/usb/gpio_vbus.h
new file mode 100644
index 00000000000..d9f03ccc2d6
--- /dev/null
+++ b/include/linux/usb/gpio_vbus.h
@@ -0,0 +1,30 @@
+/*
+ * A simple GPIO VBUS sensing driver for B peripheral only devices
+ * with internal transceivers.
+ * Optionally D+ pullup can be controlled by a second GPIO.
+ *
+ * Copyright (c) 2008 Philipp Zabel <philipp.zabel@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+/**
+ * struct gpio_vbus_mach_info - configuration for gpio_vbus
+ * @gpio_vbus: VBUS sensing GPIO
+ * @gpio_pullup: optional D+ or D- pullup GPIO (else negative/invalid)
+ * @gpio_vbus_inverted: true if gpio_vbus is active low
+ * @gpio_pullup_inverted: true if gpio_pullup is active low
+ *
+ * The VBUS sensing GPIO should have a pulldown, which will normally be
+ * part of a resistor ladder turning a 4.0V-5.25V level on VBUS into a
+ * value the GPIO detects as active.  Some systems will use comparators.
+ */
+struct gpio_vbus_mach_info {
+	int gpio_vbus;
+	int gpio_pullup;
+	bool gpio_vbus_inverted;
+	bool gpio_pullup_inverted;
+};
diff --git a/include/linux/usb/musb.h b/include/linux/usb/musb.h
index 630962c04ca..d6aad0ea603 100644
--- a/include/linux/usb/musb.h
+++ b/include/linux/usb/musb.h
@@ -47,6 +47,11 @@ struct musb_hdrc_config {
 	u8		ram_bits;	/* ram address size */
 
 	struct musb_hdrc_eps_bits *eps_bits;
+#ifdef CONFIG_BLACKFIN
+        /* A GPIO controlling VRSEL in Blackfin */
+        unsigned int    gpio_vrsel;
+#endif
+
 };
 
 struct musb_hdrc_platform_data {
diff --git a/include/linux/usb/otg.h b/include/linux/usb/otg.h
index 1db25d152ad..94df4fe6c6c 100644
--- a/include/linux/usb/otg.h
+++ b/include/linux/usb/otg.h
@@ -84,6 +84,7 @@ extern int otg_set_transceiver(struct otg_transceiver *);
 
 /* for usb host and peripheral controller drivers */
 extern struct otg_transceiver *otg_get_transceiver(void);
+extern void otg_put_transceiver(struct otg_transceiver *);
 
 static inline int
 otg_start_hnp(struct otg_transceiver *otg)
diff --git a/include/linux/usb_usual.h b/include/linux/usb_usual.h
index d9a3bbe38e6..1eea1ab68dc 100644
--- a/include/linux/usb_usual.h
+++ b/include/linux/usb_usual.h
@@ -52,8 +52,11 @@
 	US_FLAG(MAX_SECTORS_MIN,0x00002000)			\
 		/* Sets max_sectors to arch min */		\
 	US_FLAG(BULK_IGNORE_TAG,0x00004000)			\
-		/* Ignore tag mismatch in bulk operations */
-
+		/* Ignore tag mismatch in bulk operations */    \
+	US_FLAG(SANE_SENSE,     0x00008000)			\
+		/* Sane Sense (> 18 bytes) */			\
+	US_FLAG(CAPACITY_OK,	0x00010000)			\
+		/* READ CAPACITY response is correct */
 
 #define US_FLAG(name, value)	US_FL_##name = value ,
 enum { US_DO_ALL_FLAGS };
diff --git a/include/linux/wimax.h b/include/linux/wimax.h
new file mode 100644
index 00000000000..c89de7f4e5b
--- /dev/null
+++ b/include/linux/wimax.h
@@ -0,0 +1,234 @@
+/*
+ * Linux WiMax
+ * API for user space
+ *
+ *
+ * Copyright (C) 2007-2008 Intel Corporation. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ *   * Redistributions of source code must retain the above copyright
+ *     notice, this list of conditions and the following disclaimer.
+ *   * Redistributions in binary form must reproduce the above copyright
+ *     notice, this list of conditions and the following disclaimer in
+ *     the documentation and/or other materials provided with the
+ *     distribution.
+ *   * Neither the name of Intel Corporation nor the names of its
+ *     contributors may be used to endorse or promote products derived
+ *     from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *
+ * Intel Corporation <linux-wimax@intel.com>
+ * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
+ *  - Initial implementation
+ *
+ *
+ * This file declares the user/kernel protocol that is spoken over
+ * Generic Netlink, as well as any type declaration that is to be used
+ * by kernel and user space.
+ *
+ * It is intended for user space to clone it verbatim to use it as a
+ * primary reference for definitions.
+ *
+ * Stuff intended for kernel usage as well as full protocol and stack
+ * documentation is rooted in include/net/wimax.h.
+ */
+
+#ifndef __LINUX__WIMAX_H__
+#define __LINUX__WIMAX_H__
+
+#include <linux/types.h>
+
+enum {
+	/**
+	 * Version of the interface (unsigned decimal, MMm, max 25.5)
+	 * M - Major: change if removing or modifying an existing call.
+	 * m - minor: change when adding a new call
+	 */
+	WIMAX_GNL_VERSION = 00,
+	/* Generic NetLink attributes */
+	WIMAX_GNL_ATTR_INVALID = 0x00,
+	WIMAX_GNL_ATTR_MAX = 10,
+};
+
+
+/*
+ * Generic NetLink operations
+ *
+ * Most of these map to an API call; _OP_ stands for operation, _RP_
+ * for reply and _RE_ for report (aka: signal).
+ */
+enum {
+	WIMAX_GNL_OP_MSG_FROM_USER,	/* User to kernel message */
+	WIMAX_GNL_OP_MSG_TO_USER,	/* Kernel to user message */
+	WIMAX_GNL_OP_RFKILL,	/* Run wimax_rfkill() */
+	WIMAX_GNL_OP_RESET,	/* Run wimax_rfkill() */
+	WIMAX_GNL_RE_STATE_CHANGE,	/* Report: status change */
+};
+
+
+/* Message from user / to user */
+enum {
+	WIMAX_GNL_MSG_IFIDX = 1,
+	WIMAX_GNL_MSG_PIPE_NAME,
+	WIMAX_GNL_MSG_DATA,
+};
+
+
+/*
+ * wimax_rfkill()
+ *
+ * The state of the radio (ON/OFF) is mapped to the rfkill subsystem's
+ * switch state (DISABLED/ENABLED).
+ */
+enum wimax_rf_state {
+	WIMAX_RF_OFF = 0,	/* Radio is off, rfkill on/enabled */
+	WIMAX_RF_ON = 1,	/* Radio is on, rfkill off/disabled */
+	WIMAX_RF_QUERY = 2,
+};
+
+/* Attributes */
+enum {
+	WIMAX_GNL_RFKILL_IFIDX = 1,
+	WIMAX_GNL_RFKILL_STATE,
+};
+
+
+/* Attributes for wimax_reset() */
+enum {
+	WIMAX_GNL_RESET_IFIDX = 1,
+};
+
+
+/*
+ * Attributes for the Report State Change
+ *
+ * For now we just have the old and new states; new attributes might
+ * be added later on.
+ */
+enum {
+	WIMAX_GNL_STCH_IFIDX = 1,
+	WIMAX_GNL_STCH_STATE_OLD,
+	WIMAX_GNL_STCH_STATE_NEW,
+};
+
+
+/**
+ * enum wimax_st - The different states of a WiMAX device
+ * @__WIMAX_ST_NULL: The device structure has been allocated and zeroed,
+ *     but still wimax_dev_add() hasn't been called. There is no state.
+ *
+ * @WIMAX_ST_DOWN: The device has been registered with the WiMAX and
+ *     networking stacks, but it is not initialized (normally that is
+ *     done with 'ifconfig DEV up' [or equivalent], which can upload
+ *     firmware and enable communications with the device).
+ *     In this state, the device is powered down and using as less
+ *     power as possible.
+ *     This state is the default after a call to wimax_dev_add(). It
+ *     is ok to have drivers move directly to %WIMAX_ST_UNINITIALIZED
+ *     or %WIMAX_ST_RADIO_OFF in _probe() after the call to
+ *     wimax_dev_add().
+ *     It is recommended that the driver leaves this state when
+ *     calling 'ifconfig DEV up' and enters it back on 'ifconfig DEV
+ *     down'.
+ *
+ * @__WIMAX_ST_QUIESCING: The device is being torn down, so no API
+ *     operations are allowed to proceed except the ones needed to
+ *     complete the device clean up process.
+ *
+ * @WIMAX_ST_UNINITIALIZED: [optional] Communication with the device
+ *     is setup, but the device still requires some configuration
+ *     before being operational.
+ *     Some WiMAX API calls might work.
+ *
+ * @WIMAX_ST_RADIO_OFF: The device is fully up; radio is off (wether
+ *     by hardware or software switches).
+ *     It is recommended to always leave the device in this state
+ *     after initialization.
+ *
+ * @WIMAX_ST_READY: The device is fully up and radio is on.
+ *
+ * @WIMAX_ST_SCANNING: [optional] The device has been instructed to
+ *     scan. In this state, the device cannot be actively connected to
+ *     a network.
+ *
+ * @WIMAX_ST_CONNECTING: The device is connecting to a network. This
+ *     state exists because in some devices, the connect process can
+ *     include a number of negotiations between user space, kernel
+ *     space and the device. User space needs to know what the device
+ *     is doing. If the connect sequence in a device is atomic and
+ *     fast, the device can transition directly to CONNECTED
+ *
+ * @WIMAX_ST_CONNECTED: The device is connected to a network.
+ *
+ * @__WIMAX_ST_INVALID: This is an invalid state used to mark the
+ *     maximum numeric value of states.
+ *
+ * Description:
+ *
+ * Transitions from one state to another one are atomic and can only
+ * be caused in kernel space with wimax_state_change(). To read the
+ * state, use wimax_state_get().
+ *
+ * States starting with __ are internal and shall not be used or
+ * referred to by drivers or userspace. They look ugly, but that's the
+ * point -- if any use is made non-internal to the stack, it is easier
+ * to catch on review.
+ *
+ * All API operations [with well defined exceptions] will take the
+ * device mutex before starting and then check the state. If the state
+ * is %__WIMAX_ST_NULL, %WIMAX_ST_DOWN, %WIMAX_ST_UNINITIALIZED or
+ * %__WIMAX_ST_QUIESCING, it will drop the lock and quit with
+ * -%EINVAL, -%ENOMEDIUM, -%ENOTCONN or -%ESHUTDOWN.
+ *
+ * The order of the definitions is important, so we can do numerical
+ * comparisons (eg: < %WIMAX_ST_RADIO_OFF means the device is not ready
+ * to operate).
+ */
+/*
+ * The allowed state transitions are described in the table below
+ * (states in rows can go to states in columns where there is an X):
+ *
+ *                                  UNINI   RADIO READY SCAN CONNEC CONNEC
+ *             NULL DOWN QUIESCING TIALIZED  OFF        NING  TING   TED
+ * NULL         -    x
+ * DOWN              -      x        x       x
+ * QUIESCING         x      -
+ * UNINITIALIZED            x        -       x
+ * RADIO_OFF                x                -     x
+ * READY                    x                x     -     x     x      x
+ * SCANNING                 x                x     x     -     x      x
+ * CONNECTING               x                x     x     x     -      x
+ * CONNECTED                x                x     x                  -
+ *
+ * This table not available in kernel-doc because the formatting messes it up.
+ */
+ enum wimax_st {
+	__WIMAX_ST_NULL = 0,
+	WIMAX_ST_DOWN,
+	__WIMAX_ST_QUIESCING,
+	WIMAX_ST_UNINITIALIZED,
+	WIMAX_ST_RADIO_OFF,
+	WIMAX_ST_READY,
+	WIMAX_ST_SCANNING,
+	WIMAX_ST_CONNECTING,
+	WIMAX_ST_CONNECTED,
+	__WIMAX_ST_INVALID			/* Always keep last */
+};
+
+
+#endif /* #ifndef __LINUX__WIMAX_H__ */
diff --git a/include/linux/wimax/Kbuild b/include/linux/wimax/Kbuild
new file mode 100644
index 00000000000..3cb4f269bb0
--- /dev/null
+++ b/include/linux/wimax/Kbuild
@@ -0,0 +1 @@
+header-y += i2400m.h
diff --git a/include/linux/wimax/debug.h b/include/linux/wimax/debug.h
new file mode 100644
index 00000000000..ba0c49399a8
--- /dev/null
+++ b/include/linux/wimax/debug.h
@@ -0,0 +1,453 @@
+/*
+ * Linux WiMAX
+ * Collection of tools to manage debug operations.
+ *
+ *
+ * Copyright (C) 2005-2007 Intel Corporation
+ * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ *
+ *
+ * Don't #include this file directly, read on!
+ *
+ *
+ * EXECUTING DEBUGGING ACTIONS OR NOT
+ *
+ * The main thing this framework provides is decission power to take a
+ * debug action (like printing a message) if the current debug level
+ * allows it.
+ *
+ * The decission power is at two levels: at compile-time (what does
+ * not make it is compiled out) and at run-time. The run-time
+ * selection is done per-submodule (as they are declared by the user
+ * of the framework).
+ *
+ * A call to d_test(L) (L being the target debug level) returns true
+ * if the action should be taken because the current debug levels
+ * allow it (both compile and run time).
+ *
+ * It follows that a call to d_test() that can be determined to be
+ * always false at compile time will get the code depending on it
+ * compiled out by optimization.
+ *
+ *
+ * DEBUG LEVELS
+ *
+ * It is up to the caller to define how much a debugging level is.
+ *
+ * Convention sets 0 as "no debug" (so an action marked as debug level 0
+ * will always be taken). The increasing debug levels are used for
+ * increased verbosity.
+ *
+ *
+ * USAGE
+ *
+ * Group the code in modules and submodules inside each module [which
+ * in most cases maps to Linux modules and .c files that compose
+ * those].
+ *
+ *
+ * For each module, there is:
+ *
+ *  - a MODULENAME (single word, legal C identifier)
+ *
+ *  - a debug-levels.h header file that declares the list of
+ *    submodules and that is included by all .c files that use
+ *    the debugging tools. The file name can be anything.
+ *
+ *  - some (optional) .c code to manipulate the runtime debug levels
+ *    through debugfs.
+ *
+ * The debug-levels.h file would look like:
+ *
+ *     #ifndef __debug_levels__h__
+ *     #define __debug_levels__h__
+ *
+ *     #define D_MODULENAME modulename
+ *     #define D_MASTER 10
+ *
+ *     #include <linux/wimax/debug.h>
+ *
+ *     enum d_module {
+ *             D_SUBMODULE_DECLARE(submodule_1),
+ *             D_SUBMODULE_DECLARE(submodule_2),
+ *             ...
+ *             D_SUBMODULE_DECLARE(submodule_N)
+ *     };
+ *
+ *     #endif
+ *
+ * D_MASTER is the maximum compile-time debug level; any debug actions
+ * above this will be out. D_MODULENAME is the module name (legal C
+ * identifier), which has to be unique for each module (to avoid
+ * namespace collisions during linkage). Note those #defines need to
+ * be done before #including debug.h
+ *
+ * We declare N different submodules whose debug level can be
+ * independently controlled during runtime.
+ *
+ * In a .c file of the module (and only in one of them), define the
+ * following code:
+ *
+ *     struct d_level D_LEVEL[] = {
+ *             D_SUBMODULE_DEFINE(submodule_1),
+ *             D_SUBMODULE_DEFINE(submodule_2),
+ *             ...
+ *             D_SUBMODULE_DEFINE(submodule_N),
+ *     };
+ *     size_t D_LEVEL_SIZE = ARRAY_SIZE(D_LEVEL);
+ *
+ * Externs for d_level_MODULENAME and d_level_size_MODULENAME are used
+ * and declared in this file using the D_LEVEL and D_LEVEL_SIZE macros
+ * #defined also in this file.
+ *
+ * To manipulate from user space the levels, create a debugfs dentry
+ * and then register each submodule with:
+ *
+ *     result = d_level_register_debugfs("PREFIX_", submodule_X, parent);
+ *     if (result < 0)
+ *            goto error;
+ *
+ * Where PREFIX_ is a name of your chosing. This will create debugfs
+ * file with a single numeric value that can be use to tweak it. To
+ * remove the entires, just use debugfs_remove_recursive() on 'parent'.
+ *
+ * NOTE: remember that even if this will show attached to some
+ *     particular instance of a device, the settings are *global*.
+ *
+ *
+ * On each submodule (for example, .c files), the debug infrastructure
+ * should be included like this:
+ *
+ *     #define D_SUBMODULE submodule_x     // matches one in debug-levels.h
+ *     #include "debug-levels.h"
+ *
+ * after #including all your include files.
+ *
+ *
+ * Now you can use the d_*() macros below [d_test(), d_fnstart(),
+ * d_fnend(), d_printf(), d_dump()].
+ *
+ * If their debug level is greater than D_MASTER, they will be
+ * compiled out.
+ *
+ * If their debug level is lower or equal than D_MASTER but greater
+ * than the current debug level of their submodule, they'll be
+ * ignored.
+ *
+ * Otherwise, the action will be performed.
+ */
+#ifndef __debug__h__
+#define __debug__h__
+
+#include <linux/types.h>
+#include <linux/device.h>
+
+
+/* Backend stuff */
+
+/*
+ * Debug backend: generate a message header from a 'struct device'
+ *
+ * @head: buffer where to place the header
+ * @head_size: length of @head
+ * @dev: pointer to device used to generate a header from. If NULL,
+ *     an empty ("") header is generated.
+ */
+static inline
+void __d_head(char *head, size_t head_size,
+	      struct device *dev)
+{
+	if (dev == NULL)
+		head[0] = 0;
+	else if ((unsigned long)dev < 4096) {
+		printk(KERN_ERR "E: Corrupt dev %p\n", dev);
+		WARN_ON(1);
+	} else
+		snprintf(head, head_size, "%s %s: ",
+			 dev_driver_string(dev), dev->bus_id);
+}
+
+
+/*
+ * Debug backend: log some message if debugging is enabled
+ *
+ * @l: intended debug level
+ * @tag: tag to prefix the message with
+ * @dev: 'struct device' associated to this message
+ * @f: printf-like format and arguments
+ *
+ * Note this is optimized out if it doesn't pass the compile-time
+ * check; however, it is *always* compiled. This is useful to make
+ * sure the printf-like formats and variables are always checked and
+ * they don't get bit rot if you have all the debugging disabled.
+ */
+#define _d_printf(l, tag, dev, f, a...)					\
+do {									\
+	char head[64];							\
+	if (!d_test(l))							\
+		break;							\
+	__d_head(head, sizeof(head), dev);				\
+	printk(KERN_ERR "%s%s%s: " f, head, __func__, tag, ##a);	\
+} while (0)
+
+
+/*
+ * CPP sintatic sugar to generate A_B like symbol names when one of
+ * the arguments is a a preprocessor #define.
+ */
+#define __D_PASTE__(varname, modulename) varname##_##modulename
+#define __D_PASTE(varname, modulename) (__D_PASTE__(varname, modulename))
+#define _D_SUBMODULE_INDEX(_name) (D_SUBMODULE_DECLARE(_name))
+
+
+/*
+ * Store a submodule's runtime debug level and name
+ */
+struct d_level {
+	u8 level;
+	const char *name;
+};
+
+
+/*
+ * List of available submodules and their debug levels
+ *
+ * We call them d_level_MODULENAME and d_level_size_MODULENAME; the
+ * macros D_LEVEL and D_LEVEL_SIZE contain the name already for
+ * convenience.
+ *
+ * This array and the size are defined on some .c file that is part of
+ * the current module.
+ */
+#define D_LEVEL __D_PASTE(d_level, D_MODULENAME)
+#define D_LEVEL_SIZE __D_PASTE(d_level_size, D_MODULENAME)
+
+extern struct d_level D_LEVEL[];
+extern size_t D_LEVEL_SIZE;
+
+
+/*
+ * Frontend stuff
+ *
+ *
+ * Stuff you need to declare prior to using the actual "debug" actions
+ * (defined below).
+ */
+
+#ifndef D_MODULENAME
+#error D_MODULENAME is not defined in your debug-levels.h file
+/**
+ * D_MODULE - Name of the current module
+ *
+ * #define in your module's debug-levels.h, making sure it is
+ * unique. This has to be a legal C identifier.
+ */
+#define D_MODULENAME undefined_modulename
+#endif
+
+
+#ifndef D_MASTER
+#warning D_MASTER not defined, but debug.h included! [see docs]
+/**
+ * D_MASTER - Compile time maximum debug level
+ *
+ * #define in your debug-levels.h file to the maximum debug level the
+ * runtime code will be allowed to have. This allows you to provide a
+ * main knob.
+ *
+ * Anything above that level will be optimized out of the compile.
+ *
+ * Defaults to zero (no debug code compiled in).
+ *
+ * Maximum one definition per module (at the debug-levels.h file).
+ */
+#define D_MASTER 0
+#endif
+
+#ifndef D_SUBMODULE
+#error D_SUBMODULE not defined, but debug.h included! [see docs]
+/**
+ * D_SUBMODULE - Name of the current submodule
+ *
+ * #define in your submodule .c file before #including debug-levels.h
+ * to the name of the current submodule as previously declared and
+ * defined with D_SUBMODULE_DECLARE() (in your module's
+ * debug-levels.h) and D_SUBMODULE_DEFINE().
+ *
+ * This is used to provide runtime-control over the debug levels.
+ *
+ * Maximum one per .c file! Can be shared among different .c files
+ * (meaning they belong to the same submodule categorization).
+ */
+#define D_SUBMODULE undefined_module
+#endif
+
+
+/**
+ * D_SUBMODULE_DECLARE - Declare a submodule for runtime debug level control
+ *
+ * @_name: name of the submodule, restricted to the chars that make up a
+ *     valid C identifier ([a-zA-Z0-9_]).
+ *
+ * Declare in the module's debug-levels.h header file as:
+ *
+ * enum d_module {
+ *         D_SUBMODULE_DECLARE(submodule_1),
+ *         D_SUBMODULE_DECLARE(submodule_2),
+ *         D_SUBMODULE_DECLARE(submodule_3),
+ * };
+ *
+ * Some corresponding .c file needs to have a matching
+ * D_SUBMODULE_DEFINE().
+ */
+#define D_SUBMODULE_DECLARE(_name) __D_SUBMODULE_##_name
+
+
+/**
+ * D_SUBMODULE_DEFINE - Define a submodule for runtime debug level control
+ *
+ * @_name: name of the submodule, restricted to the chars that make up a
+ *     valid C identifier ([a-zA-Z0-9_]).
+ *
+ * Use once per module (in some .c file) as:
+ *
+ * static
+ * struct d_level d_level_SUBMODULENAME[] = {
+ *         D_SUBMODULE_DEFINE(submodule_1),
+ *         D_SUBMODULE_DEFINE(submodule_2),
+ *         D_SUBMODULE_DEFINE(submodule_3),
+ * };
+ * size_t d_level_size_SUBDMODULENAME = ARRAY_SIZE(d_level_SUBDMODULENAME);
+ *