Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (53 commits)
  Input: synaptics - fix reporting of min coordinates
  Input: tegra-kbc - enable key autorepeat
  Input: kxtj9 - fix locking typo in kxtj9_set_poll()
  Input: kxtj9 - fix bug in probe()
  Input: intel-mid-touch - remove pointless checking for variable 'found'
  Input: hp_sdc - staticize hp_sdc_kicker()
  Input: pmic8xxx-keypad - fix a leak of the IRQ during init failure
  Input: cy8ctmg110_ts - set reset_pin and irq_pin from platform data
  Input: cy8ctmg110_ts - constify i2c_device_id table
  Input: cy8ctmg110_ts - fix checking return value of i2c_master_send
  Input: lifebook - make dmi callback functions return 1
  Input: atkbd - make dmi callback functions return 1
  Input: gpio_keys - switch to using SIMPLE_DEV_PM_OPS
  Input: gpio_keys - add support for device-tree platform data
  Input: aiptek - remove double define
  Input: synaptics - set minimum coordinates as reported by firmware
  Input: synaptics - process button bits in AGM packets
  Input: synaptics - rename set_slot to be more descriptive
  Input: synaptics - fuzz position for touchpad with reduced filtering
  Input: synaptics - set resolution for MT_POSITION_X/Y axes
  ...

3 files changed, 78 insertions, 11 deletions

diff --git a/include/linux/input.h b/include/linux/input.h
index 771d6d85667..068784e1797 100644
--- a/include/linux/input.h
+++ b/include/linux/input.h
@@ -119,9 +119,9 @@ struct input_keymap_entry {
 #define EVIOCGSND(len)		_IOC(_IOC_READ, 'E', 0x1a, len)		/* get all sounds status */
 #define EVIOCGSW(len)		_IOC(_IOC_READ, 'E', 0x1b, len)		/* get all switch states */
 
-#define EVIOCGBIT(ev,len)	_IOC(_IOC_READ, 'E', 0x20 + ev, len)	/* get event bits */
-#define EVIOCGABS(abs)		_IOR('E', 0x40 + abs, struct input_absinfo)	/* get abs value/limits */
-#define EVIOCSABS(abs)		_IOW('E', 0xc0 + abs, struct input_absinfo)	/* set abs value/limits */
+#define EVIOCGBIT(ev,len)	_IOC(_IOC_READ, 'E', 0x20 + (ev), len)	/* get event bits */
+#define EVIOCGABS(abs)		_IOR('E', 0x40 + (abs), struct input_absinfo)	/* get abs value/limits */
+#define EVIOCSABS(abs)		_IOW('E', 0xc0 + (abs), struct input_absinfo)	/* set abs value/limits */
 
 #define EVIOCSFF		_IOC(_IOC_WRITE, 'E', 0x80, sizeof(struct ff_effect))	/* send a force effect to a force feedback device */
 #define EVIOCRMFF		_IOW('E', 0x81, int)			/* Erase a force effect */
diff --git a/include/linux/input/kxtj9.h b/include/linux/input/kxtj9.h
new file mode 100644
index 00000000000..f6bac89537b
--- /dev/null
+++ b/include/linux/input/kxtj9.h
@@ -0,0 +1,70 @@
+/*
+ * Copyright (C) 2011 Kionix, Inc.
+ * Written by Chris Hudson <chudson@kionix.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
+ * 02111-1307, USA
+ */
+
+#ifndef __KXTJ9_H__
+#define __KXTJ9_H__
+
+#define KXTJ9_I2C_ADDR		0x0F
+
+struct kxtj9_platform_data {
+	unsigned int min_interval;	/* minimum poll interval (in milli-seconds) */
+
+	/*
+	 * By default, x is axis 0, y is axis 1, z is axis 2; these can be
+	 * changed to account for sensor orientation within the host device.
+	 */
+	u8 axis_map_x;
+	u8 axis_map_y;
+	u8 axis_map_z;
+
+	/*
+	 * Each axis can be negated to account for sensor orientation within
+	 * the host device.
+	 */
+	bool negate_x;
+	bool negate_y;
+	bool negate_z;
+
+	/* CTRL_REG1: set resolution, g-range, data ready enable */
+	/* Output resolution: 8-bit valid or 12-bit valid */
+	#define RES_8BIT		0
+	#define RES_12BIT		(1 << 6)
+	u8 res_12bit;
+	/* Output g-range: +/-2g, 4g, or 8g */
+	#define KXTJ9_G_2G		0
+	#define KXTJ9_G_4G		(1 << 3)
+	#define KXTJ9_G_8G		(1 << 4)
+	u8 g_range;
+
+	/* DATA_CTRL_REG: controls the output data rate of the part */
+	#define ODR12_5F		0
+	#define ODR25F			1
+	#define ODR50F			2
+	#define ODR100F			3
+	#define ODR200F			4
+	#define ODR400F			5
+	#define ODR800F			6
+	u8 data_odr_init;
+
+	int (*init)(void);
+	void (*exit)(void);
+	int (*power_on)(void);
+	int (*power_off)(void);
+};
+#endif  /* __KXTJ9_H__ */
diff --git a/include/linux/wm97xx.h b/include/linux/wm97xx.h
index 38e8c4d9289..fd98bb96821 100644
--- a/include/linux/wm97xx.h
+++ b/include/linux/wm97xx.h
@@ -38,7 +38,11 @@
 #define WM97XX_ADCSEL_X		0x1000	/* x coord measurement */
 #define WM97XX_ADCSEL_Y		0x2000	/* y coord measurement */
 #define WM97XX_ADCSEL_PRES	0x3000	/* pressure measurement */
-#define WM97XX_ADCSEL_MASK	0x7000
+#define WM97XX_AUX_ID1		0x4000
+#define WM97XX_AUX_ID2		0x5000
+#define WM97XX_AUX_ID3		0x6000
+#define WM97XX_AUX_ID4		0x7000
+#define WM97XX_ADCSEL_MASK	0x7000	/* ADC selection mask */
 #define WM97XX_COO		0x0800	/* enable coordinate mode */
 #define WM97XX_CTC		0x0400	/* enable continuous mode */
 #define WM97XX_CM_RATE_93	0x0000	/* 93.75Hz continuous rate */
@@ -61,13 +65,6 @@
 #define WM97XX_PRP_DET_DIG	0xc000	/* setect on, digitise on */
 #define WM97XX_RPR		0x2000	/* wake up on pen down */
 #define WM97XX_PEN_DOWN		0x8000	/* pen is down */
-#define WM97XX_ADCSRC_MASK	0x7000	/* ADC source mask */
-
-#define WM97XX_AUX_ID1		0x8001
-#define WM97XX_AUX_ID2		0x8002
-#define WM97XX_AUX_ID3		0x8003
-#define WM97XX_AUX_ID4		0x8004
-
 
 /* WM9712 Bits */
 #define WM9712_45W		0x1000	/* set for 5-wire touchscreen */